Search Results

Search found 17314 results on 693 pages for 'vpn setup'.

Page 552/693 | < Previous Page | 548 549 550 551 552 553 554 555 556 557 558 559  | Next Page >

• Using public interfaces on a server connected through a GRE tunnel

  - by Evan

  I'm pretty new to networking so please forgive any terminology mistakes. I have 2 servers connected with a GRE tunnel. Server1 (10.0.0.1) ---- Server2 (10.0.0.2) I want to be able to bind to the public IPs on Server2 using Server1. To do this, I setup virtual interfaces with Server2's public IPs on Server1 and then used routing rules on Server1 to route the packets through the GRE tunnel. On Server1: ip rule add from [Server2's first public IP] table gre ip rule add from [Server2's second public IP] table gre ip route add default via 10.0.0.2 dev gre1 table gre This works great and I can see the packets arriving via GRE on Server2. I can see the packet exiting the tunnel on Server2's gre1 device as shown: From Server1: ping -I [Server2's public ip] google.com tcpdump from Server2's GRE tunnel device: 12:07:17.029160 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto ICMP (1), length 84) [Server2's public ip] > 74.125.225.38: ICMP echo request, id 6378, seq 50, length 64 This is exactly the packet I want. However, I'm not seeing it go out at all on eth0:0 (where Server2's public IP is bound to). I've tried to use routing rules to get packets coming from Server2's public IP (which would be coming out of dev gre1) to go through dev eth0 on the public default gateway and that doesn't work either. I'm at a loss, thank you to anyone who can help.

  Read the article

• Guest can't access host windows network share

  - by Asteroza

  HI folks, I've recently run into a strange problem after upgrading to VMware player 3. Certain virtual machines (currently an XP and a VIsta VM) seem to have lost the ability to access the host (XP) network shared folders (SMB). Both VM machines are bridged networking, firewall is up. Host firewall is up. Host and guests use DHCP. All OS are workgroup connected. The Vista VM I am not completely sure, but the XP VM did have access to the host's network shared folders after the player upgrade. Then today it wouldn't work, network path can't be found. Now here's the wierd part. The host's network shared folders can be accessed properly by other PC's on the network (and as far as I know, no settings have been changed). The host is pingable from the guests, and name resolution works. The guests can access network shares on other PC's in the network, and access the internet. My Network Places shows the host PC, but double clicking on it takes a long time before it finally times out with an error. Doing a wireshark packet capture, the guest is sending out the protocol negotiation, and the host is sending a response, but after that the guest behaves like it didn't receive anything and is doing TCP retransmissions. Anybody have any idea what could be wrong? Yes I know I can drag and drop files or setup the special VMware shared folders, but I want to access the host just like any other network accessible shared folder. It just seems really odd when any other computer works, just not between the guest and host.

  Read the article

• I think installing PostFix solved my problem, but it seemed *too* easy

  - by Joel Marcey

  Hi, This is a followup to a serverfault post I made a while ago: http://serverfault.com/questions/21633/how-do-i-target-a-different-mail-server-depending-on-domain-with-exim (More context here too: http://forum.slicehost.com/comments.php?DiscussionID=3806 ) I have a slice/VPS at Slicehost. I basically decided to scrap exim (i.e., purge it), and start anew with my email infrastructure. In case you didn't read any of the above threads, basically my goal was to have a send only mail infrastructure that relays all outgoing email to Google Apps. I also wanted to where email from domain1 (a Wordpress installation) would show it coming from domain1.com and email from domain2 (a normal website) would show it coming from domain2.com. So I decided to give PostFix a try. I literally followed the surprisingly simple instructions here: http://sudhanshuraheja.com/2009/02/slicehost-setup-outgoing-mail-google-apps-postfix/ And voila, all seems to be working as I expected. My email tests show email coming from the proper locations (either domain1 or domain2 depending on where the emails were sent from). But this all seemed too simple to me. So simple, in fact, that I feel that something is amiss. When I installed PostFix according to the instructions in the post above and it worked, I was surprised that I didn't have to specify an SMTP server, a port number, any authentication credentials, etc. My slice is set up such that I have MX records for Google Apps (e.g., ASPMX.L.GOOGLE.COM.) in my DNS settings, but I am not sure if that is why it is working. My email infrastructure knowledge is admittedly limited, but with this am I suspect to: Spammers using my email infrastructure? My emails going to people as spam? Something else sinister? I have actually stopped running PostFix until I understand this better. Thanks!

