Search Results

Search found 1570 results on 63 pages for 'sockets'.

Page 55/63 | < Previous Page | 51 52 53 54 55 56 57 58 59 60 61 62  | Next Page >

  • Nginx order of servers

    - by scrat
    I have 3 sites on my server. All are running on gunicorn and use unix sockets to communicate with nginx which routes requests. I got three records in nginx.conf like: server { listen 80; server_name site1.com; location / { proxy_pass http://unix:/tmp/site1.sock; proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; } } For site1, site2, site3. If they are ordered as config for site1 goes first, and then goes config for site2 and site3 everything works good. But when I change the order for example to site2, site1, site3, then site1 becomes routed to site2. What am I doing wrong? Full server nginx.conf before servers configs: user www-data; worker_processes 4; pid /var/run/nginx.pid; events { worker_connections 768; # multi_accept on; } http { ## # Basic Settings ## sendfile on; tcp_nopush on; tcp_nodelay on; keepalive_timeout 65; types_hash_max_size 2048; include /etc/nginx/mime.types; default_type application/octet-stream; ## # Logging Settings ## access_log /var/log/nginx/access.log; error_log /var/log/nginx/error.log; ## # Gzip Settings ## gzip on; gzip_types text/css application/x-javascript text/x-component text/richtext image/svg+xml text/plain text/xsd text/xsl text/xml image/x-icon;

    Read the article

  • Adding more drives to a drive array

    - by Mystere Man
    I have a friend who has two servers, a Dell 1800 and an HP 350 ML G5, both have SAS drive arrays. The Dell is a 3.5" and the HP is a 2.5". They currently only have 3 drives in each array. We want to add additional drives, but they do not appear to have caddies, just "fake" covers. I haven't been able to take a good look at them, so I'm not sure what I need to do here. Are the "sockets" just there, and I can buy additional caddies and just stick them in? Or do I have to buy some kind of caddy adapter? Also, i'm thinking of just going 2.5" in the new server, so is there a 2.5" adapter caddy that will fit in the 3.5" chassis for the Dell, so I can use 2.5" drives in the 3.5" chassis? Can I buy 6GB/s drives and add them to the 3GB/s controller? The reason is that we're going to replace both computers in a year or so, and we want to bring the drives with. So rather than buy 3GB/s drives, we just want to buy 6GB/s drives so they can be used in the new server.

    Read the article

  • after building in more ram, bios/debian does nothing [closed]

    - by derty
    My private server has 2x1gb Ram working with a 64bit Debian and an Q6600 Intel. This runs 2 virtual mashines on it each one recives 512mb RAM. Which you can immagine is a bit tight for the hole system. Now i got 2x2gb ram from a friend. I'm not sure if thery are clocking at the same speed, but i'm sure my power adaptor is not on his limit and can handle that. So there are 2 ram sockets left at the mainboard. I shuted down the system and build in the 4 gigs and looked what happen. After pressing the start button, everything gets noisy as known BUT the screen shows nothing, not even the bios stuff it usally does. Why isn't the system booting? I can immagine that it does not direkt link between booting debian and the bios not showing a thing. Or is it Grub? I mounted the system disk, and i can see it, switch folders write stuff with "vim" it does not seems like there is a problem.

    Read the article

  • Can't ssh from CentOS 6.5 to SUSE LINUX 10.1

    - by Pavel Tankov
    We have a quite old installation of SUSE LINUX 10.1 (i586) in the office. The problem shortly: I can successfully ssh to it from machines in the same LAN (192.168.1.0) and not from others (that are in 10.23.0.0). The SuSE has SSH server openssh-4.2p1-18.12. I have ruled out the firewall and hosts.allow and hosts.deny files. When my ssh login attempt fails, here is what the logs say: on the client: $ ssh -vvv 192.168.1.5 OpenSSH_5.3p1, OpenSSL 1.0.1e-fips 11 Feb 2013 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to 192.168.1.5 [192.168.1.5] port 22. debug1: Connection established. debug1: identity file /home/nbuild/.ssh/identity type -1 debug1: identity file /home/nbuild/.ssh/identity-cert type -1 debug1: identity file /home/nbuild/.ssh/id_rsa type -1 debug1: identity file /home/nbuild/.ssh/id_rsa-cert type -1 debug1: identity file /home/nbuild/.ssh/id_dsa type -1 debug1: identity file /home/nbuild/.ssh/id_dsa-cert type -1 on the server: Aug 21 16:34:25 serverhost sshd[20736]: debug3: fd 4 is not O_NONBLOCK Aug 21 16:34:25 serverhost sshd[20736]: debug1: Forked child 20739. Aug 21 16:34:25 serverhost sshd[20736]: debug3: send_rexec_state: entering fd = 7 config len 403 Aug 21 16:34:25 serverhost sshd[20736]: debug3: ssh_msg_send: type 0 Aug 21 16:34:25 serverhost sshd[20736]: debug3: send_rexec_state: done Aug 21 16:34:25 serverhost sshd[20739]: debug1: rexec start in 4 out 4 newsock 4 pipe 6 sock 7 Aug 21 16:34:25 serverhost sshd[20739]: debug1: inetd sockets after dupping: 3, 3 Aug 21 16:34:25 serverhost sshd[20739]: debug3: Normalising mapped IPv4 in IPv6 address Aug 21 16:34:25 serverhost sshd[20739]: Connection from 10.23.1.11 port 44340 The above log on the server is when I enable DEBUG3 log level. However, with the default log level (INFO), the only thing the server logs is this: Aug 21 16:38:32 serverhost sshd[20749]: Did not receive identification string from 10.23.1.11 Any hints? I feel I've tried everything already.

