Search Results

Search found 22139 results on 886 pages for 'security testing'.

Page 554/886 | < Previous Page | 550 551 552 553 554 555 556 557 558 559 560 561  | Next Page >

• FTP Active vs passive mode

  - by Dan

  I have a FTP server and while doing testing I found an odd issue that I don't understand. I send a RETR command on file "/Folder1/file.txt" and it works fine. Then I send a RETR command on file "/Folder1/SubFolder1/file.txt" and it times out on transfering the data to the client. This was in active mode. When I switch to passive mode it works fine. I understand the difference between the two modes, but what I don't understand is why it worked for one file in active mode, but not the other. I tried it a dozen times and still got the same results. Any ideas? Thanks!

  Read the article

• Check the disk for problems on Debian Lenny

  - by Equ

  Hi guys! I just bought a VPS hosting with Debian Lenny (I'm new to all this world). I've managed to install and setup everthing I need pretty well. My testing website works fast as expected most of the time, but sometimes it is really slow (response time is about 5-10 seconds). I checked everything and seems that there are may be some disk issues. How can I check the disk for problems/performance? What else could possible cause such a behaviour? Thank you!

  Read the article

• Best DSL hardware for ADSL Troubleshooting

  - by Jeff Sacksteder

  I have a situation where I need to make the best of a bad DSL situation. The CPE is a black box with no access to DSL diagnostics. My plan is to get some sort of DSL hardware that exposes link-layer state and gives me knobs to tweak. I'd like to be able to mitigate bufferbloat as much as I can while I'm at it. The obvious choice would seem to be a Sangoma card in a linux system. I have no way of knowing if that will do anything for me without testing it, however. I have no other access to WAN troubleshooting equipment. Are there any other options avail to me as a consumer?

  Read the article

• How to reliably run a batch job every 5 seconds?

  - by Benjamin

  I'm building an application where the sending of all notifications (email, SMS, fax) will be asynchronous. The application will write the notifications to the database, and a batch job will read these notifications and send them with the appropriate transport. I was first reading at ways to run cron faster than the minute, and realized this was a bad idea. The batch scripts are written in PHP, and I guess that writing a proper daemon would be quite an overhead (though I'm open to any suggestion, as PHP car run indefinitely as well). What I have in mind is a solution that would: Run the PHP script every 5 seconds Check that the previous run has finished, or abort (never 2 concurrent batches running) Kill the script if live for more than x minutes (a security in case it hangs) Start with the system (if a reboot occurs) Any idea how to do this?

  Read the article

• Microsoft DNS Server (Windows 2008) CNAME issue

  - by Lukes123

  I am using the DNS role in Windows Server 2008 R2. I have my records set up correctly with the following CNAMEs: {removed domain names for security} Currently, only the 'wsp' cname works. All the records are identically set up. I have checked with a DNS checker, and the other two CNAMEs do not resolve to anything. I have tried restarting the server, re-creating the forward lookup zone. Can anyone see what is wrong? 'A' records work fine when set.

  Read the article

• s3cmd run on command line not on cron

  - by Jonar

  Many have said that the problem is with environment but I still can't seem to solve this problem. BTW I am using Ubuntu 9.10 login as user, then sudo -s using this command: s3cmd put file s3://bucket worked! now here is the simple script intended for testing: #! /bin/bash env >/tmp/cronjob.log s3cmd put file s3://bucket issuing the command crontab -e * * * * * /opt/script 2>&1 | logger Then using tail to syslogs Dec 3 23:22:01 ubuntu CRON[10795]: (root) CMD (/opt/script 2&1 | logger) But by verifying it on s3Fox Organizer, the file is not uploaded. (I tried changing the #! /bin/sh (no effect), putting crons on /etc/crontab (no effect), setting HOME=/home/user (no effect) What are other options to try? Or other ways to debug this problem. Thanks

  Read the article

• Recoomend company to take care or webserver and wordpress management?

  - by javipas

  I'm interested in setting up a professional WordPress site but I'd like to explore the pssibilities to leave the management of the webserver and even WordPress' management to a company that guarantees great availability, performance of the site (load times, security) and even SEO. My site is currently running on other platform but I plan on a migration on the next 4 weeks. I've done this usually, but I'd like to focus on the content, so I don't have to mess with webserver/mysql/php configs in order to get nice performance. Is there some (maybe hosting) company that is dedicated to this? Would it be better to hire a sysadmin with experience in those matters?

  Read the article

• Samba share doesn't have write permissions

  - by blsub6

  alright, I've got one that should be really simple. I want a wide open smb share for my Windows 7 machine. Everyone should be able to access it, regardless of domain or username or anything. My smb.conf has: security = share guest account = nobody Along with: [DC_Backup] path = /Windows_Backups/DC comment = Backup of Domain Controller force user = nobody guest ok = yes public = yes read only = no I can access it, but I cannot write to it. Windows keeps telling me I "need permission to perform this action" Where do I start?

