Search Results

Search found 18761 results on 751 pages for 'lot'.

Page 561/751 | < Previous Page | 557 558 559 560 561 562 563 564 565 566 567 568  | Next Page >

• Diagnosing RAM issues

  - by TaylorND

  I have an old Acer Aspire T180 desktop. The specs are as follows: AMD Athlon 64 3800+ 2.4GHz 1GB DDR2 SDRAM 160GB DVD-Writer (DVD±R/±RW) Gigabit Ethernet 17" Active Matrix TFT Color LCD Windows Vista Home Basic Mini-tower AST180-UA381B According to the information in the computer's documentation the computer comes with 1 GB of RAM. It has two DDR2 SDRAM sticks. I used to have Windows Vista installed. Then I removed it and install Windows 7, and now I have since removed Windows 7 and installed Windows XP. According to Windows XP with both RAM sticks in the computer has 768 MB. Isn't this supposed to be 1 GB of RAM or 1024 MB of RAM? Is the amount of RAM installed only partly used by the Operating System? Is there's something I'm missing? If I remove either one of the RAM sticks I'm left with 448 MB of RAM. These numbers don't seem to add up. If each of the RAM sticks contains at least 448 MB of RAM shouldn't they (both being in) provide 896 MB of RAM. Even then, isn't that less than a GB of RAM? I'm not too experienced in hardware so I thought this would be the best place to ask. As a follow up question, is the RAM I have enough to run/multitask with Windows XP efficiently? I plan to do a lot of computing with the system (although not gaming), should I invest in more RAM?

  Read the article

• Plug-in device to front USB computer *sometimes* restarts

  - by Mark A. Nicolosi

  I've got a strange problem that very occasionally (maybe once a month) when I plug-in something to the front USB on my computer, the computer suddently restarts. This also happens when I touch the front USB ports sometimes. This has been going on for a few years and a lot of the components in my PC have changed. I thought it was my home wiring, but I moved last year and it still happened. I thought maybe it was the motherboard, but that was upgraded 9 months ago and it still happens. I thought it was my case, but I changed that recently and it still happens. I thought maybe it was my PSU, but I upgraded that yesterday and it still happens. I'm pretty sure this is an electro-static thing, but I thought that modern computers have protection against this sort of thing. Maybe I should move my case off the floor (carpet) and stop wearing songs all the time. Edit: Just to clarify this is a computer that I built. The components have been upgraded throughout the years and it's not much the same computer anymore. This doesn't happen very often, but it is annoying, because I don't know what the cause is. Anyone have any ideas?

  Read the article

• MySQL Memory Limit Windows Server 2003

  - by Matt

  I am running MySQL 5.0.51a on Windows Server 2003 Standard Edition on an HP DL580 G4 with 3GB installed. One of my database tables has grown to 5.3 GB with an index file of 2.5 GB, which I believe is causing MySQL to be slow due to having to constantly load and unload the index file when updates are made to the table. The server itself seems to be performing OK because MySQL is only using about 500MB of memory (there are other apps running on the system, but MySQL uses the most memory). The table is fairly active with new records getting adding all during day but no deletes, ever. The MySQL server has up to 600 connections allowed, but only small number (10 or 20) would actually be writing to this table. I increased the memory limits in MySQL but since the max connections is so high I don't think I can give each connection 1GB without risking a problem. Is there some tuning that would let just certain connections get a lot of memory? So I have started to look for alternatives to avert the crisis I know is coming soon. Some of the options I have: Upgrade to Server 2003 Enterprise to install 64GB of memory. Question: would 32 bit MySQL be able to access more than 2GB? Would that be 2GB per thread? That would still be smaller than the index table size so it might not solve the problem completely, but it would be better than now. Upgrade to Server 200x 64 bit and MySQL 64 bit. Switch to a *nix 64 bit server. If anybody has suggestions for things to do in the meantime, opinions on which way to go, or other things that I have overlooked I would appreciate the help. Thanks

  Read the article

• InstallShield or Windows installer corrupted

  - by Bobby S

  Just recently I've been unable to install any software on my Windows 7 machine. Anything that uses InstallShield or the Windows installer will just hang or give a weird error. I noticed there will be many duplicate isbew64.exe processes (like 25) that launch and then just sit there or else a lot of msiexec.exe *32 processes, depending on what I'm trying to install. One piece of software specifically is the Logitech Harmony software. It gives me an *is_string_not_defined* error, saying c:\program files (x86)\:\ the filename, directory name, or volume label syntax is incorrect. The other thing I was trying to install was Battlefield: Bad Company 2, and that just hangs as well, and then just leaves all the Windows installer processes running in the background after I quit the install process. Very odd. I've checked well and googled these issues, it doesn't appear to be any sort of malware issue. I feel like it's related to some kind of corrupted installer application. I've rebooted, deleted the InstallShield folder in program files/common files as some places online suggested but to no avail. I have no idea what to do, any ideas?

