Search Results

Search found 57763 results on 2311 pages for 'windows 8 x64'.

Page 56/2311 | < Previous Page | 52 53 54 55 56 57 58 59 60 61 62 63  | Next Page >

  • Unable to create system partition or locate existing system partition during Windows-7 installation

    - by glenneroo
    I have Windows XP 32-bit installed on an ASUS A8N-SLI Deluxe with 2x 500gb drives in RAID1 using the NV RAID controller. On this there are 3 partitions (XP, XP backup and DATA) There are also 4x 500gb drives in RAID10 using the Silicon Image 3114R RAID controller. I just purchased a Windows 7 64-bit as an ISO download upgrade version which I promptly burned to DVD and attempted to perform an upgrade installation. Here is the error message I am getting: Firstly, where are these "Setup log files" located? Second, does this mean I need to find compatible (64-bit?) drivers for the Mainboard and put them on floppy? EDIT: As suggested on another forum, I tried downloading the nVidia Mainboard RAID drivers for Windows 2003 64-bit. I loaded the drivers successfully using the Load Driver button, but pressing NEXT still returns this error.

    Read the article

  • BSOD on windows 7 with SSD during boot after improper shutdown

    - by Bob
    I have a BSOD on windows 7 with SSD during boot after improper shutdown (while windows animation logo is moving). The computer restart imediatly after BSOD, and windows proposes to launch startup repair (if i do it, it takes +-5min and fixes the problem : computer starts normally). However, after any new improper shutdown, i got the same problem. Remarks: If i unplug, re-plug the SSD whyle system is shutdown, i have the same problem. If i reproduce the situation with old HDD, i havn't the problem Previously, i had a different problem: BSOD when waking up after sleep, which was fixed by installing drivers (ethernet, usb, graphic card) I have made ram chech and ssd check and found no problems Starting with safe mode after improper shutdown causes a BSOD at loading of classpnp.sys Configuration: System: HP compaq 8510p SSD: OCZ vertex-2 2.5 Boot options: SATA native mode - Enable, HDD transalation mode - LBA-assisted

    Read the article

  • Prevent Windows 7 prompt format USB HDD

    - by mike
    I am running Windows 7. I have a USB HDD 100% formatted with a Trucypt partition. When I insert the drive into my system, Windows asks if I would like to format the drive, each time I insert the drive. So how do I turn this prompt off? If so, I would prefer it be applied globally (e.g. no more prompts for any other drives). Since its an invisible partition unless mounted with Trucypt, Windows is always going to think nothing is there and continue to prompt me. I don't want to hit enter on the keyboard a few times by mistake doing something else and have it to go through the process. I'll lose everything. It is all backed up BTW. Will just be inconvienient.

    Read the article

  • Windows Explorer Jumplist delay

    - by Jeremy B.
    I've begun to have an issue with the Jump list for Windows Explorer (Windows 7). What happens is that when i gesture click, or right click on the explorer icon the first time after rebooting the initial menu (Windows Explorer, Unpin) and the Jump List with my pinned folders and frequent folders works fine. Any subsequent attempt will open the initial menu, but the jump list will experience a long delay (10-20 seconds) before the pinned and frequent folders will pop up. Initially my frequent folders would grab a networked drive which I thought might be the cause. I have removed that from the list and there is still no change. I really enjoy being able to quickly hit directories i use often and this is quite frustrating. Any help would be extremely appreciated.

    Read the article

  • Desktop totally black, icons gone, taskbar visible, can't browse computer in Windows Explorer

    - by Abel
    Situation: Windows Vista, latest updates. After restarting to complete an installation, I find myself looking at a totally black windows desktop without any icons. The start menu and taskbar, including quickstart icons, appears. Some, but not all task bar tray icons appear. The systems seems stable. When I open Windows Explorer and click "desktop" in the folder treeview, the cursor immediately jumps back to the previously selected item. No error. Same when clicking on my user's profile or my documents. When I try "save as" in, say, Notepad, nothing happens, the dialog box (which defaults to "my documents") doesn't even show. Again, no error. Nothing serious afaict in the event log. Typing something in Start Search shows "Search failed to initialize". Most programs, including Internet Explorer, Firefox etc work as expected. Anybody ever encountered such abomination?

