Search Results

Search found 14602 results on 585 pages for 'objected oriented design'.

Page 557/585 | < Previous Page | 553 554 555 556 557 558 559 560 561 562 563 564  | Next Page >

• Siemens AG, Sector Healthcare, Increases Transparency and Improves Customer Loyalty with Web Portal Solution

  - by Kellsey Ruppel

  Siemens AG, Sector Healthcare, Increases Transparency and Improves Customer Loyalty with Web Portal Solution CUSTOMER AND PARTNER INFORMATION Customer Name – Siemens AG, Sector Healthcare Customer Revenue – 73,515 Billion Euro (2011, Siemens AG total) Customer Quote – “The realization of our complex requirements within a very short amount of time was enabled through the competent implementation partner Sapient, who fully used the  very broad scope of standard functionality provided in the Oracle WebCenter Portal, and the management of customer services, who continuously supported the project setup. ” – Joerg Modlmayr, Project Manager, Healthcare Customer Service Portal, Siemens AG The Siemens Healthcare Sector is one of the world's largest suppliers to the healthcare industry and a trendsetter in medical imaging, laboratory diagnostics, medical information technology and hearing aids. Siemens offers its customers products and solutions for the entire range of patient care from a single source – from prevention and early detection to diagnosis, and on to treatment and aftercare. By optimizing clinical workflows for the most common diseases, Siemens also makes healthcare faster, better and more cost-effective. To ensure greater transparency, increased efficiency, higher user acceptance, and additional services, Siemens AG, Sector Healthcare, replaced several existing legacy portal solutions that could not meet the company’s future needs with Oracle WebCenter Portal. Various existing portal solutions that cannot meet future demands will be successively replaced by the new central service portal, which will also allow for the efficient and intuitive implementation of new service concepts.  With Oracle, doctors and hospitals using Siemens medical solutions now have access to a central information portal that provides important information and services at just the push of a button.  Customer Name – Siemens AG, Sector Healthcare Customer URL – www.siemens.com Customer Headquarters – Erlangen, Germany Industry – Industrial Manufacturing Employees – 360,000  Challenges – Replace disparate medical service portals to meet future demands and eliminate an  unnecessarily high level of administrative work caused by heterogeneous installations Ensure portals meet current user demands to improve user-acceptance rates and increase number of total users Enable changes and expansion through standard functionality to eliminate the need for reliance on IT and reduce administrative efforts and associated high costs Ensure efficient and intuitive implementation of new service concepts for all devices and systems Ensure hospitals and clinics to transparently monitor and measure services rendered for the various medical devices and systems  Increase electronic interaction and expand services to achieve a higher level of customer loyalty Solution –  Deployed Oracle WebCenter Portal to ensure greater transparency, and as a result, a higher level of customer loyalty  Provided a centralized platform for doctors and hospitals using Siemens’ medical technology solutions that provides important information and services at the push of a button Reduced significantly the administrative workload by centralizing the solution in the new customer service portal Secured positive feedback from customers involved in the pilot program developed by design experts from Oracle partner Sapient. The interfaces were created with customer needs in mind. The first survey taken shortly after implementation came back with 2.4 points on a scale of 0-3 in the category “customer service portal intuitiveness level” Met all requirements including alignment with the Siemens Style Guide without extensive programming Implemented additional services via the portal such as benchmarking options to ensure the optimal use of the Customer Device Park Provided option for documentation of all services rendered in conjunction with the medical technology systems to ensure that the value of the services are transparent for the decision makers in the hospitals  Saved and stored all machine data from approximately 100,000 remote systems in the central service and information platform Provided the option to register errors online and follow the call status in real-time on the portal Made  available at the push of a button all information on the medical technology devices used in hospitals or clinics—from security checks and maintenance activities to current device statuses Provided PDF format Service Performance Reports that summarize information from periods of time ranging from previous weeks up to one year, meeting medical product law requirements  Why Oracle – Siemens AG favored Oracle for many reasons, however, the company ultimately decided to go with Oracle due to the enormous range of functionality the solutions offered for the healthcare sector.“We are not programmers; we are service providers in the medical technology segment and focus on the contents of the portal. All the functionality necessary for internet-based customer interaction is already standard in Oracle WebCenter Portal, which is a huge plus for us. Having Oracle as our technology partner ensures that the product will continually evolve, providing a strong technology platform for our customer service portal well into the future,” said Joerg Modlmayr project manager, Healthcare Customer Service Portal, Siemens AG. Partner Involvement – Siemens AG selected Oracle Partner Sapient because the company offered a service portfolio that perfectly met Siemens’ requirements and had a wealth of experience implementing Oracle WebCenter Portal. Additionally, Sapient had designers with a very high level of expertise in usability—an aspect that Siemens considered to be of vast importance for the project.  “The Sapient team completely met all our expectations. Our tightly timed project was completed on schedule, and the positive feedback from our users proves that we set the right measures in terms of usability—all thanks to the folks at Sapient,” Modlmayr said.  Partner Name – Sapient GmbH Deutschland Partner URL – www.sapient.com

  Read the article

• When is my View too smart?

  - by Kyle Burns

  In this posting, I will discuss the motivation behind keeping View code as thin as possible when using patterns such as MVC, MVVM, and MVP.  Once the motivation is identified, I will examine some ways to determine whether a View contains logic that belongs in another part of the application.  While the concepts that I will discuss are applicable to most any pattern which favors a thin View, any concrete examples that I present will center on ASP.NET MVC. Design patterns that include a Model, a View, and other components such as a Controller, ViewModel, or Presenter are not new to application development.  These patterns have, in fact, been around since the early days of building applications with graphical interfaces.  The reason that these patterns emerged is simple – the code running closest to the user tends to be littered with logic and library calls that center around implementation details of showing and manipulating user interface widgets and when this type of code is interspersed with application domain logic it becomes difficult to understand and much more difficult to adequately test.  By removing domain logic from the View, we ensure that the View has a single responsibility of drawing the screen which, in turn, makes our application easier to understand and maintain. I was recently asked to take a look at an ASP.NET MVC View because the developer reviewing it thought that it possibly had too much going on in the view.  I looked at the .CSHTML file and the first thing that occurred to me was that it began with 40 lines of code declaring member variables and performing the necessary calculations to populate these variables, which were later either output directly to the page or used to control some conditional rendering action (such as adding a class name to an HTML element or not rendering another element at all).  This exhibited both of what I consider the primary heuristics (or code smells) indicating that the View is too smart: Member variables – in general, variables in View code are an indication that the Model to which the View is being bound is not sufficient for the needs of the View and that the View has had to augment that Model.  Notable exceptions to this guideline include variables used to hold information specifically related to rendering (such as a dynamically determined CSS class name or the depth within a recursive structure for indentation purposes) and variables which are used to facilitate looping through collections while binding. Arithmetic – as with member variables, the presence of arithmetic operators within View code are an indication that the Model servicing the View is insufficient for its needs.  For example, if the Model represents a line item in a sales order, it might seem perfectly natural to “normalize” the Model by storing the quantity and unit price in the Model and multiply these within the View to show the line total.  While this does seem natural, it introduces a business rule to the View code and makes it impossible to test that the rounding of the result meets the requirement of the business without executing the View.  Within View code, arithmetic should only be used for activities such as incrementing loop counters and calculating element widths. In addition to the two characteristics of a “Smart View” that I’ve discussed already, this View also exhibited another heuristic that commonly indicates to me the need to refactor a View and make it a bit less smart.  That characteristic is the existence of Boolean logic that either does not work directly with properties of the Model or works with too many properties of the Model.  Consider the following code and consider how logic that does not work directly with properties of the Model is just another form of the “member variable” heuristic covered earlier: @if(DateTime.Now.Hour < 12) {     <div>Good Morning!</div> } else {     <div>Greetings</div> } This code performs business logic to determine whether it is morning.  A possible refactoring would be to add an IsMorning property to the Model, but in this particular case there is enough similarity between the branches that the entire branching structure could be collapsed by adding a Greeting property to the Model and using it similarly to the following: <div>@Model.Greeting</div> Now let’s look at some complex logic around multiple Model properties: @if (ModelPageNumber + Model.NumbersToDisplay == Model.PageCount         || (Model.PageCount != Model.CurrentPage             && !Model.DisplayValues.Contains(Model.PageCount))) {     <div>There's more to see!</div> } In this scenario, not only is the View code difficult to read (you shouldn’t have to play “human compiler” to determine the purpose of the code), but it also complex enough to be at risk for logical errors that cannot be detected without executing the View.  Conditional logic that requires more than a single logical operator should be looked at more closely to determine whether the condition should be evaluated elsewhere and exposed as a single property of the Model.  Moving the logic above outside of the View and exposing a new Model property would simplify the View code to: @if(Model.HasMoreToSee) {     <div>There’s more to see!</div> } In this posting I have briefly discussed some of the more prominent heuristics that indicate a need to push code from the View into other pieces of the application.  You should now be able to recognize these symptoms when building or maintaining Views (or the Models that support them) in your applications.

  Read the article

• Creating ADF Faces Comamnd Button at Runtime

  - by Frank Nimphius

  Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} In ADF Faces, the command button is an instance of RichCommandButton and can be created at runtime. While creating the button is not difficult at all, adding behavior to it requires knowing about how to dynamically create and add an action listener reference. The example code below shows two methods: The first method, handleButtonPress is a public method exposed on a managed bean. public void handleButtonPress(ActionEvent event){   System.out.println("Event handled");   //optional: partially refresh changed components if command   //issued as a partial submit } The second method is called in response to a user interaction or on page load and dynamically creates and adds a command button. When the button is pressed, the managed bean method – the action handler – defined above is called. The action handler is referenced using EL in the created MethodExpression instance. If the managed bean is in viewScope, backingBeanScope or pageFlowsScope, then you need to add these scopes as a prefix to the EL (as you would when configuring the managed bean reference at design time) //Create command button and add it as a child to the parent component that is passed as an //argument to this method private void reateCommandButton(UIComponent parent){   RichCommandButton edit = new RichCommandButton();   //make the request partial   edit.setPartialSubmit(true);   edit.setText("Edit");                             //compose the method expression to invoke the event handler   FacesContext fctx = FacesContext.getCurrentInstance();   Application application = fctx.getApplication();   ExpressionFactory elFactory = application.getExpressionFactory();   ELContext elContext = facesCtx.getELContext();   MethodExpression methodExpressio = null;   //Make sure the EL expression references a valid managed bean method. Ensure   //the bean scope is properly addressed    methodExpression =  elFactory.createMethodExpression(                              elContext,"#{myRequestScopeBean.handleButtonPress}",                             Object.class,new Class[] {ActionEvent.class});   //Create the command buttonaction listener reference   MethodExpressionActionListener al = null;          al= new MethodExpressionActionListener(methodExpression);    edit.addActionListener(al);     //add new command button to parent component and PPR the component for     //the button to show    parent.getChildren().add(edit);    AdfFacesContext adfFacesContext = AdfFacesContext.getCurrentInstance();     adfFacesContext.addPartialTarget(parent);  }

