Search Results

Search found 27056 results on 1083 pages for 'build mode'.

Page 558/1083 | < Previous Page | 554 555 556 557 558 559 560 561 562 563 564 565  | Next Page >

  • "wrong fs type, bad option, bad superblock" error while mounting FAT Drives

    - by cshubhamrao
    I am unable to mount any fat32 or fat16 formatted usb disks under Ubuntu 13.10. The thing here to note is that it is happening only with fat formatted Disks. ntfs, ext formatted external usb disks work well (I tried formatting the same with ext4 and it worked) While mounting via nautilus: Error while mounting from terminal: root@shubham-pc:~# mount -t vfat /dev/sdc1 /media/shubham/n mount: wrong fs type, bad option, bad superblock on /dev/sdc1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so As suggested by the error: Output from dmesg | tail root@shubham-pc:~# dmesg | tail [ 3545.482598] scsi8 : usb-storage 1-1:1.0 [ 3546.481530] scsi 8:0:0:0: Direct-Access SanDisk Cruzer 1.26 PQ: 0 ANSI: 5 [ 3546.482373] sd 8:0:0:0: Attached scsi generic sg3 type 0 [ 3546.483758] sd 8:0:0:0: [sdc] 15633408 512-byte logical blocks: (8.00 GB/7.45 GiB) [ 3546.485254] sd 8:0:0:0: [sdc] Write Protect is off [ 3546.485262] sd 8:0:0:0: [sdc] Mode Sense: 43 00 00 00 [ 3546.488314] sd 8:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 3546.499820] sdc: sdc1 [ 3546.503388] sd 8:0:0:0: [sdc] Attached SCSI removable disk [ 3547.273396] FAT-fs (sdc1): IO charset iso8859-1 not found Output from fsck.vfat: root@shubham-pc:~# fsck.vfat /dev/sdc1 dosfsck 3.0.16, 01 Mar 2013, FAT32, LFN /dev/sdc1: 1 files, 1/1949978 clusters All normal Tried re-creating the whole partition table and then formatting as fat32 but to no avail so the possibility of corrupted drive is ruled out. Tried the same with around 4 Disks or so and all have the same things

    Read the article

  • How to display workflow related tasks in the item display page where the workflow is currently running on in SharePoint2013

    - by ybbest
    In one of the project, I need to display workflow related tasks in the item display page where the workflow is currently running on. To achieve this, I’d like to add the tasks list view web part and using the connected web part to achieve this.(ID=workflowitemid) However, to make it work I need to unhide the workflowitemid field in the task list, as it is hidden field and also cantogglehidden field is set to false. I need to use reflection to change the cantogglehidden field to true as it only has getter in the API and then I am able to unhide the field. You can download the script here. However, it is not ideal (make your environment not supported by Microsoft) to display tasks this way. Another way to display the related task is to use SharePoint designer solution with List view web part and data source. Here are the steps. 1. Create a new list display form as below 2. Edit the custom display form in advanced mode. 3. Find the PlaceHolderMain contentplace hoder and insert the DataView by choosing the associated workflow tasks list as below 4. Go to the List View Tools >> OPTIONS 5. Create a Parameter called workflowitemId Parameter which retrieve the value from the ID querystring as below 6. Create a filter based on UIVersion = workflowitemId as below ,we are going to change the UIVersion to WorkflowItemId property later as WorkflowItemId is a hidden field and cannot be selected from the wizard. 7. Replace UIVersion with WorkflowItemId in the caml for the XsltListViewWebPart. From: TO 8. Go to the new custom display page at http://yourserver/Lists/aa/CustomDisplayPage.aspx?ID=414, you will see the associated tasks are showing in the page. References: http://office.microsoft.com/en-us/sharepoint-designer-help/watch-this-design-a-document-review-workflow-solution-HA010256417.aspx (Video 12 and 13)

    Read the article

  • hdmi AC-3 audio broke after upgrading from 11.10 to 12.04.3

    - by Jim LastName
    I just updated my MythBuntu 11.10 to 12.04.3. Now, when I try to play 5.1 content (ripped DVD), my TV (and receiver) plays a "chattering" sound. I check my receiver and the digital dolby light isn't on--it's in PCM mode. So, either the audio is getting sent as AC-3, but the TV and receiver think it's PCM or the AC-3 audio got converted to multichannel PCM and they can't handle it. My setup: hdmi cable from htpc to TV. TV has an s/pdif output to my receiver. I know TV sends AC-3 audio out correctly because I see digital dolby light come on when I view a digital TV channel and PCM come on when I view an old analog channel. I can connect s/pdif from my htpc to my receiver and the digital dolby light comes on and it can decode the audio just fine. It's just not sending it right over hdmi. Now for some hints to the issue: I noticed in MythTV audio setup when I select alsa:hdmi.... the description only lists 2 channel PCM audio capability. speaker-test -Dhdmi:PCH -c6 errors about a bad channel count (only -c2 works). Finally, I tried vlc and it does the same chattering sound. These all make me think this isn't a MythTV issue, it's something lower than that. I think the best way to troubleshoot this is to start at the drivers and check each layer, one at a time all the way to alsa. I just don't know what the layers are and how to do it. So, I need to find some audio troubleshooting guide to assist me. Or, if one doesn't exist, I'd appreciate some steps. Thanks much, Jim

    Read the article

  • Friday Fun: Wake Up the Box

    - by Mysticgeek
    Another Friday and it’s time to waste the rest of your Friday playing a  fun flash game online. Today we take a look at a relaxing physic based puzzle game called Wake Up the Box. Wake Up the Box This goal of this game is to wake up the box character by attaching parts of existing wood objects in each stage. You can start a new game or continue your progress from where you left off. At the beginning you get a tutorial showing what you need to do to wake the box. You get wood parts and can attach them to other wood pieces but not metal or brick. After successfully waking up Mr. Box, you can go to the next level or restart a level at any time if your having problems figuring out the puzzle. Each level gets more difficult and the puzzles are more challenging. Wake Up the Box is a relaxing and challenging game that will allow you to have fun, not working on TPS reports until the whistle blows. Play Wake Up the Box at FreeWebArcade Similar Articles Productive Geek Tips Stop the Mouse From Waking Up Your Computer from Sleep ModeFix "Sleep Mode Randomly Waking Up" Issue in Windows VistaStop Your Mouse from Waking Up Your Windows 7 ComputerPrevent Windows Asking for a Password on Wake Up from Sleep/StandbyUse Sleep.FM to Wake Up with the Web TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Microsoft’s “How Do I ?” Videos Home Networks – How do they look like & the problems they cause Check Your IMAP Mail Offline In Thunderbird Follow Finder Finds You Twitter Users To Follow Combine MP3 Files Easily QuicklyCode Provides Cheatsheets & Other Programming Stuff

