Search Results

Search found 25727 results on 1030 pages for 'solution'.

Page 559/1030 | < Previous Page | 555 556 557 558 559 560 561 562 563 564 565 566  | Next Page >

• Is there software that can visualize all sounds from the sound card?

  - by bentsai

  I'm looking for a solution to this problem: When I'm working at my computer, sometimes I'll be using noise-isolation headphones connected to a source other than my computer (e.g., an iPod). I would like to see (this is what I mean by "visualize") some kind of notification on my screen, since I will not be able to hear the sound. Is there any software out there that would accomplish this? I'm interested in seeing any sounds that would normally come out of th sound card. This is for Windows (XP), but I'd be interested in hearing solutions for other flavors, and OS X, as well.

  Read the article

• Dead USB flash drive

  - by Unsliced

  So a friend has come to me with a problem. They have a dead USB thumb drive which no longer responds when plugged into a machine. I've tried it in a Mac and it doesn't even respond, at least on a Windows XP machine it sees that it is there but can't show it in explorer, just that whatever is plugged in has malfunctioned. There is obviously current because the activity light on the drive illuminates. I'm looking for suggestions, please. I have access to Mac or Windows hardware and am happy to experiment (and even to pay if the solution works!) It's a bit late to recommend regular backups, but in the lack of that, what's the next best forensic advice? Edit: I should stress that, if possible, we're trying to rescue the data, after all, thumb drives are basically disposable and hardly worth the bother if there's no emotional or functional reason for wanting to rescue it!

  Read the article

• How to attach multiple ipv6 ips to eth1 on debian

  - by Noodles

  I've just got a new server with native ipv6. I want to attach multiple ipv6 ips to eth1, but the only way I can see to do so is to attach them individually: i.e. address 2607:f0d0:xxxx:xxxx::2 address 2607:f0d0:xxxx:xxxx::3 address 2607:f0d0:xxxx:xxxx::4 Is it possible to bind whole subnets of ipv6 to a single network interface on debian? My server host tells me I have 18,446,744,073,709,551,616 ipv6 addresses for that server, surely it gets to be a nightmare to manage if they all have to bound individually (plus ifconfig would look messy). Does anyone have a solution?

  Read the article

• Wireless does not work 12.10

  - by superkoop

  My primary issue is that my wireless does not work after I installed 12.10. The output to rfkill list all: 5: hci0: Bluetooth Soft blocked: no Hard blocked: no The output to lshw -class network is: *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@0000:09:00.0 logical name: eth0 version: 12 serial: 00:21:9b:d6:46:51 size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full ip=192.168.1.102 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:44 memory:fe8fc000-fe8fffff ioport:de00(size=256) *-network description: Network controller product: BCM4312 802.11b/g LP-PHY vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:0b:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=b43-pci-bridge latency=0 resources: irq:17 memory:fe7fc000-fe7fffff The output to lspci -nn for the pertinent information is: 0b:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01) Thus, it seems the solution would be to run: sudo apt-get install linux-headers-generic sudo apt-get install --reinstall bcmwl-kernel-source sudo modprobe wl However, I do not currently have access to an ethernet connection, as I am currently only able to use verizon wireless 3g internet. Thus, is there a way to set up ICS with a Vista machine so that I can access the internet by using the Vista machine as the host? Or, is it possible to fix this by downloading the important packages in vista and moving them to ubuntu via USB drive?

  Read the article

• Having trouble searching for a ‘.’ using htaccess.

  - by ThisLanham

  I'm setting up a website that (ideally) would allow users to access other users' homepages with a url in the format "www.mysite.com/ThisLanham" where 'ThisLanham' is the username. The username begins with a letter and can consists of any alphanumeric character along with an underscore, hyphen, or period. So far, the redirection has worked perfectly when I ignore usage of the period character. The following code handles that request: RewriteRule ^([a-zA-Z][0-9a-zA-Z-_]*)/?$ Page/?un=$1 [NC,L] However, I've tried a number of ways it check for the period as well, but all have resulted in a 500 Internal Server Error. Here are some my attempts: RewriteRule ^([a-zA-Z][0-9a-zA-Z-\_\\.]\*)/?$ Page/?un=$1 [NC,L] RewriteRule ^([0-9a-zA-Z-\_\\.]\*)/?$ Page/?un=$1 [NC,L] RewriteRule ^([a-zA-Z].\*)/?$ Page/?un=$1 [NC,L] RewriteRule ^(.\*)/?$ Page/?un=$1 [NC,L] also tried... RewriteCond $1 != index.php RewriteRule ^([a-z][0-9a-z-_.]*)/?$ Page/?un=$1 [NC,L] My backup plan is to no longer allow users to include periods in their usernames, but I'd much rather find a solution. Any ideas?

