Search Results

Search found 20155 results on 807 pages for 'things'.

Page 554/807 | < Previous Page | 550 551 552 553 554 555 556 557 558 559 560 561  | Next Page >

• Intermittent "Lost connection to MySQL server at 'reading initial communication packet'"

  - by db2

  Our web environment consists of two servers. Web front-end. Dell PowerEdge R610, RHEL 5.5, Apache 2.2.17, php 5.2.14. Database server. Dell PowerEdge R710, Windows 2008 R2 Standard x64, MySQL 5.5.11-log x64. Normally these two work perfectly fine together. However, when I try to get them talking via a dedicated LAN on their secondary NICs (each machine has four of them), things get flaky. I have NIC #2 on both machines configured on the 172.16.1.0/24 subnet, with no gateway or DNS servers (obviously, since it's just those two systems), and I put the private IP address of each machine into the hosts file of the other. The routing tables on both machines look okay after I do this. I've tried this with both a crossover cable draped directly between the two NICs, and also via a dedicated vlan on the switch in the rack. In either case, I get intermittent connection problems. It's a fairly small percentage of connections that fail, but it's enough to cause a significant problem, and I have to switch back to the main network connection, which will contend with all the other traffic and hosts on the switch. The full error message that appears in the application log: SQLSTATE[HY000] [2013] Lost connection to MySQL server at 'reading initial communication packet', system error: 110 Am I doing something really dumb that's causing this to not work properly? Anything I can check in MySQL that would explain why it's failing to connect occasionally?

  Read the article

• iOS 6 in-app email does not send from within any app that supports it

  - by Joe Termine

  A strange problem -- Last night I upgraded to the final release of iOS 6 on my iPhone 4S and my iPad 2. When I open an app that allows you to send emails from within the app (e.g. adobe Reader, TurboScan, etc.) -- doesn't matter which one -- I am prompted with the email dialog from within the app, I can compose the message, but when I go to send one of two things will happen: either the email sending sound will "swoosh" and the dialog will close (leading me to think it worked) or some apps with good error handling will say there is an "error sending email." The error logs on my device are not reporting errors. It's just that the email doesn't really send. I have two Exchange mail boxes on these devices. One connects to a corporate network hosting on-premise exchange 2007 and the other connects to Gmail over the exchange interface. Have attempted to delete and re-pair these accounts (one at a time) without any change. I'm wondering if others are experiencing this problem, or whether I should just wipe the devices and chalk it up to (another) failed upgrade. Thoughts much appreciated. Joe

  Read the article

• Chef: nested data bag data to template file returns "can't convert String into Integer"

  - by Dalho Park

  I'm creating simple test recipe with a template and data bag. What I'm trying to do is creating a config file from data bag that has simple nested information, but I receive error "can't convert String into Integer" Here are my setting file 1) recipe/default.rb data1 = data_bag_item( 'mytest', 'qa' )['test'] data2 = data_bag_item( 'mytest', 'qa' ) template "/opt/env/test.cfg" do source "test.erb" action :create_if_missing mode 0664 owner "root" group "root" variables({ :pepe1 = data1['part.name'], :pepe2 = data2['transport.tcp.ip2'] }) end 2)my data bag named "mytest" $knife data bag show mytest qa id: qa test: part.name: L12 transport.tcp.ip: 111.111.111.111 transport.tcp.port: 9199 transport.tcp.ip2: 222.222.222.222 3)template file test.erb part.name=<%= @pepe1 % transport.tcp.binding=<%= @pepe2 % Error reurns when I run chef-client on my server, [2013-06-24T19:50:38+00:00] DEBUG: filtered backtrace of compile error: /var/chef/cache/cookbooks/config_test/recipes/default.rb:19:in []',/var/chef/cache/cookbooks/config_test/recipes/default.rb:19:inblock in from_file',/var/chef/cache/cookbooks/config_test/recipes/default.rb:12:in from_file' [2013-06-24T19:50:38+00:00] DEBUG: filtered backtrace of compile error: /var/chef/cache/cookbooks/config_test/recipes/default.rb:19:in[]',/var/chef/cache/cookbooks/config_test/recipes/default.rb:19:in block in from_file',/var/chef/cache/cookbooks/config_test/recipes/default.rb:12:infrom_file' [2013-06-24T19:50:38+00:00] DEBUG: backtrace entry for compile error: '/var/chef/cache/cookbooks/config_test/recipes/default.rb:19:in `[]'' [2013-06-24T19:50:38+00:00] DEBUG: Line number of compile error: '19' Recipe Compile Error in /var/chef/cache/cookbooks/config_test/recipes/default.rb TypeError can't convert String into Integer Cookbook Trace: /var/chef/cache/cookbooks/config_test/recipes/default.rb:19:in []' /var/chef/cache/cookbooks/config_test/recipes/default.rb:19:inblock in from_file' /var/chef/cache/cookbooks/config_test/recipes/default.rb:12:in `from_file' Relevant File Content: /var/chef/cache/cookbooks/config_test/recipes/default.rb: 12: template "/opt/env/test.cfg" do 13: source "test.erb" 14: action :create_if_missing 15: mode 0664 16: owner "root" 17: group "root" 18: variables({ 19 :pepe1 = data1['part.name'], 20: :pepe2 = data2['transport.tcp.ip2'] 21: }) 22: end 23: I tried many things and if I comment out "pepe1 = data1['part.name'],", then :pepe2 = data2['transport.tcp.ip2'] works fine. only nested data "part.name" cannot be set to @pepe1. Does anyone knows why I receive the errors? thanks,

