configuration - Page 560

SharePoint 2010 Diagnostic Studio Remote Diag

- by juanlarios

I have had some time this week to try out some tools that I have been meaning to try out. This week I am trying out the SP 2010 Diagnostic Studio. I installed it successfully and tried it on my development evironment. I was able to build a report and a snapshot of the environment. I decided to turn my attention to my Employer's intranet environment. This would allow me to analyze it and measure it against benchmarks. I didn't want to install the Diagnostic studio on the Production Envorinment, lucky for me, the Diagnostic studio can be run remotely, well...kind of. Issue My development environment is a stand alone, full installation of SharePoint 2010 Server. It has Office 2010, SQL 2008 Enterprise, a DC...well you get the point, it's jammed packed! But more importantly it's a stand alone, self contained VM environment. Well Microsoft has instructions as to how to connect remotely with Diagnostic Studio here. The deciving part of this is that the SP2010DS prompts you for credentails. So I thought I was getting the right account to run the reports. I tried all the Power Shell commands in the link above but I still ended up getting the following errors: 06/28/2011 12:50:18 Connecting to remote server failed with the following error message : The WinRM client cannot process the request...If the SPN exists, but CredSSP cannot use Kerberos to validate the identity of the target computer and you still want to allow the delegation of the user credentials to the target computer, use gpedit.msc and look at the following policy: Computer Configuration -> Administrative Templates -> System -> Credentials Delegation -> Allow Fresh Credentials with NTLM-only Server Authentication. Verify that it is enabled and configured with an SPN appropriate for the target computer. For example, for a target computer name "myserver.domain.com", the SPN can be one of the following: WSMAN/myserver.domain.com or WSMAN/*.domain.com. Try the request again after these changes. For more information, see the about_Remote_Troubleshooting Help topic. 06/28/2011 12:54:47 Access to the path '\\<targetserver>\C$\Users\<account logging in>\AppData\Local\Temp' is denied. You might also get an error message like this: The WinRM client cannot process the request. A computer policy does not allow the delegation of the user credentials to the target computer. Explanation After looking at the event logs on the target environment, I noticed that there were a several Security Exceptions. After looking at the specifics around who was denied access, I was able to see the account that was being denied access, it was the client machine administrator account. Well of course that was never going to work!!! After some quick Googling, the last error message above will lead you to edit the Local Group Policy on the client server. And although there are instructions from microsoft around doing this, it really will not work in this scenario. Notice the Description and how it only applices to authentication mentioned? Resolution I can tell you what I did, but I wish there was a better way but I simply don't know if it's duable any other way. Because my development environment had it's own DC, I didn't really want to mess with Kerberos authentication. I would also not be smart to connect that server to the domain, considering it has it's own DC. I ended up installing SharePoint 2010 Diagnostic Studio on another Windows 7 Dev environment I have, and connected the machien to the domain. I ran all the necesary remote credentials commands mentioned here. Those commands add the group policy for you! Once I did this I was able to authenticate properly and I was able to get the reports. Conclusion You can run SharePoint 2010 Diagnostic Studio Remotely but it will require some specific scenarions. A couple of things I should mention is that as far as I understand, SP2010 DS, will install agents on your target environment to run tests and retrieve the data. I was a Farm Administrator, and also a Server Admin on SharePoint Server. I am not 100% sure if you need all those permissions but I that's just what I have to my internal intranet. I deally I would like to have a machine that I can have SharePoint 2010 DIagnostic Studio installed and I can run that against client environments. It appears that I will not be able to do that, unless I enable Kerberos on my Windows 7 Machine now. If you have it installed in the same way I would like to have it, please let me know, I'll keep trying to get what I'm after. Hope this helps someone out there doing the same.

Read the article

Oracle Enterprise Manager Cloud Control 12c Release 2 (12.1.0.2) is Available Now !

- by Anand Akela

Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} Oracle today announced the availability of Oracle Enterprise Manager Cloud Control 12c Release 2 (12.1.0.2). It is now available for download on OTN on ALL platforms. This is the first major release since the launch of Enterprise Manager 12c in October of 2011. This is the first time when Enterprise Manager release is available on all platforms simultaneously. This is primarily a stability release which incorporates many of issues and feedback reported by early adopters. In addition, this release contains many new features and enhancements in areas across the board. New Capabilities and Features Enhanced management capabilities for enterprise private clouds: Introduces new capabilities to allow customers to build and manage a Java Platform-as-a-Service (PaaS) cloud based on Oracle Weblogic Server. The new capabilities include guided set up of PaaS Cloud, self-service provisioning, automatic scale out and metering and chargeback. Enhanced lifecycle management capabilities for Oracle WebLogic Server environments: Combining in-context multiple domain, patching and configuration file synchronizations. Integrated Hardware-Software management for Oracle Exalogic Elastic Cloud through features such as rack schematics visualization and integrated monitoring of all hardware and software components. The latest management capabilities for business-critical applications include: Business Application Management: A new Business Application (BA) target type and dashboard with flexible definitions provides a logical view of an application’s business transactions, end-user experiences and the cloud infrastructure the monitored application is running on. Enhanced User Experience Reporting: Oracle Real User Experience Insight has been enhanced to provide reporting capabilities on client-side issues for applications running in the cloud and has been more tightly coupled with Oracle Business Transaction Management to help ensure that real-time user experience and transaction tracing data is provided to users in context. Several key improvements address ease of administration, reporting and extensibility for massively scalable cloud environments including dynamic groups, self-updateable monitoring templates, bulk operations against many events, etc. New and Revised Plug-Ins: Several plug-Ins have been updated as a part of this release resulting in either new versions or revisions. Revised plug-ins contain only bug-fixes and while new plug-ins incorporate both bug fixes as well as new functionality. Plug-In Name Version Enterprise Manager for Oracle Database 12.1.0.2 (revision) Enterprise Manager for Oracle Fusion Middleware 12.1.0.3 (new) Enterprise Manager for Chargeback and Capacity Planning 12.1.0.3 (new) Enterprise Manager for Oracle Fusion Applications 12.1.0.3 (new) Enterprise Manager for Oracle Virtualization 12.1.0.3 (new) Enterprise Manager for Oracle Exadata 12.1.0.3 (new) Enterprise Manager for Oracle Cloud 12.1.0.4 (new) Installation and Upgrade: All major platforms have been released simultaneously (Linux 32 / 64 bit, Solaris (SPARC), Solaris x86-64, IBM AIX 64-bit, and Windows x86-64 (64-bit) ) Enterprise Manager 12.1.0.2 is a complete release that includes both the EM OMS and Agent versions of 12.1.0.2. Installation options available with EM 12.1.0.2: User can do fresh Install or an upgrade from versions EM 10.2.0.5, 11.1, or 12.1.0.2 ( Bundle Patch 1 not mandatory). Upgrading to EM 12.1.0.2 from EM 12.1.0.1 is not a patch application (similar to Bundle Patch 1) but is achieved through a 1-system upgrade. Documentation: Oracle Enterprise Manager Cloud Control Introduction Document provides a broad overview of capabilities and highlights"What's New" in EM 12.1.0.2. All updated Oracle Enterprise Manager documentation can be found on OTN Upgrade Guide Please feel free to ask questions related to the new Oracle Enterprise Manager Cloud Control 12c Release 2 (12.1.0.2) at the Oracle Enterprise Manager Forum . You could also share your feedback at twitter using hash tag #em12c or at Facebook . Stay Connected: Twitter | Face book | You Tube | Linked in | Newsletter

Read the article

SQLIO Writes

- by Grant Fritchey

SQLIO is a fantastic utility for testing the abilities of the disks in your system. It has a very unfortunate name though, since it's not really a SQL Server testing utility at all. It really is a disk utility. They ought to call it DiskIO because they'd get more people using I think. Anyway, branding is not the point of this blog post. Writes are the point of this blog post. SQLIO works by slamming your disk. It performs as mean reads as it can or it performs as many writes as it can depending on how you've configured your tests. There are much smarter people than me who will get into all the various types of tests you should run. I'd suggest reading a bit of what Jonathan Kehayias (blog|twitter) has to say or wade into Denny Cherry's (blog|twitter) work. They're going to do a better job than I can describing all the benefits and mechanisms around using this excellent piece of software. My concerns are very focused. I needed to set up a series of tests to see how well our product SQL Storage Compress worked. I wanted to know the effects it would have on a system, the disk for sure, but also memory and CPU. How to stress the system? SQLIO of course. But when I set it up and ran it, following the documentation that comes with it, I was seeing better than 99% compression on the files. Don't get me wrong. Our product is magnificent, wonderful, all things great and beautiful, gets you coffee in the morning and is made mostly from bacon. But 99% compression. No, it's not that good. So what's up? Well, it's the configuration. The default mechanism is to load up a file, something large that will overwhelm your disk cache. You're instructed to load the file with a character 0x0. I never got a computer science degree. I went to film school. Because of this, I didn't memorize ASCII tables so when I saw this, I thought it was zero's or something. Nope. It's NULL. That's right, you're making a very large file, but you're filling it with NULL values. That's actually ok when all you're testing is the disk sub-system. But, when you want to test a compression and decompression, that can be an issue. I got around this fairly quickly. Instead of generating a file filled with NULL values, I just copied a database file for my tests. And to test it with SQL Storage Compress, I used a database file that had already been run through compression (about 40% compression on that file if you're interested). Now the reads were taken care of. I am seeing very realistic performance from decompressing the information for reads through SQLIO. But what about writes? Well, the issue is, what does SQLIO write? I don't have access to the code. But I do have access to the results. I did two different tests, just to be sure of what I was seeing. First test, use the .DAT file as described in the documentation. I opened the .DAT file after I was done with SQLIO, using WordPad. Guess what? It's a giant file full of air. SQLIO writes NULL values. What does that do to compression? I did the test again on a copy of an uncompressed database file. Then I ran the original and the SQLIO modified copy through ZIP to see what happened. I got better than 99% compression out of the SQLIO modified file (original file of 624,896kb went to 275,871kb compressed, after SQLIO it went to 608kb compressed). So, what does SQLIO write? It writes air. If you're trying to test it with compression or maybe some other type of file storage mechanism like dedupe, you need to know this because your tests really won't be valid. Should I find some other mechanism for testing? Yeah, if all I'm interested in is establishing performance to my own satisfaction, yes. But, I want to be able to compare my results with other people's results and we all need to be using the same tool in order for that to happen. SQLIO is the common mechanism that most people I know use to establish disk performance behavior. It'd be better if we could get SQLIO to do writes in some other fashion. Oh, and before I go, I get to brag a bit. Measuring IOPS, SQL Storage Compress outperforms my disk alone by about 30%.

Read the article

How can I set my screen resolution to match my TV?

