Search Results

Search found 4065 results on 163 pages for 'unknown fool'.

Page 56/163 | < Previous Page | 52 53 54 55 56 57 58 59 60 61 62 63  | Next Page >

  • Sony Ericsson Windows driver problem

    - by alex
    I've installed Update Service and MediaGo for my Sony Ericsson phone but one of the drivers that was installed along with the software is causing problems in Windows 7 x64. Looking in the Event Log I see the following warning: Detected unrecognized USB driver (\Driver\seehcri) This is the driver corresponding to the Sony Ericsson seehcri Control Device. The failure to recognize the USB driver is causing problems with other services, namely the VMware USB Arbitration Service. It should normally start automatically but, due to the failure to recognize the seehcri USB driver, it fails with the following error: Error 31: A device attached to the system is not functioning. Disabling the driver has not helped at all. The VMWare service still refuses to start and I keep getting both warnings in the Event Log. I would like to remove the Sony Ericsson driver but unfortunately, that's not possible. Uninstalling the Sony Ericsson seehcri Control Device from Device Manager causes Windows to almost completely freeze up while trying to look for drivers for unrecognized hardware. Windows tries over and over again to locate and install drivers for an Unknown device, failing every time. Looking in Device Manager, it simply fills up with hundreds of unknown devices, also using up the CPU to almost 85% in the process. What should I do? How can I safely remove the driver without causing Windows to look for a new driver?

    Read the article

  • PHP Startup: Unable to load dynamic library '/usr/lib64/php/modules/json.so' undefined symbol: ZVAL_DELREF

    - by crmpicco
    I have an issue where I am unable to use JSON, which would appear to be because of the following error. There is another thread on this forum this touches on a similar issue, but it's not quite the same. I am using CentOS 5.6 and have the following pear packages installed: [crmpicco@eq-www-php53 ~]$ pear list PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib64/php/modules/json.so' - /usr/lib64/php/modules/json.so: undefined symbol: ZVAL_DELREF in Unknown on line 0 Installed packages, channel pear.php.net: ========================================= Package Version State Archive_Tar 1.3.7 stable Auth_SASL 1.0.2 stable Console_Getopt 1.3.1 stable Image_Barcode 1.1.2 stable Mail 1.1.14 stable Net_SMTP 1.2.10 stable Net_Socket 1.0.8 stable PEAR 1.9.4 stable Structures_Graph 1.0.4 stable XML_RPC 1.5.4 stable XML_Util 1.2.1 stable json 1.2.1 stable and have the following PHP packages installed: [crmpicco@eq-www-php53 ~]$ yum list installed | grep php php.x86_64 5.3.10-1.w5 installed php-cli.x86_64 5.3.10-1.w5 installed php-common.x86_64 5.3.10-1.w5 installed php-devel.x86_64 5.3.10-1.w5 installed php-gd.x86_64 5.3.10-1.w5 installed php-ldap.x86_64 5.3.10-1.w5 installed php-mcrypt.x86_64 5.3.10-1.w5 installed php-mysql.x86_64 5.3.10-1.w5 installed php-pdo.x86_64 5.3.10-1.w5 installed php-pear.noarch 1:1.9.4-1.w5 installed php-pear-Net-Socket.noarch 1.0.8-1.el5.centos installed php-soap.x86_64 5.3.10-1.w5 installed php-xml.x86_64 5.3.10-1.w5 installed The error: [crmpicco@eq-www-php53 ~]$ php -v PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib64/php/modules/json.so' - /usr/lib64/php/modules/json.so: undefined symbol: ZVAL_DELREF in Unknown on line 0 PHP 5.3.10 (cli) (built: Feb 2 2012 23:23:12) Copyright (c) 1997-2012 The PHP Group Zend Engine v2.3.0, Copyright (c) 1998-2012 Zend Technologies My repolist reads as: [crmpicco@eq-www-php53 ~]$ yum repolist Loaded plugins: changelog, fastestmirror Excluding Packages in global exclude list Finished repo id repo name status base CentOS-5 - Base 3,548+43 epel Extra Packages for Enterprise Linux 5 - x86_64 6,815+156 extras CentOS-5 - Extras 245+23 rpmforge Red Hat Enterprise 5 - RPMforge.net - dag 11,016+67 updates CentOS-5 - Updates 233 webtatic Webtatic Repository 5 - x86_64 211+183 repolist: 22,068 I am getting HTTP 500 errors everywhere that I use JSON so my application is non functional right now.

    Read the article

  • Networking stopped working on Ubuntu

    - by 1337Rooster
    I installed Ubuntu 10.04 through the Wubi installer (Funny, I installed it today and thought I would have gotten 10.10). I had a network connection and everything was working fine. I rebooted my coumputer a couple of times and then suddenly, I could not connect to the network and when I click the wireless/networking icon it says "Networking Disabled". I reinstalled Ubuntu and the problem went away. After a few reboots the problem returned. I have tried restarting to see if it would come back as well as a few other things listed below. Any other suggestions would be appreciated. Tried to restart networking via /etc/init.d/networking: amato@ubuntu:~$ sudo /etc/init.d/networking restart * Reconfiguring network interfaces... Ignoring unknown interface eth0=eth0. [ OK ] Tried to stop and start it: amato@ubuntu:~$ sudo /etc/init.d/networking stop * Deconfiguring network interfaces... [ OK ] amato@ubuntu:~$ amato@ubuntu:~$ sudo /etc/init.d/networking start Rather than invoking init scripts through /etc/init.d, use the service(8) utility, e.g. service networking start Since the script you are attempting to invoke has been converted to an Upstart job, you may also use the start(8) utility, e.g. start networking networking stop/waiting Tried start networking: amato@ubuntu:~$ start networking start: Rejected send message, 1 matched rules; type="method_call", sender=":1.58" (uid=1000 pid=2241 comm="start) interface="com.ubuntu.Upstart0_6.Job" member="Start" error name="(unset)" requested_reply=0 destination="com.ubuntu.Upstart" (uid=0 pid=1 comm="/sbin/init")) amato@ubuntu:~$ sudo start networking networking stop/waiting Tried service networking restart: amato@ubuntu:~$ service networking restart restart: Rejected send message, 1 matched rules; type="method_call", sender=":1.60" (uid=1000 pid=2248 comm="restart) interface="com.ubuntu.Upstart0_6.Job" member="Restart" error name="(unset)" requested_reply=0 destination="com.ubuntu.Upstart" (uid=0 pid=1 comm="/sbin/init")) amato@ubuntu:~$ sudo service networking restart restart: Unknown instance: Here are the contents of my /etc/network/interfaces. auto lo iface lo inet loopback I even tried to modify it to this (based on something I read, online, not sure if I was doing the right thing here). Tried everything again and no luck: auto lo eth0 iface lo inet loopback iface eth0 inet dhcp

    Read the article

  • Slackware Linux: Glib can't find libffi.so.6. Where is it trying to look?

