Search Results

Search found 30311 results on 1213 pages for 'dont ask ubun'.

Page 561/1213 | < Previous Page | 557 558 559 560 561 562 563 564 565 566 567 568  | Next Page >

  • 12.04 usb install "boot error"

    - by kindahero
    I downloaded 12.04 64bit, I checked with md5. Seems okay. made bootable usb with usb creater. Now if try to boot up from live usb. I just get "boot error". Nothing else. nothing else. googled around. nothing comes out. UPDATE: some additional info. The usb manufacture is sony. it is fat32 partitioned. Most importantly I could install 12.04 on other systems by same usb. Yes, I definitely setup my Bios boot order to look for USB disk first.

    Read the article

  • Are Windows partitions gone?

    - by Gigili
    I had Windows 7 on my laptop (factory setting), because of some performance issues, I decided to use recovery options to restore it to its factory condition but I don't know what has happened or what I have done that the whole operating system was gone after playing around with recovery options from the boot menu. I couldn't find Windows, so I installed Ubuntu 11.04 on my laptop. Last time I had Ubuntu on it, it was not really compatible with laptop's configuration and I had a bit of problems trying to do normal tasks I used to do on Windows. Now I want to make sure that Windows and its drivers are gone so that I can try to install a newer version of Ubuntu or Windows. I tried the command sudo fdisk -l And the result shown was: myaccount@myaccount-VPCS116FG:~$ sudo fdisk -l [sudo] password for myaccount: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00025b5f Device Boot Start End Blocks Id System /dev/sda1 * 1 38409 308515840 83 Linux /dev/sda2 38409 38914 4052993 5 Extended /dev/sda5 38409 38914 4052992 82 Linux swap / Solaris Disk /dev/dm-0: 4150 MB, 4150263808 bytes 255 heads, 63 sectors/track, 504 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xa668cfe8 Disk /dev/dm-0 doesn't contain a valid partition table Is it gone? If not, what command should I try to have access to Windows partitions? Thank you.

    Read the article

  • Compiz Cube bindings don't seem to work

    - by Giancarlo Palmiotti
    I have been trying to get the 3D Cube to work however, despite setting a combination for various keys from S1 (VAIO/VAIOFW) to F7 to no avail. What is "Primary" and I am not going to use the "Rotate Cube" as I have a touchpad and I cannot use the Keyboard functions if I am correct? I've tried several other similar questions while asking this but they do not seem to work. Ubuntu-12.04.1 LTS Sincerely: Giancarlo Palmiotti

    Read the article

  • I get an "serious errors while checking the disk drives for /boot" error while booting

    - by Vaios Argiropoulos
    I have just set up my new system by creating three partitions on a whole hard disk (/boot,/home,swap and /(root)) .I saw this article and now i am getting those errors and the system provide me with some options (I to ignore, S to skip mounting or M for manual recovery). I am forced to choose skip mounting because i don't know what manual recovery is. Despite the error i get i think that the system boots ok because i can use the system but this error is very annoying.

    Read the article

  • mouse and mousepad not working properly

    - by snake
    Ubuntu 12.04 LTS Samsung Q35 The mouse pad has stopped working, only the buttons work. The external mouse is also behaving very oddly, the mouse pointer works, but the button is not working properly, it has to be pressed many times or held down to select anything, and when anything that I select behaves as though the mouse is being clicked all the screen, settings will keep changing, the page will scroll, sliders will move up and down, tabs will toggle etc, so everything is unusable with the mouse, cannot even use the browser as it keeps scrolling the page up and down. I have tested the mouse on another computer, and it works fine. Please bear in mind that I am also a complete Linux novice, I installed Ubuntu on an old laptop for my kids, that is the limit of my experience.