  Read the article

• apache chokes after 300 connections

  - by john titus

  We have an apache webserver in front of Tomcat hosted on EC2, instance type is extra large with 34GB memory. Our application deals with lot of external webservices and we have a very lousy external webservice which takes almost 300 seconds to respond to requests during peak hours. During peak hours the server chokes at just about 300 httpd processes. ps -ef | grep httpd | wc -l =300 I have googled and found numerous suggestions but nothing seems to work.. following are some configuration i have done which are directly taken from online resources. I have increased the limits of max connection and max clients in both apache and tomcat. here are the configuration details: //apache <IfModule prefork.c> StartServers 100 MinSpareServers 10 MaxSpareServers 10 ServerLimit 50000 MaxClients 50000 MaxRequestsPerChild 2000 </IfModule> //tomcat <Connector port="8080" protocol="org.apache.coyote.http11.Http11NioProtocol" connectionTimeout="600000" redirectPort="8443" enableLookups="false" maxThreads="1500" compressableMimeType="text/html,text/xml,text/plain,text/css,application/x-javascript,text/vnd.wap.wml,text/vnd.wap.wmlscript,application/xhtml+xml,application/xml-dtd,application/xslt+xml" compression="on"/> //Sysctl.conf net.ipv4.tcp_tw_reuse=1 net.ipv4.tcp_tw_recycle=1 fs.file-max = 5049800 vm.min_free_kbytes = 204800 vm.page-cluster = 20 vm.swappiness = 90 net.ipv4.tcp_rfc1337=1 net.ipv4.tcp_max_orphans = 65536 net.ipv4.ip_local_port_range = 5000 65000 net.core.somaxconn = 1024 I have been trying numerous suggestions but in vain.. how to fix this? I'm sure m2xlarge server should serve more requests than 300, probably i might be going wrong with my configuration.. The server chokes only during peak hours and when there are 300 concurrent requests waiting for the [300 second delayed] webservice to respond. Please help..

  Read the article

• Embedded Windows XP

  - by Kyle

  My company acquired a brake press for bending large structural steel plates. We received it second hand and it came with an embedded copy of windows XP. Now for the part that's driving me nuts: plug and play has been turned off, also accessibility options has been disabled. What does this mean for me? Keyboards will not work! Nothing that plugs into a USB port will work and it does not have a CD ROM drive. I have tried to turn on plug and play using the on screen keyboard but it is not there since accessibility options is turned off. I would just get an updated copy of the the embedded OS but they come from Sweden and are extremely expensive. I assume there has got to be a way to get a USB devices to work. We need to get a wifi adapter on it so I can use team viewer and remotely configure it for our needs. Things to keep in mind: There is no keyboard so everything has to be done with the mouse There is no PS2 port for a keyboard just a mouse. Odd. I am 5 states away from this location and have been working with a tech who is physically installing the machine. System 32 seems to be missing A LOT of files, the tech told me there is only 8 folders in there and no other files (I don't even understand how Windows is running like this). If anyone has ANY ideas I would appreciate it, I am unsure where to go from here.

  Read the article

• Push, parse & import "selected" data, text, info blobs from Webpages/ Emails as Event/ Appointment to standard Calendar directly or as .ics file?

  - by Alex S

  Any tool, plugin, extension, script/ code to push "selected" data, text, information blobs from Web pages, Emails etc, then parsed and imported to structured Event, Appointment (e.g. .ics) on a standard Calendar like Outlook, Google, iCal? If not, what and how could I use some scripting, coding or existing tools, extensions to add on top and do this. I come across a lot of unstructured information on Webpages, Emails, FB events etc. where I just want to add that information to my Calendar. Instead of entering all the information by hand all the time, there should be an easy enough way to have the information get parsed, organized and imported to a Calendar... Either directly to a calendar from source or Translated to a standard format such as .ICS that can be imported & saved easily. Would love to see some suggestions for this incorporating one or more of the following: on Windows with Chrome & Outlook on iPhone/ iPad to its Calendar PS: I'll come back and see if I can add more information to this question and to answer it as well. I have not found a solution yet.