  Read the article

• Pace Layering Comes Alive

  - by Tanu Sood

  v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} Rick Beers is Senior Director of Product Management for Oracle Fusion Middleware. Prior to joining Oracle, Rick held a variety of executive operational positions at Corning, Inc. and Bausch & Lomb. With a professional background that includes senior management positions in manufacturing, supply chain and information technology, Rick brings a unique set of experiences to cover the impact that technology can have on business models, processes and organizations. Rick hosts the IT Leaders Editorial on a monthly basis. By now, readers of this column are quite familiar with Oracle AppAdvantage, a unified framework of middleware technologies, infrastructure and applications utilizing a pace layered approach to enterprise systems platforms. 1. Standardize and Consolidate core Enterprise Applications by removing invasive customizations, costly workarounds and the complexity that multiple instances creates. 2. Move business specific processes and applications to the Differentiate Layer, thus creating greater business agility with process extensions and best of breed applications managed by cross- application process orchestration. 3. The Innovate Layer contains all the business capabilities required for engagement, collaboration and intuitive decision making. This is the layer where innovation will occur, as people engage one another in a secure yet open and informed way. 4. Simplify IT by minimizing complexity, improving performance and lowering cost with secure, reliable and managed systems across the entire Enterprise. But what hasn’t been discussed is the pace layered architecture that Oracle AppAdvantage adopts. What is it, what are its origins and why is it relevant to enterprise scale applications and technologies? It’s actually a fascinating tale that spans the past 20 years and a basic understanding of it provides a wonderful context to what is evolving as the future of enterprise systems platforms. It all begins in 1994 with a book by noted architect Stewart Brand, of ’Whole Earth Catalog’ fame. In his 1994 book How Buildings Learn, Brand popularized the term ‘Shearing Layers’, arguing that any building is actually a hierarchy of pieces, each of which inherently changes at different rates. In 1997 he produced a 6 part BBC Series adapted from the book, in which Part 6 focuses on Shearing Layers. In this segment Brand begins to introduce the concept of ‘pace’. Brand further refined this idea in his subsequent book, The Clock of the Long Now, which began to link the concept of Shearing Layers to computing and introduced the term ‘pace layering’, where he proposes that: “An imperative emerges: an adaptive [system] has to allow slippage between the differently-paced systems … otherwise the slow systems block the flow of the quick ones and the quick ones tear up the slow ones with their constant change. Embedding the systems together may look efficient at first but over time it is the opposite and destructive as well.” In 2000, IBM architects Ian Simmonds and David Ing published a paper entitled A Shearing Layers Approach to Information Systems Development, which applied the concept of Shearing Layers to systems design and development. It argued that at the time systems were still too rigid; that they constrained organizations by their inability to adapt to changes. The findings in the Conclusions section are particularly striking: “Our starting motivation was that enterprises need to become more adaptive, and that an aspect of doing that is having adaptable computer systems. The challenge is then to optimize information systems development for change (high maintenance) rather than stability (low maintenance). Our response is to make it explicit within software engineering the notion of shearing layers, and explore it as the principle that systems should be built to be adaptable in response to the qualitatively different rates of change to which they will be subjected. This allows us to separate functions that should legitimately change relatively slowly and at significant cost from that which should be changeable often, quickly and cheaply.” The problem at the time of course was that this vision of adaptable systems was simply not possible within the confines of 1st generation ERP, which were conceived, designed and developed for standardization and compliance. It wasn’t until the maturity of open, standards based integration, and the middleware innovation that followed, that pace layering became an achievable goal. And Oracle is leading the way. Oracle’s AppAdvantage framework makes pace layering come alive by taking a strategic vision 20 years in the making and transforming it to a reality. It allows enterprises to retain and even optimize their existing ERP systems, while wrapping around those ERP systems three layers of capabilities that inherently adapt as needed, at a pace that’s optimal for the enterprise.

  Read the article

• NetBeans, JSF, and MySQL Primary Keys using AUTO_INCREMENT

  - by MarkH

  I recently had the opportunity to spin up a small web application using JSF and MySQL. Having developed JSF apps with Oracle Database back-ends before and possessing some small familiarity with MySQL (sans JSF), I thought this would be a cakewalk. Things did go pretty smoothly...but there was one little "gotcha" that took more time than the few seconds it really warranted. The Problem Every DBMS has its own way of automatically generating primary keys, and each has its pros and cons. For the Oracle Database, you use a sequence and point your Java classes to it using annotations that look something like this: @GeneratedValue(strategy=GenerationType.SEQUENCE, generator="POC_ID_SEQ") @SequenceGenerator(name="POC_ID_SEQ", sequenceName="POC_ID_SEQ", allocationSize=1) Between creating the actual sequence in the database and making sure you have your annotations right (watch those typos!), it seems a bit cumbersome. But it typically "just works", without fuss. Enter MySQL. Designating an integer-based field as PRIMARY KEY and using the keyword AUTO_INCREMENT makes the same task seem much simpler. And it is, mostly. But while NetBeans cranks out a superb "first cut" for a basic JSF CRUD app, there are a couple of small things you'll need to bring to the mix in order to be able to actually (C)reate records. The (RUD) performs fine out of the gate. The Solution Omitting all design considerations and activity (!), here is the basic sequence of events I followed to create, then resolve, the JSF/MySQL "Primary Key Perfect Storm": Fire up NetBeans. Create JSF project. Create Entity Classes from Database. Create JSF Pages from Entity Classes. Test run. Try to create record and hit error. It's a simple fix, but one that was fun to find in its completeness. :-) Even though you've told it what to do for a primary key, a MySQL table requires a gentle nudge to actually generate that new key value. Two things are needed to make the magic happen. First, you need to ensure the following annotation is in place in your Java entity classes: @GeneratedValue(strategy = GenerationType.IDENTITY) All well and good, but the real key is this: in your controller class(es), you'll have a create() function that looks something like this, minus the comment line and the setId() call in bold red type:     public String create() {         try {             // Assign 0 to ID for MySQL to properly auto_increment the primary key.             current.setId(0);             getFacade().create(current);             JsfUtil.addSuccessMessage(ResourceBundle.getBundle("/Bundle").getString("CategoryCreated"));             return prepareCreate();         } catch (Exception e) {             JsfUtil.addErrorMessage(e, ResourceBundle.getBundle("/Bundle").getString("PersistenceErrorOccured"));             return null;         }     } Setting the current object's primary key attribute to zero (0) prior to saving it tells MySQL to get the next available value and assign it to that record's key field. Short and simple…but not inherently obvious if you've never used that particular combination of NetBeans/JSF/MySQL before. Hope this helps! All the best, Mark

  Read the article

• Windows for IoT, continued

  - by Valter Minute

  Originally posted on: http://geekswithblogs.net/WindowsEmbeddedCookbook/archive/2014/08/05/windows-for-iot-continued.aspxI received many interesting feedbacks on my previous blog post and I tried to find some time to do some additional tests. Bert Kleinschmidt pointed out that pins 2,3 and 10 of the Galileo are connected directly to the SOC, while pin 13, the one used for the sample sketch is controlled via an I2C I/O expander. I changed my code to use pin 2 instead of 13 (just changing the variable assignment at the beginning of the code) and latency was greatly reduced. Now each pulse lasts for 1.44ms, 44% more than the expected time, but ways better that the result we got using pin 13. I also used SetThreadPriority to increase the priority of the thread that was running the sketch to THREAD_PRIORITY_HIGHEST but that didn't change the results. When I was using the I2C-controlled pin I tried the same and the timings got ways worse (increasing more than 10 times) and so I did not commented on that part, wanting to investigate the issua a bit more in detail. It seems that increasing the priority of the application thread impacts negatively the I2C communication. I tried to use also the Linux-based implementation (using a different Galileo board since the one provided by MS seems to use a different firmware) and the results of running the sample blink sketch modified to use pin 2 and blink the led for 1ms are similar to those we got on the same board running Windows. Here the difference between expected time and measured time is worse, getting around 3.2ms instead of 1 (320% compared to 150% using Windows but far from the 100.1% we got with the 8-bit Arduino). Both systems were not under load during the test, maybe loading some applications that use part of the CPU time would make those timings even less reliable, but I think that those numbers are enough to draw some conclusions. It may not be worth running a full OS if what you need is Arduino compatibility. The Arduino UNO is probably the best Arduino you can find to perform this kind of development. The Galileo running the Linux-based stack or running Windows for IoT is targeted to be a platform for "Internet of Things" devices, whatever that means. At the moment I don't see the "I" part of IoT. We have low level interfaces (SPI, I2C, the GPIO pins) that can be used to connect sensors but the support for connectivity is limited and the amount of work required to deliver some data to the cloud (using a secure HTTP request or a message queuing system like APMQS or MQTT) is still big and the rich OS underneath seems to not provide any help doing that.Why should I use sockets and can't access all the high level connectivity features we have on "full" Windows?I know that it's possible to use some third party libraries, try to build them using the Windows For IoT SDK etc. but this means re-inventing the wheel every time and can also lead to some IP concerns if used for products meant to be closed-source. I hope that MS and Intel (and others) will focus less on the "coolness" of running (some) Arduino sketches and more on providing a better platform to people that really want to design devices that leverage internet connectivity and the cloud processing power to deliver better products and services. Providing a reliable set of connectivity services would be a great start. Providing support for .NET would be even better, leaving native code available for hardware access etc. I know that those components may require additional storage and memory etc. So making the OS componentizable (or, at least, provide a way to install additional components) would be a great way to let developers pick the parts of the system they need to develop their solution, knowing that they will integrate well together. I can understand that the Arduino and Raspberry Pi* success may have attracted the attention of marketing departments worldwide and almost any new development board those days is promoted as "XXX response to Arduino" or "YYYY alternative to Raspberry Pi", but this is misleading and prevents companies from focusing on how to deliver good products and how to integrate "IoT" features with their existing offer to provide, at the end, a better product or service to their customers. Marketing is important, but can't decide the key features of a product (the OS) that is going to be used to develop full products for end customers integrating it with hardware and application software. I really like the "hackable" nature of open-source devices and like to see that companies are getting more and more open in releasing information, providing "hackable" devices and supporting developers with documentation, good samples etc. On the other side being able to run a sketch designed for an 8 bit microcontroller on a full-featured application processor may sound cool and an easy upgrade path for people that just experimented with sensors etc. on Arduino but it's not, in my humble opinion, the main path to follow for people who want to deliver real products.   *Shameless self-promotion: if you are looking for a good book in Italian about the Raspberry Pi , try mine: http://www.amazon.it/Raspberry-Pi-alluso-Digital-LifeStyle-ebook/dp/B00GYY3OKO

  Read the article

• Microsoft BUILD 2013 Day 1&ndash;Keynote

  - by Tim Murphy

  Originally posted on: http://geekswithblogs.net/tmurphy/archive/2013/06/27/microsoft-build-2013-day-1ndashkeynote.aspx This one is going to be a little long because the keynote was jam-packed so bare with me. The keynote for the first day of BUILD 2013 was kicked off by Steve Balmer.  He made it very clear that Microsoft’s focus is on accelerating its time to market with products and product updates.  His quote was that “Rapid release” is the new norm.  He continued by showing off several new Lumias that have been buzzing around the internet for a while and announce that Sprint will now be carrying the HTC 8XT and Samsung ATIV. Balmer is known for repeating words or phrase for affect.  This time it was “Rapid release, rapid release” and “Touch, touch, touch, touch, touch, …”.  This was fun, but even more fun was when he announce that all attendees would receive an Acer Iconia 8” tablet. SCORE! The next subject Balmer focused on is new apps.  The three new ones were Flipboard, Facebook and NFL Fantasy Football.  I liked the first two because these are ones that people coming from other platforms are missing.  The NFL app is great just because it targets a demographic that can be fanatical.  If these types of apps keep coming than the missing app argument goes away. While many Negative Nancy’s are describing Windows 8.1 as Windows 180 Steve Balmer chose to call it a “refined blend” as in a coffee that has been improved with a new mix.  This includes more multi-tasking options and leveraging Bing straight throughout the entire ecosystem. He ended this first section by explaining that this will also bring more Bing development opportunities to the community. Steve Balmer was followed by Julie Larson-Green who spent her time on stage selling us on Windows 8 all over again from my point of view.  Something that I would not have thought was needed until I had listened to some other attendees who had a number of concerns and complaints.  She showed a number of new gestures that will come with Windows 8.1, and while they were cool I was left wondering if they really improved the experience.  I guess only time will tell. I did like the fact that it the UI implementation to bring up “All Apps” now mirrors that of Windows Phone.  The consistency is a big step forward that I hope to see continue.  The cool factor went up from there as she swiped content from a desktop (mega-tablet) to the XBox One.  This seamless experience I believe is what is really needed for any future platform to be relevant. I was much more enthused by the presentation of Antoine Leblond who humbled us by letting us know that there are 5k new API.  How that can be or how anyone would ever use all of them is another question.  His announcement was that the Visual Studio 2013 preview would be available today along with the Windows 8.1 bits.  One of the features of VS2013 that he demonstrated is the power consumption profiler.  With battery life being a key factor with consumer consumption devices this is a welcome addition. He didn’t limit his presentation to VS2013 features though.  He showed how the Store has been redesigned to enable better search and discoverability of apps and how Win 8.1 can perform multiple screen scales depending on the resolution of the device automatically.  The last feature he demoed was the real time video streaming API which he made sure we understood by attaching a Surface to a little robot.  Oh, but there was one more thing.  Antoine and Julie announce that all attendees would also be getting Surface Pros.  BONUS! How much more could there be?  Gurdeep Singh Pall was about to pile on.  He introduced us to Bing as a platform (BaaP?).  He said if they (Microsoft) could do something with and API that is good 3rd party developers can do something that is dynamite and showed us some of the tools they had produced.  These included natural user interface improvements such as voice commands that looked to put Siri to shame.  Add to that 3D, OCR and translation capabilities and the future looks to be full of opportunities. Balmer then came out to show us one last thing.  Project Spark is a game design environment that will be available for Windows 8.1, XBox 360 and XBox One.  All I can say is that if my kids get their hands on this they are going to be able to learn some of what dad does in a much more enjoyable way. At the end of it all I was both exhausted and energized by what I saw.  What could they have possibly left for the day 2 keynote?  I hear it will feature Scott Hanselman.  If that is right we are in for a treat.  See you there. del.icio.us Tags: BUILD 2013,Windows 8.1,Winodws Phone,XAML,Keynote,Bing,Visual Studio 2013,Project Spark

