Search Results

Search found 2301 results on 93 pages for 'schrodingers cat'.

Page 56/93 | < Previous Page | 52 53 54 55 56 57 58 59 60 61 62 63  | Next Page >

  • Ubuntu sound volume is 40% lower than in Windows

    - by ncomx
    I have 2x 2.1 speakers connected to the computer where I have Ubuntu 12.04 installed. On the software side I've set all the volume controls to 100% with the alsamixer program. The speakers have their own volume control, maintaining those at the same level, and switching between Ubuntu and Windows (XP and 7), on windows the output volume is at least 40% higher, even when having the windows volume control at 50% (without touching the speakers volume control) it's still much higher than the sound on Ubuntu. Why can this be happening? Are there some alternative sound drivers (other than the default ones) I could test to see if it makes a difference? some info about the card: root:$ cat /proc/asound/cards 0 [PCH ]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0xfbff4000 irq 55 1 [Generic ]: HDA-Intel - HD-Audio Generic HD-Audio Generic at 0xfbcfc000 irq 56 root:$ lspci | grep -i audio 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) 02:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Cayman/Antilles HDMI Audio [Radeon HD 6900 Series] I think the one i am using is the Intel one, the other seems to be from the vga card which is an ati radeon 6950. Running gstreamer-properties and switching between alsa, oss, ossv4 and pulseaudio doesn't seem to make any difference.

    Read the article

  • Audio comes out of both headphone and speaker at the same time.. Ubuntu 12.04LTS [closed]

    - by pst007x
    I have the same issue on an Aspire. Ubuntu 12.04LTS 64bit realtek audio sound chip onboard If I plug in a headset, audio does not switch from internal speaker to headset, instead plays out of both at the same time. I have looked at the alsamixer setting, all on. I installed gnome-alsamixer, and I noticed headphone was ticked, if I untick the main audio mutes, and the headphone no longer works. Headset only works with internal speaker. Audio works fine on my other desktop and laptop running this release 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) salvatore@salvatore-Aspire-7730:~$ cat /proc/asound/version Advanced Linux Sound Architecture Driver Version 1.0.24. salvatore@salvatore-Aspire-7730:~$ head -n 1 /proc/asound/card*/codec#* ==> /proc/asound/card0/codec#0 <== Codec: Realtek ALC888 ==> /proc/asound/card0/codec#1 <== Codec: LSI ID 1040 ==> /proc/asound/card0/codec#2 <== Codec: Intel Cantiga HDMI salvatore@salvatore-Aspire-7730:~$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: ALC888 Analog [ALC888 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 1: ALC888 Digital [ALC888 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 salvatore@salvatore-Aspire-7730:~$ uname -a Linux salvatore-Aspire-7730 3.2.0-23-generic #36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux salvatore@salvatore-Aspire-7730:~$ The alsa-base.conf does not exist Tried this: sudo apt-get remove --purge alsa-base sudo apt-get remove --purge pulseaudio sudo apt-get install alsa-base sudo apt-get install pulseaudio sudo alsa force-reload Then: sudo apt-get purge pulseaudio gstreamer0.10-pulseaudio sudo apt-get install pulseaudio gstreamer0.10-pulseaudio indicator-sound Tred this. sudo gedit Then open terminal: sudo /etc/modprobe.d/alsa-base.conf At the end of the file add a new line: options snd-hda-intel model=generic Save and then reboot But alsa-base.conf does not exist

    Read the article

  • OpenGL + Allegro. Moving from software drawing X Y to openGL is confusing

    - by Aaron
    Having a fair bit of trouble. I'm used to Allegro and drawing sprites on a bitmap buffer at X Y coords. Now I've started a test project with OpenGL and its weird. Basically, as far as I know, theirs many ways to draw stuff in OpenGL. At the moment, I think I'm creating a Quad? Whatever that is, and I think Ive given it a texture of a bitmap and them im drawing that: GLuint gl_image; bitmap = load_bitmap("cat.bmp", NULL); gl_image = allegro_gl_make_texture_ex(AGL_TEXTURE_MASKED, bitmap, GL_RGBA); glBindTexture(GL_TEXTURE_2D, gl_image); glBegin(GL_QUADS); glColor4ub(255, 255, 255, 255); glTexCoord2f(0, 0); glVertex3f(-0.5, 0.5, 0); glTexCoord2f(1, 0); glVertex3f(0.5, 0.5, 0); glTexCoord2f(1, 1); glVertex3f(0.5, -0.5, 0); glTexCoord2f(0, 1); glVertex3f(-0.5, -0.5, 0); glEnd(); So yeah. So I got a few questions: Is this the best way of drawing a sprite? Is it suitable? The big question: Can anyone help / Does anyone know any tutorials on this weird coordinate thing? If it even is that. It's vastly different from XY, but I want to learn it. I was thinking maybe I could learn how this weird positioning stuff works, and then write a function to try and translate it to X and Y coords. Thats about it. I'm still trying to figure it all out on my own but any contributions you guys can make would be greatly appreciated =D Thanks!

