Search Results

Search found 4244 results on 170 pages for 'nocturnal thoughts'.

Page 56/170 | < Previous Page | 52 53 54 55 56 57 58 59 60 61 62 63  | Next Page >

• Linux IPv6: DHCP and /127 prefixes

  - by Jeff Ferland

  I've tried multiple pieces of DHCP client and software in attempting to setup a solution for allocating a /127 prefix to virtual machines so that each maintains its own layer 2 isolation. Because there would only be one host assigned to each network, a /64 is impractical. While the prefix size could reasonably be somewhere in the /64-127 range, the crux of the problem has been the same regardless of the software used in configuring: the DHCP call to bring up the interface uses the address advertised by DHCPv6 and inserts two routes: the /127 given by the router advertising packets and a /64 as well. Any thoughts on why I'm getting the additional route added across dhcp client vendors?

  Read the article

• TCP/IP performance tuning under KVM/Qemu

  - by vpetersson

  With more and more companies switching to public cloud services, I'm curious what you guys' thoughts are on TCP/IP tuning in the cloud. Is it worth bothering with? Given that you don't have access to the host-server, you're somewhat limited I presume Let's say for the sake of the argument that you're running three MongoDB-servers in a replica-set on FreeBSD or Linux that all sync over an internal network. I'd also be curious if anyone made any actual performance benchmarks to back up their arguments. I benchmarked the various network drivers available for KVM/Qemu here, but I'm curious what the gurus here suggest to tune further. I started playing around a bit with the tuning-recommendations as suggested over here, but interestingly enough I saw a decrease in performance, rather than an increase, but perhaps I didn't fully understand the tweaks. Update: I did a few more benchmarks and posted the result here. Unfortunately the result wasn't really what I expected.

  Read the article

• How to best config my PC. 2 small SDDs and a 1TB conventional drive

  - by Chadworthington

  I just got a new PC. It has 3 drives C Drive: 80GB SDD Drive P Drive: 120GB SDD (for core programs) D Drive: 1TB SDD (for data and other) I have an MSDN subscription and I am the type of person that loves to install tons of software to check it out. I am very worried that installation programs are forcing me to place a large amount of files on the small C drive. I fear that I will quickly run out of space on my C drive while having ample space on my TB drive. What would you do in my shoes? I didn't select this PC or set the config up. I am wishing that the 120 SSD was my C, to give me a little more room to grow. I guess there are no magic solutions here but I am just looking for your general thoughts

  Read the article

• SSL Certificates, two-way authentication and loadbalancers

  - by 5arx

  We're looking to implement two-way authentication with client certificates for a privileged subset of our application users. The idea will be that if a certificate is detected the user will be asked for an additional password/PIN and that will be used to verify the certificate and user. Ordinary users will continue to authenticate themselves via the standard login mechanism. Our production environment (hosted by a well-known company) comprises load-balanced application servers and I'm unclear as to how this set-up will handle the certificates and I'm not certain if there are any pitfalls I should be aware of. I would very appreciate some thoughts, comments or real-world advice on the subject.

  Read the article

• Why would http & https be blocked, even in safe mode with firewall disabled?

  - by Cogwheel

  I have a windows 7 machine (dell studio xps). Everything on it seems to be in working order. The network device says it has internet connectivity, and indeed I can ping websites, transfer files via ftp, connect to vpns and remote desktop, but the web won't work. I've disabled the windows firewall and still no go. There are no other firewalls installed. The computer came with a trial of norton 360 so I also used the norton removal tool (which solved a similar problem on another computer for me previously). Any thoughts?

  Read the article

• Cannot connect to telnet server

  - by BloodPhilia

  So, I can't use telnet to connect to any server but it works fine from a different computer. It just says it can't connect. I tried the following things: Disable firewall and AV protection. (Basically, there was no security feature left online) Telnet is set to "Trusted" in my AV protection. (Kaspersky Internet Security 2011) Using Putty to telnet, but apparently Putty's connection is also inhibited. (Says it can't connect to host) Disabling the telnet client in Control Panel and then re-enabling it. (Windows 7 Ultimate) hosts file is clean. Checked for nasties using MBAM and KIS 2011 as well as going though my HijackThis logs, nothing found. I can connect to the same machines/servers through the web browser, ping, tracert, etc. Only telnet seems to be blocked. Any other thoughts?

