Search Results

Search found 15137 results on 606 pages for 'global state'.

Page 563/606 | < Previous Page | 559 560 561 562 563 564 565 566 567 568 569 570  | Next Page >

  • Need an end of lexical scope action which can die normally

    - by Schwern
    I need the ability to add actions to the end of a lexical block where the action might die. And I need the exception to be thrown normally and be able to be caught normally. Unfortunately, Perl special cases exceptions during DESTROY both by adding "(in cleanup)" to the message and making them untrappable. For example: { package Guard; use strict; use warnings; sub new { my $class = shift; my $code = shift; return bless $code, $class; } sub DESTROY { my $self = shift; $self->(); } } use Test::More tests => 2; my $guard_triggered = 0; ok !eval { my $guard = Guard->new( #line 24 sub { $guard_triggered++; die "En guarde!" } ); 1; }, "the guard died"; is $@, "En guarde! at $@ line 24\n", "with the right error message"; is $guard_triggered, 1, "the guard worked"; I want that to pass. Currently the exception is totally swallowed by the eval. This is for Test::Builder2, so I cannot use anything but pure Perl. The underlying issue is I have code like this: { $self->setup; $user_code->(); $self->cleanup; } That cleanup must happen even if the $user_code dies, else $self gets into a weird state. So I did this: { $self->setup; my $guard = Guard->new(sub { $self->cleanup }); $user_code->(); } The complexity comes because the cleanup runs arbitrary user code and it is a use case where that code will die. I expect that exception to be trappable and unaltered by the guard. I'm avoiding wrapping everything in eval blocks because of the way that alters the stack.

    Read the article

  • Post calls RedirectToAction but view specified in RedirectToAction is not rendered

    - by W4IK
    Here's some of the html <form id="frmSubmit" action="/Viewer" style="display:none;"> <div id="renderSubmit" class="renderReport"> <input type="hidden" name="reportYear" id="reportYear" value="" /> <input type="hidden" name="reportMonth" id="reportMonth" value="" /> <input type="hidden" name="propIds" id="propIds" value="" /> <input type="hidden" name="reportName" id="reportName" value="" /> <input type="hidden" name="reportYearFrom" id="reportYearFrom" value="" /> <input type="hidden" name="reportMonthFrom" id="reportMonthFrom" value="" /> <input type="hidden" name="reportYearTo" id="reportYearTo" value="" /> <input type="hidden" name="reportMonthTo" id="reportMonthTo" value="" /> </div> </form> a little further down the page <div id="reportList" class="renderReport"> <fieldset style="width:105%;"> <legend class="reportStepLegend">Step 3. <br /> Click a report name below to view a report</legend> <br /> <% foreach (ReportMetaData item in (ReportMetaDataContainer)ViewData.Model) { %> <div> <input id=<%=item.SSRSName%> type="button" class="reportLink" value="<%=item.DisplayName%>" /> </div> <%}%> </fieldset> </div> Here's the javascript that gets called when the button is clicked $('.reportLink').click(function() { if (CheckDateAndProps() === true) { $('#reportName').val(this.id); var formData = $("#frmSubmit").serializeArray(); $.post('Home/PostViewer/', formData); } }); Note...i did have the $.post like so earlier...but it didn't seem to make any difference $.post('Home/PostViewer/', formData, function(data) { alert(data.Result); }, "json"); Here's the controller code [AcceptVerbs(HttpVerbs.Post)] public ActionResult PostViewer(string reportYear, string reportMonth, string propIds, string reportName, string reportYearFrom, string reportMonthFrom, string reportYearTo, string reportMonthTo) { return RedirectToAction("Viewer"); } All is good in the world up to this point..I'm hitting the above method and all the values are populated. Here's the get ActionResult method [AcceptVerbs(HttpVerbs.Get)] public ActionResult Viewer(string reportYear, string reportMonth, string propIds, string reportName, string reportYearFrom, string reportMonthFrom, string reportYearTo, string reportMonthTo) { return View(); } I'm hitting this too...not seeing any values in the parameters...but that's just because I haven't passed them in yet...I don't think that's whats keeping the Viewer page from displaying.? Now...one would one expect the Viewer view to be rendered...right?...well all I see is the page that this was called from...it never displays the Viewer page???!!?!? Here's the routes from global.asax routes.MapRoute( "Viewer", // Route name "Home/Viewer", // URL with parameters new { controller = "Home", action = "Viewer" } // Parameter defaults ); routes.MapRoute( "Default", // Route name "{controller}/{action}/{id}", // URL with parameters new { controller = "Home", action = "Index", id = "" } // Parameter defaults ); I can browse directly to the page http://localhost:50083/Home/Viewer and when I do so I hit the get ActionResult method and the page renders just fine. Any help is greatly appreciated!

    Read the article

  • How do I effectively fake a div's background color using an image in the body element?

    - by janoChen
    I want to get something like the following: The dark grey is the sidebar but I want to apply that color into the body element as an image which repeats itself vertically but at the same time doesn't cover the footer (light gray). (this is the easiest way I found to stretch the color (dark gray) until the bottom.) Part of my CSS: body { color: #888; font-family: Arial, "MS Trebuchet", sans-serif; font-size: 75% } .container { margin: 0 auto; overflow: hidden; padding: 0 15px; width: 960px; } /* header */ #header { background: #444; } /* banner */ #header-top { overflow: hidden; height: 77px; width: 960px; /* ie6 hack */ } #lang { float: right; padding: 50px 0 0 0; } /* work */ #content { background: #EEE; } #content a { border-bottom: 0; } #mainbar { overflow: hidden; margin: 0 10px 0 0; width: 644; float: left; } #sidebar { background: #DDD; color: #777; overflow: hidden; margin: 20px 0 10px 0; padding: 15px; width: 240px; float: right; } #sidebar h3 { color: #888; } #about { margin: 0 0 20px; } /* footer */ #footer { color: #777; background: #DDD; clear: both; } /* contact */ #footer-top { line-height: 160%; overflow: hidden; padding: 30px 0; width: 960px; /* ie6 hack */ } #footer-bottom { font-size: 10px; margin: 15px auto; } Part of my HTML: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <meta http-equiv="X-UA-Compatible" content="IE=EmulateIE7"/> <title>Alex Chen - Web Development, Graphic Design, and Translation</title> <link rel="stylesheet" type="text/css" href="styles/global.css" /> </head> <body id="home"> <div id="header"> <div class="container"> <div id="header-top"> </div> </div><!-- .container --> </div><!-- #header --> <div id="content"> <div class="container"> <div id="mainbar"> </div> <!-- #mainbar--> <div id=sidebar> </div> <!-- #sidebar --> </div><!-- .container --> </div><!-- #content --> <div id="footer"> <div class="container"> <div id="footer-top"> </div><!-- #footer-top --> <div id="footer-bottom"> </div> </div><!-- .container --> </div><!-- #footer --> </body> </html>

