Search Results

Search found 2004 results on 81 pages for 'resetting passwords'.

Page 55/81 | < Previous Page | 51 52 53 54 55 56 57 58 59 60 61 62  | Next Page >

  • Facebook Error: "The client token cannot be used for this API" - works on DEV and STAGE but not on LIVE app?

    - by Studio Temp
    I've built a notification sending system that sends notifications to all users of our app, using the app access token. This system is currently running on my localhost. When I configure it with the appid and appsecret for my dev and stage environments, it works fine. But when I put in the appid and appsecret of the LIVE app, I get this error: {"message":"The client token cannot be used for this API", "type":"OAuthException", "code":190} So what's different between dev and live? Dev and Stage are in sandbox mode, Live is not. So I tried disabling sandbox mode on Dev/Stage and they continue to function fine. Dev works fine, Stage works fine, Live gives this error. All other code is the same except for the appid, appsecret, and redirect_uri (changing it to match the domain of each environment). I have checked this post, but unfortunately resetting our appsecret on a site with 1,000,000 users is not something we can do at the moment (too much other functionality relies on it).

    Read the article

  • What is meant by "no password set" for root account (and otthers)?

    - by MMA
    Several years back, we were more accustomed to changing to the root account using the su command. First, we switched to the root account, and then executed those root commands. Now we are more accustomed to using the sudo command. But we know that the root account is there. We can readily find the home directory of user root. $ ls -ld /root/ drwx------ 18 root root 4096 Oct 22 17:21 /root/ Now my point is, it is stated that "the root password in Ubuntu is left unset". Please see the answers to this question. Most of the answers have something to this effect in the first paragraph. One or two answers further state that "the account is left disabled". Now my (primary) questions are, What is meant by an unset password? Is it blank? Is it null? Or something else more cryptic? How does the account becomes enabled once I set password for it? (sudo password root) In order get a better understanding, I checked the /etc/shadow file. Since I have already set a password for the root account, I can no longer see what is there (encrypted password). So, I created another account and left it disabled. The corresponding entry in the /etc/shadow file is, testpassword:!:16020:0:99999:7::: Now perhaps my above queries need to be changed to, what does an ! in password field mean? Other encrypted passwords are those very long cryptic strings. How come this encrypted form is only one character long? And does an account become disabled if I put an ! in the (encrypted) password field?

    Read the article

  • MyLocationOverlay dissappears, is not there onResume.

    - by Paul
    I have a mapView to which I add a MyLocationOverlay. It displays fine when the app starts from scratch (goes through onCreate). If I exit the app (back button) and then start it again (onResume), the overlay is gone. I have tried to fix this for 10+ hours. All sorts of messing with re-adding the overlay. Resetting the overlays. Changing the maps location so it's forced to redraw. Trying to manually invalidate or force a redraw of the overlay. NOTHING has worked. From the way the code looks, the Overlay object exists and everything is working fine - but it's just not on the map. Is anybody else having this problem? (Droid Incredible, 2.2)

    Read the article

  • cannot log in to all account except guest after mounting new partition

    - by student
    I really really need help. to do my homework from school, since two days ago, I was installing oracle 11g on my ubuntu. through that process, there was lots of problems also, but searching a lot, in somehow I could go to the next phase installing it. (because it was the first time to install on ubuntu by myself..) but when I was making password for oracle and clicked next, it says there are not enough space for home/oracle folder, So to make another space, I mounted another space after checking Gparted and using Software device management, I mounted it. And when I rebooted it, since then, I cannot log in to my own administrator account and even to oracle account(that I made for oracle 11g on ubuntu ) when I type the passwords for it, it seems to work but it redisplay the first page to log in, without really logging in it.. So I loggined to here as guest account... and even I cannot try gnome console manipulation to restore or fix it.. because it is guest account... I`m struggling for three days and... help me, how do I need to do? and at the time oracle said it needs enough space for its home folder, how I should have done?

    Read the article

  • How to Change Type of a VARIANT

    - by nimo
    Hi, I'm having a VARIANT with its type set to VT_R8. Subsequently I need to change its type to VT_BSTR. I would like know whether there is a way of resetting a VARIANT status. Thus, I noticed that every time I set value to the VARIANT (in my case, its double) , VARIANT itself set its bstrVal member to a bad pointer, even though I set bstrVal member to NULL at the initialization of VARIANT. Why such thing is happening ? Is it safe to use a VARIANT as structure where both dbVal and bstrVal member are set ? Please clarify, thank you.

    Read the article

  • Boost Shared Pointer: Simultaneous Read Access Across Multiple Threads

    - by Nikhil
    I have a thread A which allocates memory and assigns it to a shared pointer. Then this thread spawns 3 other threads X, Y and Z and passes a copy of the shared pointer to each. When X, Y and Z go out of scope, the memory is freed. But is there a possibility that 2 threads X, Y go out of scope at the exact same point in time and there is a race condition on reference count so instead of decrementing it by 2, it only gets decremented once. So, now the reference count newer drops to 0, so there is a memory leak. Note that, X, Y and Z are only reading the memory. Not writing or resetting the shared pointer. To cut a long story short, can there be a race condition on the reference count and can that lead to memory leaks?

    Read the article

  • Silverlight 4 Binding to ConverterParameter

    - by FrEEzE2046
    Hello everybody, I have a ValueConverter which needs to be called with a dynamic parameter, depending on a property. I can't see a way to do this ... Width="{Binding ActualWidthValue, Source={StaticResource VisibleSize}, Converter={StaticResource Fraction}}" The "Fraction" converter get's (or should get) a parameter of type System.Size, which contains a numerator and denumerator. This value (should) depend on a ItemCollection.Count. Resetting the ItemCollection should reinvoke the Converter with the new values. My first idea was to manually change the ConverterParameter in CodeBehind on the PropertyChanged event of my ItemCollection DependencyProperty. But, as I know now, Silverlight has no GetBinding() method. I heard about GetBindingExpression and tried to do. But MyGrid.GetBindingExpression(Grid.ActualHeightProperty) is always returning null, although the Binding is already established. So, what can I do to reach my target?

    Read the article

  • Programming doesn&rsquo;t have to be Magic

    - by Wes McClure
    In the show LOST, the Swan Station had a button that “had to be pushed” every 100 minutes to avoid disaster.  Several characters in the show took it upon themselves to have faith and religiously push the button, resetting the clock and averting the unknown “disaster”.  There are striking similarities in this story to the code we write every day.  Here are some common ones that I encounter: “I don’t know what it does but the application doesn’t work without it” “I added that code because I saw it in other similar places, I didn’t understand it, but thought it was necessary.” (for consistency, or to make things “work”) “An error message recommended it” “I copied that code” (and didn’t look at what it was doing) “It was suggested in a forum online and it fixed my problem so I left it” In all of these cases we haven’t done our due diligence to understand what the code we are writing is actually doing.  In the rush to get things done it seems like we’re willing to push any button (add any line of code) just to get our desired result and move on.  All of the above explanations are common things we encounter, and are valid ways to work through a problem we have, but when we find a solution to a task we are working on (whether a bug or a feature), we should take a moment to reflect on what we don’t understand.  Remove what isn’t necessary, comprehend and simplify what is.  Why is it detrimental to commit code we don’t understand? Perpetuates unnecessary code If you copy code that isn’t necessary, someone else is more likely to do so, especially peers Perpetuates tech debt Adding unnecessary code leads to extra code that must be understood, maintained and eventually cleaned up in longer lived projects Tech debt begets tech debt as other developers copy or use this code as guidelines in similar situations Increases maintenance How do we know the code is simplified if we don’t understand it? Perpetuates a lack of ownership Makes it seem ok to commit anything so long as it “gets the job done” Perpetuates the notion that programming is magic If we don’t take the time to understand every line of code we add, then we are contributing to the notion that it is simply enough to make the code work, regardless of how. TLDR Don’t commit code that you don’t understand, take the time to understand it, simplify it and then commit it!

