Search Results

Search found 24715 results on 989 pages for 'output parameters'.

Page 562/989 | < Previous Page | 558 559 560 561 562 563 564 565 566 567 568 569  | Next Page >

  • VIM zsh, bash and colors in command line on Ubuntu

    - by Jacek Wysocki
    I have problem with VIM command line when calling system commands. e.g. !ls, all command output colors aren't parsed by VIM. My system is Ubuntu 12.04 LTS with VIM 7.3.429 from Ubuntu repositories. Is there any workaround for this problem? EDIT: My vimrc file :!echo $TERM in VIM returns : dumb EDIT2: I found a simple workaround but it's not perfect if [ "$VIM" ] && [ "$TERM" = "dumb" ] then # For gvim's monochromatic :shell PS1='\n\u@\h \w\n\$ ' unalias ls unalias grep fi (It's working on bash)

    Read the article

  • Slow dvd burning/reading speeds: how to solve

    - by wouter205
    I have a problem on which I'm struggling since i started using linux a year ago on my desktop, but still haven't found a solution for it. When reading or burning a dvd, the speeds are very slow (mostly under 1x) whilst I did selected the fastest speed in k3b. As such, it takes up to 40-50 minutes to burn one dvd! I read about enabling dma this post but it didn't help. This is the output for dmesg | grep -i dma > [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3921 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 3527 pages used for memmap [ 0.000000] DMA32 zone: 254441 pages, LIFO batch:31 [ 0.000000] Policy zone: DMA32 [ 0.120356] pnp 00:01: [dma 4] [ 0.120968] pnp 00:05: [dma 2] [ 0.121421] pnp 00:06: [dma 3] [ 0.122617] pnp 00:0b: [dma 0 disabled] [ 0.852321] ata1: SATA max UDMA/133 cmd 0xec00 ctl 0xe480 bmdma 0xe000 irq 19 [ 0.852325] ata2: SATA max UDMA/133 cmd 0xe400 ctl 0xe080 bmdma 0xe008 irq 19 [ 0.861633] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 [ 0.861636] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 [ 1.329411] ata1.00: ATA-7: Maxtor 6V250F0, VA111630, max UDMA/133 [ 1.345418] ata1.00: configured for UDMA/133 [ 1.820606] ata4.00: ATAPI: PHILIPS DVDR1660P1, P1.3, max UDMA/33 [ 1.820610] ata4.00: WARNING: ATAPI DMA disabled for reliability issues. It can be enabled [ 1.820613] ata4.00: WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node. [ 1.836681] ata4.00: configured for UDMA/33 [ 12.296600] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] reading the third and fourth last line, I assume there is indeed a problem with dma? edit: this question still is not solved. Could anyone come up with an other solution please? Thanks

    Read the article

  • Why does eth0 show an IP if I'm booting into runlevel 1?

    - by banjer
    I'm having some issues with networking on a new Linux server I'm building. The OS is SLES 11. When booting into runlevel 1, I see that eth0 is showing an IP. Physically, there is a network cable plugged into the card associated with eth1, and then there is a network cable plugged into a QLogic iSCSI card (eth4, not shown). I've been troubleshooting this for awhile, and it seems like eth0 is somehow getting assigned an IP, even though it isn't configured in Linux or even plugged into the network for that matter. Thoughts? ifconfig -a Here is the ifconfig output (Sorry, I need more rep before I can post images on SF...)

    Read the article

  • Acer Aspire One 725 - missing graphic card driver?