  Read the article

• slicehost google apps mx settings

  - by Bob

  Hello All, I am banging my head against the wall on this one. I followed the MX setup tutorials for Google Mail and it didn't work. Currently, after deleting those records and adding the ones google suggested I have domain.com. 86400 IN MX 10 ASPMX.L.GOOGLE.com. domain.com. 86400 IN MX 20 ALT2.ASPMX.L.GOOGLE.com. domain.com. 86400 IN MX 20 ALT1.ASPMX.L.GOOGLE.com. domain.com. 86400 IN MX 30 ASPMX2.GOOGLEMAIL.com. domain.com. 86400 IN MX 30 ASPMX5.GOOGLEMAIL.com. domain.com. 86400 IN MX 30 ASPMX3.GOOGLEMAIL.com. domain.com. 86400 IN MX 30 ASPMX4.GOOGLEMAIL.com. according to the output of my dig command for my particular "domain". I can send email from google apps mail but I can not recieve any email. It gives me the following error: Technical details of permanent failure: Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 550 550 #5.1.0 Address rejected [email protected] Now I already tried following the slicehost MX article instructions straight as well and they did not work out for me. The domain has already been verified by google and it says the email is activated from their end. Any help would be appreciated : )

  Read the article

• On what should i not be pennywise buying a machine for SqlServer 2008?

  - by Michel

  Hi, i'm going to do a project for a client and i'll be hosting the database server myself. Normally it would be on my dev machine, but there will also be data pushed into it during developing and testing, so i would like to setup a dedicated test sql server. But, as you might guess, i can't afford to go to Dell and buy one mega 16 core 16 GIG 10 TB raid 5 machine (wow, that sounds cool) So i have to save the money somewhere... the hardware only has to live for a year (longer is nice of course), and the sql server won't be hit too hard: i guess the average server will only see it as a cough once in a while. But i do want the machine to be a bit performant: if it does get some data, it must be a bit responsive. So my question is were can i leave out the expensive parts: is 2 GB enough, or must i take 4GB, is an average processor enough or should it be a top of the bill? Is Sql server a large resource user or is a simple desktop pc good enough? It wil run on win2008 by the way.

  Read the article

• Facing application redirection issue on nginx+tomcat

  - by Sunny Thakur

  I am facing a strange issue on application which is deployed on tomcat and nginx is using in front of tomcat to access the application from browser. The issue is, i deployed the application on tomcat and now setup the virtual host on nginx under conf.d directory [File i created is virtual.conf] and below is the content i am using for the same. server { listen 81; server_name domain.com; error_log /var/log/nginx/domain-admin-error.log; location / { proxy_pass http://localhost:100; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; } error_page 500 502 503 504 /50x.html; location = /50x.html { root html; } Now the issue is this when i am using rewrite ^(.*) http://$server_name$1 permanent; in server section and access the URL then this redirects to https://domain.com and i am able to log in to app and able to access the links also [I am not using ssl redirection in this host file and i don't know why this is happening] Now when i removed this from server section then i am able to access the application from :81 and able to logged into the application but when i click on any link in app this redirect me to the login page. I am not getting any logs in application logs as well as tomcat logs. Please help on this if this is a redirection issue of nginx. Thanks, Sunny

  Read the article

• Help setting up an secondary authoritative DNS server.

  - by GLB03

  We have three Authoritative DNS servers and three recursive/caching DNS servers on my campus. Authoritative servers DNS1- Windows 2003 DNS2- Old Red Hat ----- Replacing w/ newer version DNS3- Windows 2008 (I installed) Caching and Recursive resolvers servers Server1- Windows 2003 Server2- CentOS 5.2 (I installed) Server3- CentOS 5.3 (I installed) I am replacing DNS2 with a newer Red Hat version, but have no documentation on how it was implemented. I have setup caching and windows authoritative servers, but not a linux secondary authoritative server. I have a perl script from the original server that pulls data from our DNS1 server. We use DJBDNS and TinyDNS on our linux servers. Our Network Engineer says the DNS2 server I am replacing is an authoritative server that doesn't need to be caching, but the only instructions I see is for an Authoritative server that does caching as well. Can someone point me in the right directions. I thought I was on the right track with using these instructions but when I query my new dns server I get "No response from server", I have temporarily disabled iptables to eliminate it from being an issue. ps -aux | grep dns avahi 3493 0.0 0.2 2600 1272 ? Ss Apr24 0:05 avahi-daemon: running [newdns2.local] root 5254 0.0 0.1 3920 680 pts/0 R+ 09:56 0:00 grep dns root 6451 0.0 0.0 1528 308 ? S Apr29 0:00 supervise tinydns dnslog 6454 0.0 0.0 1540 308 ? S Apr29 0:00 multilog t ./main tinydns 9269 0.0 0.0 1652 308 ? S Apr29 0:00 /usr/local/bin/tinydns

  Read the article

• Home Server: cpu virtualisation, what to choose?

