Search Results

Search found 15216 results on 609 pages for 'oracle streams'.

Page 556/609 | < Previous Page | 552 553 554 555 556 557 558 559 560 561 562 563  | Next Page >

  • Running a small IPTV station

    - by nixterrimus
    I'm looking to run an iptv station for my dorm. I know I can serve multicast so that's not a problem. The station will serve out podcasts and other cc licensed content. The target endpoint is xbmc- a media center. So far I know that I need to serve an rtp stream over udp that's streaming an mpeg-4 avc main or high profile with aac ( or ac3 ?) audio. I've had some luck using vlc with vlm to stream but it seems limited. What are my other options?  Everything has to run on Linux- hopefully open source. How can I use playlists and not live streams? What are my software options?

    Read the article

  • Is RAID 0 or JBOD better for home media server?

    - by Donald Hughes
    I have an external two-bay drive enclosure (the OWC Mercury Elite-AL Pro) connected to a Mac Mini (my home media server) over FireWire 800. I'm streaming media to other computers in the house over wired gigabit. I have two 1.5 TB drives that I'm using independently right now. The media is on one, and I'm mirroring the files to the other drive at night as a backup. But as I approach filling up the drive I'm wanting to span those two drives together to give me a total of about 3 TB, and then buy another drive for backups. The external enclosure supports both RAID 0 and JBOD, but I'm not clear on which would be better in this situation. Would RAID 0 provide any performance improvements over JBOD for streaming video (possibly several streams at once? How does each affect the MTBF of the drives? In general, should I choose RAID 0, JBOD, or keep them independent?

    Read the article

  • ¿How to set maximum downloads or sockets or whatever, in Apache and or PHP?

    - by Petruza
    I made a PHP script, running from my localhost, that streams files from a remote server and serves them. I do this so I can rename the files prior to the browser shows the dialog to save them, through header( "filename:..." ) Anyway, although the remote server allows many simultaneous file downloads at good rates, when they stream through my local apache/php I can't get more than 6 at the same time. When I try to download the 7th, the save as dialog appears as soon as the sixth download has finished. I'm almost sure this is some limit imposed by php.ini or apache's httpd.ini, but don't have a clue about which one is it. do you?

    Read the article

  • Pidgin not working with Gtalk

    - by Selvakumar Ponnusamy
    I have downloaded latest Pidgin(version 2.10.6) for Windows and tried to gtalk account to it. It shows "not authorized" error. I have tried many options given in the net and its not working for me, Below are the values I have given, Basic Tab: Protocal: XMPP Username: <my username> Domain: gmail.com Password: <My Password> and enabled Remember password check box Advanced Tab: Connection security: Require Encryption (Default) Unhecked "Allow plaintext auth over unencrypted streams" (Default) Connection Port: 5222 (Default) Connect server: talk.google.com File Transfer proxies: proxy.eu.jabber.org (default) BOSH URL: <Empty> (default) I enabled two step verification process for my gmail account, So I created application specific password and given here. But Its not working. Please help me what could be the problem and how to resolve it?

    Read the article

  • sound volume increase beyond 100% whenever possible on linux

    - by fakedrake
    Some audio output from files or streams is too low. It is obvious that hardware is able to play the same sounds but louder but because of the data it just plays it at some low level even at 100% volume. Vlc can generally increase the volume of a file up to 200%. Is there a way to do the same thing VLC does system-wide and if possible for an arbitrary v percentage value. If there is no application that does this, where should i look into for libs to do it myself or what code should i modify(eg code in the alsamixer) thank you

    Read the article

  • Apache error "No address associated with hostname" on Arch Linux (ZMLarch)

    - by Eedoh
    I'm trying to set up video surveillance system using IP cameras and ZoneAlarm on Arch Linux. I set up fixed IP address, I've managed to get streams from cameras, etc. However, after restart of the machine, I cannot start Apache again. I checked configuration of rc.conf, and saw that static IP configuration has been deleted, and also secondary nameserver in resolv.conf. Tried to re-write these with correct parameters, but now with no effect. This is tail of my /var/log/httpd/error_log file, after /etc/rc.d/httpd restart attempt [Fri Jan 29 04:20:45 2010] [alert] (EAI 5) No address associated with hostname: mod_unique_id: unable to find IPv4 address of "zmhost" Configuration failed Anybody have an idea on how could I fix this?