    - by Melon
    Recently I bought an Acer Aspire One 725 Netbook and installed Ubuntu 12.10 on it. I bought it, because it can run HD movies and has Full HD on external VGA port. However, movies from youtube have a really slow framerate. If you open three tabs in Opera (for example g-mail, youtube and askubuntu) it gets really laggy. My suspicion is that the driver for graphic card is missing. When I check the System->Details->Graphics the driver is unknown. After running lspci | grep VGA I get this output: 00:01.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Device 980a From what I see, I have a AMD C70 processor integrated with (or something similar) AMD Radeon HD 6290. Has anyone had the same problem? Do you know which drivers need to be installed for the graphics to work properly? On official Acer page there are only drivers for Win7 and Win8... Update: I have tried installing fglrx but I get the following error (either I don't have libraries or someone didn't make a clean build before release ;) /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c: In function ‘KCL_MEM_AllocLinearAddrInterval’: /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:2124:5: error: implicit declaration of function ‘do_mmap’ [-Werror=implicit-function-declaration] /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:2124:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c: In function ‘kasInitExecutionLevels’: /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:4159:5: error: ‘cpu_possible_map’ undeclared (first use in this function) /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:4159:5: note: each undeclared identifier is reported only once for each function it appears in /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:4159:5: warning: left-hand operand of comma expression has no effect [-Wunused-value] Update 2: After fixing the erros in compilation, ubuntu acts bizarre and unstable (no left icon panel, no upper panel, cannot run any programs, I only see desktop)

    Read the article

  • Is there a way I can use $PATH as defined by my bash profile?

    - by Adam Backstrom
    I spend most of my day ssh'd into servers. I have a series of aliases/functions/scripts that allow me to type p hostname from the terminal and execute GNU screen(1) on the remote side, using the following command: exec ssh hostname -t 'screen -RD'` I've only recently noticed that ssh -t does not get my custom $PATH. Here's some terminal output: adam@workstation:~:0$ sh server 'echo $PATH' /home/adam/bin:/usr/local/bin:/bin:/usr/bin:/opt/git/bin:/opt/git/libexec/git-core adam@workstation:~:0$ ssh server -t 'echo $PATH' /usr/local/bin:/bin:/usr/bin Connection to uranus.plymouth.edu closed. My biggest problem is my custom aliases only try to execute screen, since I can't guarantee an absolute path, and my $PATH is structured so the shell should find the correct one. If my $PATH settings aren't honored, my scripts don't work. Is there a way I can use $PATH as defined by my .bashrc/.bash_profile? I believe PermitUserEnvironment is disabled.

    Read the article

  • What encoding is used by javax.xml.transform.Transformer?

    - by Simon Reeves
    Please can you answer a couple of questions based on the code below (excludes the try/catch blocks), which transforms input XML and XSL files into an output XSL-FO file: File xslFile = new File("inXslFile.xsl"); File xmlFile = new File("sourceXmlFile.xml"); TransformerFactory tFactory = TransformerFactory.newInstance(); Transformer transformer = tFactory.newTransformer(new StreamSource(xslFile)); FileOutputStream fos = new FileOutputStream(new File("outFoFile.fo"); transformer.transform(new StreamSource(xmlFile), new StreamResult(fos)); inXslFile is encoded using UTF-8 - however there are no tags in file which states this. sourceXmlFile is UTF-8 encoded and there may be a metatag at start of file indicating this. am currently using Java 6 with intention of upgrading in the future. What encoding is used when reading the xslFile? What encoding is used when reading the xmlFile? What encoding will be applied to the FO outfile? How can I obtain the info (properties) for 1 - 3? Is there a method call? How can the properties in 4 be altered - using configuration and dynamically? if known - Where is there info (web site) on this that I can read - I have looked without much success.

    Read the article

  • Server Firewall preventing sending of email [migrated]

