Search Results

Search found 19597 results on 784 pages for 'last chance'.

Page 551/784 | < Previous Page | 547 548 549 550 551 552 553 554 555 556 557 558  | Next Page >

  • Wireless router blocking some sites while using ethernet is fine

    - by Micke
    I'm using Windows 7 and my router is a wireless Apple Airport Express that is approximately two years old. Suddenly I can't access some sites (for example www.sthlm.friskissvettis.se, or www.vegetarian-shoes.co.uk, some streamed tv-shows on svtplay.se, and a number of other random sites) when connecting to internet with my router. It worked good until recently and I'm fairly sure this problem emerged when my ISP upgraded from 10/10mbit to 100/10mbit speed. Most other sites like facebook and google works fine. When using my network cable to connect to internet everything works fine and I can access these sites. Firmware is current and I've tried reseting the router to factory defaults. Tried different browsers, and I can't ping the "blocked" sites either. Tracert www.sthlm.friskissvettis.se starts with 10.0.0.1 and continues through a number of long addresses until it says timeout. The last working address before timeout was sth-tcy-ipcore01-ge-0-2-0.neq.dgcsystems.net [83.241.252.13], if it matters. Tracert www.vegetarian-shoes.co.uk also eventually gives me a timeout. When the network cable is plugged in, I still get timeout on tracert www.sthlm.friskissvettis.se even though I can access the site in Chrome. Weird. www.vegetarian-shoes.co.uk doesn't give me a tracert timeout when the cable is plugged in, and I can access the site as usual. I've tried changing DNS servers to use opendns servers instead, but to no use. I've tried pinging these two sites with a lower MTU packet size (with this method: http://www.richard-slater.co.uk/archives/2009/10/23/change-your-mtu-under-vista-or-windows-7/), but still can't access them through ping... I don't know what to do anymore.... any suggestions???

    Read the article

  • Error during configuring kerberos5 using macports

    - by ario
    While trying to install libmemcached via MacPorts, I hit the following issue: libmemcached @0.40 +universal ---> Computing dependencies for libmemcached ---> Dependencies to be installed: cyrus-sasl2 kerberos5 ---> Configuring kerberos5 Error: org.macports.configure for port kerberos5 returned: configure failure: command execution failed Error: Failed to install kerberos5 It tells me to look in the log for details. Here's the last bit of the log file: :info:configure checking for setupterm in -lcurses... no :info:configure checking for setupterm in -lncurses... no :info:configure checking for tgetent... no :info:configure configure: error: Could not find tgetent; are you missing a curses/ncurses library? :info:configure configure: error: /bin/sh './configure' failed for appl/telnet :info:configure Command failed: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_kerberos5/kerberos5/work/krb5-1.7.2/src" && ./configure --prefix=/opt/local --disable-dependency-tracking --mandir=/opt/local/share/man :info:configure Exit code: 1 :error:configure org.macports.configure for port kerberos5 returned: configure failure: command execution failed :debug:configure Error code: NONE :debug:configure Backtrace: configure failure: command execution failed while executing "$procedure $targetname" :info:configure Warning: targets not executed for kerberos5: org.macports.activate org.macports.configure org.macports.build org.macports.destroot org.macports.install :error:configure Failed to install kerberos5 :debug:configure Registry error: kerberos5 not registered as installed & active. invoked from within "registry_active ${subport}" invoked from within "$workername eval registry_active \${subport}" :notice:configure Please see the log file for port kerberos5 for details: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_kerberos5/kerberos5/main.log It seems to say it's missing ncurses. Looks like it's there though, since if I run port installed I see these: ncurses @5.7_0 ncurses @5.9_1 (active) ncursesw @5.7_0 Any ideas on how to get around this error?

    Read the article

  • New keyboard for linux: Adesso Tru-Form or MS Natural Keyboard 4000?