- by Scott Severance

I have a computer in my classroom that's connected to an LG smart TV (that's actually not so smart. I wouldn't recommend buying one.). For the touch interface, the TV wants a resolution of 1920x1080 at 60Hz. However, I can't seem to set the computer to that resolution. The display settings only offer 1024x768 and 640x480. The computer dual boots with Windows XP, where widescreen options are available in approximately the required size, but the exact resolution -- or even aspect ratio-- isn't available in XP either. I tried the following command: xrandr -s 1920x1080 -r 60 The response was: Size 1920x1080 not found in available modes Back in the old days, the solution would be to edit xorg.conf. However, since that file no longer exists, and I haven't found up-to-date info, I don't know what else to do. If it helps, this machine will never be connected to a different display, so resolution flexibility isn't important. Here's the output of lshw: *-display:0 description: VGA compatible controller product: 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 03 width: 64 bits clock: 33MHz capabilities: vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:42 memory:fe800000-febfffff memory:d0000000-dfffffff ioport:ecd8(size=8) *-display:1 UNCLAIMED description: Display controller product: 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2.1 bus info: pci@0000:00:02.1 version: 03 width: 64 bits clock: 33MHz According to the system settings, my graphics driver is unknown and my "experience" is standard. This is 64-bit Ubuntu 12.04 (Precise) Note: There are a number of similar questions to this one, but they didn't include any answers that helped me. Update After posting this question, I noticed one in the sidebar that I hadn't found through search but which appeared to contain the answer. Based on that question, I created the /etc/X11/xorg.conf file below: Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" ModulePath "/usr/lib/xorg/modules" FontPath "/usr/share/fonts/X11/misc" FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" FontPath "built-ins" EndSection Section "Module" Load "glx" Load "dri2" Load "dbe" Load "dri" Load "record" Load "extmod" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "Monitor0" VendorName "LG" ModelName "Smart TV" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "DRI" # [<bool>] #Option "ColorKey" # <i> #Option "VideoKey" # <i> #Option "FallbackDebug" # [<bool>] #Option "Tiling" # [<bool>] #Option "LinearFramebuffer" # [<bool>] #Option "Shadow" # [<bool>] #Option "SwapbuffersWait" # [<bool>] #Option "TripleBuffer" # [<bool>] #Option "XvMC" # [<bool>] #Option "XvPreferOverlay" # [<bool>] #Option "DebugFlushBatches" # [<bool>] #Option "DebugFlushCaches" # [<bool>] #Option "DebugWait" # [<bool>] #Option "HotPlug" # [<bool>] #Option "RelaxedFencing" # [<bool>] Identifier "Card0" Driver "intel" BusID "PCI:0:2:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" DefaultDepth 24 #SubSection "Display" # Viewport 0 0 # Depth 1 #EndSubSection #SubSection "Display" # Viewport 0 0 # Depth 4 #EndSubSection #SubSection "Display" # Viewport 0 0 # Depth 8 #EndSubSection #SubSection "Display" # Viewport 0 0 # Depth 15 #EndSubSection #SubSection "Display" # Viewport 0 0 # Depth 16 #EndSubSection SubSection "Display" Viewport 0 0 Depth 24 Modes "1024x768" "1920x1080" EndSubSection EndSection According to /var/log/Xorg.0.log, my settings aren't being applied. In fact, I wonder if the config file is even being read. [ 1209.083] (**) intel(0): Depth 24, (--) framebuffer bpp 32 [ 1209.084] (==) intel(0): RGB weight 888 [ 1209.084] (==) intel(0): Default visual is TrueColor [ 1209.084] (II) intel(0): Integrated Graphics Chipset: Intel(R) G41 [ 1209.084] (--) intel(0): Chipset: "G41" [ 1209.084] (**) intel(0): Relaxed fencing enabled [ 1209.084] (**) intel(0): Wait on SwapBuffers? enabled [ 1209.084] (**) intel(0): Triple buffering? enabled [ 1209.084] (**) intel(0): Framebuffer tiled [ 1209.084] (**) intel(0): Pixmaps tiled [ 1209.084] (**) intel(0): 3D buffers tiled [ 1209.084] (**) intel(0): SwapBuffers wait enabled [ 1209.084] (==) intel(0): video overlay key set to 0x101fe [ 1209.172] (II) intel(0): Output VGA1 using monitor section Monitor0 [ 1209.260] (II) intel(0): EDID for output VGA1 [ 1209.260] (II) intel(0): Printing probed modes for output VGA1 [ 1209.260] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 1209.260] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 1209.260] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 1209.260] (II) intel(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz) [ 1209.260] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz) [ 1209.260] (II) intel(0): Output VGA1 connected [ 1209.260] (II) intel(0): Using user preference for initial modes [ 1209.260] (II) intel(0): Output VGA1 using initial mode 1024x768 [ 1209.260] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 1209.260] (II) intel(0): Kernel page flipping support detected, enabling [ 1209.260] (==) intel(0): DPI set to (96, 96)

Read the article

ASP.NET Multi-Select Radio Buttons

- by Ajarn Mark Caldwell

“HERESY!” you say, “Radio buttons are for single-select items! If you want multi-select, use checkboxes!” Well, I would agree, and that is why I consider this a significant bug that ASP.NET developers need to be aware of. Here’s the situation. If you use ASP:RadioButton controls on your WebForm, then you know that in order to get them to behave properly, that is, to define a group in which only one of them can be selected by the user, you use the Group attribute and set the same value on each one. For example: 1: <asp:RadioButton runat="server" ID="rdo1" Group="GroupName" checked="true" /> 2: <asp:RadioButton runat="server" ID="rdo2" Group="GroupName" /> With this configuration, the controls will render to the browser as HTML Input / Type=radio tags and when the user selects one, the browser will automatically deselect the other one so that only one can be selected (checked) at any time. BUT, if you user server-side code to manipulate the Checked attribute of these controls, it is possible to set them both to believe that they are checked. 1: rdo2.Checked = true; // Does NOT change the Checked attribute of rdo1 to be false. As long as you remain in server-side code, the system will believe that both radio buttons are checked (you can verify this in the debugger). Therefore, if you later have code that looks like this 1: if (rdo1.Checked) 2: { 3: DoSomething1(); 4: } 5: else 6: { 7: DoSomethingElse(); 8: } then it will always evaluate the condition to be true and take the first action. The good news is that if you return to the client with multiple radio buttons checked, the browser tries to clean that up for you and make only one of them really checked. It turns out that the last one on the screen wins, so in this case, you will in fact end up with rdo2 as checked, and if you then make a trip to the server to run the code above, it will appear to be working properly. However, if your page initializes with rdo2 checked and in code you set rdo1 to checked also, then when you go back to the client, rdo2 will remain checked, again because it is the last one and the last one checked “wins”. And this gets even uglier if you ever set these radio buttons to be disabled. In that case, although the client browser renders the radio buttons as though only one of them is checked the system actually retains the value of both of them as checked, and your next trip to the server will really frustrate you because the browser showed rdo2 as checked, but your DoSomething1() routine keeps getting executed. The following is sample code you can put into any WebForm to test this yourself. 1: <body> 2: <form id="form1" runat="server"> 3: <h1>Radio Button Test</h1> 4: <hr /> 5: <asp:Button runat="server" ID="cmdBlankPostback" Text="Blank Postback" /> 6:             7: <asp:Button runat="server" ID="cmdEnable" Text="Enable All" OnClick="cmdEnable_Click" /> 8:             9: <asp:Button runat="server" ID="cmdDisable" Text="Disable All" OnClick="cmdDisable_Click" /> 10:             11: <asp:Button runat="server" ID="cmdTest" Text="Test" OnClick="cmdTest_Click" /> 12: <br /><br /><br /> 13: <asp:RadioButton ID="rdoG1R1" GroupName="Group1" runat="server" Text="Group 1 Radio 1" Checked="true" /><br /> 14: <asp:RadioButton ID="rdoG1R2" GroupName="Group1" runat="server" Text="Group 1 Radio 2" /><br /> 15: <asp:RadioButton ID="rdoG1R3" GroupName="Group1" runat="server" Text="Group 1 Radio 3" /><br /> 16: <hr /> 17: <asp:RadioButton ID="rdoG2R1" GroupName="Group2" runat="server" Text="Group 2 Radio 1" /><br /> 18: <asp:RadioButton ID="rdoG2R2" GroupName="Group2" runat="server" Text="Group 2 Radio 2" Checked="true" /><br /> 19: 20: </form> 21: </body> 1: protected void Page_Load(object sender, EventArgs e) 2: { 3: 4: } 5: 6: protected void cmdEnable_Click(object sender, EventArgs e) 7: { 8: rdoG1R1.Enabled = true; 9: rdoG1R2.Enabled = true; 10: rdoG1R3.Enabled = true; 11: rdoG2R1.Enabled = true; 12: rdoG2R2.Enabled = true; 13: } 14: 15: protected void cmdDisable_Click(object sender, EventArgs e) 16: { 17: rdoG1R1.Enabled = false; 18: rdoG1R2.Enabled = false; 19: rdoG1R3.Enabled = false; 20: rdoG2R1.Enabled = false; 21: rdoG2R2.Enabled = false; 22: } 23: 24: protected void cmdTest_Click(object sender, EventArgs e) 25: { 26: rdoG1R2.Checked = true; 27: rdoG2R1.Checked = true; 28: } 29: 30: protected void Page_PreRender(object sender, EventArgs e) 31: { 32: 33: } After you copy the markup and page-behind code into the appropriate files. I recommend you set a breakpoint on Page_Load as well as cmdTest_Click, and add each of the radio button controls to the Watch list so that you can walk through the code and see exactly what is happening. Use the Blank Postback button to cause a postback to the server so you can inspect things without making any changes. The moral of the story is: if you do server-side manipulation of the Checked status of RadioButton controls, then you need to set ALL of the controls in a group whenever you want to change one.

Read the article

Oracle NoSQL Database Exceeds 1 Million Mixed YCSB Ops/Sec

- by Charles Lamb

We ran a set of YCSB performance tests on Oracle NoSQL Database using SSD cards and Intel Xeon E5-2690 CPUs with the goal of achieving 1M mixed ops/sec on a 95% read / 5% update workload. We used the standard YCSB parameters: 13 byte keys and 1KB data size (1,102 bytes after serialization). The maximum database size was 2 billion records, or approximately 2 TB of data. We sized the shards to ensure that this was not an "in-memory" test (i.e. the data portion of the B-Trees did not fit into memory). All updates were durable and used the "simple majority" replica ack policy, effectively 'committing to the network'. All read operations used the Consistency.NONE_REQUIRED parameter allowing reads to be performed on any replica. In the past we have achieved 100K ops/sec using SSD cards on a single shard cluster (replication factor 3) so for this test we used 10 shards on 15 Storage Nodes with each SN carrying 2 Rep Nodes and each RN assigned to its own SSD card. After correcting a scaling problem in YCSB, we blew past the 1M ops/sec mark with 8 shards and proceeded to hit 1.2M ops/sec with 10 shards. Hardware Configuration We used 15 servers, each configured with two 335 GB SSD cards. We did not have homogeneous CPUs across all 15 servers available to us so 12 of the 15 were Xeon E5-2690, 2.9 GHz, 2 sockets, 32 threads, 193 GB RAM, and the other 3 were Xeon E5-2680, 2.7 GHz, 2 sockets, 32 threads, 193 GB RAM. There might have been some upside in having all 15 machines configured with the faster CPU, but since CPU was not the limiting factor we don't believe the improvement would be significant. The client machines were Xeon X5670, 2.93 GHz, 2 sockets, 24 threads, 96 GB RAM. Although the clients had 96 GB of RAM, neither the NoSQL Database or YCSB clients require anywhere near that amount of memory and the test could have just easily been run with much less. Networking was all 10GigE. YCSB Scaling Problem We made three modifications to the YCSB benchmark. The first was to allow the test to accommodate more than 2 billion records (effectively int's vs long's). To keep the key size constant, we changed the code to use base 32 for the user ids. The second change involved to the way we run the YCSB client in order to make the test itself horizontally scalable.The basic problem has to do with the way the YCSB test creates its Zipfian distribution of keys which is intended to model "real" loads by generating clusters of key collisions. Unfortunately, the percentage of collisions on the most contentious keys remains the same even as the number of keys in the database increases. As we scale up the load, the number of collisions on those keys increases as well, eventually exceeding the capacity of the single server used for a given key.This is not a workload that is realistic or amenable to horizontal scaling. YCSB does provide alternate key distribution algorithms so this is not a shortcoming of YCSB in general. We decided that a better model would be for the key collisions to be limited to a given YCSB client process. That way, as additional YCSB client processes (i.e. additional load) are added, they each maintain the same number of collisions they encounter themselves, but do not increase the number of collisions on a single key in the entire store. We added client processes proportionally to the number of records in the database (and therefore the number of shards). This change to the use of YCSB better models a use case where new groups of users are likely to access either just their own entries, or entries within their own subgroups, rather than all users showing the same interest in a single global collection of keys. If an application finds every user having the same likelihood of wanting to modify a single global key, that application has no real hope of getting horizontal scaling. Finally, we used read/modify/write (also known as "Compare And Set") style updates during the mixed phase. This uses versioned operations to make sure that no updates are lost. This mode of operation provides better application behavior than the way we have typically run YCSB in the past, and is only practical at scale because we eliminated the shared key collision hotspots.It is also a more realistic testing scenario. To reiterate, all updates used a simple majority replica ack policy making them durable. Scalability Results In the table below, the "KVS Size" column is the number of records with the number of shards and the replication factor. Hence, the first row indicates 400m total records in the NoSQL Database (KV Store), 2 shards, and a replication factor of 3. The "Clients" column indicates the number of YCSB client processes. "Threads" is the number of threads per process with the total number of threads. Hence, 90 threads per YCSB process for a total of 360 threads. The client processes were distributed across 10 client machines. Shards KVS Size Clients Mixed (records) Threads OverallThroughput(ops/sec) Read Latencyav/95%/99%(ms) Write Latencyav/95%/99%(ms) 2 400m(2x3) 4 90(360) 302,152 0.76/1/3 3.08/8/35 4 800m(4x3) 8 90(720) 558,569 0.79/1/4 3.82/16/45 8 1600m(8x3) 16 90(1440) 1,028,868 0.85/2/5 4.29/21/51 10 2000m(10x3) 20 90(1800) 1,244,550 0.88/2/6 4.47/23/53

