Search Results

Search found 21945 results on 878 pages for 'online services'.

Page 554/878 | < Previous Page | 550 551 552 553 554 555 556 557 558 559 560 561  | Next Page >

• OSSEC agent behind NAT

  - by Eric

  I am working on an OSSEC deployment where I will have multiple agents behind 1 public IP. Below is an example of the setup Private Network OSSEC-Agent1 (192.168.1.10) OSSEC-Agent2 (192.168.50.33) OSSEC-Agent3 (10.10.10.1) Those IPs NAT to 1 public IP (1.1.1.1) Then 1.1.1.1 talks to the public OSSEC server on 2.2.2.2 I've read some OSSEC documentation talking about NAT here, but it doesn't tell me exactly what I need to know. Their example is using an entire /24 subnet and mine will mainly have multiple agents to only 1 public IP. With the setup so far, I brought Agent1 online fine and it is communicating to the OSSEC server. However Agent2 continues to fail trying to connect to 2.2.2.2. Even though when I added the key, I had the correct name for it, so I know it talked to the portal at least once for that information. I'm assuming it's just getting confused with the multiple keys to 1 public IP. I basically want to know if this is possible and/or if I'm just overlooking something simple. Any help would be greatly appreciated.

  Read the article

• Windows server 2008 can't uninstall FTP

  - by Mr. Flibble

  I'm trying to uninstall the old IIS6 FTP service on Windows Server 2008 so that I can install FTP 7.5. In server manager I clicked remove role services and uninstalled FTP and restarted. The Web Platform Installer 2.0 RC says FTP Service is still installed but it appears uninstalled in server manager. When I try to install FTP7.5 it says that it is incompatible with FTP and that I need to uninstall that first. Is there something else that I need to do to get rid of the old FTP service? Here is a screen shot showing what is installed and the error I'm receiving:

  Read the article

• How to use psexec to start installation or other task that requires UAC interaction?

  - by Miguel Ventura

  I'm trying to remotely start installations and I'd like not to disable UAC. If I start the processes remotely using psexec, the installer will just get stalled waiting for the UAC prompt. Other tasks such as temporary files cleaning, services restarting, etc, will get me Access Denied errors. Is there anyway psexec can walk around UAC such as logging in with Administrator but with the TrustedInstaller privileges or something like that? By the way, I'm targeting Windows 2008 R2, but I think this question applies to Vista, 2008 and Windows 7 as well.

  Read the article

• Getting around the lack of GPT support with CentOS 5.4

  - by sxanness

  Here is my issue and I hoping that there is someone out there that has an answer so I don't end up stuck here at my co-location all day. Last night I came here and upgraded a server (Dell 2970) to have four 1TB Hard Drives in RAID 5 which leaves a 3TB block. I tried to partition this but keep getting an error that GPT is not supported so I found a site online telling me I need to run the dd command and right random data to /dev/sda. This is great (if it works) but taking forever. I have two more machines to upgrade today and not a chair in site. Does anyone have advice on how I can avoid this issue beforehand? Thank You for your advice and support.

  Read the article

• Error: Unable to load OraOps10.dll

  - by Rodnower

  Hello, I have NT services compiled with 32 bit version of oracle client on windows 7, but when I run this service on windows 2008 I get error: Unable to load OraOps10.dll. I guess that this is because I have newer version of oracle client on the server then on my development station, but I can not install old (32 bit version) client on server, and can not install 64 bit client on development station... So may be there is some solution like manually to copy some files and change values in registry? Thank you for ahead.

  Read the article

• Dual HDMI input - HD Video Capture Card

  - by Shivan Raptor

  Any suggestion for HD video capture card? Here is my requirements: I need 2 HDMI input for 2 HD Camera the signal captured will be encoded with Adobe Live Encoder (does it support dual input sources? I do not require mixing of 2 sources) the encoding format will be H.264 (720p), then will be sent to Adobe Flash Media Interactive Server for LIVE broadcasting. http://www.blackmagic-design.com/products/intensity/ I found the one above online, but I am not sure about its performance, and it has only 1 HDMI input. If I plug 2 of them into my workstation, will it conflict with each other?