    Read the article

  • What program should I use for SSL stripping and re-encrypting

    - by Sparksis
    I'm trying to strip a HTTP over SSL connection down to SSL and then re-encrypt the channel (with a signed certificate(s) I can provide). Of course I want to be able to store captures of all the un-encrypted data. The purpose of this is to reverse engineer a HTTP handshake that is used by a SIP program on my machine. I've tried SSLstrip but it doesn't support what I need it too. Edit: I want something to this effect https://github.com/applidium/Cracking-Siri/blob/master/tcpProxy.rb only more generic and able to write to a pcap stream that wireshark will understand (I'm not sure if this does that). Edit2: upon further inspection this does not create pcap streams. I guess if need be I can write a compatible version but that is not the desired choice.

    Read the article

  • Java 7 update 6 installation fails on Windows 7 when Chrome is default browser

    - by ali1234
    I am configuring a brand new Lenovo U410 system with Windows 7 Home Premium for a user. I received the system direct from the shop. As part of the configuration I installed Java using the online installer. This worked correctly. Later, due to a mistake I made, I needed to restore the system to factory default. The factory default FORMATS C:\ and puts back (supposedly) the exact factory configuration. However, after doing this, I was no longer able to install Java successfully using the same method I used before. Now, whenever I attempt to use the online Java installer, the following happens. First of all, a window always appears "Welcome to Java", "Downloading Java Installer...". After short time this window disappears and then one of three things happens: The very first time I do this after doing a factory reset, I get a Windows error report, which contains this information: Application Name: JavaSetup7u5.exe Application Version: 7.0.50.6 Application Timestamp: 4feacd84 Fault Module Name: JavaIC.dll Fault Module Version: 9.9.9.9 Fault Module Timestamp: 4f2343d6 Exception Offset: 000052cb Exception Code: c0000417 Exception Data: 00000000 OS Version: 6.1.7600.2.0.0.768.3 Locale ID: 1033 Additional Information 1: 773c Additional Information 2: 773cd78cf06816f8246f359fa270f3bb Additional Information 3: f51a Additional Information 4: f51aaea7d22f36fa9e3a626b5a5cd1c3 2. Subsequent runs produce either this error message: "Error: Java(TM) installer - Downloaded file C:\Users\\AppData\Local\Temp\fx-runtime.exe is corrupt." or Nothing happens at all. I Believe this is a red herring. Running the installer again causes a different error because the files were downloaded and the installer crashed before it could clean up. This isn't the actual problem, as when this happens the installer deletes the downloaded files, and then when you run it for the third time, it downloads everything again and does the javaic.dll crash. I suspect the downloader is appending to the existing files or something, causing the corruption. I have tried all of the above as Administrator and as a normal user. I have tried reseting the system to factory defaults several times. I have tried downloading with Chrome and Internet Explorer 9. I have tried uninstalling all anti-virus software and disabling the windows firewall entirely. The only thing which makes a difference is running the installer in Windows XP compatibility mode, which allows the installation to complete. I know I can workaround this error by using the offline installer so please don't post that as an answer. I am looking for an explanation of the root cause. Additionally, if I use the offline installer, the updater does not work. The updater also does not work if I install in XP mode. The updater fails because it works by just downloading the newest online setup and running it. Also remember that the installers are digitally signed. The signitures verify correctly so there is no way in hell that this is caused by corrupted downloads. Some theories I have: The Java setup files on java.com actually changed in between the first successful install and my later attempts. Seems unlikely as none of the version numbers have changed. However, I have seen a couple of reports of this error which showed up in the past 24 hours. This looks like the most likely explanation right now: http://www.oracle.com/us/corporate/press/1735645 - Oracle released 7 update 6 two days ago. Careful inspection of the installers reveal that they are in fact attempting to download .6, not .5 as the download page claims. Not actually correct. Only the update tool tries to install 7u6. The online installer still tries 7u5. However, 7u6 being released two days ago is too much of a coincidence to ignore. Update: The 7u6 online installer is available from Oracle technetwork. It crashes in exactly the same way. The factory reset software uses GMT-8 and I am on GMT-1. As a result, after factory reset, any software which cares to check would think that the system was restored 7 hours in the future, due to Window's awful policy of storing local time in the system clock. This could be confusing a certificate check or similar. Update: I discovered that this does cause Windows Update to fail. The workaround, setting the clock back before starting factory reset, does not enable Java to install correctly. The factory reset image isn't really the same as what is installed in the main partition when you buy the system. Naughty Lenovo. The installer appears to crash while installing or displaying something to do with the Ask.com toolbar. That seems to be what javaic.dll does. Microsoft Tuesday was the 14th. Some update in that could be causing this. However, I'm factory reseting the machine every time, so unless the patches get slipstreamed into the recovery image, or there is some mechanism by which they get silently installed even if updates are disabled, then I don't see how this can be the cause. Major breakthrough: The default browser on Lenovo systems is Google Chrome. I noticed that the JavaIC.dll "sponsor check" actually does a check on your default browser in order to decide which sponsor ad to display. Normally that would get you the Ask toolbar on IE9. But that toolbar doesn't work on Chrome, and so the installer tries to display a different ad. The different ad is what causes the crash. Changing the default browser to IE9 allows the installer to run correctly. So this looks like a genuine bug in the sponsor ad code in the installer, caused by a combination of Google Chrome default browser and not being in the US. (Installer also checks your location using IP geolocation service and displays different ads based on that.)

