Search Results

Search found 56208 results on 2249 pages for 'ini set'.

Page 550/2249 | < Previous Page | 546 547 548 549 550 551 552 553 554 555 556 557  | Next Page >

• Add 802.11n to existing 802.11g environment

  - by Andrew Robinson

  I have a small home network that is currently running 802.11g. Two computers that are capable of 802.11n and two devices (a BlackBerry and a Skype phone) that are limited to 802.11g. I have a few neighbors running 802.11g but their signals are very weak. How big an impact will the two G devices have on N speeds? Will they pull the whole network back down to G? These two devices are hardly ever used where as the other N devices are heavily used. If I add an N router to the network (instead of replacing the G) and set my existing G router to use channel 1 with 20MHz bandwidth and then set the N router to use 6 & 11 for 40MHz will I eliminate the overlap and allow for full speed on both networks?

  Read the article

• GNS3 Cannot ping/resolve DNS record

  - by Eldad Cohen

  I set up an internet lab with GNS3, which has 3 routers, in each node there is a computer directly connected. One of the hosts is a DNS server, Windows 2003 Server. The other one is a Windows XP machine. Ping is good between routers and machines but no ability to ping domain.com record on DNS server 2003. I set a static nat on the router to route all traffic from gateway to the DNS server internal ip address, still no answer for the dns request. Any ideas or thoughts will be most welcome.

  Read the article

• Computer to Tv cable question

  - by Keith D

  Hi all. Heres my query : I have a PC with all the usual outputs and a couple of TVs in the house with inputs to connect to a computer. Now, what i would like to do is get rid of cable TV and using the input into the spliters in the basement,( ie. where the input cable from outside actually feeds the system ) have the computer become the "Cable supplier" ( so to speak ) and have the output ( via some sort of box ) from the computer, convert what is on my monitor into an RF signal that is then fed into the cables in my house and ultimately to each TV / room . I don't know if there is such an item but would welcome any thoughts you might have on such a set up. I am not into HD or the like, so the picture quality needs only to be watchable, not HD. I don't want to have to set up seperate cables to feed the audio on each TV. Thanks in advance!

  Read the article

• SSH Port Forward 22

  - by j1199dm

  I'm trying to set up the following: At work I want to create a local port that will forward to port 22 on my home server. ssh -L 56879:home:22 username@home -p 443 right now I'm testing this on my two machines at home, my ubuntu server and the other my iMac. iMac: 192.168.1.104 ubuntu: 192.168.1.103 iMac - ssh -p 443 -L 56879:192.168.1.103:22 [email protected] in my ~/.ssh/config on my iMac I have port set to 56879. so when I do git pull remoteserver:/path/to/repo.git on my iMac git will use ssh client on my iMac and use port 56879 since setup in config which should forward to 22 on my ubuntu machine. I keep getting connection refused? Any ideas?

  Read the article

• cannot connect to MS FTP 7.5 on Windows 2008 on Amazon EC2 instance

  - by minerj

  I have just installed the MS FTP 7.5 upgrade on my Windows 2008 Server (Service Pack 2) running on an Amazon EC2 instance. In the FTP Firewall Support settings for the server in IIS Manager I have set up the passive port range 45001 - 45005 and also set the External Firewall IP address to match the assigned Amazon Elastic IP address. Using the AWS Console I changed the Security Group for the server to allow access to the server through ports 21 and 45001 through 45005. Using an FTP client (either the command line FTP client or Windows Explorer) on the Amazon server I can connect to the FTP server but I cannot connect with an external FTP client. When I checked to see which ports were open on the server using Shields Up it shows that port 21 is open but ports 45001 to 45005 are closed. I assume I'm missing something. Any help greatly appreciated.