    Read the article

  • What is the typical maximum number of database connections for Oracle running on Windows server ?

    - by Sake
    We are maintaining a database server that serve a large number of clients. Each client typically running serveral client-applications. The total number of connections to the database server (Oracle 9i) is reaching 800 connections on peak load. The windows 2003 server is starting to run out of memory. We are now planning to move to 64bit Windows in order to gain higher memory capability. As a developer I suggest moving to multi-tier architecture with conneciton pooling, which I believe is a natural solution to this problem. However, in order to support my idea, I want the information on: what exactly is the typical number of connections allowed for Oracle database ? What is the problem when the number connections is too high ? Too much memory comsumption ? or too many sockets opened ? or too many context switching between threads ? To be a little bit specific, how could Oracle Forms application scale to thousand of users without facing this problem ? Shall Oracle RAC applied to this case ? I'm sure the answer to this question should depend on quite a number of factors, like the exact spec of the hardware being used. I'm expecting a rough estimation or some experience from the real world.

    Read the article

  • Review: A Quick Look at Reflector

    - by James Michael Hare
    I, like many, was disappointed when I heard that Reflector 7 was not free, and perhaps that’s why I waited so long to try it and just kept using my version 6 (which continues to be free).  But though I resisted for so long, I longed for the better features that were being developed, and began to wonder if I should upgrade.  Thus, I began to look into the features being offered in Reflector 7.5 to see what was new. Multiple Editions Reflector 7.5 comes in three flavors, each building on the features of the previous version: Standard – Contains just the Standalone application ($70) VS – Same as Standard but adds Reflector Object Browser for Visual Studio ($130) VSPro – Same as VS but adds ability to set breakpoints and step into decompiled code ($190) So let’s examine each of these features. The Standalone Application (Standard, VS, VSPro editions) Popping open Reflector 7.5 and looking at the GUI, we see much of the same familiar features, with a few new ones as well: Most notably, the disassembler window now has a tabbed window with navigation buttons.  This makes it much easier to back out of a deep-dive into many layers of decompiled code back to a previous point. Also, there is now an analyzer which can be used to determine dependencies for a given method, property, type, etc. For example, if we select System.Net.Sockets.TcpClient and hit the Analyze button, we’d see a window with the following nodes we could expand: This gives us the ability to see what a given type uses, what uses it, who exposes it, and who instantiates it. Now obviously, for low-level types (like DateTime) this list would be enormous, but this can give a lot of information on how a given type is connected to the larger code ecosystem. One of the other things I like about using Reflector 7.5 is that it does a much better job of displaying iterator blocks than Reflector 6 did. For example, if you were to take a look at the Enumerable.Cast() extension method in System.Linq, and dive into the CastIterator in Reflector 6, you’d see this: But now, in Reflector 7.5, we see the iterator logic much more clearly: This is a big improvement in the quality of their code disassembler and for me was one of the main reasons I decided to take the plunge and get version 7.5. The Reflector Object Browser (VS, VSPro editions) If you have the .NET Reflector VS or VSPro editions, you’ll find you have in Visual Studio a Reflector Object Browser window available where you can select and decompile any assembly right in Visual Studio. For example, if you want to take a peek at how System.Collections.Generic.List<T> works, you can either select List<T> in the Reflector Object Browser, or even simpler just select a usage of it in your code and CTRL + Click to dive in. – And it takes you right to a source window with the decompiled source: Setting Breakpoints and Stepping Into Decompiled Code (VSPro) If you have the VSPro edition, in addition to all the things said above, you also get the additional ability to set breakpoints in this decompiled code and step through it as if it were your own code: This can be a handy feature when you need to see why your code’s use of a BCL or other third-party library isn’t working as you expect. Summary Yes, Reflector is no longer free, and yes, that’s a bit of a bummer. But it always was and still is a very fine tool. If you still have Reflector 6, you aren’t forced to upgrade any longer, but getting the nicer disassembler (especially for iterator blocks) and the handy VS integration is worth at least considering upgrading for.  So I leave it up to you, these are some of the features of Reflector 7.5, what’s your thoughts? Technorati Tags: .NET,Reflector

    Read the article

  • Is there an IDE that can simplify the process of creating a game matchmaking website?

    - by Scott
    Yes, I'm an old guy. And I'm well versed in "C" and have written several games which I have been selling on the web for a number of years. And now, I would like to adapt one of my games to be "online". Sounds simple. I'm sure I can use the thousands of lines of "C" code that I've already written. Right? So my initial investigation begins. First, I think I'll need a server program that lives on a dedicated server (or a VPS probably) that talks to a bunch of client applications that live on individual devices around the world. I can certainly handle that! (I think to myself). I'll break up my existing game into two pieces, a client piece that is just the game displays and buttons, and a server piece that does everything else. Piece of cake, right? But that means that the "server piece" must be executed on a remote machine somewhere and run 24/7. Can I do that? [apparently, that question is so basic, so uneducated, and so lame, that nobody has ever posed it before. Because hours of Googling does not yield an answer. Fine. I'll assume I can do that and move on.] I'll need a "game room", which to me means a website where you log in and then go to a lobby of some kind where you can setup your preferences, see if any of your friends are connected, and create or join games. Should be easy, but it's not. No way. Can I do all this with my local website builder? (which happens to be 90 Second Website Builder, a nice product, btw). It turns out, I can not. I can start with that, but must modify each page, so I can interact with my sql database. So I begin making each page a "PHP" page and dynamically modifying the HTML code with PHP code. I'm already starting to get a headache. Because the resulting web pages looked terrible, I began looking at using JQuery. I want to user a JQuery dialog on my website to display a list of friends and allow the user to select one to invite to the game. [google search for "how to populate a JQuery dialog from a sql database" yields nothing but more confusion.] Javascript? Java? HTML? XML? HTML5? PHP? JQuery? Flash? Sockets? Forms? CSS? Learning about each one of these, and how they interact with each other and/or depend on each other is too much for my feeble old brain. Can anyone simplify this process for me? Is there an IDE that will help me do all this without having to go back to college for a few years? Thanks, Scott