    Read the article

  • Improving SpriteBatch performance for tiles

    - by Richard Rast
    I realize this is a variation on what has got to be a common question, but after reading several (good answers) I'm no closer to a solution here. So here's my situation: I'm making a 2D game which has (among some other things) a tiled world, and so, drawing this world implies drawing a jillion tiles each frame (depending on resolution: it's roughly a 64x32 tile with some transparency). Now I want the user to be able to maximize the game (or fullscreen mode, actually, as its a bit more efficient) and instead of scaling textures (bleagh) this will just allow lots and lots of tiles to be shown at once. Which is great! But it turns out this makes upward of 2000 tiles on the screen each time, and this is framerate-limiting (I've commented out enough other parts of the game to make sure this is the bottleneck). It gets worse if I use multiple source rectangles on the same texture (I use a tilesheet; I believe changing textures entirely makes things worse), or if you tint the tiles, or whatever. So, the general question is this: What are some general methods for improving the drawing of thousands of repetitive sprites? Answers pertaining to XNA's SpriteBatch would be helpful but I'm equally happy with general theory. Also, any tricks pertaining to this situation in particular (drawing a tiled world efficiently) are also welcome. I really do want to draw all of them, though, and I need the SpriteMode.BackToFront to be active, because

    Read the article

  • Grub options are not visible on booting on Samsung ATIV Book 9 Lite running Ubuntu 14.04

    - by mjwittering
    I've managed to install Ubuntu 14.04 on my new Samsung ATIV Book 9 Lite ultrabook. After updating some configuratiosn in the UEFI installation was very easy. The only questions and issue I believe I'm still experience is when booting. I believe when the laptop would be displaying the grub boot options I see the following. There is a black screen with a purple border of 10px around the screen. I'd like to know how I can update my system so that I see the grub boot manager. I've run these commands: sudo cat /etc/default/grub # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" GRUB_CMDLINE_LINUX="" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" The command was not possible, sudo efibootmgr.

    Read the article

  • Should I swap from WCF to NserviceBus

    - by Matt Roberts
    We have a central server that sends and recieves messages from a number of PCs that are located on client networks in various locations. To facilitate this, currently I'm using WCF with TCPNetBindings, using duplex communication secured with certificates. Now, we have a number of issues with this - mainly that we are being asked to support "disconnected mode" (we need to be fault tolerant). From what I know, there is no simple way to do this using the WCF stack - we'd need to implement something and perhaps use msmq. I've been looking at NServiceBus lately, and from I can see it seems to fit the bill well - fault tolerance, messages can be sent over the internet via a simple http gateway, etc. I know it's well respected in the community, and I can see why from looking into it. So, my question is...Does employing NServiceBus sound like a sensible idea, or does anyone have any other suggestions / real world experience that relate to this? I guess I'm worried of introducing a new tech that I know relatively little about, and facing problems with things like securing it, setting everything up in a reliable way, gotchas along the way.. I'm also wary of "gold-plating" the architecture, and choosing something shiny that will end up bogging me down in implementation versus sticking with WCF and just making it work for me.. Thanks!

    Read the article

  • How to re-configure graphics from Intel integrated to Intel / ATI switchable?

    - by Bucic
    There are lots of 'how to get switchable graphics to work' guides but I found none on how to configure a system for switchable graphics operation on Ubuntu from the ground up, nor explaining the current driver situation for particular computer models (integrated+discrete combinations). Example: https://help.ubuntu.com/community/HybridGraphics My system being mature and on Intel integrated card also makes things complicated. System information: Ubuntu 12.04 amd64, installed clean with system configured to use only the integrated Intel card Lenovo Thinkpad T500 Intel GMA 4500MHD / ATI Mobility Radeon HD 3650 Current situation: Mature and up-to-date system with no configuration changes to what's given above. I've made a backup image of the system (Clonezilla) so regardless of what's written below let's assume it's our starting point. If something in What I have already tried is not clear you may as well diregard it. What I have already tried: Configuring BIOS to switchable graphics and: Installing Additional Hardware drivers - returned an error. Installing proprietary amd-driver-installer-12.6-legacy-x86.x86_64.run automatically - system starts to 'low-graphics mode'. Tried fixing as per https://help.ubuntu.com/community/BinaryDriverHowto/ATI#Manually_installing_Catalyst_12.6.2C_special_case_for_Intel.2BAC8-ATI_hybrid_graphics Got lost, gave up. Please note that while configuring BIOS for integrated graphics only is pretty straightforward, configuring for switchable graphics is not.

    Read the article

  • High load (and high temp) with idle processes

    - by Nanne
    I've got a semi-old laptop (toshiba satellite a110-228), that's appointed 'laptop for the kids' by my sister. I've installed ubuntu netbook (10.10) on it because of the lack-of memory and it seems to work fine, accept from some heat-issues. These where never a problem under windows. It looks like I've got something similar to this problem: Load is generally 1 or higher, sometimes its stuck at 0.80, but its way to high. Top/htop only show a couple of percentage CPU use (which isn't too shocking, as i'm not doing anything). At this point all the software is stock, and i'd like to keep it that way because its supposed to be the easy-to-maintain kids computer. Now I'd like to find out: What could be the cause of the high load? Could it be as this thread implies, some driver, are there other options to check? How could I see what is really keeping the system hot and bothered? How to check what runs, etc etc? I'd like to pinpoint the culprint. further steps to take for debugging? The big bad internet leads me to believe that it might be the graphics drivers. The laptop has an Intel 945M chipset, but that doesn't seem to be one of the problem childs in this manner (I read a lot abotu ATI drivers that need special isntall). I'd not only welcome hints to directly solve this (duh) but also help in starting to debug what is going on. I am really hesitant in installing an older kernel, as I want it to be stock, and easy upgradeable (because I don't live near it, it should run without me ;) ) As an afterthought: to keep the whole thing cooler, can I 'amp up' the fancontrol? Its only going "airplane" mode when the computer is 95 Celcius, which is a tad late for my taste. Top: powertop:

    Read the article

  • Asus Eee PC 1000HE wireless woes

    - by Vladimir Noobokov
    Ever since I have upgraded my Asus Eee PC 1000HE from Lucid 10.04 to Precise 12.04 I have been having issues with my wireless connections. At first I had wireless dropouts: I would be able to start using wireless, but then after a few minutes the wireless would stop working even though I was still connected to the network. Lately things turned worse: while I connect to my wireless network, it just never works. I tried all sorts of solutions on offer here and in other forums but none worked. At best I got the wireless to work up until I rebooted, at which point I would get the same symptoms again: the wireless network is there, but it's not really working. By now I tried so many different "solutions" I don't know where to start describing them; I have also reinstalled 12.04 several times, enough to make me lose faith in Ubuntu. Help here looks like my last resort. For the record, my Asus Eee PC 1000HE is equipped with an Atheros wireless card. I have reinstalled 12.04, ran all the suggested updates, and receive the following response when I type iwconfig in the terminal: lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"Arsenal" Mode:Managed Frequency:2.452 GHz Access Point: 00:04:ED:48:67:89 Bit Rate=1 Mb/s Tx-Power=16 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=70/70 Signal level=-29 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:27 Invalid misc:57 Missed beacon:0 eth0 no wireless extensions. Thanks in advance for any help that might be offered.