  Read the article

• Outlook 2010 PST not indexing

  - by kellyllek

  I've had this problem for months: Outlook is unable to search recent items in the inbox. I was running Outlook 2010 Beta. I've just moved to the Trial version, hoping to solve the issue. I have tons of PST files but one central one I'm mainly concerned with. As of now it seems none of it is indexing. I've been through all the sites and made all the changes; rebuilt the index, changed the name of the PST files, run scanpst, stopped and started the search services, made sure the Windows features under programs and features has the indexing option checked, etc... Status now says 'zero items left to index', and 150,000 have been indexed. I think I have a lot more files than that, and also nothing is showing up on any search. I'm not sure what else to do? Side question. I'm going to be moving out of Outlook. However I have 10Gigs+ of PST files over the years. I want to merge them and make them search-able in the easiest way possible. Any idea on how to do that? Could I even move over to Thunderbird right now and be able to index and search my PST files? Also, Google Desktop won't index Outlook 2010 email either...

  Read the article

• Transfer of ownership of Windows 7

  - by ziggy

  I am thinking of purchasing a copy of Windows 7 via either ebay or GumTree. I am unsure as to how the product key works. A close friend of mine is warning me against buying it from ebay as he is suggesting that once it has been used, the operating system registers itself on microsoft servers using the serial number of the motherboard of the system where it has been installed. This means once installed on one machine you wont be able to install it on another machine. Now i am struggling to believe that an operating system can only be installed on one machine. Can someone please explain exactly how this works. I can see a lot of copies being sold on Ebay which are used. I used the 'Ask a question' option and the majority of the users are saying that i should be able to use it. If someone buys Windows 7 from the shop, installs it on his PC but then decides that he wants to sell it can he not sell it? Will the person buying it not be able to use it? Does the person selling it have to somehow unregister it first? What do i need to look out for if buying it from Ebay? Thanks

  Read the article

• MySQL Tables Missing/Corrupt After Recreation

  - by Synetech inc.

  Hi, Yesterday I dumped my MySQL databases to an SQL file and renamed the ibdata1 file. I then recreated it and imported the SQL file and moved the new ibdata1 file to my MySQL data directory, deleting the old one. I’ve done it before without issue, however this time something is not right. When I examine the (personal, not MySQL config) databases, they are all there, but they are empty… sort of. The data directory still has the .ibd files with the correct content in them and I can view the table list in the databases, but not the tables themselves. (I have file-per-table enabled, and am using InnoDB as default for everything.) For example with the urls database and its urls table, I can successfully open mysql.exe or phpMyAdmin and use urls;. I can even show tables; to see the expected table, but then when I try to describe urls; or select * from urls;, it complains that the table does not exist (even though it just listed it). (The MySQL Administrator lists the databases, but does not even list the tables, it indicates that the dbs are completely empty.) The problem now is that I have already deleted the SQL file (and cannot recover it even after scouring my hard-drive). So I am trying to figure out a way to repair these databases/tables. I can’t use the table repair function since it complains that the table does not exist, and I can’t dump them because again, it complains that the tables don’t exist. Like I’ve said, the data itself is still present in the .ibd files and the table names are present. I just need a way to get MySQL to recognize that the tables exist in the databases (I can find the column names of the tables in question in the ibdata1 file using a hex-editor). Any idea how I can repair this type of corruption? I don’t mind rolling up my sleeves, digging in, and taking a bunch of steps to fix it. Thanks a lot.

  Read the article

• How to prevent an SSD from disappearing from BIOS

  - by Midimatt

  I've only recently upgraded my old machine to a new one with a brand new 60gb SSD as my boot drive and a 1TB main drive. Paranoid about completely breaking my SSD, I read up on a lot of issues that I needed to watch out for, including making sure AHCI was turned on and trim enabled. PC has been working fine for a few weeks now, until today. My wife was watching some TV on the machine when it started to act strange and eventually blue screened. She rebooted and the boot mgr was missing. When I got home from work I checked the BIOS and the drive had disappeared. I panicked and looked up some possible fixes, and I discovered a large amount of people having problems with the drive firmware, especially on OCZ Vertex and Agility drives, and my drive is an Agility 3 drive. The problems included blue screens followed by missing drives, and a solution was to reset the CMOS and try again. This worked, and now everything seems to be working fine. My question is, is there any way to prevent this from happening? Am I missing a setting for my SSD? All of the posts I found were from early to mid-2011 nothing for the end of 2011 to 2012. So I am wondering if I've missed anything. EDIT: Checked my drives firmware and it is 2.15, which has had issues reported by users.