Read the article

Rebuilding CoasterBuzz, Part IV: Dependency injection, it's what's for breakfast

- by Jeff

(Repost from my personal blog.) This is another post in a series about rebuilding one of my Web sites, which has been around for 12 years. I hope to relaunch soon. More: Part I: Evolution, and death to WCF Part II: Hot data objects Part III: The architecture using the "Web stack of love" If anything generally good for the craft has come out of the rise of ASP.NET MVC, it's that people are more likely to use dependency injection, and loosely couple the pieces parts of their applications. A lot of the emphasis on coding this way has been to facilitate unit testing, and that's awesome. Unit testing makes me feel a lot less like a hack, and a lot more confident in what I'm doing. Dependency injection is pretty straight forward. It says, "Given an instance of this class, I need instances of other classes, defined not by their concrete implementations, but their interfaces." Probably the first place a developer exercises this in when having a class talk to some kind of data repository. For a very simple example, pretend the FooService has to get some Foo. It looks like this: public class FooService { public FooService(IFooRepository fooRepo) { _fooRepo = fooRepo; } private readonly IFooRepository _fooRepo; public Foo GetMeFoo() { return _fooRepo.FooFromDatabase(); } } When we need the FooService, we ask the dependency container to get it for us. It says, "You'll need an IFooRepository in that, so let me see what that's mapped to, and put it in there for you." Why is this good for you? It's good because your FooService doesn't know or care about how you get some foo. You can stub out what the methods and properties on a fake IFooRepository might return, and test just the FooService. I don't want to get too far into unit testing, but it's the most commonly cited reason to use DI containers in MVC. What I wanted to mention is how there's another benefit in a project like mine, where I have to glue together a bunch of stuff. For example, when I have someone sign up for a new account on CoasterBuzz, I'm actually using POP Forums' new account mailer, which composes a bunch of text that includes a link to verify your account. The thing is, I want to use custom text and some other logic that's specific to CoasterBuzz. To accomplish this, I make a new class that inherits from the forum's NewAccountMailer, and override some stuff. Easy enough. Then I use Ninject, the DI container I'm using, to unbind the forum's implementation, and substitute my own. Ninject uses something called a NinjectModule to bind interfaces to concrete implementations. The forum has its own module, and then the CoasterBuzz module is loaded second. The CB module has two lines of code to swap out the mailer implementation: Unbind<PopForums.Email.INewAccountMailer>(); Bind<PopForums.Email.INewAccountMailer>().To<CbNewAccountMailer>(); Piece of cake! Now, when code asks the DI container for an INewAccountMailer, it gets my custom implementation instead. This is a lot easier to deal with than some of the alternatives. I could do some copy-paste, but then I'm not using well-tested code from the forum. I could write stuff from scratch, but then I'm throwing away a bunch of logic I've already written (in this case, stuff around e-mail, e-mail settings, mail delivery failures). There are other places where the DI container comes in handy. For example, CoasterBuzz does a number of custom things with user profiles, and special content for paid members. It uses the forum as the core piece to managing users, so I can ask the container to get me instances of classes that do user lookups, for example, and have zero care about how the forum handles database calls, configuration, etc. What a great world to live in, compared to ten years ago. Sure, the primary interest in DI is around the "separation of concerns" and facilitating unit testing, but as your library grows and you use more open source, it starts to be the glue that pulls everything together.

Read the article

Private Cloud: Putting some method behind the madness

- by Sudip Datta

Finally, I decided to join the blogging community. And what could be a better time to start than the week after OpenWorld 2012. 50K+ attendees, demonstrations, speaker sessions and a whole lot of buzz on Oracle Cloud..It was raining clouds in this year's Openworld. I am not here to write about Oracle's cloud strategy in general, but on Enterprise Manager's cloud management capabilities. This year's Openworld was the first after we announced the 12c Cloud Control and we were happy to share the stage with quite a few early adopters. Stay tuned for videos from our customers and partners, I will post them as they get published. I met a number of platform administrators in Oracle-DBAs, Middleware Admins, SOA Admins...The cloud has affected them all, at least to the point where it beckoned more than just curiosity..Most IT infrastructure are already heavily virtualized (on VMWare and on others including Oracle VM), and some would claim they are already on “cloud” (at least their Sysadmins told them so). But none of them were confident of the benefits because their pain points continued to grow.. Isn't cloud supposed to ease those? Instead, they were chasing hundreds of databases running on hundreds of VMs, often with as much certainty propounded by Heisenberg. What happened to the age-old IT discipline around administration, compliance, configuration management? VMs are great for what they are. I personally think they have opened the doors to new approaches in which an application stack gets provisioned and updated. In fact, Enterprise Manager 12c is possibly the only tool out there that can provision full-fledged application as VM Assemblies. In this year's Openworld, customers talked on how they provisioned RAC and Siebel assemblies, which as the techies out there know, are not trivial (hearing provisioning time for Siebel down from weeks to hours was gratifying indeed). However, I do have an issue with a "one-size fits all" approach to cloud. In a week's span, I met several personas: Project owners requiring an EC2 like VM instance for their projects Admins needing the same for Sparc-Solaris. DBAs requiring dedicated databases for new projects APEX Developers needing just a ready-to-consume schema as a service Java Developers looking for a runtime platform QA engineers needing a fast clone of their production environment If you drill down further, you will end up peeling more layers of the details. For example, the requirements for Load testing and Functional testing are very different. For Load testing the test environment should ideally be the same as the production. You shouldn't run production on Exadata and load test on a VM; they will just not be good representations of one another. For Functional testing it does not possibly matter. DBAs seem to be at the worst affected of the lot. It seems they have been asked to choose between agile provisioning and faster runtime performance. And in some cases, it is really a Hobson's choice, because their infrastructure provider made no distinction between the OLTP application and the Virtual desktop! Sad indeed. When one looks at the portfolio of services that we already offer (vanilla IaaS, VM Assembly based PaaS, DBaaS) or have announced (Java PaaS, Instant Cloning, Schema-aaS), one can possibly think that we are trying to be the "renaissance man" ! Well I would have possibly digested that had it not been for the various personas that I described above. Getting the use cases right is very important for an application such as cloud management. We iterate and iterate over these over and over again and re-validate them in CABs (Customer Advisory Boards). We consider over the major aspects of tenancy: service placement, resource isolation (can a tenant execute an expensive SQL and run away with all the resources), quota and security. We, in Engineering, keep reminding ourselves that we are dealing with enterprise clouds. We owe it to our customer base ! In the coming posts, I will drill down more into each of the services. In the meanwhile, here are some collateral and demos for starters with EM 12c. http://www.oracle.com/technetwork/oem/cloud-mgmt/index.html Sudip Datta The views expressed here are my own and do not necessarily reflect the views of Oracle. Stay Connected: Twitter | Facebook | YouTube | Linkedin | Newsletter --

Read the article

Profiling NetBeans 7.0 Beta 2 and Reporting Problems

- by christopher.jones

With NetBeans 7.0 recently going into Beta 2 phase, now is the time to test it out properly and report issues. The development team has been squashing bugs, including memory issues with the PHP bundle.There are some great new PHP related features in NetBeans 7.0, so you know you want to try it out.If you identify something wrong with NetBeans, please report it following the guidelines http://wiki.netbeans.org/IssueReportingGuidelinesDepending on the issues, data to attach to the report is mentioned on: http://wiki.netbeans.org/FaqLogMessagesFile and http://wiki.netbeans.org/FaqProfileMeNowIf you have a memory issue then a memory dump would also be useful. Run the jmap tool for this. There is some background information on http://wiki.netbeans.org/FaqMemoryDump. Here's how I used it.First I set my environment to match the JDK used by NetBeans. In my case I am using a nightly build so the JDK is in the configuration file under $HOME/netbeans-dev-201102210501:$ egrep netbeans_jdkhome $HOME/netbeans-dev-201102210501/etc/netbeans.conf netbeans_jdkhome="/home/cjones/src/jdk1.6.0_24" $ export JAVA_HOME=/home/cjones/src/jdk1.6.0_24 $ export PATH=$JAVA_HOME/bin:$PATH Next, I found the correct process number to examine:$ ps -ef | egrep 'netbeans|jdk'cjones 23230 1 0 16:07 ? 00:00:00 /bin/bash /home/cjones/netbeans-cjones 23438 23230 2 16:07 ? 00:00:09 /home/cjones/src/jdk1.6.0_24/binFinally I used the parent JDK process as the jmap argument:$ jmap -histo:live 23438 num #instances #bytes class name---------------------------------------------- 1: 12075 9028656 [I 2: 49535 6581920 <constMethodKlass> 3: 49535 3964128 <methodKlass> 4: 80256 3840776 <symbolKlass> 5: 36093 3635336 [C 6: 5095 3341312 <constantPoolKlass> 7: 5095 2486016 <instanceKlassKlass> 8: 4325 1961432 <constantPoolCacheKlass> 9: 18729 1763976 [B 10: 59952 1438848 java.util.HashMap$Entry . . .This histogram memory report will help identify the kind of memory issues you are seeing. It may not be as complete as an often tens of megabyte jmap -dump:live,file=/tmp/nbheap.log 23438 heap dump, but is much more easily attached to a bug report.If you want to keep up to date with NetBeans, nightly builds are at: http://bits.netbeans.org/download/trunk/nightly/latest/zip/

Read the article

A very useful custom component

- by Kevin Smith

Whenever I am debugging a problem in WebCenter Content (WCC) I often find it useful to see the contents of the internal data binder used by WCC when executing a service. I want to know the value of all parameters passed in by the caller, either a user in the web GUI or from an application calling the service via RIDC or web services. I also want to the know the value of binder variables calculated by WCC as it processes a service. What defaults has it applied based on configuration settings or profile rules? What values has it derived based on the user input? To help with this I created a component that uses a java filter to dump out the contents of the internal data binder to the WCC trace file. It dumps the binder contents using the toString() method. You can register this filter code using many different filter hooks to see how the binder is updated as WCC processes the service. By default, it uses the validateStandard filter hook which is useful during a CHECKIN service. It uses the system trace section, so make sure that trace section is enabled before looking for the output from this component. Here is some sample output>system/6 10.09 09:57:40.648 IdcServer-1 filter: postParseDataForServiceRequest, binder start -- system/6 10.09 09:57:40.698 IdcServer-1 *** LocalData *** system/6 10.09 09:57:40.698 IdcServer-1 (10 keys + 0 defaults) system/6 10.09 09:57:40.698 IdcServer-1 ClientEncoding=UTF-8 system/6 10.09 09:57:40.698 IdcServer-1 IdcService=CHECKIN_UNIVERSAL system/6 10.09 09:57:40.698 IdcServer-1 NoHttpHeaders=0 system/6 10.09 09:57:40.698 IdcServer-1 UserDateFormat=iso8601 system/6 10.09 09:57:40.698 IdcServer-1 UserTimeZone=UTC system/6 10.09 09:57:40.698 IdcServer-1 dDocTitle=Check in from RIDC using Framework Folder system/6 10.09 09:57:40.698 IdcServer-1 dDocType=Document system/6 10.09 09:57:40.698 IdcServer-1 dSecurityGroup=Public system/6 10.09 09:57:40.698 IdcServer-1 parentFolderPath=/folder1/folder2 system/6 10.09 09:57:40.698 IdcServer-1 primaryFile=testfile5.bin system/6 10.09 09:57:40.698 IdcServer-1 *** RESULT SETS ***>system/6 10.09 09:57:40.698 IdcServer-1 binder end -------------------------------------------- See the readme included in the component for more details. You can download the component from here.