  Read the article

• DJBDNS DNSCache configuration, svscan won't start

  - by SecurityGate

  I've been wracking my brain the last few days trying to setup DJBDNS on my server. I haven't been having too much luck. I have been following the guide provided by the creator of DJBDNS: http://cr.yp.to/djbdns/run-server.html Here is a run-through of where I am: Both services are up: [root@Happycat tinydns]$ svstat /service/tinydns/ /service/tinydns/: up (pid 18224) 74454 seconds [root@Happycat tinydns]$ svstat /service/dnscache/ /service/dnscache/: up (pid 2733) 2184 seconds My /etc/resolv.conf file: nameserver 127.0.0.1 My $PATH: [root@Happycat ~]$ echo $PATH /usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/sbin:/usr/sbin:/var/qmail/bin/:/usr/nexkit/bin:/root/bin My tinydns/root/data records: ..:69.160.56.65:a:259200 .ns1.benwilk.com:69.160.56.65:a:259200 .ns2.benwilk.com:69.160.56.65:a:259200 .56.160.69.in-addr.arpa:69.160.56.65:a:259200 .56.160.69.in-addr.arpa:69.160.56.65:b:259200 =benwilk.com:69.160.56.65:86400 =openbarrel.net:69.160.56.65:86400 +www.openbarrel.net:69.160.56.65:86400 +www.benwilk.com:69.160.56.65:86400 Tiny dns can recognize the records set: [root@Happycat root]$ tinydns-get a benwilk.com 1 benwilk.com: 78 bytes, 1+1+1+1 records, response, authoritative, noerror query: 1 benwilk.com answer: benwilk.com 86400 A 69.160.56.65 authority: . 259200 NS a.ns additional: a.ns 259200 A 69.160.56.65 But then it comes to a grinding halt: svscan /service/tinydns/ supervise: fatal: unable to start env/run: file does not exist supervise: fatal: unable to acquire log/supervise/lock: temporary failure supervise: fatal: unable to start supervise/run: file does not exist supervise: fatal: unable to start root/run: file does not exist supervise: fatal: unable to start env/run: file does not exist supervise: fatal: unable to start supervise/run: file does not exist supervise: fatal: unable to start root/run: file does not exist supervise: fatal: unable to start env/run: file does not exist supervise: fatal: unable to start supervise/run: file does not exist supervise: fatal: unable to start root/run: file does not exist supervise: fatal: unable to start env/run: file does not exist supervise: fatal: unable to start supervise/run: file does not exist supervise: fatal: unable to start root/run: file does not exist supervise: fatal: unable to start env/run: file does not exist supervise: fatal: unable to start supervise/run: file does not exist supervise: fatal: unable to start root/run: file does not exist supervise: fatal: unable to acquire log/supervise/lock: temporary failure supervise: fatal: unable to start env/run: file does not exist supervise: fatal: unable to start supervise/run: file does not exist supervise: fatal: unable to start root/run: file does not exist I'm assuming I have to set something with DNScache, and to be honest, it gets a bit confusing. I'm not sure whether to set it's IP address to 127.0.0.1 or one of the other IP addresses on the system. What am I missing from here?

  Read the article

• ASP.NET website http requests appear to be queueing

  - by scolemann

  We cloned our servers this weekend into a colo. All non-asp.net sites are performing great, but ASP.NET sites are very slow. It appears to be an issue with the requests/connections, but I cannot figure out where. The reason I think it is a problem with the connections is that when I launch fiddler and watch the requests, all requests appear to happen sequentially. Even the static image requests are taking 5 seconds and another one doesn't start until the first one finishes. MaxConnections is set to 100 in machine.config and the "website connections" are set to unlimited. Any idea what else coudld be causing this? from machine.config:

  Read the article

• cant send using postfix from external ip address

  - by daniel

  i have postfix set up as a satellite to listen on port 587 i can send email outside fine trough the postfix(ubuntu) box from the local network with no problems when i try to connect to the postfix(ubuntu) box from a external ip and send mail it spits back a 554 5.7.1 Relay access denied error i can telnet to it fine, just cant send mail this is my main.cf : smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no append_dot_mydomain = no readme_directory = no smtp_sasl_auth_enable = yes smtp_sasl_password_maps = hash:/etc/postfix/sasl_passwd smtp_sasl_security_options = smtp_use_tls = no myhostname = cotiso-desktop alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = mydomainname.com, cotiso-desktop, localhost.localdomain, localhost relayhost = smtp.mydomainname.com mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all inet_protocols = all there is no security set up yet, i'm just trying to get it working first any ideas? thanks in advance

  Read the article

• Network connection through a wall

  - by BCS

  I have a place where I want to set up a network connection through a normal residential wall where I can't cut any holes. I don't want to just set up a wireless system. Does anyone make a device that you place on either side of a wall to hook up a connection? Preferably something that can do 100Mb full duplex and can't be eavesdropped on with common hardware? The situation is that I'm moving into a new place (that I'm renting, so I can't do any cutting) and the POP is in one room and I have all the equipment is in another room.