  Read the article

• wamp server does not start: Windows 7, 64Bit

  - by Ram

  I am trying to install wamp server (following is the exact setup name) on windows 7, 64Bit OS. But it never starts, icon stays in orange color meaning some services did not start. wampserver2.2e-php5.3.13-httpd2.2.22-mysql5.5.24-x64 I have been searching from last 3hours but did not find any solution. Port 80 is not in use. In windows services, when I try to start wampapache service manually, it throws following error: Windows could not start the wampapache service on Local Computer. Error 1053: The service did not respond ot the start or control request in a timely fashion. apache_error.log is empty. Things use to work fine in windows XP. May be this is a repeated thread, but I did go through similar posts. But nothing worked! Please help!!

  Read the article

• High Availability Clustering and Virtualization

  - by tmcallaghan

  I'm trying to understand how the various virtualization vendors (specifically Amazon EC2, but also VMware and Xen) enable software vendors to provide a real HA solution in the environment where the servers are virtualized. Specifically, if I'm running any HA application (exchange, databases, etc) I need to ensure that my redundant virtual "servers" aren't located on the same physical server. Using in-house virtualization solutions (VMware, Xen, etc) I can provision accordingly as well as check the virtual - physical arrangement. I could, however, accidentally "vmotion" to the same physical hardware. With EC2, I don't even have the ability at provision time to select different physical servers. Since their Cluster Compute Instances are 1 virtual server per physical server it seems to be the only way to guarantee I don't have a false sense of redundancy. Any ideas or thoughts would be helpful. What are others doing about this problem? If the vendors provided an API where I could get something as simple as a unique physical system identifier I could at least know if I'm going to have an issue. -Tim

  Read the article

• Is GPU active when there are not any monitors?

  - by Mixer

  Does GPU render anything when there is no monitor plugged in? Today I turned my old PC into some kind of a "server" which means that I want it running 24/7. I don't need any display (I will operate through ssh) so when everything was set up I removed my monitor. After a hour I checked my graphic card's cooling system and it was still hot. My graphic card is GeForce 8600 (with DVI connector), OS is Debian Linux. What is the best solution in this situation (standalone server) if GPU is active and I don't want it to waste power?

  Read the article

• Forwarding requests throught Apache to openVPN

  - by Ency

  I am wondering if it is possible to redirect requests through Apache to eg. OpenVPN. As long as I need to bypass firewall, I need to use port 80/443 for openVPN, but there is Apache server which has both port for itself. Client ---> Firewall (allows 80/443 only) --->| ---> Apache (80/443) ---> OpenVPN (1194) | -------------------------------------------- My Server I was thinking about mod_proxy, but I am not sure if it is good idea, have you got any ideas? I hope possible solution will be applicable on virtual host as well.

  Read the article

• How to copy the value from a cell to another (using a formula), but not formula from the source cell

  - by RODY ROY

  I'm making use of NOW() function at many places in my spreadsheet, which is basically a checklist document. So my requirement is that for each step, it should record the datetime at which that step was completed. But whenever the Now() is being used... all the previously updated cells withe datetime are also getting updated again. Hence at the end of the day, am not able to get the detailed time at which each of those steps are completed. This is how I've created as of now: Used a Checkbox for each step. Once the step is complete, on clicking the Checkbox, it will update the cell A1 as "Completed". In the cell B1, I've put the following function which will check for the value in A1. If it is "Completed", then it will update the value of B1 with the current datetime using Now() =IF(A1="Completed";NOW();"") Please let me know a solution for this. Also if there any other alternative.

  Read the article

• Crackling sound from right laptop speaker

  - by user1880405

  This problem lasts for several months already (first on Ubuntu 13.10, not on 12.04. I get very loud cracking/popping sound from my right Asus K56C's speaker, I searched everything but could not get rid of it. Several facts: There is no problem on Windows 8. It has nothing to do with applications running because it appears even before login screen of Ubuntu. Also same problem if I boot from Live USB. Muting sound will remove noise, but lowering volume has no effect. Inserting any headphones, removes the noise. If I disconnect power cable while there is noise, noise will always disappear, but only if there is no music playing. If I start playing music, noise again appear even with power cable disconnected. Sometimes that noise disappears for 1-4 weeks, and then again appears for no reason and lasts from several days to weeks. That noise is always the same, and I tried adding tsched=0 to /etc/pulse/default.pa. Also tried this PositionReporting fix, with no effect. I also tried disconnecting all the cables and removing all electronic devices around laptop, but it has no effect. I also tried removing Pulse Audio, didn't change anything. Would be great if someone has some real solution for this problem.