Read the article

Trouble with Samba Domain

- by Arkevius

I'm having a bit of trouble setting up this Samba domain correctly. I'm getting an Access Denied error when trying to add a Windows XP machine to the domain. I'll go through my scenario in detail, but for those of you wanting a TLDR summary it'll be at the bottom of this post. I have HP Proliant server with Ubuntu 12.04 LTS installed. For this particular environment, I need this server to act as a PDC, file server, and print server. I began by updating and upgrading the packages (of course). Then went to install samba, gnome-desktop, wine, and cpanm. Samba was, of course, for the PDC and file/print services. The GUI was needed because a certain software has to be installed on there that needs a GUI. Wine was needed because the software is Windows-native. And cpanm was for a perl script I have running. For Samba, I went into the smb.conf file and enabled domain logons, changed the workgroup/domain name, the logon script for a per-group basis (netlogon/%g), enabled the netlogon and profiles share, and setup a couple of custom shares for the file service. The printer was added later, and seems to be working just fine. I then restarted the services, and used the net groupmap command to ensure my unix groups were mapped correctly to the Windows groups. After this, I went to a Windows box, and was able to successfully join the domain without a problem. After some fidgeting with the software to get it running on the win boxes from the server (it's a records management system program, which stores it's database files on the server), I went to add another computer to the domain. But now it's saying Access Denied. Before when I had this trouble it was because I forgot to add the group "machines" so Samba could create machine accounts. Thinking this was the case, I manually created the machine account to test this theory. However, it would still give me an Access Denied error. That must mean it has something to do with permissions now, correct? I've been fighting with this server for the past two weeks. If it's not one thing that;s wrong, then it's something else completely different. This would be the third time I've actually reinstalled everything to start over. I'll post snippets of my system settings below. If anything else is needed, just say the word and I'll gather up the info. The unix group 'domadmin' is the Domain Admins group. Samba Administrator account administrator:x:1000:1000:Administrator,,,:/home/administrator:/bin/bash Adminstrator's groups administrator adm cdrom sudo dip plugdev lpadmin sambashare domadmin crimestar Samba's Configuration FIle (a snippet anyways) [global] workgroup = CITYPD server string = BPDServer dns proxy = no log file = /var/log/samba/log.%m max log size = 1000 syslog = 0 panic action = /usr/share/samba/panic-action %d security = user encrypt passwords = true passdb backend = tdbsam obey pam restrictions = yes unix password sync = yes passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . pam password change = yes map to guest = bad user domain logons = yes logon path = \\%L\srv\samba\profiles\%U logon script = logon.bat add machine script = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u domain master = yes usershare allow guests = yes [netlogon] comment = Network Logon Service path = /srv/samba/netlogon/%g guest ok = yes read only = yes browseable = no [profiles] comment = All Printers browseable = no path = /var/spool/samba printable = yes guest ok = no read only = yes create mask = 0700 [print$] comment = Printer Drivers path = /var/lib/samba/printers browseable = yes read only = yes guest ok = no write list = root, @lpadmin [crimestar] comment = "Crimestar DB" path = /srv/crimestar/db valid users = @domadmin, @crimestar admin users = administrator writeable = yes guest ok = no browseable = no create mask = 0666 directory mask = 0777 [crimestarfiles] path = /home/administrator/.wine/drive_c/crimestar admin users = administrator browseable = yes ls -la on /srv/samba/profiles drwxrwxrwx 2 root machines 4096 Nov 21 15:27 . drwxr-xr-x 4 root root 4096 Nov 21 15:28 .. ls -la on /srv/samba/netlogon drwxr-xr-x 6 root root 4096 Nov 21 15:30 . drwxr-xr-x 4 root root 4096 Nov 21 15:28 .. drwxr-xr-x 2 root root 4096 Nov 21 15:30 crimestar drwxr-xr-x 2 root root 4096 Nov 21 18:13 domadmin drwxr-xr-x 3 root root 4096 Nov 21 15:30 guests drwxr-xr-x 2 root root 4096 Nov 21 15:29 users GrouMap list Domain Users (S-1-5-21-2978508755-2341913247-928297747-513) -> users Domain Admins (S-1-5-21-2978508755-2341913247-928297747-512) -> domadmin Domain Guests (S-1-5-21-2978508755-2341913247-928297747-514) -> nogroup TLDR I'm getting an Access Denied error message while trying to join a windows box to a samba domain, even after I successfully joined another computer without a problem. System settings / files are quoted above. Anyone have any ideas or suggestions?

Read the article

Application Composer: Exposing Your Customizations in BI Analytics and Reporting

- by Richard Bingham

Introduction This article explains in simple terms how to ensure the customizations and extensions you have made to your Fusion Applications are available for use in reporting and analytics. It also includes four embedded demo videos from our YouTube channel (if they don't appear check the browser address bar for a blocking shield icon). If you are new to Business Intelligence consider first reviewing our getting started article, and you can read more about the topic of custom subject areas in the documentation book Extending Sales. There are essentially four sections to this post. First we look at how custom fields added to standard objects are made available for reporting. Secondly we look at creating custom subject areas on the standard objects. Next we consider reporting on custom objects, starting with simple standalone objects, then child custom objects, and finally custom objects with relationships. Finally this article reviews how flexfields are exposed for reporting. Whilst this article applies to both Cloud/SaaS and on-premises deployments, if you are an on-premises developer then you can also use the BI Administration Tool to customize your BI metadata repository (the RPD) and create new subject areas. Whilst this is not covered here you can read more in Chapter 8 of the Extensibility Guide for Developers. Custom Fields on Standard Objects If you add a custom field to your standard object then it's likely you'll want to include it in your reports. This is very simple, since all new fields are instantly available in the "[objectName] Extension" folder in existing subject areas. The following two minute video demonstrates this. Custom Subject Areas for Standard Objects You can create your own subject areas for use in analytics and reporting via Application Composer. An example use-case could be to simplify the seeded subject areas, since they sometimes contain complex data fields and internal values that could confuse business users. One thing to note is that you cannot create subject areas in a sandbox, as it is not supported by BI, so once your custom object is tested and complete you'll need to publish the sandbox before moving forwards. The subject area creation processes is essentially two-fold. Once the request is submitted the ADF artifacts are generated, then secondly the related metadata is sent to the BI presentation server API's to make the updates there. One thing to note is that this second step may take up to ten minutes to complete. Once finished the status of the custom subject area request should show as 'OK' and it is then ready for use. Within the creation processes wizard-like steps there are three concepts worth highlighting: Date Flattening - this feature permits the roll up of reports at various date levels, such as data by week, month, quarter, or year. You simply check the box to enable it for that date field. Measures - these are your own functions that you can build into the custom subject area. They are related to the field data type and include min-max for dates, and sum(), avg(), and count() for numeric fields. Implicit Facts - used to make the BI metadata join between your object fields and the calculated measure fields. The advice is to choose the most frequently used measure to ensure consistency. This video shows a simple example, where a simplified subject area is created for the customer 'Contact' standard object, picking just a few fields upon which users can then create reports. Custom Objects Custom subject areas support three types of custom objects. First is a simple standalone custom object and for which the same process mentioned above applies. The next is a custom child object created on a standard object parent, and finally a custom object that is related to a parent object - usually through a dynamic choice list. Whilst the steps in each of these last two are mostly the same, there are differences in the way you choose the objects and their fields. This is illustrated in the videos below.The first video shows the process for creating a custom subject area for a simple standalone custom object. This second video demonstrates how to create custom subject areas for custom objects that are of parent:child type, as well as those those with dynamic-choice-list relationships. <span id="XinhaEditingPostion"></span> Flexfields Dynamic and Extensible Flexfields satisfy a similar requirement as custom fields (for Application Composer), with flexfields common across the Fusion Financials, Supply Chain and Procurement, and HCM applications. The basic principle is when you enable and configure your flexfields, in the edit page under each segment region (for both global and context segments) there is a BI Enabled check box. Once this is checked and you've completed your configuration, you run the Scheduled Process job named 'Import Oracle Fusion Data Extensions for Transactional Business Intelligence' to generate and migrate the related BI artifacts and data. This applies for dynamic, key, and extensible flexfields. Of course there is more to consider in terms of how you wish your flexfields to be implemented and exposed in your reports, and details are given in Chapter 4 of the Extending Applications guide.