  Read the article

• hardware addressing and configurable addressing scheme

  - by Zia ur Rahman

  basically i want to ask question about configurable addressing scheme for LAN interface hardware. i have read about it from a book, some main points are given by a configurable addressing scheme provides a mechanism that a customer can use to set a physical address.The mechanism can be manual (the switches that must be set when the interface is first installed).or an electronic memory such as an EPROM that can be downloded from the computer(what does this means). Most hardware needs to be configured only once- configuration is usually done when the hardware is first installed. Question:Suppose a network administrator configures the LAN interface hardware (assigns the address) when he installs it. Now later on if he needs to change the physical address of the device can he change it? Or in this addressing scheme the hardware can only be configured once and we can not reconfigure it later on.

  Read the article

• Enable user registration - eJabberd

  - by travega

  I am a complete n00b to configuring Jabber/XMPP servers and I am hoping to get some help getting set up. I have done all of this and installed pidgin. I seem to be able set up my "admin-user" in pidgin no problem but when I try to register a new user I get a 403 Fobidden message back from pidgin. Do I need to change the ejabberd.cfg file to allow users to register? If so how do I go about it? If not what do I need to get basic chat and fileshare going?

  Read the article

• APC File Cache not working but user cache is fine

  - by danishgoel

  I have just got a VPS (with cPanel/WHM) to test what gains i could get in my application with using apc file cache AND user cache. So firstly I got the PHP 5.3 compiled in as a DSO (apache module). Then installed APC via PECL through SSH. (First I tried with WHM Module installer, it also had the same problem, so I tried it via ssh) All seemed fine and phpinfo showed apc loaded and enabled. Then I checked with apc.php. All seemed OK But as I started testing my php application, the stats in apc for File Cache Information state: Cached Files 0 ( 0.0 Bytes) Hits 1 Misses 0 Request Rate (hits, misses) 0.00 cache requests/second Hit Rate 0.00 cache requests/second Miss Rate 0.00 cache requests/second Insert Rate 0.00 cache requests/second Cache full count 0 Which meant no PHP files were being cached, even though I had browsed through over 10 PHP files having multiple includes. So there must have been some Cached Files. But the user cache is functioning fine. User Cache Information Cached Variables 0 ( 0.0 Bytes) Hits 1000 Misses 1000 Request Rate (hits, misses) 0.84 cache requests/second Hit Rate 0.42 cache requests/second Miss Rate 0.42 cache requests/second Insert Rate 0.84 cache requests/second Cache full count 0 Its actually from an APC caching test script which tries to retrieve and store 1000 entries and gives me the times. A sort of simple benchmark. Can anyone help me here. Even though apc.cache_by_default = 1, no php files are being cached. This is my apc config Runtime Settings apc.cache_by_default 1 apc.canonicalize 1 apc.coredump_unmap 0 apc.enable_cli 0 apc.enabled 1 apc.file_md5 0 apc.file_update_protection 2 apc.filters apc.gc_ttl 3600 apc.include_once_override 0 apc.lazy_classes 0 apc.lazy_functions 0 apc.max_file_size 1M apc.mmap_file_mask apc.num_files_hint 1000 apc.preload_path apc.report_autofilter 0 apc.rfc1867 0 apc.rfc1867_freq 0 apc.rfc1867_name APC_UPLOAD_PROGRESS apc.rfc1867_prefix upload_ apc.rfc1867_ttl 3600 apc.serializer default apc.shm_segments 1 apc.shm_size 32M apc.slam_defense 1 apc.stat 1 apc.stat_ctime 0 apc.ttl 0 apc.use_request_time 1 apc.user_entries_hint 4096 apc.user_ttl 0 apc.write_lock 1 Also most php files are under 20KB, thus, apc.max_file_size = 1M is not the cause. I have also tried using 'apc_compile_file ' to force some files into opcode cache with no luck. I have also re-installed APC with Debugging enabled, but nothing shows in the error_log I have also tried setting mmap_file_mask to /dev/zero and /tmp/apc.xxxxxx, i have also set /tmp permissions to 777 to no avail Any clue anyone. Update: I have tried following things and none cause APC file cache to populate 1. set apc.enable_cli = 1 AND run a script from cli 2. Set apc.max_file_size = 5M (just in case) 3. switched php handler from dso to FastCGI in WHM (then switched it back to dso as it did not solve the problem) 4. Even tried restarting the container

