Search Results

Search found 14435 results on 578 pages for 'disk usage'.

Page 550/578 | < Previous Page | 546 547 548 549 550 551 552 553 554 555 556 557  | Next Page >

• Oracle Schema Design: Seperate Schema with I/O Overhead?

  - by Guru

  We are designing database schema for a new system based on Oracle 11gR1. We have identified a main schema which would have close to 100 tables, these will be accessed from the front end Java application. We have a requirement to audit the values which got changed in close to 50 tables, this has to be done every row. Which means, it is possible that, for a single row in MYSYS.T1 there might be 50 (or more) rows in MYSYS_AUDIT.T1_AUD table. We might be having old values of every column entry and new values available from T1. DBA gave an observation, advising against this method, because he said, separate schema meant an extra I/O for every operation. Basically AUDIT schema would be used only to do some analyse and enter values (thus SELECT and INSERT). Is it true that, "a separate schema means an extra I/O" ? I could not find justification. It appears logical to me, as the AUDIT data should not be tampered with, so a separate schema. Also, we designed a separate schema for archiving some tables from MYSYS. From MYSYS_ARC the table might be backed up into tapes or deleted after sufficient time. Few stats: Few tables (close to 20, 30) in MYSYS schema could grow to around 50M rows. We have asked for a total disk space of 4 TB. MYSYS_AUDIT schema might be having 10 times that of MYSYS but we wont keep them more than 3 months. Questions Given all these, can you suggest me any improvements? Separate schema affects disc I/O? (one extra I/O for every schema ?) Any general suggestions? Figure: +-------------------+ +-------------------+ | MYSYS | | MYSYS_AUDIT | | | | | | 1. T1 | | 1. T1_AUD | | 2. T2 | | 2. T2_AUD | | 3. T3 |--------->| 3. T3_AUD | | 4. T4 |(SELECT, | 4. T4_AUD | | . | INSERT) | . | | . | | . | | . | | . | | 100. T100 | | 50. T50_AUD | +-------------------+ +-------------------+ | | | | |(INSERT) | | | * +-------------------+ | MYSYS_ARC | | | | 1. T1_ARC | | 2. T2_ARC | | 3. T3_ARC | | 4. T4_ARC | | . | | . | | . | | 100. T100_ARC | +-------------------+ Apart from this, we have two more schemas with only read only rights, but mainly they are for adhoc purpose and we dont mind the performance on them.

  Read the article

• How to optimize my PostgreSQL DB for prefix search?

  - by asmaier

  I have a table called "nodes" with roughly 1.7 million rows in my PostgreSQL db =#\d nodes Table "public.nodes" Column | Type | Modifiers --------+------------------------+----------- id | integer | not null title | character varying(256) | score | double precision | Indexes: "nodes_pkey" PRIMARY KEY, btree (id) I want to use information from that table for autocompletion of a search field, showing the user a list of the ten titles having the highest score fitting to his input. So I used this query (here searching for all titles starting with "s") =# explain analyze select title,score from nodes where title ilike 's%' order by score desc; QUERY PLAN ----------------------------------------------------------------------------------------------------------------------- Sort (cost=64177.92..64581.38 rows=161385 width=25) (actual time=4930.334..5047.321 rows=161264 loops=1) Sort Key: score Sort Method: external merge Disk: 5712kB -> Seq Scan on nodes (cost=0.00..46630.50 rows=161385 width=25) (actual time=0.611..4464.413 rows=161264 loops=1) Filter: ((title)::text ~~* 's%'::text) Total runtime: 5260.791 ms (6 rows) This was much to slow for using it with autocomplete. With some information from Using PostgreSQL in Web 2.0 Applications I was able to improve that with a special index =# create index title_idx on nodes using btree(lower(title) text_pattern_ops); =# explain analyze select title,score from nodes where lower(title) like lower('s%') order by score desc limit 10; QUERY PLAN ------------------------------------------------------------------------------------------------------------------------------------------ Limit (cost=18122.41..18122.43 rows=10 width=25) (actual time=1324.703..1324.708 rows=10 loops=1) -> Sort (cost=18122.41..18144.60 rows=8876 width=25) (actual time=1324.700..1324.702 rows=10 loops=1) Sort Key: score Sort Method: top-N heapsort Memory: 17kB -> Bitmap Heap Scan on nodes (cost=243.53..17930.60 rows=8876 width=25) (actual time=96.124..1227.203 rows=161264 loops=1) Filter: (lower((title)::text) ~~ 's%'::text) -> Bitmap Index Scan on title_idx (cost=0.00..241.31 rows=8876 width=0) (actual time=90.059..90.059 rows=161264 loops=1) Index Cond: ((lower((title)::text) ~>=~ 's'::text) AND (lower((title)::text) ~<~ 't'::text)) Total runtime: 1325.085 ms (9 rows) So this gave me a speedup of factor 4. But can this be further improved? What if I want to use '%s%' instead of 's%'? Do I have any chance of getting a decent performance with PostgreSQL in that case, too? Or should I better try a different solution (Lucene?, Sphinx?) for implementing my autocomplete feature?

  Read the article

• "Row not found or changed" Problem

  - by winston schröder

  Hi there, I'm working on a SQL CE Database and get into the "Row nor found or changed" exception. The exception only occurs when I try to update. On the first Run after the insert it shows up a MemberChangeConflict which says, that my Column Created_at has in all three values (current, original, database) the same. But in a second attempt it doesn't appear anymore. The DataContext is instanciated on Startup and freed on Exit of my Local(!) Application. I use a sqlmetal generated mapping and code file. In the map I added some Associations and set the timemstamp columns UpdateCheck property to Always while all other have the setting never. The Timestamp Column is marked as isVersion="true", the Id Column as Primary Key. Since I don't dispose the datacontext I expected to be using implicit transaction. When I run the SubmitChanges Method within a TransactionScope. Can anyone tell me how I can update the timestamp within the code ? I know about the Problems one has to deal with if you dispose the datacontext. So I decided not to do this since I use a Single User Local DB Cache File. (I did already use a version where I disposed the datacontext after every usage, but this version had a real bad performance and error rate, so I decided to choose the other variant.) LibDB.Client.Vehicles tmp = null; try { tmp = e.Parameter as LibDB.Client.Vehicles; if (tmp == null) return; if (!this._dc.Vehicles.Contains(tmp)) { this._dc.Vehicles.Attach(tmp); } this.ShowChangesReport(this._dc.GetChangeSet()); using (TransactionScope ts = new TransactionScope()) { try { this._dc.SubmitChanges(); ts.Complete(); } catch (ChangeConflictException cce) { Console.WriteLine("Optimistic concurrency error."); Console.WriteLine(cce.Message); Console.ReadLine(); foreach (ObjectChangeConflict occ in this._dc.ChangeConflicts) { MetaTable metatable = this._dc.Mapping.GetTable(occ.Object.GetType()); LibDB.Client.Vehicles entityInConflict = (LibDB.Client.Vehicles)occ.Object; Console.WriteLine("Table name: {0}", metatable.TableName); Console.Write("Vin: "); Console.WriteLine(entityInConflict.Vin); foreach (MemberChangeConflict mcc in occ.MemberConflicts) { object currVal = mcc.CurrentValue; object origVal = mcc.OriginalValue; object databaseVal = mcc.DatabaseValue; MemberInfo mi = mcc.Member; Console.WriteLine("Member: {0}", mi.Name); Console.WriteLine("current value: {0}", currVal); Console.WriteLine("original value: {0}", origVal); Console.WriteLine("database value: {0}", databaseVal); } throw cce; } } catch (Exception ex) { this.ShowChangeConflicts(this._dc.ChangeConflicts); Console.WriteLine(ex.Message); } } this.ShowChangesReport(this._dc.GetChangeSet());

  Read the article

• Any tool(s) for knowing the layout (segments) of running process in Windows?

  - by claws

  I've always been curious about How exactly the process looks in memory? What are the different segments(parts) in it? How exactly will be the program (on the disk) & process (in the memory) are related? My previous question: http://stackoverflow.com/questions/1966920/more-info-on-memory-layout-of-an-executable-program-process In my quest, I finally found a answer. I found this excellent article that cleared most of my queries: http://www.linuxforums.org/articles/understanding-elf-using-readelf-and-objdump_125.html In the above article, author shows how to get different segments of the process (LINUX) & he compares it with its corresponding ELF file. I'm quoting this section here: Courious to see the real layout of process segment? We can use /proc//maps file to reveal it. is the PID of the process we want to observe. Before we move on, we have a small problem here. Our test program runs so fast that it ends before we can even dump the related /proc entry. I use gdb to solve this. You can use another trick such as inserting sleep() before it calls return(). In a console (or a terminal emulator such as xterm) do: $ gdb test (gdb) b main Breakpoint 1 at 0x8048376 (gdb) r Breakpoint 1, 0x08048376 in main () Hold right here, open another console and find out the PID of program "test". If you want the quick way, type: $ cat /proc/`pgrep test`/maps You will see an output like below (you might get different output): [1] 0039d000-003b2000 r-xp 00000000 16:41 1080084 /lib/ld-2.3.3.so [2] 003b2000-003b3000 r--p 00014000 16:41 1080084 /lib/ld-2.3.3.so [3] 003b3000-003b4000 rw-p 00015000 16:41 1080084 /lib/ld-2.3.3.so [4] 003b6000-004cb000 r-xp 00000000 16:41 1080085 /lib/tls/libc-2.3.3.so [5] 004cb000-004cd000 r--p 00115000 16:41 1080085 /lib/tls/libc-2.3.3.so [6] 004cd000-004cf000 rw-p 00117000 16:41 1080085 /lib/tls/libc-2.3.3.so [7] 004cf000-004d1000 rw-p 004cf000 00:00 0 [8] 08048000-08049000 r-xp 00000000 16:06 66970 /tmp/test [9] 08049000-0804a000 rw-p 00000000 16:06 66970 /tmp/test [10] b7fec000-b7fed000 rw-p b7fec000 00:00 0 [11] bffeb000-c0000000 rw-p bffeb000 00:00 0 [12] ffffe000-fffff000 ---p 00000000 00:00 0 Note: I add number on each line as reference. Back to gdb, type: (gdb) q So, in total, we see 12 segment (also known as Virtual Memory Area--VMA). But I want to know about Windows Process & PE file format. Any tool(s) for getting the layout (segments) of running process in Windows? Any other good resources for learning more on this subject? EDIT: Are there any good articles which shows the mapping between PE file sections & VA segments?