    - by Andrea
    Hi folks! I'm going to buy a new ergonomic keyboard for my laptop. In the following, keep in mind I live in Italy. I considered the following models: Adesso PCK-308UB - Adesso Tru-Form™ Pro - Contoured Ergonomic Keyboard with TouchPad-PS2 Pro: has a built-in touchpad in the same position of my laptop somewhat cheaper than the alternative below Cons: the surface doesn't seem to be bowl-shaped. keys seem to lay on a straight slightly-inclined surface. It seems an idea used extensively in other ergonomic keyboards according to a few comments on the net, new Adesso keyboards seem to lack robustness, they're likely to loose small parts after a few weeks or months. Other users, instead, seem to never had any problem in years and swear by their quality and comfortability. Those who had problems, however, lamented a lack of responsiveness from the manufacturer. I'm not sure whether the keyboard, at least the standard keys, and the touchpad will both be recognized correctly under linux distros (I mostly use FC btw) last time I checked, Adesso didn't have local resellers in my country Microsoft Natural Ergonomic Keyboard Pro: recognized as one of the most comfortable keyboards reliable customer service operating in my country AFAIK there are several documented ways to get extra buttons work with linux Cons: it doesn't have a builtin touchpad and has a numeric keypad wasting space to reach mouse But there could be other keyboards I haven't considered yet, so here follows my ideal keyboard wishlist, ordered by priority linux compatible basic ergonomic design, which entails split tilted keyboard and pads advanced ergonomic design, like true-ergonomic's or kinesis , where special keys (like enter, caps-lock...) are placed symmetrically in the middle to be used by thumbs a builtin touchpad/trackball placed under the keyboard. I just love this on my notebook. I think it's pretty effective, since it allows my hand to rest naturally everytime I use it. Any opinion on this? high-quality switches, like cherry's (unsure about this one) additional programmable keys placed near usual ones, to simplify typing shortcuts TIA Andrea

    Read the article

  • Acer Aspire one is falling apart on Ubuntu

    - by Narcolapser
    Question: How do I have my netbook detect and install hardware? Info: I have an Acer Aspire One, it came with windows XP and I loaded it with Win7. I decided I wanted to change to Ubuntu so I tried Ubuntu netbook remix, which failed horribly, and so after attempting 3 or so other OS's I ended with Ubuntu Desktop 9.10. Which worked fine for a while, but there were some minor issues so I asked a question about it here and decided to change my OS again. This last weekend I tried mandriva like that guy in my other question suggested, no success. when I had though my netbook lost the ability to use it's touch pad, I didn't think much of it, just thought it must be a driver or something. But When Mandriva failed, and I also while I was at it tried Damn small linux and Debian, which both failed to, I decided to switch back to Ubuntu Desktop(some where in here my keyboard stopped working for one attempt to). But first I gave the netbook remix one more try. it worked this time, with the exception of it didn't have any networking. I thought it was a driver issue again and finished the weekend with ubuntu desktop 9.10 again. But now things get really crazy. it doesn't know it has a wireless card or an ethernet card. It doesn't know my phone is connected trying to provide wireless broadband either. I'm clueless on what could be the problem. And with only a minimal amount of experience with Ubuntu can't navigate the entire interface with only my keyboard(it doesn't detect a USB mouse when I plug it in, it had when I installed it. in fact the network interfaces were working just fine when I live boot ubuntu to installed it). Even so, I don't know where to go or what to do to make it recognize it's hardware. I'm in a dire situation, any help is welcome.

    Read the article

  • Mysql queries stuck in "sending data" state

    - by MarkPW
    I'm running a Litespeed web server and a database server (2 x Clovertown 5335) with MySQL 5.1.52-log (running on Cent OS 4.5 and 4.6 32bit respectively). Last week, I upgraded from 5.0.51a-community-log and since then I've been having a problem whereby my database server's load starts increasing for no apparent reason. Running SHOW PROCESSLIST; I see all of my SQL_CACHE queries that use a wildcard in WHERE, backing up and getting stuck in "sending data" state. However, other queries that use SQL_CACHE but no wildcard do not get caught up in this. To get things going again, the first time it happens (after about 24 hours), I have to restart mysql. 4/5 times it will re-occur after about 20 minutes or so and this time and for subsequent occurrences it is not necessary to restart mysql. Simply stopping the web server for a few minutes will suffice while I allow the stuck queries to clear themselves up. I had no such problem with the the previous mysql install. What could be causing the issue and how do I resolve it? Thanks

    Read the article

  • Fixing corrupt files or corrupt file table on a USB drive?

    - by Kelsey
    I was doing a virus scan on an external USB drive while copying data over to it. While AVG was scanning my system got locked up I think due to the USB drive running out of space and it required a reboot. Since that time all data on the external drive is no longer accessible. I can see all the files in the root and directories but I cannot browse into any of them as Windows 7 gives an error stating they are corrupt. I think the file table or whatever it uses to store the index of what exists on the drive has been corrupted since it still shows the the drive as being almost full but everything I do a properties check on says it is 0 bytes. Does anyone know how to 'unlock' or recover this data? Is there a way to rebuild the file table somehow? Luckily I can recover this data from other sources as a last resort but I would like to fix this if possible. Any help would be appreciated. Thanks.

    Read the article

  • How do I determine the cause of a sustained spike in mysql queries/activity?