    Read the article

  • apache tomcat loadbalancing clustering on ubuntu

    - by user740010
    i am facing a problem in clustering the tomcat with apache as a loadbalancer using mod_jk on ubuntu. i have install apache2 on my ubuntu 11.04 and i have downloaded tomcat7 created two copies and kept them at two different location. 1st one is at /home/net4u/vishal/test/tomcatA 2nd one is at /home/net4u/vishal/test1/tomcatB i have made following changes to server.xml file in /conf folder 1. <Server port="8205" shutdown="SHUTDOWN"> 2. <Connector port="8280" protocol="HTTP/1.1" connectionTimeout="20000" redirectPort="8443" /> 3.<Connector port="8209" protocol="AJP/1.3" redirectPort="8443" /> <Engine name="Catalina" defaultHost="localhost" jvmRoute="tomcatB"> 4. <Cluster className="org.apache.catalina.ha.tcp.SimpleTcpCluster"/> similarly i have modified other tomcat i.e tomcatA server.xml content of the server.xml is as follow: -- <!--The connectors can use a shared executor, you can define one or more named thread pools--> <!-- <Executor name="tomcatThreadPool" namePrefix="catalina-exec-" maxThreads="150" minSpareThreads="4"/> --> <!-- A "Connector" represents an endpoint by which requests are received and responses are returned. Documentation at : Java HTTP Connector: /docs/config/http.html (blocking & non-blocking) Java AJP Connector: /docs/config/ajp.html APR (HTTP/AJP) Connector: /docs/apr.html Define a non-SSL HTTP/1.1 Connector on port 8080 --> <Connector port="8280" protocol="HTTP/1.1" connectionTimeout="20000" redirectPort="8443" /> <!-- A "Connector" using the shared thread pool--> <!-- <Connector executor="tomcatThreadPool" port="8080" protocol="HTTP/1.1" connectionTimeout="20000" redirectPort="8443" /> --> <!-- Define a SSL HTTP/1.1 Connector on port 8443 This connector uses the JSSE configuration, when using APR, the connector should be using the OpenSSL style configuration described in the APR documentation --> <!-- <Connector port="8443" protocol="HTTP/1.1" SSLEnabled="true" maxThreads="150" scheme="https" secure="true" clientAuth="false" sslProtocol="TLS" /> --> <!-- Define an AJP 1.3 Connector on port 8009 --> <Connector port="8109" protocol="AJP/1.3" redirectPort="8443" /> <!-- An Engine represents the entry point (within Catalina) that processes every request. The Engine implementation for Tomcat stand alone analyzes the HTTP headers included with the request, and passes them on to the appropriate Host (virtual host). Documentation at /docs/config/engine.html --> <!-- You should set jvmRoute to support load-balancing via AJP ie : <Engine name="Catalina" defaultHost="localhost" jvmRoute="jvm1"> --> <Engine name="Catalina" defaultHost="localhost" jvmRoute="tomcatB"> <!--For clustering, please take a look at documentation at: /docs/cluster-howto.html (simple how to) /docs/config/cluster.html (reference documentation) --> <!-- uncomment for clustering--> <Cluster className="org.apache.catalina.ha.tcp.SimpleTcpCluster"/> <!-- Use the LockOutRealm to prevent attempts to guess user passwords via a brute-force attack --> <Realm className="org.apache.catalina.realm.LockOutRealm"> <!-- This Realm uses the UserDatabase configured in the global JNDI resources under the key "UserDatabase". Any edits that are performed against this UserDatabase are immediately available for use by the Realm. --> <Realm className="org.apache.catalina.realm.UserDatabaseRealm" resourceName="UserDatabase"/> </Realm> <Host name="localhost" appBase="webapps" unpackWARs="true" autoDeploy="true"> <!-- SingleSignOn valve, share authentication between web applications Documentation at: /docs/config/valve.html --> <!-- <Valve className="org.apache.catalina.authenticator.SingleSignOn" /> --> <!-- Access log processes all example. Documentation at: /docs/config/valve.html Note: The pattern used is equivalent to using pattern="common" --> <Valve className="org.apache.catalina.valves.AccessLogValve" directory="logs" prefix="localhost_access_log." suffix=".txt" pattern="%h %l %u %t &quot;%r&quot; %s %b" resolveHosts="false"/> </Host> </Engine> i have install libapache2-mod-jk step 1. i have Created jk.load file in /etc/apache2/mods-enabled/jk.load content is as follows: LoadModule jk_module /usr/lib/apache2/modules/mod_jk.so Create /etc/apache2/mods-enabled/jk.conf: JkWorkersFile /etc/apache2/workers.properties JkLogFile /var/log/apache2/jk.log JkMount /ecommerce/* worker1 JkMount /images/* worker1 JkMount /content/* worker1 step 2. Created workers.properties file in /etc/apache2/workers.properties content is as follows: workers.tomcat_home=/home/vishal/Desktop/test/tomcatA workers.java_home=/usr/lib/jvm/default-java ps=/ worker.list=tomcatA,tomcatB,loadbalancer   worker.tomcatA.port=8109 worker.tomcatA.host=localhost worker.tomcatA.type=ajp13 worker.tomcatA.lbfactor=1   worker.tomcatB.port=8209 worker.tomcatB.host=localhost worker.tomcatB.type=ajp13 worker.tomcatB.lbfactor=1 worker.loadbalancer.type=lb worker.loadbalancer.balanced_workers=tomcatA,tomcatB worker.loadbalancer.sticky_session=1 i tried the same thing on the windows machine it is working.

    Read the article

  • PL/SQL pre-compile and Code Quality checks in an automatted build environment?

    - by Lars Corneliussen
    We build software using Hudson and Maven. We have C#, java and last, but not least PL/SQL sources (sprocs, packages, DDL, crud) For C# and Java we do unit tests and code analysis, but we don't really know the health of our PL/SQL sources before we actually publish them to the target database. Requirements There are a couple of things we wan't to test in the following priority: Are the sources valid, hence "compilable"? For packages, with respect to a certain database, would they compile? Code Quality: Do we have code flaws like duplicates, too complex methods or other violations to a defined set of rules? Also, the tool must run head-less (commandline, ant, ...) we wan't to do analysis on a partial code base (changed sources only) Tools We did a little research and found the following tools that could potencially help: Cast Application Intelligence Platform (AIP): Seems to be a server that grasps information about "anything". Couldn't find a console version that would export in readable format. Toad for Oracle: The Professional version is said to include something called Xpert validates a set of rules against a code base. Sonar + PL/SQL-Plugin: Uses Toad for Oracle to display code-health the sonar-way. This is for browsing the current state of the code base. Semantic Designs DMSToolkit: Quite general analysis of source code base. Commandline available? Semantic Designs Clones Detector: Detects clones. But also via command line? Fortify Source Code Analyzer: Seems to be focussed on security issues. But maybe it is extensible? more... So far, Toad for Oracle together with Sonar seems to be an elegant solution. But may be we are missing something here? Any ideas? Other products? Experiences? Related Questions on SO: http://stackoverflow.com/questions/531430/any-static-code-analysis-tools-for-stored-procedures http://stackoverflow.com/questions/839707/any-code-quality-tool-for-pl-sql http://stackoverflow.com/questions/956104/is-there-a-static-analysis-tool-for-python-ruby-sql-cobol-perl-and-pl-sql

    Read the article

  • Can ping device from one computer and not the other

    - by Sean Duggan
    I've recently been assigned to work on a diagnostic program done in C++ which communicates with a piece of electronic equipment. Our normal scenario involves communicating via an RS232 interface, but I've been asked to make our program work over ethernet, source code having been done in Visual Basic. After much thrashing about trying to get the code to work and continuing to get 10049 Winsock errors when I tried to connect, I tried pinging the switch. From the computer the VB program is running on, I can see the switch via ping, nslookup, tracert, and pathping (I was going down the list of programs) and I can do this via URI or IP address. From my laptop, sending the same commands fails every time. They're both using the same network cable and the same USB-to-Ethernet device (I've been swapping them between tests) but one can see the switch and the other cannot. I'm working on the programming end, but the ping results makes me think that there might be a network issue stymieing me. wry grin I'm not much of a network guy, so I'm appealing to expert assistance. Both computers are running Windows XP if that helps. The connection is to an "IP-RS8" device which then connects to our VCU-C units. Each unit is accessible via URI or IP address on the desktop computer we usually have connected to the units (it's running the older VB program that I was asked to lift the networking code from). The connection is made via a USB-to-Ethernet adapter so as to leave the regular Ethernet port available for connecting to the company network. Hmm... come to think of it, I've probably been confusing the issue, talking about pinging "the switch" rather than indicating that it's the devices. My apologies. Communication is generally done with a DLL that uses Winsock functions to make queries for data from the VCU and then to receive. I'm failing when connecting. I haven't found anything on the firewall which should block these commands, but I'll keep poking. I don't know if it's potentially relevant, but on the desktop, the adapter maps to Local Area Connection 3 while on the laptop, it consistently maps to Local Area Connection 2. Currently reading up on DHCP. IPConfig /all results: Desktop Host Name . . . . . . . . . . . . : AMERDAEXXXXXX Primary Dns Suffix . . . . . . . : amer.example.com Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : COMPANY.com amer.example.com atle.example.com cone.example.com apac.example.com scan.example.com bYX.example.com Ethernet adapter Local Area Connection X: Connection-specific DNS Suffix . : amer.example.com Description . . . . . . . . . . . : Broadcom NetXtreme XYxx Gigabit Controller Physical Address. . . . . . . . . : YY-XX-YB-XX-XX-XX Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : XYY.XXX.XY.XXX Subnet Mask . . . . . . . . . . . : XXX.XXX.XXY.Y Default Gateway . . . . . . . . . : XYY.XXX.XY.X DHCP Server . . . . . . . . . . . : XY.XXX.XXY.XX DNS Servers . . . . . . . . . . . : XY.XXX.XXY.XX XY.XXY.XXY.XX Primary WINS Server . . . . . . . : XY.XXX.XXY.X Secondary WINS Server . . . . . . : XY.XXY.XXY.X Lease Obtained. . . . . . . . . . : Thursday, July XX, XYXX XY:XX:XX AM Lease Expires . . . . . . . . . . : Sunday, July XX, XYXX XY:XX:XX AM Ethernet adapter Local Area Connection X: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : ASIX axYYYYX USBX.Y to Fast Ethernet Adapter Physical Address. . . . . . . . . : YY-XY-BY-YX-XY-AY Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : XY.Y.Y.X Subnet Mask . . . . . . . . . . . : XXX.XXX.XXY.Y Default Gateway . . . . . . . . . : XY.Y.Y.X DHCP Server . . . . . . . . . . . : XY.Y.Y.XY DNS Servers . . . . . . . . . . . : XY.Y.Y.X Lease Obtained. . . . . . . . . . : Thursday, July XX, XYXX XY:XX:XY AM Lease Expires . . . . . . . . . . : Tuesday, August YX, XYXX XX:XY:XY AM Laptop Windows IP Configuration Host Name . . . . . . . . . . . . : AMERLAFYYXXYX Primary Dns Suffix . . . . . . . : amer.example.com Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : COMPANY.com amer.example.com atle.example.com cone.example.com apac.example.com scan.example.com bYX.example.com Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : amer.example.com Description . . . . . . . . . . . : Intel(R) 82567LM Gigabit Network Connection Physical Address. . . . . . . . . : YY-XY-BY-DY-XB-YX Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : XYY.XXX.XY.XY Subnet Mask . . . . . . . . . . . : XXX.XXX.XXY.Y Default Gateway . . . . . . . . . : XYY.XXX.XY.X DHCP Server . . . . . . . . . . . : XY.XXX.XXY.XX DNS Servers . . . . . . . . . . . : XY.XXX.XXY.XX XY.XXY.XXY.XX Primary WINS Server . . . . . . . : XY.XXX.XXY.X Secondary WINS Server . . . . . . : XY.XXY.XXY.X Lease Obtained. . . . . . . . . . : Thursday, July XX, XYXX XX:XX:XX AM Lease Expires . . . . . . . . . . : Sunday, July XX, XYXX XX:XX:XX AM Ethernet adapter {XYXAAYXX-YEDY-XXYX-YYEX-BYXYXXYEEYEX}: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Nortel IPSECSHM Adapter - Packet Scheduler iniport Physical Address. . . . . . . . . : XX-XX-XX-XX-XX-YY Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : Y.Y.Y.Y Subnet Mask . . . . . . . . . . . : Y.Y.Y.Y Default Gateway . . . . . . . . . : Ethernet adapter Leaf Networks Adapter: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Leaf Networks Adapter Physical Address. . . . . . . . . : YY-FF-FA-BC-YF-AY Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : X.XYY.XY.XX Subnet Mask . . . . . . . . . . . : XXX.Y.Y.Y Default Gateway . . . . . . . . . : Ethernet adapter Local Area Connection 3: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Bluetooth LAN Access Server Driver Physical Address. . . . . . . . . : YY-FX-AX-YA-BY-CA Ethernet adapter Wireless Network Connection 2: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Intel(R) WiFi Link 5300 AGN Physical Address. . . . . . . . . : YY-XX-YA-CX-FC-YE Ethernet adapter Local Area Connection 2: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : ASIX ax88772 USB2.0 to Fast Ethernet Adapter Physical Address. . . . . . . . . : YY-XY-BY-YX-XY-AY Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : XYX.XYY.X.X Subnet Mask . . . . . . . . . . . : XXX.XXX.XXX.Y Default Gateway . . . . . . . . . :

