Search Results

Search found 15439 results on 618 pages for 'wls configuration'.

Page 555/618 | < Previous Page | 551 552 553 554 555 556 557 558 559 560 561 562  | Next Page >

• Double Layer DVD+R burning problem - I/O Error

  - by Mehper C. Palavuzlar

  I have a modern PC (Quad Core CPU, 4 GB RAM, Win7 Home Premium 64-bit) but I have a problem with burning .dvd images to Double Layer (8.5 GB) DVDs. I wasted too many DVD+R DL discs but to no avail. Here is a short explanation of what I did: I'm using ImgBurn v2.5.0.0 (latest version). I'm trying to burn an image file (.dvd) which is together with the related .iso file in the same folder. In ImgBurn, I select the file with .dvd extension, and set writing speed to 2.4x. Burning process starts normally, but around 7% of the process, it gives a I/O Write Error, which is as follows: I wasted 3 discs (Magic, Made in Taiwan, DVD+R DL, 8.5 GB) trying the same thing. My DVD writer is LG GH22NP20 with IDE connection type. I updated its firmware from 1.04 to 2.00 but no success in burning again. Then my cousin brought his LG (an older model) which, he claims, was successful in writing DL discs with the same brand (Magic). I plugged off my LG and plugged the older one in, and tried to burn the image again. It also gave an I/O Error even without standing till 7%. I tried another burning program (CloneCD), but failed again. Then I bought other brands (TDK and VERBATIM) and tried to burn the image. Burning process started successfully, but around 14% (for Verbatim) and 25% (for TDK) failed again. Here is a screeny from ImgBurn: I've burned lots of 4.7 GB DVD+Rs and DVD-Rs successfully, even without a single error, with this LG DVD writer, but this case is very bothering for me. What should I do? Should I buy a new DVD writer other than LG? Could this be related to Windows or my hardware configuration? Thanks for your help. Edit: My burner works on my cousin's machine. So the problem must be related to my system. What could be the reason? Latest news: I borrowed an external USB DVD writer from a friend, which is PHILIPS SPD3000CC (an old model). Guess what! It's burning DVD+R DLs successfully! How come an internal DVD writer of a brand new computer system cannot burn DL DVDs? Now I'm considering buying a new internal DVD writer with not IDE, but SATA connection...

  Read the article

• Apache2 benchmarks - very poor performance

  - by andrzejp

  I have two servers on which I test the configuration of apache2. The first server: 4GB of RAM, AMD Athlon (tm) 64 X2 Dual Core Processor 5600 + Apache 2.2.3, mod_php, mpm prefork: Settings: Timeout 100 KeepAlive On MaxKeepAliveRequests 150 KeepAliveTimeout 4 <IfModule Mpm_prefork_module> StartServers 7 MinSpareServers 15 MaxSpareServers 30 MaxClients 250 MaxRequestsPerChild 2000 </ IfModule> Compiled in modules: core.c mod_log_config.c mod_logio.c prefork.c http_core.c mod_so.c Second server: 8GB of RAM, Intel (R) Core (TM) i7 CPU [email protected] Apache 2.2.9, **fcgid, mpm worker, suexec** PHP scripts are running via fcgi-wrapper Settings: Timeout 100 KeepAlive On MaxKeepAliveRequests 100 KeepAliveTimeout 4 <IfModule Mpm_worker_module> StartServers 10 MaxClients 200 MinSpareThreads 25 MaxSpareThreads 75 ThreadsPerChild 25 MaxRequestsPerChild 1000 </ IfModule> Compiled in modules: core.c mod_log_config.c mod_logio.c worker.c http_core.c mod_so.c The following test results, which are very strange! New server (dynamic content - php via fcgid+suexec): Server Software: Apache/2.2.9 Server Hostname: XXXXXXXX Server Port: 80 Document Path: XXXXXXX Document Length: 179512 bytes Concurrency Level: 10 Time taken for tests: 0.26276 seconds Complete requests: 1000 Failed requests: 0 Total transferred: 179935000 bytes HTML transferred: 179512000 bytes Requests per second: 38.06 Transfer rate: 6847.88 kb/s received Connnection Times (ms) min avg max Connect: 2 4 54 Processing: 161 257 449 Total: 163 261 503 Old server (dynamic content - mod_php): Server Software: Apache/2.2.3 Server Hostname: XXXXXX Server Port: 80 Document Path: XXXXXX Document Length: 187537 bytes Concurrency Level: 10 Time taken for tests: 173.073 seconds Complete requests: 1000 Failed requests: 22 (Connect: 0, Length: 22, Exceptions: 0) Total transferred: 188003372 bytes HTML transferred: 187546372 bytes Requests per second: 5777.91 Transfer rate: 1086267.40 kb/s received Connnection Times (ms) min avg max Connect: 3 3 28 Processing: 298 1724 26615 Total: 301 1727 26643 Old server: Static content (jpg file) Server Software: Apache/2.2.3 Server Hostname: xxxxxxxxx Server Port: 80 Document Path: /images/top2.gif Document Length: 40486 bytes Concurrency Level: 100 Time taken for tests: 3.558 seconds Complete requests: 1000 Failed requests: 0 Write errors: 0 Total transferred: 40864400 bytes HTML transferred: 40557482 bytes Requests per second: 281.09 [#/sec] (mean) Time per request: 355.753 [ms] (mean) Time per request: 3.558 [ms] (mean, across all concurrent requests) Transfer rate: 11217.51 [Kbytes/sec] received Connection Times (ms) min mean[+/-sd] median max Connect: 3 11 4.5 12 23 Processing: 40 329 61.4 339 1009 Waiting: 6 282 55.2 293 737 Total: 43 340 63.0 351 1020 New server - static content (jpg file) Server Software: Apache/2.2.9 Server Hostname: XXXXX Server Port: 80 Document Path: /images/top2.gif Document Length: 40486 bytes Concurrency Level: 100 Time taken for tests: 3.571531 seconds Complete requests: 1000 Failed requests: 0 Write errors: 0 Total transferred: 41282792 bytes HTML transferred: 41030080 bytes Requests per second: 279.99 [#/sec] (mean) Time per request: 357.153 [ms] (mean) Time per request: 3.572 [ms] (mean, across all concurrent requests) Transfer rate: 11287.88 [Kbytes/sec] received Connection Times (ms) min mean[+/-sd] median max Connect: 2 63 24.8 66 119 Processing: 124 278 31.8 282 391 Waiting: 3 70 28.5 66 164 Total: 126 341 35.9 350 443 I noticed that in the apache error.log is a lot of entries: [notice] mod_fcgid: call /www/XXXXX/public_html/forum/index.php with wrapper /www/php-fcgi-scripts/XXXXXX/php-fcgi-starter What I have omitted, or do not understand? Such a difference in requests per second? Is it possible? What could be the cause?

  Read the article

• JBoss AS 5: starts but can't connect (Windows, remote)