    - by Jo Fitzgerald
    The firewall on my VPS appears to be preventing my site from sending email. It was working fine until the end of last month. My hosting provider (Webfusion) has been next to useless. I am able to send email if I open INPUT ports 32768-65535, but not if these ports are closed. Why would this be? I have the following rules in my firewall: # sudo iptables -L Chain INPUT (policy DROP) target prot opt source destination VZ_INPUT all -- anywhere anywhere Chain FORWARD (policy DROP) target prot opt source destination VZ_FORWARD all -- anywhere anywhere Chain OUTPUT (policy DROP) target prot opt source destination VZ_OUTPUT all -- anywhere anywhere Chain VZ_FORWARD (1 references) target prot opt source destination Chain VZ_INPUT (1 references) target prot opt source destination ACCEPT tcp -- anywhere anywhere tcp dpt:www ACCEPT tcp -- anywhere anywhere tcp dpt:https ACCEPT tcp -- anywhere anywhere tcp dpt:smtp ACCEPT tcp -- anywhere anywhere tcp dpt:ssmtp ACCEPT tcp -- anywhere anywhere tcp dpt:pop3 ACCEPT tcp -- anywhere anywhere tcp dpt:domain ACCEPT udp -- anywhere anywhere udp dpt:domain ACCEPT tcp -- anywhere anywhere tcp dpts:32768:65535 ACCEPT udp -- anywhere anywhere udp dpts:32768:65535 ACCEPT tcp -- localhost.localdomain localhost.localdomain ACCEPT udp -- localhost.localdomain localhost.localdomain Chain VZ_OUTPUT (1 references) target prot opt source destination ACCEPT tcp -- anywhere anywhere ACCEPT udp -- anywhere anywhere The VPS is running Plesk 10.4.4 (please ask if you require further technical information to help me)

    Read the article

  • Perl - can't flush STDOUT or STDERR

    - by Jim Salter
    Perl 5.14 from stock Ubuntu Precise repos. Trying to write a simple wrapper to monitor progress on copying from one stream to another: use IO::Handle; while ($bufsize = read (SOURCE, $buffer, 1048576)) { STDERR->printflush ("Transferred $xferred of $sendsize bytes\n"); $xferred += $bufsize; print TARGET $buffer; } This does not perform as expected (writing a line each time the 1M buffer is read). I end up seeing the first line (with a blank value of $xferred), and then the 7th and 8th lines (on an 8MB transfer). Been pounding my brains out on this for hours - I've read the perldocs, I've read the classic "Suffering from Buffering" article, I've tried everything from select and $|++ to IO::Handle to binmode (STDERR, "::unix") to you name it. I've also tried flushing TARGET with each line using IO::Handle (TARGET-flush). No dice. Has anybody else ever encountered this? I don't have any ideas left. Sleeping one second "fixes" the problem, but obviously I don't want to sleep a second every time I read a buffer just so my progress will output on the screen! FWIW, the problem is exactly the same whether I'm outputting to STDERR or STDOUT.

    Read the article

  • Wireless not detected on an hp Pavilion g6 - RT5390PCIe

    - by Earl Larson
    I just bought an HP Pavilion g6 laptop and I installed Natty Narwhal alongside Windows 7. In Windows 7, my WiFi works perfect but in Ubuntu it absolutely (no matter what I do) won't detect my home WiFi network. Here is the output of "lspci": earl@ubuntu:~$ lspci 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS880 Host Bridge 00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (int gfx) 00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0) 00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1) 00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) 00:11.0 SATA controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] 00:12.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:12.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:13.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:13.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 42) 00:14.1 IDE interface: ATI Technologies Inc SB7x0/SB8x0/SB9x0 IDE Controller (rev 40) 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40) 00:14.3 ISA bridge: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller (rev 40) 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (rev 40) 00:14.5 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI2 Controller 00:16.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:16.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control 01:05.0 VGA compatible controller: ATI Technologies Inc M880G [Mobility Radeon HD 4200] 01:05.1 Audio device: ATI Technologies Inc RS880 Audio Device [Radeon HD 4200] 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05) 03:00.0 Network controller: Ralink corp. Device 5390 04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5209 (rev 01) earl@ubuntu:~$