  Read the article

• CentOS box access by name

  - by out_sider

  I intent to develop a centos server with lamp. What I want is connect the server to any kind of home network and access it by http://myserver. I have already successfully set a static ip but I can't seem to ping it by name. If you had to develop a solution with the intent to plug in the box by Ethernet to a router and access it with a browser using the server name what would you do? That's basically what I'd like to know. Thanks in advance

  Read the article

• How to forward traffic using iptables rules?

  - by ProbablePattern

  I am new to iptables and I have been doing Google searches for a few days now without finding a good solution to this problem. I have computer A with a public ip address (say 192.0.2.1) that can access the Internet unrestricted. I have another computer B with a private ip address (192.168.1.1) that can only access computer A. How do I use iptables to forward network traffic from B through A to the Internet? I need to use http, ftp, and https in order to use apt-get with sudo. Both computers run Ubuntu linux. I have tried using Squid but I think it is far too complicated for what I need to do.

  Read the article

• How do I block requests to Apache on a network interface?

  - by Dmitry Dulepov

  The problem: I have a local Apache instance on my Macbook Pro. I need it to listen on all network interfaces except en0 and en1 (basically, listen on lo and vnicX from Parallels). I know about "Listen *:80" but this is not a solution in this particular case. The only thing I could imagine if to use OS X firewall to block incoming requests to Apache on those interfaces. But I could not find any working examples and could not make such rules myself. Could somebody help, please?

  Read the article

• Resize windows command line prompt?

  - by Yuval

  I'm working on a Windows xp machine. I wrote a program in assembly that outputs some text, and am trying to create a screenshot of the command line output (start-run-"cmd"). The problem is that the text initially printed by the program gets pushed up by later text and I cannot scroll to it. I tried playing around with the width and height under properties = layout but it seems to resize the window itself (the borders) without resizing the textarea inside the window (text does not have more "room", but the window is bigger). Does anybody know a workaround/solution for this? Thank you!

  Read the article

• Windows log file monitor that supports custom events (eg. sending an email when it detects the string "ERROR")

  - by ilitirit

  I know this question has been asked several times before but I can't seem to find a solution for my requirements. I currently use BareTail, which works wonderfully except that it doesn't support custom events besides line highlighting. I'm also trying TailForWin32. It has a SMTP plugin but it seems to be in beta status, and the highlighting seems limited. It also doesn't handle rolling log files very well (a blocking dialog box pops up, whereas BareTail just rolls over naturally). All I really need is something like BareTail that supports custom events. First prize would be a tool with a plugin-based architecture so I can use my own messaging plugins, but anything that supports SMTP mail would be fine as well.

  Read the article

• error: no such partition. Grub rescue

  - by user1440731

  I deleted Linux (Ubuntu) partition from windows Ii forgot to repair mbr. The thing is I don't have my windows boot CD with me now and not CD drive. so the solution I needed is that is there any small utility software that can be easily downloaded (I knew about hiren CD but that's about 500 MB and I don't need that whole stuff) and can work through USB? Also explain steps to perform. Thank you UPDATED: Any small Linux live CD can also b taken into consideration as i can boot that on USB using pendrivelinux software

  Read the article

• Windows VPS/Cloud Host Recommendations?

  - by user18937

  As Hosting.com are no longer offerring Windows VPS accounts, we are looking for a new US based provider. Looking for something that offers standard Windows IIS hosting for a Dotnetnuke portal site with SQL Server Express or Web. Basic managed services for OS updates as well as regular backups required. Good level of support and solid uptime is critical. Budget in the $150-$200 month range but flexible depeding on quality and services offerred. Anyone have any suggestions and good feedback they can share? Currently looking at Jodohost as an option but would like some other possibilities as their support can be suspect at times we have found. A cloud solution in same range would also be an option.

  Read the article

• Can I share data between two users in an ASP.NET Application?

  - by Dave

  I have an issue with Roles.IsUserInRole function. It take hell amount of time to just check if the logged-in user is in particular role(typ 3-9 sec). I searched to find a solution and arrived on this but I am not sure If I have fully grasped it. What I got from the above, A new derived class is created. Inside that class, there is a list which retrieves all user at once. The next time you check IsUserInRole, you do not use the actual IsUserInRole method but rather use the one you overrode in your class. Is this the correct description? Am I on track? My question is, can data be share between two different users in ASP.NET application? If yes, will the shared data exist only if there is at least one user logged in. If all users logs out, that shared data is destroyed? My point is this data will be created only one time whenever a user logs in. For all subsequent users they can use this data and check their roles against the list? I need a detailed answer. My application has users and different roles. We are using ASP.NET roles.

  Read the article

• How can I disable write protection in my USB flash drive?