    Read the article

  • What tool can record multiple parallel stream to files of defined size?

    - by Hauke
    I would like to record record multiple audio web streams like this one in parallel to an mp3 or wma file for a duration of several days. I would like to be able to limit the file size or the duration stored in each file. The tool can be for any operating system. I do not need anything fancy like song recognition, metadata or silence detection. I haven't been able to find such a piece of software so far. Example: Tap channel "News" results in: News-090902-0000-0100.mp3, News-090902-0100-0200.mp3, etc... Who knows what tool can do this? It can be commercial software. Link in fulltext: 88.84.145.116:8000/listen.pls

    Read the article

  • How to create a virtual audio device and stream audio input with it

    - by Steven Rosato
    Is it possible to create another audio device and redirect only wanted input streams to it? Here's my concrete problem: I am broadcasting a game via XFire and it uses the Windows audio device to capture any audio I receive. As I am broadcasting, other users who watch the video stream are communicating with me over Skype, and they hear themselves back within the video stream and it is entirely logical since I am broadcasting the audio I hear. What I want to do is create another audio device within Windows and redirect (pipe) ONLY the audio input from that game and not the input reveived from Skype. I would then tell XFire to use that newly created "virtual" audio device to broadcast and therefore my partners won't hear themselves back. Is there any software that can do that or can it be achieved natively with Windows? (I am under Windows 7).

    Read the article

  • Windows Explorer view style via GPO or registry edit

    - by iamninja
    I'm having some difficulty adjusting the default view style in windows explorer (e.g. list, detail, large icon, small icon). There does not seem to be any pre-baked GPOs for this and next to no documentation on the subject outside of using GUI configuration tools built into windows explorer. Does anyone know the specific registry keys that need to be edited for this? I've already taken a look at HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Streams\Settings but the adjustments I've made there don't seem to make any change on their own.

    Read the article

  • Windows 7: Open File - Security Warning box appears for every app on the desktop

    - by Michael Ratanapintha
    Whenever I double-click to open an executable on the desktop (.exe, .bat, etc.), or a shortcut on the desktop that points to an executable, the "Security Warning" pops up and asks me "Are you really sure you want to open that? Stuff from the Internet is dangerous!" I don't usually mind this warning and don't want to disable it globally, but now I'm getting it for any executable on the desktop, even ones that I didn't download from the Web and don't have the Mark of the Web alternate data stream. (That is, streams -d * shouldn't and doesn't help.) This started fairly recently, but I can't really point to anything I did that triggered it. It only occurs in one user account on the machine; the other account doesn't have this problem. Running System Restore didn't help. How can I fix the problem and make the pop-up warning appear only when it's supposed to?

    Read the article

  • video streaming infrastructure advice

    - by Alchemical
    We would like to set-up a live video-chat web site and are looking for basic recomendations for software and hardware set-up. Most streams will be broadcast live from a single person with a web cam, etc., and viewed by typically 1-10 people, although there could be up to 100+ viewers on the high side. Audio and video do not have to be super-high quality, but do need to be "good enough". The main point is to convey the basic info in the video (and audio). If occasionally the frame-rate drops low and then goes back to normal fairly soon, we could live with that. Budget is an issue, so we are in general looking for a lower cost solution that will give us most of what we need in temers of performance and quality. We are looking at Peer1 for co-lo. The rest of our web site will be .Net / Windows platform. We are open to looking at any platform for the best streaming solution, although our technical expertise is currently more on the Windows side.