    Read the article

  • SQL 2012 Licensing Thoughts

    - by Geoff N. Hiten
    The only thing more controversial than new Federal Tax plans is new Licensing plans from Microsoft.  In both cases, everyone calculates several numbers.  First, will I pay more or less under this plan?  Second, will my competition pay more or less than now?  Third, will <insert interesting person/company here> pay more or less?  Not that items 2 and 3 are meaningful, that is just how people think. Much like tax plans, the devil is in the details, so lets see how this looks.  Microsoft shows it here: http://www.microsoft.com/sqlserver/en/us/future-editions/sql2012-licensing.aspx First up is a switch from per-socket to per-core licensing.  Anyone who didn’t see something like this coming should rapidly search for a new line of work because you are not paying attention.  The explosion of multi-core processors has made SQL Server a bargain.  Microsoft is in business to make money and the old per-socket model was not going to do that going forward. Per-core licensing also simplifies virtualization licensing.  Physical Core = Virtual Core, at least for licensing.  Oversubscribe your processors, that’s your lookout.  You still pay for  what is exposed to the VM.  The cool part is you can seamlessly move physical and virtual workloads around and the licenses follow.  The catch is you have to have Software Assurance to make the licenses mobile.  Nice touch there. Let’s have a moment of silence for the late, unlamented, largely ignored Workgroup Edition.  To quote the Microsoft  FAQ:  “Standard becomes our sole edition for basic database needs”.  Considering I haven’t encountered a singe instance of SQL Server Workgroup Edition in the wild, I don’t think this will be all that controversial. As for pricing, it looks like a wash with current per-socket pricing based on four core sockets.  Interestingly, that is the minimum core count Microsoft proposes to swap to transition per-socket to per-core if you are on Software Assurance.  Reading the fine print shows that if you are using more, you will get more core licenses: From the licensing FAQ. 15. How do I migrate from processor licenses to core licenses?  What is the migration path? Licenses purchased with Software Assurance (SA) will upgrade to SQL Server 2012 at no additional cost. EA/EAP customers can continue buying processor licenses until your next renewal after June 30, 2012. At that time, processor licenses will be exchanged for core-based licenses sufficient to cover the cores in use by processor-licensed databases (minimum of 4 cores per processor for Standard and Enterprise, and minimum of 8 EE cores per processor for Datacenter). Looks like the folks who invested in the AMD 12-core chips will make out like bandits. Now, on to something new: SQL Server Business Intelligence Edition. Yep, finally a BI-specific SKU licensed for server+CAL configurations only.  Note that Enterprise Edition still supports the complete feature set; the BI Edition is intended for smaller shops who want to use the full BI feature set but without needing Enterprise Edition scale (or costs).  No, you don’t get ColumnStore, Compression, or Partitioning in the BI Edition.  Those are Enterprise scale features, ThankYouVeryMuch.  Then again, your starting licensing costs are about one sixth of an Enterprise Edition system (based on an 8 core server). The only part of the message I am missing is if the current Failover Licensing Policy will change.  Do we need to fully or partially license failover servers?  That is a detail I definitely want to know.

    Read the article

  • The Power to Control Power

    - by speakjava
    I'm currently working on a number of projects using embedded Java on the Raspberry Pi and Beagle Board.  These are nice and small, so don't take up much room on my desk as you can see in this picture. As you can also see I have power and network connections emerging from under my desk.  One of the (admittedly very minor) drawbacks of these systems is that they have no on/off switch.  Instead you insert or remove the power connector (USB for the RasPi, a barrel connector for the Beagle).  For the Beagle Board this can potentially be an issue; with the micro-SD card located right next to the connector it has been known for people to eject the card when trying to power off the board, which can be quite serious for the hardware. The alternative is obviously to leave the boards plugged in and then disconnect the power from the outlet.  Simple enough, but a picture of underneath my desk shows that this is not the ideal situation either. This made me think that it would be great if I could have some way of controlling a mains voltage outlet using a remote switch or, even better, from software via a USB connector.  A search revealed not much that fit my requirements, and anything that was close seemed very expensive.  Obviously the only way to solve this was to build my own.Here's my solution.  I decided my system would support both control mechanisms (remote physical switch and USB computer control) and be modular in its design for optimum flexibility.  I did a bit of searching and found a company in Hong Kong that were offering solid state relays for 99p plus shipping (£2.99, but still made the total price very reasonable).  These would handle up to 380V AC on the output side so more than capable of coping with the UK 240V supply.  The other great thing was that being solid state, the input would work with a range of 3-32V and required a very low current of 7.5mA at 12V.  For the USB control an Arduino board seemed the obvious low-cost and simple choice.  Given the current requirments of the relay, the Arduino would not require the additional power supply and could be powered just from the USB.Having secured the relays I popped down to Homebase for a couple of 13A sockets, RS for a box and an Arduino and Maplin for a toggle switch.  The circuit is pretty straightforward, as shown in the diagram (only one output is shown to make it as simple as possible).  Originally I used a 2 pole toggle switch to select the remote switch or USB control by switching the negative connections of the low voltage side.  Unfortunately, the resistance between the digital pins of the Arduino board was not high enough, so when using one of the remote switches it would turn on both of the outlets.  I changed to a 4 pole switch and isolated both positive and negative connections. IMPORTANT NOTE: If you want to follow my design, please be aware that it requires working with mains voltages.  If you are at all concerned with your ability to do this please consult a qualified electrician to help you.It was a tight fit, especially getting the Arduino in, but in the end it all worked.  The completed box is shown in the photos. The remote switch was pretty simple just requiring the squeezing of two rocker switches and a 9V battery into the small RS supplied box.  I repurposed a standard stereo cable with phono plugs to connect the switch box to the mains outlets.  I chopped off one set of plugs and wired it to the rocker switches.  The photo shows the RasPi and the Beagle board now controllable from the switch box on the desk. I've tested the Arduino side of things and this works fine.  Next I need to write some software to provide an interface for control of the outlets.  I'm thinking a JavaFX GUI would be in keeping with the total overkill style of this project.