    Read the article

  • 12.04 Install on a HP dv9000 screen problem

    - by Tim Kounadis
    Installed 12.04 on a HP dv9000 laptop. First tried to install with a Windows partition; then tried to install and move files from windows but not have a dual boot; then tried to install and have 12.04 have the system all to itself. The install was done off a burned CD... All went well. On reboot - it takes a while to come up the user ID and password challenge. After providing input screen renders and then turns black... First time Ubuntu user/installer - not technical :-)... Thanks for any help... I'll keepon digging in parallel.

    Read the article

  • After startup, display reverts to one desktop duplicated on both screens

    - by Skilldrick
    I have a Samsung R530 laptop. I'm actually running Linux Mint, which is based on Ubuntu (which is why I thought it would be OK to post this here). I'm now getting exactly the same problem on Ubuntu 10.10. I've got it setup with a secondary LCD monitor, and I've changed the display settings so the laptop screen and monitor are at optimal resolution, with the desktop shared between them. After startup though (typically around 10-30 seconds) the display reverts to 1024 x 768 on both screens, and the display is duplicated (i.e. both screens show the same thing). I think this is something to do with my video card, as I had the same problem when I was running Arch Linux. Any ideas? Edit: 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 09) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 09) 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03) 00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) 04:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller It seems it's Intel, not Nvidia. I have a current work around, which is to have a launcher to a script containing xrandr --output LVDS1 --mode 1366x768 --output HDMI1 --mode 1280x1024 --left-of LVDS1 on my desktop, and to run it after the displays revert, but it's not ideal.

    Read the article

  • How to find manually installed packages?

    - by queueoverflow
    I installed a plain Ubuntu 10.10 on my computer and installed some software via apt-get. Last week I managed to break everything and just started from scratch, and I need to reinstall my software. Is there some way to create a list with all the packages that I have installed manually? So that it would give me a list like „texlive, ...“ and not „texlive, texlive-dep1, textlive-dep2, ...“ and all the standard packages removed? If I could somehow figure out which programs out of the regular install I have removed, that would be awesome too!

    Read the article

  • Ubuntu won't load properly all of a sudden

    - by Peter Raeves
    This has been the second time this has happened, but when I booted this morning my hardware wasn't detected anymore. I see both screens pop up as normal, choose Ubuntu 14.04 in the grub list and from that point onwards none of the following hardware seems to be used: VGA, DVI-D, USB, Audio jacks. This has happened before, but at that time, I still had one screen left, so I could navigate through the (non-USB) keyboard and how weird this may sound, but from the moment I opened Windows in vmware, all of my hardware started working again. This was a few weeks ago, but the same seems to have happened again. This time I can't use that little hack though, since now Ubuntu stops using both screens. My hardware is all detected, Ubuntu just doesn't want to use it somehow. Did anybody else encounter this and how did they solve this?

    Read the article

  • Where can I get fresh new Wine DLLs?

    - by SuperScript
    I was acting careless today and I accidentally deleted one of the .dlls in my Ubuntu Wine installation, ~/.wine/drive_c/windows/system32/ole32.dll to be exact, and need a new fresh copy of only this one .dll. I know that reinstalling will fix it, but I have installed quite a few programs and do not want to have to do such a drastic thing just to fix this one problem. So, I'm wondering if there is somewhere that I can download this original .dll as it came with my original Wine installation. I have found the SourceForge repository, but it only has .h and .c files and I do not know how to build them into a .dll. Can anyone give me a link to download, or instructions to build my missing .dlls?

    Read the article

  • I`ve got some problems with new Acer Aspire S3

    - by xcariba
    I just got a new Acer Aspire S3 Laptop, and I've installed Ubuntu on it. Here is some problems: 1. Bluetooth (AR3012) can't find any devices. rfkill shows that everything is fine, but I still can't connect to any device. (Maybe it was turned off in stock windows?) 2. Can't change screen brightness (I've tried Timex's solution with new 3.2-rc kernel and some grub options, touchpad works fine,but I still can`t use Fn+Right/Left) 3. 720p video in all players(VLC, mplayer and totem) works wrong. I found some similar problems on intel video chips with vblank sync or something like that. Video plays as it should, but i always see a line which appears on action scenes (looks like some parts of a screen updates faster) Maybe there are some solutions from similar laptops that I can find? PS I've tried ubuntu 11.04 with old kernel and linux mint 12-rc with 3.2-rc2 kernel.