  Read the article

• Recursive N-way merge/diff algorithm for directory trees?

  - by BobMcGee

  What algorithms or Java libraries are available to do N-way, recursive diff/merge of directories? I need to be able to generate a list of folder trees that have many identical files, and have subdirectories with many similar files. I want to be able to use 2-way merge operations to quickly remove as much redundancy as possible. Goals: Find pairs of directories that have many similar files between them. Generate short list of directory pairs that can be synchronized with 2-way merge to eliminate duplicates Should operate recursively (there may be nested duplicates of higher-level directories) Run time and storage should be O(n log n) in numbers of directories and files Should be able to use an embedded DB or page to disk for processing more files than fit in memory (100,000+). Optional: generate an ancestry and change-set between folders Optional: sort the merge operations by how many duplicates they can elliminate I know how to use hashes to find duplicate files in roughly O(n) space, but I'm at a loss for how to go from this to finding partially overlapping sets between folders and their children. EDIT: some clarification The tricky part is the difference between "exact same" contents (otherwise hashing file hashes would work) and "similar" (which will not). Basically, I want to feed this algorithm at a set of directories and have it return a set of 2-way merge operations I can perform in order to reduce duplicates as much as possible with as few conflicts possible. It's effectively constructing an ancestry tree showing which folders are derived from each other. The end goal is to let me incorporate a bunch of different folders into one common tree. For example, I may have a folder holding programming projects, and then copy some of its contents to another computer to work on it. Then I might back up and intermediate version to flash drive. Except I may have 8 or 10 different versions, with slightly different organizational structures or folder names. I need to be able to merge them one step at a time, so I can chose how to incorporate changes at each step of the way. This is actually more or less what I intend to do with my utility (bring together a bunch of scattered backups from different points in time). I figure if I can do it right I may as well release it as a small open source util. I think the same tricks might be useful for comparing XML trees though.

  Read the article

• Why is cell phone software still so primitive?

  - by Tomislav Nakic-Alfirevic

  I don't do mobile development, but it strikes me as odd that features like this aren't available by default on most phones: full text search: searches all address book contents, messages, anything else being a plus better call management: e.g. a rotating audio call log, meaning you always have the last N calls recorded for your listening pleasure later (your little girl just said her first "da-da" while you were on a business trip, you had a telephone job interview, you received complex instructions to do something etc.) bluetooth remote control (like e.g. anyRemote, but available by default on a bluetooth phone) no multitasking capabilities worth mentioning and in general no e.g. weekly software updates, making the phone much more usable (even if it had to be done over USB, rather than over the network). I'm sure I was dumbfounded by the lack or design of other features as well, but they don't come to mind right now. To clarify, I'm not talking about smartphones here: my plain, 2-year old phone has a CPU an order of magnitude faster than my first PC, about as much storage space and it's ridiculous how bad (slow, unwieldy) the software is and it's not one phone or one manufacturer. What keeps the (to me) obvious software functionality vacuum on a capable hardware platform from being filled up? Edit: I believe a clarification on the multitasking point might be beneficial. I'll use my phone as an example, although the point is much more general. The phone can multitask and in fact does: you can listen to music and do something else at the same time. On the other hand, the way the software has been designed makes multitasking next to useless. (Ditto with the external touch screen: it can take touch commands, but only one application makes use of it, and only with 3 commands.) To take the multitasking example to the extreme, if I plug my phone into my laptop and it registers as an external disk, it doesn't allow any kind of operation: messages, calling, calendar, everything out of reach, although I can receive a call. No "battery life" issue there: it's charging while connected. BTW, another example of design below the current state of the art: I don't see a phone on the horizon which will remember where in an audio or video file you were when you stopped listening/watching it last time (podcasts are a good use case). Simplistic rewind/fast forward functionality only aggravates the problem.

  Read the article

• finishing some functions in this code

  - by osabri

  i have problem to finish some functions in this code program lab4; var inFile : text; var pArray : array[1..10]of real; //array of 10 integer values containing patterns to search in a given set of numbers var rArray : array[1..10]of integer; //array containing result of pattern search, each index in rArray coresponds to number of occurences of //pattern from pArray in sArray. var sArray : array[1..100] of real; //array containing data read from file var accuracy : real; (****************************************************************************) function errMsg:integer; begin if ParamCount < 3 then begin writeln('Too few arguments'); writeln('Usage: ./lab4 lab4.txt <accuracy> <pattern_1> <pattern_2> <pattern_n>'); errMsg:=-1; end else if ParamCount > 12 then begin writeln('Too many arguments'); writeln('Maximum number of patterns is 10'); errMsg:=-1; end else begin assign(inFile,ParamStr(1)); {$I-} reset(inFile); if ioresult<>0 then begin writeln('Cannot open ',ParamStr(1)); errMsg:=-1; end else errMsg:=0; end; end; (****************************************************************************) procedure readPattern; var errPos,idx:integer; begin if errMsg=0 then begin for idx:=1 to ParamCount-2 do begin Val(ParamStr(idx+2),pArray[idx],errPos); writeln('pArray:',pArray[idx]:2:2); end; end; end; (****************************************************************************) procedure getAccuracy; //Function should get the accuracy as the first param (after the program name) begin (here where i stopped : (( ) end; (****************************************************************************) function readSet:integer; //Function returns number of elements read from file var idx,errPos:integer; var sChar: string; begin if errMsg=0 then begin idx:=1; repeat begin readln(inFile,sChar); VAL(sChar,sArray[idx],errPos); writeln('sArray:',sArray[idx]:2:2); idx:=idx+1; end until eof(inFile)=TRUE; end; readSet:=idx-1; end; (****************************************************************************) procedure searchPattern(sNumber:integer); //Function should search and count pattern(patterns) occurence in a given set what the best solution for this part?? (****************************************************************************) procedure dispResult; //Function should display the result of pattern(patterns) search begin (****************************************************************************) begin readPattern; getAccuracy; searchPattern(readSet); dispResult; end.

  Read the article

• [C#] Not enough memory or not enough handles?

  - by Nayan

  I am working on a large scale project where a custom (pretty good and robust) framework has been provided and we have to use that for showing up forms and views. There is abstract class StrategyEditor (derived from some class in framework) which is instantiated whenever a new StrategyForm is opened. StrategyForm (a customized window frame) contains StrategyEditor. StrategyEditor contains StrategyTab. StrategyTab contains StrategyCanvas. This is a small portion of the big classes to clarify that there are many objects that will be created if one StrategyForm object is allocated in memory at run-time. My component owns all these classes mentioned above except StrategyForm whose code is not in my control. Now, at run-time, user opens up many strategy objects (which trigger creation of new StrategyForm object.) After creating approx. 44 strategy objects, we see that the USER OBJECT HANDLES (I'll use UOH from here onwards) created by the application reaches to about 20k+, while in registry the default amount for handles is 10k. Read more about User Objects here. Testing on different machines made it clear that the number of strategy objects opened is different for message to pop-up - on one m/c if it is 44, then it can be 40 on another. When we see the message pop-up, it means that the application is going to respond slowly. It gets worse with few more objects and then creation of window frames and subsequent objects fail. We first thought that it was not-enough-memory issue. But then reading more about new in C# helped in understanding that an exception would be thrown if app ran out of memory. This is not a memory issue then, I feel (task manager also showed 1.5GB+ available memory.) M/C specs Core 2 Duo 2GHz+ 4GB RAM 80GB+ free disk space for page file Virtual Memory set: 4000 - 6000 My questions Q1. Does this look like a memory issue and I am wrong that it is not? Q2. Does this point to exhaustion of free UOHs (as I'm thinking) and which is resulting in failure of creation of window handles? Q3. How can we avoid loading up of an StrategyEditor object (beyond a threshold, keeping an eye on the current usage of UOHs)? (we already know how to fetch number of UOHs in use, so don't go there.) Keep in mind that the call to new StrategyForm() is outside the control of my component. Q4. I am bit confused - what are Handles to user objects exactly? Is MSDN talking about any object that we create or only some specific objects like window handles, cursor handles, icon handles? Q5. What exactly cause to use up a UOH? (almost same as Q4) I would be really thankful to anyone who can give me some knowledgeable answers. Thanks much! :)

  Read the article

• (static initialization order?!) problems with factory pattern

  - by smerlin

  Why does following code raise an exception (in createObjects call to map::at) alternativly the code (and its output) can be viewed here intererestingly the code works as expected if the commented lines are uncommented with both microsoft and gcc compiler (see here), this even works with initMap as ordinary static variable instead of static getter. The only reason for this i can think of is that the order of initialization of the static registerHelper_ object (factory_helper_)and the std::map object (initMap) are wrong, however i cant see how that could happen, because the map object is constructed on first usage and thats in factory_helper_ constructor, so everything should be alright shouldnt it ? I am even more suprised that those doNothing() lines fix the issue, because that call to doNothing() would happen after the critical section (which currently fails) is passed anyway. EDIT: debugging showed, that without the call to factory_helper_.doNothing(), the constructor of factory_helper_ is never called. #include <iostream> #include <string> #include <map> #define FACTORY_CLASS(classtype) \ extern const char classtype##_name_[] = #classtype; \ class classtype : FactoryBase<classtype,classtype##_name_> namespace detail_ { class registerHelperBase { public: registerHelperBase(){} protected: static std::map<std::string, void * (*)(void)>& getInitMap() { static std::map<std::string, void * (*)(void)>* initMap = 0; if(!initMap) initMap= new std::map<std::string, void * (*)(void)>(); return *initMap; } }; template<class TParent, const char* ClassName> class registerHelper_ : registerHelperBase { static registerHelper_ help_; public: //void doNothing(){} registerHelper_(){ getInitMap()[std::string(ClassName)]=&TParent::factory_init_; } }; template<class TParent, const char* ClassName> registerHelper_<TParent,ClassName> registerHelper_<TParent,ClassName>::help_; } class Factory : detail_::registerHelperBase { private: Factory(); public: static void* createObject(const std::string& objclassname) { return getInitMap().at(objclassname)(); } }; template <class TClass, const char* ClassName> class FactoryBase { private: static detail_::registerHelper_<FactoryBase<TClass,ClassName>,ClassName> factory_helper_; static void* factory_init_(){ return new TClass();} public: friend class detail_::registerHelper_<FactoryBase<TClass,ClassName>,ClassName>; FactoryBase(){ //factory_helper_.doNothing(); } virtual ~FactoryBase(){}; }; template <class TClass, const char* ClassName> detail_::registerHelper_<FactoryBase<TClass,ClassName>,ClassName> FactoryBase<TClass,ClassName>::factory_helper_; FACTORY_CLASS(Test) { public: Test(){} }; int main(int argc, char** argv) { try { Test* test = (Test*) Factory::createObject("Test"); } catch(const std::exception& ex) { std::cerr << "caught std::exception: "<< ex.what() << std::endl; } #ifdef _MSC_VER system("pause"); #endif return 0; }

  Read the article

• Is this a right way to use NHibernate?