    - by mattmcmanus
    So this is more of a "I'm trying to learn about how this works" question rather than "there is a serious problem I can't figure out!" question. I'm setting up a VPS and have been tweaking and changing things here and there. I recently installed munin (like two days ago) and yesterday I noticed a significant increase in mysql activity. So now my curiosity is going crazy. How do I setup/access mysql's query log? I have about 5 databases on the server so I want to see which one is getting all the action. Is there anything else I can do to keep a better eye on what's going on? Here are the graphs. As you can tell, it's not that much activity at all but I'm just curious at the change. The sites that are on the server right now do not get a lot of traffic. It's running a couple drupal sites, only one of which is live. The live one hasn't had a spike in traffic and the last spike was 250 visitors so it's barely a spike at all.

    Read the article

  • Prolific USB-to-Serial Comm Port significantly slower under Windows 7 comparing to Windows XP

    - by Dmitry S
    Not sure if this question should be asked here or on SuperUser but if we get an answer here it may be useful for others here I am using a Prolific USB-to-Serial adapter based on the Prolific chip to use with a device on serial port. I have the latest version of the driver installed: 1.3.0 (2010-7-15). When I use my device with this adapter on my main Windows 7 (32bit) system it takes 8-9 seconds to send a command through to the device. However, when I do the same thing on a different Windows XP system (an old laptop I borrowed for testing) it only takes 2-3 seconds. I have made sure that the port settings and other variables are the same between systems. I also tested on a third laptop (also running Windows 7) and again got a significant delay. So the question is if anyone else experienced the same problem and found a solution. I would like to avoid moving to an XP system for what I need to achieve so that's my last option. Thanks in advance.

    Read the article

  • How to create VirtualHost in Ubuntu 12.10

    - by Mifas
    I had followed many articles to 'How to create VirtualHost in Ubuntu'. This is what have I done Installed Apache sudo apt-get install lamp-server^ phpmyadmin I created folder called site1.com in /var/www/ Then I have created the file in /etc/apache2/sites-available/site1.com Then added the following code to that site1.com file <VirtualHost *:80> ServerName www.site1.com ServerAdmin [email protected] ServerAlias site1.com DocumentRoot /var/www/site1.com # Other directives here <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/site1.com/> Options Indexes FollowSymLinks MultiViews AllowOverride all Order allow,deny Allow from all </Directory> </VirtualHost> Then after that I edit the host file added the following line of code 127.0.0.1 site1.com Edit Also I enable the site1.com via sudo a2ensite site1.com Then i restart the apache serivice. (Even i restarted the pc) When I go to the site1.com, It will say The connection has timed out Error Message. But I can browse via localhost/site1.com. I have been trying since last two days. No solution. And followed many articles and videos.

    Read the article

  • Can't pop3 from exchange server after a reboot

    - by BLAKE
    Last night I shutdown my Exchange 2003 Virtual Machine, I added a new VHD (For backups), and booted it again. Now I can't POP3 email from it with Outlook 2007. In Outlook I get the error: Task '[email protected] - Receiving' reported error (0x800CCC0F) : 'The connection to the server was interrupted. If this problem continues, contact your server administrator or Internet service provider (ISP).' Does anybody know what is wrong? All I did was a reboot. I haven't formated the added disk. There are no weird errors in the event log. I can still send mail with Outlook over port 25. I can send and recieve mail with OWA. I can POP3 the mail to my phone (it take about 15 minutes after sending a message, but I do get it eventually). EDIT: The 'Microsoft Exchange POP3' Service says that it is started but if I stop it and try to start it again, it fails saying 'Could not start the Microsoft Exchange POP3 service on Local Computer. Error 1053: The service did not respond to the start or control request in a timely fashion.' I did some googling and someone on exchangefreaks.com said that if I use task manager to 'End Task' on inetinfo.exe, then I can start the POP3 service fine. Does anyone know what causes this problem? I am fine for now since I did get the Service started, but If it does this after every reboot...

    Read the article

  • Service Unavailable - App Pool disabled error...anyone know why?

    - by andy
    Hi guys A small number of our sites intermediately experience an error that is a mystery to us. Our set up is: Windows Server 2003 IIS6 .NET 3.5 We have about 35 Websites running on IIS Each site has it's own App Pool Each App Pool has the identity: Network Service The symptom is: The Application Pool for a site stops, and when you browse to the site, you only see: SERVICE UNAVAILABLE In the Event Logs, we have one Error, that looks like this: Application pool 'AppPool1' is being automatically disabled due to a series of failures in the process(es) serving that application pool. And we have several Warnings leading up to the error, that look like this (note: the warnings look the same, except for the process id): A process serving application pool 'AppPool1' suffered a fatal communication error with the World Wide Web Publishing Service. The process id was '292'. The data field contains the error number. What's causing this? As I said, it doeasn't happen very often....the last time was about 6 months ago...and it usually happens with the same site/App pool. Any ideas? cheers!