    Read the article

  • 12.10 no audio via hdmi and video speeds up

    - by jackson
    I have a laptop with an ati radeon 4200, on 12.04 everything worked fine, since upgrading to 12.10 I cannot get sound over the hdmi. When I switch to hdmi audio the video speeds up to about 2x. I can use the speakers in my laptop and watch video via hdmi with no problems. Things I have tried: Various tutorials to install the AMD/ATI drivers, all of which resulted in low graphics mode. Checked that everything is properly set in alsamixer, the sound utility and - installed pavucontrol and checked everything in there. Verified the output from cat /proc/asound/cards looks normal When I initially upgraded there was a plethora of problems which I believe were due to the old proprietary driver still being used but not compatible, after a few hours trying to fix that I decided just to back up and do a fresh install which works great except for the above stated problem. Any help would be greatly appreciated!! Finally hopefully this hasn't already been answered, I have tried a few different searches on the boards and haven't come up with anything. $ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: SB [HDA ATI SB], device 0: ALC269VB Analog [ALC269VB Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0] Subdevices: 0/1 Subdevice #0: subdevice #0

    Read the article

  • M-Audio Delta starts up at wrong sample rate

    - by steevc
    When the PC starts my M-Audio Delta 66 is using 48000kHz sampling rate when it is set for 44100 in Envy24. This causes audio to play slower than it should. This is in Kubuntu 14.04 on my new PC using an AMD A8 6500 with 8GB. When I first installed it seemed okay, but at some point it went wrong and has been doing this consistently since then. Kernel is 3.13.0-24-generic #47-Ubuntu SMP Fri May 2 23:31:42 UTC 2014 i686 athlon i686 GNU/Linux steve@slarti:~$ cat /proc/asound/card2/pcm0p/sub0/hw_params access: MMAP_INTERLEAVED format: S32_LE subformat: STD channels: 10 rate: 48000 (48000/1) period_size: 441 buffer_size: 3528 I can get it to switch to 44100 if I disable/enable the Delta in Pulseaudio volume control, but I have to do this every day and the sound still seems distorted. I can't see any issues in any of the config or log files I can find. If I boot the PC with a Mint Live USB it starts at 44100 and sound fine. Originally reported on Youtube is playing at the wrong speed - maybe soundcard related, but I'll close that and have this more relevant question instead.

    Read the article

  • Why is apt-cache so slow?

    - by Damn Terminal
    After upgrade to Trusty (14.04) from Saucy (13.10), all apt operations are very slow. Even those that do not include downloading anything, or connecting to any servers. For example, displaying the apt policy # time apt-cache policy [...] real 0m8.951s user 0m5.069s sys 0m3.861s takes almost ten seconds! Mostly a weird lag right after issuing the command. And it's the same even if I issue the same command again. On another system it doesn't take a tenth of a second real 0m0.096s user 0m0.070s sys 0m0.023s The other system is a little beefier but there was no noticeable difference before the upgrade. It's the same with apt-get, anything apt-related. How do I find out the source of this lag and fix it? Additional info: # cat /etc/nsswitch.conf # /etc/nsswitch.conf # # Example configuration of GNU Name Service Switch functionality. # If you have the `glibc-doc-reference' and `info' packages installed, try: # `info libc "Name Service Switch"' for information about this file. passwd: compat group: compat shadow: compat hosts: files dns networks: files protocols: db files services: db files ethers: db files rpc: db files netgroup: nis BTW is my understanding of how apt-cache works correct? It doesn't make any network connections when I run apt-cache policy, right? In case I'm wrong and it matters, here are my sources https://gist.github.com/anonymous/02920270ff68e23fc3ec

    Read the article

  • Cryptswap not mounted?

    - by woody
    I believe i have my swap set up but am not sure because on start up it says that it is something along the lines of "could not mount /dev/mapper/cryptswap1 M for manual S for skip". But it appears to be mounted. When i run free -m the output is: total used free shared buffers cached Mem: 3887 769 3117 0 54 348 -/+ buffers/cache: 366 3520 Swap: 4026 0 4026 and sudo bklid is: /dev/sda1: UUID="9fb3ccd6-3732-4989-bfa4-e943a09f1153" TYPE="ext4" /dev/mapper/cryptswap1: UUID="bd9fe154-8621-48b3-95d2-ae5c91f373fd" TYPE="swap" and cat /etc/crypttab is: cryptswap1 /dev/sda5 /dev/urandom swap,cipher=aes-cbc-essiv:sha256 my /etc/fstab is: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda1 during installation UUID=9fb3ccd6-3732-4989-bfa4-e943a09f1153 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation #UUID=bb0e378e-8742-435a-beda-ae7788a7c1b0 none swap sw 0 0 /dev/mapper/cryptswap1 none swap sw 0 0 The file /etc/polkit-1/localauthority/50-local.d/com.ubuntu.enable-hibernate.pkla already exists and its contents are: [Re-enable hibernate by default] Identity=unix-user:* Action=org.freedesktop.upower.hibernate ResultActive=yes Is my swap not setup correctly or is it not mounting?

    Read the article

  • How can find out the device Id of my unmounted DVD?

    - by fred.bear
    When I put a DVD into the DVD drive, it appears in Nautilus Places, but is not automatically mounted. (this is by personal choice). In this unmounted state, mount (of course) reports nothing, and likewise for df.. but Nautilus is aware of the DVD hardware unit and has read the Label; which it shows in Places So it seems to me that Nautilus has already accessed the DVD devices (Did it temporarily mount it?)... The main point of my question was to determine how to find the device Id of an unmounted device .. but as I've been writing this, I now think it may not be as simple as that... This issue came up because I wanted to test this command cat iso-pieces.* | growisofs -Z /dev/dvd=/dev/stdin, but then realized that I didn't know how to get my DVD's device Id. ... and does the above command requires a mounted device, or does it write directly to the device? ... as you can see, I'm a bit vague about devices :) Come to think of it maybe Nautalus read the DVD device directly, because when all is said and done, something has to read/write directly to it. info growisofs says: Under Linux it will most likely be an ide-scsi device such as "/dev/scd0 How can I find this Id via a script?

    Read the article

  • Dim (NEARLY blank) laptop screen, secondary screen works - why?