  - by Venemo

  I spent the rest of the evening reading StackOverflow questions and also some blog entries and links about the subject. All of them turned out to be very helpful, but I still feel that they don't really answer my question. So, I'm developing a simple web application. I'd like to create a reusable data access layer which I can later reuse in other solutions. 99% of these will be web applications. This seems to be a good excuse for me to learn NHibernate and some of the patterns around it. My goals are the following: I don't want the business logic layer to know ANYTHING about the inner workings of the database, nor NHibernate itself. I want the business logic layer to have the least possible number of assumptions about the data access layer. I want the data access layer as simplistic and easy-to-use as possible. This is going to be a simple project, so I don't want to overcomplicate anything. I want the data access layer to be as non-intrusive as possible. Will all this in mind, I decided to use the popular repository pattern. I read about this subject on this site and on various dev blogs, and I heard some stuff about the unit of work pattern. I also looked around and checked out various implementations. (Including FubuMVC contrib, and SharpArchitecture, and stuff on some blogs.) I found out that most of these operate with the same principle: They create a "unit of work" which is instantiated when a repository is instantiated, they start a transaction, do stuff, and commit, and then start all over again. So, only one ISession per Repository and that's it. Then the client code needs to instantiate a repository, do stuff with it, and then dispose. This usage pattern doesn't meet my need of being as simplistic as possible, so I began thinking about something else. I found out that NHibernate already has something which makes custom "unit of work" implementations unnecessary, and that is the CurrentSessionContext class. If I configure the session context correctly, and do the clean up when necessary, I'm good to go. So, I came up with this: I have a static class called NHibernateHelper. Firstly, it has a static property called CurrentSessionFactory, which upon first call, instantiates a session factory and stores it in a static field. (One ISessionFactory per one AppDomain is good enough.) Then, more importantly, it has a CurrentSession static property, which checks if there is an ISession bound to the current session context, and if not, creates one, and binds it, and it returns with the ISession bound to the current session context. Because it will be used mostly with WebSessionContext (so, one ISession per HttpRequest, although for the unit tests, I configured ThreadStaticSessionContext), it should work seamlessly. And after creating and binding an ISession, it hooks an event handler to the HttpContext.Current.ApplicationInstance.EndRequest event, which takes care of cleaning up the ISession after the request ends. (Of course, it only does this if it is really running in a web environment.) So, with all this set up, the NHibernateHelper will always be able to return a valid ISession, so there is no need to instantiate a Repository instance for the "unit of work" to operate properly. Instead, the Repository is a static class which operates with the ISession from the NHibernateHelper.CurrentSession property, and exposes some functionality through that. I'm curious, what do you think about this? Is it a valid way of thinking, or am I completely off track here?

  Read the article

• Large concurrent user performance issues for Apache + mod_jk + GlassFish v3.1 clusters

  - by user10035

  I am running a java ee 6 ear application on a GlassFish v3.1 ( 2 clusters with 2 instances each) load balanced by an Apache v2.2 with mod_jk - all on the same server (Windows Server 2003 R2, Intel Xeon CPU x5670 @2.93Ghz, 6GB RAM, 2 cpus). The web application is accessed by around ~100 users. When they all try to access it at the same time every morning ~8am, the response is very slow while trying to access the main jsf home page. Apart from that I have seen the CPU usage spike upto 99% by the httpd process during the day frequently and I start seeing errors in the mod_jk.log file. [Wed Jun 08 08:25:43 2011] [9380:8216] [info] ajp_process_callback::jk_ajp_common.c (1885): Writing to client aborted or client network problems [Wed Jun 08 08:25:43 2011] [9380:8216] [info] ajp_service::jk_ajp_common.c (2543): (myAppLocalInstance4) sending request to tomcat failed (unrecoverable), because of client write error (attempt=1) Any suggestions on how I can go about improving this? Apache configuration is mostly the default as shown below ServerRoot "C:/Program Files/Apache Software Foundation/Apache2.2" Listen 80 LoadModule actions_module modules/mod_actions.so LoadModule alias_module modules/mod_alias.so LoadModule asis_module modules/mod_asis.so LoadModule auth_basic_module modules/mod_auth_basic.so LoadModule authn_default_module modules/mod_authn_default.so LoadModule authn_file_module modules/mod_authn_file.so LoadModule authz_default_module modules/mod_authz_default.so LoadModule authz_groupfile_module modules/mod_authz_groupfile.so LoadModule authz_host_module modules/mod_authz_host.so LoadModule authz_user_module modules/mod_authz_user.so LoadModule autoindex_module modules/mod_autoindex.so LoadModule cgi_module modules/mod_cgi.so LoadModule dir_module modules/mod_dir.so LoadModule env_module modules/mod_env.so LoadModule include_module modules/mod_include.so LoadModule isapi_module modules/mod_isapi.so LoadModule log_config_module modules/mod_log_config.so LoadModule mime_module modules/mod_mime.so LoadModule negotiation_module modules/mod_negotiation.so LoadModule setenvif_module modules/mod_setenvif.so <IfModule !mpm_netware_module> <IfModule !mpm_winnt_module> User daemon Group daemon </IfModule> </IfModule> DocumentRoot "C:/Program Files/Apache Software Foundation/Apache2.2/htdocs" <Directory /> Options FollowSymLinks AllowOverride None Order deny,allow Deny from all </Directory> <Directory "C:/Program Files/Apache Software Foundation/Apache2.2/htdocs"> Options Indexes FollowSymLinks AllowOverride None Order allow,deny Allow from all </Directory> <IfModule dir_module> DirectoryIndex index.html </IfModule> <FilesMatch "^\.ht"> Order allow,deny Deny from all Satisfy All </FilesMatch> ErrorLog "logs/error.log" LogLevel warn <IfModule log_config_module> LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common <IfModule logio_module> LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio </IfModule> CustomLog "logs/access.log" common </IfModule> <IfModule alias_module> ScriptAlias /cgi-bin/ "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin/" </IfModule> <Directory "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin"> AllowOverride None Options None Order allow,deny Allow from all </Directory> DefaultType text/plain <IfModule mime_module> TypesConfig conf/mime.types AddType application/x-compress .Z AddType application/x-gzip .gz .tgz </IfModule> Include conf/extra/httpd-mpm.conf <IfModule ssl_module> SSLRandomSeed startup builtin SSLRandomSeed connect builtin </IfModule> LoadModule jk_module modules/mod_jk.so JkWorkersFile conf/workers.properties JkLogFile logs/mod_jk.log JkLogLevel info JkLogStampFormat "[%a %b %d %H:%M:%S %Y] " JkOptions +ForwardKeySize +ForwardURICompat -ForwardDirectories JkRequestLogFormat "%w %V %T" JkMount /myApp/* loadbalancerLocal JkMount /myAppRemote/* loadbalancerRemote JkMount /myApp loadbalancerLocal JkMount /myAppRemote loadbalancerRemote The workers.properties config file is: worker.list=loadbalancerLocal,loadbalancerRemote worker.myAppLocalInstance1.type=ajp13 worker.myAppLocalInstance1.host=localhost worker.myAppLocalInstance1.port=8109 worker.myAppLocalInstance1.lbfactor=1 worker.myAppLocalInstance1.socket_keepalive=1 worker.myAppLocalInstance1.socket_timeout=1000 worker.myAppLocalInstance2.type=ajp13 worker.myAppLocalInstance2.host=localhost worker.myAppLocalInstance2.port=8209 worker.myAppLocalInstance2.lbfactor=1 worker.myAppLocalInstance2.socket_keepalive=1 worker.myAppLocalInstance2.socket_timeout=1000 worker.myAppLocalInstance3.type=ajp13 worker.myAppLocalInstance3.host=localhost worker.myAppLocalInstance3.port=8309 worker.myAppLocalInstance3.lbfactor=1 worker.myAppLocalInstance3.socket_keepalive=1 worker.myAppLocalInstance3.socket_timeout=1000 worker.myAppLocalInstance4.type=ajp13 worker.myAppLocalInstance4.host=localhost worker.myAppLocalInstance4.port=8409 worker.myAppLocalInstance4.lbfactor=1 worker.myAppLocalInstance4.socket_keepalive=1 worker.myAppLocalInstance4.socket_timeout=1000 worker.myAppRemoteInstance1.type=ajp13 worker.myAppRemoteInstance1.host=localhost worker.myAppRemoteInstance1.port=8509 worker.myAppRemoteInstance1.lbfactor=1 worker.myAppRemoteInstance1.socket_keepalive=1 worker.myAppRemoteInstance1.socket_timeout=1000 worker.myAppRemoteInstance2.type=ajp13 worker.myAppRemoteInstance2.host=localhost worker.myAppRemoteInstance2.port=8609 worker.myAppRemoteInstance2.lbfactor=1 worker.myAppRemoteInstance2.socket_keepalive=1 worker.myAppRemoteInstance2.socket_timeout=1000 worker.myAppRemoteInstance3.type=ajp13 worker.myAppRemoteInstance3.host=localhost worker.myAppRemoteInstance3.port=8709 worker.myAppRemoteInstance3.lbfactor=1 worker.myAppRemoteInstance3.socket_keepalive=1 worker.myAppRemoteInstance3.socket_timeout=1000 worker.myAppRemoteInstance4.type=ajp13 worker.myAppRemoteInstance4.host=localhost worker.myAppRemoteInstance4.port=8809 worker.myAppRemoteInstance4.lbfactor=1 worker.myAppRemoteInstance4.socket_keepalive=1 worker.myAppRemoteInstance4.socket_timeout=1000 worker.loadbalancerLocal.type=lb worker.loadbalancerLocal.sticky_session=True worker.loadbalancerLocal.balance_workers=myAppLocalInstance1,myAppLocalInstance2,myAppLocalInstance3,myAppLocalInstance4 worker.loadbalancerRemote.type=lb worker.loadbalancerRemote.balance_workers=myAppRemoteInstance1,myAppRemoteInstance2,myAppRemoteInstance3,myAppRemoteInstance4 worker.loadbalancerRemote.sticky_session=True