  - by Huygens

  I'm looking for virtualisation solutions for storage and OS for a home server. A sort of private cloud where I manage the storage space independently of the VM one. This question focus on VM (or compute instance) management and what would best suit my needs. (I have another question related to the storage management). My use cases are: A backup server: rsync and other services running. A personal cloud server: a kind of owned dropbox system, à la ownCloud. " users foreseen. A media server: streaming videos and displaying photos. Here my environement and wishes: Server: HP Proliant MicroServer with 8 GB RAM (AMD Turion dual core with AMD-V technology) OS types: only Linux (perhaps a *BSD VM in the future) Linux distributions do not matter, I'm familiar with RHEL, Fedora, Suse, Ubuntu, but any other recommandation will be fine 2-3 VMs foreseen: backup server, owncloud server and media server (optional). Those are only servers, so no graphical console needed (I don't need VirtualBox) By VM I mean a virtualised environment like KVM, Xen, etc. or a compute instance like with OpenStack storage should be "virtualised/cloudified" see my other question. VM should be able to be migrated to another server in the future if performance cannot be fullfilled anymore by the current server It does not matter if installation of such setup is complicated as long as management tools allow for easy maintenance I don't have Windows at home, so solution should be Linux friendly and would be nice to be web based. But native apps are OK too. System should be easy to enhance: by adding a new server to migate some of the VMs to it. So it's really a kind of private cloud on which I could run some Linux OS. I would prefer free (libre, as in a free speach) and open source tools. But it does not have to be free as in a free beer. So Xen, KVM, VitualBox or OpenStack? What would you recommend?

  Read the article

• Outlook won't re-connect to exchange after network is re-connected

  - by stan503

  I have a setup at my desk where I connect my computer to a an RJ45 switch that switches between two networks. One network is the corporate network, which is maintained by my company's IT, and the other is my own private network where I do testing (the two networks have to be separated). The corporate network hosts the exchange server where I get e-mail. When I switch from the private network to the corporate network, I expect Outlook to re-connect to the exchange server. However, I have found that sometimes when I come back, Outlook take an extremely long time to re-connect. Send/Receive will give me back the error 'The server is not available' (0x8004011D). It will sit there for 10 minutes to a few hours before it finally re-connects. The only other option is to reboot my computer, which is a huge pain for me since I run multiple VMs on it. This usually happens when I'm connected to the private network for a significant amount of time, so I'm thinking it's because Outlook has cached the network status. Is there a way to force Outlook to do a 'hard' re-connect to the exchange server? I'm using Windows XP SP 3 with Outlook 2007.

  Read the article

• MySQL Config on Large Machine

  - by Jonathon

  We have a Windows 2003 Enterprise Edition server (64bit) running only MySQL 5.1.45 64-bit. It has 16G RAM and 10T of hard-drive space in RAID 10. We are having horrible performance from mysqld (85-100% CPU utilization). We were running a smaller machine with better performance, so I am assuming our my.ini file is not correct for our current machine. The my.ini file is as follows: [client] port=3306 [mysql] default-character-set=latin1 [mysqld] port=3306 basedir="D:/MySQL/" datadir="D:/MySQL/data" default-character-set=latin1 default-storage-engine=MYISAM sql-mode="" skip-innodb skip-locking max_allowed_packet = 1M max_connections=800 myisam_max_sort_file_size=5G myisam_sort_buffer_size=500M table_open_cache = 512 table_cache=8000 tmp_table_size=30M query_cache_size=50M thread_cache_size=128 key_buffer_size=3072M read_buffer_size=2M read_rnd_buffer_size=16M sort_buffer_size=2M #replication settings (this is the master) log-bin=log server-id = 1 Does anyone see anything wrong with this setup? For a machine with this much RAM, why in the world would mysqld eat up so much CPU? I know we can optimize some queries, etc., but it did run okay on a smaller machine, so I am pretty sure it is the config. Thanks in advance for any help.

  Read the article

• What are the biggest, best CPUs that support Physical Address Extension?

  - by Giffyguy

  I'm looking for a CPU that will support PAE and fit into an LGA775 socket. This combination of technology is very much preferred for my current server hardware/software setup. My priorities in order of highest to lowest: PAE & LGA775 At least 1066Mhz FSB Largest CPU cache possible Multiple Cores if possible HyperThreading if possible Most other factors are of little-to-no consequence. I'm finding it very difficult to figure out what my options are. Intel doesn't have much useful information on PAE (since x64 is so dominant), and Wikipedia simply says that "PAE is provided by Intel Pentium Pro (and above) CPUs - including all later Pentium-series processors except the 400 MHz bus versions of the Pentium M." All of Intel's listed Pentium CPU's support Intel64, which makes me seriously doubt they will support PAE with a 32-bit OS. And Wikipedia's claim is so vague, I have no idea if they mean up-to-and-including the x64 Prescott CPUs. PAE is supposed to be an aspect of the x86 architecture, and I believe it is no longer supported in an x64 environment. Please correct me if I am wrong.