  Read the article

• Why is my ethernet interface in promiscuous mode

  - by nhed

  I read that seeing a flag of M in netstat -i is the way to tell which of your interfaces is in promiscuous mode I run it and I see that eth1 is in promiscuous mode $ netstat -i Kernel Interface table Iface MTU Met RX-OK RX-ERR RX-DRP RX-OVR TX-OK TX-ERR TX-DRP TX-OVR Flg eth1 1500 0 1770161198 0 0 0 57446481 0 0 0 BMRU lo 16436 0 97501566 0 0 0 97501566 0 0 0 LRU This seems to be the case on all the machines I checked (All Centos6.0, both virtual and physical), any idea why ethernet devices would be in such a mode unless someone was running any pcap based app (sudo lsof | grep pcap shows nothing)? I did not see any mention of promiscuous in any of the config files (sudo grep -r promis /etc) Any ideas what puts the interface into that mode and why? p.s. most of the posts I see seem to be security related, this is not that

  Read the article

• Exchange 2007 mailbox reassignment

  - by John Virgolino

  I am trying to move a mailbox from one user account to another within a single AD domain. We are using Exchange 2007. I have followed these steps: Disable the account From "Disconnected Mailbox" container, connect to the new account I get a success message When I try to login to OWA using the new user account, I get this message: Outlook Web Access could not connect to Microsoft Exchange. If the problem continues, contact technical support for your organization. Request Url: https://mail.somedomain.com:443/owa/default.aspx User host address: 1.2.3.4 Exception Exception type: Microsoft.Exchange.Data.Storage.ConnectionFailedTransientException Exception message: Cannot open mailbox /o=cgsexchangeorganization/ou=exchange administrative group (fydibohf23spdlt)/cn=recipients/cn=someuser. NOTE: I changed some identifying information for security purposes. I have tried multiple times and get to the same place. When I login to OWA with old account, I get an error that the mailbox cannot be found, which makes total sense. Does anybody have any ideas on this? Thanks!

  Read the article

• windows 2003 - why can't serial port be accessed remotely?

  - by Danny Staple

  we have recently installed the updates on some of our servers, which have a bit of hardware attached via USB that presents itself as a serial (COM) port. The strange behaviour is that if I start a cmd shell on the server via VNC, I can open the serial port. If I run a service and start it from there (telnet, jenkins) then I receive a "not found" error for it. IE: C:\Documents and Settings\some_user>echo 1 >COM4: C:\Documents and Settings\some_user> on the local cmd will work, and on the remote telnet will give: C:\Documents and Settings\some_user>echo 1 >COM4: The system cannot find the file specified. C:\Documents and Settings\some_user> I cannot see any security settings on the Device manager settings panel for this device.

  Read the article

• Connection shortcut doesn't work at startup - Win 7

  - by kikio

  Hello. I want connect automatically to a network with a dial-up connection at windows startup. So after I created a new connection, I created a shortcut from this and placed it in "Startup" folder (at start menu). But after restart my system, windows 7 was coming up without start to connect to my network (that shortcut in startup didn't work!). but I placed a shortcut from Mozilla Firefox in startup folder for testing that, and it started at windows booting. My windows is WINDOWS 7 ULTIMATE. What can I do??? Please help me!!!

  Read the article

• Does Exchange have ability to run hidden mailboxes?

  - by MadBoy

  Hello, Title of my question may sound a little bit odd but I was thinking if Exchange 2010 or 2007 or any program that would work in conjunction with Exchange has ability to create this structure: Users having their normal mailboxes connected and using them as everyone would in Outlook 2003/2007/2010. Users having additional mailboxes (from old Exchange 2003) attached but hidden on demand of Administrator. For example administrator could easy disable them just like they never been attached making them invisible to users and everyone else. Would be good if such mailboxes could be easily removed out of system (lets say on external drive) by simple step not manual job for 100 mailboxes. Users without ability to copy/move their mails to outside storage (like a local .pst file)? Do you guys have any suggestions on this? I was thinking maybe using public folders but this seems like overkill and not really suited for this. And please don't ask me why I need this type of security (it's not something I requested).