  Read the article

• App dies on startup but not crash report

  - by brettr

  I've given an ad hoc version of my app to some users. Two of them have the app die on start up while one user has no issues. I can also install the ad hoc without issue...but that is always the case for me. One user sent the info below from the Xcode Organizer Console. They didn't find any crash logs. I don't know what to make of the info below. The one thing that stands out is "Permission denied". I place the provisioning and myapp.app files in a dropbox folder. The user then retrieves the files from the same location. I've run codesign against the .app file in the dropbox and get valid output: codesign -vvvv myapp.app myapp.app: valid on disk myapp.app: satisfies its Designated Requirement Any one have some ideas how I can figure out why the app doesn't work for this user? Here is the Console output from one user. They couldn't find any associated crash logs: Stats totalMLSITDBPostProcessing=5.31s commands=0.01 misc=0.45s icuSort=4.41s (MLS_icu_data=0.23s, MLS_icu_sec_data=0.13, dropIdx=0.04, normalize=0.13, update_orders=1.31, tStatsICUOther1=0.02, createIndex=2.50) Sun Dec 13 12:35:04 unknown com.apple.launchd[1] <Error>: (UIKitApplication:com.cygen.myapp[0x8cb6]) posix_spawn("/var/mobile/Applications/4B036396-3294-4E0A-BBCC-4118E72846D4/myapp.app/myapp", ...): Permission denied Sun Dec 13 12:35:04 unknown com.apple.launchd[1] <Warning>: (UIKitApplication:com.cygen.myapp[0x8cb6]) Exited with exit code: 1 Sun Dec 13 12:35:04 unknown SpringBoard[24] <Warning>: Failed to spawn myapp. Unable to obtain a task name port right for pid 179: (os/kern) failure Sun Dec 13 12:35:04 unknown com.apple.launchd[1] <Warning>: (UIKitApplication:com.cygen.myapp[0x8cb6]) Throttling respawn: Will start in 2147483647 seconds Sun Dec 13 12:35:04 unknown SpringBoard[24] <Warning>: Application 'myapp' exited abnormally with exit status 1 Sun Dec 13 12:35:10 unknown springboardservicesrelay[155] <Warning>: Unable to parse property list data of length: 0 Sun Dec 13 12:35:13 unknown com.apple.launchd[1] <Error>: (UIKitApplication:com.cygen.myapp[0x3ce5]) posix_spawn("/var/mobile/Applications/4B036396-3294-4E0A-BBCC-4118E72846D4/myapp.app/myapp", ...): Permission denied Sun Dec 13 12:35:13 unknown com.apple.launchd[1] <Warning>: (UIKitApplication:com.cygen.myapp[0x3ce5]) Exited with exit code: 1 Sun Dec 13 12:35:13 unknown SpringBoard[24] <Warning>: Failed to spawn myapp. Unable to obtain a task name port right for pid 182: (os/kern) failure Sun Dec 13 12:35:13 unknown com.apple.launchd[1] <Warning>: (UIKitApplication:com.cygen.myapp[0x3ce5]) Throttling respawn: Will start in 2147483647 seconds Sun Dec 13 12:35:13 unknown SpringBoard[24] <Warning>: Application 'myapp' exited abnormally with exit status 1

  Read the article

• MKMap showing detail of annotations

  - by yeohchan

  I have encountered a problem of populating the description for each annotation. Each annotation works, but there is somehow an area when trying to click on it. Here is the code. the one in bold is the one that has the problem. -(void)viewDidLoad{ FlickrFetcher *fetcher=[FlickrFetcher sharedInstance]; NSArray *rec=[fetcher recentGeoTaggedPhotos]; for(NSDictionary *dic in rec){ NSLog(@"%@",dic); NSDictionary *string = [fetcher locationForPhotoID:[dic objectForKey:@"id"]]; double latitude = [[string objectForKey:@"latitude"] doubleValue]; double longitude = [[string objectForKey:@"longitude"]doubleValue]; if(latitude !=0 && latitude != 0 ){ CLLocationCoordinate2D coordinate1 = { latitude,longitude }; **NSDictionary *adress=[NSDictionary dictionaryWithObjectsAndKeys:[dic objectForKey:@"owner"],[dic objectForKey:@"title"],nil];** MKPlacemark *anArea=[[MKPlacemark alloc]initWithCoordinate:coordinate1 addressDictionary:adress]; [mapView addAnnotation:anArea]; } } } Here is what the Flickr class does: #import <Foundation/Foundation.h> #define TEST_HIGH_NETWORK_LATENCY 0 typedef enum { FlickrFetcherPhotoFormatSquare, FlickrFetcherPhotoFormatLarge } FlickrFetcherPhotoFormat; @interface FlickrFetcher : NSObject { NSManagedObjectModel *managedObjectModel; NSManagedObjectContext *managedObjectContext; NSPersistentStoreCoordinator *persistentStoreCoordinator; } // Returns the 'singleton' instance of this class + (id)sharedInstance; // // Local Database Access // // Checks to see if any database exists on disk - (BOOL)databaseExists; // Returns the NSManagedObjectContext for inserting and fetching objects into the store - (NSManagedObjectContext *)managedObjectContext; // Returns an array of objects already in the database for the given Entity Name and Predicate - (NSArray *)fetchManagedObjectsForEntity:(NSString*)entityName withPredicate:(NSPredicate*)predicate; // Returns an NSFetchedResultsController for a given Entity Name and Predicate - (NSFetchedResultsController *)fetchedResultsControllerForEntity:(NSString*)entityName withPredicate:(NSPredicate*)predicate; // // Flickr API access // NOTE: these are blocking methods that wrap the Flickr API and wait on the results of a network request // // Returns an array of Flickr photo information for photos with the given tag - (NSArray *)photosForUser:(NSString *)username; // Returns an array of the most recent geo-tagged photos - (NSArray *)recentGeoTaggedPhotos; // Returns a dictionary of user info for a given user ID. individual photos contain a user ID keyed as "owner" - (NSString *)usernameForUserID:(NSString *)userID; // Returns the photo for a given server, id and secret - (NSData *)dataForPhotoID:(NSString *)photoID fromFarm:(NSString *)farm onServer:(NSString *)server withSecret:(NSString *)secret inFormat:(FlickrFetcherPhotoFormat)format; // Returns a dictionary containing the latitue and longitude where the photo was taken (among other information) - (NSDictionary *)locationForPhotoID:(NSString *)photoID; @end

  Read the article

• In Exim, is RBL spam rejected prior to being scanned by SpamAssassin?