  Read the article

• Hyper-V VM Lab + RRAS + RDP

  - by Dennis Evans

  My background is primarily .NET Development with some System Administration skills. I'm trying to set up a VM Lab for me to test System Applications I'm developing but I've only ever done System Administration in already set up environments; I've never set up my own. My current setup: Server 2008 R2 Hyper-V Host on physical machine (only role enabled) with two NICs. First NIC dedicated for Management w/ DHCP address from company's network. Second NIC dedicated to RRAS VM w/ DHCP address from company's network. RRAS VM has two NICS, one is virtual private internal only NIC w/ static entry. The other is the physical NIC mentioned above. I've joined it to my VMLab.net internal domain. My Active Directory Domain Controller server (ADCT) also runs DNS, DHCP, and Certificate Services which I'm familiar with but don't understand completely. RRAS is already set up with NAT to provide the private internal network with Internet access. What I would like to do is be able to RDP into the servers/computers on the VMLab.net domain from my computer. Do I need to add the Remote Desktop Services role and enable the Remote Desktop Gateway service on RRAS in order to do this or is there a way to set up port forwarding on RRAS to just allow a direct connection to the internal servers...or both? What would the best practices be here? Network Diagram http://i.stack.imgur.com/4qfnk.png

  Read the article

• ZFS with L2ARC (SSD) slower for random seeks than without L2ARC

  - by Florian Kruse

  I am currently testing ZFS (Opensolaris 2009.06) in an older fileserver to evaluate its use for our needs. Our current setup is as follows: Dual core (2,4 GHz) with 4 GB RAM 3x SATA controller with 11 HDDs (250 GB) and one SSD (OCZ Vertex 2 100 GB) We want to evaluate the use of a L2ARC, so the current ZPOOL is: $ zpool status pool: tank state: ONLINE scrub: none requested config: NAME STATE READ WRITE CKSUM afstank ONLINE 0 0 0 raidz1 ONLINE 0 0 0 c11t0d0 ONLINE 0 0 0 c11t1d0 ONLINE 0 0 0 c11t2d0 ONLINE 0 0 0 c11t3d0 ONLINE 0 0 0 raidz1 ONLINE 0 0 0 c13t0d0 ONLINE 0 0 0 c13t1d0 ONLINE 0 0 0 c13t2d0 ONLINE 0 0 0 c13t3d0 ONLINE 0 0 0 cache c14t3d0 ONLINE 0 0 0 where c14t3d0 is the SSD (of course). We run IO tests with bonnie++ 1.03d, size is set to 200 GB (-s 200g) so that the test sample will never be completely in ARC/L2ARC. The results without SSD are (average values over several runs which show no differences) write_chr write_blk rewrite read_chr read_blk random seeks 101.998 kB/s 214.258 kB/s 96.673 kB/s 77.702 kB/s 254.695 kB/s 900 /s With SSD it becomes interesting. My assumption was that the results should be in worst case at least the same. While write/read/rewrite rates are not different, the random seek rate differs significantly between individual bonnie++ runs (between 188 /s and 1333 /s so far), average is 548 +- 200 /s, so below the value w/o SSD. So, my questions are mainly: Why do the random seek rates differ so much? If the seeks are really random, they should not differ much (my assumption). So, even if the SSD is impairing the performance it should be the same in each bonnie++ run. Why is the random seek performance worse in most of the bonnie++ runs? I would assume that some part of the bonnie++ data is in the L2ARC and random seeks on this data performs better while random seeks on other data just performs similarly like before.

  Read the article

• Possible to host CentOS netinstall files on a local HTTP/FTP?

  - by garlicman

  I'm running XenServer on an Dell R610 and am running into a catch-22. During install from DVD, CentOS can't find the DVD package catalogue. It's a reported error for some, XenServer + CentOS6 + DVD install in some hardware configurations = failed install. Yes, I checked the MD5 and let the disc test pass. In every reported case, the netinstall was the solution. The issue is my net access is required to go through a web proxy that prompts before you can download a file. This naturally breaks any download automation. I've been waiting on our IT to put in an exception rule to allow my lab to bypass the prompt, but it's been over 3 weeks now and they don't seem responsive. (I've been working on this a day or two a week) I want to try and host the netinstall files local in my Xen network. Right now I only have a bunch of Windows based VMs, CentOS won't install so I don't have any Linux tools. I had tried simply hosting all the DVD contents off one of the Windows servers using Mongoose. (I didn't want to setup IIS) I copied them to a hosted sub-directory similar to all the mirrors out there (e.g. http:///centos/6.2/os/i386/) with no auth or anything. Then in the netinstall I correctly pointed to it. I now realize just copying the DVD files over won't work. The repodata will point to a local device, not the site I'm hosting. (e.g. the DVD repodata includes xml that points to where the packages are) Clearly I'm hosting them over HTTP, not from a DVD. Is there an easy way to sort this out? I'm just trying to install CentOS6 on Xen. If there's a turnkey downloadable Xen image with CentOS 6.2 on it, or a downloadable repo image, I'll take that too! Thank you in advance!