  Read the article

• SSL 3.0 warning in Chrome on Ubuntu 10.04LTS

  - by Leopd

  I'm running Apache2 with SSL on Ubuntu 10.04LTS. Chrome gives me this annoying warning when I inspect the certificate: The connection had to be retried using SSL 3.0. This typically means that the server is using very old software and may have other security issues. The relevant part of the apache config looks like: SSLEngine on SSLCertificateFile /etc/ssl/... SSLCertificateKeyFile /etc/ssl/... SSLCACertificateFile /etc/ssl/... SSLProtocol -all +SSLv3 +TLSv1 The last line I added to try to address this problem, but it's not working. Any advice on properly enabling TLS?

  Read the article

• recommendations for a lightweight linux distribution for a test server

  - by Jack

  I'm planning on setting up a test server to experiment with some application servers (tomcat/jboss/...) and with some portals. Now the machine I've set aside for this is lightweight CPU/GPU wise(Atom D510, 4 gigabyte ram, 500 GiB hdd, onboard GPU). But it should suffice for most things, I'm more interested in the stability of JBoss/Tomcat for my purposes than the stability. However I'm having a bit of trouble picking an appropriate distribution size/performance/setup time wise/security wise since it seems I can't sneeze without another distribution popping up. I've been thinking about going for Fedora since I've read that that distribution has been optimized for Atom, but I'm not really familiar with it. My experience with Linux has mostly been limited to Ubuntu and some tinkering with puppylinux. I'm not afraid to get my hands dirty using the command line. I'm not planning on starting a discussion per se, mostly the pros/cons that people have encountered with some distributions

  Read the article

• How can I persist certificates in Java's cacerts?

  - by Alan Spark

  We need to have a certificate in Java's cacerts keystore for one of our servers that is authenticated by LDAP. We are using Ubuntu server. We have successfully done this by updating the cacerts file in /usr/lib/jvm/java-6-openjdk-amd64/jre/lib/security but occasionally a Java update is installed and the cacerts file seems to be getting replaced by a default one that doesn't contain our changes. This doesn't happen very often but it is becoming a bit of a pain when it does happen. Is there a better way of adding things to cacerts so that they don't get lost when a Java update happens? Thanks, Alan

  Read the article

• SAMBA and Linux ACLs -- "Permission denied" on write to share but file written nevertheless

  - by MCH

  I set up a writable share directory "/home/net/share" with acl like this: sudo mkdir -p "/home/net/share" sudo setfacl -m "u:localuser:rwx,u:remoteuser:rwx,g:users:rwx" "/home/net/share" My /etc/samba/smb.conf looks like this: [global] workgroup = w server string = server security = user load printers = no log file = /var/log/samba/%m.log max log size = 50 dns proxy = no printing = bsd printcap name = /dev/null disable spoolss = yes encrypt passwords = true invalid users = nobody root follow symlinks = yes wide links = yes [share] comment = Writable by localuser and remoteuser path = /home/net/share valid users = remoteuser read only = no public = no printable = no Locally, localuser and remoteuser have user accounts and smbpasswds and can both read, create and delete files in /home/net/share. But when I log on from a different machine (like this: sudo mount -t cifs //server/share mountpoint/ -o username=remoteuser ), I get "Permission denied" both when trying to create directories and files, oddly though, it does create files (not directories!) despite these messages! How can I get this working?

  Read the article

• What URLs must be in IE's Trusted Sites list to allow Windows Update?

  - by ewall

  Particularly for servers in which IE Enhanced Security Configuration is enabled, you need to have all the Windows Update/Microsoft Update URLs in your "Trusted Sites" list in order to use the site. (Furthermore, for domain member servers where Group Policy enforces Internet Explorer's list of "Trusted Sites", you don't have the option to edit the Trusted Sites yourself... so all the necessary URLs should be listed in the GPO.) So, what is the full list of URLs I'll need in IE's Trusted Sites? So far I have the following: http(s)://*.update.microsoft.com http://download.windowsupdate.com http://windowsupdate.microsoft.com I seem to remember there being several more...

  Read the article

• Monitor or log directory permission changes?

  - by Myles

  I'm having an issue with a cPanel shared server running CentOS 5 where a few directories under the public_html folder keep getting changed to 777 from 755. The customer says they are not changing it and i'm wondering if there is a way to monitor these specific directories to find out who/what is changing the permissions. I have looked into using auditctl and after testing it and changing the permissions myself I don't see anything in the logs so i'm not sure if i'm doing it right or if it's even possible. Does anybody have any suggestions or ideas on how I could figure out what is changing the permissions? Thanks!!

  Read the article

• slow disk writes between host and guest

  - by Jure1873

  I've got a ubuntu (server kernel) on a amd x4, 4gb ram, 2x seagate sata 1 tb disks for testing virtual machines and the write performance is very slow. The two disks are in a software raid1 array, one small boot ext3 partition, 10gb system partition and the rest is a xfs partition (about 980) gb for data (virtual machines). If I'm copying files from the virtual machine to the host with rsync or scp the copy frequently stalls or goes at about 1mb/s. What's wrong? I've tried disabling barriers on xfs, increased logbufs, allocsize, but it seems nothing helps. The strange thing is that await (for example during copying) for sda is usually under 100, while for sdb is around 400. Any ideas on what could be wrong / what could I do to improve this setup?