  - by user955664

  I've recently been battling spam issues on our mail server. One account in particular was getting hammered with incoming spam. SpamAssassin's memory use is one of our concerns. What I've done is enable RBLs in Exim. I now see many rejection notices in the Exim log based on the various RBLs, which is good. However, when I run Eximstats, the numbers seem to be the same as they were prior to the enabling of the RBLs. I am assuming because the email is still logged in some way prior to the rejection. Is that what's happening, or am I missing something else? Does anyone know if these emails are rejected prior to being processed by SpamAssassin? Or does anyone know how I'd be able to find out? Is there a standard way to generate SpamAssassin stats, similar to Eximstats, so that I could compare the numbers? Thank you for your time and any advice. Edit: Here is the ACL section of my Exim configuration file ###################################################################### # ACLs # ###################################################################### begin acl # ACL that is used after the RCPT command check_recipient: # to block certain wellknown exploits, Deny for local domains if # local parts begin with a dot or contain @ % ! / | deny domains = +local_domains local_parts = ^[.] : ^.*[@%!/|] # to restrict port 587 to authenticated users only # see also daemon_smtp_ports above accept hosts = +auth_relay_hosts condition = ${if eq {$interface_port}{587} {yes}{no}} endpass message = relay not permitted, authentication required authenticated = * # allow local users to send outgoing messages using slashes # and vertical bars in their local parts. # Block outgoing local parts that begin with a dot, slash, or vertical # bar but allows them within the local part. # The sequence \..\ is barred. The usage of @ % and ! is barred as # before. The motivation is to prevent your users (or their virii) # from mounting certain kinds of attacks on remote sites. deny domains = !+local_domains local_parts = ^[./|] : ^.*[@%!] : ^.*/\\.\\./ # local source whitelist # accept if the source is local SMTP (i.e. not over TCP/IP). # Test for this by testing for an empty sending host field. accept hosts = : # sender domains whitelist # accept if sender domain is in whitelist accept sender_domains = +whitelist_domains # sender hosts whitelist # accept if sender host is in whitelist accept hosts = +whitelist_hosts accept hosts = +whitelist_hosts_ip # envelope senders whitelist # accept if envelope sender is in whitelist accept senders = +whitelist_senders # accept mail to postmaster in any local domain, regardless of source accept local_parts = postmaster domains = +local_domains # accept mail to abuse in any local domain, regardless of source accept local_parts = abuse domains = +local_domains # accept mail to hostmaster in any local domain, regardless of source accept local_parts = hostmaster domains =+local_domains # OPTIONAL MODIFICATIONS: # If the page you're using to notify senders of blocked email of how # to get their address unblocked will use a web form to send you email so # you'll know to unblock those senders, then you may leave these lines # commented out. However, if you'll be telling your senders of blocked # email to send an email to [email protected], then you should # replace "errors" with the left side of the email address you'll be # using, and "example.com" with the right side of the email address and # then uncomment the second two lines, leaving the first one commented. # Doing this will mean anyone can send email to this specific address, # even if they're at a blocked domain, and even if your domain is using # blocklists. # accept mail to [email protected], regardless of source # accept local_parts = errors # domains = example.com # deny so-called "legal" spammers" deny message = Email blocked by LBL - to unblock see http://www.example.com/ # only for domains that do want to be tested against RBLs domains = +use_rbl_domains sender_domains = +blacklist_domains # deny using hostname in bad_sender_hosts blacklist deny message = Email blocked by BSHL - to unblock see http://www.example.com/ # only for domains that do want to be tested against RBLs domains = +use_rbl_domains hosts = +bad_sender_hosts # deny using IP in bad_sender_hosts blacklist deny message = Email blocked by BSHL - to unblock see http://www.example.com/ # only for domains that do want to be tested against RBLs domains = +use_rbl_domains hosts = +bad_sender_hosts_ip # deny using email address in blacklist_senders deny message = Email blocked by BSAL - to unblock see http://www.example.com/ domains = +use_rbl_domains senders = +blacklist_senders # By default we do NOT require sender verification. # Sender verification denies unless sender address can be verified: # If you want to require sender verification, i.e., that the sending # address is routable and mail can be delivered to it, then # uncomment the next line. If you do not want to require sender # verification, leave the line commented out #require verify = sender # deny using .spamhaus deny message = Email blocked by SPAMHAUS - to unblock see http://www.example.com/ # only for domains that do want to be tested against RBLs domains = +use_rbl_domains dnslists = sbl.spamhaus.org # deny using ordb # deny message = Email blocked by ORDB - to unblock see http://www.example.com/ # # only for domains that do want to be tested against RBLs # domains = +use_rbl_domains # dnslists = relays.ordb.org # deny using sorbs smtp list deny message = Email blocked by SORBS - to unblock see http://www.example.com/ # only for domains that do want to be tested against RBLs domains = +use_rbl_domains dnslists = dnsbl.sorbs.net=127.0.0.5 # Next deny stuff from more "fuzzy" blacklists # but do bypass all checking for whitelisted host names # and for authenticated users # deny using spamcop deny message = Email blocked by SPAMCOP - to unblock see http://www.example.com/ hosts = !+relay_hosts domains = +use_rbl_domains !authenticated = * dnslists = bl.spamcop.net # deny using njabl deny message = Email blocked by NJABL - to unblock see http://www.example.com/ hosts = !+relay_hosts domains = +use_rbl_domains !authenticated = * dnslists = dnsbl.njabl.org # deny using cbl deny message = Email blocked by CBL - to unblock see http://www.example.com/ hosts = !+relay_hosts domains = +use_rbl_domains !authenticated = * dnslists = cbl.abuseat.org # deny using all other sorbs ip-based blocklist besides smtp list deny message = Email blocked by SORBS - to unblock see http://www.example.com/ hosts = !+relay_hosts domains = +use_rbl_domains !authenticated = * dnslists = dnsbl.sorbs.net!=127.0.0.6 # deny using sorbs name based list deny message = Email blocked by SORBS - to unblock see http://www.example.com/ domains =+use_rbl_domains # rhsbl list is name based dnslists = rhsbl.sorbs.net/$sender_address_domain # accept if address is in a local domain as long as recipient can be verified accept domains = +local_domains endpass message = "Unknown User" verify = recipient # accept if address is in a domain for which we relay as long as recipient # can be verified accept domains = +relay_domains endpass verify=recipient # accept if message comes for a host for which we are an outgoing relay # recipient verification is omitted because many MUA clients don't cope # well with SMTP error responses. If you are actually relaying from MTAs # then you should probably add recipient verify here accept hosts = +relay_hosts accept hosts = +auth_relay_hosts endpass message = authentication required authenticated = * deny message = relay not permitted # default at end of acl causes a "deny", but line below will give # an explicit error message: deny message = relay not permitted # ACL that is used after the DATA command check_message: accept

  Read the article

• One letter game problem?

  - by Alex K

  Recently at a job interview I was given the following problem: Write a script capable of running on the command line as python It should take in two words on the command line (or optionally if you'd prefer it can query the user to supply the two words via the console). Given those two words: a. Ensure they are of equal length b. Ensure they are both words present in the dictionary of valid words in the English language that you downloaded. If so compute whether you can reach the second word from the first by a series of steps as follows a. You can change one letter at a time b. Each time you change a letter the resulting word must also exist in the dictionary c. You cannot add or remove letters If the two words are reachable, the script should print out the path which leads as a single, shortest path from one word to the other. You can /usr/share/dict/words for your dictionary of words. My solution consisted of using breadth first search to find a shortest path between two words. But apparently that wasn't good enough to get the job :( Would you guys know what I could have done wrong? Thank you so much. import collections import functools import re def time_func(func): import time def wrapper(*args, **kwargs): start = time.time() res = func(*args, **kwargs) timed = time.time() - start setattr(wrapper, 'time_taken', timed) return res functools.update_wrapper(wrapper, func) return wrapper class OneLetterGame: def __init__(self, dict_path): self.dict_path = dict_path self.words = set() def run(self, start_word, end_word): '''Runs the one letter game with the given start and end words. ''' assert len(start_word) == len(end_word), \ 'Start word and end word must of the same length.' self.read_dict(len(start_word)) path = self.shortest_path(start_word, end_word) if not path: print 'There is no path between %s and %s (took %.2f sec.)' % ( start_word, end_word, find_shortest_path.time_taken) else: print 'The shortest path (found in %.2f sec.) is:\n=> %s' % ( self.shortest_path.time_taken, ' -- '.join(path)) def _bfs(self, start): '''Implementation of breadth first search as a generator. The portion of the graph to explore is given on demand using get_neighboors. Care was taken so that a vertex / node is explored only once. ''' queue = collections.deque([(None, start)]) inqueue = set([start]) while queue: parent, node = queue.popleft() yield parent, node new = set(self.get_neighbours(node)) - inqueue inqueue = inqueue | new queue.extend([(node, child) for child in new]) @time_func def shortest_path(self, start, end): '''Returns the shortest path from start to end using bfs. ''' assert start in self.words, 'Start word not in dictionnary.' assert end in self.words, 'End word not in dictionnary.' paths = {None: []} for parent, child in self._bfs(start): paths[child] = paths[parent] + [child] if child == end: return paths[child] return None def get_neighbours(self, word): '''Gets every word one letter away from the a given word. We do not keep these words in memory because bfs accesses a given vertex only once. ''' neighbours = [] p_word = ['^' + word[0:i] + '\w' + word[i+1:] + '$' for i, w in enumerate(word)] p_word = '|'.join(p_word) for w in self.words: if w != word and re.match(p_word, w, re.I|re.U): neighbours += [w] return neighbours def read_dict(self, size): '''Loads every word of a specific size from the dictionnary into memory. ''' for l in open(self.dict_path): l = l.decode('latin-1').strip().lower() if len(l) == size: self.words.add(l) if __name__ == '__main__': import sys if len(sys.argv) not in [3, 4]: print 'Usage: python one_letter_game.py start_word end_word' else: g = OneLetterGame(dict_path = '/usr/share/dict/words') try: g.run(*sys.argv[1:]) except AssertionError, e: print e

  Read the article

• Should we denormalize database to improve performance?

  - by Groo

  We have a requirement to store 500 measurements per second, coming from several devices. Each measurement consists of a timestamp, a quantity type, and several vector values. Right now there is 8 vector values per measurement, and we may consider this number to be constant for needs of our prototype project. We are using HNibernate. Tests are done in SQLite (disk file db, not in-memory), but production will probably be MsSQL. Our Measurement entity class is the one that holds a single measurement, and looks like this: public class Measurement { public virtual Guid Id { get; private set; } public virtual Device Device { get; private set; } public virtual Timestamp Timestamp { get; private set; } public virtual IList<VectorValue> Vectors { get; private set; } } Vector values are stored in a separate table, so that each of them references its parent measurement through a foreign key. We have done a couple of things to ensure that generated SQL is (reasonably) efficient: we are using Guid.Comb for generating IDs, we are flushing around 500 items in a single transaction, ADO.Net batch size is set to 100 (I think SQLIte does not support batch updates? But it might be useful later). The problem Right now we can insert 150-200 measurements per second (which is not fast enough, although this is SQLite we are talking about). Looking at the generated SQL, we can see that in a single transaction we insert (as expected): 1 timestamp 1 measurement 8 vector values which means that we are actually doing 10x more single table inserts: 1500-2000 per second. If we placed everything (all 8 vector values and the timestamp) into the measurement table (adding 9 dedicated columns), it seems that we could increase our insert speed up to 10 times. Switching to SQL server will improve performance, but we would like to know if there might be a way to avoid unnecessary performance costs related to the way database is organized right now. [Edit] With in-memory SQLite I get around 350 items/sec (3500 single table inserts), which I believe is about as good as it gets with NHibernate (taking this post for reference: http://ayende.com/Blog/archive/2009/08/22/nhibernate-perf-tricks.aspx). But I might as well switch to SQL server and stop assuming things, right? I will update my post as soon as I test it.