  Read the article

• Buying an old laser printer -- what will need to be replaced?

  - by marienbad

  Hi all -- as you can see I'm new. I do IT and wiring for a small local shop but I never deal with printers. I do a LOT of printing, and I'd like to stop spending as much money on it. On my local CL, there is an HP 8100DN (duplex network) printer for a very good price (and the toner is a quarter-cent per page). It has printed 200,000 pages and I don't yet know anything else about it. The model was released in 1999. So my questions: What are the parts that tend to need service on laser printers? On ebay, I see fusers, rollers, DC power boards, and motors. What would you expect to replace soon at 200,000 pages? Are there any good "tests" to find out if certain parts are near failure? Do you have anything to say about the HP 8100 specifically? The bottom line for me is that if there's any chance of repairs costing more than $100, it's not worth it for me.

  Read the article

• Hardware testing tool/suite

  - by Aviator

  Hi All, I just bought a new core i5 system (assembled) and started installing Windows 7. It was failing for many times and at some point got installed. After that, frequent crashes related to MEMORY. So checked the RAM using memtest86+ and found many errors.I got it replaced with the vendor and now if i install ANY OS, at some point in installation it either freezes completely with no response for hours, or restarts automatically. I tried installing Windows 7, Windows Vista and Ubuntu 9.10. I tested the new RAM again and found no problems in about 2 passes using memtest86+. I even updated the BIOS using bootable USB and even the problem persists. I am really not sure which hardware is causing trouble. I dont have any OS inside it, so i have to check using bootable CDs DVDs and USB only. Please advice on how to proceed. Are there any suites/ separate tools for checking integrity of each hardware parts and troubleshoot it? I wanted to confirm which part is problematic before going for replacement. Thanks a lot! This is the config: Core i5, MSI P55-GD65, GSKill 2x2GB, Seagate 500GB 7200rpm, CM Extreme 600W PSU, Saphhire Radeon 5770 1GB, LG DVD Writer

  Read the article

• How do I prevent my computer from freezing when it starts to swap?

  - by cdauth

  I work as a Java programmer, so I often have to run several programs at the same time that consume a lot of memory. When my memory is full and Linux starts swapping, my computer almost completely freezes. I can see that it is heavily writing on the hard-disk and everything reacts really slowly, often not at all. Moving the mouse in X sometimes doesn’t work at all, sometimes it has a delay of several seconds, clicking usually has a delay of several minutes. Sometimes it is possible to change to the TTY (with a long delay), there I can usually type without delay, but when I try to log in, it takes several minutes after typing in the user name until the password prompt appears, and usually an error message appears that tells me that the login timed out. So the only possibility is usually to restart the computer. I noticed that other intensive writing to the hard disk also significantly slows down my computer. Sometimes, I used rsync to limit the bandwidth when I copied files around on my own computer, as else the system would be almost unusable. How can this be? At the moment it seems more useful to me to completely turn off swapping. That might crash some processes, which is unfortunate, but the alternative at the moment is to crash all processes by turning off my computer. I am using Gentoo Linux with kernel 3.6.2-gentoo, I have a 10 GB swap partition on a HDD.

  Read the article

• PHP potential issues with compiling 5.3.8 extensions against RHEL 6 / CentOS 6 PHP 5.3.3 package

  - by user101203

  I'm working on getting a Red Hat 6 LAMP server going and while the PHP that comes with it has many extensions we use, it doesn't have all of them. To solve this, I was thinking about either compiling the PHP extensions which come in the ext folder of the downloadable source code of PHP 5.3.3 from php.net same as #1, but using the extensions from the latest PHP version (currently 5.3.8). Do #1 but manually decide which updates to backport from the latest version of the PHP extensions into the older version and then compile the backported result A drawback to #1 is that security and bug fixes come out which we wouldn't be able to take advantage of. A drawback to #3 is that it might be a lot of work Does anyone know what the drawbacks to #2 are? I don't want to go down that route if it might result in some unexpected negative outcomes. Also, are there any other drawbacks to the other options or a better way to go altogether? I want to use the PHP 5.3.3 which comes with the Linux distro because I don't want us to get to a place again where we are forced to upgrade to a new version of PHP to stay on top of security updates like from PHP 5.2.x to 5.3.x and there be backwards incompatible changes (this is the situation we're in now with PHP 5.2.x no longer being supported).