    Read the article

  • Best Practices - Core allocation

    - by jsavit
    This post is one of a series of "best practices" notes for Oracle VM Server for SPARC (also called Logical Domains) Introduction SPARC T-series servers currently have up to 4 CPU sockets, each of which has up to 8 or (on SPARC T3) 16 CPU cores, while each CPU core has 8 threads, for a maximum of 512 dispatchable CPUs. The defining feature of Oracle VM Server for SPARC is that each domain is assigned CPU threads or cores for its exclusive use. This avoids the overhead of software-based time-slicing and emulation (or binary rewriting) of system state-changing privileged instructions used in traditional hypervisors. To create a domain, administrators specify either the number of CPU threads or cores that the domain will own, as well as its memory and I/O resources. When CPU resources are assigned at the individual thread level, the logical domains constraint manager attempts to assign threads from the same cores to a domain, and avoid "split core" situations where the same CPU core is used by multiple domains. Sometimes this is unavoidable, especially when domains are allocated and deallocated CPUs in small increments. Why split cores can matter Split core allocations can silenty reduce performance because multiple domains with different address spaces and memory contents are sharing the core's Level 1 cache (L1$). This is called false cache sharing since even identical memory addresses from different domains must point to different locations in RAM. The effect of this is increased contention for the cache, and higher memory latency for each domain using that core. The degree of performance impact can be widely variable. For applications with very small memory working sets, and with I/O bound or low-CPU utilization workloads, it may not matter at all: all machines wait for work at the same speed. If the domains have substantial workloads, or are critical to performance then this can have an important impact: This blog entry was inspired by a customer issue in which one CPU core was split among 3 domains, one of which was the control and service domain. The reported problem was increased I/O latency in guest domains, but the root cause might be higher latency servicing the I/O requests due to the control domain being slowed down. What to do about it Split core situations are easily avoided. In most cases the logical domain constraint manager will avoid it without any administrative action, but it can be entirely prevented by doing one of the several actions: Assign virtual CPUs in multiples of 8 - the number of threads per core. For example: ldm set-vcpu 8 mydomain or ldm add-vcpu 24 mydomain. Each domain will then be allocated on a core boundary. Use the whole core constraint when assigning CPU resources. This allocates CPUs in increments of entire cores instead of virtual CPU threads. The equivalent of the above commands would be ldm set-core 1 mydomain or ldm add-core 3 mydomain. Older syntax does the same thing by adding the -c flag to the add-vcpu, rm-vcpu and set-vcpu commands, but the new syntax is recommended. When whole core allocation is used an attempt to add cores to a domain fails if there aren't enough completely empty cores to satisfy the request. See https://blogs.oracle.com/sharakan/entry/oracle_vm_server_for_sparc4 for an excellent article on this topic by Eric Sharakan. Don't obsess: - if the workloads have minimal CPU requirements and don't need anywhere near a full CPU core, then don't worry about it. If you have low utilization workloads being consolidated from older machines onto a current T-series, then there's no need to worry about this or to assign an entire core to domains that will never use that much capacity. In any case, make sure the most important domains have their own CPU cores, in particular the control domain and any I/O or service domain, and of course any important guests. Summary Split core CPU allocation to domains can potentially have an impact on performance, but the logical domains manager tends to prevent this situation, and it can be completely and simply avoided by allocating virtual CPUs on core boundaries.

    Read the article

  • The Raspberry Pi JavaFX In-Car System (Part 3)

    - by speakjava
    Ras Pi car pt3 Having established communication between a laptop and the ELM327 it's now time to bring in the Raspberry Pi. One of the nice things about the Raspberry Pi is the simplicity of it's power supply.  All we need is 5V at about 700mA, which in a car is as simple as using a USB cigarette lighter adapter (which is handily rated at 1A).  My car has two cigarette lighter sockets (despite being specified with the non-smoking package and therefore no actual cigarette lighter): one in the centre console and one in the rear load area.  This was convenient as my idea is to mount the Raspberry Pi in the back to minimise the disruption to the very clean design of the Audi interior. The first task was to get the Raspberry Pi to communicate using Wi-Fi with the ELM 327.  Initially I tried a cheap Wi-Fi dongle from Amazon, but I could not get this working with my home Wi-Fi network since it just would not handle the WPA security no matter what I did.  I upgraded to a Wi Pi from Farnell and this works very well. The ELM327 uses Ad-Hoc networking, which is point to point communication.  Rather than using a wireless router each connecting device has its own assigned IP address (which needs to be on the same subnet) and uses the same ESSID.  The settings of the ELM327 are fixed to an IP address of 192.168.0.10 and useing the ESSID, "Wifi327".  To configure Raspbian Linux to use these settings we need to modify the /etc/network/interfaces file.  After some searching of the web and a few false starts here's the settings I came up with: auto lo eth0 wlan0 iface lo inet loopback iface eth0 inet static     address 10.0.0.13     gateway 10.0.0.254     netmask 255.255.255.0 iface wlan0 inet static     address 192.168.0.1     netmask 255.255.255.0     wireless-essid Wifi327     wireless-mode ad-ho0 After rebooting, iwconfig wlan0 reported that the Wi-Fi settings were correct.  However, ifconfig showed no assigned IP address.  If I configured the IP address manually using ifconfig wlan0 192.168.0.1 netmask 255.255.255.0 then everything was fine and I was able to happily ping the IP address of the ELM327.  I tried numerous variations on the interfaces file, but nothing I did would get me an IP address on wlan0 when the machine booted.  Eventually I decided that this was a pointless thing to spend more time on and so I put a script in /etc/init.d and registered it with update-rc.d.  All the script does (currently) is execute the ifconfig line and now, having installed the telnet package I am able to telnet to the ELM327 via the Raspberry Pi.  Not nice, but it works. Here's a picture of the Raspberry Pi in the car for testing In the next part we'll look at running the Java code on the Raspberry Pi to collect data from the car systems.

