Search Results

Search found 2177 results on 88 pages for 'wifi'.

Page 56/88 | < Previous Page | 52 53 54 55 56 57 58 59 60 61 62 63  | Next Page >

• Broadcom 4365 wireless driver with 3.4 / 3.5 kernel

  - by zaid

  I used this package to install the driver on 3.2 Kernel and it was working perfectly. Unfortunately the system used to freeze randomly with 3.2 kernel so I installed 3.4 kernel, now there is no freezing, the only problem is that my wifi card is not working, I tried to re-install the package, but didn't work. I can see the driver in the "additional drivers" and it say that it is active, but when I execute iwconfig it doesn't show up. I've even tried ndiswraper and that didn't work either. my lspci: 01:00.0 Network controller: Broadcom Corporation Device 4365 (rev 01)

  Read the article

• How to share my wireless connection to other wireless devices

  - by user89464

  I am aware that I can share my wired internet connection to other devices wirelessly, but what I need now is a little more complex. I am limited to one device over the wifi but would like my macbook to have internet as well. It's in another room so ethernet is not really an option. I really would like to share the wireless from my ubuntu (it's on more) to other wireless devices. After some light googling I can't find anything even remotely useful as they all involve an ethernet cable at some point. Has anyone here had any luck with anything similar? I am running 12.04 LTS just for reference and have a Belkin G wireless USB device. If anyone knows a possible procedure I can find out about the chipset etc. if needed. I understand there may be hardware limitations.

  Read the article

• Ubuntu 12.04 LTS Realtek RTL8192E Problems

  - by Logan

  My wifi is not working. I have tried ndiswrapper with the XP driver but that still did not work. Please explain to me in layman's terms. I can run commands so if you tell me exactly what to put, i will put it. Basically, ubuntu is not showing a wireless networks option and when I ran some command yesterday it said the driver was UNCLAIMED. Please help. This is a wintec card with realtek rtl8192E chip on it. It is a desktop computer. On a 20gb partition, other 60gb is for windows(yeah its an old desktop). Use windows installer to install ubuntu(this is one of the dell desktops that wont boot ubuntu from disk). So any help is appreciated and I would like to get this done THIS weekend.

  Read the article

• toshiba c800 Fn keys not working

  - by Nirjon Nj

  i am a new born baby in Ubuntu family. And i am really loving it. but i am having few issues which are rally annoying.Please help me to remain in this family. my Toshiba C800 laptop(12.04lts desktop) has special Fn keys as followed Fn+ F2-BRIGHTNESS DOWN F3-BRIGHTNESS UP F4-DISPLAY SELECT F5-TOUCH PAD on/off F6-PREVIOUS F7-PLAY/PAUSE F8-NEXT F9-VOLUME DOWN F10-VOLUME F11-MUTE F12-WiFi on/off now the problem is keys are working fine from F6 to F11(media player keys, i may say) but the keys from F2 to F5 and F12(setting change keys) are not working. please help me. i really liked ubuntu!!

  Read the article

• Connection manager detects network but won't connect

  - by Carson Chittom

  I've just installed 12.04 on my home desktop. Because of where it's located, in order not to have my children tripping over cat5 cable, I've got a cheap 802.11n USB device plugged in, which uses a Realtek 8192CU chip. The house wifi is protected with WPA2. Ubuntu's Network Manager detects the network, but connecting to it just times out and asks for the password again. I'm sure I'm using the correct password. No other computers on the house network are having any difficulty. This device previously worked correctly with both Windows 7 and OpenBSD in the same machine. The linux-firmware package is installed (from the disc) at version 1.79, and /lib/firmware/rtlwifi/rtl8192cufw.bin is present. dmesg|grep rtl only shows the "loading firmware" message. I've tried Google, but I apparently can't find the right set of words to plug in, because I haven't found anything related (lots of "doesn't work at all," but nothing matching my circumstances). Any help would be greatly appreciated.