  Read the article

• Project management, timesheet and planning software

  - by hfidgen

  Hiya, I'm trying to find an integrated PM solution which will give my business all of the following: Timesheeting so we can track time spent on tasks Holiday planner (integrated with timesheet and project management Project management tool, integrating the above, with milestones, gantt chart, dependancies etc. Forecasting ability (nice to have, but not a requirement) Reporting capability - especially time spent on projects, costs etc. Now yeah, that's quite a lot of functionality, I appreciate that! But currently we've got 3 systems, none of which really talk to each other and it's a right headache. So far we've looked at: OpenWorkbench - not enough features Basecamp - not enough features and too reliant on online MS Project - too expensive? Can anyone throw some other hats into the ring which maybe I've not heard about? Really interested to hear how other people have approached this, it's not an unusual business requirement! Thanks!

  Read the article

• IIS won't start

  - by doekman

  When I startup my computer, pages from my local webserver (IIS) won't load. In the event viewer(System log) I get the error below. The only way I get IIS to work again is to issue an iisreset.exe. I have Windows XP. Any ideas to fix this? Event Type: Warning Event Source: W3SVC Event Category: None Event ID: 36 Date: 27-4-2010 Time: 10:30:47 User: N/A Computer: NLD4P4Z2J Description: The server failed to load application '/LM/W3SVC'. The error was '8007045b'. For additional information specific to this message please visit the Microsoft Online Support site located at: http://www.microsoft.com/contentredirect.asp. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Read the article

• Resizing RAID 1 Array on Dell PowerEdge with Perc 4/Di & Windows SBS 2003

  - by Scott McKinney

  I have a Dell PowerEdge 2600 with Perc 4/Di RAID card and Windows SBS 2003 installed. The original system drive was a set of 17GB drives in a RAID 1 array. Over the years, these drives have failed (individually) and been replaced by a set of 73GB drives, but the RAID array is still 17GB in size. Is there a safe procedure to resize the RAID 1 array to use the entire 73GB without destroying/corrupting the data on the array? The Perc documentation mentions a Reconstruct option with Online Capacity Expansion, but is a woefully short on the exact details. Has anyone performed this procedure successfully (or unsuccessfully)? What were the steps? Are there any gotchas I should watch out for?

  Read the article

• WebDAV "PROPFIND" exception in IIS due to network share?

  - by jacko

  Hi all, We're finding continuous exceptions in our event viewer on our live box to the following exception: [snippet] Process information: Process ID: 3916 Process name: w3wp.exe Account name: NT AUTHORITY\NETWORK SERVICE Exception information: Exception type: HttpException Exception message: Path 'PROPFIND' is forbidden. Thread information: Thread ID: 14 Thread account name: OURDOMAIN\Account Is impersonating: True Stack trace: at System.Web.HttpMethodNotAllowedHandler.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) Other Specs: Windows Server 2003 R2 & IIS 6.0 We've narrowed it down to occuring when people try to access shares on the box from within the network, and have discovered (we think) that its due to the WebDAV web services extension being previously disabled by past staff. The exceptions are being thrown when trying to access directories that are virtual dirs in IIS, and plain old UNC network shares What the implications for enabling the WebDAV extensions on our live web server? And will this solve our problems with the exceptions in our event log?

  Read the article

• Can I use MX records to deliver some addresses to Google Apps and some to my server?

  - by Josh

  I have whm installed on my VPS, which my domain MX records are pointing to: 0:mail.mydomain.com and whm/cpanel has mail forwarding rules which pipes certain @mydomain email addresses into my CRM software. But for certain email addresses I want to forward into Google Apps. For example, [email protected], [email protected] pipes into cPanel -- CRM (mail.mydomain.com) but [email protected] should be going to Google MX records. Is that possible? The reason why is I want to register for Google Apps such as analytics and other Google services under [email protected]. My initial thoughts were to add a subdomain such as [email protected] and point that subdomain's MX records to Google.. but I want to avoid this if possible.