  Read the article

• Launch Sublime Text 2 from command line

  - by Erick

  I am trying to launch Sublime Text 2 via command line. I know it has already been done before here but I am having different constraints. I use the portable version of ST and store it into my Dropbox account. I guess you can see me coming here. I need to launch subtext on a relative path. So far it "kinda works" if I type in the command line subl file.txt it works I see the file content but if I type subl "file 2.txt" I do not have nothing it opens ST with something like c:\mydir\"file 2.txt". I guess the problem lies on the "%WORKINGDIR%\%1" of the script bellow. @ECHO OFF SET WORKINGDIR=%CD% cd /d %0\.. SET EXECDIR=%CD% cd %WORKINGDIR% START "Sublime text editor" "%EXECDIR%\sublimetext\sublime_text.exe" "%WORKINGDIR%\%1"

  Read the article

• AWS Elastic load balancer doesn't decrease instances from Alarm Trigger

  - by jchysk

  I have a load balancer that I created an auto-scaling-group and launch-config for. I created the auto-scaling-group with a min-size of 1 and max size of 20. I have a scaledown policy: as-put-scaling-policy SBMScaleDownPolicy --auto-scaling-group SBMAutoScaleGroup --adjustment=-1 --type ChangeInCapacity --cooldown 300 Then I set up an alarm: mon-put-metric-alarm SBMLowCPUAlarm --comparison-operator LessThanThreshold --evaluation-periods 1 --metric-name CPUUtilization --namespace "AWS/EC2" --period 600 --statistic Average --threshold 35 --alarm-actions arn:aws:autoscaling:us-east-1:policystuffhere:autoScalingGroupName/SBMAutoScaleGroup:policyName/SBMScaleDownPolicy --dimensions "AutoScalingGroupName=SBMAutoScaleGroup" When average CPU usage over 10 minutes is under 35, in CloudFront the alarm shows up as "In Alarm State" but doesn't decrease the number of instances. Also, if there's only one instance running it'll spin up another to 2 even if a scale up alarm isn't hit. It seems like the default value is just set to 2 somehow. How can I change this?

  Read the article

• eAccelerator settings for PHP/Centos/Apache

  - by bobbyh

  I have eAccelerator installed on a server running Wordpress using PHP/Apache on CentOS. I am occassionally getting persistent "white pages", which presumably are PHP Fatal Errors (although these errors don't appear in my error_log). These "white pages" are sprinkled here and there throughout the site. They persist until I go to my eAccelerator control.php page and clear/clean/purge my caches, which suggests to me that I've configured eAccelerator improperly. Here are my current /etc/php.ini settings: memory_limit = 128M; eaccelerator.shm_size="64", where shm.size is "the amount of shared memory eAccelerator should allocate to cache PHP scripts" (see http://eaccelerator.net/wiki/Settings) eaccelerator.shm_max="0", where shm_max is "the maximum size a user can put in shared memory with functions like eaccelerator_put ... The default value is "0" which disables the limit" eaccelerator.shm_ttl="0" - "When eAccelerator doesn't have enough free shared memory to cache a new script it will remove all scripts from shared memory cache that haven't been accessed in at least shm_ttl seconds. By default this value is set to "0" which means that eAccelerator won't try to remove any old scripts from shared memory." eaccelerator.shm_prune_period="0" - "When eAccelerator doesn't have enough free shared memory to cache a script it tries to remove old scripts if the previous try was made more then "shm_prune_period" seconds ago. Default value is "0" which means that eAccelerator won't try to remove any old script from shared memory." eaccelerator.keys = "shm_only" - "These settings control the places eAccelerator may cache user content. ... 'shm_only' cache[s] data in shared memory" On my phpinfo page, it says: memory_limit 128M Version 0.9.5.3 and Caching Enabled true On my eAccelerator control.php page, it says 64 MB of total RAM available Memory usage 77.70% (49.73MB/ 64.00MB) 27.6 MB is used by cached scripts in the PHP opcode cache (I added up the file sizes myself) 22.1 MB is used by the cache keys, which is populated by the Wordpress object cache. My questions are: Is it true that there is only 36.4 MB of room in the eAccelerator cache for total "cache keys" (64 MB of total RAM minus whatever is taken by cached scripts, which is 27.6 MB at the moment)? What happens if my app tries to write more than 22.1 MB of cache keys to the eAccelerator memory cache? Does this cause eAccelerator to go crazy, like I've seen? If I change eaccelerator.shm_max to be equal to (say) 32 MB, would that avoid this problem? Do I also need to change shm_ttl and shm_prune_period to make eAccelerator respect the MB limit set by shm_max? Thanks! :-)

