Search Results

Search found 17130 results on 686 pages for 'computer lab'.

Page 56/686 | < Previous Page | 52 53 54 55 56 57 58 59 60 61 62 63  | Next Page >

  • Browsing \\computer\share fails, but net use \\computer\share works?

    - by JMD
    I've had mixed results with using Windows Explorer to browse remote file shares. The setup: I'm at work on Windows XP SP3 Files are at home on Windows XP SP3 Two separate VPNs are available to access my PC at home corporate OpenVPN (10.1.2.3) a Hamachi/LogMeIn connection (5.1.2.3) With respect to my problem, it doesn't matter which IP I use. They both perform exactly the same way: I expect that if I open Windows Explorer and type in \\10.1.2.3\Shared I should be interrupted with a challenge for credentials, and then be able to interact with the files in the share. However, I just get that annoying dialog, "Windows cannot find '\10.1.2.3\Shared' Check the spelling and try again, or try searching for the item ..." However, I can take that exact same computername/sharename and with net use I can: net use * \\10.1.2.3\Shared * /user:homecomputername\username with this result: Type the password for \\5.69.83.158\C$: Drive Z: is now connected to \\5.69.83.158\C$. The command completed successfully. I can then access the files in Z: in Windows Explorer which was my original intent. Even after Z: is already mapped and the credentials are cached I still cannot bring up \\10.1.2.3\Shared in Windows Explorer. Why does the latter work, but not the former? Edit: Other services work fine, such as RDP. (I have a problem in which I can't SSH home, but I'll consider that separately.)

    Read the article

  • Shortcut to "printer and faxes" on another computer

    - by Doltknuckle
    I have a print server running windows server 2008 that has about 50 printers on it. In windows XP, I was able to connect to the server using the UNC name and make a shortcut to the "printers and faxes" folder. (For the record, I know that it really isn't a folder, but that's outside the scope of this question.) I have recently switched to windows 7 and I find that the jump lists are really useful. One of the things I want to do is make it easy to connect to that server's "printers and faxes" folder. I would like to use something like a shortcut that I can open and go immediately to that location. The problem is that windows 7 doesn't have a way to create a shortcut like you could in WinXP. They have a button on the toolbar that says "view remote printers" which sends you to the correct folder. I'd like to avoid having to type out the server name. I also can't use the "view network" link in windows explorer. Our organization has over 6,000 machines and viewing the network lists all of them. This is all about saving time by using the minimum number of mouse clicks and key presses in normal operation. Does anyone have any suggestions?

    Read the article

  • attach two hdds to a computer having 500W smps

    - by Gaurav Sharma
    I have a desktop system installed with a 250 GB hdd (seagate sata II) this system is having a power supply of 500W (not sure if it is 650W but not more than that) the power supply is a local brand. Will it be safe to attach a second 250 GB sata II hdd on the same system. Safe in the sense that the system may not fall short of power at any time. My system's config is as follows Core2Duo processor Mercury cabinet having an additional fan (small one) sata dvd writer 52X windows xp sp 2 ASUS motherboard (intel G965 express chipset) If the above specified power supply is not sufficient for above configuration of system then please suggest the appropriate power supply (including watts)

    Read the article

  • See network computer description in Explorer

    - by John Gardeniers
    When viewing the list of network computers in Windows Explorer on a Win 7 machine there appears to be no way of readily seeing the description field, which makes that pretty well useless. I believe this problem started with Vista but I'm seeing it for the first time because I was fortunate enough to skip over Vista. We're currently rolling out Win 7 on new boxes and although I'm changing the naming system to something more sensible, the old boxes have names such as FWS01, FWS02, etc. Managing a network of computers with such names is made more difficult when you can't readily see who's machine each one is. Googling the problem brought up a workaround involving creating a shortcut on an XP machine and copying that to the Win 7 box but that's a long way from ideal. Is there some kind of hack that can be applied to machines, the operator of which needs to be able to see the description field?

    Read the article

  • Accessing shared resource on local computer from users of different physical location

    - by Joe
    Sounds like easy task to some but such a difficult task for me to do... The main requirement for this task is to setup something in offices located on different locations, so (1st question) users are able to log on to the domain without VPN when they are in one of the offices. Additionally, (2nd question)how they can log on to the domain server when they are on the road like in a starbuck, what do they have to do to connect to domain after VPN connection are successful. also it's my understanding that, we can't share resource from computers on different network segments, (3rd question)what is the best solution to bridge/combine two network segments(two office in different locations) so computers of different location can see each other. Thank you in advance for any response.

