Search Results

Search found 15535 results on 622 pages for 'mat keep'.

Page 558/622 | < Previous Page | 554 555 556 557 558 559 560 561 562 563 564 565  | Next Page >

• Why is my external USB hard drive sometimes completely inaccessible?

  - by Eliah Kagan

  I have an external USB hard drive, consisting of an 1 TB SATA drive in a Rosewill RX35-AT-SU SLV Aluminum 3.5" Silver USB 2.0 External Enclosure, plugged into my SONY VAIO VGN-NS310F laptop. It is plugged directly into the computer (not through a hub). The drive inside the enclosure is a 7200 rpm Western Digital, but I don't remember the exact model. I can remove the drive from the enclosure (again), if people think it's necessary to know that detail. The drive is formatted ext4. I mount it dynamically with udisks on my Lubuntu 11.10 system, usually automatically via PCManFM. (I have had Lubuntu 12.04 on this machine, and experienced all this same behavior with that too.) Every once in a while--once or twice a day--it becomes inaccessible, and difficult to unmount. Attempting to unmount it with sudo umount ... gives an error message saying the drive is in use and suggesting fuser and lsof to find out what is using it. Killing processes found to be using the drive with fuser and lsof is sometimes sufficient to let me unmount it, but usually isn't. Once the drive is unmounted or the machine is rebooted, the drive will not mount. Plugging in the drive and turning it on registers nothing on the computer. dmesg is unchanged. The drive's access light usually blinks vigorously, as though the drive is being accessed constantly. Then eventually, after I keep the drive off for a while (half an hour), I am able to mount it again. While the drive doesn't work on this machine for a while, it will work immediately on another machine running the same version of Ubuntu. Sometimes bringing it back over from the other machine seems to "fix" it. Sometimes it doesn't. The drive doesn't always stop being accessible while mounted, before becoming unmountable. Sometimes it works fine, I turn off the computer, I turn the computer back on, and I cannot mount the drive. Currently this is the only drive with which I have this problem, but I've had problems that I think are the same as this, with different drives, on different Ubuntu machines. This laptop has another external USB drive plugged into it regularly, which doesn't have this problem. Unplugging that drive before plugging in the "problem" drive doesn't fix the problem. I've opened the drive up and made sure the connections were tight in the past, and that didn't seem to help (any more than waiting the same amount of time that it took to open and close the drive, before attempting to remount it). Does anyone have any ideas about what could be causing this, what troubleshooting steps I should perform, and/or how I could fix this problem altogether? Update: I tried replacing the USB data cable (from the enclosure to the laptop), as Merlin suggested. I should've tried that long ago, since it fits the symptoms perfectly (the drive works on another machine, which would make sense because the cable would be bent at a different angle, possibly completing a circuit of frayed wires). Unfortunately, though, this did not help--I have the same problem with the new cable. I'll try to provide additional detailed information about the drive inside the enclosure, next time I'm able to get the drive working. (At the moment I don't have another machine available to attach it.) Major Update (28 June 2012) The drive seems to have deteriorated considerably. I think this is so, because I've attached it to another machine and gotten lots of errors about invalid characters, when copying files from it. I am less interested in recovering data from the drive than I am in figuring out what is wrong with it. I specifically want to figure out if the problem is the drive or the enclosure. Now, when I plug the drive into the original machine where I was having the problems, it still doesn't appear (including with sudo fdisk -l), but it is recognized by the kernel and messages are added to dmesg. Most of the message consist of errors like this, repeated many times: [ 7.707593] sd 5:0:0:0: [sdc] Unhandled sense code [ 7.707599] sd 5:0:0:0: [sdc] Result: hostbyte=invalid driverbyte=DRIVER_SENSE [ 7.707606] sd 5:0:0:0: [sdc] Sense Key : Medium Error [current] [ 7.707614] sd 5:0:0:0: [sdc] Add. Sense: Unrecovered read error [ 7.707621] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 [ 7.707636] end_request: critical target error, dev sdc, sector 0 [ 7.707641] Buffer I/O error on device sdc, logical block 0 Here are all the lines from dmesg starting with when the drive is recognized. Please note that: I'm back to running Lubuntu 12.04 on this machine (and perhaps that's a factor in better error messages). Now that the drive has been plugged into another machine and back into this one, and also now that this machine is back to running 12.04, the drive's access light doesn't blink as I had described. Looking at the drive, it would appear as though it is working normally, with low or no access. This behavior (the errors) occurs when rebooting the machine with the drive plugged in, and also when manually plugging in the drive. A few of the messages are about /dev/sdb. That drive is working fine. The bad drive is /dev/sdc. I just didn't want to edit anything out from the middle.

  Read the article

• View Docs and PDFs Directly in Google Chrome

  - by Matthew Guay

  Would you like to view documents, presentations, and PDFs directly in Google Chrome?  Here’s a handy extension that makes Google Docs your default online viewer so don’t have to download the file first. Getting Started By default, when you come across a PDF or other common document file online in Google Chrome, you’ll have to download the file and open it in a separate application. It’d be much easier to simply view online documents directly in Chrome.  To do this, head over to the Docs PDF/PowerPoint Viewer page on the Chrome Extensions site (link below), and click Install to add it to your browser. Click Install to confirm that you want to install this extension. Extensions don’t run by default in Incognito mode, so if you’d like to always view documents directly in Chrome, open the Extensions page and check Allow this extension to run in incognito. Now, when you click a link for a document online, such as a .docx file from Word, it will open in the Google Docs viewer. These documents usually render in their original full-quality.  You can zoom in and out to see exactly what you want, or search within the document.  Or, if it doesn’t look correct, you can click the Download link in the top left to save the original document to your computer and open it in Office.   Even complex PDF render very nicely.  Do note that Docs will keep downloading the document as you’re reading it, so if you jump to the middle of a document it may look blurry at first but will quickly clear up. You can even view famous presentations online without opening them in PowerPoint.  Note that this will only display the slides themselves, but if you’re looking for information you likely don’t need the slideshow effects anyway.   Adobe Reader Conflicts If you already have Adobe Acrobat or Adobe Reader installed on your computer, PDF files may open with the Adobe plugin.  If you’d prefer to read your PDFs with the Docs PDF Viewer, then you need to disable the Adobe plugin.  Enter the following in your Address Bar to open your Chrome Plugins page: chrome://plugins/ and then click Disable underneath the Adobe Acrobat plugin. Now your PDFs will always open with the Docs viewer instead. Performance Who hasn’t been frustrated by clicking a link to a PDF file, only to have your browser pause for several minutes while Adobe Reader struggles to download and display the file?  Google Chrome’s default behavior of simply downloading the files and letting you open them is hardly more helpful.  This extension takes away both of these problems, since it renders the documents on Google’s servers.  Most documents opened fairly quickly in our tests, and we were able to read large PDFs only seconds after clicking their link.  Also, the Google Docs viewer rendered the documents much better than the HTML version in Google’s cache. Google Docs did seem to have problem on some files, and we saw error messages on several documents we tried to open.  If you encounter this, click the Download link in the top left corner to download the file and view it from your desktop instead. Conclusion Google Docs has improved over the years, and now it offers fairly good rendering even on more complex documents.  This extension can make your browsing easier, and help documents and PDFs feel more like part of the Internet.  And, since the documents are rendered on Google’s servers, it’s often faster to preview large files than to download them to your computer. Link Download the Docs PDF/PowerPoint Viewer extension from Google Similar Articles Productive Geek Tips Integrate Google Docs with Outlook the Easy WayGoogle Image Search Quick FixView the Time & Date in Chrome When Hiding Your TaskbarView Maps and Get Directions in Google ChromeHow To Export Documents from Google Docs to Your Computer TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 How to Forecast Weather, without Gadgets Outlook Tools, one stop tweaking for any Outlook version Zoofs, find the most popular tweeted YouTube videos Video preview of new Windows Live Essentials 21 Cursor Packs for XP, Vista & 7 Map the Stars with Stellarium

  Read the article

• Simple Preferred time control using silverlight 3.

  - by mohanbrij

  Here I am going to show you a simple preferred time control, where you can select the day of the week and the time of the day. This can be used in lots of place where you may need to display the users preferred times. Sample screenshot is attached below. This control is developed using Silverlight 3 and VS2008, I am also attaching the source code with this post. This is a very basic example. You can download and customize if further for your requirement if you want. I am trying to explain in few words how this control works and what are the different ways in which you can customize it further. File: PreferredTimeControl.xaml, in this file I have just hardcoded the controls and their positions which you can see in the screenshot above. In this example, to change the start day of the week and time, you will have to go and change the design in XAML file, its not controlled by your properties or implementation classes. You can also customize it to change the start day of the week, Language, Display format, styles, etc, etc. File: PreferredTimeControl.xaml.cs, In this control using the code below, first I am taking all the checkbox from my form and store it in the Global Variable, which I can use across my page. List<CheckBox> checkBoxList; #region Constructor public PreferredTimeControl() { InitializeComponent(); GetCheckboxes();//Keep all the checkbox in List in the Load itself } #endregion #region Helper Methods private List<CheckBox> GetCheckboxes() { //Get all the CheckBoxes in the Form checkBoxList = new List<CheckBox>(); foreach (UIElement element in LayoutRoot.Children) { if (element.GetType().ToString() == "System.Windows.Controls.CheckBox") { checkBoxList.Add(element as CheckBox); } } return checkBoxList; } Then I am exposing the two methods which you can use in the container form to get and set the values in this controls. /// <summary> /// Set the Availability on the Form, with the Provided Timings /// </summary> /// <param name="selectedTimings">Provided timings comes from the DB in the form 11,12,13....37 /// Where 11 refers to Monday Morning, 12 Tuesday Morning, etc /// Here 1, 2, 3 is for Morning, Afternoon and Evening respectively, and for weekdays /// 1,2,3,4,5,6,7 where 1 is for Monday, Tuesday, Wednesday, Thrusday, Friday, Saturday and Sunday respectively /// So if we want Monday Morning, we can can denote it as 11, similarly for Saturday Evening we can write 36, etc /// </param> public void SetAvailibility(string selectedTimings) { foreach (CheckBox chk in checkBoxList) { chk.IsChecked = false; } if (!String.IsNullOrEmpty(selectedTimings)) { string[] selectedString = selectedTimings.Split(','); foreach (string selected in selectedString) { foreach (CheckBox chk in checkBoxList) { if (chk.Tag.ToString() == selected) { chk.IsChecked = true; } } } } } /// <summary> /// Gets the Availibility from the selected checkboxes /// </summary> /// <returns>String in the format of 11,12,13...41,42...31,32...37</returns> public string GetAvailibility() { string selectedText = string.Empty; foreach (CheckBox chk in GetCheckboxes()) { if (chk.IsChecked == true) { selectedText = chk.Tag.ToString() + "," + selectedText; } } return selectedText; }   In my example I am using the matrix format for Day and Time, for example Monday=1, Tuesday=2, Wednesday=3, Thursday = 4, Friday = 5, Saturday = 6, Sunday=7. And Morning = 1, Afternoon =2, Evening = 3. So if I want to represent Morning-Monday I will have to represent it as 11, Afternoon-Tuesday as 22, Morning-Wednesday as 13, etc. And in the other way to set the values in the control I am passing the values in the control in the same format as preferredTimeControl.SetAvailibility("11,12,13,16,23,22"); So this will set the checkbox value for Morning-Monday, Morning-Tuesday, Morning-Wednesday, Morning-Saturday, Afternoon of Tuesday and Afternoon of Wednesday. To implement this control, first I have to import this control in xmlns namespace as xmlns:controls="clr-namespace:PreferredTimeControlApp" and finally put in your page wherever you want, <Grid x:Name="LayoutRoot" Style="{StaticResource LayoutRootGridStyle}"> <Border x:Name="ContentBorder" Style="{StaticResource ContentBorderStyle}"> <controls:PreferredTimeControl x:Name="preferredTimeControl"></controls:PreferredTimeControl> </Border> </Grid> And in the code behind you can just include this code: private void InitializeControl() { preferredTimeControl.SetAvailibility("11,12,13,16,23,22"); } And you are ready to go. For more details you can refer to my code attached. I know there can be even simpler and better way to do this. Let me know if any other ideas. Sorry, Guys Still I have used Silverlight 3 and VS2008, as from the system I am uploading this is still not upgraded, but still you can use the same code with Silverlight 4 and VS2010 without any changes. May be just it will ask you to upgrade your project which will take care of rest. Download Source Code.   Thanks ~Brij

  Read the article

• Answers to “What source control system do you use?” (and some winners)