  - by 97847658

  My USB flash drive is currently unusable because it somehow (quite suddenly!) became write protected. I have googled around and tried many solutions to this problem, but none of them have worked so far. Here are some of the solutions I've tried: The drive has no tangible switch or button. Formatting the drive won't work, even in command line, even "low level formatting", because the drive is (after all) write protected. Changing certain registry keys to 0 doesn't seem to work. Repair_Neo2.9.exe says "USB Flash Disk not found!" One factor that may make it more difficult to find a solution: I have no idea what the make or model is, because I received the USB flash drive from my university as a gift. So if anyone knows how to find the make and model, that alone might be helpful. Any ideas? Thanks.

  Read the article

• CI - How long is continous?

  - by Andy

  We currently are using CCNet as our continous integration server. Most projects check for changes every 30 seconds (the default) and if needed perform a build (unit tests, stylecop, fxcop, etc). We've gotten quite a few projects now, and the server spends most of its time near 100% cpu utilization. This has alarmed some of the development team, even though the server is responsive and builds are still about the same length of time they've always been. Its been suggested that we lower the check interval to about five minutes. To me that seems too long, and we risk people committing code and then going home for the weekend and now there's a broken build possibly holding up others. In response, the suggestion is that if someone needs to know the results they can force the build. But that seems to defeat the purpose of CI, as I thought it was supposed to be automated. My proposed solution is just to get another build server and split the builds amongst the servers. Am I thinking about this the wrong way, or is there a point where if integration isn't often enough you're not really doing CI anymore?

  Read the article

• options for physical architecture of rails site regarding caching server or cdn

  - by timpone

  I have a rails app that is set on a single server currently. On production, I force_ssl for everything. I am interested in using a caching server for images (I'm fine with css and js being served from origin for time being). Would nginx or varnish (which I have no experience with) be a better solution (for October 2012)? I'd imagine that it would be easy to switch these around while still on this single server architecture. Or would something like cloudfront (which I also have no experience with) make sense for hosting image files? I know this is a vague question but appreciate any current feedback. thx in advance

  Read the article

• How can I speed up my macro in Excel 2003?

  - by user144872

  I have a macro that copies data from one cell to another and uses a VLOOKUP formula, among other things. My spreadsheet contains nearly 2000 rows. When I run it in Excel 2003, Excel starts to slow down as the macro processes rows 500 and above. It gets even worse when it reaches the 1000th row. It takes more than 5 hours to complete. In Excel 2007, however, the macro runs for only half an hour. Can anyone help me find a good solution?

  Read the article

• Windows 8.1 triple monitors - can't enable all 3 at the same time

  - by Jeckerson

  Today decided to update from Win8 Pro to Win8.1. Everything was fine with enabled 3 monitors (Extended mode, not Eyefinity) at the same time. But after update can't enable 3d monitor, only 2 could be enabled at the same time. Did current things before write question here: Remove all drivers, reboots, re-installs Different cable input's and orders of enabling Tried to enable each monitor from Catalyst and Windows Screen Resolution Spec's: Windows 8.1 Pro XFX HD7970 3 of LG E2442 Cables: 2 DVI 1 HDMI Googled for many time and found one of possible solution is to buy ACTIVE mini DisplayPort to DVI/HDMI, but maybe there are some another more simple solutions?

  Read the article

• How do I get my Intel HD graphics to work alongside my HD7850, as my second(HDMI out) monitor?

  - by AlexTes

  Title says it all. Further info: Motherboard: http://www.asrock.com/mb/Intel/Z77%20Pro3/ Processor: http://ark.intel.com/products/65520/Intel-Core-i5-3570K-Processor-%286M-Cache-up-to-3_80-GHz%29 So currently my main screen is running on my HD7850. Got drivers from the amd website. I have looked through dozens of questions here. I'm about to try booting Ubuntu from a stick and seeing if the xorg-edgers drivers might help. When booting, all action goes down on the very screen I'm trying to get to work.*EDIT never mind this. Seems to be special boot magic. As the screen only displays whiteline errors once the gui of ubuntu has kicked in and everything graphic is happening through my graphics card again. Connected through HDMI(motherboard)-DVI. So unless having multiple displays is a huge deal the solution hopefully isn't that complicated. I just feel I'm missing something simple. If this really is complicated, I should probably just hook up the display to my graphics card. My CPU is usually the one chilling out though so I'd like to try to get that to work. Also just because I don't want to buy an extra cable and this set up makes me feel warm and fuzzy inside. Tell me what to try or look up, I'll be most appreciative. Thank you! **UPDATE The x-swat ppa installed some intel stuff. Booting with one monitor plugged into the motherboard gives nothing. Doing it with the pc already on gives the purple "Ubuntu" with 5 dots boot/shutdown screen.

  Read the article

< Previous Page | 555 556 557 558 559 560 561 562 563 564 565 566  | Next Page >