    Read the article

  • .NET 2.0 Process Elevation for App Installation

    - by Brian Gillespie
    We have an application written in both C++ and .NET that installs for all users in the Program Files folder. This application downloads new versions of itself (as MSI installers) and spawns the new installer process to replace itself. The install process as it exists today: Copy an install manager app (C#, .NET 2.0) to the temp directory. Call this 'Manager' Manager is executed with elevated privs per this article. The original application exits. Manager spawns the MSI installer (with elevated privs, since the copy is elevated) Manager spawns the new version of the app. The bug: The newly installed app is running in an elevated state. This causes problems I won't enumerate here. Ideally, the launch of the newly installed app would be run with the permissions of the original user. I can't figure out how to demote the app back to being the standard user after elevation. An inelegant hack: (yeah, yeah, this whole process is inelegant anyway) Copy the install manager to the temp directory Run the install manager with standard user privs. Lets call this instance 'LowlyManager'. Original application exits. LowlyManager spawns the app again, this time with elevated privs. Let's name this instance 'UpperManagement' UpperManagement spawns the installer UpperManagement exits gracefully, returning the exit code of the installer. LowlyManager interprets the error code from UpperManagement, and spawns the newly installed application. This time as the original invoker. Is there a better way to do this? (I've left out a bunch of other details before and after these steps that make the process smoother for the user, but this should be enough to understand the core of the problem I'm trying to solve.) Other requirements: We can't install as a per-user app The user shouldn't be presented with an authentication dialog box if UAC would have simply asked "are you sure you want to allow this?". I think this might kill a solution using WindowsImpersonationContext, but I'm not sure. The system needs to work on XP, Vista, and Windows 7 (even if there is a separate process for XP).

    Read the article

  • Connecting a LAN to an OpenVPN server via a windows 7 client gateway

    - by user705142
    I've got OpenVPN set up between my windows 7 client and linux server. The goal is that I'll get secure access to a webapp running on the server from any computer on the client LAN. I'm using ccd to assign static ip addresses to each client connection, with key authentication. It's working on my client machine (10.83.41.9), and when you go to the gateway IP address (10.83.41.1), it loads up the webapp. Now I really need the other computers on the client LAN to be able to connect to the webapp as well, via the windows machine. The client has a static IP address of 192.168.2.100 on the LAN, and I've enabled IP forwarding in windows (confirmed by ipconfig /all). In my router I've forwarded 10.83.41.1 / 255.255.255.255 to 192.168.2.100. In server.conf I have.. route 192.168.2.0 255.255.255.0 And in the office ccd.. ifconfig-push 10.83.41.9 10.83.41.10 iroute 192.168.2.0 255.255.255.0 The client log is as follows: Thu Mar 15 20:19:56 2012 OpenVPN 2.2.2 Win32-MSVC++ [SSL] [LZO2] [PKCS11] built on Dec 15 2011 Thu Mar 15 20:19:56 2012 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables Thu Mar 15 20:19:56 2012 Control Channel Authentication: using 'ta.key' as a OpenVPN static key file Thu Mar 15 20:19:56 2012 Outgoing Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication Thu Mar 15 20:19:56 2012 Incoming Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication Thu Mar 15 20:19:56 2012 LZO compression initialized Thu Mar 15 20:19:56 2012 Control Channel MTU parms [ L:1558 D:166 EF:66 EB:0 ET:0 EL:0 ] Thu Mar 15 20:19:56 2012 Socket Buffers: R=[8192->8192] S=[64512->64512] Thu Mar 15 20:19:56 2012 Data Channel MTU parms [ L:1558 D:1450 EF:58 EB:135 ET:0 EL:0 AF:3/1 ] Thu Mar 15 20:19:56 2012 Local Options hash (VER=V4): '9e7066d2' Thu Mar 15 20:19:56 2012 Expected Remote Options hash (VER=V4): '162b04de' Thu Mar 15 20:19:56 2012 UDPv4 link local: [undef] Thu Mar 15 20:19:56 2012 UDPv4 link remote: 111.65.224.202:1194 Thu Mar 15 20:19:56 2012 TLS: Initial packet from 111.65.224.202:1194, sid=ceb04c22 8cc6d151 Thu Mar 15 20:19:56 2012 VERIFY OK: depth=1, /C=NZ/O=XXX./CN=XXX Thu Mar 15 20:19:56 2012 VERIFY OK: nsCertType=SERVER Thu Mar 15 20:19:56 2012 VERIFY OK: depth=0, /C=NZ/O=XXX./CN=XXX Thu Mar 15 20:19:56 2012 Replay-window backtrack occurred [1] Thu Mar 15 20:19:56 2012 Data Channel Encrypt: Cipher 'AES-256-CBC' initialized with 256 bit key Thu Mar 15 20:19:56 2012 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Thu Mar 15 20:19:56 2012 Data Channel Decrypt: Cipher 'AES-256-CBC' initialized with 256 bit key Thu Mar 15 20:19:56 2012 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Thu Mar 15 20:19:56 2012 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Thu Mar 15 20:19:56 2012 [server] Peer Connection Initiated with 111.65.224.202:1194 Thu Mar 15 20:19:58 2012 SENT CONTROL [server]: 'PUSH_REQUEST' (status=1) Thu Mar 15 20:19:59 2012 PUSH: Received control message: 'PUSH_REPLY,route 10.83.41.1,topology net30,ping 10,ping-restart 120,ifconfig 10.83.41.9 10.83.41.10' Thu Mar 15 20:19:59 2012 OPTIONS IMPORT: timers and/or timeouts modified Thu Mar 15 20:19:59 2012 OPTIONS IMPORT: --ifconfig/up options modified Thu Mar 15 20:19:59 2012 OPTIONS IMPORT: route options modified Thu Mar 15 20:19:59 2012 ROUTE default_gateway=192.168.2.1 Thu Mar 15 20:19:59 2012 TAP-WIN32 device [OpenVPN] opened: \\.\Global\{B32D85C9-1942-42E2-80BA-7E0B5BB5185F}.tap Thu Mar 15 20:19:59 2012 TAP-Win32 Driver Version 9.9 Thu Mar 15 20:19:59 2012 TAP-Win32 MTU=1500 Thu Mar 15 20:19:59 2012 Notified TAP-Win32 driver to set a DHCP IP/netmask of 10.83.41.9/255.255.255.252 on interface {B32D85C9-1942-42E2-80BA-7E0B5BB5185F} [DHCP-serv: 10.83.41.10, lease-time: 31536000] Thu Mar 15 20:19:59 2012 Successful ARP Flush on interface [45] {B32D85C9-1942-42E2-80BA-7E0B5BB5185F} Thu Mar 15 20:20:04 2012 TEST ROUTES: 1/1 succeeded len=1 ret=1 a=0 u/d=up Thu Mar 15 20:20:04 2012 C:\WINDOWS\system32\route.exe ADD 10.83.41.1 MASK 255.255.255.255 10.83.41.10 Thu Mar 15 20:20:04 2012 ROUTE: CreateIpForwardEntry succeeded with dwForwardMetric1=30 and dwForwardType=4 Thu Mar 15 20:20:04 2012 Route addition via IPAPI succeeded [adaptive] Thu Mar 15 20:20:04 2012 Initialization Sequence Completed From the other machines I can ping 192.169.2.100, but not 10.83.41.1. In the how-to, it mentions "Make sure your network interface is in promiscuous mode." as well. I can't find in the windows network config, so this may or may not be part of it. Ideally this would be achieved without any special configuration the other LAN computers. Not sure how far I'm going to get on my own at this point, any ideas? Is there something I'm missing, or anything I should need to know?