  Read the article

• jqGrid - dynamically load different drop down values for different rows depending on another column value

  - by Renso

  Goal: As we all know the jqGrid examples in the demo and the Wiki always refer to static values for drop down boxes. This of course is a personal preference but in dynamic design these values should be populated from the database/xml file, etc, ideally JSON formatted. Can you do this in jqGrid, yes, but with some custom coding which we will briefly show below (refer to some of my other blog entries for a more detailed discussion on this topic). What you CANNOT do in jqGrid, referrign here up and to version 3.8.x, is to load different drop down values for different rows in the jqGrid. Well, not without some trickery, which is what this discussion is about. Issue: Of course the issue is that jqGrid has been designed for high performance and thus I have no issue with them loading a  reference to a single drop down values list for every column. This way if you have 500 rows or one, each row only refers to a single list for that particuolar column. Nice! SO how easy would it be to simply traverse the grid once loaded on gridComplete or loadComplete and simply load the select tag's options from scratch, via ajax, from memory variable, hard coded etc? Impossible! Since their is no embedded SELECT tag within each cell containing the drop down values (remeber it only has a reference to that list in memory), all you will see when you inspect the cell prior to clicking on it, or even before and on beforeEditCell, is an empty <TD></TD>. When trying to load that list via a click event on that cell will temporarily load the list but jqGrid's last internal callback event will remove it and replace it with the old one, and you are back to square one. Solution: Yes, after spending a few hours on this found a solution to the problem that does not require any updates to jqGrid source code, thank GOD! Before we get into the coding details, the solution here can of course be customized to suite your specific needs, this one loads the entire drop down list that would be needed across all rows once into global variable. I then parse this object that contains all the properties I need to filter the rows depending on which ones I want the user to see based off of another cell value in that row. This only happens when clicking the cell, so no performance penalty. You may of course to load it via ajax when the user clicks the cell, but I found it more effecient to load the entire list as part of jqGrid's normal editoptions: { multiple: false, value: listingStatus } colModel options which again keeps only a reference to the sinlge list, no duplciation. Lets get into the meat and potatoes of it.         var acctId = $('#Id').val();         var data = $.ajax({ url: $('#ajaxGetAllMaterialsTrackingLookupDataUrl').val(), data: { accountId: acctId }, dataType: 'json', async: false, success: function(data, result) { if (!result) alert('Failure to retrieve the Alert related lookup data.'); } }).responseText;         var lookupData = eval('(' + data + ')');         var listingCategory = lookupData.ListingCategory;         var listingStatus = lookupData.ListingStatus;         var catList = '{';         $(lookupData.ListingCategory).each(function() {             catList += this.Id + ':"' + this.Name + '",';         });         catList += '}';         var lastsel;         var ignoreAlert = true;         $(item)         .jqGrid({             url: listURL,             postData: '',             datatype: "local",             colNames: ['Id', 'Name', 'Commission<br />Rep', 'Business<br />Group', 'Order<br />Date', 'Edit', 'TBD', 'Month', 'Year', 'Week', 'Product', 'Product<br />Type', 'Online/<br />Magazine', 'Materials', 'Special<br />Placement', 'Logo', 'Image', 'Text', 'Contact<br />Info', 'Everthing<br />In', 'Category', 'Status'],             colModel: [                 { name: 'Id', index: 'Id', hidden: true, hidedlg: true },                 { name: 'AccountName', index: 'AccountName', align: "left", resizable: true, search: true, width: 100 },                 { name: 'OnlineName', index: 'OnlineName', align: 'left', sortable: false, width: 80 },                 { name: 'ListingCategoryName', index: 'ListingCategoryName', width: 85, editable: true, hidden: false, edittype: "select", editoptions: { multiple: false, value: eval('(' + catList + ')') }, editrules: { required: false }, formatoptions: { disabled: false} }             ],             jsonReader: {                 root: "List",                 page: "CurrentPage",                 total: "TotalPages",                 records: "TotalRecords",                 userdata: "Errors",                 repeatitems: false,                 id: "0"             },             rowNum: $rows,             rowList: [10, 20, 50, 200, 500, 1000, 2000],             imgpath: jQueryImageRoot,             pager: $(item + 'Pager'),             shrinkToFit: true,             width: 1455,             recordtext: 'Traffic lines',             sortname: 'OrderDate',             viewrecords: true,             sortorder: "asc",             altRows: true,             cellEdit: true,             cellsubmit: "remote",             cellurl: editURL + '?rows=' + $rows + '&page=1',             loadComplete: function() {               },             gridComplete: function() {             },             loadError: function(xhr, st, err) {             },             afterEditCell: function(rowid, cellname, value, iRow, iCol) {                 var select = $(item).find('td.edit-cell select');                 $(item).find('td.edit-cell select option').each(function() {                     var option = $(this);                     var optionId = $(this).val();                     $(lookupData.ListingCategory).each(function() {                         if (this.Id == optionId) {                                                       if (this.OnlineName != $(item).getCell(rowid, 'OnlineName')) {                                 option.remove();                                 return false;                             }                         }                     });                 });             },             search: true,             searchdata: {},             caption: "List of all Traffic lines",             editurl: editURL + '?rows=' + $rows + '&page=1',             hiddengrid: hideGrid   Here is the JSON data returned via the ajax call during the jqGrid function call above (NOTE it must be { async: false}: {"ListingCategory":[{"Id":29,"Name":"Document Imaging & Management","OnlineName":"RF Globalnet"} ,{"Id":1,"Name":"Ancillary Department Hardware","OnlineName":"Healthcare Technology Online"} ,{"Id":2,"Name":"Asset Tracking","OnlineName":"Healthcare Technology Online"} ,{"Id":3,"Name":"Asset Tracking","OnlineName":"Healthcare Technology Online"} ,{"Id":4,"Name":"Asset Tracking","OnlineName":"Healthcare Technology Online"} ,{"Id":5,"Name":"Document Imaging & Management","OnlineName":"Healthcare Technology Online"} ,{"Id":6,"Name":"Document Imaging & Management","OnlineName":"Healthcare Technology Online"} ,{"Id":7,"Name":"EMR/EHR Software","OnlineName":"Healthcare Technology Online"}]} I only need the Id and Name for the drop down list, but the third column in the JSON object is important, it is the only that I match up with the OnlineName in the jqGrid column, and then in the loop during afterEditCell simply remove the ones I don't want the user to see. That's it!

  Read the article

• Migrating Core Data to new UIManagedDocument in iOS 5

  - by samerpaul

  I have an app that has been on the store since iOS 3.1, so there is a large install base out there that still uses Core Data loaded up in my AppDelegate. In the most recent set of updates, I raised the minimum version to 4.3 but still kept the same way of loading the data. Recently, I decided it's time to make the minimum version 5.1 (especially with 6 around the corner), so I wanted to start using the new fancy UIManagedDocument way of using Core Data. The issue with this though is that the old database file is still sitting in the iOS app, so there is no migrating to the new document. You have to basically subclass UIManagedDocument with a new model class, and override a couple of methods to do it for you. Here's a tutorial on what I did for my app TimeTag.  Step One: Add a new class file in Xcode and subclass "UIManagedDocument" Go ahead and also add a method to get the managedObjectModel out of this class. It should look like:   @interface TimeTagModel : UIManagedDocument   - (NSManagedObjectModel *)managedObjectModel;   @end   Step two: Writing the methods in the implementation file (.m) I first added a shortcut method for the applicationsDocumentDirectory, which returns the URL of the app directory.  - (NSURL *)applicationDocumentsDirectory {     return [[[NSFileManagerdefaultManager] URLsForDirectory:NSDocumentDirectoryinDomains:NSUserDomainMask] lastObject]; }   The next step was to pull the managedObjectModel file itself (.momd file). In my project, it's called "minimalTime". - (NSManagedObjectModel *)managedObjectModel {     NSString *path = [[NSBundlemainBundle] pathForResource:@"minimalTime"ofType:@"momd"];     NSURL *momURL = [NSURL fileURLWithPath:path];     NSManagedObjectModel *managedObjectModel = [[NSManagedObjectModel alloc] initWithContentsOfURL:momURL];          return managedObjectModel; }   After that, I need to check for a legacy installation and migrate it to the new UIManagedDocument file instead. This is the overridden method: - (BOOL)configurePersistentStoreCoordinatorForURL:(NSURL *)storeURL ofType:(NSString *)fileType modelConfiguration:(NSString *)configuration storeOptions:(NSDictionary *)storeOptions error:(NSError **)error {     // If legacy store exists, copy it to the new location     NSURL *legacyPersistentStoreURL = [[self applicationDocumentsDirectory] URLByAppendingPathComponent:@"minimalTime.sqlite"];          NSFileManager* fileManager = [NSFileManagerdefaultManager];     if ([fileManager fileExistsAtPath:legacyPersistentStoreURL.path])     {         NSLog(@"Old db exists");         NSError* thisError = nil;         [fileManager replaceItemAtURL:storeURL withItemAtURL:legacyPersistentStoreURL backupItemName:niloptions:NSFileManagerItemReplacementUsingNewMetadataOnlyresultingItemURL:nilerror:&thisError];     }          return [superconfigurePersistentStoreCoordinatorForURL:storeURL ofType:fileType modelConfiguration:configuration storeOptions:storeOptions error:error]; }   Basically what's happening above is that it checks for the minimalTime.sqlite file inside the app's bundle on the iOS device.  If the file exists, it tells you inside the console, and then tells the fileManager to replace the storeURL (inside the method parameter) with the legacy URL. This basically gives your app access to all the existing data the user has generated (otherwise they would load into a blank app, which would be disastrous). It returns a YES if successful (by calling it's [super] method). Final step: Actually load this database Due to how my app works, I actually have to load the database at launch (instead of shortly after, which would be ideal). I call a method called loadDatabase, which looks like this: -(void)loadDatabase {     static dispatch_once_t onceToken;          // Only do this once!     dispatch_once(&onceToken, ^{         // Get the URL         // The minimalTimeDB name is just something I call it         NSURL *url = [[selfapplicationDocumentsDirectory] URLByAppendingPathComponent:@"minimalTimeDB"];         // Init the TimeTagModel (our custom class we wrote above) with the URL         self.timeTagDB = [[TimeTagModel alloc] initWithFileURL:url];           // Setup the undo manager if it's nil         if (self.timeTagDB.undoManager == nil){             NSUndoManager *undoManager = [[NSUndoManager  alloc] init];             [self.timeTagDB setUndoManager:undoManager];         }                  // You have to actually check to see if it exists already (for some reason you can't just call "open it, and if it's not there, create it")         if ([[NSFileManagerdefaultManager] fileExistsAtPath:[url path]]) {             // If it does exist, try to open it, and if it doesn't open, let the user (or at least you) know!             [self.timeTagDB openWithCompletionHandler:^(BOOL success){                 if (!success) {                     // Handle the error.                     NSLog(@"Error opening up the database");                 }                 else{                     NSLog(@"Opened the file--it already existed");                     [self refreshData];                 }             }];         }         else {             // If it doesn't exist, you need to attempt to create it             [self.timeTagDBsaveToURL:url forSaveOperation:UIDocumentSaveForCreatingcompletionHandler:^(BOOL success){                 if (!success) {                     // Handle the error.                     NSLog(@"Error opening up the database");                 }                 else{                     NSLog(@"Created the file--it did not exist");                     [self refreshData];                 }             }];         }     }); }   If you're curious what refreshData looks like, it sends out a NSNotification that the database has been loaded: -(void)refreshData {     NSNotification* refreshNotification = [NSNotificationnotificationWithName:kNotificationCenterRefreshAllDatabaseData object:self.timeTagDB.managedObjectContext  userInfo:nil];     [[NSNotificationCenter defaultCenter] postNotification:refreshNotification];     }   The kNotificationCenterRefreshAllDatabaseData is just a constant I have defined elsewhere that keeps track of all the NSNotification names I use. I pass the managedObjectContext of the newly created file so that my view controllers can have access to it, and start passing it around to one another. The reason we do this as a Notification is because this is being run in the background, so we can't know exactly when it finishes. Make sure you design your app for this! Have some kind of loading indicator, or make sure your user can't attempt to create a record before the database actually exists, because it will crash the app.