  Read the article

• What do I need in order to extract and combine text files from multiple ZIP files, via command line?

  - by Iszi

  I've got an interesting scripting challenge in front of me. I'm fairly certain there's a way to do it, but I feel like I'm probably lacking some particular tools and/or functional knowledge. There's some fifty-plus ZIP files that each contain, among other things, text files that need to be merged with one another. The structure is something like this: C:\Reports\FirstJob-1.zip |-MyName |-FirstJob |-1 |-[Some other folders] |-TXTReports |-English |-[Some other files] |-Report.txt C:\Reports\FirstJob-2.zip |-MyName |-FirstJob |-1 |-[Some other folders] |-TXTReports |-English |-[Some other files] |-Report.txt C:\Reports\SecondJob-1.zip |-MyName |-SecondJob |-1 |-[Some other folders] |-TXTReports |-English |-[Some other files] |-Report.txt If I had all the Report.txt files in one regular folder, and uniquely named, I could probably just write a FOR statement that targets *.txt and runs something like type filename.txt >> Consolidated.txt on each. However, these all have the same file name and are embedded deep within separate ZIP files. The potentially useful tools I currently have at my disposal are Windows XP Professional SP3, PowerShell, and WinZip. I'd rather not download or install anything else, but I do understand that third-party tools (or additional tools from Microsoft or WinZip) may be necessary. Whatever tools I use should run natively in Windows. I really don't want to have to mess with Cygwin or other emulators on this system. At the very least, I need a tool that will allow me to analyze and manipulate ZIP files from the command line. Also, are there any other particular complications to this that I've not yet thought of?

  Read the article

• Emails from web site sometimes blank or gibberish

  - by John Gardeniers

  Our company has one web site with an online store based on osCommerce. The system sends emails for various reasons, such as password changes, order confirmations, etc., using PHP's mail() function. We occasionally have customers report that the email they received is either blank (email is plain text format) or gibberish (email is in HTML format). In the latter case it's really just HTML that's being displayed as raw text but of course the customers can't read it. In this case the first opening tag's <, and sometimes a few more characters, has gone missing. In an attempt to determine whether this was happening only for certain customers or email systems I configured the web site to send a CC of each message to a service account at my end. Those CC'd messages always arrive intact and display correctly in Outlook. For what it's worth, it seems to happen a little more frequently to Hotmail users but is certainly not limited to them. As the web site is on a shared (Debian) host there's precious little I can do about debugging things from that end, although if I made the right request I feel the hosting company staff would help me, even though they have limited resources to spend on such matters. Any suggestions on what else I might do to try and determine just why those emails are not being received correctly by some customers, yet a CC copy arrives just fine?

  Read the article

• Setup site folders on Apache and PHP

  - by Cobus Kruger

  I'm trying to set up my first Apache server on my Windows PC at home and I have real trouble finding out which configuration settings go where. I downloaded and installed XAMPP which seemed to get everything nicely set up and can see a working website on http://localhost. So far so good. The point of this is to develop a website of course, and to make my life easier (irony?), I wanted to let the web site root point to my Eclipse project folder. So I opened httpd-vhosts.conf, uncommented a VirtualHost block and changed its DocumentRoot to my local path. Now when I try to load http://localhost I get a 403 (Access denied) error. So where do I configure permissions for my folder? And is that all I need to let my site run from the folder specified or am I going to have to clear another hurdle? Update: I tried to simplify things a little, so I reinstalled XAMPP and got back to a working http://localhost. Then I confirmed that httpd-vhosts.conf is included in httpd.conf and made the following changes to httpd-vhosts.conf: Uncommented the line NameVirtualHost *:80 Added a virtual host shown below. Restarted Apache and saw the expected page on http://localhost <VirtualHost *:80> DocumentRoot "C:/xampp/htdocs/" ServerName localhost ErrorLog "logs/dummy-host2.localhost-error.log" CustomLog "logs/dummy-host2.localhost-access.log" combined </VirtualHost> I then created a new folder named C:\testweb, added an index.html file and changed the DocumentRoot line shown above. For all intents and purposes I would then expect the two configurations to be equivalent. But this setup gives me an error 403. Even though the C:\testweb folder already had the same permissions as the C:\xampp\htdocs folder, I then went further and gave the Everyone group full control of C:\testweb and got exactly the same problem. So what did I miss?

