Search Results

Search found 14483 results on 580 pages for 'major mode'.

Page 556/580 | < Previous Page | 552 553 554 555 556 557 558 559 560 561 562 563  | Next Page >

• problems mounting an external IDE drive via USB in ubuntu

  - by Roy Rico

  I am having a problem connecting a specific IDE drive to my linux box. It's an old drive which I just want to get about 3 GB of files off of. INFO I am trying to connect a 200GB IDE Maxtor Drive, internally and externally... externally: I am using an self powered USB IDE external drive enclosure which I have used to connect various drives, under ubuntu and windows, in the past. The other posts stated it coudl be a problem I think i may have formatted the /dev/sdc partition instead of /dev/sdc1 partition when i originally formatted the drive. internally: I only have one machine left that has an internal IDE interface, and it's got XP on it. I plugged this drive internally into this machine with windows XP and used the ext2/ext3 drivers to mount this drive, but some files have question marks (?) in the file names which is messing up my copy process in windows. I can't delete the files under windows. Ubuntu Linux will not install on my only remaining machine that has IDE controller. I have tried the suggestions in the questions below http://superuser.com/questions/88182/mount-an-external-drive-in-ubuntu http://superuser.com/questions/23210/ubuntu-fails-to-mount-usb-drive it looks like i can see the drive in /proc/partitions $ cat /proc/partitions major minor #blocks name 8 0 78125000 sda 8 1 74894998 sda1 8 2 1 sda2 8 5 3229033 sda5 8 16 199148544 sdb <-- could be my drive? but it's not listed under fdisk -l $ fdisk -l Disk /dev/sda: 80.0 GB, 80000000000 bytes 255 heads, 63 sectors/track, 9726 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xd0f4738c Device Boot Start End Blocks Id System /dev/sda1 * 1 9324 74894998+ 83 Linux /dev/sda2 9325 9726 3229065 5 Extended /dev/sda5 9325 9726 3229033+ 82 Linux swap / Solaris and here is my log of /var/log/messages. with a bunch of weird output, can someone let me know what that weird output is? Mar 3 19:49:40 mala kernel: [687455.112029] usb 1-7: new high speed USB device using ehci_hcd and address 3 Mar 3 19:49:41 mala kernel: [687455.248576] usb 1-7: configuration #1 chosen from 1 choice Mar 3 19:49:41 mala kernel: [687455.267450] Initializing USB Mass Storage driver... Mar 3 19:49:41 mala kernel: [687455.269180] scsi4 : SCSI emulation for USB Mass Storage devices Mar 3 19:49:41 mala kernel: [687455.269410] usbcore: registered new interface driver usb-storage Mar 3 19:49:41 mala kernel: [687455.269416] USB Mass Storage support registered. Mar 3 19:49:46 mala kernel: [687460.270917] scsi 4:0:0:0: Direct-Access Maxtor 6 Y200P0 YAR4 PQ: 0 ANSI: 2 Mar 3 19:49:46 mala kernel: [687460.271485] sd 4:0:0:0: Attached scsi generic sg2 type 0 Mar 3 19:49:46 mala kernel: [687460.278858] sd 4:0:0:0: [sdb] 398297088 512-byte logical blocks: (203 GB/189 GiB) Mar 3 19:49:46 mala kernel: [687460.280866] sd 4:0:0:0: [sdb] Write Protect is off Mar 3 19:50:16 mala kernel: [687460.283784] sdb: Mar 3 19:50:16 mala kernel: [687491.112020] usb 1-7: reset high speed USB device using ehci_hcd and address 3 Mar 3 19:50:47 mala kernel: [687522.120030] usb 1-7: reset high speed USB device using ehci_hcd and address 3 Mar 3 19:51:18 mala kernel: [687553.112034] usb 1-7: reset high speed USB device using ehci_hcd and address 3 Mar 3 19:51:49 mala kernel: [687584.116025] usb 1-7: reset high speed USB device using ehci_hcd and address 3 Mar 3 19:52:02 mala kernel: [687596.170632] type=1505 audit(1267671122.035:31): operation="profile_replace" pid=8426 name=/usr/lib/cups/backend/cups-pdf Mar 3 19:52:02 mala kernel: [687596.171551] type=1505 audit(1267671122.035:32): operation="profile_replace" pid=8426 name=/usr/sbin/cupsd Mar 3 19:52:06 mala kernel: [687600.908056] async/0 D c08145c0 0 7655 2 0x00000000 Mar 3 19:52:06 mala kernel: [687600.908062] e5601d38 00000046 e5774000 c08145c0 e4c2a848 c08145c0 d203973a 0002713d Mar 3 19:52:06 mala kernel: [687600.908072] c08145c0 c08145c0 e4c2a848 c08145c0 00000000 0002713d c08145c0 f0a98c00 Mar 3 19:52:06 mala kernel: [687600.908079] e4c2a5b0 c20125c0 00000002 e5601d80 e5601d44 c056f3be e5601d78 e5601d4c Mar 3 19:52:06 mala kernel: [687600.908087] Call Trace: Mar 3 19:52:06 mala kernel: [687600.908099] [<c056f3be>] io_schedule+0x1e/0x30 Mar 3 19:52:06 mala kernel: [687600.908107] [<c01b2cf5>] sync_page+0x35/0x40 Mar 3 19:52:06 mala kernel: [687600.908111] [<c056f8f7>] __wait_on_bit_lock+0x47/0x90 Mar 3 19:52:06 mala kernel: [687600.908115] [<c01b2cc0>] ? sync_page+0x0/0x40 Mar 3 19:52:06 mala kernel: [687600.908121] [<c020f390>] ? blkdev_readpage+0x0/0x20 Mar 3 19:52:06 mala kernel: [687600.908125] [<c01b2ca9>] __lock_page+0x79/0x80 Mar 3 19:52:06 mala kernel: [687600.908130] [<c015c130>] ? wake_bit_function+0x0/0x50 Mar 3 19:52:06 mala kernel: [687600.908135] [<c01b459f>] read_cache_page_async+0xbf/0xd0 Mar 3 19:52:06 mala kernel: [687600.908139] [<c01b45c2>] read_cache_page+0x12/0x60 Mar 3 19:52:06 mala kernel: [687600.908144] [<c0232dca>] read_dev_sector+0x3a/0x80 Mar 3 19:52:06 mala kernel: [687600.908148] [<c0233d3e>] adfspart_check_ICS+0x1e/0x160 Mar 3 19:52:06 mala kernel: [687600.908152] [<c023339f>] ? disk_name+0xaf/0xc0 Mar 3 19:52:06 mala kernel: [687600.908157] [<c0233d20>] ? adfspart_check_ICS+0x0/0x160 Mar 3 19:52:06 mala kernel: [687600.908161] [<c02334de>] check_partition+0x10e/0x180 Mar 3 19:52:06 mala kernel: [687600.908165] [<c02335f6>] rescan_partitions+0xa6/0x330 Mar 3 19:52:06 mala kernel: [687600.908171] [<c0312472>] ? kobject_get+0x12/0x20 Mar 3 19:52:06 mala kernel: [687600.908175] [<c0312472>] ? kobject_get+0x12/0x20 Mar 3 19:52:06 mala kernel: [687600.908180] [<c039fc43>] ? get_device+0x13/0x20 Mar 3 19:52:06 mala kernel: [687600.908185] [<c03c263f>] ? sd_open+0x5f/0x1b0 Mar 3 19:52:06 mala kernel: [687600.908189] [<c020fda0>] __blkdev_get+0x140/0x310 Mar 3 19:52:06 mala kernel: [687600.908194] [<c020f0ac>] ? bdget+0xec/0x100 Mar 3 19:52:06 mala kernel: [687600.908198] [<c020ff7a>] blkdev_get+0xa/0x10 Mar 3 19:52:06 mala kernel: [687600.908202] [<c0232f30>] register_disk+0x120/0x140 Mar 3 19:52:06 mala kernel: [687600.908207] [<c0308b4d>] ? blk_register_region+0x2d/0x40 Mar 3 19:52:06 mala kernel: [687600.908211] [<c03084f0>] ? exact_match+0x0/0x10 Mar 3 19:52:06 mala kernel: [687600.908216] [<c0308cf0>] add_disk+0x80/0x140 Mar 3 19:52:06 mala kernel: [687600.908221] [<c03084f0>] ? exact_match+0x0/0x10 Mar 3 19:52:06 mala kernel: [687600.908225] [<c0308860>] ? exact_lock+0x0/0x20 Mar 3 19:52:06 mala kernel: [687600.908230] [<c03c53df>] sd_probe_async+0xff/0x1c0

  Read the article

• How does one get rid of fishy behavior in Windows?

  - by Tom Wijsman

  After I had boot my computer this morning there suddenly flooded water from the top of the screen, after which some fishes dropped into it. Now I can barely see what I am doing because the water distorts the view. Sometimes the fish follow the cursor so I need to move it away or wait for the fish to mind their own business. This makes it very annoying to use my system. What have I tried? Reboot the system. This caused the water to deplete from the desktop. Upon reboot, the screen was refilled with water and fishes. Attach another monitor. Same problem, fills that monitor as well and gives me extra fish. Clicking the fish. Makes them turn direction. Right clicking the fish. Changes color of the fish, not really useful. I'm locked out of changing the background or screen saver settings. Hence, I had to post the lady below... Safe mode doesn't save me from the fishes. It does give me another background there, but I can't screenshot easily. Other user accounts experience this as well. The Guest account seems to experience more fish than the other accounts. Using HijackThis, OTL Timekeeper List, Syninternal Autoruns, RootKitRevealer, ShellExView and similar tools I can't seem to find any entries that could be it, the Sysinternals tools show everything as verified. I'm suspecting this to be a driver problem. Randomly removing drivers doesn't seem to alleviate the problem. When removing the Graphics Drivers, it makes my screen black. While that could be considered the solution, it's not what I want. Changing the time / date settings does also not seem to affect the fishes. Changing the time a few years in the future, I would have expected the fishes to be dead. But, the same fishes are still there... They simply won't die! Tried to get used to them. They are really bothering me, looks like they require food. I don't know how to give them food, but apparently they get it elsewhere during reboot... Tried to disable my mouse pointer and use the keyboard. This works, they now swim around more randomly. They do put their attention to huge changes on the screen, so I need to type slow. Or otherwise I can't see what I'm tying exactly. Hold my laptop upside down. This seems to affect the water and fishes, but the water stays in the screen. They seem super resistant against water sickness and confusion though... What does the problem look like? What do I need? A way to get rid of these fishes on my screen forever, they are really annoying me a lot and I'm about to crack the screen to see if that makes them escape. Do you have any idea why this problem is occurring? What are my considerations? Buying an USB fish tank could make the fish leave the screen, I am uncertain though whether the fish could leave the screen through the USB cable. Using the FISh (programming language) which seems to provide EXPRESSIVE POWER and EFFICIENT EXECUTION, I can however not find any examples on how to remove fish. What are my Specifications? I'm using a Sony Vaio Fishy laptop. Sony VAIO VGN-Fishy, VAIO. Processor: 1337 MHz, Intel Core 2 Duo, T5432, 1 MB, Intel PM965 Express, 667 MHz. Memory: 1024 MB, DDR2-SDRAM, 667 MHz, 2 x 1024 MB, 4 GB. Disk Drive: 50 GB, Serial ATA, 5400 RPM. Storage Media: Memory Stick™, Memory Stick PRO™. Display: 15.4 ", 1280 x 800 pixels, LCD. Video: GeForce 8400M GT, 128 MB. Optical Drive: DVD±R/RW DL, 24 x, 24 x, 24 x, 6 x, 4 x, 6 x, 4 x, 5 x, 5 x, 8 x, 8 x, 8 x, 8 x, 6 x, 6 x, 24 x, 24 x, 24 x, 16 x. Camera: 1.3 MP, 30 fps. Networking: 2.0+EDR. Keyboard: Touchpad, AZERTY. Operating System/Software: Windows Vista Home Premium. Security: Kensington. Weight & Dimensions: 98.8 oz (2800 g), 14 " (355.8 mm), 10 " (254.4 mm), 0.98 " (24.9 mm). Other features: 100 BASE-TX/10 BASE-T, 802.11a/b/g/n/Draft n, V92/V.90, fishes. Plz! Help me...

  Read the article

• 401 Using Multiple Authentication methods IE 10 only

  - by jon3laze

  I am not sure if this is more of a coding issue or server setup issue so I've posted it on stackoverflow and here... On our production site we've run into an issue that is specific to Internet Explorer 10. I am using jQuery doing an ajax POST to a web service on the same domain and in IE10 I am getting a 401 response, IE9 works perfectly fine. I should mention that we have mirrored code in another area of our site and it works perfectly fine in IE10. The only difference between the two areas is that one is under a subdomain and the other is at the root level. www.my1stdomain.com vs. portal.my2nddomain.com The directory structure on the server for these are: \my1stdomain\webservice\name\service.aspx \portal\webservice\name\service.aspx Inside of the \portal\ and \my1stdomain\ folders I have a page that does an ajax call, both pages are identical. $.ajax({ type: 'POST', url: '/webservice/name/service.aspx/function', cache: false, contentType: 'application/json; charset=utf-8', dataType: 'json', data: '{ "json": "data" }', success: function() { }, error: function() { } }); I've verified permissions are the same on both folders on the server side. I've applied a workaround fix of placing the <meta http-equiv="X-UA-Compatible" value="IE=9"> to force compatibility view (putting IE into compatibility mode fixes the issue). This seems to be working in IE10 on Windows 7, however IE 10 on Windows 8 still sees the same issue. These pages are classic asp with the headers that are being included, also there are no other meta tags being used. The doctype is being specified as <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//" "http://www.w3.org/TR/html4/loose.dtd"> on the portal page and <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> on the main domain. UPDATE1 I used Microsoft Network Monitor 3.4 on the server to capture the request. I used the following filter to capture the 401: Property.HttpStatusCode.StringToNumber == 401 This was the response - Http: Response, HTTP/1.1, Status: Unauthorized, URL: /webservice/name/service.aspx/function Using Multiple Authetication Methods, see frame details ProtocolVersion: HTTP/1.1 StatusCode: 401, Unauthorized Reason: Unauthorized - ContentType: application/json; charset=utf-8 - MediaType: application/json; charset=utf-8 MainType: application/json charset: utf-8 Server: Microsoft-IIS/7.0 jsonerror: true - WWWAuthenticate: Negotiate - Authenticate: Negotiate WhiteSpace: AuthenticateData: Negotiate - WWWAuthenticate: NTLM - Authenticate: NTLM WhiteSpace: AuthenticateData: NTLM XPoweredBy: ASP.NET Date: Mon, 04 Mar 2013 21:13:39 GMT ContentLength: 105 HeaderEnd: CRLF - payload: HttpContentType = application/json; charset=utf-8 HTTPPayloadLine: {"Message":"Authentication failed.","StackTrace":null,"ExceptionType":"System.InvalidOperationException"} The thing here that really stands out is Unauthorized, URL: /webservice/name/service.aspx/function Using Multiple Authentication Methods With this I'm still confused as to why this only happens in IE10 if it's a permission/authentication issue. What was added to 10, or where should I be looking for the root cause of this? UPDATE2 Here are the headers from the client machine from fiddler (server information removed): Main SESSION STATE: Done. Request Entity Size: 64 bytes. Response Entity Size: 9 bytes. == FLAGS ================== BitFlags: [ServerPipeReused] 0x10 X-EGRESSPORT: 44537 X-RESPONSEBODYTRANSFERLENGTH: 9 X-CLIENTPORT: 44770 UI-COLOR: Green X-CLIENTIP: 127.0.0.1 UI-OLDCOLOR: WindowText UI-BOLD: user-marked X-SERVERSOCKET: REUSE ServerPipe#46 X-HOSTIP: ***.***.***.*** X-PROCESSINFO: iexplore:2644 == TIMING INFO ============ ClientConnected: 14:43:08.488 ClientBeginRequest: 14:43:08.488 GotRequestHeaders: 14:43:08.488 ClientDoneRequest: 14:43:08.488 Determine Gateway: 0ms DNS Lookup: 0ms TCP/IP Connect: 0ms HTTPS Handshake: 0ms ServerConnected: 14:40:28.943 FiddlerBeginRequest: 14:43:08.488 ServerGotRequest: 14:43:08.488 ServerBeginResponse: 14:43:08.592 GotResponseHeaders: 14:43:08.592 ServerDoneResponse: 14:43:08.592 ClientBeginResponse: 14:43:08.592 ClientDoneResponse: 14:43:08.592 Overall Elapsed: 0:00:00.104 The response was buffered before delivery to the client. == WININET CACHE INFO ============ This URL is not present in the WinINET cache. [Code: 2] Portal SESSION STATE: Done. Request Entity Size: 64 bytes. Response Entity Size: 105 bytes. == FLAGS ================== BitFlags: [ClientPipeReused, ServerPipeReused] 0x18 X-EGRESSPORT: 44444 X-RESPONSEBODYTRANSFERLENGTH: 105 X-CLIENTPORT: 44439 X-CLIENTIP: 127.0.0.1 X-SERVERSOCKET: REUSE ServerPipe#7 X-HOSTIP: ***.***.***.*** X-PROCESSINFO: iexplore:7132 == TIMING INFO ============ ClientConnected: 14:37:59.651 ClientBeginRequest: 14:38:01.397 GotRequestHeaders: 14:38:01.397 ClientDoneRequest: 14:38:01.397 Determine Gateway: 0ms DNS Lookup: 0ms TCP/IP Connect: 0ms HTTPS Handshake: 0ms ServerConnected: 14:37:57.880 FiddlerBeginRequest: 14:38:01.397 ServerGotRequest: 14:38:01.397 ServerBeginResponse: 14:38:01.464 GotResponseHeaders: 14:38:01.464 ServerDoneResponse: 14:38:01.464 ClientBeginResponse: 14:38:01.464 ClientDoneResponse: 14:38:01.464 Overall Elapsed: 0:00:00.067 The response was buffered before delivery to the client. == WININET CACHE INFO ============ This URL is not present in the WinINET cache. [Code: 2]

