Search Results

Search found 2385 results on 96 pages for 'credit cards'.

Page 56/96 | < Previous Page | 52 53 54 55 56 57 58 59 60 61 62 63  | Next Page >

  • Does Windows 8 Need New, Specialized Drivers?

    - by Synetech
    It seems like an obvious question, but I’m having a difficult time finding out if Windows 8, with all its changes, will require new, specialized drivers. I see that a lot of manufacturers have started releasing Windows 8-specific drivers for their hardware, but what about those that are not, will Windows XP or 7 drivers work or have they changed the driver/system/security architecture again, thus requiring new drivers? The closest thing I could find to an answer was a thread in which it was mentioned that the display driver model was again updated, thus requiring new display drivers, but not much else (e.g., audio cards, printers, chipsets, etc.)

    Read the article

  • ESXI 4.0 Slow response in opening anything accross the network on a Virtual Server running Win2008

    - by user40944
    Hi I recently installed a HP ML350G6 Server with Windows Small Business Server 200864bit, Exchange 2007. The server was running fantastically and we transferred all user data onto the new server and no problems for 2 weeks! We then installed SQL2008 and transferred the accounts package onto the server and this is where the problems started. Users are now complaining to open a work document can take 2 minutes and the same with regard to anything else. The server itself seems fine, the virtual server seems fine! No disk performance problems (doesn't go above 50% unless i really copy lots of things), no memory, (12Gb only using 7Gb) cpu (usage is low average about 15%) etc on both the VM and in Windows Task manager. I have made sure disk caching is enabled on the raid controller (which made no difference). Network cards are running 1Gb and plugged into HP GB switch. Please help!

    Read the article

  • Any way to tell apart a CPU defect from a mainboard defect?

    - by Pekka
    I have a fairly modern desktop computer, an AMD Athlon II X2 based silent PC, that does not work. When turned on, it will start physically (all fans are rotating, disks start up...) but not give a signal on any of the graphics ports (DVI, VGA, and HDMI, I tried all three). Also, the reset button does not seem to have any effect. I have stripped the mainboard bare of all SATA connections, extension cards, and the one 2GB RAM chip to eliminate them as the problem source, but to no avail, so I think it's fair to assume it's either the mainboard or the processor that are at fault. However, I have neither a replacement mainboard, nor a replacement processor handy to identify which one is broken. The cause of the defect is unknown, so for all I know, it could be both. Therefore, I'm reluctant to buy replacement hardware blindly before knowing more. Is there any way to further diagnose (or at least get some indication) which component is broken without buying replacement hardware?

    Read the article

  • What sort of things can cause a whole system to appear to hang for 100s-1000s of milliseconds?

    - by Ogapo
    I am working on a Windows game and while rendering, some computers will experience intermittent pauses ("hitches" for lack of a better term). When profiled they appear in seemingly random places in the code. Eventually I noticed that it wasn't just my process that was affected, but (seemingly) every process on the system. All of the threads in my application hitch at once. The CPU utilization drops during these hitches and it appears as if most processes make no progress. This leads me to believe this may be an Operating System or Driver issue, but it only occurs while playing the game (and only on some systems). What sort of operations might the operating system be doing that would require the kernel to pause all user threads and block. Some kind of I/O? At first I thought of paging but my impression is that would only affect a single process, no? Some systems in use: Windows, DirectX (3d), nVidia cards (unknown if replicates on ATI), using overlapped io for streaming

    Read the article

  • VMware Fusion on MacBook Pro running Vista, not working after installing a wireless card

    - by Shelley
    A tech friend installed VMware on my Mac so I could use my Windows programs as well. It worked great until I inserted my Sierra 881 USB wireless card while in VMware trying to get to the internet while on the road. It worked briefly, then the AT&T Communication manager won't respond when you click on the icon, I can't open Network and Sharing center, I can't sync my palm - shows it can't connect. Looks like it messed up several things, along with not being able to connect to the internet while in windows. This wireless cards works directly from the Mac - but I need internet while in Windows for some work I am doing. How do I uninstall this - when I try - it just gives me an endless reloading circle - not doing anything. I really need to sync my palm and get back to the way it was. I don't know much about VMware at all and I don't have access to my friend right now to get help.