    Read the article

  • DIVIDE vs division operator in #dax

    - by Marco Russo (SQLBI)
    Alberto Ferrari wrote an interesting article about DIVIDE performance in DAX. This new function has been introduced in SQL Server Analysis Services 2012 SP1, so it is available also in Excel 2013 (which still doesn’t have other features/fixes introduced by following Cumulative Updates…). The idea that instead of writing: IF ( Sales[Quantity] <> 0, Sales[Amount] / Sales[Quantity], BLANK () ) you can write: DIVIDE ( Sales[Amount], Sales[Quantity] ) There is a third optional argument in DIVIDE that defines the result in case the denominator (second argument) is zero, and by default its value is BLANK, so I omitted the third argument in my example. Using DIVIDE is very important, especially when you use a measure in MDX (for example in an Excel PivotTable) because it raise the chance that the non empty evaluation for the result is evaluated in bulk mode instead of cell-by-cell. However, from a DAX point of view, you might find it’s better to use the standard division operator removing the IF statement. I suggest you to read Alberto’s article, because you will find that an expression applying a filter using FILTER is faster than using CALCULATE, which is against any rule of thumb you might have read until now! Again, this is not always true, and depends on many conditions – trying to simplify, we might say that for a simple calculation, the query plan generated by FILTER could be more efficient – but, as usual, it depends, and 90% of the times using FILTER instead of CALCULATE produces slower performance. Do not take anything for granted, and always check the query plan when performance are your first issue!

    Read the article

  • Need for gksudo for "Install new software" in eclipse

    - by Captain Giraffe
    I have been developing for android on eclipse for a while now, and my experience with the eclipse environment on Ubuntu10.10 has not been a smooth one. With the repo install of eclipse I have had to sudo eclipse to install the required components for android development. (a big red flag for me) I tried today to install updates for the eclipse and android platform and my eclipse installation seems to have broken horribly. I can no longer find and of the urls for new software if i gksudo it, if I run it in user mode it fails (as it always has) with permissions problems. I have chowned user:user all my eclipse and android related private/user files. This is a system running ubuntu 10.10 with gnome2.x. On my kubuntu 11.10 install it work a lot better. Is there an easy fix to this? Is the repo version of eclipse broken? Should I do a clean install for just my user? (if so can I retain my previously installed software? the installation process is very time consuming) I saw there was a previous post here recommending this for new installations.

    Read the article

  • Changing the connection factory JNDI dynamically in Ftp Adapter

    - by [email protected]
    Consider a usecase where you need to send the same file over to five different ftp servers. The first thought that might come to mind is to create five FtpAdapter references one for each connection-factory location. However, this is not the most optimal approach and this is exactly where "Dynamic Partner Links" come into play in 11g.    If you're running the adapter in managed mode, it would require you to configure the connection factory JNDI in the appserver console for the FtpAdapter. In the sample below, I have mapped the connection-factory JNDI location "eis/Ftp/FtpAdapter" with the ftp server running on localhost.           After you've configured the connection factory on your appserver, you will need to refer to the connection-factory JNDI in the jca artifact of your SCA process. In the example below, I've instructed the FTPOut reference to use the ftp server corresponding to "eis/Ftp/FtpAdapter".     The good news is that you can change this connection-factory location dynamically using jca header properties in both BPEL as well as Mediator service engines. In order to do so, the business scenario involving BPEL or Mediator would be required to use a reserved jca header property "jca.jndi" as shown below.     Similarly, for mediator, the mplan would look as shown below.       Things to remember while using dynamic partner links: 1) The connection factories must be pre-configured on the SOA server. In our BPEL example above, both "eis/Ftp/FtpAdater1" and "eis/Ftp/FtpAdater2" must be configured in the weblogic deployment descriptor for the FtpAdapter prior to deploying the scenario. 2) Dynamic Partner Links are applicable to outbound invocations only.    

    Read the article

  • KDE not loading without nomode tag in grub and bad resolution [migrated]

    - by fcole90
    I recently installed Linux Mint 13 KDE but it's not working fine. At first I had to use failsafe mode to boot because normal boot takes to a textual login. If I use normal boot and text login I'm not able to run KDE nor with kdm start neither with startx. kdm says that's already running. Instead X is not able to run because can't connect Xserver to display. If I stop kdm and starx again doesn't change anything. Now I edited the grub to load in nomode. In that way KDE loads but resolution is wrong and xrandr doesn't help, because if I do this: cvt 1366 768 it changes it to 1368: # 1368x768 59.88 Hz (CVT) hsync: 47.79 kHz; pclk: 85.25 MHz Modeline "1368x768_60.00" 85.25 1368 1440 1576 1784 768 771 781 798 -hsync +vsync I also installed bumblebee and nvidia drivers because of optimus technology.. It worked just to have fun with glxspheres but there isn't any gain on KDE.. This is lspci output: fabio@fabio-EasyNote-TS11HR ~ $ lspci |grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 540M] (rev ff My notebook is an EasyNote TS with NVIDIA GeForce GT 540M. Thank you in advance to anyone that may help!

    Read the article

  • Catch Me If You Can

    - by Knut Vatsendvik
    Suppose you have a Proxy based Web Service using Oracle Service Bus. In a stage in the request pipeline,  you are using a Publish action to publish the incoming message to a JMS queue using a Business Service. What if the outbound transport provider throws an exception (outside of your pipeline)? Is your pipeline able to catch the error with an error handler?? This situation could occur because of a faulty connection, suspended queue, or some other reason. Here is the Request Pipeline in our simple test case. With an Error Handler added to the message flow containing a simple Log action. By default, the Publish action will invoke the service in a fire and forget fashion. Therefore any exception that occurs in the outbound transport will go unnoticed as shown in the following Invocation Trace. So what now? In a message flow, you can apply a Routing Options action to modify any or all of the following properties in the outbound request: URI, Quality of Service, Mode, Retry parameters, Message Priority. Now add the Routing Options action to the Request Action as shown below. Click the Routing Options to display its properties in the Properties View. Select the QoS option to set the Quality of Service element. Select Exactly Once to override the default setting, and Republish the project. The invocation will now block until the message is completely processed. Trying the same test case as earlier generates the following Invocation Trace showing that the Error Handler is now triggered.