  Read the article

• Wireless speed drops over time and doesn't get up if not reconnected

  - by Vili Lehto

  I am using Ubuntu 12.10 64bit and I have a Asus PCE-N15 wireless card(in PCI-E slot). The problem is that first when I connect to my WiFi network the speed is just fine, and actually my link speed never drops, it shows a solid 150mb/s+ link speed and good signal. But the download and upload speeds drop dramatically after couple minutes of use and I have to reconnect to fix this. Network is type IEEE 802.11bgn and uses WPA2/AES encryption. I don't have similar problems on the windows side, and the network is working fine on every other device. iwconfig shows this: wlan0 IEEE 802.11bgn ESSID:"WLAN-AP" Mode:Managed Frequency:2.412 GHz Access Point: 00:1E:AB:05:EF:31 Bit Rate=300 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr=2347 B Fragment thr:off Encryption key:off Power Management:off Link Quality=61/70 Signal level=-49 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:2 Missed beacon:0 So the question is: Is there a way to fix this? Thanks in advance.

  Read the article

• Ubuntu on Thinkpad Edge 11/13/14/15

  - by lasseespeholt

  I think a community wiki on problems (and solutions) when installing Ubuntu (10.10) on a Thinkpad Edge 11 would be nice (because I just got one ;)). I'll contribute with my own problems and solutions, and hope others will join too. Thinkwiki entry for the Edge 11 Known problems: No wifi-driver, solution: answer #1, answer #2 Fan is loud, even though it's on auto. No solution. Thinkfan is a possible solution, but correction values for sensors should be supplied (mapping sensors to specific areas). Also, one sensor is between -100C and +100C - maybe some kind of deactivation would help. FN keys stop working: see below. No sound on headphones: see below.

  Read the article

• Configuring bind9 views so I can have DNS services?

  - by Cesar Downs

  I want to configure bind9 using the Ubuntu terminal to have the DNS resolve a local name, not a domain name. For example, if I type in Nicole it will resolve my IP address in a local network fashion. How can I do this, step-by-step please? I've already installed bind9 using: sudo apt-get install bind9 It's fully installed now, I just need some help configuring. Should I be using local views? I am going to do the connection with two laptops probably connected to each other by Ethernet cable or WIFI. One of them is running Ubuntu and the other is running Windows. I not sure if that's part of the problem.

  Read the article

• Menu bars are a basic light gray after installing graphics card driver. [closed]

  - by Jonathan

  Possible Duplicate: Desktop forgets theme? Hi, I've just installed Ubuntu 10.10 64-bit. It came up saying I could install 2 proprietary drivers, one for my WiFi adapter (which works perfectly) and one for my graphics card - a Sapphire AIT Radeon HD 5770 1024MB GDDR5 PCI-Express Graphics Card. The driver is called ATI/AMD proprietary FGLRX graphics driver. Before installing this driver I was unable to have Extra Visual Effects in Appearances. However after installing (and restarting) the menu bars are now in a basic light gray mode, rather than the sleek Ubuntu black. - Although Extra Visual Effects does now work. I've tried rebooting, and I've had a look around in ATI "Catalyst Control Center" but nothing has worked so far. Does anybody know what this windows mode is, how to change it back to normal and why it's doing it in the first place? Below is a screenshot of my computer: (This is also the first time I've installed Ubuntu on my computer, and am keen for it to work.)

  Read the article

• iwconfig usage for WEP access point?

  - by johan elmander

  I would like to use my wifi doggle in my pc (ubuntu 12.04). I am able to connect to my access point through the GUI. I would like to do the same in the terminal. My access point uses WEP. So I typed the following commands iwconfig wlan0 mode managed key 6d6f6e6579 iwconfig wlan0 essid "AccessPoint" dhclient wlan0 after typing dhclient wlan0 it waits like 1-2 min then outputs nothing and cannot connect to the Access Point. iwconfig output: wlan0 IEEE 802.11bgn ESSID:"AccessPoint" Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm Retry long timit:7 RTS thr=2347 B Fragment thr:off Encryption key:6D6F-6E65-79 Power Management:off I would appreciate any suggestion