    Read the article

  • After upgrade to Lucid, computer doesn't respond to clicks or pressed keys until X restart

    - by Victor Stanciu
    I upgraded to Lucid today, and after the update the display is "frozen". I can move the cursor, but I cannot click on anything, nor does it respond to any keys. The only way to fix it is to SSH into the machine (which, by the way, works just fine), and kill and start X. Then I'm taken back to the login screen and everything works. This happens every time I boot. Let me know if there are more details that I can provide.

    Read the article

  • Using Powershell's Invoke-command to install .exe on remote computer

    - by Bernie
    I have an .exe I would like to install on a large farm of Windows Server 2008 computers. I am attempting to use Powershell remoting. I have this command which works locally: invoke-command {& "N:\Temp\fortify_installer\HP-Fortify-3.20-Analyzers_and_Apps-Windows-x86.exe /s /f1N:\Temp\fortify_installer\response.iss"} But when I add the -computername flag it seems to go off to nowhere, and the installer is never run on the remote machine. I can launch notepad.exe via the same command and it runs. Does it have something to do with it being an installer, or something else? I realize many versions of this question have been asked and I have read them, but I am still confused as to why this doesn't work.

    Read the article

  • Computer turns off and on after start ..then goes dead

    - by Shiki
    I built a new PC from the following components: - CPU: Intel Core i7 950 - MB: Gigabyte X58A-UD3R - RAM: 2x2gb i7 Corsair memory - VGA: Zotac AMP2 GTX260 - HDD: 1 GreenSATA HDD (Western Digital 500gb RE2) When I turn it on, it goes for a few seconds, fans at maximum speed, then turns off. The again, it starts by itself.. and goes with fans on max speed, nothing happens. First I suspected my PSU. It's a Chieftec 450AA PSU. After I borrowed a Chieftec 550AA PSU, I tried to start with that. Exact same story. Any idea ? Do I need a bigger PSU? Reason why its not localized. I never seen this turn on, off, on. If you give answer for that, it would already help people like me, with the same problem.

    Read the article

  • Remote Desktop from Linux to Computer that Requires Network Level Authentication

    - by Kyle Brandt
    Is there a way to use rdesktop or another Linux client to connect to a server that requires Network Level Authentication? From Windows Server 2008 R2 -- Control Panel -- System And Security -- System -- Allow Remote Access there is an option that says "Allow connections only from computers running Remote Desktop with Network Level Authentication". So with this enabled I can con not connect from Linux. I can connect from XP but you need SP3 and I had to edit a couple of things in the registry for it to work.

    Read the article

  • Setting up a download limit for a computer

    - by sprsr
    Hello all, A friend of me asked me a question like that,"I have a modem, and a house mate. He is using my modem, and slowing down my internet. What I want to do is, limit his bandwith without using any program like netlimiter or so. How can I do that?" What are the ways to do this ? Thanks.

    Read the article

  • SharePoint Returning a 401.1 for a Specific User/Computer

    - by Joe Gennari
    We have a SharePoint Services 3.0 site set up supporting about 300 users right now. This report is isolated and has never been duplicated. We have one AD user who cannot log into the SharePoint site with his account from his machine and is subsequently returned a 401.1 error. If any other user tries to log on with their account from his machine, it works okay. If he moves to another machine and logs on, it works okay. The only solution to this point has been to install FireFox on the machine. When he authenticates with FF, everything is okay. Remedies tried so far: Cleared cookies/cache Turned off/on Integrated Windows Authentication in IE Downgraded IE 8 to IE 6 Removed site from Intranet Sites zone Renamed the machine Disjoined/Rejoined Domain

    Read the article

  • Pentium 4 Computer Won't Power Up

    - by Harvey
    I have a faulty Pentium 4 workstation with data that I would like to retrieve. Here are the symptoms & what I've done so far: Machine is totally dead. Motherboard LED is lit but that is the only sign of life. I have replaced the power supply and bypassed the on/off switch. Tried a PC Analyzer motherboard tester but didn't have any power to the card. Unpluggged the P4 cable from the motherboard, hit the on/off switch, the power supply fan comes on and I get codes from the analyzer but nothing that seems to be of any value. Machine does not boot. Will not shut down by hitting the switch. Bad motherboard or could it be a bad CPU cooling fan?