  - by Nuwan

  Hello I installed Jboss 5.0GA and Its works fine in localhost.But I want It to access through remote Machine.Then I bind my IP address to my server and started it.This is the command I used run.bat -b 10.17.62.63 Then the server Starts fine This is the console log when starting the server > =============================================================================== > > JBoss Bootstrap Environment > > JBOSS_HOME: C:\jboss-5.0.0.GA > > JAVA: C:\Program Files\Java\jdk1.6.0_34\bin\java > > JAVA_OPTS: -Dprogram.name=run.bat -server -Xms128m -Xmx512m > -XX:MaxPermSize=25 6m -Dorg.jboss.resolver.warning=true -Dsun.rmi.dgc.client.gcInterval=3600000 -Ds un.rmi.dgc.server.gcInterval=3600000 > > CLASSPATH: C:\jboss-5.0.0.GA\bin\run.jar > > =============================================================================== > > run.bat: unused non-option argument: ûb run.bat: unused non-option > argument: 0.0.0.0 13:43:38,179 INFO [ServerImpl] Starting JBoss > (Microcontainer)... 13:43:38,179 INFO [ServerImpl] Release ID: JBoss > [Morpheus] 5.0.0.GA (build: SV NTag=JBoss_5_0_0_GA date=200812041714) > 13:43:38,179 INFO [ServerImpl] Bootstrap URL: null 13:43:38,179 INFO > [ServerImpl] Home Dir: C:\jboss-5.0.0.GA 13:43:38,179 INFO > [ServerImpl] Home URL: file:/C:/jboss-5.0.0.GA/ 13:43:38,195 INFO > [ServerImpl] Library URL: file:/C:/jboss-5.0.0.GA/lib/ 13:43:38,195 > INFO [ServerImpl] Patch URL: null 13:43:38,195 INFO [ServerImpl] > Common Base URL: file:/C:/jboss-5.0.0.GA/common/ > > 13:43:38,195 INFO [ServerImpl] Common Library URL: > file:/C:/jboss-5.0.0.GA/comm on/lib/ 13:43:38,195 INFO [ServerImpl] > Server Name: default 13:43:38,195 INFO [ServerImpl] Server Base Dir: > C:\jboss-5.0.0.GA\server 13:43:38,195 INFO [ServerImpl] Server Base > URL: file:/C:/jboss-5.0.0.GA/server/ > > 13:43:38,210 INFO [ServerImpl] Server Config URL: > file:/C:/jboss-5.0.0.GA/serve r/default/conf/ 13:43:38,210 INFO > [ServerImpl] Server Home Dir: C:\jboss-5.0.0.GA\server\defaul t > 13:43:38,210 INFO [ServerImpl] Server Home URL: > file:/C:/jboss-5.0.0.GA/server/ default/ 13:43:38,210 INFO > [ServerImpl] Server Data Dir: C:\jboss-5.0.0.GA\server\defaul t\data > 13:43:38,210 INFO [ServerImpl] Server Library URL: > file:/C:/jboss-5.0.0.GA/serv er/default/lib/ 13:43:38,210 INFO > [ServerImpl] Server Log Dir: C:\jboss-5.0.0.GA\server\default \log > 13:43:38,210 INFO [ServerImpl] Server Native Dir: > C:\jboss-5.0.0.GA\server\defa ult\tmp\native 13:43:38,210 INFO > [ServerImpl] Server Temp Dir: C:\jboss-5.0.0.GA\server\defaul t\tmp > 13:43:38,210 INFO [ServerImpl] Server Temp Deploy Dir: > C:\jboss-5.0.0.GA\server \default\tmp\deploy 13:43:39,710 INFO > [ServerImpl] Starting Microcontainer, bootstrapURL=file:/C:/j > boss-5.0.0.GA/server/default/conf/bootstrap.xml 13:43:40,851 INFO > [VFSCacheFactory] Initializing VFSCache [org.jboss.virtual.pl > ugins.cache.IterableTimedVFSCache] 13:43:40,866 INFO > [VFSCacheFactory] Using VFSCache [IterableTimedVFSCache{lifet > ime=1800, resolution=60}] 13:43:41,616 INFO [CopyMechanism] VFS temp > dir: C:\jboss-5.0.0.GA\server\defaul t\tmp 13:43:41,648 INFO > [ZipEntryContext] VFS force nested jars copy-mode is enabled. > > 13:43:44,288 INFO [ServerInfo] Java version: 1.6.0_34,Sun > Microsystems Inc. 13:43:44,288 INFO [ServerInfo] Java VM: Java > HotSpot(TM) Server VM 20.9-b04,Sun Microsystems Inc. 13:43:44,288 > INFO [ServerInfo] OS-System: Windows XP 5.1,x86 13:43:44,569 INFO > [JMXKernel] Legacy JMX core initialized 13:43:50,148 INFO > [ProfileServiceImpl] Loading profile: default from: org.jboss > .system.server.profileservice.repository.SerializableDeploymentRepository@e72f0c > (root=C:\jboss-5.0.0.GA\server, > key=org.jboss.profileservice.spi.ProfileKey@143b > 82c3[domain=default,server=default,name=default]) 13:43:50,148 INFO > [ProfileImpl] Using repository:org.jboss.system.server.profil > eservice.repository.SerializableDeploymentRepository@e72f0c(root=C:\jboss-5.0.0. > GA\server, > key=org.jboss.profileservice.spi.ProfileKey@143b82c3[domain=default,s > erver=default,name=default]) 13:43:50,148 INFO [ProfileServiceImpl] > Loaded profile: ProfileImpl@8b3bb3{key=o > rg.jboss.profileservice.spi.ProfileKey@143b82c3[domain=default,server=default,na > me=default]} 13:43:54,804 INFO [WebService] Using RMI server > codebase: http://127.0.0.1:8083 / 13:44:12,147 INFO [CXFServerConfig] > JBoss Web Services - Stack CXF Runtime Serv er 13:44:12,147 INFO > [CXFServerConfig] 3.1.2.GA 13:44:29,788 INFO > [Ejb3DependenciesDeployer] Encountered deployment AbstractVFS > DeploymentContext@29776073{vfszip:/C:/jboss-5.0.0.GA/server/default/deploy/myE-e > jb.jar} 13:44:29,819 INFO [Ejb3DependenciesDeployer] Encountered > deployment AbstractVFS > DeploymentContext@29776073{vfszip:/C:/jboss-5.0.0.GA/server/default/deploy/myE-e > jb.jar} 13:44:29,819 INFO [Ejb3DependenciesDeployer] Encountered > deployment AbstractVFS > DeploymentContext@29776073{vfszip:/C:/jboss-5.0.0.GA/server/default/deploy/myE-e > jb.jar} 13:44:29,819 INFO [Ejb3DependenciesDeployer] Encountered > deployment AbstractVFS > DeploymentContext@29776073{vfszip:/C:/jboss-5.0.0.GA/server/default/deploy/myE-e > jb.jar} 13:44:37,116 INFO [JMXConnectorServerService] JMX Connector > server: service:jmx > :rmi://127.0.0.1/jndi/rmi://127.0.0.1:1090/jmxconnector 13:44:38,022 > INFO [MailService] Mail Service bound to java:/Mail 13:44:43,162 WARN > [JBossASSecurityMetadataStore] WARNING! POTENTIAL SECURITY RI SK. It > has been detected that the MessageSucker component which sucks > messages f rom one node to another has not had its password changed > from the installation d efault. Please see the JBoss Messaging user > guide for instructions on how to do this. 13:44:43,209 WARN > [AnnotationCreator] No ClassLoader provided, using TCCL: org. > jboss.managed.api.annotation.ManagementComponent 13:44:43,600 INFO > [TransactionManagerService] JBossTS Transaction Service (JTA version) > - JBoss Inc. 13:44:43,600 INFO [TransactionManagerService] Setting up property manager MBean and JMX layer 13:44:44,366 INFO > [TransactionManagerService] Initializing recovery manager 13:44:44,678 > INFO [TransactionManagerService] Recovery manager configured > 13:44:44,678 INFO [TransactionManagerService] Binding > TransactionManager JNDI R eference 13:44:44,787 INFO > [TransactionManagerService] Starting transaction recovery man ager > 13:44:46,428 INFO [Http11Protocol] Initializing Coyote HTTP/1.1 on > http-127.0.0 .1-8080 13:44:46,459 INFO [AjpProtocol] Initializing > Coyote AJP/1.3 on ajp-127.0.0.1-80 09 13:44:46,459 INFO > [StandardService] Starting service jboss.web 13:44:46,475 INFO > [StandardEngine] Starting Servlet Engine: JBoss Web/2.1.1.GA > 13:44:46,616 INFO [Catalina] Server startup in 350 ms 13:44:46,709 > INFO [TomcatDeployment] deploy, ctxPath=/web-console, vfsUrl=manag > ement/console-mgr.sar/web-console.war 13:44:48,553 INFO > [TomcatDeployment] deploy, ctxPath=/juddi, vfsUrl=juddi-servi > ce.sar/juddi.war 13:44:48,678 INFO [RegistryServlet] Loading jUDDI > configuration. 13:44:48,694 INFO [RegistryServlet] Resources loaded > from: /WEB-INF/juddi.prope rties 13:44:48,709 INFO [RegistryServlet] > Initializing jUDDI components. 13:44:48,991 INFO [TomcatDeployment] > deploy, ctxPath=/invoker, vfsUrl=http-invo ker.sar/invoker.war > 13:44:49,162 INFO [TomcatDeployment] deploy, ctxPath=/jbossws, > vfsUrl=jbossws.s ar/jbossws-management.war 13:44:49,475 INFO > [RARDeployment] Required license terms exist, view vfszip:/C: > /jboss-5.0.0.GA/server/default/deploy/jboss-local-jdbc.rar/META-INF/ra.xml > 13:44:49,569 INFO [RARDeployment] Required license terms exist, view > vfszip:/C: > /jboss-5.0.0.GA/server/default/deploy/jboss-xa-jdbc.rar/META-INF/ra.xml > 13:44:49,741 INFO [RARDeployment] Required license terms exist, view > vfszip:/C: > /jboss-5.0.0.GA/server/default/deploy/jms-ra.rar/META-INF/ra.xml > 13:44:49,819 INFO [RARDeployment] Required license terms exist, view > vfszip:/C: > /jboss-5.0.0.GA/server/default/deploy/mail-ra.rar/META-INF/ra.xml > 13:44:49,912 INFO [RARDeployment] Required license terms exist, view > vfszip:/C: > /jboss-5.0.0.GA/server/default/deploy/quartz-ra.rar/META-INF/ra.xml > 13:44:50,069 INFO [SimpleThreadPool] Job execution threads will use > class loade r of thread: main 13:44:50,115 INFO [QuartzScheduler] > Quartz Scheduler v.1.5.2 created. 13:44:50,131 INFO [RAMJobStore] > RAMJobStore initialized. 13:44:50,131 INFO [StdSchedulerFactory] > Quartz scheduler 'DefaultQuartzSchedule r' initialized from default > resource file in Quartz package: 'quartz.properties' > > 13:44:50,131 INFO [StdSchedulerFactory] Quartz scheduler version: > 1.5.2 13:44:50,131 INFO [QuartzScheduler] Scheduler DefaultQuartzScheduler_$_NON_CLUS TERED started. 13:44:51,194 INFO > [ConnectionFactoryBindingService] Bound ConnectionManager 'jb > oss.jca:service=DataSourceBinding,name=DefaultDS' to JNDI name > 'java:DefaultDS' 13:44:51,819 WARN [QuartzTimerServiceFactory] sql > failed: CREATE TABLE QRTZ_JOB > _DETAILS(JOB_NAME VARCHAR(80) NOT NULL, JOB_GROUP VARCHAR(80) NOT NULL, DESCRIPT ION VARCHAR(120) NULL, JOB_CLASS_NAME VARCHAR(128) NOT > NULL, IS_DURABLE VARCHAR( 1) NOT NULL, IS_VOLATILE VARCHAR(1) NOT > NULL, IS_STATEFUL VARCHAR(1) NOT NULL, R EQUESTS_RECOVERY VARCHAR(1) > NOT NULL, JOB_DATA BINARY NULL, PRIMARY KEY (JOB_NAM E,JOB_GROUP)) > 13:44:51,912 INFO [SimpleThreadPool] Job execution threads will use > class loade r of thread: main 13:44:51,928 INFO [QuartzScheduler] > Quartz Scheduler v.1.5.2 created. 13:44:51,928 INFO [JobStoreCMT] > Using db table-based data access locking (synch ronization). > 13:44:51,944 INFO [JobStoreCMT] Removed 0 Volatile Trigger(s). > 13:44:51,944 INFO [JobStoreCMT] Removed 0 Volatile Job(s). > 13:44:51,944 INFO [JobStoreCMT] JobStoreCMT initialized. 13:44:51,944 > INFO [StdSchedulerFactory] Quartz scheduler 'JBossEJB3QuartzSchedu > ler' initialized from an externally provided properties instance. > 13:44:51,959 INFO [StdSchedulerFactory] Quartz scheduler version: > 1.5.2 13:44:51,959 INFO [JobStoreCMT] Freed 0 triggers from 'acquired' / 'blocked' st ate. 13:44:51,975 INFO [JobStoreCMT] > Recovering 0 jobs that were in-progress at the time of the last > shut-down. 13:44:51,975 INFO [JobStoreCMT] Recovery complete. > 13:44:51,975 INFO [JobStoreCMT] Removed 0 'complete' triggers. > 13:44:51,975 INFO [JobStoreCMT] Removed 0 stale fired job entries. > 13:44:51,990 INFO [QuartzScheduler] Scheduler > JBossEJB3QuartzScheduler_$_NON_CL USTERED started. 13:44:52,381 INFO > [ServerPeer] JBoss Messaging 1.4.1.GA server [0] started 13:44:52,569 > INFO [QueueService] Queue[/queue/DLQ] started, fullSize=200000, pa > geSize=2000, downCacheSize=2000 13:44:52,584 INFO [QueueService] > Queue[/queue/ExpiryQueue] started, fullSize=20 0000, pageSize=2000, > downCacheSize=2000 13:44:52,709 INFO [ConnectionFactory] Connector > bisocket://127.0.0.1:4457 has l easing enabled, lease period 10000 > milliseconds 13:44:52,709 INFO [ConnectionFactory] > org.jboss.jms.server.connectionfactory.Co nnectionFactory@1a8ac5e > started 13:44:52,725 WARN [ConnectionFactoryJNDIMapper] > supportsFailover attribute is t rue on connection factory: > jboss.messaging.connectionfactory:service=ClusteredCo nnectionFactory > but post office is non clustered. So connection factory will *no t* > support failover 13:44:52,725 WARN [ConnectionFactoryJNDIMapper] > supportsLoadBalancing attribute is true on connection factory: > jboss.messaging.connectionfactory:service=Cluste redConnectionFactory > but post office is non clustered. So connection factory wil l *not* > support load balancing 13:44:52,740 INFO [ConnectionFactory] > Connector bisocket://127.0.0.1:4457 has l easing enabled, lease period > 10000 milliseconds 13:44:52,740 INFO [ConnectionFactory] > org.jboss.jms.server.connectionfactory.Co nnectionFactory@1d43178 > started 13:44:52,740 INFO [ConnectionFactory] Connector > bisocket://127.0.0.1:4457 has l easing enabled, lease period 10000 > milliseconds 13:44:52,756 INFO [ConnectionFactory] > org.jboss.jms.server.connectionfactory.Co nnectionFactory@52728a > started 13:44:53,084 INFO [ConnectionFactoryBindingService] Bound > ConnectionManager 'jb > oss.jca:service=ConnectionFactoryBinding,name=JmsXA' to JNDI name > 'java:JmsXA' 13:44:53,225 INFO [TomcatDeployment] deploy, ctxPath=/, > vfsUrl=ROOT.war 13:44:53,553 INFO [TomcatDeployment] deploy, > ctxPath=/jmx-console, vfsUrl=jmx-c onsole.war 13:44:53,975 INFO > [TomcatDeployment] deploy, ctxPath=/TestService, vfsUrl=TestS > erviceEAR.ear/TestService.war 13:44:55,662 INFO [JBossASKernel] > Created KernelDeployment for: myE-ejb.jar 13:44:55,709 INFO > [JBossASKernel] installing bean: jboss.j2ee:jar=myE-ejb.jar,n > ame=RPSService,service=EJB3 13:44:55,725 INFO [JBossASKernel] with > dependencies: 13:44:55,725 INFO [JBossASKernel] and demands: > 13:44:55,725 INFO [JBossASKernel] > jboss.ejb:service=EJBTimerService 13:44:55,725 INFO [JBossASKernel] > and supplies: 13:44:55,725 INFO [JBossASKernel] > jndi:RPSService/remote 13:44:55,725 INFO [JBossASKernel] Added > bean(jboss.j2ee:jar=myE-ejb.jar,name=RP SService,service=EJB3) to > KernelDeployment of: myE-ejb.jar 13:44:56,772 INFO > [SessionSpecContainer] Starting jboss.j2ee:jar=myE-ejb.jar,na > me=RPSService,service=EJB3 13:44:56,803 INFO [EJBContainer] STARTED > EJB: com.monz.rpz.RPSService ejbName: RPSService 13:44:56,819 INFO > [JndiSessionRegistrarBase] Binding the following Entries in G lobal > JNDI: > > > 13:44:57,381 INFO [DefaultEndpointRegistry] register: > jboss.ws:context=myE-ejb, endpoint=RPSService 13:44:57,428 INFO > [DescriptorDeploymentAspect] Add Service id=RPSService > address=http://127.0.0.1:8080/myE-ejb/RPSService > implementor=com.monz.rpz.RPSService > invoker=org.jboss.wsf.stack.cxf.InvokerEJB3 mtomEnabled=false > 13:44:57,459 INFO [DescriptorDeploymentAspect] JBossWS-CXF > configuration genera ted: > file:/C:/jboss-5.0.0.GA/server/default/tmp/jbossws/jbossws-cxf1864137209199 > 110130.xml 13:44:57,569 INFO [TomcatDeployment] deploy, ctxPath=/myE-ejb, vfsUrl=myE-ejb.j ar 13:44:57,709 WARN [config] > Unable to process deployment descriptor for context '/myE-ejb' > 13:44:59,334 INFO [Http11Protocol] Starting Coyote HTTP/1.1 on > http-127.0.0.1-8 080 13:44:59,397 INFO [AjpProtocol] Starting Coyote > AJP/1.3 on ajp-127.0.0.1-8009 13:44:59,459 INFO [ServerImpl] JBoss > (Microcontainer) [5.0.0.GA (build: SVNTag= JBoss_5_0_0_GA > date=200812041714)] Started in 1m:21s:233ms But Still I cant connect to It when I Type my IP address in my browser thanks