  Read the article

• information about /proc/pid/sched

  - by redeye

  Not sure this is the right place for this question, but here goes: I'm trying to make some sense of the /proc/pid/sched and /proc/pid/task/tid/sched files for a highly threaded server process, however I was not able to find a good explanation of how to interpret this file ( just a few bits here: http://knol.google.com/k/linux-performance-tuning-and-measurement# ) . I assume this entry in procfs is related to newer versions of the kernel that run with the CFS scheduler? CentOS distro running on a 2.6.24.7-149.el5rt kernel version with preempt rt patch. Any thoughts?

  Read the article

• Kaspersky processing error Explorer.exe (recycle bin)

  - by aeternus828

  I get daily critical errors from Kaspersky involving Explorer.exe... The file in question is almost always in the Recycle Bin, or something on the desktop. Here is an example error detail: Event type: Processing error Application\Name: EXPLORER.EXE Application\Path: C:\WINDOWS\ Application\Process ID: 2364 Application\Options: C:\windows\Explorer.EXE Component: File Anti-Virus Result\Description: Processing error Object: C:\$Recycle.Bin\S-1-5-21-1403139956-787289773-2644151291-500\$RIKKQKS Object\Type: File Object\Path: C:\$Recycle.Bin\S-1-5-21-1403139956-787289773-2644151291-500\ Object\Name: $RIKKQKS Reason: Read error Google searches didn't offer much insight, so I thought I'd ask here if anyone has encountered a similar situation. Not sure if it's a bug, something to be concerned about, or an easy fix, etc. I usually just empty the recycle bin for a temporary fix, but would like to get to the root of the error. Thoughts?

  Read the article

• Cannot connect to telnet server

  - by BloodPhilia

  So, I can't use telnet to connect to any server but it works fine from a different computer. It just says it can't connect. I tried the following things: Disable firewall and AV protection. (Basically, there was no security feature left online) Telnet is set to "Trusted" in my AV protection. (Kaspersky Internet Security 2011) Using Putty to telnet, but apparently Putty's connection is also inhibited. (Says it can't connect to host) Disabling the telnet client in Control Panel and then re-enabling it. (Windows 7 Ultimate) hosts file is clean. Checked for nasties using MBAM and KIS 2011 as well as going though my HijackThis logs, nothing found. I can connect to the same machines/servers through the web browser, ping, tracert, etc. Only telnet seems to be blocked. Any other thoughts?

  Read the article

• Fastest web server for serving static content

  - by Swader

  Hello, I'm optimizing our system for some faster static content delivery, and was wondering if anyone has any proper experience with the fastest web servers out there for such a purpose. From the three main candidates I've considered, Nginx, Cherokee and Lighttpd, each seems to have its own problems - but the reports I've read online are somewhat biased and lean towards whichever server the user is currently using. Any ideas on where to see a proper benchmark for this specific purpose, or at least a non-biased list of pros and cons? Any personal experiences and pitfalls I should be vary of? Thanks Edit: Serverfault.com gave the answer as nginx. I'd still like to hear some developer thoughts from this end of the universe.

  Read the article

• How to bulk mail-enable contacts from AD in Exchange 2007?

  - by George Hewitt

  Hello, We have several thousand 'contacts' setup in AD already for a faxing system. We're migrating to an online fax provider that uses e-mail rather than plain old telephone. So, we've bulk edited all the AD records so that the 'mail' attribute is populated with the right e-mail address in the right format. Now, how do we enable these contacts within Exchange 2007? I've looked through http://technet.microsoft.com/en-us/library/bb684891.aspx but that only seems to talk about manually editing the CSV output to specify the external addresses. AD already knows the external e-mail addresses - I just need the info in Exchange! Any thoughts?

  Read the article

• Best practice for scaling a single application source to multiple nodes

  - by Andrew Waters

  I have an application which needs to scale horizontally to cover web and service nodes (at the moment they're all on one) but interact with the same set of databases and source files (both application code and custom assets). Database is no problem, it's handled already with replication in MongoDB. Also, the configuration of the servers are the same (100% linux). This question is literally about sharing a filesystem between machines so that its content is always correct, regardless of the node accessing it. My two thoughts have so far been NFS and SAN - SAN being prohibitively expensive and NFS seeing some performance issues on the second node with regards to glob()ing in PHP. Does anyone have recommended strategies or other techniques that don't involved sharding data across nodes or any potential gotchas in NFS that may cause slow disk seek times? To give you an idea of the scale, the main node initialises it's application modules in ~ 0.01 seconds. The secondary is taking ~2.2 seconds. They're VM's inside a local virtual network in ESXi and ping time between them is ~0.3ms