    Read the article

  • map based on specific type of stream

    - by Steven Penny
    Consider the following file Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'infile.mp4': Stream #0:0(und): Video: h264 (High) (avc1 / 0x31637661), yuv420p, 1920x1038 Stream #0:1(eng): Audio: aac (mp4a / 0x6134706D), 48000 Hz, 5.1, fltp, 386 kb/s Stream #0:2(eng): Audio: aac (mp4a / 0x6134706D), 48000 Hz, stereo, fltp, 124 kb/s I would like to run a command that uses the video and only the stereo audio. With this particular file I could just run ffmpeg -i infile.mp4 -c copy -map v -map :2 outfile.mp4 However this will not work if the audio streams are switched. How can I tell FFmpeg to use the 2 channel audio only?

    Read the article

  • How can private IPV4 addresses get past iptables NAT (tcp RST,FIN)

    - by gscott
    I've got a router performing simple NAT translation using iptables iptables -t nat -o -j MASQUERADE This works fine almost all of the time except for one particular case where some TCP RST and FIN packets are leaving the router un-NAT'd. In this scenario I setup 1 or 2 client computers streaming Flash video (eg www.nasa.gov/ntv) At the router I then tear down and re-establish the public interface (which is a modem) As expected the Flash streams stall out. After the connection is re-established and I try to refresh the Flash pages, I see some TCP RST and [FIN,ACK] packets leaving the public interface (I assume as Flash attempts to recover its stream). I don't know how these packets can leave the router non-NAT'd

    Read the article

  • Cross-platform, human-readable, du on root partition that truly ignores other filesystems