    Read the article

  • No value given for one or more required parameters in connection initialisation

    - by DarkJaff
    Hi everyone, I have an C# form application that use an access database. This application works perfectly in debug and release. It works on all version of Windows. But it crash on one computer with Windows 7. The message I got is: System.Data.OleDb.OleDbException: No value given for one or more required parameters. The function that is supposely not working is this: public void InitConnection(string strFile) { string strConnection = String.Format("Provider=Microsoft.Jet.OLEDB.4.0;Data Source={0};User Id=admin;Password=;", strFile); m_conn = new OleDbConnection(strConnection); try { //On vérifie si la connexion n'est pas ouverte if (m_conn.State != ConnectionState.Open) { m_conn.Open(); m_VCoeffModele = GetModeleCoeff(); } } catch (Exception err) { throw err; } } I think it's something related to the connection string but why only on that computer. Thanks for your help! DarkJaff EDIT Here is the complete error message: See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box. ***** Exception Text ******* System.Data.OleDb.OleDbException: No value given for one or more required parameters. at System.Data.OleDb.OleDbCommand.ExecuteCommandTextErrorHandling(OleDbHResult hr) at System.Data.OleDb.OleDbCommand.ExecuteCommandTextForSingleResult(tagDBPARAMS dbParams, Object& executeResult) at System.Data.OleDb.OleDbCommand.ExecuteCommandText(Object& executeResult) at System.Data.OleDb.OleDbCommand.ExecuteCommand(CommandBehavior behavior, Object& executeResult) at System.Data.OleDb.OleDbCommand.ExecuteReaderInternal(CommandBehavior behavior, String method) at System.Data.OleDb.OleDbCommand.ExecuteReader(CommandBehavior behavior) at System.Data.OleDb.OleDbCommand.ExecuteReader() at DatabaseLayer.DatabaseFacade.GetModeleCoeff() at DatabaseLayer.DatabaseFacade.InitConnection(String strFile) at CalculatriceCHW.ListeMesure.OuvrirFichier(String strFichier) at CalculatriceCHW.ListeMesure.nouveauFichierMenu_Click(Object sender, EventArgs e) at System.Windows.Forms.ToolStripItem.RaiseEvent(Object key, EventArgs e) at System.Windows.Forms.ToolStripMenuItem.OnClick(EventArgs e) at System.Windows.Forms.ToolStripItem.HandleClick(EventArgs e) at System.Windows.Forms.ToolStripItem.HandleMouseUp(MouseEventArgs e) at System.Windows.Forms.ToolStripItem.FireEventInteractive(EventArgs e, ToolStripItemEventType met) at System.Windows.Forms.ToolStripItem.FireEvent(EventArgs e, ToolStripItemEventType met) at System.Windows.Forms.ToolStrip.OnMouseUp(MouseEventArgs mea) at System.Windows.Forms.ToolStripDropDown.OnMouseUp(MouseEventArgs mea) at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks) at System.Windows.Forms.Control.WndProc(Message& m) at System.Windows.Forms.ScrollableControl.WndProc(Message& m) at System.Windows.Forms.ToolStrip.WndProc(Message& m) at System.Windows.Forms.ToolStripDropDown.WndProc(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m) at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

    Read the article

  • Binding CoreData Managed Object to NSTextFieldCell subclass

    - by ndg
    I have an NSTableView which has its first column set to contain a custom NSTextFieldCell. My custom NSTextFieldCell needs to allow the user to edit a "desc" property within my Managed Object but to also display an "info" string that it contains (which is not editable). To achieve this, I followed this tutorial. In a nutshell, the tutorial suggests editing your Managed Objects generated subclass to create and pass a dictionary of its contents to your NSTableColumn via bindings. This works well for read-only NSCell implementations, but I'm looking to subclass NSTextFieldCell to allow the user to edit the "desc" property of my Managed Object. To do this, I followed one of the articles comments, which suggests subclassing NSFormatter to explicitly state which Managed Object property you would like the NSTextFieldCell to edit. Here's the suggested implementation: @implementation TRTableDescFormatter - (BOOL)getObjectValue:(id *)anObject forString:(NSString *)string errorDescription:(NSString **)error { if (anObject != nil){ *anObject = [NSDictionary dictionaryWithObject:string forKey:@"desc"]; return YES; } return NO; } - (NSString *)stringForObjectValue:(id)anObject { if (![anObject isKindOfClass:[NSDictionary class]]) return nil; return [anObject valueForKey:@"desc"]; } - (NSAttributedString*)attributedStringForObjectValue:(id)anObject withDefaultAttributes:(NSDictionary *)attrs { if (![anObject isKindOfClass:[NSDictionary class]]) return nil; NSAttributedString *anAttributedString = [[NSAttributedString alloc] initWithString: [anObject valueForKey:@"desc"]]; return anAttributedString; } @end I assign the NSFormatter subclass to my cell in my NSTextFieldCell subclass, like so: - (void)awakeFromNib { TRTableDescFormatter *formatter = [[[TRTableDescFormatter alloc] init] autorelease]; [self setFormatter:formatter]; } This seems to work, but falls down when editing multiple rows. The behaviour I'm seeing is that editing a row will work as expected until you try to edit another row. Upon editing another row, all previously edited rows will have their "desc" value set to the value of the currently selected row. I've been doing a lot of reading on this subject and would really like to get to the bottom of this. What's more frustrating is that my NSTextFieldCell is rendering exactly how I would like it to. This editing issue is my last obstacle! If anyone can help, that would be greatly appreciated.

    Read the article

  • Cisco ASA 5505 - L2TP over IPsec

    - by xraminx
    I have followed this document on cisco site to set up the L2TP over IPsec connection. When I try to establish a VPN to ASA 5505 from my Windows XP, after I click on "connect" button, the "Connecting ...." dialog box appears and after a while I get this error message: Error 800: Unable to establish VPN connection. The VPN server may be unreachable, or security parameters may not be configured properly for this connection. ASA version 7.2(4) ASDM version 5.2(4) Windows XP SP3 Windows XP and ASA 5505 are on the same LAN for test purposes. Edit 1: There are two VLANs defined on the cisco device (the standard setup on cisco ASA5505). - port 0 is on VLAN2, outside; - and ports 1 to 7 on VLAN1, inside. I run a cable from my linksys home router (10.50.10.1) to the cisco ASA5505 router on port 0 (outside). Port 0 have IP 192.168.1.1 used internally by cisco and I have also assigned the external IP 10.50.10.206 to port 0 (outside). I run a cable from Windows XP to Cisco router on port 1 (inside). Port 1 is assigned an IP from Cisco router 192.168.1.2. The Windows XP is also connected to my linksys home router via wireless (10.50.10.141). Edit 2: When I try to establish vpn, the Cisco device real time Log viewer shows 7 entries like this: Severity:5 Date:Sep 15 2009 Time: 14:51:29 SyslogID: 713904 Destination IP = 10.50.10.141, Decription: No crypto map bound to interface... dropping pkt Edit 3: This is the setup on the router right now. Result of the command: "show run" : Saved : ASA Version 7.2(4) ! hostname ciscoasa domain-name default.domain.invalid enable password HGFHGFGHFHGHGFHGF encrypted passwd NMMNMNMNMNMNMN encrypted names name 192.168.1.200 WebServer1 name 10.50.10.206 external-ip-address ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address external-ip-address 255.0.0.0 ! interface Vlan3 no nameif security-level 50 no ip address ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive dns server-group DefaultDNS domain-name default.domain.invalid object-group service l2tp udp port-object eq 1701 access-list outside_access_in remark Allow incoming tcp/http access-list outside_access_in extended permit tcp any host WebServer1 eq www access-list outside_access_in extended permit udp any any eq 1701 access-list inside_nat0_outbound extended permit ip any 192.168.1.208 255.255.255.240 access-list inside_cryptomap_1 extended permit ip interface outside interface inside pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 ip local pool PPTP-VPN 192.168.1.210-192.168.1.220 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-524.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface www WebServer1 www netmask 255.255.255.255 access-group outside_access_in in interface outside timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute http server enable http 192.168.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set TRANS_ESP_3DES_SHA esp-3des esp-sha-hmac crypto ipsec transform-set TRANS_ESP_3DES_SHA mode transport crypto ipsec transform-set TRANS_ESP_3DES_MD5 esp-3des esp-md5-hmac crypto ipsec transform-set TRANS_ESP_3DES_MD5 mode transport crypto map outside_map 1 match address inside_cryptomap_1 crypto map outside_map 1 set transform-set TRANS_ESP_3DES_MD5 crypto map outside_map interface inside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash md5 group 2 lifetime 86400 telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.2-192.168.1.33 inside dhcpd enable inside ! group-policy DefaultRAGroup internal group-policy DefaultRAGroup attributes dns-server value 192.168.1.1 vpn-tunnel-protocol IPSec l2tp-ipsec username myusername password FGHFGHFHGFHGFGFHF nt-encrypted tunnel-group DefaultRAGroup general-attributes address-pool PPTP-VPN default-group-policy DefaultRAGroup tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key * tunnel-group DefaultRAGroup ppp-attributes no authentication chap authentication ms-chap-v2 ! ! prompt hostname context Cryptochecksum:a9331e84064f27e6220a8667bf5076c1 : end

    Read the article

  • The remote server returned an error: NotFound.

