Search Results

Search found 45843 results on 1834 pages for 'network access'.

Page 562/1834 | < Previous Page | 558 559 560 561 562 563 564 565 566 567 568 569  | Next Page >

• How do I restore a database on a remote SQL server 2005 from a local backup?

  - by MatsT

  I have been given access to (parts of) a remote SQL Server 2005 with SQL Server authentication in order to be able to make changes to a database without involving other people who is not working on the project. The database have been created on my local machine. Is there any way to restore the remote database from a backup file on my local computer? I do not currently have access to the filesystem on the remote server. EDIT: To clarify, the access I have is that i can log in to the server via the SQL Server Management Studio. I have one connection to my local database server and one connection to the remote server. What I basically want to do is copy the database from one connection to the other.

  Read the article

• Serving static files fails - nginx

  - by Sergei

  Hi, I've been looking and trying around all night, but without success. I configured nginx to serve my static files and proxy all the other traffic: server { listen 80; server_name mydomain.com; access_log /home/boudewijn/www/bbt/brouwers/logs/access.log; error_log /home/boudewijn/www/bbt/brouwers/logs/error.log; location / { proxy_pass http://127.0.0.1:8080; include /etc/nginx/proxy.conf; } location /media/ { root /home/boudewijn/www/bbt/brouwers/; } } The proxy passing is no problem, but when I go to mydomain.com/media/ or try to access any testfile over there, it's without success. I paid attention to the difference between root and alias, my media folder exists, I paid attention to the trailing slashes, but still I get a 404 when trying to access my static media files. Any help?

  Read the article

• How to enabled Printer Sharing on Web Server 2008?

  - by FarrEver

  I am installing Web Server 2008 for my home network. I have 2 USB printers that I am connecting to this machine and want to share these printers so that my other machines can print to these 2 USB printers. (I previously had Win Server 2003 on this machine and was able to share both printers fine.) File and Printer sharing Inbound Role for my Private network is enabled, when I go into Network and Sharing Center and try to turn ON Printer Sharing, it never sticks. It always stays on OFF. I go to my installed printers and try to Share them and get the following error message: Printer Settings could not be saved. Remote connections to the Print Spooler are blocked by a policy set on your machine. I have not been able to find a policy on my machine that is preventing this. I have searched a lot over the past few days and most of the results say what I have done should work and there are also a number of search results that say Printer Sharing on Web Server 2008 is not allowed and you have to hack it. Has anyone installed Web Server 2008 and shared printers before? If so, what are the detailed steps you took to get this to work?

  Read the article

• VLAN trunking between Juniper EX -> Cisco Catalyst -> and Cisco Router

  - by Hugo Garcia

  I have the following scenario: EX2200 Switch whit ge-0/0/6 set as an access port on VLAN 80 ge-0/0/0 set as a trunk port connected to a catalyst switch and various vlans allowed to pass includin vlan 80 On the Catalyst Switch. port #3 set up as a trunk port that receives traffic from the EX switch. port 46 is set up also as a trunk port that connects to a cisco router. Port #48 is where the host used to be connected host - EX2200 - Catalyst - Router the problem is that this EX2200 is a new addition to the network and the host connected previosly to the catalyst switch. traffic is not getting from the host to the router, but the router can send ARP request to the host. following is the relevant configuration: Catalyst Switch: interface GigabitEthernet1/46 switchport trunk encapsulation dot1q switchport trunk allowed vlan 80,82,83,93,289 switchport mode trunk mtu 1532 media-type rj45 speed 1000 duplex full arp timeout 300 ! interface GigabitEthernet1/48 switchport access vlan 80 switchport mode access mtu 1532 media-type rj45 speed 100 duplex full arp timeout 300 no cdp enable ! EX2200 Switch:

  Read the article

• how to disable isight auto adjustments ?