  Read the article

• Accidentally Removed Permissions for the XP SP3 Registry key HKEY_CLASSES_ROOT! Workaround Please!

  - by Praveen Kumar

  This is Praveen and I am using Microsoft Windows XP SP3 Build 2600. I had problems with using Microsoft Office 2010. It was keeping on saying, "Please wait while windows configures Microsoft Office Professional Plus 2010". After seeing this link: http://social.answers.microsoft.com/Forums/en-US/outlookcontact/thread/6e9c3f2e-010a-4b74-b433-0c41548ee468?prof=required I thought of giving the Registry Key: HKEY_CLASSES_ROOT, full access permissions for Everyone. I went to the registry, right-clicked on HKEY_CLASSES_ROOT and clicked on Permissions. I added Everyone and gave Full Control to the ACL and clicked on Apply. Also I checked "Replace permission entries on all child objects with entries shown here that apply to child objects." After a long time, it said with an error, cannot replace for few entries. Now, the key, HKEY_CLASSES_ROOT has no access to any user. My system is not starting up. Some of my friends asked me to try the Last Known Good Configuration. Even that did not work out. When I tried to open in the Safe Mode, I got only one driver to load and even that didn't load well. Another friend suggested me to put the Setup disk and reinstall the OS. I tried that and after completing the "Installing Device Drivers" part, when it started "Installing Network", the system is getting restarted. Now, the setup is also half way through and even if I open in Safe Mode to try System Restore, it popped up a message saying, "Setup cannot run under Safe Mode. Setup will restart now." and the system is restarting. All my official files and my software, which I developed for Registry Security, resides in my system now. I am unable to access the system and I want it to be working to submit the project, as the deadline is this week. I had no better solutions from elsewhere. Can anyone please help me out with this issue. If it is possible to open the registry editor's stored file from another system and restore the access permissions, I hope it would solve the problem. Please do help me. Thanking You, Praveen.

  Read the article

• CYGWin and sshd. Accepts authentication, but won't connect

  - by timramich

  Everything I find relating to this is the "ssh-exchange-identification:" error. This doesn't happen for me. I get two lines: Connection to localhost closed by remote host. Connection to localhost closed. ssh -v localhost spits out: OpenSSH_5.8p1, OpenSSL 0.9.8r 8 Feb 2011 debug1: Reading configuration data /etc/ssh_config debug1: Connecting to localhost [::1] port 22. debug1: Connection established. debug1: identity file /home/tim/.ssh/id_rsa type -1 debug1: identity file /home/tim/.ssh/id_rsa-cert type -1 debug1: identity file /home/tim/.ssh/id_dsa type -1 debug1: identity file /home/tim/.ssh/id_dsa-cert type -1 debug1: identity file /home/tim/.ssh/id_ecdsa type -1 debug1: identity file /home/tim/.ssh/id_ecdsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.8 debug1: match: OpenSSH_5.8 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.8 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: sending SSH2_MSG_KEX_ECDH_INIT debug1: expecting SSH2_MSG_KEX_ECDH_REPLY debug1: Server host key: ECDSA 64:e3:27:90:ef:48:93:21:38:ea:9b:0e:0b:07:b0:2a debug1: Host 'localhost' is known and matches the ECDSA host key. debug1: Found key in /home/tim/.ssh/known_hosts:1 debug1: ssh_ecdsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password,keyboard-interactive debug1: Next authentication method: publickey debug1: Trying private key: /home/tim/.ssh/id_rsa debug1: Trying private key: /home/tim/.ssh/id_dsa debug1: Trying private key: /home/tim/.ssh/id_ecdsa debug1: Next authentication method: keyboard-interactive debug1: Authentications that can continue: publickey,password,keyboard-interactive debug1: Next authentication method: password tim@localhost's password: debug1: Authentication succeeded (password). Authenticated to localhost ([::1]:22). debug1: channel 0: new [client-session] debug1: Requesting [email protected] debug1: Entering interactive session. debug1: channel 0: free: client-session, nchannels 1 Connection to localhost closed by remote host. Connection to localhost closed. Transferred: sent 2008, received 1376 bytes, in 0.0 seconds Bytes per second: sent 64774.0, received 44387.0 debug1: Exit status -1 I'm really at wit's end here because I couldn't get Windows' remote shell to even work. I'm so sick of using VNC just to get to a shell. Plus Windows' shell sucks because there is nothing like screen. Thanks

  Read the article

• Allow anonymous upload for Vsftpd?