    Read the article

  • Ultrabook graphics card for gaming

    - by Francisc
    I want to get a Windows 8 "ultrabook" that I can also use for gaming. Most seem to have Intel HD Graphics 4000 (integrated) or NVIDIA GeForce GT 620M (dedicated). From experience, are they any good? Things I enjoy playing are Call of Duty, Fifa and Skyrim for example. I'm looking for a device that will work on the next generation of those games as well, so it shouldn't just barely work on the current versions that exist now. So, would those two cards suffice? Any advice is much appreciated. Thank you.

    Read the article

  • Windows 7 ATI 6470M

    - by p_piorkowski
    I have some problems with my Dell Vostro 3350. I have to graphic card - Intel and ATI radeon 6470M. I have installed this driver. It's fresh installation of Windows 7. And my problem is that in device menager I can see in section graphic cards AMD Radeon HD 6490M and Intel(R) Graphics Family. Another thing is that I'm using two screens. And I want to use ATI readeon as default. At this moment I'm event not sure if ATI is working. Another strange thing is that when I run Catalyst Control Center in section Destkop Menagement i don't see nothing.

    Read the article

  • Network Performance issue

    - by qubemarker
    We have three Ubuntu 10.04 servers. One server is a storage server and the other two servers are configured as clients. The storage server has a good amount of capacity and it is integrated with windows Active directory server for Authentication. I am uploading some video files from both clients to the server and when I am uploading data from any one client alone I get about 26 MB/s data transfer rate. When I upload data from both the clients simultaneously I am only getting about 8 MB/s from each client. I have gigabit ethernet cards in all of the servers and a L2 Managed gigabit switch for connectivity. I don’t know why the data transfer rate is decreasing so much in simultaneous read and write. I have tried all of the TCP stack related settings suggested here. Can any assist with getting better read/write performance out of this setup? Any help is appreciated.

    Read the article

  • what are the rules for SLI ( GTX 550 Ti )

    - by equivalent8
    I got ASUS GTX 550 Ti and I want to SLI it with another graphic card. I heard that not all graphic cards are good idea to SLI, (or not all combinations) because sometimes the final performance could be even worse that with one graphic card. Is that true? What are the rules ? ( maybe chip-set needs to be same or something ? ) I was wondering if you can recommend me what Graphic card should I use as with mine. Should I use same one (GTX 550 Ti) ?

    Read the article

  • Does a modern PC require a graphics card to run?

    - by ArtM
    As I can remember, on old systems (Pentium II or III) it was not possible to boot and run the PC if the graphics card was missing (AGP cards were used in those days). Many years from then, I'm using motherboards with integrated graphics and I have no experience related to this subject, the "graphics card" always was present. Currently I intend to build a home/private "server" for my purposes and most of the motherboards I want to buy have no integrated graphics (AMD 870 or 970). I can take a normal graphics card from my firends for a few hours/days and use it when installing the necessary software. The question is: can I boot and run the PC without problems after I install everything I need and the graphics card is removed? if a general answer cannot be given, at least some examples of manufacturers/MB series/MB models will be helpfull I think it's obvious, but for completeness: I mean cheap desktop components, not real servers.

    Read the article

  • How do I listen to my microphone through my speakers in Windows 7?

    - by Gray Adams
    I've looked about and before you say it: I've used the "Listen to this device" feature built into Windows. The issue is that it is a USB microphone and there is a second delay before when it plays on the speakers, literally making me go quiet because my brain doesn't work too well hearing myself a second after I say something. I use Realtek Audio, so it works differently from the monopolistic Creative sound cards. There is no "What U Hear" or "Line In" levels. It's just "Speakers" and "Microphone". Is there a software I can use that will not have delay? I want to wear nice headphones and still hear myself

    Read the article

  • Graphics card for dual 2560 x 1440 output

    - by Bender
    As the title suggests I want to power two 2560 x 1440 monitors from one graphics card. I am just about to send my second graphics card back to Amazon, so before I purchase a 3rd incorrect card I thought I should get some advice. My latest card has dual DL-DVI output but only supports 2560 x 1440 on one output, the other maxes out at 1920 x 1080. Can graphics cards with two Dual Link DVI adapters (or alternately, one Dual Link DVI and one DisplayPort support the a full 2560 x 1440 on both monitors, or does that depend on the graphics hardware and not only the connectors?