    Read the article

  • Problems with both LightDM and GDM using DisplayLink USB monitor

    - by Austin
    When I use LightDM, it will auto-login to desktop just fine. The only problem is Compiz doesn't work, and menus don't work. I can't right-click the desktop, and I can't select program menus in the top bar (I.e clicking "File" does nothing). When I use GDM, I only get a blank blue screen and the mouse cursor. I can't Ctrl+Alt+Backspace to restart, but I can Ctrl+Alt+F1 and Ctrl+Alt+F7 to switch modes. I don't think it's auto-logging me in, but I'm not sure. It plays the login screen noise. Will update with more information when I get home! EDIT: Okay, so I did a fresh install, just to ensure I hadn't borked something playing in the console. I reconfigured my setup as I did before, with the same results. Here's what I followed. The only difference is that instead of setting "vga=normal nomodeset" I set "GRUB_GFXPAYLOAD_LINUX = text". Also I only have the DisplayLink monitor configured in my xorg.conf file. At this point I'm using the open radeon driver, although I used the proprietary ati driver before. I'm not sure if I'm having a problem with: - X configuration - Graphics driver - DisplayLink driver - Unity - LightDM - Compiz - Or something else The resolution of the monitor is 800x480, 16bit. I tried setting a larger virtual resolution of 1200x720 (because the real resolution is lower than the recommended resolution), but it causes Ubuntu to boot into low graphics mode. When I get home I'm going to install the fglrx driver and see if it enables virtual resolutions, which may further enable my window manager to function properly.

    Read the article

  • Using a portable USB monitor in Ubuntu 13.04 (AOC e1649Fwu - DisplayLink)