  Read the article

• Access Denied Error in PagesListCPVEventReceiver post SharePoint SP2 upgrade

  - by JD

  I am seeing the following errors from one of the SharePoint Web Front Ends after the SP2 upgrade. Has anyone else seen this error or a solution? Event Type: Error Event Source: Windows SharePoint Services 3 Event Category: General Event ID: 6875 Date: 2009-10-27 Time: 13:09:57 User: N/A Computer: XXXXXXX Description: Error loading and running event receiver Microsoft.SharePoint.Publishing.PagesListCPVEventReceiver in Microsoft.SharePoint.Publishing, Version=12.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c. Additional information is below. : Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)) For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Read the article

• How would you shorten 5,000+ URLs? [closed]

  - by Tyler J Fisher

  How would you go about shortening approximately 5,000 permalinks? The links point to a remote media archiving server, and are unlikely to change. Example URLs: rtsp://foo-1.bar.com/xx/xx/xx/xx.rm http://media.foo.org/xx/xx/xx.mp4 The URLs are going to be stored in a local MySQL database, as such it's crucial that the URLs are in a manageable form (i.e bit.ly or ow.ly). There are bulk URL shortening services, but those only allow shortening of 100 links/day, which isn't technically feasible so I need to think of something else.

  Read the article

• Install Windows 7 x64 from a separate partition on same hard drive (no DVD/USB)?

  - by Fraser

  I'm currently running Windows XP 32-bit, and want to install Windows 7 64-bit. However, my DVD drive is broken, and the only USB sticks I have lying around are USB 1.1 only (SLOW!). So I tried (as suggested would work for a USB stick by several online guides): Created new primary partition (formatted NTFS) Set that partition as active Copied contents of Win7 x64 ISO Downloaded the 32-bit bootsect.exe Ran bootsect /nt60 F: However, when I boot into the new partition, I only see a blinking cursor on a blank screen; nothing happens. Any ideas?

  Read the article

• Backup Exec 2010 throwing error trying to restore Exchange mailbox

  - by Mindflux

  Error category : Resource ErrorsError : e000848c - Unable to attach to a resource. Make sure that all selected resources exist and are online, and then try again. If the server or resource no longer exists, remove it from the selection list. Edit the selection list properties, click the View Selection DFor additional information regarding this error refer to link V-79-57344-33932 I've got the Exchange agent loaded on the Exchange server. Through talking with some other folks I've added the Exchange Management Console to the Media(Backup) server. None of this has helped. I can back up Exchange all day long, however I cannot restore from it. I've followed the link given (V-79-57344-33923) which goes here and none of that has helped either. Server is running: Win Server 2008 w/ SP2 (64 bit) Backup Exec 2010 I am backing up to a Tandberg T24 tape library.

  Read the article

• BCM 2007 not opening contacts...

  - by Christopher

  Business Contact Manager for Outlook (2007) is refusing to open contacts. This problem appeared this morning on every machine (Windows XP SP3) on our network. The contact list does populate as normal, and contacts can be printed from the context menu, but the form that displays the contact information does not display, and no error message is thrown. I have turned on logging for BCM in the help menu, but nothing is being generated (or, leastways, I cannot find it anywhere). The SQL services appear to have started as normal. Anyone come across this before I take a deep breath and go with my boss' suggestion of "just reboot the server"? Any other information you need? Thanks.

  Read the article

• Create mirror software raid with bad blocks hdd. How to check data integrity?

  - by rumburak

  There is error in System event log like this one: "The device, \Device\Harddisk1\DR1, has a bad block." Because of above I created Raid 1 on this disk and other one. I'm using Windows Server 2008 R2 software RAID volumes. Volume in Disk Manager is marked as "Failed Redundancy" and "At Risk". I could command to "Reactivate Disk" and it's starts to re-sync, but after a while it stops and returns to previous state. It stops re-sync on bad block on old disk and creates same error in System event log. Old disk status is Errors, new disk status is Online. How can I check that there is exact copy of the old disk on new one ? It is server machine so I would prefer to keep it running during this check.