    Read the article

  • links for 2010-04-14

    - by Bob Rhubart
    Why business needs should shape IT architecture - McKinsey Quarterly - Business Technology - Organization "Too often, efforts to fix architecture issues remain rooted in a company’s IT practices, culture, and leadership. The reason, in part, is that the chief architect—the overall IT-architecture program leader—is frequently selected from within the technical ranks, bringing deep IT know-how but little direct experience or influence in leading a business-wide change program. A weak linkage to the business creates a void that limits the quality of the resulting IT architecture and the organization’s ability to enforce and sustain the benefits of implementation over time." -- Helge Buckow and Stéphane Rey (tags: architecture it technology enterprise mckinsey) Eric Maurice: April 2010 Critical Patch Update Released Eric Maurice offers the details on April 2010 Critical Patch Update (CPUApr2010), "the first one to include security fixes for Oracle Solaris" (tags: oracle otn database fusionmiddleware peoplesoft security) @shivmohan: Oracle – OAF – Oracle Application Framework – OA Framework "For all the PL/SQL and Oracle Forms developers out there, start planning your evolution. Sure PL/SQL and Forms will be around for some time, but you need to add more skills to your stack if you want to stay current (employable)." -- Shivmohan Purohit (tags: oracle otn application framework) @ORACLENERD: APEX Architecture Oracle ACE Chet Justice offer a "short list of potential architectures" for Oracle APEX, based on his experience with a client. (tags: oracle otn oracleace apex architecture) Luis Moreno Campos: Why is Exadata so fast? "You could find a lot of tech doc around oracle.com, but the bottom line is that the vision to even build a V2 and place it as an OLTP and DW (general purpose) machine is just pure genius." -- Luis Moreno Campos (tags: oracle otn exadata database) Edwin Biemond: Resetting Weblogic datasources with ANT Oracle ACE and Whitehorses architect Edwin Biemond shares an ANT script "to fire some WLST and Python commandos" to correct invalid database session states. (tags: oracle otn oracleace database ANT Python) @deltalounge: The future of MySQL with Oracle Peter Paul van de Beek has compiled an informative collection of Edward Scriven quotes, from various publications, on Oracle's plans for MySQL. (tags: oracle otn database mysql) Cristobal Soto: Coherence Special Interest Group: First Meeting in Toronto, Upcoming Events in New York and California Cameron Purdy, Patrick Peralta, and others are speaking at upcoming Coherence SIG events. Cristobal Soto shares the details. (tags: oracle otn coherence sig grid appserver)