    Read the article

  • When to use HTTP status code 404 in an API

    - by Sybiam
    I am working on a project and after arguing with people at work for about more than a hour. I decided to know what people on stack-exchange might say. We're writing an API for a system, there is a query that should return a tree of Organization or a tree of Goals. The tree of Organization is the organization in which the user is present, In other words, this tree should always exists. In the organization, a tree of goal should be always present. (that's where the argument started). In case where the tree doesn't exist, my co-worker decided that it would be right to answer response with status code 200. And then started asking me to fix my code because the application was falling apart when there is no tree. I'll try to spare flames and fury. I suggested to raise a 404 error when there is no tree. It would at least let me know that something is wrong. When using 200, I have to add special check to my response in the success callback to handle errors. I'm expecting to receive an object, but I may actually receive an empty response because nothing is found. It sounds totally fair to mark the response as a 404. And then war started and I got the message that I didn't understand HTTP status code schema. So I'm here and asking what's wrong with 404 in this case? I even got the argument "It found nothing, so it's right to return 200". I believe that it's wrong since the tree should be always present. If we found nothing and we are expecting something, it should be a 404. More info, I forgot to add the urls that are fetched. Organizations /OrgTree/Get Goals /GoalTree/GetByDate?versionDate=... /GoalTree/GetById?versionId=... My mistake, both parameters are required. If any versionDate that can be parsed to a date is provided, it will return the closes revision. If you enter something in the past, it will return the first revision. If by Id with a id that doesn't exists, I suspect it's going to return an empty response with 200. Extra Also, I believe the best answer to the problem is to create default objects when organizations are created, having no tree shouldn't be a valid case and should be seen as an undefined behavior. There is no way an account can be used without both trees. For that reasons, they should be always present. also I got linked this (one similar but I can't find it) http://viswaug.files.wordpress.com/2008/11/http-headers-status1.png

    Read the article

  • python: os.system does not execute shell comand

    - by capoluca
    I need to execute shell command in python program (I have ubuntu). More specifically I want to create graph using graphviz in python script. My code is os.system("dot -Tpng graph.dot -o graph.png") It does not work, but if I just type dot -Tpng graph.dot -o graph.png in command line then everything is fine. Do you know what the problem? Thank you! Edit: Does not work means that nothing happens, there are no errors. Output from dot -v -Tpng graph.dot -o graph.png: dot - graphviz version 2.26.3 (20100126.1600) Activated plugin library: libgvplugin_pango.so.6 Using textlayout: textlayout:cairo Activated plugin library: libgvplugin_dot_layout.so.6 Using layout: dot:dot_layout Using render: cairo:cairo Using device: png:cairo:cairo The plugin configuration file: /usr/lib/graphviz/config6 was successfully loaded. render : cairo dot fig gd map ps svg tk vml vrml xdot layout : circo dot fdp neato nop nop1 nop2 osage patchwork sfdp twopi textlayout : textlayout device : canon cmap cmapx cmapx_np dot eps fig gd gd2 gif gv imap imap_np ismap jpe jpeg jpg pdf plain plain-ext png ps ps2 svg svgz tk vml vmlz vrml wbmp x11 xdot xlib loadimage : (lib) eps gd gd2 gif jpe jpeg jpg png ps svg

    Read the article

  • Unable to create context rendering error whet run OpenGL application

    - by Rodnower
    Hello, I try to run Mesa gears example and I get following error: freeglut (./gears): Unable to create direct context rendering for window 'Gears' This may hurt performance. though the application runs successfully, but I guess that in future I will have much problems with productivity. I run Linux CentOS 5 on WMvare 7. Mesa's version is 6.5 Relevant output of lspci -v gives: 00:0f.0 VGA compatible controller: VMware SVGA II Adapter (prog-if 00 [VGA controller]) Subsystem: VMware SVGA II Adapter Flags: bus master, medium devsel, latency 64, IRQ 9 I/O ports at 10d0 [size=16] Memory at d0000000 (32-bit, non-prefetchable) [size=128M] Memory at d8000000 (32-bit, non-prefetchable) [size=8M] [virtual] Expansion ROM at 30000000 [disabled] [size=32K] Capabilities: [40] Vendor Specific Information Any one have idea? There is driver of vmvare for CentOS? Thank you for ahead.