    Having access to a little bit of IT hardware extravaganza isn't that easy here in Mauritius for exactly two reasons - either it is simply not available or it is expensive like nowhere. Well, by chance I came across an advert by a local hardware supplier and their offer of the week caught my attention - a portable USB monitor. Sounds cool, and the specs are okay as well. It's completely driven via USB 2.0, has a light weight, the dimensions would fit into my laptop bag and the resolution of 1366 x 768 pixels is okay for a second screen. Long story, short ending: I called them and only got to understand that they are out of stock - how convenient! Well, as usual I left some contact details and got the regular 'We call you back' answer. Surprisingly, I didn't receive a phone call as promised and after starting to complain via social media networks they finally came back to me with new units available - and *drum-roll* still the same price tag as promoted (and free delivery on top as one of their employees lives in Flic en Flac). Guess, it was a no-brainer to get at least one unit to fool around with. In worst case it might end up as image frame on the shelf or so... The usual suspects... Ubuntu first! Of course, the packing mentions only Windows or Mac OS as supported operating systems and without hesitation at all, I hooked up the device on my main machine running on Ubuntu 13.04. Result: Blackout... Hm, actually not the situation I was looking for but okay can't be too difficult to get this piece of hardware up and running. Following the output of syslogd (or dmesg if you prefer) the device has been recognised successfully but we got stuck in the initialisation phase. Oct 12 08:17:23 iospc2 kernel: [69818.689137] usb 2-4: new high-speed USB device number 5 using ehci-pciOct 12 08:17:23 iospc2 kernel: [69818.800306] usb 2-4: device descriptor read/64, error -32Oct 12 08:17:24 iospc2 kernel: [69819.043620] usb 2-4: New USB device found, idVendor=17e9, idProduct=4107Oct 12 08:17:24 iospc2 kernel: [69819.043630] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3Oct 12 08:17:24 iospc2 kernel: [69819.043636] usb 2-4: Product: e1649FwuOct 12 08:17:24 iospc2 kernel: [69819.043642] usb 2-4: Manufacturer: DisplayLinkOct 12 08:17:24 iospc2 kernel: [69819.043647] usb 2-4: SerialNumber: FJBD7HA000778Oct 12 08:17:24 iospc2 kernel: [69819.046073] hid-generic 0003:17E9:4107.0008: hiddev0,hidraw5: USB HID v1.10 Device [DisplayLink e1649Fwu] on usb-0000:00:1d.7-4/input1Oct 12 08:17:24 iospc2 mtp-probe: checking bus 2, device 5: "/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-4"Oct 12 08:17:24 iospc2 mtp-probe: bus: 2, device: 5 was not an MTP deviceOct 12 08:17:30 iospc2 kernel: [69825.411220] [drm] vendor descriptor length:17 data:17 5f 01 00 15 05 00 01 03 00 04Oct 12 08:17:30 iospc2 kernel: [69825.498778] udl 2-4:1.0: fb1: udldrmfb frame buffer deviceOct 12 08:17:30 iospc2 kernel: [69825.498786] [drm] Initialized udl 0.0.1 20120220 on minor 1Oct 12 08:17:30 iospc2 kernel: [69825.498909] usbcore: registered new interface driver udl The device has been recognised as USB device without any question and it is listed properly: # lsusb...Bus 002 Device 005: ID 17e9:4107 DisplayLink ... A quick and dirty research on the net gave me some hints towards the udlfb framebuffer device for USB DisplayLink devices. By default this kernel module is blacklisted $ less /etc/modprobe.d/blacklist-framebuffer.conf | grep udl#blacklist udlblacklist udlfb and it is recommended to load it manually. So, unloading the whole udl stack and giving udlfb a shot: Oct 12 08:22:31 iospc2 kernel: [70126.642809] usbcore: registered new interface driver udlfb But still no reaction on the external display which supposedly should have been on and green. Display okay? Test run on Windows Just to be on the safe side and to exclude any hardware related defects or whatsoever - you never know what happened during delivery. I moved the display to a new position on the opposite side of my laptop, installed the display drivers first in Windows Vista (I know, I know...) as recommended in the manual, and then finally hooked it up on that machine. Tada! Display has been recognised correctly and I have a proper choice between cloning and extending my desktop. Testing whether the display is working properly - using Windows Vista Okay, good to know that there is nothing wrong on the hardware side just software... Back to Ubuntu - Kernel too old Some more research on Google and various hits recommend that the original displaylink driver has been merged into the recent kernel development and one should manually upgrade the kernel image (and both header) packages for Ubuntu. At least kernel 3.9 or higher would be necessary, and so I went out to this URL: http://kernel.ubuntu.com/~kernel-ppa/mainline/ and I downloaded all the good stuff from the v3.9-raring directory. The installation itself is easy going via dpkg: $ sudo dpkg -i linux-image-3.9.0-030900-generic_3.9.0-030900.201304291257_amd64.deb$ sudo dpkg -i linux-headers-3.9.0-030900_3.9.0-030900.201304291257_all.deb$ sudo dpkg -i linux-headers-3.9.0-030900-generic_3.9.0-030900.201304291257_amd64.deb As with any kernel upgrades it is necessary to restart the system in order to use the new one. Said and done: $ uname -r3.9.0-030900-generic And now connecting the external display gives me the following output in /var/log/syslog: Oct 12 17:51:36 iospc2 kernel: [ 2314.984293] usb 2-4: new high-speed USB device number 6 using ehci-pciOct 12 17:51:36 iospc2 kernel: [ 2315.096257] usb 2-4: device descriptor read/64, error -32Oct 12 17:51:36 iospc2 kernel: [ 2315.337105] usb 2-4: New USB device found, idVendor=17e9, idProduct=4107Oct 12 17:51:36 iospc2 kernel: [ 2315.337115] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3Oct 12 17:51:36 iospc2 kernel: [ 2315.337122] usb 2-4: Product: e1649FwuOct 12 17:51:36 iospc2 kernel: [ 2315.337127] usb 2-4: Manufacturer: DisplayLinkOct 12 17:51:36 iospc2 kernel: [ 2315.337132] usb 2-4: SerialNumber: FJBD7HA000778Oct 12 17:51:36 iospc2 kernel: [ 2315.338292] udlfb: DisplayLink e1649Fwu - serial #FJBD7HA000778Oct 12 17:51:36 iospc2 kernel: [ 2315.338299] udlfb: vid_17e9&pid_4107&rev_0129 driver's dlfb_data struct at ffff880117e59000Oct 12 17:51:36 iospc2 kernel: [ 2315.338303] udlfb: console enable=1Oct 12 17:51:36 iospc2 kernel: [ 2315.338306] udlfb: fb_defio enable=1Oct 12 17:51:36 iospc2 kernel: [ 2315.338309] udlfb: shadow enable=1Oct 12 17:51:36 iospc2 kernel: [ 2315.338468] udlfb: vendor descriptor length:17 data:17 5f 01 0015 05 00 01 03 00 04Oct 12 17:51:36 iospc2 kernel: [ 2315.338473] udlfb: DL chip limited to 1500000 pixel modesOct 12 17:51:36 iospc2 kernel: [ 2315.338565] udlfb: allocated 4 65024 byte urbsOct 12 17:51:36 iospc2 kernel: [ 2315.343592] hid-generic 0003:17E9:4107.0009: hiddev0,hidraw5: USB HID v1.10 Device [DisplayLink e1649Fwu] on usb-0000:00:1d.7-4/input1Oct 12 17:51:36 iospc2 mtp-probe: checking bus 2, device 6: "/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-4"Oct 12 17:51:36 iospc2 mtp-probe: bus: 2, device: 6 was not an MTP deviceOct 12 17:51:36 iospc2 kernel: [ 2315.426583] udlfb: 1366x768 @ 59 Hz valid modeOct 12 17:51:36 iospc2 kernel: [ 2315.426589] udlfb: Reallocating framebuffer. Addresses will change!Oct 12 17:51:36 iospc2 kernel: [ 2315.428338] udlfb: 1366x768 @ 59 Hz valid modeOct 12 17:51:36 iospc2 kernel: [ 2315.428343] udlfb: set_par mode 1366x768Oct 12 17:51:36 iospc2 kernel: [ 2315.430620] udlfb: DisplayLink USB device /dev/fb1 attached. 1366x768 resolution. Using 4104K framebuffer memory Okay, that's looks more promising but still only blackout on the external screen... And yes, due to my previous modifications I swapped the blacklisted kernel modules: $ less /etc/modprobe.d/blacklist-framebuffer.conf | grep udlblacklist udl#blacklist udlfb Silly me! Okay, back to the original situation in which udl is allowed and udlfb blacklisted. Now, the logging looks similar to this and the screen shows those maroon-brown and azure-blue horizontal bars as described on other online resources. Oct 15 21:27:23 iospc2 kernel: [80934.308238] usb 2-4: new high-speed USB device number 5 using ehci-pciOct 15 21:27:23 iospc2 kernel: [80934.420244] usb 2-4: device descriptor read/64, error -32Oct 15 21:27:24 iospc2 kernel: [80934.660822] usb 2-4: New USB device found, idVendor=17e9, idProduct=4107Oct 15 21:27:24 iospc2 kernel: [80934.660832] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3Oct 15 21:27:24 iospc2 kernel: [80934.660838] usb 2-4: Product: e1649FwuOct 15 21:27:24 iospc2 kernel: [80934.660844] usb 2-4: Manufacturer: DisplayLinkOct 15 21:27:24 iospc2 kernel: [80934.660850] usb 2-4: SerialNumber: FJBD7HA000778Oct 15 21:27:24 iospc2 kernel: [80934.663391] hid-generic 0003:17E9:4107.0008: hiddev0,hidraw5: USB HID v1.10 Device [DisplayLink e1649Fwu] on usb-0000:00:1d.7-4/input1Oct 15 21:27:24 iospc2 mtp-probe: checking bus 2, device 5: "/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-4"Oct 15 21:27:24 iospc2 mtp-probe: bus: 2, device: 5 was not an MTP deviceOct 15 21:27:25 iospc2 kernel: [80935.742407] [drm] vendor descriptor length:17 data:17 5f 01 00 15 05 00 01 03 00 04Oct 15 21:27:25 iospc2 kernel: [80935.834403] udl 2-4:1.0: fb1: udldrmfb frame buffer deviceOct 15 21:27:25 iospc2 kernel: [80935.834416] [drm] Initialized udl 0.0.1 20120220 on minor 1Oct 15 21:27:25 iospc2 kernel: [80935.836389] usbcore: registered new interface driver udlOct 15 21:27:25 iospc2 kernel: [80936.021458] [drm] write mode info 153 Next, it's time to enable the display for our needs... This can be done either via UI or console, just as you'd prefer it. Adding the external USB display under Linux isn't an issue after all... Settings Manager => Display Personally, I like the console. With the help of xrandr we get the screen identifier first $ xrandrScreen 0: minimum 320 x 200, current 3200 x 1080, maximum 32767 x 32767LVDS1 connected 1280x800+0+0 (normal left inverted right x axis y axis) 331mm x 207mm...DVI-0 connected 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 193mm   1366x768       60.0*+ and then give it the usual shot with auto-configuration. Let the system decide what's best for your hardware... $ xrandr --output DVI-0 --off$ xrandr --output DVI-0 --auto And there we go... Cloned output of main display: New kernel, new display... The external USB display works out-of-the-box with a Linux kernel > 3.9.0. Despite of a good number of resources it is absolutely not necessary to create a Device or Screen section in one of Xorg.conf files. This information belongs to the past and is not valid on kernel 3.9 or higher. Same hardware but Windows 8 Of course, I wanted to know how the latest incarnation from Redmond would handle the new hardware... Flawless! Most interesting aspect here: I did not use the driver installation medium on purpose. And I was right... not too long afterwards a dialog with the EULA of DisplayLink appeared on the main screen. And after confirmation of same it took some more seconds and the external USB monitor was ready to rumble. Well, and not only that one... but see for yourself. This time Windows 8 was the easiest solution after all. Resume I can highly recommend this type of hardware to anyone asking me. Although, it's dimensions are 15.6" it is actually lighter than my Samsung Galaxy Tab 10.1 and it still fits into my laptop bag without any issues. From now on... no more single screen while developing software on the road!

