david alt - Page 56 - Developer IT

Hotkey to shut down Ubuntu 10.04 from login screen

- by Skizz

I used to run 9.04 on my server and used to be able to use Alt-T, Alt-S to shut the system down from the login screen. It was using a KDE login screen. Now I've upgraded to 10.04 and use the Gnome login screen and I can't see any keyboard shortcuts to shutdown the server. Is there a shortcut and if so, what is it? Further info - I would normally shut down the server without turning on the monitor, which was easy using the keyboard shortcuts. Doing it with a mouse is not so easy without the monitor being on.

Read the article

VMware Player and Ubuntu 12.04 - Full Screen

- by DotNetStudent

I have installed VMware Player 4.0.2 under Ubuntu 12.04 (Final) and, apart from having to patch the modules, everything went smoothly. However, there's an irritating behavior when toggling full screen mode: toggling full screen (using Virtual Machine Toggle Full Screen or Ctrl + Alt + Return), minimizing the player and maximizing it again changes the resolution of the guest to some strange one and the player gets "nested" between GNOME3's taskbar as every other of Ubuntu's native windows. To switch to full screen again I have to Ctrl + Alt + Return twice. Can anyone please tell me if this is the nromal, expected behavior? Is there any way of "correcting" it? The host operating system is Ubuntu 12.04 (Final) and the guest is Windows 7 (both 64 bits).

Read the article

GUI won't load, but the desktop background loads. Can't access the terminal

- by Mickeysofine

Having trouble with the Ubuntu GUI. I can log in just fine (see this)... everything looks normal there. But as soon as I put in my password, I get this. I tried a few different troubleshooting keyboard commands (ctrl+alt+t, crtl+alt+delete), and only the latter worked. I can interact with that window just fine, except I am unable to resize or move it. The first time I logged in, I got a dialog box that said, "Ubuntu has experienced an internal error. Send error report?" Doesn't say anything now. Yes I tried restarting it. Thanks a bunch, Michael EDIT: Trying to start a guest session leads to the same problem.

Read the article

When trying running Ubuntu 12.10 off a usb drive, I encounter an error while prevent me from doing anything else

- by Nil

The details are that I used Universal USB Installer version 1.9.1.8 from pendrivelinux.com to install ubuntu 12.10 onto a 4gb pendrive as per instruction on Ubuntu's website. However, after I boot with drive I am met with the following message: "The system is running in low-graphics mode. Your screen, graphics card, and input device settings could not be detected correctly. You will need to configure these yourself." Pressing Ctrl Alt F1 doesn't allow me access and the options on the dialog box either send me through a loop returning me to the previous dialog or just leave me dead in the water. Pressing Ctrl Alt Del does however restart the computer if I am dead in the water, so ubuntu isn't COMPLETELY unresponsive... I feel I should mention that I'm trying to run this distribution on my netbook. I can't install it directly to the harddrive since I need my current Windows distribution for certain programs that don't quite agree with WINE yet.

Read the article

Compiz features stopped working when an external monitor is attached

- by adjfac

Running 12.04 on a thinkpad T520 with nVidia NVIDIA Quadro NVS 4200M graphics. Just updated to the lasted nvidia 310 driver. Everything works great. However, as soon as I attached an external monitor using nvidia twinview, compiz features such as scale (moves all the active windows in one page) stopped working, as well as alt-tab to list all opened programs. Any ideas how i can fix this? never had this problem with 11.04. I can post my xorg.conf if that's of use to you. Thanks much! edit 1: I am using gnome3 classic edit 2: alt-tab works -- compiz application switcher (by default for gnome3 / unity) will crash gnome-classic, by changing to "static application switcher" in compiz seemed to solve the problem, but the scale still does not work when an external monitor is attached.

Read the article

Ubuntu freezes while working

- by webid4me

Ubuntu on my laptop has frozen multiple times in last 6-7 months. Its not frequent but I can not relate the freezing to anything which I was doing. Today it froze again when I was taking notes in class - approximately at 12:00 PM. During the freeze both mouse and keyboard stopped working. I tried Alt-Ctrl-F1, Alt-Ctrl-F2 etc without any success. After that I waited few minutes & then I restarted the laptop. I checked /var/log/syslog and /var/log/kern.log and it seems that it did not log anything (I was not able to understand most of it). Please let me know if you can find something unusual at around 12:00 PM. Is there any other log which might be useful? Here are the /var/log/syslog and /var/log/kern.log files.