    Read the article

  • OpenVPN - Ubunut 10.04 - Client Can't Connect to Server - Linux Route Add Command Failed

    - by nicorellius
    I suppose this could be asked on Server Fault as well, but it is specific to the client so I thought I'd start here. I have keys for a OpenVPN server already in place. I have used these keys to connect already, but using a Windows XP machine. I started by building the client.conf file so that I could run: sudo openvpn --config client.conf And it seems correct but I still can't connect and get these errors and lines of output: Mon May 31 14:34:57 2010 ERROR: Linux route add command failed: external program exited with error status: 7 Mon May 31 14:34:57 2010 /sbin/route add -net 10.8.0.1 netmask 255.255.255.255 gw 10.8.0.17 SIOCADDRT: File exists Mon May 31 14:34:57 2010 ERROR: Linux route add command failed: external program exited with error status: 7 Mon May 31 14:34:57 2010 Initialization Sequence Completed I searched the net for forums and ideas and tried some file moving and renaming but still ended up in the same place.

    Read the article

  • How do I fix my installation of ATI Catalyst Video Drivers in 12.04 LTS?

    - by Boris
    My graphic card is a Mobility Radeon HD 4200 Series. I tried these 2 answers from What is the correct way to install ATI Catalyst Video Drivers in 12.04 LTS? But unfortunately, it does not work for me: When running the amd script, I get this error message: $ sudo sh ./amd-driver-installer-12-4-x86.x86_64.run ... DKMS part of installation failed. Please refer to /usr/share/ati/fglrx-install.log for details When checking this log file, I get: Uninstalling any previously installed drivers. Creating symlink /var/lib/dkms/fglrx/8.961/source -> /usr/src/fglrx-8.961 DKMS: add completed. Kernel preparation unnecessary for this kernel. Skipping... Building module: cleaning build area.... cd /var/lib/dkms/fglrx/8.961/build; sh make.sh --nohints --uname_r=3.2.0-24-generic-pae --norootcheck......(bad exit status: 1) [Error] Kernel Module : Failed to build fglrx-8.961 with DKMS [Error] Kernel Module : Removing fglrx-8.961 from DKMS Deleting module version: 8.961 completely from the DKMS tree. Done. [Reboot] Kernel Module : update-initramfs When checking with fglrxinfo, I get: $ fglrxinfo X Error of failed request: BadRequest (invalid request code or no such operation) Major opcode of failed request: 138 (ATIFGLEXTENSION) Minor opcode of failed request: 66 () Serial number of failed request: 13 Current serial number in output stream: 13

    Read the article

  • Command line safety tricks

    - by deadprogrammer
    Command line and scripting is dangerous. Make a little typo with rm -rf and you are in a world of hurt. Confuse prod with stage in the name of the database while running an import script and you are boned (if they are on the same server, which is not good, but happens). Same for noticing too late that the server name where you sshed is not what you thought it was after funning some commands. You have to respect the Hole Hawg. I have a few little rituals before running risky commands - like doing a triple take check of the server I'm on. Here's an interesting article on rm safety. What little rituals, tools and tricks keeps you safe on the command line? And I mean objective things, like "first run ls foo*, look at the output of that and then substitute ls with rm -rf to avoid running rm -rf foo * or something like that", not "make sure you know what the command will do".

    Read the article

  • It's intellisense for SQL Server

    - by Nick Harrison
    It's intellisense for SQL Server Anyone who has ever worked with me, heard me speak, or read any of writings knows that I am a HUGE fan of Reflector.    By extension,  I am a big fan of Red - Gate   I have recently begun exploring some of their other offerings and came across this jewel. SQL Prompt is a plug in for Visual Studio and SQL Server Management Studio.    It provides several tools to make dealing with SQL a little easier for your friendly neighborhood developer. When you a query window in a database, the plugin kicks in and gathers the metadata for the database that you are in.    As you type a query, you get handy feedback like a list of tables after you type select.    You can select one of the tables, specify * and then tab to expand the select clause to include all of the columns from the selected table.    As you are building up the where clause, you are prompted by the names of columns in the selected tables. If you spend any time writing ad hoc queries or building stored procedures by hand, this can save you substantial time. If you are learning a new data model, this can greatly cut down on your frustration level. The other really cool thing here is Format SQL.   I have searched all over the place for a really good SQL formatter.    Badly formatted  SQL is so much harder to read than well formatted SQL.   Unfortunately, management studio offers no support for keeping your SQL well formatted.    There are many tools available to format your SQL.   Some work better than others.    Some don't work that well at all.   Most will give you some measure of control over how the formatted SQL looks.    SQL Prompt produces good results and is easy to configure. Sadly no tool is perfect, and what would we be without a wish list.    There are some features that I would like to see: Make it easier to paste SQL in and out of code.    Strip off string builder, etc Automate replacing hard coded values with bind variables or parameters In addition to reformatting SQL, which is a huge refactor, support for other SQL refactors would be nice.    Convert join to sub query and vice versa come to mind Wish list a side, this is a wonderful tool that easily saves me an hour or more on most weeks.