  Read the article

• Disable MathML output of eLyXer

  - by Gryllida

  eLyXer is a standalone LyX to HTML converter. In the resulting file, equations are formatted as MathML, and the file itself starts with an XML tag. This causes two problems: LibreOffice does not read the XML file (it can read HTML files, but not XHTML). I am unable to copy and paste the equations into a document editor such as LibreOffice with the goal of subsequent conversion into .doc, because .doc files do not support MathML. The eLyXer help page mentions an option to only use simple math, but there is no option to set math equations to output as images. And I already set Document Settings Output Math equations Format: images in LyX, which presumably is saved in the lyx document somewhere. A web search did not come up with any solutions.

  Read the article

• dhcrelay running as both DHCP and DHCPv6 relay agent on CentOS 6.2

  - by Tibor

  I am trying to set up a DHCP relay agent that would relay DHCP requests for both IPv4 and IPv6. I am using CentOS 6.2 and I am using the dhcrelay from the ISC DHCP implementation. I would like to set it up as a service, but the man page for dhcrelay states: -6 Run dhcrelay as a DHCPv6 relay agent. Incompatible with the -4 option. -4 Run dhcrelay as a DHCPv4/BOOTP relay agent. This is the default mode of operation, so the argu- ment is not necessary, but may be specified for clarity. Incompatible with -6. It seems that the -6 and -4 options are incompatible. How would I still make it work for both protocols without rolling my own service wrapper for both cases?

  Read the article

• Why can't windows see mmcblk0p3? [closed]

  - by jacknad

  The partition is created on the embedded linux target like this # n - new # p - partition # 3 - partition 3 # 66 - starting cylinder # <blank> - maximum size for the ending cylinder # t - set file system type # 3 - partition 3 # c - set to windows vfat # w - write partition table and exit echo -e "n\np\n3\n66\n\nt\n3\nc\nw" | fdisk /dev/mmcblk0 The file system is then formatted on the embedded linux target as MS-DOS like this # -n volume-name # -F FAT-size mkfs.vfat -n DB -F 32 /dev/mmcblk0p3 A linux host can mount and access files in mmcblk0p3 without issue. Why can't windows? Edit: Although the default number of FATS is 2 I tried adding -f 2 [number-of-FATs] since this is actually being done by busybox on an embedded platform but this didn't help. I understand the Linux MS-DOS file system does not support more than 2 FATs but there are only 2 on this target (the boot is also FAT which is visible), along with and EXT3 (on p2) for the root file system.

  Read the article

• Can connect to shared folder on Windows Server 2012, but access denied when accessing

  - by Cylindric

  I have a Windows Server 2012 (non-domain) with a folder that's shared out as TestShare. The share permissions are Everyone has full access, and there is a local user TestUser that has full access to the actual folder. On GuestServer I can connect and/or map a drive to \HostServer\TestShare, specifying the username and password for TestUser. NTFS permissions: Share permissions Effective Access Report The problem is that when I try to access the folder, I get an "access denied" message. On the host server I can see the user connected to the share in the Sessions manager, so the password is correct and being recognised. If I use an incorrect password I don't get the "completed successfully" message, nor the 'open session'. What else can be blocking access to the shared files, when the share seems to be set, and the folder permissions seem to be set, and the connection seems to be okay? The network is recognised as "public", and the relevant firewall rules seem to be enabled - even disabling the firewall doesn't help.