  Read the article

• Confirm disk is broken when it passes all diagnostics

  - by Halfgaar

  I have a system with a potentially broken disk, but the disk passes all manner of diagnostics. I have been unable to confirm that the disk is broken. What are my options? I could just replace the disk, but because this situation is very similar to another more severe situation I have (long story), I'd like to actually make a proper diagnosis as opposed to randomly binning hardware. The issue and history is this: I had a Debian Linux PC (500 MHz P3) acting as router, nagios and munin. It crashed every couple of weeks. No logs or dmesg could be obtained (because it's an old Compaq that only boots when you configure it as keyboardless, making connecting a keyboard later, once it's booted, impossible). At the time, I just replaced the computer with another Compaq (P4 2.4 GHz) because I thought the hardware was faulty. However, it still crashed every couple of weeks. the difference is that on this computer, I can still SSH into it. It gives all kinds of errors on hda. I'd like to confirm that the disk is broken, but nothing I do confirms this: SMART error logs shows no errors. Normally when a disk starts acting up, SMART my pass, but it still records a read-error in the error log. SMART self-test (smartctl -t long /dev/sda) completes without errors. re-allocated sector count (a tell-tale parameter) has been 31 all its life, even when the disk was still in use in my desktop PC years ago, and it still is. The figure never changed. dd if=/dev/sda of=/dev/null bs=4096 passes with flying colors. What else can I do to assess the health of the drive? Again, this is not about making this router fully functional again, this is a disk forensic question, because it just so happens that I have another server that potentially has the same problem, and knowing the answer to this will possibly help me greatly. For the record, below are logs and such. This is the smartctl -a output: smartctl 5.40 2010-07-12 r3124 [i686-pc-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus family Device Model: ST3120026A Serial Number: 5JT1CLQM Firmware Version: 3.06 User Capacity: 120,034,123,776 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 6 ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2 Local Time is: Mon Jul 1 21:18:33 2013 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 24) The self-test routine was aborted by the host. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 050 046 006 Pre-fail Always - 47766662 3 Spin_Up_Time 0x0003 097 096 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 10 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 31 7 Seek_Error_Rate 0x000f 084 060 030 Pre-fail Always - 820305 9 Power_On_Hours 0x0032 048 048 000 Old_age Always - 46373 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 605 194 Temperature_Celsius 0x0022 036 065 000 Old_age Always - 36 195 Hardware_ECC_Recovered 0x001a 050 046 000 Old_age Always - 47766662 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 196 000 Old_age Always - 6 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Aborted by host 80% 46361 - # 2 Extended offline Completed without error 00% 46358 - # 3 Short offline Completed without error 00% 12046 - # 4 Extended offline Completed without error 00% 10472 - # 5 Short offline Completed without error 00% 10471 - # 6 Short offline Completed without error 00% 10471 - # 7 Short offline Completed without error 00% 6770 - # 8 Extended offline Aborted by host 90% 5958 - # 9 Extended offline Aborted by host 90% 5951 - #10 Short offline Completed without error 00% 5024 - #11 Extended offline Aborted by host 80% 5024 - #12 Short offline Completed without error 00% 3697 - #13 Short offline Completed without error 00% 237 - #14 Short offline Completed without error 00% 145 - #15 Short offline Completed without error 00% 69 - #16 Extended offline Completed without error 00% 68 - #17 Short offline Completed without error 00% 66 - #18 Short offline Completed without error 00% 49 - #19 Short offline Completed without error 00% 29 - #20 Short offline Completed without error 00% 29 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. And this is the dmesg error when it has crashed (which repeats for a bunch of different sectors): [1755091.211136] sd 0:0:0:0: [sda] Unhandled error code [1755091.211144] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [1755091.211151] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 08 fe ad 38 00 00 08 00 [1755091.211166] end_request: I/O error, dev sda, sector 150908216

  Read the article

• Exposing the AnyConnect HTTPS service to outside network

  - by Maciej Swic

  We have a Cisco ASA 5505 with firmware ASA9.0(1) and ASDM 7.0(2). It is configured with a public ip address, and when trying to reach it from the outside by HTTPS for AnyConnect VPN, we get the following log output: 6 Nov 12 2012 07:01:40 <client-ip> 51000 <asa-ip> 443 Built inbound TCP connection 2889 for outside:<client-ip>/51000 (<client-ip>/51000) to identity:<asa-ip>/443 (<asa-ip>/443) 6 Nov 12 2012 07:01:40 <client-ip> 50999 <asa-ip> 443 Built inbound TCP connection 2890 for outside:<client-ip>/50999 (<client-ip>/50999) to identity:<asa-ip>/443 (<asa-ip>/443) 6 Nov 12 2012 07:01:40 <client-ip> 51000 <asa-ip> 443 Teardown TCP connection 2889 for outside:<client-ip>/51000 to identity:<asa-ip>/443 duration 0:00:00 bytes 0 No valid adjacency 6 Nov 12 2012 07:01:40 <client-ip> 50999 <asa-ip> 443 Teardown TCP connection 2890 for outside:<client-ip>/50999 to identity:<asa-ip>/443 duration 0:00:00 bytes 0 No valid adjacency We finished the startup wizard and the anyconnect vpn wizard and here is the resulting configuration: Cryptochecksum: 12262d68 23b0d136 bb55644a 9c08f86b : Saved : Written by enable_15 at 07:08:30.519 UTC Mon Nov 12 2012 ! ASA Version 9.0(1) ! hostname vpn domain-name office.<redacted>.com enable password <redacted> encrypted passwd <redacted> encrypted names ip local pool vpn-pool 192.168.67.2-192.168.67.253 mask 255.255.255.0 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! interface Vlan1 nameif inside security-level 100 ip address 192.168.68.250 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address <redacted> 255.255.255.248 ! ftp mode passive dns server-group DefaultDNS domain-name office.<redacted>.com object network obj_any subnet 0.0.0.0 0.0.0.0 pager lines 24 logging enable logging asdm informational mtu outside 1500 mtu inside 1500 icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 no arp permit-nonconnected ! object network obj_any nat (inside,outside) dynamic interface timeout xlate 3:00:00 timeout pat-xlate 0:00:30 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 dynamic-access-policy-record DfltAccessPolicy user-identity default-domain LOCAL http server enable http 192.168.68.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart crypto ipsec ikev2 ipsec-proposal DES protocol esp encryption des protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal 3DES protocol esp encryption 3des protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES protocol esp encryption aes protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES192 protocol esp encryption aes-192 protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES256 protocol esp encryption aes-256 protocol esp integrity sha-1 md5 crypto ipsec security-association pmtu-aging infinite crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map outside_map interface outside crypto map inside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map inside_map interface inside crypto ca trustpoint _SmartCallHome_ServerCA crl configure crypto ca trustpoint ASDM_TrustPoint0 enrollment self subject-name CN=vpn proxy-ldc-issuer crl configure crypto ca trustpool policy crypto ca certificate chain _SmartCallHome_ServerCA certificate ca 6ecc7aa5a7032009b8cebcf4e952d491 <redacted> quit crypto ca certificate chain ASDM_TrustPoint0 certificate f678a050 <redacted> quit crypto ikev2 policy 1 encryption aes-256 integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 10 encryption aes-192 integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 20 encryption aes integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 30 encryption 3des integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 40 encryption des integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 enable outside client-services port 443 crypto ikev2 remote-access trustpoint ASDM_TrustPoint0 telnet timeout 5 ssh 192.168.68.0 255.255.255.0 inside ssh timeout 5 console timeout 0 vpn-addr-assign local reuse-delay 60 dhcpd auto_config outside ! dhcpd address 192.168.68.254-192.168.68.254 inside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept ssl trust-point ASDM_TrustPoint0 inside ssl trust-point ASDM_TrustPoint0 outside webvpn enable outside enable inside anyconnect image disk0:/anyconnect-win-3.1.01065-k9.pkg 1 anyconnect image disk0:/anyconnect-linux-3.1.01065-k9.pkg 2 anyconnect image disk0:/anyconnect-macosx-i386-3.1.01065-k9.pkg 3 anyconnect profiles GM-AnyConnect_client_profile disk0:/GM-AnyConnect_client_profile.xml anyconnect enable tunnel-group-list enable group-policy GroupPolicy_GM-AnyConnect internal group-policy GroupPolicy_GM-AnyConnect attributes wins-server none dns-server value 192.168.68.254 vpn-tunnel-protocol ikev2 ssl-client default-domain value office.<redacted>.com webvpn anyconnect profiles value GM-AnyConnect_client_profile type user username <redacted> password <redacted> encrypted tunnel-group GM-AnyConnect type remote-access tunnel-group GM-AnyConnect general-attributes address-pool vpn-pool default-group-policy GroupPolicy_GM-AnyConnect tunnel-group GM-AnyConnect webvpn-attributes group-alias GM-AnyConnect enable ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum client auto message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect esmtp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect ip-options ! service-policy global_policy global prompt hostname context call-home reporting anonymous Cryptochecksum:12262d6823b0d136bb55644a9c08f86b : end Clearly we are missing something, but the question is, what?

  Read the article

• Error when make "make install" PHP WebDav

  - by kron

  Hi, I'm having issues install PHP WebDAV onto Fedora8 - after downloading and running make install I get the following errors: [root@ip-18-192-114-35 dav]# make install /bin/sh /tmp/dav/libtool --mode=compile gcc -I. -I/tmp/dav -DPHP_ATOM_INC -I/tmp/dav/include -I/tmp/dav/main -I/tmp/dav -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /tmp/dav/dav.c -o dav.lo gcc -I. -I/tmp/dav -DPHP_ATOM_INC -I/tmp/dav/include -I/tmp/dav/main -I/tmp/dav -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /tmp/dav/dav.c -fPIC -DPIC -o .libs/dav.o /tmp/dav/dav.c:21:23: error: ne_socket.h: No such file or directory /tmp/dav/dav.c:22:24: error: ne_session.h: No such file or directory /tmp/dav/dav.c:23:22: error: ne_utils.h: No such file or directory /tmp/dav/dav.c:24:21: error: ne_auth.h: No such file or directory /tmp/dav/dav.c:25:22: error: ne_basic.h: No such file or directory /tmp/dav/dav.c:26:20: error: ne_207.h: No such file or directory /tmp/dav/dav.c:35: error: expected specifier-qualifier-list before 'ne_session' /tmp/dav/dav.c: In function 'dav_destructor_dav_session': /tmp/dav/dav.c:152: error: 'DavSession' has no member named 'sess' /tmp/dav/dav.c:153: error: 'DavSession' has no member named 'sess' /tmp/dav/dav.c:155: error: 'DavSession' has no member named 'base_uri_path' /tmp/dav/dav.c:156: error: 'DavSession' has no member named 'user_name' /tmp/dav/dav.c:157: error: 'DavSession' has no member named 'user_password' /tmp/dav/dav.c:158: error: 'DavSession' has no member named 'sess' /tmp/dav/dav.c: In function 'cb_dav_auth': /tmp/dav/dav.c:194: error: 'DavSession' has no member named 'user_name' /tmp/dav/dav.c:194: error: 'NE_ABUFSIZ' undeclared (first use in this function) /tmp/dav/dav.c:194: error: (Each undeclared identifier is reported only once /tmp/dav/dav.c:194: error: for each function it appears in.) /tmp/dav/dav.c:195: error: 'DavSession' has no member named 'user_password' /tmp/dav/dav.c: In function 'zif_webdav_connect': /tmp/dav/dav.c:212: error: 'ne_session' undeclared (first use in this function) /tmp/dav/dav.c:212: error: 'sess' undeclared (first use in this function) /tmp/dav/dav.c:213: error: 'ne_uri' undeclared (first use in this function) /tmp/dav/dav.c:213: error: expected ';' before 'uri' /tmp/dav/dav.c:215: error: 'uri' undeclared (first use in this function) /tmp/dav/dav.c:259: error: 'DavSession' has no member named 'base_uri_path' /tmp/dav/dav.c:260: error: 'DavSession' has no member named 'base_uri_path_len' /tmp/dav/dav.c:262: error: 'DavSession' has no member named 'user_name' /tmp/dav/dav.c:264: error: 'DavSession' has no member named 'user_name' /tmp/dav/dav.c:267: error: 'DavSession' has no member named 'user_password' /tmp/dav/dav.c:269: error: 'DavSession' has no member named 'user_password' /tmp/dav/dav.c:271: error: 'DavSession' has no member named 'sess' /tmp/dav/dav.c: In function 'get_full_uri': /tmp/dav/dav.c:304: error: 'DavSession' has no member named 'base_uri_path_len' /tmp/dav/dav.c:307: error: 'DavSession' has no member named 'base_uri_path_len' /tmp/dav/dav.c:313: error: 'DavSession' has no member named 'base_uri_path' /tmp/dav/dav.c:313: error: 'DavSession' has no member named 'base_uri_path_len' /tmp/dav/dav.c:314: error: 'DavSession' has no member named 'base_uri_path_len' /tmp/dav/dav.c: In function 'zif_webdav_get': /tmp/dav/dav.c:329: error: 'ne_session' undeclared (first use in this function) /tmp/dav/dav.c:329: error: 'sess' undeclared (first use in this function) /tmp/dav/dav.c:330: error: 'ne_request' undeclared (first use in this function) /tmp/dav/dav.c:330: error: 'req' undeclared (first use in this function) /tmp/dav/dav.c:348: error: 'DavSession' has no member named 'sess' /tmp/dav/dav.c:354: error: 'ne_accept_2xx' undeclared (first use in this function) /tmp/dav/dav.c:359: error: 'NE_OK' undeclared (first use in this function) /tmp/dav/dav.c:359: error: invalid type argument of '->' /tmp/dav/dav.c: In function 'zif_webdav_put': /tmp/dav/dav.c:377: error: 'ne_session' undeclared (first use in this function) /tmp/dav/dav.c:377: error: 'sess' undeclared (first use in this function) /tmp/dav/dav.c:378: error: 'ne_request' undeclared (first use in this function) /tmp/dav/dav.c:378: error: 'req' undeclared (first use in this function) /tmp/dav/dav.c:396: error: 'DavSession' has no member named 'sess' /tmp/dav/dav.c:405: error: 'NE_OK' undeclared (first use in this function) /tmp/dav/dav.c:405: error: invalid type argument of '->' /tmp/dav/dav.c: In function 'zif_webdav_delete': /tmp/dav/dav.c:422: error: 'ne_session' undeclared (first use in this function) /tmp/dav/dav.c:422: error: 'sess' undeclared (first use in this function) /tmp/dav/dav.c:423: error: 'ne_request' undeclared (first use in this function) /tmp/dav/dav.c:423: error: 'req' undeclared (first use in this function) /tmp/dav/dav.c:441: error: 'DavSession' has no member named 'sess' /tmp/dav/dav.c:448: error: 'NE_OK' undeclared (first use in this function) /tmp/dav/dav.c:448: error: invalid type argument of '->' /tmp/dav/dav.c: In function 'zif_webdav_mkcol': /tmp/dav/dav.c:465: error: 'ne_session' undeclared (first use in this function) /tmp/dav/dav.c:465: error: 'sess' undeclared (first use in this function) /tmp/dav/dav.c:466: error: 'ne_request' undeclared (first use in this function) /tmp/dav/dav.c:466: error: 'req' undeclared (first use in this function) /tmp/dav/dav.c:484: error: 'DavSession' has no member named 'sess' /tmp/dav/dav.c:491: error: 'NE_OK' undeclared (first use in this function) /tmp/dav/dav.c:491: error: invalid type argument of '->' /tmp/dav/dav.c: In function 'zif_webdav_copy': /tmp/dav/dav.c:510: error: 'ne_session' undeclared (first use in this function) /tmp/dav/dav.c:510: error: 'sess' undeclared (first use in this function) /tmp/dav/dav.c:511: error: 'ne_request' undeclared (first use in this function) /tmp/dav/dav.c:511: error: 'req' undeclared (first use in this function) /tmp/dav/dav.c:539: error: 'DavSession' has no member named 'sess' /tmp/dav/dav.c:550: error: 'NE_DEPTH_INFINITE' undeclared (first use in this function) /tmp/dav/dav.c:550: error: 'NE_DEPTH_ZERO' undeclared (first use in this function) /tmp/dav/dav.c:554: error: 'NE_OK' undeclared (first use in this function) /tmp/dav/dav.c:554: error: invalid type argument of '->' /tmp/dav/dav.c: In function 'zif_webdav_move': /tmp/dav/dav.c:573: error: 'ne_session' undeclared (first use in this function) /tmp/dav/dav.c:573: error: 'sess' undeclared (first use in this function) /tmp/dav/dav.c:574: error: 'ne_request' undeclared (first use in this function) /tmp/dav/dav.c:574: error: 'req' undeclared (first use in this function) /tmp/dav/dav.c:598: error: 'DavSession' has no member named 'sess' /tmp/dav/dav.c:611: error: 'NE_OK' undeclared (first use in this function) /tmp/dav/dav.c:611: error: invalid type argument of '->' make: *** [dav.lo] Error 1 Any help would be much appreciated. Thanks!