  Read the article

• php array code with regular expressions

  - by user551068

  there are few mistakes which it is showing as Warning: preg_match() [function.preg-match]: Delimiter must not be alphanumeric or backslash in array 4,9,10,11,12... can anyone resolve them <?PHP $hosts = array( array("ronmexico.kainalopallo.com/","beforename=$F_firstname%20$F_lastname&gender=$F_gender","Your Ron Mexico Name is ","/the ultimate disguise, is <u><b>([^<]+)<\/b><\/u>/s"), array("www.fjordstone.com/cgi-bin/png.pl","gender=$F_gender&submit=Name%20Me","Your Pagan name is ","/COLOR=#000000 SIZE=6> *([^<]*)<\/FONT>/"), array("rumandmonkey.com/widgets/toys/mormon/index.php","gender=$F_gender&firstname=$F_firstname&surname=$F_lastname","Your Mormon Name is ","/<p>My Mormon name is <b>([^<]+)<\/b>!<br \/>/s"), array("cyborg.namedecoder.com/index.php","acronym=$F_firstname&design=edox&design_click-edox.x=0&design_click-edox.y=0&design_click-edox=edo","","Your Cyborg Name is ","/<p>([^<]+)<\/p>/"), array("rumandmonkey.com/widgets/toys/namegen/10/","nametype=$brit&page=2&id=10&submit=God%20save%20the%20Queen!&name=$F_firstname%20$F_lastname","Your Very British Name is ","/My very British name is \&lt\;b\&gt;([^&]+)\&lt;\/b\&gt;\.\&lt;br/"), array("blazonry.com/name_generator/usname.php","realname=$F_firstname+$F_lastname&gender=$F_gender","Your U.S. Name is ","/also be known as <font size=\'\+1\'><b>([^<]+)<\/b>/s"), array("www.spacepirate.org/rogues.php","realname=$F_firstname%20$F_lastname&formentered=Yes&submit=Arrrgh","Your Space Pirate name is ","/Your pirate name is <font size=\'\+1\'><b>([^<]+)<\/b><\/font>/s"), array("rumandmonkey.com/widgets/toys/ghetto/","firstname=$F_firstname&lastname=$F_lastname","Your Ghetto Name is ","/<p align=\"center\" style=\"font-size: 36px\">\s*<br \/>\s*([^<]*)<br \/>/"), array("www.emmadavies.net/vampire/default.aspx","mf=$emgender&firstname=$F_firstname&lastname=$F_lastname&submit=Find+My+Vampire+Name","","Your Vampire Name is ","/<i class=\"vampirecontrol vampire name\">([^<]*)<\/i>/"), array("www.emmadavies.net/fairy/default.aspx","mf=$emgender&firstname=$F_firstname&lastname=$F_lastname&submit=Seek+Fairy","","Your Fairy Name is ","/<i class=\'ng fairy name\'>([^<]*)<\/i>/"), array("www.irielion.com/israel/reggaename.html","phase=3&oldname=$F_firstname%20$F_lastname&gndr=$reggender","","Your Rasta Name is ","/Yes I, your irie new name is ([^\n]*)\n/"), array("www.ninjaburger.com/fun/games/ninjaname/ninjaname.php","realname=$F_firstname+$F_lastname","Your Ninja Burger Name is ","/<BR>Ninja Burger ninja name will be<BR><BR><FONT SIZE=\'\+1\'>([^<]*)<\/FONT>/"), array("gangstaname.com/pirate_name.php","sex=$F_gender&name=$F_firstname+$F_lastname","Your Pirate Name is ","/<p><strong>We\'ll now call ye:<\/strong><\/p> *<h2 class=\"newName\">([^<]*)<\/h2>/"), array("www.xach.com/nerd-name/","name=$F_firstname+$F_lastname&gender=$F_gender","Your Nerd Name is ","/<p><div align=center class=\"nerdname\">([^<]*)<\/div>/"), array("rumandmonkey.com/widgets/toys/namegen/5941/","page=2&id=5941&nametype=$dj&name=$F_firstname+$F_lastname","Your DJ Name is ","/My disk spinnin nu name is &lt\;b&gt\;([^<]*)&lt\;\/b&gt\;\./"), array("pizza.sandwich.net/poke/pokecgi.cgi","name=$F_firstname%20$F_lastname&color=black&submit=%20send%20","Your Pokename is ","/Your Pok&eacute;name is: <h1>([^<]*)<\/h1>/") ); return $hosts; ?>

  Read the article

• Feeding PDF through IInternetSession to WebBrowser control - Error

  - by Codesleuth

  As related to my previous question, I have developed a temporary asynchronous pluggable protocol with the specific aim to be able to serve PDF documents directly to a WebBrowser control via a database. I need to do this because my limitations include not being able to access the disk other than IsolatedStorage; and a MemoryStream would be far better for serving up PDF documents that average around 31kb. Unfortunately the code doesn't work, and I'm getting an error from the WebBrowser control (i.e. IE): Unable to download . Unable to open this Internet site. The requested site is either unavailable or cannot be found. Please try again later. The line in my code where this occurs is within the following: pOIProtSink.ReportData(BSCF.BSCF_LASTDATANOTIFICATION, (uint)_stream.Length, (uint)_stream.Length); However, if you download the project and run it, you will be able to see the stream is successfully read and passed to the browser, so it seems like there's a problem somewhere to do with the end of reading the data: public uint Read(IntPtr pv, uint cb, out uint pcbRead) { var bytesToRead = Math.Min(cb, _streamBuffer.Length); pcbRead = (uint)_stream.Read(_streamBuffer, 0, (int)bytesToRead); Marshal.Copy(_streamBuffer, 0, pv, (int)pcbRead); return (pcbRead == 0 || pcbRead < cb) ? HRESULT.S_FALSE : HRESULT.S_OK; } Here is the entire sample project: InternetSessionSample.zip (VS2010) I will leave this up for as long as I can to help other people in the future If anyone has any ideas why I might be getting this message and can shed some light on the problem, I would be grateful for the assistance. EDIT: A friend suggested inserting a line that calls the IInternetProtocolSink.ReportProgress with BINDSTATUS_CACHEFILENAMEAVAILABLE pointing at the original file. This prevents it from failing now and shows the PDF in the Adobe Reader control, but means it defeats the purpose of this by having Adobe Reader simply load from the cache file (which I can't provide). See below: pOIProtSink.ReportProgress(BINDSTATUS.BINDSTATUS_CACHEFILENAMEAVAILABLE, @"D:\Visual Studio Solutions\Projects\InternetSessionSample\bin\Debug\sample.pdf"); pOIProtSink.ReportData(BSCF.BSCF_LASTDATANOTIFICATION, (uint)_stream.Length, (uint)_stream.Length); This is progress though, I guess.

  Read the article

• How can I load a file into a DataBag from within a Yahoo PigLatin UDF?

  - by Cervo

  I have a Pig program where I am trying to compute the minimum center between two bags. In order for it to work, I found I need to COGROUP the bags into a single dataset. The entire operation takes a long time. I want to either open one of the bags from disk within the UDF, or to be able to pass another relation into the UDF without needing to COGROUP...... Code: # **** Load files for iteration **** register myudfs.jar; wordcounts = LOAD 'input/wordcounts.txt' USING PigStorage('\t') AS (PatentNumber:chararray, word:chararray, frequency:double); centerassignments = load 'input/centerassignments/part-*' USING PigStorage('\t') AS (PatentNumber: chararray, oldCenter: chararray, newCenter: chararray); kcenters = LOAD 'input/kcenters/part-*' USING PigStorage('\t') AS (CenterID:chararray, word:chararray, frequency:double); kcentersa1 = CROSS centerassignments, kcenters; kcentersa = FOREACH kcentersa1 GENERATE centerassignments::PatentNumber as PatentNumber, kcenters::CenterID as CenterID, kcenters::word as word, kcenters::frequency as frequency; #***** Assign to nearest k-mean ******* assignpre1 = COGROUP wordcounts by PatentNumber, kcentersa by PatentNumber; assignwork2 = FOREACH assignpre1 GENERATE group as PatentNumber, myudfs.kmeans(wordcounts, kcentersa) as CenterID; basically my issue is that for each patent I need to pass the sub relations (wordcounts, kcenters). In order to do this, I do a cross and then a COGROUP by PatentNumber in order to get the set PatentNumber, {wordcounts}, {kcenters}. If I could figure a way to pass a relation or open up the centers from within the UDF, then I could just GROUP wordcounts by PatentNumber and run myudfs.kmeans(wordcount) which is hopefully much faster without the CROSS/COGROUP. This is an expensive operation. Currently this takes about 20 minutes and appears to tack the CPU/RAM. I was thinking it might be more efficient without the CROSS. I'm not sure it will be faster, so I'd like to experiment. Anyway it looks like calling the Loading functions from within Pig needs a PigContext object which I don't get from an evalfunc. And to use the hadoop file system, I need some initial objects as well, which I don't see how to get. So my question is how can I open a file from the hadoop file system from within a PIG UDF? I also run the UDF via main for debugging. So I need to load from the normal filesystem when in debug mode. Another better idea would be if there was a way to pass a relation into a UDF without needing to CROSS/COGROUP. This would be ideal, particularly if the relation resides in memory.. ie being able to do myudfs.kmeans(wordcounts, kcenters) without needing the CROSS/COGROUP with kcenters... But the basic idea is to trade IO for RAM/CPU cycles. Anyway any help will be much appreciated, the PIG UDFs aren't super well documented beyond the most simple ones, even in the UDF manual.

  Read the article

• What are good CLI tools for JSON?

  - by jasonmp85

  General Problem Though I may be diagnosing the root cause of an event, determining how many users it affected, or distilling timing logs in order to assess the performance and throughput impact of a recent code change, my tools stay the same: grep, awk, sed, tr, uniq, sort, zcat, tail, head, join, and split. To glue them all together, Unix gives us pipes, and for fancier filtering we have xargs. If these fail me, there's always perl -e. These tools are perfect for processing CSV files, tab-delimited files, log files with a predictable line format, or files with comma-separated key-value pairs. In other words, files where each line has next to no context. XML Analogues I recently needed to trawl through Gigabytes of XML to build a histogram of usage by user. This was easy enough with the tools I had, but for more complicated queries the normal approaches break down. Say I have files with items like this: <foo user="me"> <baz key="zoidberg" value="squid" /> <baz key="leela" value="cyclops" /> <baz key="fry" value="rube" /> </foo> And let's say I want to produce a mapping from user to average number of <baz>s per <foo>. Processing line-by-line is no longer an option: I need to know which user's <foo> I'm currently inspecting so I know whose average to update. Any sort of Unix one liner that accomplishes this task is likely to be inscrutable. Fortunately in XML-land, we have wonderful technologies like XPath, XQuery, and XSLT to help us. Previously, I had gotten accustomed to using the wonderful XML::XPath Perl module to accomplish queries like the one above, but after finding a TextMate Plugin that could run an XPath expression against my current window, I stopped writing one-off Perl scripts to query XML. And I just found out about XMLStarlet which is installing as I type this and which I look forward to using in the future. JSON Solutions? So this leads me to my question: are there any tools like this for JSON? It's only a matter of time before some investigation task requires me to do similar queries on JSON files, and without tools like XPath and XSLT, such a task will be a lot harder. If I had a bunch of JSON that looked like this: { "firstName": "Bender", "lastName": "Robot", "age": 200, "address": { "streetAddress": "123", "city": "New York", "state": "NY", "postalCode": "1729" }, "phoneNumber": [ { "type": "home", "number": "666 555-1234" }, { "type": "fax", "number": "666 555-4567" } ] } And wanted to find the average number of phone numbers each person had, I could do something like this with XPath: fn:avg(/fn:count(phoneNumber)) Questions Are there any command-line tools that can "query" JSON files in this way? If you have to process a bunch of JSON files on a Unix command line, what tools do you use? Heck, is there even work being done to make a query language like this for JSON? If you do use tools like this in your day-to-day work, what do you like/dislike about them? Are there any gotchas? I'm noticing more and more data serialization is being done using JSON, so processing tools like this will be crucial when analyzing large data dumps in the future. Language libraries for JSON are very strong and it's easy enough to write scripts to do this sort of processing, but to really let people play around with the data shell tools are needed. Related Questions Grep and Sed Equivalent for XML Command Line Processing Is there a query language for JSON? JSONPath or other XPath like utility for JSON/Javascript; or Jquery JSON

  Read the article

• "Attach or Add an entity that is not new...loaded from another DataContext. This is not supported."

