Search Results

Search found 15665 results on 627 pages for 'inno setup'.

Page 556/627 | < Previous Page | 552 553 554 555 556 557 558 559 560 561 562 563  | Next Page >

• No HDMI Audio with GeForce 9600GT and nForce board

  - by Bobby

  I've been trying to get HDMI with sound working for the last few days, and I'm a little bit out of ideas. (I've verified that the hardware/Setup works via Windows.) aplay does not list my HDMI device: $ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: NVidia [HDA NVidia], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: NVidia [HDA NVidia], device 1: ALC662 rev1 Digital [ALC662 rev1 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 I've already compiled the alsa drivers (1.0.24) from a snapshot (with --with-oss=no) and added the line options snd-hda-intel model=auto # Tried 3stack-dig and 6stack-dig too to /etc/modprobe.d/alsa-base.conf. Still, the device does not show up. If it is important, the HDMI TV is at the moment not configured to be part of the X session (I've tried that to, at least with X restart, and it didn't change anything). What did I miss? $ lspci 00:00.0 Host bridge: nVidia Corporation Device 07c3 (rev a2) 00:00.1 RAM memory: nVidia Corporation nForce 630i memory controller (rev a2) 00:01.0 RAM memory: nVidia Corporation nForce 630i memory controller (rev a1) 00:01.1 RAM memory: nVidia Corporation nForce 630i memory controller (rev a1) 00:01.2 RAM memory: nVidia Corporation nForce 630i memory controller (rev a1) 00:01.3 RAM memory: nVidia Corporation nForce 630i memory controller (rev a1) 00:01.4 RAM memory: nVidia Corporation nForce 630i memory controller (rev a1) 00:01.5 RAM memory: nVidia Corporation nForce 630i memory controller (rev a1) 00:01.6 RAM memory: nVidia Corporation nForce 630i memory controller (rev a1) 00:02.0 RAM memory: nVidia Corporation nForce 630i memory controller (rev a1) 00:03.0 ISA bridge: nVidia Corporation MCP73 LPC Bridge (rev a2) 00:03.1 SMBus: nVidia Corporation MCP73 SMBus (rev a1) 00:03.2 RAM memory: nVidia Corporation MCP73 Memory Controller (rev a1) 00:03.4 RAM memory: nVidia Corporation MCP73 Memory Controller (rev a1) 00:04.0 USB Controller: nVidia Corporation GeForce 7100/nForce 630i USB (rev a1) 00:04.1 USB Controller: nVidia Corporation MCP73 [nForce 630i] USB 2.0 Controller (EHCI) (rev a1) 00:08.0 IDE interface: nVidia Corporation MCP73 IDE (rev a1) 00:09.0 Audio device: nVidia Corporation MCP73 High Definition Audio (rev a1) 00:0a.0 PCI bridge: nVidia Corporation MCP73 PCI Express bridge (rev a1) 00:0b.0 PCI bridge: nVidia Corporation MCP73 PCI Express bridge (rev a1) 00:0c.0 PCI bridge: nVidia Corporation MCP73 PCI Express bridge (rev a1) 00:0d.0 PCI bridge: nVidia Corporation MCP73 PCI Express bridge (rev a1) 00:0e.0 IDE interface: nVidia Corporation MCP73 IDE (rev a2) 00:0f.0 Ethernet controller: nVidia Corporation MCP73 Ethernet (rev a2) 02:00.0 VGA compatible controller: nVidia Corporation G94 [GeForce 9600 GT] (rev a1)   $ aplay -L default pulse Playback/recording through the PulseAudio sound server front:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Front speakers surround40:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Digital IEC958 (S/PDIF) Digital Audio Output dmix:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Direct sample mixing device dmix:CARD=NVidia,DEV=1 HDA NVidia, ALC662 rev1 Digital Direct sample mixing device dsnoop:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Direct sample snooping device dsnoop:CARD=NVidia,DEV=1 HDA NVidia, ALC662 rev1 Digital Direct sample snooping device hw:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Direct hardware device without any conversions hw:CARD=NVidia,DEV=1 HDA NVidia, ALC662 rev1 Digital Direct hardware device without any conversions plughw:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Hardware device with all software conversions plughw:CARD=NVidia,DEV=1 HDA NVidia, ALC662 rev1 Digital Hardware device with all software conversions

  Read the article

• SOA Suite 11g Asynchronous Testing with soapUI

  - by Greg Mally

  Overview The Enterprise Manager test harness that comes bundled with SOA Suite 11g is a great tool for doing smoke tests and some minor load testing. When a more robust testing tool is needed, often times soapUI is leveraged for many reasons ranging from ease of use to cost effective. However, when you want to start doing some more complex testing other than synchronous web services with static content, then the free version of soapUI becomes a bit more challenging. In this blog I will show you how to test asynchronous web services with soapUI free edition. The following assumes that you have a working knowledge of soapUI and will not go into concepts like setting up a project etc. For the basics, please review the documentation for soapUI: http://www.soapui.org/Getting-Started/ Asynchronous Web Service Testing in soapUI When invoking an asynchronous web service, the caller must provide a callback for the response. Since our testing will originate from soapUI, then it is only natural that soapUI would provide the callback mechanism. This mechanism in soapUI is called a MockService. In a nutshell, a soapUI MockService is a simulation of a Web Service (aka, a process listening on a port). We will go through the steps in setting up the MockService for a simple asynchronous BPEL process. After creating your soapUI project based on an asynchronous BPEL process, you will see something like the following: Notice that soapUI created an interface for both the request and the response (i.e., callback). The interface that was created for the callback will be used to create the MockService. Right-click on the callback interface and select the Generate MockService menu item: You will be presented with the Generate MockService dialogue where we will tweak the Path and possibly the port (depends upon what ports are available on the machine where soapUI will be running). We will adjust the Path to include the operation name (append /processResponse in this example) and the port of 8088 is fine: Once the MockService is created, you should have something like the following in soapUI: This window acts as a console/view into the callback process. When the play button is pressed (green triangle in the upper left-hand corner), soapUI will start a process running on the configured Port that will accept web service invocations on the configured Path: At this point we are “almost” ready to try out the asynchronous test. But first we must provide the web service addressing (WS-A) configuration on the request message. We will edit the message for the request interface that was generated when the project was created (SimpleAsyncBPELProcessBinding > process > Request 1 in this example). At the bottom of the request message editor you will find the WS-A configuration by left-clicking on the WS-A label: Here we will setup WS-A by changing the default values to: Must understand: TRUE Add default wsa:Action: Add default wsa:Action (checked) Reply to: ${host where soapUI is running}:${MockService Port}${MockService Path} … in this example: http://192.168.1.181:8088/mockSimpleAsyncBPELProcessCallbackBinding/processResponse We now are ready to run the asynchronous test from soapUI free edition. Make sure that the MockService you created is running and then push the play button for the request (green triangle in the upper left-hand corner of the request editor). If everything is configured correctly, you should see the response show up in the MockService window: To view the response message/payload, just double-click on a response message in the Message Log window of the MockService: At this point you can now expand the project to include a Test Suite for some load balance tests etc. This same topic has been covered in various detail on other sites/blogs, but I wanted to simplify and detail how this is done in the context of SOA Suite 11g. It also serves as a nice introduction to another blog of mine: SOA Suite 11g Dynamic Payload Testing with soapUI Free Edition.

  Read the article

• Uncovering Compiler Errors in ASP.NET MVC Views

  - by Ben Griswold

  ASPX and ASCX files are compiled on the fly when they are requested on the web server. This means it’s possible that you aren’t catching compile errors associated with your views when you build your ASP.NET MVC project in Visual Studio.  Unless you’re willing to click through your entire application, rendering each view looking for errors, you application is left a little vulnerable to user issues.  Fortunately, there’s a work around.  Open up your MVC project file in notepad or within the Visual Studio IDE by unloading the project and then editing the .csproj file (both actions are available by right-clicking on the Project Node in Solution Explorer.)  Notice the MvcBuildViews option.  It’s probably set to false.  Flip the value to true and you’ll magically start compiling your views when you build your application. <MvcBuildViews>false</MvcBuildViews> Taking this action will slow down your builds a bit, but if you’re a hack like me, it’ll probably save your day in the long run. Now you’re probably thinking, “Neat trick – how’s it work?”  Scroll down toward the bottom of your csproj file and you will notice the AfterBuild target triggers the AspNetCompiler action if the MvcBuildViews option is set to true.  <Target Name="AfterBuild" Condition="'$(MvcBuildViews)'=='true'">   <AspNetCompiler VirtualPath="temp"                   PhysicalPath="$(ProjectDir)\..\$(ProjectName)" /> </Target> Great. One more thing. Let’s say you don’t want to slow down all of your builds, but you absolutely want to know if there are any compiler issues with your views before you commit your code to version control or deploy or whatever.  Here’s what you can do – change the AfterBuild condition to run if your configuration is set to Release mode.  <Target Name="AfterBuild" Condition="'$(Configuration)'=='Release'">   <!– Always pre-compile ASPX and ASCX in release mode –>   <AspNetCompiler VirtualPath="temp"                   PhysicalPath="$(ProjectDir)\..\$(ProjectName)" /> </Target> Now your debug mode builds will continue to be as fast as ever and you can quickly validate your views by building in release mode when you so choose.  There’s one little catch – this setup won’t consider the MvcBuildViews option whatsoever! So if you decide to go with this configuration, you might want to add a comment near the MvcBuildViews option letting other developers know they can change the MvcBuildViews option as much as they’d like but it’s not going to affect the AfterBuild action.  Or don’t include the comment and let your team members figure it out for themselves…