  Read the article

• Trouble recovering MySQL InnoDB database after server crash

  - by Andy Shinn

  I had a server crash due to a broken iSCSI link (the filesystem went into read-only mode). After repairing the link and rebooting the machine (CentOS 5 / MySQL 5.1), the MySQL server would not start and gave the following error: 100603 19:11:46 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql InnoDB: The log sequence number in ibdata files does not match InnoDB: the log sequence number in the ib_logfiles! 100603 19:11:46 InnoDB: Database was not shut down normally! InnoDB: Starting crash recovery. InnoDB: Reading tablespace information from the .ibd files... InnoDB: Restoring possible half-written data pages from the doublewrite InnoDB: buffer... InnoDB: Warning: database page corruption or a failed InnoDB: file read of page 112541. InnoDB: Trying to recover it from the doublewrite buffer. InnoDB: Dump of the page: 100603 19:11:46 InnoDB: Page dump in ascii and hex (16384 bytes): lots of binary data 100603 19:11:46 InnoDB: Page checksum 953720272, prior-to-4.0.14-form checksum 2641912043 InnoDB: stored checksum 617821918, prior-to-4.0.14-form stored checksum 2080617765 InnoDB: Page lsn 115 2632899642, low 4 bytes of lsn at page end 2641594600 InnoDB: Page number (if stored to page already) 112541, InnoDB: space id (if created with = MySQL-4.1.1 and stored already) 0 InnoDB: Page may be an index page where index id is 0 616 InnoDB: Dump of corresponding page in doublewrite buffer: 100603 19:11:46 InnoDB: Page dump in ascii and hex (16384 bytes): more binary data 100603 19:11:46 InnoDB: Page checksum 908374788, prior-to-4.0.14-form checksum 824841363 InnoDB: stored checksum 912869634, prior-to-4.0.14-form stored checksum 2210927931 InnoDB: Page lsn 115 2635312169, low 4 bytes of lsn at page end 2633173354 InnoDB: Page number (if stored to page already) 112541, InnoDB: space id (if created with = MySQL-4.1.1 and stored already) 0 InnoDB: Page may be an index page where index id is 0 616 InnoDB: Also the page in the doublewrite buffer is corrupt. InnoDB: Cannot continue operation. InnoDB: You can try to recover the database with the my.cnf InnoDB: option: InnoDB: innodb_force_recovery=6 100603 19:11:46 mysqld_safe mysqld from pid file /var/run/mysqld/mysqld.pid ended Per the error message, I have tried setting set-variable=innodb_force_recovery=6 in the my.cnf to get to the data. This allows the MySQL server to start. But when I try to do a mysqldump of the database or a SELECT * INTO OUTFILE "filename" FROM broken_table; it seems to endlessly just export the same line over and over again. I have also tried http://code.google.com/p/innodb-tools/. But this tool fails with an error that 'blob' type is not supported. If I try to access the data using the PHP application it crashes MySQL: `100603 19:19:19 - mysqld got signal 11 ; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=8384512 read_buffer_size=131072 max_used_connections=2 max_threads=151 threads_connected=2 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 338317 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd: 0x15d33f0 Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... stack_bottom = 0x453aff00 thread_stack 0x40000 /usr/libexec/mysqld(my_print_stacktrace+0x24) [0x874364] /usr/libexec/mysqld(handle_segfault+0x346) [0x5c9166] /lib64/libpthread.so.0 [0x3a6e40eb10] /usr/libexec/mysqld(rec_get_offsets_func+0x30) [0x7cc310] /usr/libexec/mysqld [0x7674d8] /usr/libexec/mysqld(btr_search_info_update_slow+0x638) [0x768d48] /usr/libexec/mysqld(btr_cur_search_to_nth_level+0xc7d) [0x75f86d] /usr/libexec/mysqld [0x7dd1c1] /usr/libexec/mysqld(row_search_for_mysql+0x18b0) [0x7e03d0] /usr/libexec/mysqld(ha_innobase::general_fetch(unsigned char*, unsigned int, unsigned int)+0x7c) [0x7526fc] /usr/libexec/mysqld(handler::read_multi_range_next(st_key_multi_range**)+0x29) [0x6aed09] /usr/libexec/mysqld(QUICK_RANGE_SELECT::get_next()+0x194) [0x69a964] /usr/libexec/mysqld [0x6aafe9] /usr/libexec/mysqld(sub_select(JOIN*, st_join_table*, bool)+0x56) [0x635196] /usr/libexec/mysqld [0x63f9cd] /usr/libexec/mysqld(JOIN::exec()+0x950) [0x6497c0] /usr/libexec/mysqld(mysql_select(THD*, Item*, TABLE_LIST*, unsigned int, List&, Item*, unsigned int, st_order*, st_order*, Item*, st_order*, unsign ed long long, select_result*, st_select_lex_unit*, st_select_lex*)+0x17b) [0x64b34b] /usr/libexec/mysqld(handle_select(THD*, st_lex*, select_result*, unsigned long)+0x169) [0x64bc79] /usr/libexec/mysqld [0x5d34b6] /usr/libexec/mysqld(mysql_execute_command(THD*)+0x4e5) [0x5d6b45] /usr/libexec/mysqld(mysql_parse(THD*, char const*, unsigned int, char const)+0x211) [0x5dc321] /usr/libexec/mysqld(dispatch_command(enum_server_command, THD*, char*, unsigned int)+0x10b8) [0x5dd3f8] /usr/libexec/mysqld(do_command(THD*)+0xe6) [0x5dd9e6] /usr/libexec/mysqld(handle_one_connection+0x73d) [0x5d036d] /lib64/libpthread.so.0 [0x3a6e40673d] /lib64/libc.so.6(clone+0x6d) [0x3a6d4d3d1d] Trying to get some variables. Some pointers may be invalid and cause the dump to abort... thd-query at 0x15de5e0 = SELECT DISTINCT count(DISTINCT i.itemid) as rowscount,i.hostid FROM items i WHERE ((i.itemid BETWEEN 000000000000000 AND 0999999 99999999)) AND i.type<9 AND (i.hostid IN (10017,10047,10050,10054,10056,10059,10062,10063,10064,10065,10066,10067,10068,10069,10070,10071,10072,10073,100 74,10075,10076,10077,10078,10079,10080,10081,10082,10084,10088,10089,10090,10091,10092,10093,10094,10095,10096,10097,10098,10099,10100,10101,10102,10103,10 104,10105,10106,10107,10108,10109)) GROUP BY i.hostid thd-thread_id=3 thd-killed=NOT_KILLED The manual page at contains information that should help you find out what is causing the crash. 100603 19:19:19 mysqld_safe Number of processes running now: 0 100603 19:19:19 mysqld_safe mysqld restarted` Before recovering form an older backup as a last resort I am looking for anymore suggestions. Thanks!

  Read the article

• GRUB-2 Bootloader fails to load for lack of floppy drive. Ubuntu 10.4 & Windows XP

  - by kammer

  2010.07.21 while trying to install Ubuntu 10.4 Hello all, I've been trying to install Ubuntu 10.04 on my Dell workstation and am unable to get the Grub-2 bootloader to load properly. It seems to be failing for lack of a floppy drive on the system resulting in an error message that reads : error: fd0 cannot get C/H/S values. I've gone through the Grub-2 page at https://help.ubuntu.com/community/Grub2 to no avail and other sources having similar problems have likewise turned up no solutions. I would certainly appreciate any insight, here's the background: A while back I was trying to install a different version of Linux and had the same problems, then had to set the project aside for a bit. I don't think this has anything to do with Linux or Ubuntu per se, but rather Grub. The system is an old (4-5 years) Dell workstation that has one drive (128 GB) set up for Windows XP and a second new drive (500GB) which I installed for Linux. There is a DVD/CD drive and the system contains no floppy drive at all. In one attempt to get this working I tried modifying the BIOS to indicate there was a floppy drive - this created a failure earlier in the chain with the BIOS failing to load properly, not unexpected, just a shot in the dark at that point. At the moment I am considering just running out to buy and install a cheap floppy drive to see if that helps. I'll never use the thing though so I'd rather find a solution that doesn't require me to spend money on useless hardware. In any case, here's the /boot/grub/grub.cfg contents: # # DO NOT EDIT THIS FILE # # It is automatically generated by /usr/sbin/grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then load_env fi set default="0" if [ ${prev_saved_entry} ]; then set saved_entry=${prev_saved_entry} save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z ${boot_once} ]; then saved_entry=${chosen} save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi } insmod ext2 set root='(hd1,1)' search --no-floppy --fs-uuid --set fbebde47-f488-41b0-9480-337802ecb988 if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=640x480 insmod gfxterm insmod vbe if terminal_output gfxterm ; then true ; else # For backward compatibility with versions of terminal.mod that don't # understand terminal_output terminal gfxterm fi fi insmod ext2 set root='(hd1,1)' search --no-floppy --fs-uuid --set fbebde47-f488-41b0-9480-337802ecb988 set locale_dir=($root)/boot/grub/locale set lang=en insmod gettext if [ ${recordfail} = 1 ]; then set timeout=-1 else set timeout=10 fi insmod play play 480 440 1 ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### menuentry 'Ubuntu, with Linux 2.6.32-21-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod ext2 set root='(hd1,1)' search --no-floppy --fs-uuid --set fbebde47-f488-41b0-9480-337802ecb988 linux /boot/vmlinuz-2.6.32-21-generic root=UUID=fbebde47-f488-41b0-9480-337802ecb988 ro quiet splash initrd /boot/initrd.img-2.6.32-21-generic } menuentry 'Ubuntu, with Linux 2.6.32-21-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod ext2 set root='(hd1,1)' search --no-floppy --fs-uuid --set fbebde47-f488-41b0-9480-337802ecb988 echo 'Loading Linux 2.6.32-21-generic ...' linux /boot/vmlinuz-2.6.32-21-generic root=UUID=fbebde47-f488-41b0-9480-337802ecb988 ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.32-21-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod ext2 set root='(hd1,1)' search --no-floppy --fs-uuid --set fbebde47-f488-41b0-9480-337802ecb988 linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod ext2 set root='(hd1,1)' search --no-floppy --fs-uuid --set fbebde47-f488-41b0-9480-337802ecb988 linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Microsoft Windows XP Home Edition (on /dev/sda1)" { insmod ntfs set root='(hd0,1)' search --no-floppy --fs-uuid --set 6ef0d4b4f0d4842d drivemap -s (hd0) ${root} chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### Thoughts anyone? Thanks in advance.

  Read the article

• Skipping scheduled self-tests and predicting drive EOL

  - by Steve Madsen

  For a few weeks now, smartd has been reporting that it is skipping some of its scheduled self-tests on the weekends: Apr 24 18:29:32 calvin smartd[4758]: Device: /dev/sda, skip scheduled Offline Immediate Test; 40% remaining of current Self-Test. Apr 24 18:29:33 calvin smartd[4758]: Device: /dev/sdb, skip scheduled Offline Immediate Test; 50% remaining of current Self-Test. The drives in this RAID-1 array are set to run an offline test four times a day, a short self-test at 2am every day, and a long self-test on Saturdays at 2am. For some reason, it looks like the long self-test is taking longer, causing the other scheduled tests to be skipped. First question: is this a sign of likely drive failure? Then today, smartd reported that a self-test failed. Here is the output of smartctl -a /dev/sdb: smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.8 family Device Model: ST3250823AS Serial Number: 3ND1GNBC Firmware Version: 3.03 User Capacity: 250,059,350,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 7 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Sun Apr 25 13:15:34 2010 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 84) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 047 039 006 Pre-fail Always - 168450357 3 Spin_Up_Time 0x0003 098 098 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 33 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 9 7 Seek_Error_Rate 0x000f 087 060 030 Pre-fail Always - 654745480 9 Power_On_Hours 0x0032 055 055 000 Old_age Always - 40141 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 51 194 Temperature_Celsius 0x0022 037 062 000 Old_age Always - 37 (0 17 0 0) 195 Hardware_ECC_Recovered 0x001a 047 039 000 Old_age Always - 168450357 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 40131 - # 2 Extended offline Completed: read failure 30% 40129 379795511 # 3 Short offline Completed without error 00% 40084 - # 4 Short offline Completed without error 00% 40060 - # 5 Short offline Completed without error 00% 40036 - # 6 Short offline Completed without error 00% 40013 - # 7 Short offline Completed without error 00% 39990 - # 8 Extended offline Completed without error 00% 39977 - # 9 Short offline Completed without error 00% 39919 - #10 Short offline Completed without error 00% 39895 - #11 Short offline Completed without error 00% 39872 - #12 Short offline Completed without error 00% 39848 - #13 Short offline Completed without error 00% 39824 - #14 Short offline Completed without error 00% 39801 - #15 Extended offline Completed without error 00% 39789 - #16 Short offline Completed without error 00% 39754 - #17 Short offline Completed without error 00% 39732 - #18 Short offline Completed without error 00% 39707 - #19 Short offline Completed without error 00% 39683 - #20 Short offline Completed without error 00% 39660 - #21 Short offline Completed without error 00% 39636 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. Given that this drive is about 4.5 years old, I am probably tempting fate by keeping it in service. SMART doesn't seem to get much respect as a reliable way to predict drive failure. What else can I use to get an early indication of drive failure?

  Read the article

• Unicast traffic between hosts on a switch leaving the switch by its uplink. Why?

  - by Rich Lafferty

  I have a weird thing happening on our network at my office which I can't quite get my head around. In particular I can't tell if it's a problem with a switch, or a problem with configuration. We have a Cisco SG300-52 switch (sw01) in the top of a rack in our server room, connected to another SG300-28 that acts as our core switch (core01). Both run layer 2 only, our firewalls do routing between VLANs. They have a dozen or so VLANs between them. Gi1 on sw01 is a trunk port connected to gi1 on core01. (Disclosure: There are other switches in our environment but I'm pretty sure I've isolated the problem down to these two. Happy to provide more info if necessary.) The behaviour I'm seeing is limited to one VLAN, vlan 12 -- or, at least, it's not happening on the other ones I checked (It's hard to guarantee the absence of packets), and it is: sw01 is forwarding, to core01, traffic which is between two hosts which are both plugged into sw01. (I noticed this because the IDS in our firewall gave a false positive on traffic which should not reach the firewall.) We noticed this mostly between our two dhcp/dns servers, net01 (10.12.0.10) and net02 (10.12.0.11). net01 is physical hardware and net02 is on a VMware ESX server. net01 is connected to gi44 on sw01 and net02's ESX server to gi11. [net01]----gi44-[sw01]-gi1----gi1-[core01] [net02]----gi11/ Let's see some interfaces! Remember, vlan 12 is the problem vlan. Of the others I explicitly verified that vlan 27 was not affected. Here's the two hosts' ports: esx01 contains net02. sw01#sh run int gi11 interface gigabitethernet11 description esx01 lldp med disable switchport trunk allowed vlan add 5-7,11-13,100 switchport trunk native vlan 27 ! sw01#sh run int gi44 interface gigabitethernet44 description net01-1 lldp med disable switchport mode access switchport access vlan 12 ! Here's the trunk on sw01. sw01#sh run int gi1 interface gigabitethernet1 description "trunk to core01" lldp med disable switchport trunk allowed vlan add 4-7,11-13,27,100 ! And the other end of the trunk on core01. interface gigabitethernet1 description sw01 macro description switch switchport trunk allowed vlan add 2-7,11-16,27,100 ! I have a monitor port on core01, thus: core01#sh run int gi12 interface gigabitethernet12 description "monitor port" port monitor GigabitEthernet 1 ! And the monitor port on core01 sees unicast traffic going between net01 and net02, both of which are on sw01! I've verified this with a monitor port on sw01 that sees the net01-net02 unicast traffic leaving via gi1 too. sw01 knows that both of those hosts are on ports that are not its trunk port: :) ratchet$ arp -a | grep net net02.2ndsiteinc.com (10.12.0.11) at 00:0C:29:1A:66:15 [ether] on eth0 net01.2ndsiteinc.com (10.12.0.10) at 00:11:43:D8:9F:94 [ether] on eth0 sw01#sh mac addr addr 00:0C:29:1A:66:15 Aging time is 300 sec Vlan Mac Address Port Type -------- --------------------- ---------- ---------- 12 00:0c:29:1a:66:15 gi11 dynamic sw01#sh mac addr addr 00:11:43:D8:9F:94 Aging time is 300 sec Vlan Mac Address Port Type -------- --------------------- ---------- ---------- 12 00:11:43:d8:9f:94 gi44 dynamic I also brought up an unused port on sw01 on vlan 12, but the unicast traffic was (as best as I could tell) not coming out that port. So it doesn't look like sw01 is pushing it out all its ports, just the right ports and also gi1! I've verified that sw01 is not filling up its address-table: sw01#sh mac addr count This may take some time. Capacity : 8192 Free : 7983 Used : 208 The full configs for both core01 and sw01 are available: core01, sw01. Finally, versions: sw01#sh ver SW version 1.1.2.0 ( date 12-Nov-2011 time 23:34:26 ) Boot version 1.0.0.4 ( date 08-Apr-2010 time 16:37:57 ) HW version V01 core01#sh ver SW version 1.1.2.0 ( date 12-Nov-2011 time 23:34:26 ) Boot version 1.1.0.6 ( date 11-May-2011 time 18:31:00 ) HW version V01 So my understanding is this: sw01 should take unicast traffic for net01 and send it only out net02's port, and vice versa; none of it should go out sw01's uplink. But core01, receiving traffic on gi1 for a host it knows is on gi1, is right in sending it out all of its ports. (That is: sw01 is misbehaving, but core01 is doing what it should given the circumstances.) My question is: Why is sw01 sending that unicast traffic out its uplink, gi1? (And pre-emptively: yes, I know SG300s leave much to be desired, and yes, we should have spanning-tree enabled, but that's where I'm at right now.)