Read the article

HTML Email template Table help needed

- by user1870691

I need help setting up an email newsletter template as one of the columns is not being displayed properly, the column containing heading 2 is not being displayed properly it is being displayed towards right side of the page instead of aligning with the template elements. Here is the code: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html> <head> </head> <body>                                         <table border="0" align="center" cellpadding="0" cellspacing="0" class="cont-bg" bgcolor="#f1f1f1" style="background-color: #f1f1f1; padding: 27px 0px 0px; width: 100%; background-position: initial initial; background-repeat: initial initial;"> <tbody> <tr> <td align="center" valign="top" width="1133">                                                                                                                                  <table border="0" align="center" cellpadding="0" cellspacing="0" style="width: 650px;"> <tbody> <tr> <td align="left" valign="top">                                                                   <table border="0" align="center" cellpadding="0" cellspacing="0" style="width: 650px; height: 682px;"> <tbody> <tr> <td colspan="2" align="right" valign="top" mc:edit="view" style="font: normal 12px arial, helvetica, sans-serif; color: #000000; padding-bottom: 22px;">You can’t see this email?<a href="#"> View it in your browser.</a></td> </tr> <tr> <td width="287" align="left" valign="top" bgcolor="#ffffff" style="background: #fff;">                                    <p align="left"><br /> <img src="commstellogo.png" width="208" height="45" border="0" align="left" /></p> </td>  <td width="363" height="94" align="left" valign="middle" bgcolor="#ffffff" style="background: #fff;">                                      <table border="0" cellspacing="0" cellpadding="0" style="width: 340px;"> <tbody> <tr> <td align="right" valign="top" mc:edit="date" style="font: bold 18px arial, helvetica, sans-serif; color: #2f2f2f; text-transform: uppercase; padding-bottom: 8px;">01727 260 101</td> </tr> <tr> <td align="left" valign="top">                                                                                                                  <table border="0" cellspacing="0" cellpadding="0" style="width: 340px;"> <tbody> <tr> <td width="16" align="left" valign="top"><img mc:edit="h-icin" src="images/home-icon.png" width="16" height="19" alt="" /></td> <td width="64" align="left" valign="middle" mc:edit="h-text" style="font: bold 12px arial, helvetica, sans-serif; color: #414141; padding-left: 9px;"><a href="#" style="color: #414141;">Home</a></td> <td width="16" align="left" valign="top"><img mc:edit="s-icon" src="images/setting.png" width="16" height="19" alt="" /></td> <td width="79" align="left" valign="middle" mc:edit="s-text" style="font: bold 12px arial, helvetica, sans-serif; color: #414141; padding-left: 9px;"><a href="#" style="color: #414141;">Services</a></td> <td width="16" align="left" valign="top"><img mc:edit="a-icon" src="images/about-us.png" width="16" height="19" alt="" /></td> <td width="77" align="left" valign="middle" mc:edit="a-text" style="font: bold 12px arial, helvetica, sans-serif; color: #414141; padding-left: 9px;"><a href="#" style="color: #414141;">About us</a></td> <td width="18" align="left" valign="top"><img mc:edit="s-icon" src="images/support.png" width="16" height="19" alt="" /></td> <td width="54" align="right" valign="middle" mc:edit="s-text" style="font: bold 12px arial, helvetica, sans-serif; color: #414141; padding-left: 9px;"><a href="#">Contact</a></td> </tr> </tbody> </table> </td> </tr> </tbody> </table> </td> </tr> <tr> <td colspan="2" align="left" valign="top" height="548">                        <table border="0" cellspacing="0" cellpadding="0" style="width: 650px;"> <tbody> <tr> <td align="left" valign="top"><img mc:edit="banner-image" src="#" width="649" height="356" alt="" style="display: block;" /></td> </tr> <tr> <td align="left" valign="top" bgcolor="#2f2f2f" style="padding: 25px 0px 18px 20px; background: #2f2f2f;">                                                       <table border="0" cellspacing="0" cellpadding="0" style="width: 611px;"> <tbody> <tr> <td align="left" valign="top" mc:edit="banner-title" style="font: normal 24px arial, helvetica, sans-serif; color: #fff; padding-bottom: 8px;">Heading Area</td> </tr> <tr> <td align="left" valign="top" mc:edit="banner-text" style="font: normal 12px arial, helvetica, sans-serif; color: #fff; line-height: 18px; padding: 0px 0px 12px 4px;">Vivamus interdum mauris urna. Nullam egestas augue elit. Aliquam pretium elit varius metus hendrerit volutpat. <b>20% off</b> Vivamus interdum mauris urna. Nullam egestas augue elit. Aliquam pretium elit varius metus hendrerit volutpat.</td> </tr> <tr> <td align="left" valign="top"><a href="#><img mc:edit="banner-read-more" src="#" width="128" height="31" alt="" /></a></td> </tr> </tbody> </table> </td> </tr> </tbody> </table>            </td> </tr> </tbody> </table>               </td> </tr> <tr></tr> <tr> <td width="330" align="left" valign="top">                                                                                                                                  <table border="0" cellspacing="0" cellpadding="0" style="width: 320px;"> <tbody> <tr> <td align="left" valign="top"><img mc:edit="two-coulmn-image1" src="businesstelephone.png" width="320" height="172" alt="" style="display: block;" /></td> </tr> <tr> <td align="left" valign="top" bgcolor="#2f2f2f" style="padding: 15px 0px 18px 20px; background: #2f2f2f;">                                                                      <table border="0" cellspacing="0" cellpadding="0" style="width: 288px;"> <tbody> <tr> <td align="left" valign="top" mc:edit="banner-title" style="font: normal 24px arial, helvetica, sans-serif; color: #fff; padding-bottom: 5px;">Heading 2</td> </tr> <tr> <td align="left" valign="top" mc:edit="banner-text" style="font: normal 12px arial, helvetica, sans-serif; color: #fff; line-height: 18px; padding: 0px 0px 12px 4px;">Praesent viverra dui in orci pulvinar convallis. Nunc interdum, metus eget adipiscing rutrum, leo quam accumsan tellus, eget . It's easy and hassle free!</td> </tr> <tr> <td align="left" valign="top"><a href="#"><img mc:edit="read-more" src="#" width="128" height="31" alt="" /></a></td> </tr> </tbody> </table>    </td> </tr> </tbody> </table>                                                                             </td> <td width="320" align="left" valign="top">                                                                                                                                               <table border="0" cellspacing="0" cellpadding="0" style="width: 320px;"> <tbody> <tr> <td align="left" valign="top"><img mc:edit="two-coulmn-image2" src="mobiles.png" width="320" height="172" alt="" style="display: block;" /></td> </tr> <tr> <td align="left" valign="top" bgcolor="#2f2f2f" style="padding: 15px 0px 18px 20px; background: #2f2f2f;">                                                                      <table border="0" cellspacing="0" cellpadding="0" style="width: 288px;"> <tbody> <tr> <td align="left" valign="top" mc:edit="banner-title" style="font: normal 24px arial, helvetica, sans-serif; color: #fff; padding-bottom: 5px;">Heading 3</td> </tr> <tr> <td align="left" valign="top" mc:edit="banner-text" style="font: normal 12px arial, helvetica, sans-serif; color: #fff; line-height: 18px; padding: 0px 0px 12px 4px;">Nunc vel massa metus, vel varius mi. Sed sagittis consectetur nisi, sed imperdiet ipsum interdum non. Nunc consectetur odio et turpis eleifend semper. Pellentesque lorem purus</td> </tr> <tr> <td align="left" valign="top"><a href="#"><img mc:edit="read-more-1" src="images/read-more.png" width="128" height="31" alt="" /></a></td> </tr> </tbody> </table>                </td> </tr> </tbody> </table>                                                   </td> </tr>  <tr> <td> </td> </tr> </tbody> </table> </td> </tr> <tr> <td align="left" valign="top">           <table border="0" cellspacing="0" cellpadding="0" style="width: 687px;"> <tbody> <tr> <td align="center" valign="top" bgcolor="#ffffff" style="background: #fff; padding: 28px 0px 27px 0px;" width="687">                                      <table border="0" align="center" cellpadding="0" cellspacing="0" style="width: 675px;"> <tbody> <tr> <td align="center" valign="top" mc:edit="un-sp-text" style="font: normal 12px arial, helvetica, sans-serif; color: #737373; line-height: 18px;" width="675">                                    <p align="center"><b>Copyright © 2012 Company - Registered & Dales 07765116</b></p> </td> </tr> <tr> <td align="center" valign="top" mc:edit="c-right-text" style="font: bold 12px arial, helvetica, sans-serif; color: #737373; line-height: 18px;" width="675">                                                <p align="center">Company Address<br /> T: 023227 000 201  E: <a href="#">[email protected]</a>  W: <a href="#">company</a></p> </td> </tr> </tbody> </table> </td> </tr> <tr> <td align="center" valign="top" style="padding: 20px 0px 35px 0px;" width="687">                        <p align="center">If you wish to unsubscribe from this email, please click here</p> </td> </tr> </tbody> </table> </td> </tr> </tbody> </table>              </body> </html>

Read the article

Video Bug in Ubuntu 12.10 MSI CX623 laptop

- by user104731

http://www.youtube.com/watch?v=5xyJkS8XjgA&feature=youtu.be I managed to take a video with what happens on my Ubuntu 12.10 laptop when I play with the volume and hover with the mouse over the slider and when I press Ctrl + Alt + D (show Desktop/minimize all) The real bugs are those in which the panel becomes transparent on the down side, exactly above the volume slider (and not only when that slider appears, but also when brightness slider appears, and when blocking my touchpad applet appears) and when I have a maximized window, more maximized windows or a non maximized window that touches the panel, while I use Ctrl+Alt+D (show Desktop/hide all normal windows). Is there a way to solve this bug? PS: The other bugs are from Record My Desktop. I didn't have the mentioned bugs in ubuntu 12.04, but I like more the graphics in 12.10.