  Read the article

• IntelliTrace As a Learning Tool for MVC2 in a VS2010 Project

  - by Sam Abraham

  IntelliTrace is a new feature in Visual Studio 2010 Ultimate Edition. I see this valuable tool as a “Program Execution Recorder” that captures information about events and calls taking place as soon as we hit the VS2010 play (Start Debugging) button or the F5 key. Many online resources already discuss IntelliTrace and the benefit it brings to both developers and testers alike so I see no value of just repeating this information.  In this brief blog entry, I would like to share with you how I will be using IntelliTrace in my upcoming talk at the Ft Lauderdale ArcSig .Net User Group Meeting on April 20th 2010 (check http://www.fladotnet.com for more information), as a learning tool to demonstrate the internals of the lifecycle of an MVC2 application.  I will also be providing some helpful links that cover IntelliTrace in more detail at the end of my article for reference. IntelliTrace is setup by default to only capture execution events. Microsoft did such a great job on optimizing its recording process that I haven’t even felt the slightest performance hit with IntelliTrace running as I was debugging my solutions and projects.  For my purposes here however, I needed to capture more information beyond execution events, so I turned on the option for capturing calls in addition to events as shown in Figures 1 and 2. Changing capture options will require us to stop our debugging session and start over for the new settings to take place. Figure 1 – Access IntelliTrace options via the Tools->Options menu items Figure 2 – Change IntelliTrace Options to capture call information as well as events Notice the warning with regards to potentially degrading performance when selecting to capture call information in addition to the default events-only setting. I have found this warning to be sure true. My subsequent tests showed slowness in page load times compared to rendering those same exact pages with the “event-only” option selected. Execution recording is auto-started along with the new debugging session of our project. At this point, we can simply interact with the application and continue executing normally until we decide to “playback” the code we have executed so far.  For code replay, first step is to “break” the current execution as show in Figure 3.   Figure 3 – Break to replay recording A few tries later, I found a good process to quickly find and demonstrate the MVC2 page lifecycle. First-off, we start with the event view as shown in Figure 4 until we find an interesting event that needs further studying.  Figure 4 – Going through IntelliTrace’s events and picking as specific entry of interest We now can, for instance, study how the highlighted HTTP GET request is being handled, by clicking on the “Calls View” for that particular event. Notice that IntelliTrace shows us all calls that took place in servicing that GET request. Double clicking on any call takes us to a more granular view of the call stack within that clicked call, up until getting to a specific line of code where we can do a line-by-line replay of the execution from that point onwards using F10 or F11 just like our typical good old VS2008 debugging helped us accomplish. Figure 5 – switching to call view on an event of interest Figure 6 – Double clicking on call shows a more granular view of the call stack. In conclusion, the introduction of IntelliTrace as a new addition to the VS developers’ tool arsenal enhances development and debugging experience and effectively tackles the “no-repro” problem. It will also hopefully enhance my audience’s experience listening to me speaking about  an MVC2 page lifecycle which I can now easily visually demonstrate, thereby improving the probability of keeping everybody awake a little longer. IntelliTrace References: http://msdn.microsoft.com/en-us/magazine/ee336126.aspx http://msdn.microsoft.com/en-us/library/dd264944(VS.100).aspx

  Read the article

• Ubuntu 10.04 & IBM DS3524 with FC multipath, inactive path is [failed][faulty] instead of [active][ghost]

  - by Graeme Donaldson

  OK, this is my setup: FC Switches IBM/Brocade, Switch1 and Switch2, independent fabrics. Server IBM x3650 M2, 2x QLogic QLE2460, 1 connected to each FC Switch. Storage IBM DS3524, 2x controllers with 4x FC ports each, but only 2x connected on each. +-----------------------------------------------------------------------+ | HBA1 Server HBA2 | +-----------------------------------------------------------------------+ | | | | | | +-----------------------------+ +------------------------------+ | Switch1 | | Switch2 | +-----------------------------+ +------------------------------+ | | | | | | | | | | | | | | | | | | | | +-----------------------------------+-----------------------------------+ | Contr A, port 3 | Contr A, port 4 | Contr B, port 3 | Contr B, port 4 | +-----------------------------------+-----------------------------------+ | Storage | +-----------------------------------------------------------------------+ My /etc/multipath.conf is from the IBM redbook for the DS3500, except I use a different setting for prio_callout, IBM uses /sbin/mpath_prio_tpc, but according to http://changelogs.ubuntu.com/changelogs/pool/main/m/multipath-tools/multipath-tools_0.4.8-7ubuntu2/changelog, this was renamed to /sbin/mpath_prio_rdac, which I'm using. devices { device { #ds3500 vendor "IBM" product "1746 FAStT" hardware_handler "1 rdac" path_checker rdac failback 0 path_grouping_policy multibus prio_callout "/sbin/mpath_prio_rdac /dev/%n" } } multipaths { multipath { wwid xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx alias array07 path_grouping_policy multibus path_checker readsector0 path_selector "round-robin 0" failback "5" rr_weight priorities no_path_retry "5" } } The output of multipath -ll with controller A as the preferred path: root@db06:~# multipath -ll sdg: checker msg is "directio checker reports path is down" sdh: checker msg is "directio checker reports path is down" array07 (xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx) dm-2 IBM ,1746 FASt [size=4.9T][features=1 queue_if_no_path][hwhandler=0] \_ round-robin 0 [prio=2][active] \_ 5:0:1:0 sdd 8:48 [active][ready] \_ 5:0:2:0 sde 8:64 [active][ready] \_ 6:0:1:0 sdg 8:96 [failed][faulty] \_ 6:0:2:0 sdh 8:112 [failed][faulty] If I change the preferred path using IBM DS Storage Manager to Controller B, the output swaps accordingly: root@db06:~# multipath -ll sdd: checker msg is "directio checker reports path is down" sde: checker msg is "directio checker reports path is down" array07 (xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx) dm-2 IBM ,1746 FASt [size=4.9T][features=1 queue_if_no_path][hwhandler=0] \_ round-robin 0 [prio=2][active] \_ 5:0:1:0 sdd 8:48 [failed][faulty] \_ 5:0:2:0 sde 8:64 [failed][faulty] \_ 6:0:1:0 sdg 8:96 [active][ready] \_ 6:0:2:0 sdh 8:112 [active][ready] According to IBM, the inactive path should be "[active][ghost]", not "[failed][faulty]". Despite this, I don't seem to have any I/O issues, but my syslog is being spammed with this every 5 seconds: Jun 1 15:30:09 db06 multipathd: sdg: directio checker reports path is down Jun 1 15:30:09 db06 kernel: [ 2350.282065] sd 6:0:2:0: [sdh] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jun 1 15:30:09 db06 kernel: [ 2350.282071] sd 6:0:2:0: [sdh] Sense Key : Illegal Request [current] Jun 1 15:30:09 db06 kernel: [ 2350.282076] sd 6:0:2:0: [sdh] <<vendor>> ASC=0x94 ASCQ=0x1ASC=0x94 ASCQ=0x1 Jun 1 15:30:09 db06 kernel: [ 2350.282083] sd 6:0:2:0: [sdh] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 Jun 1 15:30:09 db06 kernel: [ 2350.282092] end_request: I/O error, dev sdh, sector 0 Jun 1 15:30:10 db06 multipathd: sdh: directio checker reports path is down Jun 1 15:30:14 db06 kernel: [ 2355.312270] sd 6:0:1:0: [sdg] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jun 1 15:30:14 db06 kernel: [ 2355.312277] sd 6:0:1:0: [sdg] Sense Key : Illegal Request [current] Jun 1 15:30:14 db06 kernel: [ 2355.312282] sd 6:0:1:0: [sdg] <<vendor>> ASC=0x94 ASCQ=0x1ASC=0x94 ASCQ=0x1 Jun 1 15:30:14 db06 kernel: [ 2355.312290] sd 6:0:1:0: [sdg] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 Jun 1 15:30:14 db06 kernel: [ 2355.312299] end_request: I/O error, dev sdg, sector 0 Does anyone know how I can get the inactive path to show "[active][ghost]" instead of "[failed][faulty]"? I assume that once I can get that right then the spam in my syslog will end as well. One final thing worth mentioning is that the IBM redbook doc targets SLES 11 so I'm assuming there's something a little different under Ubuntu that I just haven't figured out yet. Update: As suggested by Mitch, I've tried removing /etc/multipath.conf, and now the output of multipath -ll looks like this: root@db06:~# multipath -ll sdg: checker msg is "directio checker reports path is down" sdh: checker msg is "directio checker reports path is down" xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxdm-1 IBM ,1746 FASt [size=4.9T][features=0][hwhandler=0] \_ round-robin 0 [prio=1][active] \_ 5:0:2:0 sde 8:64 [active][ready] \_ round-robin 0 [prio=1][enabled] \_ 5:0:1:0 sdd 8:48 [active][ready] \_ round-robin 0 [prio=0][enabled] \_ 6:0:1:0 sdg 8:96 [failed][faulty] \_ round-robin 0 [prio=0][enabled] \_ 6:0:2:0 sdh 8:112 [failed][faulty] So its more or less the same, with the same message in the syslog every 5 minutes as before, but the grouping has changed.

  Read the article

• POP Forums v9 Beta 1 for ASP.NET MVC 3 posted to CodePlex!