  Read the article

• Songbird looping my library playlist

  - by Logi

  I'm using Songbird (on Windows) as my iTunes replacement. There's two things that annoy me about Songbird: 1) It has a web browser built in. I can ignore this as I don't use it. But, seriously, a web browser? :/ 2) It loops my library. This, I don't like. The way I play my audio is by launching Windows Explorer, navigating to my media library and double clicking on a single MP3. I only want to hear that one MP3. I don't use the Media Import function in Songbird - Or any other media player. But it insists on adding every song I play to the Library. Disabling this would be excellent but, falling short of that, I'd at least like to stop it repeating every song in the library. When Songbird finishes playing the last song in the Library (which is the song I just opened via Windows Explorer (gets appended to the library)), it jumps to the top of the library and starts playing all the songs again. How can I stop this? Songbird is set to 'Repeat none'

  Read the article

• How to deal with job that stop and cannot continue unless made foreground?

  - by Vi

  Recent example: mountlo (using UML): vi@vi-notebook:~/b$ mountlo -m 16 -d /dev/uba1 /home/vi/mnt/usb -t vfat -o iocharset=utf8,allow_other& [1] 32561 vi@vi-notebook:~/b$ Checking that ptrace can change system call numbers...OK Checking syscall emulation patch for ptrace...OK Checking advanced syscall emulation patch for ptrace...OK Checking PROT_EXEC mmap in /tmp...OK Checking for the skas3 patch in the host: - /proc/mm...not found - PTRACE_FAULTINFO...not found - PTRACE_LDT...not found UML running in SKAS0 mode [1]+ Stopped mountlo -m 16 -d /dev/uba1 /home/vi/mnt/usb -t vfat -o iocharset=utf8,allow_other vi@vi-notebook:~/b$ bg [1]+ mountlo -m 16 -d /dev/uba1 /home/vi/mnt/usb -t vfat -o iocharset=utf8,allow_other & [1]+ Stopped mountlo -m 16 -d /dev/uba1 /home/vi/mnt/usb -t vfat -o iocharset=utf8,allow_other vi@vi-notebook:~/b$ bg [1]+ mountlo -m 16 -d /dev/uba1 /home/vi/mnt/usb -t vfat -o iocharset=utf8,allow_other & [1]+ Stopped mountlo -m 16 -d /dev/uba1 /home/vi/mnt/usb -t vfat -o iocharset=utf8,allow_other vi@vi-notebook:~/b$ bg [1]+ mountlo -m 16 -d /dev/uba1 /home/vi/mnt/usb -t vfat -o iocharset=utf8,allow_other & [1]+ Stopped mountlo -m 16 -d /dev/uba1 /home/vi/mnt/usb -t vfat -o iocharset=utf8,allow_other vi@vi-notebook:~/b$ fg mountlo -m 16 -d /dev/uba1 /home/vi/mnt/usb -t vfat -o iocharset=utf8,allow_other Linux version 2.6.15 (miko@dorka) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #1 Mon Feb 27 13:27:52 CET 2006 (normal output) ... vi@vi-notebook:~/b$ socat - exec:'mountlo -m 16 -d /dev/uba1 /home/vi/mnt/usb -t vfat -o iocharset=utf8\,allow_other',pty,ctty fusermount: waitpid: No child processes vi@vi-notebook:~/b$ Also happens with Gimp (when it does run it's plug-ins). Parts of Gimp started by `gimp q.jpg&' freeze and cannot continue unless "killall -CONT" or made foreground. Is it a bug? How to reliably start things in a background?

  Read the article

• Recommended programming language for linux server management and web ui integration

  - by Brendan Martens

  I am interested in making an in house web ui to ease some of the management tasks I face with administrating many servers; think Canonical's Landscape. This means doing things like, applying package updates simultaneously across servers, perhaps installing a custom .deb (I use ubuntu/debian.) Reviewing server logs, executing custom scripts, viewing status information for all my servers. I hope to be able to reuse existing command line tools instead of rewriting the exact same operations in a different language myself. I really want to develop something that allows me to continue managing on the ssh level but offers the power of a web interface for easily applying the same infrastructure wide changes. They should not be mutually exclusive. What are some recommended programming languages to use for doing this kind of development and tying it into a web ui? Why do you recommend the language(s) you do? I am not an experienced programmer, but view this as an opportunity to scratch some of my own itches as well as become a better programmer. I do not care specifically if one language is harder than another, but am more interested in picking the best tools for the job from the beginning. Feel free to recommend any existing projects that already integrate management of many systems into a single cohesive web ui, except Landscape (not free,) Ebox (ebox control center not free) and webmin (I don't like it, feels clunky and does not integrate well with the "debian way" of maintaining a server, imo. Also, only manages one system.) Thanks for any ideas! Update: I am not looking to reinvent the wheel of systems management, I just want to "glue" many preexisting and excellent tools together where possible and appropriate; this is why I wonder about what languages can interact well with pre-existing command line tools, while making them manageable with a web ui.