  - by sah302

  Similar error as other questions, but not quite the same, I am not trying to attach anything. What I am trying to do is insert a new row into a linking table, specifically UserAccomplishment. Relations are set in LINQ to User and Accomplishment Tables. I have a generic insert function: Public Function insertRow(ByVal entity As ImplementationType) As Boolean If entity IsNot Nothing Then Dim lcfdatacontext As New LCFDataContext() Try lcfdatacontext.GetTable(Of ImplementationType)().InsertOnSubmit(entity) lcfdatacontext.SubmitChanges() lcfdatacontext.Dispose() Return True Catch ex As Exception Return False End Try Else Return False End If End Function If you try and give UserAccomplishment the two appropriate objects this will naturally crap out if either the User or Accomplishment already exist. It only works when both user and accomplishment don't exist. I expected this behavior. What does work is simply giving the userAccomplishment object a user.id and accomplishment.id and populating the rest of the fields. This works but is kind of awkward to use in my app, it would be much easier to simply pass in both objects and have it work out what already exists and what doesn't. Okay so I made the following (please ignore the fact that this is horribly inefficient because I know it is): Public Class UserAccomplishmentDao Inherits EntityDao(Of UserAccomplishment) Public Function insertLinkerObjectRow(ByVal userAccomplishment As UserAccomplishment) Dim insertSuccess As Boolean = False If Not userAccomplishment Is Nothing Then Dim userDao As New UserDao() Dim accomplishmentDao As New AccomplishmentDao() Dim user As New User() Dim accomplishment As New Accomplishment() 'see if either object already exists in db' user = userDao.getOneByValueOfProperty("Id", userAccomplishment.User.Id) accomplishment = accomplishmentDao.getOneByValueOfProperty("Id", userAccomplishment.Accomplishment.Id) If user Is Nothing And accomplishment Is Nothing Then 'neither the user or the accomplishment exist, both are new so insert them both, typical insert' insertSuccess = Me.insertRow(userAccomplishment) ElseIf user Is Nothing And Not accomplishment Is Nothing Then 'user is new, accomplishment is not new, so just insert the user, and the relation in userAccomplishment' Dim userWithExistingAccomplishment As New UserAccomplishment(userAccomplishment.User, userAccomplishment.Accomplishment.Id, userAccomplishment.LastUpdatedBy) insertSuccess = Me.insertRow(userWithExistingAccomplishment) ElseIf Not user Is Nothing And accomplishment Is Nothing Then 'user is not new, accomplishment is new, so just insert the accomplishment, and the relation in userAccomplishment' Dim existingUserWithAccomplishment As New UserAccomplishment(userAccomplishment.UserId, userAccomplishment.Accomplishment, userAccomplishment.LastUpdatedBy) insertSuccess = Me.insertRow(existingUserWithAccomplishment) Else 'both are not new, just add the relation' Dim userAccomplishmentBothExist As New UserAccomplishment(userAccomplishment.User.Id, userAccomplishment.Accomplishment.Id, userAccomplishment.LastUpdatedBy) insertSuccess = Me.insertRow(userAccomplishmentBothExist) End If End If Return insertSuccess End Function End Class Alright, here I basically check if the supplied user and accomplishment already exists in the db, and if so call an appropriate constructor that will leave whatever already exists empty, but supply the rest of the information so the insert can succeed. However, upon trying an insert: Dim result As Boolean = Me.userAccomplishmentDao.insertLinkerObjectRow(userAccomplishment) In which the user already exists, but the accomplishment does not (the 99% typical scenario) I get the error: "An attempt has been made to Attach or Add an entity that is not new, perhaps having been loaded from another DataContext. This is not supported." I have debugged this multiple times now and am not sure why this is occuring, if either User or Accomplishment exist, I am not including it in the final object to try to insert. So nothing appears to be attempted to be added. Even in debug, upon insert, the object was set to empty. So the accomplishment is new and the user is empty. 1) Why is it still saying that and how can I fix it ..using my current structure 2) Pre-emptive 'use repository pattern answers' - I know this way kind of sucks in general and I should be using the repository pattern. However, I can't use that in the current project because I don't have time to refactor that due to my non existence knowledge of it and time constraints. The usage of the app is going to so small that the inefficient use of datacontext's and what have you won't matter so much. I can refactor it once it's up and running, but for now I just need to 'push through' with my current structure. Edit: I also just tested this when having both already exists, and only insert each object's IDs into the table, that works. So I guess I could manually insert whichever object doesn't exist as a single insert, then put the ids only into the linking table, but I still don't know why when one object exists, and I make it empty, it doens't work.

  Read the article

• evaluating cost/benefits of using extension methods in C# => 3.0

  - by BillW

  Hi, In what circumstances (usage scenarios) would you choose to write an extension rather than sub-classing an object ? < full disclosure : I am not an MS employee; I do not know Mitsu Furota personally; I do know the author of the open-source Componax library mentioned here, but I have no business dealings with him whatsoever; I am not creating, or planning to create any commercial product using extensions : in sum : this post is from pure intellectal curiousity related to my trying to (continually) become aware of "best practices" I find the idea of extension methods "cool," and obviously you can do "far-out" things with them as in the many examples you can in Mitsu Furota's (MS) blog postslink text. A personal friend wrote the open-source Componax librarylink text, and there's some remarkable facilities in there; but he is in complete command of his small company with total control over code guidelines, and every line of code "passes through his hands." While this is speculation on my part : I think/guess other issues might come into play in a medium-to-large software team situation re use of Extensions. Looking at MS's guidelines at link text, you find : In general, you will probably be calling extension methods far more often than implementing your own. ... In general, we recommend that you implement extension methods sparingly and only when you have to. Whenever possible, client code that must extend an existing type should do so by creating a new type derived from the existing type. For more information, see Inheritance (C# Programming Guide). ... When the compiler encounters a method invocation, it first looks for a match in the type's instance methods. If no match is found, it will search for any extension methods that are defined for the type, and bind to the first extension method that it finds. And at Ms's link text : Extension methods present no specific security vulnerabilities. They can never be used to impersonate existing methods on a type, because all name collisions are resolved in favor of the instance or static method defined by the type itself. Extension methods cannot access any private data in the extended class. Factors that seem obvious to me would include : I assume you would not write an extension unless you expected it be used very generally and very frequently. On the other hand : couldn't you say the same thing about sub-classing ? Knowing we can compile them into a seperate dll, and add the compiled dll, and reference it, and then use the extensions : is "cool," but does that "balance out" the cost inherent in the compiler first having to check to see if instance methods are defined as described above. Or the cost, in case of a "name clash," of using the Static invocation methods to make sure your extension is invoked rather than the instance definition ? How frequent use of Extensions would affect run-time performance or memory use : I have no idea. So, I'd appreciate your thoughts, or knowing about how/when you do, or don't do, use Extensions, compared to sub-classing. thanks, Bill