    Read the article

  • use correct-resolution background desktop image

    - by Rob Bos
    I have a desktop background image (a picture) in a half-dozen different resolutions, that I'd like to deploy to a disparate collection of computers with different monitors and video cards and whatnot. Laptops, netbooks, desktops, widescreen, and even a couple of "tall" screens. I have images to cover most of the cases. I would like Windows 7 to correctly pick the correct desktop background image via group policy. Now, the logon screen is already done. The OEMBackground method is rather clever, and lets you copy files of different resolutions to the machine, and the logon app will calculate the aspect ratio of the monitor and match it to a file as closely as possible. Is there any way to have that functionality on the desktop background as well?

    Read the article

  • Configure clients to navigate through specific wan. Pfsense

    - by leandronn
    I have a machine with a pfsense running. It is configured with three ethernet cards. LAN 192.168.2.1/21 WAN1 200.41.X.2/24 WAN2 200.41.X.3/24 ISP Gateway 200.41.X.1 This is a connection with 5 different IP addresses. WAN1 and WAN2 are directly connected to my ISP router. I need a way to configure some clients navigating through WAN1 and some through WAN2. I am new to pfsense so, please, if you can send me some examples to do this. I can add two squids if it is necessary. Thanks a lot.

    Read the article

  • UVC device Logitech WebCam 9000 pro

    - by Pavel
    There is such a good webcam in universe that acts as a "USB Video Class" (UVC - video USB standart interface) - the logitech webcam 9000. UVC offer unified interface allowing to control it or grab a picture from it by any UVC-driver. You need one universal driver and you support all the UVC devices (webcams, video-cameras, video-grabbing-cards etc). For example, in linux - if you have UVC driver - you don't need to think about specific webcam driver for UVC webcam. UVC has unified way that webcam transmit its awailable resolutions and other capabilities, so i see 1600x1200 resolution without any problem. I wonder if windows 7 has UVC. I mean "universal UVC" (-; It says "USB Video Class", but doesn't give resolutions larger than 640x480 and webcam's controls, like 'sharpness', 'focus' and other as linux's driver does...

    Read the article

  • Has anyone seen an HTTP 500 error when HTTPS traffic going through Pound Proxy forwards to an HTTP page?

    - by scientastic
    We have Varnish as our load balancer and reverse proxy cache for normal HTTP traffic. For HTTPS traffic, we use Pound proxy to unwrap the SSL and forward to Varnish, which then forwards to the back-end servers. This is used for our "checkout" process to encrypt credit card info in transition. However, on the last stage of checkout, users are always getting an HTTP 500 (Internal Server) error. It doesn't seem to be due to our back-end app server, by all tests I've tried. Does anyone know anything about how that transition works-- the transition back from HTTPS to HTTP and the interaction between Pound and Varnish-- and why it might cause 500 errors?

    Read the article

  • Gigabit connection between 2 computers

    - by Alecu
    I am trying to set up a connection between 2 pc's. It's a direct cable connection. The problem that I am having is that the connection isn't gigabit. I know both network cards support gigabit. I checked in the device settings and in one pc I can see in the Speed & Duplex the 1Gbps option but on the other pc I can't see that option despite the fact that the network card is gigabit. I have quite some files to copy from one pc onto another and I really need a good connection between them. I can't really remove the hard drive because it would void the warranty. Could this be a driver issue or a cable issue? On both pc's I have windows 8. The network card on the pc that doesn't have the 1 gbps option is an Atheros ar8161 card.

    Read the article

  • how to monitor traffic at port 53 (DNS)

    - by Registered User
    I am a bit confused with the abundant tcpdump tutorials on internet. I am having a few of the virtual machines running on a virtualization server.Where I am debugging a problem.Port 53 is the one in problem. I have a bridged setup where out of 4 LAN cards on the machine in question one is active and it is xen-br0 I want to check if there is any request coming on port 53 on the server by other machines on LAN in question. I also want to see if the guest operating systems on LAN or any other machine is sending traffic at port 53.Due to abundant messages being generated via tcpdump I am finding it difficult to grep the output at desired port. So how can I use it if some one can give an example that would be helpful. Thanks in advance.

    Read the article

  • Recommendation for hardware upgrade: thin clients? Or...?