  Read the article

• How can I disable DNSSC for Google Apps (GMail) MX records on my authoritative domains?

  - by meinemitternacht

  I'm running a BIND Master / Slave setup with DNSSEC, but some of my domains use Google Apps for e-mail services. Google doesn't support DNSSEC and BIND doesn't like it at all. Log output: Sep 6 17:12:51 srv549 named[5376]: error (broken trust chain) resolving 'ALT2.ASPMX.L.GOOGLE.COM.dlv.isc.org/DLV/IN': 70.32.45.42#53 Sep 6 17:12:51 srv549 named[5376]: error (broken trust chain) resolving 'ALT2.ASPMX.L.GOOGLE.COM/A/IN': 70.32.45.42#53 Sep 6 17:12:51 srv549 named[5376]: error (broken trust chain) resolving 'ALT2.ASPMX.L.GOOGLE.COM/AAAA/IN': 70.32.45.42#53 Sep 6 17:12:51 srv549 named[5376]: validating @0x7f755cb83950: ALT2.ASPMX.L.GOOGLE.COM AAAA: bad cache hit (ALT2.ASPMX.L.GOOGLE.COM.dlv.isc.org/DLV) Sep 6 17:12:51 srv549 named[5376]: error (broken trust chain) resolving 'ALT2.ASPMX.L.GOOGLE.COM/AAAA/IN': 69.147.224.178#53 Sep 6 17:12:51 srv549 named[5376]: validating @0x7f755ca52c30: ALT2.ASPMX.L.GOOGLE.COM A: bad cache hit (ALT2.ASPMX.L.GOOGLE.COM.dlv.isc.org/DLV) Sep 6 17:12:51 srv549 named[5376]: error (broken trust chain) resolving 'ALT2.ASPMX.L.GOOGLE.COM/A/IN': 69.147.224.178#53 Sep 6 17:12:51 srv549 named[5376]: validating @0x7f755ca52c30: ASPMX2.GOOGLEMAIL.COM AAAA: bad cache hit (ASPMX2.GOOGLEMAIL.COM.dlv.isc.org/DLV) Sep 6 17:12:51 srv549 named[5376]: error (broken trust chain) resolving 'ASPMX2.GOOGLEMAIL.COM/AAAA/IN': 70.32.45.42#53 Sep 6 17:12:51 srv549 named[5376]: validating @0x7f755cb83950: ASPMX2.GOOGLEMAIL.COM A: bad cache hit (ASPMX2.GOOGLEMAIL.COM.dlv.isc.org/DLV) Sep 6 17:12:51 srv549 named[5376]: error (broken trust chain) resolving 'ASPMX2.GOOGLEMAIL.COM/A/IN': 70.32.45.42#53 Sep 6 17:12:51 srv549 named[5376]: validating @0x7f754c1b0bd0: ASPMX2.GOOGLEMAIL.COM A: bad cache hit (ASPMX2.GOOGLEMAIL.COM.dlv.isc.org/DLV) Sep 6 17:12:51 srv549 named[5376]: error (broken trust chain) resolving 'ASPMX2.GOOGLEMAIL.COM/A/IN': 70.32.45.42#53 Sep 6 17:12:51 srv549 named[5376]: validating @0x7f754c1a6a30: ASPMX2.GOOGLEMAIL.COM AAAA: bad cache hit (ASPMX2.GOOGLEMAIL.COM.dlv.isc.org/DLV) Sep 6 17:12:51 srv549 named[5376]: error (broken trust chain) resolving 'ASPMX2.GOOGLEMAIL.COM/AAAA/IN': 70.32.45.42#53 Sep 6 17:12:51 srv549 named[5376]: validating @0x7f755cb83950: ASPMX3.GOOGLEMAIL.COM AAAA: bad cache hit (ASPMX3.GOOGLEMAIL.COM.dlv.isc.org/DLV) I'm not absolutely sure this is stopping Google Apps from working, because I just enabled all of the DNSSEC features. Does anyone here have experience with this?

  Read the article

• Mindtouch broke my Apache2 virtual host configuration.