  Read the article

• Cisco ASA - Enable communication between same security level

  - by Conor

  I have recently inherited a network with a Cisco ASA (running version 8.2). I am trying to configure it to allow communication between two interfaces configured with the same security level (DMZ-DMZ) "same-security-traffic permit inter-interface" has been set, but hosts are unable to communicate between the interfaces. I am assuming that some NAT settings are causing my issue. Below is my running config: ASA Version 8.2(3) ! hostname asa enable password XXXXXXXX encrypted passwd XXXXXXXX encrypted names ! interface Ethernet0/0 switchport access vlan 400 ! interface Ethernet0/1 switchport access vlan 400 ! interface Ethernet0/2 switchport access vlan 420 ! interface Ethernet0/3 switchport access vlan 420 ! interface Ethernet0/4 switchport access vlan 450 ! interface Ethernet0/5 switchport access vlan 450 ! interface Ethernet0/6 switchport access vlan 500 ! interface Ethernet0/7 switchport access vlan 500 ! interface Vlan400 nameif outside security-level 0 ip address XX.XX.XX.10 255.255.255.248 ! interface Vlan420 nameif public security-level 20 ip address 192.168.20.1 255.255.255.0 ! interface Vlan450 nameif dmz security-level 50 ip address 192.168.10.1 255.255.255.0 ! interface Vlan500 nameif inside security-level 100 ip address 192.168.0.1 255.255.255.0 ! ftp mode passive clock timezone JST 9 same-security-traffic permit inter-interface same-security-traffic permit intra-interface object-group network DM_INLINE_NETWORK_1 network-object host XX.XX.XX.11 network-object host XX.XX.XX.13 object-group service ssh_2220 tcp port-object eq 2220 object-group service ssh_2251 tcp port-object eq 2251 object-group service ssh_2229 tcp port-object eq 2229 object-group service ssh_2210 tcp port-object eq 2210 object-group service DM_INLINE_TCP_1 tcp group-object ssh_2210 group-object ssh_2220 object-group service zabbix tcp port-object range 10050 10051 object-group service DM_INLINE_TCP_2 tcp port-object eq www group-object zabbix object-group protocol TCPUDP protocol-object udp protocol-object tcp object-group service http_8029 tcp port-object eq 8029 object-group network DM_INLINE_NETWORK_2 network-object host 192.168.20.10 network-object host 192.168.20.30 network-object host 192.168.20.60 object-group service imaps_993 tcp description Secure IMAP port-object eq 993 object-group service public_wifi_group description Service allowed on the Public Wifi Group. Allows Web and Email. service-object tcp-udp eq domain service-object tcp-udp eq www service-object tcp eq https service-object tcp-udp eq 993 service-object tcp eq imap4 service-object tcp eq 587 service-object tcp eq pop3 service-object tcp eq smtp access-list outside_access_in remark http traffic from outside access-list outside_access_in extended permit tcp any object-group DM_INLINE_NETWORK_1 eq www access-list outside_access_in remark ssh from outside to web1 access-list outside_access_in extended permit tcp any host XX.XX.XX.11 object-group ssh_2251 access-list outside_access_in remark ssh from outside to penguin access-list outside_access_in extended permit tcp any host XX.XX.XX.10 object-group ssh_2229 access-list outside_access_in remark http from outside to penguin access-list outside_access_in extended permit tcp any host XX.XX.XX.10 object-group http_8029 access-list outside_access_in remark ssh from outside to internal hosts access-list outside_access_in extended permit tcp any host XX.XX.XX.13 object-group DM_INLINE_TCP_1 access-list outside_access_in remark dns service to internal host access-list outside_access_in extended permit object-group TCPUDP any host XX.XX.XX.13 eq domain access-list dmz_access_in extended permit ip 192.168.10.0 255.255.255.0 any access-list dmz_access_in extended permit tcp any host 192.168.10.29 object-group DM_INLINE_TCP_2 access-list public_access_in remark Web access to DMZ websites access-list public_access_in extended permit object-group TCPUDP any object-group DM_INLINE_NETWORK_2 eq www access-list public_access_in remark General web access. (HTTP, DNS & ICMP and Email) access-list public_access_in extended permit object-group public_wifi_group any any pager lines 24 logging enable logging asdm informational mtu outside 1500 mtu public 1500 mtu dmz 1500 mtu inside 1500 no failover icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 60 global (outside) 1 interface global (dmz) 2 interface nat (public) 1 0.0.0.0 0.0.0.0 nat (dmz) 1 0.0.0.0 0.0.0.0 nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface 2229 192.168.0.29 2229 netmask 255.255.255.255 static (inside,outside) tcp interface 8029 192.168.0.29 www netmask 255.255.255.255 static (dmz,outside) XX.XX.XX.13 192.168.10.10 netmask 255.255.255.255 dns static (dmz,outside) XX.XX.XX.11 192.168.10.30 netmask 255.255.255.255 dns static (dmz,inside) 192.168.0.29 192.168.10.29 netmask 255.255.255.255 static (dmz,public) 192.168.20.30 192.168.10.30 netmask 255.255.255.255 dns static (dmz,public) 192.168.20.10 192.168.10.10 netmask 255.255.255.255 dns static (inside,dmz) 192.168.10.0 192.168.0.0 netmask 255.255.255.0 dns access-group outside_access_in in interface outside access-group public_access_in in interface public access-group dmz_access_in in interface dmz route outside 0.0.0.0 0.0.0.0 XX.XX.XX.9 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy http server enable http 192.168.0.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 telnet timeout 5 ssh 192.168.0.0 255.255.255.0 inside ssh timeout 20 console timeout 0 dhcpd dns 61.122.112.97 61.122.112.1 dhcpd auto_config outside ! dhcpd address 192.168.20.200-192.168.20.254 public dhcpd enable public ! dhcpd address 192.168.0.200-192.168.0.254 inside dhcpd enable inside ! threat-detection basic-threat threat-detection statistics host threat-detection statistics access-list no threat-detection statistics tcp-intercept ntp server 130.54.208.201 source public webvpn ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum client auto message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect ip-options inspect netbios inspect rsh inspect rtsp inspect skinny inspect esmtp inspect sqlnet inspect sunrpc inspect tftp inspect sip inspect xdmcp !

  Read the article

• KVM Slow performance on XP Guest

  - by Gregg Leventhal

  The system is very slow to do anything, even browse a local folder, and CPU sits at 100% frequently. Guest is XP 32 bit. Host is Scientific Linux 6.2, Libvirt 0.10, Guest XP OS shows ACPI Multiprocessor HAL and a virtIO driver for NIC and SCSI. Installed. CPUInfo on host: processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 42 model name : Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz stepping : 7 cpu MHz : 3200.000 cache size : 8192 KB physical id : 0 siblings : 8 core id : 0 cpu cores : 4 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx lahf_lm ida arat epb xsaveopt pln pts dts tpr_shadow vnmi flexpriority ept vpid bogomips : 6784.93 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: <memory unit='KiB'>4194304</memory> <currentMemory unit='KiB'>4194304</currentMemory> <vcpu placement='static' cpuset='0'>1</vcpu> <os> <type arch='x86_64' machine='rhel6.3.0'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <cpu mode='custom' match='exact'> <model fallback='allow'>SandyBridge</model> <vendor>Intel</vendor> <feature policy='require' name='vme'/> <feature policy='require' name='tm2'/> <feature policy='require' name='est'/> <feature policy='require' name='vmx'/> <feature policy='require' name='osxsave'/> <feature policy='require' name='smx'/> <feature policy='require' name='ss'/> <feature policy='require' name='ds'/> <feature policy='require' name='tsc-deadline'/> <feature policy='require' name='dtes64'/> <feature policy='require' name='ht'/> <feature policy='require' name='pbe'/> <feature policy='require' name='tm'/> <feature policy='require' name='pdcm'/> <feature policy='require' name='ds_cpl'/> <feature policy='require' name='xtpr'/> <feature policy='require' name='acpi'/> <feature policy='require' name='monitor'/> <feature policy='force' name='sse'/> <feature policy='force' name='sse2'/> <feature policy='force' name='sse4.1'/> <feature policy='force' name='sse4.2'/> <feature policy='force' name='ssse3'/> <feature policy='force' name='x2apic'/> </cpu> <clock offset='localtime'> <timer name='rtc' tickpolicy='catchup'/> </clock> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/libexec/qemu-kvm</emulator> <disk type='file' device='disk'> <driver name='qemu' type='qcow2' cache='none'/> <source file='/var/lib/libvirt/images/Server-10-9-13.qcow2'/> <target dev='vda' bus='virtio'/> <alias name='virtio-disk0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x08' function='0x0'/> </disk>

  Read the article

• Single-port 2600 router with 2900XL switch

  - by Slava Maslennikov

  I have a setup, where the single port 2600 router is in port 0/2 in the switch, outside network is on port 0/1, and the rest (0/3-0/24) should be clients for the second network that would be managed by the 2600 router. I configured everything with two VLANs: 100 for outside (0/2-0/24), 200 for inside (0/1-0/2). 0/2 is a trunk port for the two VLANs. The issue that came about is that I can't have two VLANs on at once: software doesn't allow it. Now, I can ping the outside network devices (172.16.7.1, 172.16.7.103), and even google (8.8.8.8) from the router, but not the switch. Devices on connected get a DHCP lease properly but can't ping outside the network, just the router - 172.17.7.1 and the switch itself, 172.17.7.7. The configuration for both the router and the switch are here, as well as below. Router: rt.throom#sho run Building configuration... Current configuration : 1015 bytes ! version 12.1 no service single-slot-reload-enable service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname rt.throom ! enable password To053cret ! ! ! ! ! no ip subnet-zero ip dhcp excluded-address 172.17.7.1 172.17.7.2 ip dhcp excluded-address 172.17.7.3 172.17.7.4 ip dhcp excluded-address 172.17.7.5 ! ip dhcp pool VLAN200 network 172.17.7.0 255.255.255.0 default-router 172.17.7.1 dns-server 8.8.8.8 ! ip audit notify log ip audit po max-events 100 ! ! ! ! ! ! ! interface Ethernet0/0 no ip address ! interface Ethernet0/0.100 encapsulation dot1Q 100 ip address 172.16.7.15 255.255.255.0 ip nat outside ! interface Ethernet0/0.200 encapsulation dot1Q 200 ip address 172.17.7.1 255.255.255.0 ip nat inside ! router eigrp 20 network 172.16.0.0 network 172.17.0.0 no auto-summary no eigrp log-neighbor-changes ! no ip classless no ip http server ! access-list 1 permit 172.17.7.0 0.0.0.255 ! ! line con 0 line aux 0 line vty 0 4 login ! end Switch: sw.throom#sho run Building configuration... Current configuration: ! version 11.2 no service pad no service udp-small-servers no service tcp-small-servers ! hostname sw.throom ! enable password Oh5053cret ! ! no spanning-tree vlan 100 no spanning-tree vlan 200 ip subnet-zero ! ! interface VLAN1 no ip address no ip route-cache ! interface FastEthernet0/1 switchport access vlan 100 spanning-tree portfast ! interface FastEthernet0/2 switchport trunk encapsulation dot1q switchport mode trunk ! interface FastEthernet0/3 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/4 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/5 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/6 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/7 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/8 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/9 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/10 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/11 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/12 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/13 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/14 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/15 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/16 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/17 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/18 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/19 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/20 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/21 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/22 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/23 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/24 switchport access vlan 200 spanning-tree portfast ! ! line con 0 stopbits 1 line vty 0 4 login line vty 5 9 login ! end sho ip route gives: Gateway of last resort is 172.16.7.1 to network 0.0.0.0 172.17.0.0/24 is subnetted, 1 subnets C 172.17.7.0 is directly connected, Ethernet0/0.200 172.16.0.0/24 is subnetted, 1 subnets C 172.16.7.0 is directly connected, Ethernet0/0.100 S* 0.0.0.0/0 [1/0] via 172.16.7.1

  Read the article

• Ubuntu, No wireless networks found after correctly installed madwifi

  - by Peter

  Hi, I just installed madwifi on my MSI laptop with an Atheros AR5001 wifi card & Lucid. As far as I can see and according to System - Administration - Hardware drivers the install was successful and the card + driver is up and running. However, I don't see any wireless network (my windows PC can see about 5 wireless networks). I tried it with the network manager applet as well as with wicd. If I try to connect to "Hidden Wireless Network" via nm-applet, it will start to connect for a while but is unable too (although I supply it with the correct WEP settings & key) So, I'm unable to use my wireless network. What am i doing wrong? Some information about my system: iwconfig lo no wireless extensions. eth0 no wireless extensions. wifi0 no wireless extensions. ath0 IEEE 802.11g ESSID:"" Mode:Managed Frequency:2.437 GHz Access Point: Not-Associated Bit Rate:0 kb/s Tx-Power:17 dBm Sensitivity=1/1 Retry:off RTS thr:off Fragment thr:off Power Management:off Link Quality=0/70 Signal level=-96 dBm Noise level=-96 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 pan0 no wireless extensions. ifconfig ath0 Link encap:Ethernet HWaddr 00:15:af:cf:e2:ca inet6 addr: fe80::215:afff:fecf:e2ca/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth0 Link encap:Ethernet HWaddr 00:21:85:4d:82:78 inet addr:192.168.2.101 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::221:85ff:fe4d:8278/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3800 errors:0 dropped:0 overruns:0 frame:0 TX packets:2944 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3940261 (3.9 MB) TX bytes:525218 (525.2 KB) Interrupt:27 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:12 errors:0 dropped:0 overruns:0 frame:0 TX packets:12 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:720 (720.0 B) TX bytes:720 (720.0 B) wifi0 Link encap:UNSPEC HWaddr 00-15-AF-CF-E2-CA-00-00-00-00-00-00-00-00-00-00 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:3497 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:280 RX bytes:0 (0.0 B) TX bytes:179947 (179.9 KB) Interrupt:16 lshw -C network *-network description: Wireless interface product: AR5001 Wireless Network Adapter vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:02:00.0 logical name: wifi0 version: 01 serial: 00:15:af:cf:e2:ca width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix bus_master cap_list logical ethernet physical wireless configuration: broadcast=yes driver=ath_pci latency=0 multicast=yes wireless=IEEE 802.11g resources: irq:16 memory:fd7f0000-fd7fffff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 01 serial: 00:21:85:4d:82:78 size: 100MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.2.101 latency=0 link=yes multicast=yes port=MII speed=100MB/s resources: irq:27 ioport:c800(size=256) memory:fe2ff000-fe2fffff memory:fe2c0000-fe2dffff(prefetchable) lspci 00:00.0 Host bridge: ATI Technologies Inc RS690 Host Bridge 00:01.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (Internal gfx) 00:04.0 PCI bridge: ATI Technologies Inc Device 7914 00:06.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 2) 00:07.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 3) 00:12.0 SATA controller: ATI Technologies Inc SB600 Non-Raid-5 SATA 00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0) 00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1) 00:13.2 USB Controller: ATI Technologies Inc SB600 USB (OHCI2) 00:13.3 USB Controller: ATI Technologies Inc SB600 USB (OHCI3) 00:13.4 USB Controller: ATI Technologies Inc SB600 USB (OHCI4) 00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller (EHCI) 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 14) 00:14.1 IDE interface: ATI Technologies Inc SB600 IDE 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) 00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:05.0 VGA compatible controller: ATI Technologies Inc RS690M [Radeon X1200 Series] 01:05.2 Audio device: ATI Technologies Inc Radeon X1200 Series Audio Controller 02:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01) 05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) 06:04.0 CardBus bridge: O2 Micro, Inc. OZ711MP1/MS1 MemoryCardBus Controller (rev 21) 06:04.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev 01) 06:04.3 Bridge: O2 Micro, Inc. Integrated MS/xD Controller (rev 01) 06:04.4 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02) less /proc/modules | grep ath ath_rate_sample 11476 1 - Live 0xf812b000 ath_pci 193197 0 - Live 0xf85c3000 wlan 222892 5 wlan_wep,wlan_scan_sta,ath_rate_sample,ath_pci, Live 0xf8537000 ath_hal 398604 3 ath_rate_sample,ath_pci, Live 0xf8480000 I've been at this for hours now, also tried ndiswrapper and ath5k drivers with no luck, and really could use some help. Cheers.