  - by jamiet

  About a month ago I posed a question here on my blog SQL Server devs–what source control system do you use, if any? (answer and maybe win free stuff) in which I asked SQL Server developers to answer the following questions: Are you putting your SQL Server code into a source control system? If so, what source control server software (e.g. TFS, Git, SVN, Mercurial, SourceSafe, Perforce) are you using? What source control client software are you using (e.g. TFS Team Explorer, Tortoise, Red Gate SQL Source Control, Red Gate SQL Connect, Git Bash, etc…)? Why did you make those particular software choices? Any interesting anecdotes to share in regard to your use of source control and SQL Server? I had some really great responses (I highly recommend going and reading them). I promised that the five best, most thought-provoking, responses (as determined by me) would win one of five pairs of licenses for Red Gate SQL Source Control and Red Gate SQL Connect; here are the five that I chose (note that if you responded but did not leave a means of getting in touch then you weren’t considered for one of the prizes – sorry): In general, I don't think the management overhead and licensing cost associated with TFS is worthwhile if all you're doing is using source control. To get value from TFS, at a minimum you need to be using team build, and possibly other stuff as well, such as the sharepoint integration. If that's all you need, then svn with Tortoise would be my first choice. If you want to add build automation later, you can do this with cruisecontrol (is it still called that?), JetBrains, etc. For a long time I thought that Redgate's claims about "bridging the SSMS-VS divide" were a load of hot air, since in my experience anyone who knew what they were doing was using Visual Studio, in particular SSDT and its predecessors. However, on a recent client I was putting in source control for the first time, and I discovered that the "divide" really does exist. That client has ended up using svn with Redgate SQL Source Control, with no build automation, but with scope to add it in the future. Gavin Campbell I think putting the DB under source control is a great idea.  I have issues with the earlier versions of SQL Source Control in that it provides little help in versioning the DB. I think the latest version merges SQL Compare and SQL Source Control together.  Which is how it should have been all along. Sure I have the DB scripts in SVN, but I can't automate DB builds and changes without more tools.  Frankly I'm surprised databases don't have some sort of versioning built into them. Nick Portelli Source control has been immensely useful and saved me from a lot of rework on more than one occasion.  I have learned that you have to be extremely careful checking in data.  Our system is internal only so during the system production run once a week, if there is a problem that I can fix easily(for example, a control table points to a file in the wrong environment), I'll do it directly in production so the run can continue as soon as possible since we have a specified time window.  We do full test runs to minimize this but it has come up once or twice.  We use Red-Gate source control to "push" from the test environment to the production environment.  There have been a couple of occasions where the test environment with the wrong setting was pushed back over the production environment because the change was made only in production.  Gotta keep an eye on that. Alan Dykes Goodness is it manual.  And can be extremely painful at times.  Not only are we running thin, we are constrained on the tools we can get ($$ must mean free).  Certainly no excuse, and a great opportunity to improve my skills by learning new things.  But...  Getting buy in a on a proven process or methodology is hard, takes time, and diverts us from development.  If SQL Source Control is easy to use and proven oh boy could you get some serious fans around here!  Seriously though, as the "accidental dba" of this shop any new ideas / easy to implement tools can make a world of difference in productivity and most importantly accuracy.  Manual = bad. :) John Hennesey (who left his email address) The one thing I would love to know more about is the unique challenges of working with databases as source code - you can store scripts, but are they written as deployment scripts with all the logic about how to apply them to an existing DB? Where is that baseline DB? Where's the data? How does a team share the data and the code? It's a real challenge. Merrill Aldrich Congratulations to the five of you. Red Gate will be in touch with you soon about your free licenses. Thank you to all those that responded. And again, go and check out all the responses – those above are only small proportion from what is a very interesting comment thread. @Jamiet

  Read the article

• User Productivity Kit - Powerful Packages (Part 2)

  - by [email protected]

  In my first post on packages I described what a package is and how it can be used. I also started explaining some of the considerations that should be taken into account when determining how to arrange your packages. The first is when the files are interrelated and depend on one another such as an HTML file and it's graphics. A second consideration is how the files are used in your outlines. Let's say you're using a dozen Word doc files. You could place them all in a single package or put each Word doc file in a separate package but what's the right thing to do? There are several factors that will influence your decision. To understand the first, let me explain a function of UPK publishing. Take an outline in UPK that has an attachment (concept, frame link, or hyperlink) that points to a file in a package. When you publish this outline, the publishing engine will determine that there is a link to a file in the package and copy the contents of the package to the publishing destination directory. This is done to ensure that any interrelated files are kept together. For the situation where you have an HTML file with links to number of graphics files, this is a good thing. If, however, the package has a dozen unrelated Word doc files and you link to only one of them, all dozen Word documents will be copied to the publishing destination directory.  Whether or not this is a good thing is dependent on two things. First, are all of the files in the package used in the outline that you're publishing? Take an outline that includes links to all of the Word documents in that dozen document package I described earlier. For this situation, you may choose to keep all the files in a single package for convenience. A second consideration is how your organization leverages reuse in UPK. In this context, I'm referring to the link style of reuse such as when you link to the same topic from multiple UPK outlines and changes to the topic appear in both places. Take an example where you have the earlier mentioned dozen Word document package and an outline with a dozen topics in it. Each topic has an attachment pointing to one of the Word documents in the package (frame link, concept, etc.) If you're only publishing this outline, the single package probably works fine but what if you're reusing one of these topics in another outline? As I explained earlier, linking to one file in the package will result in all files in the package being copied to your published output. In this example, linking to one topic in the first outline will result in all dozen Word documents being copied to the published output. This may result in files in the output that you don't want there for business or size reasons. This is a situation in which you should consider placing each of the Word documents in it's own separate package. With each document in it's own package, that link to a single document will result in only that single package and single Word document being copied to the published output. In my last post I had described that packages are documents in the UPK library. When using the multi-user version of the UPK Developer you can leverage standard library capabilities for managing the files in these packages during the development process - capabilities such as check in / check out, history, etc. When structuring your packages take into consideration how the authors are going to be adding, modifying and deleting files from the packages. A single package is a single document in the UPK library. Like any other document in the library, a single user can check out the package and edit it at a time. If you have a large number of files in a single package and these must be modified by many users, you need to consider whether this will cause problems as multiple users compete to update the same package. If the files don't depend on each other consider placing the files in separate packages to reduce contention. I hope you've enjoyed these two posts on how you can leverage the power of packages in your content. In summary, consider the following when structuring your packages: Is the asset a single, standalone file or a set of files that depend on each other? Will all the files always be used together in a single outline or may only some of the files be needed based on how the content is reused across multiple outlines? Will multiple developers need to update the files in a single package or should you break it into multiple packages to reduce contention when checking out the document? We'd like to hear from you on how you're using packages in your content. Please add your comments below! Thank you and I hope these two posts have given you additional insights into how to use packages in your content and structure them for efficient use. John Zaums Senior Director, Product Development Oracle User Productivity Kit

  Read the article

• The Unspoken - The Why of GC Ergonomics

  - by jonthecollector

  Do you use GC ergonomics, -XX:+UseAdaptiveSizePolicy, with the UseParallelGC collector? The jist of GC ergonomics for that collector is that it tries to grow or shrink the heap to meet a specified goal. The goals that you can choose are maximum pause time and/or throughput. Don't get too excited there. I'm speaking about UseParallelGC (the throughput collector) so there are definite limits to what pause goals can be achieved. When you say out loud "I don't care about pause times, give me the best throughput I can get" and then say to yourself "Well, maybe 10 seconds really is too long", then think about a pause time goal. By default there is no pause time goal and the throughput goal is high (98% of the time doing application work and 2% of the time doing GC work). You can get more details on this in my very first blog. GC ergonomics The UseG1GC has its own version of GC ergonomics, but I'll be talking only about the UseParallelGC version. If you use this option and wanted to know what it (GC ergonomics) was thinking, try -XX:AdaptiveSizePolicyOutputInterval=1 This will print out information every i-th GC (above i is 1) about what the GC ergonomics to trying to do. For example, UseAdaptiveSizePolicy actions to meet *** throughput goal *** GC overhead (%) Young generation: 16.10 (attempted to grow) Tenured generation: 4.67 (attempted to grow) Tenuring threshold: (attempted to decrease to balance GC costs) = 1 GC ergonomics tries to meet (in order) Pause time goal Throughput goal Minimum footprint The first line says that it's trying to meet the throughput goal. UseAdaptiveSizePolicy actions to meet *** throughput goal *** This run has the default pause time goal (i.e., no pause time goal) so it is trying to reach a 98% throughput. The lines Young generation: 16.10 (attempted to grow) Tenured generation: 4.67 (attempted to grow) say that we're currently spending about 16% of the time doing young GC's and about 5% of the time doing full GC's. These percentages are a decaying, weighted average (earlier contributions to the average are given less weight). The source code is available as part of the OpenJDK so you can take a look at it if you want the exact definition. GC ergonomics is trying to increase the throughput by growing the heap (so says the "attempted to grow"). The last line Tenuring threshold: (attempted to decrease to balance GC costs) = 1 says that the ergonomics is trying to balance the GC times between young GC's and full GC's by decreasing the tenuring threshold. During a young collection the younger objects are copied to the survivor spaces while the older objects are copied to the tenured generation. Younger and older are defined by the tenuring threshold. If the tenuring threshold hold is 4, an object that has survived fewer than 4 young collections (and has remained in the young generation by being copied to the part of the young generation called a survivor space) it is younger and copied again to a survivor space. If it has survived 4 or more young collections, it is older and gets copied to the tenured generation. A lower tenuring threshold moves objects more eagerly to the tenured generation and, conversely a higher tenuring threshold keeps copying objects between survivor spaces longer. The tenuring threshold varies dynamically with the UseParallelGC collector. That is different than our other collectors which have a static tenuring threshold. GC ergonomics tries to balance the amount of work done by the young GC's and the full GC's by varying the tenuring threshold. Want more work done in the young GC's? Keep objects longer in the survivor spaces by increasing the tenuring threshold. This is an example of the output when GC ergonomics is trying to achieve a pause time goal UseAdaptiveSizePolicy actions to meet *** pause time goal *** GC overhead (%) Young generation: 20.74 (no change) Tenured generation: 31.70 (attempted to shrink) The pause goal was set at 50 millisecs and the last GC was 0.415: [Full GC (Ergonomics) [PSYoungGen: 2048K-0K(26624K)] [ParOldGen: 26095K-9711K(28992K)] 28143K-9711K(55616K), [Metaspace: 1719K-1719K(2473K/6528K)], 0.0758940 secs] [Times: user=0.28 sys=0.00, real=0.08 secs] The full collection took about 76 millisecs so GC ergonomics wants to shrink the tenured generation to reduce that pause time. The previous young GC was 0.346: [GC (Allocation Failure) [PSYoungGen: 26624K-2048K(26624K)] 40547K-22223K(56768K), 0.0136501 secs] [Times: user=0.06 sys=0.00, real=0.02 secs] so the pause time there was about 14 millisecs so no changes are needed. If trying to meet a pause time goal, the generations are typically shrunk. With a pause time goal in play, watch the GC overhead numbers and you will usually see the cost of setting a pause time goal (i.e., throughput goes down). If the pause goal is too low, you won't achieve your pause time goal and you will spend all your time doing GC. GC ergonomics is meant to be simple because it is meant to be used by anyone. It was not meant to be mysterious and so this output was added. If you don't like what GC ergonomics is doing, you can turn it off with -XX:-UseAdaptiveSizePolicy, but be pre-warned that you have to manage the size of the generations explicitly. If UseAdaptiveSizePolicy is turned off, the heap does not grow. The size of the heap (and the generations) at the start of execution is always the size of the heap. I don't like that and tried to fix it once (with some help from an OpenJDK contributor) but it unfortunately never made it out the door. I still have hope though. Just a side note. With the default throughput goal of 98% the heap often grows to it's maximum value and stays there. Definitely reduce the throughput goal if footprint is important. Start with -XX:GCTimeRatio=4 for a more modest throughput goal (%20 of the time spent in GC). A higher value means a smaller amount of time in GC (as the throughput goal).

  Read the article

• Searching for the Perfect Developer&rsquo;s Laptop.