  - by Jeff

  As promised, I posted a beta build of my forum app for ASP.NET MVC 3. Get the new goodies here: http://popforums.codeplex.com/releases/view/58228 This is the first beta for the ASP.NET MVC 3 version of POP Forums. It is nearly feature complete, and ready for testing and feedback. For previous release notes, look here, here and here.Check out the live preview: http://preview.popforums.com/ForumsSetup instructions are on the home page of this project. The new hotness in the beta, or what has been done since the last preview: All views converted to use Razor E-mail subscription/notification of new posts New post indicators/mark read buttons Permalinks to posts Jump to newest post (from new post indicators) Recent topics Favorite topics Moderator functions for topics (pin/close/delete, plus move and rename) Search, ported from v8. Not a ton of optimization here, or new unit testing, but the old version worked pretty well User posts (topics the user posted in) Forgot password Vanity items (signatures and avatars) Hide vanity items per user preference Some minor data caching where appropriate A little bit of UI refinement Lots-o-bug fixes Lots-o-unit tests What's next? The plan between now and the next beta is as follows: Continue working through features/tasks, and fix bugs as they're reported Integrate the forum into a real, production site Refine the UI Refactor as much as possible... the code organization is not entirely logical in some places After the second beta, a release candidate will follow, with a real "final" release after that. Subsequent releases should come relatively frequently and without a lot of risk. The trick in building this thing has been that it mostly tossed the previous WebForms version, which was all full of crusties. The time table for this is a little harder to pin down, as day jobs and families will have their effect. Other notes Refactoring will be a priority. As the features of MVC have evolved, so have my desires to use it in a fashion that makes things clear and easy to follow. I don't even know if anyone will ever start mucking around in the code, but on the off chance they do, I'd like what they find to not suck. Other nice-to-haves are builds to target Windows Azure and SQL CE. A nice setup UI would be super too. I think the ASP.NET MVC world has gone long enough without a decent forum.The biggest challenge that I've found is making the forum something that can be dropped in any app. While it does rope its views into an area, areas are mostly just routing details. I haven't thought of a clever way yet to limit dependency injection, for example, to just the forum bits. I mean, everyone should be using Ninject, but how realistic is that? ;)How much time and effort should you spend on POP Forums in its current state? Change is inevitable, but at this point I'm reasonably committed to not changing the database schema. I really think it will stay as-is. All bets are off for the various interfaces throughout the app, but the data should generally resist change. It's not even that different from v8, which was one of the original goals because I didn't want to rewrite SQL or introduce a new ORM or whatever. My point is that if you wanted to build a site around this today, even though it's not entirely functional, I think it's low risk in terms of data loss. I can't vouch for whether or not you know what you're doing.I've been having some chats with people lately about quoting posts, and honestly there has to be something better and straight forward. That continues to be a holy grail of mine, and some day, I hope to find it.Enjoy... it's starting to feel more real every day!

  Read the article

• jQuery Context Menu Plugin and Capturing Right-Click

  - by Ben Griswold

  I was thrilled to find Cory LaViska’s jQuery Context Menu Plugin a few months ago. In very little time, I was able to integrate the context menu with the jQuery Treeview.  I quickly had a really pretty user interface which took full advantage of limited real estate.  And guess what.  As promised, the plugin worked in Chrome, Safari 3, IE 6/7/8, Firefox 2/3 and Opera 9.5.  Everything was perfect and I shipped to the Integration Environment. One thing kept bugging though – right clicks aren’t the standard in a web environment. Sure, when one hovers over the treeview node, the mouse changed from an arrow to a pointer, but without help text most users will certainly left-click rather than right. As I was already doubting the design decision, we did some Mac testing.  The context menu worked in Firefox but not Safari.  Damn.  That’s when I started digging into the Madness of Javascript Mouse Events.  Don’t tell, but it’s complicated.  About as close as one can get to capture the right-click mouse event on all major browsers on Windows and Mac is this: if (event.which == null) /* IE case */ button= (event.button < 2) ? "LEFT" : ((event.button == 4) ? "MIDDLE" : "RIGHT"); else /* All others */ button= (event.which < 2) ? "LEFT" : ((event.which == 2) ? "MIDDLE" : "RIGHT"); Yikes.  The content menu code was simply checking if event.button == 2.  No problem.  Cory offers a jQuery Right Click Plugin which I’m sure works for windows but probably not the Mac either.  (Please note I haven’t verified this.) Anyway, I decided to address my UI design concern and the Safari Mac issue in one swoop.  I decided to make the context menu respond to any mouse click event.  This didn’t take much – especially after seeing how Bill Beckelman updated the library to recognize the left click. First, I added an AnyClick option to the library defaults: // Any click may trigger the dropdown and that's okay // See Javascript Madness: Mouse Events – http: //unixpapa.com/js/mouse.html if (o.anyClick == undefined) o.anyClick = false; And then I trigger the context menu dropdown based on the following conditional: if (evt.button == 2 || o.anyClick) { Nothing tricky about that, right?  Finally, I updated my menu setup to include the AnyClick value, if true: $('.member').contextMenu({ menu: 'memberContextMenu', anyClick: true },             function (action, el, pos) {                 … Now the context menu works in “all” environments if you left, right or even middle click.  Download jQuery Context Menu Plugin for Any Click *Opera 9.5 has an option to allow scripts to detect right-clicks, but it is disabled by default. Furthermore, Opera still doesn’t allow JavaScript to disable the browser’s default context menu which causes a usability conflict.

  Read the article

• Friday Fun: The Search For Wondla

  - by Asian Angel

  The best day of the week is finally here again, so it is time to have some fun while waiting to go home for the weekend. The game we have for you today takes you far into humanity’s future where you journey with Eva Nine in her quest to find other humans. Note: Today’s game comes with a double bonus! First, there is a sequel game that you can move on to once you have completed the first one. Second, there are three wallpapers available in multiple sizes for those who enjoy the characters and artwork presented in the game (see below). The Search For Wondla The object of the game is to find the differences between two similar looking images based on artwork from The Search For Wondla by Tony DiTerlizzi. Are you ready to join Eva Nine in her quest to find other humans in the future? Note: There is a version available for those who would like to play The Search For Wondla on their iPads! The first game has 28 levels of difference finding goodness for you to work through. Each level will list the minimum number of differences that you need to find to progress to the next level. If you need a hint along the way just click on the Shake or Reveal options at the bottom of the game play window. Get a level completed quickly enough and you get bonus points! There will also be differences in the images for individual levels each time you play the game, so have fun! Note: The second game has 12 levels to complete. To give you a good feel for the game we have covered the first six levels here and provided seven clues for each level (you are only required to find a minimum of five). Eva Nine viewing the holographic outdoor projections in the main hub of her living quarters… Eva Nine is in a grumpy mood as Muthr visits her at bedtime… Eva Nine in her secret hideaway visiting old “childhood friends” as she contemplates her recent survival test failure. Eva Nine viewing the entire set of floor plans for the underground sanctuary where she was born and has been growing up. Eva Nine’s escape to the surface as the underground sanctuary is attacked by the bounty hunter creature Besteel. Eva Nine on the surface for the first time in her young life. Will she be successful in her quest? There is only one way to find out! Play The Search For Wondla Part 1 Play The Search For Wondla Part 2 Bonus Content If you have enjoyed this game you can learn more about the book and download the three wallpapers shown here by visiting the link below! Note: The wallpapers come in the following sizes: 1024*768, 1280*800, 1280*1024, 1440*900, iPhone, iPhone4, and iPad (click on the Extras link at the bottom of the page). Visit the Search For Wondla Homepage Do you enjoy playing difference finding games? Then you will definitely want to have a look at another wonderful game that we have covered here: Friday Fun: Isis Latest Features How-To Geek ETC The How-To Geek Guide to Learning Photoshop, Part 8: Filters Get the Complete Android Guide eBook for Only 99 Cents [Update: Expired] Improve Digital Photography by Calibrating Your Monitor The How-To Geek Guide to Learning Photoshop, Part 7: Design and Typography How to Choose What to Back Up on Your Linux Home Server How To Harmonize Your Dual-Boot Setup for Windows and Ubuntu Hang in There Scrat! – Ice Age Wallpaper How Do You Know When You’ve Passed Geek and Headed to Nerd? On The Tip – A Lamborghini Theme for Chrome and Iron What if Wile E. Coyote and the Road Runner were Human? [Video] Peaceful Winter Cabin Wallpaper Store Tabs for Later Viewing in Opera with Tab Vault

  Read the article

• Manage Your WordPress Blog Comments from Your Windows Desktop

  - by Matthew Guay

  Are you never more than a few steps away from your PC and want to keep up with comments on your blog?  Then here’s how you can stay on top of your WordPress comments right from your desktop. Wp-comment-notifier is a small free app for Windows that lets you easily view, approve, reply to, and delete comments from your WordPress blog.  Whether you have a free WordPress.com blog or are running WordPress on your own server, this tool can keep you connected to your comments.  Unfortunately it only lets you manage comments at one blog, so if manage multiple WordPress-powered sites you may find this a downside.  Otherwise, it works great and helps you stay on top of the conversation at your blog. Get notified with wp-comment-notifier Download the wp-comment-notifier (link below) and install as usual. Run it once it’s installed.  Enter your blog address, username, and password when prompted. Wp-comment-notifier will automatically setup your account and download recent comments. Finally, enter your blog’s name, and click Finish. Review Comments with wp-comment-notifier You can now review your comments directly by double-clicking the new WordPress icon in your system tray.  The window has 3 tabs…comments, pending, and spam.  Select a comment to reply, edit, spam, or delete it directly from your desktop. If you select Edit, then you can edit the HTML of the comment (including links) directly from within the notifier. You can approve or permanently delete any spam messages that are caught by your blog’s spam filter. Whenever new comments come in, you’ll see a tray popup letting you know how many comments are waiting to be approved or are in the spam folder.  Click the popup to open the editor. Now, you can directly approve that pending comment without going to your WordPress admin page.  When you’re done, just press Enter on your Keyboard to post the reply. Or, if you want to reply to the comment, click the reply link and enter your comment in the entry box at the bottom. If you ever want to double-check if there’s any new comments, just right-click on the tray icon and select refresh. Finally, you can change the settings from the Configuration link in the tray button or by clicking the gear button on the bottom of the review window.  You can change how often it checks for new comments, not to start the notifier at system startup, and edit your account information. Conclusion Whether you’re managing your personal blog or administer a site with millions of hits per day, staying on top of the conversation is one of the best ways to build and maintain your audience.  With wp-comment-notifier, you can be sure that you’re always in control of your blogs comments.  This app is especially useful if you review all comments before allowing them to be published. Download wp-comment-notifier Similar Articles Productive Geek Tips How-To Geek SoftwareHow-To Geek Software: WordPress Comment Moderation NotifierSave Time Commenting with Pre-Fill Comments Greasemonkey ScriptAdd Social Bookmarking (Digg This!) Links to your Wordpress BlogTools to Help Post Content On Your WordPress Blog TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Error Goblin Explains Windows Error Codes Twelve must-have Google Chrome plugins Cool Looking Skins for Windows Media Player 12 Move the Mouse Pointer With Your Face Movement Using eViacam Boot Windows Faster With Boot Performance Diagnostics Create Ringtones For Your Android Phone With RingDroid