  - by user15318

  I need a basic FTP server on Linux (CentOS 5.5) without any security measure, since the server and the clients are located on a test LAN, not connected to the rest of the network, which itself uses non-routable IP's behind a NAT firewall with no incoming access to FTP. Some people recommend Vsftpd over PureFTPd or ProFTPd. No matter what I try, I can't get it to allow an anonymous user (ie. logging as "ftp" or "anonymous" and typing any string as password) to upload a file: # yum install vsftpd # mkdir /var/ftp/pub/upload # cat vsftpd.conf listen=YES anonymous_enable=YES local_enable=YES write_enable=YES xferlog_file=YES #anonymous users are restricted (chrooted) to anon_root #directory was created by root, hence owned by root.root anon_root=/var/ftp/pub/incoming anon_upload_enable=YES anon_mkdir_write_enable=YES #chroot_local_user=NO #chroot_list_enable=YES #chroot_list_file=/etc/vsftpd.chroot_list chown_uploads=YES When I log on from a client, here's what I get: 500 OOPS: cannot change directory:/var/ftp/pub/incoming I also tried "# chmod 777 /var/ftp/incoming/", but get the same error. Does someone know how to configure Vsftpd with minimum security? Thank you. Edit: SELinux is disabled and here are the file permissions: # cat /etc/sysconfig/selinux SELINUX=disabled SELINUXTYPE=targeted SETLOCALDEFS=0 # sestatus SELinux status: disabled # getenforce Disabled # grep ftp /etc/passwd ftp:x:14:50:FTP User:/var/ftp:/sbin/nologin # ll /var/ drwxr-xr-x 4 root root 4096 Mar 14 10:53 ftp # ll /var/ftp/ drwxrwxrwx 2 ftp ftp 4096 Mar 14 10:53 incoming drwxr-xr-x 3 ftp ftp 4096 Mar 14 11:29 pub Edit: latest vsftpd.conf: listen=YES local_enable=YES write_enable=YES xferlog_file=YES #anonymous users are restricted (chrooted) to anon_root anonymous_enable=YES anon_root=/var/ftp/pub/incoming anon_upload_enable=YES anon_mkdir_write_enable=YES #500 OOPS: bad bool value in config file for: chown_uploads chown_uploads=YES chown_username=ftp Edit: with trailing space removed from "chown_uploads", err 500 is solved, but anonymous still doesn't work: client> ./ftp server Connected to server. 220 (vsFTPd 2.0.5) Name (server:root): ftp 331 Please specify the password. Password: 500 OOPS: cannot change directory:/var/ftp/pub/incoming Login failed. ftp> bye With user "ftp" listed in /etc/passwd with home directory set to "/var/ftp" and access rights to /var/ftp set to "drwxr-xr-x" and /var/ftp/incoming to "drwxrwxrwx"...could it be due to PAM maybe? I don't find any FTP log file in /var/log to investigate. Edit: Here's a working configuration to let ftp/anonymous connect and upload files to /var/ftp: listen=YES anonymous_enable=YES write_enable=YES anon_upload_enable=YES anon_mkdir_write_enable=YES

  Read the article

• How to allow local LAN access while connected to Cisco VPN?

  - by Ian Boyd

  How can I maintain local LAN access while connected to Cisco VPN? When connecting using Cisco VPN, the server has to ability to instruct the client to prevent local LAN access. Assuming this server-side option cannot be turned off, how can allow local LAN access while connected with a Cisco VPN client? I used to think it was simply a matter of routes being added that capture LAN traffic with a higher metric, for example: Network Destination Netmask Gateway Interface Metric 10.0.0.0 255.255.0.0 10.0.0.3 10.0.0.3 20 <--Local LAN 10.0.0.0 255.255.0.0 192.168.199.1 192.168.199.12 1 <--VPN Link And trying to delete the 10.0.x.x -> 192.168.199.12 route don't have any effect: >route delete 10.0.0.0 >route delete 10.0.0.0 mask 255.255.0.0 >route delete 10.0.0.0 mask 255.255.0.0 192.168.199.1 >route delete 10.0.0.0 mask 255.255.0.0 192.168.199.1 if 192.168.199.12 >route delete 10.0.0.0 mask 255.255.0.0 192.168.199.1 if 0x3 And while it still might simply be a routing issue, attempts to add or delete routes fail. At what level is Cisco VPN client driver doing what in the networking stack that takes overrides a local administrator's ability to administer their machine? The Cisco VPN client cannot be employing magic. It's still software running on my computer. What mechanism is it using to interfere with my machine's network? What happens when an IP/ICMP packet arrives on the network? Where in the networking stack is the packet getting eaten? See also No internet connection with Cisco VPN Cisco VPN Client interrupts connectivity to my LDAP server Cisco VPN stops Windows 7 Browsing How can I prohibit the creation of a route in Windows XP upon connection to Cisco VPN? Rerouting local LAN and Internet traffic when in VPN VPN Client "Allow local LAN Access" Allow Local LAN Access for VPN Clients on the VPN 3000 Concentrator Configuration Example LAN access gone when I connect to VPN Windows XP Documentation: Route Edit: Things I've not yet tried: >route delete 10.0.* Update: Since Cisco has abandoned their old client, in favor of AnyConnect (HTTP SSL based VPN), this question, unsolved, can be left as a relic of history. Going forward, we can try to solve the same problem with their new client.

  Read the article

• Will this RAID5 setup work (3TB Seagate Barracudas + Adaptec RAID 6405)?

  - by Slayer537

  As the title states, will this RAID combo work, and if not what needs to be changed? Overall opinions would be most helpful. I currently run a small file server of about 5TB or so. I keep outgrowing my needs and need to build a RAID setup that will allow me to expand as needed. I am new to RAID setups, especially one of the scale I have currently planned out, but I have being doing some research for the past couple of weeks and have come up with a build. Ideally, I'd have the setup completely built, but I'd like to keep the total cost around $1k and can't afford to go above $1.5k, so unfortunately that's not an option. 2 of my current drives are WD Caviar Blacks 2TB; however, I have recently learned that due to the lack of TLER those drives are awful for any RAID setup other than 0 or 1. That being said, my third drive is a Seagate Barracuda 3TB (ST300DM001) and I have found a RAID controller that states it supports it, so I'd like to use this same type of drive, if possible. Have any of you had any experience using this drive or a similar one in a RAID5 configuration? The manufacturer states that it supports it, but knowing that it is not an enterprise drive, I am slightly concerned that it could drop out of the array. I would just go with enterprise drives, but those are about double in cost... Parts list: Storage rack: http://www.ebay.com/itm/SGI-3U-Media-Storage-Server-16-Hard-Drive-Bay-SATA-SAS-Expander-Omnistor-SE3016-/140735776937?pt=LH_DefaultDomain_0&hash=item20c48188a9 3 more HDs (for now..): http://www.amazon.com/Seagate-Barracuda-3-5-Inch-Internal-ST3000DM001/dp/B005T3GRLY/ref=dp_return_2?ie=UTF8&n=172282&s=electronics Adaptec RAID 6405: http://www.newegg.com/Product/Product.aspx?Item=N82E16816103224 here's a link to the compatibility sheet if that helps: http://download.adaptec.com/pdfs/compatibility_report/arc-sas_cr_03-27-12_series6.pdf SAS expander cable: http://www.pc-pitstop.com/sas_cables_adapters/8887-2M.asp My plan is to install the RAID card in my computer and then route the SAS cable to the rack. Setup a RAID5 on 3 drives, transfer my data over from my other drive, and then add that drive to the array. Eventually, I'd like to get a 2U unit and run the file server on that and move the RAID card over to there, but that will have to happen later on. Side note: The computer the card would be going into will be running Windows 7 Pro with 24GB of DDR3-1600 and an i7-930.

  Read the article

• Why I am getting "Problem loading the page" after enabling HTTPS for Apache on Windows 7?

  - by Anish

  I enabled HTTPS on the Apache server (2.2.15) Windows 7 Enterprise by uncommenting: Include /private/etc/apache2/extra/httpd-ssl.conf in C:\Program Files (x86)\Apache Software Foundation\Apache2.2\conf\httpd.conf and modifying C:\Program Files (x86)\Apache Software Foundation\Apache2.2\conf\httpd-ssl.conf to include: DocumentRoot "C:/Program Files (x86)/Apache Software Foundation/Apache2.2/htdocs" ServerName myserver.com:443 ServerAdmin [email protected] ... SSLCertificateFile "SSLCertificateFile "C:/Program Files (x86)/Apache Software Foundation/Apache2.2/conf/cert.pem SSLCertificateKeyFile "SSLCertificateFile "C:/Program Files (x86)/Apache Software Foundation/Apache2.2/conf/key.pem" Then I restart apache (going to start-All Progranms-Apache Server 2.2-Control-restart) and go to localhost on port 443 in Firefox , where I get: <<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN"> <html> <head> <title>Index of /</title> </head> <body> <h1>Index of /</h1> <ul><li><a href="MyPageLinks/"> Links/</a></li> ..... .... </ul> </body></html> But on Display of WebPage I see: Unable to connect Firefox can't establish a connection to the server at localhost. *The site could be temporarily unavailable or too busy. Try again in a few moments. *If you are unable to load any pages, check your computer's network onnection. *If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web. I read: Why am I getting 403 Forbidden after enabling HTTPS for Apache on Mac OS X? and added default web server configuration block to match my DocumentRoot The error Log C:\Program Files (x86)\Apache Software Foundation\Apache2.2\logs\error.log gives following error: The Apache2.2 service is running. (OS 5)Access is denied. : Init: Can't open server certificate file C:/Program Files (x86)/Apache Software Foundation/Apache2.2/conf/cert.pem I checked the permissions for cert.pem and it indicates: All the permissions (Full control, Read, Read and modify, execute, Write) are marked for Admin and I am currently logged in as Admin. I tried using oldcert.pem and oldkey.pem on the same server and it works fine. Is there anything that I missed?

  Read the article

• Error connecting to Sonicwall L2TP VPN from iPad/iPhone

  - by db2

  A client has a Sonicwall Pro 2040 running SonicOS 3.0, and they'd like to be able to use the L2TP VPN client from their iPads to connect to internal services (Citrix, etc). I've enabled the L2TP VPN server on the Sonicwall, made sure to set AES-128 for phase 2, and set up the configuration on a test iPad with the appropriate username, password, and pre-shared key. When I attempt to connect, I get some rather cryptic error messages in the log on the Sonicwall: 2 03/29/2011 12:25:09.096 IKE Responder: IPSec proposal does not match (Phase 2) [My outbound IP address redacted] (admin) [WAN IP address redacted] 10.10.130.7/32 -> [WAN IP address redacted]/32 3 03/29/2011 12:25:09.096 IKE Responder: Received Quick Mode Request (Phase 2) [My outbound IP address redacted], 61364 (admin) [WAN IP address redacted], 500 4 03/29/2011 12:25:07.048 IKE Responder: IPSec proposal does not match (Phase 2) [My outbound IP address redacted] (admin) [WAN IP address redacted] 10.10.130.7/32 -> [WAN IP address redacted]/32 5 03/29/2011 12:25:07.048 IKE Responder: Received Quick Mode Request (Phase 2) [My outbound IP address redacted], 61364 (admin) [WAN IP address redacted], 500 The console log on the iPad looks like this: Mar 29 13:31:24 Daves-iPad racoon[519] <Info>: [519] INFO: ISAKMP-SA established 10.10.130.7[500]-[WAN IP address redacted][500] spi:5d705eb6c760d709:458fcdf80ee8acde Mar 29 13:31:24 Daves-iPad racoon[519] <Notice>: IPSec Phase1 established (Initiated by me). Mar 29 13:31:24 Daves-iPad kernel[0] <Debug>: launchd[519] Builtin profile: racoon (sandbox) Mar 29 13:31:25 Daves-iPad racoon[519] <Info>: [519] INFO: initiate new phase 2 negotiation: 10.10.130.7[500]<=>[WAN IP address redacted][500] Mar 29 13:31:25 Daves-iPad racoon[519] <Notice>: IPSec Phase2 started (Initiated by me). Mar 29 13:31:25 Daves-iPad racoon[519] <Info>: [519] ERROR: fatal NO-PROPOSAL-CHOSEN notify messsage, phase1 should be deleted. Mar 29 13:31:25 Daves-iPad racoon[519] <Info>: [519] ERROR: Message: '@ No proposal is chosen'. Mar 29 13:31:46 Daves-iPad racoon[519] <Info>: [519] ERROR: fatal NO-PROPOSAL-CHOSEN notify messsage, phase1 should be deleted. Mar 29 13:31:46 Daves-iPad racoon[519] <Info>: [519] ERROR: Message: '@ No proposal is chosen'. Mar 29 13:31:55 Daves-iPad pppd[518] <Notice>: IPSec connection failed Does this offer any clues as to what's going wrong?