  - by mbcrump

  I have been in the market for a new computer for several months. I set out with a budget of around $1200. I knew up front that the machine would be used for developing applications and maybe some light gaming. I kept switching between buying a laptop or a desktop but the laptop won because: With a Laptop, I can carry it everywhere and with a desktop I can’t. I searched for about 2 weeks and narrowed it down to a list of must-have’s : i7 Processor (I wasn’t going to settle for an i5 or AMD. I wanted a true Quad-core machine, not 2 dual-core fused together). 15.6” monitor SSD 128GB or Larger. – It’s almost 2011 and I don’t want an old standard HDD in this machine. 8GB of DDR3 Ram. – The more the better, right? 1GB Video Card (Prefer NVidia) – I might want to play games with this. HDMI Port – Almost a standard on new Machines. This would be used when I am on the road and want to stream Netflix to the HDTV in the Hotel room. Webcam Built-in – This would be to video chat with the wife and kids if I am on the road. 6-Cell Battery. – I’ve read that an i7 in a laptop really kills the battery. A 6-cell or 9-cell is even better. That is a pretty long list for a budget of around $1200. I searched around the internet and could not buy this machine prebuilt for under $1200. That was even with coupons and my company’s 10% Dell discount. The only way that I would get a machine like this was to buy a prebuilt and replace parts. I chose the  Lenovo Y560 on Newegg to start as my base. Below is a top-down picture of it.   Part 1: The Hardware The Specs for this machine: Color :  GrayOperating System : Windows 7 Home Premium 64-bitCPU Type : Intel Core i7-740QM(1.73GHz)Screen : 15.6" WXGAMemory Size : 4GB DDR3Hard Disk : 500GBOptical Drive : DVD±R/RWGraphics Card : ATI Mobility Radeon HD 5730Video Memory : 1GBCommunication : Gigabit LAN and WLANCard slot : 1 x Express Card/34Battery Life : Up to 3.5 hoursDimensions : 15.20" x 10.00" x 0.80" - 1.30"Weight : 5.95 lbs. This computer met most of the requirements above except that it didn’t come with an SSD or have 8GB of DDR3 Memory. So, I needed to start shopping except this time for an SSD. I asked around on twitter and other hardware forums and everyone pointed me to the Crucial C300 SSD. After checking prices of the drive, it was going to cost an extra $275 bucks and I was going from a spacious 500GB drive to 128GB. After watching some of the SSD videos on YouTube I started feeling better. Below is a pic of the Crucial C300 SSD. The second thing that I needed to upgrade was the RAM. It came with 4GB of DDR3 RAM, but it was slow. I decided to buy the Crucial 8GB (4GB x 2) Kit from Newegg. This RAM cost an extra $120 and had a CAS Latency of 7. In the end this machine delivered everything that I wanted and it cost around $1300. You are probably saying, well your budget was $1200. I have spare parts that I’m planning on selling on eBay or Anandtech.  =) If you are interested then shoot me an email and I will give you a great deal mbcrump[at]gmail[dot]com. 500GB Laptop 7200RPM HDD 4GB of DDR3 RAM (2GB x 2) faceVision HD 720p Camera – Unopened In the end my Windows Experience Rating of the SSD was 7.7 and the CPU 7.1. The max that you can get is a 7.9. Part 2: The Software I’m very lucky that I get a lot of software for free. When choosing a laptop, the OS really doesn’t matter because I would never keep the bloatware pre-installed or Windows 7 Home Premium on my main development machine. Matter of fact, as soon as I got the laptop, I immediately took out the old HDD without booting into it. After I got the SSD into the machine, I installed Windows 7 Ultimate 64-Bit. The BIOS was out of date, so I updated that to the latest version and started downloading drivers off of Lenovo’s site. I had to download the Wireless Networking Drivers to a USB-Key before I could get my machine on my wireless network. I also discovered that if the date on your computer is off then you cannot join the Windows 7 Homegroup until you fix it. I’m aware that most people like peeking into what programs other software developers use and I went ahead and listed my “essentials” of a fresh build. I am a big Silverlight guy, so naturally some of the software listed below is specific to Silverlight. You should also check out my master list of Tools and Utilities for the .NET Developer. See a killer app that I’m missing? Feel free to leave it in the comments below. My Software Essential List. CPU-Z Dropbox Everything Search Tool Expression Encoder Update Expression Studio 4 Ultimate Foxit Reader Google Chrome Infragistics NetAdvantage Ultimate Edition Keepass Microsoft Office Professional Plus 2010 Microsoft Security Essentials 2  Mindscape Silverlight Elements Notepad 2 (with shell extension) Precode Code Snippet Manager RealVNC Reflector ReSharper v5.1.1753.4 Silverlight 4 Toolkit Silverlight Spy Snagit 10 SyncFusion Reporting Controls for Silverlight Telerik Silverlight RadControls TweetDeck Virtual Clone Drive Visual Studio 2010 Feature Pack 2 Visual Studio 2010 Ultimate VS KB2403277 Update to get Feature Pack 2 to work. Windows 7 Ultimate 64-Bit Windows Live Essentials 2011 Windows Live Writer Backup. Windows Phone Development Tools That is pretty much it, I have a new laptop and am happy with the purchase. If you have any questions then feel free to leave a comment below.  Subscribe to my feed

  Read the article

• Record Screen Activity with CamStudio

  - by Asian Angel

  Sometimes a visual demonstration works much better than a list of instructions. If you need to make a demo video for family and/or friends then you might want to have a look at CamStudio. Using CamStudio To get properly set up you will need to install two different files (the main program followed by the codec). Once that is done you are ready to get started. When you start the program you will see a surprisingly small window. Notice the highlighted Record to text…it serves as a visual indicator for the video type selected for recording. Before you start creating a video it would be a good idea to look through some of the settings. The first one to look at is the region or area that you want to record. Next you will want to look through the video options since these will affect the quality and final size of your video files. The default setting for quality is 70…adjust that to the level that best suits your needs. Note: For our example we maxed out the various video settings for best quality. On our system Microsoft Video 1 was listed as the default compressor but as you can see there were other options available. You can configure the settings for the compressor you want to use if desired. Keep in mind that each compressor will have unique settings of their own, so if you change it, be certain to go back and check. We decided to use the CamStudio Lossless Codec for our example (it gave the best results while trying the software). Going back to the main window you can toggle back and forth between .avi and .swf output using the last button. Once you are satisfied with the settings click on the red record button to start. If you need to pause while recording or stop recording click on the system tray icon and select the appropriate command. When you are finished recording, you will be presented with the save file window. Browse for the desired save location and name your new file. Once you have saved the file the movie player window will automatically open so that you view your new video. Our sample video shown here is at 50% of original size so may look slightly “gritty”. The detail was much better at 100%. If you decide to record and save as .swf the process will be identical to recording in .avi format until the movie player window opens. At that time the conversion process from .avi to .swf will begin. When complete you will have a new flash video and html file that goes with it. Depending on which browser you have set as default, you may run into a small problem when the preview for your new .swf file tries to open. There is a small bug in the generated html file. You can use this work-around or… Just open the .swf file directly in your favorite browser. Conclusion CamStudio may not produce the highest quality videos, but it’s free and does a very nice job nonetheless. If you are working on a tight budget or only need to make an occasional video then CamStudio is a very sensible choice. Links Download CamStudio Stable Version & CamStudio Codec *Download links are approximately half-way down the page. Download CamStudio Stable Version & CamStudio Codec at SourceForge *Beta version also available here. Similar Articles Productive Geek Tips Get the Classic Style Network Activity Indicator Back in Windows 7How To Copy a DVD with VLC 1.0ALLCapture 3.0 [Review]Listen and Record Over 12,000 Online Radio Stations with RadioSureGeek Reviews: Play And Record Internet Radio With Screamer Radio TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 TimeToMeet is a Simple Online Meeting Planning Tool Easily Create More Bookmark Toolbars in Firefox Filevo is a Cool File Hosting & Sharing Site Get a free copy of WinUtilities Pro 2010 World Cup Schedule Boot Snooze – Reboot and then Standby or Hibernate

  Read the article

• SQL SERVER – Weekly Series – Memory Lane – #006

  - by pinaldave

  Here is the list of selected articles of SQLAuthority.com across all these years. Instead of just listing all the articles I have selected a few of my most favorite articles and have listed them here with additional notes below it. Let me know which one of the following is your favorite article from memory lane. 2006 This was my very first year of blogging so I was every day learning something new. As I have said many times, that blogging was never an intention. I had really not understood what exactly I am working on or beginning when I was beginning blogging in 2006. I had never knew that my life was going to change forever, once I started blogging. When I look back all of this year, I am happy that we are here together. 2007 IT Outsourcing to India – Top 10 Reasons Companies Outsource Outsourcing is about trust, collaboration and success. Helping other countries in need has been always the course of mankind, outsourcing is nothing different then that. With information technology and process improvements increasing the complexity, costs and skills required to accomplish routine tasks as well as challenging complex tasks, companies are outsourcing such tasks to providers who have the expertise to perform them at lower costs , with greater value and quality outcome. UDF – Remove Duplicate Chars From String This was a very interesting function I wrote in my early career. I am still using this function when I have to remove duplicate chars from strings. I have yet to come across a scenario where it does not work so I keep on using it till today. Please leave a comment if there is any better solution to this problem. FIX : Error : 3702 Cannot drop database because it is currently in use This is a very generic error when DROP Database is command is executed and the database is not dropped. The common mistake user is kept the connection open with this database and trying to drop the database. The database cannot be dropped if there is any other connection open along with it. It is always a good idea to take database in single user mode before dropping it. Here is the quick tutorial regarding how to bring the database in single user mode: Using T-SQL | Using SSMS. 2008 Install SQL Server 2008 – How to Upgrade to SQL Server 2008 – Installation Tutorial This was indeed one of the most popular articles in SQL Server 2008. Lots of people wanted to learn how to install SQL SErver 2008 but they were facing various issues while installation. I build this tutorial which becomes reference points for many. Default Collation of SQL Server 2008 What is the collation of SQL Server 2008 default installations? I often see this question confusing many experienced developers as well. Well the answer is in following image. Ahmedabad SQL Server User Group Meeting – November 2008 User group meetings are fun, now a days I am going to User Group meetings every week but there was a case when I have been just a beginner on this subject. The bug of the community was caught on me years ago when I started to present in Ahmedabad and Gandhinagar SQ LServer User Groups. 2009 Validate an XML document in TSQL using XSD My friend Jacob Sebastian wrote an excellent article on the subject XML and XSD. Because of the ‘eXtensible’ nature of XML (eXtensible Markup Language), often there is a requirement to restrict and validate the content of an XML document to a pre-defined structure and values. XSD (XML Schema Definition Language) is the W3C recommended language for describing and validating XML documents. SQL Server implements XSD as XML Schema Collections. Star Join Query Optimization At present, when queries are sent to very large databases, millions of rows are returned. Also the users have to go through extended query response times when joining multiple tables are involved with such queries. ‘Star Join Query Optimization’ is a new feature of SQL Server 2008 Enterprise Edition. This mechanism uses bitmap filtering for improving the performance of some types of queries by the effective retrieval of rows from fact tables. 2010 These puzzles are very interesting and intriguing – there was lots of interest on this subject. If you have free time this weekend. You may want to try them out. SQL SERVER – Challenge – Puzzle – Usage of FAST Hint (Solution)  SQL SERVER – Puzzle – Challenge – Error While Converting Money to Decimal (Solution)  SQL SERVER – Challenge – Puzzle – Why does RIGHT JOIN Exists (Open)  Additionally, I had great fun presenting SQL Server Performance Tuning seminar at fantastic locations in Hyderabad. Installing AdventeWorks Database This has been the most popular request I have received on my blog. Here is the quick video about how one can install AdventureWorks. 2011 Effect of SET NOCOUNT on @@ROWCOUNT There was an interesting incident once while I was presenting a session. I wrote a code and suddenly 10 hands went up in the air.  This was a bit surprise to me as I do not know why they all got alerted. I assumed that there should be something wrong with either project, screen or my display. However the real reason was very interesting – I suggest you read the complete blog post to understand this interesting scenario. Error: Deleting Offline Database and Creating the Same Name This is very interesting because once a user deletes the offline database the MDF and LDF file still exists and if the user attempts to create a new database with the same name it will give error. I found this very interesting and the blog explains the concept very quickly. Have you ever faced a similar situation? Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Memory Lane, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• NDepend 4 – First Steps