    Read the article

  • CodePlex Daily Summary for Tuesday, February 22, 2011

    CodePlex Daily Summary for Tuesday, February 22, 2011Popular ReleasesSearchable Property Updater for Microsoft Dynamics CRM 2011: Searchable Property Updater (1.0.121.59): Initial releaseJHINFORM7: JHINFORM 7 VR. 0.0.2: Versión 0.0.1 En estado de desarrolloSilverlight????[???]: silverlight????[???]2.0: ???????,?????,????????silverlight????。DBSourceTools: DBSourceTools_1.3.0.0: Release 1.3.0.0 Changed editors from FireEdit to ICSharpCode.TextEditor. Complete re-vamp of Intellisense ( further testing needed). Hightlight Field and Table Names in sql scripts. Added field dropdown on all tables and views in DBExplorer. Added data option for viewing data in Tables. Fixed comment / uncomment bug as reported by tareq. Included Synonyms in scripting engine ( nickt_ch ).IronPython: 2.7 Release Candidate 1: We are pleased to announce the first Release Candidate for IronPython 2.7. This release contains over two dozen bugs fixed in preparation for 2.7 Final. See the release notes for 60193 for details and what has already been fixed in the earlier 2.7 prereleases. - IronPython TeamCaliburn Micro: A Micro-Framework for WPF, Silverlight and WP7: Caliburn.Micro 1.0 RC: This is the official Release Candicate for Caliburn.Micro 1.0. The download contains the binaries, samples and VS templates. VS Templates The templates included are designed for situations where the Caliburn.Micro source needs to be embedded within a single project solution. This was targeted at government and other organizations that expressed specific requirements around using an open source project like this. NuGet This release does not have a corresponding NuGet package. The NuGet pack...Caliburn: A Client Framework for WPF and Silverlight: Caliburn 2.0 RC: This is the official Release Candidate for Caliburn 2.0. It contains all binaries, samples and generated code docs.A2Command: 2011-02-21 - Version 1.0: IntroductionThis is the full release version of A2Command 1.0, dated February 21, 2011. These notes supersede any prior version's notes. All prior releases may be found on the project's website at http://a2command.codeplex.com/releases/ where you can read the release notes for older versions as well as download them. This version of A2Command is intended to replace any previous version you may have downloaded in the past. There were several bug fixes made after Release Candidate 2 and all...Chiave File Encryption: Chiave 0.9: Application for file encryption and decryption using 512 Bit rijndael encyrption algorithm with simple to use UI. Its written in C# and compiled in .Net version 3.5. It incorporates features of Windows 7 like Jumplists, Taskbar progress and Aero Glass. Feedbacks are Welcome!....Rawr: Rawr 4.0.20 Beta: Rawr is now web-based. The link to use Rawr4 is: http://elitistjerks.com/rawr.phpThis is the Cataclysm Beta Release. More details can be found at the following link http://rawr.codeplex.com/Thread/View.aspx?ThreadId=237262 As of the 4.0.16 release, you can now also begin using the new Downloadable WPF version of Rawr!This is a pre-alpha release of the WPF version, there are likely to be a lot of issues. If you have a problem, please follow the Posting Guidelines and put it into the Issue Trac...Azure Storage Samples: Version 1.0 (February 2011): These downloads contain source code. Each is a complete sample that fully exercises Windows Azure Storage across blobs, queues, and tables. The difference between the downloads is implementation approach. Storage DotNet CS.zip is a .NET StorageClient library implementation in the C# language. This library come with the Windows Azure SDK. Contains helper classes for accessing blobs, queues, and tables. Storage REST CS.zip is a REST implementation in the C# language. The code to implement R...MiniTwitter: 1.66: MiniTwitter 1.66 ???? ?? ?????????? 2 ??????????????????? User Streams ?????????Windows Phone 7 Isolated Storage Explorer: WP7 Isolated Storage Explorer v1.0 Beta: Current release features:WPF desktop explorer client Visual Studio integrated tool window explorer client (Visual Studio 2010 Professional and above) Supported operations: Refresh (isolated storage information), Add Folder, Add Existing Item, Download File, Delete Folder, Delete File Explorer supports operations running on multiple remote applications at the same time Explorer detects application disconnect (1-2 second delay) Explorer confirms operation completed status Explorer d...Document.Editor: 2011.6: Whats new for Document.Editor 2011.6: New Left to Right and Left to Right support New Indent more/less support Improved Home tab Improved Tooltips/shortcut keys Minor Bug Fix's, improvements and speed upsCatel - WPF and Silverlight MVVM library: 1.2: Catel history ============= (+) Added (*) Changed (-) Removed (x) Error / bug (fix) For more information about issues or new feature requests, please visit: http://catel.codeplex.com =========== Version 1.2 =========== Release date: ============= 2011/02/17 Added/fixed: ============ (+) DataObjectBase now supports Isolated Storage out of the box: Person.Save(myStream) stores a whole object graph in Silverlight (+) DataObjectBase can now be converted to Json via Person.ToJson(); (+)...??????????: All-In-One Code Framework ??? 2011-02-18: ?????All-In-One Code Framework?2011??????????!!http://i3.codeplex.com/Project/Download/FileDownload.aspx?ProjectName=1code&DownloadId=128165 ?????,?????AzureBingMaps??????,??Azure,WCF, Silverlight, Window Phone????????,????????????????????????。 ???: Windows Azure SQL Azure Windows Azure AppFabric Windows Live Messenger Connect Bing Maps ?????: ??????HTML??? ??Windows PC?Mac?Silverlight??? ??Windows Phone?Silverlight??? ?????:http://blog.csdn.net/sjb5201/archive/2011...Image.Viewer: 2011: First version of 2011Silverlight Toolkit: Silverlight for Windows Phone Toolkit - Feb 2011: Silverlight for Windows Phone Toolkit OverviewSilverlight for Windows Phone Toolkit offers developers additional controls for Windows Phone application development, designed to match the rich user experience of the Windows Phone 7. Suggestions? Features? Questions? Ask questions in the Create.msdn.com forum. Add bugs or feature requests to the Issue Tracker. Help us shape the Silverlight Toolkit with your feedback! Please clearly indicate that the work items and issues are for the phone t...thinktecture WSCF.blue: WSCF.blue V1 Update (1.0.11): Features Added a new option that allows properties on data contract types to be marked as virtual. Bug Fixes Fixed a bug caused by certain project properties not being available on Web Service Software Factory projects. Fixed a bug that could result in the WrapperName value of the MessageContractAttribute being incorrect when the Adjust Casing option is used. The menu item code now caters for CommandBar instances that are not available. For example the Web Item CommandBar does not exist ...Terminals: Version 2 - RC1: The Third build includes the fix for NLA support. A merged in patch dropped the UI support. Its back now. All patch's except 1 are left. Cheers, -Rob The Second build is up. It takes most patch's sent in from the community. One such patch was around security & how the application handles Passwords. You may find that all of your passwords are now invalidated. You may need to reenter all of your credentials. This would be a good time to use the Credential Manager for each connecti...New ProjectsAllTalk: This is a chat client for Windows Phone 7.AssertFramework: AssertFramework is an implementation of Visual Studio/MSTest assert classes. The Asset and StringAssert classes have been implemented so far. CollectionAssert will be implemented next.AsyncInRuby: Async Web Development in RubyAuto Numbering for CRM 4.0: Reuse and standardize Auto Numbering for CRM 4.0BitRaise: Raise money bit by bit!BoxGame: BoxGame is a small project to develop a RPG in XNA.CCI Explorer (An alternative of .NET Reflector): CCI Explorer is an alternative to RedGate Reflector. It use the Microsoft Common Compiler Infrastructure to decompil and view source executable code. The application is writing in WPF and use the MVVM pattern.Configuration Manager Client Health Check Tool: There are many pitfalls with maintaining ConfigMgr managed systems so they install the client software and can continuously report to the hierarchy. This project provides a scripted solution that detects many issues and automates their repair.cppERF: Class ERF function. Test on VC++ 2008 express, and cygwin.CUITe (Coded UI Test enhanced) Framework: CUITe (Coded UI Test enhanced) Framework is a thin layer developed on top of Microsoft Visual Studio Team Test's Coded UI Test engine which helps reduce code, increases readability and maintainability, while also providing a bunch of cool features for the automation engineer.DocMetaMan : Bulk document Upload and MetaData (Taxonomy) Setter: DocMetaMap lets user select a root folder and upload the documents to selected document library in SharePoint 2010. The tool presents a nice GUI prompting the user to select the metadata / taxonomy to be associated with the documents before uploading them to SharePoint. DotNetNuke Azure Accelerator: DNN Azure Accelerator is a project based on the Azure Accelerators Project to publish the famous DotNetNuke Community CMS in the Windows Azure Platform.GK PlatyPi Robotics - Team 2927: Graham-Kapowsin HS Robotics Club's code repository.HgReport: This is a Mercurial reporting engine written in .NET 3.5. The program will allow you to write your own report templates and execute them against a local Mercurial repository to produce text reports, including HTML, with statistics and other items from the repository history.Image Steganography: 'Image Steganography' allows you to embed text and files into images, with optional encryption.im-me-messenger: A simple instant messenger application for the IM-ME messenging gadgetISEFun: PowerShell module(s) to simplify work in it. It contains PowerShell scripts, compiled libs and some formating files. Several modules will come in one batch as optional features.Kailua - The forgotten methods in the ADO.NET API.: Provide standard calls for vendor specific functionality through ADO.NET. Additional functionality includes: enumerate databases, tables, views, columns, stored procedures, parameters; get an autogenerated primary key; return top N rows; and more. Also some non-ADO classes.Linkual: Linkual makes it easier for blog authors to publish their articles in multiple languages. They will no longer have to set up a separate blog for each language. It is developed in C# and ASP.NET MVC.Lumen - Index discovery and querying: Index discovery and querying framework based on Lucene.netMars Rover Exercise: A squad of robotic rovers are to be landed by NASA on a plateau on Mars. This plateau, which is curiously rectangular, must be navigated by the rovers so that their on board cameras can get a complete view of the surrounding terrain to send back to Earth. Message splitting envelope in Biztalk 2009: Message splitting envelope in Biztalk 2009. The project contains: Source code, Examples. Article describing how to develop it: http://www.biztalkbrasil.com.br/2011/02/envelope-sample-using-flat-file.html.Microsoft Dynamics CRM 2011 Development Framework: Framework for developing Microsoft Dynamics CRM 2011 Applications.Potluck Central: Event Manger is a simple place were you can manage your potlucks.PowerSqueakTasks: For now PowerSqueakTasks primary goal is to integrate MsBuild with Powershell. It provides one simple task, that executes Powershell script in a batch manner - creates PS variables using MSBuild item metadata and then runs specified script over them.PSS Airbus Sound Extender: This application offers users of PSS Airbus the sound extension (like electricity, air-conditioning, apu) for standard PSS Airbus 32x planes. Tested with FS2004 and PSS A319. No sound files are distribute with the package, but explaining manual, how to achieve them, is included.SCCM Client Center Automation Library: SCCM Client Automation library (previously smsclictr.automation.dll) is a .NET Library (C#) to automate and access SCCM (Microsoft System Center Configuration Manager) 2007 Agent functions over WMI.Seng 401 Awesome TSS: Telephone switching system for SENG401 course project. Developed in Visual C#.Silverlight????[???]: flyer???????????,????????。????????silverlight??????????。Simple Notify: SimpleNotify is a lightweight client-server implementation that allows you to notify many users in your network with custom messages in a very simple way. There are a couple of ways how you want to push these messages to your clients. SimpleNotify is developed in C#.Slingshot: SlingshotSmartTTS: A smart text to speech app!SystemSoupRMS: SaaS RMStest project101: test source controlUse BizTalk Logging Events in BizUnit Tests: This project will demonstrate how to use the instrumentation from the Microsoft BizTalk CAT Team logging framework to help you test the internals of your BizTalk solutionWalkme HealthVault Application: Walking application for HealthVault.WikiChanges: WikiChanges is a "Recent Changes" monitor for MediaWiki installations that uses non-intrusive, non-annoying yet useful notifications on the corner with link shortcuts to pages, diff, hist, undo and various other links.Win4 Movie Project: This application is being developed for a class group projectWPF UI Authorization infrastructure (MVVM controlled): This infrastructure provide Attribute base authorization for UI elements within WPF applications

