Search Results

Search found 25660 results on 1027 pages for 'booting issue'.

Page 555/1027 | < Previous Page | 551 552 553 554 555 556 557 558 559 560 561 562  | Next Page >

• Sorting out mSSD acceleration on a Acer M3-581TG

  - by PhonicUK

  I recently purchased a Acer Timeline M3 Ultra, it ships with a 500GB HDD and a 20GB mSSD to use as a cache. First thing I did when I got it was format the drives and install a clean OS (on the HDD, the mSSD has nothing on it) - but now I can't figure out how everything needs to be configured in order to use the mSSD as a cache, it just looks like a standard storage drive. I've poked around in the BIOS and there is a SATA mode setting, but it only has one option (AHCI), most of the documentation I've seen on the subject says that the SATA controller needs to be in RAID mode otherwise 'Acceleration' isn't visible in the Intel SRT menu (which for me, it isn't) I've seen a few things that suggest I just need the correct partition layout, I tried this using fdisk from a Linux LiveCD but got nowhere. Any ideas? The laptop shipped with no recovery media so I'm marginally stumped. I don't have any issue with reformatting again if required.

  Read the article

• ATI Radeon Triple Monitor Setup

  - by Zak

  I have a Dell XPS 8300, and its got an ATI Radeon HD6450 installed. When running Ubuntu 12.04 the triple monitors work flawlessly. I can change the default, turn them on/off etc ... The problem is Windows 7. It is behaving much like in this thread. I know the card supports three, as it WORKS PERFECTLY in the linux portion of my dual boot. Windows can "see" all three, but will only allow two. Is this a WIndows 7 / ATI compatibility issue, or is Windows 7 just stupid (rhetorical)? Had I not had a dual boot Linux box, I might have read the above thread and thought "damn, it just won't work". But I use three monitors every day on this card, so I know it works.... Just not with Windows.

  Read the article

• Very large log files, what should I do?

  - by Masroor

  (This question deals with a similar issue, but it talks about a rotated log file.) Today I got a system message regarding very low /var space. As usual I executed the commands in the line of sudo apt-get clean which improved the scenario only slightly. Then I deleted the rotated log files which again provided very little improvement. Upon examination I find that some log files in the /var/log has grown up to be very huge ones. To be specific, ls -lSh /var/log gives, total 28G -rw-r----- 1 syslog adm 14G Aug 23 21:56 kern.log -rw-r----- 1 syslog adm 14G Aug 23 21:56 syslog -rw-rw-r-- 1 root utmp 390K Aug 23 21:47 wtmp -rw-r--r-- 1 root root 287K Aug 23 21:42 dpkg.log -rw-rw-r-- 1 root utmp 287K Aug 23 20:43 lastlog As we can see, the first two are the offending ones. I am mildly surprised why such large files have not been rotated. So, what should I do? Simply delete these files and then reboot? Or go for some more prudent steps? I am using Ubuntu 14.04.

  Read the article

• Gmail flagging emails as spam despite SPF being enabled and working perfectly

  - by Asif

  I have a website where people can recommend contents to their friends using their email. The issue is that emails are being flagged as spam whereas if I do the same from my development machine things are working out fine. I have enabled SPF and it is perfect. When sending through website, the email appears as this in Gmail Inbox: From [email protected] to [email protected]. When I send it from my development machine it appears as : From xyz.com via mywebsite.com to [email protected] mailed by mywebsite.com and this is exactly how I envisioned it. From what little I could figure out by looking at the source of emails in Gmail is that when sending from my development machine Gmail correctly recognizes my domain as mywebsite.com for which SPF is enabled and hence it treats it as genuine email. Whereas Gmail recognizes my domain as [email protected] when sent through the website. Can someone tell me why it does so? Any help would be really appreciated.