  Read the article

• Recently "exposed" to Clicksor

  - by I take Drukqs

  Previous information concerning my issue can be found here: Virus...? Tons of people talking. Not sure where else to ask. I heard the loud sounds and whatnot from one of the ads but nothing was harmed and other than having the life scared out of me nothing was immediately affected. Literally nothing has changed. I really don't know what to do. My PC seems fine and from what Malwarebytes and Spybot tells me none of my files have been infected with anything. If you need more information I will be glad to supply it. Thanks in advance. Malwarebytes quick and full scan: Clean. Spybot S&D scan: Clean. HijackThis log: Logfile of Trend Micro HijackThis v2.0.4 Scan saved at 5:23:33 PM, on 2/2/2011 Platform: Windows 7 (WinNT 6.00.3504) MSIE: Internet Explorer v8.00 (8.00.7600.16700) Boot mode: Normal Running processes: C:\Program Files (x86)\DeviceVM\Browser Configuration Utility\BCU.exe C:\Program Files (x86)\NEC Electronics\USB 3.0 Host Controller Driver\Application\nusb3mon.exe C:\Program Files (x86)\Common Files\InstallShield\UpdateService\issch.exe C:\Program Files (x86)\Common Files\Java\Java Update\jusched.exe C:\Program Files (x86)\Pidgin\pidgin.exe C:\Program Files (x86)\Steam\Steam.exe C:\Program Files (x86)\Mozilla Firefox\firefox.exe C:\Program Files (x86)\uTorrent\uTorrent.exe C:\Fraps\fraps.exe C:\Program Files (x86)\Mozilla Firefox\plugin-container.exe C:\Program Files (x86)\Trend Micro\HiJackThis\HiJackThis.exe R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Page = http://go.microsoft.com/fwlink/?LinkId=54896 R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = http://go.microsoft.com/fwlink/?LinkId=69157 R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://go.microsoft.com/fwlink/?LinkId=69157 R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Search_URL = http://go.microsoft.com/fwlink/?LinkId=54896 R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Search Page = http://go.microsoft.com/fwlink/?LinkId=54896 R0 - HKLM\Software\Microsoft\Internet Explorer\Main,Start Page = http://go.microsoft.com/fwlink/?LinkId=69157 R0 - HKLM\Software\Microsoft\Internet Explorer\Search,SearchAssistant = R0 - HKLM\Software\Microsoft\Internet Explorer\Search,CustomizeSearch = R0 - HKLM\Software\Microsoft\Internet Explorer\Main,Local Page = C:\Windows\SysWOW64\blank.htm R0 - HKCU\Software\Microsoft\Internet Explorer\Toolbar,LinksFolderName = R3 - URLSearchHook: SearchHook Class - {BC86E1AB-EDA5-4059-938F-CE307B0C6F0A} - C:\Program Files (x86)\DeviceVM\Browser Configuration Utility\AddressBarSearch.dll F2 - REG:system.ini: UserInit=userinit.exe O2 - BHO: AcroIEHelperStub - {18DF081C-E8AD-4283-A596-FA578C2EBDC3} - C:\Program Files (x86)\Common Files\Adobe\Acrobat\ActiveX\AcroIEHelperShim.dll O2 - BHO: Windows Live ID Sign-in Helper - {9030D464-4C02-4ABF-8ECC-5164760863C6} - C:\Program Files (x86)\Common Files\Microsoft Shared\Windows Live\WindowsLiveLogin.dll O2 - BHO: Java(tm) Plug-In 2 SSV Helper - {DBC80044-A445-435b-BC74-9C25C1C588A9} - C:\Program Files (x86)\Java\jre6\bin\jp2ssv.dll O4 - HKLM\..\Run: [BCU] "C:\Program Files (x86)\DeviceVM\Browser Configuration Utility\BCU.exe" O4 - HKLM\..\Run: [JMB36X IDE Setup] C:\Windows\RaidTool\xInsIDE.exe O4 - HKLM\..\Run: [NUSB3MON] "C:\Program Files (x86)\NEC Electronics\USB 3.0 Host Controller Driver\Application\nusb3mon.exe" O4 - HKLM\..\Run: [ISUSScheduler] "C:\Program Files (x86)\Common Files\InstallShield\UpdateService\issch.exe" -start O4 - HKLM\..\Run: [ISUSPM Startup] C:\PROGRA~2\COMMON~1\INSTAL~1\UPDATE~1\ISUSPM.exe -startup O4 - HKLM\..\Run: [Adobe Reader Speed Launcher] "C:\Program Files (x86)\Adobe\Reader 10.0\Reader\Reader_sl.exe" O4 - HKLM\..\Run: [Adobe ARM] "C:\Program Files (x86)\Common Files\Adobe\ARM\1.0\AdobeARM.exe" O4 - HKLM\..\Run: [SunJavaUpdateSched] "C:\Program Files (x86)\Common Files\Java\Java Update\jusched.exe" O4 - HKLM\..\RunOnce: [Malwarebytes' Anti-Malware] C:\Program Files (x86)\Malwarebytes' Anti-Malware\mbamgui.exe /install /silent O4 - HKCU\..\Run: [ISUSPM Startup] C:\PROGRA~2\COMMON~1\INSTAL~1\UPDATE~1\ISUSPM.exe -startup O4 - HKUS\S-1-5-19\..\Run: [Sidebar] %ProgramFiles%\Windows Sidebar\Sidebar.exe /autoRun (User 'LOCAL SERVICE') O4 - HKUS\S-1-5-19\..\RunOnce: [mctadmin] C:\Windows\System32\mctadmin.exe (User 'LOCAL SERVICE') O4 - HKUS\S-1-5-20\..\Run: [Sidebar] %ProgramFiles%\Windows Sidebar\Sidebar.exe /autoRun (User 'NETWORK SERVICE') O4 - HKUS\S-1-5-20\..\RunOnce: [mctadmin] C:\Windows\System32\mctadmin.exe (User 'NETWORK SERVICE') O10 - Unknown file in Winsock LSP: c:\program files (x86)\common files\microsoft shared\windows live\wlidnsp.dll O10 - Unknown file in Winsock LSP: c:\program files (x86)\common files\microsoft shared\windows live\wlidnsp.dll O23 - Service: @%SystemRoot%\system32\Alg.exe,-112 (ALG) - Unknown owner - C:\Windows\System32\alg.exe (file missing) O23 - Service: AppleChargerSrv - Unknown owner - C:\Windows\system32\AppleChargerSrv.exe (file missing) O23 - Service: Browser Configuration Utility Service (BCUService) - DeviceVM, Inc. - C:\Program Files (x86)\DeviceVM\Browser Configuration Utility\BCUService.exe O23 - Service: DES2 Service for Energy Saving. (DES2 Service) - Unknown owner - C:\Program Files (x86)\GIGABYTE\EnergySaver2\des2svr.exe O23 - Service: @%SystemRoot%\system32\efssvc.dll,-100 (EFS) - Unknown owner - C:\Windows\System32\lsass.exe (file missing) O23 - Service: @%systemroot%\system32\fxsresm.dll,-118 (Fax) - Unknown owner - C:\Windows\system32\fxssvc.exe (file missing) O23 - Service: InstallDriver Table Manager (IDriverT) - Macrovision Corporation - C:\Program Files (x86)\Common Files\InstallShield\Driver\11\Intel 32\IDriverT.exe O23 - Service: JMB36X - Unknown owner - C:\Windows\SysWOW64\XSrvSetup.exe O23 - Service: @keyiso.dll,-100 (KeyIso) - Unknown owner - C:\Windows\system32\lsass.exe (file missing) O23 - Service: @comres.dll,-2797 (MSDTC) - Unknown owner - C:\Windows\System32\msdtc.exe (file missing) O23 - Service: @%SystemRoot%\System32\netlogon.dll,-102 (Netlogon) - Unknown owner - C:\Windows\system32\lsass.exe (file missing) O23 - Service: NVIDIA Driver Helper Service (NVSvc) - Unknown owner - C:\Windows\system32\nvvsvc.exe (file missing) O23 - Service: @%systemroot%\system32\psbase.dll,-300 (ProtectedStorage) - Unknown owner - C:\Windows\system32\lsass.exe (file missing) O23 - Service: @%systemroot%\system32\Locator.exe,-2 (RpcLocator) - Unknown owner - C:\Windows\system32\locator.exe (file missing) O23 - Service: @%SystemRoot%\system32\samsrv.dll,-1 (SamSs) - Unknown owner - C:\Windows\system32\lsass.exe (file missing) O23 - Service: @%SystemRoot%\system32\snmptrap.exe,-3 (SNMPTRAP) - Unknown owner - C:\Windows\System32\snmptrap.exe (file missing) O23 - Service: @%systemroot%\system32\spoolsv.exe,-1 (Spooler) - Unknown owner - C:\Windows\System32\spoolsv.exe (file missing) O23 - Service: @%SystemRoot%\system32\sppsvc.exe,-101 (sppsvc) - Unknown owner - C:\Windows\system32\sppsvc.exe (file missing) O23 - Service: Steam Client Service - Valve Corporation - C:\Program Files (x86)\Common Files\Steam\SteamService.exe O23 - Service: NVIDIA Stereoscopic 3D Driver Service (Stereo Service) - NVIDIA Corporation - C:\Program Files (x86)\NVIDIA Corporation\3D Vision\nvSCPAPISvr.exe O23 - Service: @%SystemRoot%\system32\ui0detect.exe,-101 (UI0Detect) - Unknown owner - C:\Windows\system32\UI0Detect.exe (file missing) O23 - Service: @%SystemRoot%\system32\vaultsvc.dll,-1003 (VaultSvc) - Unknown owner - C:\Windows\system32\lsass.exe (file missing) O23 - Service: @%SystemRoot%\system32\vds.exe,-100 (vds) - Unknown owner - C:\Windows\System32\vds.exe (file missing) O23 - Service: @%systemroot%\system32\vssvc.exe,-102 (VSS) - Unknown owner - C:\Windows\system32\vssvc.exe (file missing) O23 - Service: @%SystemRoot%\system32\Wat\WatUX.exe,-601 (WatAdminSvc) - Unknown owner - C:\Windows\system32\Wat\WatAdminSvc.exe (file missing) O23 - Service: @%systemroot%\system32\wbengine.exe,-104 (wbengine) - Unknown owner - C:\Windows\system32\wbengine.exe (file missing) O23 - Service: @%Systemroot%\system32\wbem\wmiapsrv.exe,-110 (wmiApSrv) - Unknown owner - C:\Windows\system32\wbem\WmiApSrv.exe (file missing) O23 - Service: @%PROGRAMFILES%\Windows Media Player\wmpnetwk.exe,-101 (WMPNetworkSvc) - Unknown owner - C:\Program Files (x86)\Windows Media Player\wmpnetwk.exe (file missing) -- End of file - 7889 bytes

  Read the article

• problems mounting an external IDE drive via USB in ubuntu

  - by Roy Rico

  I am having a problem connecting a specific IDE drive to my linux box. It's an old drive which I just want to get about 3 GB of files off of. INFO I am trying to connect a 200GB IDE Maxtor Drive, internally and externally... externally: I am using an self powered USB IDE external drive enclosure which I have used to connect various drives, under ubuntu and windows, in the past. The other posts stated it coudl be a problem I think i may have formatted the /dev/sdc partition instead of /dev/sdc1 partition when i originally formatted the drive. internally: I only have one machine left that has an internal IDE interface, and it's got XP on it. I plugged this drive internally into this machine with windows XP and used the ext2/ext3 drivers to mount this drive, but some files have question marks (?) in the file names which is messing up my copy process in windows. I can't delete the files under windows. Ubuntu Linux will not install on my only remaining machine that has IDE controller. I have tried the suggestions in the questions below http://superuser.com/questions/88182/mount-an-external-drive-in-ubuntu http://superuser.com/questions/23210/ubuntu-fails-to-mount-usb-drive it looks like i can see the drive in /proc/partitions $ cat /proc/partitions major minor #blocks name 8 0 78125000 sda 8 1 74894998 sda1 8 2 1 sda2 8 5 3229033 sda5 8 16 199148544 sdb <-- could be my drive? but it's not listed under fdisk -l $ fdisk -l Disk /dev/sda: 80.0 GB, 80000000000 bytes 255 heads, 63 sectors/track, 9726 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xd0f4738c Device Boot Start End Blocks Id System /dev/sda1 * 1 9324 74894998+ 83 Linux /dev/sda2 9325 9726 3229065 5 Extended /dev/sda5 9325 9726 3229033+ 82 Linux swap / Solaris and here is my log of /var/log/messages. with a bunch of weird output, can someone let me know what that weird output is? Mar 3 19:49:40 mala kernel: [687455.112029] usb 1-7: new high speed USB device using ehci_hcd and address 3 Mar 3 19:49:41 mala kernel: [687455.248576] usb 1-7: configuration #1 chosen from 1 choice Mar 3 19:49:41 mala kernel: [687455.267450] Initializing USB Mass Storage driver... Mar 3 19:49:41 mala kernel: [687455.269180] scsi4 : SCSI emulation for USB Mass Storage devices Mar 3 19:49:41 mala kernel: [687455.269410] usbcore: registered new interface driver usb-storage Mar 3 19:49:41 mala kernel: [687455.269416] USB Mass Storage support registered. Mar 3 19:49:46 mala kernel: [687460.270917] scsi 4:0:0:0: Direct-Access Maxtor 6 Y200P0 YAR4 PQ: 0 ANSI: 2 Mar 3 19:49:46 mala kernel: [687460.271485] sd 4:0:0:0: Attached scsi generic sg2 type 0 Mar 3 19:49:46 mala kernel: [687460.278858] sd 4:0:0:0: [sdb] 398297088 512-byte logical blocks: (203 GB/189 GiB) Mar 3 19:49:46 mala kernel: [687460.280866] sd 4:0:0:0: [sdb] Write Protect is off Mar 3 19:50:16 mala kernel: [687460.283784] sdb: Mar 3 19:50:16 mala kernel: [687491.112020] usb 1-7: reset high speed USB device using ehci_hcd and address 3 Mar 3 19:50:47 mala kernel: [687522.120030] usb 1-7: reset high speed USB device using ehci_hcd and address 3 Mar 3 19:51:18 mala kernel: [687553.112034] usb 1-7: reset high speed USB device using ehci_hcd and address 3 Mar 3 19:51:49 mala kernel: [687584.116025] usb 1-7: reset high speed USB device using ehci_hcd and address 3 Mar 3 19:52:02 mala kernel: [687596.170632] type=1505 audit(1267671122.035:31): operation="profile_replace" pid=8426 name=/usr/lib/cups/backend/cups-pdf Mar 3 19:52:02 mala kernel: [687596.171551] type=1505 audit(1267671122.035:32): operation="profile_replace" pid=8426 name=/usr/sbin/cupsd Mar 3 19:52:06 mala kernel: [687600.908056] async/0 D c08145c0 0 7655 2 0x00000000 Mar 3 19:52:06 mala kernel: [687600.908062] e5601d38 00000046 e5774000 c08145c0 e4c2a848 c08145c0 d203973a 0002713d Mar 3 19:52:06 mala kernel: [687600.908072] c08145c0 c08145c0 e4c2a848 c08145c0 00000000 0002713d c08145c0 f0a98c00 Mar 3 19:52:06 mala kernel: [687600.908079] e4c2a5b0 c20125c0 00000002 e5601d80 e5601d44 c056f3be e5601d78 e5601d4c Mar 3 19:52:06 mala kernel: [687600.908087] Call Trace: Mar 3 19:52:06 mala kernel: [687600.908099] [<c056f3be>] io_schedule+0x1e/0x30 Mar 3 19:52:06 mala kernel: [687600.908107] [<c01b2cf5>] sync_page+0x35/0x40 Mar 3 19:52:06 mala kernel: [687600.908111] [<c056f8f7>] __wait_on_bit_lock+0x47/0x90 Mar 3 19:52:06 mala kernel: [687600.908115] [<c01b2cc0>] ? sync_page+0x0/0x40 Mar 3 19:52:06 mala kernel: [687600.908121] [<c020f390>] ? blkdev_readpage+0x0/0x20 Mar 3 19:52:06 mala kernel: [687600.908125] [<c01b2ca9>] __lock_page+0x79/0x80 Mar 3 19:52:06 mala kernel: [687600.908130] [<c015c130>] ? wake_bit_function+0x0/0x50 Mar 3 19:52:06 mala kernel: [687600.908135] [<c01b459f>] read_cache_page_async+0xbf/0xd0 Mar 3 19:52:06 mala kernel: [687600.908139] [<c01b45c2>] read_cache_page+0x12/0x60 Mar 3 19:52:06 mala kernel: [687600.908144] [<c0232dca>] read_dev_sector+0x3a/0x80 Mar 3 19:52:06 mala kernel: [687600.908148] [<c0233d3e>] adfspart_check_ICS+0x1e/0x160 Mar 3 19:52:06 mala kernel: [687600.908152] [<c023339f>] ? disk_name+0xaf/0xc0 Mar 3 19:52:06 mala kernel: [687600.908157] [<c0233d20>] ? adfspart_check_ICS+0x0/0x160 Mar 3 19:52:06 mala kernel: [687600.908161] [<c02334de>] check_partition+0x10e/0x180 Mar 3 19:52:06 mala kernel: [687600.908165] [<c02335f6>] rescan_partitions+0xa6/0x330 Mar 3 19:52:06 mala kernel: [687600.908171] [<c0312472>] ? kobject_get+0x12/0x20 Mar 3 19:52:06 mala kernel: [687600.908175] [<c0312472>] ? kobject_get+0x12/0x20 Mar 3 19:52:06 mala kernel: [687600.908180] [<c039fc43>] ? get_device+0x13/0x20 Mar 3 19:52:06 mala kernel: [687600.908185] [<c03c263f>] ? sd_open+0x5f/0x1b0 Mar 3 19:52:06 mala kernel: [687600.908189] [<c020fda0>] __blkdev_get+0x140/0x310 Mar 3 19:52:06 mala kernel: [687600.908194] [<c020f0ac>] ? bdget+0xec/0x100 Mar 3 19:52:06 mala kernel: [687600.908198] [<c020ff7a>] blkdev_get+0xa/0x10 Mar 3 19:52:06 mala kernel: [687600.908202] [<c0232f30>] register_disk+0x120/0x140 Mar 3 19:52:06 mala kernel: [687600.908207] [<c0308b4d>] ? blk_register_region+0x2d/0x40 Mar 3 19:52:06 mala kernel: [687600.908211] [<c03084f0>] ? exact_match+0x0/0x10 Mar 3 19:52:06 mala kernel: [687600.908216] [<c0308cf0>] add_disk+0x80/0x140 Mar 3 19:52:06 mala kernel: [687600.908221] [<c03084f0>] ? exact_match+0x0/0x10 Mar 3 19:52:06 mala kernel: [687600.908225] [<c0308860>] ? exact_lock+0x0/0x20 Mar 3 19:52:06 mala kernel: [687600.908230] [<c03c53df>] sd_probe_async+0xff/0x1c0