  Read the article

• Dial-in VPN Routing issue when on 192.168.x.x network range

  - by Ian

  I'm not an expert on networks but have a small office on the 192.168.x.x. range which is managed by a vigor (2800) router. I have enabled the VPN dial-in option on the router so I can get to the server on 192.168.1.100 which works fine from my macbook when i'm NOT on a local network with that is on the 192.168.x.x range. e.g. works fine when I tether over my Android smartphone but when I try & connect when on my home network, it connects, I can access the router (192.168.1.1) but cannot access 192.168.1.100 - traceroute doesn't hop via 192.168.1.1 I have enabled "send all traffic over VPN connection but again, not joy... Feels like the osx platform isn't routing the traffic out to the vpn endpoint as the destination address is on the local subnet but expect it would be. This work fine on a windows PC on the same home network. Any thoughts on what the issue could be?

  Read the article

• Using terminal vs KDE in linux?

  - by Ke

  Im used to using nautilus within centos but have recently just got a VPS and quickly realising that using a KDE is unacceptable in this environment. Although I do find it so much quicker doing things like folder permissions in KDE rather than typing it all out in the terminal? Everyone I speak to says, use the terminal and I should learn this way as opposed to using the KDE, but theres certain things I just dont get How is it possible to make quick changes to scripts and viewing them in a browser etc , without a mouse or using KDE? and only using a terminal?? I am wondering how to develop websites just using the terminal??? How can it be quicker to type out/view permissions etc in the terminal when its instant and just a few clicks in the KDE? Any thoughts are much appreciated. I would love to understand the benefits but just cant seem to see them right now. Cheers Ke.

  Read the article

• Are VLANs necessary for my environment?

  - by kleefaj

  Greetings. I'm the new network manager for a school. I've inherited an environment made up of several Windows servers, about 100 Windows clients, ten printers, one Cisco router, six Cisco switches, and 1 HP switch. Also, we're using VoIP. There are four floors in our building. The hosts on each floor are assigned to a separate VLAN. An office on the first floor has its own VLAN. All the switches are on their own VLAN. The IP phones are on their own VLAN. And the servers are on their own VLAN. For the number of hosts on the network, are all these VLANs really buying me anything? I'm new to the VLAN concept but it seems overly complicated for this environment. Or it's genius and I just don't get it. Any thoughts? Thanks, Jeff

  Read the article

• Can the expect utility handle a case where the process it spawns also spawns a sub process?

  - by davidparks21

  I'm trying to use expect to handle rsync over an ssh shell, but it gets stuck. If I run my rsync command it works (simplified here): It prompts me for my password and copies files to the server: rsync -e ssh -<other_params> If I then enclose that in expect: expect -d -c "spawn rsync -e ssh -<other_params>" -c "expect password:" -c "send mypass\r" It does not execute properly, the program exists and no files are copied. Even the debug mode isn't giving many clues. My best guess is that rsync is spawning the ssh process, and the ssh process is what needs to be interacted with, but send is picking up the rsync process id and sending the input there. Any thoughts?

  Read the article

• How do I properly check if a program is a virus/trojan in VMware?

  - by acidzombie24

  How I should check if a program is a virus in VMware? Some programs I do need admin ability to install and it makes sense. But how do I know if it's doing more than I want? Some thoughts are: How many processes open when I launch the application What is added to the startup tab in msconfig If any services are added. That's pretty much all my ideas. Even if it does something I recognize I wouldn't know if it's necessary or not. What are some rule of thumb? -Edit- What about registries, can I use that information to help? Maybe have a scanner tell me if the application I just used has messed with sections (like bootup) it shouldn't have?

  Read the article

• Is SmoothWall a good firewall alternative?

  - by Oden

  I found this linux distribution, called SmoothWall. I read its documentation and it looks pretty for me. The only problem is, that I'm not a big linux professional and I have also not a lot of experience but I want to know your thoughts about this "Firewall OS"! Can it be used for small-business environment, with 15-17 PC-s? I would use the server also as cache proxy. Is this a good idea? (I mean, using one server for two things)

  Read the article

• Slow website load with CNAME, fast when using IP

  - by Nate Strandberg

  I setup two DNS servers on my network: ns1.byte-werx.com && ns2.byte-werx.com I can ping the DNS servers and get a fairly good response time, when I dig them I also get a fairly reasonable response, but any website I filter through them is painfully slow (an upwards of 20+ seconds) -- verifiable by performing a tracert or attempting to access the URL in a browser. The DNS servers are running CentOS 6.3 and BIND9 with 500MB of memory (I figure that should be more than enough?). I have a reverse look-up zone (1.168.192) along with two website zones (www.byte-werx.com and www.stayhomedental.com) If I access the websites using their IP the page loads nearly instantly so I do not believe the issue is with the hosting server, but that is running Ubuntu Server 12.04 and Apache2 with 12GB memory. Any thoughts? I do not have the named.conf file in front of me but I can edit this post to include it if you feel it would be useful. Thanks for any advice!