  - by grenade

  I installed mindtouch using the instructions here and it seems to have broken my Virtual Host configuration. I have several domains running off the same apache instance and this was working fine but now all my domain names resolve to the virtualhost where mindtouch was installed. So mindtouch made all my domain names point to the new mindtouch instance. Grrr! I use debians default virtual host mechanisms (sites-enabled, etc). Does anyone know what apache directive mindtouch is using to ruin my vh setup? I've scoured all the conf files and there is nothing obvious in apache2.conf or httpd.conf that would cause the behaviour. Did it create a sym-link somewhere that I should destroy? I should add that I uninstalled the mindtouch packages already but apache persists in redirecting all domains to the first one mentioned in the sites-enabled folder. thini:~# apache2ctl -S [Wed Jan 05 13:39:11 2011] [warn] NameVirtualHost *:80 has no VirtualHosts VirtualHost configuration: wildcard NameVirtualHosts and _default_ servers: *:* www.openancestry.org (/etc/apache2/sites-enabled/openancestry.org:1) *:* www.pragmantra.com (/etc/apache2/sites-enabled/pragmantra.com:1) *:* services.pragmantra.com (/etc/apache2/sites-enabled/services.pragmantra.com:1) *:* www.subversionreports.com (/etc/apache2/sites-enabled/subversionreports.com:1) *:* www.thijssen.ch (/etc/apache2/sites-enabled/thijssen.ch:1) Syntax OK

  Read the article

• Deploying Windows Service through group policy fails with Event ID 102

  - by Sören Kuklau

  I'm trying to deploy a custom Windows Service (written in C#; installed through a VS setup project) using a group policy. To help debug this, I also have two additional MSIs in the same policy. All three packages are deployed as a machine policy, not a user one. On one machine (runs Windows Server 2008; no UAC), all three deploy fine. The service is set to Automatic, as expected. On two machines (run Windows 7; UAC), the two other MSIs deploy fine, but my service fails to install. The event log gives an event ID of 102, which appears to be a permissions problem: The install of application "Package Name" from policy "Policy Name" failed. The error was The installation source for this product is not available. Verify that the source exists and that you can access it. However, all three packages come from the same share linked through UNC, so this is unlikely. My guess is that UAC is the problem; that the service requires additional permissions. Do I need to alter the MSI somehow?

  Read the article

• install latest gcc as a non-privileged user

  - by voth

  I want to compile a program on a cluster (as a non-privileged user), which requires gcc-4.6, but the cluster has only gcc-4.1.2. I don't want to tell the administrator to update gcc, because 1) he is busy and would do it only after several days. 2) He probably wouldn't update it anyway, since other users may need the older gcc version (gcc is not backward compatible) I tried to compile gcc from source, which seems more difficult that it sounds, since it requires several other packages to be installed (GMP, MPFR, MPC, ...), and when I did it, after several hours I got a message like checking for __gmpz_init in -lgmp... no configure: error: libgmp not found or uses a different ABI (including static vs shared). at which point a got stuck. My question is: what is the easiest way to install the latest version of gcc as a non-privileged user? (something like apt-get install XXXXX, with an option to not install as root for example) The setup of the cluster is the following: CentOS release 5.4 (Final) Rocks release 5.3 (Rolled Tacos) If there are no other options than compiling from source, do you have any ideas how to handle the above error?

  Read the article

• Network Load Balancing, intermittent port problem on Windows Server 2008

  - by Jimmy Chandra

  Trying to troubleshoot an intermittent problem on a Windows Server 2008 NLB. I think it might be related to an NLB issue. We are using Windows Network Load Balancing to balance load for our multiserver SharePoint front ends. Say... Web Front End 1 IP is 192.168.1.100 and Web Front End 2 IP is 192.168.1.101, the NLB is setup to load balance both WFE servers on any incoming traffic to the IP 192.168.1.200. Sometimes we got an intermittent issue where when we try to access the SharePoint site using 192.168.1.200:8080 (say the site is set up to run on port 8080) from a remote client, it will display page not found. Pinging the 192.168.1.200 will give responses, but when trying to telnet to 192.168.1.200:8080 it just won't connect. However, browsing the SharePoint site directly on individual WFE (192.168.1.100 and 192.168.1.101) show no problem whatsoever. My guess also (we didn't get a chance to try it yet, but I think it should work), if I try connecting remotely to individual server, it will respond just fine. But any attempt on trying to connect using the virtual IP (192.168.1.200) will fail miserably. Funny thing is, after a while it will return back to normal. Anyone had similar experience with this type of problem while implementing NLB before? We are doing this in a virtual environment.

  Read the article

• How to configure networking on an appliance such that it can plug and play on any corporate network?