    Read the article

  • BizTalk 2009 - Creating a Custom Functoid Library

    - by StuartBrierley
    If you find that you have a need to created multiple Custom Functoids you may also choose to create a Custom Functoid Library - a single project containing many custom functoids.  As previsouly discussed, the Custom Functoid Wizard can be used to create a project with a new custom functoid inside.  But what if you want to extend this project to include more custom functoids and create your Custom Functoid Library?  First create a Custom Functoid Library project and your first Custom Functoid using the Custom Functoid Wizard. When you open your Custom Functoid Library project in Visual Studio you will see that it contains your custom functoid class file along with its resource file.  One of the items this resource file contains is the ID of the the custom functoid.  Each custom functoid needs a unique ID that is over 6000.  When creating a Custom Functoid Library I would first suggest that you delete the ID from this resource file and instead create a _FunctoidIDs class containing constants for each of your custom functoids.  In this way you can easily see which custom functoid IDs are assigned to which custom functoid and which ID is next in the sequence of availability: namespace MyCompany.BizTalk.Functoids.TestFunctoids {     class _FunctoidIDs     {         public const int TestFunctoid                       = 6001;     } } You will then need to update the base() function in your existing functoid class to reference these constant values rather than the current resource file. From:    int functoidID;    // This has to be a number greater than 6000    functoidID = System.Convert.ToInt32(resmgr.GetString("FunctoidId"));    this.ID = functoidID; To: this.ID = _FunctoidIDs.TestFunctoid; To create a new custom functoid you can copy the existing custom functoid, renaming the resultant class file as appropriate.  Once it is renamed you will need to change the Class name, ResourceName reference and Base function name in the class code to those of your new custom functoid.  You will also need to create a new constant value in the _FunctoidIDs class and update the ID reference in your code to match this.  Assuming that you need some different functionalty from your new  customfunctoid you will need to check or amend the following in your functoid class file: Min and Max connections Functoid Category Input and Output connection types The parameters and functionality of the Execute function To change the appearance of you new custom functoid you will need to check or amend the following in the functoid resource file: Name Description Tooltip Exception Icon You can change the String values by double clicking the resource file and amending the value fields in the string table. To amend the functoid icon you will need to create a 16x16 bitmap image.  Once you have saved this you are then ready to import it into the functoid resource file.  In Visual Studio change the resource view to images, right click the icon and choose import from file. You have now completed your new custom functoid and created a Custom Functoid Library.  You can test your new library of functoids by building the project, copying the resultant DLL to C:\Program Files\Microsoft BizTalk Server 2009\Developer Tools\Mapper Extensions and then resetting the toolbox in Visual Studio.

    Read the article

  • Can I prevent an IDENTIFY PACKET DEVICE command to a specific device at boot?

    - by Brian Spisak
    This is related to a previous question related to installation that is now resolved. I'm opening a new question, because I still need to get my DVD drive working. Problem: Failed boot when my ASUS DRW-24B1/ST DVD drive is attached to my asmedia ASM1061. Symptom: ata8.00: exception Emask 0x52 Sact 0x0 SErr 0xffffffff action 0xe frozen ata8: SError: { blah blah } ata8.00: failed command: IDENTIFY PACKET DEVICE ata8.00: cmd blah blah res blah blah (ATA bus error) ata8.00: status: { DRDY } ata8: hard resetting link Background: The ASM1061 is a PCIe to SATA bridge providing 2 x 6Gb/s ports and is supposed to be fully compliant to SATA specs. I just discovered in the fine print of my ASUS P8Z77-V pro motherboard that "These SATA ports are for data hard drivers only. ATAPI devices are not supported." However, I have already installed Windows 7 using this drive and I can run the Ubuntu 12.04 installer from it as well. The only time I have a problem is during Ubuntu boot when it tries an IDENTIFY PACKET DEVICE which seems to be an ATAPI command. I can't simply switch this device to another SATA port because they are already allocated to other devices. (My chipset's 2 x 6Gb/s are connected to my boot SSD and a fast HDD while the 4 x 3Gb/s ports are running a RAID 5 array.) If this can't be fixed or worked around, I suppose I'll have to go buy SATA add-in card. Blech. Thoughts: If indeed this is a device specific issue (that it doesn't support ATAPI discovery) then I can't expect - is it udev? - to work with it. But, it seems that Windows and even the Ubuntu installer work just fine. So why does udev have a problem? At the end of the day, it would be nice to have the DVD working under Ubuntu, but I can live without it. But, as this is a dual-boot machine, I can't physically disconnect it because I want it to work with Windows. (And physically disconnecting it every time I want to boot Ubuntu is NOT an option. ;-) Questions: Should this be considered a bug? My feelings are that if it works with other OS that it should probably work with Ubuntu as well. How can I work around this problem? I have a limited knowledge of linux internals, but it seems I should be able to somehow tell udev (or whatever is doing the discovery) to ignore that device. Is there a way?

    Read the article

  • iwlwifi on lenovo z570 disabled by hardware switch

    - by Kevin Gallagher
    It was working fine with windows 7. The hardware switch is not disabled. I've toggled it back and forth dozens of times. The wifi light never turns on and it always lists as hardware disabled. I have the latest updates installed. I've been searching for solutions, but none of them seem to work for me. I've tried removing acer-wmi. I've tried setting 11n_disable=1. I've tried resetting the bios. I've tried using rfkill to unblock (only removes soft block). I've rebooted dozens of times. The wifi light turns off as soon as grub loads. Edit: I have a usb edimax wireless nic. It shows hardware disabled as well (although rfkill lists as unblocked). If I unload iwlwifi the usb nic works fine. uname -a `Linux xxx-Ideapad-Z570 3.2.0-55-generic #85-Ubuntu SMP Wed Oct 2 12:29:27 UTC 2013 x86_64 x86_64 x86_64 GNU/Linu`x rfkill list 19: phy18: Wireless LAN Soft blocked: no Hard blocked: yes dmesg [43463.022996] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: [43463.023002] Copyright(c) 2003-2011 Intel Corporation [43463.023107] iwlwifi 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [43463.023190] iwlwifi 0000:03:00.0: setting latency timer to 64 [43463.023253] iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000 [43463.023257] iwlwifi 0000:03:00.0: pci_resource_base = ffffc900057c8000 [43463.023261] iwlwifi 0000:03:00.0: HW Revision ID = 0x0 [43463.023797] iwlwifi 0000:03:00.0: irq 43 for MSI/MSI-X [43463.024013] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C [43463.024250] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [43463.045496] iwlwifi 0000:03:00.0: device EEPROM VER=0x15d, CALIB=0x6 [43463.045501] iwlwifi 0000:03:00.0: Device SKU: 0X50 [43463.045504] iwlwifi 0000:03:00.0: Valid Tx ant: 0X1, Valid Rx ant: 0X3 [43463.045542] iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels [43463.045744] iwlwifi 0000:03:00.0: RF_KILL bit toggled to disable radio. [43463.047652] iwlwifi 0000:03:00.0: loaded firmware version 39.31.5.1 build 35138 [43463.047823] Registered led device: phy18-led [43463.047895] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [43463.048037] ieee80211 phy18: Selected rate control algorithm 'iwl-agn-rs' [43463.055533] ADDRCONF(NETDEV_UP): wlan0: link is not ready nm-tool State: connected (global) - Device: wlan0 ---------------------------------------------------------------- Type: 802.11 WiFi Driver: iwlwifi State: unavailable Default: no HW Address: 74:E5:0B:4A:9F:C2 Capabilities: Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points lshw -C network *-network DISABLED description: Wireless interface product: Centrino Wireless-N 1000 [Condor Peak] vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 00 serial: 74:e5:0b:4a:9f:c2 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-55-generic firmware=39.31.5.1 build 35138 latency=0 link=no multicast=yes wireless=IEEE 802.11bg resources: irq:43 memory:f1500000-f1501fff lspci 03:00.0 Network controller: Intel Corporation Centrino Wireless-N 1000 [Condor Peak]