    Read the article

  • Process for Securing Web Sites and Applications

    - by Aamir Hasan
    The following quick-start guide provides a detailed overview of how to configure security for IIS 6.0. Reduce the Attack Surface of the Web Server 1.       Enable only essential Windows Server 2003 components and services. 2.       Enable only essential IIS 6.0 components and services. 3.       Enable only essential Web service extensions. 4.       Enable only essential Multipurpose Internet Mail Extensions (MIME) types. 5.       Configure Windows Server 2003 security settings. Prevent Unauthorized Access to Web Sites and Applications 1.       Store content on a dedicated disk volume. 2.       Set IIS Web site permissions. 3.       Set IP address and domain name restrictions. 4.       Set the NTFS file system permissions. Isolate Web Sites and Applications 1.       Evaluate the effects of impersonation on application compatibility: 2·         Identify the impersonation behavior for ASP applications. 3·         Select the impersonation behavior for ASP.NET applications. 4.       Configure Web sites and applications for isolation. Configure User Authentication 1.       Configure Web site authentication. 2·         Select the Web site authentication method. 3·         Configure the Web site authentication method. 4.       Configure File Transfer Protocol (FTP) site authentication. Encrypt Confidential Data Exchanged with Clients 1.       Use Secure Sockets Layer (SSL) to encrypt confidential data. 2.       Use Internet Protocol security (IPSec) or virtual private network (VPN) with remote administration. Maintain Web Site and Application Security 1.       Obtain and apply current security patches. 2.       Enable Windows Server 2003 security logs. 3.       Enable file access auditing for Web site content. 4.       Configure IIS logs. 5.       Review security policies, processes, and procedures.  Note:To secure the Web sites and applications in a Web farm, use the process described in this chapter to configure security for each server in the Web farm. Link:http://www.studentacad.com/post/2010/04/28/Process-for-Securing-Web-Sites-and-Applications.aspx

    Read the article

  • AppFabric Cache - An existing connection was forcibly closed by the remote host

    - by Wallace Breza
    I'm trying to get AppFabric cache up and running on my local development environment. I have Windows Server AppFabric Beta 2 Refresh installed, and the cache cluster and host configured and started running on Windows 7 64-bit. I'm running my MVC2 website in a local IIS website under a v4.0 app pool in integrated mode. HostName : CachePort Service Name Service Status Version Info -------------------- ------------ -------------- ------------ SN-3TQHQL1:22233 AppFabricCachingService UP 1 [1,1][1,1] I have my web.config configured with the following: <configSections> <section name="dataCacheClient" type="Microsoft.ApplicationServer.Caching.DataCacheClientSection, Microsoft.ApplicationServer.Caching.Core, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" allowLocation="true" allowDefinition="Everywhere"/> </configSections> <dataCacheClient> <hosts> <host name="SN-3TQHQL1" cachePort="22233" /> </hosts> </dataCacheClient> I'm getting an error when I attempt to initialize the DataCacheFactory: protected CacheService() { _cacheFactory = new DataCacheFactory(); <-- Error here _defaultCache = _cacheFactory.GetDefaultCache(); } I'm getting the ASP.NET yellow error screen with the following: An existing connection was forcibly closed by the remote host Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host Source Error: Line 21: protected CacheService() Line 22: { Line 23: _cacheFactory = new DataCacheFactory(); Line 24: _defaultCache = _cacheFactory.GetDefaultCache(); Line 25: }

    Read the article

  • Socket error 10052 on UDP socket

    - by Jesper
    We have a .NET 2.0 desktop application which sends and receives network packets over UDP. Several users have reported an occasional socket error 10052 which happens when the code calls socket.BeginReceiveFrom on a the UDP socket. What does this mean? The official MS documentation for socket error 10052 says - quote: "WSAENETRESET (10052) Network dropped connection on reset . The connection has been broken due to keep-alive activity detecting a failure while the operation was in progress. It can also be returned by setsockopt if an attempt is made to set SO_KEEPALIVE on a connection that has already failed." This just doesn't make much sense for a UDP socket since UDP is a connectionless protocol. I know that another close error code 10054 in connection with UDP sockets means that an ICMP message "Port Unreachable" was received, and I am wondering if 10052 might map to another ICMP message? I have googled this for months, read network books, etc. but can't find anything. Please help - what does socket error 10052 on a UDP socket mean? Thanks in advance