  - by Ricardo Peres

  Introduction Thanks to Patrick Smacchia I had the chance to test NDepend 4. I can only say: awesome! This will be the first of a series of posts on NDepend, where I will talk about my discoveries. Keep in mind that I am just starting to use it, so more experienced users may find these too basic, I just hope I don’t say anything foolish! I must say that I am in no way affiliated with NDepend and I never actually met Patrick. Installation No installation program – a curious decision, I’m not against it -, just unzip the files to a folder and run the executable. It will optionally register itself with Visual Studio 2008, 2010 and 11 as well as RedGate’s Reflector; also, it automatically looks for updates. NDepend can either be used as a stand-alone program (with or without a GUI) or from within Visual Studio or Reflector. Getting Started One thing that really pleases me is the Getting Started section of the stand-alone, with links to pages on NDepend’s web site, featuring detailed explanations, which usually include screenshots and small videos (<5 minutes). There’s also an How do I with hierarchical navigation that guides us to through the major features so that we can easily find what we want. Usage There are two basic ways to use NDepend: Analyze .NET solutions, projects or assemblies; Compare two versions of the same assembly. I have so far not used NDepend to compare assemblies, so I will first talk about the first option. After selecting a solution and some of its projects, it generates a single HTML page with an highly detailed report of the analysis it produced. This includes some metrics such as number of lines of code, IL instructions, comments, types, methods and properties, the calculation of the cyclomatic complexity, coupling and lots of others indicators, typically grouped by type, namespace and assembly. The HTML also includes some nice diagrams depicting assembly dependencies, type and method relative proportions (according to the number of IL instructions, I guess) and assembly analysis relating to abstractness and stability. Useful, I would say. Then there’s the rules; NDepend tests the target assemblies against a set of more than 120 rules, grouped in categories Code Quality, Object Oriented Design, Design, Architecture and Layering, Dead Code, Visibility, Naming Conventions, Source Files Organization and .NET Framework Usage. The full list can be configured on the application, and an explanation of each rule can be found on the web site. Rules can be validated, violated and violated in a critical manner, and the HTML will contain the violated rules, their queries – more on this later - and results. The HTML uses some nice JavaScript effects, which allow paging and sorting of tables, so its nice to use. Similar to the rules, there are some queries that display results for a number (about 200) questions grouped as Object Oriented Design, API Breaking Changes (for assembly version comparison), Code Diff Summary (also for version comparison) and Dead Code. The difference between queries and rules is that queries are not classified as passes, violated or critically violated, just present results. The queries and rules are expressed through CQLinq, which is a very powerful LINQ derivative specific to code analysis. All of the included rules and queries can be enabled or disabled and new ones can be added, with intellisense to help. Besides the HTML report file, the NDepend application can be used to explore all analysis results, compare different versions of analysis reports and to run custom queries. Comparison to Other Analysis Tools Unlike StyleCop, NDepend only works with assemblies, not source code, so you can’t expect it to be able to enforce brackets placement, for example. It is more similar to FxCop, but you don’t have the option to analyze at the IL level, that is, other that the number of IL instructions and the complexity. What’s Next In the next days I’ll continue my exploration with a real-life test case. References The NDepend web site is http://www.ndepend.com/. Patrick keeps an updated blog on http://codebetter.com/patricksmacchia/ and he regularly monitors StackOverflow for questions tagged NDepend, which you can find on http://stackoverflow.com/questions/tagged/ndepend. The default list of CQLinq rules, queries and statistics can be found at http://www.ndepend.com/DefaultRules/webframe.html. The syntax itself is described at http://www.ndepend.com/Doc_CQLinq_Syntax.aspx and its features at http://www.ndepend.com/Doc_CQLinq_Features.aspx.

  Read the article

• The illusion of Competence

  - by tony_lombardo

  Working as a contractor opened my eyes to the developer food chain.  Even though I had similar experiences earlier in my career, the challenges seemed much more vivid this time through.  I thought I’d share a couple of experiences with you, and the lessons that can be taken from them. Lesson 1: Beware of the “funnel” guy.  The funnel guy is the one who wants you to funnel all thoughts, ideas and code changes through him.  He may say it’s because he wants to avoid conflicts in source control, but the real reason is likely that he wants to hide your contributions.  Here’s an example.  When I finally got access to the code on one of my projects, I was told by the developer that I had to funnel all of my changes through him.  There were 4 of us coding on the project, but only 2 of us working on the UI.  The other 2 were working on a separate application, but part of the overall project.  So I figured, I’ll check it into SVN, he reviews and accepts then merges in.  Not even close.  I didn’t even have checkin rights to SVN, I had to email my changes to the developer so he could check those changes in.  Lesson 2: If you point out flaws in code to someone supposedly ‘higher’ than you in the developer chain, they’re going to get defensive.  My first task on this project was to review the code, familiarize myself with it.  So of course, that’s what I did.  And in familiarizing myself with it, I saw so many bad practices and code smells that I immediately started coming up with solutions to fix it.  Of course, when I reviewed these changes with the developer (guy who originally wrote the code), he smiled and nodded and said, we can’t make those changes now, it’s too destabilizing.  I recommended we create a new branch and start working on refactoring, but branching was a new concept for this guy and he was worried we would somehow break SVN. How about some concrete examples? I started out by recommending we remove NUnit dependency and tests from the application project, and create a separate Unit testing project.  This was met with a little bit of resistance because - “How do I access the private methods?”  As it turned out there weren’t really any private methods that weren’t exposed by public methods, so I quickly calmed this fear. Win 1 Loss 0 Next, I recommended that all of the File IO access be wrapped in Using clauses, or at least properly wrapped in try catch finally.  This recommendation was accepted.. but never implemented. Win 2  Loss 1 Next recommendation was to refactor the command pattern implementation.  The command pattern was implemented, but it wasn’t really necessary for the application.  More over, the fact that we had 100 different command classes, each with it’s own specific command parameters class, made maintenance a huge hassle.  The same code repeated over and over and over.  This recommendation was declined, the code was too fragile and this change would destabilize it.  I couldn’t disagree, though it was the commands themselves in many cases that were fragile. Win 2 Loss 2 Next recommendation was to aid performance (and responsiveness) of the application by using asynchronous service calls.  This on was accepted. Win 2 Loss 3 If you’re paying any attention, you’re wondering why the async service calls was scored as a loss.. Let me explain.  The service call was made using the async pattern.  Followed by a thread.sleep  <facepalm>. Now it’s easy to be harsh on this kind of code, especially if you’re an experienced developer.  But I understood how most of this happened.  One junior guy, working as hard as he can to build his first real world application, with little or no guidance from anyone else.  He had his pattern book and theory of programming to help him, but no real world experience.  He didn’t know how difficult it would be to trace the crashes to the coding issues above, but he will one day.  The part that amazed me was the management position that “this guy should be a team lead, because he’s worked so hard”.  I’m all for rewarding hard work, but when you reward someone by promoting them past the point of their competence, you’re setting yourself and them up for failure.  And that’s lesson 3.  Just because you’ve got a hard worker, doesn’t mean he should be leading a development project.  If you’re a junior guy busting your ass, keep at it.  I encourage you to try new things, but most importantly to learn from your mistakes.  And correct your mistakes.  And if someone else looks at your code and shows you a laundry list of things that should be done differently, don’t take it personally – they’re really trying to help you.  And if you’re a senior guy, working with a junior guy, it’s your duty to point out the flaws in the code.  Even if it does make you the bad guy.  And while I’ve used “guy” above, I mean both men and women.  And in some cases mutant dinosaurs. 

  Read the article

• Memory Efficient Windows SOA Server

  - by Antony Reynolds

  Installing a Memory Efficient SOA Suite 11.1.1.6 on Windows Server Well 11.1.1.6 is now available for download so I thought I would build a Windows Server environment to run it.  I will minimize the memory footprint of the installation by putting all functionality into the Admin Server of the SOA Suite domain. Required Software 64-bit JDK SOA Suite If you want 64-bit then choose “Generic” rather than “Microsoft Windows 32bit JVM” or “Linux 32bit JVM” This has links to all the required software. If you choose “Generic” then the Repository Creation Utility link does not show, you still need this so change the platform to “Microsoft Windows 32bit JVM” or “Linux 32bit JVM” to get the software. Similarly if you need a database then you need to change the platform to get the link to XE for Windows or Linux. If possible I recommend installing a 64-bit JDK as this allows you to assign more memory to individual JVMs. Windows XE will work, but it is better if you can use a full Oracle database because of the limitations on XE that sometimes cause it to run out of space with large or multiple SOA deployments. Installation Steps The following flow chart outlines the steps required in installing and configuring SOA Suite. The steps in the diagram are explained below. 64-bit? Is a 64-bit installation required?  The Windows & Linux installers will install 32-bit versions of the Sun JDK and JRockit.  A separate JDK must be installed for 64-bit. Install 64-bit JDK The 64-bit JDK can be either Hotspot or JRockit.  You can choose either JDK 1.7 or 1.6. Install WebLogic If you are using 64-bit then install WebLogic using “java –jar wls1036_generic.jar”.  Make sure you include Coherence in the installation, the easiest way to do this is to accept the “Typical” installation. SOA Suite Required? If you are not installing SOA Suite then you can jump straight ahead and create a WebLogic domain. Install SOA Suite Run the SOA Suite installer and point it at the existing Middleware Home created for WebLogic.  Note to run the SOA installer on Windows the user must have admin privileges.  I also found that on Windows Server 2008R2 I had to start the installer from a command prompt with administrative privileges, granting it privileges when it ran caused it to ignore the jreLoc parameter. Database Available? Do you have access to a database into which you can install the SOA schema.  SOA Suite requires access to an Oracle database (it is supported on other databases but I would always use an oracle database). Install Database I use an 11gR2 Oracle database to avoid XE limitations.  Make sure that you set the database character set to be unicode (AL32UTF8).  I also disabled the new security settings because they get in the way for a developer database.  Don’t forget to check that number of processes is at least 150 and number of sessions is not set, or is set to at least 200 (in the DB init parameters). Run RCU The SOA Suite database schemas are created by running the Repository Creation Utility.  Install the “SOA and BPM Infrastructure” component to support SOA Suite.  If you keep the schema prefix as “DEV” then the config wizard is easier to complete. Run Config Wizard The Config wizard creates the domain which hosts the WebLogic server instances.  To get a minimum footprint SOA installation choose the “Oracle Enterprise Manager” and “Oracle SOA Suite for developers” products.  All other required products will be automatically selected. The “for developers” installs target the appropriate components at the AdminServer rather than creating a separate managed server to house them.  This reduces the number of JVMs required to run the system and hence the amount of memory required.  This is not suitable for anything other than a developer environment as it mixes the admin and runtime functions together in a single server.  It also takes a long time to load all the required modules, making start up a slow process. If it exists I would recommend running the config wizard found in the “oracle_common/common/bin” directory under the middleware home.  This should have access to all the templates, including SOA. If you also want to run BAM in the same JVM as everything else then you need to “Select Optional Configuration” for “Managed Servers, Clusters and Machines”. To target BAM at the AdminServer delete the “bam_server1” managed server that is created by default.  This will result in BAM being targeted at the AdminServer. Installation Issues I had a few problems when I came to test everything in my mega-JVM. Following applications were not targeted and so I needed to target them at the AdminServer: b2bui composer Healthcare UI FMW Welcome Page Application (11.1.0.0.0) How Memory Efficient is It? On a Windows 2008R2 Server running under VirtualBox I was able to bring up both the 11gR2 database and SOA/BPM/BAM in 3G memory.  I allocated a minimum 512M to the PermGen and a minimum of 1.5G for the heap.  The setting from setSOADomainEnv are shown below: set DEFAULT_MEM_ARGS=-Xms1536m -Xmx2048m set PORT_MEM_ARGS=-Xms1536m -Xmx2048m set DEFAULT_MEM_ARGS=%DEFAULT_MEM_ARGS% -XX:PermSize=512m -XX:MaxPermSize=768m set PORT_MEM_ARGS=%PORT_MEM_ARGS% -XX:PermSize=512m -XX:MaxPermSize=768m I arrived at these numbers by monitoring JVM memory usage in JConsole. Task Manager showed total system memory usage at 2.9G – just below the 3G I allocated to the VM. Performance is not stellar but it runs and I could run JDeveloper alongside it on my 8G laptop, so in that sense it was a result!

  Read the article

• ORACLE RIGHTNOW DYNAMIC AGENT DESKTOP CLOUD SERVICE - Putting the Dynamite into Dynamic Agent Desktop