    Read the article

  • What is the reason for high power consumption in 12.04?

    - by tom
    I haven't seen this exact question posted or any related answers, so I'm re-posting. Here is the problem: After upgrading to Ubuntu 12.04 Precise Pangolin, my t420s laptop idles above 20 watts (right now with only Chrome running, I'm using 25.4 W) I had a similar problem with Ubuntu 11.10, but after much tweaking the power consumption came down < 10 W on idle. The primary culprit to the 11.10 problem was supposedly fixed by default in 12.04. So my question is, what is happening now? Computer: Lenovo Thinkpad t420s, with Intel i5-2520M @2.5 Ghz - 2x 4gb ram - disk 0 HITACHI 320 Gb - disk 1 SATA SSD 128 Gb

    Read the article

  • Solutions for cheaply replacing poorly-supported onboard ATI card with discreet graphics on desktop machine?

    - by echo-flow
    I have put Ubuntu on my mum's desktop computer. Unfortunately, the open source radeon driver does not work well with the onboard ATI graphics, and ATI's proprietary driver no longer supports the hardware at all. In order to use the ATI proprietary driver with this hardware, it is necessary to use an older version of Xorg, which is now only available in versions of Ubuntu older than 8.10. Unfortunately, the open source radeon driver seems to be causing X to lock up intermittently when my mum uses Audacity. I'm willing to accept that some hardware is not well-supported on Ubuntu, and so, because this is a desktop computer with a couple of free PCI slots, I think a better solution might simply be to plug in a new graphics card that might have better driver support, and to disable the onboard ATI card in the BIOS. The requirements for this card are that it be inexpensive and have robust (preferably open source) driver support in Ubuntu 10.04. Heavy-duty graphics processing power is not a requirement. A second-hand card on Ebay would also be fine. Can anyone make some recommendations?

    Read the article

  • Uninstall libgl? Program using libgl instead of Nvidia's OpenGL libraries

    - by Tek
    I'm running Ubuntu 12.10 64-bit. I'm trying to get valve's new Linux Steam client running, but having a bit of trouble getting it to detect the right libraries or at least I think that's the issue. I installed the latest 310.19 Nvidia proprietary drivers from geforce.com. Here's the screenshot: I tried uninstalling xserver-xorg-video-nouveau thinking this was the problem but I'm still getting the same error. Any ideas what I can do for Steam to detect the right Nvidia OpenGL libraries?

    Read the article

  • No sound on laptop speakers on an Acer Aspire 6920

    - by snewix
    Computer: Acer Aspire 6920 Card: HDA Intel Chip: Realtek ALC889 My problem is that the laptop build-in speakers don't play any sound. When i plug in my headphones the sound works normally, the same goes with external speakers. Those work normally like the headphones. The profile in the Sound settings is Analog two-way Stereo. I am using Ubuntu 12.04. Might trere be any problem with my sound drivers or something similar? Any form of help appreciated.