    - by Mathmagician
    I have libffi installed and it's in /usr/local/lib, yet the glib make process can't find it /home/mathmagi/src/glib-2.32.4/gio/.libs/lt-glib-compile-resources: error while loading shared libraries: libffi.so.6: cannot open shared object file: No such file or directory /home/mathmagi/src/glib-2.32.4/gio/.libs/lt-glib-compile-resources: error while loading shared libraries: libffi.so.6: cannot open shared object file: No such file or directory /home/mathmagi/src/glib-2.32.4/gio/.libs/lt-glib-compile-resources: error while loading shared libraries: libffi.so.6: cannot open shared object file: No such file or directory /home/mathmagi/src/glib-2.32.4/gio/.libs/lt-glib-compile-resources: error while loading shared libraries: libffi.so.6: cannot open shared object file: No such file or directory make[4]: Entering directory `/home/mathmagi/src/glib-2.32.4/gio/tests' GEN gdbus-test-codegen-generated.c GEN test_resources.c /home/mathmagi/src/glib-2.32.4/gio/.libs/lt-glib-compile-resources: error while loading shared libraries: libffi.so.6: cannot open shared object file: No such file or directory make[4]: *** [test_resources.c] Error 127 make[4]: Leaving directory `/home/mathmagi/src/glib-2.32.4/gio/tests' make[3]: *** [all-recursive] Error 1 make[3]: Leaving directory `/home/mathmagi/src/glib-2.32.4/gio' make[2]: *** [all] Error 2 make[2]: Leaving directory `/home/mathmagi/src/glib-2.32.4/gio' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/mathmagi/src/glib-2.32.4' make: *** [all] Error 2 It's definitely in /usr/local/lib! bash-4.1# updatedb bash-4.1# locate libffi.so.6 /usr/local/lib/libffi.so.6 /usr/local/lib/libffi.so.6.0.0 /home/mathmagi/src/libffi-3.0.11/x86_64-unknown-linux-gnu/.libs/libffi.so.6 /home/mathmagi/src/libffi-3.0.11/x86_64-unknown-linux-gnu/.libs/libffi.so.6.0.0 With glib I've tried LDFLAGS=-L/usr/local/lib ./configure Doesn't work. How do I find where glib is looking and change it?

    Read the article

  • DNS Server address configured inside Router not working

    - by Charandeep Singh
    Well, I have an ISP router in which I have configured DNS Servers to use (Primary & Secondary) like Google DNS. It works just fine. But now I have setup a computer with DNS server (Simple DNS Plus). I got it working by settings my internal DNS Server IP Address in computer. i.e. 192.168.1.3 So, instead of settings my internal DNS IP Address in every computer in my network, I want to setup DNS Server into my router. So on every DHCP request, computer get DNS Server to use. So I configured it like this: Primary DNS: 192.168.1.3 Secondry DNS: (left blank) After applying and DNS Requests stop resolving. But strange part is DNS request does goes to DNS Server but maybe not returned back, because all DNS request were available in cache logs. I don't know why this is not working, let me know if you have any solution or wordaround for this. Thanks! Update 1: NSLOOKUP Result C:\Users\user>nslookup google.com DNS request timed out. timeout was 2 seconds. Server: UnKnown Address: 192.168.1.1 DNS request timed out. timeout was 2 seconds. DNS request timed out. timeout was 2 seconds. DNS request timed out. timeout was 2 seconds. DNS request timed out. timeout was 2 seconds. *** Request to UnKnown timed-out

    Read the article

  • Changes made to cli's php.ini not taking effect

    - by Sandeepan Nath
    I have two php.ini files - /etc/php.ini which loads in case of cli /opt/lampp/etc/php.ini which loads in case of browser. I am able to use PHP's Mailparse extension after adding the line extension=mailparse.so in the /opt/lampp/etc/php.ini and restarting lampp. But I am not able to load the same in case of command line - getting PHP Fatal error: Call to undefined function mailparse_msg_create() in ... mailparse_msg_create() is a part of the Mailparse extension. I tried by relogging with the user after making the change and even restarting the system. What needs to be done so that the change takes effect. Update I checked that php -i | grep 'Configuration File' gives PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/mailparse.so' - /usr/lib/php/modules/mailparse.so: cannot open shared object file: No such file or directory in Unknown on line 0 Configuration File (php.ini) Path => /etc Loaded Configuration File => /etc/php.ini Update 2 I copied the mailparse.so from /opt/lampp/lib/php/extensions/no-debug-non-zts-20090626 and put it in /usr/lib/php/modules. I added extension=mailparse.so to /etc/php.ini as well. But it still showed this warning PHP Warning: PHP Startup: Unable to load dynamic library ... As told by Lekensteyn, I did ldd /usr/lib/php/modules/mailparse.so and got ldd: warning: you do not have execution permission for /usr/lib/php/modules/mailparse.so' So I gave execute permission. Then ldd /usr/lib/php/modules/mailparse.so showed linux-gate.so.1 => (0x00110000) libc.so.6 => /lib/libc.so.6 (0x0011d000) /lib/ld-linux.so.2 (0x003aa000) which looks normal. BUt now, running php command says PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/mailparse.so' - /usr/lib/php/modules/mailparse.so: undefined symbol: mbfl_name2no_encoding in Unknown on line 0

    Read the article

  • Megacli is killing me, any help appreciated

    - by Stefan
    I run a server with 2 drives in raid0 configured through BIOS. I just added 2 more drives using hotplug (the server is dell r610 with RHEL 5.4 64bit) and I would like to configure a separate raid0 partition on these drives. I am getting the following error: /opt/MegaRAID/MegaCli/MegaCli64 -CfgLdAdd r0[32:2, 32:3] -a0 The specified physical disk does not have the appropriate attributes to complete the requested command. Exit Code: 0x26 All the parameters are correct and there is just no reason why this command could not work, see this (fujitsu is current raid, seagate is the new one I want to create): /opt/MegaRAID/MegaCli/MegaCli64 -PDList -aALL | egrep 'Adapter|Enclosure|Slot|Inquiry' Adapter #0 Enclosure Device ID: 32 Slot Number: 0 Enclosure position: 0 Inquiry Data: FUJITSU MBD2147RC D807D0A4PA101174 Enclosure Device ID: 32 Slot Number: 1 Enclosure position: 0 Inquiry Data: FUJITSU MBD2147RC D807D0A4PA10115T Enclosure Device ID: 32 Slot Number: 2 Enclosure position: 0 Inquiry Data: SEAGATE ST9300603SS FS033SE0TF5K Enclosure Device ID: 32 Slot Number: 3 Enclosure position: 0 Inquiry Data: SEAGATE ST9300603SS FS023SE070FK I also tried to set up the drive as hotspare, also some strange error: /opt/MegaRAID/MegaCli/MegaCli64 -PDHSP -Set -physdrv[32:3] -a0 Adapter: 0: Set Physical Drive at EnclId-32 SlotId-3 as Hot Spare Failed. FW error description: The specified device is in a state that doesn't support the requested command. Exit Code: 0x32 As you can see the disk is in Unconfigured, Good state: Enclosure Device ID: 32 Slot Number: 3 Enclosure position: 0 Device Id: 3 Sequence Number: 1 Media Error Count: 0 Other Error Count: 0 Predictive Failure Count: 0 Last Predictive Failure Event Seq Number: 0 PD Type: SAS Raw Size: 279.396 GB [0x22ecb25c Sectors] Non Coerced Size: 278.896 GB [0x22dcb25c Sectors] Coerced Size: 278.875 GB [0x22dc0000 Sectors] Firmware state: Unconfigured(good), Spun Up SAS Address(0): 0x5000c50005cd20b1 SAS Address(1): 0x0 Connected Port Number: 3(path0) Inquiry Data: SEAGATE ST9300603SS FS023SE070FK FDE Capable: Not Capable FDE Enable: Disable Secured: Unsecured Locked: Unlocked Needs EKM Attention: No Foreign State: Foreign Foreign Secure: Drive is not secured by a foreign lock key Device Speed: Unknown Link Speed: Unknown Media Type: Hard Disk Device Drive Temperature :30C (86.00 F)