  Read the article

• Gmail and FB is not rendering properly in Firefox

  - by Andy

  I am unable read Gmail in my Firefox browser on my laptop. However, there are no problems when I try to access Gmail on my office desktop. In fact, Gmail renders fine on IE on both computers. Things I have tried: Uninstalling and reinstalling Firefox. Using Firefox 3.6.26 and Firefox 10; same problem. Clearing the cache. But all to no avail. For starters: My background image does not get loaded. It says "Oops. Your selected image failed to load". The buttons for the new look do not get rendered, but when I do a mouse-over I see text which helps me navigate. When I try to read a message, I see the subject line and I see the reply / forward box. The message body does not get rendered, it seems like a styling error. Check this screenshot where the icons in the GMail new look are not rendered properly Check this screenshot where even facebook is not getting rendered properly EDIT: 25th Feb 2012 GMAIL is getting rendered fine in the old look

  Read the article

• Can't Connect To Local Mysql Using IP Address, but CAN connect from remote server

  - by user1782041

  Here's an interesting one that does not seem to fall into any of the mysql connection issues I've read about or searched for: On an Ubuntu 12.04 box I had some system updates waiting to install, and I took care of that this evening. After the install, I started seeing some errors in my syslog complaining about a particular php script that could no longer connect to the mysql instance on the box. Here is the specific error: PHP Warning: mysql_connect(): Can't connect to MySQL server on '192.168.0.40' (4) Now, the server's IP address is 192.168.0.40, and I've checked to make sure that I have mysql listening on 0.0.0.0 so that I can connect using either "localhost" or "192.168.0.40". Here's where things get odd: From the local machine, if I try the following: mysql -uroot -p -h192.168.0.40 I get this error: ERROR 2003 (HY000): Can't connect to MySQL server on '192.168.0.40' (110) I've checked, and error 110 indicates an OS timeout, and error 2003 is the mysql generic "can't connect" error. This indicates that it is not permissions with the user. However, if I do the same thing from a remote machine (say, from 192.168.0.30), I log right in with no problems. Futher, other scripts on the local machine that connect to mysql using "localhost" for the host rather than "192.168.0.40" connect with no problems. Also, I can connect via the mysql socket with no problems both from the command line and php scripts. So, this feels like a networking issue of some kind on the local box, but there are no iptables rules on this box (it is firewalled externally) and I can't figure out what else may be causing this. This problematic script worked perfectly prior to the latest system update. For now, I'll simply change the script to connect via localhost, but I'd really like to know why it broke for 2 reasons: There may be other scripts that connect using 192.168.0.40 that don't run very often which are now broken. Auditing them all will take more time than I feel like devoting at the moment. I'm curious, and want to know why it broke so I can fix it correctly. Any help?

  Read the article

• Unable To Successfully Use Java Anywhere (Windows 7 64bit)

  - by Nathan Smith

  This is a bit of an odd issue: (This is with JRE 7u7 32bit.) New Lenovo W530 laptop, everything is shiny. I tried to use a java applet for the first time recently (in Chrome). I got the Java logo and it started spinning like it was going to load, but didn't get anywhere and the browser locked up. I tried IE. Same deal. Tried Firefox. Same deal. So, I did the usual things: Rebooted, nothing. Un-installed Java, rebooted, re-installed, nothing. Tried it installing a 64bit Java as well. Same thing. I tried JRE6. Same thing. I uninstalled and manually deleted all the registry entries I could find related to it, then re-installed. Same thing. I un-installed and used the JavaRa utility. Same exact thing. I've not been able to use web applets or desktop stuff (minecraft), until yesterday. I did a graphics driver update and I was able to play minecraft for small amounts of time. It crashed regularly and wouldn't start reliably. No change in web applets. I'm at my wits end here. I'm to the point where reformatting is my only option. If anyone has any ideas at all, that would be awesome.