  Read the article

• Disaster Recovery Standby Server

  - by user64300

  Hi, I work for a small business with 25 users and 2 servers. 1 server is the DC running Windows Server 2003/Exchange 2003. We want a reliable disaster recovery strategy for this server without having to spend a lot of money. We take regular backups but I have been advised that only an identical server will allow them to be restored easily. I'm trying to come up with a solution that means we don't have to buy two servers at twice the cost everytime we upgrade. I'm toying with the idea of upgrading our DC more frequently (say every 3 years) and then using the old server as the recovery server (temporarily - until we can source a replacement server). However, I won't know whether the backups will restore on the old server until I try it! We're planning to upgrade to Server 2008R2 in the near future so I'm hoping the backup tools will give me some success in restoring to different hardware (or perhaps I can use hyper-v if not). So what I am wondering is whether it is a idea to use old hardware as a disaster recovery strategy (providing we regular test it obviously!).

  Read the article

• Windows 7 explorer crashing trying to read external hard disk

  - by Mario De Schaepmeester

  I have a 1TB Western Digital hard drive which is almost full and last time I tried to plug it into my laptop, I got a Windows dialog saying "this hard drive needs to be formatted". I did not panic because I have experienced things like this before and I know it's often solved by simply re-inserting the drive. Now however, whenever I plug it in and try to browse it in explorer by going to "computer", the explorer process crashes after a while. I simply close explorer since it takes ages trying to read the disk and nothing happens. After searching on the internet, the best thing to do would be a chkdsk. I tried it via properties in explorer (which also took a good 5 minutes to open up), locks up as well, after waiting a couple of minutes it says there's no access to the disk so a chkdsk is not possible... I want to make clear that I always use safe removal before pulling out the USB cable. Last time however, safe removal just would not work and when trying to shut down Windows, the logoff screen just would not disappear (I've waited at least 10 minutes or so) and I powered off the PC by force. This may be the cause of the problems but the disk was still recognised immediately after that. I really don't want to format this thing because it contains C: clones of 3 computers and a lot of other stuff that I don't want to re-copy. What would be the best course of action? Update I got chkdsk working via the command line. I used the /F and /R options. I already got a bunch of lines saying "file record segment X is unreadable" or whatever it is in English, my OS is Dutch. It looks bad... Will chdsk repair these errors?

  Read the article

• How to track things that SHOULD happen, but might not have

  - by Kamiel Wanrooij

  I am running into a couple of issues with some applications we've deployed and maintain. I have the feeling we have approached this with some anti-patterns up to now, but I would like to see how to make this more flexible and stable. In one situation, we have a server at a client which pushes data to us to parse every night (yes, Windows Task Scheduler). This is highly unstable however, so once every month this doesn't happen because of reasons out of our control. This heavily impacts our business since we run with stale data in that situation. In another scenario we have a lot of background job processes that should be running. We already keep them up using bluepill ( http://www.github.com/arya/bluepill ) but obviously restarts happen, both automatically and manually, and people forget things or systems mess up. What I would like to track is events that should occur or should be available. Like the existence of a process, the execution of a program, or the creation/age of a file, and track it when they don't happen or exist. We develop most things in Ruby on Rails, use NewRelic, Bluepill and Munin, and run on Ubuntu. I've been toying around with counting ps aux | grep processname | wc -l in Munin scripts, or capturing the age of a file and raising alerts over 24-26 hours, stuff like that. Is there better tooling to track things that should happen, and raise alerts if they don't? P.S. I know some things are suboptimal, like manually having to define bluepill for applications and then forgetting to do so. The same goes for the push based approach of the first application, a dedicated daemon that manages that on the client side that we control and can track its connection to us might be a much better solution.

  Read the article

• vSphere education - What are the downsides of configuring virtual machines with *too* much RAM?