  - by Joshua Lim

  I had a chance to configure a Moxa NPort device server appliance on my client's network, it was very easy to do so, done in just 2 minutes. Here's what I did:- The Moxa device server had a preset IP address of 192.168.127.254 and subnet mask 255.255.255.0 - http://www.moxa.com/doc/manual/nport/5400/NPort_5400_Series_Users_Manual_v4.pdf Moxa provides a Windows software which I used to "scan" for the device server. It worked like magic! The software returns a list of device servers found. Each device server is identified by MAC address, and by selecting the device server using the software, I can reset the default IP address and subnet mask of that device server! In comparison, during an earlier project, I spent 2 hours trying to get KVM to work for a Windows 7 embedded appliance I'm trying to install in my client's network - http://superuser.com/questions/380305/how-to-configure-windows-7-professional-appliance-pc-on-my-clients-network-usin Prior to that, I have already tried pre-configuring the IP address and subnet mask to the one which my client provided, yet the appliance still can't connect to the client's network! I've also tried cross cable, didn't work either. After KVM worked, I discovered that the network settings were "lost" after I plug the machine into the client's network. Now my question is what can I do to setup my Windows 7 embedded appliance so that it can connect to any network like that the Moxa device server? I tried experimenting this on my network using a Windows machine configured to an IP address of 192.168.127.254 and subnet mask 255.255.255.0, but it doesn't connect to my network that uses 192.168.0.*. :( EDIT: I would like to point out that the Moxa Windows configuration software seems to be able to connect to any Moxa device connected to the network even if it is on a different subnet, as long as the network adapter shows "connected". This is important because the Moxa device has no VGSM port or interface to configure the IP address.

  Read the article

• Have it fixed or buy a new one?

  - by Workshop Alex

  My dual-monitor system has just become a single-monitor system again when the older monitor decided it would be nice to just turn to black. It's a Samsung LCD monitor and is over three years old. Not sure if the warranty is still valid but I just wonder what option would me more efficient: 1) Have the monitor fixed for a small amount. 2) Buy a new monitor for a slightly bigger amount. When monitors were still expensive, I wouldn't doubt about this and would just have my monitor repaired. But prices are so low nowadays, (and repairs are expensive) that I wonder if it's worth the trouble... Of course, I'm in no hurry since I still have another monitor. It's just that I liked the dual-monitor setup. Solved! Just ordered a new monitor. A Samsumg Syncmaster T260HD 25,5". Much more than it would cost me if I just had my old one repaired but I noticed that this one has a build-in TV tuner, plus speakers. It's way more expensive than a repair, but it's worth the additional value it provides.

  Read the article

• Microsoft Application Request Routing with Windows Authentication

  - by theplatz

  I'm running into a problem trying to get Windows Authentication working in an environment that uses Microsoft Application Request Routing and was hoping someone might be able to help. The problem I'm running into is that only some requests are authenticated, while others fail with 401 errors. I have followed the Special Case of Running IIS 7.0 in a Web Farm instructions found at http://blogs.msdn.com/b/webtopics/archive/2009/01/19/service-principal-name-spn-checklist-for-kerberos-authentication-with-iis-7-0.aspx to no avail. My current server setup looks like the following: ARR Two servers set up with IIS shared configuration using IIS 7.5 on Windows 2008 R2 Anonymous authentication turned on for the Default Web Site Web Farm Two servers running IIS 7.5 on Windows 2008 R2 Three web sites set up using port binding to differentiate between virtual hosts. Ports being used are 8000, 8001, and 8002 Application pools for Windows Authentication all use a common domain account SPN added to domain account for http/<virthalhost-name>:<port-number> and http/<virtualhost-name>.<fully-qualified-domain>:<port-number> The IIS logs show the following when authentication is working/failing. If I understand correctly, all requests should show DOMAIN\User_Name: 2012-11-19 15:03:17 CLUSTER-IP-ADDRESS GET /home/stylesheets/techweb.landing.css - 8002 DOMAIN\User_Name ARR-HOST-1-IP-ADDRESS 200 0 0 62 2012-11-19 15:03:17 CLUSTER-IP-ADDRESS GET /home/images/user-background-right.gif - 8002 - ARR-HOST-1-IP-ADDRESS 401 2 5 0 2012-11-19 15:03:17 CLUSTER-IP-ADDRESS GET /home/images/user-background-left.gif - 8002 DOMAIN\User_Name ARR-HOST-IP-ADDRESS 200 0 0 31 2012-11-19 15:03:17 CLUSTER-IP-ADDRESS GET /home/images/user-icon.png - 8002 - ARR-HOST-1-IP-ADDRESS 401 2 5 0 2012-11-19 15:03:17 CLUSTER-IP-ADDRESS GET /home/images/user-icon.png - 8002 - ARR-HOST-1-IP-ADDRESS 401 1 2148074248 0 2012-11-19 15:03:17 CLUSTER-IP-ADDRESS GET /home/images/application-icon.png - 8002 - ARR-HOST-1-IP-ADDRESS 401 1 2148074248 0 2012-11-19 15:03:17 CLUSTER-IP-ADDRESS GET /home/images/user-background-right.gif - 8002 - ARR-HOST-1-IP-ADDRESS 401 1 3221225581 15 2012-11-19 15:03:17 CLUSTER-IP-ADDRESS GET /home/images/building.gif - 8002 DOMAIN\User_Name ARR-HOST-2-IP-ADDRESS 200 0 0 218 Does anyone know what might cause this problem and how I can resolve it?