    - by nice_line
    I hate this so much: Linux builtsowell 2.6.18-274.7.1.el5 #1 SMP Mon Oct 17 11:57:14 EDT 2011 x86_64 x86_64 x86_64 GNU/Linux df -kh Filesystem Size Used Avail Use% Mounted on /dev/mapper/mpath0p2 8.8G 8.7G 90M 99% / /dev/mapper/mpath0p6 2.0G 37M 1.9G 2% /tmp /dev/mapper/mpath0p3 5.9G 670M 4.9G 12% /var /dev/mapper/mpath0p1 494M 86M 384M 19% /boot /dev/mapper/mpath0p7 7.3G 187M 6.7G 3% /home tmpfs 48G 6.2G 42G 14% /dev/shm /dev/mapper/o10g.bin 25G 7.4G 17G 32% /app/SIP/logs /dev/mapper/o11g.bin 25G 11G 14G 43% /o11g tmpfs 4.0K 0 4.0K 0% /dev/vx lunmonster1q:/vol/oradb_backup/epmxs1q1 686G 507G 180G 74% /rpmqa/backup lunmonster1q:/vol/oradb_redo/bisxs1q1 4.0G 1.6G 2.5G 38% /bisxs1q/rdoctl1 lunmonster1q:/vol/oradb_backup/bisxs1q1 686G 507G 180G 74% /bisxs1q/backup lunmonster1q:/vol/oradb_exp/bisxs1q1 2.0T 1.1T 984G 52% /bisxs1q/exp lunmonster2q:/vol/oradb_home/bisxs1q1 10G 174M 9.9G 2% /bisxs1q/home lunmonster2q:/vol/oradb_data/bisxs1q1 52G 5.2G 47G 10% /bisxs1q/oradata lunmonster1q:/vol/oradb_redo/bisxs1q2 4.0G 1.6G 2.5G 38% /bisxs1q/rdoctl2 ip-address1:/vol/oradb_home/cspxs1q1 10G 184M 9.9G 2% /cspxs1q/home ip-address2:/vol/oradb_backup/cspxs1q1 674G 314G 360G 47% /cspxs1q/backup ip-address2:/vol/oradb_redo/cspxs1q1 4.0G 1.5G 2.6G 37% /cspxs1q/rdoctl1 ip-address2:/vol/oradb_exp/cspxs1q1 4.1T 1.5T 2.6T 37% /cspxs1q/exp ip-address2:/vol/oradb_redo/cspxs1q2 4.0G 1.5G 2.6G 37% /cspxs1q/rdoctl2 ip-address1:/vol/oradb_data/cspxs1q1 160G 23G 138G 15% /cspxs1q/oradata lunmonster1q:/vol/oradb_exp/epmxs1q1 2.0T 1.1T 984G 52% /epmxs1q/exp lunmonster2q:/vol/oradb_home/epmxs1q1 10G 80M 10G 1% /epmxs1q/home lunmonster2q:/vol/oradb_data/epmxs1q1 330G 249G 82G 76% /epmxs1q/oradata lunmonster1q:/vol/oradb_redo/epmxs1q2 5.0G 609M 4.5G 12% /epmxs1q/rdoctl2 lunmonster1q:/vol/oradb_redo/epmxs1q1 5.0G 609M 4.5G 12% /epmxs1q/rdoctl1 /dev/vx/dsk/slaxs1q/slaxs1q-vol1 183G 17G 157G 10% /slaxs1q/backup /dev/vx/dsk/slaxs1q/slaxs1q-vol4 173G 58G 106G 36% /slaxs1q/oradata /dev/vx/dsk/slaxs1q/slaxs1q-vol5 75G 952M 71G 2% /slaxs1q/exp /dev/vx/dsk/slaxs1q/slaxs1q-vol2 9.8G 381M 8.9G 5% /slaxs1q/home /dev/vx/dsk/slaxs1q/slaxs1q-vol6 4.0G 1.6G 2.2G 42% /slaxs1q/rdoctl1 /dev/vx/dsk/slaxs1q/slaxs1q-vol3 4.0G 1.6G 2.2G 42% /slaxs1q/rdoctl2 /dev/mapper/appoem 30G 1.3G 27G 5% /app/em Yet, I equally, if not quite a bit more, also hate this: SunOS solarious 5.10 Generic_147440-19 sun4u sparc SUNW,SPARC-Enterprise Filesystem size used avail capacity Mounted on kiddie001Q_rpool/ROOT/s10s_u8wos_08a 8G 7.7G 1.3G 96% / /devices 0K 0K 0K 0% /devices ctfs 0K 0K 0K 0% /system/contract proc 0K 0K 0K 0% /proc mnttab 0K 0K 0K 0% /etc/mnttab swap 15G 1.8M 15G 1% /etc/svc/volatile objfs 0K 0K 0K 0% /system/object sharefs 0K 0K 0K 0% /etc/dfs/sharetab fd 0K 0K 0K 0% /dev/fd kiddie001Q_rpool/ROOT/s10s_u8wos_08a/var 31G 8.3G 6.6G 56% /var swap 512M 4.6M 507M 1% /tmp swap 15G 88K 15G 1% /var/run swap 15G 0K 15G 0% /dev/vx/dmp swap 15G 0K 15G 0% /dev/vx/rdmp /dev/dsk/c3t4d4s0 3 20G 279G 41G 88% /fs_storage /dev/vx/dsk/oracle/ora10g-vol1 292G 214G 73G 75% /o10g /dev/vx/dsk/oec/oec-vol1 64G 33G 31G 52% /oec/runway /dev/vx/dsk/oracle/ora9i-vol1 64G 33G 31G 59% /o9i /dev/vx/dsk/home 23G 18G 4.7G 80% /export/home /dev/vx/dsk/dbwork/dbwork-vol1 292G 214G 73G 92% /db03/wk01 /dev/vx/dsk/oradg/ebusredovol 2.0G 475M 1.5G 24% /u21 /dev/vx/dsk/oradg/ebusbckupvol 200G 32G 166G 17% /u31 /dev/vx/dsk/oradg/ebuscrtlvol 2.0G 475M 1.5G 24% /u20 kiddie001Q_rpool 31G 97K 6.6G 1% /kiddie001Q_rpool monsterfiler002q:/vol/ebiz_patches_nfs/NSA0304 203G 173G 29G 86% /oracle/patches /dev/odm 0K 0K 0K 0% /dev/odm The people with the authority don't rotate logs or delete packages after install in my environment. Standards, remediation, cohesion...all fancy foreign words to me. ============== How am I supposed to deal with / filesystem full issues across multiple platforms that have a devastating number of mounts? On Red Hat el5, du -x apparently avoids traversal into other filesystems. While this may be so, it does not appear to do anything if run from the / directory. On Solaris 10, the equivalent flag is du -d, which apparently packs no surprises, allowing Sun to uphold its legacy of inconvenience effortlessly. (I'm hoping I've just been doing it wrong.) I offer up for sacrifice my Frankenstein's monster. Tell me how ugly it is. Tell me I should download forbidden 3rd party software. Tell me I should perform unauthorized coreutils updates, piecemeal, across 2000 systems, with no single sign-on, no authorized keys, and no network update capability. Then, please help me make this bastard better: pwd / du * | egrep -v "$(echo $(df | awk '{print $1 "\n" $5 "\n" $6}' | \ cut -d\/ -f2-5 | egrep -v "[0-9]|^$|Filesystem|Use|Available|Mounted|blocks|vol|swap")| \ sed 's/ /\|/g')" | egrep -v "proc|sys|media|selinux|dev|platform|system|tmp|tmpfs|mnt|kernel" | \ cut -d\/ -f1-2 | sort -k2 -k1,1nr | uniq -f1 | sort -k1,1n | cut -f2 | xargs du -shx | \ egrep "G|[5-9][0-9]M|[1-9][0-9][0-9]M" My biggest failure and regret is that it still requires a single character edit for Solaris: pwd / du * | egrep -v "$(echo $(df | awk '{print $1 "\n" $5 "\n" $6}' | \ cut -d\/ -f2-5 | egrep -v "[0-9]|^$|Filesystem|Use|Available|Mounted|blocks|vol|swap")| \ sed 's/ /\|/g')" | egrep -v "proc|sys|media|selinux|dev|platform|system|tmp|tmpfs|mnt|kernel" | \ cut -d\/ -f1-2 | sort -k2 -k1,1nr | uniq -f1 | sort -k1,1n | cut -f2 | xargs du -shd | \ egrep "G|[5-9][0-9]M|[1-9][0-9][0-9]M" This will exclude all non / filesystems in a du search from the / directory by basically munging an egrepped df from a second pipe-delimited egrep regex subshell exclusion that is naturally further excluded upon by a third egrep in what I would like to refer to as "the whale." The munge-fest frantically escalates into some xargs du recycling where -x/-d is actually useful, and a final, gratuitous egrep spits out a list of directories that almost feels like an accomplishment: Linux: 54M etc/gconf 61M opt/quest 77M opt 118M usr/ ##===\ 149M etc 154M root 303M lib/modules 313M usr/java ##====\ 331M lib 357M usr/lib64 ##=====\ 433M usr/lib ##========\ 1.1G usr/share ##=======\ 3.2G usr/local ##========\ 5.4G usr ##<=============Ascending order to parent 94M app/SIP ##<==\ 94M app ##<=======Were reported as 7gb and then corrected by second du with -x. Solaris: 63M etc 490M bb 570M root/cores.ric.20100415 1.7G oec/archive 1.1G root/packages 2.2G root 1.7G oec Guess what? It's really slow. Edit: Are there any bash one-liner heroes out there than can turn my bloated abomination into divine intervention, or at least something resembling gingerly copypasta?