  Read the article

• Are there HP Infinihost III ex drivers for windows available?

  - by Matt

  I picked up some infiniband cards off ebay for development/testing purposes. I was hoping that there would be some drivers available under windows 7, but it doesn't seem to be recognised by the OFED software which would seem to contain windows drivers. They are however immediately picked up by Ubuntu and drivers are loaded. Are these cards supported under windows 7 at all? mstflint under linux reports: Image type: Failsafe FW Version: 4.8.930 I.S. Version: 1 Device ID: 25208 Chip Revision: A0 Description: Node Port1 Port2 Sys image GUIDs: 001a4bffff0c9374 001a4bffff0c9375 001a4bffff0c9376 001a4bffff0c9377 Board ID: (HP_0060000001) VSD: PSID: HP_0060000001 From what I can tell they are the following: HP IB 4X DDR PCI-e DUAL PORT HCA (HP part number 409376-B21)

  Read the article

• OpenVZ kernel panic

  - by GtoXic

  I recently installed OpenVZ on my VMWare box (To do some testing) and I get the following: https://www.dropbox.com/s/p38btkv5j84bvsh/Capture.JPG the GRUB config is as follows: # grub.conf generated by anaconda # # Note that you do not have to rerun grub after making changes to this file # NOTICE: You have a /boot partition. This means that # all kernel and initrd paths are relative to /boot/, eg. # root (hd0,0) # kernel /vmlinuz-version ro root=/dev/VolGroup00/LogVol00 # initrd /initrd-version.img #boot=/dev/sda default=0 timeout=5 splashimage=(hd0,0)/grub/splash.xpm.gz hiddenmenu title OpenVZ (2.6.32-042stab057.1) root (hd0,0) kernel /vmlinuz-2.6.32-042stab057.1 ro root=/dev/VolGroup00/LogVol00 sysfs.deprecated=1 initrd /initrd-2.6.32-042stab057.1.img title CentOS (2.6.18-238.el5) root (hd0,0) kernel /vmlinuz-2.6.18-238.el5 ro root=/dev/VolGroup00/LogVol00 initrd /initrd-2.6.18-238.el5.img

  Read the article

• SSH reverse tunnel to monitor and manage remote devices

  - by acid_crucifix

  I have a set a distributed set of devices running Ubuntu 12.04 that I am distributing to clients. I would like to manage them remotely. They may not have fixed IPs and potentially might be behind firewalls. What I am planning to do is have the devices (permanently connected to the net) poll a request URL and based on the response open a reverse tunnel to my server, so that I can access them via that tunnel. Most of what I read about reverse tunnel over SSH is for single use cases and very little about heavy production usage. Is there some reason for this, security issues? or stability? Any help would be much obliged.

  Read the article

• What are good and bad jitter times for a LAN

  - by garyb32234234

  Ive just ran jperf (frontend to iperf) on our network between 2 workstations, its recorded jitter between 0.033ms and 0.048ms. Is this good or bad? Are there more variables that i would need to consider to make the decision? EDIT: TCP/IP Ethernet LAN 43 PCs 1 server, 100Mbits main switch, various small 8 port switches, test was done using UDP, Its a Windows Domain. I want to instal a few voip softphones on the workstations, see how many i can use that reliably work, im testing a few different workstations around the network to see where the best quality network paths are. Will also change some equipment if i identify bad connections.

  Read the article

• login as rsh in rhel 6 without entering password

  - by cartmancakes

  I need to be able to login to a RHEL 6 server using rsh (please don't flame me about security, it's irrelevant in this particular instance) as root without having to enter a password. My procedure for setting this up works great in RHEL 5.x, but does not work in RHEL 6. I suspect this has something to do with PAM, but I'm inexperienced with how to use PAM. Can someone help me with this? /etc/pam.d/rsh auth required pam_rhosts.so auth required pam_nologin.so account include common-account password include common-password session required pam_loginuid.so session include common-session /etc/pam.d/rlogin auth required pam_nologin.so auth [user_unknown=ignore success=ok ignore=ignore auth_err=die default=bad] pam_securetty.so auth sufficient pam_rhosts.so auth include common-auth auth required pam_mail.so account include common-account password include common-password session required pam_loginuid.so session include common-session Thanks!

  Read the article

< Previous Page | 550 551 552 553 554 555 556 557 558 559 560 561  | Next Page >