  Read the article

• ScreenOS MIP selection for outbound connections

  - by David Mackintosh

  Given a ScreenOS 6.3.0 firewall with this configuration: unset flow reverse-route clear-text set interface "ethernet0/0" zone "Trust" set interface ethernet0/0 ip 192.168.1.1/24 set interface ethernet0/2 ip 10.0.0.1/24 set interface ethernet0/2 mip 10.9.9.10 host 192.168.1.10 netmask 255.255.255.255 vr trust-vr set interface ethernet0/2 mip 10.8.8.10 host 192.168.1.10 netmask 255.255.255.255 vr trust-vr set route 0.0.0.0/0 interface ethernet0/2 gateway 10.0.0.254 ... (and assuming appropriate policies) is there a way to control which MIP the firewall selects for outbound connections initiated by 192.168.1.10? (presumably because I want the upstream 10.0.0.254 to do different things with the packet depending on what its source IP is). Update: OK, my scenario is this: I have two ISP uplinks, each giving me a different IP space. Each ISP will only route the IP space they have assigned me. So in order for the server to be reachable by both ISPs, I need two MIPs for the same server, one on each interface. Inbound traffic will work fine with the 'unset flow reverse-route clear-text' option in use. But for outbound (think an email server sending a message) I need a way to select an appropriate MIP depending on which outbound link I want the system to use, and I want this to be resiliant so that if the link the firewall prefers goes down overnight I don't have to manually flip something to keep the mail flowing. Basically I'm trying to avoid having to buy a link-balancer appliance (or two since I'll need a cluster). Is there a way to do this?

  Read the article

• F5 Networks iRule/Tcl - Escaping UNICODE 6-character escape sequences so they are processed as and r

  - by openid.malcolmgin.com

  We are trying to get an F5 BIG-IP LTM iRule working properly with SharePoint 2007 in an SSL termination role. This architecture offloads all of the SSL processing to the F5 and the F5 forwards interactive requests/responses to the SharePoint front end servers via HTTP only (over a secure network). For the purposes of this discussion, iRules are parsed by a Tcl interpretation engine on the F5 Networks BIG-IP device. As such, the F5 does two things to traffic passing through it: Redirects any request to port 80 (HTTP) to port 443 (HTTPS) through HTTP 302 redirects and URL rewriting. Rewrites any response to the browser to selectively rewrite URLs embedded within the HTML so that they go to port 443 (HTTPS). This prevents the 302 redirects from breaking DHTML generated by SharePoint. We've got part 1 working fine. The main problem with part 2 is that in the response rewrite because of XML namespaces and other similar issues, not ALL matches for "http:" can be changed to "https:". Some have to remain "http:". Additionally, some of the "http:" URLs are difficult in that they live in SharePoint-generated JavaScript and their slashes (i.e. "/") are actually represented in the HTML by the UNICODE 6-character string, "\u002f". For example, in the case of these tricky ones, the literal string in the outgoing HTML is: http:\u002f\u002fservername.company.com\u002f And should be changed to: https:\u002f\u002fservername.company.com\u002f Currently we can't even figure out how to get a match in a search/replace expression on these UNICODE sequence string literals. It seems that no matter how we slice it, the Tcl interpreter is interpreting the "\u002f" string into the "/" translation before it does anything else. We've tried various combinations of Tcl escaping methods we know about (mainly double-quotes and using an extra "\" to escape the "\" in the UNICODE string) but are looking for more methods, preferably ones that work. Does anyone have any ideas or any pointers to where we can effectively self-educate about this? Thanks very much in advance.

  Read the article

• Problem with wireless networking

  - by Rodnower

  Hello, I have atheros wifi hardware, intell chipset, gigabyte laptop and CentOS 5 installed. Now I try to use wireless network and get problems. First of all I want to say that I have 2 OS on my laptop, and when I load Windows XP I still may to access to the wireless network. First I try to get it on Linux was to make active wlan0 interface in: system - administration - network but I get: Determining IP information for wlan0... failed. Second I try also was unsuccessfully: [root 1 network-scripts]# ifup-wireless Error : unrecognised wireless request "off" This relevant output of iwconfig is: Warning: Driver for device wlan0 recommend version 21 of Wireless Extension, but has been compiled with version 20, therefore some driver features may not be available... wlan0 IEEE 802.11 ESSID:"" Mode:Managed Frequency:2.462 GHz Access Point: Not-Associated Tx-Power=27 dBm Retry min limit:7 RTS thr:off Fragment thr=2352 B Encryption key:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 {output not in the original format} The same things are happen even if I do: modprobe wlan0 (this not get error) Important to say that modprobe not succeed to find ath_pci, tharefor I decide to download latest version of the madwifi driver from http://madwifi-project.org. I extracted this, but when I make this, this is what I get: [root 1 madwifi-0.9.4]# make /bin/sh: line 0: cd: /lib/modules/2.6.18-164.el5/build: No such file or directory Makefile.inc:66: * /lib/modules/2.6.18-164.el5/build is missing, please set KERNELPATH. Stop. I tried to set KERNELPATH, but I think that it was incorrect: [root 1 madwifi-0.9.4]# make KERNELPATH=/lib/modules/2.6.18-164.el5/kernel/ /bin/sh: cc: command not found Makefile.inc:81: * Cannot detect kernel version - please check compiler and KERNELPATH. Stop. Some one have any ideas? Thank you very much for ahead.