  Read the article

• How can I connect a Windows 8 PC to a Samba domain

  - by Paul

  I am using Samba 3, and want to join my Windows 8 PC to the Samba domain. Windows 8 cannot join out of the box, so I added the following registry entries: HKLM\SYSTEM\CurrentControlSet\Services\LanmanWorkstation\Parameters DWORD DomainCompatibilityMode 1 DWORD DNSNameResolutionRequired 0 And now it talks to the Samba server ok, however I get the following error: And I notice that the machine name created on the samba server does not match its name: win-8jq3fg1n74e$:x:30003:30003:Machine:/var/lib/nobody:/bin/false It is like it is using an internal name. The following is the error in the smb.log [2012/10/21 14:26:16.099520, 0] passdb/pdb_interface.c:348(pdb_default_create_user) _samr_create_user: Running the command `/usr/sbin/useradd -c Machine -d /var/lib/nobody -s /bin/false win-8jq3fg1n74e$' gave 9 [2012/10/21 14:26:28.143224, 0] lib/util_sock.c:474(read_fd_with_timeout) [2012/10/21 14:26:28.143420, 0] lib/util_sock.c:1441(get_peer_addr_internal) getpeername failed. Error was Transport endpoint is not connected read_fd_with_timeout: client 0.0.0.0 read error = Connection reset by peer.

  Read the article

• Blue Screen Of Death after Graphics Card Update

  - by John Smith

  I recently installed the game watch dogs After installing it i upgraded the drivers on my graphics card AMD Radion R9 200 series via the catalyst software and since then windows has been crashing on an ad-hoc basis even when sitting idle I have recieved two different sets of errors OXOOOOOOO1 and VIDEO_SCHEDULER_INTERNAL_ERROR I am running windows 8.1 with the driver 14.4 from AMD My PC shouldnt really be having this problem as it is pretty high spec due to my work Any help would be greatly appreciated as it is driving me up the walls a bit [UPDATE 08-06-2014] I have been looking around online and have crashed the PC a few times now trying to recreate the bug I have looked into the event history viewer and gotten the following errors amdacpusrsvc acpusrsvc: IOCTL_ACPKSD_KSD_TO_USR_SVC_SET_FB_APERTURES: FAILED acpusrsvc: GfxMemServiceInitialize: FAILED amdacpusrsvc acpusrsvc: IOCTL_ACPKSD_KSD_TO_USR_SVC_SET_FB_APERTURES: FAILED amdacpusrsvc acpusrsvc: GfxMemServiceInitialize: FAILED I took some advice from the AMD forums to re-install the old drivers to see if they would work. I uninstalled the old ones first and installed directly from the CD I got the warnings below but the driver installed "successfully" The Warnings are amdacpusrsvc acpusrsvc: ConfigureFrameBufferMemory: FAILED. Hopefully this will spark something off for someone Thanks John

  Read the article

• Which software could I use to setup a 4in6 IP tunnel (RFC 2473) on GNU/Linux

  - by Mildred

  Here is my problem. I have a server A that has two IP addresses. One public IPv4 and one IPv6. Server B has only one IPv6 address. I want to host most of my services on server B (because I have more disk space on it, I can control it better) but I need the IPv4 of the server A. I would like to set up a 4in6 tunnel (RFC 2473) between A and B so that I can transfer the traffic from the IPv4 address in A to B. If needed, I can request another IPv4 address on the server A, but I'd prefer not to. My question is: which software use to do the 4in6 tunnelling? I suppose OpenVPN can do the thing, but is there any implementation of the 4in6 protocol on Linux? A little more challenging: the IPv4 address comes from a venet interface, which cannot be bridged. How could I transfer ownership of this address I don't use on server A to the server B? Thank you

  Read the article

• How much should a Systems Administrator be making?