  Read the article

• Backup and Transfer Foobar2000 to a New Computer

  - by Mysticgeek

  If you are a fan of Foobar2000 you undoubtedly have tweaked it to the point where you don’t want to set it all up again on a new machine. Here we look at how to transfer Foobar2000 settings to a new Windows 7 machine. Note: For this article we are transferring Foobar2000 settings from on Windows 7 machine to another over a network running Windows Home Server.  Foobar2000 Foobar2000 is an awesome music player which is highly customizable and we’ve previously covered. Here we take a look at how it’s set up on the current machine. It’s a nothing flashy, but is set up for our needs and includes a lot of components and playlists.   Backup Files Rather than wasting time setting everything up again on a new machine, we can backup the important files and replace them on the new machine. First type or copy the following into the Explorer address bar. %appdata%\foobar2000 Now copy all of the files in the folder and store them on a network drive or some type removable media or device. New Machine Now you can install the latest version of Foobar2000 on your new machine. You can go with a Standard install as we will be replacing our backed up configuration files anyway. When it launches, it will be set with all the defaults…and we want what we had back. Browse to the following on the new machine… %appdata%\foobar2000 Delete all of the files in this directory… Then replace them with the ones we backed up from the other machine. You’ll also want to navigate to C:\Program Files\Foobar2000 and replace the existing Components folder with the backed up one. When you get the screen telling you there is already files of the same name, select Move and Replace, and check the box Do this for the next 6 conflicts. Now we’re back in business! Everything is exactly as it was on the old machine. In this example, we were moving the Foobar2000 files from a computer on the same home network. All the music is coming from a directory on our Windows Home Server so they hadn’t changed. If you’re moving these files to a computer on another machine… say your work computer, you’ll need to adjust where the music folders point to. Windows XP If you’re setting up Foobar2000 on an XP machine, you can enter the following into the Run line. %appdata%\foobar2000 Then copy your backed up files into the Foobar2000 folder, and remember to swap out the Components folder in C:\Program Files\Foobar2000. Confirm to replace the files and folders by clicking Yes to All… Conclusion This method worked perfectly for us on our home network setup. There might be some other things that will need a bit of tweaking, but overall the process is quick and easy. There is a lot of cool things you can do with Foobar2000 like rip an audio CD to FlAC. If you’re a fan of Foobar2000 or considering switching to it, we will be covering more awesome features in future articles. Download Foobar2000 – Windows Only Similar Articles Productive Geek Tips Backup or Transfer Microsoft Office 2007 Quick Parts Between ComputersBackup and Restore Internet Explorer’s Trusted Sites ListSecond Copy 7 [Review]Backup and Restore Firefox Profiles EasilyFoobar2000 is a Fully Customizable Music Player TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 Windows Media Player Glass Icons (icons we like) How to Forecast Weather, without Gadgets Outlook Tools, one stop tweaking for any Outlook version Zoofs, find the most popular tweeted YouTube videos Video preview of new Windows Live Essentials 21 Cursor Packs for XP, Vista & 7

  Read the article

• Understanding Collabnet&rsquo;s LDAP binding

  - by Robert May

  We want to use both subversion usernames and passwords as well as Active Directory for our authentication on our Collabnet subversion server. This has proven to be more of a challenge than we thought, mostly because Collabnet’s documentation is pretty poor. To supplement that documentation, I add my own. The first thing to understand is that the attribute that you specify in the LDAP Login Attribute ONLY applies to lookups done for the user.  It does NOT apply to the LDAP Bind DN field.  Second, know that the debug logs (error is the one you want) don’t give you debug information for the bind DN, just the login attempts.  Third, by default, Active Directory does not allow anonymous binds, so you MUST put in a user that has the authority to query the Active Directory ldap. Because of these items, the values to set in those fields can be somewhat confusing.  You’ll want to have ADSI Edit handy (I also used ldp, which is installed by default on server 2008), since ADSI Edit can help you find stuff in your active directory.  Be careful, you can also break stuff. Here’s what should go into those fields. LDAP Security Level:  Should be set to None LDAP Server Host:  Should be set to the full name of a domain controller in your domain.  For example, dc.mydomain.com LDAP Server Port:  Should be set to 3268.  The default port of 389 will only query that specific server, not the global catalog.  By setting it to 3268, the global catalog will be queried, which is probably what you want. LDAP Base DN:  Should be set to the location where you want the search for users to begin.  By default, the search scope is set to sub, so all child organizational units below this setting will be searched.  In my case, I had created an OU specifically for users for group policies.  My value ended up being:  OU=MyOu,DC=domain,DC=org.   However, if you’re pointing it to the default Users folder, you may end up with something like CN=Users,DC=domain,DC=org (or com or whatever).  Again, use ADSI edit and use the Distinguished Name that it shows. LDAP Bind DN:  This needs to be the Distinguished Name of the user that you’re going to use for binding (i.e. the user you’ll be impersonating) for doing queries.  In my case, it ended up being CN=svn svn,OU=MyOu,DC=domain,DC=org.  Why the double svn, you might ask?  That’s because the first and last name fields are set to svn and by default, the distinguished name is the first and last name fields!  That’s important.  Its NOT the username or account name!  Again, use ADSI edit, browse to the username you want to use, right click and select properties, and then search the attributes for the Distinguished Name.  Once you’ve found that, select it and click View and you can copy and paste that into this field. LDAP Bind Password:  This is the password for the account in the Bind DN LDAP login Attribute: sAMAccountName.  If you leave this blank, uid is used, which may not even be set.  This tells it to use the Account Name field that’s defined under the account tab for users in Active Directory Users and Computers.  Note that this attribute DOES NOT APPLY to the LDAP Bind DN.  You must use the full distinguished name of the bind DN.  This attribute allows users to type their username and password for authentication, rather than typing their distinguished name, which they probably don’t know. LDAP Search Scope:  Probably should stay at sub, but could be different depending on your situation. LDAP Filter:  I left mine blank, but you could provide one to limit what you want to see.  LDP would be helpful for determining what this is. LDAP Server Certificate Verification:  I left it checked, but didn’t try it without it being checked. Hopefully, this will save some others pain when trying to get Collabnet setup. Technorati Tags: Subversion,collabnet

  Read the article

• Silverlight Cream for March 21, 2010 -- #816

  - by Dave Campbell

  In this Issue: Michael Washington, John Papa(-2-, -3-, -4-), Jonas Follesø, David Anson, Scott Guthrie, Andrej Tozon, Bill Reiss(-2-), Pete Blois, and Lee. Shoutouts: Frank LaVigne has a Mix10 Session Downloader for us all to use... thanks Frank! Read what Ward Bell has to say about MVVM, Josh Smith’s Way ... it's all good. Robby Ingebretsen posts on his 10 Favorite Open Source Fonts You Can Embed in WPF or Silverlight Mike Harsh posted Slides and Demos from my MIX10 Session . The download link at Drop.io is down for maintenance until Sunday evening, March 21. From SilverlightCream.com: Blend 4: TreeView SelectedItemChanged using MVVM Michael Washington has a post up about doing SelectedItemChanged on a TreeView with MVVM, oh and he's starting out in Blend 4... Silverlight TV 14: Developing for Windows Phone 7 with Silverlight John Papa hit Silverlight TV pretty hard at the beginning of MIX10. This first one is with Mike Harsh talking about WP7. (Hi Mike ... wondered where you'd run off to!), and you can go to the shoutout section to get Mike's session material from MIX as well. Silverlight TV 15: Announcing Silverlight 4 RC at MIX 10 In this next Silverlight TV(15), John Papa and Adam Kinney discuss Silverlight 4RC ... thank goodness it's out, we can all let go of the breath we've been holding in :) Silverlight TV 16: Tim Heuer and Jesse Liberty Talk about Silverlight 4 RC at MIX 10 Silverlight TV 16 has John Papa sharing the spotlight with Jesse Liberty and Tim Heuer ... geez... can you find 3 more kowledgable Silverlight folks to listen to? No? then go listen to this :) Silverlight TV 17: Build a Twitter Client for Windows Phone 7 with Silverlight The latest Silverlight TV has John Papa bringing Mike Harsh back to produce a Twitter Client for WP7. Simulating multitouch on the Windows Phone 7 Emulator Jonas Follesø has a great post up about simulating multi-touch on WP7 using multiple mice ... yeah, you read that right :) Using IValueConverter to create a grouped list of items simply and flexibly David Anson demonstrates grouping items in a ListBox using IValueConverter. I think I can pretty well guarantee I would NOT have thought of doing this.. :) Building a Windows Phone 7 Twitter Application using Silverlight In the MIX10 first-day keynote, Scott Guthrie did File->New Project and built a WP7 Twitter app. He has that up as a tutorial with all sorts of external links including one to the keynote itself. Named and optional parameters in Silverlight 4 Andrej Tozon delves into the optional parameters that are now available to Silverlight developers... pretty cool stuff. Space Rocks game step 4: Inheriting from Sprite Bill Reiss continues with his game development series with this one on inheriting from the Sprite class and centering objects Space Rocks game step 5: Rotating the ship Bill Reiss's episode 5 is on rotating the ship you setup in episode 4. Don't worry about the transforms, Bill gives it all to us :) Labyrinth Sample for Windows Phone Wow... check out the sample Pete Blois did for the Phone... Silverlight coolness :) PathListBox in SL4 – firstlook Lee has a post up on the PathListBox. I think this is going to catch on quick... it's just too cool not to! Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• Upgrade Office 2003 to 2010 on XP or Run them Side by Side