    Read the article

  • Boot Problem in Asus EEE PC 1015CX

    - by Sâmrat VikrãmAdityá
    I am a newbie to Linux world, although I have previously worked on Ubuntu 11.04 for daily use (Net Access and simple recordings using Audacity). I am not sure, at what level I stand as a newbie. I bought this Asus Eee PC two days back. The model is Asus 1015CX. See the specs here http://www.flipkart.com/asus-1015cx-blk011w-laptop-2nd-gen-atom-dual-core-1gb-320gb-linux/p/itmd8qu4quzu8srr . I created a live USB to install 12.10. The usb booted fine. When I clicked "Try Ubuntu" option, it showed me a black screen with a cursor blinking. I waited for 15 minutes and had to restart using the power button. On clicking the "Install Ubuntu" button, the install process went seamlessly. [I have a Windows7 installed on one of the partitions]. i installed it alongside previous windows installation. The system was then rebooted for the first time. It showed the GRUB menu and I selected the first option Ubuntu. After showing the splash screen for a second, it began showing various messages on a black screen and then it struck on "Stopping Save kernel state message". I had to force shut the system using power button. Sometimes it just gives a blank screen with a cursor blinking and on pressing power button, some messages stating that acpid is doing something and stopping services pops up and the system shuts down. I tried booting with "nomodeset" and other parameters as directed in solution to previous such problems on forums. Also Ctrl+Alt+F1,F2,F3,F4,F5,F6..F12 is not doing anything for me anywhere. At installation, I checked Login automatically option. On booting into recovery several options comes up. Clicking resume just gives me a blank screen with cursor blinking. on dropping to root shell and remounting filesystem as RW, I am able to supply some command that worked for others. startx -- Several messages comes up with last one stating Fatal error: No screen found sudo service lightdm start -- Gives a blank screen with a cursor blinking lspci | grep VGA -- Shows some Intel Integrated Graphic... something I don't remember I had reconfigured xserver-xorg, lightdm, reinstalled ubuntu-desktop, unity. What should I do..?? Will going back to 11.04 work..?? Or I should leave all hopes of running Ubuntu on my netbook. Please help.

    Read the article

  • Can iptables allow Squid to process a request, then redirect the response packets to another port?

    - by Dan H
    I'm trying to test a fancy traffic analyzer app, which I have running on port 8890. My current plan is to let any HTTP request come into Squid, on port 3128, and let it process the request, and then just before it sends the response back, use iptables to redirect the response packets (leaving port 3128) to port 8890. I've researched this all night, and tried many iptables commands, but I'm missing something and my hair is falling out. I thought something like this would work: iptables -t nat -A OUTPUT -p tcp --sport 3128 -j REDIRECT --to-ports 8990 This rule gets created ok, but it never redirects anything. Is this even possible? If so, what iptables incantation could do it? If not, any idea what might work on a single host, given multiple remote browser clients?

    Read the article

  • How to preserve paragraph breaks when text copy from PDF and paset ito Notepad?