    Read the article

  • Data recovery on a corrupted 3TB disk

    - by Mark K Cowan
    Short version I probably need software to run a deep-scan recovery (ideally on Linux) to find files on NTFS filesystem. The file data is intact, but the references are no longer present. Analogous to recovering data from a "quick-formatted" partition. Hopefully there is a smarter way available than deep-scan, one which would recover filenames and possibly paths. Long version I have a 3TB disk containing a load of backups. Windows 7 SP1 refused to detect the disk when plugged in directly via SATA, so I put it on a USB/SATA adaptor which seemed to work at first. The SATA/USB adaptor probably does not support disks over 2.2TB though. Windows first asked me if I wanted to 'format' the disk, then later showed me most of the contents but some folder were inaccessible. I stupidly decided to run a CHKDSK on my backup disk, which made the folders accessible but also left them empty. I connected this disk via SATA to my main PC (Arch Linux). I tried: testdisk ntfsundelete ntfsfix --no-action (to look for diagnostically relevant faults, disk was "OK" though) to no avail as the files references in the tables had presumably been zeroed out by CHKDSK, rather than using a typical journal'd deletion). If it is useful at all, a majority of the files that I want to recover are JPEG, Photoshop PSD, and MPEG-3/MPEG-4/AVI/MKV files. If worst comes to worst, I'll just design my own sector scanner and use some simple heuristic-driven analysis to recover raw binary blocks of data from the disk which appears to match the structures of the above file types. I am unfamiliar with the exact workings of NTFS but used to be proficient at recovering FAT32 systems with just a hex-editor, so I can provide any useful diagnostic information if you let me know how to find it! My priorities in ascending order of importance for choosing the accepted answer: Restores directory structure Recovers many filenames in addition to the file data Is free / very cheap Runs on Linux Recovers a majority of file data The last point is the most important, but the more of the higher points you match the more rep you'll probably get :)

    Read the article

  • Kerberos service on win2k dc will not start following disk failure

    - by iwilson68
    Hi, I have a win2k (mixed mode domain) with 4 DCS. One of these also acts an exchange 2000 server which uses 2 logical volumes from an MSA 2000 array. AD etc is stored on local drives. We experienced a problem last week when the raid array fell back to a redundant controller and this temporarily meant that the two logical drives were not visible to the server for around 5 minutes and a couple of reboots. The log records these Events as Type: Warning Event Source: Disk Event Category: None Event ID: 51 Date: 06/11/2009 Time: 11:46:23 User: N/A Computer: server1 Description: An error was detected on device \Device\Harddisk1\DR1 during a paging operation. Following these problems, the server “kerberos Key Distribution” service refuses to start with an “error.31 a device attached to the system is not functioning”. All other automatic start services (including net logon) are running and there are no DNS issues etc. All devices are also functioning but the two logical MSA disks are now numbered in the Windows Disk Management MMC as 2 and 4 and I suspect that they may have previously been identified as disks 1 & 2 and perhaps windows still sees this as an ongoing failure?? Replication has not been affected but obviously there are many audit failures in the security log relating to users and workstations presumably linked to the Kerberos issue. Attempting to manually start the kerberos service generates the following in the System Log. Event Type: Error Event Source: Service Control Manager Event Category: None Event ID: 7023 Date: 09/11/2009 Time: 09:46:55 User: N/A Computer: Server1 Description: The Kerberos Key Distribution Center service terminated with the following error: A device attached to the system is not functioning. DCDIAG passes all tests except “Advertising” and “Services” which I believe relate directly to the failure of Kerberos only. Any advice would be appreciated.

    Read the article

  • "The zone can be scavenged after" keeps incrementing

    - by kce
    What are you trying to do? I'm trying to enable DNS scavenging on a DNS zone that has about a hundred stale DNS records. What have you tried in order to make it happen? I setup DNS Scavenging per everyone's favorite TechNet Blog post: Don't be afraid of DNS Scavenging. Just be patient. I first disabled scavenging on all of our domain controllers: DNSCmd . /ZoneResetScavengeServers contoso.com 192.168.1.1 192.168.1.2 I then enabled automatic scavenging on the DNS zone: I then enabled DNS scavenging on one of the domain controllers: I then found a few records that I expected to get delete with timstamps from a few years ago and ensured that that the Delete this record when it becomes stale and that time stamp was actually set: Finally I reloaded the zone and waited 14 days (the sum of the Refresh + No-Refresh periods). What results did you expect? I expected to see a 2501 Event in the DNS server logs noting the deletion of a bunch of DNS records. What actually happened? Nothing happened. The Zone Aging/Scavenging Properties showed that the zone could be scavenged after 6/12/2014 10:00:00 AM last week. No 2501/2502 events were recorded. All of the records with "aged" time stamps are still present. The date at which the zone can be scavenged after incremented another seven days to ?6/?18/?2014 10:00:00 AM. As I understand it until that date stays at least 14 days in the past nothing will ever even be eligible for scavenging let alone actually be scavenged. The only 2501 events recorded in the event logs are ones that I have triggered by right clicking and selecting "Scavenge Stale Resource Records". They note that scavenging will try to run again in 168 hours which was this morning. I have DNS scavenging enabled for a few months and have waited patiently for something to happen. I have reloaded the zone multiple times (which resets this timestamp). What am I missing here?