Read the article

Missing Firefox app icon

- by frozenkoi

I'm using Ubuntu 11.04 (upgraded from LTS 10.04) and Firefox (version 11) doesn't show it's icon in the Window List panel, in the Firefox window top left corner (system menu) nor when using ALT+TAB to switch applications. I'm using unity 2D since I'm running ubuntu as a guest in a VMWare virtual machine (Host is windows 7) Instead of the Firefox icon I get what appears to be a generic icon that looks like an app window in the window list and a black rectangle with a curl in the bottom right corner in the ALT+TAB window. How do I fix this so that the proper Firefox icon gets displayed? EDIT: Depending on the icon set chosen in the Appearence settings window sometimes I get the icon, sometimes I don't. When using Ubuntu classic none of the icon sets provide the icon for Firefox.

Read the article

Creating a Form That Doesn't Take Focus.

Popup forms that won't take focus even if clicked on, and cannot be alt+tabbed onto.

Read the article

How to organize pictures on website using css? [on hold]

- by user3624023

Here is my website without any CSS: http://www.wmcicompsci.ca/cs20/students/theglowcloud/Bare%20bones%20website/classics_bare.html I am new to CSS and I would like to organize pictures these pictures in this fashion: http://css-tricks.com/examples/SlideinCaptions/ I would just like this layout for the pictures but I do not need the sliding of the captions(although I would like to but it does not work my browser). I would like the captions to be like titles on top of the pictures. Here is my current html code: <!DOCTYPE html> <html> <head> <title> My favourite Fantasy books</title> <meta charset = "utf-8"> <link rel="stylesheet" href="css.css"> </head> <body> <nav id="main_nav"> <ul> <li><a href = " homepage_css.html"> Homepage</a></li> <li><a href="science_fiction_css.html">Science Fiction</a></li> <li><a href="classics_css.html">Classics</a></li> <li><a href="fantasy_css.html">Fantasy</a></li> </ul> </nav> <h1> Fantasy Genre</h1> <p> Here are my favourites:</p> <ul> <li> Goblet of Fire by J.K Rowling (4th book in the Harry Potter Series) </li> <li><img class= displayed src="pics/fantasy/goblet_of_fire.jpg" width="200" alt="Goblet of Fire book cover"></li> <li> Graceling by Kristan Cashore </li> <li><img src="pics/fantasy/graceling.jpg" width="200" alt = " Graceling book cover"></li> <li> Serpent's Shadow by Rick Riordan (3rd book in the Kane Chronicles) </li> <li><img src="pics/fantasy/serpents_shadow.jpg" width="200" alt="Serpent's Shadow book cover"></li> <li> The Hobbit by J.R.R. Tolkein </li> <li><img src="pics/fantasy/the_hobbit.jpg" width="200" alt="The Hobbit book cover"></li> <li> The False Prince by Jennifer Neilson (1st book in the Ascendance Triology) </li> <li><img src="pics/fantasy/the_false_prince.jpg" width="200" alt="The False Prince book cover"></li> </ul>

Read the article

How to disable the "roll up" / "shade" keyboard shortcut in Gnome 3 (after upgrading to 12.04)?

- by torpesco

I am using Gnome 3. After upgrading from 11.10 to 12.04, "Ctrl-Alt-S" was reclaimed for use in toggling the shaded state of a window. I have checked the following places, and I haven't been able to find any instance of a keybinding set for toggling the shaded state. System Settings / Hardware / Keyboard / Shortcuts (as per How do I disable Ctrl+Alt+s to minimize a window?) I even tried setting a different shortcut. Made no difference. dconf-editor (now deprecated, from what I've found) gconf-editor/gsettings What am I missing?

Read the article

RUN FUNCTION AFTER SOMETIME IN JQUERY & AUTOMATIC SLICING OF IMAGES

- by user2697032

I am not being able to start the automatic slicing of images, it is happening only after a click, how should i modify my code so that i get to change the slicing of the images automatically. <!DOCTYPE html> <html lang="en"> <head> <title>Slicebox - 3D Image Slider</title> <meta charset="UTF-8" /> <meta http-equiv="X-UA-Compatible" content="IE=edge,chrome=1"> <meta name="viewport" content="width=device-width, initial-scale=1.0"> <meta name="description" content="Slicebox - 3D Image Slider with Fallback" /> <meta name="keywords" content="jquery, css3, 3d, webkit, fallback, slider, css3, 3d transforms, slices, rotate, box, automatic" /> <meta name="author" content="Pedro Botelho for Codrops" /> <link rel="shortcut icon" href="../favicon.ico"> <link rel="stylesheet" type="text/css" href="css/demo.css" /> <link rel="stylesheet" type="text/css" href="css/slicebox.css" /> <link rel="stylesheet" type="text/css" href="css/custom.css" /> <script type="text/javascript" src="js/modernizr.custom.46884.js"></script> </head> <body onload="funct()"> <div class="container"> <div class="codrops-top clearfix"> <a href="http://tympanus.net/Development/AutomaticImageMontage/"><span>« Previous Demo: </span>Automatic Image Montage</a> <span class="right"> <a target="_blank" href="http://www.flickr.com/photos/strupler/">Images by <strong>ND Strupler</strong></a> <a href="http://tympanus.net/codrops/?p=5657"><strong>Back to the Codrops Article</strong></a> </span> </div> <h1>Slicebox <span>A fresh 3D image slider with graceful fallback</span></h1> <div class="more"> <ul id="sb-examples"> <li>More examples:</li> <li class="selected"><a href="index.html">Example 1</a></li> <li><a href="index2.html">Example 2</a></li> <li><a href="index3.html">Example 3</a></li> <li><a href="index4.html">Example 4</a></li> </ul> </div> <div class="wrapper" id="checkthis"> <ul id="sb-slider" class="sb-slider"> <li> <a href="http://www.flickr.com/photos/strupler/2969141180" target="_blank"><img src="images/1.jpg" alt="image1"/></a> <div class="sb-description"> <h3>Creative Lifesaver</h3> </div> </li> <li> <a href="http://www.flickr.com/photos/strupler/2968268187" target="_blank"><img src="images/2.jpg" alt="image2"/></a> <div class="sb-description"> <h3>Honest Entertainer</h3> </div> </li> <li> <a href="http://www.flickr.com/photos/strupler/2968114825" target="_blank"><img src="images/3.jpg" alt="image1"/></a> <div class="sb-description"> <h3>Brave Astronaut</h3> </div> </li> <li> <a href="http://www.flickr.com/photos/strupler/2968122059" target="_blank"><img src="images/4.jpg" alt="image1"/></a> <div class="sb-description"> <h3>Affectionate Decision Maker</h3> </div> </li> <li> <a href="http://www.flickr.com/photos/strupler/2969119944" target="_blank"><img src="images/5.jpg" alt="image1"/></a> <div class="sb-description"> <h3>Faithful Investor</h3> </div> </li> <li> <a href="http://www.flickr.com/photos/strupler/2968126177" target="_blank"><img src="images/6.jpg" alt="image1"/></a> <div class="sb-description"> <h3>Groundbreaking Artist</h3> </div> </li> <li> <a href="http://www.flickr.com/photos/strupler/2968945158" target="_blank"><img src="images/7.jpg" alt="image1"/></a> <div class="sb-description"> <h3>Selfless Philantropist</h3> </div> </li> </ul> <div id="shadow" class="shadow"></div> <div id="nav-arrows" class="nav-arrows"> <a href="#x">Next</a> <a href="#y">Previous</a> </div> <div id="nav-dots" class="nav-dots"> <span class="nav-dot-current"></span> <span></span> <span></span> <span></span> <span></span> <span></span> <span></span> </div> </div> <p class="info"><strong>Example 1:</strong> Default settings</p> </div> <script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jquery/1.8.2/jquery.min.js"></script> <script type="text/javascript" src="js/jquery.slicebox.js"></script> <script type="text/javascript"> $(function() { var Page = (function() { var $navArrows = $( '#nav-arrows' ).hide(), $navDots = $( '#nav-dots' ).hide(), $nav = $navDots.children( 'span' ), $shadow = $( '#shadow' ).hide(), slicebox = $( '#sb-slider' ).slicebox( { onReady : function() { $navArrows.show(); $navDots.show(); $shadow.show(); }, onBeforeChange : function( pos ) { $nav.removeClass( 'nav-dot-current' ); $nav.eq( pos ).addClass( 'nav-dot-current' ); } } ), init = function() { initEvents(); }, initEvents = function() { // add navigation events $navArrows.children( ':first' ).on( 'click', function() { setInterval("callme()", 1000); return false; } ); //$(function(){ //callme(); //}); function callme(){ //$('#checkit').append("callme loaded<br />"); slicebox.next(); setInterval("callme()", 1000); } $navArrows.children( ':last' ).on( 'click', function() { slicebox.previous(); return false; } ); $nav.each( function( i ) { $( this ).on( 'click', function( event ) { var $dot = $( this ); if( !slicebox.isActive() ) { $nav.removeClass( 'nav-dot-current' ); $dot.addClass( 'nav-dot-current' ); } slicebox.jump( i + 1 ); return false; } ); } ); }; return { init : init }; })(); Page.init(); }); </script> <script> // make sure the "myContainer" id in the script is the same id of the div $(document).ready(function() { slicebox.next(); $('#nav-arrows').sbslider(); // this is the piece of code that will do the magic thing }); </script> </body> </html> I am not being able to start the automatic slicing of images, it is happening only after a click, how should i modify my code so that i get to change the slicing of the images automatically.