    Read the article

  • hd0 out of disk error results to low graphics mode

    - by msPeachy
    Yesterday, I have reinstalled Ubuntu due to a error: hd0 out of disk on boot. Everything went fine, I've installed apps, perform updates and upgraded the kernel. I've even restarted it a few times just to check if I would encounter boot issues and was glad that everything was working perfectly, then powered it down. The next morning when I boot, I got this error: hd0 out of disk error. Press any key to continue... again! After pressing a key, it took 10 minutes for the Ubuntu logo to appear with it's 5 dots. After another 5 minutes, Ubuntu started checking the disk and displayed a message that / has errors, I pressed F to fix the errors. After which Ubuntu tells me that /tmp is not yet ready for mounting so I pressed S to skip mounting it, then Ubuntu restarted. On boot I saw the error: hd0 out of disk error. Press any key to continue... again. This time it took only a minute for the Ubuntu logo to appear and after another minute a dialog box appeared with the following message: The system is running in low-graphics mode. Your screen, graphics card, and input settings could not be detected correctly. You will have to configure these yourself. What would you like to do? Run in low-graphics mode for just one session Reconfigure graphics Troubleshoot the error Exit to console login Whichever option I choose I ended up with a console prompt: grub-editenv: error: cannot read the file /boot/grub/grubenv. _ I can't do anything on this console, whatever I type nothing happens. I've rebooted several times and I get same error every time. I don't quite understand what is wrong with Ubuntu or with my installation. I've encountered this hd0 out of disk error several times already and always ended up reinstalling. I'd really really appreciate it if you guys can help me fix this. Thank you and good day.

    Read the article

  • Xubuntu: Screen idle-dims after lock+new login although not idling

    - by unhammer
    I set my screen to dim after 2 minutes idling on battery in XFCE power settings. If I lock and click new login, and log in as another user, the screen will dim after 2 minutes even though that second user is active. Is there some setting or workaround for this? It feels like a bug, but I have no idea what program or combination of programs would be responsible … (I don't know if this affects Unity users or not.)

    Read the article

  • Are my other partitions safe from harm from an alpha/beta release?

    - by Marcappuccino
    I am quite intrested in testing the latest alpha-3 of Ubuntu, however, performance in VirtualBox is slow and somewhat buggy (I know! It's an Alpha) - guest additions wern't installing, bad mouse intergration, etc. I would now like to test this release on my hard drive. But my main system (12.04) is also on this very same hard drive. Is this safe? Can the alpha touch my main partition? Are there any other risks?

    Read the article

  • SSD becomes hot, disk failure warning

    - by Aegluin
    I have a two weeks old SSD (Kingston SSDnow 64GB). Yesterday, the computer shutdown twice and after rebooting I was bombarded with disk failure warnings. I usually take such warnings serious (and backed up), but skeptical. After cooling down, the laptop boots again and the only red Smart value was the temperature (Ubuntu did not show the temperature of failure, but the at that time 29°). After refreshing the Smart status and doing a "self test", everything is green. Before contacting Kingston support, I would like to know whether it could be due to a software issue: Is it possible that it is false alarm, and how can I check? I installed Ubuntu 12.04 32bit and took care of alignment. I supposed Ubuntu set up with optimal settings for SSDs, how can I check that there was no mistake? The current temperature is around 40-56°. Is such a temperature abnormal for SSDs? Output of sudo smartctl --all /dev/sda: http://pastebin.ubuntu.com/1175940/

    Read the article

  • How do I partition my Hard drive to install Kubuntu?

    - by Xdflames
    I am a complete newbie to partitioning and I would like some guidance here. Can anyone explain what exactly I should be doing here? I am installing Kubuntu 12.04 on a currently Windows 7 laptop. My current Partitions say this: /dev/sda /dev/sda1 ntfs 104 MB 35 MB /dev/sda2 ntfs 319965 MB 87164 MB Basically, what I want is some guidance on what exactly to do here. All I want is a partition for my OS (Which will be Kubuntu 12.04) and a partition for all of my data. I also want to restart fresh with my hard drive, with only what I mentioned on here. I am installing Kubuntu from a flash drive (I set it up as a bootable device with Universal-USB-Installer-1.9.0.9), as I do not have any blank CDs/DVDs to burn to. What should I name my partitions? What should I set the type as? What size do they need to be? Edit: My hard drive is 320GB. Just looked it up in my BIOS. This computer will mainly be used for internet browsing and overall just messing around with the Linux OS.