  - by Andreea Vaduva

  Untitled Document There’s a mountain of evidence to prove that a great contact centre experience results in happy, profitable and loyal customers. The very best Contact Centres are those with high first contact resolution, customer satisfaction and agent productivity. But how many companies really believe they are the best? And how many believe that they can be? We know that with the right tools, companies can aspire to greatness – and achieve it. Core to this is ensuring their agents have the best tools that give them the right information at the right time, so they can focus on the customer and provide a personalised, professional and efficient service. Today there are multiple channels through which customers can communicate with you; phone, web, chat, social to name a few but regardless of how they communicate, customers expect a seamless, quality experience. Most contact centre agents need to switch between lots of different systems to locate the right information. This hampers their productivity, frustrates both the agent and the customer and increases call handling times. With this in mind, Oracle RightNow has designed and refined a suite of add-ins to optimize the Agent Desktop. Each is designed to simplify and adapt the agent experience for any given situation and unify the customer experience across your media channels. Let’s take a brief look at some of the most useful tools available and see how they make a difference. Contextual Workspaces: The screen where agents do their job. Agents don’t want to be slowed down by busy screens, scrolling through endless tabs or links to find what they’re looking for. They want quick, accurate and easy. Contextual Workspaces are fully configurable and through workspace rules apply if, then, else logic to display only the information the agent needs for the issue at hand . Assigned at the Profile level, different levels of agent, from a novice to the most experienced, get a screen that is relevant to their role and responsibilities and ensures their job is done quickly and efficiently the first time round. Agent Scripting: Sometimes, agents need to deliver difficult or sensitive messages while maximising the opportunity to cross-sell and up-sell. After all, contact centres are now increasingly viewed as revenue generators. Containing sophisticated branching logic, scripting helps agents to capture the right level of information and guides the agent step by step, ensuring no mistakes, inconsistencies or missed opportunities. Guided Assistance: This is typically used to solve common troubleshooting issues, displaying a series of question and answer sets in a decision-tree structure. This means agents avoid having to bookmark favourites or rely on written notes. Agents find particular value in these guides - to quickly craft chat and email responses. What’s more, by publishing guides in answers on support pages customers, can resolve issues themselves, without needing to contact your agents. And b ecause it can also accelerate agent ramp-up time, it ensures that even novice agents can solve customer problems like an expert. Desktop Workflow: Take a step back and look at the full customer interaction of your agents. It probably spans multiple systems and multiple tasks. With Desktop Workflows you control the design workflows that span the full customer interaction from start to finish. As sequences of decisions and actions, workflows are unique in that they can create or modify different records and provide automation behind the scenes. This means your agents can save time and provide better quality of service by having the tools they need and the relevant information as required. And doing this boosts satisfaction among your customers, your agents and you – so win, win, win! I have highlighted above some of the tools which can be used to optimise the desktop; however, this is by no means an exhaustive list. In approaching your design, it’s important to understand why and how your customers contact you in the first place. Once you have this list of “whys” and “hows”, you can design effective policies and procedures to handle each category of problem, and then implement the right agent desktop user interface to support them. This will avoid duplication and wasted effort. Five Top Tips to take away: Start by working out “why” and “how” customers are contacting you. Implement a clean and relevant agent desktop to support your agents. If your workspaces are getting complicated consider using Desktop Workflow to streamline the interaction. Enhance your Knowledgebase with Guides. Agents can access them proactively and can be published on your web pages for customers to help themselves. Script any complex, critical or sensitive interactions to ensure consistency and accuracy. Desktop optimization is an ongoing process so continue to monitor and incorporate feedback from your agents and your customers to keep your Contact Centre successful.   Want to learn more? Having attending the 3-day Oracle RightNow Customer Service Administration class your next step is to attend the Oracle RightNow Customer Portal Design and 2-day Dynamic Agent Desktop Administration class. Here you’ll learn not only how to leverage the Agent Desktop tools but also how to optimise your self-service pages to enhance your customers’ web experience.   Useful resources: Review the Best Practice Guide Review the tune-up guide   About the Author: Angela Chandler joined Oracle University as a Senior Instructor through the RightNow Customer Experience Acquisition. Her other areas of expertise include Business Intelligence and Knowledge Management.  She currently delivers the following Oracle RightNow courses in the classroom and as a Live Virtual Class: RightNow Customer Service Administration (3 days) RightNow Customer Portal Design and Dynamic Agent Desktop Administration (2 days) RightNow Analytics (2 days) Rightnow Chat Cloud Service Administration (2 days)

  Read the article

• How do I prove or disprove "god" objects are wrong?

  - by honestduane

  Problem Summary: Long story short, I inherited a code base and an development team I am not allowed to replace and the use of God Objects is a big issue. Going forward, I want to have us re-factor things but I am getting push-back from the teams who want to do everything with God Objects "because its easier" and this means I would not be allowed to re-factor. I pushed back citing my years of dev experience, that I'm the new boss who was hired to know these things, etc, and so did the third party offshore companies account sales rep, and this is now at the executive level and my meeting is tomorrow and I want to go in with a lot of technical ammo to advocate best practices because I feel it will be cheaper in the long run (And I personally feel that is what the third party is worried about) for the company. My issue is from a technical level, I know its good long term but I'm having trouble with the ultra short term and 6 months term, and while its something I "know" I cant prove it with references and cited resources outside of one person (Robert C. Martin, aka Uncle Bob), as that is what I am being asked to do as I have been told having data from one person and only one person (Robert C Martin) is not good enough of an argument. Question: What are some resources I can cite directly (Title, year published, page number, quote) by well known experts in the field that explicitly say this use of "God" Objects/Classes/Systems is bad (or good, since we are looking for the most technically valid solution)? Research I have already done: I have a number of books here and I have searched their indexes for the use of the words "god object" and "god class". I found that oddly its almost never used and the copy of the GoF book I have for example, never uses it (At least according to the index in front of me) but I have found it in 2 books per the below, but I want more I can use. I checked the Wikipedia page for "God Object" and its currently a stub with little reference links so although I personally agree with that it says, It doesn't have much I can use in an environment where personal experience is not considered valid. The book cited is also considered too old to be valid by the people I am debating these technical points with as the argument they are making is that "it was once thought to be bad but nobody could prove it, and now modern software says "god" objects are good to use". I personally believe that this statement is incorrect, but I want to prove the truth, whatever it is. In Robert C Martin's "Agile Principles, Patterns, and Practices in C#" (ISBN: 0-13-185725-8, hardcover) where on page 266 it states "Everybody knows that god classes are a bad idea. We don't want to concentrate all the intelligence of a system into a single object or a single function. One of the goals of OOD is the partitioning and distribution of behavior into many classes and many function." -- And then goes on to say sometimes its better to use God Classes anyway sometimes (Citing micro-controllers as an example). In Robert C Martin's "Clean Code: A Handbook of Agile Software Craftsmanship" page 136 (And only this page) talks about the "God class" and calls it out as a prime example of a violation of the "classes should be small" rule he uses to promote the Single Responsibility Principle" starting on on page 138. The problem I have is all my references and citations come from the same person (Robert C. Martin), and am from the same single person/source. I am being told that because he is just one guy, my desire to not use "God Classes" is invalid and not accepted as a standard best practice in the software industry. Is this true? Am I doing things wrong from a technical perspective by trying to keep to the teaching of Uncle Bob? God Objects and Object Oriented Programming and Design: The more I think of this the more I think this is more something you learn when you study OOP and its never explicitly called out; Its implicit to good design is my thinking (Feel free to correct me, please, as I want to learn), The problem is I "know" this, but but not everybody does, so in this case its not considered a valid argument because I am effectively calling it out as universal truth when in fact most people are statistically ignorant of it since statistically most people are not programmers. Conclusion: I am at a loss on what to search for to get the best additional results to cite, since they are making a technical claim and I want to know the truth and be able to prove it with citations like a real engineer/scientist, even if I am biased against god objects due to my personal experience with code that used them. Any assistance or citations would be deeply appreciated.

  Read the article

• How to UEFI install Ubuntu 12.10?

  - by Geezanansa

  Running a newer FM1 motherboard which is using an AMD 3870k APU with a new 1TB HDD. Following the advice in the motherboard manual and https://help.ubuntu.com/community/UEFI have now got to grub option screen for UEFI install. see http://imgur.com/VW5vz The dvd.iso being used is Ubuntu 12.10 desktop amd64 from ubuntu .com. The hdd has had a gpt partition table made for, by using gparted when in a live desktop session when booted in bios mode. (*edit/update: Although the old cd updates on running it is an old kernel and it did make a gpt but that version of gparted uses fdisk whereas gdisk is required to make gpt. Think am going to have to spend more time here http://www.dedoimedo.com/computers/gparted.html lol Using the gparted from 12.10 live session to make partitions; following the guidance regarding this at https://help.ubuntu.com/community/UEFI#Creating_an_EFI_partition, but can only boot to grub option screen http://imgur.com/VW5vz when 12.10 options to "try ubuntu" or "install ubuntu" are selected they give errors as described below*) but after making the gpt decided to leave it unformatted/unallocated space with the intention of using installer to set up partitions. update-originally but gparted now sees hdd as http://imgur.com/hFIvm as described above. *Booting live dvd in EFI mode gives "Secure Boot not installed" just before grub kernel option list with the option to "install ubuntu" but get "can not read cd/0" and "the kernel must be loaded first" errors; when that option is selected. Any pointers on how to get installer going for UEFI install would be good. Thanks in advance. update: Hopefully these screenshots can help better highlight where i am going wrong or if there is something else going on http://imgur.com/g30RB, http://imgur.com/VW5vz, http://imgur.com/31E0q, http://imgur.com/bnuaG, http://imgur.com/y4KGu, http://imgur.com/3u2QE, http://imgur.com/n9lN3, http://imgur.com/FEKvz, http://imgur.com/hFIvm, update: Thank you fernando garcia for pointing me in the right direction to start the process of elimantion. What i have done since asking question is a little home work starting here http://askubuntu.com/faq#bounty and here http://askubuntu.com/questions/how-to-ask. Looking at other similar questions was good fun and found this 12.10 UEFI Secure Boot install the most relative in helping getting ubuntu to uefi install on my system. In response to wolverine's question this article was referred to http://web.dodds.net/~vorlon/wiki/blog/SecureBoot_in_Ubuntu_12.10/ This article in the first sentence gives a link to http://www.ubuntu.com/download which is where i downloaded the 12.10 desktop amd64 .iso(and others) but have been unable to do a efi install of ubuntu on this system and as this is a new system have ended up just going with bios installer running which at least puts my mind at ease that i have not bricked my new mobo.(had to do a clrcmos and flash to latest bios version) So it possibly could be the bios settings or the bios version being used that is problem. To try and eliminate bios version i can not get to post screen in order to id bios version being used. Pressing tab to show post instead of logo and trying to pausebreak to catch post is proving difficult. If logo screen in bios is disabled just get black screen no post shown and pressing tab does not show post. Appreciate using appropriate bios settings and latest 12.10 release should simply get uefi installer running when selected from the grub list (nice graphic details in Identifying if computer boots the cd in efi mode section at https://help.ubuntu.com/community/UEFI#Identifying_if_the_computer_boots_the_CD_in_EFI_mode) And to confirm the hdd is booting in efi mode https://help.ubuntu.com/community/UEFI#Identifying_if_the_computer_boots_the_HDD_in_EFI_mode running the command [ -d /sys/firmware/efi ] && echo "EFI boot on HDD" || echo "Legacy boot on HDD" gave Legacy boot on HDD This is as expected because i allowed the bios installer (which was 12.04 desktop amd64 after trying 12.10 desktop amd64 in efi mode) to run to get a working installation. Which is not what was intended or wished for but wanted to get a working os to bench test new mobo i.e. prove it is working. There are other options as in installing other bootmanagers/loaders but do not wish to do so as shim should get grub2 going that is after secure boot has been signed.(Now got rough idea what should happen just it aint happening. Is it possible ahci drivers are required?) Will post boot info script url of the updated config/setup. The original question asked seems irrelevant to what is being said in this update but as the problem is not resolved will keep on trying efi installing! i.e the problem is same as when question asked just trying to update. Have tried to edit and update the best i can!

  Read the article

• SQLCMD Mode: give it one more chance

  - by Maria Zakourdaev

    - Click on me. Choose me. - asked one forgotten feature when some bored DBA was purposelessly wondering through the Management Studio menu at the end of her long and busy working day. - Why would I use you? I have heard of no one who does. What are you for? - perplexedly wondered aged and wise DBA. At least that DBA thought she was aged and wise though each day tried to prove to her that she wasn't. - I know you. You are quite lazy. Why would you do additional clicks to move from window to window? From Tool to tool ? This is irritating, isn't it? I can run windows system commands, sql statements and much more from the same script, from the same query window! - I have all my tools that I‘m used to, I have Management Studio, Cmd, Powershell. They can do anything for me. I don’t need additional tools. - I promise you, you will like me. – the thing continued to whine . - All right, show me. – she gave up. It’s always this way, she thought sadly, - easier to agree than to explain why you don’t want. - Enable me and then think about anything that you always couldn’t do through the management studio and had to use other tools. - Ok. Google for me the list of greatest features of SQL SERVER 2012. - Well... I’m not sure... Think about something else. - Ok, here is something easy for you. I want to check if file folder exists or if file is there. Though, I can easily do this using xp_cmdshell … - This is easy for me. – rejoiced the feature. By the way, having the items of the menu talking to you usually means you should stop working and go home. Or drink coffee. Or both. Well, aged and wise dba wasn’t thinking about the weirdness of the situation at that moment. - After enabling me, – said unfairly forgotten feature (it was thinking of itself in such manner) – after enabling me you can use all command line commands in the same management studio query window by adding two exclamation marks !! at the beginning of the script line to denote that you want to use cmd command: -Just keep in mind that when using this feature, you are actually running the commands ON YOUR computer and not on SQL server that query window is connected to. This is main difference from using xp_cmdshell which is executing commands on sql server itself. Bottomline, use UNC path instead of local path. - Look, there are much more than that. - The SQLCMD feature was getting exited.- You can get IP of your servers, create, rename and drop folders. You can see the contents of any file anywhere and even start different tools from the same query window: Not so aged and wise DBA was getting interested: - I also want to run different scripts on different servers without changing connection of the query window. - Sure, sure! Another great feature that CMDmode is providing us with and giving more power to querying. Use “:” to use additional features, like :connect that allows you to change connection: - Now imagine, you have one script where you have all your changes, like creating staging table on the DWH staging server, adding fact table to DWH itself and updating stored procedures in the server where reporting database is located. - Now, give me more challenges! - Script out a list of stored procedures into the text files. - You can do it easily by using command :out which will write the query results into the specified text file. The output can be the code of the stored procedure or any data. Actually this is the same as changing the query output into the file instead of the grid. - Now, take all of the scripts and run all of them, one by one, on the different server.  - Easily - Come on... I’m sure that you can not... -Why not? Naturally, I can do it using :r commant which is opening a script and executing it. Look, I can also use :setvar command to define an environment variable in SQLCMD mode. Just note that you have to leave the empty string between :r commands, otherwise it’s not working although I have no idea why. - Wow.- She was really impressed. - Ok, I’ll go to try all those… -Wait, wait! I know how to google the SQL SERVER features for you! This example will open chrome explorer with search results for the “SQL server 2012 top features” ( change the path to suit your PC): “Well, this can be probably useful stuff, maybe this feature is really unfairly forgotten”, thought the DBA while going through the dark empty parking lot to her lonely car. “As someone really wise once said: “It is what we think we know that keeps us from learning. Learn, unlearn and relearn”.