  - by Mysticgeek

  If you’re still running XP, currently have Office 2003 installed on your machine, and skipped Office 2007, you might want to upgrade to Office 2010. In this guide we will show you the upgrade process or how to run them side by side. In this example we are upgrading from Office 2003 Standard to Office Professional Plus 2010 RTM (Final) on XP Professional. System Requirements To run Office 2010 on your XP machine you have to make sure you have Service Pack 3 and Microsoft Silverlight installed (links below). Or you can just install them through Windows Update. Recommended Hardware 1GHZ CPU or higher 512 MB of RAM or higher 1024×768 Resolution or higher DirectX 9.0c compatible graphics card with 64 MB of memory or higher Installing Office 2010 Simply kick off the Office Professional Plus 2010 installation. Enter in your product key… Agree to the EULA…   Select the Customize button… Setup will detect Office 2003 and allow you to remove all applications, keep them, or select only the ones you want to keep. In this example we’re going to remove Excel and PowerPoint, and keep Outlook and Word 2003. Next, click the Installation Options tab and select Office programs you want to install. Since we’re keeping Outlook 2003 and don’t want to use Outlook 2010, we’re making sure not to install Outlook 2010. However, we want to run Word 2003 and 2010 on the same machine. After you’ve made your selections click the Upgrade button. The installation begins and you’re shown the progress. The amount of time it takes to install will vary between systems. Installation is complete and you can close out of the installer. Now when you go into the Start menu under Microsoft Office, you’ll see both versions of the Office apps available. Here is a shot of Word 2003 and 2010 running together on our XP machine.   Conclusion If you’re moving from Office 2003 to 2010, this allows you to install both versions side by side. It gives you a chance to learn 2010 features, and still work in the familiar 2003 environment when you need to get things done quickly. If you’re having problems installing Office 2010 make sure to check out our article on how to fix problems upgrading Office 2010 beta to RTM (Final) release. Also, if you were using Office 2007 and are currently using the 2010 beta, we have a guide on how to switch back to Office 2007 after the 2010 beta ends. Links XP Service Pack 3 Microsoft Silverlight Details on Office 2010 System Requirements Similar Articles Productive Geek Tips Add Word/Excel 97-2003 Documents Back to the "New" Context Menu After Installing Office 2007Make Word 2007 Always Save in Word 2003 FormatMake Excel 2007 Always Save in Excel 2003 FormatRemove Office 2010 Beta and Reinstall Office 2007How to Find Office 2003 Commands in Office 2010 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Enable or Disable the Task Manager Using TaskMgrED Explorer++ is a Worthy Windows Explorer Alternative Error Goblin Explains Windows Error Codes Twelve must-have Google Chrome plugins Cool Looking Skins for Windows Media Player 12 Move the Mouse Pointer With Your Face Movement Using eViacam

  Read the article

• Using NServiceBus behind a custom web service

  - by Michael Stephenson

  In this post I'd like to talk about an architecture scenario we had recently and how we were able to utilise NServiceBus to help us address this problem. Scenario Cognos is a reporting system used by one of my clients. A while back we developed a web service façade to allow line of business applications to be able to access reports from Cognos to support their various functions. The service was intended to provide access to reports which were quick running reports or pre-generated reports which could be accessed real-time on demand. One of the key aims of the web service was to provide a simple generic interface to allow applications to get any report without needing to worry about the complex .net SDK for Cognos. The web service also supported multi-hop kerberos delegation so that report data could be accesses under the context of the end user. This service was working well for a period of time. The Problem The problem we encountered was that reports were now also required to be available to batch processes. The original design was optimised for low latency so users would enjoy a positive experience, however when the batch processes started to request 250+ concurrent reports over an extended period of time you can begin to imagine the sorts of problems that come into play. The key problems this new scenario caused are: Users may be affected and the latency of on demand reports was significantly slower The Cognos infrastructure was not scaled sufficiently to be able to cope with these long peaks of load From a cost perspective it just isn't feasible to scale the Cognos infrastructure to be able to handle the load when it is only for a couple of hour window each night. We really needed to introduce a second pattern for accessing this service which would support high through-put scenarios. We also had little control over the batch process in terms of being able to throttle its load. We could however make some changes to the way it accessed the reports. The Approach My idea was to introduce a throttling mechanism between the Web Service Façade and Cognos. This would allow the batch processes to push reports requests hard at the web service which we were confident the web service can handle. The web service would then queue these requests and process them behind the scenes and make a call back to the batch application to provide the report once it had been accessed. In terms of technology we had some limitations because we were not able to use WCF or IIS7 where the MSMQ-Activated WCF services could have helped, but we did have MSMQ as an option and I thought NServiceBus could do just the job to help us here. The flow of how this would work was as follows: The batch applications would send a request for a report to the web service The web service uses NServiceBus to send the message to a Queue The NServiceBus Generic Host is running as a windows service with a message handler which subscribes to these messages The message handler gets the message, accesses the report from Cognos The message handler calls back to the original batch application, this is decoupled because the calling application provides a call back url The report gets into the batch application and is processed as normal This approach looks something like the below diagram: The key points are an application wanting to take advantage of the batch driven reports needs to do the following: Implement our call back contract Make a call to the service providing a call back url Provide a correlation ID so it knows how to tie each response back to its request What does NServiceBus offer in this solution So this scenario is not the typical messaging service bus type of solution people implement with NServiceBus, but it did offer the following: Simplified interaction with MSMQ Offered the ability to configure the number of processes working through the queue so we could find a balance between load on Cognos versus the applications end to end processing time NServiceBus offers retries and a way to manage failed messages NServiceBus offers a high availability setup The simple thing is that NServiceBus gave us the platform to build the solution on. We just implemented a message handler which functionally processed a message and we could rely on NServiceBus to do all of the hard work around managing the queues and all of the lower level things that would have took ages to write to any kind of robust level. Conclusion With this approach we were able to deal with a fairly significant performance issue with out too much rework. Hopefully this write up gives people some insight into ideas on how to leverage the excellent NServiceBus framework to help solve integration and high through-put scenarios.

  Read the article

• The Next Wave of PeopleSoft Capabilities for the Staffing Industry Is Here

  - by Mark Rosenberg

  With the release of PeopleSoft Financials and Supply Chain Management 9.1 Feature Pack 2 in January this year, we introduced substantial new capabilities for our Staffing Industry customers. Through a co-development project with Infosys Limited, we have enriched Oracle's PeopleSoft Staffing Solution with new tools aimed at accelerating and improving the quality of job order fulfillment, increasing branch recruiter productivity, and driving profitable growth. Staffing industry firms succeed based on their ability to rapidly, cost-effectively, and continually fill their pipelines with new clients and job orders, recruit the best talent, and match orders with talent. Pressure to execute in each of these functional areas is even more acute on staffing firms as contingent labor becomes a more substantial and permanent part of the workforce mix. In an industry that creates value through speedy execution, there is little room for manual, inefficient processes and brittle, custom integrations, which throttle profitability and growth. The latest wave of investment in the PeopleSoft Staffing Solution focuses on generating efficiency and flexibility for our customers. Simplicity To operate profitably and continue growing, a Staffing enterprise needs its client management, recruiting, order fulfillment, and other processes to function in harmony. Most importantly, they need to be simple for recruiters, branch managers, and applicants to access and understand. The latest PeopleSoft Staffing Solution set of enhancements includes numerous automated defaulting mechanisms and information-rich dashboard pagelets that even a new employee can learn quickly. Pending Applicant, Agenda management, Search, and other pagelets are just a few of the newest, easy-to-use tools that not only aggregate and summarize information, but also provide instant access to applicants, tasks, and key reports for branch staff. Productivity The leading firms in the Staffing industry are those that can more efficiently orchestrate large numbers of candidates, clients, and orders than their competitors can. PeopleSoft Financials and Supply Chain Management 9.1 Feature Pack 2 delivers productivity boosters that Staffing firms can leverage to streamline tasks and processes for competitive advantage. For example, we enhanced the Recruiting Funnel, which manages the candidate on-boarding process, with a highly interactive user interface. It integrates disparate Staffing business processes and exploits new PeopleTools technologies to offer a superior on-boarding user experience. Automated creation of agenda items and assignment tasks for each candidate minimizes setup and organizes assignment steps for the on-boarding process. Mass updates of tasks and instant access to the candidate overview page (which we also expanded), candidate event status, event counts, and other key data enable recruiters to better serve clients and candidates. Lower TCO Constructing and maintaining an efficient yet flexible labor supply chain can be complicated, let alone expensive. Traditionally, Staffing firms have been challenged in controlling their technology cost of ownership because connecting candidate and client-facing tools involved building and integrating custom applications and technologies and managing staff turnover, placing heavy demands on IT and support staff. With PeopleSoft Financials and Supply Chain Management 9.1 Feature Pack 2, there are two major enhancements that aggressively tackle these challenges. First, we added another integration framework to enable cost-effective linking of the Staffing firm’s PeopleSoft applications and its job board distributors. (The first PeopleSoft 9.1 Feature Pack released in March 2011 delivered an integration framework to connect to resume parsing providers.) Second, we introduced the teaming concept to enable work to be partitioned to groups, as well as individuals. These two capabilities, combined with a host of others, position Staffing firms to configure and grow their businesses without growing their IT and overhead expenditures. For our Staffing Industry customers, PeopleSoft Financials and Supply Chain Management 9.1 Feature Pack 2 is loaded with high-value tools aimed at enabling and sustaining a flexible labor supply chain. For more information, contact [email protected] or [email protected].