Read the article

Synergy - easy share of keyboard and mouse between multiple computers

Did you ever have the urge to share one set of keyboard and mouse between multiple machines? If so, please read on... Using multiple machines Honestly, as a software craftsman it is my daily business to run multiple machines - either physical or virtual - to be able to solve my customers' requirements. Recent hardware equipment allows this very easily. For laptops it's a no-brainer to attach a second or even a third screen in order to extend your native display. This works quite handy and in my case I used to attached two additional screens - one via HD15 connector, the other via HDMI. But... as it's a laptop and therefore a mobile unit there are slight restrictions. Detaching and re-attaching all cables when changing locations is one of them but hardware limitations, too. After all, it's a laptop and not a workstation. I guess, that anyone working in IT (or ICT) has more than one machine at their workplace or their home office and at least I find it quite annoying to have multiple sets of keyboard and mouse conquering my remaining space on my desk. Despite the ugly looks of all those cables and whatsoever 'chaos of distraction' I prefer a more clean solution and working environment. This allows me to actually focus on my work and tasks to do rather than to worry about choosing the right combination of keyboard/mouse. My current workplace is a patch work of various pieces of hardware (approx. 2-3 years): DIY desktop on Ubuntu 12.04 64-bit, Core2 Duo (E7400, 2.8GHz), 4GB RAM, 2x 250GB HDD, nVidia GPU 512MB Dell Inspiron 1525 on Windows 8 64-bit, 4GB RAM, 200GB HDD HP Compaq 6720s on Windows Vista 32-bit, Core2 Duo (T5670, 1.8GHz), 2GB RAM, 160GB HDD Mac mini on Mac OS X 10.7, Core i5 (2.3 GHz), 2GB RAM, 500GB HDD I know... Not the latest and greatest but a decent combination to work with. New system(s) is/are already on the shopping list but I live in the 'wrong' country to buy computer hardware. So, the next trip abroad will provide me with some new stuff. Using multiple operating systems The list of hardware above already names different operating systems, and actually I have only one preference: Linux. But still my job as a software craftsman for Visual FoxPro and .NET development requires other OSes, too. Not a big deal, it's just like this. Additionally to those physical machines, there are a bunch of virtual machines around. Most of them running either Windows XP or Windows 7. Since years I have the practice that each development for one customer is isolated into its own virtual machine and environment. This keeps it clean and version-safe. But as you can easily imagine with that setup there are a couple of constraints referring to keyboard and mouse. Usually, those systems require their own pieces of hardware attached. As stated, I don't like clutter on my desk's surface, so a cross-platform solution has to come in here. In the past, I tried it with various applications, hardware or network protocols like X11, RDP, NX, TeamViewer, RAdmin, KVM switch, etc. but the problem in this case is that they either allow you to remotely connect to the other system or exclusively 'bind' your peripherals to the active system. Not optimal after all. Synergy to the rescue Quote from their website: "Synergy lets you easily share your mouse and keyboard between multiple computers on your desk, and it's Free and Open Source. Just move your mouse off the edge of one computer's screen on to another. You can even share all of your clipboards. All you need is a network connection. Synergy is cross-platform (works on Windows, Mac OS X and Linux)." Yep, that's it! All I need for my setup here... Actually, I couldn't believe it myself that I didn't stumble over synergy earlier but 'Get over it' and there we go. And despite the fact that it is Open Source, no, it's also for free. Donations for the developers are very welcome and recently they introduced Synergy Premium. A possibility to buy so-called premium votes that can be used to put more weight / importance on specific issues or bugs that you would like the developers to look into. Installation and configuration Simply download the installation packages for your systems of choice, run the installer and enter some minor information about your network setup. I chose my desktop machine for the role of the Synergy server and configured my screen setup as follows: The screen setup allows you currently to build or connect up to 15 machines. The number of screens can be higher as those machine might have multiple screens physically attached. Synergy takes this into the overall calculations and simply works as expected. I tried it for fun with a second monitor each connected to both laptops to have a total number of 6 active screens. No flaws after all - stunning! All the other machines are configured as clients like so: Side note: The screenshot was taken on Windows 8 and pasted via clipboard into Gimp running on Ubuntu. Resume Synergy is now definitely in my box of tools for my daily work, and amongst the first pieces of software I install after the operating system. It just simplifies my life and cleans my desk. Never again without Synergy!Now, only waiting for an Android version to integrate my Galaxy Tab 10.1, too. ;-) Please, check out that superb product and enjoy sharing one keyboard, one mouse and one clipboard between your various machines and operating systems.

Read the article

Microsoft Sql Server 2008 R2 System Databases

For a majority of software developers little time is spent understanding the inner workings of the database management systems (DBMS) they use to store data for their applications. I personally place myself in this grouping. In my case, I have used various versions of Microsoft’s SQL Server (2000, 2005, and 2008 R2) and just recently learned how valuable they really are when I was preparing to deliver a lecture on "SQL Server 2008 R2, System Databases". Microsoft Sql Server 2008 R2 System DatabasesSo what are system databases in MS SQL Server, and why should I know them? Microsoft uses system databases to support the SQL Server DBMS, much like a developer uses config files or database tables to support an application. These system databases individually provide specific functionality that allows MS SQL Server to function. Name Database File Log File Master master.mdf mastlog.ldf Resource mssqlsystemresource.mdf mssqlsystemresource.ldf Model model.mdf modellog.ldf MSDB msdbdata.mdf msdblog.ldf Distribution distmdl.mdf distmdl.ldf TempDB tempdb.mdf templog.ldf Master DatabaseIf you have used MS SQL Server then you should recognize the Master database especially if you used the SQL Server Management Studio (SSMS) to connect to a user created database. MS SQL Server requires the Master database in order for DBMS to start due to the information that it stores. Examples of data stored in the Master database User Logins Linked Servers Configuration information Information on User Databases Resource DatabaseHonestly, until recently I never knew this database even existed until I started to research SQL Server system databases. The reason for this is due largely to the fact that the resource database is hidden to users. In fact, the database files are stored within the Binn folder instead of the standard MS SQL Server database folder path. This database contains all system objects that can be accessed by all other databases. In short, this database contains all system views and store procedures that appear in all other user databases regarding system information. One of the many benefits to storing system views and store procedures in a single hidden database is the fact it improves upgrading a SQL Server database; not to mention that maintenance is decreased since only one code base has to be mainlined for all of the system views and procedures. Model DatabaseThe Model database as the name implies is the model for all new databases created by users. This allows for predefining default database objects for all new databases within a MS SQL Server instance. For example, if every database created by a user needs to have an “Audit” table when it is created then defining the “Audit” table in the model will guarantees that the table will be located in every new database create after the model is altered. MSDB DatabaseThe MSDBdatabase is used by SQL Server Agent, SQL Server Database Mail, SQL Server Service Broker, along with SQL Server. The SQL Server Agent uses this database to store job configurations and SQL job schedules along with SQL Alerts, and Operators. In addition, this database also stores all SQL job parameters along with each job’s execution history. Finally, this database is also used to store database backup and maintenance plans as well as details pertaining to SQL Log shipping if it is being used. Distribution DatabaseThe Distribution database is only used during replication and stores meta data and history information pertaining to the act of replication data. Furthermore, when transactional replication is used this database also stores information regarding each transaction. It is important to note that replication is not turned on by default in MS SQL Server and that the distribution database is hidden from SSMS. Tempdb DatabaseThe Tempdb as the name implies is used to store temporary data and data objects. Examples of this include temp tables and temp store procedures. It is important to note that when using this database all data and data objects are cleared from this database when SQL Server restarts. This database is also used by SQL Server when it is performing some internal operations. Typically, SQL Server uses this database for the purpose of large sort and index operations. Finally, this database is used to store row versions if row versioning or snapsot isolation transactions are being used by SQL Server. Additionally, I would love to hear from others about their experiences using system databases, tables, and objects in a real world environments.

Read the article

Why won't USB 3.0 external hard drive run at USB 3.0 speeds?

- by jgottula

I recently purchased a PCI Express x1 USB 3.0 controller card (containing the NEC USB 3.0 controller) with the intent of using a USB 3.0 external hard drive with my Linux box. I installed the card in an empty PCIe slot on my motherboard, connected the card to a power cable, strung a USB 3.0 cable between one of the new ports and my external HDD, and connected the HDD to a wall socket for power. Booting the system, the drive works 100% as intended, with the one exception of throughput: rather than using SuperSpeed 4.8 Gbps connectivity, it seems to be falling back to High Speed 480 Mbps USB 2.0-style throughput. Disk Utility shows it as a 480 Mbps device, and running a couple Disk Utility and dd benchmarks confirms that the drive fails to exceed ~40 MB/s (the approximate limit of USB 2.0), despite it being an SSD capable of far more than that. When I connect my USB 3.0 HDD, dmesg shows this: [ 3923.280018] usb 3-2: new high speed USB device using ehci_hcd and address 6 where I would expect to find this: [ 3923.280018] usb 3-2: new SuperSpeed USB device using xhci_hcd and address 6 My system was running on kernel 2.6.35-25-generic at the time. Then, I stumbled upon this forum thread by an individual who found that a bug, which was present in kernels prior to 2.6.37-rc5, could be the culprit for this type of problem. Consequently, I installed the 2.6.37-generic mainline Ubuntu kernel to determine if the problem would go away. It didn't, so I tried 2.6.38-rc3-generic, and even the 2.6.38 nightly from 2010.02.01, to no avail. In short, I'm trying to determine why, with USB 3.0 support in the kernel, my USB 3.0 drive fails to run at full SuperSpeed throughput. See the comments under this question for additional details. Output that might be relevant to the problem (when booting from 2.6.38-rc3): Relevant lines from dmesg: [ 19.589491] xhci_hcd 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 19.589512] xhci_hcd 0000:03:00.0: setting latency timer to 64 [ 19.589516] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 19.589623] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 12 [ 19.650492] xhci_hcd 0000:03:00.0: irq 17, io mem 0xf8100000 [ 19.650556] xhci_hcd 0000:03:00.0: irq 47 for MSI/MSI-X [ 19.650560] xhci_hcd 0000:03:00.0: irq 48 for MSI/MSI-X [ 19.650563] xhci_hcd 0000:03:00.0: irq 49 for MSI/MSI-X [ 19.653946] xHCI xhci_add_endpoint called for root hub [ 19.653948] xHCI xhci_check_bandwidth called for root hub Relevant section of sudo lspci -v: 03:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) (prog-if 30) Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at f8100000 (64-bit, non-prefetchable) [size=8K] Capabilities: [50] Power Management version 3 Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [90] MSI-X: Enable+ Count=8 Masked- Capabilities: [a0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number ff-ff-ff-ff-ff-ff-ff-ff Capabilities: [150] #18 Kernel driver in use: xhci_hcd Kernel modules: xhci-hcd Relevant section of sudo lsusb -v: Bus 012 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 3 bMaxPacketSize0 9 idVendor 0x1d6b Linux Foundation idProduct 0x0003 3.0 root hub bcdDevice 2.06 iManufacturer 3 Linux 2.6.38-020638rc3-generic xhci_hcd iProduct 2 xHCI Host Controller iSerial 1 0000:03:00.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 4 wHubCharacteristic 0x0009 Per-port power switching Per-port overcurrent protection TT think time 8 FS bits bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled Full, non-verbose lsusb: Bus 012 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 011 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 009 Device 003: ID 04d9:0702 Holtek Semiconductor, Inc. Bus 009 Device 002: ID 046d:c068 Logitech, Inc. G500 Laser Mouse Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 006: ID 174c:5106 ASMedia Technology Inc. Bus 003 Device 004: ID 0bda:0151 Realtek Semiconductor Corp. Mass Storage Device (Multicard Reader) Bus 003 Device 002: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 006: ID 1687:0163 Kingmax Digital Inc. Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 046d:081b Logitech, Inc. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Full output: full dmesg full lspci full lsusb

Read the article

Tip #19 Module Private Visibility in OSGi

- by ByronNevins

I hate public and protected methods and classes. It requires so much work to change them in a huge project like GlassFish. Not to mention that you may well have to support those APIs forever. They are highly overused in GlassFish. In fact I'd bet that > 95% of classes are marked as public for no good reason. It's just (bad) habit is my guess. private and default visibility (I call it package-private) is easier to maintain. It is much much easier to change such classes and methods around. If you have ANY public method or public class in GlassFish you'll need to grep through a tremendous amount of source code to find all callers. But even that won't be theoretically reliable. What if a caller is using reflection to access public methods? You may never find such usages. If you have package private methods, it's easy. Simply grep through all the code in that one package. As long as that package compiles ok you're all set. There can' be any compile errors anywhere else. It's a waste of time to even look around or build the "outside" world. So you may be thinking: "Aha! I'll just make my module have one giant package with all the java files. Then I can use the default visibility and maintenance will be much easier. But there's a problem. You are wasting a very nice feature of java -- organizing code into separate packages. It also makes the code much more encapsulated. Unfortunately to share code between the packages you have no choice but to declare public visibility. What happens in practice is that a module ends up having tons of public classes and methods that are used exclusively inside the module. Which finally brings me to the point of this blog: If Only There Was A Module-Private Visibility Available Well, surprise! There is such a mechanism. If your project is running under OSGi that is. Like GlassFish does! With this mechanism you can easily add another level of visibility by telling OSGi exactly which public you want to be exposed outside of the module. You get the best of both worlds: Better encapsulation of your code so that maintenance is easier and productivity is increased. Usage of public visibility inside the module so that you can encapsulate intra-module better with packages. How I do this in GlassFish: Carefully plan out at least one package that will contain "true" publics. This is the package that will be exported by OSGi. I recommend just one package. Here is how to tell OSGi to use it in GlassFish -- edit osgi.bundle like so:-exportcontents: org.glassfish.mymodule.truepublics; version=${project.osgi.version} Now all publics declared in any other packages will be visible module-wide but not outside the module. There is one caveat: Accessing "module-private" items outside of the module is controlled at run-time, not compile-time. The compiler has no clue that a public in a dependent module isn't really public. it will happily compile it. At runtime you will definitely see fireworks. The good news is that you don't have to wait for the code path that tries to use the "module-private" items to fire. OSGi will complain loudly when that module gets loaded. OSGi will refuse to load it. You will see an error like this: remote failure: Error while loading FOO: Exception while adding the new configuration : Error occurred during deployment: Exception while loading the app : org.osgi.framework.BundleException: Unresolved constraint in bundle com.oracle.glassfish.miscreant.code [115]: Unable to resolve 115.0: missing requirement [115.0] osgi.wiring.package; (osgi.wiring.package=org.glassfish.mymodule.unexported). Please see server.log for more details. That is if you accidentally change code in module B to use a public that is really a "module-private" in module A, then you will see the error immediately when you try to test whatever you were changing in module B.

