Search Results

Search found 14148 results on 566 pages for '2008'.

Page 56/566 | < Previous Page | 52 53 54 55 56 57 58 59 60 61 62 63  | Next Page >

• How to resolve 'No internet connectivity issues' with a Virtualised 2008 R2 Server using Forefront UAG

  - by user684589

  I have spent some considerable time reading up on as many possible blogs and articles as I can to help me solve why my VM (Running on Hyper-V) for DirectAccess has suddenly stopped being able to access the internet. The VM setup shares the same internet connection on which I have written and submitted this question so I know that the actual underlying internet connection is fully functional. Previous to last week the DirectAccess was fully functional and had no issues. This is a recent problem which was led up to by a number of consistent crashes on the DA machine when access was attempted. Upon reboot all seemed well until recently. I am not certain whether it is relevant, but previously to this I had a number of power issues where the entire VM host shutdown unexpectedly leaving around 8 VM's in a bad way. Upon restart, the UAG DirectAccess machine was unable to access its configuration service (although the service was started) but this seemed to relate to the Light-Weight Active Directory Service AD LDS which had a corrupted database. Having repaired this database, I restarted the service and could subsequently reconnect to the configuration service again. For good measure I re-bound the network adapters (virtualised through Hyper-V) and DirectAccess claimed to be all happy again. However as it stands my machine is still unable to access the internet showing the "No internet connectivity" exclamation mark for the external facing NIC. I have also tried removing the adapters, disabling, re-enabling and the problem persists. The intranet part of the VM CorpNet seems to be fully functional as before and I'm running out of ideas. Any input would be greatly appreciated. I am not an advanced Domain Administrator so please be gentle.

  Read the article

• Disk Cleanup on Server 2008 R2 is ineffective

  - by cparker4486

  I have a user profile with ~2.9GB of Error Reports backed up in the ReportQueue folder (C:\Users\UserName\AppData\Local\Microsoft\Windows\WER\ReportQueue). Running DiskCleanup as the administrator does not detect these files and therefore does not clean them up. However, running the utility as the user shows an even larger amount (12.4GB!) of error reporting files. As seen below: The problem is that after running the cleanup utility the disk spaced used does not decrease by anywhere near 12.4GB and running the utility again detects the same 12.4GB of files. What is the problem here? Alternatively, can I manually delete the files in the ReportQueue folder?

  Read the article

• Server 2008 SMTP service error

  - by Daolsky

  When i right click on SMTP (in IIS 6.0) and click start i get the following error "The service has returned a service-specific error code. Check the windows event viewer for details" When i look at the event viewer i get this message... "The service could not bind instance 1. The data is the error code."

  Read the article

• Default document not working after installing SP1 on Windows 2008 R2 x64

  - by boredgeek

  We have a web site that should only be available for authorized users. So we deny anonymous access for the site. However we do allow anonymous access to the default page and the login page. When we installed SP1 the behavior of the server changed. Now if the user is trying to access the root of the site, say http://mysite.com, she is redirected to login page rather than the default page. Is there a hotfix to bring back the previous behavior?

  Read the article

• SQL Server 2008 Snapshot Replication Trigger Start

  - by Chris

  I have setup a production server and a staging server. Whenever we are at the point in our release cycle where we want to begin testing on staging I want to copy the production DB over to our staging server. I have setup snapshot replication to do this and have setup the staging server to have a pull subscription to the production DB. I want my continuous integration server to be able to kick off this process. How do I programmatically trigger a snapshot to be created and replicated? If there is a way to trigger this process is there a way to know when it's finished?

  Read the article

• User Group Policy in Server 2008 to set Default Profile settings

  - by Chris

  I have computers to deploy and want to apply changes to the default user policy on these PCs automatically. What's the best way to do this? Our current procedure is: Create the computer account in an OU called "Deployment" on our server Unbox the PC Login as the user who will be receiving the PC Change settings (pre-configure outlook, authorize Office, etc.) move computer account to correct OU Place the PC on the users desk. I would like to make as many of the changes in step #4 with Group Policies applied to the Deployment OU if possible since they're largely repeated for every computer. There are a dozen policies created and the computer ones apply correctly but the user policies do not. I understand this is because the end user is not in our "Deployment" OU. I don't want to apply these settings to the user at their current station just the new PC I'm working on. I believe I have the desired effect with Group Policy Loopback Replace enabled on policies that need user policies changed but this just feels wrong/inefficient/complicated to maintain. Am I doing this correctly? Is Group Policy Loopback the only way to change user accounts on one computer? What do you do to setup a user on a new PC?