  Read the article

• Disk performance below expectations

  - by paulH

  this is a follow-up to a previous question that I asked (Two servers with inconsistent disk speed). I have a PowerEdge R510 server with a PERC H700 integrated RAID controller (call this Server B) that was built using eight disks with 3Gb/s bandwidth that I was comparing with an almost identical server (call this Server A) that was built using four disks with 6Gb/s bandwidth. Server A had much better I/O rates than Server B. Once I discovered the difference with the disks, I had Server A rebuilt with faster 6Gbps disks. Unfortunately this resulted in no increase in the performance of the disks. Expecting that there must be some other configuration difference between the servers, we took the 6Gbps disks out of Server A and put them in Server B. This also resulted in no increase in the performance of the disks. We now have two identical servers built, with the exception that one is built with six 6Gbps disks and the other with eight 3Gbps disks, and the I/O rates of the disks is pretty much identical. This suggests that there is some bottleneck other than the disks, but I cannot understand how Server B originally had better I/O that has subsequently been 'lost'. Comparative I/O information below, as measured by SQLIO. The same parameters were used for each test. It's not the actual numbers that are significant but rather the variations between systems. In each case D: is a 2 disk RAID 1 volume, and E: is a 4 disk RAID 10 volume (apart from the original Server A, where E: was a 2 disk RAID 0 volume). Server A (original setup with 6Gpbs disks) D: Read (MB/s) 63 MB/s D: Write (MB/s) 170 MB/s E: Read (MB/s) 68 MB/s E: Write (MB/s) 320 MB/s Server B (original setup with 3Gpbs disks) D: Read (MB/s) 52 MB/s D: Write (MB/s) 88 MB/s E: Read (MB/s) 112 MB/s E: Write (MB/s) 130 MB/s Server A (new setup with 3Gpbs disks) D: Read (MB/s) 55 MB/s D: Write (MB/s) 85 MB/s E: Read (MB/s) 67 MB/s E: Write (MB/s) 180 MB/s Server B (new setup with 6Gpbs disks) D: Read (MB/s) 61 MB/s D: Write (MB/s) 95 MB/s E: Read (MB/s) 69 MB/s E: Write (MB/s) 180 MB/s Can anybody suggest any ideas what is going on here? The drives in use are as follows: Dell Seagate F617N ST3300657SS 300GB 15K RPM SAS Dell Hitachi HUS156030VLS600 300GB 3.5 inch 15000rpm 6GB SAS Hitachi Hus153030vls300 300GB Server SAS Dell ST3146855SS Seagate 3.5 inch 146GB 15K SAS

  Read the article

• PSTN Trunk TDM400P Install on Asterisk / Trixbox

  - by Jona

  Hey All, I'm trying to get a TDM400P card with FXO module to connect to our PSTN line. The card is correctly detected by Linux: [trixbox1.localdomain asterisk]# lspci 00:09.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface And asterisk can see the channel: > trixbox1*CLI> dahdi show channel 1 > Channel: 1LI> File Descriptor: 14 > Span: 11*CLI> Extension: I> Dialing: > noI> Context: from-pstn Caller ID: I> > Calling TON: 0 Caller ID name: > Mailbox: none Destroy: 0LI> InAlarm: > 1LI> Signalling Type: FXS Kewlstart > Radio: 0*CLI> Owner: <None> Real: > <None>> Callwait: <None> Threeway: > <None> Confno: -1LI> Propagated > Conference: -1 Real in conference: 0 > DSP: no1*CLI> Busy Detection: no TDD: > no1*CLI> Relax DTMF: no > Dialing/CallwaitCAS: 0/0 Default law: > ulaw Fax Handled: no Pulse phone: no > DND: no1*CLI> Echo Cancellation: > trixbox1128 taps trixbox1(unless TDM > bridged) currently OFF Actual > Confinfo: Num/0, Mode/0x0000 Actual > Confmute: No > Hookstate (FXS only): Onhook I have configured a "ZAP Trunk (DAHDI compatibility Mode)" with the ZAP identifier 1 and an outbound route, but when ever I try to make an external call via it I get the "All Circuits are busy now, please try your call again later message". The FXO module is directly connected to our phone line from BT via a BT-RJ11 cable. I'm guessing I've missed a configuration step somewhere but no idea where, any help greatly appreciated.

  Read the article

• VMWare Network bug in multiple VMWare Workstation versions if using a hardcoded IP address

  - by onyxruby

  I'm having a very tricky problem with some of my VM sessions being unable to reach the Internet or even ping the gateway. I have just set up a new VM Workstation (7) on a W2K8 64bit server (I'll be converting to ESXI 4 once I can find a decent book on it, so for the meanwhile I use workstation). I have imported a number of VM's and setup some new ones on the server.In short the problem with some of the VM's being unable to reach the Internet is that they can't reach the gateway. I've looking at a number of things and can pretty safely rule out the following: Switch, Router, DHCP Server, DNS, Client IP configuration, Routes and typos. The problem is that some of the new clients cannot reach the gateway if their IP address is hardcoded, they can't even ping it by IP address. That rules out DNS and DHCP. Now, if I allow them to get their IP address by DHCP they can reach the gateway and Internet without issue. The interesting thing on this, is that this behavior occurs even if I leave the DNS information hardcoded under TCP/IP settings. It doesn't work unless the IP and gateway are handed out by DHCP even though the same information IP info is being used by the host. Fundamentally from the standpoint of the clients, they are trying to reach the exact same gateway using the exact same IP information regardless of whether they are hardcoded or assigned by DHCP. Here's an example of one client. IP Address 192.168.7.66 - Subnet Mask 255.255.255.0 - Gateway 192.168.7.254 - DNS1 192.168.7.44 - DNS2 192.168.7.254. The issue occurs across six different microsoft operating systems, Windows 7 and Windows 2008 variants all have the issue. My W2K3, XP, Vista and W98 clients all work without issue with hardcoded IP addresses. I have tried things like rearranging the DNS order, flushing DNS and so on. It's not a routing or switch issue as the clients can work just fine if they get their IP by DHCP. It's not a paramater issue as the exact same paramaters are handed out by DHCP as I plug in by hand. It's not a DNS issue as clients cant reach other clients even with IP addresses only. I have run a tracert to the gateway by IP address and it times out on the very first hop before failing on hop3 with destination host unreachable. If I get the IP address by DHCP the tracert finds the gateway (and Internet) without issue. I have read a few other posts online in forums talking about this problem randomly occuring over the years in other VM versions as well, so I suspect some kind of long standing bug. Does anyone have any ideas on this? Is it possibly a bug with Windows 7 and W2K clients under VM?

  Read the article

• Glassfish V3 won't start

  - by Zakaria

  Hi everybody, I installed NetBeans 6.8 and tried to run the GlasshFish V3 server. I'm working under Windows Vista 32 Bits. First, it won't run. Then I modified the c:\Windows\System32\drivers\etc\hosts file and put the following line into it: 127.0.0.1 localhost And when I run the GlasshFish V3 Server, no error is showing but only "INFOs" are displayed: 3 avr. 2010 19:23:19 com.sun.enterprise.glassfish.bootstrap.ASMain main INFO: Launching GlassFish on Felix platform Welcome to Felix ================ INFO: Perform lazy SSL initialization for the listener 'http-listener-2' INFO: Starting Grizzly Framework 1.9.18-k - Sat Apr 03 19:23:24 CEST 2010 INFO: Starting Grizzly Framework 1.9.18-k - Sat Apr 03 19:23:25 CEST 2010 INFO: Grizzly Framework 1.9.18-k started in: 423ms listening on port 35127 INFO: GlassFish v3 (74.2) startup time : Felix(4456ms) startup services(1709ms) total(6165ms) INFO: Grizzly Framework 1.9.18-k started in: 459ms listening on port 35116 INFO: Grizzly Framework 1.9.18-k started in: 428ms listening on port 35155 INFO: Grizzly Framework 1.9.18-k started in: 470ms listening on port 35160 INFO: Grizzly Framework 1.9.18-k started in: 513ms listening on port 35159 INFO: javassist.util.proxy.ProxyFactory.classLoaderProvider = org.glassfish.weld.WeldActivator$GlassFishClassLoaderProvider@5be8f4 INFO: Hibernate Validator bean-validator-3.0-JBoss-4.0.2 INFO: Binding RMI port to *:35165 INFO: Instantiated an instance of org.hibernate.validator.engine.resolver.JPATraversableResolver. INFO: JMXStartupService: Started JMXConnector, JMXService URL = service:jmx:rmi://PC-de-Charlotte:35165/jndi/rmi://PC-de-Charlotte:35165/jmxrmi INFO: Using com.sun.enterprise.transaction.jts.JavaEETransactionManagerJTSDelegate as the delegate INFO: [Thread[GlassFish Kernel Main Thread,5,main]] started INFO: Grizzly Framework 1.9.18-k started in: 150ms listening on port 35159 INFO: Perform lazy SSL initialization for the listener 'http-listener-2' INFO: {felix.fileinstall.poll (ms) = 5000, felix.fileinstall.dir = C:\Program Files\sges-v3\glassfish\modules\autostart, felix.fileinstall.debug = 1, felix.fileinstall.bundles.new.start = true, felix.fileinstall.tmpdir = C:\Users\CHARLO~1\AppData\Local\Temp\fileinstall-330907148519261411, felix.fileinstall.filter = null} INFO: {felix.fileinstall.poll (ms) = 5000, felix.fileinstall.dir = C:\Users\Charlotte\.netbeans\6.8\GlassFish_v3\autodeploy\bundles, felix.fileinstall.debug = 1, felix.fileinstall.bundles.new.start = true, felix.fileinstall.tmpdir = C:\Users\CHARLO~1\AppData\Local\Temp\fileinstall-2938963288421854459, felix.fileinstall.filter = null} INFO: Grizzly Framework 1.9.18-k started in: 95ms listening on port 35160 INFO: Updating configuration from org.apache.felix.fileinstall-autodeploy-bundles.cfg INFO: Installed C:\Program Files\sges-v3\glassfish\modules\autostart\org.apache.felix.fileinstall-autodeploy-bundles.cfg INFO: {felix.fileinstall.poll (ms) = 5000, felix.fileinstall.dir = C:\Users\Charlotte\.netbeans\6.8\GlassFish_v3\autodeploy\bundles, felix.fileinstall.debug = 1, felix.fileinstall.bundles.new.start = true, felix.fileinstall.tmpdir = C:\Users\CHARLO~1\AppData\Local\Temp\fileinstall-6474085409014899009, felix.fileinstall.filter = null} And there is no message such as "Glassfish started"! So, when I try to access to the admin web interface: localhost:4848 or localhost:8080 or localhost:8181 , It doesn't work. What should I do? Thank you very much, Regards.