    - by LIttle Ancient Forest Kami
    My laptop screen is (almost) black while my secondary screen is fine. I believe it to be backlight / brightness related. Problem description it starts when I start the laptop system loads and works fine, just screen has problems I can see the screen though very faintly / dimly - it's hard to see anything which ain't very white e.g. starting screen has big Thinkpad logo in white, large font - I can see it, though very dimly second screen works very well Official backligtht debugging: using acpi setting as prescribed there for Thinkpads didn't help I can see an entry in /sys/class/backlight/ and it changes when I press hotkeys for brightness (current backlight power for instance goes up or down) acpi-off didn't helpm neither did acpi_backlight=vendor Hardware data Laptop is Thinkpad Edge with glossy screen. 4 processors, 2 cores, exemplary CPU data from cat /proc/cpuinfo reports Genuine Intel i5 (M 480 @ 2.67GHz). OS is Ubuntu Lucid, 10.04 LTS, 64-bit, with Linux generic kernel (2.6.32-44) and GNOME 2.32.2 (though I doubt there lies the problem). $ lspci | grep VGA 01:00.0 VGA compatible controller: ATI Technologies Inc M92 [Mobility Radeon HD 4500 Series] $ lshw -C display *-display description: VGA compatible controller product: M92 [Mobility Radeon HD 4500 Series] vendor: ATI Technologies Inc physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 32 bits clock: 33MHz capabilities: pm pciexpress msi bus_master cap_list rom configuration: driver=radeon latency=0 resources: irq:33 memory:c0000000-dfffffff(prefetchable) ioport:2000(size=256) memory:f0300000-f030ffff memory:f0320000-f033ffff(prefetchable) Driver I was NOT running any proprietary drivers, just checked with "Hardware drivers". There is one for ATI that is suggested there, though I didn't need it so far. UPDATE: changing the driver to proprietary one (ATI/AMD FGLRX) didn't help. Tried and failed Resetting / running on power or battery / charging / getting rid of static electricity / warming up *doesn't help* This is NOT a blank-screen problem, at least it isn't following official Ubuntu black-screen diagnostics - I can see my screen, though barely. What I will try next: - check last updates I've made - IIRC I am running on nomodeset already, but will verify this Any ideas how to proceed best? What is most probable cause?

    Read the article

  • aplay -l says no soundcards found; alsaconf says no supported cords; yet /proc/asound contains cards

    - by nimasmi
    I am trying to get HDMI output using a Gainward Nvidia 210 512 MB on Ubuntu 10.04 Lucid Lynx. I have upgraded alsa-driver, alsa-lib and alsa-utils to 1.0.24 by building from source, thanks to this blog post. Some relevant output... user@box:~$ lspci | grep Audio 00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2) 01:09.0 Multimedia video controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder (rev 05) 01:09.2 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05) 01:09.4 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [IR Port] (rev 05) 02:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev a1) user@box:~$ cat /proc/asound/version Advanced Linux Sound Architecture Driver Version 1.0.24. Compiled on Sep 15 2012 for kernel 2.6.32-42-generic (SMP). user@box:~$ ls /proc/asound` card0 cards hwdep NVidia oss seq version card1 devices modules NVidia_1 pcm timers user@box:~$ aplay -l aplay: device_list:240: no soundcards found... user@box:~$ sudo /sbin/alsa-utils start * Setting up ALSA... * warning: 'alsactl restore' failed with error message 'alsactl: set_control:1403: Cannot write control '2:0:0:IEC958 Playback Default:0' : Operation not permitted'... amixer: Invalid command! ...done. Any help appreciated. PS my video card is connected only through the PCI-E slot. I assume there is no extra audio connection required.

    Read the article

  • Password not working for sudo ("Authentication failure")

    - by Souta
    Before I mention anything further, DO NOT give me a response saying that terminal won't show password input. I'm AWARE of that. I'm typing my user password in (not a capslock issue), and for some reason it still says 'Authentication Failure'. Is there some other password (one I'm not aware of) I'm supposed to be using other than my user password? I've had this ubuntu before, on another hard drive and I didn't have this problem. (And it was the same ubuntu, ubuntu 12.04 LTS) ai@AiNekoYokai:~$ groups ai adm cdrom sudo dip plugdev lpadmin sambashare ai@AiNekoYokai:~$ lsb_release -rd Description: Ubuntu 12.04 LTS Release: 12.04 ai@AiNekoYokai:~$ pkexec cat /etc/sudoers # # This file MUST be edited with the 'visudo' command as root. # # Please consider adding local content in /etc/sudoers.d/ instead of # directly modifying this file. # # See the man page for details on how to write a sudoers file. # Defaults env_reset Defaults secure_path="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" # Host alias specification # User alias specification # Cmnd alias specification # User privilege specification root ALL=(ALL:ALL) ALL # Members of the admin group may gain root privileges %admin ALL=(ALL) ALL # Allow members of group sudo to execute any command %sudo ALL=(ALL:ALL) ALL # See sudoers(5) for more information on "#include" directives: #includedir /etc/sudoers.d I can log in with my password, but it's not accepted as valid for authentication <-- That is pretty much my issue. (Although, I haven't gone into recovery mode.) I've ran: ai@AiNekoYokai:~$ ls /etc/sudoers.d README And also reinstalled sudo with: pkexec apt-get update pkexec apt-get --purge --reinstall install sudo pkexec usermod -a -G admin $USER <- Says admin does not exist su $USER <- worked for me, however, my password still does not do much (in sense of not working for other things) I changed my password with pkexec passwd $USER. I was able to change it no problem. gksudo xclock was something I was able to get into, no problem. (Clock showed) ai@AiNekoYokai:~$ gksudo xclock

    Read the article

  • Ubuntu won't log in after update

    - by Dave M G
    I just updated Ubuntu about 15 minutes ago on my desktop which is running 12.04. Within the set of updates, there were some kernel upgrades. It didn't say I needed to reboot after the update was finished, but I thought I would anyway. The computer successfully rebooted up to the login screen. However, after entering my password, the screen goes black for a moment, then it comes back to the login screen. I tried the suggestions in this question, but unfortunately they didn't help. In the accepted answer, the questioner vaguely says it was a "Unity problem". I'm using Gnome-classic with full Compiz effects. I tried uninstalling and reinstalling Compiz, but that didn't fix anything. So... I can't use my desktop computer until this is fixed. I hope there is some help soon. I've uploaded the output of cat /var/log/Xorg.0.log to Pastebin. A temporary solution of changing to gdm instead of lightdm was found with help in the chat room.