  Read the article

• How to handle updated configuration when it's already been cloned for editing

  - by alexrussell

  Really sorry about the title that probably doesn't make much sense. Hopefully I can explain myself better here as it's something that's kinda bugged me for ages, and is now becoming a pressing concern as I write a bit of software with configuration. Most software comes with default configuration options stored in the app itself, and then there's a configuration file (let's say) that a user can edit. Once created/edited for the first time, subsequent updates to the application can not (easily) modify this configuration file for fear of clobbering the user's own changes to the default configuration. So my question is, if my application adds a new configurable parameter, what's the best way to aid discoverability of the setting and allow the user (developer) to override it as nicely as possible given the following constraints: I actually don't have a canonical default config in the application per se, it's more of a 'cascading filesystem'-like affair - the config template is stored in default/config.json and when the user wishes to edit the configuration, it's copied to user/config.json. If a user config is found it is used - there is no automatic overriding of a subset of keys, the whole new file is used and that's that. If there's no user config the default config is used. When a user wishes to edit the config they run a command to 'generate' it for them (which simply copies the config.json file from the default to the user directory). There is no UI for the configuration options as it's not appropriate to the userbase (think of my software as a library or something, the users are developers, the config is done in the user/config.json file). Due to my software being library-like there's no simple way to, on updating of the software, run some tasks automatically (so any ideas of look at the current config, compare to template config, add ing missing keys) aren't appropriate. The only solution I can think of right now is to say "there's a new config setting X" in release notes, but this doesn't seem ideal to me. If you want any more information let me know. The above specifics are not actually 100% true to my situation, but they represent the problem equally well with lower complexity. If you do want specifics, however, I can explain the exact setup. Further clarification of the type of configuration I mean: think of the Atom code editor. There appears to be a default 'template' config file somewhere, but as soon as a configuration option is edited ~/.atom/config.cson is generated and the setting goes in there. From now on is Atom is updated and gets a new configuration key, this file cannot be overwritten by Atom without a lot of effort to ensure that the addition/modification of the key does not clobber. In Atom's case, because there is a GUI for editing settings, they can get away with just adding the UI for the new setting into the UI to aid 'discoverability' of the new setting. I don't have that luxury. Clarification of my constraints and what I'm actually looking for: The software I'm writing is actually a package for a larger system. This larger system is what provides the configuration, and the way it works is kinda fixed - I just do a config('some.key') kinda call and it knows to look to see if the user has a config clone and if so use it, otherwise use the default config which is part of my package. Now, while I could make my application edit the user's configuration files (there is a convention about where they're stored), it's generally not done, so I'd like to live with the constraints of the system I'm using if possible. And it's not just about discoverability either, one large concern is that the addition of a configuration key won't actually work as soon as the user has their own copy of the original template. Adding the key to the template won't make a difference as that file is never read. As such, I think this is actually quite a big flaw in the design of the configuration cascading system and thus needs to be taken up with my upstream. So, thinking about it, based on my constraints, I don't think there's going to be a good solution save for either editing the user's configuration or using a new config file every time there are updates to the default configuration. Even the release notes idea from above isn't doable as, if the user does not follow the advice, suddenly I have a config key with no value (user-defined or default). So the new question is this: what is the general way to solve the problem of having a default configuration in template config files and allowing a user to make user-specific version of these in order to override the defaults? A per-key cascade (rather than per-file cascade) where the user only specifies their overrides? In this case, what happens if a configuration value is an array - do we replace or append to the default (or, more realistically, how does the user specify whether they wish to replace or append to)? It seems like configuration is kinda hard, so how is it solved in the wild?

  Read the article

• #OOW 2012 @PARIS...talking Oracle and Clouds, and Optimized Datacenter

  - by Eric Bezille

  For those of you who want to get most out of Oracle technologies to evolve your IT to the Next Wave, I encourage you to register to the up coming Oracle Optimized Datacenter event that will take place in Paris on November 28th. You will get the opportunity to exchange with Oracle experts and customers having successfully evolve their IT by leveraging Oracle technologies. You will also get the latest news on some of the Oracle systems announcements made during OOW 2012. During this event we will make an update about Oracle and Clouds, from private to public and hybrid models. So in preparing this session, I thought it was a good start to make a status of Cloud Computing in France, and CIO requirements in particular. Starting in 2009 with the first Cloud Camp in Paris, the market has evolved, but the basics are still the same : think hybrid. From Traditional IT to Clouds One size doesn't fit all, and for big companies having already an IT in place, there will be parts eligible to external (public) cloud, and parts that would be required to stay inside the firewalls, so ability to integrate both side is key.  None the less, one of the major impact of Cloud Computing trend on IT, reported by Forrester, is the pressure it makes on CIO to evolve towards the same model that end-users are now used to in their day to day life, where self-service and flexibility are paramount. This is what is driving IT to transform itself toward "a Global Service Provider", or for some as "IT "is" the Business" (see : Gartner Identifies Four Futures for IT and CIO), and for both models toward a Private Cloud Service Provider. In this journey, there is still a big difference between most of existing external Cloud and a firm IT : the number of applications that a CIO has to manage. Most cloud providers today are overly specialized, but at the end of the day, there are really few business processes that rely on only one application. So CIOs has to combine everything together external and internal. And for the internal parts that they will have to make them evolve to a Private Cloud, the scope can be very large. This will often require CIOs to evolve from their traditional approach to more disruptive ones, the time has come to introduce new standards and processes, if they want to succeed. So let's have a look at the different Cloud models, what type of users they are addressing, what value they bring and most importantly what needs to be done by the  Cloud Provider, and what is left over to the user. IaaS, PaaS, SaaS : what's provided and what needs to be done First of all the Cloud Provider will have to provide all the infrastructure needed to deliver the service. And the more value IT will want to provide, the more IT will have to deliver and integrate : from disks to applications. As we can see in the above picture, providing pure IaaS, left a lot to cover for the end-user, that’s why the end-user targeted by this Cloud Service is IT people. If you want to bring more value to developers, you need to provide to them a development platform ready to use, which is what PaaS is standing for, by providing not only the processors power, storage and OS, but also the Database and Middleware platform. SaaS being the last mile of the Cloud, providing an application ready to use by business users, the remaining part for the end-users being configuring and specifying the application for their specific usage. In addition to that, there are common challenges encompassing all type of Cloud Services : Security : covering all aspect, not only of users management but also data flows and data privacy Charge back : measuring what is used and by whom Application management : providing capabilities not only to deploy, but also to upgrade, from OS for IaaS, Database, and Middleware for PaaS, to a full Business Application for SaaS. Scalability : ability to evolve ALL the components of the Cloud Provider stack as needed Availability : ability to cover “always on” requirements Efficiency : providing a infrastructure that leverage shared resources in an efficient way and still comply to SLA (performances, availability, scalability, and ability to evolve) Automation : providing the orchestration of ALL the components in all service life-cycle (deployment, growth & shrink (elasticity), upgrades,...) Management : providing monitoring, configuring and self-service up to the end-users Oracle Strategy and Clouds For CIOs to succeed in their Private Cloud implementation, means that they encompass all those aspects for each component life-cycle that they selected to build their Cloud. That’s where a multi-vendors layered approach comes short in terms of efficiency. That’s the reason why Oracle focus on taking care of all those aspects directly at Engineering level, to truly provide efficient Cloud Services solutions for IaaS, PaaS and SaaS. We are going as far as embedding software functions in hardware (storage, processor level,...) to ensure the best SLA with the highest efficiency. The beauty of it, as we rely on standards, is that the Oracle components that you are running today in-house, are exactly the same that we are using to build Clouds, bringing you flexibility, reversibility and fast path to adoption. With Oracle Engineered Systems (Exadata, Exalogic & SPARC SuperCluster, more specifically, when talking about Cloud), we are delivering all those components hardware and software already engineered together at Oracle factory, with a single pane of glace for the management of ALL the components through Oracle Enterprise Manager, and with high-availability, scalability and ability to evolve by design. To give you a feeling of what does that bring in terms just of implementation project timeline, for example with Oracle SPARC SuperCluster, we have a consistent track of record to have the system plug into existing Datacenter and ready in a week. This includes Oracle Database, OS, virtualization, Database Storage (Exadata Storage Cells in this case), Application Storage, and all network configuration. This strategy enable CIOs to very quickly build Cloud Services, taking out not only the complexity of integrating everything together but also taking out the automation and evolution complexity and cost. I invite you to discuss all those aspect in regards of your particular context face2face on November 28th.

  Read the article

• Visual Tree Enumeration

  - by codingbloke

  I feel compelled to post this blog because I find I’m repeatedly posting this same code in silverlight and windows-phone-7 answers in Stackoverflow. One common task that we feel we need to do is burrow into the visual tree in a Silverlight or Windows Phone 7 application (actually more recently I found myself doing this in WPF as well).  This allows access to details that aren’t exposed directly by some controls.  A good example of this sort of requirement is found in the “Restoring exact scroll position of a listbox in Windows Phone 7”  question on stackoverflow.  This required that the scroll position of the scroll viewer internal to a listbox be accessed. A caveat One caveat here is that we should seriously challenge the need for this burrowing since it may indicate that there is a design problem.  Burrowing into the visual tree or indeed burrowing out to containing ancestors could represent significant coupling between module boundaries and that generally isn’t a good idea. Why isn’t this idea just not cast aside as a no-no?  Well the whole concept of a “Templated Control”, which are in extensive use in these applications, opens the coupling between the content of the visual tree and the internal code of a control.   For example, I can completely change the appearance and positioning of elements that make up a ComboBox.  The ComboBox control relies on specific template parts having set names of a specified type being present in my template.  Rightly or wrongly this does kind of give license to writing code that has similar coupling. Hasn’t this been done already? Yes it has.  There are number of blogs already out there with similar solutions.  In fact if you are using Silverlight toolkit the VisualTreeExtensions class already provides this feature.  However I prefer my specific code because of the simplicity principle I hold to.  Only write the minimum code necessary to give all the features needed.  In this case I add just two extension methods Ancestors and Descendents, note I don’t bother with “Get” or “Visual” prefixes.  Also I haven’t added Parent or Children methods nor additional “AndSelf” methods because all but Children is achievable with the addition of some other Linq methods.  I decided to give Descendents an additional overload for depth hence a depth of 1 is equivalent to Children but this overload is a little more flexible than simply Children. So here is the code:- VisualTreeEnumeration public static class VisualTreeEnumeration {     public static IEnumerable<DependencyObject> Descendents(this DependencyObject root, int depth)     {         int count = VisualTreeHelper.GetChildrenCount(root);         for (int i = 0; i < count; i++)         {             var child = VisualTreeHelper.GetChild(root, i);             yield return child;             if (depth > 0)             {                 foreach (var descendent in Descendents(child, --depth))                     yield return descendent;             }         }     }     public static IEnumerable<DependencyObject> Descendents(this DependencyObject root)     {         return Descendents(root, Int32.MaxValue);     }     public static IEnumerable<DependencyObject> Ancestors(this DependencyObject root)     {         DependencyObject current = VisualTreeHelper.GetParent(root);         while (current != null)         {             yield return current;             current = VisualTreeHelper.GetParent(current);         }     } }   Usage examples The following are some examples of how to combine the above extension methods with Linq to generate the other axis scenarios that tree traversal code might require. Missing Axis Scenarios var parent = control.Ancestors().Take(1).FirstOrDefault(); var children = control.Descendents(1); var previousSiblings = control.Ancestors().Take(1)     .SelectMany(p => p.Descendents(1).TakeWhile(c => c != control)); var followingSiblings = control.Ancestors().Take(1)     .SelectMany(p => p.Descendents(1).SkipWhile(c => c != control).Skip(1)); var ancestorsAndSelf = Enumerable.Repeat((DependencyObject)control, 1)     .Concat(control.Ancestors()); var descendentsAndSelf = Enumerable.Repeat((DependencyObject)control, 1)     .Concat(control.Descendents()); You might ask why I don’t just include these in the VisualTreeEnumerator.  I don’t on the principle of only including code that is actually needed.  If you find that one or more of the above  is needed in your code then go ahead and create additional methods.  One of the downsides to Extension methods is that they can make finding the method you actually want in intellisense harder. Here are some real world usage scenarios for these methods:- Real World Scenarios //Gets the internal scrollviewer of a ListBox ScrollViewer sv = someListBox.Descendents().OfType<ScrollViewer>().FirstOrDefault(); // Get all text boxes in current UserControl:- var textBoxes = this.Descendents().OfType<TextBox>(); // All UIElement direct children of the layout root grid:- var topLevelElements = LayoutRoot.Descendents(0).OfType<UIElement>(); // Find the containing `ListBoxItem` for a UIElement:- var container = elem.Ancestors().OfType<ListBoxItem>().FirstOrDefault(); // Seek a button with the name "PinkElephants" even if outside of the current Namescope:- var pinkElephantsButton = this.Descendents()     .OfType<Button>()     .FirstOrDefault(b => b.Name == "PinkElephants"); //Clear all checkboxes with the name "Selector" in a Treeview foreach (CheckBox checkBox in elem.Descendents()     .OfType<CheckBox>().Where(c => c.Name == "Selector")) {     checkBox.IsChecked = false; }   The last couple of examples above demonstrate a common requirement of finding controls that have a specific name.  FindName will often not find these controls because they exist in a different namescope. Hope you find this useful, if not I’m just glad to be able to link to this blog in future stackoverflow answers.