    Read the article

  • SQL Server maintenance tasks cannot run after changing computer name

    - by Gatura
    I am having a problem performing maintenance tasks on Microsoft SQL Server 2008 after changing my server name from the original random name given during installation to the one I prefer This is the error am getting Could not obtain Information about Windows NT group/users 'WIN-4N4A9TLBGJJ\Administrator', error code 0x534 Is there a way I can fix this problem without having to delete the account and recreating it again?

    Read the article

  • MacBook Pro (2007 - ATI-Card) Screen goes half black then shuts down the entire computer

    - by BluePerry
    Hey, when I'm starting my MBP I get about 10-60 seconds of the booting process before the screen goes half black (Its like applying a black to transparent gradient from the left side of the screen to the middle of the screen). After a 5 seconds the entire screen blacks out and the MBP shuts down. There have been issues with heat and some minor artifacts on the screen in the past but nothing serious as far as I know. Everything could be resolved by rebooting or letting the MBP cool down a bit. I would like to identify the problem now. There are 3 possibilities I can think of right now: My graphics card is defect and shuts down after a few seconds. (But if thats true, I find it kind of hard to explain the HALF black screen) My LCD-Panel is defect and sends back wrong signals so the system shuts down??? (I not sure about that) My fan or/and thermal sensors are defect and forcing the graphics card to shut down. Can anyone point if I'm right or if there yet another reason for this. I'd be thankful for any hint or tips. Cheers, Per

    Read the article

  • Computer class or home teaching for kids?

    - by JMarsch
    I want to teach my son to be a strong PC user. I could try to strike out on my own for this, but I was wondering if there is a good online (or book based) course for this. Like most kids, he's proficient with Google, YouTube, and Minecraft, but he's very curious, and I would like to teach him more. Even some basic excercises, like working with the file system would be good for him (i would need some help to not make it boring).

    Read the article

  • safari 5 doesnt work on my computer.

    - by Amairani409
    I just got the new version of safari y downloaded because my mac tell me there was new version that I should be getting. but when I try to run my this new version of the aplication .nothing happends¡ I mean the program seems to be working but nothing apears in the screen and so when I try to see my top sites a little window show up but it just dont show anything. then 3 seconds later the program shut down¡ I dont know why is happening this Im not so a expert in computers but this really is away of all I see on safari and on mac I got Mac OS X version 10.5.8 2.66ghz intel core 2 duo 4gb 1067 MHz DDR3

    Read the article

  • CPU clock scales down so computer is unusable after switching to battery

    - by Ryan
    When I am plugged in my laptop runs great however when I unplug it and I'm on battery power my CPU clock speed scales down pretty much all the way. I know this is happening by monitoring the clock speed. When plugged in it will usually stay between 1000MHz and 3000MHz but when I unplug it it quickly scales down to less than 500MHz and will get as low as 100MHz and it will NEVER scale up at all on battery power. After I plug the power back in it will then begin operating normally in about a minute. I have tried setting the MIN and MAX CPU performance in power options to 100% and have tried messing around with cooling settings which seemed to be a problem with HP laptops. I have a Toshiba Satellite M500-ST6444 running Windows 7. The BIOS is up to date. I have tried two versions.

    Read the article

  • Figuring out which PC part is faulty

    - by Davy8
    I have an odd scenario and I'm having trouble figuring out which is the faulty component. First of all, the video doesn't work, monitor says it's not getting a signal. Monitor's not faulty (works on other computer) so the first suspect was video card. However 2 things make me think it's not the video card. (Don't have another machine with PCIe around to test definitively) First, the GPU fan is spinning so it's getting power. Second, tried putting in an older PCI video card that is known to be working (pulled out of another working machine) and there's still no video. Normally if it's not the video card I'd suspect the motherboard, but everything's getting power on the mobo, so I'm not sure. The case apparently doesn't have system speakers, so can't hear any of the diagnostic beeps either. Also not sure whether a faulty CPU would cause no image at all either. The parts are brand new so something's going to get RMA'd but I'm not sure which component is to blame in this case. (Only slightly related, but I also accidentally put too much thermal paste on the CPU. The fan/heatsink instructions said to put the whole tube which seemed like a lot compared to previous experience, and as I started squeezing I knew it was definitely too much and stopped at about 1/3 but against my better judgement I didn't wipe any off. I'm not sure whether that would cause problems other than not cooling as effectively as it should)