    - by Alex C.
    I work for an animal shelter in Upstate New York. We have about 50 machines running XP Pro. They're connected to a Windows network with a domain. About half of these computers are used for nothing more than using two web-based apps -- one to keep track of our animals, the other to process credit cards. Having a full-blown desktop PC seems like overkill for this purpose. The PCs are three-to-five years old, and I'd like to come up with a plan to upgrade the hardware. Our donations are down (not surprising, given the economy), so cost is a big factor. Can people recommend some options? Some sort of thin client, maybe?

    Read the article

  • how to disable to automatic wireless interface up in ubuntu? [closed]

    - by Surjya Narayana Padhi
    On my laptop I have a built in wireless card and I got one external connected via usb. By ifconfig command I saw both the cards connects to internet and gets IP. eth1 - the interface my laptop has in-built wlan1 - I have connected externally via usb. Now I applied "sudo ifconfig eth1 down" so that i can use only wlan1. But this eth1 goes down for sometime and then come up again automatically. So I am not able to test my externally usb connected wifi adapter. Can anyone suggest me way to disable eth1 interface?

    Read the article

  • How can I watch full size video on 1 monitor and work on another?

    - by jasondavis
    Here is my situation. I have 3 monitors hooked up to my new PC running off 2 video cards. When I watch a video on one of the monitors and make it go full screen on that monitor it is great, however as soon as I click anywhere on one of the other 2 monitors, it makes me lose the full screen mode of the video and makes it go back to it's original size. This happens when watching a flash or silverlight based video in Google chrome as well as when I watch video from a player such as iTunes. Is it possible to make a video play fullscreen on one of my monitors and still work in the other two screens without loosing my full screen mode on the one monitor?

    Read the article

  • One motherboard crashed. Changed and wants to crash again

    - by CoachNono
    My computer started to freeze randomly. I was pretty sure it was the hard drive that was starting to fail. Before I could change it, the motherboard was completely dead. I bought the same one and reinstall it. Everything went working well until my computer started to freeze again and doing the same problem has before. I don't want my motherboard to burn again and I'm really wondering what can be the problem... Could it be the power supply or the video cards that burned the motherboard ? I tested the voltages of the power supply and they seemed fine... The computer worked as is for four years... Here are the specs: ASUS P5N-D Motherboard LGA 775 NVIDIA 750i SLI Intel Q6600 2X EN9600GT 512mb 650w Corsair

    Read the article

  • Preventing an Apache 2 Server from Logging Sensitive Data

    - by jstr
    Apache 2 by default logs the entire request URI including query string of every request. What is a straight forward way to prevent an Apache 2 web server from logging sensitive data, for example passwords, credit card numbers, etc., but still log the rest of the request? I would like to log all log-in attempts including the attempted username as Apache does by default, and prevent Apache from logging the password directly. I have looked through the Apache 2 documentation and there doesn't appear to be an easy way to do this other than completely preventing logging of these requests (using SetEnvIf). How can I accomplish this?

    Read the article

  • network configuration

    - by carlcroom
    Hello all. I have just inherited a network at my work- 1 primary server and about 65 computers running XP. All machines have Gigabit ethernet cards and all are connected through Gigabit switches and cat. 6 cables. The workstations send large numbers of image files to the server where they are held until they need to go to a printer. And I'm talking Gigs of files. We get a network slowdown when large number of files are coming from the workstations at the same time large numbers are also going the the printers. All machines have to be on the same subnet because of some proprietary software. Is there anything I can do to lessen this logjam? Any help would be greatly appreciated.

    Read the article

  • Program for managing multiple monitors to keep from rearranging Windows

    - by Rumel
    I have a setup in use where I use up to four monitors. The problem is I generally switch around what I'm using and that messes up where all of my windows are. I'm on Windows 8 and have two graphics cards. My setup is as follows: Monitor 1: Card 1 Monitor 2: Card 1 Monitor 3: Card 2 TV 1: Card 2 I almost always have all the monitors turned on and in use. When I turn on the TV though, all of my windows get reconfigured and moved to different monitors. I don't know how to stop this. Another configuration I use is where I have Monitors 1 and 2 plus TV in use, and I have my Xbox in use on Monitor 3. When I get done with the Xbox and switch Monitor 3 over to the PC, everything is reconfigured. So is there a program out there that can help with this? I have the free version of Display Fusion in use but haven't seen settings to save monitor configurations.

    Read the article

< Previous Page | 52 53 54 55 56 57 58 59 60 61 62 63  | Next Page >