    - by metal gear solid
    For example when I copy text from PDF which has paragraph breaks like this xxxxx xxxxxx xxxxxxx xxxxxx xxxxxx xxxxxxxx xxxxxx x xxxx xx xxxx xxxx xxxxxxxxxxx x xxxxxxxx x x xxxxxxxxxxxxxx xxxx xxx xxxx xxxxxx xxxxx xxxxxx xxxxxxx xxxxxx xxxxxx xxxxxxxx xxxxxx x xxxx xx xxxx xxxx xxxxxxxxxxx x xxxxxxxx x x xxxxxxxxxxxxxx xxxx xxx xxxx xxxxxx but when i copy text from PDF and paste into Notepad, Word 2007 etc. output comes without paragraph breaks. Lke this xxxxx xxxxxx xxxxxxx xxxxxx xxxxxx xxxxxxxx xxxxxx x xxxx xx xxxx xxxx xxxxxxxxxxx x xxxxxxxx x x xxxxxxxxxxxxxx xxxx xxx xxxx xxxxxx xxxxx xxxxxx xxxxxxx xxxxxx xxxxxx xxxxxxxx xxxxxx x xxxx xx xxxx xxxx xxxxxxxxxxx x xxxxxxxx x x xxxxxxxxxxxxxx xxxx xxx xxxx xxxxxx How to preserve paragraph breaks when text copy from PDF and paset ito Notepad?

    Read the article

  • Laptop battery: is voltage really important to respect?

    - by Fox
    I got an Acer Aspire 5100 and I just bought a new battery (after the stock battery just died yesterday). But I saw something after buying and I'm wondering whether it's really important or not. My stock battery was a 6-cell 4000mah 11.1v and the new battery is an 8-cell 4800mah 14.8v . I know that 8-cell and 4800mah is okay, but what about the 14.8v instead of 11.1v? The battery description says it's compatible with my laptop model (AS5100, model BL51), but the voltage difference makes me wonder. Will the laptop only take what it needs? Or will it be getting 14.8v straight in the brain? I know that my wall plug claims to output 19v, so logically I'm thinking a higher voltage battery shouldn't be a problem. Am I correct in thinking this? Thanks in advance for your answers!

    Read the article

  • Tips On Using The Service Contracts Import Program

    - by LuciaC
    Prior to release 12.1 there was no supported way to import contracts into the EBS Service Contracts application - there were no public APIs nor contract load programs provided.  From release 12.1 onwards the 'Service Contracts Import Program' is provided to load service contracts into the application. The Service Contracts Import functionality is explained in How to Use the Service Contracts Import Program - Scope and Limitations (Doc ID 1057242.1).  This note includes an attached document which explains the program architecture, shows the Entity Relationship Diagram and details the interface table definitions. The Import program takes data from the interface tables listed below and populates the contracts schema tables:  OKS_USAGE_COUNTERS_INTERFACE OKS_SALES_CREDITS_INTERFACEOKS_NOTES_INTERFACEOKS_LINES_INTERFACEOKS_HEADERS_INTERFACEOKS_COVERED_LEVELS_INTERFACEThese interface tables must be loaded via a custom load program.The Service Contracts Import concurrent request is then submitted to create contracts from this legacy data. The parameters to run the Import program are:  Parameter Description  Mode Validate only, Import  Batch Number Batch_Id (unique id populated into the OKS_HEADERS_INTERFACE table)  Number of Workers Number of workers required (these are spawned as separate sub-requests)  Commit size Represents number of successfully processed contracts commited to database The program spawns sub-requests for the import worker(s) and the 'Service Contracts Import Report'.  The data is validated prior to import and into the Contracts tables and will report errors in the Service Contracts Import Report program output file (Import Execution Report).  Troubleshooting tips are provided in R12.1 - Common Service Contract Import Errors (Doc ID 762545.1); this document lists some, but not all, import errors.  The document will be updated over time.  Additional help is given in Debugging Tip for Service Contracts Import Errors (Doc ID 971426.1).After you successfully import contracts, you can purge the records from the interface tables by running the Service Contracts Import Purge concurrent program. Note that there is no supported way to mass delete data from the Contracts schema tables once they are populated, so data loaded by the Import program must be fully tested and verified before the program is run to load data into a Production system.A Service Contracts Import Test program has been provided which will take an existing contract in the application and load the interface tables using the data from that contract.  This can be used as an example for guidance on how to load the interface tables.  The Test program functionality is explained in How to Use the Service Contracts Test Import Program Provided in Release 12.1 (Doc ID 761209.1).  Note that the Test program has some limitations which do not apply to the full Import program and is not a supported program, it is simply a testing tool.  