    Read the article

  • Wifi problems after upgrading to 13.10

    - by Simon
    I just upgraded to Ubuntu 13.10, but since the upgrade I don't have internet access via wifi anymore. I can: See networks Connect to a network Ping myself (localhost, 192.168.0.103) I can't: Ping others (including other devices on the same wireless network, including the gateway/router) Resolve hosts Access any other external resource, whether on my own network or on the internet Using Wireshark, I noticed my computer is continuously sending ARP-requests like "Who has 192.168.0.1 [which is the gateway]? Tell 192.168.0.103". It doesn't get any replies though. When I ping another IP-address for which it knows the mac-address (from cache), it turns out a packet loss of 90% occurs, and even if a packet manages to arrive it takes around 3000ms. The output of route -n is: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth1 192.168.0.0 0.0.0.0 255.255.255.0 U 9 0 0 eth1 192.168.122.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0 Before upgrading, wifi worked fine. Using other devices, wifi still works fine.Resetting the router didn't help. Ethernet still works after upgrading. Any suggestions? Update: I'm using the wl driver. Here's the relevant output of some commands: lspci | grep Wireless 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01) cat /etc/modprobe.d/blacklist.conf [...] blacklist mac80211 blacklist brcm80211 blacklist cfg80211 blacklist lib80211_crypt_tkip blacklist lib80211 blacklist b43 cat /etc/rc.local sudo modprobe -r lib80211 sudo insmod /lib/modules/3.2.0-30-generic-pae/kernel/net/wireless/lib80211.ko sudo insmod /lib/modules/3.2.0-30-generic-pae/kernel/net/wireless/lib80211_crypt_wep.ko sudo insmod /lib/modules/3.2.0-30-generic-pae/kernel/net/wireless/lib80211_crypt_tkip.ko sudo insmod /lib/modules/3.2.0-30-generic-pae/kernel/net/wireless/lib80211_crypt_ccmp.ko sudo modprobe wl exit 0 The last lines are probably how I got wireless working after the previous upgrade (wireless has been a problem after each upgrade). Update 2: added information about the exact hardware below. The hardware is an integrated device, so I ran lspci -nn | grep -i network. The output is: 03:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter [14e4:4727] (rev 01)

    Read the article

  • Blank desktop after updates today, only unity2d works now [closed]

    - by NewUbuntuUser
    Possible Duplicate: Unity doesn't load, no Launcher, no Dash appears I have been using 12.04 (wubi) since a week now and this is my 1st exposure to linux. Everything was going on fine till now , but today as soon as I updated through the update manager , docky gave a message that compositing is required or something, and i got an error window which asked me to report the error and then the update manager asked me to reboot. After rebooting , i just get a blank desktop screen , no launcher, no toolbar. I have to restart with the power key. However if i login through Unity 2d everything is fine except the benefits of the 3d environment. I guess something got messed up after the update and i cant figure out which program or file caused this mess. I would highly appreciate if someone could help me out with this as I really liked working on ubuntu after windows 7. Thanks! SOLVED-- Thanks @jrg for the link provided.. it helped me to come out of this mess. Actually some update of compizconfig made the unity plugin inactive did something to the Animation add ons , the one which you use for the burn effect etc. What i did was : On the blank desktop Pressed keys Ctrl + Alt + T to bring up the terminal and typed ccsm This brought up the compiz config system manager, there i enabled the unity plugin and rebooted. Everything started working fine. But then again when i started the addons plugin ,everything went back to square one.. :( . This time pressing Ctrl + Alt + T also did not help. Then i tried Ctrl + Alt + F1 , it brought up a terminal or whatever u call it, and then i typed unity --reset , it did some resetting and in the end it showed some comositing done , I pressed Ctrl + Alt + F7 to come back to the desktop , and here it was , my old sweet desktop.. it had the animation effects too like wobbly windows, excepting the addons like the burn effect, i guess something got wrong with the last update of that addon plugin and now whenever i try turning that on , everything goes poof!! 6 hours wasted , but i guess i learnt something new.. not bad for an orthodontist i guess :))

    Read the article

  • "shutting down hyper-v virtual machine management service"

    - by icelava
    I have a Windows 2008 R2 server that is a Hyper-V host (Dell PowerEdge T300). Today for the first time I encountered an odd situation; i lost connection with one of the guest machines but logging on physically it seems the guest OS is still running but no longer contactable via the network. I tried to shut down the guest machine (Windows XP) but it would not shut down, getting stuck in a "Not responding" dialog box that cannot be dismissed. I used the Hyper-V management console to reset the machine and it could not get out of resetting state. I tried to save another Windows 2003 guest machine, and it would be progress with its Saving state (0%). The other running Windows 2003 guest was stuck in the logon dialog. My first suspicion is perhaps one of the Windows update patches this week (10 Nov 2011) may something to do with it, which was still pending a system restart. Well, since I could not do anything with Hyper-V i proceeded with the Windows Update restart, and now it is stuck half an hour at "Shutting down hyper-v virtual machine management service" Prior to restarting I did not observe any hard disk errors reported in the system event log; doubt it is a disk-related condition. Shall I force a hard reboot? UPDATE As per answer report, it eventually restarted itself.

    Read the article

  • This operation has been canceled due to restrictions in effect on this computer. Please contact your

    - by WebDude
    I am having a highly annoying problem on Windows 7 with Microsoft Outlook 2007. Whenever I click on any hyperlinks I am present with the message This operation has been canceled due to restrictions in effect on this computer. Please contact your system administrator and let's not forget the most ear-piecing "DING" to accompany this wonderful informative message. Now I have searched the web high and low for a solution here and most sources suggest the same solution of resetting your IE as your default browser. Tried .. failed A lot of sources suggest this has something to do with installing and uninstalling chrome. I have never installed Chrome but am actually consdering this to see if it by some chance fixes my computer. A lot of sources also point to a microsoft kb article 325478 which is focused around Windows XP and totally unrelated to my problem. I see there are some other queries on SuperUser with no resolution. Please can someone help solve this highly annoying issue. I am running Window 7 professional x64 Microsoft Office 2007 Microsoft Security Essentials Running in a windows work group with default policy settings HELP!