    Read the article

  • Another hibernation question

    - by GeekOfTheWeek
    I installed Ubuntu on my Windows 7 Sager laptop using Wubi. Hibernate (i.e. suspend to disc) is not an option from the power icon, only suspend, shutdown, etc. Hibernate is also not an option from my battery/lid close options. I understand that hibernation is disabled by default in Ubuntu 12.04. I tried running pm-hibernate but I get the following message: Looking for splash system... none s2disk: Snapshotting system and then the computer just hangs with a black screen. According to the documentation here if this fails then I can't enable hibernate but it offers no help in making pm-hibernate succeed. Could swap be my problem? It looks like I have very small swap: user@ubuntu:~$ cat /proc/swaps Filename Type Size Used Priority /host/ubuntu/disks/swap.disk file 262140 0 -1 The advice on SwapFaq is only for the author's set up (e.g. I don't have an Ubuntu install disk since I used Wubi) and he says that 'INFO: This will not work for 12.04, resume from hibernate work differently in 12.04.' Any advice? I really need to get hibernate working to use my laptop as a, er, laptop. Thanks

    Read the article

  • Exadata???DiskGroup

    - by Liu Maclean(???)
    Exadata???Asm Diskgroup ???????: 1.??dcli -g /home/oracle/cell_group -l root cellcli -e list griddisk ????active?griddisk [root@dm01db01 ~]# dcli -g /home/oracle/cell_group -l root cellcli -e list griddisk dm01cel01: DATA_DM01_CD_00_dm01cel01 active dm01cel01: DATA_DM01_CD_01_dm01cel01 active dm01cel01: DATA_DM01_CD_02_dm01cel01 active dm01cel01: DATA_DM01_CD_03_dm01cel01 active dm01cel01: DATA_DM01_CD_04_dm01cel01 active dm01cel01: DATA_DM01_CD_05_dm01cel01 active dm01cel01: DATA_DM01_CD_06_dm01cel01 active dm01cel01: DATA_DM01_CD_07_dm01cel01 active dm01cel01: DATA_DM01_CD_08_dm01cel01 active dm01cel01: DATA_DM01_CD_09_dm01cel01 active dm01cel01: DATA_DM01_CD_10_dm01cel01 active dm01cel01: DATA_DM01_CD_11_dm01cel01 active dm01cel01: DBFS_DG_CD_02_dm01cel01 active dm01cel01: DBFS_DG_CD_03_dm01cel01 active dm01cel01: DBFS_DG_CD_04_dm01cel01 active dm01cel01: DBFS_DG_CD_05_dm01cel01 active dm01cel01: DBFS_DG_CD_06_dm01cel01 active dm01cel01: DBFS_DG_CD_07_dm01cel01 active dm01cel01: DBFS_DG_CD_08_dm01cel01 active dm01cel01: DBFS_DG_CD_09_dm01cel01 active dm01cel01: DBFS_DG_CD_10_dm01cel01 active dm01cel01: DBFS_DG_CD_11_dm01cel01 active dm01cel01: RECO_DM01_CD_00_dm01cel01 active dm01cel01: RECO_DM01_CD_01_dm01cel01 active dm01cel01: RECO_DM01_CD_02_dm01cel01 active dm01cel01: RECO_DM01_CD_03_dm01cel01 active dm01cel01: RECO_DM01_CD_04_dm01cel01 active dm01cel01: RECO_DM01_CD_05_dm01cel01 active dm01cel01: RECO_DM01_CD_06_dm01cel01 active dm01cel01: RECO_DM01_CD_07_dm01cel01 active dm01cel01: RECO_DM01_CD_08_dm01cel01 active dm01cel01: RECO_DM01_CD_09_dm01cel01 active dm01cel01: RECO_DM01_CD_10_dm01cel01 active dm01cel01: RECO_DM01_CD_11_dm01cel01 active dm01cel02: DATA_DM01_CD_00_dm01cel02 active dm01cel02: DATA_DM01_CD_01_dm01cel02 active dm01cel02: DATA_DM01_CD_02_dm01cel02 active dm01cel02: DATA_DM01_CD_03_dm01cel02 active dm01cel02: DATA_DM01_CD_04_dm01cel02 active dm01cel02: DATA_DM01_CD_05_dm01cel02 active dm01cel02: DATA_DM01_CD_06_dm01cel02 active dm01cel02: DATA_DM01_CD_07_dm01cel02 active dm01cel02: DATA_DM01_CD_08_dm01cel02 active dm01cel02: DATA_DM01_CD_09_dm01cel02 active dm01cel02: DATA_DM01_CD_10_dm01cel02 active dm01cel02: DATA_DM01_CD_11_dm01cel02 active dm01cel02: DBFS_DG_CD_02_dm01cel02 active dm01cel02: DBFS_DG_CD_03_dm01cel02 active dm01cel02: DBFS_DG_CD_04_dm01cel02 active dm01cel02: DBFS_DG_CD_05_dm01cel02 active dm01cel02: DBFS_DG_CD_06_dm01cel02 active dm01cel02: DBFS_DG_CD_07_dm01cel02 active dm01cel02: DBFS_DG_CD_08_dm01cel02 active dm01cel02: DBFS_DG_CD_09_dm01cel02 active dm01cel02: DBFS_DG_CD_10_dm01cel02 active dm01cel02: DBFS_DG_CD_11_dm01cel02 active dm01cel02: RECO_DM01_CD_00_dm01cel02 active dm01cel02: RECO_DM01_CD_01_dm01cel02 active dm01cel02: RECO_DM01_CD_02_dm01cel02 active dm01cel02: RECO_DM01_CD_03_dm01cel02 active dm01cel02: RECO_DM01_CD_04_dm01cel02 active dm01cel02: RECO_DM01_CD_05_dm01cel02 active dm01cel02: RECO_DM01_CD_06_dm01cel02 active dm01cel02: RECO_DM01_CD_07_dm01cel02 active dm01cel02: RECO_DM01_CD_08_dm01cel02 active dm01cel02: RECO_DM01_CD_09_dm01cel02 active dm01cel02: RECO_DM01_CD_10_dm01cel02 active dm01cel02: RECO_DM01_CD_11_dm01cel02 active dm01cel03: DATA_DM01_CD_00_dm01cel03 active dm01cel03: DATA_DM01_CD_01_dm01cel03 active dm01cel03: DATA_DM01_CD_02_dm01cel03 active dm01cel03: DATA_DM01_CD_03_dm01cel03 active dm01cel03: DATA_DM01_CD_04_dm01cel03 active dm01cel03: DATA_DM01_CD_05_dm01cel03 active dm01cel03: DATA_DM01_CD_06_dm01cel03 active dm01cel03: DATA_DM01_CD_07_dm01cel03 active dm01cel03: DATA_DM01_CD_08_dm01cel03 active dm01cel03: DATA_DM01_CD_09_dm01cel03 active dm01cel03: DATA_DM01_CD_10_dm01cel03 active dm01cel03: DATA_DM01_CD_11_dm01cel03 active dm01cel03: DBFS_DG_CD_02_dm01cel03 active dm01cel03: DBFS_DG_CD_03_dm01cel03 active dm01cel03: DBFS_DG_CD_04_dm01cel03 active dm01cel03: DBFS_DG_CD_05_dm01cel03 active dm01cel03: DBFS_DG_CD_06_dm01cel03 active dm01cel03: DBFS_DG_CD_07_dm01cel03 active dm01cel03: DBFS_DG_CD_08_dm01cel03 active dm01cel03: DBFS_DG_CD_09_dm01cel03 active dm01cel03: DBFS_DG_CD_10_dm01cel03 active dm01cel03: DBFS_DG_CD_11_dm01cel03 active dm01cel03: RECO_DM01_CD_00_dm01cel03 active dm01cel03: RECO_DM01_CD_01_dm01cel03 active dm01cel03: RECO_DM01_CD_02_dm01cel03 active dm01cel03: RECO_DM01_CD_03_dm01cel03 active dm01cel03: RECO_DM01_CD_04_dm01cel03 active dm01cel03: RECO_DM01_CD_05_dm01cel03 active dm01cel03: RECO_DM01_CD_06_dm01cel03 active dm01cel03: RECO_DM01_CD_07_dm01cel03 active dm01cel03: RECO_DM01_CD_08_dm01cel03 active dm01cel03: RECO_DM01_CD_09_dm01cel03 active dm01cel03: RECO_DM01_CD_10_dm01cel03 active dm01cel03: RECO_DM01_CD_11_dm01cel03 active ??????????griddisk, ?????’cellcli -e drop griddisk’ ?’cellcli -e create griddisk’????griddisk ,??????drop DBFS_DG???griddisk 2.??ASM???create disk group ?????CELL?IP,????????????? [root@dm01db02 ~]# cat /etc/oracle/cell/network-config/cellip.ora cell="192.168.64.131" cell="192.168.64.132" cell="192.168.64.133" SQL> create diskgroup DATA_MAC normal redundancy 2 DISK 3 'o/192.168.64.131/RECO_DM01_CD_*_dm01cel01' 4 ,'o/192.168.64.132/RECO_DM01_CD_*_dm01cel02' 5 ,'o/192.168.64.133/RECO_DM01_CD_*_dm01cel03' 6 attribute 7 'AU_SIZE'='4M', 8 'CELL.SMART_SCAN_CAPABLE'='TRUE', 9 'compatible.rdbms'='11.2.0.2', 10 'compatible.asm'='11.2.0.2' 11 / 3. MOUNT ???DISKGROUP ALTER DISKGROUP DATA_MAC mount ; 4.???crsctl start/stop resource ora.DATA_MAC.dg ?????

    Read the article

  • How to reset the language of the package descriptions

    - by xubuntix
    I have had German as my main language about a year ago. Later I changed it to English. Most parts of the system accepted the change. The notable exceptions are the package descriptions, which remain in German for some packages. You can see in the image (apt-cache and software-center), that while some descriptions are in English, some have remained in German. So the question is: how do I reset this? I guess that there is somewhere a description cache that needs to be told that it should update all descriptions? EDIT: As asked: the output of some language related commands: $ cat /etc/default/locale LANG="en_US.UTF-8" $ apt-config dump | grep Lang Acquire::Languages ""; Acquire::Languages:: "de_DE"; Acquire::Languages:: "de"; Acquire::Languages:: "en"; Acquire::Languages:: "none"; $ locale LANG=de_DE.UTF-8 LANGUAGE=en LC_CTYPE="de_DE.UTF-8" LC_NUMERIC="de_DE.UTF-8" LC_TIME="de_DE.UTF-8" LC_COLLATE="de_DE.UTF-8" LC_MONETARY="de_DE.UTF-8" LC_MESSAGES="de_DE.UTF-8" LC_PAPER="de_DE.UTF-8" LC_NAME="de_DE.UTF-8" LC_ADDRESS="de_DE.UTF-8" LC_TELEPHONE="de_DE.UTF-8" LC_MEASUREMENT="de_DE.UTF-8" LC_IDENTIFICATION="de_DE.UTF-8" LC_ALL= As a note: I'm not sure what each entry means, but some of the de_DE.UTF-8 are probably ok, since I do want paper-sizes, monetary, time, etc. in standard German formats.