    Read the article

  • Clientside anticheating in multiplayer game 1vs1

    - by garnav
    I'm developing a simple card game, where there will be a matchmaking system that will put you against another human player. This will be the only game mode available, a 1vs1 against another human, no AI. I want to prevent cheating as much as possible. I have already read a lot of similar questions here and I already know that I cannot trust the client and I have to make all verifications server side. I intend to have a server (need one for the matchmaking anyway) and I intend to make some verifications server side but if I want to check everything server side this makes my server to be able to keep track of the state of all current games and check every action, and I don't have the money/infrastructure to support that server. My idea is to make clients check and verify some of the actions made by their opponent* and if they find some illegal action notify the possible cheating to the server and make the server verify it. This will still require my server to keep track of all current games, but it will save resources only checking some things that cannot be checked at client side(like card order in the deck) and only checking other things when they are actually wrong. *(only those they can check with out allowing themselves cheating! for example:they can't check if the played card was in hand cos that will need them to know all cards in hand) Summing up, my questions are: is this a viable approach? will I actually save resources doing this or the extra complexity in the server and client for exchanging this messages is not worth it? do you know any game that has successfully or unsuccessfully tried a similar approach? Thanks all for reading and answering

    Read the article

  • Thumbs Up or Thumbs Down – Intel Debuts Prototype Palm-Reading Tech to Replace Passwords [Poll]

    - by Asian Angel
    This week Intel debuted prototype palm-reading tech that could serve as a replacement for our current password system. Our question for you today is do you think this is the right direction to go for better security or do you feel this is a mistake? Photo courtesy of Jane Rahman. Needless to say password security breaches have been a hot topic as of late, so perhaps a whole new security model is in order. It would definitely eliminate the need to remember a large volume of passwords along with circumventing the problem of poor password creation/selection. At the same time the new technology would still be in the ‘early stages’ of development and may not work as well as people would like. Long-term refinement would definitely improve its performance, but would it really be worth pursuing versus the actual benefits? From the blog post: Intel researcher Sridhar Iyendar demonstrated the technology at Intel’s Developer Forum this week. Waving a hand in front of a “palm vein” detector on a computer, one of Iyendar’s assistants was logged into Windows 7, was able to view his bank account, and then once he moved away the computer locked Windows and went into sleeping mode. How to Get Pro Features in Windows Home Versions with Third Party Tools HTG Explains: Is ReadyBoost Worth Using? HTG Explains: What The Windows Event Viewer Is and How You Can Use It

    Read the article

  • Using Asset Groups

    - by Owen Allen
    I got a question about putting assets in groups: "I'm planning on installing some agents manually on existing systems, and I want to have them put in a specific asset group once they're discovered. I don't see any way to tell the install script to put the asset in a group. How can I add the assets to a group, either through the UI or the CLI?" There are a few ways. In the CLI, you can use groups mode, and use this command to add an asset to a group: attach -n| --gear <asset name> -g| --group <group> You can also use -U| --uuid <UUID> to specify the asset if you have multiple assets with the same name. In the UI, you have a couple of options. You can select an asset and click Add Asset to Group to add it to a group you select. Alternatively, if you're trying to make a group for assets with a specific characteristic, you can specify rules that will automatically add assets to a group based on that characteristic.

    Read the article

  • Vertex buffer acting strange? [on hold]