    Read the article

  • Error while setting up Anywhere Access on Windows Server 2012 Essential (personalized domain name from Microsoft)

    - by Thomas
    I am trying to setup Anywhere Access on a Windows Server 2012 Essential Release Candidate, but keep getting this error: "The domain name was not setup for your server. Wait a few minutes and run the wizard again. An unknown error occurred. Please wait a few minutes and then try again". These are the options that I selected in the Wizard: I want to set up a new domain name Get a personalized domain name from Microsoft Entered my Windows live id and password xxxx.remotewebaccess.com And on the next page the error is displayed. I have setup my router (Linksys WRT160N) to forward all TCP traffic to the Server. UPnP is also enabled. If I hit my public (dynamic) IP (http://188.182.194.182/) I get the Windows Server 2012 homepage. Any ideas?

    Read the article

  • Windows 8 Microsoft Account and Microsoft Store doesn't allow login

    - by Prabhpreet
    The problem is that I have to go through proxy here in college to make my internet work. When I signed with my live id to switch to the Microsoft account in Windows 8, it recognized and validate my security questions but says it cannot connect to Microsoft Services. All other apps like mail, messenger, etc. work except for the Windows Store. The windows store what apps are available but when installed, queues it up for a pending download. Is there a way to modify my proxy settings so that I can access both these features?

    Read the article

  • Empty track in Windows Media Player 12 that can't be deleted

    - by David Brown
    Right after I installed a fresh copy of Windows 7, I synced with my DropBox account that contains all of my music and added the directory to Windows Media Player 12. I now have a strange track that really isn't a track at all. It's grouped under "Unknown Artist" and has absolutely no text. The only reason I know it's there is because it highlights on mouse-over. Double-clicking on it does nothing. When the song before it ends, Windows Media Player stops playing altogether until I choose a different song (it should continue to play the next song on its own). When I try to delete this mysterious track, nothing happens. I've cleared my library and re-imported everything, but this empty track keeps appearing. I have also checked my Music directory and there is no empty MP3. What is going on here?

    Read the article

  • Reconciling vmware memory vs windows memory usage

    - by RyanW
    I have a Windows 2008 R2 64 bit virtual machine on ESXi 4.1 host. The host reports that the virtual machine is actively using less than 1 GB of memory. But, in Windows it's reporting the machine is using 7 GB of memory, even though the total of the processes listed in task manager is less than 1 GB. The machine is rather unresponsive and I'm concerned this is impacting other applications (server's purpose is to run ASP.NET state server process, which has been having trouble and led me to spot the memory question). I just noticed High memory usage Windows Server 2008r2 on VMware and will be looking through those documents more, but what is causing this?