  Read the article

• wireless driver error after install

  - by James

  after following this command to update wifi drivers:1- Boot into Ubuntu 2- Open a terminal by pressing Ctrl+Alt+T 3- Type in the following (verbatim!) sudo apt-get update && sudo apt-get upgrade press Enter, the command will prompt for your password (the one you use to login into Ubuntu), type it and press Enter. Wait for it to finish updating your system. Now type: sudo apt-get remove bcmwl-kernel-source sudo apt-get install firmware-b43-installer Wait for the command to finish installing the driver, when done restart your computer. i get a message after the first command when installing has done saying not enough space so it aborts! what do i do to fix this

  Read the article

• How to check last changes in filesystem or directory with bash?

  - by Robert Vila

  After the system unmounted the root partition I detected that some files are missing in the filesystem. wifi and the gwibber icons disappeared from the indicator applet I want to check if there are other files missing using the ls program and the locate program, which woks on indexes of a previous state of the filesystem. Thus, locate '/usr/share/icons/*' | xargs ls -d 2>&1 >/dev/null serves for that purpose, and I can count the nonexistent files like this: locate '/usr/share/icons/*' | xargs ls -d 2>&1 >/dev/null | wc -l except for the case where filenames have blank spaces in them; and, not very surprisingly, that is the case with Ubuntu (OMG!! It is no longer "forbidden" like in good old times). If I use: locate '/usr/share/icons/*' | xargs -Iñ ls -d 'ñ' 2>&1 >/dev/null it is not working because there is some kind of interference in the syntax between the redirections of the standard outputs and the use of the parameter -I. Can anyone please help me with this syntax or giving another idea?

  Read the article

• Wireless does not work anymore after software update with Ubuntu 12.10 on a Dell Latitude E6230

  - by Andy

  I just installed Ubuntu 12.10 on my DELL Latitude E6230, on first boot wifi worked properly but when I updated the software it stopped working. I can't figure out the problem... The wireless network controller is a Broadcom Corporation BCM4313 802.11b/g/n Wireless Lan Controller (rev 01) "lshw -class network" gives, for the above controller: *-network UNCLAIMED description: Network controller product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:f7d00000-f7d03fff After reading the answer to another similar question, I edited the file NetworkManager.conf to make "managed=true", but that did not make any difference, it is as if the wireless adapter were not there. In the "Network" setting window, I only see "Wired" and "Network proxy". Wireless has just disappeared: rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no and that's it! Nothing about the wireless controller... Any suggestions?

  Read the article

• Internet connection randomly drops out

  - by Dr_Bunsen

  Since a week or 2, I have this random network failures. No error pops up, the system says it's still connected to the internet(wifi and wired). The problem is, I can't connect to anything, even a ping google.com gives no feedback. And after many network-manager resets it will work again, for just a minute, and drop out again. I noticed that the /etc/resolv.conf contains this line: nameserver 127.0.0.1 I left out the "Do not edit" stuff, and after it worked for a second, this line is added: search lan When I change the nameserver to 8.8.8.8, I am still able to connect to anywhere. Does anyone got a clue what is happening here? I will provide any information asked. Thanks in advance p.s. I run Ubuntu 13.04 since lastnight(24-06-2013)

  Read the article

• Hostapd to connect laptop to Android

  - by Kmegamind

  i am trying to set up my laptop as an access point for my Android to use WiFi, so i knew that ubuntu sets the network as Ad-Hoc which is not discoverable by android, So i tried the method explained here -which i found on many other websites- but when i run hostapd.conf this error appears : nl80211: Failed to set interface wlan0 into AP mode nl80211 driver initialization failed. ELOOP: remaining socket: sock=4 eloop_data=0x8e488f8 user_data=0x8e48ea0 handler=0x807c5e0 ELOOP: remaining socket: sock=6 eloop_data=0x8e4aca8 user_data=(nil) handler=0x8086770 this is how my hostapd.conf looks like : interface=wlan0 driver=nl80211 ssid=Any_SSID_name hw_mode=g channel=1 macaddr_acl=0 auth_algs=1 ignore_broadcast_ssid=0 wpa=2 wpa_passphrase=Any_password wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP rsn_pairwise=CCMP and this is my wireless card info : description: Wireless interface product: BCM43225 802.11b/g/n vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:05:00.0 logical name: wlan0 version: 01 serial: 78:e4:00:73:51:f1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=brcmsmac driverversion=3.2.0-31-generic-pae firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:f0300000-f0303fff