  - by ewwhite

  VMware memory management seems to be a tricky balancing act. With cluster RAM, Resource Pools, VMware's management techniques (TPS, ballooning, host swapping), in-guest RAM utilization, swapping, reservations, shares and limits, there are a lot of variables. I'm in a situation where clients are using dedicated vSphere cluster resources. However, they are configuring the virtual machines as though they were on physical hardware. In turn, this means a standard VM build may have 4 vCPUs and 16GB or more of RAM. I come from the school of starting small (1 vCPU, minimal RAM), checking real-world use and adjusting up as necessary. Some examples from a "problem" cluster. Resource pool summary - Looks almost 4:1 overcommitted. Note the high amount of ballooned RAM. Resource allocation - The Worst Case Allocation column shows that these VMs would have access to less than 50% of their configured RAM under constrained conditions. The real-time memory utilization graph of the top VM in the listing above. 4 vCPU and 64GB RAM allocated. It averages under 9GB use. Summary of the same VM What are the downsides of overcommitting and overconfiguring resources (specifically RAM) in vSphere environments? Assuming that the VMs can run in less RAM, is it fair to say that there's overhead to configuring virtual machines with more RAM than they need? What is the counter-argument to: "if a VM has 16GB of RAM allocated, but only uses 4GB, what's the problem??"? E.g. do customers need to be educated? What specific metric should be used to meter RAM usage. Tracking the peaks of "Active" versus time?

  Read the article

• Developing high-performance and scalable zend framework website

  - by Daniel

  We are going to develop an ads website like http://www.gumtree.com/ (it will not be like this one but just to give you an ideea) and we are having some issues regarding performance and scalability. We are planning on using Zend Framework for this project but this is all that I'm sure off at this point. I don't think a classic approch like Zend Framework (PHP) + MySQL + Memcache + jQuery (and I would throw Doctrine 2 in there to) will fix result in a high-performance application. I was thinking on making this a RESTful application (with Zend Framework) + NGINX (or maybe MongoDB) + Memcache (or eAccelerator -- I understand this will create problems with scalability on multiple servers) + jQuery, a CDN for static content, a server for images and a scalable server for the requests and the rest. My questions are: - What do you think about my approch? - What solutions would you recommand in terms of servers approch (MySQL, NGINX, MongoDB or pgsql) for a scalable application expected to have a lot of traffic using PHP?...I would be interested in your approch. Note: I'm a Zend Framework developer and don't have to much experience with the servers part (to determin what would be best solution for my scalable application)

  Read the article

• SNMP query - operation not permitted

  - by jperovic

  I am working on API that reads a lot of data via SNMP (routes, interfaces, QoS policies, etc...). Lately, I have experienced a random error stating: Operation not permitted Now, I use SNMP4J as core library and cannot really pinpoint the source of error. Some Stackoverflow questions have suggested OS being unable to open sufficient number of file handles but increasing that parameter did not help much. The strange thing is that error occurs only when iptables is up and running. Could it be that firewall is blocking some traffic? I have tried writing JUnit test that mimicked application's logic but no errors were fired... Any help would be appreciated! Thanks! IPTABLES *nat :PREROUTING ACCEPT [2:96] :POSTROUTING ACCEPT [68:4218] :OUTPUT ACCEPT [68:4218] # route redirect za SNMP Trap i syslog -A PREROUTING -i eth0 -p udp -m udp --dport 514 -j REDIRECT --to-ports 33514 -A PREROUTING -i eth0 -p udp -m udp --dport 162 -j REDIRECT --to-ports 33162 COMMIT *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT -A INPUT -p icmp -j ACCEPT -A INPUT -i lo -j ACCEPT ..... # SNMP -A INPUT -p udp -m state --state NEW -m udp --dport 161 -j ACCEPT # SNMP trap -A INPUT -p udp -m state --state NEW -m udp --dport 162 -j ACCEPT -A INPUT -p udp -m state --state NEW -m udp --dport 33162 -j ACCEPT ..... -A INPUT -j REJECT --reject-with icmp-host-prohibited -A FORWARD -j REJECT --reject-with icmp-host-prohibited COMMIT

  Read the article

• 2 routers at home- how to connect with VNC?