    Read the article

  • Problem setting up Master-Master Replication in MySQL

    - by Andrew
    I am attempting to setup Master-Master Replication on two MySQL database servers. I have followed the steps in this guide, but it fails in the middle of Step 4 with SHOW MASTER STATUS; It simply returns an empty set. I get the same 3 errors in both servers' logs. MySQL errors on SQL1: [ERROR] Failed to open the relay log './sql1-relay-bin.000001' (relay_log_pos 4) [ERROR] Could not find target log during relay log initialization [ERROR] Failed to initialize the master info structure MySQL Errors on SQL2: [ERROR] Failed to open the relay log './sql2-relay-bin.000001' (relay_log_pos 4) [ERROR] Could not find target log during relay log initialization [ERROR] Failed to initialize the master info structure The errors make no sense because I'm not referencing those files in any of my configurations. I'm using Ubuntu Server 10.04 x64 and my configuration files are copied below. I don't know where to go from here or how to troubleshoot this. Please help. Thanks. /etc/mysql/my.cnf on SQL1: # # The MySQL database server configuration file. # # You can copy this to one of: # - "/etc/mysql/my.cnf" to set global options, # - "~/.my.cnf" to set user-specific options. # # One can use all long options that the program supports. # Run program with --help to get a list of available options and with # --print-defaults to see which it would actually understand and use. # # For explanations see # http://dev.mysql.com/doc/mysql/en/server-system-variables.html # This will be passed to all mysql clients # It has been reported that passwords should be enclosed with ticks/quotes # escpecially if they contain "#" chars... # Remember to edit /etc/mysql/debian.cnf when changing the socket location. [client] port = 3306 socket = /var/run/mysqld/mysqld.sock # Here is entries for some specific programs # The following values assume you have at least 32M ram # This was formally known as [safe_mysqld]. Both versions are currently parsed. [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] # # * Basic Settings # # # * IMPORTANT # If you make changes to these settings and your system uses apparmor, you may # also need to also adjust /etc/apparmor.d/usr.sbin.mysqld. # user = mysql socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp skip-external-locking # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. bind-address = <SQL1's IP> # # * Fine Tuning # key_buffer = 16M max_allowed_packet = 16M thread_stack = 192K thread_cache_size = 8 # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP #max_connections = 100 #table_cache = 64 #thread_concurrency = 10 # # * Query Cache Configuration # query_cache_limit = 1M query_cache_size = 16M # # * Logging and Replication # # Both location gets rotated by the cronjob. # Be aware that this log type is a performance killer. # As of 5.1 you can enable the log at runtime! #general_log_file = /var/log/mysql/mysql.log #general_log = 1 log_error = /var/log/mysql/error.log # Here you can see queries with especially long duration #log_slow_queries = /var/log/mysql/mysql-slow.log #long_query_time = 2 #log-queries-not-using-indexes # # The following can be used as easy to replay backup logs or for replication. # note: if you are setting up a replication slave, see README.Debian about # other settings you may need to change. server-id = 1 replicate-same-server-id = 0 auto-increment-increment = 2 auto-increment-offset = 1 master-host = <SQL2's IP> master-user = slave_user master-password = "slave_password" master-connect-retry = 60 replicate-do-db = db1 log-bin= /var/log/mysql/mysql-bin.log binlog-do-db = db1 binlog-ignore-db = mysql relay-log = /var/lib/mysql/slave-relay.log relay-log-index = /var/lib/mysql/slave-relay-log.index expire_logs_days = 10 max_binlog_size = 500M # # * InnoDB # # InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/. # Read the manual for more InnoDB related options. There are many! # # * Security Features # # Read the manual, too, if you want chroot! # chroot = /var/lib/mysql/ # # For generating SSL certificates I recommend the OpenSSL GUI "tinyca". # # ssl-ca=/etc/mysql/cacert.pem # ssl-cert=/etc/mysql/server-cert.pem # ssl-key=/etc/mysql/server-key.pem [mysqldump] quick quote-names max_allowed_packet = 16M [mysql] #no-auto-rehash # faster start of mysql but no tab completition [isamchk] key_buffer = 16M # # * IMPORTANT: Additional settings that can override those from this file! # The files must end with '.cnf', otherwise they'll be ignored. # !includedir /etc/mysql/conf.d/ /etc/mysql/my.cnf on SQL2: # # The MySQL database server configuration file. # # You can copy this to one of: # - "/etc/mysql/my.cnf" to set global options, # - "~/.my.cnf" to set user-specific options. # # One can use all long options that the program supports. # Run program with --help to get a list of available options and with # --print-defaults to see which it would actually understand and use. # # For explanations see # http://dev.mysql.com/doc/mysql/en/server-system-variables.html # This will be passed to all mysql clients # It has been reported that passwords should be enclosed with ticks/quotes # escpecially if they contain "#" chars... # Remember to edit /etc/mysql/debian.cnf when changing the socket location. [client] port = 3306 socket = /var/run/mysqld/mysqld.sock # Here is entries for some specific programs # The following values assume you have at least 32M ram # This was formally known as [safe_mysqld]. Both versions are currently parsed. [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] # # * Basic Settings # # # * IMPORTANT # If you make changes to these settings and your system uses apparmor, you may # also need to also adjust /etc/apparmor.d/usr.sbin.mysqld. # user = mysql socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp skip-external-locking # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. bind-address = <SQL2's IP> # # * Fine Tuning # key_buffer = 16M max_allowed_packet = 16M thread_stack = 192K thread_cache_size = 8 # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP #max_connections = 100 #table_cache = 64 #thread_concurrency = 10 # # * Query Cache Configuration # query_cache_limit = 1M query_cache_size = 16M # # * Logging and Replication # # Both location gets rotated by the cronjob. # Be aware that this log type is a performance killer. # As of 5.1 you can enable the log at runtime! #general_log_file = /var/log/mysql/mysql.log #general_log = 1 log_error = /var/log/mysql/error.log # Here you can see queries with especially long duration #log_slow_queries = /var/log/mysql/mysql-slow.log #long_query_time = 2 #log-queries-not-using-indexes # # The following can be used as easy to replay backup logs or for replication. # note: if you are setting up a replication slave, see README.Debian about # other settings you may need to change. server-id = 2 replicate-same-server-id = 0 auto-increment-increment = 2 auto-increment-offset = 2 master-host = <SQL1's IP> master-user = slave_user master-password = "slave_password" master-connect-retry = 60 replicate-do-db = db1 log-bin= /var/log/mysql/mysql-bin.log binlog-do-db = db1 binlog-ignore-db = mysql relay-log = /var/lib/mysql/slave-relay.log relay-log-index = /var/lib/mysql/slave-relay-log.index expire_logs_days = 10 max_binlog_size = 500M # # * InnoDB # # InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/. # Read the manual for more InnoDB related options. There are many! # # * Security Features # # Read the manual, too, if you want chroot! # chroot = /var/lib/mysql/ # # For generating SSL certificates I recommend the OpenSSL GUI "tinyca". # # ssl-ca=/etc/mysql/cacert.pem # ssl-cert=/etc/mysql/server-cert.pem # ssl-key=/etc/mysql/server-key.pem [mysqldump] quick quote-names max_allowed_packet = 16M [mysql] #no-auto-rehash # faster start of mysql but no tab completition [isamchk] key_buffer = 16M # # * IMPORTANT: Additional settings that can override those from this file! # The files must end with '.cnf', otherwise they'll be ignored. # !includedir /etc/mysql/conf.d/