  Read the article

• On Reflector Pricing

  - by Nick Harrison

  I have heard a lot of outrage over Red Gate's decision to charge for Reflector. In the interest of full disclosure, I am a fan of Red Gate. I have worked with them on several usability tests. They also sponsor Simple Talk where I publish articles. They are a good company. I am also a BIG fan of Reflector. I have used it since Lutz originally released it. I have written my own add-ins. I have written code to host reflector and use its object model in my own code. Reflector is a beautiful tool. The care that Lutz took to incorporate extensibility is amazing. I have never had difficulty convincing my fellow developers that it is a wonderful tool. Almost always, once anyone sees it in action, it becomes their favorite tool. This wide spread adoption and usability has made it an icon and pivotal pillar in the DotNet community. Even folks with the attitude that if it did not come out of Redmond then it must not be any good, still love it. It is ironic to hear everyone clamoring for it to be released as open source. Reflector was never open source, it was free, but you never were able to peruse the source code and contribute your own changes. You could not even use Reflector to view the source code. From the very beginning, it was never anyone's intention for just anyone to examine the source code and make their own contributions aside from the add-in model. Lutz chose to hand over the reins to Red Gate because he believed that they would be able to build on his original vision and keep the product viable and effective. He did not choose to make it open source, hoping that the community would be up to the challenge. The simplicity and elegance may well have been lost with the "design by committee" nature of open source. Despite being a wonderful and beloved tool, Reflector cannot be an easy tool to maintain. Maybe because it is so wonderful and beloved, it is even more difficult to maintain. At any rate, we have high expectations. Reflector must continue to be able to reasonably disassemble every language construct that the framework and core languages dream up. We want it to be fast, and we also want it to continue to be simple to use. No small order. Red Gate tried to keep the core product free. Sadly there was not enough interest in the Pro version to subsidize the rest of the expenses. $35 is a reasonable cost, more than reasonable. I have read the blog posts and forum posts complaining about the time associated with getting the expense approved. I have heard people complain about the cost being unreasonable if you are a developer from certain countries. Let's do the math. How much of a productivity boost is Reflector? How many hours do you think it saves you in a typical project? The next question is a little easier if you are a contractor or a consultant, but what is your hourly rate? If you are not a contractor, you can probably figure out an hourly rate. How long does it take to get a return on your investment? The value added proposition is not a difficult one to make. I have read people clamoring that Red Gate sucks and is evil. They complain about broken promises and conflicts of interest. Relax! Red Gate is not evil. The world is not coming to an end. The sun will come up tomorrow. I am sure that Red Gate will come up with options for volume licensing or site licensing for companies that want to get a licensed copy for their entire team. Don't panic, and I am sure that many great improvements are on the horizon. Switching the UI to WPF and including a tabbed interface opens up lots of possibilities.

  Read the article

• Mixing Forms and Token Authentication in a single ASP.NET Application (the Details)

  - by Your DisplayName here!

  The scenario described in my last post works because of the design around HTTP modules in ASP.NET. Authentication related modules (like Forms authentication and WIF WS-Fed/Sessions) typically subscribe to three events in the pipeline – AuthenticateRequest/PostAuthenticateRequest for pre-processing and EndRequest for post-processing (like making redirects to a login page). In the pre-processing stage it is the modules’ job to determine the identity of the client based on incoming HTTP details (like a header, cookie, form post) and set HttpContext.User and Thread.CurrentPrincipal. The actual page (in the ExecuteHandler event) “sees” the identity that the last module has set. So in our case there are three modules in effect: FormsAuthenticationModule (AuthenticateRequest, EndRequest) WSFederationAuthenticationModule (AuthenticateRequest, PostAuthenticateRequest, EndRequest) SessionAuthenticationModule (AuthenticateRequest, PostAuthenticateRequest) So let’s have a look at the different scenario we have when mixing Forms auth and WS-Federation. Anoymous request to unprotected resource This is the easiest case. Since there is no WIF session cookie or a FormsAuth cookie, these modules do nothing. The WSFed module creates an anonymous ClaimsPrincipal and calls the registered ClaimsAuthenticationManager (if any) to transform it. The result (by default an anonymous ClaimsPrincipal) gets set. Anonymous request to FormsAuth protected resource This is the scenario where an anonymous user tries to access a FormsAuth protected resource for the first time. The principal is anonymous and before the page gets rendered, the Authorize attribute kicks in. The attribute determines that the user needs authentication and therefor sets a 401 status code and ends the request. Now execution jumps to the EndRequest event, where the FormsAuth module takes over. The module then converts the 401 to a redirect (302) to the forms login page. If authentication is successful, the login page sets the FormsAuth cookie.   FormsAuth authenticated request to a FormsAuth protected resource Now a FormsAuth cookie is present, which gets validated by the FormsAuth module. This cookie gets turned into a GenericPrincipal/FormsIdentity combination. The WS-Fed module turns the principal into a ClaimsPrincipal and calls the registered ClaimsAuthenticationManager. The outcome of that gets set on the context. Anonymous request to STS protected resource This time the anonymous user tries to access an STS protected resource (a controller decorated with the RequireTokenAuthentication attribute). The attribute determines that the user needs STS authentication by checking the authentication type on the current principal. If this is not Federation, the redirect to the STS will be made. After successful authentication at the STS, the STS posts the token back to the application (using WS-Federation syntax). Postback from STS authentication After the postback, the WS-Fed module finds the token response and validates the contained token. If successful, the token gets transformed by the ClaimsAuthenticationManager, and the outcome is a) stored in a session cookie, and b) set on the context. STS authenticated request to an STS protected resource This time the WIF Session authentication module kicks in because it can find the previously issued session cookie. The module re-hydrates the ClaimsPrincipal from the cookie and sets it.     FormsAuth and STS authenticated request to a protected resource This is kind of an odd case – e.g. the user first authenticated using Forms and after that using the STS. This time the FormsAuth module does its work, and then afterwards the session module stomps over the context with the session principal. In other words, the STS identity wins.   What about roles? A common way to set roles in ASP.NET is to use the role manager feature. There is a corresponding HTTP module for that (RoleManagerModule) that handles PostAuthenticateRequest. Does this collide with the above combinations? No it doesn’t! When the WS-Fed module turns existing principals into a ClaimsPrincipal (like it did with the FormsIdentity), it also checks for RolePrincipal (which is the principal type created by role manager), and turns the roles in role claims. Nice! But as you can see in the last scenario above, this might result in unnecessary work, so I would rather recommend consolidating all role work (and other claims transformations) into the ClaimsAuthenticationManager. In there you can check for the authentication type of the incoming principal and act accordingly. HTH

  Read the article

• My Feelings About Microsoft Surface

  - by Valter Minute

  Advice: read the title carefully, I’m talking about “feelings” and not about advanced technical points proved in a scientific and objective way I still haven’t had a chance to play with a MS Surface tablet (I would love to, of course) and so my ideas just came from reading different articles on the net and MS official statements. Remember also that the MVP motto begins with “Independent” (“Independent Experts. Real World Answers.”) and this is just my humble opinion about a product and a technology. I know that, being an MS MVP you can be called an “MS-fanboy”, I don’t care, I hope that people can appreciate my opinion, even if it doesn’t match theirs. The “Surface” brand can be confusing for techies that knew the “original” surface concept but I think that will be a fresh new brand name for most of the people out there. But marketing department are here to confuse people… so I can understand this “recycle” of an existing name. So Microsoft is entering the hardware arena… for me this is good news. Microsoft developed some nice hardware in the past: the xbox, zune (even if the commercial success was quite limited) and, last but not least, the two arc mices (old and new model) that I use and appreciate. In the past Microsoft worked with OEMs and that model lead to good and bad things. Good thing (for microsoft, at least) is market domination by windows-based PCs that only in the last years has been reduced by the return of the Mac and tablets. Google is also moving in the hardware business with its acquisition of Motorola, and Apple leveraged his control of both the hardware and software sides to develop innovative products. Microsoft can scare OEMs and make them fly away from windows (but where?) or just lead the pack, showing how devices should be designed to compete in the market and bring back some of the innovation that disappeared from recent PC products (look at the shelves of your favorite electronics store and try to distinguish a laptop between the huge mass of anonymous PCs on displays… only Macs shine out there…). Having to compete with MS “official” hardware will force OEMs to develop better product and bring back some real competition in a market that was ruled only by prices (the lower the better even when that means low quality) and no innovative features at all (when it was the last time that a new PC surprised you?). Moving into a new market is a big and risky move, but with Windows 8 Microsoft is playing a crucial move for its future, trying to be back in the innovation run against apple and google. MS can’t afford to fail this time. I saw the new devices (the WinRT and Pro) and the specifications are scarce, misleading and confusing. The first impression is that the device looks like an iPad with a nice keyboard cover… Using “HD” and “full HD” to define display resolution instead of using the real figures and reviving the “ClearType” brand (now dead on Win8 as reported here and missed by people who hate to read text on displays, like myself) without providing clear figures (couldn’t you count those damned pixels?) seems to imply that MS was caught by surprise by apple recent “retina” displays that brought very high definition screens on tablets.Also there are no specifications about the processors used (even if some sources report NVidia Tegra for the ARM tablet and i5 for the x86 one) and expected battery life (a critical point for tablets and the point that killed Windows7 x86 based tablets). Also nothing about the price, and this will be another critical point because other platform out there already provide lots of applications and have a good user base, if MS want to enter this market tablets pricing must be competitive. There are some expansion ports (SD and USB), so no fixed storage model (even if the specs talks about 32-64GB for RT and 128-256GB for pro). I like this and don’t like the apple model where flash memory (that it’s dirt cheap used in thumdrives or SD cards) is as expensive as gold (or cocaine to have a more accurate per gram measurement) when mounted inside a tablet/phone. For big files you’ll be able to use external media and an SD card could be used to store files that don’t require super-fast SSD-like access times, I hope. To be honest I really don’t like the marketplace model and the limitation of Windows RT APIs (no local database? from a company that based a good share of its success on VB6+Access!) and lack of desktop support on the ARM (even if the support is here and has been used to port office). It’s a step toward the consumer market (where competitors are making big money), but may impact enterprise (and embedded) users that may not appreciate Windows 8 new UI or the limitations of the new app model (if you aren’t connected you are dead ). Not having compatibility with the desktop will require brand new applications and honestly made all the CPU cycles spent to convert .NET IL into real machine code in the past like a huge waste of time… as soon as a new processor architecture is supported by Windows you still have to rewrite part of your application (and MS is pushing HTML5+JS and native code more than .NET in my perception). On the other side I believe that the development experience provided by Visual Studio is still miles (or kilometres) ahead of the competition and even the all-uppercase menu of VS2012 hasn’t changed this situation. The new metro UI got mixed reviews. On my side I should say that is very pleasant to use on a touch screen, I like the minimalist design (even if sometimes is too minimal and hides stuff that, in my opinion, should be visible) but I should also say that using it with mouse and keyboard is like trying to pick your nose with boxing gloves… Metro is also very interesting for embedded devices where touch screen usage is quite common and where having an application taking all the screen is the norm. For devices like kiosks, vending machines etc. this kind of UI can be a great selling point. I don’t need a new tablet (to be honest I’m pretty happy with my wife’s iPad and with my PC), but I may change my opinion after having a chance to play a little bit with those new devices and understand what’s hidden under all this mysterious and generic announcements and specifications!