  Read the article

• Regular wireless dropouts on new lenovo T440s in Ubuntu 14.04

  - by user290670

  Over the last 24 hours my wireless has dropped out regularly. I've tested to make sure it isn't my router (my phone and everyone in the house isn't having problems using the wifi). This is a brand-new installation of Ubuntu 14.04 and according to uname I'm running kernel 3.13.0-24-generic. Now, my laptop has an Intel 7260AC dual band wireless card and I've read that Ubuntu has been having trouble with these. I notice that at http://www.intel.com/support/wireless/wlan/sb/CS-034398.htm There are some updated drivers for my kernel version. However I have no idea how to update the kernel to use these drivers instead so that I can see if this will fix it. Can anyone help? These dropouts are really annoying. EDIT: Upgrading to 3.14.6 did not help.

  Read the article

• Issue with setting up multiple IP addresses on ubuntu server installation

  - by varunyellina

  I want to setup two ip addresses on my system for access through lan. This is my config on my other system. Desktop Installation My desktop installation runs with multiple IP's added through networkmanager both through lan and wifi. Server Installation On my server install I've edited /etc/network/interfaces to the following. auto eth0 auto eth0:1 # IP-1 iface eth0 inet static address 172.16.35.35 network 172.16.34.1 netmask 255.255.254.0 broadcast 172.166.35.255 dns-nameservers 172.16.100.221 8.8.8.8 # IP-2 iface eth0:1 inet static address 172.16.34.34 network 172.16.34.1 netmask 255.255.254.0 gateway 172.16.34.1 broadcast 172.16.35.255 After restarting through "/etc/init.d/networking restart" I recieve "Failed to bring up eth0:1" What am I doing wrong? Thankyou.

  Read the article

• Install a Mirror without downloading all the packages in the official repository

  - by Sam

  I first gonna explain the situation : ( The two PCs are running Ubuntu 12.04 ) I have a Laptop which is connected to a wifi connection, and a Desktop which can not be connected to Internet ( the modem is too far from it ), and i want to install some software to the last one. ( the two PCs are connected with an Ethernet cable ) I've already searched for a solution, but all i found was the use of some softwares that should have been already installed on the "Internet-less PC". ( Keryx, APTonCD ... ) What I want to do is to create a mirror in my laptop which contain the packages i have in this one ( situated in /var/cache/apt/archive ) and i don't want to download all the packages from the official repository, I don't need them. Can someone tell me if this is possible ? Thank you.

  Read the article

• Laptop works fine with ac adapter, hangs after login screen using battery

  - by tavoton

  I did an Ubuntu 10.10 Desktop Edition clean install (amd64 version) on a notebook Medion Akoya E1311. With AC adapter everything works fine, but using battery, it hangs after login screen. I can type login, password too, and I can press login button. But then I can see mouse cursor and lower task bar, not upper, and nothing works. The only thing I can do is login on a terminal with ctrl+alt+F1, this is ok. Nothing seems alive on Gnome except mouse cursor. The only thing I did after Ubuntu fresh install was donwloading driver for RTL8191SE from Realtek web, because WiFi didn't work, now works fine, with ac adapter of course. Hardware is a Notebook Medion Akoya E1311 AMD Sempron 210U 1 GB DDR2 ATI RS690M (Radeon X1200 Series) Western Digital 160GB wireless RTL8191SEvB ethernet RTL8101E/RTL8102E