    Read the article

  • BSOD Before Windows Will Loads - Graphics Related

    - by Brian
    Alright deep breath here: (Windows 7 Home Premium 64 bit btw) Today I installed Star Craft 2 Beta. After trying to log in, it had some issues where it said my device stopped working (referring to my video device I have to imagine). After I force quit the game there were some random "hot" (various colors if i remember correctly) pixels on the screen. I decided to reboot and try again with similar results. I figured that maybe my display drivers could stand to be updated (I don't frequently update them as I don't often run into problems). I went out to nVidia's website and grabbed the latest drivers for Windows 7 64 bit GeForce 9 series. (I have SLi-ed 9800 GTs). Everything seemed to install fine and I performed the restart. This is when things went from bad (can't play SC2 beta ;) ) to worse (can't boot into windows!). Initially the very first splash screen - I think it's the bios splash screen - had lines of colored pixels covering it. It then displayed a screen that had lots of "(" on it. After that it showed the normal windows 7 splash screen as if it were going to load into Windows. Before getting much further, it BSODed on me. It was a 0x0000003B stop error. At nvlddmkm.sys. A little digging let verified that this was a problem with an nVidia graphics device, not a real shocker. Windows decided it would try to help me diagnose the problem, which it's only answer to was a System Restore, which did nothing to alleviate the problem. I was able to boot up fine in safe mode and was not able to roll back the driver, however I did uninstall the driver and reboot. I still had the graphical anomalies during the first two screens (same colored "."'s and weird "("'s), but there was NOT a stop error. Windows loaded up, found a default driver for the device and installed it and I restarted to let it load - and had yet another BSOD Stop error. Repeat driver uninstall, this time I reloaded the same version (I think it's possible that I was running a 32 bit version or a vista versus windows 7 version, but I don't have that information handy) of the nVidia driver from their website. Restart, same anomalies, same Stop Error. I am at a loss - At this point all I can think is that the firmware for the Video cards got fried or there's actual damage to the cards which I sincerely hope is not the case but the sooner I know the better. Any insight into what I might be able to do to troubleshoot/fix this problem would be most helpful. Attached below is a dump from DxDiag. Please let me know if there is more info that I could provide. ------------------ System Information ------------------ Time of this report: 3/18/2010, 23:22:48 Machine name: BRIAN-PC Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7600) (7600.win7_rtm.090713-1255) Language: English (Regional Setting: English) System Manufacturer: Dell Inc System Model: XPS 630i BIOS: Phoenix - AwardBIOS v6.00PG Processor: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz (4 CPUs), ~2.3GHz Memory: 8192MB RAM Available OS Memory: 8190MB RAM Page File: 1855MB used, 14521MB available Windows Dir: C:\Windows DirectX Version: DirectX 11 DX Setup Parameters: Not found User DPI Setting: Using System DPI System DPI Setting: 96 DPI (100 percent) DWM DPI Scaling: Disabled DxDiag Version: 6.01.7600.16385 32bit Unicode DxDiag Previously: Crashed in DirectShow (stage 1). Re-running DxDiag with "dontskip" command line parameter or choosing not to bypass information gathering when prompted might result in DxDiag successfully obtaining this information ------------ DxDiag Notes ------------ Display Tab 1: No problems found. Sound Tab 1: No problems found. Sound Tab 2: No problems found. Sound Tab 3: No problems found. Input Tab: No problems found. -------------------- DirectX Debug Levels -------------------- Direct3D: 0/4 (retail) DirectDraw: 0/4 (retail) DirectInput: 0/5 (retail) DirectMusic: 0/5 (retail) DirectPlay: 0/9 (retail) DirectSound: 0/5 (retail) DirectShow: 0/6 (retail) --------------- Display Devices --------------- Card name: Manufacturer: Chip type: DAC type: Device Key: Enum\ Display Memory: n/a Dedicated Memory: n/a Shared Memory: n/a Current Mode: 1600 x 1200 (32 bit) (1Hz) Driver Name: Driver File Version: () Driver Version: DDI Version: unknown Driver Model: unknown Driver Attributes: Final Retail Driver Date/Size: , 0 bytes WHQL Logo'd: n/a WHQL Date Stamp: n/a Device Identifier: {D7B70EE0-4340-11CF-B123-B03DAEC2CB35} Vendor ID: 0x0000 Device ID: 0x0000 SubSys ID: 0x00000000 Revision ID: 0x0000 Driver Strong Name: Unknown Rank Of Driver: Unknown Video Accel: Deinterlace Caps: n/a D3D9 Overlay: n/a DXVA-HD: n/a DDraw Status: Not Available D3D Status: Not Available AGP Status: Not Available ------------- Sound Devices ------------- Description: Speakers (Realtek High Definition Audio) Default Sound Playback: Yes Default Voice Playback: Yes Hardware ID: HDAUDIO\FUNC_01&VEN_10EC&DEV_0888&SUBSYS_10280249&REV_1001 Manufacturer ID: 1 Product ID: 100 Type: WDM Driver Name: RTKVHD64.sys Driver Version: 6.00.0001.5667 (English) Driver Attributes: Final Retail WHQL Logo'd: n/a Date and Size: 8/18/2008 04:05:28, 1485592 bytes Other Files: Driver Provider: Realtek Semiconductor Corp. HW Accel Level: Basic Cap Flags: 0x0 Min/Max Sample Rate: 0, 0 Static/Strm HW Mix Bufs: 0, 0 Static/Strm HW 3D Bufs: 0, 0 HW Memory: 0 Voice Management: No EAX(tm) 2.0 Listen/Src: No, No I3DL2(tm) Listen/Src: No, No Sensaura(tm) ZoomFX(tm): No Description: Realtek Digital Output (Realtek High Definition Audio) Default Sound Playback: No Default Voice Playback: No Hardware ID: HDAUDIO\FUNC_01&VEN_10EC&DEV_0888&SUBSYS_10280249&REV_1001 Manufacturer ID: 1 Product ID: 100 Type: WDM Driver Name: RTKVHD64.sys Driver Version: 6.00.0001.5667 (English) Driver Attributes: Final Retail WHQL Logo'd: n/a Date and Size: 8/18/2008 04:05:28, 1485592 bytes Other Files: Driver Provider: Realtek Semiconductor Corp. HW Accel Level: Basic Cap Flags: 0x0 Min/Max Sample Rate: 0, 0 Static/Strm HW Mix Bufs: 0, 0 Static/Strm HW 3D Bufs: 0, 0 HW Memory: 0 Voice Management: No EAX(tm) 2.0 Listen/Src: No, No I3DL2(tm) Listen/Src: No, No Sensaura(tm) ZoomFX(tm): No Description: Realtek HDMI Output (Realtek High Definition Audio) Default Sound Playback: No Default Voice Playback: No Hardware ID: HDAUDIO\FUNC_01&VEN_10EC&DEV_0888&SUBSYS_10280249&REV_1001 Manufacturer ID: 1 Product ID: 100 Type: WDM Driver Name: RTKVHD64.sys Driver Version: 6.00.0001.5667 (English) Driver Attributes: Final Retail WHQL Logo'd: n/a Date and Size: 8/18/2008 04:05:28, 1485592 bytes Other Files: Driver Provider: Realtek Semiconductor Corp. HW Accel Level: Basic Cap Flags: 0x0 Min/Max Sample Rate: 0, 0 Static/Strm HW Mix Bufs: 0, 0 Static/Strm HW 3D Bufs: 0, 0 HW Memory: 0 Voice Management: No EAX(tm) 2.0 Listen/Src: No, No I3DL2(tm) Listen/Src: No, No