    Read the article

  • Windows 7: Search indexing is stuck

    - by Ricket
    When I open Indexing Options, it says: 4,317 items indexed Indexing in progress. Search results might not be complete during this time. It's stuck at 4,317 though; no more items have been indexed. Worst of all, SearchIndexer.exe is taking up 100% CPU (well, 50%, but I have a dual core CPU; it's taking up all processing power it can). It is not causing hard drive activity though. I tried clicking "Troubleshoot search and indexing" at the bottom of the Indexing Options window, but it couldn't find any problem. I've also tried the repair registry key that several websites suggest; I change HKLM\SOFTWARE\Microsoft\Windows Search SetupCompletedSuccessfully to 0 and restarted the computer, and it apparently repaired because it flipped back to 1, but the same problem continues to occur. It's reducing the battery life of my laptop and making it really hot so that my fans are running all the time. I've had to disable the Windows Search service. How can I fix this? Do I need to just flat-out reformat my computer? Update: I've tried rebuilding a couple times. There's nothing unusual about the locations I have to index, and I don't have any downloads in progress or anything like that. I don't see any reason why it stopped, and I noticed it much too late to do a system restore. At this point, I'm hoping someone will offer up some secret answer that will fix the problem, thus the bounty. Another update: I tried starting the service again, just to let it try yet again. It seemed okay at first (Indexing Options showed it operating at reduced speed due to user activity, and the number of files was going up). A while later I checked, and the service had stopped. Event viewer revealed some errors like this: Log Name: Application Source: Application Error Date: 2/1/2010 7:34:23 PM Event ID: 1000 Task Category: (100) Level: Error Keywords: Classic User: N/A Computer: ricky-win7 Description: Faulting application name: SearchIndexer.exe, version: 7.0.7600.16385, time stamp: 0x4a5bcdd0 Faulting module name: NLSData0007.dll, version: 6.1.7600.16385, time stamp: 0x4a5bda88 Exception code: 0xc0000005 Fault offset: 0x002141ba Faulting process id: 0x13a0 Faulting application start time: 0x01caa39f2a70ec02 Faulting application path: C:\Windows\system32\SearchIndexer.exe Faulting module path: C:\Windows\System32\NLSData0007.dll Report Id: b4f7a7ae-0f92-11df-87fc-e5d65d8794c2 Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Application Error" /> <EventID Qualifiers="0">1000</EventID> <Level>2</Level> <Task>100</Task> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2010-02-02T00:34:23.000000000Z" /> <EventRecordID>10689</EventRecordID> <Channel>Application</Channel> <Computer>ricky-win7</Computer> <Security /> </System> <EventData> <Data>SearchIndexer.exe</Data> <Data>7.0.7600.16385</Data> <Data>4a5bcdd0</Data> <Data>NLSData0007.dll</Data> <Data>6.1.7600.16385</Data> <Data>4a5bda88</Data> <Data>c0000005</Data> <Data>002141ba</Data> <Data>13a0</Data> <Data>01caa39f2a70ec02</Data> <Data>C:\Windows\system32\SearchIndexer.exe</Data> <Data>C:\Windows\System32\NLSData0007.dll</Data> <Data>b4f7a7ae-0f92-11df-87fc-e5d65d8794c2</Data> </EventData> </Event> If you are having the same error and arrived here from a Google search, please comment or add an answer detailing your progress on this, if any...

    Read the article

  • Windows Vista - Can't start any program without choosing "Run as administrator"

    - by Dave Forgac
    A friend called me saying that her computer recently said it was applying a Windows update when it was shutting down. Now when logged in as her normal user whenever she tries to run any program from the start menu or from a shortcut on the desktop she gets the following popup: "Windows cannot access the specified device path or file You may not have the appropriate permissions to access the item" If she right-clicks and chooses 'Run as administrator' the program will run. We checked the Windows update history and it said the update was applied successfully and that there are no updates available. Unfortunately I'm in a different city so I don't have physical access to the system to look at it any further. Has anyone had a similar problem or have any suggestions?

    Read the article

  • CentOS Vs Windows Server 2008

    - by Steve
    Hi, Apologies if the question appears ambiguous, I have little experience in this area and was after some informed opinions. I am deploying a test scenario of a server/client network and need to make some choices for Server. The client will be a Windows system as it meets the requirements for the client, the server choice has more room for selection. From my experience with Linux in general and the appealing nature of open source for low cost, security etc and the availability and performance of database and web server programs I have been considering CentOS as a server choice. I have the ability to make most of the choices of what software / server packages I wish to install. This includes Active Directory (something I have no experience with). How well does this operate with Windows clients? Am I being too selective and creating unnecessary complication by setting out not to use a Windows Server OS?

    Read the article

  • Failure to copy files with ownership/ACL information on a Windows Server 2008 R2 machine

    - by darklion
    I'm attempting to copy a directory tree, maintaining its ownership information using the command: XCOPY S:\ProjectsDefault\Tempalte\admin S:\Projects\00\111\admin /S /E /I /O the command gives an Access denied error message, and while it does create the directory tree, the ownership and ACL information is not copied. This is being done on a Windows 2008 R2 Server which has mounted a share from a Windows 2003 R2 domain controller. The user has been been granted full access to the share and is a member of the Domain Admins security group. Oddly enough, the command does work if performed on a different (Windows 2003 R2 Server). (It also works if done using the Domain Administrator account on the 2008 server.)