  Read the article

• My linux server takes more than an hour to boot. Suggestions?

  - by jamieb

  I am building a CentOS 5.4 system that boots off a compact flash card using a card reader that emulates an IDE drive. It literally takes about an hour to boot. The ultra-slow part occurs when Grub is loading the kernel. Once that's done, the rest of the boot process only takes about a minute to get to a login prompt. Does anyone have any suggestions? I suspect that it may have to do with UDMA. Everything IDE-related in my BIOS seems to checkout. The read performance hdparm is telling me 1.77 MB/s. Ouch! (But even at that rate, it still shouldn't take an hour to decompress and load the kernel) [root@server ~]# hdparm -tT /dev/hdc /dev/hdc: Timing cached reads: 2444 MB in 2.00 seconds = 1222.04 MB/sec Timing buffered disk reads: 6 MB in 3.39 seconds = 1.77 MB/sec Trying to enable DMA is a no-go though: [root@server ~]# hdparm -d1 /dev/hdc /dev/hdc: setting using_dma to 1 (on) HDIO_SET_DMA failed: Operation not permitted using_dma = 0 (off) Here's some command outputs that might help: System [root@server ~]# uname -a Linux server.localdomain 2.6.18-164.el5xen #1 SMP Thu Sep 3 04:47:32 EDT 2009 i686 i686 i386 GNU/Linux PCI info: [root@server ~]# lspci -v 00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02) Subsystem: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub Flags: bus master, fast devsel, latency 0 Capabilities: [e0] Vendor Specific Information 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) (prog-if 00 [VGA controller]) Subsystem: Intel Corporation 82945G/GZ Integrated Graphics Controller Flags: bus master, fast devsel, latency 0, IRQ 10 Memory at fdf00000 (32-bit, non-prefetchable) [size=512K] I/O ports at ff00 [size=8] Memory at d0000000 (32-bit, prefetchable) [size=256M] Memory at fdf80000 (32-bit, non-prefetchable) [size=256K] Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Capabilities: [d0] Power Management version 2 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 Flags: bus master, medium devsel, latency 0, IRQ 16 I/O ports at fe00 [size=32] 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 Flags: bus master, medium devsel, latency 0, IRQ 17 I/O ports at fd00 [size=32] 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 Flags: bus master, medium devsel, latency 0, IRQ 18 I/O ports at fc00 [size=32] 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 Flags: bus master, medium devsel, latency 0, IRQ 19 I/O ports at fb00 [size=32] 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller Flags: bus master, medium devsel, latency 0, IRQ 16 Memory at fdfff000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01 [Subtractive decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: 00000000fdd00000-00000000fdd00000 Capabilities: [50] #0d [0000] 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) Subsystem: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge Flags: bus master, medium devsel, latency 0 Capabilities: [e0] Vendor Specific Information 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01) (prog-if 80 [Master]) Subsystem: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 17 I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at f800 [size=16] Capabilities: [70] Power Management version 2 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) Subsystem: Intel Corporation 82801G (ICH7 Family) SMBus Controller Flags: medium devsel, IRQ 17 I/O ports at 0500 [size=32] 01:04.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ Flags: bus master, medium devsel, latency 32, IRQ 18 I/O ports at de00 [size=256] Memory at fdeff000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 01:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ Flags: bus master, medium devsel, latency 32, IRQ 17 I/O ports at dc00 [size=256] Memory at fdefe000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 01:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ Flags: bus master, medium devsel, latency 32, IRQ 19 I/O ports at da00 [size=256] Memory at fdefd000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 hdparm ouput: [root@server ~]# hdparm /dev/hdc /dev/hdc: multcount = 0 (off) IO_support = 0 (default 16-bit) unmaskirq = 0 (off) using_dma = 0 (off) keepsettings = 0 (off) readonly = 0 (off) readahead = 256 (on) geometry = 8146/16/63, sectors = 8211168, start = 0 [root@server ~]# hdparm -I /dev/hdc /dev/hdc: ATA device, with non-removable media Model Number: InnoDisk Corp. - iCF4000 4GB Serial Number: 20091023AACA70000753 Firmware Revision: 081107 Standards: Supported: 5 Likely used: 6 Configuration: Logical max current cylinders 8146 8146 heads 16 16 sectors/track 63 63 -- CHS current addressable sectors: 8211168 LBA user addressable sectors: 8211168 device size with M = 1024*1024: 4009 MBytes device size with M = 1000*1000: 4204 MBytes (4 GB) Capabilities: LBA, IORDY(can be disabled) Standby timer values: spec'd by Vendor R/W multiple sector transfer: Max = 2 Current = 2 DMA: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=120ns IORDY flow control=120ns Commands/features: Enabled Supported: * Power Management feature set * WRITE_BUFFER command * READ_BUFFER command * NOP cmd * CFA feature set * Mandatory FLUSH_CACHE HW reset results: CBLID- above Vih Device num = 0 CFA power mode 1: enabled and required by some commands Maximum current = 100ma Checksum: correct

  Read the article

• KVM Guest installed from console. But how to get to the guest's console?

  - by badbishop

  I'm trying to install a fully virtualized guest (Fedora 14 x86_64) on KVM (RHEL 6), using command-line only (both hypervisor and guest). It goes without errors, and without a tangible result . I'd like to know how to do a text-only installation. So, here's what I've done: # virt-install \ --name=FE --ram=756 --vcpus=1 \ --file=/var/lib/libvirt/images/FE.img --network bridge:br0 \ --nographics --os-type=linux \ --extra-args='console=tty0' -v \ --cdrom=/media/usb/Fedora-14-x86_64-Live-Desktop.iso Starting install... Creating domain... | 0 B 00:00 Connected to domain FE Escape character is ^] ÿ Now what? As I understand after googling for a couple of days, I should see the guest's output from the text installation, but nothing happens. virt-viewer cannot connect to it, kindly suggesting that I explore all the options by adding --help (which I did). If I reconnect with virsh, I see this: Domain installation still in progress. You can reconnect to the console to complete the installation process. [root@v ~] # virsh console FEConnected to domain FE Escape character is ^] This shows that VM is running # virsh list Id Name State ---------------------------------- 8 FE running Qemu log: LC_ALL=C PATH=/sbin:/usr/sbin:/bin:/usr/bin /usr/libexec/qemu-kvm -S -M rhel6.0.0 -enable-kvm -m 756 -smp 1,sockets=1,cores=1,threads=1 -name FE -uuid 6989d008-7c89-424c-d2d3-f41235c57a18 -nographic -nodefconfig -nodefaults -chardev socket,id=monitor,path=/var/lib/libvirt/qemu/FE.monitor,server,nowait -mon chardev=monitor,mode=control -rtc base=utc -no-reboot -boot d -drive file=/var/lib/libvirt/images/FE.img,if=none,id=drive-ide0-0-0,format=raw,cache=none -device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0 -drive file=/media/usb/Fedora-14-x86_64-Live-Desktop.iso,if=none,media=cdrom,id=drive-ide0-1-0,readonly=on,format=raw -device ide-drive,bus=ide.1,unit=0,drive=drive-ide0-1-0,id=ide0-1-0 -netdev tap,fd=20,id=hostnet0 -device rtl8139,netdev=hostnet0,id=net0,mac=52:54:00:0a:65:8d,bus=pci.0,addr=0x2 -chardev pty,id=serial0 -device isa-serial,chardev=serial0 -usb -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3 char device redirected to /dev/pts/1 Output of /etc/libvirt/qemu/FE.xml # cat /etc/libvirt/qemu/FE.xml <domain type='kvm'> <name>FE</name> <uuid>6989d008-7c89-424c-d2d3-f41235c57a18</uuid> <memory>774144</memory> <currentMemory>774144</currentMemory> <vcpu>1</vcpu> <os> <type arch='x86_64' machine='rhel6.0.0'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/libexec/qemu-kvm</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw' cache='none'/> <source file='/var/lib/libvirt/images/FE.img'/> <target dev='hda' bus='ide'/> <address type='drive' controller='0' bus='0' unit='0'/> </disk> <disk type='block' device='cdrom'> <driver name='qemu' type='raw'/> <target dev='hdc' bus='ide'/> <readonly/> <address type='drive' controller='0' bus='1' unit='0'/> </disk> <controller type='ide' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <interface type='bridge'> <mac address='52:54:00:0a:65:8d'/> <source bridge='br0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </interface> <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target port='0'/> </console> <memballoon model='virtio'> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </memballoon> </devices> </domain> I'm obviously missing something that many others don't, but what is it? Thanx in advance!

  Read the article

• Windows installation repair option not showing up

  - by Carl

  I'm trying to repair an existing Windows XP installation. Following the instructions from http://www.microsoft.com/windowsxp/using/helpandsupport/learnmore/tips/doug92.mspx this should work: When the Press any key to boot from CD message is displayed on your screen, press a key to start your computer from the Windows XP CD. Press ENTER when you see the message To setup Windows XP now, and then press ENTER displayed on the Welcome to Setup screen. Do not choose the option to press R to use the Recovery Console. In the Windows XP Licensing Agreement, press F8 to agree to the license agreement. Make sure that your current installation of Windows XP is selected in the box, and then press R to repair Windows XP. Follow the instructions on the screen to complete Setup. On step 5 pressing R does nothing and there is nothing on the screen saying it would. When I just select to install I get a message that a previous installation is there and proceeding will destroy it and installed applications, I can optionally select a directory other than c:\windows, and I can optionally format before continuing. I had tried to go from SP2-SP3. It failed, and then I couldn't get to Safe Mode. I put the SP1 disk back in to do a repair, and I don't see that option. (I don't have an SP2 boot/install disk, I just have the non-boot upgrade package.) UPDATE: Upon loading the Recovery Console, I get a message saying The system registry does not appear to have an active ControlSet key. The system registry may be damaged. You can try restarting it with the Last Known Good configuration or you can try repairing the installation of Windows using the setup program's repair and recovery options. I then did bootcfg /scan - "successful" ... Total installs: 1 ... [1] c:\windows - with the c:\windows command prompt below it. bootcfg /list gives [1] Windows XP Pro; OS Load Options /noexecute=optin /fastdetect; OS Location: c:\windows I followed the instructions at http://michaelstevenstech.com/XPrepairinstall.htm - "Warning 2" link copy E:\i386\ntldr C:\ copy E:\i386\ntdetect.com C:\ attrib -h -r -s C:\boot.ini del C:\boot.ini BootCfg /Rebuild I added /fastdetect when it asked for options. I re-ran Windows setup - no change - no repair option. UPDATE: I followed the procedure at http://support.microsoft.com/default.aspx?scid=kb;en-us;307545 I rebooted. I now get a quick message on bootup to select the boot - 1: [blank] ; Windows XP Professional ; Windows Recover Console. The "1: " is new. The rest is the way it was when all was okay. Selecting 1: and the next one gives the same result - I get to a login icon, and then it asks for a password, with the blinking cursor, but I can't type anything. I reboot with the Windows CD. Now I see a repair option for installation "1: " I selected R on that, and it did "Setup is copying files..." and rebooted when it was done. Then it booted, and I got a window saying "Setup will complete in approximately 39 minutes." That's where I am now. I wasn't expecting this last part - I did a repair several months ago and I don't recall that. UPDATE: Booted up. Asked if I wanted to register Windows online. All my icons are there, and the old desktop documents. Good. All the applications I tried from the Start Menu work (tested a few), except Corel Photopaint - I get registry entry not found errors. Windows ran for a while, then froze. The mouse and keyboard don't work. Pressing the power button got Windows to shut down. I probably need to put SP2 on it, and then all the updates for my laptop for XP Pro SP2 (drivers), there's a bunch. The mouse and keyboard quit working again. That wasn't a problem when I first set up this laptop. I've ran 4 times now. Two mouse/keyboards hangs by pressing Ctrl-C (to copy text from a notepad document), and two by selecting Start-Run (wasn't able to type anything in the box).