    - by xscape
    Hi, I'm trying to retrieve a string in my old webservice but it give me an error of The remote server returned an error: NotFound. and its InnerException is {System.Net.WebException: The remote server returned an error: NotFound. --- System.Net.WebException: The remote server returned an error: NotFound. at System.Net.Browser.BrowserHttpWebRequest.InternalEndGetResponse(IAsyncResult asyncResult) at System.Net.Browser.BrowserHttpWebRequest.<c_DisplayClass5.b_4(Object sendState) at System.Net.Browser.AsyncHelper.<c_DisplayClass2.b_0(Object sendState) --- End of inner exception stack trace --- at System.Net.Browser.AsyncHelper.BeginOnUI(SendOrPostCallback beginMethod, Object state) at System.Net.Browser.BrowserHttpWebRequest.EndGetResponse(IAsyncResult asyncResult) at System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelAsyncRequest.CompleteGetResponse(IAsyncResult result)} this is the method which error prompted, this method returns a string format void client_ValidateUserEncryptedCompleted(object sender, DummyWS.ValidateUserEncryptedCompletedEventArgs e) { object token = e.Result; client = new DummyWS.MachineHistoryWSSoapClient(); if (token != null) { client.GetSummaryXMLAsync(token, "", ""); } } I am currently using Silverlight 4.0 and my ServiceReferences.ClientConfig is <configuration> <system.serviceModel> <bindings> <basicHttpBinding> <binding name="MachineHistoryWSSoap" maxBufferSize="2147483647" maxReceivedMessageSize="2147483647"> <security mode="None" /> </binding> </basicHttpBinding> </bindings> <client> <endpoint address="http://localhost/MHVwsModified/MachineHistoryWS.asmx" binding="basicHttpBinding" bindingConfiguration="MachineHistoryWSSoap" contract="DummyWS.MachineHistoryWSSoap" name="MachineHistoryWSSoap" /> </client> </system.serviceModel> My Web.Config in my web service is <configuration xmlns="http://schemas.microsoft.com/.NetConfiguration/v2.0"> <system.web> <compilation debug="true"> <assemblies> <add assembly="System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089" /></assemblies></compilation> <authentication mode="Windows" /> </system.web> <system.webServer> <directoryBrowse enabled="true" /> </system.webServer> Any help will be aprreciated thank you.

    Read the article

  • FFMPEG Segfault Solutions

    - by Brentley_11
    I'm trying to convert a bunch of movies into h.264 mp4's using FFMPEG. These movies are sourced from various portable camcorders such as the Flip Mino HD and the Kodak ZI8. One issue I'm having with video from the ZI8 is it seems to be causing FFMPEG to segfault. Here is my command: ffmpeg -i 'XmasSailor720p60fps.MOV' -threads 2 -acodec libfaac -ab 96kb -vcodec libx264 -vpre hq -b 500kb -s 484x272 XmasSailor.mp4 Here is the output: FFmpeg version SVN-r20668, Copyright (c) 2000-2009 Fabrice Bellard, et al. built on Dec 2 2009 18:37:34 with gcc 4.2.4 (Ubuntu 4.2.4-1ubuntu4) configuration: --enable-libfaac --enable-libfaad --enable-libmp3lame --enable-libx264 --enable-gpl --enable-nonfree --enable-postproc --enable-pthreads --enable-shared libavutil 50. 5. 1 / 50. 5. 1 libavcodec 52.42. 0 / 52.42. 0 libavformat 52.39. 2 / 52.39. 2 libavdevice 52. 2. 0 / 52. 2. 0 libswscale 0. 7. 2 / 0. 7. 2 libpostproc 51. 2. 0 / 51. 2. 0 Seems stream 0 codec frame rate differs from container frame rate: 59.94 (60000/1001) -> 29.97 (30000/1001) Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'XmasSailor720p60fps.MOV': Duration: 00:00:05.37, start: 0.000000, bitrate: 12021 kb/s Stream #0.0(eng): Video: h264, yuv420p, 1280x720 [PAR 1:1 DAR 16:9], 11994 kb/s, 29.97 tbr, 90k tbn, 59.94 tbc Stream #0.1(eng): Audio: aac, 48000 Hz, stereo, s16, 128 kb/s Metadata major_brand : qt minor_version : 0 compatible_brands: qt comment : KODAK Zi8 Pocket Video Camera comment-eng : KODAK Zi8 Pocket Video Camera [libx264 @ 0x99e1020]using SAR=1/1 [libx264 @ 0x99e1020]using cpu capabilities: MMX2 SSE2Fast SSSE3 FastShuffle SSE4.1 Cache64 [libx264 @ 0x99e1020]profile High, level 2.1 Output #0, mp4, to 'XmasSailor.mp4': Stream #0.0(eng): Video: libx264, yuv420p, 484x272 [PAR 1:1 DAR 121:68], q=10-51, 500 kb/s, 30k tbn, 29.97 tbc Stream #0.1(eng): Audio: aac, 48000 Hz, stereo, s16, 96 kb/s Metadata comment : Encoded with the Statusfirm Video Transcoder Stream mapping: Stream #0.0 -> #0.0 Stream #0.1 -> #0.1 Press [q] to stop encoding [h264 @ 0x99de950]B picture before any references, skipping [h264 @ 0x99de950]decode_slice_header error [h264 @ 0x99de950]no frame! Error while decoding stream #0.0 [h264 @ 0x99de950]B picture before any references, skipping [h264 @ 0x99de950]decode_slice_header error [h264 @ 0x99de950]no frame! Error while decoding stream #0.0 frame= 20 fps= 0 q=13797729.0 size= 0kB time=0.66 bitrate= 0.6kbits/s frame= 39 fps= 37 q=13797729.0 size= 0kB time=1.30 bitrate= 0.3kbits/s frame= 48 fps= 30 q=33.0 size= 11kB time=0.10 bitrate= 903.0kbits/s frame= 58 fps= 27 q=31.0 size= 22kB time=0.43 bitrate= 421.0kbits/s frame= 67 fps= 25 q=29.0 size= 41kB time=0.73 bitrate= 462.6kbits/s frame= 75 fps= 23 q=29.0 size= 59kB time=1.00 bitrate= 486.7kbits/s frame= 83 fps= 22 q=29.0 size= 81kB time=1.27 bitrate= 521.9kbits/s frame= 90 fps= 21 q=29.0 size= 97kB time=1.50 bitrate= 530.1kbits/s frame= 98 fps= 20 q=29.0 size= 114kB time=1.77 bitrate= 526.9kbits/s frame= 106 fps= 20 q=29.0 size= 134kB time=2.04 bitrate= 537.7kbits/s frame= 114 fps= 19 q=29.0 size= 150kB time=2.30 bitrate= 533.7kbits/s frame= 122 fps= 19 q=29.0 size= 172kB time=2.57 bitrate= 547.8kbits/s frame= 130 fps= 19 q=29.0 size= 193kB time=2.84 bitrate= 557.5kbits/s frame= 136 fps= 18 q=29.0 size= 211kB time=3.04 bitrate= 570.0kbits/s frame= 144 fps= 18 q=29.0 size= 242kB time=3.30 bitrate= 599.5kbits/s frame= 152 fps= 17 q=30.0 size= 261kB time=3.57 bitrate= 598.6kbits/s frame= 157 fps= 15 q=-1.0 Lsize= 368kB time=5.21 bitrate= 579.3kbits/s video:302kB audio:61kB global headers:0kB muxing overhead 1.416371% [libx264 @ 0x99e1020]frame I:1 Avg QP:27.22 size: 8720 [libx264 @ 0x99e1020]frame P:48 Avg QP:25.15 size: 3759 [libx264 @ 0x99e1020]frame B:108 Avg QP:30.10 size: 1105 [libx264 @ 0x99e1020]consecutive B-frames: 0.6% 11.5% 28.8% 59.0% [libx264 @ 0x99e1020]mb I I16..4: 28.5% 47.6% 23.9% [libx264 @ 0x99e1020]mb P I16..4: 0.8% 1.3% 0.5% P16..4: 50.6% 17.7% 13.1% 0.0% 0.0% skip:15.9% [libx264 @ 0x99e1020]mb B I16..4: 0.2% 0.3% 0.1% B16..8: 44.0% 1.2% 2.6% direct: 5.1% skip:46.5% L0:45.5% L1:51.0% BI: 3.5% [libx264 @ 0x99e1020]final ratefactor: 23.51 [libx264 @ 0x99e1020]8x8 transform intra:49.9% inter:67.9% [libx264 @ 0x99e1020]direct mvs spatial:98.1% temporal:1.9% [libx264 @ 0x99e1020]coded y,uvDC,uvAC intra: 54.7% 76.1% 41.4% inter: 17.1% 24.4% 7.8% [libx264 @ 0x99e1020]i16 v,h,dc,p: 18% 52% 5% 25% [libx264 @ 0x99e1020]i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 12% 22% 9% 7% 10% 10% 9% 8% 13% [libx264 @ 0x99e1020]i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 13% 18% 8% 8% 10% 13% 10% 9% 12% [libx264 @ 0x99e1020]Weighted P-Frames: Y:10.4% [libx264 @ 0x99e1020]ref P L0: 60.2% 15.3% 11.0% 7.6% 5.2% 0.7% [libx264 @ 0x99e1020]ref B L0: 72.6% 15.6% 11.8% [libx264 @ 0x99e1020]kb/s:471.17 Segmentation fault I'm wondering if anyone else has ran into similar issues. I wasn't able to find anything helpful via Google. Another question I have is if anyone knows of a company that offers paid support for FFMPEG. Thank you for your time.