  Read the article

• Rebuilding CoasterBuzz, Part II: Hot data objects

  - by Jeff

  This is the second post, originally from my personal blog, in a series about rebuilding one of my Web sites, which has been around for 12 years. More: Part I: Evolution, and death to WCF After the rush to get moving on stuff, I temporarily lost interest. I went almost two weeks without touching the project, in part because the next thing on my backlog was doing up a bunch of administrative pages. So boring. Unfortunately, because most of the site's content is user-generated, you need some facilities for editing data. CoasterBuzz has a database full of amusement parks and roller coasters. The entities enjoy the relationships that you would expect, though they're further defined by "instances" of a coaster, to define one that has moved between parks as one, with different names and operational dates. And of course, there are pictures and news items, too. It's not horribly complex, except when you have to account for a name change and display just the newest name. In all previous versions, data access was straight SQL. As so much of the old code was rooted in 2003, with some changes in 2008, there wasn't much in the way of ORM frameworks going on then. Let me rephrase that, I mostly wasn't interested in ORM's. Since that time, I used a little LINQ to SQL in some projects, and a whole bunch of nHibernate while at Microsoft. Through all of that experience, I have to admit that these frameworks are often a bigger pain in the ass than not. They're great for basic crud operations, but when you start having all kinds of exotic relationships, they get difficult, and generate all kinds of weird SQL under the covers. The black box can quickly turn into a black hole. Sometimes you end up having to build all kinds of new expertise to do things "right" with a framework. Still, despite my reservations, I used the newer version of Entity Framework, with the "code first" modeling, in a science project and I really liked it. Since it's just a right-click away with NuGet, I figured I'd give it a shot here. My initial effort was spent defining the context class, which requires a bit of work because I deviate quite a bit from the conventions that EF uses, starting with table names. Then throw some partial querying of certain tables (where you'll find image data), and you're splitting tables across several objects (navigation properties). I won't go into the details, because these are all things that are well documented around the Internet, but there was a minor learning curve there. The basics of reading data using EF are fantastic. For example, a roller coaster object has a park associated with it, as well as a number of instances (if it was ever relocated), and there also might be a big banner image for it. This is stupid easy to use because it takes one line of code in your repository class, and by the time you pass it to the view, you have a rich object graph that has everything you need to display stuff. Likewise, editing simple data is also, well, simple. For this goodness, thank the ASP.NET MVC framework. The UpdateModel() method on the controllers is very elegant. Remember the old days of assigning all kinds of properties to objects in your Webforms code-behind? What a time consuming mess that used to be. Even if you're not using an ORM tool, having hydrated objects come off the wire is such a time saver. Not everything is easy, though. When you have to persist a complex graph of objects, particularly if they were composed in the user interface with all kinds of AJAX elements and list boxes, it's not just a simple matter of submitting the form. There were a few instances where I ended up going back to "old-fashioned" SQL just in the interest of time. It's not that I couldn't do what I needed with EF, it's just that the efficiency, both my own and that of the generated SQL, wasn't good. Since EF context objects expose a database connection object, you can use that to do the old school ADO.NET stuff you've done for a decade. Using various extension methods from POP Forums' data project, it was a breeze. You just have to stick to your decision, in this case. When you start messing with SQL directly, you can't go back in the same code to messing with entities because EF doesn't know what you're changing. Not really a big deal. There are a number of take-aways from using EF. The first is that you write a lot less code, which has always been a desired outcome of ORM's. The other lesson, and I particularly learned this the hard way working on the MSDN forums back in the day, is that trying to retrofit an ORM framework into an existing schema isn't fun at all. The CoasterBuzz database isn't bad, but there are design decisions I'd make differently if I were starting from scratch. Now that I have some of this stuff done, I feel like I can start to move on to the more interesting things on the backlog. There's a lot to do, but at least it's fun stuff, and not more forms that will be used infrequently.

  Read the article

• A Knights Tale

  - by Phil Factor

  There are so many lessons to be learned from the story of Knight Capital losing nearly half a billion dollars as a result of a deployment gone wrong. The Knight Capital Group (KCG N) was an American global financial services firm engaging in market making, electronic execution, and institutional sales and trading. According to the recent order (File No.3.15570) against Knight Capital by U.S. Securities and Exchange Commission?, Knight had, for many years used some software which broke up incoming “parent” orders into smaller “child” orders that were then transmitted to various exchanges or trading venues for execution. A tracking ‘cumulative quantity’ function counted the number of ‘child’ orders and stopped the process once the total of child orders matched the ‘parent’ and so the parent order had been completed. Back in the mists of time, some code had been added to it  which was excuted if a particular flag was set. It was called ‘power peg’ and seems to have had a similar design and purpose, but, one guesses, would have shared the same tracking function. This code had been abandoned in 2003, but never deleted. In 2005, The tracking function was moved to an earlier point in the main process. It would seem from the account that, from that point, had that flag ever been set, the old ‘Power Peg’ would have been executed like Godzilla bursting from the ice, making child orders without limit without any tracking function. It wasn’t, presumably because the software that set the flag was removed. In 2012, nearly a decade after ‘Power Peg’ was abandoned, Knight prepared a new module to their software to cope with the imminent Retail Liquidity Program (RLP) for the New York Stock Exchange. By this time, the flag had remained unused and someone made the fateful decision to reuse it, and replace the old ‘power peg’ code with this new RLP code. Had the two actions been done together in a single automated deployment, and the new deployment tested, all would have been well. It wasn’t. To quote… “Beginning on July 27, 2012, Knight deployed the new RLP code in SMARS in stages by placing it on a limited number of servers in SMARS on successive days. During the deployment of the new code, however, one of Knight’s technicians did not copy the new code to one of the eight SMARS computer servers. Knight did not have a second technician review this deployment and no one at Knight realized that the Power Peg code had not been removed from the eighth server, nor the new RLP code added. Knight had no written procedures that required such a review.” (para 15) “On August 1, Knight received orders from broker-dealers whose customers were eligible to participate in the RLP. The seven servers that received the new code processed these orders correctly. However, orders sent with the repurposed flag to the eighth server triggered the defective Power Peg code still present on that server. As a result, this server began sending child orders to certain trading centers for execution. Because the cumulative quantity function had been moved, this server continuously sent child orders, in rapid sequence, for each incoming parent order without regard to the number of share executions Knight had already received from trading centers. Although one part of Knight’s order handling system recognized that the parent orders had been filled, this information was not communicated to SMARS.” (para 16) SMARS routed millions of orders into the market over a 45-minute period, and obtained over 4 million executions in 154 stocks for more than 397 million shares. By the time that Knight stopped sending the orders, Knight had assumed a net long position in 80 stocks of approximately $3.5 billion and a net short position in 74 stocks of approximately $3.15 billion. Knight’s shares dropped more than 20% after traders saw extreme volume spikes in a number of stocks, including preferred shares of Wells Fargo (JWF) and semiconductor company Spansion (CODE). Both stocks, which see roughly 100,000 trade per day, had changed hands more than 4 million times by late morning. Ultimately, Knight lost over $460 million from this wild 45 minutes of trading. Obviously, I’m interested in all this because, at one time, I used to write trading systems for the City of London. Obviously, the US SEC is in a far better position than any of us to work out the failings of Knight’s IT department, and the report makes for painful reading. I can’t help observing, though, that even with the breathtaking mistakes all along the way, that a robust automated deployment process that was ‘all-or-nothing’, and tested from soup to nuts would have prevented the disaster. The report reads like a Greek Tragedy. All the way along one wants to shout ‘No! not that way!’ and ‘Aargh! Don’t do it!’. As the tragedy unfolds, the audience weeps for the players, trapped by a cruel fate. All application development and deployment requires defense in depth. All IT goes wrong occasionally, but if there is a culture of defensive programming throughout, the consequences are usually containable. For financial systems, these defenses are required by statute, and ignored only by the foolish. Knight’s mistakes weren’t made by just one hapless sysadmin, but were progressive errors by an  IT culture spanning at least ten years.  One can spell these out, but I think they’re obvious. One can only hope that the industry studies what happened in detail, learns from the mistakes, and draws the right conclusions.

  Read the article

• 2D Particle Explosion

  - by TheBroodian

  I'm developing a 2D action game, and in said game I've given my primary character an ability he can use to throw a fireball. I'm trying to design an effect so that when said fireball collides (be it with terrain or with an enemy) that the fireball will explode. For the explosion effect I've created a particle that once placed into game space will follow random, yet autonomic behavior based on random variables. Here is my question: When I generate my explosion (essentially 90 of these particles) I get one of two behaviors, 1) They are all generated with the same random variables, and don't resemble an explosion at all, more like a large mass of clumped sprites that all follow the same randomly generated path. 2) If I assign each particle a unique seed to its random number generator, they are a little bit -more- spread out, yet clumping is still visible (they seem to fork out into 3 different directions) Does anybody have any tips for producing particle-based 2D explosions? I'll include the code for my particle and the event I'm generating them in. Fire particle class: public FireParticle(xTile.Dimensions.Location StartLocation, ContentManager content) { worldLocation = StartLocation; fireParticleAnimation = new FireParticleAnimation(content); random = new Random(); int rightorleft = random.Next(0, 3); int upordown = random.Next(1, 3); int xVelocity = random.Next(0, 101); int yVelocity = random.Next(0, 101); Vector2 tempVector2 = new Vector2(0,0); if (rightorleft == 1) { tempVector2 = new Vector2(xVelocity, tempVector2.Y); } else if (rightorleft == 2) { tempVector2 = new Vector2(-xVelocity, tempVector2.Y); } if (upordown == 1) { tempVector2 = new Vector2(tempVector2.X, -yVelocity); } else if (upordown == 2) { tempVector2 = new Vector2(tempVector2.X, yVelocity); } velocity = tempVector2; scale = random.Next(1, 11); upwardForce = -10; dead = false; } public FireParticle(xTile.Dimensions.Location StartLocation, ContentManager content, int seed) { worldLocation = StartLocation; fireParticleAnimation = new FireParticleAnimation(content); random = new Random(seed); int rightorleft = random.Next(0, 3); int upordown = random.Next(1, 3); int xVelocity = random.Next(0, 101); int yVelocity = random.Next(0, 101); Vector2 tempVector2 = new Vector2(0, 0); if (rightorleft == 1) { tempVector2 = new Vector2(xVelocity, tempVector2.Y); } else if (rightorleft == 2) { tempVector2 = new Vector2(-xVelocity, tempVector2.Y); } if (upordown == 1) { tempVector2 = new Vector2(tempVector2.X, -yVelocity); } else if (upordown == 2) { tempVector2 = new Vector2(tempVector2.X, yVelocity); } velocity = tempVector2; scale = random.Next(1, 11); upwardForce = -10; dead = false; } #endregion #region Update and Draw public void Update(GameTime gameTime) { elapsed = (float)gameTime.ElapsedGameTime.TotalSeconds; fireParticleAnimation.Update(gameTime); Vector2 moveAmount = velocity * elapsed; xTile.Dimensions.Location newPosition = new xTile.Dimensions.Location(worldLocation.X + (int)moveAmount.X, worldLocation.Y + (int)moveAmount.Y); worldLocation = newPosition; velocity.Y += upwardForce; if (fireParticleAnimation.finishedPlaying) { dead = true; } } public void Draw(SpriteBatch spriteBatch) { spriteBatch.Draw( fireParticleAnimation.image.Image, new Rectangle((int)drawLocation.X, (int)drawLocation.Y, scale, scale), fireParticleAnimation.image.SizeAndsource, Color.White * fireParticleAnimation.image.Alpha); } Fireball explosion event: public override void Update(GameTime gameTime) { if (enabled) { float elapsed = (float)gameTime.ElapsedGameTime.TotalSeconds; foreach (Heart_of_Fire.World_Objects.Particles.FireParticle particle in explosionParticles.ToList()) { particle.Update(gameTime); if (particle.Dead) { explosionParticles.Remove(particle); } } collisionRectangle = new Microsoft.Xna.Framework.Rectangle((int)wrldPstn.X, (int)wrldPstn.Y, 5, 5); explosionCheck = exploded; if (!exploded) { coreGraphic.Update(gameTime); tailGraphic.Update(gameTime); Vector2 moveAmount = velocity * elapsed; moveAmount = horizontalCollision(moveAmount, layer); moveAmount = verticalCollision(moveAmount, layer); Vector2 newPosition = new Vector2(wrldPstn.X + moveAmount.X, wrldPstn.Y + moveAmount.Y); if (hasCollidedHorizontally || hasCollidedVertically) { exploded = true; } wrldPstn = newPosition; worldLocation = new xTile.Dimensions.Location((int)wrldPstn.X, (int)wrldPstn.Y); } if (explosionCheck != exploded) { for (int i = 0; i < 90; i++) { explosionParticles.Add(new World_Objects.Particles.FireParticle( new Location( collisionRectangle.X + random.Next(0, 6), collisionRectangle.Y + random.Next(0, 6)), contentMgr)); } } if (exploded && explosionParticles.Count() == 0) { //enabled = false; } } }