  Read the article

• php5.4 + freebsd8.3+nginx can't get errors

  - by Alexey Perepechko

  I have a confusing behaviour. I can't get any error into log file or screen. I made a file index.php with content like this: "<?php a();".Normally, I will get message like this: "Call to undefined function a()" but when I called this script on my configuration I got nothing. Only white screen and empty logs. I checked all rights. I turned on all possible log file. Nothing. Please help me. My configuration is: freebsd 8.3-RELEASE PHP 5.4.7 (fpm-fcgi) nginx version: nginx/1.2.4 FPM-config [global] pid = run/php-fpm.pid error_log = log/php-fpm.log log_level = notice emergency_restart_threshold = 5 emergency_restart_interval = 2 process_control_timeout = 2 daemonize = yes events.mechanism = kqueue [puser] listen = /usr/local/www/host/tmp/php-fpm.sock; listen.backlog = -1 listen.allowed_clients = 127.0.0.1 listen.owner = puser listen.group = puser listen.mode = 0666 user = puser group = puser pm = dynamic pm.max_children = 30 pm.start_servers = 2 pm.min_spare_servers = 2 pm.max_spare_servers = 5 pm.max_requests = 50 slowlog = /usr/local/www/host/logs/fpm.log.slow request_slowlog_timeout = 1s rlimit_files = 1024 rlimit_core = 0 chroot = /usr/local/www/host/ catch_workers_output = yes env[HOSTNAME] = $HOSTNAME env[TMP] = /tmp env[TMPDIR] = /tmp env[TEMP] = /tmp php_admin_value[upload_tmp_dir] = /tmp php_admin_value[cgi.fix_pathinfo] = 0 php_admin_value[date.timezone]= 'Europe/Moscow' php_admin_value[memory_limit] = 320m php_admin_value[max_execution_time] = 180 php_admin_flag[log_errors] = on php_admin_value[error_log] = /logs/fpm-err.log php_admin_value[error_reporting] = 'E_ALL & ~E_NOTICE' php_admin_value[display_errors] = on php_admin_flag[display_startup_errors] = on NGINX config user www; worker_processes 2; worker_rlimit_nofile 80000; error_log /var/log/nginx_error.log notice; #pid logs/nginx.pid; events { worker_connections 2048; use kqueue; } http { server_tokens off; client_max_body_size 4m; include mime.types; default_type application/octet-stream; charset utf-8; sendfile on; keepalive_timeout 65; tcp_nopush on; tcp_nodelay on; log_format IP .$remote_addr.; log_format main '$remote_addr - $remote_user [$time_local] $request $request_body ' '"$status" $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; reset_timedout_connection on; server { listen 80; server_name www.example.com; access_log /usr/local/www/host/logs/access.log main; error_log /usr/local/www/host/logs/error.log error; error_page 500 502 503 504 /errors/50x.html; error_page 404 /errors/404.html; root /usr/local/www/host/htdocs; index index.php index.html index.htm; location / { index index.html index.php; try_files $uri /index.php?$args; } location ~ \.php$ { fastcgi_split_path_info ^(.+\.php)(.*)$; fastcgi_intercept_errors on; fastcgi_pass unix:/usr/local/www/host/tmp/php-fpm.sock; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /htdocs$fastcgi_script_name; fastcgi_param PATH_INFO $fastcgi_path_info; fastcgi_param PATH_TRANSLATED /htdocs$fastcgi_script_name; include /usr/local/etc/nginx/fastcgi_params; } } } PHP config (php.ini) [PHP] engine = On short_open_tag = On asp_tags = Off precision = 14 y2k_compliance = On output_buffering = 4096 zlib.output_compression = Off implicit_flush = Off unserialize_callback_func = serialize_precision = 100 allow_call_time_pass_reference = Off safe_mode = Off safe_mode_gid = Off safe_mode_include_dir = safe_mode_exec_dir = safe_mode_allowed_env_vars = PHP_ safe_mode_protected_env_vars = LD_LIBRARY_PATH disable_functions = dl,system,exec,passthru,shell_exec disable_classes = expose_php = On max_execution_time = 30 max_input_time = 60 memory_limit = 128M error_reporting = E_ALL display_errors = On display_startup_errors = On log_errors = On log_errors_max_len = 1024 ignore_repeated_errors = Off ignore_repeated_source = Off report_memleaks = On track_errors = On error_log = /var/log/php-fpm-error.log variables_order = "GPCS" request_order = "GP" register_globals = Off register_long_arrays = Off register_argc_argv = Off auto_globals_jit = On post_max_size = 8M magic_quotes_gpc = Off magic_quotes_runtime = Off magic_quotes_sybase = Off auto_prepend_file = auto_append_file = default_mimetype = "text/html" doc_root = user_dir = enable_dl = Off file_uploads = On upload_max_filesize = 2M max_file_uploads = 20 allow_url_fopen = On allow_url_include = Off default_socket_timeout = 60 [Date] date.timezone = Europe/Moscow [filter] [iconv] [intl] [sqlite] [sqlite3] [Pcre] [Pdo] [Pdo_mysql] [Phar] [Syslog] define_syslog_variables = Off [mail function] SMTP = localhost smtp_port = 25 mail.add_x_header = On [SQL] sql.safe_mode = Off [ODBC] odbc.allow_persistent = On odbc.check_persistent = On odbc.max_persistent = -1 odbc.max_links = -1 odbc.defaultlrl = 4096 odbc.defaultbinmode = 1 [Interbase] [MySQL] mysql.allow_local_infile = On mysql.allow_persistent = On mysql.cache_size = 2000 mysql.max_persistent = -1 mysql.max_links = -1 mysql.default_port = mysql.default_socket = mysql.default_host = mysql.default_user = mysql.default_password = mysql.connect_timeout = 60 mysql.trace_mode = Off [MySQLi] mysqli.max_persistent = -1 mysqli.allow_persistent = On mysqli.max_links = -1 mysqli.cache_size = 2000 mysqli.default_port = 3306 mysqli.default_socket = mysqli.default_host = mysqli.default_user = mysqli.default_pw = mysqli.reconnect = Off [mysqlnd] mysqlnd.collect_statistics = On mysqlnd.collect_memory_statistics = Off [OCI8] [PostgresSQL] pgsql.allow_persistent = On pgsql.auto_reset_persistent = Off pgsql.max_persistent = -1 pgsql.max_links = -1 pgsql.ignore_notice = 0 pgsql.log_notice = 0 [Sybase-CT] sybct.allow_persistent = On sybct.max_persistent = -1 sybct.max_links = -1 sybct.min_server_severity = 10 sybct.min_client_severity = 10 [bcmath] bcmath.scale = 0 [browscap] [Session] session.save_handler = files session.use_cookies = 1 session.use_only_cookies = 1 session.name = PHPSESSID session.auto_start = 0 session.cookie_lifetime = 0 session.cookie_path = / session.cookie_domain = session.cookie_httponly = session.serialize_handler = php session.gc_probability = 1 session.gc_divisor = 1000 session.gc_maxlifetime = 1440 session.bug_compat_42 = Off session.bug_compat_warn = Off session.referer_check = session.entropy_length = 0 session.cache_limiter = nocache session.cache_expire = 180 session.use_trans_sid = 0 session.hash_function = 0 session.hash_bits_per_character = 5 url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry" [MSSQL] mssql.allow_persistent = On mssql.max_persistent = -1 mssql.max_links = -1 mssql.min_error_severity = 10 mssql.min_message_severity = 10 mssql.compatability_mode = Off mssql.secure_connection = Off [Assertion] [COM] [mbstring] [gd] [exif] [Tidy] tidy.clean_output = Off [soap] soap.wsdl_cache_enabled=1 soap.wsdl_cache_dir="/tmp" soap.wsdl_cache_ttl=86400 soap.wsdl_cache_limit = 5 [sysvshm] [ldap] ldap.max_links = -1 [mcrypt] [dba] I need to get errors on display and detailed record in the error.log.

  Read the article

• Install VLC 2.0.7 in CentOS 6.4?

  - by raaz

  I am keep failing in the installation process I have tried. I have started process as follows. yum install gcc dbus-glib-devel* lua-devel* libcddb wget http://download.videolan.org/pub/videolan/vlc/2.0.7/vlc-2.0.7.tar.xz tar -xf vlc-2.0.7.tar.xz && cd vlc-2.0.7 ./configure in the configure I am getting the error as follows configure: WARNING: No package 'libcddb' found: CDDB access disabled. checking for Linux DVB version 5... yes checking for DVBPSI... no checking gme/gme.h usability... no checking gme/gme.h presence... no checking for gme/gme.h... no checking for SID... no configure: WARNING: No package 'libsidplay2' found (required for sid). checking for OGG... no configure: WARNING: Library ogg >= 1.0 needed for ogg was not found checking for MUX_OGG... no configure: WARNING: Library ogg >= 1.0 needed for mux_ogg was not found checking for SHOUT... no configure: WARNING: Library shout >= 2.1 needed for shout was not found checking ebml/EbmlVersion.h usability... no checking ebml/EbmlVersion.h presence... no checking for ebml/EbmlVersion.h... no checking for LIBMODPLUG... no configure: WARNING: No package 'libmodplug' found No package 'libmodplug' found. checking mpc/mpcdec.h usability... no checking mpc/mpcdec.h presence... no checking for mpc/mpcdec.h... no checking mpcdec/mpcdec.h usability... no checking mpcdec/mpcdec.h presence... no checking for mpcdec/mpcdec.h... no checking for libcrystalhd/libcrystalhd_if.h... no checking mad.h usability... no checking mad.h presence... no checking for mad.h... no configure: error: Could not find libmad on your system: you may get it from http://www.underbit.com/products/mad/. Alternatively you can use --disable-mad to disable the mad plugin. [root@localhost vlc-2.0.7]# So I went to libmad http location and downloaded it and while doing make it gave me the errors.There are no errors at ./configure with libmad but make not going through. [root@localhost libmad-0.15.0b]# make (sed -e '1s|.*|/*|' -e '1b' -e '$s|.*| */|' -e '$b' \ -e 's/^.*/ *&/' ./COPYRIGHT; echo; \ echo "# ifdef __cplusplus"; \ echo 'extern "C" {'; \ echo "# endif"; echo; \ if [ ".-DFPM_INTEL" != "." ]; then \ echo ".-DFPM_INTEL" | sed -e 's|^\.-D|# define |'; echo; \ fi; \ sed -ne 's/^# *define *\(HAVE_.*_ASM\).*/# define \1/p' \ config.h; echo; \ sed -ne 's/^# *define *OPT_\(SPEED\|ACCURACY\).*/# define OPT_\1/p' \ config.h; echo; \ sed -ne 's/^# *define *\(SIZEOF_.*\)/# define \1/p' \ config.h; echo; \ for header in version.h fixed.h bit.h timer.h stream.h frame.h synth.h decoder.h; do \ echo; \ sed -n -f ./mad.h.sed ./$header; \ done; echo; \ echo "# ifdef __cplusplus"; \ echo '}'; \ echo "# endif") >mad.h make all-recursive make[1]: Entering directory `/home/raja/Downloads/libmad-0.15.0b' make[2]: Entering directory `/home/raja/Downloads/libmad-0.15.0b' if /bin/sh ./libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I. -DFPM_INTEL -DASO_ZEROCHECK -Wall -march=i486 -g -O -fforce-mem -fforce-addr -fthread-jumps -fcse-follow-jumps -fcse-skip-blocks -fexpensive-optimizations -fregmove -fschedule-insns2 -fstrength-reduce -MT version.lo -MD -MP -MF ".deps/version.Tpo" \ -c -o version.lo `test -f 'version.c' || echo './'`version.c; \ then mv -f ".deps/version.Tpo" ".deps/version.Plo"; \ else rm -f ".deps/version.Tpo"; exit 1; \ fi mkdir .libs gcc -DHAVE_CONFIG_H -I. -I. -I. -DFPM_INTEL -DASO_ZEROCHECK -Wall -march=i486 -g -O -fforce-mem -fforce-addr -fthread-jumps -fcse-follow-jumps -fcse-skip-blocks -fexpensive-optimizations -fregmove -fschedule-insns2 -fstrength-reduce -MT version.lo -MD -MP -MF .deps/version.Tpo -c version.c -fPIC -DPIC -o .libs/version.lo cc1: error: unrecognized command line option "-fforce-mem" make[2]: *** [version.lo] Error 1 make[2]: Leaving directory `/home/raja/Downloads/libmad-0.15.0b' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/raja/Downloads/libmad-0.15.0b' make: *** [all] Error 2 how can i resolve the issue and install VLC in my Centos ? I am using CentOS 6.4 . Thank you.

  Read the article

• Connecting a LAN to an OpenVPN server via a windows 7 client gateway

  - by user705142

  I've got OpenVPN set up between my windows 7 client and linux server. The goal is that I'll get secure access to a webapp running on the server from any computer on the client LAN. I'm using ccd to assign static ip addresses to each client connection, with key authentication. It's working on my client machine (10.83.41.9), and when you go to the gateway IP address (10.83.41.1), it loads up the webapp. Now I really need the other computers on the client LAN to be able to connect to the webapp as well, via the windows machine. The client has a static IP address of 192.168.2.100 on the LAN, and I've enabled IP forwarding in windows (confirmed by ipconfig /all). In my router I've forwarded 10.83.41.1 / 255.255.255.255 to 192.168.2.100. In server.conf I have.. route 192.168.2.0 255.255.255.0 And in the office ccd.. ifconfig-push 10.83.41.9 10.83.41.10 iroute 192.168.2.0 255.255.255.0 The client log is as follows: Thu Mar 15 20:19:56 2012 OpenVPN 2.2.2 Win32-MSVC++ [SSL] [LZO2] [PKCS11] built on Dec 15 2011 Thu Mar 15 20:19:56 2012 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables Thu Mar 15 20:19:56 2012 Control Channel Authentication: using 'ta.key' as a OpenVPN static key file Thu Mar 15 20:19:56 2012 Outgoing Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication Thu Mar 15 20:19:56 2012 Incoming Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication Thu Mar 15 20:19:56 2012 LZO compression initialized Thu Mar 15 20:19:56 2012 Control Channel MTU parms [ L:1558 D:166 EF:66 EB:0 ET:0 EL:0 ] Thu Mar 15 20:19:56 2012 Socket Buffers: R=[8192->8192] S=[64512->64512] Thu Mar 15 20:19:56 2012 Data Channel MTU parms [ L:1558 D:1450 EF:58 EB:135 ET:0 EL:0 AF:3/1 ] Thu Mar 15 20:19:56 2012 Local Options hash (VER=V4): '9e7066d2' Thu Mar 15 20:19:56 2012 Expected Remote Options hash (VER=V4): '162b04de' Thu Mar 15 20:19:56 2012 UDPv4 link local: [undef] Thu Mar 15 20:19:56 2012 UDPv4 link remote: 111.65.224.202:1194 Thu Mar 15 20:19:56 2012 TLS: Initial packet from 111.65.224.202:1194, sid=ceb04c22 8cc6d151 Thu Mar 15 20:19:56 2012 VERIFY OK: depth=1, /C=NZ/O=XXX./CN=XXX Thu Mar 15 20:19:56 2012 VERIFY OK: nsCertType=SERVER Thu Mar 15 20:19:56 2012 VERIFY OK: depth=0, /C=NZ/O=XXX./CN=XXX Thu Mar 15 20:19:56 2012 Replay-window backtrack occurred [1] Thu Mar 15 20:19:56 2012 Data Channel Encrypt: Cipher 'AES-256-CBC' initialized with 256 bit key Thu Mar 15 20:19:56 2012 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Thu Mar 15 20:19:56 2012 Data Channel Decrypt: Cipher 'AES-256-CBC' initialized with 256 bit key Thu Mar 15 20:19:56 2012 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Thu Mar 15 20:19:56 2012 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Thu Mar 15 20:19:56 2012 [server] Peer Connection Initiated with 111.65.224.202:1194 Thu Mar 15 20:19:58 2012 SENT CONTROL [server]: 'PUSH_REQUEST' (status=1) Thu Mar 15 20:19:59 2012 PUSH: Received control message: 'PUSH_REPLY,route 10.83.41.1,topology net30,ping 10,ping-restart 120,ifconfig 10.83.41.9 10.83.41.10' Thu Mar 15 20:19:59 2012 OPTIONS IMPORT: timers and/or timeouts modified Thu Mar 15 20:19:59 2012 OPTIONS IMPORT: --ifconfig/up options modified Thu Mar 15 20:19:59 2012 OPTIONS IMPORT: route options modified Thu Mar 15 20:19:59 2012 ROUTE default_gateway=192.168.2.1 Thu Mar 15 20:19:59 2012 TAP-WIN32 device [OpenVPN] opened: \\.\Global\{B32D85C9-1942-42E2-80BA-7E0B5BB5185F}.tap Thu Mar 15 20:19:59 2012 TAP-Win32 Driver Version 9.9 Thu Mar 15 20:19:59 2012 TAP-Win32 MTU=1500 Thu Mar 15 20:19:59 2012 Notified TAP-Win32 driver to set a DHCP IP/netmask of 10.83.41.9/255.255.255.252 on interface {B32D85C9-1942-42E2-80BA-7E0B5BB5185F} [DHCP-serv: 10.83.41.10, lease-time: 31536000] Thu Mar 15 20:19:59 2012 Successful ARP Flush on interface [45] {B32D85C9-1942-42E2-80BA-7E0B5BB5185F} Thu Mar 15 20:20:04 2012 TEST ROUTES: 1/1 succeeded len=1 ret=1 a=0 u/d=up Thu Mar 15 20:20:04 2012 C:\WINDOWS\system32\route.exe ADD 10.83.41.1 MASK 255.255.255.255 10.83.41.10 Thu Mar 15 20:20:04 2012 ROUTE: CreateIpForwardEntry succeeded with dwForwardMetric1=30 and dwForwardType=4 Thu Mar 15 20:20:04 2012 Route addition via IPAPI succeeded [adaptive] Thu Mar 15 20:20:04 2012 Initialization Sequence Completed From the other machines I can ping 192.169.2.100, but not 10.83.41.1. In the how-to, it mentions "Make sure your network interface is in promiscuous mode." as well. I can't find in the windows network config, so this may or may not be part of it. Ideally this would be achieved without any special configuration the other LAN computers. Not sure how far I'm going to get on my own at this point, any ideas? Is there something I'm missing, or anything I should need to know?