    Read the article

  • Apache (Solaris 10): 2 symlinks to the same file, one works the other doesn't

    - by justcatchingrye
    I'm seeing a strange issue with Apache I have a system that pulls a configuration file from a web server. I want to use a symlink with the name 'ocds-dpsarch01a.rules'. This doesn't work. However, if I change one character in that name and link it to the same file, it works - See below I can't think of any reason why one symlink would work when another doesn't? I would have thought either the Apache configuration is right and all symlinks work, or it isn't and no syslinks work(?) Any thoughts welcome ls -l /REMOVED/apache2/htdocs/rules/syslog/*cds-dpsarch01a.rules lrwxrwxrwx 1 root root 62 May 13 13:55 ocds-dpsarch01a.rules - /REMOVED/apache2/htdocs/templates/syslog/DCM_SST_DPST_01.rules lrwxrwxrwx 1 root root 62 May 13 13:52 xcds-dpsarch01a.rules - /REMOVED/apache2/htdocs/templates/syslog/DCM_SST_DPST_01.rules 1) Application starting and successfully reading configuration from the web server 13/05/2010 13:56:37: Information: Connecting ... 13/05/2010 13:56:37: Debug: Reading REMOVED:// REMOVED /rules/syslog/xcds-dpsarch01a.rules 13/05/2010 13:56:37: Debug: HTTP response: HTTP/1.1 200 OK Date: Thu, 13 May 2010 13:56:34 GMT Server: Apache Last-Modified: Fri, 09 Apr 2010 12:28:26 GMT ETag: "5073-a744-ee92ae80" Accept-Ranges: bytes Content-Length: 42820 Cache-Control: max-age=5 Expires: Thu, 13 May 2010 13:56:39 GMT NL7C-Filtered: Content-Type: text/plain Connection: close 13/05/2010 13:56:37: Debug: Plain text rules file detected. 2) Application starting and failing to read configuration from the web server 13/05/2010 13:56:55: Information: Connecting ... 13/05/2010 13:56:55: Debug: Reading REMOVED :// REMOVED /rules/syslog/ocds-dpsarch01a.rules 13/05/2010 13:56:55: Debug: HTTP response: HTTP/1.1 403 Forbidden Date: Wed, 12 May 2010 15:25:11 GMT Server: Apache Vary: accept-language,accept-charset Accept-Ranges: bytes Connection: close Content-Type: text/html; charset=iso-8859-1 Content-Language: en Expires: Wed, 12 May 2010 15:25:11 GMT 13/05/2010 13:56:55: Error: HTTP: HTTP/1.1 403 Forbidden Date: Wed, 12 May 2010 15:25:11 GMT Server: Apache Vary: accept-language,accept-charset Accept-Ranges: bytes Connection: close Content-Type: text/html; charset=iso-8859-1 Content-Language: en Expires: Wed, 12 May 2010 15:25:11 GMT 13/05/2010 13:56:55: Error: HTTP GET failed 13/05/2010 13:56:55: Error: Failed to open Rules file: REMOVED :// REMOVED /rules/syslog/ocds-dpsarch01a.rules

    Read the article

  • Windows 2008 Standard upgrade to Windows 2008 Enterprise failure

    - by Archit Baweja
    Sidestory, I was in the process of setting up a second Exchange 2010 server for DAG support, when I realized that my box needed Windows 2008 Enterprise edition. The box currently has Windows 2008 Standard Windows update including SP2 Exchange 2010 with CAS, HT, Mailbox roles Domain Services role File Services role. When I try to upgrade to Windows 2008 Enterprise, I initially got a "your current version of windows is more recent than the intallation media", something to that effect. My first guess was it may be SP2 related, so I uninstalled SP2, restarted and tried again. This time it gave me an error to the effect Windows could not configure one or more windows components. Please restart and try the update again. This was at the last stage of the Windows 2008 Enterprise install when it says "Completing installation". So I removed Domain Services role (including demoting it as a DC). However I get the same error again. Anyone see something like this before and have any suggestions? Also , is there a log file the windows upgrade program spits out that I can consult to see what component exactly is interfering? Update 1 Based on some googling I finally found the setup log file, and it seems that Windows setup had an issue determining the .Net 3.0 "feature" being installed or uninstalled. So based of of a win7/vista technet article I'm going to retry the upgrade after removing the .Net 3.0 feature.