  Read the article

• SWFObject and IE6 causing hair-pulling agony

  - by Piet

  I recently used SWFObject to display a flash header on a website. I chose SWFObject because: Instead of displaying an annoying ‘Install flash now’ message, it claims to be able to show alternate content. In this case: the original header image. It claims to be compatible with more or less every browser out there. Implementation went fine, until someone tested it on IE6 and got the following error: Internet explorer cannot open the Internet site http://www….. Operation aborted Which basically means that the site just can’t be visited with IE6 (still used a lot in business environments), it even seems as if there’s something wrong with your internet connection. Now, since about 10% of visitors to this site are still using IE6 (why does everyone still use Internet Explorer ???? Do YOU know that these days most people do NOT use Internet Explorer anymore ?) Now after some googling, I found the suggestion to defer loading of the SWFObject.js as follows: <script type="text/javascript" defer=”defer” src=”http://ajax.googleapis.com/ajax/libs/swfobject/2.2/swfobject.js” </script> <script type=”text/javascript” defer=”defer” swfobject.registerObject(”myId”, “9″, “”); </script> What this does according to W3C: When set, this boolean attribute provides a hint to the user agent that the script is not going to generate any document content (e.g., no “document.write” in javascript) and thus, the user agent can continue parsing and rendering. I don’t know exactly why, but: HURRAY! It works now!!! Only… IE6 and IE7 (didn’t try IE8) now gave the following error: Line: 19 Char: 1 Error: ’swfobject’ is undefined Code: 0 URL: http://www… But the flash was still running fine. Still, such an error isn’t clean, especially since almost half of the site’s visitors are using one of these Internet Explorer versions. Now, wanting a quick fix I decided to do the following: <script type="text/javascript" defer="defer" if (typeof(swfobject) != "undefined") swfobject.registerObject("myId", "9", ""); </script> I admit this is a bit of a weird ‘fix’. You’d suspect the flash to stop working on IE6/IE7, which it doesn’t. Not planning on diving into it’s inner bowels, I regard this a ‘mission accomplished’ until someone somewhere posts a better solution (for which I setup some Google alerts). Do you have a better solution? What would be the impact on the webdev economy (or your life) if all browsers were compatible? Addendum Because the above turned out not to work with the new Firefox 3.5.3 (strangely, was OK with 3.5.2 when I tested it) I decided to cut the crap and use the ‘Dynamic Publishing’ way. Ok, so it won’t work for people who have javascript disabled, but who on earth would have flash installed AND javascript disabled? To avoid the IE6 error with the ‘Dynamic Publishing’ way, I call swfobject.embedSWF right after the div that will be replaced with the flash content. Calling swfobject.embedSWF in the <head> would otherwise give me the above error in IE6 again.

  Read the article

• SQL SERVER – Puzzle – Statistics are not Updated but are Created Once

  - by pinaldave

  After having excellent response to my quiz – Why SELECT * throws an error but SELECT COUNT(*) does not?I have decided to ask another puzzling question to all of you. I am running this test on SQL Server 2008 R2. Here is the quick scenario about my setup. Create Table Insert 1000 Records Check the Statistics Now insert 10 times more 10,000 indexes Check the Statistics – it will be NOT updated Note: Auto Update Statistics and Auto Create Statistics for database is TRUE Expected Result – Statistics should be updated – SQL SERVER – When are Statistics Updated – What triggers Statistics to Update Now the question is why the statistics are not updated? The common answer is – we can update the statistics ourselves using UPDATE STATISTICS TableName WITH FULLSCAN, ALL However, the solution I am looking is where statistics should be updated automatically based on algorithm mentioned here. Now the solution is to ____________________. Vinod Kumar is not allowed to take participate over here as he is the one who has helped me to build this puzzle. I will publish the solution on next week. Please leave a comment and if your comment consist valid answer, I will publish with due credit. Here is the script to reproduce the scenario which I mentioned. -- Execution Plans Difference -- Create Sample Database CREATE DATABASE SampleDB GO USE SampleDB GO -- Create Table CREATE TABLE ExecTable (ID INT, FirstName VARCHAR(100), LastName VARCHAR(100), City VARCHAR(100)) GO -- Insert One Thousand Records -- INSERT 1 INSERT INTO ExecTable (ID,FirstName,LastName,City) SELECT TOP 1000 ROW_NUMBER() OVER (ORDER BY a.name) RowID, 'Bob', CASE WHEN  ROW_NUMBER() OVER (ORDER BY a.name)%2 = 1 THEN 'Smith' ELSE 'Brown' END, CASE WHEN ROW_NUMBER() OVER (ORDER BY a.name)%20 = 1 THEN 'New York' WHEN  ROW_NUMBER() OVER (ORDER BY a.name)%20 = 5 THEN 'San Marino' WHEN  ROW_NUMBER() OVER (ORDER BY a.name)%20 = 3 THEN 'Los Angeles' WHEN  ROW_NUMBER() OVER (ORDER BY a.name)%20 = 7 THEN 'La Cinega' WHEN  ROW_NUMBER() OVER (ORDER BY a.name)%20 = 13 THEN 'San Diego' WHEN  ROW_NUMBER() OVER (ORDER BY a.name)%20 = 17 THEN 'Las Vegas' ELSE 'Houston' END FROM sys.all_objects a CROSS JOIN sys.all_objects b GO -- Display statistics of the table - none listed sp_helpstats N'ExecTable', 'ALL' GO -- Select Statement SELECT FirstName, LastName, City FROM ExecTable WHERE City  = 'New York' GO -- Display statistics of the table sp_helpstats N'ExecTable', 'ALL' GO -- Replace your Statistics over here -- NOTE: Replace your _WA_Sys with stats from above query DBCC SHOW_STATISTICS('ExecTable', _WA_Sys_00000004_7D78A4E7); GO -------------------------------------------------------------- -- Round 2 -- Insert Ten Thousand Records -- INSERT 2 INSERT INTO ExecTable (ID,FirstName,LastName,City) SELECT TOP 10000 ROW_NUMBER() OVER (ORDER BY a.name) RowID, 'Bob', CASE WHEN  ROW_NUMBER() OVER (ORDER BY a.name)%2 = 1 THEN 'Smith' ELSE 'Brown' END, CASE WHEN ROW_NUMBER() OVER (ORDER BY a.name)%20 = 1 THEN 'New York' WHEN  ROW_NUMBER() OVER (ORDER BY a.name)%20 = 5 THEN 'San Marino' WHEN  ROW_NUMBER() OVER (ORDER BY a.name)%20 = 3 THEN 'Los Angeles' WHEN  ROW_NUMBER() OVER (ORDER BY a.name)%20 = 7 THEN 'La Cinega' WHEN  ROW_NUMBER() OVER (ORDER BY a.name)%20 = 13 THEN 'San Diego' WHEN  ROW_NUMBER() OVER (ORDER BY a.name)%20 = 17 THEN 'Las Vegas' ELSE 'Houston' END FROM sys.all_objects a CROSS JOIN sys.all_objects b GO -- Select Statement SELECT FirstName, LastName, City FROM ExecTable WHERE City  = 'New York' GO -- Display statistics of the table sp_helpstats N'ExecTable', 'ALL' GO -- Replace your Statistics over here -- NOTE: Replace your _WA_Sys with stats from above query DBCC SHOW_STATISTICS('ExecTable', _WA_Sys_00000004_7D78A4E7); GO -- You will notice that Statistics are still updated with 1000 rows -- Clean up Database DROP TABLE ExecTable GO USE MASTER GO ALTER DATABASE SampleDB SET SINGLE_USER WITH ROLLBACK IMMEDIATE; GO DROP DATABASE SampleDB GO Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Index, SQL Performance, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: SQL Statistics, Statistics

  Read the article

• Beginner Geek: Scan a Document or Picture in Windows 7

  - by Mysticgeek

  There may come a time when you want to digitize your priceless old pictures, or need to scan a receipts and documents for your company. Today we look at how to scan a picture or document in Windows 7. Scanning Your Document In this example we’re using an HP PSC 1500 All-In-One printer connected to a Windows 7 Home Premium 32-bit system. Different scanners will vary, however the process is essentially the same. The scanning process has changed a bit since the XP days. To scan a document in Windows 7, place the document or picture in the scanner, click on Start, and go to Devices and Printers.   When the Devices and Printers window opens, find your scanning device and double-click on it to get the manufacturers Printer Actions menu. For our HP PSC 1500 we have a few different options like printing, device setup, and scanner actions. Here we’ll click on the Scan a document or photo hyperlink. The New Scan window opens and from here you can adjust the quality of the scanned image and choose the output file type. Then click the Preview button to get an idea of what the image will look like.   If you’re not happy with the preview, then you can go back and make any adjustments to the quality of the document or photo. Once everything looks good, click on the Scan button. The scanning process will start. The amount of time it takes will depend on your scanner type, and the quality of the settings you choose. The higher the quality…the more time it will take. You will have the option to tag the picture if you want to… Now you can view your scanned document or photo inside Windows Photo Viewer. If you’re happy with the look of the document, you can send it off in an email, put it on an network drive, FTP it… whatever you need to do with it. Another method is to place the document of photo you wish to scan in the scanner, open up Devices and Printers, then right-click on the scanning device and select Start Scan from the context menu. This should bypass the manufacturer screen and go directly into the New Scan window, where you can start the scan process. From the Context Menu you can also choose Scan Properties. This will allow you to test the scanner if you’re having problems with it and change some of its settings. Or you can choose Scan Profiles which allows you to use pre-selected settings, create your own, or set one as the default. Although scanning documents and photos isn’t a common occurrence as it was a few years ago, Windows 7 still includes the feature. When you need to scan a document or photo in Windows 7, this should get you started. Similar Articles Productive Geek Tips Easily Rotate Pictures In Word 2007Beginner Geek: Delete User Accounts in Windows 7Customize Your Welcome Picture Choices in Windows VistaSecure Computing: Detect and Eliminate Malware Using Windows DefenderMark Your Document As Final in Word 2007 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Creating a Password Reset Disk in Windows Bypass Waiting Time On Customer Service Calls With Lucyphone MELTUP – "The Beginning Of US Currency Crisis And Hyperinflation" Enable or Disable the Task Manager Using TaskMgrED Explorer++ is a Worthy Windows Explorer Alternative Error Goblin Explains Windows Error Codes