  Read the article

• Dell PE2950 - slow IO rates for writing and reading locally

  - by OrenM

  I'm having a serious issue with dell server PE2950. The server has really slow IO rates, so slow that I'm not able to use it anymore I tried few things to solve this: changing disks to new disks (configured them as raid1) changing perc card + perc cables reinstalling the OS of course, had to cause of changing of disks, centos 5.5 x64bit firmware update to everything virtual disks policy: No Read Ahead,Write Back, disk cache policy disabled. openmanage doesn't alert about anything, also i ran dell's diag tests, everything passed, also dell didn't see anything in deset log. dell offered to reseat everything, including the cpu, we did that as well, still io rates are slow I have several PE2950 servers, and I never had such a thing with any of those. All have similar or exact hardware as this one, all configured the same, with the same os centos 5.5 x64, same disks, same raid, same policy. Just for comparison: the problematic PE2950 server: [root@bad ~]# time sh -c "dd if=/dev/zero of=/tmp/ddfile bs=8k count=200000 && sync" 200000+0 records in 200000+0 records out 1638400000 bytes (1.6 GB) copied, 27.7946 seconds, 58.9 MB/s real 0m33.968s user 0m0.531s sys 0m26.000s good PE2950 server (with the exact same hardware): [root@good ~]# time sh -c "dd if=/dev/zero of=/tmp/ddfile bs=8k count=200000 && sync" 200000+0 records in 200000+0 records out 1638400000 bytes (1.6 GB) copied, 3.19999 seconds, 512 MB/s real 0m7.694s user 0m0.053s sys 0m4.057s Hopefully you will have an idea what can cause the problem.

  Read the article

• ubuntu: Installed php-mcrypt but it doesn't show up in phpinfo()

  - by jules

  A web app I'm trying to install on my ubuntu 10.04 LTS requires mcrypt, and is generating this error: Fatal error: Call to undefined function mcrypt_module_open(). I know this is the same question as this one: Installed php-mcrypt but it doesn't show up in phpinfo(), but I tried several things, none of which worked, and have additional questions. I would comment on the original thread but don't have enough reputation to do so; forgive me for the duplicate question. My versions of php and mcrypt are (both installed via apt-get): php: 5.3.2-1ubuntu4.10 mcrypt: 5.3.2-0ubuntu Doing a php -m shows that the mcrypt module is installed. I installed mcrypt and php5-mcrypt via apt-get. Also, I'm using nginx as my web server. I have tried reinstalling mcrypt and restarting nginx, but still can't get mcrypt to show up on phpinfo() and calls to mcrypt are still broken. Here is some more info: $ php -i | grep "mcrypt" /etc/php5/cli/conf.d/mcrypt.ini, mcrypt mcrypt support => enabled mcrypt.algorithms_dir => no value => no value mcrypt.modes_dir => no value => no value I also checked that mcrypt is on in /etc/php5/cli/conf.d/mcrypt.ini and /etc/php5/cgi/conf.d/mcrypt.ini. Lastly, I'm using fastCGI with nginx. I googled around and saw suggestions to restart php5-fpm. I couldn't find php5-fpm in apt-get, I'm not sure if I still need php5-fpm since I already have fastCGI. Is there anything else I'm missing?

  Read the article

• Centralized Windows/Mac Patch Management that is easy to use

  - by BiggsTRC

  I'm looking for advice on what patch management solutions you would recommend based upon your experience. I'm also looking for which ones you would not recommend based upon your experience. We have a mixed network of Windows and Mac clients. Our central servers are all Windows servers, although I have considered putting in a Mac server to better handle our Mac clients. The issue we are facing currently is that we need to maintain the patches on all of our third-party applications. Right now we use WSUS, which handles with patching of Windows and some Microsoft products but that is about it. I need something to cover the other applications, specifically things like Adobe products (Reader, Flash, Dreamweaver, etc.) Our network isn't that big (maybe 200 clients) and I don't have a person to dedicate just to patching and maintaining a patch management solution. Thus very large and complicated solutions like System Center are most likely out. I have recently been looking at Dell's Kace K1000 solution (http://www.kace.com/products/systems-management-appliance/). It seems simple and it provides a lot of tools in one package that I would like/need as well. I like the fact that it is self-contained in an appliance and that it is designed for solutions like mine. However, I'm not sure if this is the best solution. I've also looked some at Shavlik's Netchk solution (http://www.shavlik.com/netchk-protect.aspx) but I don't need an anti-virus product. However, it looks like they might have a very good patch database. My question is this: What are your thoughts on these to products? Are there better products out there? Are there issues that I'm not considering? I want something that is very good at patching a broad range of products, that is simple to use, that takes a minimal amount of management (like WSUS), and that (hopefully) works with Mac and Windows.