Read the article

help me improve my sse yuv to rgb ssse3 code

- by David McPaul

Hello, I am looking to optimise some sse code I wrote for converting yuv to rgb (both planar and packed yuv functions). i am using SSSE3 at the moment but if there are useful functions from later sse versions thats ok. I am mainly interested in how I would work out processor stalls and the like. Anyone know of any tools that do static analysis of sse code? ; ; Copyright (C) 2009-2010 David McPaul ; ; All rights reserved. Distributed under the terms of the MIT License. ; ; A rather unoptimised set of ssse3 yuv to rgb converters ; does 8 pixels per loop ; inputer: ; reads 128 bits of yuv 8 bit data and puts ; the y values converted to 16 bit in xmm0 ; the u values converted to 16 bit and duplicated into xmm1 ; the v values converted to 16 bit and duplicated into xmm2 ; conversion: ; does the yuv to rgb conversion using 16 bit integer and the ; results are placed into the following registers as 8 bit clamped values ; r values in xmm3 ; g values in xmm4 ; b values in xmm5 ; outputer: ; writes out the rgba pixels as 8 bit values with 0 for alpha ; xmm6 used for scratch ; xmm7 used for scratch %macro cglobal 1 global _%1 %define %1 _%1 align 16 %1: %endmacro ; conversion code %macro yuv2rgbsse2 0 ; u = u - 128 ; v = v - 128 ; r = y + v + v >> 2 + v >> 3 + v >> 5 ; g = y - (u >> 2 + u >> 4 + u >> 5) - (v >> 1 + v >> 3 + v >> 4 + v >> 5) ; b = y + u + u >> 1 + u >> 2 + u >> 6 ; subtract 16 from y movdqa xmm7, [Const16] ; loads a constant using data cache (slower on first fetch but then cached) psubsw xmm0,xmm7 ; y = y - 16 ; subtract 128 from u and v movdqa xmm7, [Const128] ; loads a constant using data cache (slower on first fetch but then cached) psubsw xmm1,xmm7 ; u = u - 128 psubsw xmm2,xmm7 ; v = v - 128 ; load r,b with y movdqa xmm3,xmm0 ; r = y pshufd xmm5,xmm0, 0xE4 ; b = y ; r = y + v + v >> 2 + v >> 3 + v >> 5 paddsw xmm3, xmm2 ; add v to r movdqa xmm7, xmm1 ; move u to scratch pshufd xmm6, xmm2, 0xE4 ; move v to scratch psraw xmm6,2 ; divide v by 4 paddsw xmm3, xmm6 ; and add to r psraw xmm6,1 ; divide v by 2 paddsw xmm3, xmm6 ; and add to r psraw xmm6,2 ; divide v by 4 paddsw xmm3, xmm6 ; and add to r ; b = y + u + u >> 1 + u >> 2 + u >> 6 paddsw xmm5, xmm1 ; add u to b psraw xmm7,1 ; divide u by 2 paddsw xmm5, xmm7 ; and add to b psraw xmm7,1 ; divide u by 2 paddsw xmm5, xmm7 ; and add to b psraw xmm7,4 ; divide u by 32 paddsw xmm5, xmm7 ; and add to b ; g = y - u >> 2 - u >> 4 - u >> 5 - v >> 1 - v >> 3 - v >> 4 - v >> 5 movdqa xmm7,xmm2 ; move v to scratch pshufd xmm6,xmm1, 0xE4 ; move u to scratch movdqa xmm4,xmm0 ; g = y psraw xmm6,2 ; divide u by 4 psubsw xmm4,xmm6 ; subtract from g psraw xmm6,2 ; divide u by 4 psubsw xmm4,xmm6 ; subtract from g psraw xmm6,1 ; divide u by 2 psubsw xmm4,xmm6 ; subtract from g psraw xmm7,1 ; divide v by 2 psubsw xmm4,xmm7 ; subtract from g psraw xmm7,2 ; divide v by 4 psubsw xmm4,xmm7 ; subtract from g psraw xmm7,1 ; divide v by 2 psubsw xmm4,xmm7 ; subtract from g psraw xmm7,1 ; divide v by 2 psubsw xmm4,xmm7 ; subtract from g %endmacro ; outputer %macro rgba32sse2output 0 ; clamp values pxor xmm7,xmm7 packuswb xmm3,xmm7 ; clamp to 0,255 and pack R to 8 bit per pixel packuswb xmm4,xmm7 ; clamp to 0,255 and pack G to 8 bit per pixel packuswb xmm5,xmm7 ; clamp to 0,255 and pack B to 8 bit per pixel ; convert to bgra32 packed punpcklbw xmm5,xmm4 ; bgbgbgbgbgbgbgbg movdqa xmm0, xmm5 ; save bg values punpcklbw xmm3,xmm7 ; r0r0r0r0r0r0r0r0 punpcklwd xmm5,xmm3 ; lower half bgr0bgr0bgr0bgr0 punpckhwd xmm0,xmm3 ; upper half bgr0bgr0bgr0bgr0 ; write to output ptr movntdq [edi], xmm5 ; output first 4 pixels bypassing cache movntdq [edi+16], xmm0 ; output second 4 pixels bypassing cache %endmacro SECTION .data align=16 Const16 dw 16 dw 16 dw 16 dw 16 dw 16 dw 16 dw 16 dw 16 Const128 dw 128 dw 128 dw 128 dw 128 dw 128 dw 128 dw 128 dw 128 UMask db 0x01 db 0x80 db 0x01 db 0x80 db 0x05 db 0x80 db 0x05 db 0x80 db 0x09 db 0x80 db 0x09 db 0x80 db 0x0d db 0x80 db 0x0d db 0x80 VMask db 0x03 db 0x80 db 0x03 db 0x80 db 0x07 db 0x80 db 0x07 db 0x80 db 0x0b db 0x80 db 0x0b db 0x80 db 0x0f db 0x80 db 0x0f db 0x80 YMask db 0x00 db 0x80 db 0x02 db 0x80 db 0x04 db 0x80 db 0x06 db 0x80 db 0x08 db 0x80 db 0x0a db 0x80 db 0x0c db 0x80 db 0x0e db 0x80 ; void Convert_YUV422_RGBA32_SSSE3(void *fromPtr, void *toPtr, int width) width equ ebp+16 toPtr equ ebp+12 fromPtr equ ebp+8 ; void Convert_YUV420P_RGBA32_SSSE3(void *fromYPtr, void *fromUPtr, void *fromVPtr, void *toPtr, int width) width1 equ ebp+24 toPtr1 equ ebp+20 fromVPtr equ ebp+16 fromUPtr equ ebp+12 fromYPtr equ ebp+8 SECTION .text align=16 cglobal Convert_YUV422_RGBA32_SSSE3 ; reserve variables push ebp mov ebp, esp push edi push esi push ecx mov esi, [fromPtr] mov edi, [toPtr] mov ecx, [width] ; loop width / 8 times shr ecx,3 test ecx,ecx jng ENDLOOP REPEATLOOP: ; loop over width / 8 ; YUV422 packed inputer movdqa xmm0, [esi] ; should have yuyv yuyv yuyv yuyv pshufd xmm1, xmm0, 0xE4 ; copy to xmm1 movdqa xmm2, xmm0 ; copy to xmm2 ; extract both y giving y0y0 pshufb xmm0, [YMask] ; extract u and duplicate so each u in yuyv becomes u0u0 pshufb xmm1, [UMask] ; extract v and duplicate so each v in yuyv becomes v0v0 pshufb xmm2, [VMask] yuv2rgbsse2 rgba32sse2output ; endloop add edi,32 add esi,16 sub ecx, 1 ; apparently sub is better than dec jnz REPEATLOOP ENDLOOP: ; Cleanup pop ecx pop esi pop edi mov esp, ebp pop ebp ret cglobal Convert_YUV420P_RGBA32_SSSE3 ; reserve variables push ebp mov ebp, esp push edi push esi push ecx push eax push ebx mov esi, [fromYPtr] mov eax, [fromUPtr] mov ebx, [fromVPtr] mov edi, [toPtr1] mov ecx, [width1] ; loop width / 8 times shr ecx,3 test ecx,ecx jng ENDLOOP1 REPEATLOOP1: ; loop over width / 8 ; YUV420 Planar inputer movq xmm0, [esi] ; fetch 8 y values (8 bit) yyyyyyyy00000000 movd xmm1, [eax] ; fetch 4 u values (8 bit) uuuu000000000000 movd xmm2, [ebx] ; fetch 4 v values (8 bit) vvvv000000000000 ; extract y pxor xmm7,xmm7 ; 00000000000000000000000000000000 punpcklbw xmm0,xmm7 ; interleave xmm7 into xmm0 y0y0y0y0y0y0y0y0 ; extract u and duplicate so each becomes 0u0u punpcklbw xmm1,xmm7 ; interleave xmm7 into xmm1 u0u0u0u000000000 punpcklwd xmm1,xmm7 ; interleave again u000u000u000u000 pshuflw xmm1,xmm1, 0xA0 ; copy u values pshufhw xmm1,xmm1, 0xA0 ; to get u0u0 ; extract v punpcklbw xmm2,xmm7 ; interleave xmm7 into xmm1 v0v0v0v000000000 punpcklwd xmm2,xmm7 ; interleave again v000v000v000v000 pshuflw xmm2,xmm2, 0xA0 ; copy v values pshufhw xmm2,xmm2, 0xA0 ; to get v0v0 yuv2rgbsse2 rgba32sse2output ; endloop add edi,32 add esi,8 add eax,4 add ebx,4 sub ecx, 1 ; apparently sub is better than dec jnz REPEATLOOP1 ENDLOOP1: ; Cleanup pop ebx pop eax pop ecx pop esi pop edi mov esp, ebp pop ebp ret SECTION .note.GNU-stack noalloc noexec nowrite progbits