  Read the article

• Auto-cancel reason not found (6, 13906)

  - by Rajesh Sharma

  There are many errors in the application which are never invoked because of appropriate application configuration done at the time of implementation by the solution architects. So typically, as an application end user you would never stumble upon such errors. But what if the application administrator inadvertently changes the configuration/setup in the development, test, QA, or production environment? This is the time when you as an end user are introduced to a brand-new error for which you may not have a clue or understanding to what it means and neither the access/privilege to rectify it.    In this post we'll focus on one such error '6, 13906 - Auto-cancel reason not found'.   You get this error if you have not defined a Bill (Segment) Cancel Reason (Admin Menu, B, Bill Cancel Reason) code with System Default value of Turn off auto-cancel.   Consider a scenario when you are about to final bill an 'Account' for which the bill period's cut-off date you selected is falling on or after the Service Agreement's (SA) end/stop date (basically SA is Stopped with a date earlier than it was billed previously). And for the same 'Account' either: Bill segments exists that end after the SA's end date OR Non-closing bill segments exists that end on the SA's end date (OR closing bill segments that do not end on SA's end date or do not exist at all - remember closing/final bill segment is generated if the SA is in Stopped status).   CC&B detects such scenario and attempts to cancel all such violating bill segments automatically, but NOT if you are generating the bill Online. If online, the system assumes that you know what you are doing, and prompts you with error 2, 13716 - Bill segments that violate the SA (%1) End Date (%2) exist to take necessary action.   If in batch, system automatically cancels these kinds of bill segment(s).   Since this happens in the background, you have to define within the application which System Default Bill (Segment) cancellation reason code identified as Turn off auto-cancel, should be used by the process when it attempts to cancel any such violating bill segments (You already know that you cannot cancel a bill segment without giving a reason for cancellation).   So what exactly happens during batch billing?   Bill Segment generation routine at first determines billing eligibility of the service agreement being billed. One of the billing eligibility criteria is to check the SA's previous bill segments which have end dates greater than the current cut-off date/end date. Technically, the routine retrieves a count of such violating bill segments.     SELECT COUNT (*) FROM CI_BSEG WHERE SA_ID = :SA-ID AND BSEG_STAT_FLG = '50' -- Frozen AND END_DT IS NOT NULL AND (END_DT > '03-JUN-2010' -- Bill segment greater than SA's End Date OR OR (END_DT = '03-JUN-2010' AND CLOSING_BSEG_SW = 'N')) -- Non-closing bill segment ending on SA's end date   If the count is greater than zero, Bill segment generation routine executes another program to auto-cancel such bill segments. Auto-cancel program retrieves the 'Bill Cancel Reason' code which is identified as Turn off auto-cancel. Retrieved cancel reason code is then placed on the bill segments that are being cancelled automatically.   During this process if the routine fails to determine the bill cancel reason code having System Default Turn off auto-cancel because it was not been configured, you get a bill exception 6, 13906 - Auto-cancel reason not found.   Also note that duplicate or multiple System Default codes identified as Turn off auto-cancel are not allowed. CC&B would complain with an error 2, 54201.   Duplicate validation/check is also performed within Auto-cancel routine, if suppose for test purposes you executed a DML statement updating CI_BILL_CAN_RSN.BSCAN_SYS_DFLT_FLG with a value 'T'.

  Read the article

• Routes for IIS Classic and Integrated Mode

  - by imran_ku07

       Introduction:             ASP.NET MVC Routing feature makes it very easy to provide clean URLs. You just need to configure routes in global.asax file to create an application with clean URLs. In most cases you define routes works in IIS 6, IIS 7 (or IIS 7.5) Classic and Integrated mode. But in some cases your routes may only works in IIS 7 Integrated mode, like in the case of using extension less URLs in IIS 6 without a wildcard extension map. So in this article I will show you how to create different routes which works in IIS 6 and IIS 7 Classic and Integrated mode.       Description:             Let's say that you need to create an application which must work both in Classic and Integrated mode. Also you have no control to setup a wildcard extension map in IIS. So you need to create two routes. One with extension less URL for Integrated mode and one with a URL with an extension for Classic Mode.   routes.MapRoute( "DefaultClassic", // Route name "{controller}.aspx/{action}/{id}", // URL with parameters new { controller = "Home", action = "Index", id = UrlParameter.Optional } // Parameter defaults ); routes.MapRoute( "DefaultIntegrated", // Route name "{controller}/{action}/{id}", // URL with parameters new { controller = "Home", action = "Index", id = UrlParameter.Optional } // Parameter defaults );               Now you have set up two routes, one for Integrated mode and one for Classic mode. Now you only need to ensure that Integrated mode route should only match if the application is running in Integrated mode and Classic mode route should only match if the application is running in Classic mode. For making this work you need to create two custom constraint for Integrated and Classic mode. So replace the above routes with these routes,     routes.MapRoute( "DefaultClassic", // Route name "{controller}.aspx/{action}/{id}", // URL with parameters new { controller = "Home", action = "Index", id = UrlParameter.Optional }, // Parameter defaults new { mode = new ClassicModeConstraint() }// Constraints ); routes.MapRoute( "DefaultIntegrated", // Route name "{controller}/{action}/{id}", // URL with parameters new { controller = "Home", action = "Index", id = UrlParameter.Optional }, // Parameter defaults new { mode = new IntegratedModeConstraint() }// Constraints );            The first route which is for Classic mode adds a ClassicModeConstraint and second route which is for Integrated mode adds a IntegratedModeConstraint. Next you need to add the implementation of these constraint classes.     public class ClassicModeConstraint : IRouteConstraint { public bool Match(HttpContextBase httpContext, Route route, string parameterName, RouteValueDictionary values, RouteDirection routeDirection) { return !HttpRuntime.UsingIntegratedPipeline; } } public class IntegratedModeConstraint : IRouteConstraint { public bool Match(HttpContextBase httpContext, Route route, string parameterName, RouteValueDictionary values, RouteDirection routeDirection) { return HttpRuntime.UsingIntegratedPipeline; } }             HttpRuntime.UsingIntegratedPipeline returns true if the application is running on Integrated mode; otherwise, it returns false. So routes for Integrated mode only matched when the application is running on Integrated mode and routes for Classic mode only matched when the application is not running on Integrated mode.       Summary:             During developing applications, sometimes developers are not sure that whether this application will be host on IIS 6 or IIS 7 (or IIS 7.5) Integrated mode or Classic mode. So it's a good idea to create separate routes for both Classic and Integrated mode so that your application will use extension less URLs where possible and use URLs with an extension where it is not possible to use extension less URLs. In this article I showed you how to create separate routes for IIS Integrated and Classic mode. Hope you will enjoy this article too.   SyntaxHighlighter.all()

  Read the article

• Watch Netflix Instant Movies in Boxee

  - by DigitalGeekery

  Boxee is multi-platform Media PC application with a host of media applications. One of which is the popular Movie service, Netflix. Today we’ll show you how to get setup to watch Netflix Instant streaming video in Boxee. Note: Nexflix requires Microsoft Silverlight which unfortunately means Boxee users running Linux out of luck. What You’ll Need A Netflix account Authorize your Netflix account with Boxee Install Microsoft Silverlight Authorize Your Netflix Account First, we need to authorize our Netflix account with Boxee. (See link below). Type in your Boxee username and password and click “Login.”  When prompted, click “Authorize.”   Click “Yes, Link This Account.”    Install Silverlight If you don’t already have Silverlight installed, you’ll need to do so. See the download link at the end of the article.   Log into Boxee Now we’re ready to log into Boxee. Once logged in, click on “Apps” on the Home screen.   From the My Apps screen click on Netflix. Then click “Start.” Click “Yes” to enable the cookie.   Now you’ll enter the Netflix App. From here, you can browse your Instant Queue, Recommendations, New Arrivals, Browse Genre, or Search for available titles.   Click on a selection you’d like to watch. From here, you can Play, Rate, or even add the title to your regular Netflix Queue.   With a remote or the on-screen controls you can pause, stop, play, and skip forward or back through the video.   Now you’re all set to enjoy the Netflix Instant library with Boxee. Netflix Instant is one of many great Apps included with Boxee. While the current available selection isn’t exactly overwhelming, most subscribers will likely find enough to keep themselves entertained in between DVD deliveries. Haven’t tried Boxee yet? Check out our article on getting started with Boxee. Links Authorize your Netflix account with Boxee Install Microsoft Silverlight Similar Articles Productive Geek Tips Using Netflix Watchnow in Windows Vista Media Center (Gmedia)Find Movies and TV Based on your Mood with JinniGetting Started with BoxeeQuickly Find Movies to Watch at Hello MoviesIntegrate Boxee with Media Center in Windows 7 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Change DNS servers on the fly with DNS Jumper Live PDF Searches PDF Files and Ebooks Converting Mp4 to Mp3 Easily Use Quick Translator to Translate Text in 50 Languages (Firefox) Get Better Windows Search With UltraSearch Scan News With NY Times Article Skimmer