  Read the article

• Proxied calls not working as expected

  - by AndyH

  I have been modifying an application to have a cleaner client/server split to allow for load splitting and resource sharing etc. Everything is written to an interface so it was easy to add a remoting layer to the interface using a proxy. Everything worked fine. The next phase was to add a caching layer to the interface and again this worked fine and speed was improved but not as much as I would have expected. On inspection it became very clear what was going on. I feel sure that this behavior has been seen many times before and there is probably a design pattern to solve the problem but it eludes me and I'm not even sure how to describe it. It is easiest explained with an example. Let's imagine the interface is interface IMyCode { List<IThing> getLots( List<String> ); IThing getOne( String id ); } The getLots() method calls getOne() and fills up the list before returning. The interface is implemented at the client which is proxied to a remoting client which then calls the remoting server which in turn calls the implementation at the server. At the client and the server layers there is also a cache. So we have :- Client interface | Client cache | Remote client | Remote server | Server cache | Server interface If we call getOne("A") at the client interface, the call is passed to the client cache which faults. This then calls the remote client which passes the call to the remote server. This then calls the server cache which also faults and so the call is eventually passed to the server interface which actually gets the IThing. In turn the server cache is filled and finally the client cache also. If getOne("A") is again called at the client interface the client cache has the data and it gets returned immediately. If a second client called getOne("B") it would fill the server cache with "B" as well as it's own client cache. Then, when the first client calls getOne("B") the client cache faults but the server cache has the data. This is all as one would expect and works well. Now lets call getLots( [ "C", "D" ] ). This works as you would expect by calling getOne() twice but there is a subtlety here. The call to getLots() cannot directly make use of the cache. Therefore the sequence is to call the client interface which in turn calls the remote client, then the remote server and eventually the server interface. This then calls getOne() to fill the list before returning. The problem is that the getOne() calls are being satisfied at the server when ideally they should be satisfied at the client. If you imagine that the client/server link is really slow then it becomes clear why the client call is more efficient than the server call once the client cache has the data. This example is contrived to illustrate the point. The more general problem is that you cannot just keep adding proxied layers to an interface and expect it to work as you would imagine. As soon as the call goes 'through' the proxy any subsequent calls are on the proxied side rather than 'self' side. Have I failed to learn or not learned something correctly? All this is implemented in Java and I haven't used EJBs. It seems that the example may be confusing. The problem is nothing to do with cache efficiencies. It is more to do with an illusion created by the use of proxies or AOP techniques in general. When you have an object whose class implements an interface there is an assumption that a call on that object might make further calls on that same object. For example, public String getInternalString() { return InetAddress.getLocalHost().toString(); } public String getString() { return getInternalString(); } If you get an object and call getString() the result depends where the code is running. If you add a remoting proxy to the class then the result could be different for calls to getString() and getInternalString() on the same object. This is because the initial call gets 'deproxied' before the actual method is called. I find this not only confusing but I wonder how I can control this behavior especially as the use of the proxy may be by a third party. The concept is fine but the practice is certainly not what I expected. Have I missed the point somewhere?

  Read the article

• The Best BPM Journey: More Exciting Destinations with Process Accelerators

  - by Cesare Rotundo

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Oracle Open World (OOW) earlier this month has been a great occasion to discuss with our BPM customers. It was interesting to hear definite patterns emerging from those conversations: “BPM is a journey”, “experiences to share”, “our organization now understands what BPM is”, and my favorite (with some caveats): “BPM is like wine tasting, once you start, you want to try more”. These customers have started their journey, climbed up the learning curve, and reached a vantage point that allows them to see their next BPM destination. They see the next few processes they are going to tackle and improve with BPM. These processes/destinations target both horizontal processes where BPM replaces or coordinates manual activities, and critical industry processes that the company needs to improve to compete and deliver increasing value. Each new destination generates value, allowing the organization to reduce the cost of manual processes that were not supported by apps/custom development, and increase efficiency of end-to-end processes partially covered by apps/custom dev. The question we wanted to answer is how to help organizations experience deeper success with BPM, by increasing their awareness of the potential for reaching new targets, and equipping them with the right tools. We decided that we needed to identify destinations, and plot routes to show the fastest path to those destinations. In the end we want to enable customers to reach “Process Excellence”: continuously set new targets and consistently and efficiently reach them. The result is Oracle Process Accelerators (PA), solutions built using the rich functionality in Oracle BPM Suite. PAs offers a rapidly expanding list of exciting destinations. Our launch of the latest installment of Process Accelerators at Oracle Open World includes new Industry-focused solutions such as Public Sector Incident Reporting and Financial Services Loan Origination, and improved other horizontal PAs, including Travel Request Management, Document Routing and Approval, and Internal Service Requests. Just before OOW we had extended the Oracle deployment of Travel Request Management, riding the enthusiastic response from early adopters among travelers (employees), management and support (approvers). “Getting there first” means being among the first to extract value from the PA approach, while acquiring deeper insights into the customers’ perspective. This is especially noteworthy when it comes to PAs, a set of solutions designed to be quickly deployed and iteratively improved by customers. The OOW launch has generated immediate feedback from customers, non-customers, analysts, and partners. They all confirmed that both Business and IT at organizations benefit from PAs when it comes to exploring the potential for BPM to improve their business processes. PAs help customers visualize what can be done with BPM, and PAs are made to be extended: you can see your destination, change the path to fit your needs, and deploy. We're discovering new destinations/processes that the market wants us to support, generic enough across industries and within industries. We'll keep on building sets of requirements, deliver functional design, construct solutions using Oracle BPM, and test them not only functionally but for performance, scalability, clustering, making them robust, product-quality. Delivering BPM solutions with product-grade quality is the equivalent of following a tried-and-tested path on a map. Do you know of existing destinations in your industry? If yes, we can draw a path to innovative processes together.

  Read the article

• UK OUG Conference Highlights and Insights

  - by Richard Bingham

  As per my preemptive post, this was the first time the annual conference organized by the UK Oracle User Group (UKOUG) was split into two events, one for Oracle Applications and another in December for Oracle Technology. Apps13, as it was branded, was hailed as a success, with over 1000 registered attendees and three days of sessions, exhibition, round-tables and many other types of content. As this poster on their stand illustrates, the UKOUG is a strong community with popular participants from both big and small Oracle partners and customers. The venue was a more intimate setting than previous years also, allowing everyone to casually bump into those they hoped to. It gave a real feeling of an Apps Community. The main themes over the days where CRM and Customer Experience, HCM, and FIN/SCM. This allowed people to attend just one focused day if they wanted. In addition the Apps Transformation stream ran across all three days, offering insights, advice, and details on the newer product solutions like Fusion Applications.  Here are some of the key take-aways I got from the conference, specific to my role in Fusion Applications Developer Relations: User Experience continues to be a significant reason for adopting some of the newer application products available, with immediately obvious gains in user productivity and satisfaction reported by customers. Also this doesn't stop with the baked-in UX either, with their Design Patterns proving popular and indeed currently being extended to including things like extending on ADF mobile and customizing the Simplified UI. More on this to come from us soon. The executive sessions emphasized the "it's a journey" phrase, illustrating that modern business applications are powered by technologies such as Cloud, Mobile, Social and Big Data and these can be harnessed to help propel your organization forward. Indeed the emphasis is away from the traditional vendor prescribed linear applications road map, and towards plotting a course based on business priorities supported by a broad range of integrated solutions. To help with this several conference sessions demoed the new "Applications Navigator" tool, developed in partnership with OUG members, which offers a visual framework to help organizations plan their Oracle Applications investments around business and technology imperatives. Initial reaction was positive, especially as customers do not need to decipher Oracle's huge product catalog and embeds the best blend of proven and integrated applications solutions. We'll share more on this when it is generally available. Several sessions focused around explanations and interpretation of Oracle OpenWorld 2013, helping highlight the key Oracle Applications messages and directions. With a relative small percentage of conference attendees also at OpenWorld (from a show of hands) this was a popular way to distill the information available down into specific items of interest for the community. Please note the original OpenWorld 2013 content is still available for download but will not remain available forever (via the Oracle website OpenWorld Content Catalog > pick a session > see the PDF download). With the release of E-Business Suite 12.2 the move to develop and deploy on the Fusion Middleware stack becomes a reality for many Oracle Applications customers. This coupled with recent E-Business Suite features such as the Integrated SOA Gateway and the E-Business Suite SDK for Java, illustrates how the gap between the technologies and techniques involved in extending E-Business Suite and Fusion Applications is quickly narrowing. We'll see this merging continue to evolve going forwards. Getting started with Oracle Cloud Applications is actually easier than many customers expected, with a broad selection of both large and medium sized organizations explaining how they added new features to their existing Oracle Applications portfolios. New functionality available from Fusion HCM and CX are popular extensions that do not have to disrupt those core business services. Coexistence is the buzzword here, and the available integration is also simpler than many expected, commonly involving an initial setup data load, then regularly incremental synchronizations, often without a need for real-time constant communication between systems. With much of this pre-built already the implementation process is also quite rapid. With most people dressed in suits, we wanted to get the conversations going without the traditional english reserve, so we decided to make ourselves a bit more obvious, as the photo below shows. This seemed to be quite successful and helped those interested identify and approach us. Keep a look out for similar again. In fact if you're in the UK there is an "Apps Transformation Day" planned by the UKOUG for the 19th March 2014, with more details to follow. Again something we'll be sure to participate in. I am hoping to attend the next half of the UKOUG annual conference, Tech13, that focuses more on Oracle technology and where there is more likely to be larger attendance of those interested in the lower-level aspects of applications customization and development. If you're going, let me know and maybe we can meet up.

  Read the article

• OIM 11g - Multi Valued attribute reconciliation of a child form

  - by user604275

  This topic gives a brief description on how we can do reconciliation of a child form attribute which is also multi valued from a flat file . The format of the flat file is (an example): ManagementDomain1|Entitlement1|DIRECTORY SERVER,EMAIL ManagementDomain2|Entitlement2|EMAIL PROVIDER INSTANCE - UMS,EMAIL VERIFICATION In OIM there will be a parent form for fields Management domain and Entitlement.Reconciliation will assign Servers ( which are multi valued) to corresponding Management  Domain and Entitlement .In the flat file , multi valued fields are seperated by comma(,). In the design console, Create a form with 'Server Name' as a field and make it a child form . Open the corresponding Resource Object and add this field for reconcilitaion.While adding , choose 'Multivalued' check box. (please find attached screen shot on how to add it , Child Table.docx) Open process definiton and add child form fields for recociliation. Please click on the 'Create Reconcilitaion Profile' buttton on the resource object tab. The API methods used for child form reconciliation are : 1.           reconEventKey =   reconOpsIntf.createReconciliationEvent(resObjName, reconData,                                                            false); ·                                    ‘False’  here tells that we are creating the recon for a child table . 2.               2.       reconOpsIntf.providingAllMultiAttributeData(reconEventKey, RECON_FIELD_IN_RO, true);                RECON_FIELD_IN_RO is the field that we added in the Resource Object while adding for reconciliation, please refer the screen shot) 3.    reconOpsIntf.addDirectBulkMultiAttributeData(reconEventKey,RECON_FIELD_IN_RO, bulkChildDataMapList);                 bulkChildDataMapList  is coded as below :                 List<Map> bulkChildDataMapList = new ArrayList<Map>();                   for (int i = 0; i < stokens.length; i++) {                            Map<String, String> attributeMap = new HashMap<String, String>();                           String serverName = stokens[i].toUpperCase();                           attributeMap.put("Server Name", stokens[i]);                           bulkChildDataMapList.add(attributeMap);                         } 4                  4.       reconOpsIntf.finishReconciliationEvent(reconEventKey); 5.       reconOpsIntf.processReconciliationEvent(reconEventKey); Now, we have to register the plug-in, import metadata into MDS and then create a scheduled job to execute which will run the reconciliation.