    Read the article

  • BindException/Too many file open while using HttpClient under load

    - by Langali
    I have got 1000 dedicated Java threads where each thread polls a corresponding url every one second. public class Poller { public static Node poll(Node node) { GetMethod method = null; try { HttpClient client = new HttpClient(new SimpleHttpConnectionManager(true)); ...... } catch (IOException ex) { ex.printStackTrace(); } finally { method.releaseConnection(); } } } The threads are run every one second: for (int i=0; i <1000; i++) { MyThread thread = threads.get(i) // threads is a static field if(thread.isAlive()) { // If the previous thread is still running, let it run. } else { thread.start(); } } The problem is if I run the job every one second I get random exceptions like these: java.net.BindException: Address already in use INFO httpclient.HttpMethodDirector: I/O exception (java.net.BindException) caught when processing request: Address already in use INFO httpclient.HttpMethodDirector: Retrying request But if I run the job every 2 seconds or more, everything runs fine. I even tried shutting down the instance of SimpleHttpConnectionManager() using shutDown() with no effect. If I do netstat, I see thousands of TCP connections in TIME_WAIT state, which means they are have been closed and are clearing up. So to limit the no of connections, I tried using a single instance of HttpClient and use it like this: public class MyHttpClientFactory { private static MyHttpClientFactory instance = new HttpClientFactory(); private MultiThreadedHttpConnectionManager connectionManager; private HttpClient client; private HttpClientFactory() { init(); } public static HttpClientFactory getInstance() { return instance; } public void init() { connectionManager = new MultiThreadedHttpConnectionManager(); HttpConnectionManagerParams managerParams = new HttpConnectionManagerParams(); managerParams.setMaxTotalConnections(1000); connectionManager.setParams(managerParams); client = new HttpClient(connectionManager); } public HttpClient getHttpClient() { if (client != null) { return client; } else { init(); return client; } } } However after running for exactly 2 hours, it starts throwing 'too many open files' and eventually cannot do anything at all. ERROR java.net.SocketException: Too many open files INFO httpclient.HttpMethodDirector: I/O exception (java.net.SocketException) caught when processing request: Too many open files INFO httpclient.HttpMethodDirector: Retrying request I should be able to increase the no of connections allowed and make it work, but I would just be prolonging the evil. Any idea what is the best practise to use HttpClient in a situation like above? Btw, I am still on HttpClient3.1.

    Read the article

  • Agilent E4426B signal generator locks up during multiple GPIB *SAV operations

    - by aspiehler
    I have a test fixture with an Agilent E4426B RF signal generator connected to a PC via a National Instrument Ethernet-to-GPIB bridge. My software is attempting to sanitize the instrument by presetting it and then saving the current state to all of the memory locations writable via the standard SCPI command "*SAV x,y". The loop works to a point, but eventually the instrument responds with an error and continuously displays the "L" icon on the front display and a "Remote preset" message at the bottom. At that point it won't respond to any more remote commands and I have to either cycle power or press LOCAL, then PRESET at which point it takes about 3 minutes to finish presetting. At that point the "L" icon is still present and and the next GPIB command sent to the instrument causes it to report a -113 error (undefined header) in the instrument error queue. I fired up NI spy to see what was happening, and found that the error was happening at the same point in the loop - "*SAV 6,2" in this case. From NI Spy: Send (0, 0x0017, "*SAV 6,2", 8 (0x8), NLend (0,0x01)) Process ID: 0x00000520 Thread ID: 0x00000518 ibsta:0xc168 iberr: 6 ibcntl: 2(0x2) And here's the code from the instrument driver: int CHP_E4426b::Erase() { if ((m_StatusCode = Initialize()) != GPIB_SUCCESS) // basically just sends "*RST" return m_StatusCode; m_SaveState = "*SAV %d, %d"; for (int i=0; i < 10; i++) for (int j=0; j < 100; j++) { sprintf(m_CmdString, m_SaveState, j, i); if ((m_StatusCode = Send(m_CmdString, strlen(m_CmdString))) != GPIB_SUCCESS) return m_StatusCode; } return GPIB_SUCCESS; } I tried putting a small Sleep() delay (10-20 ms) at the end of the inner loop, and to my surprise it caused the error to show up earlier rather than later. 10 ms caused the loop to error out at 44,1 and 20 ms was even sooner. I've already eliminated faulty cabling or the instrument as the culprit. This same type of sequence works without any error on a higher end signal generator, so I'm tempted to chalk this up to a bug in the instrument's firmware.

    Read the article

  • OpenGL Polygon Stipple Not Working On Different Machine

    - by FranticPedantic
    I have a situation where I am trying to draw a semi-transparent rectangle over a background that is not using openGL and so I can not use blending. I decided to use polygon stippling for a 'screen door transparency' effect as recommended by some. It works fine on my machine and some others, but on some machines with slightly old Intel graphics cards it's failing to render the rectangle at all. If I turn off polygon stipple, it renders fine (but without the stipple). I have compared many of the state variables that I thought might affect it (see code) between machines and they are all the same, and I get no errors. static const GLubyte stipplePatternChkr[128]; //definition omitted for clarity //but works on my machine // stipple the box glPolygonMode(GL_FRONT_AND_BACK, GL_FILL); glColor4ubv(Color(COLORREF_PADGRAY)); glEnable(GL_POLYGON_STIPPLE); glPolygonStipple(stipplePatternChkr); CRect rcStipple(dim); rcStipple.DeflateRect(padding - 1, padding - 1); glBegin(GL_QUADS); glVertex2i(rcStipple.left, rcStipple.bottom); glVertex2i(rcStipple.right, rcStipple.bottom); glVertex2i(rcStipple.right, rcStipple.top); glVertex2i(rcStipple.left, rcStipple.top); glEnd(); glDisable(GL_POLYGON_STIPPLE); int err = glGetError(); if (err != GL_NO_ERROR) { TRACE("glError(%s: %s)\n", s, gluErrorString(err)); } float x; glGetFloatv(GL_UNPACK_ALIGNMENT, &x); TRACE("unpack alignment %f\n", x); glGetFloatv(GL_UNPACK_IMAGE_HEIGHT, &x); TRACE("unpack height %f\n", x); glGetFloatv(GL_UNPACK_LSB_FIRST, &x); TRACE("unpack lsb %f\n", x); glGetFloatv(GL_UNPACK_ROW_LENGTH, &x); TRACE("unpack length %f\n", x); glGetFloatv(GL_UNPACK_SKIP_PIXELS, &x); TRACE("upnack skip %f\n", x); glGetFloatv(GL_UNPACK_SWAP_BYTES, &x); TRACE("upnack swap %f\n", x);

    Read the article

  • How to properly test Hibernate length restriction?

    - by Cesar
    I have a POJO mapped with Hibernate for persistence. In my mapping I specify the following: <class name="ExpertiseArea"> <id name="id" type="string"> <generator class="assigned" /> </id> <version name="version" column="VERSION" unsaved-value="null" /> <property name="name" type="string" unique="true" not-null="true" length="100" /> ... </class> And I want to test that if I set a name longer than 100 characters, the change won't be persisted. I have a DAO where I save the entity with the following code: public T makePersistent(T entity){ transaction = getSession().beginTransaction(); transaction.begin(); try{ getSession().saveOrUpdate(entity); transaction.commit(); }catch(HibernateException e){ logger.debug(e.getMessage()); transaction.rollback(); } return entity; } Actually the code above is from a GenericDAO which all my DAOs inherit from. Then I created the following test: public void testNameLengthMustBe100orLess(){ ExpertiseArea ea = new ExpertiseArea( "1234567890" + "1234567890" + "1234567890" + "1234567890" + "1234567890" + "1234567890" + "1234567890" + "1234567890" + "1234567890" + "1234567890"); assertTrue("Name should be 100 characters long", ea.getName().length() == 100); ead.makePersistent(ea); List<ExpertiseArea> result = ead.findAll(); assertEquals("Size must be 1", result.size(),1); ea.setName(ea.getName()+"1234567890"); ead.makePersistent(ea); ExpertiseArea retrieved = ead.findById(ea.getId(), false); assertTrue("Both objects should be equal", retrieved.equals(ea)); assertTrue("Name should be 100 characters long", (retrieved.getName().length() == 100)); } The object is persisted ok. Then I set a name longer than 100 characters and try to save the changes, which fails: 14:12:14,608 INFO StringType:162 - could not bind value '12345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890' to parameter: 2; data exception: string data, right truncation 14:12:14,611 WARN JDBCExceptionReporter:100 - SQL Error: -3401, SQLState: 22001 14:12:14,611 ERROR JDBCExceptionReporter:101 - data exception: string data, right truncation 14:12:14,614 ERROR AbstractFlushingEventListener:324 - Could not synchronize database state with session org.hibernate.exception.DataException: could not update: [com.exp.model.ExpertiseArea#33BA7E09-3A79-4C9D-888B-4263314076AF] //Stack trace 14:12:14,615 DEBUG GenericDAO:87 - could not update: [com.exp.model.ExpertiseArea#33BA7E09-3A79-4C9D-888B-4263314076AF] 14:12:14,616 DEBUG JDBCTransaction:186 - rollback 14:12:14,616 DEBUG JDBCTransaction:197 - rolled back JDBC Connection That's expected behavior. However when I retrieve the persisted object to check if its name is still 100 characters long, the test fails. The way I see it, the retrieved object should have a name that is 100 characters long, given that the attempted update failed. The last assertion fails because the name is 110 characters long now, as if the ea instance was indeed updated. What am I doing wrong here?