  - by Charles Leviton

  I have two routers at home. First router is upstairs and is connected to the cable modem. 2nd router is downstairs and acts as "signal booster" for the 1st router. Devices connected to the upstairs router have IP addresses of the form 192.168.1.n Devices connected to the upstairs router have IP addresses of the form 192.168.2.n. I blindly followed instructions from a website to do this set up, just glad it works! Upstairs I have a PC running Win 7 64 bit. Its assigned IP is 192.168.1.7. I have a VNC viewer running on this. Downstairs I have a 2nd PC running Vista 32 Home edition bit that is connected to the 2nd router and has IP Address 192.168.2.114. VNC server is running on this. It's listening on 5900. There is no firewall. When I try to connect to this downstairs PC from upstairs it fails with message "Failed to connect to server". I cannot ping to this either. If I try to connect to this downstairs PC using VNC Viewer from another computer that's connected to the same downstairs router then it works like a charm. So what's the work around if the viewer is on a different "network"? I don't have any problems doing remote desktop connection from the downstairs PC to the upstairs PC even if they are connected to different routers. Router information- Upstairs- ASUS RTN13U, downstairs- DD-WRT v24 RC-5 Thanks! P.S. I posted this on the Ultra VNC forum as well but that doesn't seem to have a lot of activity, so taking the liberty to multipost.

  Read the article

• Server 2012 - transparent SMB failover without shared discs, possible?

  - by TomTom

  here is the scenario - there is a small set (200gb around) of data that I HAVE to keep available. Those are basically shared VHD images that serve as master images for a lot of our VM's - they then run in differential discs off those. The whole set is "mostly read only". In more detail: A file that IS there and IS used will NEVER change. I may delete files (when absolutely not in use) and add new files, but a file that is there once gets read protection set and that it is until it is retired. Obviously, I need as much uptime as possible. SO FAR we run that by having this directory local on every Hyper-V server. Now I think moving this into our storage fabric. Due to the "it HAS to be there" I pretty much want a share nothing architecture. DFS would be perfect for this - a file never changes, so replication would work nicely. Folders could be replicated to a number of servers, all would reference them from there. Now, that hyper-V supports SMB that could be a good idea to isolate these on a number of servers - we try to move into a scenario where the storage is more centralized. Server 2012 supports always on shares, but it seems that this only works with a clustered disc behind. Is there any way around this for read only file stores? All documentation points to stuff like a shared JBOD - but that would leave me open for file system corruption. I really plan to go quite separately here, vertically - 2 servers, both with SSD only for this, both with their own 2000W separate USV, both with enough bandwidth to handle everything thrown at them (note to everyone tinking this is 10G - this would be SLOW and EXPENSIVE compared to a nice Infiniband backbone). The real crux is that this is an edge case obviously - as the files are read only once in use.

  Read the article

• cheap gigabit switch for small business

  - by neoice

  my friend's business is currently borrowing my Adtran 1224R and is very happy with it. it's configured with a few VLANs to segment customers, internal traffic and public wifi. port 1 is a "trunk" port to the router, a chunky Linux box with iptables+NAT. they push a lot of traffic over the LAN (data backups) and really need gigabit. besides, I'd like my Adtran back :P my goal is to find a cheap(ish) switch that can function as a drop-in replacement. it looks like VLAN trunking is actually part of the 802.1q spec, so anything with VLAN support should cover the current trunk-to-router setup. it's nice to have both a web interface and SSH, but I can configure it either way if needed. things like the Netgear GS724T have caught my eye, but it seems like none of the hardware in the $300-500 range have really solid reviews. I'm concerned that "cheaper" hardware might not work for a network full of power users. does anyone have a recommendation for the Netgear GS724T or a switch that will meet my needs?

  Read the article

• Sed: Deleting all content matching a pattern

  - by Svish

  I have some plist files on mac os x that I would like to shrink. They have a lot of <dict> with <key> and values. One of these keys is a thumbnail which has a <data> value with base64 encoded binary (I think). I would like to remove this key and value. I was thinking this could maybe be done by sed, but I don't really know how to use it and it seems like sed only works on a line-by-line basis? Either way I was hoping someone could help me out. In the file I would like to delete everything that matches the following pattern or something close to that: <key>Thumbnail<\/key>[^<]*<\/data> In the file it looks like this: // Other keys and values <key>Thumbnail</key> <data> TU0AKgAAOEi25Pqx3/ip2fak0vOdzPCVxu2RweuPv+mLu+mIt+aGtuaEtOSB ... dCBBcHBsZSBDb21wdXRlciwgSW5jLiwgMjAwNQAAAAA= </data> // Other keys and values Anyone know how I could do this? Also, if there are any better tools that I can use in the terminal to do this, I would like to know about that as well :)

  Read the article

< Previous Page | 557 558 559 560 561 562 563 564 565 566 567 568  | Next Page >