  Read the article

• Server 2008 R2 file access permissions

  - by Napster100

  I'm finding it awkward to sort out permissions for file sharing and access on my LAN. I've created an account on the server node (as a normal user) and shared a drive that has 2 folders at the root, one is for personal file storage and the other shared files, if I connect to the shared area from a workstation running windows 7 and log-in using the account I created on the server, I can look through directories but can't look in some (which I wanted as I changed the permissions for that to happen), but my problem is although the permissions are set for this user account to have full control of the specific folder I can't create a folder in that area or upload files to that folder. Could someone explain why this is? Thanks in advanced

  Read the article

• Reverse NAT Setup for Hyper-V on Win 2008 R2

  - by sukru

  I'm trying to setup a Linux server behind a Windows Hyper-V host that will help supply some of the services (SSH, HTTPS, etc). However getting RRAS configured for reverse NAT (port forwarding) turned out to be a non trivial task. As a staring point, I tried forwarding port 22 (SSH) to the virtual machine. The virtual machine is on a public interface (i.e.: it also has a visible IP on the same network as the host). On RRAS management console I tried to add a rule, by adding "Local Area Connection" to NAT pool (Public Interface - Enable Nat), and an incoming rule for port 22 - :22. I also tried with the same port enabled on Windows Firewall (and not). The NAT management page tells there are "1 mappings" and "30+ Outbound packets transleted". However all other counters (Inbound packets translated, and respective rejected ones) are always zero. (I'm trying to access the server from an external machine). I can directly access the service if I give the VM's public IP, but not the host's one. Is there a way to enable this on RRAS?

  Read the article

• CPU Configuration Issue for 2 Servers (Server 2008 R2)

  - by Bill Moreland

  I have 2 servers running the exact same Classic ASP code with Access DBs (yes, not ideal, but it is what it is, for now). 1) Xeon 5520 @ 2.27 GHz (6 GB Memory) 2) Xeon E5-2620 @ 2.00 GHz (2 processors, 32 GB Memory) For most pages the newer E5-2620 processes the pages between 10-15% faster. On pages requiring heavy and/or multiple complicated access stored procedures (queries) the older 5520 does a much better job. I believe the servers are configured nearly identically. My question: is it possible that the newer, multi-processor server is not as good at handling Classic ASP as the older single processor? Is there a configuration difference that needs to be in place that I'm missing since I'm shooting for identical implementations?

  Read the article

• Disable RDC Welcome Screen in Windows 2008 R2

  - by mikebridge

  Is there a way to disable or bypass the "Welcome" screen I see when I'm using RDC to log in to a machine using saved credentials? I have startup task which launches an RDP session automatically to localhost when the machine boots. This works, except that the remote desktop window stops and waits for an "OK" on the Welcome screen: MACHINENAME-A.B.C.D(Server ID:Console 0) Welcome [OK] This screen is preventing me from automating this login. Is there any way to get around it? EDIT: Here's the command line I'm currently using to launch it: start /min C:\windows\system32\mstsc.exe c:\rdp\ServiceRunner.rdp

  Read the article

• Windows 2008 Best Raid Configuration

  - by Brandon Wilson

  I have 4 2TB hard drives and I was thinking about using Raid 10. This would give me 4TB correct? My next question is would it be easy to add more hard drives to the raid array. For example if I bought another hard drive can I add it to the array without backing up any data? Basically I want to be able to start off with 4TB and when the space becomes full add more space as needed. If this isn't possible with Raid 10, is it possible with any Raid configuration. Any suggestions would be appreciated. Thank you.