  Read the article

• Erase just the free space on my hard drive

  - by Patriot

  I'm about to give away an older computer with just the Windows XP operating system intact and all other programs uninstalled. However, upon peeking at the "free space" with software called "Recuva", I notice lots of deleted things that could be recoverable. Some of these include sensitive data files, pdfs, and other personal items that I would not want retrieved. I ran a program called "Eraser" to try and overwrite that data, but it failed to do an adequate job. I also tried to do the job with "Glary Utilities" but it failed too. Short of installing a new, very cheap hard drive and re-installing the bare bones operating system, I'm out of ideas. EDIT - WOW!!! I was not really expecting this many GREAT ideas. My next question is this. If I go the DBAN route and truely wipe the hard drive, then restore my disc image (I use Acronis True Image) will it also restore the free space data? Does imaging just copy readable data? I have an old image of when the OS was first installed.

  Read the article

• Can I run a mix of static addressing and NAT?

  - by aroth

  Let's say that an ISP offers a plan with 5 static IP addresses, but I have more than 5 devices, many of which (such as a networked printer, for instance) I do not want or need to have a static IP address. So the topography I'm planning goes something like: ISP -> Router -> Switch -> Computer (static address) -> Computer (static address) -> Printer (DHCP/NAT) -> Tv (DHCP/NAT) -> (...) -> Wireless Devices (DHCP/NAT) Generally speaking, is it possible to run a network like that? If not, then what sort of setup do I need so that I can assign static addresses just to the things that need them, and use DHCP/NAT for everything else? Also, what internal networking devices will consume a static IP address? I'm pretty sure the router will, correct? Does the switch also?

  Read the article

• Windows 7 on an EEE PC 901 - Is it a practical change?

  - by Dave

  I am currently running WinXP on my EEE PC 901, and I'm happy to say that it runs really well. But this did not come with out significant manipulation of the OS. Here's the basic steps I took: Install XP Modify registry to install Install bare essential drivers Relocate page file to d:\ (remember, this model has two SSD's, one roughly 3.6gb, and the other roughly 16gb - XP won't run on the bigger drive, only the smaller one) Install remaining drivers skip normal updates, install service pack 2 straight away. modify system registry to place service pack backup folder into new Program Files directory on D drive (where software is being installed). Change My Documents folder to sit on D drive. Install .net framework Install remaining updates and service pack 3 (the hidden backup folders in the c:\Windows directory are deleted after every update as well as the contents of the service pack downloads folder in order to continually free up space). I have also found that Disktrix UltimateDefrag to be brilliant at keeping the system clean and tidy. This is roughly the order I did things in. In this configuration the machine works really well. QUESTION: Can this kind of configuration be implemented with Windows 7 to achieve the same result on this machine? Thanks in advance. Dave.

  Read the article

• How can I do an SELINUX filesystem relabel without rebooting first?

  - by Skaperen

  I can touch the file /.autorelabel and reboot and during the initialization coming back up it will do the SELINUX relabel for me. But I want to do this in a different situation where the system has just been copied to a hard drive image. I can chroot to the originating file tree, or chroot to the just populated device image and run it. I just can't find anything that says what to be run. This image is being made into an AMI on AWS EC2, and contains CentOS 6.3. But the time it takes to relabel is too long (6 minutes or more). I want to move the relabel to the image build where the extra time is not an issue (because it happens once instead of every time an AMI is launched). I can make this relabel be the very last thing just before the filesystem is unmounted for the last time until it becomes an AMI and will launch. I just need to know what to call to do it. I have searched man pages with no luck. I have searched system init scripts but where /.autorelabel is detected, it is unclear what is happening. Documents like http://www.centos.org/docs/5/html/5.2/Deployment_Guide/sec-sel-fsrelabel.html only tell how to do things that still really do the work after a reboot. I need to have the work doing BEFORE the "reboot" (unmount, build AMI, and launch ready to go). The big point is ... yes there will be a reboot ... but I want the relabel work to be done before that so it won't be done every time an AMI is launched (because it takes so long).