  Read the article

• Installing SharePoint 2010 in one machine with built in database

  - by sreejukg

  It is very easy to deploy SharePoint 2010 in a single server using the built-in database. Normally one need to choose such installation for evaluation purposes. When installing with default settings, setup installs Microsoft SQL server 2008 express database along with SharePoint. After installing SharePoint, you need to run SharePoint products and technology configuration wizard which will install central admin website and creates the configuration database and content database for SharePoint sites. Limitations 1. You can not perform this installation on a domain controller 2. The maximum size for express edition database is 4 GB SharePoint 2010 only supports 64 bit operating systems. The installation steps are for windows server r2 64 bit enterprise edition. Installation steps The first screen for the installation is as follows As a first step you need to install the s/w prerequisites. Click on the corresponding link Click next, here you have to agree on the license terms. Select the checkbox and then click next. The installation will starts. The progress will be updated in the screen. This may take some time as during this process, there are some components needs to be downloaded from internet. Make sure you are connected to the internet, then only the installation will become a success. If any error occurs, it will display the error, you need to configure in order to continue. If everything ok you will receive the following success page. Click finish to exit the installation window. Now from the first screen, select Install SharePoint server. This will install SharePoint and SQL server 2008 express edition. First you need to enter the product key for SharePoint. Enter the product key and clicks continue. Now you need to accept the license agreement. Select the checkbox and click on continue. Select the installation type you want.   Now click on the standalone button. In production scenario, you need to select the server farm installation. This article only cover the first option, installing server farm is not in the scope of this article. Once you click on the standalone, the installation starts and you can view the progress as below. If any error occurred during installation, you will get the details and link to the log file. Refer log file and fix the corresponding issue and then start the installation again. If installation completes without any error, you will see the below screen. Make sure you selected the check box “Run the SharePoint products Configuration Wizard now” and click close. The SharePoint products configuration wizard starts. Click next; you will get the following warning Click yes and the configuration steps starts. You can view the progress for each step. Once completed the below screen appears to the user. Click finish to complete the installation. Now SharePoint installation is completed. You can navigate to SharePoint central administration website from the administrative tools and start building your portal. Good luck

  Read the article

• Boost Netbook Speed with an SD Card & ReadyBoost

  - by Matthew Guay

  Looking for a way to increase the performance of your netbook?  Here’s how you can use a standard SD memory card or a USB flash drive to boost performance with ReadyBoost. Most netbooks ship with 1Gb of Ram, and many older netbooks shipped with even less.  Even if you want to add more ram, often they can only be upgraded to a max of 2GB.  With ReadyBoost in Windows 7, it’s easy to boost your system’s performance with flash memory.  If your netbook has an SD card slot, you can insert a memory card into it and just leave it there to always boost your netbook’s memory; otherwise, you can use a standard USB flash drive the same way. Also, you can use ReadyBoost on any desktop or laptop; ones with limited memory will see the most performance increase from using it. Please Note:  ReadyBoost requires at least 256Mb of free space on your flash drive, and also requires minimum read/write speeds.  Most modern memory cards or flash drives meet these requirements, but be aware that an old card may not work with it. Using ReadyBoost Insert an SD card into your card reader, or connect a USB flash drive to a USB port on your computer.  Windows will automatically see if your flash memory is ReadyBoost capable, and if so, you can directly choose to speed up your computer with ReadyBoost. The ReadyBoost settings dialog will open when you select this.  Choose “Use this device” and choose how much space you want ReadyBoost to use. Click Ok, and Windows will setup ReadyBoost and start using it to speed up your computer.  It will automatically use ReadyBoost whenever the card is connected to the computer. When you view your SD card or flash drive in Explorer, you will notice a ReadyBoost file the size you chose before.  This will be deleted when you eject your card or flash drive. If you need to remove your drive to use elsewhere, simply eject as normal. Windows will inform you that the drive is currently being used.  Make sure you have closed any programs or files you had open from the drive, and then press Continue to stop ReadyBoost and eject your drive. If you remove the drive without ejecting it, the ReadyBoost file may still remain on the drive.  You can delete this to save space on the drive, and the cache will be recreated when you use ReadyBoost next time. Conclusion Although ReadyBoost may not make your netbook feel like a Core i7 laptop with 6GB of RAM, it will still help performance and make multitasking even easier.  Also, if you have, say, a memory stick and a flash drive, you can use both of them with ReadyBoost for the maximum benefit.  We have even noticed better battery life when multitasking with ReadyBoost, as it lets you use your hard drive less.  SD cards and thumb drives are relatively cheap today, and many of us have several already, so this is a great way to improve netbook performance cheaply. Similar Articles Productive Geek Tips Speed up Your Windows Vista Computer with ReadyBoostSet the Speed Dial as the Opera Startup PageAsk the Readers: What are Your Computer’s Hardware Specs?Understanding Windows Vista Aero Glass RequirementsReplace Google Chrome’s New Tab Page with Speed Dial TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Recycle ! Find That Elusive Icon with FindIcons Looking for Good Windows Media Player 12 Plug-ins? Find Out the Celebrity You Resemble With FaceDouble Whoa ! Use Printflush to Solve Printing Problems

  Read the article

• Add Social Elements to Your Gmail Contacts with Rapportive

  - by Matthew Guay

  Would you like to discover more about your contacts?  Xobni is a great tool for this in Outlook, and thanks to a small plugin for Gmail, you can get similar functionality right from your favorite webmail app. Setup Rapportive on Your Gmail Browse to the Rapportive site (link below), and click install to add it to your browser.  Rapportive currently only supports Firefox and Google Chrome.  In this test, we installed it on Google Chrome.  Notice that Chrome warns Rapportive may access your private data from Gmail, though Rapportive says that they only use this data securely on your computer or their servers. Next time you log into Gmail, open a message to see the new Rapportive sidebar.  Click Log in to get started. Choose if you want to let Rapportive to access your data. Finally, choose whether to stay logged into Rapportive or to log out when you log out of Gmail.   Using Rapportive Now, when you open an email, you should see more information about your contact on the right side of the message where you usually see Google AdSense ads. You may see an avatar, short bio, and links to their social networks.  You can add notes about a contact also, which lets you use Rapportive as a CRM. You may see more information on some contacts.  Here we see a contact that shows recent Tweets and links to several social networks. Take Rapportive Further You can add more features to Rapportive with Raplets, which are small extensions that add more information or CRM functionality.  To add these, click the Rapportive button on the top of Gmail, and select Add Raplets to Rapportive. Find a Raplet you want, and click Add This. A popup will open to give you more information about the Raplet; click the Add button at the bottom if you still want it. And, if you’re wish to close Rapportive without logging out of Gmail, click the Rapportive link in Gmail and select Log out. Conclusion Whether you want to find out more about your contacts or keep track of notes about them, Rapportive is a great way to do this from Gmail.  With tools like this, Gmail gets a bit more powerful and feels more like a desktop application. If you would like this type of functionality in Outlook, check out our article on how to power up Outlook’s search and contacts with Xobni. Add Rapportive to Gmail Similar Articles Productive Geek Tips How to Import Gmail Contacts Into Outlook 2007Enhance Your Gmail Account in ChromeFigure out which Online accounts are selling your email to spammersAdd Social Bookmarking (Digg This!) Links to your Wordpress BlogFix for New Contact Group Button Not Displaying in Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Easily Search Food Recipes With Recipe Chimp Tech Fanboys Field Guide Check these Awesome Chrome Add-ons iFixit Offers Gadget Repair Manuals Online Vista style sidebar for Windows 7 Create Nice Charts With These Web Based Tools

  Read the article

• WSS 3.0/MOSS 2007 Active Directory Forms Based Authentication PeoplePicker no users found

  - by John Haigh

  WSS 3.0/MOSS 2007 Active Directory Forms Based Authentication PeoplePicker no users found After finding these steps online from http://dattard.blogspot.com/2008/11/active-directory-forms-based.html in order to setup Active Directory Forms Based Authentication I was all set to complete this task, except for one problem. These steps are missing one very important vital step in order for FBA to work with Active Directory. A supplement to step 3 before granting access in step 5 through the people picker. You need to specify the Active Directory Provider Name to the people picker, otherwise you will not be able specify users through the Policy for Web Application. <PeoplePickerWildcards>       <clear />          <add key="ADMembershipProvider" value="%" />     </PeoplePickerWildcards> Recently we needed to use Forms Based Authentication with Active Directory from an Extranet. This is how we got it to work. 1. Extend the Web Application Instead of tweaking the internal web app, Extend the web application you want to expose to the Extranet, giving it the required host headers etc. 2. Configure SharePoint Central Admin to use FBA for the "new" Web Applications Login to SharePoint Central Admin Go to Application Management / Application Security / Authentication Providers and Change the Web Application to the one which needs to be configured for Forms Based Authentication Click zone / default, change authentication type to forms and enter ActiveDirectoryMemebershipProvider under membership provider name ( for example , "ADMembershipProvider") and save this change 3. Update the web.config of SharePoint Central admin site under configuration node <connectionStrings> <add name="ADConnectionString" connectionString="LDAP://DynamicsAX.local/CN=Users,DC=DynamicsAX,DC=local /> </connectionStrings> under system.web node <membership defaultProvider="ADMembershipProvider"> <providers> <add name="ADMembershipProvider" type="System.Web.Security.ActiveDirectoryMembershipProvider,System.Web,Version=2.0.0.0,Culture=neutral,PublicKeyToken=b03f5f7f11d50a3a" connectionStringName="ADConnectionString" connectionUsername="xxx" connectionPassword="yyy" enableSearchMethods="true" attributeMapUsername="sAMAccountName"/> </providers> </membership> 4.Update the web.config of SharePoint Web application Repeat step 3 for the web.config of the SharePoint webapplication to be configured for Forms Based Authentication Change the authentication in web.config to <authentication mode="Forms"> <forms loginUrl="/_layouts/login.aspx"></forms> </authentication> 5. Grant Access on the extended Web Application Your extranet web application is now configured to use FBA. However, until users, who will be accessing the site via FBA, are given permissions for the site, it will be inaccessible to them. To get started, open your browser and navigate to your farm’s Central Administration site. Click on Application Management and then click on Policy for Web Application. Make sure that you are working on the extranet web application. Do the following steps: Click on Add Users. In the Zones drop down, select the appropriate Extranet zone. IMPORTANT: If you select the incorrect zone, you may not be able to resolve user names. Hence, the zone you select must match the zone of the web application that is configured to use FBA. Click the Next button. In the Users edit box, type the name of the FBA user whom you wish to have full control for the site. Click the Resolve link next to the Users edit box. If the web application's FBA information has been configured correctly, the name will resolve and become underlined. Check the Full Control checkbox. Click the Finish button.

  Read the article

< Previous Page | 552 553 554 555 556 557 558 559 560 561 562 563  | Next Page >