    - by Ryan Capote
    I'm having a strange problem, and I don't know what could be causing it. My current code is identical to how I've done this before. I'm trying to render a rectangle using VBO and orthographic projection.   My results:     What I expect: 3x3 rectangle in the top left corner   #include <stdio.h> #include <GL\glew.h> #include <GLFW\glfw3.h> #include "lodepng.h"   static const int FALSE = 0; static const int TRUE = 1;   static const char* VERT_SHADER =     "#version 330\n"       "layout(location=0) in vec4 VertexPosition; "     "layout(location=1) in vec2 UV;"     "uniform mat4 uProjectionMatrix;"     /*"out vec2 TexCoords;"*/       "void main(void) {"     "    gl_Position = uProjectionMatrix*VertexPosition;"     /*"    TexCoords = UV;"*/     "}";   static const char* FRAG_SHADER =     "#version 330\n"       /*"uniform sampler2D uDiffuseTexture;"     "uniform vec4 uColor;"     "in vec2 TexCoords;"*/     "out vec4 FragColor;"       "void main(void) {"    /* "    vec4 texel = texture2D(uDiffuseTexture, TexCoords);"     "    if(texel.a <= 0) {"     "         discard;"     "    }"     "    FragColor = texel;"*/     "    FragColor = vec4(1.f);"     "}";   static int g_running; static GLFWwindow *gl_window; static float gl_projectionMatrix[16];   /*     Structures */ typedef struct _Vertex {     float x, y, z, w;     float u, v; } Vertex;   typedef struct _Position {     float x, y; } Position;   typedef struct _Bitmap {     unsigned char *pixels;     unsigned int width, height; } Bitmap;   typedef struct _Texture {     GLuint id;     unsigned int width, height; } Texture;   typedef struct _VertexBuffer {     GLuint bufferObj, vertexArray; } VertexBuffer;   typedef struct _ShaderProgram {     GLuint vertexShader, fragmentShader, program; } ShaderProgram;   /*   http://en.wikipedia.org/wiki/Orthographic_projection */ void createOrthoProjection(float *projection, float width, float height, float far, float near)  {       const float left = 0;     const float right = width;     const float top = 0;     const float bottom = height;          projection[0] = 2.f / (right - left);     projection[1] = 0.f;     projection[2] = 0.f;     projection[3] = -(right+left) / (right-left);     projection[4] = 0.f;     projection[5] = 2.f / (top - bottom);     projection[6] = 0.f;     projection[7] = -(top + bottom) / (top - bottom);     projection[8] = 0.f;     projection[9] = 0.f;     projection[10] = -2.f / (far-near);     projection[11] = (far+near)/(far-near);     projection[12] = 0.f;     projection[13] = 0.f;     projection[14] = 0.f;     projection[15] = 1.f; }   /*     Textures */ void loadBitmap(const char *filename, Bitmap *bitmap, int *success) {     int error = lodepng_decode32_file(&bitmap->pixels, &bitmap->width, &bitmap->height, filename);       if (error != 0) {         printf("Failed to load bitmap. ");         printf(lodepng_error_text(error));         success = FALSE;         return;     } }   void destroyBitmap(Bitmap *bitmap) {     free(bitmap->pixels); }   void createTexture(Texture *texture, const Bitmap *bitmap) {     texture->id = 0;     glGenTextures(1, &texture->id);     glBindTexture(GL_TEXTURE_2D, texture);       glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST);     glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_NEAREST);     glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_REPEAT);     glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_REPEAT);       glTexImage2D(GL_TEXTURE_2D, 0, GL_RGBA, bitmap->width, bitmap->height, 0,              GL_RGBA, GL_UNSIGNED_BYTE, bitmap->pixels);       glBindTexture(GL_TEXTURE_2D, 0); }   void destroyTexture(Texture *texture) {     glDeleteTextures(1, &texture->id);     texture->id = 0; }   /*     Vertex Buffer */ void createVertexBuffer(VertexBuffer *vertexBuffer, Vertex *vertices) {     glGenBuffers(1, &vertexBuffer->bufferObj);     glGenVertexArrays(1, &vertexBuffer->vertexArray);     glBindVertexArray(vertexBuffer->vertexArray);       glBindBuffer(GL_ARRAY_BUFFER, vertexBuffer->bufferObj);     glBufferData(GL_ARRAY_BUFFER, sizeof(Vertex) * 6, (const GLvoid*)vertices, GL_STATIC_DRAW);       const unsigned int uvOffset = sizeof(float) * 4;       glVertexAttribPointer(0, 4, GL_FLOAT, GL_FALSE, sizeof(Vertex), 0);     glVertexAttribPointer(1, 2, GL_FLOAT, GL_FALSE, sizeof(Vertex), (GLvoid*)uvOffset);       glEnableVertexAttribArray(0);     glEnableVertexAttribArray(1);       glBindBuffer(GL_ARRAY_BUFFER, 0);     glBindVertexArray(0); }   void destroyVertexBuffer(VertexBuffer *vertexBuffer) {     glDeleteBuffers(1, &vertexBuffer->bufferObj);     glDeleteVertexArrays(1, &vertexBuffer->vertexArray); }   void bindVertexBuffer(VertexBuffer *vertexBuffer) {     glBindVertexArray(vertexBuffer->vertexArray);     glBindBuffer(GL_ARRAY_BUFFER, vertexBuffer->bufferObj); }   void drawVertexBufferMode(GLenum mode) {     glDrawArrays(mode, 0, 6); }   void drawVertexBuffer() {     drawVertexBufferMode(GL_TRIANGLES); }   void unbindVertexBuffer() {     glBindVertexArray(0);     glBindBuffer(GL_ARRAY_BUFFER, 0); }   /*     Shaders */ void compileShader(ShaderProgram *shaderProgram, const char *vertexSrc, const char *fragSrc) {     GLenum err;     shaderProgram->vertexShader = glCreateShader(GL_VERTEX_SHADER);     shaderProgram->fragmentShader = glCreateShader(GL_FRAGMENT_SHADER);       if (shaderProgram->vertexShader == 0) {         printf("Failed to create vertex shader.");         return;     }       if (shaderProgram->fragmentShader == 0) {         printf("Failed to create fragment shader.");         return;     }       glShaderSource(shaderProgram->vertexShader, 1, &vertexSrc, NULL);     glCompileShader(shaderProgram->vertexShader);     glGetShaderiv(shaderProgram->vertexShader, GL_COMPILE_STATUS, &err);       if (err != GL_TRUE) {         printf("Failed to compile vertex shader.");         return;     }       glShaderSource(shaderProgram->fragmentShader, 1, &fragSrc, NULL);     glCompileShader(shaderProgram->fragmentShader);     glGetShaderiv(shaderProgram->fragmentShader, GL_COMPILE_STATUS, &err);       if (err != GL_TRUE) {         printf("Failed to compile fragment shader.");         return;     }       shaderProgram->program = glCreateProgram();     glAttachShader(shaderProgram->program, shaderProgram->vertexShader);     glAttachShader(shaderProgram->program, shaderProgram->fragmentShader);     glLinkProgram(shaderProgram->program);          glGetProgramiv(shaderProgram->program, GL_LINK_STATUS, &err);       if (err != GL_TRUE) {         printf("Failed to link shader.");         return;     } }   void destroyShader(ShaderProgram *shaderProgram) {     glDetachShader(shaderProgram->program, shaderProgram->vertexShader);     glDetachShader(shaderProgram->program, shaderProgram->fragmentShader);       glDeleteShader(shaderProgram->vertexShader);     glDeleteShader(shaderProgram->fragmentShader);       glDeleteProgram(shaderProgram->program); }   GLuint getUniformLocation(const char *name, ShaderProgram *program) {     GLuint result = 0;     result = glGetUniformLocation(program->program, name);       return result; }   void setUniformMatrix(float *matrix, const char *name, ShaderProgram *program) {     GLuint loc = getUniformLocation(name, program);       if (loc == -1) {         printf("Failed to get uniform location in setUniformMatrix.\n");         return;     }       glUniformMatrix4fv(loc, 1, GL_FALSE, matrix); }   /*     General functions */ static int isRunning() {     return g_running && !glfwWindowShouldClose(gl_window); }   static void initializeGLFW(GLFWwindow **window, int width, int height, int *success) {     if (!glfwInit()) {         printf("Failed it inialize GLFW.");         *success = FALSE;        return;     }          glfwWindowHint(GLFW_RESIZABLE, 0);     *window = glfwCreateWindow(width, height, "Alignments", NULL, NULL);          if (!*window) {         printf("Failed to create window.");         glfwTerminate();         *success = FALSE;         return;     }          glfwMakeContextCurrent(*window);       GLenum glewErr = glewInit();     if (glewErr != GLEW_OK) {         printf("Failed to initialize GLEW.");         printf(glewGetErrorString(glewErr));         *success = FALSE;         return;     }       glClearColor(0.f, 0.f, 0.f, 1.f);     glViewport(0, 0, width, height);     *success = TRUE; }   int main(int argc, char **argv) {          int err = FALSE;     initializeGLFW(&gl_window, 480, 320, &err);     glDisable(GL_DEPTH_TEST);     if (err == FALSE) {         return 1;     }          createOrthoProjection(gl_projectionMatrix, 480.f, 320.f, 0.f, 1.f);          g_running = TRUE;          ShaderProgram shader;     compileShader(&shader, VERT_SHADER, FRAG_SHADER);     glUseProgram(shader.program);     setUniformMatrix(&gl_projectionMatrix, "uProjectionMatrix", &shader);       Vertex rectangle[6];     VertexBuffer vbo;     rectangle[0] = (Vertex){0.f, 0.f, 0.f, 1.f, 0.f, 0.f}; // Top left     rectangle[1] = (Vertex){3.f, 0.f, 0.f, 1.f, 1.f, 0.f}; // Top right     rectangle[2] = (Vertex){0.f, 3.f, 0.f, 1.f, 0.f, 1.f}; // Bottom left     rectangle[3] = (Vertex){3.f, 0.f, 0.f, 1.f, 1.f, 0.f}; // Top left     rectangle[4] = (Vertex){0.f, 3.f, 0.f, 1.f, 0.f, 1.f}; // Bottom left     rectangle[5] = (Vertex){3.f, 3.f, 0.f, 1.f, 1.f, 1.f}; // Bottom right       createVertexBuffer(&vbo, &rectangle);            bindVertexBuffer(&vbo);          while (isRunning()) {         glClear(GL_COLOR_BUFFER_BIT);         glfwPollEvents();                    drawVertexBuffer();                    glfwSwapBuffers(gl_window);     }          unbindVertexBuffer(&vbo);       glUseProgram(0);     destroyShader(&shader);     destroyVertexBuffer(&vbo);     glfwTerminate();     return 0; }