    Read the article

  • Using .NET's HttpWebRequest to download a multitude of files in a row

    - by Cornelius
    I have an application that needs to download several files in a row in succession (sometimes a few thousand). However, what ends up happening when several files need to be downloaded is I get an exception with an inner exception of type SocketException and the error code 10048 (WSAEADDRINUSE). I did some digging and basically it's because the server has run out of sockets (and they are all waiting for 240s or so before they become available again) - not coincidentally it starts happening around the 1024 file range. I would expect that the HttpWebRequest/ServicePointManager would be reusing my connection, but apparently it is not (and the files are https, so that may be part of it). I never saw this problem in the C++ code that this was ported from (but that doesn't mean it didn't ever happen - I'd be surprised if it was, though). I am properly closing the WebRequest object and the HttpWebRequest object has KeepAlive set to true by default. Next my intent is to fiddle around with ServicePointManager.SetTcpKeepAlive(). However, I can't see how more people haven't run into this problem. Has anyone else run into the problem, and if so, what did you do to get around it? Currently I have a retry scheme that detects this error and waits it out, but that doesn't seem like the right thing to do. Here's some basic code to verify what I'm doing (just in case I'm missing closing something): WebRequest webRequest = WebRequest.Create(uri); webRequest.Method = "GET"; webRequest.Credentials = new NetworkCredential(username, password); WebResponse webResponse = webRequest.GetResponse(); try { using(Stream stream = webResponse.GetResponseStream()) { // read the stream } } finally { webResponse.Close() }

    Read the article

  • Using SSL and SslStream for peer to peer authentication?

    - by Scott Whitlock
    I need to provide secure communication between various processes that are using TCP/IP sockets for communication. I want both authentication and encryption. Rather than re-invent the wheel I would really like to use SSL and the SslStream class and self-signed certificates. What I want to do is validate the remote process's certificate against a known copy in my local application. (There doesn't need to be a certificate authority because I intend for the certificates to be copied around manually). To do this, I want the application to be able to automatically generate a new certifiate the first time it is run. In addition to makecert.exe, it looks like this link shows a way to automatically generate self-signed certificates, so that's a start. I've looked at the AuthenticateAsServer and AuthenticateAsClient methods of SslStream. You can provide call-backs for verification, so it looks like it's possible. But now that I'm into the details of it, I really don't think it's possible to do this. Am I going in the right direction? Is there a better alternative? Has anyone done anything like this before (basically peer-to-peer SSL rather than client-server)?

    Read the article

  • Gmail: How to send an email programmatically

    - by Clint
    Possible Exact Duplicate: Sending Email in C#.NET Through Gmail Hi, I'm trying to send an email using gmail: I tried various examples that I found on this site and other sites but I always get the same error: Unable to connect to the remote server -- System.net.Sockets.SocketException: No connection could be made because the target actively refused it 209.85.147.109:587 public static void Attempt1() { var client = new SmtpClient("smtp.gmail.com", 587) { Credentials = new NetworkCredential("[email protected]", "MyPassWord"), EnableSsl = true }; client.Send("[email protected]", "[email protected]", "test", "testbody"); } Any ideas? UPDATE More details. Maybe I should say what other attempts I made that gave me the same error: (Note when i didn't specify a port it tryed port 25) public static void Attempt2() { var fromAddress = new MailAddress("[email protected]", "From Name"); var toAddress = new MailAddress("[email protected]", "To Name"); const string fromPassword = "pass"; const string subject = "Subject"; const string body = "Body"; var smtp = new SmtpClient { Host = "smtp.gmail.com", Port = 587, EnableSsl = true, DeliveryMethod = SmtpDeliveryMethod.Network, UseDefaultCredentials = false, Credentials = new NetworkCredential(fromAddress.Address, fromPassword) }; using (var message = new MailMessage(fromAddress, toAddress) { Subject = subject, Body = body } ) { smtp.Send(message); } } public static void Attempt3() { MailMessage mail = new MailMessage(); mail.To.Add("[email protected]"); mail.From = new MailAddress("[email protected]"); mail.Subject = "Email using Gmail"; string Body = "Hi, this mail is to test sending mail" + "using Gmail in ASP.NET"; mail.Body = Body; mail.IsBodyHtml = true; SmtpClient smtp = new SmtpClient(); smtp.Host = "smtp.gmail.com"; smtp.Credentials = new System.Net.NetworkCredential ("[email protected]", "pass"); smtp.EnableSsl = true; smtp.Send(mail); }

    Read the article

  • NSMutableURLRequest wont try to use 3G when 3G is not 'connected' in Reachability enumeration

    - by Kyle
    I won't bother posting any code because my code works fine when I launch Safari or something that turns on the 3G connection first. When I put it Airport mode, then put back OFF, I will get the behavior of a connection error saying No internet connection with NSMutableURLRequest. I've personally mailed apple about how the Ant gets turned on and off, and they said anything that uses their base CFSocketStream object will turn on the Ant, and I quote: "such as NSURLRequest".. BSD Sockets do not, just so everyone knows.. However, I assumed NSMutableURLRequest would fall into the category of 'Does', but it seems like it doesnt. It never succeeds for me when I cycle Airport or have the phone idle for a long time. It will ALWAYS succeed when I open any other network app first to turn the Ant on. Shall I be forced to do a dummy NSURLRequest call to turn this on; or has anyone been able to get this class working just fine? Remember this is just an implementation of NSMutableURLRequest to upload a file Async, and no other Network operations are performed anywhere; no ads, no version checks, no nothing.

    Read the article

  • How to get PHP command line to work with PDO?