  - by Curtis

  Hello, I'm a Sys Admin for a small (but successful and growing) company (~60 employees). I've got roughly 5-6 years of actual sys admin experience, plus another 5+ years of lower level work in the industry. I'm responsible for most everything above a helpdesk level in the company (server[windows]/network[cisco]/firewall/SAN[emc] setup/configuration/maintenance/troubleshooting), lead many projects, analyze system data -- I'm sure you've heard it all before...I have a bunch of certs, most are just "nice to have", but the ones that actually apply to my role are CCNA, MSCE, VCP (VMware). If things go wrong, I'm first in line to resolve the issue. I'm not management (no one reports to me). I've seen many of these sorts of questions online before, and I know the typical response is "too many variables, depends on location, industry type" etc etc. I'm just wondering (ballpark) what I should be looking for. I've tried to give as much detail as I can, but if I'm missing something, I'd be glad to post it. Thanks anyone.

  Read the article

• How do I restore my system from a "Backup and Restore Center" backup?

  - by Daniel R Hicks

  The Windows (Vista) documentation and available online info is comprehensively vague. If I have a moderately brain dead system and want to restore it, and I have a "Backup and Restore Center" backup whose "delta" is not quite a week old (but with a "full backup" behind it), what steps do I go through to recover my box back to that backup point? It's totally unclear whether simply doing "restore all" from the (advanced) "Center" is sufficient, or do I need to first take the box back to day zero with the system restore DVD, et al? (Just editing this to get my correct ID associated with it.)

  Read the article

• ISP doesn't allow incoming connections (i.e., hosting a server) - anyway to get around this using a VPN?

  - by Josh1billion

  My ISP, like many today, doesn't allow incoming connections, so if I try to host server software on my home PC, then anyone (even myself) trying to connect to that server software via my public IP address is not able to establish a connection. This becomes a problem because hosting online games is impossible. I do have a VPS Linux box rented; is there any VPN software I could install on it that I could connect to from my home PC, and then anyone connecting to a specific port on that VPS will just have the traffic tunneled to my home PC, allowing me to host games that way? If so, what software do I need (on both my PC and on the VPS), and how do I configure it?

  Read the article

• SQL Server 2000 msdb database loading/suspect

  - by Blake Parcell

  My SQL Server recently suffered a raid controller/hard drive crash. After getting my hard drive problem corrected I soon found that some of my databases were (suspect) namely msdb. I am not a DBA by any means however am somewhat familiar with the daily SQL activities that happen on my server. So I restored from backup, and tried to bring my msdb database online. It is now forever stuck in (Loading\Suspect) and I am unable to script backups for my important databases. I can recreate all of the backup plans etc if i can somehow get a working msdb. Any help would be greatly appreciated. I am currently using: Microsoft SQL Server 2000 Version: 8.00.194

  Read the article

• Ubuntu server failing daily

  - by deanvz

  Symptoms: Server becomes unresponsive - Increase in load, all services stop Loss of connectivity - Ping/SSH Flush MySQL hosts after reboot - As MySQL refuses new connections Intermittent Apache crashes Generally happens early morning hours - 2 days of the week are however excluded Changes made: Updated the OS - to Ubuntu 10.04.4 LTS Not sure if the MySQL server was also updated in the process Current MySQL version - mysql Ver 14.14 Distrib 5.1.63, for debian-linux-gnu (x86_64) using readline 6.1 Updated Plesk from 10.4.4 Update #47 to 11.0.9 Update #23 Rebooted on almost daily basis All crons stopped for the times corresponding to the server crashes Created a MySQL log to monitor the lock times on queries Possible causes: Failing hardware Incorrect software configuration (MySQL, Apache etc) Responsibilities: Small webserver Runs our billing system - WHMCS Responsible for CRONs Bulk-email solution - No delivery times coincide with server crashes Proposed solutions: Move machine over to VM Format and restore the Plesk server backup and take it from there? Side notes: Seems to be a general Apache failure across all our linux servers - Intermittent problem Are we doing something fundamentally wrong in the Apache config? (I understand that this is a secondary question, just making sure that it isnt possibly holding any relevance)

  Read the article

< Previous Page | 550 551 552 553 554 555 556 557 558 559 560 561  | Next Page >