    Read the article

  • Should I deal with files longer than MAX_PATH?

    - by John
    Just had an interesting case. My software reported back a failure caused by a path being longer than MAX_PATH. The path was just a plain old document in My Documents, e.g.: C:\Documents and Settings\Bill\Some Stupid FOlder Name\A really ridiculously long file thats really very very very..........very long.pdf Total length 269 characters (MAX_PATH==260). The user wasn't using a external hard drive or anything like that. This was a file on an Windows managed drive. So my question is this. Should I care? I'm not saying can I deal with the long paths, I'm asking should I. Yes I'm aware of the "\?\" unicode hack on some Win32 APIs, but it seems this hack is not without risk (as it's changing the behaviour of the way the APIs parse paths) and also isn't supported by all APIs . So anyway, let me just state my position/assertions: First presumably the only way the user was able to break this limit is if the app she used uses the special Unicode hack. It's a PDF file, so maybe the PDF tool she used uses this hack. I tried to reproduce this (by using the unicode hack) and experimented. What I found was that although the file appears in Explorer, I can do nothing with it. I can't open it, I can't choose "Properties" (Windows 7). Other common apps can't open the file (e.g. IE, Firefox, Notepad). Explorer will also not let me create files/dirs which are too long - it just refuses. Ditto for command line tool cmd.exe. So basically, one could look at it this way: a rouge tool has allowed the user to create a file which is not accessible by a lot of Windows (e.g. Explorer). I could take the view that I shouldn't have to deal with this. (As an aside, this isn't an vote of approval for a short max path length: I think 260 chars is a joke, I'm just saying that if Windows shell and some APIs can't handle 260 then why should I?). So, is this a fair view? Should I say "Not my problem"? Thanks! John

    Read the article

  • Python/Biophysics- Trying to code a simple stochastic simulation!

    - by user359597
    Hey guys- I'm trying to figure out what to make of the following code- this is not the clear, intuitive python I've been learning. Was it written in C or something then wrapped in a python fxn? The code I wrote (not shown) is using the same math, but I couldn't figure out how to write a conditional loop. If anyone could explain/decipher/clean this up, I'd be really appreciative. I mean- is this 'good' python- or does it look funky? I'm brand new to this- but it's like the order of the fxns is messed up? I understand Gillespie's- I've successfully coded several simpler simulations. So in a nutshell- good code-(pythonic)? order? c? improvements? am i being an idiot? The code shown is the 'answer,' to the following question from a biophysics text (petri-net not shown and honestly not necessary to understand problem): "In a programming language of your choice, implement Gillespie’s First Reaction Algorithm to study the temporal behaviour of the reaction A---B in which the transition from A to B can only take place if another compound, C, is present, and where C dynamically interconverts with D, as modelled in the Petri-net below. Assume that there are 100 molecules of A, 1 of C, and no B or D present at the start of the reaction. Set kAB to 0.1 s-1 and both kCD and kDC to 1.0 s-1. Simulate the behaviour of the system over 100 s." def sim(): # Set the rate constants for all transitions kAB = 0.1 kCD = 1.0 kDC = 1.0 # Set up the initial state A = 100 B = 0 C = 1 D = 0 # Set the start and end times t = 0.0 tEnd = 100.0 print "Time\t", "Transition\t", "A\t", "B\t", "C\t", "D" # Compute the first interval transition, interval = transitionData(A, B, C, D, kAB, kCD, kDC) # Loop until the end time is exceded or no transition can fire any more while t <= tEnd and transition >= 0: print t, '\t', transition, '\t', A, '\t', B, '\t', C, '\t', D t += interval if transition == 0: A -= 1 B += 1 if transition == 1: C -= 1 D += 1 if transition == 2: C += 1 D -= 1 transition, interval = transitionData(A, B, C, D, kAB, kCD, kDC) def transitionData(A, B, C, D, kAB, kCD, kDC): """ Returns nTransition, the number of the firing transition (0: A->B, 1: C->D, 2: D->C), and interval, the interval between the time of the previous transition and that of the current one. """ RAB = kAB * A * C RCD = kCD * C RDC = kDC * D dt = [-1.0, -1.0, -1.0] if RAB > 0.0: dt[0] = -math.log(1.0 - random.random())/RAB if RCD > 0.0: dt[1] = -math.log(1.0 - random.random())/RCD if RDC > 0.0: dt[2] = -math.log(1.0 - random.random())/RDC interval = 1e36 transition = -1 for n in range(len(dt)): if dt[n] > 0.0 and dt[n] < interval: interval = dt[n] transition = n return transition, interval if __name__ == '__main__': sim()

    Read the article

  • Can't connect in C# and google spreadsheet api

    - by RockySanders99
    Trying to access google spreadsheets using their api. following their example, the code doesnt work, and its not obvious why. All I'm trying to do is to connect, and I keep getting back the same error. This is with their code set as of 4/15/10. Can anyone offer any suggestion on what I'm doing wrong? CodE: using System; using Google.GData.Client; using Google.GData.Extensions; using Google.GData.Spreadsheets; namespace google_spreadsheet { class Program { static void Main(string[] args) { SpreadsheetsService myService = new SpreadsheetsService("MySpreadsheet" ); myService.setUserCredentials("[email protected]", "xxxxxxx"); string token1 = myService.QueryClientLoginToken(); Console.WriteLine("token is {0}", token1); Console.ReadLine(); SpreadsheetQuery query = new SpreadsheetQuery(); SpreadsheetFeed feed = myService.Query(query); Console.WriteLine("list"); foreach (SpreadsheetEntry entry in feed.Entries) { Console.WriteLine("Value: {0}", entry.Title.Text); When I run this, it keeps erroring out at the myService.Query statement, with the following error: Google.GData.Client.GDataRequestException was unhandled Message=Execution of request failed: http://spreadsheets.google.com/feeds/spreadsheets/private/full Source=Google.GData.Client ResponseString=<HTML> <HEAD> <TITLE>Not Found</TITLE> </HEAD> <BODY BGCOLOR="#FFFFFF" TEXT="#000000"> <H1>Not Found</H1> <H2>Error 404</H2> </BODY> </HTML> StackTrace: at Google.GData.Client.GDataRequest.Execute() at Google.GData.Client.GDataGAuthRequest.Execute(Int32 retryCounter) at Google.GData.Client.GDataGAuthRequest.Execute() at Google.GData.Client.Service.Query(Uri queryUri, DateTime ifModifiedSince, String etag, Int64& contentLength) at Google.GData.Client.Service.Query(Uri queryUri, DateTime ifModifiedSince) at Google.GData.Client.Service.Query(FeedQuery feedQuery) at Google.GData.Spreadsheets.SpreadsheetsService.Query(SpreadsheetQuery feedQuery) at google_spreadsheet.Program.Main(String[] args) in C:\Development Items\VS Projects\VS2008\google_spreadsheet\google_spreadsheet\Program.cs:line 21 at System.AppDomain._nExecuteAssembly(Assembly assembly, String[] args) at Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssembly() at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Threading.ThreadHelper.ThreadStart() InnerException: System.Net.WebException Message=The remote server returned an error: (404) Not Found. Source=System StackTrace: at System.Net.HttpWebRequest.GetResponse() at Google.GData.Client.GDataRequest.Execute() InnerException: Yet, I can take the url http://spreadsheets.google.com/feeds/spreadsheets/private/full and manually type it in with my username/password, and it works fine. Any suggestions? thanks rocky sanders

    Read the article

  • Setting UITableViewCell button image values during scrolling

    - by Rob
    I am having an issue where I am trying to save whether a repeat image will show selected or not (it is created as a UIButton on a UITableViewCell created in IB). The issue is that since the cell gets re-used randomly, the image gets reset or set somewhere else after you start scrolling. I've looked all over and the advice was to setup an NSMutableArray to store the button's selection state and I am doing that in an array called checkRepeatState My question is: where do I put the if-then-else statement in the code to where it will actually change the button image based on if the checkRepeatState is set to 0 or 1 for the given cell that is coming back into view? Right now, the if-then-else statement I am using has absolutely no effect on the button image when it comes into view. I'm very confused at this point. Thank you ahead of time for any insight you can give!!! My code is as follows: - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath { // set up the cell static NSString *CellIdentifier = @"PlayerCell"; PlayerCell *cell = (PlayerCell *)[tableView dequeueReusableCellWithIdentifier:CellIdentifier]; if (!cell) { [[NSBundle mainBundle] loadNibNamed:@"PlayerNibCells" owner:self options:nil]; cell = tmpCell; self.tmpCell = nil; NSLog(@"Creating a new cell"); } // Display dark and light background in alternate rows -- see tableView:willDisplayCell:forRowAtIndexPath:. cell.useDarkBackground = (indexPath.row % 2 == 0); // Configure the data for the cell. NSDictionary *dataItem = [soundCategories objectAtIndex:indexPath.row]; UILabel *label; label = (UILabel *)[cell viewWithTag:1]; label.text = [dataItem objectForKey:@"AnimalName"]; label = (UILabel *)[cell viewWithTag:2]; label.text = [dataItem objectForKey:@"Description"]; UIImageView *img; img = (UIImageView *)[cell viewWithTag:3]; img.image = [UIImage imageNamed:[dataItem objectForKey:@"Icon"]]; NSInteger row = indexPath.row; NSNumber *checkValue = [checkRepeatState objectAtIndex:row]; NSLog(@"checkValue is %d", [checkValue intValue]); // Reusing cell; make sure it has correct image based on checkRepeatState value UIButton *repeatbutton = (UIButton *)[cell viewWithTag:4]; if ([checkValue intValue] == 1) { NSLog(@"repeatbutton is selected"); [repeatbutton setImage:[UIImage imageNamed:@"repeatselected.png"] forState:UIControlStateSelected]; [repeatbutton setNeedsDisplay]; } else { NSLog(@"repeatbutton is NOT selected"); [repeatbutton setImage:[UIImage imageNamed:@"repeat.png"] forState:UIControlStateNormal]; [repeatbutton setNeedsDisplay]; } cell.accessoryType = UITableViewCellAccessoryNone; return cell; }