  Read the article

• Nobody nogroup on ubuntu client with Solaris server

  - by user1574623

  I have an openIdiana server with ZFS and it has been shared with NFS on a ubuntu server (called server1) one year ago. Now i am asked to shared it on a second ubuntu server (called server2). So i have took the line in /etc/fstab from server 1 and add it in server2: 192.168.1.22:mypool/data/.zfs/snapshot /mnt/zfs nfs acl,intr,noatime 0 0 But when i mount it, the rights on server2 are "nobody nogroup" (connect as anonymous?!) whereas its ok on server1. And on my OpenIndiana, I haven't found where it is configured (its not me who configured it last year). So I have tried to set zfs set sharenfs=rw numpool/data but without success. So i am looking for a file like /etc/exports on Ubuntu to configure which server is allowed to connect, and not as anonymous. Any idea? thanks,

  Read the article

• How do I open WPS files in Word Starter 2010?

  - by Sean

  Ok, this is driving me crazy. My parents have 100s of old WPS documents from an ancient version of MS Works, and they just bought a new computer with MS Word 2010 Starter on it. I ap trying to set it up so that the default program to open the WPS files is MS Word, but there is no EXE anywhere in program files or programfilesx86. I opened up process explorer and tried to figure out where the executable for Word is, and it turns out it is on the Q drive... the same Q drive that seems to be inaccessible no matter what I try. I tried adding the exact address of Word, but if I try and set that on anything, it says that it cannot find the file. This is driving me insane, is there any way to make it real easy to open these WPS files in Word?!?

  Read the article

• Apache doesn't autostart because vpn isn't up yet.

  - by Col. Shrapnel

  I have a FreeBSD8 server, and VPN connection to my ISP. I use mpd5 and it works fine. A have an Apache server whch works fine, if I start it manually, after VPN is get up. But when I add it to rc.conf autostart, it fail to start, saying (49) can't assign requested address: make_sock could not bind to address I suppose it's because VPN isn't up yet and no IP address assigned to the interface which i set in the Listen directive in the httpd.conf. If i set Listen to the existing 127.0.0.1, it fail to serve wan requests. Is there a solution, either to delay apache autostart or configure it some different?

  Read the article

• XKB - remap arrow keys and preserve shift behaviour to select text

  - by dgirardi

  I realize arrow key remapping is an old problem, however I cannot seem to find a good solution that lets me select text with SHIFT + remapped keys as I would do with the vanilla arrow keys. For instance, if I remap Caps Lock to ISO_Level3_Shift and set xkb_symbols to read either key <AC08> { [ k, K , Down, Down] }; or key <AC08> { type="THREE_LEVEL", [ k, K , Down ] }; Pressing Shift+CapsLock+K will behave exactly as CapsLock+K (while Shift+Down behaves differently from Down alone). I had somewhat more success using higher level macro utilities and generating keyboard events (i.e. generate both the shift and the arrow keypresses); hoever that approach has a whole set of different problems - often the UI response to a simulated keypress is different from the "real" keypress, and there are performance problems as well - I can type faster than the thing can handle. Tl;dr; how can you shift-select using remapped arrow keys under X?

  Read the article

• router propogation usng OSPF

  - by liv2hak

  I am using Juniper J-series routers to emulate a small telco and VPN customer.I need to use OSPF so that the path to each internal subnet is propogated to all PE nodes.The network topology is given below. To achieve this I am planning to run the following commands in UOW-TAU and UOW-HAM. set protocols ospf area 0.0.0.0 interface ge-0/0/0 set protocols ospf area 0.0.0.0 interface lo0.0 Do I need to do any additional configuration in TAU-PE1 and HAM-PE1 routers for it to receive the OSPF paths.? I am a beginner at the routing.Any help is appreciated.

  Read the article

• Tmux causes Emacs glitch

  - by killy9999

  Recently I started using Tmux, but I noticed that it causes a strange Emacs glitch. When I open source code for elisp or haskell, the comments aren't highlighted. Only the comment sign is (; in case of elisp, -- in case of haskell). The rest of the commented line is in normal colour. When I run Emacs outside of Tmux everything works as expected - the whole commented line is highlighted in a colour denoting a comment. Any ideas why this is happening? SOLUTION: Based on Stefan's comment I added this to my .emacs file: (custom-set-variables (custom-set-faces '(font-lock-comment-face ((((class color) (min-colors 8) (background dark)) (:foreground "red")))))) Now the comments are displayed in red, just like comment delimiters.

  Read the article

< Previous Page | 546 547 548 549 550 551 552 553 554 555 556 557  | Next Page >