    Read the article

  • How to disable Windows File Protection in Windows XP or 7 from Registry?

    - by SEARAS
    How to disable Windows File Protection in Windows 7 and/or XP from Registry? I want to automatically replace a driver with my created driver. I used PendingFileRenameOperations key in HKLM\System\CurrentControlSet\Control\Session Manager but i've found that it can ONLY be used for simple (not-system) files, because Windows File Protection disables it for system files (see this post). Now I need to temporarily disable WFP (and turn it on after changing driver). You can tell me another way to disable it. It can help me too. Thanks in advance! Any ideas?

    Read the article

  • Windows 7, Drivers, Cloning and Sysprep

    - by Frank Thornton
    I have Windows 7 working on one machine but when I move it off to the new machine it crashes. If this is a driver issue do I need to download the drivers and install them first? Or do I install Windows 7 on the new machine first then copy the drivers folder over to the other disk so it will boot up correctly? EDIT: I was trying this as well: http://www.todo-backup.com/support/tutorial/redeploy-system-to-dissimilar-hardware.htm EDIT: I tried sysprep but on bootup I see the Windows logo then the system crashes. I can stick the drive back in the old hardware and it runs fine.

    Read the article

  • Windows 8 mail cause event 529 when connect to exchange

    - by holian
    I set my company exchange mailbox in Windows 8.1 mail. (outsite). Everything works fine, but after i start the Windows 8.1 mail i get event with id 529 in the security log continously. Reason: Unknown user name or bad password Username: [email protected] range: Type of login: 8 Logon Process: Advapi Authentication Package: Negotiate Workstation Name: SERVERNAME Caller User Name: SERVERNAME $ Calling range BAR NUL Caller Logon ID: (0x0, 0x3E7) Caller Process ID: 4384 Transmitted services: - Source Network Address: 56.43.213.122 Source Port: 55 698 If i close windows mail, events stop flooding the security log in the server. Connection parameters in windwos 8: email:[email protected] password domain:company.local username:myemail server:mydomain.dyndns.org SSL:yes. Any idea whats the problem? I can check my mail, with the same setting on my android phone without any problem. Thank you

    Read the article

  • Remote Desktop via VPN from Mac to Windows Vista

    - by Vegar
    I have some problems connecting to my office from home. I'm getting the following error message: Remote Desktop Connection cannot verify the identity of the computer that you want to connect to. Try reconnecting to the Windows-based computer, or contact our administrator. I have downloaded CoRD, and for some reason, that works okay. I can also connect from a Windows 7 running on VMWare Fusion. On Windows 7, I use SonicWall Global VPN Client, and on the Mac, I use VPN tracker, if that is related... What's going on?

    Read the article

  • Prevent Windows 7 from unpluging External HDD

    - by marverix
    I have installed Windows 7 as my media server. I pluged in 500GB external HDD via USB. I have changed power plan to Best Performance and changed advenced power settings to never turn off HDD etc. I even yesterday wrote powershell script (create and delete folder on this disk) and I have added it to harmonogram to run every 5 minutes starting from system boot. And nothing! Disk after some time (I realy can't say when) is turning off and Windows show "Unknown Device" in Device Manager. Then only system reboot or disk reboot helps. Any ideas how to prevent Windows 7 from stopping my external HDD? Cheers!

    Read the article

  • Joining Windows 7 Professional to a Windows Server 2003 R2 x64 domain fails.