    Read the article

  • Can't access SQL Server 2008 from workstations, but can from server

    - by Kev
    We have an app that can use mssql2k or 2k8. We've been using 2k but I decided to try 2k8 to compare. I installed in on our win2k3 server alongside mssql2k. In the ODBC applet on the server, I was able to set up access to 2k8, and it passes the test at the end successfully, whether I tell it to use Windows Authentication or an sql login. The latter is how the app always accessed mssql2k. The app works fine from the server, but when I try it on a workstation (winxpsp3), I get a window titled, "Microsoft SQL Server Login" that says: Connection failed: SQLState: '01000' SQL Server Error: 53 [Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (Connect()). Connection failed: SQLState: '08001' SQL Server ERror: 17 [Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied. Then I get the ODBC login dialog, which I can't get to login correctly (I just keep getting the same error above), even copying and pasting a password after resetting it on the server, and whether "trusted" is checked or not. "Options" is disabled. The server was straight SERVERNAME for mssql2k, but for mssql2k8 it's called SERVERNAME\mssql2008. That works on the server, why not on the workstation? (Which I'm logged in as the same person on, BTW.)

    Read the article

  • Account Lockout with pam_tally2 in RHEL6

    - by Aaron Copley
    I am using pam_tally2 to lockout accounts after 3 failed logins per policy, however, the connecting user does not receive the error indicating pam_tally2's action. (Via SSH.) I expect to see on the 4th attempt: Account locked due to 3 failed logins No combination of required or requisite or the order in the file seems to help. This is under Red Hat 6, and I am using /etc/pam.d/password-auth. The lockout does work as expected but the user does not receive the error described above. This causes a lot of confusion and frustration as they have no way of knowing why authentication fails when they are sure they are using the correct password. Implementation follows NSA's Guide to the Secure Conguration of Red Hat Enterprise Linux 5. (pg.45) It's my understanding that that only thing changed in PAM is that /etc/pam.d/sshd now includes /etc/pam.d/password-auth instead of system-auth. If locking out accounts after a number of incorrect login attempts is required by your security policy, implement use of pam_tally2.so. To enforce password lockout, add the following to /etc/pam.d/system-auth. First, add to the top of the auth lines: auth required pam_tally2.so deny=5 onerr=fail unlock_time=900 Second, add to the top of the account lines: account required pam_tally2.so EDIT: I get the error message by resetting pam_tally2 during one of the login attempts. user@localhost's password: (bad password) Permission denied, please try again. user@localhost's password: (bad password) Permission denied, please try again. (reset pam_tally2 from another shell) user@localhost's password: (good password) Account locked due to ... Account locked due to ... Last login: ... [user@localhost ~]$

    Read the article

  • BSOD Dump - EXCEPTION_DOUBLE_FAULT - ON Windows 2008 Server 64bit

    - by Mark K
    Hello, my windows 2008 server (datacenter ed) 64bit , have recently created a series of BSOD on a different applications. the error message is in general EXCEPTION_DOUBLE_FAULT. Can anyone please help with the analysis of the dump file bellow- Best regards, Mark 2: kd !analyze -v * Bugcheck Analysis * * UNEXPECTED_KERNEL_MODE_TRAP (7f) This means a trap occurred in kernel mode, and it's a trap of a kind that the kernel isn't allowed to have/catch (bound trap) or that is always instant death (double fault). The first number in the bugcheck params is the number of the trap (8 = double fault, etc) Consult an Intel x86 family manual to learn more about what these traps are. Here is a portion of those codes: If kv shows a taskGate use .tss on the part before the colon, then kv. Else if kv shows a trapframe use .trap on that value Else .trap on the appropriate frame will show where the trap was taken (on x86, this will be the ebp that goes with the procedure KiTrap) Endif kb will then show the corrected stack. Arguments: Arg1: 0000000000000008, EXCEPTION_DOUBLE_FAULT Arg2: 0000000080050033 Arg3: 00000000000006f8 Arg4: fffff800018b1678 Debugging Details: BUGCHECK_STR: 0x7f_8 CUSTOMER_CRASH_COUNT: 1 DEFAULT_BUCKET_ID: DRIVER_FAULT_SERVER_MINIDUMP PROCESS_NAME: CustomerService. CURRENT_IRQL: 1 EXCEPTION_RECORD: fffffa6004e45568 -- (.exr 0xfffffa6004e45568) ExceptionAddress: fffff800018a0150 (nt!RtlVirtualUnwind+0x0000000000000250) ExceptionCode: 10000004 ExceptionFlags: 00000000 NumberParameters: 2 Parameter[0]: 0000000000000000 Parameter[1]: 00000000000000d8 TRAP_FRAME: fffffa6004e45610 -- (.trap 0xfffffa6004e45610) NOTE: The trap frame does not contain all registers. Some register values may be zeroed or incorrect. rax=0000000000000050 rbx=0000000000000000 rcx=0000000000000004 rdx=00000000000000d8 rsi=0000000000000000 rdi=0000000000000000 rip=fffff800018a0150 rsp=fffffa6004e457a0 rbp=fffffa6004e459e0 r8=0000000000000006 r9=fffff8000181e000 r10=ffffffffffffff88 r11=fffff80001a1c000 r12=0000000000000000 r13=0000000000000000 r14=0000000000000000 r15=0000000000000000 iopl=0 nv up ei pl zr na po nc nt!RtlVirtualUnwind+0x250: fffff800018a0150 488b02 mov rax,qword ptr [rdx] ds:00000000000000d8=???????????????? Resetting default scope LAST_CONTROL_TRANSFER: from fffff800018781ee to fffff80001878450 STACK_TEXT: fffffa6001768a68 fffff800018781ee : 000000000000007f 0000000000000008 0000000080050033 00000000000006f8 : nt!KeBugCheckEx fffffa6001768a70 fffff80001876a38 : 0000000000000000 0000000000000000 0000000000000000 0000000000000000 : nt!KiBugCheckDispatch+0x6e fffffa6001768bb0 fffff800018b1678 : 0000000000000000 0000000000000000 0000000000000000 0000000000000000 : nt!KiDoubleFaultAbort+0xb8 fffffa6004e44e30 fffff800018782a9 : fffffa6004e45568 0000000000000001 fffffa6004e45610 000000000000023b : nt!KiDispatchException+0x34 fffffa6004e45430 fffff800018770a5 : 0000000000000000 0000000000000000 0000000000000000 0000000000000001 : nt!KiExceptionDispatch+0xa9 fffffa6004e45610 fffff800018a0150 : fffffa6004e46638 fffffa6004e46010 fffff80001965190 fffff8000181e000 : nt!KiPageFault+0x1e5 fffffa6004e457a0 fffff800018a3f78 : fffffa6000000001 0000000000000000 0000000000000000 ffffffffffffff88 : nt!RtlVirtualUnwind+0x250 fffffa6004e45810 fffff800018b1706 : fffffa6004e46638 fffffa6004e46010 fffffa6000000000 0000000000000000 : nt!RtlDispatchException+0x118 fffffa6004e45f00 0000000000000000 : 0000000000000000 0000000000000000 0000000000000000 0000000000000000 : nt!KiDispatchException+0xc2 STACK_COMMAND: kb FOLLOWUP_IP: nt!KiDoubleFaultAbort+b8 fffff800`01876a38 90 nop SYMBOL_STACK_INDEX: 2 SYMBOL_NAME: nt!KiDoubleFaultAbort+b8 FOLLOWUP_NAME: MachineOwner MODULE_NAME: nt IMAGE_NAME: ntkrnlmp.exe DEBUG_FLR_IMAGE_TIMESTAMP: 4a7801eb FAILURE_BUCKET_ID: X64_0x7f_8_nt!KiDoubleFaultAbort+b8 BUCKET_ID: X64_0x7f_8_nt!KiDoubleFaultAbort+b8 Followup: MachineOwner