Sensaura(tm) ZoomFX(tm): No --------------------- Sound Capture Devices --------------------- Description: Microphone (Realtek High Definition Audio) Default Sound Capture: Yes Default Voice Capture: Yes Driver Name: RTKVHD64.sys Driver Version: 6.00.0001.5667 (English) Driver Attributes: Final Retail Date and Size: 8/18/2008 04:05:28, 1485592 bytes Cap Flags: 0x0 Format Flags: 0x0 Description: Realtek Digital Input (Realtek High Definition Audio) Default Sound Capture: No Default Voice Capture: No Driver Name: RTKVHD64.sys Driver Version: 6.00.0001.5667 (English) Driver Attributes: Final Retail Date and Size: 8/18/2008 04:05:28, 1485592 bytes Cap Flags: 0x0 Format Flags: 0x0 ------------------- DirectInput Devices ------------------- Device Name: Mouse Attached: 1 Controller ID: n/a Vendor/Product ID: n/a FF Driver: n/a Device Name: Keyboard Attached: 1 Controller ID: n/a Vendor/Product ID: n/a FF Driver: n/a Device Name: ESA FW Update Attached: 1 Controller ID: 0x0 Vendor/Product ID: 0x0955, 0x000A FF Driver: n/a Poll w/ Interrupt: No ----------- USB Devices ----------- + USB Root Hub | Vendor/Product ID: 0x10DE, 0x026D | Matching Device ID: usb\root_hub | Service: usbhub | +-+ USB Input Device | | Vendor/Product ID: 0x0955, 0x000A | | Location: Port_#0002.Hub_#0001 | | Matching Device ID: generic_hid_device | | Service: HidUsb | | | +-+ HID-compliant device | | | Vendor/Product ID: 0x0955, 0x000A | | | Matching Device ID: hid_device | | +-+ USB Input Device | | Vendor/Product ID: 0x046D, 0xC01E | | Location: Port_#0003.Hub_#0001 | | Matching Device ID: generic_hid_device | | Service: HidUsb | | | +-+ HID-compliant mouse | | | Vendor/Product ID: 0x046D, 0xC01E | | | Matching Device ID: hid_device_system_mouse | | | Service: mouhid ---------------- Gameport Devices ---------------- ------------ PS/2 Devices ------------ + Standard PS/2 Keyboard | Matching Device ID: *pnp0303 | Service: i8042prt | + Terminal Server Keyboard Driver | Matching Device ID: root\rdp_kbd | Upper Filters: kbdclass | Service: TermDD | + Terminal Server Mouse Driver | Matching Device ID: root\rdp_mou | Upper Filters: mouclass | Service: TermDD ------------------------ Disk & DVD/CD-ROM Drives ------------------------ Drive: C: Free Space: 324.3 GB Total Space: 608.4 GB File System: NTFS Model: WDC WD64 00AAKS-75A7B SCSI Disk Device Drive: D: Free Space: 1.0 GB Total Space: 2.0 GB File System: NTFS Model: WDC WD64 00AAKS-75A7B SCSI Disk Device Drive: E: Model: TSSTcorp DVD+-RW TS-H653F SCSI CdRom Device Driver: c:\windows\system32\drivers\cdrom.sys, 6.01.7600.16385 (English), , 0 bytes -------------- System Devices -------------- Name: PCI standard PCI-to-PCI bridge Device ID: PCI\VEN_10DE&DEV_03B7&SUBSYS_000010DE&REV_A1\3&2411E6FE&1&18 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03AF&SUBSYS_02491028&REV_A1\3&2411E6FE&1&0A Driver: n/a Name: PCI standard host CPU bridge Device ID: PCI\VEN_10DE&DEV_03A3&SUBSYS_02491028&REV_A2\3&2411E6FE&1&00 Driver: n/a Name: NVIDIA nForce Serial ATA Controller Device ID: PCI\VEN_10DE&DEV_0267&SUBSYS_02491028&REV_A1\3&2411E6FE&1&78 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03B6&SUBSYS_02491028&REV_A1\3&2411E6FE&1&10 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03AE&SUBSYS_02491028&REV_A1\3&2411E6FE&1&09 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_0272&SUBSYS_02491028&REV_A3\3&2411E6FE&1&52 Driver: n/a Name: NVIDIA nForce Serial ATA Controller Device ID: PCI\VEN_10DE&DEV_0266&SUBSYS_02491028&REV_A1\3&2411E6FE&1&70 Driver: n/a Name: LSI 1394 OHCI Compliant Host Controller Device ID: PCI\VEN_11C1&DEV_5811&SUBSYS_02491028&REV_70\4&14591D7E&0&2880 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03B5&SUBSYS_02491028&REV_A1\3&2411E6FE&1&06 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03AD&SUBSYS_02491028&REV_A1\3&2411E6FE&1&08 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_0270&SUBSYS_02491028&REV_A2\3&2411E6FE&1&48 Driver: n/a Name: Standard Dual Channel PCI IDE Controller Device ID: PCI\VEN_10DE&DEV_0265&SUBSYS_02491028&REV_A1\3&2411E6FE&1&68 Driver: n/a Name: NVIDIA GeForce 9800 GT Device ID: PCI\VEN_10DE&DEV_0605&SUBSYS_062D10DE&REV_A2\4&4BABE2A&0&0028 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03B4&SUBSYS_02491028&REV_A1\3&2411E6FE&1&07 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03AC&SUBSYS_02491028&REV_A1\3&2411E6FE&1&01 Driver: n/a Name: PCI standard PCI-to-PCI bridge Device ID: PCI\VEN_10DE&DEV_026F&SUBSYS_CB8410DE&REV_A2\3&2411E6FE&1&80 Driver: n/a Name: NVIDIA nForce PCI System Management Device ID: PCI\VEN_10DE&DEV_0264&SUBSYS_02491028&REV_A3\3&2411E6FE&1&51 Driver: n/a Name: NVIDIA GeForce 9800 GT Device ID: PCI\VEN_10DE&DEV_0605&SUBSYS_062D10DE&REV_A2\4&10BD3C89&0&0018 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03B3&SUBSYS_02491028&REV_A1\3&2411E6FE&1&0E Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03AB&SUBSYS_02491028&REV_A1\3&2411E6FE&1&04 Driver: n/a Name: Standard Enhanced PCI to USB Host Controller Device ID: PCI\VEN_10DE&DEV_026E&SUBSYS_02491028&REV_A3\3&2411E6FE&1&59 Driver: n/a Name: PCI standard ISA bridge Device ID: PCI\VEN_10DE&DEV_0260&SUBSYS_02491028&REV_A3\3&2411E6FE&1&50 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03BC&SUBSYS_02491028&REV_A1\3&2411E6FE&1&11 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03B2&SUBSYS_02491028&REV_A1\3&2411E6FE&1&0D Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03AA&SUBSYS_02491028&REV_A1\3&2411E6FE&1&02 Driver: n/a Name: Standard OpenHCD USB Host Controller Device ID: PCI\VEN_10DE&DEV_026D&SUBSYS_02491028&REV_A3\3&2411E6FE&1&58 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03BA&SUBSYS_02491028&REV_A1\3&2411E6FE&1&12 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03B1&SUBSYS_02491028&REV_A1\3&2411E6FE&1&0C Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03A9&SUBSYS_02491028&REV_A1\3&2411E6FE&1&03 Driver: n/a Name: High Definition Audio Controller Device ID: PCI\VEN_10DE&DEV_026C&SUBSYS_02491028&REV_A2\3&2411E6FE&1&81 Driver: n/a Name: PCI standard PCI-to-PCI bridge Device ID: PCI\VEN_10DE&DEV_03B8&SUBSYS_000010DE&REV_A1\3&2411E6FE&1&28 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03B0&SUBSYS_02491028&REV_A1\3&2411E6FE&1&0B Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03A8&SUBSYS_02491028&REV_A2\3&2411E6FE&1&05 Driver: n/a Name: NVIDIA nForce Networking Controller Device ID: PCI\VEN_10DE&DEV_0269&SUBSYS_02491028&REV_A3\3&2411E6FE&1&A0 Driver: n/a --------------- EVR Power Information --------------- Current Setting: {5C67A112-A4C9-483F-B4A7-1D473BECAFDC} (Quality) Quality Flags: 2576 Enabled: Force throttling Allow half deinterlace Allow scaling Decode Power Usage: 100 Balanced Flags: 1424 Enabled: Force throttling Allow batching Force half deinterlace Force scaling Decode Power Usage: 50 PowerFlags: 1424 Enabled: Force throttling Allow batching Force half deinterlace Force scaling Decode Power Usage: 0