  Read the article

• Location directive in nginx configuration

  - by ryan

  I have an nginx server setup to act as a fileserver. I want to set the expires directive on images. This is how a part of my config file looks like. http { include /etc/nginx/mime.types; access_log /var/log/nginx/access.log; sendfile on; #tcp_nopush on; #keepalive_timeout 0; keepalive_timeout 65; tcp_nodelay on; gzip on; gzip_disable "MSIE [1-6]\.(?!.*SV1)"; location ~* \.(ico|jpg|jpeg|png)$ { expires 1y; } include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; } I get the following error when I reload config - "Location directive not allowed here". Can someone tell me what the right syntax for this is? Thanks in advance. EDIT : Found the answer myself. Added it in a comment. Closing this.

  Read the article

• Error setting up Data Protection Manager 2010 Agents / Network "Unauthenticated" in network settings

  - by Bowsa

  I'm not sure if the two are connected but i suspect they are. Basically I'm tring to setup Data Protection Manager 2010 on a fresh install of Server 2008 R2 in a SBS 2003 domain. Everything went fine until trying to install agents across the network. Upon clicking add, i get the following error message: Unable to connect to the Active Directory Domain Services Database. Make sure that the DPM server is a member of a domain and that the controller is running. Also verify that there is network connectivity between the DPM server and the domain controller. ID: 7 As usual (worryingly) the MSDN support for 2010 products is nearly non existant, clicking the error ID simply gives a page not found error. So after 2 days of Googling and trying various fixes (DNS settings, adding permissions to AD objects, rejoining the domain and many more) I thought I'd ask here in the hope that someone out there may have had this issue before. Any help greatly appreciated! Some further info: Firewalls are disabled on the Server 2008, SBS, and client machines. Manually installing and adding the client in also fails, as the DPM server tries to contact the DC first. Edit: I tried creating a new protection group instead, and it gives a different error upon adding the machines: Following machines are not found in AD: COMPUTERNAME.COMPANYNAME.LOCAL Is there a certain directory structure it follows in AD?

  Read the article

• Mounting a VirtualBox shared folder on boot with fstab in OpenSuse 11.3

  - by ccook

  I have followed the steps found here, however, the share is not mounted on boot. The share will mount if i run 'mount -a' after booting. Why would the share not mount on boot? 1 - Set up a Virtual Machine and install OpenSUSE 11.2 2 - Create a shared folder on host (HostFolder) 3 - Setup the shared folder in Virtualbox Via the Virtual Machine details or via Devices Shared Folders... 4 - Install dependencies for running the Virtualbox installer You need to install the right development kernelpackage for your machinetype (use 'zypper search -i kernel' to see what's installed) sudo zypper install make gcc kernel-source kernel-hosttype/default-devel 5 - Run the Virtual Machine and go to Devices Guest Additions This mounts an iso image in your OpenSUSE guest. 6 - Open a root terminal and run cd /usr/src/linux make oldconfig && make prepare && make scripts && make dep cp ../linux-obj/$HOSTTYPE/default/Module.symvers . make prepare A commenter on previously mentioned thread says this step is unnecessary but it doesn't work without on my system. I suggest trying step 7 first and returning to step 6 if that fails. * 7 - Run ./VirtualboxLinux yourhosttype .run from the mounted iso image. 8 - Create shared folder in OpenSUSE (GuestFolder) 9 - Test with sudo mount -t vboxsf HostFolder /home/user/GuestFolder It works? Great! Let's set up the system so it automounts for your regular useraccount instead of root-only access. 10 - Add this line to /etc/fstab HostFolder /home/user/GuestFolder vboxsf defaults,uid=1000,gid=1000 0 0 11 - It works for me but if it still doesn't automount after a reboot; sudo mount -a

  Read the article

< Previous Page | 548 549 550 551 552 553 554 555 556 557 558 559  | Next Page >