  Read the article

• Need help identiying a nasty rootkit in Windows

  - by goofrider

  I have a nasty rootkit that not tools seem to be able to idenity. I know for sure it's a rootkit, but I can figure out which rootkit it is. Here's what I gathered so far: It creates multiple copies of itself in %HOME%\Local Settings\Temp with names like Q.EXE, IAJARZ.exe, etc., and install them as hidden services. These EXE have SysInternals identifiers in them so they're definitely rootkits. It hooked very deep in the system, including file read/write, security policies, registry read/write, and possibly WinSock/TCP/IP. When going to Sophos.com to download their software, the rootkit inject something called Microsoft Ajax Tootkit into the page, which injects code into the email submission form in order to redirect it. (EDIT: I might have panicked. Looks like Sophos does use an AJAZ email form, their form is just broken on Chrome so it looked like a mail form injection attack, the link is http://www.sophos.com/en-us/products/free-tools/virus-removal-tool/download.aspx ) Super-Antispyware found a lot of spyware cookies, in the name of .kaspersky.2o7.net, etc. (just chedk 2o7.net, looks like it's a legit ad company) I tried comparing DNS lookup from the infected systems and from system in other physical locations, no DNS redirections it seems. I used dd to copy the MBR and compared it with the MBR provided by ms-sys package, no differences so it's not infecting MBR. No antivirus or rootkit scanner be able to identify it. Most of them can't even find it. I tried scanning, in-situ (normal mode), in safe mode, and boot to linux live CD. Scanners used: Avast, Sophos anti rootkit, Kasersky TDSSKiller, GMER, RootkitRevealer, and many others. Kaspersky reported some unsigned system files that ought to be signed (e.g. tcpip.sys), and reported a number of MD5 mismatches. But otherwise couldn't identify anything based on signature. When running Sysinternal RootkitRevealer and Sophos AntiRootkit, CPU usage goes up to 100% and gets stucked. The Rootkit is blocking them. When trying running/installing HiJackThis, RootkitRevealer and some other scanners, it tells me system security policy prevent running/installing it. The list of malicious acitivities go on and on. here's a sample of logs from all my scans. In particular, aswSnx.SYS, apnenfno.sys and PROCMON20.SYS has a huge number of hooks. It's hard to tell if the rootkit replaced legit program files like aswSnx.SYS (from Avast) and PROCMON20.SYS (from Sysinternal Process Monitor). I can't find whether apnenfno.sys is from a legit program. Help to identify it is appreciated. Trend Micro RootkitBuster ------ [HIDDEN_REGISTRY][Hidden Reg Value]: KeyPath : HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\sptd\Cfg Root : 586bfc0 SubKey : Cfg ValueName : g0 Data : 38 23 E8 D0 BF F2 2D 6F ... ValueType : 3 AccessType: 0 FullLength: 61 DataSize : 32 [HOOKED_SERVICE_API]: Service API : ZwCreateMutant Image Path : C:\WINDOWS\System32\Drivers\aswSnx.SYS OriginalHandler : 0x8061758e CurrentHandler : 0xaa66cce8 ServiceNumber : 0x2b ModuleName : aswSnx.SYS SDTType : 0x0 [HOOKED_SERVICE_API]: Service API : ZwCreateThread Image Path : c:\windows\system32\drivers\apnenfno.sys OriginalHandler : 0x805d1038 CurrentHandler : 0xaa5f118c ServiceNumber : 0x35 ModuleName : apnenfno.sys SDTType : 0x0 [HOOKED_SERVICE_API]: Service API : ZwDeleteKey Image Path : C:\WINDOWS\system32\Drivers\PROCMON20.SYS OriginalHandler : 0x80624472 CurrentHandler : 0xa709b0f8 ServiceNumber : 0x3f ModuleName : PROCMON20.SYS SDTType : 0x0 HiJackThis ------ O23 - Service: JWAHQAGZ - Sysinternals - www.sysinternals.com - C:\DOCUME~1\jeff\LOCALS~1\Temp\JWAHQAGZ.exe O23 - Service: LHIJ - Sysinternals - www.sysinternals.com - C:\DOCUME~1\jeff\LOCALS~1\Temp\LHIJ.exe Kaspersky TDSSKiller ------ 21:05:58.0375 3936 C:\WINDOWS\system32\ati2sgag.exe - copied to quarantine 21:05:59.0217 3936 ATI Smart ( UnsignedFile.Multi.Generic ) - User select action: Quarantine 21:05:59.0342 3936 C:\WINDOWS\system32\BUFADPT.SYS - copied to quarantine 21:05:59.0856 3936 BUFADPT ( UnsignedFile.Multi.Generic ) - User select action: Quarantine 21:05:59.0965 3936 C:\Program Files\CrashPlan\CrashPlanService.exe - copied to quarantine 21:06:00.0152 3936 CrashPlanService ( UnsignedFile.Multi.Generic ) - User select action: Quarantine 21:06:00.0246 3936 C:\WINDOWS\system32\epmntdrv.sys - copied to quarantine 21:06:00.0433 3936 epmntdrv ( UnsignedFile.Multi.Generic ) - User select action: Quarantine 21:06:00.0464 3936 C:\WINDOWS\system32\EuGdiDrv.sys - copied to quarantine 21:06:00.0526 3936 EuGdiDrv ( UnsignedFile.Multi.Generic ) - User select action: Quarantine 21:06:00.0604 3936 C:\Program Files\Common Files\Macrovision Shared\FLEXnet Publisher\FNPLicensingService.exe - copied to quarantine 21:06:01.0181 3936 FLEXnet Licensing Service ( UnsignedFile.Multi.Generic ) - User select action: Quarantine 21:06:01.0321 3936 C:\Program Files\AddinForUNCFAT\UNCFATDMS.exe - copied to quarantine 21:06:01.0430 3936 OTFSDMS ( UnsignedFile.Multi.Generic ) - User select action: Quarantine 21:06:01.0492 3936 C:\WINDOWS\system32\DRIVERS\tcpip.sys - copied to quarantine 21:06:01.0539 3936 Tcpip ( UnsignedFile.Multi.Generic ) - User select action: Quarantine 21:06:01.0601 3936 C:\DOCUME~1\jeff\LOCALS~1\Temp\TULPUWOX.exe - copied to quarantine 21:06:01.0664 3936 HKLM\SYSTEM\ControlSet003\services\TULPUWOX - will be deleted on reboot 21:06:01.0664 3936 C:\DOCUME~1\jeff\LOCALS~1\Temp\TULPUWOX.exe - will be deleted on reboot 21:06:01.0664 3936 TULPUWOX ( UnsignedFile.Multi.Generic ) - User select action: Delete 21:06:01.0757 3936 C:\WINDOWS\system32\Drivers\usbaapl.sys - copied to quarantine 21:06:01.0866 3936 USBAAPL ( UnsignedFile.Multi.Generic ) - User select action: Quarantine 21:06:01.0913 3936 C:\Program Files\VMware\VMware Player\vmware-authd.exe - copied to quarantine 21:06:02.0443 3936 VMAuthdService ( UnsignedFile.Multi.Generic ) - User select action: Quarantine 21:06:02.0443 3936 vmount2 ( UnsignedFile.Multi.Generic ) - skipped by user 21:06:02.0443 3936 vmount2 ( UnsignedFile.Multi.Generic ) - User select action: Skip 21:06:02.0459 3936 vstor2 ( UnsignedFile.Multi.Generic ) - skipped by user 21:06:02.0459 3936 vstor2 ( UnsignedFile.Multi.Generic ) - User select action: Skip

  Read the article

• Why is this simple file upload not working? JSF

  - by Nitesh Panchal

  Hello, Why is this code not working? I always get size() = 0, whenever i upload file. xhtml file :- <?xml version='1.0' encoding='UTF-8' ?> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" xmlns:h="http://java.sun.com/jsf/html"> <h:head> <title>Abc</title> </h:head> <h:body> <center> <form method="post" enctype="multipart/form-data" id="form" action="/upload/uploadFile"> <input type="file"/> <br/> <input type="Submit" value="upload"/> </form> </center> </h:body> </html> This is my servlet :- package servlets; import java.io.IOException; import java.util.List; import java.util.logging.Level; import java.util.logging.Logger; import javax.servlet.ServletException; import javax.servlet.annotation.WebServlet; import javax.servlet.http.HttpServlet; import javax.servlet.http.HttpServletRequest; import javax.servlet.http.HttpServletResponse; import org.apache.commons.fileupload.FileItem; import org.apache.commons.fileupload.FileUploadException; import org.apache.commons.fileupload.disk.DiskFileItemFactory; import org.apache.commons.fileupload.servlet.ServletFileUpload; @WebServlet(name="uploadFile", urlPatterns={"/uploadFile"}) public class uploadFile extends HttpServlet { protected void processRequest(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException, FileUploadException { System.out.println("executed!"); List<FileItem> items = new ServletFileUpload(new DiskFileItemFactory()).parseRequest(request); System.out.println(items.size()); for (FileItem item : items) { if (!item.isFormField()) { System.out.println("Name: " + item.getName()); System.out.println("Size: " + item.getSize()); System.out.println("Type: " + item.getContentType()); } } } @Override protected void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException { try { processRequest(request, response); } catch (FileUploadException ex) { ex.printStackTrace(); } } @Override protected void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException { try { processRequest(request, response); } catch (FileUploadException ex) { ex.printStackTrace(); } } @Override public String getServletInfo() { return "Short description"; } }

  Read the article

• Modern alternatives to Java

  - by Ralph

  I have been a Java developer for 14 years and have written an enterprise-level (~500 kloc) Swing application that uses most of the standard library APIs. Recently, I have become disappointed with the progress that the language has made to "modernize" itself, and am looking for an alternative for ongoing development. I have considered moving to the .NET platform, but I have issues with using something the only runs well in Windows (I know about Mono, but that is still far behind Microsoft). I also plan on buying a new Macbook Pro as soon as Apple releases their new rumored Arrandale-based machines and want to develop in an environment that will feel "at home" in Unix/Linux. I have considered using Python or Ruby, but the standard Java library is arguably the largest of any modern language. In JVM-based languages, I looked at Groovy, but am disappointed with its performance. Rumor has it that with the soon-to-be released JDK7, with its InvokeDynamic instruction, this will improve, but I don't know how much. Groovy is also not truly a functional language, although it provides closures and some of the "functional" features on collections. It does not embrace immutability. I have narrowed my search down to two JVM-based alternatives: Scala and Clojure. Each has its strengths and weaknesses. I am looking for opinions. I am not an expert at either of these languages; I have read 2 1/2 books on Scala and am currently reading Stu Halloway's book on Clojure. Scala is strongly statically typed. I know the dynamic language folks claim that static typing is a crutch for not doing unit testing, but it does provide a mechanism for compile-time location of a whole class of errors. Scala is more concise than Java, but not as much as Clojure. Scala's inter-operation with Java seems to be better than Clojure's, in that most Java operations are easier to do in Scala than in Clojure. For example, I can find no way in Clojure to create a non-static initialization block in a class derived from a Java superclass. For example, I like the Apache commons CLI library for command line argument parsing. In Java and Scala, I can create a new Options object and add Option items to it in an initialization block as follows (Java code): final Options options = new Options() { { addOption(new Option("?", "help", false, "Show this usage information"); // other options } }; I can't figure out how to the same thing in Clojure (except by using (doit...)), although that may reflect my lack of knowledge of the language. Clojure's collections are optimized for immutability. They rarely require copy-on-write semantics. I don't know if Scala's immutable collections are implemented using similar algorithms, but Rich Hickey (Clojure's inventor) goes out of his way to explain how that language's data structures are efficient. Clojure was designed from the beginning for concurrency (as was Scala) and with modern multi-core processors, concurrency takes on more importance, but I occasionally need to write simple non-concurrent utilities, and Scala code probably runs a little faster for these applications since it discourages, but does not prohibit, "simple" mutability. One could argue that one-off utilities do not have to be super-fast, but sometimes they do tasks that take hours or days to complete. I know that there is no right answer to this "question", but I thought I would open it up for discussion. Are there other JVM-based languages that can be used for enterprise level development?

  Read the article

< Previous Page | 546 547 548 549 550 551 552 553 554 555 556 557  | Next Page >