Read the article

SSAS Compare: an intern’s journey

- by Red Gate Software BI Tools Team

About a month ago, David mentioned an intern working in the BI Tools Team. That intern happens to be me! In five weeks’ time, I’ll start my second year of Computer Science at the University of Cambridge and be a full-time student again, but for the past eight weeks, I’ve been living a completely different life. As Jon mentioned before, the teams here at Red Gate are small and everyone (including the interns!) is responsible for the product as a whole. I’ve attended planning sessions, UX tests, daily meetings, and everything else a full-time member of the team would; I had as much say in where we would go next with the product as anyone; I was able to see that what I was doing was an important part of the product from the feedback we got in the UX tests. All these things almost made me forget that this is just an internship and not my full-time job. First steps at Red Gate Being based in Cambridge, Red Gate has many Cambridge university graduates working for them. They also hire some Cambridge undergraduates for internships each summer. With its popularity with university graduates and its great working environment, Red Gate has managed to build up a great reputation. When I thought of doing an internship here in Cambridge, Red Gate just seemed to be the obvious choice for my first real work experience. On my first day at Red Gate, David, the lead developer for SSAS Compare, helped me settle in and explained what I’d be doing. My task was to improve the user experience of displaying differences between MDX scripts by syntax highlighting, script formatting, and improving the difference identification in the first place. David suggested how I should approach the problem, but left all the details and design decisions to me. That was when I realised how much independence and responsibility I’d have. What I’ve done If you launch the latest version of SSAS Compare and drill down to an MDX script difference, you can see the changes that have been made. In earlier versions, you could only see the scripts in plain text on both sides — either in black or grey, depending on whether they were the same or not. However, you couldn’t see exactly where the scripts were different, which was especially annoying when the two scripts were large – as they often are. Furthermore, if parts of the two scripts were formatted differently, they seemed to be different but were actually the same, which caused even more confusion and made it difficult to see where the differences were. All these issues have been fixed now. The two scripts are automatically formatted by the tool so that if two things are syntactically equivalent, they look the same – including case differences in keywords! The actual difference is highlighted in grey, which makes them easy to spot. The difference identification has been improved as well, so two scripts aren’t identified as different if there’s just a difference in meaningless whitespace characters, or when you have “select” on one side and “SELECT” on the other. We also have syntax highlighting, which makes it easier to read the scripts. How I did it In order to do the formatting properly, we decided to parse the MDX scripts. After some investigation into parser builders, I decided to go with the GOLD Parser builder and the bsn-goldparser .NET engine. GOLD Parser builder provides a fairly nice GUI to write, build, and test grammar in. We also liked the idea of separating the grammar building from parsing a text. The bsn-goldparser is one of many .NET engines for GOLD, and although it doesn’t support the newest features of GOLD Parser, it has “the ability to map semantic action classes to terminals or reduction rules, so that a completely functional semantic AST can be created directly without intermediate token AST representation, and without the need for glue code.” That makes it much easier for us to change the implementation in our program when we change the grammar. As bsn-goldparser is open source, and I wanted some more features in it, I contributed two new features which have now been merged to the project. Unfortunately, there wasn’t an MDX grammar written for GOLD already, so I had to write it myself. I was referencing MSDN to get the formal grammar specification, but the specification was all over the place, so it wasn’t that easy to implement and find. We’re aware that we don’t yet fully support all valid MDX, so sometimes you’ll just see the MDX script difference displayed the old way. In that case, there is some grammar construct we don’t yet recognise. If you come across something SSAS Compare doesn’t recognise, we’d love to hear about it so we can add it to our grammar. When some MDX script gets parsed, a tree is produced. That tree can then be processed into a list of inlines which deal with the correct formatting and can be outputted to the screen. Doing all this has led me to many new technologies and projects I haven’t worked with before. This was my first experience with C# and Visual Studio, although I have done things in Java before. I have learnt how to unit test with NUnit, how to do dependency injection with Ninject, how to source-control code with SVN and Mercurial, how to build with TeamCity, how to use GOLD, and many other things. What’s coming next Sadly, my internship comes to an end this week, so there will be less development on MDX difference view for a while. But the team is going to work on marking the differences better and making it consistent with difference indication in the top part of comparison window, and will keep adding support for more MDX grammar so you can see the differences easily in every comparison you make. So long! And maybe I’ll see you next summer!