  Read the article

• Windows 2008 Server network issues

  - by Snowflow

  I have this one server that just doesn't want to be on the internet It's a new server, a twinblade, the other twin works, but not this one. It can connect fine to everythign else in the LAN, but cannot go out on the net It can be reached by ICMP requests over the net (the nagios server can probe it, but not ping it for instance), but not TCP Everything seems fine both in firewall and machine, i get no issues. Anyone care to help me out where i can start looking, i'm seriously confused. edit: it can ping gateway and through the sonicwall site to site VPN, it\s also able to resolve DNS. the only thing it can`t do is reach anything outside of LAN/VPN

  Read the article

• SMTP Server setting on Windows 2008 R2

  - by user223298

  I am very very new to this and just trying to configure SMTP virtual server. I have followed a few threads to get it all running, but the mails are not being delivered. What I have done so far - 1) Install SMTP server. 2) SMTP server Properties General Tab - IP address is set to 'All Unassigned'. Access Tab - Authentication is anonymous access. Everything else is left to Default settings. Delivery Tab - Outbound security is anonymous access. In Advance section, entered the domain name in the FQDN field, and localhost in Smart host field. 3) Created an Inbound Rule for SMTP service to allow connections to Port 25. When I try to telnet, everything works up until the point the mail has to be send. Now, the sender's domain is different to the receiver's domain. Not sure if settings have to be changed to allow that? I had set the Relay restrictions on SMTP server, but because I couldn't send the mails, I thought I might as well make it work without the relay first. The error I see while sending the mail is 451 Timeout waiting for client input. I used to get some other error before when I had Relay restrictions on. Can anyone please point me in the right direction? Please let me know if you need more information. Thanks.

  Read the article

• Monitoring Active Directory (AD) Replication in Windows Server 2008 R2

  - by Kyle Brandt

  With Active Directory, what is a good way to monitor replication? I have multiple sites and multiple locations, so ideally both replication between sites and within sites would be monitored. I'm not really sure if each DC needs to be monitored, each NTDS connection, or each DC * Each NTDS connection. For the purposes of fitting into a standard alerting methodology, perfmon counters that would allow me to alert if replication was behind X minutes seems like it might be ideal.

  Read the article

• How to provide users with isolated drive letters in Windows 2008 R2 (Terminal Server) [migrated]

  - by Pierre

  I need to be able to host several RDP sessions on a Terminal Server, where users of group A see a drive X: mapped to a given folder of the server and another group B see the same drive letter X: mapped to another folder. For instance : User 1, Group A X: --> C:\data\A User 2, Group A X: --> C:\data\A User 3, Group B X: --> C:\data\B User 4, Group C X: --> C:\data\C Is this possible. If so, how do I configure the virtual drive mapping so that the user has nothing special to do; i.e. I want the letter X: to be available to Remote Apps launched by the user, or if the user logs in to the remote desktop. Can I somehow use subst to get this to work? I would like to avoid, if possible, mounting drive letters on local shares (i.e. I don't like the idea of having to go through \\localhost\data-A to reach the user's data).

  Read the article

• DNSCache excesive memory usage Windows Server 2008 R2

  - by MikeT

  We are having an issue with the dnscache service where its memory usage is becoming excessive (~6GB) after a week or two. Restarting the service frees this memory but performing ipconfig /flushdns does not, an ipconfig /displaydns shows aprox 15-20 entries in the cache. We have checked and there appears to be aprox 150 DNS queries per second taking place but I would not expect this to have the effect of causing this memory issue. I have tried to search MSDN for hotfixes or bug reports but I could only find a reference to a memory leak in windows 2003. can anyone suggest how to proceed.

  Read the article

• slow windows 2008 server

  - by andytimmons

  my friend's company has a win2008 server, not R2, and it's really slow, it has 8G ram, has a SAP business one running on it, and it's also an AD, DHCP, DNS server, has Kaspersky 6 AV running as well. CPU usage is constantly 100%, physical memory is around 70%-90% even close everything, disable AV, if check processes, taskmgr.exe and windows explorer use like 40% each sometimes, do you have any suggestion what could be

  Read the article

• Native Symlink Windows 2008 r2 with cygwin

  - by mickdelaney

  Is it possible for me to create an ssh session on windows which then does some folder/file manipulation and then creates a NATIVE windows symlink. i.e. a symlink that will be recognised by IIS and other app/services. i've tried to create a symlink to a folder but all i get is a 1kb system file (with the same name) where the symlinked folder should be. using ln -s SOURCE TARGET i end up with target (system file, 1kb). BUT in cygwin i can see the symlinked folder as normal. Spent too much time on this :-)