  - by George Profenza

  The built-in isight cam on my macbook machine keeps re-adjusting the lighting (and focus I think). I need to manually set those, but I found nothing of any use in System Preferences or System Profiler. Any way to access the settings ? Any magic terminal commands that allows access to the camera ? Anyone has a driver that allows for any camera access ? 'mac - it just works'...sure, if you want to use it like a kid. the second you actually want to do something with you mac other than the basic things, you can do on ANY regular machine anyway, your 'rights' are done with, as apple seems to only encourage dumb clients. I'm not saying saying this applies to all mac users, but the 'typical/average' one in my view is only going to use it for media(music,video) and web(facebook,blogging, all that) and maybe podcasting,webcasting,etc....ok this is turning into a rant, so I will finish here.

  Read the article

• Make case-sensitive SMB share case-insensitive

  - by fungs

  I am running a legacy XP app that I would like to move on a network share. It is very simple and works in theory but the server providing the share is based on Linux (cannot configure) and the software does not work correctly because it is programmed case-insensitively, it seems. After some research, network shares behave like the filesystem they use underneath. This is normal. Unfortunately I cannot fix the software myself. Is there any way to turn the case-sensitivity into case-insensitivity for a Windows network drive on the client side? I fould two approaches: First, something like icasefile (http://wnd.katei.fi/icasefile/) that wraps around the program and intercepts the file I/O. This is for UNIX only. Secondly, a proxy virtual file system (e. g. something using Dokan). Unfortunately I couldn't find any suitable fs, the only possibility would be to put a case-insensitive filesystem on an image file and put this on the share using for example lmdisk (http://www.ltr-data.se/opencode.html/#ImDisk). Do you have any better ideas?

  Read the article

• SQL 2000 and group names

  - by Nasa

  I have a SQL 2000 server which has databases, under user section of the database object, I have some NT 4.0 groups. These groups were migrated over to Active Directory some time ago using ADMT with SID history. The original source domain groups have since been deleted. The access shown is olddomain\groupname. I don't know why, if they were ntfs permissions they would update automatically to target\groupname. The users in the AD domain still have access to the database as they are a member of the migrated group (Target\groupname). I was wondering 1) Why does the old group (source\groupname) show up as it doesn't exist anymore. But access is still granted to the target group? 2) Is there any easy way to update the group name from source\groupname to target\groupname? Thanks for any help.

  Read the article

• Security issues of running PHP scripts as the owner of the PHP file with suexec

  - by thomasrutter

  I'm using suexec to ensure that PHP scripts (and other CGI/FastCGI apps) are run as the account holder associated with the relevant virtual host. This allows for securing each users' scripts from reading/writing by other users. However, it occurs to me that this opens up a different security hole. Previously, the web server ran as an unprivileged user, with read-only access to user's files (unless the user changed the file permissions for some reason). Now, the web server can also write to user's files. So while I've prevented different users taking advantage of each other's scripts, I've made it so that in the event that some application has a remote code injection vulnerability, it now has not only read access but also write access to all that user's scripts and website. How can I deal with this? One idea I've had is to create a second user account for each user account in the system, so that each user has their own user account, and all their scripts are run under another user account. But that seems cumbersome.

  Read the article

• Running PHP scripts as the owner of the PHP file: security issues

  - by thomasrutter

  I'm using suexec to ensure that PHP scripts (and other CGI/FastCGI apps) are run as the account holder associated with the relevant virtual host. This allows for securing each users' scripts from reading/writing by other users. However, it occurs to me that this opens up a different security hole. Previously, the web server ran as an unprivileged user, with read-only access to user's files (unless the user changed the file permissions for some reason). Now, the web user can also write to user's files. So while I've prevented different users taking advantage of each other's scripts, I've made it so that in the event that some application has a remote code injection vulnerability, it now has not only read access but also write access to all that user's scripts and website. How can I deal with this? One idea I've had is to create a second user account for each user account in the system, so that each user has their own user account, and all their scripts are run under another user account. But that seems cumbersome.

  Read the article

• Pasting extended ACL contents into telnet session to Cisco Router SIM

  - by Kyle Brandt

  I have a telnet session to a dynamips router sim. When I try to paste the contents of an actually working ACL retrieved from 'show run' into the access list, only part of gets pasted. The session is something like: enable conf t ip access-list extended Internet <PASTE of Rules> It stops right in the middle of a line: permit tcp any host 123.123.123.123 gt 1 ! should be gt 1023 Anyone know what is happening? The source is an extended access list.