Read the article

Microsoft Sql Server 2008 R2 System Databases

For a majority of software developers little time is spent understanding the inner workings of the database management systems (DBMS) they use to store data for their applications. I personally place myself in this grouping. In my case, I have used various versions of Microsoft’s SQL Server (2000, 2005, and 2008 R2) and just recently learned how valuable they really are when I was preparing to deliver a lecture on "SQL Server 2008 R2, System Databases". Microsoft Sql Server 2008 R2 System DatabasesSo what are system databases in MS SQL Server, and why should I know them? Microsoft uses system databases to support the SQL Server DBMS, much like a developer uses config files or database tables to support an application. These system databases individually provide specific functionality that allows MS SQL Server to function. Name Database File Log File Master master.mdf mastlog.ldf Resource mssqlsystemresource.mdf mssqlsystemresource.ldf Model model.mdf modellog.ldf MSDB msdbdata.mdf msdblog.ldf Distribution distmdl.mdf distmdl.ldf TempDB tempdb.mdf templog.ldf Master DatabaseIf you have used MS SQL Server then you should recognize the Master database especially if you used the SQL Server Management Studio (SSMS) to connect to a user created database. MS SQL Server requires the Master database in order for DBMS to start due to the information that it stores. Examples of data stored in the Master database User Logins Linked Servers Configuration information Information on User Databases Resource DatabaseHonestly, until recently I never knew this database even existed until I started to research SQL Server system databases. The reason for this is due largely to the fact that the resource database is hidden to users. In fact, the database files are stored within the Binn folder instead of the standard MS SQL Server database folder path. This database contains all system objects that can be accessed by all other databases. In short, this database contains all system views and store procedures that appear in all other user databases regarding system information. One of the many benefits to storing system views and store procedures in a single hidden database is the fact it improves upgrading a SQL Server database; not to mention that maintenance is decreased since only one code base has to be mainlined for all of the system views and procedures. Model DatabaseThe Model database as the name implies is the model for all new databases created by users. This allows for predefining default database objects for all new databases within a MS SQL Server instance. For example, if every database created by a user needs to have an “Audit” table when it is created then defining the “Audit” table in the model will guarantees that the table will be located in every new database create after the model is altered. MSDB DatabaseThe MSDBdatabase is used by SQL Server Agent, SQL Server Database Mail, SQL Server Service Broker, along with SQL Server. The SQL Server Agent uses this database to store job configurations and SQL job schedules along with SQL Alerts, and Operators. In addition, this database also stores all SQL job parameters along with each job’s execution history. Finally, this database is also used to store database backup and maintenance plans as well as details pertaining to SQL Log shipping if it is being used. Distribution DatabaseThe Distribution database is only used during replication and stores meta data and history information pertaining to the act of replication data. Furthermore, when transactional replication is used this database also stores information regarding each transaction. It is important to note that replication is not turned on by default in MS SQL Server and that the distribution database is hidden from SSMS. Tempdb DatabaseThe Tempdb as the name implies is used to store temporary data and data objects. Examples of this include temp tables and temp store procedures. It is important to note that when using this database all data and data objects are cleared from this database when SQL Server restarts. This database is also used by SQL Server when it is performing some internal operations. Typically, SQL Server uses this database for the purpose of large sort and index operations. Finally, this database is used to store row versions if row versioning or snapsot isolation transactions are being used by SQL Server. Additionally, I would love to hear from others about their experiences using system databases, tables, and objects in a real world environments.

Read the article

"LNK2001: unresolved external symbol" when trying to build my program

- by random

I get the following error(s) on my program that captures the mouse and then draws a line. Errors: 1>------ Build started: Project: Capture_Mouse_Line, Configuration: Debug Win32 ------ 1> main.cpp 1>main.obj : error LNK2001: unresolved external symbol "public: static long * Line::yc2" (?yc2@Line@@2PAJA) 1>main.obj : error LNK2001: unresolved external symbol "public: static long * Line::xc2" (?xc2@Line@@2PAJA) 1>main.obj : error LNK2001: unresolved external symbol "public: static long * Line::yc1" (?yc1@Line@@2PAJA) 1>main.obj : error LNK2001: unresolved external symbol "public: static long * Line::xc1" (?xc1@Line@@2PAJA) 1>MSVCRTD.lib(crtexe.obj) : error LNK2019: unresolved external symbol _main referenced in function ___tmainCRTStartup 1>D:\Visual C++ Projects\Capture_Mouse_Line\Debug\Capture_Mouse_Line.exe : fatal error LNK1120: 5 unresolved externals ========== Build: 0 succeeded, 1 failed, 0 up-to-date, 0 skipped ========== Here is my code: #include<allegro5\allegro.h> #include<allegro5\allegro_native_dialog.h> #include<allegro5\allegro_primitives.h> #include<Windows.h> #include<allegro5\allegro_windows.h> #ifndef WIDTH #define WIDTH 1440 #endif #ifndef HEIGHT #define HEIGHT 900 #endif class Line { public: static void ErasePreviousLine(); static void DrawLine(long* x, long* y,long* x2,long* y2); static bool Erasable(); static long* xc1; static long* yc1; static long* xc2; static long* yc2; }; void Line::ErasePreviousLine() { delete xc1; xc1 = NULL; delete yc1; yc1 = NULL; delete xc2; xc2 = NULL; delete yc2; yc2 = NULL; } bool Line::Erasable() { if(xc1 && yc1 && xc2 && yc2 == NULL) { return false; } else { return true; } } void Line::DrawLine(long* x,long* y,long* x2,long* y2) { if(!al_init_primitives_addon()) { al_show_native_message_box(NULL,NULL,NULL,"failed to initialize allegro", NULL,NULL); } xc1 = x; yc1 = y; xc2 = x2; yc2 = y2; al_draw_line((float)*xc1, (float)*yc1, (float)*xc2, (float)*yc2,al_map_rgb(255,0,255), 1); delete x; delete y; delete x2; delete y2; } LRESULT CALLBACK WndProc(HWND hwnd, UINT msg, WPARAM wParam, LPARAM lParam); int WINAPI WinMain(HINSTANCE hInstance,HINSTANCE hPrevInstance, LPSTR lpCmdLine, int nCmdShow) { MSG msg; ALLEGRO_DISPLAY* display = NULL; if(!al_init()) { al_show_native_message_box(NULL,NULL,NULL,"failed to initialize allegro", NULL,NULL); return -1; } display = al_create_display(WIDTH,HEIGHT); if(!display) { al_show_native_message_box(NULL,NULL,NULL,"failed to initialize display", NULL,NULL); return -1; } HWND hwnd = al_get_win_window_handle(display); if(hwnd == NULL) { MessageBox(NULL, "Window Creation Failed!", "Error!", MB_ICONEXCLAMATION | MB_OK); return 0; } ShowWindow(hwnd, nCmdShow); UpdateWindow(hwnd); while(GetMessage(&msg, NULL, 0, 0) > 0) { TranslateMessage(&msg); DispatchMessage(&msg); } return msg.wParam; } LRESULT CALLBACK WndProc(HWND hwnd, UINT msg, WPARAM wParam, LPARAM lParam) { static bool bIsCaptured; static POINTS ptsBegin; static POINTS ptsEnd; switch(msg) { case WM_LBUTTONDOWN: SetCapture(hwnd); bIsCaptured = true; ptsBegin = MAKEPOINTS(lParam); return 0; case WM_MOUSEMOVE: if(wParam & MK_LBUTTON) { if(!Line::Erasable()) { return 0; } Line::ErasePreviousLine(); ptsEnd = MAKEPOINTS(lParam); Line::DrawLine(new long(ptsBegin.x),new long(ptsBegin.y),new long(ptsEnd.x),new long(ptsEnd.y)); } break; case WM_LBUTTONUP: bIsCaptured = false; ReleaseCapture(); break; case WM_ACTIVATEAPP: { if(wParam == TRUE) { if(bIsCaptured){ SetCapture(hwnd);} } } break; } return 0; }

Read the article

Collaborative Whiteboard using WebSocket in GlassFish 4 - Text/JSON and Binary/ArrayBuffer Data Transfer (TOTD #189)

- by arungupta

This blog has published a few blogs on using JSR 356 Reference Implementation (Tyrus) as its integrated in GlassFish 4 promoted builds. TOTD #183: Getting Started with WebSocket in GlassFish TOTD #184: Logging WebSocket Frames using Chrome Developer Tools, Net-internals and Wireshark TOTD #185: Processing Text and Binary (Blob, ArrayBuffer, ArrayBufferView) Payload in WebSocket TOTD #186: Custom Text and Binary Payloads using WebSocket One of the typical usecase for WebSocket is online collaborative games. This Tip Of The Day (TOTD) explains a sample that can be used to build such games easily. The application is a collaborative whiteboard where different shapes can be drawn in multiple colors. The shapes drawn on one browser are automatically drawn on all other peer browsers that are connected to the same endpoint. The shape, color, and coordinates of the image are transfered using a JSON structure. A browser may opt-out of sharing the figures. Alternatively any browser can send a snapshot of their existing whiteboard to all other browsers. Take a look at this video to understand how the application work and the underlying code. The complete sample code can be downloaded here. The code behind the application is also explained below. The web page (index.jsp) has a HTML5 Canvas as shown: <canvas id="myCanvas" width="150" height="150" style="border:1px solid #000000;"></canvas> And some radio buttons to choose the color and shape. By default, the shape, color, and coordinates of any figure drawn on the canvas are put in a JSON structure and sent as a message to the WebSocket endpoint. The JSON structure looks like: { "shape": "square", "color": "#FF0000", "coords": { "x": 31.59999942779541, "y": 49.91999053955078 }} The endpoint definition looks like: @WebSocketEndpoint(value = "websocket",encoders = {FigureDecoderEncoder.class},decoders = {FigureDecoderEncoder.class})public class Whiteboard { As you can see, the endpoint has decoder and encoder registered that decodes JSON to a Figure (a POJO class) and vice versa respectively. The decode method looks like: public Figure decode(String string) throws DecodeException { try { JSONObject jsonObject = new JSONObject(string); return new Figure(jsonObject); } catch (JSONException ex) { throw new DecodeException("Error parsing JSON", ex.getMessage(), ex.fillInStackTrace()); }} And the encode method looks like: public String encode(Figure figure) throws EncodeException { return figure.getJson().toString();} FigureDecoderEncoder implements both decoder and encoder functionality but thats purely for convenience. But the recommended design pattern is to keep them in separate classes. In certain cases, you may even need only one of them. On the client-side, the Canvas is initialized as: var canvas = document.getElementById("myCanvas");var context = canvas.getContext("2d");canvas.addEventListener("click", defineImage, false); The defineImage method constructs the JSON structure as shown above and sends it to the endpoint using websocket.send(). An instant snapshot of the canvas is sent using binary transfer with WebSocket. The WebSocket is initialized as: var wsUri = "ws://localhost:8080/whiteboard/websocket";var websocket = new WebSocket(wsUri);websocket.binaryType = "arraybuffer"; The important part is to set the binaryType property of WebSocket to arraybuffer. This ensures that any binary transfers using WebSocket are done using ArrayBuffer as the default type seem to be blob. The actual binary data transfer is done using the following: var image = context.getImageData(0, 0, canvas.width, canvas.height);var buffer = new ArrayBuffer(image.data.length);var bytes = new Uint8Array(buffer);for (var i=0; i<bytes.length; i++) { bytes[i] = image.data[i];}websocket.send(bytes); This comprehensive sample shows the following features of JSR 356 API: Annotation-driven endpoints Send/receive text and binary payload in WebSocket Encoders/decoders for custom text payload In addition, it also shows how images can be captured and drawn using HTML5 Canvas in a JSP. How could this be turned in to an online game ? Imagine drawing a Tic-tac-toe board on the canvas with two players playing and others watching. Then you can build access rights and controls within the application itself. Instead of sending a snapshot of the canvas on demand, a new peer joining the game could be automatically transferred the current state as well. Do you want to build this game ? I built a similar game a few years ago. Do somebody want to rewrite the game using WebSocket APIs ? :-) Many thanks to Jitu and Akshay for helping through the WebSocket internals! Here are some references for you: JSR 356: Java API for WebSocket - Specification (Early Draft) and Implementation (already integrated in GlassFish 4 promoted builds) Subsequent blogs will discuss the following topics (not necessary in that order) ... Error handling Interface-driven WebSocket endpoint Java client API Client and Server configuration Security Subprotocols Extensions Other topics from the API