  Read the article

• Cannot exclude a path from basic auth when using a front controller script

  - by Adam Monsen

  I have a small PHP/Apache2 web application wherein I'd like to do two seemingly incompatible operations: Route all requests through a single PHP script (a "front controller", if you will) Secure everything except API calls with HTTP basic authentication I can satisfy either requirement just fine in isolation, it's when I try to do both at once that I am blocked. For no good reason I'm trying to accomplish these requirements solely with Apache configuration. Here are the requirements stated as an example. A GET request for this URL: http://basic/api/listcars?max=10 should be sent through front.php without requiring basic auth. front.php will get /api/listcars?max=10 and do whatever it needs to with that. Here's what I think should work. In my /etc/hosts I added 127.0.0.1 basic and I am using this Apache config: <Location /> AuthType Basic AuthName "Home Secure" AuthUserFile /etc/apache2/passwords require valid-user </Location> <VirtualHost *:80> ServerName basic DocumentRoot /var/www/basic <Directory /var/www/basic> <IfModule mod_rewrite.c> RewriteEngine On RewriteCond %{SCRIPT_FILENAME} !-f RewriteCond %{SCRIPT_FILENAME} !-d RewriteRule ^(.*)$ /front.php/$1 [QSA,L] </IfModule> </Directory> <Location /api> Order deny,allow Allow from all Satisfy any </Location> </VirtualHost> But I still always get a HTTP 401: Authorization Required response. I can make it work by changing <Location /api> into <Location ~ /api> but this allows more than I want to past basic auth. I also tried changing the <Directory /var/www/basic> section into <Location />, but this doesn't work either (and it results in some strange values for PATH_TRANSLATED being passed to the script). I searched around and found many examples of selective exclusion of basic auth, but none that also incorporated a front controller. I could certainly do something like handle basic auth in the front controller, but if I can have Apache do that instead I'll be able to keep all authentication logic out of my PHP code. A friend suggested splitting this into two vhosts, which I know also works. This used to be two separate vhosts, actually. I'm using Apache 2.2.22 / PHP 5.3.10 on Ubuntu 12.04.

  Read the article

• Solaris ldap Authentication

  - by Tman

  Hi everyone Iv been having a trouble trying to get my Solaris 10 server to authenticate against an eDir server.im managed to Set up my linux(RHeL,SLES) servers to authenticate against the ldap Server.which works fine. Here is my configuration Files. ldapclient list: NS_LDAP_FILE_VERSION= 2.0 NS_LDAP_BINDDN= cn=proxyuser,o=AEDev NS_LDAP_BINDPASSWD= {NS1}ecfa88f3a945c22222233 NS_LDAP_SERVERS= 192.168.0.19 NS_LDAP_SEARCH_BASEDN= ou=auth,o=AEDev NS_LDAP_AUTH= simple NS_LDAP_SEARCH_SCOPE= sub NS_LDAP_CACHETTL= 0 NS_LDAP_CREDENTIAL_LEVEL= anonymous NS_LDAP_SERVICE_SEARCH_DESC= group:ou=Groups,ou=auth,o=AEDev NS_LDAP_SERVICE_SEARCH_DESC= shadow:ou=users,ou=auth,o=AEDev?sub?objectClass=shadowAccount NS_LDAP_SERVICE_SEARCH_DESC= passwd:ou=auth,o=AEDev?sub?objectClass=posixAccount NS_LDAP_BIND_TIME= 10 NS_LDAP_SERVICE_AUTH_METHOD= pam_ldap:simple getent passwd works fine: root:x:0:0:Super-User:/:/sbin/sh daemon:x:1:1::/: bin:x:2:2::/usr/bin: sys:x:3:3::/: adm:x:4:4:Admin:/var/adm: lp:x:71:8:Line Printer Admin:/usr/spool/lp: uucp:x:5:5:uucp Admin:/usr/lib/uucp: nuucp:x:9:9:uucp Admin:/var/spool/uucppublic:/usr/lib/uucp/uucico smmsp:x:25:25:SendMail Message Submission Program:/: listen:x:37:4:Network Admin:/usr/net/nls: gdm:x:50:50:GDM Reserved UID:/: webservd:x:80:80:WebServer Reserved UID:/: postgres:x:90:90:PostgreSQL Reserved UID:/:/usr/bin/pfksh svctag:x:95:12:Service Tag UID:/: nobody:x:60001:60001:NFS Anonymous Access User:/: noaccess:x:60002:60002:No Access User:/: nobody4:x:65534:65534:SunOS 4.x NFS Anonymous Access User:/: tlla:x:2012:100::/home/tlla: test:x:2011:100::/home/test: thato:x:2010:100::/home/thato: pam.conf login auth sufficient pam_unix_auth.so.1 #server_policy login auth sufficient /usr/lib/security/pam_ldap.so.1 try_first_pass login auth required pam_dial_auth.so.1 rlogin auth sufficient pam_rhosts_auth.so.1 rlogin auth requisite pam_authtok_get.so.1 rlogin auth required pam_dhkeys.so.1 rlogin auth required pam_unix_cred.so.1 rlogin auth sufficient pam_unix_auth.so.1 rlogin auth sufficient /usr/lib/security/pam_ldap.so.1 try_first_pass rsh auth sufficient pam_rhosts_auth.so.1 rsh auth required pam_unix_cred.so.1 rsh auth sufficient pam_unix_auth.so.1 #server_policy rsh auth sufficient /usr/lib/security/pam_ldap.so.1 try_first_pass other auth requisite pam_authtok_get.so.1 other auth required pam_dhkeys.so.1 other auth required pam_unix_cred.so.1 other auth sufficient pam_unix_auth.so.1 other auth sufficient /usr/lib/security/pam_ldap.so.1 try_first_pass passwd auth required pam_passwd_auth.so.1 passwd auth sufficient pam_unix_auth.so.1 ssh account sufficient pam_unix.so.1 ssh account sufficient /usr/lib/security/pam_ldap.so.1 try_first_pass other account requisite pam_roles.so.1 other account sufficient pam_unix_account.so.1 other account sufficient /usr/lib/security/pam_ldap.so.1 try_first_pass other password required pam_dhkeys.so.1 other password requisite pam_authtok_get.so.1 other password requisite pam_authtok_check.so.1 other password required pam_authtok_store.so.1 other password sufficient pam_unix.so.1 other password sufficient /usr/lib/security/pam_ldap.so.1 try_first_pass Local Authentication Works But LDAP Authentication Doesn't Work.

  Read the article

• Basic Auth on DirectoryIndex Only

  - by Brad

  I am trying to configure basic auth for my index file, and only my index file. I have configured it like so: <Files index.htm> Order allow,deny Allow from all AuthType Basic AuthName "Some Auth" AuthUserFile "C:/path/to/my/.htpasswd" Require valid-user </Files> When I visit the page, 401 Authorization Required is returned as expected, but the browser doesn't prompt for the username/password. Some further inspection has revealed that Apache is not sending the WWW-Authenticate header. GET http://myhost/ HTTP/1.1 Host: myhost Connection: keep-alive User-Agent: Mozilla/5.0 (Windows NT 5.1) AppleWebKit/534.30 (KHTML, like Gecko) Chrome/12.0.742.100 Safari/534.30 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Encoding: gzip,deflate,sdch Accept-Language: en-US,en;q=0.8 Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3 HTTP/1.1 401 Authorization Required Date: Tue, 21 Jun 2011 21:36:48 GMT Server: Apache/2.2.16 (Win32) Content-Length: 401 Keep-Alive: timeout=5, max=100 Connection: Keep-Alive Content-Type: text/html; charset=iso-8859-1 <!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN"> <html><head> <title>401 Authorization Required</title> </head><body> <h1>Authorization Required</h1> <p>This server could not verify that you are authorized to access the document requested. Either you supplied the wrong credentials (e.g., bad password), or your browser doesn't understand how to supply the credentials required.</p> </body></html> Why is Apache doing this? How can I configure it to send that header appropriately? It is worth noting that this exact same set of directives work fine if I set them for a whole directory. It is only when I configure them to a directory index that they do not work. This is how I know my .htpasswd and such are fine. I am using Apache 2.2 on Windows. On another note, I found this listed as a bug in Apache 1.3. This leads me to believe that this is actually a configuration problem on my end.