Read the article

Upcoming EMEA, APAC & US Events with MySQL in 2014

- by Lenka Kasparova

As an update to the previous announcement from Mar 25, 2014 please find below the updated list of events where MySQL Community team is attending and/or supporting. This time you can find not only EMEA & APAC ones but also conferences & events we are covering in the US & Canada. You are invited to meet our engineers at the events below. EMEA NEW!! BGOUG, Sandanski, Bulgaria, June 13, 2014 Georgi Kodinov will attend and speak at this local Oracle User Group event. Feel free to come. PHP Tour Lyon, Lyon, France, June 23-24, 2014 MySQL team is going to be part of this show as well, we are not going to have a booth here but very active networking by our french MySQL team around the event. Come to meet us and talk to us! NEW!! Converge Conference, Glasgow, Scotland, August 15-16, 2014 MySQL Community Manager, David Stokes attends with MySQL talk. NEW!! CakeFest, Madrid, Spain, August 21-24, 2014 A talk on "Scaling Your MySQL instances AND keeping your Sanity" will be given by the MySQL Community Manager, David Stokes. Froscon 2014, St.Augustin, Germany, August 23-24, 2014 Please visit our booth as well as watch the Froscon website for the schedule updates. NEW!! SymfonyLive, UK, London, September 25-26, 2014 MySQL Community Magers, David Stokes & Morgan Tocker submitted MySQL talks for this show. Schedule will be announced later on. DrupalCon Amsterdam, The Netherlands, September 29-Oct 3, 2014 Meet us at our booth at DrupalCon Amsterdam. For the schedule please watch the DrupalCon website. All Your Base, Oxford UK, October 17, 2014 Come to visit our MySQL booth and talk to our MySQL experts. NEW!! WebTechCon / IPC, Munich Germany, October 26-29, 2014 NEW!! DOAG, Nuremberg, Germany, November 18-20, 2014 There will be a full day of MySQL talks and one full day of MySQL workshop & sessions with live demo. This event is simply hard to miss! NEW!! Forum PHP Paris, France, November 21-22, 2014 More details: TBD NEW!! UK OUG, Liverpool, UK, December 8-10, 2014 MySQL will be part of the Oracle booth and we hope to get more space for MySQL talks. USA NEW!! Texas Linux Fest, Austin, Texas, US, June 13-14, 2014 NEW!! SouthEast Linux Fest, Charlotte, US, June 20-22, 2014 NEW!! Debian Conference 2014, Portland, OR, US, August 23-31, 2014 NEW!! FossetCon, Orlando, US, September 11-13, 2014 NEW!! Oracle Open World, San Francisco, US, September 29-October 3, 2014 NEW!! MySQL Central @ Open/World, San Francisco, US, September 29-October 3, 2014 NEW!! PyTexas 2014, Dallas, TX, US, October 3-5, 2014 NEW!! All Things Open (replacing POSSCON), Raleigh, NC, October 23-24, 2014 NEW!! Ohio LinuxFest 2014, Columbus, Ohio, US, October 24-25, 2014 NEW!! ZendCon PHP, Santa Clara, US, October 27-30, 2014 NEW!! Kuali Days 2014, Indianapolis, US, November 10-13, 2014 NEW!! Live 360, Orlando, FL, US, November 17-20, 2014 APAC OpenSourceConference Japan, Hokkaido, June 13-14, 2014 MySQL is represented by Ryusuke Kajiyama with the talk on "MySQL Technology Updates". NEW!! db tech showcase, Osaka Japan, June 18-20, 2014 Three MySQL talks are scheduled for this show, "MySQL for Oracle DBA" & "MySQL Technology Updates" by Ryusuke Kajiyama. The last talk will be on MySQL Fabric by Yoshiaki Yamasaki. NEW!! PyCon Singapore, Singapore, June 18-20, 2014 Ryusuke Kajiyama will be talking about "Sharding and scale-out using Python-based MySQL Fabric". NEW!! COSCUP, Taipei, Taiwan, July 19-20, 2014 We are going to run a technical session on MySQL Workbench & one talk on how to make MySQL better MySQL. NEW!! PyCon New Zealand, Wellington, New Zealand, September 13-14, 2014 MySQL talks were submitted as well as one talk by Solaris Modernization team on Python & Solaris, watch the website for schedule updates. NEW!! PyCon Japan, Tokyo Japan, September 13-15, 2014 MySQL will be a MySQL session speaker, no schedule is announced yet. Ruby Kaigi, Tokyo, Japan, September 18-20, 2014 Another event MySQL supports and attends in APAC region. Ruby Kaigi is the international Ruby Conference in Japan, Tokyo. Ruby started in Japan, so Ruby Kaigi has excellent speakers and developers! MySQL team is going to be present at this conference with MySQL talks and active networking around the venue. NEW!! PyCon India, Bangalore, India, September 26-28, 2014 A MySQL talk on "MySQL Utilities scaling MySQL with Python" has been submitted, please watch the PyCon website for the schedule updates. NEW!! OpenSourceConference Japan, Tokyo, October 18-19, 2014 NEW!! OpenSource India, Bengaluru, India, November 7-8, 2014 NEW!! OpenSourceConference Japan, Fukuoka, November 14-15, 2014 You can check the MySQL wikis for updates on the conferences we are attending. Next time I hope to have more details for each event above (especially for the US ones).