Read the article

Processing Text and Binary (Blob, ArrayBuffer, ArrayBufferView) Payload in WebSocket - (TOTD #185)

- by arungupta

The WebSocket API defines different send(xxx) methods that can be used to send text and binary data. This Tip Of The Day (TOTD) will show how to send and receive text and binary data using WebSocket. TOTD #183 explains how to get started with a WebSocket endpoint using GlassFish 4. A simple endpoint from that blog looks like: @WebSocketEndpoint("/endpoint") public class MyEndpoint { public void receiveTextMessage(String message) { . . . } } A message with the first parameter of the type String is invoked when a text payload is received. The payload of the incoming WebSocket frame is mapped to this first parameter. An optional second parameter, Session, can be specified to map to the "other end" of this conversation. For example: public void receiveTextMessage(String message, Session session) { . . . } The return type is void and that means no response is returned to the client that invoked this endpoint. A response may be returned to the client in two different ways. First, set the return type to the expected type, such as: public String receiveTextMessage(String message) { String response = . . . . . . return response; } In this case a text payload is returned back to the invoking endpoint. The second way to send a response back is to use the mapped session to send response using one of the sendXXX methods in Session, when and if needed. public void receiveTextMessage(String message, Session session) { . . . RemoteEndpoint remote = session.getRemote(); remote.sendString(...); . . . remote.sendString(...); . . . remote.sendString(...); } This shows how duplex and asynchronous communication between the two endpoints can be achieved. This can be used to define different message exchange patterns between the client and server. The WebSocket client can send the message as: websocket.send(myTextField.value); where myTextField is a text field in the web page. Binary payload in the incoming WebSocket frame can be received if ByteBuffer is used as the first parameter of the method signature. The endpoint method signature in that case would look like: public void receiveBinaryMessage(ByteBuffer message) { . . . } From the client side, the binary data can be sent using Blob, ArrayBuffer, and ArrayBufferView. Blob is a just raw data and the actual interpretation is left to the application. ArrayBuffer and ArrayBufferView are defined in the TypedArray specification and are designed to send binary data using WebSocket. In short, ArrayBuffer is a fixed-length binary buffer with no format and no mechanism for accessing its contents. These buffers are manipulated using one of the views defined by one of the subclasses of ArrayBufferView listed below: Int8Array (signed 8-bit integer or char) Uint8Array (unsigned 8-bit integer or unsigned char) Int16Array (signed 16-bit integer or short) Uint16Array (unsigned 16-bit integer or unsigned short) Int32Array (signed 32-bit integer or int) Uint32Array (unsigned 16-bit integer or unsigned int) Float32Array (signed 32-bit float or float) Float64Array (signed 64-bit float or double) WebSocket can send binary data using ArrayBuffer with a view defined by a subclass of ArrayBufferView or a subclass of ArrayBufferView itself. The WebSocket client can send the message using Blob as: blob = new Blob([myField2.value]);websocket.send(blob); where myField2 is a text field in the web page. The WebSocket client can send the message using ArrayBuffer as: var buffer = new ArrayBuffer(10);var bytes = new Uint8Array(buffer);for (var i=0; i<bytes.length; i++) { bytes[i] = i;}websocket.send(buffer); A concrete implementation of receiving the binary message may look like: @WebSocketMessagepublic void echoBinary(ByteBuffer data, Session session) throws IOException { System.out.println("echoBinary: " + data); for (byte b : data.array()) { System.out.print(b); } session.getRemote().sendBytes(data);} This method is just printing the binary data for verification but you may actually be storing it in a database or converting to an image or something more meaningful. Be aware of TYRUS-51 if you are trying to send binary data from server to client using method return type. Here are some references for you: JSR 356: Java API for WebSocket - Specification (Early Draft) and Implementation (already integrated in GlassFish 4 promoted builds) TOTD #183 - Getting Started with WebSocket in GlassFish TOTD #184 - Logging WebSocket Frames using Chrome Developer Tools, Net-internals and Wireshark Subsequent blogs will discuss the following topics (not necessary in that order) ... Error handling Custom payloads using encoder/decoder Interface-driven WebSocket endpoint Java client API Client and Server configuration Security Subprotocols Extensions Other topics from the API

Read the article

Building a Repository Pattern against an EF 5 EDMX Model - Part 1

- by Juan

I am part of a year long plus project that is re-writing an existing application for a client. We have decided to develop the project using Visual Studio 2012 and .NET 4.5. The project will be using a number of technologies and patterns to include Entity Framework 5, WCF Services, and WPF for the client UI.This is my attempt at documenting some of the successes and failures that I will be coming across in the development of the application.In building the data access layer we have to access a database that has already been designed by a dedicated dba. The dba insists on using Stored Procedures which has made the use of EF a little more difficult. He will not allow direct table access but we did manage to get him to allow us to use Views. Since EF 5 does not have good support to do Code First with Stored Procedures, my option was to create a model (EDMX) against the existing database views. I then had to go select each entity and map the Insert/Update/Delete functions to their respective stored procedure. The next step after I had completed mapping the stored procedures to the entities in the EDMX model was to figure out how to build a generic repository that would work well with Entity Framework 5. After reading the blog posts below, I adopted much of their code with some changes to allow for the use of Ninject for dependency injection.http://www.tcscblog.com/2012/06/22/entity-framework-generic-repository/ http://www.tugberkugurlu.com/archive/generic-repository-pattern-entity-framework-asp-net-mvc-and-unit-testing-triangle IRepository.cs public interface IRepository : IDisposable where T : class { void Add(T entity); void Update(T entity, int id); T GetById(object key); IQueryable Query(Expression> predicate); IQueryable GetAll(); int SaveChanges(); int SaveChanges(bool validateEntities); } GenericRepository.cs public abstract class GenericRepository : IRepository where T : class { public abstract void Add(T entity); public abstract void Update(T entity, int id); public abstract T GetById(object key); public abstract IQueryable Query(Expression> predicate); public abstract IQueryable GetAll(); public int SaveChanges() { return SaveChanges(true); } public abstract int SaveChanges(bool validateEntities); public abstract void Dispose(); } One of the issues I ran into was trying to do an update. I kept receiving errors so I posted a question on Stack Overflow http://stackoverflow.com/questions/12585664/an-object-with-the-same-key-already-exists-in-the-objectstatemanager-the-object and came up with the following hack. If someone has a better way, please let me know. DbContextRepository.cs public class DbContextRepository : GenericRepository where T : class { protected DbContext Context; protected DbSet DbSet; public DbContextRepository(DbContext context) { if (context == null) throw new ArgumentException("context"); Context = context; DbSet = Context.Set(); } public override void Add(T entity) { if (entity == null) throw new ArgumentException("Cannot add a null entity."); DbSet.Add(entity); } public override void Update(T entity, int id) { if (entity == null) throw new ArgumentException("Cannot update a null entity."); var entry = Context.Entry(entity); if (entry.State == EntityState.Detached) { var attachedEntity = DbSet.Find(id); // Need to have access to key if (attachedEntity != null) { var attachedEntry = Context.Entry(attachedEntity); attachedEntry.CurrentValues.SetValues(entity); } else { entry.State = EntityState.Modified; // This should attach entity } } } public override T GetById(object key) { return DbSet.Find(key); } public override IQueryable Query(Expression> predicate) { return DbSet.Where(predicate); } public override IQueryable GetAll() { return Context.Set(); } public override int SaveChanges(bool validateEntities) { Context.Configuration.ValidateOnSaveEnabled = validateEntities; return Context.SaveChanges(); } #region IDisposable implementation public override void Dispose() { if (Context != null) { Context.Dispose(); GC.SuppressFinalize(this); } } #endregion IDisposable implementation } At this point I am able to start creating individual repositories that are needed and add a Unit of Work. Stay tuned for the next installment in my path to creating a Repository Pattern against EF5.