  Read the article

• Mount "Macrium Reflect" on a partition, boot from there?

  - by b e

  Can Macrium's Reflect recovery CD be mounted/used with GRUB ? If the cd can be 'put' (loaded/mounted/...) in a partition, then the only disc needed would be the actual recovery disc, which could be on an external hard drive, or even on the same machine in another partition, thus allowing on to recover using only what's on the machine itself. I have WXPpro and Xubuntu8.04 double mounted, really happy with them together, use each right now to fix problems with the other when they come up. Also have a partition for the Reflect CD, but I just can't get it to load from Grub, which would be great... Thanks for any thoughts, probably someone has already done this I know !

  Read the article

• Please help to troubleshoot the issue with Inspiron 8600 laptop

  - by user34300

  Hello! I have a Dell Inspiron 8600 laptop which display stopped working all of the sudden. It started to show a purple fog pattern along with some color vertical lines. I talked to Dell support and they told me that is a screen gone bad and I should get a new one which I did. But surprisingly the new display won't work either! The pattern on the screen is different but still no picture. So I tried to connect the old display to another laptop (Lenovo Z61) and it turns out it works just fine with it! So please help me to identify the cause of the issue. I think it could be a video card but the external display works flawlessly. I appreciate your thoughts about it so I won't need to buy spares which I don't need. Thank you! P.S. Please do not suggest to contact Dell support again.

  Read the article

• Feedback on available mid-to-enterprise level desktop backup solutions [closed]

  - by user85610

  I am involved in the creation of a new backup solution to replace our current Retrospect setup, which has become a significant time sink to administer. We have almost 200 desktop and some laptop clients, both Windows and OS X. We're only interested in products oriented around disk-to-disk, and would be integrate well with our current set of nine NAS devices as target storage. I'd just like some feedback from anyone out there, as it's sometimes difficult otherwise to find objective reviews of software at this level. Both data and time are important enough that we need a reliable solution which won't be prone to self-destruction as often as Retrospect. Bonus points for de-duplication, which might help squeeze more service time out of our NAS setup in terms of capacity. Currently considering Commvault and Netbackup. Many other products I've seen don't have an OSX client. Any thoughts?

  Read the article

• PDF to HTML - batch converter - most reliable and accurate free AND paid for software?

  - by Rob

  I'm look for either a free or paid-for (about 50$/40pounds) BATCH PDF to HTML converter to convert several PDF files at once. Needs to be able to handle vectored and bitmap images within the file, outputting both as jpegs referenced by the html pages. I've tried iorigsoft paid-for PDF to HTML - problems it seems to hang or just go idle, and the stuff it actually converts have broken links - the wrong name is used for constituent chapters as html. Also tried application from intrapdf.com but this crashes near the beginning of the conversion, consitently. Looked at opensource tools but they look equally flakey or use old PDF versions. Need it on Windows 7 32bit home. Thoughts?

  Read the article

• Google Analytics unexplained spike

  - by Dianne

  My client's Google Analytics has had a spike everyday from May 6th (from 0 - 100.) This is in a city that he is not optimized for and does very little business in. The hits are coming in direct to the website. My client is concerned that it has something to do with competition using his site as a price shopping device. I can't view the ip to see where they are coming from and his site is not built in PHP so the work around doesn't work here. Any thoughts? Could it be a "referring site" situation and if so is there a way for me to find out what the referring site is?

  Read the article

• Why does a Remote Desktop Redirected Printer Doc appear every time I connect to Windows Server 2003 SBS?

  - by Jim Dagg

  I've run into a weird, persistent issue regarding a remote desktop connection. Every time I successfully log into a server running Windows Server 2003 SBS, without taking any further action, after a few seconds a print job spontaneously appears on my machine, titled "Remote Desktop Redirected Printer Doc". The document is 4K, datatype RAW, processor "WinPrint". I've heard of people running into this issue before, but can't seem to hunt down a coherent solution. It's a minor annoyance, but I get annoyed when Windows complains about a print job that, as far as I know, came from nowhere. Any thoughts on why this would occur and how I could prevent it from happening?

  Read the article

< Previous Page | 52 53 54 55 56 57 58 59 60 61 62 63  | Next Page >