  Read the article

• Where to obtain openssl-devel for SunOS 5.10

  - by user35949

  So I am having an issue that I have seen other people have on many different systems. I have to build Subversion on a SunOS 5.10 box and have run into issues. I have the openssl source code installed and in the subversion-1.6.9 folder, I run the following: ./configure --with-ssl --with-libs=/opt/exp/lib/openssl/lib and receive the error: checking for library containing RSA_new... not found configure: error: could not find library containing RSA_new configure failed for neon I have also tried running the command without the "lib" on the end of the --with-libs path. I read online that I need the openssl-devel packages, but I have been unable to find them for SunOS 5.10, and they do not show up already installed on my system when running pkginfo. I have looked online including http://www.sunfreeware.com/ which I was told was a good SunOS software source. Any help you can provide would be welcomed. Thanks, Sean

  Read the article

• Limiting the speed of the mouse cursor

  - by idlewire

  I am working on a simple game where you can drag objects around with the mouse cursor. As I drag the object around quickly, I notice there is some juddering, which seems to be due to the fact that I can move the mouse cursor faster than the game's update/draw. So, although I maintain the offset from where the player initially clicked on the object, the mouse's relative position to the object shifts around slightly before settling as I move the object very quickly. The only way I have found to get smooth, exact 1:1 movement is if I turn both IsFixedTimeStep and SynchronizeWithVerticalRetrace to false. However, I'd rather not have to do that. I have also tried making a custom mouse cursor, hiding the real mouse, taking the real mouse delta and clamping it to a maximum speed. Here is the problem: In windowed mode, the "real" mouse cursor moves off the window while the custom mouse cursor (since it's movement is being scaled) is still somewhere inside the game window. This becomes bizarre and is obviously not desired, as clicking at this point means clicking on things outside the game window. Is there any way to accomplish this in windowed mode? In fullscreen mode, the "real" mouse cursor is bounded to the edges of the screen. So I get to a point where there is no more mouse delta, yet my custom cursor is still somewhere in the middle of the screen and hence can't move further in that direction. If I wanted to clamp it to the edge of the screen when the real cursor is at the edge, then I would get an abrupt jump to the edge of the screen, which isn't desired either Any help would be appreciated. I'd like to be able to limit the speed of the mouse, but also would appreciate help with the first issue (the non-smooth relative offset between mouse cursor movement and object movement).

  Read the article

• Interpolation between two 3D points?

  - by meds

  I'm working with some splines which define a path a character follows (you can see a gameplay video here to get a better understanding of what's going on: http://www.youtube.com/watch?v=BndobjOiZ6g). Basically the characters 'forward' look direction is set to the 'forward' direction of the spline and when players tilt their phone left and right the character is strafed along its 'right' coordinate. The issue with this is (rather obviously) in performance, interpolating over a spline to find the nearest position and tangent relative to the player is an incredibly costly operation. To get by this I cache a finite number of positions in what I call 'SplineDetails', the class is as follows: public class SplineDetails { public SplineDetails() { Forward = Vector3.forward; Position = Vector3.one * float.MaxValue; Alpha = -1; } public float Alpha; // [0,1] measured along length of spline where 0 is the initial point and 1 is the end point of the spline public Vector3 Position; // the point of the spline at this alpha public Vector3 Forward; // the forward tangent of the spline at this alpha } I populate this with say 30 coordinates and I can give a rough estimate of a coordinate and 'forward' based on a position past in. It's not as accurate but it's much faster. But now I'd like to make the system work better by estimating positions and 'forward' directions by interpolating between two of the cached points though I'm stuck trying to figure out some logic. My first problem is, how can I determine between which two points the object is? Given each point can be placed at different intervals along the spline it could mean that two points in front or behind the object can be closer to the object. The other problem is to figure out the proportion between the two paths it's between, i.e. if there is a point a at coordinate (0,0,0) and point b at coordinate (1,0,0) if the object is at position (0.5,0,0) then the result it should give is '0.5' (as it is equal distance away from point a and point b). That's a simple example, but what if the object is at coordinate (0.5,3,0) for example?

  Read the article

• How can I restrict a group to reading only two particular folders with Windows Server?