    Read the article

  • Laptop battery charging capacity reduced to 52%

    - by omjaijagdish
    I have been using Ubuntu 11.04 on DELL Inspiron 14R (N5010) laptop for last three months. Before I switch to ubuntu my laptop battery used to give 2.5 hrs to 3 hrs back-up. But since I have been using ubuntu, it has been reduced to 1hr to 1.5 hrs at max. I tried following commands: $ cat /proc/acpi/battery/BAT0/state which gave result as present: yes capacity state: ok charging state: charged present rate: 1 mA remaining capacity: 4400 mAh present voltage: 12407 mV then I tried $ acpi -b the result was.. Battery 0: Unknown, 100% when I gave command as $ upower -i /org/freedesktop/UPower/devices/battery_BAT0 the result was.. native-path: /sys/devices/LNXSYSTM:00/device:00/PNP0C0A:00/power_supply/BAT0 model: DELL W7H3N08 serial: 7114 power supply: yes updated: Sat Nov 24 11:25:34 2012 (21 seconds ago) has history: yes has statistics: yes battery present: yes rechargeable: yes state: fully-charged energy: 48.4748 Wh energy-empty: 0 Wh energy-full: 48.4748 Wh energy-full-design: 48.9595 Wh energy-rate: 0.011017 W voltage: 12.408 V percentage: 100% **capacity: 52.9253%** technology: lithium-ion Someone please let me know, what is going wrong with my laptop? How can I get charging with full capacity?

    Read the article

  • How to Install Broadcom Wireless Drivers (BCM43xx)

    - by Fer1805
    I'm having serious problems installing the Broadcom drivers for Ubuntu. It worked perfectly on my previous version, but now, it is impossible. I'm a user with no advance knowledge in Linux, so I would need clear explanations on make, compile, etc. Edit: For the command: "lspci | grep Network", I get the following message: 06:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01) For the command: iwconfig, i get the following: lo no wireless extensions. eth0 no wireless extensions. When i follow the following steps (from the above link), there are a NO error message at all: open the 'Synaptic Package Manager' and search for bcm uninstall the bcm-kernel-source package make sure that the firmware-b43-installer and the b43-fwcutter packages are installed type into terminal: cat /etc/modprobe.d/* | egrep '8180|acx|at76|ath|b43|bcm|CX|eth|ipw|irmware|isl|lbtf|orinoco|ndiswrapper|NPE|p54|prism|rtl|rt2|rt3|rt6|rt7|witch|wl' (you may want to copy this) and see if the term blacklist bcm43xx is there if it is, type cd /etc/modprobe.d/ and then sudo gedit blacklist.conf put a # in front of the line: blacklist bcm43xx then save the file (I was getting error messages in the terminal about not being able to save, but it actually did save properly). reboot 'End of procedure' Before (not ubuntu 11.04), if i wanted to connect wireles, i just went to the icon at the upper side of the screen, click, showed ALL the wireless network available, and done. Now, the only options i see are: Wired Network Auto Eth0 Disconnect VPN Enable networking Connection information Edit connection. lspci -vnn | grep Network showed: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller [14e4:432b] hope above info is enough for your help.

    Read the article

  • How to mount drive in /media/userName/ like nautilus do using udisks

    - by Bsienn
    As of my current installation of Ubuntu 13.10 Unity, when i click on a drive in nautilus it get mounted in /media/username/mountedDrive i read that nautilus use udisks to do that. Basically i want to auto mount my drive using udisks in start up using this method But problem is, it mounts the drive in /media/mountedDrive, but i want it the way nautilus do in /media/username/mounteDrive I want NTFS Data drive to be auto mounted at /media/bsienn/ bsienn@bsienn-desktop:~$ blkid /dev/sda1: LABEL="System Reserved" UUID="8230744030743D6B" TYPE="ntfs" /dev/sda2: LABEL="Windows 7" UUID="60100EA5100E81F0" TYPE="ntfs" /dev/sda3: LABEL="Data" UUID="882C04092C03F14C" TYPE="ntfs" /dev/sda5: UUID="8768800f-59e1-41a2-9092-c0a8cb60dabf" TYPE="swap" /dev/sda6: LABEL="Ubuntu Drive" UUID="13ea474a-fb27-4c91-bae7-c45690f88954" TYPE="ext4" /dev/sda7: UUID="69c22e73-9f64-4b48-b854-7b121642cd5d" TYPE="ext4" bsienn@bsienn-desktop:~$ sudo fdisk -l Disk /dev/sda: 160.0 GB, 160000000000 bytes 255 heads, 63 sectors/track, 19452 cylinders, total 312500000 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x8d528d52 Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 117730069 58761611 7 HPFS/NTFS/exFAT /dev/sda3 158690072 312494116 76902022+ 7 HPFS/NTFS/exFAT /dev/sda4 117731326 158689279 20478977 5 Extended /dev/sda5 137263104 141260799 1998848 82 Linux swap / Solaris /dev/sda6 141262848 158689279 8713216 83 Linux /dev/sda7 117731328 137263103 9765888 83 Linux Partition table entries are not in disk order bsienn@bsienn-desktop:~$ cat /etc/fstab # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> # / was on /dev/sda7 during installation UUID=69c22e73-9f64-4b48-b854-7b121642cd5d / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=8768800f-59e1-41a2-9092-c0a8cb60dabf none swap sw 0 0 Desired effect: Picture link

    Read the article

  • How do I configure an Intel HD Graphics 4000?