  Read the article

• ESXi 5.1 ghettoVCB stuck at Clone: 10% done

  - by stormdrain

  Trying to run ghettoVCB for the first time here. I am using a NAS that is set up as a datastore on the host. I did a dry run and it completed without error. The VM is ~500GB and there is only one on the host that I'm trying to backup. I proceeded to start the actual backup: ./ghettoVCB.sh -m vmname -g ghettoVCB.conf It goes though the config and looks like it's taking off: 2013-10-24 11:43:19 -- info: CONFIG - USING GLOBAL GHETTOVCB CONFIGURATION FILE = ghettoVCB.conf 2013-10-24 11:43:19 -- info: CONFIG - VERSION = 2013_01_11_0 2013-10-24 11:43:19 -- info: CONFIG - GHETTOVCB_PID = 17398616 2013-10-24 11:43:19 -- info: CONFIG - VM_BACKUP_VOLUME = /vmfs/volumes/nas2tb-001/esxi4 2013-10-24 11:43:19 -- info: CONFIG - VM_BACKUP_ROTATION_COUNT = 3 2013-10-24 11:43:19 -- info: CONFIG - VM_BACKUP_DIR_NAMING_CONVENTION = 2013-10-24_11-43-18 2013-10-24 11:43:19 -- info: CONFIG - DISK_BACKUP_FORMAT = thin 2013-10-24 11:43:19 -- info: CONFIG - POWER_VM_DOWN_BEFORE_BACKUP = 0 2013-10-24 11:43:19 -- info: CONFIG - ENABLE_HARD_POWER_OFF = 0 2013-10-24 11:43:19 -- info: CONFIG - ITER_TO_WAIT_SHUTDOWN = 4 2013-10-24 11:43:19 -- info: CONFIG - POWER_DOWN_TIMEOUT = 5 2013-10-24 11:43:19 -- info: CONFIG - SNAPSHOT_TIMEOUT = 15 2013-10-24 11:43:19 -- info: CONFIG - LOG_LEVEL = info 2013-10-24 11:43:19 -- info: CONFIG - BACKUP_LOG_OUTPUT = /tmp/ghettoVCB-2013-10-24_11-43-18-17398616.log 2013-10-24 11:43:19 -- info: CONFIG - ENABLE_COMPRESSION = 0 2013-10-24 11:43:19 -- info: CONFIG - VM_SNAPSHOT_MEMORY = 0 2013-10-24 11:43:19 -- info: CONFIG - VM_SNAPSHOT_QUIESCE = 0 2013-10-24 11:43:19 -- info: CONFIG - ALLOW_VMS_WITH_SNAPSHOTS_TO_BE_BACKEDUP = 0 2013-10-24 11:43:19 -- info: CONFIG - VMDK_FILES_TO_BACKUP = all 2013-10-24 11:43:19 -- info: CONFIG - VM_SHUTDOWN_ORDER = 2013-10-24 11:43:19 -- info: CONFIG - VM_STARTUP_ORDER = 2013-10-24 11:43:19 -- info: CONFIG - EMAIL_LOG = 0 2013-10-24 11:43:19 -- info: 2013-10-24 11:43:22 -- info: Initiate backup for vmname 2013-10-24 11:43:22 -- info: Creating Snapshot "ghettoVCB-snapshot-2013-10-24" for serv2 Destination disk format: VMFS thin-provisioned Cloning disk '/vmfs/volumes/esxi4-storage/vmname/vmname_1.vmdk'... Clone: 10% done. and it's been that way for over an hour now. Stuck at Clone: 10% done.. Thing is: I can see the vmdk on the NAS. And it looks like almost the whole thing is there. On the NAS it's showing ~430GB but on vSphere Client Summary is shows as 507GB. I don't see the vmdk on the NAS growing any more. The logfile mimics some of the above and is sitting at "Creating Snapshot..." and nothing else is coming in. Is the vmdk on the NAS showing all those GB because of the provisioning or something? i.e. is the size of the file not necessarily indicative of the amount of actual data that has been copied? Is there are reason it might be "Stuck" at 10%? i.e. could it really be taking this long? Any other tips? Thanks. Edit: as soon as I hit the Submit button, I glance over to see that it has incremented to 11% done. Good to know it'll be complete sometime around when the sun explodes.

  Read the article

• Confusion on networking service start/stop in Ubuntu

  - by Daniel Ball

  I'm preparing to move and took down two of my servers, leaving only one with some essential services running. What I neglected to consider was that one was the DHCP server(which I realized when somebody contacted me saying they couldn't connect. Whups). So because I only have a few hosts on this small network, I opted to just statically configure them for now. One of these is a new Ubuntu 11.04 server, where I have very little experience. I edited /etc/network/interfaces and /etc/hosts to reflect my changes. I ran $sudo /etc/init.d/networking stop *deconfiguring network interfaces ... So yay. Then I try to start, it gives me the mumbo jumbo about using services (why didn't it do that for the stop?) So instead I run ... $sudo service networking start networking stop/waiting Now, to me that says the status of the service is stopped. But when I ping another computer, I get a successful reply. So is it not actually stopped? More importantly, am I doing something wrong? Edit daniel@FOOBAR:~$ sudo service networking status networking stop/waiting daniel@FOOBAR:~$ sudo service networking stop stop: Unknown instance: daniel@FOOBAR:~$ sudo service networking status networking stop/waiting daniel@FOOBAR:~$ sudo service networking start networking stop/waiting daniel@FOOBAR:~$ sudo service networking status networking stop/waiting So you can see why I ran /etc/init.d/networking stop instead. For some reason upstart (that is what "services" is, right?) isn't working with stop. cat /etc/hosts 127.0.0.1 localhost 127.0.1.1 FOOBAR 198.3.9.2 FOOBAR #Added entry July 19 2011 # The following lines are desirable for IPv6 capable hosts ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface #auto eth0 #iface eth0 inet dhcp # hostname FOOBAR auto eth0 iface eth0 inet static address 198.3.9.2 netmask 255.255.255.0 network 198.3.9.0 broadcast 198.3.9.255 gateway 198.3.9.15 No I didn't save backups, it was just a minor change so I just commented out the old DHCP setting. Edit I set everything back to original settings and set up a DHCP server. "starting" networking does the same thing. I can only assume this is normal, I just don't know WHY. It can't be anything to do with the configuration files, since they've been restored.

  Read the article

• Old operational master still thinks it is the "one"

  - by Doug

  Hi there, I have a domain with 3 AD servers for now i'll just call them: AD01 (Win 2008 GC, Operations master) AD02 (Win 2008 GC) AD03 (Win 2003 GC) A couple of months there was some hardware issues with AD01 so the operations master, PDC and Infrastructure Master was moved to AD02. All machines where on while this was happening. AD01 (Win 2008 GC) AD02 (Win 2008 GC, Operations master) AD03 (Win 2003 GC) AD01 was then shutdown for a month. Upon starting this machine up with replaced hardware (NIC and RAID card) i now have a weird problem. AD01 Thinks it is operations master still in AD on the local box AD02 & AD03 Thinks AD02 is operations master in AD on both boxes When running DCDIAG on AD01 i get a number of issues (listed below) When running "dcdiag /test:advertising" on AD01: Doing primary tests Testing server: Default-First-Site-Name\AD01 Starting test: Advertising Warning: DsGetDcName returned information for \\ad02.domain.local, when we were trying to reach AD01. SERVER IS NOT RESPONDING or IS NOT CONSIDERED SUITABLE. ......................... AD01 failed test Advertising Running partition tests on : ForestDnsZones Running partition tests on : DomainDnsZones Running partition tests on : Schema Running partition tests on : Configuration Running partition tests on : domain Running enterprise tests on : domain.local When running "dcdiag" on AD01 i get the following errors (excerpt of the Final output): Testing server: Default-First-Site-Name\AD01 Starting test: Advertising Warning: DsGetDcName returned information for \\ad02.domain.local, when we were trying to reach AD01. SERVER IS NOT RESPONDING or IS NOT CONSIDERED SUITABLE. ......................... AD01 failed test Advertising Starting test: FrsEvent There are warning or error events within the last 24 hours after the SYSVOL has been shared. Failing SYSVOL replication problems may cause Group Policy problems. Starting test: NCSecDesc Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have Replicating Directory Changes In Filtered Set access rights for the naming context: DC=ForestDnsZones,DC=domain,DC=local Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have Replicating Directory Changes In Filtered Set access rights for the naming context: DC=DomainDnsZones,DC=domain,DC=local Starting test: Replications [Replications Check,Replications Check] Inbound replication is disabled. To correct, run "repadmin /options AD01 -DISABLE_INBOUND_REPL" [Replications Check,AD01] Outbound replication is disabled. To correct, run "repadmin /options AD01 -DISABLE_OUTBOUND_REPL" So the problem appeasr to be that when i moved the operations master, AD01 never got the memo, and now that it's started up, all the other AD servers don't think its the boss anymore when it trys to replicate etc. So i really need to manually update AD01 so that it knows who the operations master, instrastructure and PDC is - but i'm not having any luck I've been googling for nearly a day and all solutions lead to "the cake is a lie" Your ninja skills will be greatly appreciated

  Read the article

• multiple webapps in tomcat -- what is the optimal architecture?