    Read the article

  • Windows 8 + Ubuntu dualboot problem - ubuntu does not load after windows updates

    - by Michal Biros
    I have installed Windows 8 64-bit and Ubuntu 14.04 64-bit in dualboot with EFI mode. Everything worked great. I could run Ubuntu or Windows without any problems. Only one little issue was that Windows locked NTFS partitions when I shut it down. When I clicked on restart button in Windows and started Ubuntu, partitions mounted successfully. But today ... I opened windows and downloaded all available updates. When I wanted to come back to Ubuntu I noticed that grub did not count down seconds to automatic start. After choosing Ubuntu option manually, the OS did not load. Just black screen with white underscore in the upper left corner. Windows is accessible always without such issues. Last time I solved it by reinstalling ubuntu but I dont want to do it each time windows downloads some updates. Have you ever meet such problem, or do you know how to solve it? EDIT Ubuntu boots, but it won't start. It ends on loading screen.

    Read the article

  • Firefox 12's hardware acceleration on Ubuntu 12.04 LTS

    - by user64943
    After I have installed Ubuntu 12.04 LTS (32 bits), Firefox 12 works fine but without hardware acceleration. Needless to say I have the latest nVidia's proprietary drivers installed and my Firefox Preferences, on "Advanced" tab, "Browsing" section, have the option "Use hardware acceleration when available" checked. I have tried the following things before asking this question: Creating a boolean key "webgl.force-enabled" and set it to true on Firefox's page about:config; Starting a new profile like commented on thread Mozilla Firefox 12 is very slow on Ubuntu 12.04 LTS; I have updated my nVidia driver to version 295.53. And none of this have worked. As you can see below in my Firefox's page about:support report, "Graphics" section shows no "GPU Accelerated Windows": Adapter Description NVIDIA Corporation -- GeForce GTX 460/PCIe/SSE2 Vendor ID NVIDIA Corporation Device ID GeForce GTX 460/PCIe/SSE2 Driver Version 4.2.0 NVIDIA 295.53 WebGL Renderer NVIDIA Corporation -- GeForce GTX 460/PCIe/SSE2 -- 4.2.0 NVIDIA 295.53 GPU Accelerated Windows 0 AzureBackend skia I use the following site to test hardware acceleration: http://ie.microsoft.com/testdrive/Performance/FishBowl/ On Windows 7 I get 60 fps even with 1,750 fishes on browser's Full Screen Mode (1680x1050x32bit-color). On Ubuntu 12.04 LTS, same nVidia drivers (as shown in report), won't go faster than 15 fps with only 1,000 fishes. Can anybody help me? Best Regards,

    Read the article

  • Trying to login to openssh, permission denied

    - by noah sisk
    I have been trying to login to ssh on a ubuntu 11.04 server as root with the AllowRootLogin thing set to yes but i have been getting a "Permision denied" Heres a copy of my attempt with ssh -v: Last login: Fri Jun 8 21:07:20 on ttys000 noah-sisks-macbook-pro:~ phreshness$ ssh -v [email protected] -p 22 OpenSSH_5.6p1, OpenSSL 0.9.8r 8 Feb 2011 debug1: Reading configuration data /etc/ssh_config debug1: Applying options for * debug1: Connecting to 192.168.1.133 [192.168.1.133] port 22. debug1: Connection established. debug1: identity file /Users/phreshness/.ssh/id_rsa type -1 debug1: identity file /Users/phreshness/.ssh/id_rsa-cert type -1 debug1: identity file /Users/phreshness/.ssh/id_dsa type -1 debug1: identity file /Users/phreshness/.ssh/id_dsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.9p1 Debian-5ubuntu1 debug1: match: OpenSSH_5.9p1 Debian-5ubuntu1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.6 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host '192.168.1.133' is known and matches the RSA host key. debug1: Found key in /Users/phreshness/.ssh/known_hosts:6 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password debug1: Next authentication method: publickey debug1: Trying private key: /Users/phreshness/.ssh/id_rsa debug1: Trying private key: /Users/phreshness/.ssh/id_dsa debug1: Next authentication method: password [email protected]'s password: debug1: Authentications that can continue: publickey,password Permission denied, please try again. [email protected]'s password:

    Read the article

  • How do I apply different probability factors in an algorithm for a cricket simulation game?

    - by Komal Sharma
    I am trying to write the algorithm for a cricket simulation game which generates runs on each ball between 0 to 6. The run rate or runs generated changes when these factors come into play like skill of the batsman, skill of the bowler, target to be chased. Wickets left. If the batsman is skilled more runs will be generated. There will be a mode of play of the batsman aggressive, normal, defensive. If he plays aggressive chances of getting out will be more. If the chasing target is more the run rate should be more. If the overs are final the run rate should be more. I am using java random number function for this. The code so far I've written is public class Cricket { public static void main(String args[]) { int totalRuns=0; //i is the balls bowled for (int i = 1; i <= 60 ; i++) { int RunsPerBall = (int)(Math.random()*6); //System.out.println(Random); totalRuns=totalRuns+RunsPerBall; } System.out.println(totalRuns); } } Can somebody help me how to apply the factors in the code. I believe probability will be used with this. I am not clear how to apply the probability of the factors stated above in the code.

    Read the article

< Previous Page | 554 555 556 557 558 559 560 561 562 563 564 565  | Next Page >