  Read the article

• Running multiple services on different servers with IPv6 and a FQDN

  - by Mark Henderson

  One of the things NAT has permitted us to do in the past decade is split physical services onto different servers whilst hiding behind a single interface. For example, I have example.com behind a NAT on 192.0.2.10. I port-forward :80 and :443 to my web server. I'm also port forward :25 to my mail server, and :3389 to a terminal server and :8080 to the web interface of my computer that downloads torrents, and the story goes on. So I have 5 port forwardings going to 4 different computers on example.com. Then, I go and get me some neat IPv6. I assign example.com an IPv6 address of 2001:db8:88:200::10. That's great for my websites, but I want to go to example.com:8080 to get to my torrents, or example:3389 to log on to my terminal server. How can I do this with IPv6, as there is no NAT. Sure, I could create a bunch of new DNS entries for each new service, but then I have to update all my clients who are used to just typing example.com to get to either the website or the terminal server. My users are dumber than two bricks so they won't remember to connect to rdp.example.com. What options do I have for keeping NAT-style functionality with IPv6? In case you haven't figured it out, the above scenario is not a real scenario for me, or perhaps anyone yet, but it's bound to happen eventually. You know, with devops and all.

  Read the article

• Puppet and Vim fighting over Ruby version

  - by devians

  I have installed puppet from the .dmg from puppetlabs. If I remove ruby 1.9.3, puppet works, but other things like my vim install (dependant plugins) do not. According to http://docs.puppetlabs.com/guides/platforms.html#ruby-versions 1.9.3 is supported. So whats going wrong with puppet? % uname -a Darwin Kusanagi.local 11.4.2 Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64 x86_64 % which ruby /usr/local/bin/ruby % ruby --version ruby 1.9.3p327 (2012-11-10 revision 37606) [x86_64-darwin11.4.2] % /usr/bin/ruby --version ruby 1.8.7 (2012-02-08 patchlevel 358) [universal-darwin11.0] % brew info ruby 1 ? ruby: stable 1.9.3-p327, HEAD http://www.ruby-lang.org/en/ Depends on: pkg-config, readline, gdbm, libyaml /usr/local/Cellar/ruby/1.9.3-p327 (796 files, 17M) * https://github.com/mxcl/homebrew/commits/master/Library/Formula/ruby.rb ==> Options --with-tcltk Install with Tcl/Tk support --with-suffix Suffix commands with "19" --universal Build a universal binary --with-doc Install documentation ==> Caveats NOTE: By default, gem installed binaries will be placed into: /usr/local/Cellar/ruby/1.9.3-p327/bin You may want to add this to your PATH. % puppet /usr/local/Cellar/ruby/1.9.3-p327/lib/ruby/1.9.1/rubygems/custom_require.rb:36:in `require': cannot load such file -- puppet/util/command_line (LoadError) from /usr/local/Cellar/ruby/1.9.3-p327/lib/ruby/1.9.1/rubygems/custom_require.rb:36:in `require' from /usr/bin/puppet:3:in `<main>'

  Read the article

• Powershell: Execute exe on remote server and capture output

  - by user364825

  I am trying to script the execution of an installer on remote web servers. The installer in question is also a Windows Service that hosts NServiceBus. If RDP'd into the server, the application is installed by the following command: &"$theInstaller" /install /serviceName:TheServiceName The installer prints output about its progress registering the service and connecting to the database to stdout, among other things. This works fine from an RDP session, but when I execute it remotely via PS, I get a you-can't-do-this-over-the-network message if I execute it directly or via Invoke-Command -computername $theRemoteServer: System.IO.FileLoadException: Could not load file or assembly 'file://\\theRemoteServer\c$ \thePath\AutoMapper.dll' or one of its dependencies. Operation is not supported. (Exception from HRESULT: 0x80131515) --- System.NotSupportedException: An attempt was made to load an assembly from a network location which would have caused the assembly to be sandboxed in previous versions of the .NET Framework. This release of the .NET Framework does not enable CAS policy by default, so this load may be dangerous. If this load is not intended to sandbox the assembly, please enable the loadFromRemoteSources switch. See http://go.microsoft.com/fwlink/?LinkId=155569 for more information. (Note: I added an additional "\" to the path in the first line in order to get it to show up correctly in the preview on this site.) This, and other DLLs, are loaded by the service, and the service's execution context cannot, apparently, be remotified. I have also tried using Invoke-WmiMethod, which does something, but it's not clear what, and the output from the installer is lost: Invoke-WMIMethod win32_process create '"$theInstaller" /install /serviceName:TheServiceName' -ComputerName $server (with and without cmd.exe /k before the intaller reference): __GENUS : 2 __CLASS : __PARAMETERS __SUPERCLASS : __DYNASTY : __PARAMETERS __RELPATH : __PROPERTY_COUNT : 2 __DERIVATION : {} __SERVER : __NAMESPACE : __PATH : ProcessId : ReturnValue : 9 How does one remotely execute such an EXE and capture the output? Thanks!

  Read the article

< Previous Page | 550 551 552 553 554 555 556 557 558 559 560 561  | Next Page >