  Read the article

• ASP.NET Web Forms Extensibility: Handler Factories

  - by Ricardo Peres

  An handler factory is the class that implements IHttpHandlerFactory and is responsible for instantiating an handler (IHttpHandler) that will process the current request. This is true for all kinds of web requests, whether they are for ASPX pages, ASMX/SVC web services, ASHX/AXD handlers, or any other kind of file. Also used for restricting access for certain file types, such as Config, Csproj, etc. Handler factories are registered on the global Web.config file, normally located at %WINDIR%\Microsoft.NET\Framework<x64>\vXXXX\Config for a given path and request type (GET, POST, HEAD, etc). This goes on section <httpHandlers>. You would create a custom handler factory for a number of reasons, let me list just two: A centralized place for using dependency injection; Also a centralized place for invoking custom methods or performing some kind of validation on all pages. Let’s see an example using Unity for injecting dependencies into a page, suppose we have this on Global.asax.cs: 1: public class Global : HttpApplication 2: { 3: internal static readonly IUnityContainer Unity = new UnityContainer(); 4: 5: void Application_Start(Object sender, EventArgs e) 6: { 7: Unity.RegisterType<IFunctionality, ConcreteFunctionality>(); 8: } 9: } We instantiate Unity and register a concrete implementation for an interface, this could/should probably go in the Web.config file. Forget about its actual definition, it’s not important. Then, we create a custom handler factory: 1: public class UnityPageHandlerFactory : PageHandlerFactory 2: { 3: public override IHttpHandler GetHandler(HttpContext context, String requestType, String virtualPath, String path) 4: { 5: IHttpHandler handler = base.GetHandler(context, requestType, virtualPath, path); 6: 7: //one scenario: inject dependencies 8: Global.Unity.BuildUp(handler.GetType(), handler, String.Empty); 9:  10: return (handler); 11: } 12: } It inherits from PageHandlerFactory, which is .NET’s included factory for building regular ASPX pages. We override the GetHandler method and issue a call to the BuildUp method, which will inject required dependencies, if any exist. An example page with dependencies might be: 1: public class SomePage : Page 2: { 3: [Dependency] 4: public IFunctionality Functionality 5: { 6: get; 7: set; 8: } 9: } Notice the DependencyAttribute, it is used by Unity to identify properties that require dependency injection. When BuildUp is called, the Functionality property (or any other properties with the DependencyAttribute attribute) will receive the concrete implementation associated with it’s type, as registered on Unity. Another example, checking a page for authorization. Let’s define an interface first: 1: public interface IRestricted 2: { 3: Boolean Check(HttpContext ctx); 4: } An a page implementing that interface: 1: public class RestrictedPage : Page, IRestricted 2: { 3: public Boolean Check(HttpContext ctx) 4: { 5: //check the context and return a value 6: return ...; 7: } 8: } For this, we would use an handler factory such as this: 1: public class RestrictedPageHandlerFactory : PageHandlerFactory 2: { 3: private static readonly IHttpHandler forbidden = new UnauthorizedHandler(); 4:  5: public override IHttpHandler GetHandler(HttpContext context, String requestType, String virtualPath, String path) 6: { 7: IHttpHandler handler = base.GetHandler(context, requestType, virtualPath, path); 8: 9: if (handler is IRestricted) 10: { 11: if ((handler as IRestricted).Check(context) == false) 12: { 13: return (forbidden); 14: } 15: } 16:  17: return (handler); 18: } 19: } 20:  21: public class UnauthorizedHandler : IHttpHandler 22: { 23: #region IHttpHandler Members 24:  25: public Boolean IsReusable 26: { 27: get { return (true); } 28: } 29:  30: public void ProcessRequest(HttpContext context) 31: { 32: context.Response.StatusCode = (Int32) HttpStatusCode.Unauthorized; 33: context.Response.ContentType = "text/plain"; 34: context.Response.Write(context.Response.Status); 35: context.Response.Flush(); 36: context.Response.Close(); 37: context.ApplicationInstance.CompleteRequest(); 38: } 39:  40: #endregion 41: } The UnauthorizedHandler is an example of an IHttpHandler that merely returns an error code to the client, but does not cause redirection to the login page, it is included merely as an example. One thing we must keep in mind is, there can be only one handler factory registered for a given path/request type (verb) tuple. A typical registration would be: 1: <httpHandlers> 2: <remove path="*.aspx" verb="*"/> 3: <add path="*.aspx" verb="*" type="MyNamespace.MyHandlerFactory, MyAssembly"/> 4: </httpHandlers> First we remove the previous registration for ASPX files, and then we register our own. And that’s it. A very useful mechanism which I use lots of times.

  Read the article

• Rip and Convert DVD’s to an ISO Image

  - by Mysticgeek

  If you own a lot of DVD’s, you might want to convert them to an ISO image for backup and easily playing them on your media center. Today we take a look at ripping your discs using DVDFab, then using ImgBurn to create an ISO image of the ripped DVD files. Rip DVD with DVDFab6 DVDFab will remove copy protection and rip the DVD files for free. Other components in the suite require you to purchase a license after the 30 day trial, but you’ll still be able to rip DVD’s after the trial. Install DVDFab by accepting the defaults (link below)…a system restart is required to complete the install process. The first time you run it, a welcome screen is displayed. If you don’t want to see it again check the box Do not show again, then Start DVDFab.  Pop the DVD in your drive and click Next. Now select your region and check Do not show again, then OK. It will then open the DVD and begin to scan it. Under DVD to DVD you can select either Full Disc or Main Movie depending on what you want to rip. If you want to burn the DVD to a disc after it’s created select the Full Disc option. Now click the Start button to begin the ripping process. After the ripping process has completed, you’ll get a message telling you it’s waiting for you to put in a blank DVD. Since we aren’t burning the disc, just cancel the message. Click Finish and close out of DVDFab or just minimize it if you’re going to keep using it to rip another DVD. By default the temporary directory is in My Documents \ DVDFab \ Temp…however you can change it in settings. If you go to the Temp directory you’ll see the DVD files listed there… Convert Files to ISO with ImgBurn Now that we have the files ripped from the DVD, we need to convert them to an ISO image using ImgBurn (link below). Open it up and from the main menu click on Create image file from files/folders. Click on the folder icon to browse to the location of the ripped DVD files. Browse to the DVDFab temp directory and the VIDEO_TS folder for the source and click Ok. Then choose a destination directory, give the ISO a name, and click Save. In this case we ripped the Unbreakable DVD, so named it that.   So now in ImgBurn you have the source being the ripped DVD files, and the destination for the ISO…then click the Build button. If you don’t create a volume label, ImgBurn is kind enough to create on for you. If everything looks correct, click Ok. Now wait while ImgBurn goes through the process of converting the ripped DVD files to an ISO image. The process has successfully completed. The ISO image of the DVD will be in the output directory you selected earlier. Now you can burn the ISO image to a blank DVD or store it on an external hard drive for safe keeping. When you’re done, you’ll probably want to go into the temp DVDFab folder and delete the VOB and other files in the Video_TS folder as they will take up a lot of space on your hard drive.   Conclusion Although this method requires two programs to make an ISO out of a DVD, it’s extremely quick. When burning DVD’s of various lengths, it took less than 30 minutes to get the final ISO. Now, you’ll have your DVD movies backed up in case something were to happen to the discs and are no longer playable. If you use Windows Media Center to watch your movies, check out our article on how to automatically mount and view ISO files in Windows 7 Media Center. With DVDFab, you get a 30 day fully functional trial for all of its features. You’ll still be able rip DVD’s even after the 30 day trial has ended. The more we’ve been using DVDFab, the more impressed we are with its capabilities, so after the 30 day trial you should consider purchasing a license. We will have a full review of the of it to share with you soon.  Download DVDFab Download ImgBurn Similar Articles Productive Geek Tips How To Rip DVDs with VLCCalculate with Qalculate on LinuxConvert a Row to a Column in Excel the Easy WayEnjoy Quick & Easy Unit Conversion with Convert for WindowsConvert Older Excel Documents to Excel 2007 Format TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Beware Hover Kitties Test Drive Mobile Phones Online With TryPhone Ben & Jerry’s Free Cone Day, 3/23/10 New Stinger from McAfee Helps Remove ‘FakeAlert’ Threats Google Apps Marketplace: Tools & Services For Google Apps Users Get News Quick and Precise With Newser

  Read the article

• A Semantic Model For Html: TagBuilder and HtmlTags

  - by Ryan Ohs

  In this post I look into the code smell that is HTML literals and show how we can refactor these pesky strings into a friendlier and more maintainable model.   The Problem When I started writing MVC applications, I quickly realized that I built a lot of my HTML inside HtmlHelpers. As I did this, I ended up moving quite a bit of HTML into string literals inside my helper classes. As I wanted to add more attributes (such as classes) to my tags, I needed to keep adding overloads to my helpers. A good example of this end result is the default html helpers that come with the MVC framework. Too many overloads make me crazy! The problem with all these overloads is that they quickly muck up the API and nobody can remember exactly what order the parameters go in. I've seen many presenters (including members of the ASP.NET MVC team!) stumble before realizing that their view wasn't compiling because they needed one more null parameter in the call to Html.ActionLink(). What if instead of writing Html.ActionLink("Edit", "Edit", null, new { @class = "navigation" }) we could do Html.LinkToAction("Edit").Text("Edit").AddClass("navigation") ? Wouldn't that be much easier to remember and understand?  We can do this if we introduce a semantic model for building our HTML.   What is a Semantic Model? According to Martin Folwer, "a semantic model is an in-memory representation, usually an object model, of the same subject that the domain specific language describes." In our case, the model would be a set of classes that know how to render HTML. By using a semantic model we can free ourselves from dealing with strings and instead output the HTML (typically via ToString()) once we've added all the elements and attributes we desire to the model. There are two primary semantic models available in ASP.NET MVC: MVC 2.0's TagBuilder and FubuMVC's HtmlTags.   TagBuilder TagBuilder is the html builder that is available in ASP.NET MVC 2.0. I'm not a huge fan but it gets the job done -- for simple jobs.  Here's an overview of how to use TagBuilder. See my Tips section below for a few comments on that example. The disadvantage of TagBuilder is that unless you wrap it up with our own classes, you still have to write the actual tag name over and over in your code. eg. new TagBuilder("div") instead of new DivTag(). I also think it's method names are a little too long. Why not have AddClass() instead of AddCssClass() or Text() instead of SetInnerText()? What those methods are doing should be pretty obvious even in the short form. I also don't like that it wants to generate an id attribute from your input instead of letting you set it yourself using external conventions. (See GenerateId() and IdAttributeDotReplacement)). Obviously these come from Microsoft's default approach to MVC but may not be optimal for all programmers.   HtmlTags HtmlTags is in my opinion the much better option for generating html in ASP.NET MVC. It was actually written as a part of FubuMVC but is available as a stand alone library. HtmlTags provides a much cleaner syntax for writing HTML. There are classes for most of the major tags and it's trivial to create additional ones by inheriting from HtmlTag. There are also methods on each tag for the common attributes. For instance, FormTag has an Action() method. The SelectTag class allows you to set the default option or first option independent from adding other options. With TagBuilder there isn't even an abstraction for building selects! The project is open source and always improving. I'll hopefully find time to submit some of my own enhancements soon.   Tips 1) It's best not to have insanely overloaded html helpers. Use fluent builders. 2) In html helpers, return the TagBuilder/tag itself (not a string!) so that you can continue to add attributes outside the helper; see my first sample above. 3) Create a static entry point into your builders. I created a static Tags class that gives me access all the HtmlTag classes I need. This way I don't clutter my code with "new" keywords. eg. Tags.Div returns a new DivTag instance. 4) If you find yourself doing something a lot, create an extension method for it. I created a Nest() extension method that reads much more fluently than the AddChildren() method. It also accepts a params array of tags so I can very easily nest many children.   I hope you have found this post helpful. Join me in my war against HTML literals! I’ll have some more samples of how I use HtmlTags in future posts.