  Read the article

• Install a Mirror without downloading all packages from official repository

  - by Sam

  I first gonna explain the situation: I have a Laptop which is connected to a wifi connection, and a Desktop which can not be connected to Internet (the modem is too far from it), and i want to install some software on the last one. (The two PCs are running Ubuntu 12.04, and are connected with an Ethernet cable) I've already searched for a solution, but all I've found was the use of some softwares that should have been already installed on the "Internet-less PC". ( Keryx, APTonCD ... ) What I want to do is to create a mirror in my laptop which contain the packages i have in this one ( situated in /var/cache/apt/archive ) and i don't want to download all the packages from the official repository, I actually don't need them. Can someone tell me if it is possible to do that ? Thanks,

  Read the article

• Getting photos and music on/off samsung/google galaxy nexus (ice cream sandwich) phone

  - by wim

  I am having trouble to access the filesystem on my phone. It just worked in previous version of Ubuntu, but now it appears empty whether it is mounted with MTP or PTP. I have followed a few guides on building and reinstalling libmtp etc without success. This answer did not help for me, either, and gMTP just hangs when I click the connect button. I know I can use wifi e.g. airdroid to access my photos, but this is too slow and a bit clumsy for me, and downloaded photos lose their original timestamps. Has anyone had success connecting to this phone on 12.04 ??

  Read the article

• How can I modify the knetworkmanager icon in my kde taskbar?

  - by Joe

  I am using kubuntu 12.04 Precise 64 on my notebook. Almost everything works fine. I would like to modify the colors of the icon(s) used by knetworkmanager to indicate wifi online. Right now, I am using the (default?) Oxygen theme. What I want is to make the online icons some color other than gray - probably black, so the contrast is greater and they're easier for me to see (I use reading glasses.) I found an old article on how to do this, but when I added the icons it mentioned, they were ignored. Where are these icons stored? Can I just edit them with something like gimp to change the colors, etc.? TIA

  Read the article

• How do I install the driver for my Linksys AE1200 Wireless-N USB Adapter?

  - by Lewis Graham

  I recently downloaded Ubuntu from the main website with the hopes of dual booting it with Windows. While the operating system works, it says that I need to install a driver for my graphics card. When I type in my password the installation fails. I figure it is because I need Internet access. I tried to install my WiFi USB adapter with the installation disc but Ubuntu doesn't seem to run the setup when I click the exe. What are my available solutions as I would really like to use Ubuntu from my programming and Windows for my gaming needs? The name as read on the box is: Linksys AE1200 Wireless- N USB Adapter The description reads as such: ID 13b1:0039 Linksys (a comma messed up format) ID 046d:0a0b Logitech, Inc. ClearChat Pro USB (headset)

  Read the article

• Fixing IP Renewal After Laptop Suspend

  - by Cerin

  I have a laptop running Ubuntu 10.04, and I've noticed that with some wifi networks, but not all, I'm unable to reconnect after coming out of suspension. I've tried both Network Manager and Wicd management daemons, and both get through validation, but get hung up on "Acquiring IP address...". The only solution I've found is to reboot the machine, after which it acquires an IP address very quickly. What's the underlying issue here? What would be a more efficient way to resolve the problem? EDIT: I've noticed that if I open Wicd and manually press "Connect", it fails to acquire an IP. However, if I do nothing and let it automatically try and connect, it acquires an IP and connects just fine...

  Read the article

• How do I get a D-Link DWL-G520 working?

  - by human33

  I have Ubuntu 12.04 on an older desktop PC, and I am finding it much harder to connect to a wifi connection than it should be. I have an iPhone with which I want to tether to it with Mifi 4.0, but I need to install ipheth which I can't do without internet on that computer. I am typing from my other windows pc with which i can download and move hings with thumb drives, but haven't gotten keryx to work. I also found a D-Link DWL-G520 HIGH SPEED 2.4GHZ (802.11G) WIRELESS 108MBPS PCI ADAPTER which I installed, but can't find a driver to put on a flashdrive to use it. If anybody has any ideas, they are appreciated. I am a noob, and I don't want to have to move the comp. downstairs to plug into the modem. PS: I also have a netgear USB network adapter, which doesn't work with my Ubuntu.

  Read the article

< Previous Page | 52 53 54 55 56 57 58 59 60 61 62 63  | Next Page >