    Read the article

  • Different nginx rules based on referrer

    - by juana
    I'm using WordPress with WP Super Cache. I want visitors who come from Google (That inlcudes all country specific referrers like google.co.in, google.co.uk and etc.) to see uncached contents. There are my nginx rules which are not working the way I want: server { server_name website.com; location / { root /var/www/html/website.com; index index.php; if ($http_referer ~* (www.google.com|www.google.co) ) { rewrite . /index.php break; } if (-f $request_filename) { break; } set $supercache_file ''; set $supercache_uri $request_uri; if ($request_method = POST) { set $supercache_uri ''; } if ($query_string) { set $supercache_uri ''; } if ($http_cookie ~* "comment_author_|wordpress|wp-postpass_" ) { set $supercache_uri ''; } if ($supercache_uri ~ ^(.+)$) { set $supercache_file /wp-content/cache/supercache/$http_host/$1index.html; } if (-f $document_root$supercache_file) { rewrite ^(.*)$ $supercache_file break; } if (!-e $request_filename) { rewrite . /index.php last; } } location ~ \.php$ { fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /var/www/html/website.com$fastcgi_script_name; include fastcgi_params; } } What should I do to achieve my goal?

    Read the article

  • Windows 7 Black Screen On Boot, Seperate Bootable VHD Works Fine

    - by David Osborn
    I have a Window 7 x64 install with a bootable VHD (also Windows 7 x64). I was having problems getting my homeserver to do backups (VSS erred) so I ran check disk and used a tool from MS (cleanc2r.exe) to remove an empty Q drive from the VHD that I believe was a result of installing Office 2010 Beta. (All of this was done on the bootable VHD, not the main install.) Now I can't boot into the main install. It gets past the Starting Windows screen and then goes black. I can still boot into the bootable VHD and everything works fine from there. I have tried to boot the main install in Safe Mode/Safe Mode with Networking/and Safe Mode command prompt and it has the same issue. I ran chkdsk /r on the main install and after doing all the work there was a message about correcting some free space that was marked as allocated and also that it was unable to make an entry into the event log. I tried the startup repair utility and it found no problems. I don't see the setting for restore to last know good configuration so I couldn't do that. I don't recall installing anything new to the main install nor having hooked up any new hardware recently.

    Read the article

  • What determines what resolutions a laptop is willing to output over VGA?

    - by Joshua McKinnon
    I'm responsible for several conference rooms and have setup 1080p projectors and I provide both HDMI and VGA connectivity. HDMI for DisplayPort and Mini-DisplayPort, and VGA as a fallback, universal option. Contrary to what I expected, people seem to have much more trouble with the HDMI than VGA, so VGA gets used a lot more than you'd think (even as most workstation laptops made in the last 3-4 years have DisplayPort or Mini-DisplayPort...). Also to my surprise, VGA outputs over 1080p on a 50ft cable run with very minimal degradation on certain laptops - other laptops just don't offer 1080p as a resolution choice and top out at 1600x1200 or something else. Specific example: a ThinkPad W530 will do 1080p, a W520 won't, over VGA. (both do 1080p over displayport/mini-DP) What determines what resolutions a laptop is willing to output over VGA? I'm thinking this will come down to either a video driver that says it supports only certain resolutions for output, or limitations of the RAMDAC (which wouldn't be in play, at least DAC wise, on a digital output, but WOULD on VGA, an analog output). The basic reason for the question is that I noticed, say, a ThinkPad W520 with 1080p built in display, will output 1080p fine over DisplayPort to a 1080p projector, but will cap out at 1600x1200 (practically the same pixel count, just a little shy) on VGA. Now, this wouldn't be surprising at all except SOME laptops have no issue outputting 1080p over VGA, even with lower native resolutions. Why do I care? Well if there's some way I could enable it... for situations where my users end up using VGA anyway, it's preferable for display mirroring if they can output their laptop's native resolution, which, you guessed it, is very often 1080p on 15" models. DISCLAIMER: This is primarily a curiosity, I'm not claiming 1080p over VGA is ideal by any means, but hey, if it works. I've seen HDMI start artifacting more over same-length, same gauge cabling (up to 50' run in certain rooms). If you think this is better suited to SuperUser, please move it, but this is framed from an IT standpoint of something that affects a real pool of users in a multiple conference room, 50+ deployed laptop scenario.