  Read the article

• ORA-7445 Troubleshooting

  - by [email protected]

      QUICKLINK: Note 153788.1 ORA-600/ORA-7445 Lookup tool Note 1082674.1 : A Video To Demonstrate The Usage Of The ORA-600/ORA-7445 Lookup Tool [Video]   Have you observed an ORA-07445 error reported in your alert log? While the ORA-600 error is "captured" as a handled exception in the Oracle source code, the ORA-7445 is an unhandled exception error due to an OS exception which should result in the creation of a core file.  An ORA-7445 is a generic error, and can occur from anywhere in the Oracle code. The precise location of the error is identified by the core file and/or trace file it produces.  Looking for the best way to diagnose? Whenever an ORA-7445 error is raised a core file is generated.  There may be a trace file generated with the error as well.   Prior to 11g, the core files are located in the CORE_DUMP_DEST directory.   Starting with 11g, there is a new advanced fault diagnosability infrastructure to manage trace data.  Diagnostic files are written into a root directory for all diagnostic data called the ADR home.   Core files at 11g will go to the ADR HOME/cdump directory.   For more information on the Oracle 11g Diagnosability feature see Note 453125.1 11g Diagnosability Frequently Asked Questions Note 443529.1 11g Quick Steps to Package and Send Critical Error Diagnostic Information to Support[Video]   NOTE:  While the core file is captured in the Diagnosability infrastructure, the file may not be included with a diagnostic package.1.  Check the Alert LogThe alert log may indicate additional errors or other internal errors at the time of the problem.   In some cases, the ORA-7445 error will occur along with ORA-600, ORA-3113, ORA-4030 errors.  The ORA-7445 error can be side effects of the other problems and you should review the first error and associated core file or trace file and work down the list of errors.   Note 1020463.6 DIAGNOSING ORA-3113 ERRORS Note 1812.1 TECH:  Getting a Stack Trace from a CORE file Note 414966.1 RDA Documentation Index   If the ORA-7445 errors are not associated with other error conditions, ensure the trace data is not truncated. If you see a message at the end of the file   "MAX DUMP FILE SIZE EXCEEDED"   the MAX_DUMP_FILE_SIZE parameter is not setup high enough or to 'unlimited'. There could be vital diagnostic information missing in the file and discovering the root issue may be very difficult.  Set the MAX_DUMP_FILE_SIZE appropriately and regenerate the error for complete trace information. For pointers on deeper analysis of these errors see   Note 390293.1 Introduction to 600/7445 Internal Error Analysis Note 211909.1 Customer Introduction to ORA-7445 Errors 2.  Search 600/7445 Lookup Tool Visit My Oracle Support to access the ORA-00600 Lookup tool (Note 153788.1). The ORA-600/ORA-7445 Lookup tool may lead you to applicable content in My Oracle Support on the problem and can be used to investigate the problem with argument data from the error message or you can pull out key stack pointers from the associated trace file to match up against known bugs.3.  "Fine tune" searches in Knowledge Base As the ORA-7445 error indicates an unhandled exception in the Oracle source code, your search in the Oracle Knowledge Base will need to focus on the stack data from the core file or the trace file. Keep in mind that searches on generic argument data will bring back a large result set.  The more you can learn about the environment and code leading to the errors, the easier it will be to narrow the hit list to match your problem. Note 153788.1 ORA-600/ORA-7445 TroubleshooterNote 1082674.1 A Video To Demonstrate The Usage Of The ORA-600/ORA-7445 Lookup Tool [Video] NOTE:  If no trace file is captured, see Note 1812.1 TECH:  Getting a Stack Trace from a CORE file.  Core files are managed through 11g Diagnosability, but are not packaged with other diagnostic data automatically.  The core files can be quite large, but may be useful during analysis within Oracle Support.4.  If assistance is required from Oracle Should it become necessary to get assistance from Oracle Support on an ORA-7445 problem, please provide at a minimum, the Alert log  Associated tracefile(s) or incident package at 11g Patch level  information Core file(s)  Information about changes in configuration and/or application prior to  issues  If error is reproducible, a self-contained reproducible testcase: Note.232963.1 How to Build a Testcase for Oracle Data Server Support to Reproduce ORA-600 and ORA-7445 Errors RDA report or Oracle Configuration Manager information Oracle Configuration Manager Quick Start Guide Note 548815.1 My Oracle Support Configuration Management FAQ Note 414966.1 RDA Documentation Index ***For reference to the content in this blog, refer to Note.1092832.1 Master Note for Diagnosing ORA-600

  Read the article

• Maintaining packages with code - Adding a property expression programmatically

  Every now and then I've come across scenarios where I need to update a lot of packages all in the same way. The usual scenario revolves around a group of packages all having been built off the same package template, and something needs to updated to keep up with new requirements, a new logging standard for example.You'd probably start by updating your template package, but then you need to address all your existing packages. Often this can run into the hundreds of packages and clearly that's not a job anyone wants to do by hand. I normally solve the problem by writing a simple console application that looks for files and patches any package it finds, and it is an example of this I'd thought I'd tidy up a bit and publish here. This sample will look at the package and find any top level Execute SQL Tasks, and change the SQL Statement property to use an expression. It is very simplistic working on top level tasks only, so nothing inside a Sequence Container or Loop will be checked but obviously the code could be extended for this if required. The code that actually sets the expression is shown below, the rest is just wrapper code to find the package and to find the task. /// <summary> /// The CreationName of the Tasks to target, e.g. Execute SQL Task /// </summary> private const string TargetTaskCreationName = "Microsoft.SqlServer.Dts.Tasks.ExecuteSQLTask.ExecuteSQLTask, Microsoft.SqlServer.SQLTask, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91"; /// <summary> /// The name of the task property to target. /// </summary> private const string TargetPropertyName = "SqlStatementSource"; /// <summary> /// The property expression to set. /// </summary> private const string ExpressionToSet = "@[User::SQLQueryVariable]"; .... // Check if the task matches our target task type if (taskHost.CreationName == TargetTaskCreationName) { // Check for the target property if (taskHost.Properties.Contains(TargetPropertyName)) { // Get the property, check for an expression and set expression if not found DtsProperty property = taskHost.Properties[TargetPropertyName]; if (string.IsNullOrEmpty(property.GetExpression(taskHost))) { property.SetExpression(taskHost, ExpressionToSet); changeCount++; } } } This is a console application, so to specify which packages you want to target you have three options: Find all packages in the current folder, the default behaviour if no arguments are specified TaskExpressionPatcher.exe .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Find all packages in a specified folder, pass the folder as the argument TaskExpressionPatcher.exe C:\Projects\Alpha\Packages\ .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Find a specific package, pass the file path as the argument TaskExpressionPatcher.exe C:\Projects\Alpha\Packages\Package.dtsx The code was written against SQL Server 2005, but just change the reference to Microsoft.SQLServer.ManagedDTS to be the SQL Server 2008 version and it will work fine. If you get an error Microsoft.SqlServer.Dts.Runtime.DtsRuntimeException: The package failed to load due to error 0xC0011008… then check that the package is from the correct version of SSIS compared to the referenced assemblies, 2005 vs 2008 in other words. Download Sample Project TaskExpressionPatcher.zip (6 KB)

  Read the article

• SQL SERVER – Beginning New Weekly Series – Memory Lane – #001

  - by pinaldave

  I am introducing a new series today.  This series is called “Memory Lane.”  From the last six years and 2,300 articles, there are fantastic articles I keep revisiting.  Sometimes when I read old blog posts I think I should have included something or added a bit more to the topic.  But for many articles, I still feel they are fantastic (even after six years) and could be read again and again. I have also found that after six years of blogging, readers will write to me and say “Pinal, why don’t you write about X, Y or Z.”  The answer is: I already did!  It is here on the blog, or in the comments, or possibly in one of my books.  The solution has always been there, it is simply a matter of finding it and presenting it again.  That is why I have created Memory Lane.  I will be listing the best articles from the same week of the past six years.  You will find plenty of reading material every Saturday from articles of SQLAuthority past. Here is the list of curetted articles of SQLAuthority.com across all these years. Instead of just listing all the articles I have selected a few of my most favorite articles and have listed them here with additional notes below it. Let me know which one of the following is your favorite article from memory lane. 2006 Query to Display Foreign Key Relationships and Name of the Constraint for Each Table in Database My blogging journey began with this blog post. As many of you know my journey began with creating a repository of my scripts. This was very first script which I had written to find out foreign key relationship and constraints. The same query was updated later on using the new SYS schema modification in SQL Server. Version 1: Using sys.schema Version 2: Using sys.schema and additional columns 2007 Milestone Posts – 1 Year (365 blogs) and 1 Million Views When I reached 1st week of Nov in 2007 SQLAuthority.com blog had around 365 blog posts and 1 Million Views. I was not obsessed with the statistics before but this was indeed an interesting moment for me as I was blogging for myself and did not realize that so many people are reading my blog. In year 2006 there were not many bloggers so blogging was new to me as well. I was learning it as I go. 2008 Stored Procedure WITH ENCRYPTION and Execution Plan If you have stored procedure and its code is encrypted when you execute it what will be displayed in the execution plan. There are two kinds of execution plans 1) Estimated and 2) Actual. It will be indeed interesting to know what is displayed in both the cases when Stored Procedure is encrypted. What is your guess? Now go ahead and click on here and figure out your answer. If the user is not able to login into SQL Server due to any error or issues there were two different blog post addresses the same issue here and here. 2009 It seems like Nov is the month of SQLPASS month. In 2009 on the same week I was in USA attending SQLPASS event. I had a fantastic experience attending the event. Here are the blog posts covering the subject Day 1, Day 2, Day 3, Day 4 2010 Finding the last backup time for all the databases This little script is very powerful and instantly gives details when was the last time your database backup performed. If you are reading this blog post – I say just go ahead and check if everything is alright on your server and you have all the necessary latest backup. It is better to be safe than sorrow. Version 1: Above script was improved to get more details about the database Version 2: This version of the script will include pretty much have all the backup related information in a single script. Do not miss to save it for future use. Are you a Database Administrator or a Database Developer? Three years ago I created a very small survey and the results which I have received are very interesting. The question was asking what is the profile of the visitor of that blog post and I noticed that DBA and Developers have balanced with little inclination towards Developers. Have you voted so far? If not, go ahead! 2011 New Book Released – SQL Server Interview Questions And Answers One year ago, on November 3, 2011 I published my book SQL Server Interview Questions and Answers.  The book has a lot of great reviews, and we have even received emails telling us this book was a life changer because it helped get them a great new job.  I don’t think anyone can get a job just from my book.  It was the individual who studied hard and took it seriously, and was determined to learn something new.  The book might have helped guide them and show them the topics to study, but they spent their own energy on it.  It was their own skills that helped them pass the exam. So, in this very first installment, I would like to thank the readers for accepting our book, for giving it great reviews and for using it and sharing it.  Our goal in writing this book was to help others, and it seems like we succeeded. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Memory Lane, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• In the Mobile and Tablet World, How Much is Too Much?

  - by andrewbrust

  The week of April 26th was a huge one in the world of mobile and tablet devices,  There were so many individual developments, announcements and solidifications of strategy, it’s almost impossible to believe they occurred in the same month, let alone the same week. Things started with Apple and Gizmodo having a Law and Order moment over the latter’s procurement of what appears to be the former’s 4th gen iPhone prototype.  We found out on the 26th that Gizmodo blogger Jason Chen’s apartment was raided by police and, honestly, that was a bit much. But Apple didn’t stop there.  They also published Steve Job’s critique of Adobe Flash and his explanation of Cupertino’s embargo of Flash on iPhones, iPods and iPads.  If you ask me, this too, was a bit much. Apple finished up the week by releasing the 3G version of its iPad product to the US market. I like (iLike?) my WiFi iPad.  The idea of getting a version of it that required a second 3G service monthly subscription, is, well, a bit  much. Microsoft was in the news too.  It killed a project it hadn’t even acknowledged the existence of: the Courier tablet.  That’s a bit much too.  If a tree falls in the woods, and Microsoft says they can’t hear it anyway, could they really have chopped it down? Maybe Microsoft Research should have licensed some of Courier’s technology from other parts of Microsoft.  Then maybe they could have kept the product alive.  Ask HTC: they’re going to be licensing technology from Microsoft because Redmond insists that Google’s Android operating system infringes on certain of their patents.  And since HTC now builds a number of handsets on Android, instead of being beholden, as they once were, to Windows Mobile, that means they can keep making their products.  Why does HTC have to pay the royalties, and not Google?  Maybe Microsoft decided that going after GOOG would have been a bit much, even for them. The agreement came not a moment to soon: HTC released their “Droid Incredible” (that name’s a bit much), an Android 2.1 handset with amazing hardware and HTC’s own Sense UI, on April 30th (this past Friday). This phone is very well-reviewed.  Maybe that’s why Google basically decided to beg off introducing a version of its Nexus One phone (also manufactured by HTC) on the Verizon Wireless network.  Google backing down?  That’s incredible, if not also a bit much. And that brings us to HP.  Which this week announced its acquisition of Palm and its webOS mobile phone touch-oriented operating system.  HP also killed its own Slate initiative.  Apparently HP realized that Windows 7, even with a proprietary HP touch UI added on top, is no match for the iPad.  I’m guessing they think webOS might work a bit better,  And I’m wondering if HP even wants to use webOS for phone handsets, beyond the Pre and Pixi.  Using it just for slate devices would be a bit extreme, but maybe not too much. Honestly, this was not Microsoft’s best week.  It killed a project and a close partner did likewise.  Then that same partner bought a competing OS product, while another partner released their new product that uses yet another competing OS platform. What did Microsoft actually produce this past week? An update to its Windows Phone 7 developer tools that actually works with the version of Visual Studio 2010 released on April 12th, and the version of Silverlight released three days later. That took three weeks to get synced up, and that’s a bit much too. But at least it happened. Windows Phone 7 is Microsoft’s best hope for a comeback in the SmartPhone market and to offer a credible touch-based tablet device.  This week, two of Microsoft’s slate initiatives died, and its only mobile phone victory was around its competitor’s operating system.  I hope the new platform gets Redmond out of the PC ghetto and into the classes of device that get people really excited today.  If it can’t, that would be a bit much; probably too much.  And, as the signs at the Lonestar Cafe in NYC used to say, too much ain’t enough.