  Read the article

• Navigation in a #WP7 application with MVVM Light

  - by Laurent Bugnion

  In MVVM applications, it can be a bit of a challenge to send instructions to the view (for example a page) from a viewmodel. Thankfully, we have good tools at our disposal to help with that. In his excellent series “MVVM Light Toolkit soup to nuts”, Jesse Liberty proposes one approach using the MVVM Light messaging infrastructure. While this works fine, I would like to show here another approach using what I call a “view service”, i.e. an abstracted service that is invoked from the viewmodel, and implemented on the view. Multiple kinds of view services In fact, I use view services quite often, and even started standardizing them for the Windows Phone 7 applications I work on. If there is interest, I will be happy to show other such view services, for example Animation services, responsible to start/stop animations on the view. Dialog service, in charge of displaying messages to the user and gathering feedback. Navigation service, in charge of navigating to a given page directly from the viewmodel. In this article, I will concentrate on the navigation service. The INavigationService interface In most WP7 apps, the navigation service is used in quite a straightforward way. We want to: Navigate to a given URI. Go back. Be notified when a navigation is taking place, and be able to cancel. The INavigationService interface is quite simple indeed: public interface INavigationService { event NavigatingCancelEventHandler Navigating; void NavigateTo(Uri pageUri); void GoBack(); } Obviously, this interface can be extended if necessary, but in most of the apps I worked on, I found that this covers my needs. The NavigationService class It is possible to nicely pack the navigation service into its own class. To do this, we need to remember that all the PhoneApplicationPage instances use the same instance of the navigation service, exposed through their NavigationService property. In fact, in a WP7 application, it is the main frame (RootFrame, of type PhoneApplicationFrame) that is responsible for this task. So, our implementation of the NavigationService class can leverage this. First the class will grab the PhoneApplicationFrame and store a reference to it. Also, it registers a handler for the Navigating event, and forwards the event to the listening viewmodels (if any). Then, the NavigateTo and the GoBack methods are implemented. They are quite simple, because they are in fact just a gateway to the PhoneApplicationFrame. The whole class is as follows: public class NavigationService : INavigationService { private PhoneApplicationFrame _mainFrame; public event NavigatingCancelEventHandler Navigating; public void NavigateTo(Uri pageUri) { if (EnsureMainFrame()) { _mainFrame.Navigate(pageUri); } } public void GoBack() { if (EnsureMainFrame() && _mainFrame.CanGoBack) { _mainFrame.GoBack(); } } private bool EnsureMainFrame() { if (_mainFrame != null) { return true; } _mainFrame = Application.Current.RootVisual as PhoneApplicationFrame; if (_mainFrame != null) { // Could be null if the app runs inside a design tool _mainFrame.Navigating += (s, e) => { if (Navigating != null) { Navigating(s, e); } }; return true; } return false; } } Exposing URIs I find that it is a good practice to expose each page’s URI as a constant. In MVVM Light applications, a good place to do that is the ViewModelLocator, which already acts like a central point of setup for the views and their viewmodels. Note that in some cases, it is necessary to expose the URL as a string, for instance when a query string needs to be passed to the view. So for example we could have: public static readonly Uri MainPageUri = new Uri("/MainPage.xaml", UriKind.Relative); public const string AnotherPageUrl = "/AnotherPage.xaml?param1={0}&param2={1}"; Creating and using the NavigationService Normally, we only need one instance of the NavigationService class. In cases where you use an IOC container, it is easy to simply register a singleton instance. For example, I am using a modified version of a super simple IOC container, and so I can register the navigation service as follows: SimpleIoc.Register<INavigationService, NavigationService>(); Then, it can be resolved where needed with: SimpleIoc.Resolve<INavigationService>(); Or (more frequently), I simply declare a parameter on the viewmodel constructor of type INavigationService and let the IOC container do its magic and inject the instance of the NavigationService when the viewmodel is created. On supported platforms (for example Silverlight 4), it is also possible to use MEF. Or, of course, we can simply instantiate the NavigationService in the ViewModelLocator, and pass this instance as a parameter of the viewmodels’ constructor, injected as a property, etc… Once the instance has been passed to the viewmodel, it can be used, for example with: NavigationService.NavigateTo(ViewModelLocator.ComparisonPageUri); Testing Thanks to the INavigationService interface, navigation can be mocked and tested when the viewmodel is put under unit test. Simply implement and inject a mock class, and assert that the methods are called as they should by the viewmodel. Conclusion As usual, there are multiple ways to code a solution answering your needs. I find that view services are a really neat way to delegate view-specific responsibilities such as animation, dialogs and of course navigation to other classes through an abstracted interface. In some cases, such as the NavigationService class exposed here, it is even possible to standardize the implementation and pack it in a class library for reuse. I hope that this sample is useful! Happy coding. Laurent   Laurent Bugnion (GalaSoft) Subscribe | Twitter | Facebook | Flickr | LinkedIn

  Read the article

• Coherence Data Guarantees for Data Reads - Basic Terminology

  - by jpurdy

  When integrating Coherence into applications, each application has its own set of requirements with respect to data integrity guarantees. Developers often describe these requirements using expressions like "avoiding dirty reads" or "making sure that updates are transactional", but we often find that even in a small group of people, there may be a wide range of opinions as to what these terms mean. This may simply be due to a lack of familiarity, but given that Coherence sits at an intersection of several (mostly) unrelated fields, it may be a matter of conflicting vocabularies (e.g. "consistency" is similar but different in transaction processing versus multi-threaded programming). Since almost all data read consistency issues are related to the concept of concurrency, it is helpful to start with a definition of that, or rather what it means for two operations to be concurrent. Rather than implying that they occur "at the same time", concurrency is a slightly weaker statement -- it simply means that it can't be proven that one event precedes (or follows) the other. As an example, in a Coherence application, if two client members mutate two different cache entries sitting on two different cache servers at roughly the same time, it is likely that one update will precede the other by a significant amount of time (say 0.1ms). However, since there is no guarantee that all four members have their clocks perfectly synchronized, and there is no way to precisely measure the time it takes to send a given message between any two members (that have differing clocks), we consider these to be concurrent operations since we can not (easily) prove otherwise. So this leads to a question that we hear quite frequently: "Are the contents of the near cache always synchronized with the underlying distributed cache?". It's easy to see that if an update on a cache server results in a message being sent to each near cache, and then that near cache being updated that there is a window where the contents are different. However, this is irrelevant, since even if the application reads directly from the distributed cache, another thread update the cache before the read is returned to the application. Even if no other member modifies a cache entry prior to the local near cache entry being updated (and subsequently read), the purpose of reading a cache entry is to do something with the result, usually either displaying for consumption by a human, or by updating the entry based on the current state of the entry. In the former case, it's clear that if the data is updated faster than a human can perceive, then there is no problem (and in many cases this can be relaxed even further). For the latter case, the application must assume that the value might potentially be updated before it has a chance to update it. This almost aways the case with read-only caches, and the solution is the traditional optimistic transaction pattern, which requires the application to explicitly state what assumptions it made about the old value of the cache entry. If the application doesn't want to bother stating those assumptions, it is free to lock the cache entry prior to reading it, ensuring that no other threads will mutate the entry, a pessimistic approach. The optimistic approach relies on what is sometimes called a "fuzzy read". In other words, the application assumes that the read should be correct, but it also acknowledges that it might not be. (I use the qualifier "sometimes" because in some writings, "fuzzy read" indicates the situation where the application actually sees an original value and then later sees an updated value within the same transaction -- however, both definitions are roughly equivalent from an application design perspective). If the read is not correct it is called a "stale read". Going back to the definition of concurrency, it may seem difficult to precisely define a stale read, but the practical way of detecting a stale read is that is will cause the encompassing transaction to roll back if it tries to update that value. The pessimistic approach relies on a "coherent read", a guarantee that the value returned is not only the same as the primary copy of that value, but also that it will remain that way. In most cases this can be used interchangeably with "repeatable read" (though that term has additional implications when used in the context of a database system). In none of cases above is it possible for the application to perform a "dirty read". A dirty read occurs when the application reads a piece of data that was never committed. In practice the only way this can occur is with multi-phase updates such as transactions, where a value may be temporarily update but then withdrawn when a transaction is rolled back. If another thread sees that value prior to the rollback, it is a dirty read. If an application uses optimistic transactions, dirty reads will merely result in a lack of forward progress (this is actually one of the main risks of dirty reads -- they can be chained and potentially cause cascading rollbacks). The concepts of dirty reads, fuzzy reads, stale reads and coherent reads are able to describe the vast majority of requirements that we see in the field. However, the important thing is to define the terms used to define requirements. A quick web search for each of the terms in this article will show multiple meanings, so I've selected what are generally the most common variations, but it never hurts to state each definition explicitly if they are critical to the success of a project (many applications have sufficiently loose requirements that precise terminology can be avoided).

  Read the article

• Collaborative Whiteboard using WebSocket in GlassFish 4 - Text/JSON and Binary/ArrayBuffer Data Transfer (TOTD #189)

  - by arungupta

  This blog has published a few blogs on using JSR 356 Reference Implementation (Tyrus) as its integrated in GlassFish 4 promoted builds. TOTD #183: Getting Started with WebSocket in GlassFish TOTD #184: Logging WebSocket Frames using Chrome Developer Tools, Net-internals and Wireshark TOTD #185: Processing Text and Binary (Blob, ArrayBuffer, ArrayBufferView) Payload in WebSocket TOTD #186: Custom Text and Binary Payloads using WebSocket One of the typical usecase for WebSocket is online collaborative games. This Tip Of The Day (TOTD) explains a sample that can be used to build such games easily. The application is a collaborative whiteboard where different shapes can be drawn in multiple colors. The shapes drawn on one browser are automatically drawn on all other peer browsers that are connected to the same endpoint. The shape, color, and coordinates of the image are transfered using a JSON structure. A browser may opt-out of sharing the figures. Alternatively any browser can send a snapshot of their existing whiteboard to all other browsers. Take a look at this video to understand how the application work and the underlying code. The complete sample code can be downloaded here. The code behind the application is also explained below. The web page (index.jsp) has a HTML5 Canvas as shown: <canvas id="myCanvas" width="150" height="150" style="border:1px solid #000000;"></canvas> And some radio buttons to choose the color and shape. By default, the shape, color, and coordinates of any figure drawn on the canvas are put in a JSON structure and sent as a message to the WebSocket endpoint. The JSON structure looks like: { "shape": "square", "color": "#FF0000", "coords": { "x": 31.59999942779541, "y": 49.91999053955078 }} The endpoint definition looks like: @WebSocketEndpoint(value = "websocket",encoders = {FigureDecoderEncoder.class},decoders = {FigureDecoderEncoder.class})public class Whiteboard { As you can see, the endpoint has decoder and encoder registered that decodes JSON to a Figure (a POJO class) and vice versa respectively. The decode method looks like: public Figure decode(String string) throws DecodeException { try { JSONObject jsonObject = new JSONObject(string); return new Figure(jsonObject); } catch (JSONException ex) { throw new DecodeException("Error parsing JSON", ex.getMessage(), ex.fillInStackTrace()); }} And the encode method looks like: public String encode(Figure figure) throws EncodeException { return figure.getJson().toString();} FigureDecoderEncoder implements both decoder and encoder functionality but thats purely for convenience. But the recommended design pattern is to keep them in separate classes. In certain cases, you may even need only one of them. On the client-side, the Canvas is initialized as: var canvas = document.getElementById("myCanvas");var context = canvas.getContext("2d");canvas.addEventListener("click", defineImage, false); The defineImage method constructs the JSON structure as shown above and sends it to the endpoint using websocket.send(). An instant snapshot of the canvas is sent using binary transfer with WebSocket. The WebSocket is initialized as: var wsUri = "ws://localhost:8080/whiteboard/websocket";var websocket = new WebSocket(wsUri);websocket.binaryType = "arraybuffer"; The important part is to set the binaryType property of WebSocket to arraybuffer. This ensures that any binary transfers using WebSocket are done using ArrayBuffer as the default type seem to be blob. The actual binary data transfer is done using the following: var image = context.getImageData(0, 0, canvas.width, canvas.height);var buffer = new ArrayBuffer(image.data.length);var bytes = new Uint8Array(buffer);for (var i=0; i<bytes.length; i++) { bytes[i] = image.data[i];}websocket.send(bytes); This comprehensive sample shows the following features of JSR 356 API: Annotation-driven endpoints Send/receive text and binary payload in WebSocket Encoders/decoders for custom text payload In addition, it also shows how images can be captured and drawn using HTML5 Canvas in a JSP. How could this be turned in to an online game ? Imagine drawing a Tic-tac-toe board on the canvas with two players playing and others watching. Then you can build access rights and controls within the application itself. Instead of sending a snapshot of the canvas on demand, a new peer joining the game could be automatically transferred the current state as well. Do you want to build this game ? I built a similar game a few years ago. Do somebody want to rewrite the game using WebSocket APIs ? :-) Many thanks to Jitu and Akshay for helping through the WebSocket internals! Here are some references for you: JSR 356: Java API for WebSocket - Specification (Early Draft) and Implementation (already integrated in GlassFish 4 promoted builds) Subsequent blogs will discuss the following topics (not necessary in that order) ... Error handling Interface-driven WebSocket endpoint Java client API Client and Server configuration Security Subprotocols Extensions Other topics from the API

  Read the article

< Previous Page | 553 554 555 556 557 558 559 560 561 562 563 564  | Next Page >