  Read the article

• Windows update not working (2008 R2)

  - by Le_Quack

  long story short, one of our domain controllers is won't update. when an update is attempted it says the service is not running (checked and restarted yes it is) and event viewer says its error 0x80072ee2 but this apparently means there is a connection issue but as far as I can work out there isn't. this isn't a short term issue either seems to have been going on since at least feburary. any ideas? Note: Server updates fall to another (more senior) member of the team please do not ask me why they have been so neglected. He doesn't know what the issue is so I'm just trying to get to the bottom of this. many thanks

  Read the article

• Windows Server 2008 (x64): Wont boot past bios page

  - by WebSolProv

  Happy New Year, Since a month or so ago I inherited responsibility for small network administration for my sins. The domain controller (yes there is only one, and yes I know it is best practice to have two even in a small domain setup) went down overnight and I have been trying all day to get it back up and running. Unfortunately this machine also administers our entire ActiveDirectory setup: 1) It goes thru the BIOS without any errors, nothing whatsoever 2) It gets into the “select safe mode, safe mode with networking, normal” etc and if you select either of the safe mode options it loads a few files then reboots. If you select normal it just runs for a bit (doesn’t get to the windows splash screen) and then reboots again. 3) If you select windows repair, it asks for an image to repair too: however it would appear that none was taken that can be used (!!) or one is not being shown. 4) I have tried repairing the boot sector and the boot configuration using Bootrec.exe, both which it says were completed successfully but still it doesn’t work. 5) I have tried swapping the drives into another server to rule out hardware and that didn’t work either so clearly it’s the OS. 6) I have tried running chkdsk which ran fine, and also memory check which was also fine. We do have another machine on the network that was installed as a DC so when we decommission the current infrastructure but when I try and "promote" this to the lead DC then I get “you cannot modify domain or trust information because a PDC emulator cannot be contacted" so I am unable to replicare the ActiveDirectory details. If anyone can think of any direction I should follow it would be greatly appreciated, Thanks, Alex

  Read the article

• Scaling web application with SQL Server 2008 database

  - by John

  I have a database which has 90% of read only tables. 10% of the tables has writable data. We need to scale the ASP.NET application.We need to add more users who will not be writing to the database. We are thinking of adding another server and routing the users who need read only access to that server. Is there a way to replicate just some tables to another database server. Since the 90% of data doesnt change, we don't want to setup any full database replication. Please advise.

  Read the article

• Downgrade from visual studio 2010 to visual studio 2008

  - by lajoo

  I wrote a visual c# 2008 windows form application ,then i edited the code in a computer which had visual studio 2010,but i can no longer run it in visual 2008,is there a way i can do this?

  Read the article

• printing from crystal reports activex printcontrol gives needless error

  - by DaVinciCoder

  I've got an asp.net application running on a windows 2008 64 bit server that gives an error after printing a crystal report. The server has CR 2008 runtime sp2 installed and views fine. When printing from the print button of the CR viewer the print dialog appears and prints correctly but throws the following error message after printing. "An error occurred on the server. Printing will be stopped. Would you like to view the error information" there is a yes or no option that points to an empty html file called PrintControlError.html. Other then this issue I've got no other troubles.

  Read the article

• "Insufficient System Memory" Error in SQL Server 2008

  - by Joseph

  I get the following error in SQL Server 2008: There is insufficient system memory in resource pool 'internal' to run this query. I recently migrated from SQL Server 2000 to SQL Server 2008, and the system is Windows Server 2K8.

  Read the article

• Converting VS 2008 template to VS 2010 template

  - by Rune FS

  I've got a project template that works for Visual studio 2008 but when I try to use it for visual studio 2010 I get "...The imported project "C:\program files (x86)\Microsoft\VisualStudio\v9.0\VSSDK\Microsoft.VsSDK.targets" was not found. The only thing I get from that is that it's looking for something in the 2008 SDK (which I have not installed but I would like to port the template to work with the VS 2010 SDK) ANy ideas on what I need to do to get the template working with the 2010 version?

  Read the article

< Previous Page | 52 53 54 55 56 57 58 59 60 61 62 63  | Next Page >