    Read the article

  • CVSROOT problem because of username string

    - by jatanp
    Hi, I have always been SVN user but currently I have to use CVS as the source repository. I am quite new to CVS and really got confused many a times (reason being I always tried to access CVS like SVN !) However now I am really stuck in one problem wherein I am not able to do any cvs operations through cygwin. Actually I have checked out the code using WinCVS and while doing that it created the CVSROOT as following, :pserver;username=<user_name>;password=<pwd>:<serverip>:/cvs/repository However whenever I try to use cvs command in cygwin (after setting CVSROOT variable using export) it fails with following error: cvs update: Unknown option (`username') in CVSROOT. cvs update: in directory .: cvs update: ignoring CVS/Root because it does not contain a valid root. cvs update: Unknown option (`username') in CVSROOT. cvs [update aborted]: Bad CVSROOT: `:pserver;username=<user_name>;password=<pwd>:<serverip>:/cvs/repository'. However the command works fine, if invoked through dos command prompt. I got to know that on DOS prompt, cvs command is provided by CVSNT whereas in cygwin it's some different package. Please let me know where I have made a mistake and how it can be corrected ! I need cvs to work inside cygwin for some scripting purpose.

    Read the article

  • IIS 7.5 Basic authorization issue

    - by Alsin
    When I log on using correct user name\password (I always copy-paste them) I get 401.1 error. User name and password are correct (user is created on server locally, not a domain one). I can run program as this user (runas /noprofile /user:tmp notepad.exe). Basic authorization's default domain is a server name, realm is empty. I've saved FailedReqLogFile. AUTH_BASIC_LOGON_FAILED shows ErrorCode="Logon failure: unknown user name or bad password. (0x8007052e)" and MODULE_SET_RESPONSE_ERROR_STATUS shows ModuleName="BasicAuthenticationModule", Notification="AUTHENTICATE_REQUEST", HttpStatus="401", HttpReason="Unauthorized", HttpSubStatus="1", ErrorCode="Logon failure: unknown user name or bad password. (0x8007052e)", ConfigExceptionInfo="" And one more thing - if I use my domain login\password it woks! Basic Authentications is only enabled authentication in application... Could you please suggest me how I can troubleshoot and fix this issue? Maybe somebody hit it before... Best regards, Alex UPDATE: I get 401.1 when I trying to access site from local host. I can actually access files from remote host.

    Read the article

  • Uninstall php5 installed from source.

    - by diegomichel
    I have tried to install php5 from source , and it worked... Then for some reason need to install the official packets, so i tried a make uninstall and for my surprise there is such make uninstall... so i tried delete all the installed files by hand. Then installed the official debian packages and it worked fine... till i need install sqlite module, which give me the following error: php --version PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php5/20090626/pdo_sqlite.so' - /usr/lib/php5/20090626/pdo_sqlite.so: undefined symbol: php_pdo_register_driver in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php5/20090626/sqlite.so' - /usr/lib/php5/20090626/sqlite.so: undefined symbol: php_pdo_register_driver in Unknown on line 0 PHP 5.3.1-5 with Suhosin-Patch (cli) (built: Feb 22 2010 22:46:05) Copyright (c) 1997-2009 The PHP Group Zend Engine v2.3.0, Copyright (c) 1998-2009 Zend Technologies So i remember that manual install i did, and i think there is some old lib installed causing that problem, the bad thing is that there is not such make uninstall on the source code of php5... php-5.2.13 > make uninstall make: *** No rule to make target `uninstall'. Stop. I have tried reinstall and purge all php related packages via aptitude with not success. OS: Debian Squeeze. uname -a Linux desktop 2.6.32-trunk-amd64 #1 SMP Sun Jan 10 22:40:40 UTC 2010 x86_64 GNU/Linux Any idea how to fix that?