  - by Lord Torgamus

  I have a group of users on Windows Server 2003 who need to be able to read the contents of two directories but not be able to access anything else on the server (including read-only access). One of the directories is K:\projectFour\config — and the other is similarly formatted — so it would be okay for group members to be able to list the contents of K:\ and K:\projectFour\ but not actually read anything in those directories. I've found several resources via SF/Google, including how to restrict individual folders/drives and how to allow users to only run specific executables, but that information ultimately didn't solve my issue. Sorry if this is a really simple thing to do, I'm usually a developer and don't know the first thing about servers or group policies. Finally, I should mention that this isn't a fully concrete question, as it will be implemented eventually but I don't personally have a copy of Windows Server 2003 to test with right now.

  Read the article

• Citrix Error: Your user profile was not loaded correctly

  - by George

  We get this error from out citrix server: Your user profile was not loaded correctly! You have been logged on with a temporary profile. Changes you make to this profile will be lost when you log off. Please see the event log for details or contact your administrator. I am well aware there is a workaround by Citrix, that can be found here, but that doesn't permanently fix our issue. It seems to come back. Any idea why that happens? Any suggestions on how to fix it? Citrix version is 4.5 running on Windows 2003 x32 EDIT 14.IX.2012 @ 16.03 CT I am sorry, let me clarify, it happens to some users, not all and not all the time.

  Read the article

• Firefox: tabs containing a single image sometimes show generic icon instead of thumbnail

  - by ??O?????

  My version of Firefox is 3.5.9, but I've had this issue since single-image tabs started showing a thumbnail of the contained image. Typically, a tab containing a single image will use a thumbnail of the image as the icon before the tab title. Sometimes, though, this icon will be the generic “shaded sphere on blank page” (or perhaps whatever your theme defaults to). I'm guessing this happens whenever height or width is larger than 1024, but I seem to recall (perhaps erroneously) exceptions to this rule. Anyway, hopefully someone will know the definite answer to: Why does this happen? Examples Images showing thumbnails Wikipedia/Natalie Portman #1 (600×887) Wikipedia/Natalie Portman #2 (789×1024) Images not showing thumbnails Wikipedia/BMW series 3 cars (1276×338) Wikipedia/Greek temple (2414×1740)

  Read the article

• once VPNed into pfSense, unable to hit the public URLs of my websites - they are routed to the pfSense box

  - by Sean

  I have a pfSense box setup as the firewall/router/VPN appliance at my colo. Once I VPN into the colo (either pptp or openvpn, pptp preferred due to multiple clients and ease of configuration), I am able to hit all my servers by their private 10.10.10.x ip and am able to browse the public internet without issue. When I try and hit the URL of a domain hosted by one of my servers, I am prompted for credentials. If I login using the pfSense credentials, I'm connected to pfSense as if I'd used it's internal IP. If I hack my hosts file to point url - server private IP it works fine, but this is obviously not a good solution. To recap: not connected to VPN - www.myurl.com works connected to VPN - www.myurl.com never makes it to the correct server, but is sent only to the pfSense box I'm sure it's something small that I've missed in the pfSense config.

  Read the article

• What is the cheapest non-colocation way to serve about 10 static files at a rate of 100 megabits per

  - by Mark Maunder

  I've looked at Amazon S3 and it costs roughly $4746 per month for 100 megabits/s (which translates into 31,640 Gigabytes of data transferred. That's at a rate of $0.15 per gig.) I haven't found a cheaper "cloud" option. I'm curious if there's any other cloud hosting option out there cheaper than S3. Uptime is not an issue because I can build failover for most things into the browser. e.g. I can use javascript to say "if the image didn't load then go to this other URL instead." FYI I'm currently using a colocation facility which is about 30% cheaper than S3 and I'm familiar with colo prices - so this question is really about "cloud" services and by that I mean services where I don't have to worry about the infrastructure.