  Read the article

• Mount TMPFS instead of ro /dev

  - by schiggn

  I am working on a ARM-Based embedded system with a custom Debian Linux based on kernel 2.6.31. In the final system, the Root file system is stored as squashfs on flash. Now, the folder /dev is created by udev, but since there is no hot plugging functionality needed and booting time is critical, I wanted to delete udev and "hard code" the /dev folder (read here, page 5). because i still need to change parameters of the devices (with ioctl /sysfs) this does not work for me in this case. so i thought of mounting a tmpfs on /dev and change the parameters there. is this possible? and how to do best? my approach would be: delete /dev from RFS create tar containing basic devices mount tmpfs /dev untar tar-file into /dev change parameters Could this work? Do you see any problems? I found out, that you can mount on top of already mounted mount point, is it somehow possible just to take data with while mounting the new file system? if so that would be very convenient! Thanks Update: I just tried that out, but I'm stuck at a certain point. I packed all my devices into devices.tar, packed it into /usr of my squashfs and added the following lines to mountkernfs.sh, which is executed right after INIT. #mount /dev on tmpfs echo -n "Mounting /dev on tmpfs..." mount -o size=5M,mode=0755 -t tmpfs tmpfs /dev mknod -m 600 /dev/console c 5 1 mknod -m 600 /dev/null c 1 3 echo "done." echo -n "Populating /dev..." tar -xf /usr/devices.tar -C /dev echo "done." This works fine on the version over NFS, if I place printf's in the code, I can see it executing, if I comment out the extracting part, its complaining about missing devices. Booting OK mmc0: new high speed SDHC card at address 0007 mmcblk0: mmc0:0007 SD04G 3.67 GiB mmcblk0: p1 IP-Config: Unable to set interface netmask (-22). Looking up port of RPC 100003/2 on 192.168.1.234 Looking up port of RPC 100005/1 on 192.168.1.234 VFS: Mounted root (nfs filesystem) on device 0:14. Freeing init memory: 136K INIT: version 2.86 booting Mounting /dev on tmpfs...done. Populating /dev...done. Initializing /var...done. Setting the system clock. System Clock set to: Thu Sep 13 11:26:23 UTC 2012. INIT: Entering runlevel: 2 UBI: attaching mtd8 to ubi0 Commenting out the extraction of the tar mmc0: new high speed SDHC card at address 0007 mmcblk0: mmc0:0007 SD04G 3.67 GiB mmcblk0: p1 IP-Config: Unable to set interface netmask (-22). Looking up port of RPC 100003/2 on 192.168.1.234 Looking up port of RPC 100005/1 on 192.168.1.234 VFS: Mounted root (nfs filesystem) on device 0:14. Freeing init memory: 136K INIT: version 2.86 booting Mounting /dev on tmpfs...done. Populating /dev...done. Initializing /var...done. Setting the system clock. Cannot access the Hardware Clock via any known method. Use the --debug option to see the details of our search for an access method. Unable to set System Clock to: Thu Sep 13 12:24:00 UTC 2012 ... (warning). INIT: Entering runlevel: 2 libubi: error!: cannot open "/dev/ubi_ctrl" So far so good. But if I pack the whole story into a squashfs and boot from there, it is acting strange. It's telling me while booting that it is unable to open an initial console and its throwing errors on mounting the UBIFS devices, but finally provides a login anyway. Over that my echo's are not executed. If I then log in, /dev is mounted as TMPFS as desired and all the devices reside inside. When I redo the "mount" command to mount the UBIFS partitions it is executed whitout problem and useable. From squashfs VFS: Mounted root (squashfs filesystem) readonly on device 31:15. Freeing init memory: 136K Warning: unable to open an initial console. mmc0: new high speed SDHC card at address 0007 mmcblk0: mmc0:0007 SD04G 3.67 GiB mmcblk0: p1 UBIFS error (pid 484): ubifs_get_sb: cannot open "ubi1_0", error -19 Additionally, a part of the rest of the bootscripts is still exexuted, but not all of them. Does anyone has a clue why? Other question, is 5MB enough/too much for /dev?

  Read the article

• Connect ps/2->usb keyboard to linux?

  - by Daniel

  I have a lovely ancient ergonomic keyboard (no name SK - 6000) connected via a DIN-ps/2 adapter to a ps/2-usb adapter to my docking station. After Grub it stops working. It takes either suspending and waking up or replugging it while Linux is running to get it to work. No extra kernel modules get loaded for this. When it works and I restart without power off, it will work immediately. Even when it does not work, it is visible (lsusb device number varies but output is identical whether working or not): $ lsusb -v -s 001:006 Bus 001 Device 006: ID 0a81:0205 Chesen Electronics Corp. PS/2 Keyboard+Mouse Adapter Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x0a81 Chesen Electronics Corp. idProduct 0x0205 PS/2 Keyboard+Mouse Adapter bcdDevice 0.10 iManufacturer 1 CHESEN iProduct 2 PS2 to USB Converter iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 59 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 2 PS2 to USB Converter bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 1 Boot Interface Subclass bInterfaceProtocol 1 Keyboard iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.10 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 64 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 1 Boot Interface Subclass bInterfaceProtocol 2 Mouse iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.10 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 148 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Device Status: 0x0000 (Bus Powered) $ ll -R /sys/bus/hid/drivers/ /sys/bus/hid/drivers/: total 0 drwxr-xr-x 2 root root 0 Jul 8 2012 generic-usb/ /sys/bus/hid/drivers/generic-usb: total 0 lrwxrwxrwx 1 root root 0 Jul 7 23:33 0003:046D:C03D.0003 -> ../../../../devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.2/1-1.2.2:1.0/0003:046D:C03D.0003/ lrwxrwxrwx 1 root root 0 Jul 7 23:33 0003:0A81:0205.0001 -> ../../../../devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/0003:0A81:0205.0001/ lrwxrwxrwx 1 root root 0 Jul 7 23:33 0003:0A81:0205.0002 -> ../../../../devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.1/0003:0A81:0205.0002/ --w------- 1 root root 4096 Jul 7 23:32 bind lrwxrwxrwx 1 root root 0 Jul 7 23:33 module -> ../../../../module/usbhid/ --w------- 1 root root 4096 Jul 7 23:32 new_id --w------- 1 root root 4096 Jul 8 2012 uevent --w------- 1 root root 4096 Jul 7 23:32 unbind When replugging, dmesg shows this (which except for the 1st line and different input numbers already came at boot time): [ 1583.295385] usb 1-1.2.1: new low-speed USB device number 6 using ehci_hcd [ 1583.446514] input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/input/input17 [ 1583.446817] generic-usb 0003:0A81:0205.0001: input,hidraw0: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:1a.0-1.2.1/input0 [ 1583.454764] input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.1/input/input18 [ 1583.455534] generic-usb 0003:0A81:0205.0002: input,hidraw1: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:1a.0-1.2.1/input1 [ 1583.455578] usbcore: registered new interface driver usbhid [ 1583.455584] usbhid: USB HID core driver So I tried $ sudo udevadm test /sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/0003:0A81:0205.0001/hidraw/hidraw0 run_command: calling: test adm_test: version 175 This program is for debugging only, it does not run any program, specified by a RUN key. It may show incorrect results, because some values may be different, or not available at a simulation run. parse_file: reading '/lib/udev/rules.d/40-crda.rules' as rules file parse_file: reading '/lib/udev/rules.d/40-fuse.rules' as rules file ... parse_file: reading '/lib/udev/rules.d/40-usb-media-players.rules' as rules file parse_file: reading '/lib/udev/rules.d/40-usb_modeswitch.rules' as rules file ... parse_file: reading '/lib/udev/rules.d/42-qemu-usb.rules' as rules file ... parse_file: reading '/lib/udev/rules.d/69-cd-sensors.rules' as rules file add_rule: IMPORT found builtin 'usb_id', replacing /lib/udev/rules.d/69-cd-sensors.rules:76 ... parse_file: reading '/lib/udev/rules.d/77-mm-usb-device-blacklist.rules' as rules file ... parse_file: reading '/lib/udev/rules.d/85-usbmuxd.rules' as rules file ... parse_file: reading '/lib/udev/rules.d/95-upower-hid.rules' as rules file parse_file: reading '/lib/udev/rules.d/95-upower-wup.rules' as rules file parse_file: reading '/lib/udev/rules.d/97-bluetooth-hid2hci.rules' as rules file udev_rules_new: rules use 271500 bytes tokens (22625 * 12 bytes), 44331 bytes buffer udev_rules_new: temporary index used 76320 bytes (3816 * 20 bytes) udev_device_new_from_syspath: device 0x7f78a5e4d2d0 has devpath '/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/0003:0A81:0205.0001/hidraw/hidraw0' udev_device_new_from_syspath: device 0x7f78a5e5f820 has devpath '/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/0003:0A81:0205.0001/hidraw/hidraw0' udev_device_read_db: device 0x7f78a5e5f820 filled with db file data udev_device_new_from_syspath: device 0x7f78a5e60270 has devpath '/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/0003:0A81:0205.0001' udev_device_new_from_syspath: device 0x7f78a5e609c0 has devpath '/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0' udev_device_new_from_syspath: device 0x7f78a5e61160 has devpath '/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1' udev_device_new_from_syspath: device 0x7f78a5e61960 has devpath '/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2' udev_device_new_from_syspath: device 0x7f78a5e62150 has devpath '/devices/pci0000:00/0000:00:1a.0/usb1/1-1' udev_device_new_from_syspath: device 0x7f78a5e62940 has devpath '/devices/pci0000:00/0000:00:1a.0/usb1' udev_device_new_from_syspath: device 0x7f78a5e630f0 has devpath '/devices/pci0000:00/0000:00:1a.0' udev_device_new_from_syspath: device 0x7f78a5e638a0 has devpath '/devices/pci0000:00' udev_event_execute_rules: no node name set, will use kernel supplied name 'hidraw0' udev_node_add: creating device node '/dev/hidraw0', devnum=251:0, mode=0600, uid=0, gid=0 udev_node_mknod: preserve file '/dev/hidraw0', because it has correct dev_t udev_node_mknod: preserve permissions /dev/hidraw0, 020600, uid=0, gid=0 node_symlink: preserve already existing symlink '/dev/char/251:0' to '../hidraw0' udev_device_update_db: created empty file '/run/udev/data/c251:0' for '/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/0003:0A81:0205.0001/hidraw/hidraw0' ACTION=add DEVNAME=/dev/hidraw0 DEVPATH=/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/0003:0A81:0205.0001/hidraw/hidraw0 MAJOR=251 MINOR=0 SUBSYSTEM=hidraw UDEV_LOG=6 USEC_INITIALIZED=969079051 The later lines sound like it's already there. And none of these awakes the keyboard: $ sudo udevadm trigger --verbose --sysname-match=usb* /sys/devices/pci0000:00/0000:00:1a.0/usb1 /sys/devices/pci0000:00/0000:00:1a.0/usbmon/usbmon1 /sys/devices/pci0000:00/0000:00:1d.0/usb2 /sys/devices/pci0000:00/0000:00:1d.0/usbmon/usbmon2 /sys/devices/virtual/usbmon/usbmon0 $ sudo udevadm trigger --verbose --sysname-match=hidraw0 /sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/0003:0A81:0205.0001/hidraw/hidraw0 $ sudo udevadm trigger I also tried this to no avail: # echo -n 0003:0A81:0205.0001 > /sys/bus/hid/drivers/generic-usb/bind ksh: echo: write to 1 failed [No such device] # echo -n 0003:0A81:0205.0001 > /sys/bus/hid/drivers/generic-usb/unbind # echo -n 0003:0A81:0205.0001 > /sys/bus/hid/drivers/generic-usb/bind # echo usb1 >/sys/bus/usb/drivers/usb/unbind # echo usb1 >/sys/bus/usb/drivers/usb/bind What else should I try to get the same result as replugging or suspending, by just issuing a command?

  Read the article

• How do I add xen kernel boot parameters in grub2?

  - by Matt

  I know that I can add command line parameters to the grub2 command line by editing /etc/default/grub according to this answer How do I add a boot parameter to grub2 in Ubuntu 10.10? However, that would apply to ALL kernels would it not? How do I apply the command line parameters to specific kernels? i.e. only xen. I'm wanting to append something like: xen-pciback.hide=(06:00.0) I'm guessing I need to add it somewhere in the file: /etc/grub.d/20_linux_xen Which contains: #! /bin/sh set -e # grub-mkconfig helper script. # Copyright (C) 2006,2007,2008,2009,2010 Free Software Foundation, Inc. # # GRUB is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation, either version 3 of the License, or # (at your option) any later version. # # GRUB is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with GRUB. If not, see <http://www.gnu.org/licenses/>. prefix=/usr exec_prefix=${prefix} bindir=${exec_prefix}/bin libdir=${exec_prefix}/lib . ${libdir}/grub/grub-mkconfig_lib export TEXTDOMAIN=grub export TEXTDOMAINDIR=${prefix}/share/locale CLASS="--class gnu-linux --class gnu --class os --class xen" if [ "x${GRUB_DISTRIBUTOR}" = "x" ] ; then OS=GNU/Linux else OS="${GRUB_DISTRIBUTOR} GNU/Linux" CLASS="--class $(echo ${GRUB_DISTRIBUTOR} | tr '[A-Z]' '[a-z]' | cut -d' ' -f1) ${CLASS}" fi # loop-AES arranges things so that /dev/loop/X can be our root device, but # the initrds that Linux uses don't like that. case ${GRUB_DEVICE} in /dev/loop/*|/dev/loop[0-9]) GRUB_DEVICE=`losetup ${GRUB_DEVICE} | sed -e "s/^[^(]*(\([^)]\+\)).*/\1/"` # We can't cope with devices loop-mounted from files here. case ${GRUB_DEVICE} in /dev/*) ;; *) exit 0 ;; esac ;; esac if [ "x${GRUB_DEVICE_UUID}" = "x" ] || [ "x${GRUB_DISABLE_LINUX_UUID}" = "xtrue" ] \ || ! test -e "/dev/disk/by-uuid/${GRUB_DEVICE_UUID}" \ || uses_abstraction "${GRUB_DEVICE}" lvm; then LINUX_ROOT_DEVICE=${GRUB_DEVICE} else LINUX_ROOT_DEVICE=UUID=${GRUB_DEVICE_UUID} fi linux_entry () { os="$1" version="$2" xen_version="$3" recovery="$4" args="$5" xen_args="$6" if ${recovery} ; then title="$(gettext_quoted "%s, with Xen %s and Linux %s (recovery mode)")" else title="$(gettext_quoted "%s, with Xen %s and Linux %s")" fi printf "menuentry '${title}' ${CLASS} {\n" "${os}" "${xen_version}" "${version}" if ! ${recovery} ; then save_default_entry | sed -e "s/^/\t/" fi if [ -z "${prepare_boot_cache}" ]; then prepare_boot_cache="$(prepare_grub_to_access_device ${GRUB_DEVICE_BOOT} | sed -e "s/^/\t/")" fi printf '%s\n' "${prepare_boot_cache}" xmessage="$(gettext_printf "Loading Xen %s ..." ${xen_version})" lmessage="$(gettext_printf "Loading Linux %s ..." ${version})" cat << EOF echo '$xmessage' multiboot ${rel_xen_dirname}/${xen_basename} placeholder ${xen_args} echo '$lmessage' module ${rel_dirname}/${basename} placeholder root=${linux_root_device_thisversion} ro ${args} EOF if test -n "${initrd}" ; then message="$(gettext_printf "Loading initial ramdisk ...")" cat << EOF echo '$message' module ${rel_dirname}/${initrd} EOF fi cat << EOF } EOF } linux_list=`for i in /boot/vmlinu[xz]-* /vmlinu[xz]-* ; do basename=$(basename $i) version=$(echo $basename | sed -e "s,^[^0-9]*-,,g") if grub_file_is_not_garbage "$i" && grep -qx "CONFIG_XEN_DOM0=y" /boot/config-${version} 2> /dev/null ; then echo -n "$i " ; fi done` xen_list=`for i in /boot/xen*; do if grub_file_is_not_garbage "$i" ; then echo -n "$i " ; fi done` prepare_boot_cache= while [ "x${xen_list}" != "x" ] ; do list="${linux_list}" current_xen=`version_find_latest $xen_list` xen_basename=`basename ${current_xen}` xen_dirname=`dirname ${current_xen}` rel_xen_dirname=`make_system_path_relative_to_its_root $xen_dirname` xen_version=`echo $xen_basename | sed -e "s,.gz$,,g;s,^xen-,,g"` echo "submenu \"Xen ${xen_version}\" {" while [ "x$list" != "x" ] ; do linux=`version_find_latest $list` echo "Found linux image: $linux" >&2 basename=`basename $linux` dirname=`dirname $linux` rel_dirname=`make_system_path_relative_to_its_root $dirname` version=`echo $basename | sed -e "s,^[^0-9]*-,,g"` alt_version=`echo $version | sed -e "s,\.old$,,g"` linux_root_device_thisversion="${LINUX_ROOT_DEVICE}" initrd= for i in "initrd.img-${version}" "initrd-${version}.img" \ "initrd-${version}" "initrd.img-${alt_version}" \ "initrd-${alt_version}.img" "initrd-${alt_version}"; do if test -e "${dirname}/${i}" ; then initrd="$i" break fi done if test -n "${initrd}" ; then echo "Found initrd image: ${dirname}/${initrd}" >&2 else # "UUID=" magic is parsed by initrds. Since there's no initrd, it can't work here. linux_root_device_thisversion=${GRUB_DEVICE} fi linux_entry "${OS}" "${version}" "${xen_version}" false \ "${GRUB_CMDLINE_LINUX} ${GRUB_CMDLINE_LINUX_DEFAULT}" "${GRUB_CMDLINE_XEN} ${GRUB_CMDLINE_XEN_DEFAULT}" if [ "x${GRUB_DISABLE_RECOVERY}" != "xtrue" ]; then linux_entry "${OS}" "${version}" "${xen_version}" true \ "single ${GRUB_CMDLINE_LINUX}" "${GRUB_CMDLINE_XEN}" fi list=`echo $list | tr ' ' '\n' | grep -vx $linux | tr '\n' ' '` done echo "}" xen_list=`echo $xen_list | tr ' ' '\n' | grep -vx $current_xen | tr '\n' ' '` done

  Read the article

< Previous Page | 552 553 554 555 556 557 558 559 560 561 562 563  | Next Page >