    Read the article

  • cisco 2900xl - SNMP - Get mac address of device connected to an interface

    - by ankit
    Hello all, Basically what i want to do is to find out what is the mac address of a device plugged in to an interface on the switch (FastEthernet0/1 for example) reading through the switch documentaion i found out that i can configure snmp trap on it to make it notify of any new mac address the switch detects by using the command snmp-server enable traps mac-notifiction but for some reason my switch does not support this feature. the only options i see are CORE_SWITCH(config)#snmp-server enable traps ? c2900 Enable SNMP c2900 traps cluster Enable Cluster traps config Enable SNMP config traps entity Enable SNMP entity traps hsrp Enable SNMP HSRP traps snmp Enable SNMP traps vlan-membership Enable VLAN Membership traps vtp Enable SNMP VTP traps <cr> so the other way would be for me to run a cronjon on my gateway to poll the switch periodically using snmp to get new mac addresses i have looked everywhere but cant seem to find the OID that would provide me this information. any help i can get would me very much appreciated ! here's the output from "show version" on my switch Cisco Internetwork Operating System Software IOS (tm) C2900XL Software (C2900XL-C3H2S-M), Version 12.0(5.4)WC(1), MAINTENANCE INTERIM SOFTWARE Copyright (c) 1986-2001 by cisco Systems, Inc. Compiled Tue 10-Jul-01 11:52 by devgoyal Image text-base: 0x00003000, data-base: 0x00333CD8 ROM: Bootstrap program is C2900XL boot loader CORE_SWITCH uptime is 1 hour, 24 minutes System returned to ROM by power-on System image file is "flash:c2900XL-c3h2s-mz.120-5.4.WC.1.bin" cisco WS-C2912-XL (PowerPC403GA) processor (revision 0x11) with 8192K/1024K bytes of memory. Processor board ID FAB0409X1WS, with hardware revision 0x01 Last reset from power-on Processor is running Enterprise Edition Software Cluster command switch capable Cluster member switch capable 12 FastEthernet/IEEE 802.3 interface(s) 32K bytes of flash-simulated non-volatile configuration memory. Base ethernet MAC Address: 00:01:42:D0:67:00 Motherboard assembly number: 73-3397-08 Power supply part number: 34-0834-01 Motherboard serial number: FAB040843G4 Power supply serial number: DAB05030HR8 Model revision number: A0 Motherboard revision number: C0 Model number: WS-C2912-XL-EN System serial number: FAB0409X1WS Configuration register is 0xF thanks, -ankit

    Read the article

  • Virtual (ESXi4) Win 2k8 R2 server hangs when adding role(s)

    - by Holocryptic
    I'm trying to provision a 2k8r2 Enterprise server in ESXi4. The OS installation goes fine, VMware tools, adding to domain, updates. All the basic stuff before you start adding Roles and Features. I've had this happen on two attempts already, and I'm not sure where the problem might be. I don't think it's hardware, because I have another 2k8r2 Standard server that's running fine. The only real difference is the install media. The server that's working was installed using a trial ISO and license. The one I'm having problems with is a full MAK installation. When I go to add a Role (the last case was Application Server) it gets all the way to "collecting installation results" before it hangs. CPU utilization in the vSphere client shows little spikes of activity with flatlines inbetween, but the whole console is locked up. The only way to release it is to power off and bring it back up. When you go to look at the added roles after bringing it back up, it shows that it is installed, but I don't trust that something didn't get wedged in all of that. The first install I did was with Thin Disk provisioning. The second attempt was with regular disk provisioning. In both cases 4GB of RAM, 2 vCPUs. VMware host is a HP Proliant DL380 G6, RAID-1 OS, RAID-5 data volume. 12 GB RAM. Has anyone else had this problem, or know where I should start poking around?

    Read the article

  • moving plone or recovering data

    - by Atilla Filiz
    I had a simple plone site running on my Ubuntu 8.10 box, setup by following instructions on https://help.ubuntu.com/community/forum/server/Plone Now the computer got an Ubuntu 9.04 install from scratch, and I want to get the site up and running. As far as I understand several python libraries from 9,04 are not compatible with plone. I tried installing plon3-site from ubuntu repos, and I got this: $bin/instance start Traceback (most recent call last): File "bin/instance", line 103, in ? import plone.recipe.zope2instance.ctl File "/media/Robocup2009/robocup2009/eggs/plone.recipe.zope2instance-2.7-py2.4.egg/plone/recipe/zope2instance/__init__.py", line 16, in ? import zc.buildout File "/media/Robocup2009/robocup2009/eggs/zc.recipe.egg-1.1.0-py2.4.egg/zc/__init__.py", line 1, in ? __import__('pkg_resources').declare_namespace(__name__) ImportError: No module named pkg_resources I have python-pkg-resources installed. I actually don't care about plone, I just found it easy to use. My site is just photo and video archive of several users, with low traffic but several gigabytes of data. What would you suggest? Is it easier to get plone working on my box and start my instance(how?), or recover the content from the instance folder(how?) and setup another content management system(which?)