    - by Sabya
    I want to work with PDO, through PHP command line. It works perfect through the PHP web API, but not through the command line. But when I execute the command: php test.php, it says unknown class PDO. I think it has something to do with the thread-safety difference. Because, when I execute the above command, the following warnings come: - F:\shema\htdocs>php test.php PHP Warning: PHP Startup: soap: Unable to initialize module Module compiled with module API=20060613, debug=0, thread-safety=0 PHP compiled with module API=20060613, debug=0, thread-safety=1 These options need to match in Unknown on line 0 PHP Warning: PHP Startup: sockets: Unable to initialize module Module compiled with module API=20060613, debug=0, thread-safety=0 PHP compiled with module API=20060613, debug=0, thread-safety=1 These options need to match in Unknown on line 0 PHP Warning: PHP Startup: mysql: Unable to initialize module Module compiled with module API=20060613, debug=0, thread-safety=0 PHP compiled with module API=20060613, debug=0, thread-safety=1 These options need to match in Unknown on line 0 PHP Warning: PHP Startup: pdo_mysql: Unable to initialize module Module compiled with module API=20060613, debug=0, thread-safety=0 PHP compiled with module API=20060613, debug=0, thread-safety=1 These options need to match in Unknown on line 0 PHP Warning: PHP Startup: pdo_pgsql: Unable to initialize module Module compiled with module API=20060613, debug=0, thread-safety=0 PHP compiled with module API=20060613, debug=0, thread-safety=1 These options need to match in Unknown on line 0 PHP Fatal error: Class 'PDO' not found in F:\shema\htdocs\test.php on line 2 PHP version: 5.2.9-2, downloaded from here. OS: Windows Vista If the problem is with the modules, where do I get the thread safe modules for those modules?

    Read the article

  • Why does the the Java VM not recover after "Too many open files" errors?

    - by Michael
    In certain well-understood circumstances, our application will open too many sockets (database connections) and reach the maximum open files that the OS allows. We understand this; we are fixing the issue and also bumping up the limit. What we can't explain is why parts of our application don't recover even after the number of connections abates and we're well within the limit. In this case, it's an application running under Tomcat. When this happens, we first start seeing "Too many open files" errors: SEVERE: Socket accept failed java.net.SocketException: Too many open files at java.net.PlainSocketImpl.socketAccept(Native Method) at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:390) at java.net.ServerSocket.implAccept(ServerSocket.java:453) at java.net.ServerSocket.accept(ServerSocket.java:421) at org.apache.tomcat.util.net.DefaultServerSocketFactory.acceptSocket(DefaultServerSocketFactory.java:61) at org.apache.tomcat.util.net.JIoEndpoint$Acceptor.run(JIoEndpoint.java:310) at java.lang.Thread.run(Thread.java:619) Eventually, we start seeing NoClassDefFoundErrors inside an application thread that's trying to open HTTP connections: java.lang.NoClassDefFoundError: org/apache/commons/httpclient/protocol/ControllerThreadSocketFactory at org.apache.commons.httpclient.protocol.DefaultProtocolSocketFactory.createSocket(DefaultProtocolSocketFactory.java:128) at org.apache.commons.httpclient.HttpConnection.open(HttpConnection.java:707) at org.apache.commons.httpclient.MultiThreadedHttpConnectionManager$HttpConnectionAdapter.open(MultiThreadedHttpConnectionManager.java:1349) [...] Caused by: java.lang.ClassNotFoundException: org.apache.commons.httpclient.protocol.ControllerThreadSocketFactory at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1387) at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1233) at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320) ... 8 more When the errant connections go away, the server starts accepting connections again, and everything seems ok, but we're left with the latter error constantly being spewed to stderr. Although the application typically logs unloaded classes to stdout, I don't see any such logs just before, during or after the "Too many open files" errors. My initial theory was that the Hotspot JVM would unload seemingly unused classes when it encounters "Too many open files," but if so, it doesn't log the fact. I'd also expect it to recover if that were the case. Platform details: Java(TM) SE Runtime Environment (build 1.6.0_14-b08) Java HotSpot(TM) 64-Bit Server VM (build 14.0-b16, mixed mode) Apache Tomcat Version 6.0.18

    Read the article

  • Best method of achieving bi-directional communication between Apple iPad "clients" and a Windows Ser

    - by user361910
    We are currently starting to build a client-server system which will see 10 or more Apple iPad client devices communicating to a central Windows server over a wireless LAN. We wanted to some existing plumbing (.NET remoting/WCF/web services/etc) that would allow us to implement a reliable, secure solution without having to start at a low level (e.g. sockets) and recreate the wheel. One of the major requirements that complicates this scenario is that unlike a traditional web service, the windows server needs to be able to arbitrarily notify the clients whenever certain events occur -- so it is not a simple request/response scenario like the web. Initially, we were going to use Windows clients, so our plan was to use the full-duplex mode of .NET WCF over HTTP|TCP. But now using the iPad, we don't have any of the WCF infrastructure. So my question is: what is the best way to allow an iPad and a Windows server to (securely) communicate over a LAN, with each device able to initiate communication to the other? Am I stuck writing low-level socket code? Thanks!

    Read the article

  • Use UdpClient with IPv4 and IPv6?

    - by mazzzzz
    A little while ago I created a class to deal with my LAN networking programs. I recently upgraded one of my laptops to windows 7 and relized that windows 7 (or at least the way I have it set up) only supports IPv6, but my desktop is still back in the Windows xp days, and only uses IPv4. The class I created uses the UdpClient class, and is currently setup to only work with IPv4.. Is there a way to modify my code to allow sending and receiving of IPv6 and IPv4 packets?? It would be hard to scrap the classes code, a lot of my programs rely on this class. I would like to keep the class as close to its original state, so I don't need to modify my older programs, only switch out the old class for the updated one. Thanks for any and all help, Max Send: using System.Net.Sockets;UdpClient tub = new UdpClient (); tub.Connect ( new IPEndPoint ( ToIP, ToPort ) ); UdpState s = new UdpState (); s.client = tub; s.endpoint = new IPEndPoint ( ToIP, ToPort ); tub.BeginSend ( data, data.Length, new AsyncCallback ( SendCallBack ),s); private void SendCallBack ( IAsyncResult result ) { UdpClient client = (UdpClient)( (UdpState)( result.AsyncState ) ).client; IPEndPoint endpoint = (IPEndPoint)( (UdpState)( result.AsyncState ) ).endpoint; client.EndSend ( result ); } Receive: UdpClient tub = new UdpClient (ReceivePort); UdpState s = new UdpState (); s.client = tub; s.endpoint = new IPEndPoint ( ReceiveIP, ReceivePort ); s.callback = cb; tub.BeginReceive ( new AsyncCallback ( receivedPacket ), s ); public void receivedPacket (IAsyncResult result) { UdpClient client = (UdpClient)( (UdpState)( result.AsyncState ) ).client; IPEndPoint endpoint = (IPEndPoint)( (UdpState)( result.AsyncState ) ).endpoint; Byte[] receiveBytes = client.EndReceive ( result, ref endpoint ); ReceivedPacket = new Packet ( receiveBytes ); client.Close(); //Do what ever with the packets now }