  Read the article

• Cisco ASA 5510 Time of Day Based Policing

  - by minamhere

  I have a Cisco ASA 5510 setup at a boarding school. I determined that many (most?) of the students were downloading files, watching movies, etc, during the day and this was causing the academic side of our network to suffer. The students should not even be in their rooms during the day, so I configured the ASA to police their network segment and limit their outbound bandwidth. This resolved all of our academic issues, and everyone was happy. Except the resident students. I have been asked to change/remove the policing policy at the end of the day, to allow the residents access to the unused bandwidth at night. There's no reason to let bandwidth sit unused at night just because it would be abused during the day. Is there a way to setup Time of Day based Policies on the ASA? Ideally I'd like to be able to open up the network at night and all day during weekends. If I can't set Time based policies, is is possible to schedule the ASA to load a set of commands at a specific time? I suppose I could just setup a scheduled task on one of our servers to log in and make the changes with a simple script, but this seems like a hack, and I'm hoping there is a better or more standard way to accomplish this. Thanks. Edit: If there is a totally different solution that would accomplish a similar goal, I'd be interested in that as well. Free/Cheap would be ideal, but if a separate internet connection is my only other option, it might be worth fighting for money for hardware or software to do this better or more efficiently.

  Read the article

• ACL in linux-based samba shares

  - by Odin

  If I mount a samba share like this from a linux server using ACL in ext3... mount -t cifs //192.168.0.10/smbshare /mnt/smbshare -o user=root password=secret ...and access the share with linux/smb-user smbuser. I have given smbuser write access to all catalogs, but when I write something to the share the owner becomes root (the user that mountet the share). Is there any possibility to make smbuser the owner of the files/catalogs he creates even if the share is mountet by the root-user? This case is supposed to work on a linux terminal server so many different users access the smb share (mountet by root).

  Read the article

• VMWare converter performance

  - by bellocarico

  Hello, I have a question about my test lab. It's more to understand the concept more than apply this into production: I have an ESXi with few VMs linux/windows configured and I'd like to use VMWare converter to create backups. To speedup the process I decided to create a Windows VM on the same ESXi host where I've installed Windows 7 and VMWare Converter. The Host has a gigabit card but it's currently connected to a 100Mb FD port. Windows 7 sees a 1gb card connected. When I do the backup using VMWare converter I specify the host IP as source and destination, so I thought the copy could be faster then use my laptop across the network. Well, to cut a long sotry short: I get dreadful performance (4Mb/sec). I'm a buit confused on this because despite the fact that the host is running 100Mb communication between VMs and hosts shouldn't (correct me if I'm wrong) have any limitation instead. I did tweak windows 7 to optimise network performane but I got just a little improvement. i still need 4 hours to back up a 50Gb (thin) VM. Additionally I wanted to ask: Would jumbo frame help in this? I know that jumbo frame have to be supported end to end, and the network switch where the host is currently connected doesn't support this, but I was wondering: 1) Does ESXi host support jumbo frames at all? 2) Can I enable it somehow? 3) If I do so, I guess bulk transfert between VMs and host would improve, but would this affect the communication going through the real switch as this doesn't do jumbo? Thanks for reading

  Read the article

• Clicking or Knocking with Seagate HD

  - by Daniel A. White

  My laptop's main HD makes a clicking or knocking sound when Windows or the Bios tries to access it. I put it into a SATA dock and it sounds perfectly fine when spinning up, but after Windows tries to access it, it becomes a repetitive clicking or knocking sound. Does anyone know any tips that might help me access my data? I have most of it backed up, but I would still like to Ghost it before I send it off for repairs. I know my laptop is still under warranty.

  Read the article

• Possible to IPSec VPN Tunnel Public IP Addresses?

  - by caleban

  A customer uses an IBM SAS product over the internet. Traffic flows from the IBM hosting data center to the customer network through Juniper VPN appliances. IBM says they're not tunneling private IP addresses. IBM says they're tunneling public IP addresses. Is this possible? What does this look like in the VPN configuration and in the packets? I'd like to know what the source/destination ip/ports would look like in the encrypted tunneled IPSec Payload and in the IP packet carrying the IPSec Payload. IPSec Payload: source:1.1.1.101:1001 destination:2.2.2.101:2001 IP Packet: source:1.1.1.1:101 destination:2.2.2.1:201 Is it possible to send public IP addresses through an IPSec VPN tunnel? Is it possible for IBM to send a print job from a server on their network using the static-nat public address over a VPN to a printer at a customer network using the printer's static-nat public address? Or can a VPN not do this? Can a VPN only work with interesting traffic from and to private IP addresses?