Read the article

Windows XP seemingly out of resources but plenty of free RAM and swap available

- by Artem Russakovskii

This one has been bothering me for years and so far I couldn't find an adequate solution. The problem occurs on pretty much every XP install I've done. After opening a variety of programs or the system running existing programs for a while, Windows seemingly runs out of resources, without telling me. There's ALWAYS free RAM. For example, it just happened to me and I had over a gig of free RAM. There are no viruses, spyware, or other nonsense - it is a Windows resource problem, but the question is which resource is it running out of, how does one pinpoint it, and how does one prevent it? Sometimes, this happens after running specific programs - for example, today it happened when I started Photoshop CS4 and Flash CS4 at the same time. I also noticed that restarting The Bat (email client by Ritlabs) seems to get rid of this problem for a while but again, this happens on machines that don't even have The Bat installed. So what does exactly happen? The symptoms are: pressing alt-tab doesn't bring up the list anymore - it just jumps to the next window instantly, very similar to the way Alt-Esc works, however in this case, it's due to not having enough resources to bring up the alt-tab menu random programs would randomly crash, citing random errors, out of memory errors, system resources, inabilities to do system calls, etc. random programs would start missing random parts - for example, Firefox top menus might disappear, pull up partial selections, or not pull up anymore altogether. IE might lose a few of its toolbars. Some programs might fail to redraw or would just plain go gray where the UI used to be. Windows itself never complains about running out of RAM, virtual memory, or anything at all, yet it's running out of something. The only clue I was able to find and apply the fix today was this Desktop Heap Limitation. I haven't confirmed the fix working as not enough time passed. In the meantime, what are everyone's thoughts?

Read the article

How to install Red Hat Enterprise Linux on Apple Macbook Pro MacBookPro4,1

- by Todd V. Rovito

I have a one year old Mac Book Pro that I am trying to get RHEL 5.4 installed on via bootcamp. No matter what I do I can't get the installer to boot. I have tried multiple DVD's and even verified the install works on a new Mac Book Pro. Most of the time the installer simply locks up. I usually use Linux text with all-generic-ide on the boot line. I removed the ide parameter and I just used linux text. The results I get are that a bunch of kernel messages appear then the background turns blue and a thin text box pops up saying its loading ata..... something it disappears too fast for me to read. Then the machine freezes. I pressed the alt function keys to see if I could look at the system log, here is what it says: Alt-f3 says "trying to mount CD device hda" Alt-f4 says status error: hda: lastFailedSense Hda: Failed opcode was: unknown Hda: Lost interrupt Hda: Drive not ready for command Ide-cd: command 0x3 timed out Above this junk it looks like it found the partition because it knew it was 20 GB and listed as /dev/sda3. I think it has something to do with the CD drive, is that possible? Thanks again for the support. PS I posted in the apple support forums ( Apple.com Support Discussions Boot Camp Installation and Storage) and didn't get an answer.

Read the article

Video desktop recording and multiple WM displays, capturing nonactive display

- by okobaka

Two WM running on one local machine. WM - Fluxbox. Using ffmpeg to record desktop. ffmpeg -an -f x11grab -s 1920x1080 -r 25 -i :1.0 -sameq /tmp/video.mkv On one display everything works great, but not when i have another WM display startx -- :1. What i am doing right now is to switch ctrl+alt+f8 to display:1.0, and start recording with ffmpeg. Everything is fine until i switch back ctrl+alt+f7 to display:0.0, WM and captured video image freezes, but when i switch back ctrl+alt+f8 to display:1.0, it unfreeze and continue recording. So, how to make display:1.0 not to freeze, while on display:0.0? Tested some more. open [display 0.0] open [display 0.1] from [display 0.0] = open => [display 0.2] same problem For different users and same users results are the same. ffmpeg keeps recording that paused image. Looks like WM root window need to be active, to be recorded.

Read the article

How do I stop VLC from stealing my volume buttons

- by MGOwen

when I press the volume buttons on my laptop, usually the system volume is changed. However, when I do this with VLC it "steals" the presses and adjusts it's own "volume" instead. The system volume is also changed. I can't find any way to turn this off in VLC. Does anyone know? Update: Sorry, some more details I should have included originally: VLC VERSION: 1.1.4 (and a few previous releases, back to about 1.1.0 or so, I think) OS: Win Vista Pro 32 HARDWARE: Dell 1720 laptop (the volume buttons are little buttons on the front of the unit, they may work something like "media" keyboard volume buttons) Update: The buttons seem to map to Ctrl+Alt+b and Ctrl+Alt+c (according to the shortcut key box in windows shortcut properties) but the VLC advanced preferences hotkeys screen doesn't list these as the keys it uses for volume. I changed it so there are no volume hotkeys in VLC settings - no luck it still steals the presses and adjusts the volume. Also, pressing Ctrl+Alt+b or c doesn't change my system volume, so who knows what windows or VLC are doing to recognise those volume buttons. :(

Read the article

How to install Red Hat Enterprise Linux on Apple Macbook Pro MacBookPro4,1

- by Todd V. Rovito

I have a one year old Mac Book Pro that I am trying to get RHEL 5.4 installed on via bootcamp. No matter what I do I can't get the installer to boot. I have tried multiple DVD's and even verified the install works on a new Mac Book Pro. Most of the time the installer simply locks up. I usually use Linux text with all-generic-ide on the boot line. I removed the ide parameter and I just used linux text. The results I get are that a bunch of kernel messages appear then the background turns blue and a thin text box pops up saying its loading ata..... something it disappears too fast for me to read. Then the machine freezes. I pressed the alt function keys to see if I could look at the system log, here is what it says: Alt-f3 says "trying to mount CD device hda" Alt-f4 says status error: hda: lastFailedSense Hda: Failed opcode was: unknown Hda: Lost interrupt Hda: Drive not ready for command Ide-cd: command 0x3 timed out Above this junk it looks like it found the partition because it knew it was 20 GB and listed as /dev/sda3. I think it has something to do with the CD drive, is that possible? Thanks again for the support. PS I posted in the apple support forums ( Apple.com Support Discussions Boot Camp Installation and Storage) and didn't get an answer.

Read the article

Is there a remote desktop or vnc app for the IPad that properly handles Bluetooth keyboard shortcuts?

- by Steve Bison

I've tried 4 or 5 remote desktop apps, the most notable being Jump Desktop and Splashtop Streamer. Most of these remote desktop apps have some sort of on-screen keyboard for typing with the IPad, including special keys like shift, control, alt. The special keys act like "sticky keys" meaning they stay depressed until another key is pressed, to make it easier to do key combinations. Even non-standard keyboard combinations like shift+enter work, in this sticky sense. When using a Bluetooth keyboard with the remote desktop apps, both Jump and Splashtop Streamer recognize the shift + letter combination for doing capital letters. However, generically pressing shift, cntrl, or alt does not depress the sticky on screen shift buttons or do anything at all. Only a few combinations are recognized (again like shift+letter, cntrl+C). Most combinations do not work (shift+enter, alt+tab). Even having the keyboard shortcuts work like sticky keys (press shift then enter, not both at once) would be much better than the limited functionality they have now. Is there an app, jailbreak app, or workaround that lets me use bluetooth keyboard properly with remote desktop on the ipad?

Read the article

Window too big to fit the screen!

- by syockit

I'm using Windows 7 on a 8.9' monitor with 1280x768 screen resolution. Using the might of arithmetics, I'm able to determine that my dpi (actually ppi) should be 167. Win7 is really helpful in that it doesn't have to restart to apply new dpi settings, unlike its predecessors (though I'd rather it applies straight away). The problem with small monitors in Windows is that when you come across windows too big to fit the screen, you can't move the title bar far above it. In X window managers I used in the past, you could alt-drag the window to anywhere you want, but in Windows, even if you alt-space and select move, it will automatically push the window back until the title bar is visible. I'm looking for a solution that either: allows me to move window freely without regard to titlebar visibility, or attach a scrollbar to existing window, or EDIT: create virtual desktops that allow me to span windows over 2 desktops, or EDIT 2: allow me to set larger virtual resolution, then pan & scan. EDIT 3: I found some progs that might do some of the above: 1) AltDrag allows me to drag, resize using alt and left/right mouse button. Neat! Best solution so far. 2) GiMeSpace Desktop Extender is supposed to allow me to scroll desktop. Didn't work. The other new version, GiMeSpace Ultimate Taskbar worked, but it destroys my Superbar, replacing it with its map.