    Read the article

  • ssh_exchange_identification: Connection closed by remote host

    - by Charlie Epps
    First: $ ssh-keygen -t dsa -P '' -f ~/.ssh/id_dsa $ cat ~/.ssh/id_dsa.pub >> ~/.ssh/authorized_keys Connecting to SSH servers gives this message: $ ssh -vvv localhost OpenSSH_5.3p1, OpenSSL 0.9.8m 25 Feb 2010 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to localhost [127.0.0.1] port 22. debug1: Connection established. debug1: identity file /home/charlie/.ssh/identity type -1 debug1: identity file /home/charlie/.ssh/id_rsa type -1 debug3: Not a RSA1 key file /home/charlie/.ssh/id_dsa. debug2: key_type_from_name: unknown key type '-----BEGIN' debug3: key_read: missing keytype debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug2: key_type_from_name: unknown key type '-----END' debug3: key_read: missing keytype debug1: identity file /home/charlie/.ssh/id_dsa type 2 ssh_exchange_identification: Connection closed by remote host My /etc/hosts.allow is as following: sshd: ALLOW /etc/hosts.deny is as following: ALL: ALL: DENY I have changed my /etc/ssh/sshd_conf as following: ListenAddress 0.0.0.0 Protocol 2 # HostKey for protocol version 1 #HostKey /etc/ssh/ssh_host_key # HostKeys for protocol version 2 HostKey /etc/ssh/ssh_host_rsa_key HostKey /etc/ssh/ssh_host_dsa_key RSAAuthentication yes PubkeyAuthentication yes #AuthorizedKeysFile .ssh/authorized_keys PasswordAuthentication no

    Read the article

  • External Hard Drive Won't Mount - MAC OSX

    - by dtj
    I have a Western Digital hard drive that's about 4 or 5 years old. It's 500 GB, USB. I use it to backup my Mac every so often. I had it partitioned: 1 side for full backups, and the other side for general storage of music, installers, etc. I decided to get rid of the partition today and dump all the data. So I opened disk utility, and hit 'erase'. It started thinking and then disk utility crashed. After the crash, the hard drive won't mount, however disk utility still sees the drive, but not the individual volume within. I tried booting up Disk Warrior and no luck there either. It has the drive as an "unknown drive". When I hit rebuild, it goes through all it steps and then stops cause of this error: The drive "unknown" is severely damaged and DiskWarrior is unable to determine its case sensitivity What can I do at this point? There isn't any physical damage to the drive. Never been dropped or anything.

    Read the article

  • Trying to install ffmpeg-php and having installation issues.

    - by dallasclark
    I've installed ffmpeg successfully using the ffmpeginstaller 3 series (http://www.ffmpeginstaller.com/download). ffmpeg is working fine without any known issues with bash. The ffmpeginstaller is meant to install ffmpeg-php but it cannot be found and I receive an error when I execute php -v PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib64/php/modules/ffmpeg.so' - /usr/lib64/php/modules/ffmpeg.so: cannot open shared object file: No such file or directory in Unknown on line 0 Looking at the '/usr/lib64/php/modules/' folder, it doesn't contain the ffmpeg.so file. I've tried to install ffmpeg-php manually but I receive the following error checking for ffmpeg headers... configure: error: ffmpeg headers not found. Make sure you've built ffmpeg as shared libs using the --enable-shared option Should I install ffmpeg with series 4 or 5 of ffmpeginstaller or does someone know how to fix this issue? Thanks in advance ! System Specs cat /etc/redhat-release CentOS release 5.5 (Final) cat /proc/version Linux version 2.6.18-028stab068.5 (root@rhel5-64-build) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-14)) #1 php -v PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib64/php/modules/ffmpeg.so' - /usr/lib64/php/modules/ffmpeg.so: cannot open shared object file: No such file or directory in Unknown on line 0 PHP 5.2.13 (cli) (built: Mar 2 2010 18:08:48) Copyright (c) 1997-2010 The PHP Group Zend Engine v2.2.0, Copyright (c) 1998-2010 Zend Technologies Any other details you need, just let me know.

    Read the article

  • mysqld_safe Can't log to error log and syslog at the same time. Remove all --log-error configuration options for --syslog to take effect

    - by photon
    When I'm trying to install MySQL 5.5 community edition on my Ubuntu 10.04 by compiling the source code, I met the following problem: $ fg % 1 sudo ../bin/mysqld_safe --basedir=/usr/local/mysql_community_5.5/data --user=mysql --defaults-file=/etc/my.cnf [sudo] password for linnan: Sorry, try again. [sudo] password for linnan: 121023 09:26:21 mysqld_safe Can't log to error log and syslog at the same time. Remove all --log-error configuration options for --syslog to take effect. Internal program error (non-fatal): unknown logging method '/usr/local/mysql_community_5.5/log/mysql.log' 121023 09:26:21 mysqld_safe Logging to '/var/log/mysql/error.log'. Internal program error (non-fatal): unknown logging method '/usr/local/mysql_community_5.5/log/mysql.log' 121023 09:26:22 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql 121023 09:26:23 mysqld_safe mysqld from pid file /var/lib/mysql/ubuntu.pid ended It seems that the problem is related to log configuration. I've noticed a bugfix related to this problem: http://bugs.mysql.com/bug.php?id=50083 But I still have no idea how to solve it. The relative content in /etc/my.cnf: [mysqld] port = 3306 socket = /tmp/mysql.sock skip-external-locking key_buffer_size = 384M max_allowed_packet = 1M table_open_cache = 512 sort_buffer_size = 2M read_buffer_size = 2M read_rnd_buffer_size = 8M myisam_sort_buffer_size = 64M thread_cache_size = 8 query_cache_size = 32M # Try number of CPU's*2 for thread_concurrency thread_concurrency = 8 character-set-server=utf8 [mysqld-safe] basedir=/usr/local/mysql_community_5.5 datadir=/usr/local/mysql_community_5.5/data mysqld_safe_syslog.cnf: /etc/mysql/conf.d/mysqld_safe_syslog.cnf: [mysqld_safe] syslog

    Read the article

  • How to install VMware tools for Ubuntu 11.04 hosted on VMware ESXi?

    - by Dmitri Toubelis
    I'm running Vmware ESX 4.1 and I have a development VM that I recently upgraded from Ubuntu 10.04 to 11.04. Then I tried to re-install VMware Tools and some of the modules gave me an error and would not compile. As a result I'm having problems with backing up this virtual machine now and I suspect VMware tools is the reason. I installed latest patches for VMware host, that included an update to VMware Tools (v8.3.7 build-381511) but I'm still getting the same error. The error I'm getting is like this: ... /tmp/vmware-root/modules/vmhgfs-only/super.c:73:4: error: unknown field \u2018clear_inode\u2019 specified in initializer make[2]: *** [/tmp/vmware-root/modules/vmhgfs-only/super.o] Error 1 make[1]: *** [_module_/tmp/vmware-root/modules/vmhgfs-only] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-2.6.38-8-generic' make: *** [vmhgfs.ko] Error 2 make: Leaving directory `/tmp/vmware-root/modules/vmhgfs-only' and also this: /tmp/vmware-root/modules/vmci-only/vmci_drv.c:91:4: error: unknown field \u2018ioctl\u2019 specified in initializer /tmp/vmware-root/modules/vmci-only/vmci_drv.c:91:4: warning: initialization from incompatible pointer type /tmp/vmware-root/modules/vmci-only/vmci_drv.c: In function \u2018vmci_init\u2019: /tmp/vmware-root/modules/vmci-only/vmci_drv.c:151:4: error: implicit declaration of function \u2018init_MUTEX\u2019 make[2]: *** [/tmp/vmware-root/modules/vmci-only/vmci_drv.o] Error 1 make[1]: *** [_module_/tmp/vmware-root/modules/vmci-only] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-2.6.38-8-generic' make: *** [vmci.ko] Error 2 make: Leaving directory `/tmp/vmware-root/modules/vmci-only' Any ideas?