    - by Vinko Vrsalovic
    I have a windows 7 professional (spanish) laptop trying to join a Windows Server 2003 (english) domain. It detect correctly the SRV record, finding the proper domain controller, but then the join fails with the error message (snippet, because the error is in spanish) An Active Directory Domain Controller for This Domain Could Not be Contacted The DNS is correctly set, and client can ping by name and IP the server, the server can ping the client by IP. I've tested with the FW down to no avail. A host of other XP Pro clients are connected to the domain. I've restarted Net Logon and checked that Windows Time is up. Also the times are in sync between the server and the client. I'll put below diagnostics output. I'm wondering if there's anything special to be done on either the server or the client to have a Win 7 Pro join a 2k3 R2 domain. The following diagnostic information follows: netdiag /q for the DC dcdiag on the DC ipconfig /all on the Win 7 client netdiag /q on the DC: .................................. Computer Name: HI-X2 DNS Host Name: hi-x2.hi.local System info : Microsoft Windows Server 2003 R2 (Build 3790) Processor : EM64T Family 6 Model 23 Stepping 10, GenuineIntel List of installed hotfixes : KB923561 KB924667-v2 KB925398_WMP64 KB925902 KB926122 KB927891 KB929123 KB930178 KB932168 KB936357 KB938127 KB941569 KB942830 KB942831 KB943055 KB943460 KB944338-v2 KB944653 KB945553 KB946026 KB948496 KB950760 KB950762 KB950974 KB951066 KB951748 KB952004 KB952069 KB952954 KB954155 KB954550-v7 KB955069 KB955759 KB956572 KB956802 KB956803 KB956844 KB958469 KB958644 KB958869 KB959426 KB960225 KB960803 KB960859 KB961063 KB961118 KB961501 KB967715 KB967723 KB968389 KB968816 KB969059 KB969947 KB970238 KB970430 KB970483 KB971032 KB971468 KB971657 KB971737 KB971961 KB971961-IE8 KB972270 KB973037 KB973354 KB973507 KB973540 KB973687 KB973815 KB973825 KB973869 KB973904 KB973917-v2 KB974112 KB974318 KB974392 KB974571 KB975025 KB975467 KB975560 KB975713 KB976662-IE8 KB977290 KB977816 KB977914 KB978037 KB978262 KB978338 KB978542 KB978601 KB978706 KB979306 KB979309 KB979683 KB980182 KB980182-IE8 KB980232 KB980302-IE8 KB981332-IE8 KB981350 Q147222 Per interface results: Adapter : Local Area Connection Host Name. . . . . . . . . : hi-x2.hi.local IP Address . . . . . . . . : 10.0.1.199 Subnet Mask. . . . . . . . : 255.0.0.0 Default Gateway. . . . . . : 10.0.1.1 Dns Servers. . . . . . . . : 10.0.1.199 WINS service test. . . . . : Skipped Global results: [WARNING] You don't have a single interface with the 'WorkStation Service', 'Messenger Service', 'WINS' names defined. DNS test . . . . . . . . . . . . . : Passed PASS - All the DNS entries for DC are registered on DNS server '10.0.1.199'. IP Security test . . . . . . . . . : Skipped The command completed successfully dcdiag on the DC: Domain Controller Diagnosis Performing initial setup: Done gathering initial info. Doing initial required tests Testing server: Default-First-Site-Name\HI-X2 Starting test: Connectivity ......................... HI-X2 passed test Connectivity Doing primary tests Testing server: Default-First-Site-Name\HI-X2 Starting test: Replications ......................... HI-X2 passed test Replications Starting test: NCSecDesc ......................... HI-X2 passed test NCSecDesc Starting test: NetLogons ......................... HI-X2 passed test NetLogons Starting test: Advertising ......................... HI-X2 passed test Advertising Starting test: KnowsOfRoleHolders ......................... HI-X2 passed test KnowsOfRoleHolders Starting test: RidManager ......................... HI-X2 passed test RidManager Starting test: MachineAccount ......................... HI-X2 passed test MachineAccount Starting test: Services ......................... HI-X2 passed test Services Starting test: ObjectsReplicated ......................... HI-X2 passed test ObjectsReplicated Starting test: frssysvol ......................... HI-X2 