    - by derabbink
    First off, please note that last night I already posted this question to a launchpad mailing list, so this could be considered a cross post. However, I think this is a better place to ask the same question The question: How can I configure my Ubuntu 12.04, with upgraded kernel (3.6), to use the Intel HD Graphics 4000 adapter? (Intel HD 4000 is the standard of 3rd gen Intel Core i7 (Ivy Bridge) graphics adapter) Some output: $ glxinfo name of display: :0 X Error of failed request: BadRequest (invalid request code or no such operation) Major opcode of failed request: 154 (GLX) Minor opcode of failed request: 19 (X_GLXQueryServerString) Serial number of failed request: 12 Current serial number in output stream: 12 $ cat /etc/X11/xorg.conf this is probably the farthest from what it should be Section "Screen" Identifier "Default Screen" DefaultDepth 24 EndSection Section "Module" Load "glx" EndSection $ lspci I only listed the line I think are relevant. If you want more info in order to help me, please comment :) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 16:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Whistler XT [AMD Radeon HD 6700M Series] 16:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Turks HDMI Audio [Radeon HD 6000 Series]

    Read the article

  • noexec option enabled in fstab is not getting applicable for limited user. Is it a bug?

    - by user170918
    noexec option enabled in fstab is not getting applicable for limited user. Is it a bug? cat /etc/fstab # / was on /dev/sda2 during installation UUID=fd7e2645-3cc4-4c6c-8b1b-016711c2fd07 / ext4 errors=remount-ro 0 1 # /boot was on /dev/sda1 during installation UUID=f3e58f86-8999-4678-a5ec-0a4b621c6e37 /boot ext4 defaults 0 2 # /home was on /dev/sda9 during installation UUID=bcbc1c4d-46a9-4b2a-bb0a-6fe1bdeaed22 /home ext4 defaults,nodev,nosuid 0 2 # /tmp was on /dev/sda5 during installation UUID=8538eecc-bd16-40fe-ad66-7d7b9287839e /tmp ext4 defaults,noexec,nosuid,nodev 0 2 # /var was on /dev/sda6 during installation UUID=292696cf-fc15-40ab-9cd8-cee9bff7e165 /var ext4 defaults,nosuid,nodev 0 2 # /var/log was on /dev/sda7 during installation UUID=fab1f85b-ae09-4ce0-b169-c01205eb8f9c /var/log ext4 defaults,noexec,nosuid,nodev 0 2 # /var/log/audit was on /dev/sda8 during installation UUID=602f5003-4ac0-49e9-99d3-b29378ce9430 /var/log/audit ext4 defaults,noexec,nosuid,nodev 0 2 # swap was on /dev/sda3 during installation UUID=a538d35b-b2e9-47f2-b72d-5dbbcf0afca0 none swap sw 0 0 /dev/sdb1 /mnt/usblpsc auto noauto,user,rw,noexec,nosuid,nodev 0 0 /dev/sdc1 /mnt/usblpsc auto noauto,user,rw,noexec,nosuid,nodev 0 0 /dev/sdd1 /mnt/usblpsc auto noauto,user,rw,noexec,nosuid,nodev 0 0 sudo users are not able to paste executable files in /bin into the file system which have the noexec option set. But limited users are able to paste the same files into the file system which have noexec option set. Why is it so?

    Read the article

  • Used mountmanager now Ubuntu hangs on boot

    - by fpghost
    I was using MountManager in Ubuntu 12.04 to set user permissions in mounting hard drives. I set each partititon to be mountable by everyone instead of admin only. Then I clicked Apply in the file menu and it gave me the message successfully updated. Upon restarting Ubuntu, just hangs on the splash screen and does not boot any further. Windows still boots fine. How can I fix these? please help thanks From LiveUSB: my fstab looks like: overlayfs / overlayfs rw 0 0 tmpfs /tmp tmpfs nosuid,nodev 0 0 /dev/sda5 swap swap defaults 0 0 /dev/sda7 swap swap defaults 0 0 Is this corrupted? Other things that may be helpful: blkid returns /dev/loop0: TYPE="squashfs" /dev/sda1: LABEL="System Reserved" UUID="0AF26C31F26C22E5" TYPE="ntfs" /dev/sda2: UUID="5E1C88E31C88B813" TYPE="ntfs" /dev/sda3: UUID="94B2BB7DB2BB6282" TYPE="ntfs" /dev/sda5: UUID="41b66b9a-2b48-45cf-b59d-cd50e41ec971" TYPE="swap" /dev/sda6: UUID="c73ca79e-4fa4-4bde-967e-670593736f6a" TYPE="ext4" /dev/sda7: UUID="c05d659f-103c-4444-9dc4-3121b9e081d6" TYPE="swap" /dev/sdb1: LABEL="PENDRIVE" UUID="1DE8-0A49" TYPE="vfat" and cat /proc/mounts rootfs / rootfs rw 0 0 sysfs /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0 proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0 udev /dev devtmpfs rw,relatime,size=1950000k,nr_inodes=206759,mode=755 0 0 devpts /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0 tmpfs /run tmpfs rw,nosuid,relatime,size=783056k,mode=755 0 0 /dev/sdb1 /cdrom vfat rw,relatime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1,shortname=mixed,erro rs=remount-ro 0 0 /dev/loop0 /rofs squashfs ro,noatime 0 0 tmpfs /cow tmpfs rw,noatime,mode=755 0 0 /cow / overlayfs rw,relatime,lowerdir=//filesystem.squashfs,upperdir=/cow 0 0 none /sys/fs/fuse/connections fusectl rw,relatime 0 0 none /sys/kernel/debug debugfs rw,relatime 0 0 none /sys/kernel/security securityfs rw,relatime 0 0 tmpfs /tmp tmpfs rw,nosuid,nodev,relatime 0 0 none /run/lock tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k 0 0 none /run/shm tmpfs rw,nosuid,nodev,relatime 0 0 gvfs-fuse-daemon /home/ubuntu/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,relatime,user_id=999,group_id=999 0 0