  Read the article

• Can't access dfs namespace over vpn

  - by cpf

  Hi Serverfault, I've recently configured 2 servers in AD on the same domain level. They are physically separated and permanently connected through a site-to-site vpn for dfs replication. All well, but when users connect to either site through vpn (from home e.g.) they can't use the domain level method: \\domain.com\data Internally this works perfectly, resolving domain.com when connected through vpn gets the correct IP. I've tried Google to figure things out. What I was able to find was that more people have this issue, no real solution found though. Can anyone explain why this is happening? Especially a solution would be really helpful! Thanks in advance.

  Read the article

• 27 days after domain transfer name servers not propogated

  - by Thom Seddon

  We recently bought the domain: embarrassingnightclubphotos.com 7 days after accepting the transfer the domain finally transferred to our registrar and we immediately changed the name servers from ns*.netregistry.net to amy.ns.cloudflare.com and cody.ns.cloudflare.com 20 days after changing the name servers, the majority of tests show that both old and new nameservers are still being reported: http://intodns.com/embarrassingnightclubphotos.com http://www.whatsmydns.net/#NS/embarrassingnightclubphotos.com We are now ready to launch the new site but this issue is plagueing us as a high proportion of the traffic is still receiving the old nameserves and so hitting the old server. You can tell if you have hit the old or new server as the old server has the value "A" for the meta tag "Location" and the new server has "U". (The old server just has an iframe too!) I have never had this problem before - who is causing this and how should we go about reaching a resolution? Thanks

  Read the article

• apache requests failing

  - by Josh

  I'm trying to figure out why sometimes the client fails to load objects/requests from a dynamic page served from Apache/MySql/Debian machine. Let's say 13 objects are to be loaded for a total of 185.3 KB load, with no external objects (no DNS lookups) and no other traffic at the same time, randomly some of those object do not load. However, if I perform a refresh, sometimes all of them load or some might fail again. I only have 1Mbps/up and my DNS is been hosted externally (everydns). What could be the reason of this issue? Any comments will be appreciated.

  Read the article

• Windows 7 on 1st Gen Macbook Pro (Q4-2008), power management problems.

  - by typemismatch

  I have the first generation macbook pro, purchased Q4 2008. I've been trying to run Windows 7 and can get it all installed great with the BootCamp 3.1 64 bit drivers however ... power management isn't great. The screen and keyboard don't automatically dim - the laptop gets too hot. I noticed on some newer macbook pros that windows 7 works perfectly and the above doesn't happen. Does anyone know if there really is a hardware issue with this 1st gen or is there some firmware update I can use to fix this? Thanks!

  Read the article

• Mac OS X app window is too large - how can I resize?

  - by Kyle Cronin

  I'm a MacBook user, and when I'm home I plug into a large external monitor to get additional screen space. When I'm on the go I disconnect and use my laptop's built-in display. For the most part this arrangement works very well; however, I occasionally run into an issue where I'll resize an app on the external, causing it to be too large to fit on the built-in screen when I disconnect. Most apps don't have a problem decreasing their height automatically or resizing to fit when I click the green orb, but some (like iTunes) don't want to cooperate. How can I resize apps like iTunes without reconnecting to my external? Here's a screenshot:

  Read the article

• USB Ports In Wrong Mode, How To Use usbmodeswitch?

  - by user86872

  I haven't had access to my USB ports as media devices for a couple days now. I've been reading and researching everything I can find but I can't find a good guide for usbmodeswtich or usbms that I can decipher. The USB's are fine for power, but won't support my android phone as a media device, which is killing me because I use adb everyday, and won't support my plug and play mouse any longer. Not sure what caused the switch, though I think it may be related to the suspend issue I've read about, but the solutions in those threads I read also didn't work. Below is my system information and details. System: Ubuntu 12.04, 64-bit, Dedicated Machine Machine: HP-Pavillion g6 notebook, AMD A6 Quad Core Processor USBs used for: Cooling dock, Android Debug Bridge, Wireless Mouse Attempted Mod Probe, udev restart, unable to attempt lsusb due to my own lack of knowledge. :) Last Attempt Readout: ncandiano@ncandiano-HP-Pavilion-g6-Notebook-PC:~$ sudo modprobe -r usbhid && sleep 5 && sudo modprobe usbhid ncandiano@ncandiano-HP-Pavilion-g6-Notebook-PC:~$ sudo modprobe -r usb-storage ncandiano@ncandiano-HP-Pavilion-g6-Notebook-PC:~$ sudo modprobe usb-storage ncandiano@ncandiano-HP-Pavilion-g6-Notebook-PC:~$ sudo restart udev udev start/running, process 2624 ncandiano@ncandiano-HP-Pavilion-g6-Notebook-PC:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 0461:4de7 Primax Electronics, Ltd webcam Any help would be greatly appreciated!