    Read the article

  • Office jukebox systems

    - by jonayoung
    We're looking for a good office jukebox solution where staff can select songs via a web interface to be played over the central set of speakers. Must haves: Web Interface RSS / easy to scrap display of currently playing songs Ability to play mp3s and manage an ordered playlist. Good cataloguing of media. Multiple OSs supported as clients - Windows, Mac, Fedora Linux (will probably be accomplished by virtue of a web interface). We have tried XBMC which worked well as a proof of concept however the web interface is just too immature and has too many bugs for a reliable multi-user solution. I believe the same will be true of boxee. Nice to have: Ability to play music videos onto a monitor Ability to listen to radio streams specifically Shoutcast and the BBC. Ability to run on Linux is a nice to have but windows solutions which worked well would certainly be considered. I am aware of question 61404 and don't believe this to be a duplicate due to the specific requirements.

    Read the article

  • sound volume increase beyond 100% whenever possible on linux

    - by fakedrake
    Some audio output from files or streams is too low. It is obvious that hardware is able to play the same sounds but louder but because of the data it just plays it at some low level even at 100% volume. Vlc can generally increase the volume of a file up to 200%. Is there a way to do the same thing VLC does system-wide and if possible for an arbitrary v percentage value. If there is no application that does this, where should i look into for libs to do it myself or what code should i modify(eg code in the alsamixer) thank you Note: Asked the same thing on stackoverflow and they directed me here.