    Read the article

  • Bikeshedding: Placeholders in strings

    - by dotancohen
    I find that I sometimes use placeholders in strings, like this: $ cat example-apache <VirtualHost *:80> ServerName ##DOMAIN_NAME## ServerAlias www.##DOMAIN_NAME## DocumentRoot /var/www/##DOMAIN_NAME##/public_html </VirtualHost> Now I am sure that it is a minor issue if the placeholder is ##DOMAIN_NAME##, !!DOMAIN_NAME!!, {{DOMAIN_NAME}}, or some other variant. However, I now need to standardize with other developers on a project, and we all have a vested interest in having our own placeholder format made standard in the organization. Are there any good reasons for choosing any of these, or others? I am trying to quantify these considerations: Aesthetics and usability. For example, __dict__ may be hard to read as we don't know how many underscores are in there. Compatibility. Will some language try to do something funny with {} syntax in a string (such as PHP does with "Welcome to {$siteName} today!")? Actually, I know that PHP and Python won't, but others? Will a C++ preprocessor choke on ## format? If I need to store the value in some SQL engine, will it not consider something a comment? Any other pitfalls to be wary of? Maintainability. Will the new guy mistake ##SOME_PLACEHOLDER## as a language construct? The unknown. Surely the wise folk here will think of other aspects of this decision that I have not thought of. I might be bikeshedding this, but if there are real issues that might be lurking then I would certainly like to know about them before mandating that our developers adhere to a potentially-problematic convention.

    Read the article

  • How come I cannot make this file executable (chmod permissions)?

    - by bappi48
    I downloaded Android Development Tool for linux (ADT) and placed it in home directory. After unzipping the files, when I double click the "eclipse" executable file; the eclipse works perfectly fine. But If I unzip the ADT in a different directory, in my case directory E: (is shown when I boot in windows 7) There double clicking the same "eclipse" executable file does not run eclipse. It shows error message: Could not display /media/Software/00.AndroidLinux/ADT/eclipse/eclipse. There is no application installed for executable files. Do you want to search for an application to open this file? If I press yes in the Dialog, it finds "Pypar2" which is not my solution. I found that the "eclipse" file permission is following -rw------- 1 tanvir tanvir 63050 Feb 4 19:05 eclipse I tried to change the permission by "chmod +x eclipse" , but no use. This command does not change the file permission at all in this case. what should I do? Relevant output of cat /proc/mounts: /dev/sda6 /media/Software fuseblk rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096 0 0 Please not that I'm new to Ubuntu and still learning day by day.

    Read the article

  • No sound, can't adjust alsamixer volume

    - by user734613
    I have no sound on my ubuntu and I do not know why. I saw a lot of posts about that, I tried a lots of solutions that I found (especially this one) but it still does not work. I suspect alsamixer. I can't adjust the sound. http://img15.hostingpics.net/pics/447765Screenshotfrom20120621140430.png I tried to reinstall alsa mixer using this tutorial but it seems the package does not exist anymore. E: Unable to locate package linux-alsa-driver-modules-3.2.0-25-generic E: Couldn't find any package by regex 'linux-alsa-driver-modules-3.2.0-25-generic' Here are my configuration: cat /proc/driver/nvidia/version NVRM version: NVIDIA UNIX x86_64 Kernel Module 295.40 Thu Apr 5 21:37:00 PDT 2012 GCC version: gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) aplay -l List of PLAYBACK Hardware Devices ** card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1] Subdevices: 1/1 Subdevice #0: subdevice #0 grep eld_valid /proc/asound/NVidia/eld* /proc/asound/NVidia/eld#0.0:eld_valid 0 /proc/asound/NVidia/eld#0.1:eld_valid 0 Thanks in advance for your help.

    Read the article

  • Placeholders in strings

    - by dotancohen
    I find that I sometimes use placeholders in strings, like this: $ cat example-apache <VirtualHost *:80> ServerName ##DOMAIN_NAME## ServerAlias www.##DOMAIN_NAME## DocumentRoot /var/www/##DOMAIN_NAME##/public_html </VirtualHost> Now I am sure that it is a minor issue if the placeholder is ##DOMAIN_NAME##, !!DOMAIN_NAME!!, {{DOMAIN_NAME}}, or some other variant. However, I now need to standardize with other developers on a project, and we all have a vested interest in having our own placeholder format made standard in the organization. Are there any good reasons for choosing any of these, or others? I am trying to quantify these considerations: Aesthetics and usability. For example, __dict__ may be hard to read as we don't know how many underscores are in there. Compatibility. Will some language try to do something funny with {} syntax in a string (such as PHP does with "Welcome to {$siteName} today!")? Actually, I know that PHP and Python won't, but others? Will a C++ preprocessor choke on ## format? If I need to store the value in some SQL engine, will it not consider something a comment? Any other pitfalls to be wary of? Maintainability. Will the new guy mistake ##SOME_PLACEHOLDER## as a language construct? The unknown. Surely the wise folk here will think of other aspects of this decision that I have not thought of. I might be bikeshedding this, but if there are real issues that might be lurking then I would certainly like to know about them before mandating that our developers adhere to a potentially-problematic convention.

    Read the article

< Previous Page | 52 53 54 55 56 57 58 59 60 61 62 63  | Next Page >