  Read the article

• Amanda Todd&ndash;What Parents Can Learn From Her Story

  - by D'Arcy Lussier

  Amanda Todd was a bullied teenager who committed suicide this week. Her story has become headline news due in part to her You Tube video she posted telling her story:   The story is heartbreaking for so many reasons, but I wanted to talk about what we as parents can learn from this. Being the dad to two girls, one that’s 10, I’m very aware of the dangers that the internet holds. When I saw her story, one thing jumped out at me – unmonitored internet access at an early age. My daughter (then 9) came home from a friends place once and asked if she could be in a YouTube video with her friend. Apparently this friend was allowed to do whatever she wanted on the internet, including posting goofy videos. This set off warning bells and we ensured our daughter realized the dangers and that she was not to ever post videos of herself. In looking at Amanda’s story, the access to unmonitored internet time along with just being a young girl and being flattered by an online predator were the key events that ultimately led to her suicide. Yes, the reaction of her classmates and “friends” was horrible as well, I’m not diluting that. But our youth don’t fully understand yet that what they do on the internet today will follow them potentially forever. And the people they meet online aren’t necessarily who they claim to be. So what can we as parents learn from Amanda’s story? Parents Shouldn’t Feel Bad About Being Internet Police Our job as parents is in part to protect our kids and keep them safe, even if they don’t like our measures. This includes monitoring, supervising, and restricting their internet activities. In our house we have a family computer in the living room that the kids can watch videos and surf the web. It’s in plain view of everyone, so you can’t hide what you’re looking at. If our daughter goes to a friend’s place, we ask about what they did and what they played. If the computer comes up, we ask about what they did on it. Luckily our daughter is very up front and honest in telling us things, so we have very open discussions. Parents Need to Be Honest About the Dangers of the Internet I’m sure every generation says that “kids grow up so fast these days”, but in our case the internet really does push our kids to be exposed to things they otherwise wouldn’t experience. One wrong word in a Google search, a click of a link in a spam email, or just general curiosity can expose a child to things they aren’t ready for or should never be exposed to (and I’m not just talking about adult material – have you seen some of the graphic pictures from war zones posted on news sites recently?). Our stance as parents has been to be open about discussing the dangers with our kids before they encounter any content – be proactive instead of reactionary. Part of this is alerting them to the monsters that lurk on the internet as well. As kids explore the world wide web, they’re eventually going to encounter some chat room or some Facebook friend invite or other personal connection with someone. More than ever kids need to be educated on the dangers of engaging with people online and sharing personal information. You can think of it as an evolved discussion that our parents had with us about using the phone: “Don’t say ‘I’m home alone’, don’t say when mom or dad get home, don’t tell them any information, etc.” Parents Need to Talk Self Worth at Home Katie makes the point better than I ever could (one bad word towards the end): Our children need to understand their value beyond what the latest issue of TigerBeat says, or the media who continues flaunting physical attributes over intelligence and character, or a society that puts focus on status and wealth. They also have to realize that just because someone pays you a compliment, that doesn’t mean you should ignore personal boundaries and limits. What does this have to do with the internet? Well, in days past if you wanted to be social you had to go out somewhere. Now you can video chat with any number of people from the comfort of wherever your laptop happens to be – and not just text but full HD video with sound! While innocent children head online in the hopes of meeting cool people, predators with bad intentions are heading online too. As much as we try to monitor their online activity and be honest about the dangers of the internet, the human side of our kids isn’t something we can control. But we can try to influence them to see themselves as not needing to search out the acceptance of complete strangers online. Way easier said than done, but ensuring self-worth is something discussed, encouraged, and celebrated is a step in the right direction. Parental Wake Up Call This post is not a critique of Amanda’s parents. The reality is that cyber bullying/abuse is happening every day, and there are millions of parents that have no clue its happening to their children. Amanda’s story is a wake up call that our children’s online activities may be putting them in danger. My heart goes out to the parents of this girl. As a father of daughters, I can’t imagine what I would do if I found my daughter having to hide in a ditch to avoid a mob or call 911 to report my daughter had attempted suicide by drinking bleach or deal with a child turning to drugs/alcohol/cutting to cope. It would be horrendous if we as parents didn’t re-evaluate our family internet policies in light of this event. And in the end, Amanda’s video was meant to bring attention to her plight and encourage others going through the same thing. We may not be kids, but we can still honour her memory by helping safeguard our children.

  Read the article

• problem with loading in .FBX meshes in DirectX 10

  - by N0xus

  I'm trying to load in meshes into DirectX 10. I've created a bunch of classes that handle it and allow me to call in a mesh with only a single line of code in my main game class. How ever, when I run the program this is what renders: In the debug output window the following errors keep appearing: D3D10: ERROR: ID3D10Device::DrawIndexed: Input Assembler - Vertex Shader linkage error: Signatures between stages are incompatible. The reason is that Semantic 'TEXCOORD' is defined for mismatched hardware registers between the output stage and input stage. [ EXECUTION ERROR #343: DEVICE_SHADER_LINKAGE_REGISTERINDEX ] D3D10: ERROR: ID3D10Device::DrawIndexed: Input Assembler - Vertex Shader linkage error: Signatures between stages are incompatible. The reason is that the input stage requires Semantic/Index (POSITION,0) as input, but it is not provided by the output stage. [ EXECUTION ERROR #342: DEVICE_SHADER_LINKAGE_SEMANTICNAME_NOT_FOUND ] The thing is, I've no idea how to fix this. The code I'm using does work and I've simply brought all of that code into a new project of mine. There are no build errors and this only appears when the game is running The .fx file is as follows: float4x4 matWorld; float4x4 matView; float4x4 matProjection; struct VS_INPUT { float4 Pos:POSITION; float2 TexCoord:TEXCOORD; }; struct PS_INPUT { float4 Pos:SV_POSITION; float2 TexCoord:TEXCOORD; }; Texture2D diffuseTexture; SamplerState diffuseSampler { Filter = MIN_MAG_MIP_POINT; AddressU = WRAP; AddressV = WRAP; }; // // Vertex Shader // PS_INPUT VS( VS_INPUT input ) { PS_INPUT output=(PS_INPUT)0; float4x4 viewProjection=mul(matView,matProjection); float4x4 worldViewProjection=mul(matWorld,viewProjection); output.Pos=mul(input.Pos,worldViewProjection); output.TexCoord=input.TexCoord; return output; } // // Pixel Shader // float4 PS(PS_INPUT input ) : SV_Target { return diffuseTexture.Sample(diffuseSampler,input.TexCoord); //return float4(1.0f,1.0f,1.0f,1.0f); } RasterizerState NoCulling { FILLMODE=SOLID; CULLMODE=NONE; }; technique10 Render { pass P0 { SetVertexShader( CompileShader( vs_4_0, VS() ) ); SetGeometryShader( NULL ); SetPixelShader( CompileShader( ps_4_0, PS() ) ); SetRasterizerState(NoCulling); } } In my game, the .fx file and model are called and set as follows: Loading in shader file //Set the shader flags - BMD DWORD dwShaderFlags = D3D10_SHADER_ENABLE_STRICTNESS; #if defined( DEBUG ) || defined( _DEBUG ) dwShaderFlags |= D3D10_SHADER_DEBUG; #endif ID3D10Blob * pErrorBuffer=NULL; if( FAILED( D3DX10CreateEffectFromFile( TEXT("TransformedTexture.fx" ), NULL, NULL, "fx_4_0", dwShaderFlags, 0, md3dDevice, NULL, NULL, &m_pEffect, &pErrorBuffer, NULL ) ) ) { char * pErrorStr = ( char* )pErrorBuffer->GetBufferPointer(); //If the creation of the Effect fails then a message box will be shown MessageBoxA( NULL, pErrorStr, "Error", MB_OK ); return false; } //Get the technique called Render from the effect, we need this for rendering later on m_pTechnique=m_pEffect->GetTechniqueByName("Render"); //Number of elements in the layout UINT numElements = TexturedLitVertex::layoutSize; //Get the Pass description, we need this to bind the vertex to the pipeline D3D10_PASS_DESC PassDesc; m_pTechnique->GetPassByIndex( 0 )->GetDesc( &PassDesc ); //Create Input layout to describe the incoming buffer to the input assembler if (FAILED(md3dDevice->CreateInputLayout( TexturedLitVertex::layout, numElements,PassDesc.pIAInputSignature, PassDesc.IAInputSignatureSize, &m_pVertexLayout ) ) ) { return false; } model loading: m_pTestRenderable=new CRenderable(); //m_pTestRenderable->create<TexturedVertex>(md3dDevice,8,6,vertices,indices); m_pModelLoader = new CModelLoader(); m_pTestRenderable = m_pModelLoader->loadModelFromFile( md3dDevice,"armoredrecon.fbx" ); m_pGameObjectTest = new CGameObject(); m_pGameObjectTest->setRenderable( m_pTestRenderable ); // Set primitive topology, how are we going to interpet the vertices in the vertex buffer md3dDevice->IASetPrimitiveTopology( D3D10_PRIMITIVE_TOPOLOGY_TRIANGLELIST ); if ( FAILED( D3DX10CreateShaderResourceViewFromFile( md3dDevice, TEXT( "armoredrecon_diff.png" ), NULL, NULL, &m_pTextureShaderResource, NULL ) ) ) { MessageBox( NULL, TEXT( "Can't load Texture" ), TEXT( "Error" ), MB_OK ); return false; } m_pDiffuseTextureVariable = m_pEffect->GetVariableByName( "diffuseTexture" )->AsShaderResource(); m_pDiffuseTextureVariable->SetResource( m_pTextureShaderResource ); Finally, the draw function code: //All drawing will occur between the clear and present m_pViewMatrixVariable->SetMatrix( ( float* )m_matView ); m_pWorldMatrixVariable->SetMatrix( ( float* )m_pGameObjectTest->getWorld() ); //Get the stride(size) of the a vertex, we need this to tell the pipeline the size of one vertex UINT stride = m_pTestRenderable->getStride(); //The offset from start of the buffer to where our vertices are located UINT offset = m_pTestRenderable->getOffset(); ID3D10Buffer * pVB=m_pTestRenderable->getVB(); //Bind the vertex buffer to input assembler stage - md3dDevice->IASetVertexBuffers( 0, 1, &pVB, &stride, &offset ); md3dDevice->IASetIndexBuffer( m_pTestRenderable->getIB(), DXGI_FORMAT_R32_UINT, 0 ); //Get the Description of the technique, we need this in order to loop through each pass in the technique D3D10_TECHNIQUE_DESC techDesc; m_pTechnique->GetDesc( &techDesc ); //Loop through the passes in the technique for( UINT p = 0; p < techDesc.Passes; ++p ) { //Get a pass at current index and apply it m_pTechnique->GetPassByIndex( p )->Apply( 0 ); //Draw call md3dDevice->DrawIndexed(m_pTestRenderable->getNumOfIndices(),0,0); //m_pD3D10Device->Draw(m_pTestRenderable->getNumOfVerts(),0); } Is there anything I've clearly done wrong or are missing? Spent 2 weeks trying to workout what on earth I've done wrong to no avail. Any insight a fresh pair eyes could give on this would be great.

  Read the article

< Previous Page | 554 555 556 557 558 559 560 561 562 563 564 565  | Next Page >