Read the article

Ubuntu problem - monitor out of range

- by Kelp

Hello, I am using an external monitor for my laptop to run Ubuntu with. I just updated Ubuntu today, but when it is about to reach the Ubuntu login screen, then the monitor says "out of range." Now, Ubuntu boots up into the GUI if I unplug my monitor and use my laptop screen, but I prefer to use the external display. I have tried all of the suggestions from my search results in Google. I tried pressing Ctrl + Alt + +, but nothing happens. I tried pressing Ctrl + Alt + -, but nothing happens. I used Ctrl + Alt + F2 to get into a terminal to run the command: sudo dpkg-reconfigure xserver-xorg, but nothing happens. I believe there are supposed to be options to change the settings, but it does not even give me any. I tried to edit /etc/usplash.conf and /nano/etc/usplash.conf, but they do not exist. I did sudo apt-get update and sudo apt-get upgrade hoping that it would install drivers or something to help my situation, but they did not help. My monitor is a Westinghouse 22" LCD with resolution 1680x1050. It has been working for the past few months until I updated it today.

Read the article

ASP.NET make a panel visible on click of hyperlink (whilst also cuasing postback for page navigation

- by Helen

I may be asking the impossible but let me set out my problem: I have a menu in a MasterPage which uses images and mouseover mouseout events for design purposes. On one of the menu options I need to display a set of sub menus options on the click of the parent menu item. The menu item itself also needs to navigate to a specified url. I was originally trying to use an AJAX accordion panel but as I only had one accordion panel it was always displaying the sub menu items and was not collapsing. I have also tried putting the options in a div and setting the display via javascript. This worked but then was overwritten once the page navigation postback occurred. Here is the source: <%@ Master Language="VB" CodeFile="MasterPage.master.vb" Inherits="MasterPage" %> <%@ Register Assembly="AjaxControlToolkit" Namespace="AjaxControlToolkit" TagPrefix="cc1" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <%@ Register Src="LeadHeader.ascx" TagName="LeadHeader" TagPrefix="uc1" %> <%@ Register Src="~/LeadFooter.ascx" TagName="LeadFooter" TagPrefix="uc2" %> <html xmlns="http://www.w3.org/1999/xhtml"> <head runat="server"> <link href="StyleSheet.css" rel="stylesheet" type="text/css" /> <script type="text/javascript"> var revert = new Array(); var inames = new Array('home', 'whoweare', 'whatwedo','ourapproach', 'ourvalues', 'contact'); // Preload if (document.images) { var flipped = new Array(); for(i=0; i< inames.length; i++) { flipped[i] = new Image(); flipped[i].src = "images/"+inames[i]+"2.jpg"; } } function over(num) { if(document.images) { revert[num] = document.images[inames[num]].src; document.images[inames[num]].src = flipped[num].src; } } function out(num) { if(document.images) document.images[inames[num]].src = revert[num]; } function ShowHide(elementId) { var element = document.getElementById(elementId); if(element.style.display != "block") { element.style.display = "block"; } else { element.style.display = "none"; } } function UpdateText(element) { if(element.innerHTML.indexOf("Show") != -1) { element.innerHTML = "Hide Details"; } else { element.innerHTML = "Show Details"; } } </script> </head> <body> <form id="form1" runat="server"> <div> <asp:ContentPlaceHolder ID="ContentPlaceHolder2" runat="server"> <uc1:LeadHeader ID="LeadHeader" runat="server" /> </asp:ContentPlaceHolder> <div id="nav"> <div class="menu-item"> <a href="Default.aspx"> <img src="Images/home.jpg" alt="home" id="home" onmouseover="over(0)" onmouseout="out(0)" class="right" /></a> </div> <div class="menu-item"> <a href="AboutUs.aspx"> <img src="Images/whoweare.jpg" alt="who we are" id="whoweare" onmouseover="over(1)" onmouseout="out(1)" class="right" /></a> </div> <%-- <asp:ScriptManager ID="ScriptManager1" runat="server"> </asp:ScriptManager> <cc1:Accordion ID="Accordion1" runat="server" AutoSize="None" FadeTransitions="true" TransitionDuration="350" FramesPerSecond="40" RequireOpenedPane="false" > <Panes> <cc1:AccordionPane runat="server"> <Header>--%> <div class="menu-item"> <a href="WhatWeDo.aspx"> <img src="Images/whatwedo.jpg" alt="what we do" id="whatwedo" onmouseover="over(2)" onmouseout="out(2)" class="right" onclick="ShowHide('divDetails');UpdateText(this);" /></a></div> <%--/Header> <Content>--%> <div id="divDetails" style="display:none;"> <a href="management.aspx" title="Management Development">Management Development</a><br /> <a href="leadership.aspx" title="Leadership Development">Leadership Development</a><br /> <a href="personal.aspx" title="Personal Development">Personal Development</a><br /> <a href="realteams.aspx" title="Team Building / Facilitation">Team Building & Facilitation</a><br /> <a href="coaching.aspx" title="Coaching">One to One Coaching</a> </div> <%-- </Content> </cc1:AccordionPane> </Panes> </cc1:Accordion> --%> <div class="menu-item"> <a href="OurApproach.aspx"> <img src="images/ourapproach.jpg" alt="our approach" id="ourapproach" onmouseover="over(3)" onmouseout="out(3)" /></a> </div> <div class="menu-item"> <a href="OurValues.aspx"> <img src="images/ourvalues.jpg" alt="our values" id="ourvalues" onmouseover="over(4)" onmouseout="out(4)" /></a> </div> <div class="menu-item"> <a href="ContactUs.aspx"> <img src="images/ContactUs.jpg" alt="contact us" id="contactus" onmouseover="over(5)" onmouseout="out(5)" /></a> </div> </div> <asp:ContentPlaceHolder ID="ContentPlaceHolder1" runat="server"> </asp:ContentPlaceHolder> <asp:ContentPlaceHolder ID="ContentPlaceHolder3" runat="server"> <uc2:LeadFooter ID="LeadFooter" runat="server" /> </asp:ContentPlaceHolder> </div> </form> </body> </html>

Search Results

Search found 6752 results on 271 pages for 'david alt'.

Page 56/271 | < Previous Page | 52 53 54 55 56 57 58 59 60 61 62 63 | Next Page >

- by Skizz

- by DotNetStudent

- by Mickeysofine

- by Nil

- by adjfac

- by webid4me

- by user1870691

- by user104731

- by frozenkoi

- by user3624023

- by torpesco

- by user2697032

- by David McPaul

- by Red Gate Software BI Tools Team

- by Lenka Kasparova

- by Artem Russakovskii

- by Todd V. Rovito

- by okobaka

- by MGOwen

- by Todd V. Rovito

- by Steve Bison

- by syockit

- by Kelp

- by Helen

< Previous Page | 52 53 54 55 56 57 58 59 60 61 62 63 | Next Page >