  Read the article

• Perl script rendered in browser as code through symlink - fine when accessed directly

  - by John Dittmar

  I have a Rails 4 app that has some views that post to Perl cgi scripts. The perl scripts are accessed via a symbolic link to a folder called "cgi-bin". When I navigate to a perl script through the symbolic link they are rendered as text instead of executed (ie: localhost:3000/cgi-bin/test.cgi), however when I access them directly they execute without issue (ie. localhost/path/to/cgi-bin/test.cgi). I am using apache2 on os x. In the directory localhost/path/to/ I have an .htaccess file that contains the following: # General Apache options AddHandler fastcgi-script .fcgi AddHandler cgi-script .cgi Options +FollowSymLinks +ExecCGI I have the exact same lines in the .htaccess file that I have in localhost:3000/ I have also uncommented the AllowOverride all in httpd.conf. The are no errors in apache's error log. When I access the direct link to test.cgi a new line is appended to apache's access log, when I access the script through the symbolic link (and it is rendered as text), there is no line appended to the access log. Any idea why this error occurs? This setup worked fine in a previous version of rails of OS X, but recently I upgraded to Mavericks and figured I should update the Rails application to v4.0 as well.

  Read the article

• Terminal/Putty showing control characters (^M) after updating

  - by jaycee48

  I updated my system yesterday afternoon using the recommended updates from Update Manager. After it completed, I shutdown my system and went home for the day. I come in this morning and I am getting control characters displayed when using vi in both the standard terminal emulator, putty, and putty inside of my Windows virtual that I run with VirtualBox. I have made no other system changes and I cannot figure out how this occurred. It's as if every text file I have was created in DOS. I've searched the forums and I haven't found any answers. I am using xterm as my emulator and I checked with 3 of my coworkers and none of them are having this problem so we do not believe it is a server side issue. Especially since I've checked 3 different servers. There's nothing in my .profile other than PATH variables so I'm using the same terminal settings as everyone else. Some files are fine (I can open and read both /etc/environment and my .profile) but most of any kind of server generated log file is trash. Running cat or head on the same file displays the contents without the characters. Any ideas would be appreciated. Thanks.

  Read the article

• Tumblr custom domain not redirecting properly

  - by Manic

  I decided to host my blog at Tumblr, using their custom domain setup (http://blog.smokingfishgames.com/ instead of http://smokingfishgames.tumblr.com). However, it's been 72 hours and I'm still getting spotty redirection. It works some of the time--I go and see the page and blog, and it's all fine. However, it occasionally just stops working and redirects back to my web host, which is a directory with nothing but a single file called BUGGER.html (which I stuck in to make sure that it was my web host and not some Tumblr empty directory). Clearing the Chrome DNS cache makes the problem go away--for a while. After a few minutes, or an hour, or however long, I'll start seeing BUGGER.html again. I clear the cache, and poof, the blog shows up. The thing that's curious to me is that when I clear the cache and get BUGGER.html again (which happens occasionally), I can look at my Chrome DNS cache and see assets.tumblr.com UNSPECIFIED blog.smokingfishgames.com UNSPECIFIED www.tumblr.com UNSPECIFIED IP addresses and expiration times omitted for brevity's sake--if they're important I'm sure I can replicate the issue. This implies, to me anyway, that my browser is reaching Tumblr but getting bounced back to my web host. Any reason why this would be happening, or is this a normal symptom of DNS propagation? If it is a problem, should I be bothering Tumblr or my host with it, or is this something I can fix myself?