passed test frssysvol Starting test: frsevent ......................... HI-X2 passed test frsevent Starting test: kccevent ......................... HI-X2 passed test kccevent Starting test: systemlog ......................... HI-X2 passed test systemlog Starting test: VerifyReferences ......................... HI-X2 passed test VerifyReferences Running partition tests on : ForestDnsZones Starting test: CrossRefValidation ......................... ForestDnsZones passed test CrossRefValidation Starting test: CheckSDRefDom ......................... ForestDnsZones passed test CheckSDRefDom Running partition tests on : DomainDnsZones Starting test: CrossRefValidation ......................... DomainDnsZones passed test CrossRefValidation Starting test: CheckSDRefDom ......................... DomainDnsZones passed test CheckSDRefDom Running partition tests on : Schema Starting test: CrossRefValidation ......................... Schema passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Schema passed test CheckSDRefDom Running partition tests on : Configuration Starting test: CrossRefValidation ......................... Configuration passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Configuration passed test CheckSDRefDom Running partition tests on : hi Starting test: CrossRefValidation ......................... hi passed test CrossRefValidation Starting test: CheckSDRefDom ......................... hi passed test CheckSDRefDom Running enterprise tests on : hi.local Starting test: Intersite ......................... hi.local passed test Intersite Starting test: FsmoCheck ......................... hi.local passed test FsmoCheck ipconfig /all on the Windows 7 client: Configuraci¢n IP de Windows Nombre de host. . . . . . . . . : hi-p6 Sufijo DNS principal . . . . . : Tipo de nodo. . . . . . . . . . : h¡brido Enrutamiento IP habilitado. . . : no Proxy WINS habilitado . . . . . : no Adaptador de LAN inal mbrica Conexi¢n de red inal mbrica: Sufijo DNS espec¡fico para la conexi¢n. . : Descripci¢n . . . . . . . . . . . . . . . : Intel(R) WiFi Link 5100 AGN Direcci¢n f¡sica. . . . . . . . . . . . . : 00-22-FB-63-47-A0 DHCP habilitado . . . . . . . . . . . . . : no Configuraci¢n autom tica habilitada . . . : s¡ Direcci¢n IPv4. . . . . . . . . . . . . . : 10.0.1.42(Preferido) M scara de subred . . . . . . . . . . . . : 255.255.255.0 Puerta de enlace predeterminada . . . . . : 10.0.1.1 Servidores DNS. . . . . . . . . . . . . . : 10.0.1.199 NetBIOS sobre TCP/IP. . . . . . . . . . . : habilitado Adaptador de Ethernet Conexi¢n de  rea local: Estado de los medios. . . . . . . . . . . : medios desconectados Sufijo DNS espec¡fico para la conexi¢n. . : Descripci¢n . . . . . . . . . . . . . . . : Realtek PCIe GBE Family Controller Direcci¢n f¡sica. . . . . . . . . . . . . : 00-1E-33-1F-35-B1 DHCP habilitado . . . . . . . . . . . . . : s¡ Configuraci¢n autom tica habilitada . . . : s¡ Adaptador de t£nel isatap.{8926581E-09AC-4123-906B-DA6386AD2D60}: Estado de los medios. . . . . . . . . . . : medios desconectados Sufijo DNS espec¡fico para la conexi¢n. . : Descripci¢n . . . . . . . . . . . . . . . : Adaptador ISATAP de Microsoft Direcci¢n f¡sica. . . . . . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP habilitado . . . . . . . . . . . . . : no Configuraci¢n autom tica habilitada . . . : s¡ Adaptador de t£nel Teredo Tunneling Pseudo-Interface: Sufijo DNS espec¡fico para la conexi¢n. . : Descripci¢n . . . . . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface Direcci¢n f¡sica. . . . . . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP habilitado . . . . . . . . . . . . . : no Configuraci¢n autom tica habilitada . . . : s¡ Direcci¢n IPv6 . . . . . . . . . . : 2001:0:5ef5:73ba:1cec:3883:f5ff:fed5(Preferido) V¡nculo: direcci¢n IPv6 local. . . : fe80::1cec:3883:f5ff:fed5%13(Preferido) Puerta de enlace predeterminada . . . . . : :: NetBIOS sobre TCP/IP. . . . . . . . . . . : deshabilitado