    Read the article

  • The boot selection failed because a required device is inaccessible 0xc000000e

    - by bbodenmiller
    A family member of mine recently went on vacation and turned off their computer, something they normally do not do, upon returning home it would not turn on and now returns the error message below. Generally friends and family come to me for help with computers and I have no problem, however this time I am a bit stumped. Any suggestions would be greatly appreciated. As you can see the error message is: Status: 0xc000000e Info: The best selection failed because a required device is inaccessible. Before going to this error message it briefly flashes the Windows loading screen. I have been able to confirm through the Windows RE Command Line and the dir command that the C: drive is accessible and likely is just suffering a bootup issue. I have tried: Launching the repair process discussed in the error message three times however each time it requires a restart and then returns to the same error message. Changing the boot order to be hard drive first Getting into safe mode; F8 just results in the same error message before I can get to the menu to select safe mode I have checked to make sure the BCD (bcdedit, Boot Configuration Data) is still intact as per https://www.symantec.com/business/support/index?page=content&id=TECH160475 I plan to try (but would like additional comments on): sfc /scannow; requires a restart and thus will likely result in the error message again A memory scan Bootrec as per http://support.microsoft.com/kb/927392#method1 Swapping IDE cables/ports Resetting the BIOS I noticed others with similar issues around the web are dual-booting however this machine is not setup in a dual-boot environment. Additionally at one point this error message supposedly showed up before I started working on the computer: The instruction at 0xfbe2584d referenced memory at 0x00000008. The memory could not be read. As previously stated any additional suggestions or words of advice would be greatly apprecaited.

    Read the article

  • Debugging UI Problems in IE8 (Was IE8 on Windows 7 Authentication Mess)

    - by alharaka
    UPDATE: I think the real question I need to ask here is: how does a technician debug UI problems with Internet Explorer, and not HTML rendering issues that have pretty good tools? I am aware of the SysInternals tools and others mentioned below, but maybe I am not harnessing their power properly. Someone else in the TechNet forum I mentioned had a similar issue. Again, I have lots of data, I am not sure how to properly interpret it. ORIGINAL POST: So I tried the venerable Technet Forums to solve this isse. In short, the Windows Security dialog has no place to put credentials, rendering pretty much useless. This happens to apply for a whole bunch of our intranet websites, and only a select number of users with a few laptops have this problem. It ends up looking like this. Things I have tried so far: Disabling local Group Policy (not domain connected) Disabling local Security Policy Resetting IE settings A few system restores Re-registering a bunch of IE DLL's and all other steps here Reinstalling IE8 (dism /online /disable-feature /featurename:"internet-explorer-optional-x86, reboot, dism /online /enable-feature /featurename:"internet-explorer-optional-x86, and reboot) And SFC scan, which found nothing Still, nothing. Not only am I fed up, but I have begun to really work with APIExplorer and Procmon as mentioned in the Technet original because I want to know WHAT is happening, not just fix it. Any thoughts?

    Read the article

  • Finding cause of TCP retransmission within a LAN

    - by Surreal
    Hello denizens of Server Fault I have an irritating problem with a LAN of about 100 computers, 2 Windows domain servers, and 12 VoIP phones. Since their installation around a year ago, every week or so, we notice a VoIP phone resetting itself - occasionally in the middle of a call. Simultaneously there are often signs of temporary loss of connection on computers: freezes in explorer while accessing network shares, errors in our administration software due to loss of connection to the database server. I have been doing some Wireshark monitoring on the connection between the VoIP PBX and the rest of the network. Wireshark picks up a clump of retransmitted TCP packets at the times when we record phone restarts. The Wireshark log shows about 2 clusters of retransmissions a day ranging from 5 packets to hundreds. Those in each cluster are mainly between the PBX and some set of the VoIP phones, but not always the same set. Often retransmissions at the same time are to phones connected to the same switch, but sometimes retransmissions occur together to phones at opposite ends of the network. There are usually some coincident retransmissions in passing TCP traffic, for example between client machines and the file servers. The spikes in retransmissions and phone resets do not correlate well with when the network is heavily loaded. They seem to occur slightly more during the day, but most in the evening, when traffic should be decreasing. They occur reasonably often late at night when most computers are turned off and traffic should be lowest. Do you have any ideas that might help diagnose the cause of problems like this? One thing I have not yet tried, but should have, is updating the firmware of all the switches.

    Read the article

  • SATA drives or chipset throwing DRDY ERR and ICRC ABRT

    - by Matt
    I have an SD-VIA-1A2S PCI card with 2 sata ports (and one ATA-133 that isn't used). Two new Western Digital Caviar Green drives (WD10EARS 1TB) throw repeated errors in kern.log (removed date/time/host info for brevity): [ 7.376475] ata2.00: exception Emask 0x12 SAct 0x0 SErr 0x1000500 action 0x6 [ 7.376480] ata2.00: BMDMA stat 0x5 [ 7.376483] ata2: SError: { UnrecovData Proto TrStaTrns } [ 7.376489] ata2.00: cmd c8/00:40:20:00:00/00:00:00:00:00/e0 tag 0 dma 32768 in [ 7.376490] res 51/84:2f:20:00:00/00:00:00:00:00/e0 Emask 0x12 (ATA bus error) [ 7.376493] ata2.00: status: { DRDY ERR } [ 7.376495] ata2.00: error: { ICRC ABRT } [ 7.376504] ata2: hard resetting link I'm using Ubuntu 9.04 - 2.6.28-18-generic, though I have tried live cds of Ubuntu 9.10, Fedora 12 and OpenSUSE 11.2 - all running various 2.6.31 kernels - and all received the same error. Based on testing these drives and this card in two other machines and combos of connecting the drives directly to the motherboard or the add-in card, I'm relatively convinced that it's the VIA chipset that is the problem. Another computer that also has an onboard VIA SATA chipset (like the add-in card) produces the same errors when the drives are directly on that motherboard. I have been able to verify that the drives are perfectly good, and I tried everything I can think of in terms of swapping cables, psu isn't overloaded, etc. The error happens on boot once or twice, after using fdisk on the drive once or twice, and constantly when attempting to sync a new mdadm raid 1 array created on the two drives. Any thoughts on where to go from here - driver/kernel wise? I'm completely open to buying a new PCI add-in card if someone can recommend one with 2 internal sata ports that works well in Debian/Ubuntu. Thanks!

    Read the article

< Previous Page | 51 52 53 54 55 56 57 58 59 60 61 62  | Next Page >