Read the article

Data Source Security Part 2

- by Steve Felts

In Part 1, I introduced the default security behavior and listed the various options available to change that behavior. One of the key topics to understand is the difference between directly using database user and password values versus mapping from WLS user and password to the associated database values. The direct use of database credentials is relatively new to WLS, based on customer feedback. Some of the trade-offs are covered in this article. Credential Mapping vs. Database Credentials Each WLS data source has a credential map that is a mechanism used to map a key, in this case a WLS user, to security credentials (user and password). By default, when a user and password are specified when getting a connection, they are treated as credentials for a WLS user, validated, and are converted to a database user and password using a credential map associated with the data source. If a matching entry is not found in the credential map for the data source, then the user and password associated with the data source definition are used. Because of this defaulting mechanism, you should be careful what permissions are granted to the default user. Alternatively, you can define an invalid default user to ensure that no one can accidentally get through (in this case, you would need to set the initial capacity for the pool to zero so that the pool is populated only by valid users). To create an entry in the credential map: 1) First create a WLS user. In the administration console, go to Security realms, select your realm (e.g., myrealm), select Users, and select New. 2) Second, create the mapping. In the administration console, go to Services, select Data sources, select your data source name, select Security, select Credentials, and select New. See http://docs.oracle.com/cd/E24329_01/apirefs.1211/e24401/taskhelp/jdbc/jdbc_datasources/ConfigureCredentialMappingForADataSource.html for more information. The advantages of using the credential mapping are that: 1) You don’t hard-code the database user/password into a program or need to prompt for it in addition to the WLS user/password and 2) It provides a layer of abstraction between WLS security and database settings such that many WLS identities can be mapped to a smaller set of DB identities, thereby only requiring middle-tier configuration updates when WLS users are added/removed. You can cut down the number of users that have access to a data source to reduce the user maintenance overhead. For example, suppose that a servlet has the one pre-defined, special WLS user/password for data source access, hard-wired in its code in a getConnection(user, password) call. Every WebLogic user can reap the specific DBMS access coded into the servlet, but none has to have general access to the data source. For instance, there may be a ‘Sales’ DBMS which needs to be protected from unauthorized eyes, but it contains some day-to-day data that everyone needs. The Sales data source is configured with restricted access and a servlet is built that hard-wires the specific data source access credentials in its connection request. It uses that connection to deliver only the generally needed day-to-day information to any caller. The servlet cannot reveal any other data, and no WebLogic user can get any other access to the data source. This is the approach that many large applications take and is the reasoning behind the default mapping behavior in WLS. The disadvantages of using the credential map are that: 1) It is difficult to manage (create, update, delete) with a large number of users; it is possible to use WLST scripts or a custom JMX client utility to manage credential map entries. 2) You can’t share a credential map between data sources so they must be duplicated. Some applications prefer not to use the credential map. Instead, the credentials passed to getConnection(user, password) should be treated as database credentials and used to authenticate with the database for the connection, avoiding going through the credential map. This is enabled by setting the “use-database-credentials” to true. See http://docs.oracle.com/cd/E24329_01/apirefs.1211/e24401/taskhelp/jdbc/jdbc_datasources/ConfigureOracleParameters.html "Configure Oracle parameters" in Oracle WebLogic Server Administration Console Help. Use Database Credentials is not currently supported for Multi Data Source configurations. When enabled, it turns off credential mapping on Generic and Active GridLink data sources for the following attributes: 1. identity-based-connection-pooling-enabled (this interaction is available by patch in 10.3.6.0). 2. oracle-proxy-session (this interaction is first available in 10.3.6.0). 3. set client identifier (this interaction is available by patch in 10.3.6.0). Note that in the data source schema, the set client identifier feature is poorly named “credential-mapping-enabled”. The documentation and the console refer to it as Set Client Identifier. To review the behavior of credential mapping and using database credentials: - If using the credential map, there needs to be a mapping for each WLS user to database user for those users that will have access to the database; otherwise the default user for the data source will be used. If you always specify a user/password when getting a connection, you only need credential map entries for those specific users. - If using database credentials without specifying a user/password, the default user and password in the data source descriptor are always used. If you specify a user/password when getting a connection, that user will be used for the credentials. WLS users are not involved at all in the data source connection process.

Read the article

Using XA Transactions in Coherence-based Applications

- by jpurdy

While the costs of XA transactions are well known (e.g. increased data contention, higher latency, significant disk I/O for logging, availability challenges, etc.), in many cases they are the most attractive option for coordinating logical transactions across multiple resources. There are a few common approaches when integrating Coherence into applications via the use of an application server's transaction manager: Use of Coherence as a read-only cache, applying transactions to the underlying database (or any system of record) instead of the cache. Use of TransactionMap interface via the included resource adapter. Use of the new ACID transaction framework, introduced in Coherence 3.6. Each of these may have significant drawbacks for certain workloads. Using Coherence as a read-only cache is the simplest option. In this approach, the application is responsible for managing both the database and the cache (either within the business logic or via application server hooks). This approach also tends to provide limited benefit for many workloads, particularly those workloads that either have queries (given the complexity of maintaining a fully cached data set in Coherence) or are not read-heavy (where the cost of managing the cache may outweigh the benefits of reading from it). All updates are made synchronously to the database, leaving it as both a source of latency as well as a potential bottleneck. This approach also prevents addressing "hot data" problems (when certain objects are updated by many concurrent transactions) since most database servers offer no facilities for explicitly controlling concurrent updates. Finally, this option tends to be a better fit for key-based access (rather than filter-based access such as queries) since this makes it easier to aggressively invalidate cache entries without worrying about when they will be reloaded. The advantage of this approach is that it allows strong data consistency as long as optimistic concurrency control is used to ensure that database updates are applied correctly regardless of whether the cache contains stale (or even dirty) data. Another benefit of this approach is that it avoids the limitations of Coherence's write-through caching implementation. TransactionMap is generally used when Coherence acts as system of record. TransactionMap is not generally compatible with write-through caching, so it will usually be either used to manage a standalone cache or when the cache is backed by a database via write-behind caching. TransactionMap has some restrictions that may limit its utility, the most significant being: The lock-based concurrency model is relatively inefficient and may introduce significant latency and contention. As an example, in a typical configuration, a transaction that updates 20 cache entries will require roughly 40ms just for lock management (assuming all locks are granted immediately, and excluding validation and writing which will require a similar amount of time). This may be partially mitigated by denormalizing (e.g. combining a parent object and its set of child objects into a single cache entry), at the cost of increasing false contention (e.g. transactions will conflict even when updating different child objects). If the client (application server JVM) fails during the commit phase, locks will be released immediately, and the transaction may be partially committed. In practice, this is usually not as bad as it may sound since the commit phase is usually very short (all locks having been previously acquired). Note that this vulnerability does not exist when a single NamedCache is used and all updates are confined to a single partition (generally implying the use of partition affinity). The unconventional TransactionMap API is cumbersome but manageable. Only a few methods are transactional, primarily get(), put() and remove(). The ACID transactions framework (accessed via the Connection class) provides atomicity guarantees by implementing the NamedCache interface, maintaining its own cache data and transaction logs inside a set of private partitioned caches. This feature may be used as either a local transactional resource or as logging XA resource. However, a lack of database integration precludes the use of this functionality for most applications. A side effect of this is that this feature has not seen significant adoption, meaning that any use of this is subject to the usual headaches associated with being an early adopter (greater chance of bugs and greater risk of hitting an unoptimized code path). As a result, for the moment, we generally recommend against using this feature. In summary, it is possible to use Coherence in XA-oriented applications, and several customers are doing this successfully, but it is not a core usage model for the product, so care should be taken before committing to this path. For most applications, the most robust solution is normally to use Coherence as a read-only cache of the underlying data resources, even if this prevents taking advantage of certain product features.

Read the article

Exiting a reboot loop

- by user12617035

If you're in a situation where the system is panic'ing during boot, you can use # boot net -s to regain control of your system. In my case, I'd added some diagnostic code to a (PCI) driver (that is used to boot the root filesystem). There was a bug in the driver, and each time during boot, the bug occurred, and so caused the system to panic: ... 000000000180b950 genunix:vfs_mountroot+60 (800, 200, 0, 185d400, 1883000, 18aec00) %l0-3: 0000000000001770 0000000000000640 0000000001814000 00000000000008fc %l4-7: 0000000001833c00 00000000018b1000 0000000000000600 0000000000000200 000000000180ba10 genunix:main+98 (18141a0, 1013800, 18362c0, 18ab800, 180e000, 1814000) %l0-3: 0000000070002000 0000000000000001 000000000180c000 000000000180e000 %l4-7: 0000000000000001 0000000001074800 0000000000000060 0000000000000000 skipping system dump - no dump device configured rebooting... If you're logged in via the console, you can send a BREAK sequence in order to gain control of the firmware's (OBP's) prompt. Enter Ctrl-Shift-[ in order to get the TELNET prompt. Once telnet has control, enter this: telnet> send brk You'll be presented with OBP's prompt: ok You then enter the following in order to boot into single-user mode via the network: ok boot net -s Note that booting from the network under Solaris will implicitly cause the system to be INSTALLED with whatever software had last been configured to be installed. However, we are using boot net -s as a "handle" with which to get at the Solaris prompt. Once at that prompt, we can perform actions as root that will let us back out our buggy driver (ok... MY buggy driver :-)) ...and replace it with the original, non-buggy driver. Entering the boot command caused the following output, as well as left us at the Solaris prompt (in single-user-mode): Sun Blade 1500, No Keyboard Copyright 1998-2004 Sun Microsystems, Inc. All rights reserved. OpenBoot 4.16.4, 1024 MB memory installed, Serial #53463393. Ethernet address 0:3:ba:2f:c9:61, Host ID: 832fc961. Rebooting with command: boot net -s Boot device: /pci@1f,700000/network@2 File and args: -s 1000 Mbps FDX Link up Timeout waiting for ARP/RARP packet Timeout waiting for ARP/RARP packet 4000 1000 Mbps FDX Link up Requesting Internet address for 0:3:ba:2f:c9:61 SunOS Release 5.10 Version Generic_118833-17 64-bit Copyright 1983-2005 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms. Booting to milestone "milestone/single-user:default". Configuring devices. Using RPC Bootparams for network configuration information. Attempting to configure interface bge0... Configured interface bge0 Requesting System Maintenance Mode SINGLE USER MODE # Our goal is to now move to the directory containing the buggy driver and replace it with the original driver (that we had saved away before ever loading our buggy driver! :-) However, since we booted from the network, the root filesystem ("/") is NOT mounted on one of our local disks. It is mounted on an NFS filesystem exported by our install server. To verify this, enter the following command: # mount | head -1 / on my-server:/export/install/media/s10u2/solarisdvd.s10s_u2dvd/latest/Solaris_10/Tools/Boot remote/read/write/setuid/devices/dev=4ac0001 on Wed Dec 31 16:00:00 1969 As a result, we have to create a temporary mount point and then mount the local disk onto that mount point: # mkdir /tmp/mnt # mount /dev/dsk/c0t0d0s0 /tmp/mnt Note that your system will not necessarily have had its root filesystem on "c0t0d0s0". This is something that you should also have recorded before you ever loaded your.. er... "my" buggy driver! :-) One can find the local disk mounted under the root filesystem by entering: # df -k / Filesystem kbytes used avail capacity Mounted on /dev/dsk/c0t0d0s0 76703839 4035535 71901266 6% / To continue with our example, we can now move to the directory of buggy-driver in order to replace it with the original driver. Note that /tmp/mnt is prefixed to the path of where we'd "normally" find the driver: # cd /tmp/mnt/platform/sun4u/kernel/drv/sparcv9 # ls -l pci\* -rw-r--r-- 1 root root 288504 Dec 6 15:38 pcisch -rw-r--r-- 1 root root 288504 Dec 6 15:38 pcisch.aar -rwxr-xr-x 1 root sys 211616 Jun 8 2006 pcisch.orig # cp -p pcisch.orig pcisch We can now synchronize any in-memory filesystem data structures with those on disk... and then reboot. The system will then boot correctly... as expected: # sync;sync # reboot syncing file systems... done Sun Blade 1500, No Keyboard Copyright 1998-2004 Sun Microsystems, Inc. All rights reserved. OpenBoot 4.16.4, 1024 MB memory installed, Serial #xxxxxxxx. Ethernet address 0:3:ba:2f:c9:61, Host ID: yyyyyyyy. Rebooting with command: boot Boot device: /pci@1e,600000/ide@d/disk@0,0:a File and args: SunOS Release 5.10 Version Generic_118833-17 64-bit Copyright 1983-2005 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms. Hostname: my-host NIS domain name is my-campus.Central.Sun.COM my-host console login: ...so that's how it's done! Of course, the easier way is to never write a buggy-driver... but.. then.. we all "have an eraser on the end of each of our pencils"... don't we ? :-) "...thank you... and good night..."

Search Results

Search found 15209 results on 609 pages for 'configuration'.

Page 560/609 | < Previous Page | 556 557 558 559 560 561 562 563 564 565 566 567 | Next Page >

- by juanlarios

- by Anand Akela

- by Grant Fritchey

- by Scott Severance

- by Ajarn Mark Caldwell

- by David Swanger

- by Charles Lamb

- by Jeff

- by Sudip Datta

- by christopher.jones

- by Kevin Smith

- by Arkevius

- by Richard Bingham

- by jgottula

- by ByronNevins

- by random

- by arungupta

- by arungupta

- by Juan

- by Steve Felts

- by jpurdy

- by user12617035

< Previous Page | 556 557 558 559 560 561 562 563 564 565 566 567 | Next Page >