  Read the article

• MQTT, GWT, ActiveMQ stack to bring jms to the browser

  - by scphantm

  I am in the preliminary stages of architecting a legacy replacement project. They already have sub half second performance on their green screens and they want the same on their web app. We have a 390 mainframe that can handle anything we throw at it but they don't have a good jvm for it, so we have two tiers of websphere servers between the mainframe and the browser, The ui server, and the bl server. For the ui, I'm leaning towards GWT. But one thing that I think would seal the deal is to add messaging capabilities to the browser. The idea is say you click on a link that displays a second panel of information, instead of the classic GWT where it triggers a GWT-RPC call to the ui server, the ui server routs it to the bl server, the bl sends it to the mainframe and back out, it drops an MQTT message directly to the bl server or directly to the mainframe. Say writes go to the bl, reads go to the mainframe. This is an easy enough thing in classic jms because you can issue a message that has an expected response. Then have your callback ready to get the resonse. But from what I'm reading so far. It looks like mqtt doesn't have that. It looks like it's strictly fire and forget, which would make it really tough to come up with a way to get a response back to the workstation that called it. Am I right here? Has anyone tried this stack before with gwt.

  Read the article

• How do I clone an Ubuntu server under VMWare

  - by dave

  I have a Ubuntu 12.04 server running under VMWare. As best as I can tell, the VMWare vmbk file has been corrupted. The server is operating normally, but this is preventing backups (using Veeam). To remedy this, I'd like to create a duplicate VM without the corruption issue. However, with the corrupted file VMWare can't help me, eg. create a simple clone. I can create a new VM. How do I clone the configuration / data from my problematic server into the new one? Updated: just to clarify: I realise I can't use the VMWare clone tools. I will manually create a new VM (with a base O/S if necessary). How to I replicate the O/S and data from one VM into another?

  Read the article

• Why would video stutter on HDMI but not on DVI?

  - by CorvT

  I've got a system running Ubuntu 12.04 with an i3 2120T CPU/GPU. When I play video through mplayer, I notice when I'm hooked up to a screen via HDMI there is a small stutter (1-2 frames) every few seconds. I don't see this happening when I connect via DVI on the same screen. Resolution and refresh rate are same for both HDMI and DVI, so I'm not sure where else the problem could be coming from. I've also tried two different screens, and different cables. I see the stutter with either HDMI-HDMI cables, or DVI-HDMI cable with DVI from the PC and HDMI into the screen. I don't see the stutter with DVI-DVI cables, or when I use HDMI-DVI cables with HDMI from the PC to DVI into the screen. I've also tried using an AMD 5XXX series card with the open source radeon driver, and saw the same problem. I then tried an nVidia GeForce 210 card with the closed source driver, and the stutter went away. To me this smells like a driver/mesa/glx issue (since the problem went away with the nvidia card/driver), but I have no idea how to track this down.

  Read the article

• Dell XPS 710 - Boot Device Not Available

  - by WilliamKF

  Recently I was gifted a Dell XPS 710 tower running WinXP SP3. It was running fine until today when I restarted and received a blue screen and the error "unmountable boot volume". In order to fix this issue I've attempted to boot from the Windows XP CD and run chkdsk. However when I attempt to boot from the CD drive I get a "Boot Device not Available" error. Next I made a bootable USB flash drive, but receive the same error as the CD drive. The BIOS recognizes the CD and flash drives, and they appear in the boot device list, but neither will boot. I've attempted to resolve this by re-arranging the boot order in the BIOS and switching IDE channels/setting jumpers on the drives themselves, to no effect. I cannot move the hard drive to another machine because the XPS is the only one that supports SATA drives.

  Read the article

< Previous Page | 551 552 553 554 555 556 557 558 559 560 561 562  | Next Page >