  - by rvdb

  I am maintaining a growing base of mainly Cocoon-2.1-based web applications [http://cocoon.apache.org/2.1/], deployed in a Tomcat servlet container [http://tomcat.apache.org/], and proxied with an Apache http server [http://httpd.apache.org/docs/2.2/]. I am conceptually struggling with the best way to deploy multiple web applications in Tomcat. Since I'm not a Java programmer and we don't have any sysadmin staff I have to figure out myself what is the most sensible way to do this. My setup has evolved through 2 scenarios and I'm considering a third for maximal separation of the distinct webapps. [1] 1 Tomcat instance, 1 Cocoon instance, multiple webapps -tomcat |_ webapps |_ webapp1 |_ webapp2 |_ webapp[n] |_ WEB-INF (with Cocoon libs) This was my first approach: just drop all web applications inside a single Cocoon webapps folder inside a single Tomcat container. This seemed to run fine, I did not encounter any memory issues. However, this poses a maintainability drawback, as some Cocoon components are subject to updates, which often affect the webapp coding. Hence, updating Cocoon becomes unwieldy: since all webapps share the same pool of Cocoon components, updating one of them would require the code in all web applications to be updated simultaneously. In order to isolate the web applications, I moved to the second scenario. [2] 1 Tomcat instance, each webapp in its dedicated Cocoon environment -tomcat |_ webapps |_ webapp1 | |_ WEB-INF (with Cocoon libs) |_ webapp1 | |_ WEB-INF (with Cocoon libs) |_ webapp[n] |_ WEB-INF (with Cocoon libs) This approach separates all webapps into their own Cocoon environment, run inside a single Tomcat container. In theory, this works fine: all webapps can be updated independently. However, this soon results in PermGenSpace errors. It seemed that I could manage the problem by increasing memory allocation for Tomcat, but I realise this isn't a structural solution, and that overloading a single Tomcat in this way is prone to future memory errors. This set me thinking about the third scenario. [3] multiple Tomcat instances, each with a single webapp in its dedicated Cocoon environment -tomcat |_ webapps |_ webapp1 |_ WEB-INF (with Cocoon libs) -tomcat |_ webapps |_ webapp2 |_ WEB-INF (with Cocoon libs) -tomcat |_ webapps |_ webapp[n] |_ WEB-INF (with Cocoon libs) I haven't tried this approach, but am thinking of the $CATALINA_BASE variable. A single Tomcat distribution can be multiply instanciated with different $CATALINA_BASE environments, each pointing to a Cocoon instance with its own webapp. I wonder whether such an approach could avoid the structural memory-related problems of approach [2], or will the same issues apply? On the other hand, this approach would complicate management of the Apache http frontend, as it will require the AJP connectors of the different Tomcat instances to be listening at different ports. Hence, Apache's worker configuration has to be updated and reloaded whenever a new webapp (in its own Tomcat instance) is added. And there seems no way to reload worker.properties without restarting the entire Apache http server. Is there perhaps another / more dynamic way of 'modularizing' multiple Tomcat-served webapps, or can one of these scenarios be refined? Any thoughts, suggestions, advice much appreciated. Ron

  Read the article

• uploading via http post (multipart/form-data) silently fails with big files

  - by matteo

  When uploading multipart/form-data forms via a http post request to my apache web server, very big files (i.e. 30MB) are silently discarded. On the server side all looks as if the attached file was received with 0 bytes size. On the client side all looks like it had been uploaded succesfully (it takes the expected long time to upload and the browser gives no error message). On the server, nothing is logged into the error log. An entry is logged into the access log as if everything was ok (a post request and a 200 ok response). These uploads are being posted to a php script. In the php script, If I print_r $_FILES, I see the following information for the relevant file: [file5] => Array ( [name] => MOV023.3gp [type] => video/3gpp [tmp_name] => /tmp/phpgOdvYQ [error] => 0 [size] => 0 ) Note both [error] = 0 (which should mean no error) and [size] = 0 (as if the file was empty). My php script runs fine and receives all the rest of the data except these files. move_uploaded_file succeeds on these files and actually copies them as 0byte files. I've already changed the php directives max_upload_size to 50M and post_max_size to 200M, so neither the single file nor the request exceed any size limit. max_execution_time is not relevant, because the time to transfer the data does not count; and I've increased max_input_time to 1000 seconds, though this shouldn't be necessary since this is the time taken to parse the input data, not the time taken to upload it. Is there any apache configuration, prior to php, that could be causing these files to be discarded even prior to php execution? Some limit in size or in upload time? I've read about a default 300 seconds timeout limit, but this should apply to the time the connection is idle, not the time it takes while actually transferring data, right? Needless to say, uploads with all exactly identical conditions (including file format, client and everything) except smaller file size, work seamlessly, so the issue is clearly related to the file or request size, or to the time it takes to send it.

  Read the article

• Can't connect to DeploymentShare$ from PC attempting to MDT, but can other PCs on the network

  - by Moman10

  I am in the process of setting up MDT and have run across a problem. MDT is installed on a Windows 2012 server, MDT version 6.2.5019.0. Using WDS as well. Active Directory domain, the server is up to date and on the network. I boot up the PC, it gets an address from DHCP, pulls down the LiteTouchPE_x64.wim image and goes into the MS Solution Accelerators screen, the Processing Bootstrap Settings box comes up and processes for a couple of seconds, then goes away, it sits there for another minute or so and then gives the error: A connection to the deployment share (\\Acme-MDT\DeploymentShare$) could not be made. Can not reach the DeployRoot. Possible Cause: Network Routing error or Network Configuration Error." I can then retry or cancel. I have seen this error online but so far nothing that helps fix it, but seems to be an issue with the FQDN. I verified that I am getting an IP address and that I can successfully ping the MDT server if I use the FQDN, but can not just by it's A record of Acme-MDT. I tried manually mapping the network share using net use and it works if I use the FQDN, but it fails with an error code 53, "Network path not found" if I just use the A record of Acme-MDT. Here is the net use command I'm using: net use * \\Acme-MDT\DeploymentShare$ /u:Domain\Administrator It gives the error System Error 53, Network path not found (and doesn't prompt for a password), but if I use the FQDN of \\Acme-MDT.domain.com\DeploymentShare$ it works fine to map the drive. I guess the problem is, when it tries to load the image, it is trying to start from \\Acme-MDT\DeploymentShare$ and I need it to start from \\Acme-MDT.domain.com\DeploymentShare$, but not sure how to get it to do that. I've put the fully qualified path in CustomSettings.ini and bootstrap, updated the deployment share, regenerated the boot image and replaced the boot wim in WDS. Or, if someone has an idea as to why it's acting this way and knows a way around it. The end result is what matters! :) I did verify in DNS that Acme-MDT is there, with the proper IP, and I can successfully use the net use command to map this drive from a couple other computers that are already on the network. I am assuming it has something to do with that computer not already being part of the domain, but I'm honestly at a loss as to how to fix it. Any ideas are appreciated, thanks in advance for your help!

  Read the article

• Graphite SQLite3 DatabaseError: attempt to write a readonly database

  - by Anadi Misra

  Running graphite under apache httpd, with slqite database, I have the correct folder permissions [root@liaan55 httpd]# ls -ltr /var/lib | grep graphite drwxr-xr-x. 2 apache apache 4096 Aug 23 19:36 graphite-web and [root@liaan55 httpd]# ls -ltr /var/lib/graphite-web/ total 68 -rw-r--r--. 1 apache apache 65536 Aug 23 19:46 graphite.db syncdb also seems to have gone fine [root@liaan55 httpd]# sudo -su apache bash-4.1$ whoami apache bash-4.1$ python /usr/lib/python2.6/site-packages/graphite/manage.py syncdb /usr/lib/python2.6/site-packages/graphite/settings.py:231: UserWarning: SECRET_KEY is set to an unsafe default. This should be set in local_settings.py for better security warn('SECRET_KEY is set to an unsafe default. This should be set in local_settings.py for better security') /usr/lib/python2.6/site-packages/django/conf/__init__.py:75: DeprecationWarning: The ADMIN_MEDIA_PREFIX setting has been removed; use STATIC_URL instead. "use STATIC_URL instead.", DeprecationWarning) /usr/lib/python2.6/site-packages/django/core/cache/__init__.py:82: DeprecationWarning: settings.CACHE_* is deprecated; use settings.CACHES instead. DeprecationWarning Creating tables ... Creating table account_profile Creating table account_variable Creating table account_view Creating table account_window Creating table account_mygraph Creating table dashboard_dashboard_owners Creating table dashboard_dashboard Creating table events_event Creating table auth_permission Creating table auth_group_permissions Creating table auth_group Creating table auth_user_user_permissions Creating table auth_user_groups Creating table auth_user Creating table django_session Creating table django_admin_log Creating table django_content_type Creating table tagging_tag Creating table tagging_taggeditem You just installed Django's auth system, which means you don't have any superusers defined. Would you like to create one now? (yes/no): yes Username (leave blank to use 'apache'): root E-mail address: [email protected] Password: Password (again): Superuser created successfully. Installing custom SQL ... Installing indexes ... Installed 0 object(s) from 0 fixture(s) bash-4.1$ exit and the local-settings.py file is as follows STORAGE_DIR = '/var/lib/graphite-web' INDEX_FILE = '/var/lib/graphite-web/index' DATABASES = { 'default': { 'NAME': '/var/lib/graphite-web/graphite.db', 'ENGINE': 'django.db.backends.sqlite3', 'USER': '', 'PASSWORD': '', 'HOST': '', 'PORT': '' } } I still get this error [Sat Aug 23 19:47:17 2014] [error] [client 10.42.33.238] File "/usr/lib/python2.6/site-packages/django/db/backends/sqlite3/base.py", line 344, in execute [Sat Aug 23 19:47:17 2014] [error] [client 10.42.33.238] return Database.Cursor.execute(self, query, params) [Sat Aug 23 19:47:17 2014] [error] [client 10.42.33.238] DatabaseError: attempt to write a readonly database not sure what is missing in this configuration

  Read the article

• GRUB 2 freezing at OS selection screen, what could be the cause?

  - by Michael Kjörling

  Mains power is somewhat unreliable where I live, so every now and then, the computer gets rebooted when the PSU can't maintain proper voltage during a brown-out or momentary black-out. It's happened a few times recently that when power is restored, the BIOS POST completes successfully, GRUB starts to load and then freezes. I've seen this at the Welcome to GRUB! message, but it seems to happen more often just past the switch to the graphical OS list. At this point, the computer will not respond to anything (arrow keys, control commands, Ctrl+Alt+Del, ...) - it simply sits there displaying this image, seemingly doing nothing more. At that point, turning the computer off using the power button and letting it sit for a while (cooling down?) has allowed it to boot successfully. Turning the computer off and immediately back on seems to give the same result (successful POST then freeze in GRUB). This behavior began recently, although does not seem to be directly correlated with my hard disk woes (although it may be relevant that GRUB resides on that physical disk, I don't know). Once the computer has booted, it runs without a hitch. I know that a "proper" solution would be to invest in a UPS, but what might be causing behavior like this? I was thinking in terms of perhaps the CPU shutting down as a thermal control measure, but if that was the cause then wouldn't I see similar freezes during use (which I do not)? What else could cause freezes apparently closely but not perfectly related to the BIOS handover from POST to OS bootloader? The BIOS settings are to reset to previous power status after a power loss. Since the PC in question is almost always turned on, this means restore to full power status. I have no expansion cards installed that make any BIOS extensions known by screen output during the boot process, at least, but I do have a few expansion cards installed. Haven't made any changes in that regard in a long time, now. I haven't touched GRUB itself for a long time, whether configuration or binaries, so I don't think that's the problem. Also, it doesn't really make sense that a bug in GRUB would manifest itself only once in a blue moon but significantly more often after a power failure.

  Read the article

< Previous Page | 551 552 553 554 555 556 557 558 559 560 561 562  | Next Page >