    Read the article

  • Different routing rules for a particular user using firewall mark and ip rule

    - by Paul Crowley
    Running Ubuntu 12.10 on amd64. I'm trying to set up different routing rules for a particular user. I understand that the right way to do this is to create a firewall rule that marks the packets for that user, and add a routing rule for that mark. Just to get testing going, I've added a rule that discards all packets as unreachable: # ip rule 0: from all lookup local 32765: from all fwmark 0x1 unreachable 32766: from all lookup main 32767: from all lookup default With this rule in place and all firewall chains in all tables empty and policy ACCEPT, I can still ping remote hosts just fine as any user. If I then add a rule to mark all packets and try to ping Google, it fails as expected # iptables -t mangle -F OUTPUT # iptables -t mangle -A OUTPUT -j MARK --set-mark 0x01 # ping www.google.com ping: unknown host www.google.com If I restrict this rule to the VPN user, it seems to have no effect. # iptables -t mangle -F OUTPUT # iptables -t mangle -A OUTPUT -j MARK --set-mark 0x01 -m owner --uid-owner vpn # sudo -u vpn ping www.google.com PING www.google.com (173.194.78.103) 56(84) bytes of data. 64 bytes from wg-in-f103.1e100.net (173.194.78.103): icmp_req=1 ttl=50 time=36.6 ms But it appears that the mark is being set, because if I add a rule to drop these packets in the firewall, it works: # iptables -t mangle -A OUTPUT -j DROP -m mark --mark 0x01 # sudo -u vpn ping www.google.com ping: unknown host www.google.com What am I missing? Thanks!

    Read the article

  • Sender's Sendmail says "stat=Sent" but recipent doesn't receive the message

    - by user44774
    Guys, I am trying to figure out why sendmail is saying that it sends out an email but I actually never get it. This is from the logs when the email is being sent out: I have replaced the email address with some fake address and I have also replaced the name of the server with a fake hostname. The most significant point of this information from the logs is that it shows that the "Message was accepted for delivery". Do you guys have any suggestions as to why it seems like the message goes out but I never get the actual email? Jun 2 14:34:40 server sendmail[9668]: o52IYeSi009668: --- 250 2.0.0 o52IYeSi009668 Message accepted for delivery Jun 2 14:34:40 server sendmail[9667]: o52IYe9I009667: [email protected], ctladdr=rick (500/500), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=30058, relay=[127.0.0.1] [127.0.0.1], dsn=2.0.0, stat=Sent (o52IYeSi009668 Message accepted for delivery) Jun 2 14:34:40 server sendmail[9668]: o52IYeSj009668: <-- QUIT Jun 2 14:34:40 server sendmail[9668]: o52IYeSj009668: --- 221 2.0.0 server.server.com closing connection Jun 2 14:34:41 server sendmail[9670]: o52IYeSi009668: SMTP outgoing connect on [192.168.1.9] Jun 2 14:34:41 server sendmail[9670]: o52IYeSi009668: to=<[email protected]>, ctladdr=<[email protected]> (500/500), delay=00:00:01, xdelay=00:00:01, mailer=relay, pri=120368, relay=mailhost.worldnet.att.net. [207.115.11.17], dsn=5.1.1, stat=User unknown Jun 2 14:34:42 server sendmail[9670]: o52IYeSi009668: o52IYgSi009670: DSN: User unknown Jun 2 14:34:42 server sendmail[9670]: o52IYgSi009670: to=<[email protected]>, **delay=00:00:00, xdelay=00:00:00, mailer=local, pri=31625, dsn=2.0.0,** ***stat=Sent*****

    Read the article

  • DNS configuration issues. Clients inside network unable to resolve DNS server's name

    - by hydroparadise
    Setup the DNS service on Ubuntu 12.04 64 and all apears to be well except that my dhcp clients do not recognize my DNS servers hostname. When doing a nslookup on one of my Windows clients, I get C:\Users\chad>nslookup Default Server: UnKnown Address: 192.168.1.2 Where I would expect the FQDN in the spot where UnKnown is seen. The DNS server know's itself pretty well, but I think only because I have an entry in the /etc/hosts file to resolve. There's so many places to look I don't even know where to begin. Are there any logs I can look at? Something. Places I've looked at and configured: /etc/bind/zones/domain.com.db /etc/bind/zones/rev.1.168.192.in-addr.arpa /etc/bind/named.conf.local EDIT: '/etc/bind/zones/rev.1.168.192.in-addr.arpa' @ IN SOA dns-serv1.mydomain.com [email protected]. ( 2006081401; 28800; 604800; 604800; 86400 ) IN NS dns-serv1.mydomain.com. 2 IN PTR dns-serv1 2 IN PTR mydomain.com EDIT 2: '/etc/bind/named.conf.local' zone "mydomain.com" { type master; file "/etc/bind/zones/mydomain.com.db"; }; zone "1.168.192.in-addr.arpa" { type master; file "/etc/bind/zones/rev.0.168.192.in-addr.arpa"; };

    Read the article

  • Mac OS X Client With Static DHCP Assignment Requests Wrong IP via Option 50

    - by Starchy
    I have a number of Mac (and a few Linux) laptops getting DHCP from a Force10 layer 3 switch, the only DHCP server on the subnet. There's a global dynamic pool, and for each full-time employee's laptop I have a single IP static pool set by MAC address. One and only one of the clients, running OS X 10.7.5, consistently fails to get a static assignment. The MAC address in the static pool definition has been carefully re-checked. Running tcpdump on a mirrored port when the laptop connects, I see that it is specifically requesting 10.100.0.252 (a dynamic address): 11:32:10.108280 IP (tos 0x0, ttl 255, id 28293, offset 0, flags [none], proto UDP (17), length 328) 0.0.0.0.bootpc > broadcasthost.bootps: [udp sum ok] BOOTP/DHCP, Request from 3c:07:54:xx:xx:xx (oui Unknown), length 300, xid 0x1399da89, Flags [none] (0x0000) Client-Ethernet-Address 3c:07:54:xx:xx:xx (oui Unknown) Vendor-rfc1048 Extensions Magic Cookie 0x63825363 DHCP-Message Option 53, length 1: Request Parameter-Request Option 55, length 9: Subnet-Mask, Default-Gateway, Domain-Name-Server, Domain-Name Option 119, LDAP, Option 252, Netbios-Name-Server Netbios-Node MSZ Option 57, length 2: 1500 Client-ID Option 61, length 7: ether 3c:07:54:xx:xx:xx Requested-IP Option 50, length 4: 10.100.0.252 Lease-Time Option 51, length 4: 7776000 Hostname Option 12, length 10: "host-name" END Option 255, length 0 PAD Option 0, length 0, occurs 8 I haven't been able to find any extra system prefs or unusual software on the laptop. Disabling the interface and rebooting or temporarily setting the IP manually both fail to make any difference. Any suggestions appreciated.