  Read the article

• Vlans and subinterfaces

  - by Adeodatus

  I've inherited a moderate size network that I'm trying to bring some sanity to. Basically, its 8 public class Cs and a slew of private ranges all on one vlan (vlan1, of course). Most of the network is located throughout dark sites. I need to start separating some of the network. I've changed the ports from the main cisco switch (3560) to the cisco router (3825) and the other remote switches to trunking with dot1q encapsulation. I'd like to start moving a few select subnets to different vlans. To get some of the different services provided on our address space (and to separate customers) on to different vlans, do I need to create a subinterface on the router for each vlan and, if so, how do I get the switch port to work on a specific vlan? Keep in mind, these are dark sites and geting console access is difficult if not impossible at the moment. I was planning on creating a subinterface on the router for each vlan then setting the ports with services I want to move to a different vlan to allow only that vlan. Example of vlan3: 3825: interface GigabitEthernet0/1.3 description Vlan-3 encapsulation dot1Q 3 ip address 192.168.0.81 255.255.255.240 the connection between the switch and router: interface GigabitEthernet0/48 description Core-router switchport trunk encapsulation dot1q switchport mode trunk show interfaces gi0/48 switchport Name: Gi0/48 Switchport: Enabled Administrative Mode: trunk Operational Mode: trunk Administrative Trunking Encapsulation: dot1q Operational Trunking Encapsulation: dot1q Negotiation of Trunking: On Access Mode VLAN: 1 (default) Trunking Native Mode VLAN: 1 (default) Administrative Native VLAN tagging: enabled Voice VLAN: none Administrative private-vlan host-association: none Administrative private-vlan mapping: none Administrative private-vlan trunk native VLAN: none Administrative private-vlan trunk Native VLAN tagging: enabled Administrative private-vlan trunk encapsulation: dot1q Administrative private-vlan trunk normal VLANs: none Administrative private-vlan trunk private VLANs: none Operational private-vlan: none Trunking VLANs Enabled: ALL Pruning VLANs Enabled: 2-1001 Capture Mode Disabled Capture VLANs Allowed: ALL Protected: false Unknown unicast blocked: disabled Unknown multicast blocked: disabled Appliance trust: none So, if the boxen hanging off of gi0/18 on the 3560 are on an unmanaged layer2 switch and all within the 192.168.0.82-95 range and are using 192.168.0.81 as their gateway, what is left to do, especially to gi0/18, to get this working on vlan3? Are there any recommendations for a better setup without taking everything offline?

  Read the article

• Can't get Ubuntu 11.10 working on my VirtualBox running on Mac OsX 10.6.8

  - by stack-o-frankie

  I installed the Guest Additions, installed the isight-firmware-tools by using the AppleUSBVideoSupport file but I still can't get access to the iSight webcam. When I launch vlc v4l2:///dev/video0 I get the following errors: Blocked: call to unsetenv("DBUS_ACTIVATION_ADDRESS") Blocked: call to unsetenv("DBUS_ACTIVATION_BUS_TYPE") [0x92d492c] main libvlc: Running vlc with the default interface. Use 'cvlc' to use vlc without interface. Blocked: call to setlocale(6, "") Blocked: call to setlocale(6, "") (process:2922): Gtk-WARNING **: Locale not supported by C library. Using the fallback 'C' locale. (vlc:2922): Gtk-WARNING **: Unable to locate theme engine in module_path: "pixmap", (vlc:2922): Gtk-WARNING **: Unable to locate theme engine in module_path: "pixmap", (vlc:2922): Gtk-WARNING **: Unable to locate theme engine in module_path: "pixmap", (vlc:2922): Gtk-WARNING **: Unable to locate theme engine in module_path: "pixmap", [0x963287c] v4l2 demux error: VIDIOC_STREAMON failed [0x963287c] v4l2 demux error: cannot set input (Device or resource busy) [0x96430a4] v4l2 access error: VIDIOC_STREAMON failed [0x96430a4] v4l2 access error: cannot set input (Device or resource busy) [0x9371104] main input error: open of `v4l2:///dev/video0' failed: (null) Any clue?