    Read the article

  • Computer temporarily freezes and then resumes

    - by trizicus
    This happens on ALL operating systems (7, Ubuntu, etc.). What happens is everything for 1-3 seconds becomes unresponsive, I then hear what sounds like my other internal hard drive 'spinning up', and then viola everything is responsive again. Note: Already ran SMART tests, no issues at all. I think issue is that the HDD spins down and when need it gets 'turned-on' (OS settings turn off HDD's after 20 mins of inactivity) and because my pagefile is on the other HDD it causes OS to temporarily freeze. Need more tips, and insight. Thanks More info: Running Quad CPU, 4GB RAM, Intel SSD, GT 240.

    Read the article

  • How to install Windows with no CD drive boot option in BIOS?

    - by Kris Hollenbeck
    I have a new computer which I built from scratch and I am trying to install a copy of Windows Vista on it. I am able to get to the BIOS and change the boot options which are as follows.. -Built-in EFI Shell -SATA: ST31000528AS I have searched around for and everything I find says to boot from the CD rom. However, as you can see. That is not an option for me. So I am wondering if there is another way around this? Is it possible to boot the Disk from the EFI Shell? Any help is much appreciated. Thanks EDIT: I have tried this.. http://technet.microsoft.com/en-us/library/dd744321%28v=ws.10%29.aspx UPDATE: I managed to make my USB bootable via the BIOS and I have copied my windows Vista disk onto my USB via drag and drop. However I am still not able to get the windows install to start. Also I have tried booting it from the EFI shell using the following command.. blk6: blk6:\> \EFI\BOOT\BOOTX64.EFI Still no luck..

    Read the article

  • Computer Invisible On Domain

    - by Giawa
    Good afternoon, I'm sorry that this isn't a programming question specifically, but stackoverflow has been great at answering questions in the past, so I thought I'd give it a shot. One of our Linux users attempted to install Cygwin on our Windows Server 2008 Domain Controller. Now it is no longer possible to browse the domain and see all of the computers. For example, \\my_domain_name will just bring up a username/password dialog box (that will not accept any username or password, even the domain administrator) and no computers will ever be listed. However, I can still connect to computers based on their name or IP address. So \\eridanus or \\192.168.1.85 still work to connect to the shared directories of computers on our network. Does anyone know where I can find these settings? and how I can fix this problem? Thanks, Giawa

    Read the article

  • Program to set time on local computer using GPS data

    - by dmkerr
    I have a laptop running Windows XP that does not connect to the Internet and I would like to use a USB GPS receiver as a time source to set the clock. Generally, the laptop will not have access to the open sky so getting a strong, multi-satellite connection is not likely. Ideally, I would like to be able to have the program detect the GPS receiver and set the clock without intervention from the user. Is what I'm seeking even feasible?

    Read the article

  • Move/migrate vbox virtual machine to another computer along with snapshots

    - by user53864
    I have sun virtualbox(2.2) installed on windows xp and I've some VMs(ubuntu server) running with many snapshots . How do I move virtualbox VDIs along with all the snapshots to new windows system?. I tried copying the base vdi and creating it newly on a new system and it worked fine but could not move the snapshots of the vms. I even tried copying Virtualbox.xml and machine's xml file to the new system and manually editing the snapshots location to the new place in the virtualbox.xml file, the snapshots are listed in the snapshots tab(but when I checked snapshots location in the vm's settings it's showing the default location having edited it) but when I try to use the snapshots, reverting to current, it's not booting(some snapshots giving grub 2 error, some got stalled at the boot). I also tried export and import but only current state I could export and use it on the new system with no snapshots. Is there any way I could achieve this?. Please need help...

    Read the article

< Previous Page | 52 53 54 55 56 57 58 59 60 61 62 63  | Next Page >