    Read the article

  • vlc 1.1.9 not working properly

    - by jaggib
    I have installed vlc 1.1.9 on wubi installed Ubuntu 11.04 using Ubuntu Software Center. Now when i tried playing videos in vlc (any format) full screen mode doesnt show controls and usually doesnt gets me out to window mode. it sometimes crashes to login screen. I tried the video output to 'X11 output mode' and 'XVideo output (XCB)' but the above problem persists and also bring another problem. full screen mode doesnt responds always when it does, it shows the video over the desktop instead of inside the player. the only way to get ubuntu to function normally is to restart the system. I tried with not using the 'Embed video in interface' but still the same problem. vlc runs perfectly well in windows. How can i make vlc function properly on my system or i need to install another player? My system config is: Graphics: VIA/S3G UniChrome Pro IGP Processor: AMD Sempron(tm) Processor 2800+ RAM: 1.5GB Motherboard Name: MS-7181 (MSI)

    Read the article

  • Connection timed out when connecting to a website (ubuntu only)

    - by S.C.
    I've been struggling with these problem for months. It happens randomly and it happens on Ubuntu only (12.04). It's about my hosted company website. Some facts: I can ping it I can traceroute it I can dig it I can make a nslookup But whenever I try to open it in Chrome it won't open. I also tried using polipo but got same connection time out issue. I'm connected through a LAN network and I'm experiencing no problem with any other website. Is there a more accurate debugging technique I'm missing other than pinging/tracerouting, etc.?

    Read the article

  • Ubuntu server is dropping SSH connections, then not allowing me to log back on

    - by wilhil
    I have an ESX box which I have loaded with two Ubuntu Server machines. During setup, I chose no additional packages to install as I just wanted a lightweight machine for testing. The first thing I did was change the root password via sudo passwd After ESX got on my nerves through lag, I decided to install OpenSSH via apt-get install openssh-server. It did it's business, and I then opened putty and could connect in to both machines fine. The first time it connected, it asked me to add the ssh key as obviously it did not know it. Anyway, the second server is working flawlessly, but, the first seems to be giving me trouble. I was in the middle of typing a sentence when it kicked me off for no reason and when I tried to reconnect, putty gave me a warning that the ssh key had changed and it is potentially dangerous. I attempted to log in anyway and it did not work, just the standard access denied message. Using the second machine, I SSHed in to the first machine and it worked straight away, I then killed the SSH sessions (and possibly SSH server), I then reconnected via putty and I again received the security warning message, but, it allowed me to log on fine. ... I thought "glitch" and nothing more of it, but, it just happened again! I really do not understand this and was hoping someone here can help?

    Read the article

  • Will the MacBook Pro Early 2011 work better with Ubuntu than the Air Late 2010?

    - by AllanCaeg
    I got this late 2010 11" MacBook Air. I'm having issues with NVIDIA graphics, especially with GNOME Shell. I'm thinking about selling this to switch to the new MacBook Pro, particularly the entry level 13" (see specs here), because of the Intel HD Graphics 3000. I assume that it will be more FOSS-friendly. I just want to point out that there are non-negotiable reasons why I'm keeping an Apple hardware at the moment, so let's keep this on topic. Will the MacBook Pro Early 2011 work better with Ubuntu than the Air Late 2010? Any other factors than the graphics hardware? Should we expect better NVIDIA graphics anytime soon?

    Read the article

  • wireless not showing up in network manager applet.

    - by Vidur Vishnudutt
    there is only the wired connection option available when the menu drops down. i have installed a belkin wireless g card for my desktop. it has been used before on this version of ubuntu 10.10, but after upgrading it shows only wired networks. enable networking and enable notifications have both been ticked. still only wired networks coming. im using ubuntu 10.10 maverick meerkat on my desktop comp and im an absolute begginer at ubuntu. can some one please help me re enable wireless on my comp?

    Read the article

< Previous Page | 557 558 559 560 561 562 563 564 565 566 567 568  | Next Page >