  Read the article

• Firebox 1250e Core Failing?

  - by Noah

  We have 2 Firebox 1250e Core firewall boxes in our production environment, serving as an active and passive mode. A few months back, the active box was flashing a warning light, so our consultant removed it, and plugged it in to a test network. Everything appeared to be working fine, so he reloaded it into the production environment, and we didn't see any other issues. Fast forward to last week, and out network was constantly dropping connections over RDC, timing out, and performing as if there was a traffic issue. I turned off the production box and everything began to work fine immediately. At this point though, I'm not sure how to proceed. Should the box be completely replaced? Is there any recommended testing we could do to determine if there is a failure of some type with this device? Should we try upgrading the software on it? I know the environment isn't the issue, since the passive box (which is now the active one) is working fine. We'd like to have 2 in production though for safety failover purposes. I am not a network admin, but am hoping someone here might be able to provide some guidance.

  Read the article

• Weird behaviour with OpenVPN: can not connect to a few websites

  - by Gaby Solis

  My OpenVPN server is Ubuntu 10.04.4 LTS and openvpn version is 2.x My client is on Win 7. He can access most sites but not Youtube, Facebook, Twitter, groups.google.com, etc My server.conf is: local x.x.x.x port 1194 proto udp dev tun ca /etc/openvpn/keys/ca.crt cert /etc/openvpn/keys/server.crt key /etc/openvpn/keys/server.key dh /etc/openvpn/keys/dh1024.pem server 10.8.0.0 255.255.255.0 push "redirect-gateway def1" push "dhcp-option DNS 8.8.8.8" client-to-client keepalive 10 120 comp-lzo persist-key persist-tun status /etc/openvpn/keys/openvpn-status.log verb 4 I can access Youtube etc using SSH Tunnel + SOCKS Proxy, and the Ubuntu server can access all sites. so nothing is wrong with the Ubuntu server. With little information I can provide, I am not looking for a quck solution. How can I debug?

  Read the article

• How can I change the default location/action of 'Open Outlook Data File' in Outlook 2010?

  - by Chadddada

  I have recently deployed a Remote Desktop Host server that functions as a remote Microsoft Office 2010 work space for users. In part of the locking down of this server I have installed all programs on the D: drive and, through the use of Group Policy, hidden all the drives on the server from standard users. In addition to hiding these drives I am not allowing users to save anything locally (on the server) or open Libraries. However one of the functions of the server is to provide the Outlook client. Often users will have the .PST file stored on a network location and want to open this in Outlook. Can I change the default action or location that File Open Open Outlook Data File looks or tries to pull the file from? The default location seems to be under Users / Libraries. When click 'Open' you get a warning: This operation has been cancelled due to restrictions in effect on this computer. Clicking OK drops the user into a small menu that shows attached network drives under Computer. Can I instead have the 'Open' click drop the users in a defined network drive or just open computer and allow them to select a share? I don't want them to see the error message. A solution that looks to have been used for Office 2000/03 is: Key: HKEY_CURRENT_USER\Software\Microsoft\Office\<version>\Outlook Value name: ForceOSTPath Value type: REG_EXPAND_SZ Value: path to your storage folder I am not sure if there is a better way to do this now OR if this even works with Office 2010.

  Read the article

• Using both domain users and local users for Squid authentication?

  - by Massimo

  I'm working on a Squid proxy which needs to authenticate users against an Active Directory domain; this works fine, Samba was correctly set up and Squid authenticates users via ntlm_auth. Relevant lines in squid.conf: auth_param ntlm program /usr/bin/ntlm_auth --helper-protocol=squid-2.5-ntlmssp auth_param ntlm children 5 auth_param ntlm keep_alive on acl Authenticated proxy_auth REQUIRED http_access allow Authenticated http_access deny all Now, I need a way to allow access to users which don't have a domain account. I know I could create an "internet user" account in the domain, but this would allow access, although limited, to domain resources (file shares, etc.); I need something that will allow only Internet access. The ideal solution would be using a local account on the proxy server, either a Linux account or a Squid one; I know Squid supports this, but I'm unable to have it use both domain authentication and Squid/local authentication if domain auth is unsuccesful. Can this be done? How?