    Read the article

  • Graphics and USB devices freezing soon after OS loads

    - by Andrew
    I run Ubuntu/Windows dual boot. Last night I started the upgrade to Ubuntu 12.04, and my computer has not worked since in either Windows or Ubuntu. Here's what I got when I rebooted after the upgrade, and continue to get every time I boot: Gets to GRUB screen OK. Choose Ubuntu - black screen or crazy purple lines. At first I assumed something went wrong with the upgrade (often happens). Choose Windows - works fine, I log in, but soon after that the graphics freeze (sometimes with purple artifacts). The keyboard and mouse (both USB) also lose power at the same instant, and none of the USB ports have power to them. This happens sooner or later every time I boot. Update: the HDD also appears to lose power at the same point. I have tried a live CD, but my computer refuses to boot any CD even after disabling all other boot options in the BIOS. I have disconnected everything except keyboard, mouse, graphics card with one monitor, one RAM sick and HDD; no change. I also took the little battery out to reset CMOS. I am pretty sure no matter how wrong the Ubuntu upgrade went, it wouldn't cause the above symptoms in Windows. So the only explanation I can think of is that a hardware failure occurred at the same time. Some possible causes of this I can think of are: A couple of days before this, I added a third screen (which worked fine). About a week before, my house lost power in a storm (no ill effects over the past few days though). What can I do, other than buy a new motherboard/CPU and hope it works? Unfortunately I don't have another box to swap parts into to test at the moment.

    Read the article

  • Intel Atom overheating in ASUS EEE Box 1501P

    - by Sergey L.
    I have had an ASUS EEE Box 1501P for just a little bit over a year. Of course it breaks 2 months after the warranty runs out. http://www.asus.com/Eee/EeeBox_PC/EeeBox_PC_EB1501P/ I have been using the box as a Home Media Center. Running mostly 24/7 often pausing a video overnight. Since last week the fan started running extremely loud. After some digging I found that the Intel Atom CPU in it is overheating and the built-in sensor is reporting temperatures way over 105°C. This got me worried, so I took the unit apart. Completely vacuumed the heat sink, oiled the fan, but the unit is still showing the same behaviour. After turning it on and just observing the hardware monitor in the BIOS the temperature slowly rises from 40°C to over 95°C in appx 5 min. I am running the newest BIOS and a lightweight Linux OPENELEC OS with XBMC on it. Now I am wondering if it could be a faulty heat sensor in the Atom. Recommended running temperature is up to 85°C, but I have not detected any performance hits when running at the above mentioned 105°C and there seem to be no software faults. How can an Atom with an attached heat sink and a fan running at full capacity even get this hot in the first place at 0 load? Aren't those things designed to generate virtually no heat? Could it be a faulty heat sensor? What shall I try to fix this? I would prefer not to damage the CPU, since it is hard fused into the motherboard and cannot be replaced. I could remove the heat pipe/heat sink, but it is getting hot, so heat is properly transferring from the CPU to the heat pipe, the fan is running at full capacity, is recently oiled and warm air is making it out of the exhaust. Edit: One more note: The North-bridge (or whatever it is called nowadays) is on the same heat pipe.

    Read the article

  • Global Address List, Multiple All Address Lists in CN=Address Lists Container

    - by Jonathan
    When my colleges (that was way before my time here) updated Exchange 2000 to 2003 a English All Address Lists appeared in addition to the German variant. The English All Address Lists have German titled GAL below it. This has just been a cosmetic problem for the last few years. Now as we are in the process of rolling out Exchange 2010 this causes some issues. Exchange 2010 picked the wrong i.e. English Address Lists Container to use. In ADSI Editor we see CN=All Address Lists,CN=Address Lists Container,CN=exchange org,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain and CN=Alle Adresslisten,CN=Address Lists Container,CN=exchange org,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain. In the addressBookRoots attribute of CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain both address lists were stored as values. We removed the English variant from addressBookRoots and restarted all (old and new) Exchange servers. User with mailboxes on the Exchange 2003 now only sees the German variant. Exchange 2010 is still stuck with the English/Mixed variant as are Users on Exchange 2010. Our goal would be to have Outlook display the German title of All Address Lists and get rid of the wrong Address Lists Container.

    Read the article

< Previous Page | 547 548 549 550 551 552 553 554 555 556 557 558  | Next Page >