    Read the article

  • cannot receive UDP broadcast packets

    - by user292792
    Hello I have 2 boxes: - an embedded device (ARM Omap with linux) which I'll call "Omap". - a PC (can either be Windows or linux). Scenario 1 Both boxes are in the same network (example: my office). The Omap gets its address from a DHCP server (ex: 192.168.10.110). The PC has always the same address (ex. 192.168.10.104). I can successfully exchange UDP broadcast packets on any port. Success. Scenario 2 The 2 boxes are in a network withOUT a DHCP server. The PC has a static IP address (example: 10.10.10.20). The Omap boots, looks for a DHCP server, doesn't find it, and is in what I call "bad IP address" state. Now... Broadcasting UDP packets from the Omap works: the PC can see them. The opposite doesn't work: UDP packets broadcasted by the PC are not seen by the Omap. I am using Wireshark on another PC to verify that the packets are being sent. Failure. I tried to change the Omap ip address (with ifconfig)... no luck. What am I missing? To complete the picture, when the Omap is in Scenario 2, if I run udhcpc ... it can communicate with the DHCP server and get an IP address. I also see the packets with Wireshark. So this means that the DHCP client is able to broadcast UDP packets. (Yes, I tried to use DHCP ports 67/68 but it doesn't work). I am using Boost C++ Asio UDP sockets. Specifically, I took the multicast examples and changed them to do broadcasting. Any help is appreciated. Thanks, Benedetto

    Read the article

  • When using SendKeys()-InvalidOperationException: Undo Operation encountered...

    - by M0DC0M
    Here is my code public void KeyPress() { //Finds the target window and sends a key command to the application Process[] processes = Process.GetProcessesByName("calc"); IntPtr calculatorHandle; foreach (Process proc in processes) { calculatorHandle = proc.MainWindowHandle; if (calculatorHandle == IntPtr.Zero) { MessageBox.Show("Calculator is not running."); return; } SetForegroundWindow(calculatorHandle); break; } SendKeys.SendWait("1"); } After Executing this code I recieve an Error, i know the source is the SendKeys. Here is the full error I am Receiving System.InvalidOperationException was unhandled Message="The Undo operation encountered a context that is different from what was applied in the corresponding Set operation. The possible cause is that a context was Set on the thread and not reverted(undone)." Source="mscorlib" StackTrace: at System.Threading.SynchronizationContextSwitcher.Undo() at System.Threading.ExecutionContextSwitcher.Undo() at System.Threading.ExecutionContext.runFinallyCode(Object userData, Boolean exceptionThrown) at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteBackoutCodeHelper(Object backoutCode, Object userData, Boolean exceptionThrown) at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Net.ContextAwareResult.Complete(IntPtr userToken) at System.Net.LazyAsyncResult.ProtectedInvokeCallback(Object result, IntPtr userToken) at System.Net.Sockets.BaseOverlappedAsyncResult.CompletionPortCallback(UInt32 errorCode, UInt32 numBytes, NativeOverlapped* nativeOverlapped) at System.Threading._IOCompletionCallback.PerformIOCompletionCallback(UInt32 errorCode, UInt32 numBytes, NativeOverlapped* pOVERLAP) InnerException: I'm not sure what the problem is, The number will appear in my calculator but that error pops up

    Read the article

  • According to MSDN ReadFile() Win32 function may incorrectly report read operation completion. When?

    - by Martin Dobšík
    The MSDN states in its description of ReadFile() function (http://msdn.microsoft.com/en-us/library/aa365467%28VS.85%29.aspx): “If hFile is opened with FILE_FLAG_OVERLAPPED, the lpOverlapped parameter must point to a valid and unique OVERLAPPED structure, otherwise the function can incorrectly report that the read operation is complete.” I have some applications that are violating the above recommendation and I would like to know the severity of the problem. I mean the program uses named pipe that has been created with FILE_FLAG_OVERLAPPED, but it reads from it using the following call: ReadFile(handle, &buf, n, &n_read, NULL); That means it passes NULL as the lpOverlapped parameter. That call should not work correctly in some circumstances according to documentation. I have spent a lot of time trying to reproduce the problem, but I was unable to! I always got all data in right place at right time. I was testing only Named Pipes though. Would anybody know when can I expect that ReadFile() will incorrectly return and report successful completion even the data are not yet in the buffer? What would have to happen in order to reproduce the problem? Does it happen with files, pipes, sockets, consoles, or other devices? Do I have to use particular version of OS? Or particular version of reading (like register the handle to I/O completion port)? Or particular synchronization of reading and writing processes/threads? Or when would that fail? It works for me :/ Please help! With regards Martin

    Read the article

< Previous Page | 51 52 53 54 55 56 57 58 59 60 61 62  | Next Page >