  Read the article

• Can't connect remotely to Windows Server 2008 R2

  - by JohnyD

  I have a new Dell R710 server running Windows Server 2008 R2. I one of it's 4 nic's set up and the rest are not being used. I have successfully given it an ip address, network mask, and dns servers. I can ping and resolve this machine from anywhere else in the network. However, when I try to connect to it via RDP it does several things: 1) it might just outright refuse me with the message, "This computer can't connect to the remote computer. Try connecting again." 2) it might connect me and let me chose the account I would like to log on as... but when you select an account then you receive the same message as in #1 3) it might actually allow you to connect but only for about 1 minute and then you receive the same message and it closes your session. I have configured the firewall service to allow for RDP over the domain network connection. This didn't have any noticible effect. I have now disabled the firewall for all 3 networks and have even stopped the Windows Firewall service. I am still having the same issue. I am new to Server 2008 R2 and things are very different. Please give me any advice you can on how to resolve this issue and/or any other gotchas that are sure to come my way. The 2003 - 2008 learning curve seems steep. Thanks

  Read the article

• memcached and IIS manager with windows 2008

  - by user64484

  I have memcached (c:\memcached) running on port 11211 and I have a problem configuring IIS manager I created a site in IIS manager binded to port 11211 and if I have memcached running and try and start the site it says "the process cant access the file because it is being used by another process" If I stop memcached and start the site in IIS (and enable directory browsing) I can access the directory structure http://localhost:11211 ok, if I then try and start memcached it errors with error 1053 "could not start the memcached server on local computer" I know I'm doing something fundamentally wrong here! just cannot figure out how I can use IIS and memcached together. [edit]I should add that I need other servers to be able to access memcached[/edit]

  Read the article

• Server 2012, Jumbo Frames - should I expect problems?

  - by TomTom

  Ok, this sound might stupid - but is there any negative on just enabling jumbo frames in practice? From what I understand: Any switch or ethernet adapter that sees a jumbo frame it can not handle will just drop it. TCP is not a problem as max frame size is negotiated in the setinuo phase. UCP is a theoretical problem as a server may just send a LARGE UDP packet that gets dropped on the way. Practically though, as UDP is packet based, I do not really think any software WOULD send a UDP packet larger than 1500 bytes net without app level configuration changes - at least this is how I do my programming, as it is quite hard to get a decent MTU size for that without testing yourself, so you fall back in programming to max 1500 packets. The network in question is a standard small business network - we upgraded now from a non managed 24 port switch to a 52 port switch with 4 10g ports (netgear - quite cheap) and will mov a file server to 10g for also ISCSI serving. All my equipment on the Ethernet level can handle minimum 9000 bytes and due to local firewalls I really want to get packets larger (less firewall processing), but the network is also NAT'ed to the internet. On top, different machines move around (download) large files (multi gigabyte area) quite often for processing. The question is - can I expect problems when I just enable jumbo frames? Again, this is not totally ignorance - I just don't see programs sending more than 1500 byte UDP packets (if that is a practical problem please tell me) and for TCP the MTU is negotiated anyway. if there is a problem I can move to a dedicated VLAN, but this has it's own shares of problems as basically most workstations must then be on both VLAN's.

  Read the article

• Other users on my Server?

  - by Jennifer Weinberg

  I'm buying a Server from a person (that I don't know really well) and I want to make sure that the previous owner hasn't got any access anymore. It's an Ubuntu Virtual Server and I already received the admin access (via shell). How can I find out if there are still other accounts left, who are still able to access my server (e.g. with a still existing shell account, ftp or another type of user account)? And how can I delete them if these accounts exist? Best regards, Jennifer

  Read the article

< Previous Page | 558 559 560 561 562 563 564 565 566 567 568 569  | Next Page >