    Read the article

  • check_snmp with snmpv3 protocol giving "Unkown Report message" error

    - by John
    I'm trying to add a nagios command to use snmpv3 for monitoring printer status messages. When using the check_snmp command, I get the following error: External command error: snmpget: Unknown Report message Here is the command I'm typing in: ./check_snmp -P 3 -H <hostname> -L authPriv -U snmpuser -A snmppassword -X snmppassword -o 1.3.6.1.4.1.11.2.4.3.1.2.0 -C public -d "STRING:" -a MD5 These values for auth key, private key, username, etc all work when using snmpwalk. Can someone enlighten me as to what that error message really means? EDIT: It looks like check_snmp isn't taking my v3 credentials when passing over to snmpget. Here is my input with the verbose option: ./check_snmp -H <hostname> -o 1.3.6.1.2.1.2.2.1.10.1 -C public -m ALL -P 3 -L authPriv -U snmpuser -a MD5 -A snmppassword -x DES -X snmppassword -v And here is the output: /usr/bin/snmpget -t 1 -r 5 -m ALL -v 3 [authpriv] <hostname>:161 1.3.6.1.2.1.2.2.1.10.1 External command error: snmpget: Unknown Report message So I guess now my question would be: why isn't check_snmp passing all the commandline options to snmpget?

    Read the article

  • "The directory name is invalid" when trying to install drivers in Windows 7 via Device Manager

    - by Luke
    First off, this computer is not mine, it's a customer's system. Having said that... The hard drive was moved to a new motherboard, CPU, RAM combo, and booted up fine. Customer puts in driver CD, drivers won't load. He brings it into me. Under Device Manager for Windows 7 x64, I see lots of PCI to PCI bridge, one SMBus Controller, and about 20 Unknown Devices. Greeeeeat... So I start with the SMBus driver directly from the Asus website for the motherboard (P8H77-M Pro). If I install from the setup program, it tells me to reboot, then it starts the install. It gets half way through the setup, then fails (An unknown error occurred. Setup will exit). When I try to point to the folder from Device Manager, it starts copying files for the driver, even presents me with the proper name of the device, but says that an error has occurred there as well: The directory name is invalid. Doing some Googling, I saw that many people had this issue with Vista. K, Vista and 7 are similar, maybe the solutions are the same... But they aren't. I tried: Copying the entire driver folder and setup utility to the Program Files folder and running it / selecting it in DM Downloading another set of drivers in case this one is corrupt Disabling UAC Deleting and recreating the %WINDIR%\TEMP folder Removing all references to previous hardware that I could find, even in Device Manager's hidden mode So far, nothing has worked. A wipe and reload will be out of the question

    Read the article

  • Switch Windows 8 from a hybrid MBR/GPT => GPT only on Macbook Pro Retina

    - by Sid
    I used DiskUtility+Bootcamp Wizard to setup my hard drive for Windows 8 (final MSDN). Somewhere in that process, the Apple tools turned my GPT disk into a hybrid MBR/GPT. All my 4 primary MBR partitions are used up, so when I try turning on Bitlocker in Windows 8, it complains about not finding a System drive. I know on Windows 8 the Bitlocker setup tries to create the 200(?)MB system partition if it's missing. However with all 4 partitions filled I suspect it can't create system drive = it can't find it = throws back an error like "BitLocker Setup could not find a target system drive. You may need to manually prepare your drive for BitLocker". I've already tried disabling hibernation, swap file etc. Now I'm thinking that if I were to get rid of the MBR scheme altogether, perhaps I can be alright within the GPT world without MBR's 4 primary partitions limit. So, how can I get rid of the MBR tables on the hybrid scheme in a manner that still leaves Mac OS and Windows 8 in working conditions? Details: Hardware is the MacbookPro Retina. Primary MBR partitions are consumed as follows: EFI partition HFS+ partition (=encrypted, therefore ="Apple_CoreStorage") HFS+ partition (Recovery partition, contains unencrypted Mac bootloader) NTFS partition (Windows8 all-in-one partition) diskutil list output sid-mbpr:~ sid$ diskutil list /dev/disk0 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *251.0 GB disk0 1: EFI 209.7 MB disk0s1 2: Apple_CoreStorage 160.0 GB disk0s2 3: Apple_Boot Recovery HD 650.0 MB disk0s3 4: Microsoft Basic Data Win8 90.1 GB disk0s4 GPT vs MBR addresses sid-mbpr:~ sid$ sudo gptsync /dev/rdisk0 Password: Current GPT partition table: # Start LBA End LBA Type 1 40 409639 EFI System (FAT) 2 409640 312909639 Unknown 3 312909640 314179175 Mac OS X Boot 4 314179584 490233855 Basic Data Current MBR partition table: # A Start LBA End LBA Type 1 1 409639 ee EFI Protective 2 409640 312909639 ac Apple RAID 3 312909640 314179175 ab Mac OS X Boot 4 * 314179584 490233855 07 NTFS/HPFS Status: GPT partition of type 'Unknown' found, will not touch this disk.** **: Ignore this message, the gptsync tool is old and doesn't understand the UUID for "Apple_CoreStorage" / FileVault2 partitions. Since LBA addresses are alright, safe to ignore this message.

    Read the article

  • DNS server not working?

    - by Behrooz A
    I just set up a DNS Server on my windows 7, called SimpleDNS I added a zone for example sag.com and defined www.sag.com and sag.com to 192.168.1.2 (my Network IP Address) . the problem is when I try to ping sag.com the SimpleDNS logs says that it answered the request with 192.168.1.2 , but the ping doesn't resolve anything . SimpleDNS logs: > 14:00:43 Request from 192.168.1.2 for A-record for www.sag.com > 14:00:43 Sending reply to 192.168.1.2 about A-record for > www.sag.com: 14:00:43 -> Answer: A-record for www.sag.com = > 192.168.1.2 14:00:43 -> Authority: NS-record for www.sag.com = mehr-pc nslookup : > C:\Users\Mehr\Desktop>nslookup www.sag.com DNS request timed out. > timeout was 2 seconds. Server: UnKnown Address: 192.168.1.1 > > DNS request timed out. > timeout was 2 seconds. DNS request timed out. > timeout was 2 seconds. DNS request timed out. > timeout was 2 seconds. DNS request timed out. > timeout was 2 seconds. > *** Request to UnKnown timed-out the DNS server IP is 192.168.1.2 , and Access point address : 192.168.1.1 what should I do?

    Read the article

  • DNS server not working?

    - by Behrooz A
    I just set up a DNS Server on my windows 7, called SimpleDNS I added a zone for example sag.com and defined www.sag.com and sag.com to 192.168.1.2 (my Network IP Address) . the problem is when I try to ping sag.com the SimpleDNS logs says that it answered the request with 192.168.1.2 , but the ping doesn't resolve anything . SimpleDNS logs: > 14:00:43 Request from 192.168.1.2 for A-record for www.sag.com > 14:00:43 Sending reply to 192.168.1.2 about A-record for > www.sag.com: 14:00:43 -> Answer: A-record for www.sag.com = > 192.168.1.2 14:00:43 -> Authority: NS-record for www.sag.com = mehr-pc nslookup : > C:\Users\Mehr\Desktop>nslookup www.sag.com DNS request timed out. > timeout was 2 seconds. Server: UnKnown Address: 192.168.1.1 > > DNS request timed out. > timeout was 2 seconds. DNS request timed out. > timeout was 2 seconds. DNS request timed out. > timeout was 2 seconds. DNS request timed out. > timeout was 2 seconds. > *** Request to UnKnown timed-out the DNS server IP is 192.168.1.2 , and Access point address : 192.168.1.1 what should I do?

    Read the article

< Previous Page | 52 53 54 55 56 57 58 59 60 61 62 63  | Next Page >