    Read the article

  • LM Sensors always returning same (invalid) value for one temp sensor

    - by pkaeding
    I am trying to monitor the temp sensors on a server, and plot them using Cacti. I have lm-sensors installed and working correctly. For example, here is the output from sensors: % sensors acpitz-virtual-0 Adapter: Virtual device temp1: +26.8 C (crit = +100.0 C) temp2: +32.0 C (crit = +60.0 C) coretemp-isa-0000 Adapter: ISA adapter Core 0: +36.0 C (high = +105.0 C, crit = +105.0 C) coretemp-isa-0001 Adapter: ISA adapter Core 1: +42.0 C (high = +105.0 C, crit = +105.0 C) However, when I try to get this data via SNMP, I get only one sensor's temperature correctly, and another one always returns 100.000 C: % snmpwalk -Os -c public -v 1 10.8.0.18 -m ALL lmTempSensors lmTempSensorsIndex.1 = INTEGER: 0 lmTempSensorsIndex.2 = INTEGER: 1 lmTempSensorsDevice.1 = STRING: temp1 lmTempSensorsDevice.2 = STRING: temp1 lmTempSensorsValue.1 = Gauge32: 26800 lmTempSensorsValue.2 = Gauge32: 100000 So, my question is two-fold: Why is the second sensor that is returned by SNMP giving a value of 100 C (when it should be 32 C) Why are my CPU core sensors not being returned by SNMP?

    Read the article

  • pam_exec.so PAM module does not export variable PAM_USER as stated in the documentation

    - by davidparks21
    I'm trying to use the pam_exec.so PAM module to execute a script which needs to know the username/password coming from the application (OpenVPN in this case). I have a script that executes printenv >>afile, but I don't see all the environment variables that the man pages states that pam_exec.so exports (namely PAM_USER I think), I only see the following: PAM_SERVICE=openvpn PAM_TYPE=auth PWD=/usr/local/openvpn/bin SHLVL=1 A__z="*SHLVL I do successfully pick up the password off of STDIN and output it with this same script. But for the life of me I can't get the username. Any thoughts on what I should try next?

    Read the article

  • Problem Activating “Windows Communication Foundation Non-HTTP Activation” feature in Windows 7

    - by Escobar5
    Hello, I'm having the following problem. I'm installing SharePoint 2010 Beta so I need to activate the windows feature "Windows Communication Foundation Non-HTTP Activation". The problem is I cannot activate it, i get the message: "An error has occurred. Not all features were successfully changed" When i look at the log (C:\Windows\Logs\CBS\CBS.log) I found this error: Process output: [l:186 [186]"SMConfigInstaller[Error]: Failed in calling 'StartService' for service 'NetTcpActivator'. Error code: 0x8007042c Anyone can give me a clue of what is happening here?

    Read the article

  • Where does power consumption go in a computer?

    - by Johannes Rössel
    Today we had a weird discussion over lunch: What exactly causes power consumption in a computer, particularly in the CPU? Figures you usually see indicate that only a percentage (albeit a large one) of the power consumption ends up in heat. However, what exactly does happen with the rest? A CPU isn't (anymore) a device that mechanically moves parts, emits light or uses other ways of transforming energy. Conservation of energy dictates that all energy going in has to go out somewhere and for something like a CPU I seriously can't imagine that output being anything but heat. Us being computer science instead of electrical engineering students certainly didn't help in accurately answering the question.

    Read the article

< Previous Page | 558 559 560 561 562 563 564 565 566 567 568 569  | Next Page >