    Read the article

  • What to do when a device has no driver for Windows 7 but it has Vista, XP drivers

    - by Mehper C. Palavuzlar
    This has always been a bothersome matter for me. Some devices (printers, scanners, etc.) have drivers for older versions of Windows (Vista, XP, 2000, NT) but no driver for Windows 7. What are my chances to install such devices on Windows 7? Example case: I have a Sharp printer & scanner (Sharp AR-122E N) which I have used for my old Windows XP based PC. Now I want to install it on a Windows 7 x64 based PC. Windows 7 cannot load its driver. I used the original driver CD but when I run the setup.exe (which is included in AR122EN111.exe, 6713KB), it says Cannot install driver on this operating system. Supported operating systems are: Windows 2000, XP, Vista. I tried to install the driver using compatibility settings. I tried Windows Vista and Windows XP SP3, but to no avail. The setup gave the same error. I also googled for Windows 7 driver for "Sharp AR-122E N" but it only listed the original driver that I tried. The official site of Sharp does not even list the driver for this product. In the past, the compatibility setting workaround did work for some devices, but this time it failed. What else can I do to overcome this problem?

    Read the article

  • Fixing restore active desktop on windows xp

    - by Rachel Nark
    I've already tried this: http://answers.microsoft.com/en-us/windows/forum/windows_xp-desktop/windows-xp-will-not-restore-my-active-desktop/f664bfe4-0acd-4b11-8918-eb779bb2cc07 had no luck. All I know is that the computer crashed from a power outage. I've tried clicking the restore button and rebooting. Nothing. What else is there to try? Would like to have the desktop back. It powers on fine. I can login and use windows just fine. Just you get that annoying restore active desktop screen.

    Read the article

  • Windows vista firewall exceptions unchangeable

    - by user61099
    Hey, I want to allow a program (iTunes) through my windows firewall, so i check it in the program or port list under the exceptions tab (in my windows firewall settings), then i click OK. When i reopen the window the box is unchecked again. Which means i can never get the program through my windows firewall. I think this is a problem due to administrators rights. Because I also can not delete the program from the list. I can however delete other programs from the list. Anybody have any ideas, tips, remarks?

    Read the article

  • Windows 7 wake from sleep and UTC?

    - by Joshua Elliott
    I've been having problems with windows 7 waking from sleep after one minute or so on my laptop. I also have ArchLinux installed on this computer. A while back I tried a registry tweak to get windows to use UTC so it would play nice with Linux. The registry tweak didn't seem to work and my windows clock was always wrong. Today I deleted the registry entry that I added, and the problem with sleeping seemed to go away. Can anyone make sense of this? The registry entry I added was: [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\TimeZoneInformation] "RealTimeIsUniversal"=dword:00000001

    Read the article

  • Windows 7 Ult machine can see XP Pro but not vice versa

    - by Chadworthington
    My new Windows 7 Ult. PC can attach to my work laptop and pull files but my work laptop cannot find my Windows 7 on the network. Is there some sort of limitation going on here? Before I got the new XP machine, my old XP Pro PC could pull files from the XP Pro laptop but not vice versa. The common thread seems to be that the work laptop cannot see other PCs, Windows 7 or not. Could it be because that PC is on a work domain? When I pull files from the work PC, I am prompted for domain credentials, which I provide.

    Read the article

  • prevent use of 'net user' command to change passwords on windows vista / xp

    - by guest
    hello the point is, if i'm logged in (and as almost every windows user, i've got an admin-account), and someone comes across my not locked pc, it is possible to change my password the pro-way through using: net user Admin %NEW_PASSWD% what can i do to prevent that, besides not being logged in as admin. i once saw a way, where the 'net user' command was substituted by a .bat file. so if you call 'net user Admin ...', it runs this .bat-file instead, which locks the notebook immediately. problem is, i honestly don't know how i could let windows substitute eg net.exe with a .bat-file. (too little windows knowledge) do you know any way how to do it? i'd appreciate it.

    Read the article

< Previous Page | 52 53 54 55 56 57 58 59 60 61 62 63  | Next Page >