    Read the article

  • Disk / system configuration for log collection / syslog server

    - by Konrads
    I am looking into building a syslog / logging infrastructure and am pondering about some architecture best practices. Essentially, I see that a syslog system needs to support two conflicting workloads: log collection. Potentially massive streams of data need to be written quickly to disks and indexed. log querying. logs will be queried by both fixed fields such as date and source as well as text search. What is the best disk/system setup assuming I'd like to keep it to a single server for now? Should I use SSDs or ramdisk to off-load some processing? some disks in stripe and some in raid5? I am particularly eyeing Graylog2 with ElasticSearch/MongoDB

    Read the article

  • How to make VLC play a .vlm configuration file in "With no interface mode"?

    - by Ole Jak
    How to make VLC play a VLM configuration file (.vlm) in "With no interface mode" on Windows? So I have a VLM configuration file that should stream audio from mic to localhost so no VLC user interface is needed. If I say to Windows "play VLM file with VLC" it plays correctly, starts the server where I need and streams data. But how to do such a thing manually from the command line (so we suppose we can call vlc.exe by VLC and we are now in folder with the vlc.exe and vlcConfig.vlm files)?

    Read the article

  • Free MPEG cutting/cropping/editing tool

    - by Stijn Sanders
    I'm looking for a free tool to cut MPEG's that are created by recording from a USB cable receiver. There are a number of applications that do this, and some are free, but most of them take the video and audio decoded and pass them into a codec again to write the final output. I already have the MPEG's encoded the way I like, so what I need is a tool that can strip the beginning and the ending of the recording before and optionally commercial breaks, by rearranging the data within the file, not re-encoding it. Now I'm using some old software that came with the cable-receiver, but this actually re-encodes the video when exporting. I've tried VirtualDub but had major trouble getting the audio and video streams to stay in sync (and this was also re-encoding)... I found this which comes pretty close, but doesn't allow much accuracy in selecting cut positions.

    Read the article

  • Lossless cutting of MPEG TS files in Windows

    - by Sebastian P.R. Gingter
    I have several HD video files in transport stream (.ts) format, recorded with my satellite receiver. I want to cut them, as in simply remove a few minutes from the beginning, the end and sometimes a few minutes in the middle of it (remove early start of recordings, late ends and, for some seldom files, the ads). What is a good, ideally but not necessarily free, software with a GUI to do this? Best would be something where you could select points on a timeline and simply cut the elements out. As a resulting file, just the same .ts format would be great, but I could also live with putting the video contents into another container, as long as the video is NOT re-encoded / transcoded. The files have additional audio streams and subtitles. These should be retained in the process. My OS is Windows.

    Read the article

  • Please recommend tools for PC, browser, home network performance problems?

    - by mobibob
    My client is experiencing some odd response behavior in their browser for the past few days. Classic, "nothing has changed" so I am starting at ground zero. Browsing a website will timeout or take a ridiculous time to load -- other times, the same site and query is immediately responsive. Once a connection is established, video streams are uninterrupted. The home network hosts a website, but it is not experiencing any activity in Apache's 'access.log' I am using speedtest.net to check if the ISP through the internet is 'OK' -- which looks typical (average +/-). I have to suspect the home network is beaconing or something very abnormal, but I don't know where to start.

    Read the article

  • How to remove $data stream from file in windows 8

    - by chris.w.mclean
    Windows for a while now has added an additional hidden stream to files that were downloaded from the internet. If you attempted to use these files, you'd get all kinds of odd behavior as windows was detecting this additional stream and then preventing the app / exe from getting all sorts of security clearance. But in previous versions of windows you could right click on a file, go to properties then click 'Unblock' which removed the extra stream. Windows 8 seems to be doing the additional streams trick, but I haven't yet found a way to remove them using the win 8 UI. Anyone know how to do this?

    Read the article

  • bash pipe construct to prepend something to the stdoutput of previous command

    - by AndreasT
    I want to use sendmail to send me stuff and want to do it in a oneliner. echo "mail content" | sendmail emailataddres.com Sends it without subject. The subject line must come before the Mail content, so I am looking for something along the lines of: echo "mail content" | prepend "Subject: All that matters" | sendmail emailataddres.com sed and awk tend to be really awkward to use and remember. EDIT:Just to clarify: echo "Mail content" is just an illustrating example. I need to be able to prepend stuff to stdout streams from any source. e.g.: ifconfig, zcat, etc..

    Read the article

< Previous Page | 552 553 554 555 556 557 558 559 560 561 562 563  | Next Page >