    Read the article

  • Best Practices / Patterns for Enterprise Protection/Remediation of SSNs (Social Security Numbers)

    - by Erik Neu
    I am interested in hearing about enterprise solutions for SSN handling. (I looked pretty hard for any pre-existing post on SO, including reviewing the terriffic SO automated "Related Questions" list, and did not find anything, so hopefully this is not a repeat.) First, I think it is important to enumerate the reasons systems/databases use SSNs: (note—these are reasons for de facto current state—I understand that many of them are not good reasons) Required for Interaction with External Entities. This is the most valid case—where external entities your system interfaces with require an SSN. This would typically be government, tax and financial. SSN is used to ensure system-wide uniqueness. SSN has become the default foreign key used internally within the enterprise, to perform cross-system joins. SSN is used for user authentication (e.g., log-on) The enterprise solution that seems optimum to me is to create a single SSN repository that is accessed by all applications needing to look up SSN info. This repository substitutes a globally unique, random 9-digit number (ASN) for the true SSN. I see many benefits to this approach. First of all, it is obviously highly backwards-compatible—all your systems "just" have to go through a major, synchronized, one-time data-cleansing exercise, where they replace the real SSN with the alternate ASN. Also, it is centralized, so it minimizes the scope for inspection and compliance. (Obviously, as a negative, it also creates a single point of failure.) This approach would solve issues 2 and 3, without ever requiring lookups to get the real SSN. For issue #1, authorized systems could provide an ASN, and be returned the real SSN. This would of course be done over secure connections, and the requesting systems would never persist the full SSN. Also, if the requesting system only needs the last 4 digits of the SSN, then that is all that would ever be passed. Issue #4 could be handled the same way as issue #1, though obviously the best thing would be to move away from having users supply an SSN for log-on. There are a couple of papers on this: UC Berkely: http://bit.ly/bdZPjQ Oracle Vault: bit.ly/cikbi1

    Read the article

  • .NET JIT Code Cache leaking?

    - by pitchfork
    We have a server component written in .Net 3.5. It runs as service on a Windows Server 2008 Standard Edition. It works great but after some time (days) we notice massive slowdowns and an increased working set. We expected some kind of memory leak and used WinDBG/SOS to analyze dumps of the process. Unfortunately the GC Heap doesn’t show any leak but we noticed that the JIT code heap has grown from 8MB after the start to more than 1GB after a few days. We don’t use any dynamic code generation techniques by our own. We use Linq2SQL which is known for dynamic code generation but we don’t know if it can cause such a problem. The main question is if there is any technique to analyze the dump and check where all this Host Code Heap blocks that are shown in the WinDBG dumps come from? [Update] In the mean time we did some more analysis and had Linq2SQL as probable suspect, especially since we do not use precompiled queries. The following example program creates exactly the same behaviour where more and more Host Code Heap blocks are created over time. using System; using System.Linq; using System.Threading; namespace LinqStressTest { class Program { static void Main(string[] args) { for (int i = 0; i < 100; ++ i) ThreadPool.QueueUserWorkItem(Worker); while(runs < 1000000) { Thread.Sleep(5000); } } static void Worker(object state) { for (int i = 0; i < 50; ++i) { using (var ctx = new DataClasses1DataContext()) { long id = rnd.Next(); var x = ctx.AccountNucleusInfos.Where(an => an.Account.SimPlayers.First().Id == id).SingleOrDefault(); } } var localruns = Interlocked.Add(ref runs, 1); System.Console.WriteLine("Action: " + localruns); ThreadPool.QueueUserWorkItem(Worker); } static Random rnd = new Random(); static long runs = 0; } } When we replace the Linq query with a precompiled one, the problem seems to disappear.

    Read the article

  • Forms bound to updateable ADO recordsets are not updateable when the source includes a JOIN

    - by Art
    I'm developing an application in Access 2007. It uses an .accdb front end connecting to an SQL Server 2005 backend. I use forms that are bound to ADO recordsets at runtime. For the sake of efficiency, the recordsets usually contain only one record, and are queried out on the server: Public Sub SetUpFormRecordset(cn As ADODB.Connection, rstIn As ADODB.Recordset, rstSource As String) Dim cmd As ADODB.Command Dim I As Long Set cmd = New ADODB.Command cn.Errors.Clear ' Recordsets based on command object Execute method are Read Only! With cmd Set .ActiveConnection = cn .CommandType = adCmdText .CommandText = rstSource End With With rstIn .CursorType = adOpenKeyset .LockType = adLockPessimistic 'Check the locktype after opening; optimistic locking is worthless on a bound End With ' form, and ADO might open optimistically without firing an error! rstIn.Open cmd, , adOpenKeyset, adLockPessimistic 'This should run the query on the server and return an updatable recordset With cn If .Errors.Count <> 0 Then For Each errADO In .Errors Call HandleADOErrors(.Errors(I)) I = I + 1 Next errADO End If End With End Sub rstSource (the string containg the TSQL on which the recordset is based) is assembled by the calling routine, in this case from the Open event of the form being bound: Private Sub Form_Open(Cancel As Integer) Dim rst As ADODB.Recordset Dim strSource As String, DefaultSource as String Dim lngID As Long lngID = Forms!MyParent.CurrentID strSource = "SELECT TOP (100) PERCENT dbo.Customers.CustomerID, dbo.Customers.LegacyID, dbo.Customers.Active, dbo.Customers.TypeID, dbo.Customers.Category, " & _ "dbo.Customers.Source, dbo.Customers.CustomerName, dbo.Customers.CustAddrID, dbo.Customers.Email, dbo.Customers.TaxExempt, dbo.Customers.SalesTaxCode, " & _ "dbo.Customers.SalesTax2Code, dbo.Customers.CreditLimit, dbo.Customers.CreationDate, dbo.Customers.FirstOrder, dbo.Customers.LastOrder, " & _ "dbo.Customers.nOrders, dbo.Customers.Concurrency, dbo.Customers.LegacyLN, dbo.Addresses.AddrType, dbo.Addresses.AddrLine1, dbo.Addresses.AddrLine2, " & _ "dbo.Addresses.City, dbo.Addresses.State, dbo.Addresses.Country, dbo.Addresses.PostalCode, dbo.Addresses.PhoneLandline, dbo.Addresses.Concurrency " & _ "FROM dbo.Customers INNER JOIN " & _ "dbo.Addresses ON dbo.Customers.CustAddrID = dbo.Addresses.AddrID " strSource = strSource & "WHERE dbo.Customers.CustomerID= " & lngID With Me 'Default is Set up for editing one record If Not Nz(.RecordSource, vbNullString) = vbNullString Then If .Dirty Then .Dirty = False 'Save any changes on the form .RecordSource = vbNullString End If If rst Is Nothing Then 'Might not be first time through DefaultSource = .RecordSource Else rst.Close Set rst = Nothing End If End With Set rst = New ADODB.Recordset Call setupformrecordset(dbconn, rst, strSource) 'dbconn is a global variable With Me Set .Recordset = rst End With End Sub The recordset that is returned from setupformrecordset is fully updateable, and its .Supports property shows this. It can be edited and updated in code. The entire form, however, is read only, even though it's .AllowEdits and .AllowAdditions properties are both true. Even the fields from the right hand side (the 'many' side) cannot be edited. Removing the INNER JOIN clause from the TSQL (restricting strSource to one table) makes the form fully editable. I've verified that the TSQL includes priimary key fields from both tables, and each table includes a timestamp field for concurrency. I tried changing the .CursorType and .CursorLocation properties of the recordset to no avail. What am I doing wrong?

    Read the article

  • Socket in C: recv overwrite a char[]

    - by Possa
    Hi all, I'm trying to make a little client-server script like many others that I've done in the past. But in this one I have a problem. It is better if I post the code and the output it give me. Code: #include <mysql.h> //not important now #include <stdlib.h> #include <sys/types.h> #include <sys/socket.h> #include <netinet/in.h> #include <arpa/inet.h> #include <netdb.h> #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <signal.h> #include <string.h> //constant definition #define SERVER_PORT 2121 #define LINESIZE 21 //global var definition char victim_ip[LINESIZE], file_write[LINESIZE], hacker_ip[LINESIZE]; //function void leggi (int); //not use now for debugging purpose //void scriviDB (); //not important now main () { int sock, client_len, fd; struct sockaddr_in server, client; // transport end point if((sock = socket(AF_INET, SOCK_STREAM, 0)) == -1) { perror("system call socket fail"); exit(1); } server.sin_family = AF_INET; server.sin_addr.s_addr = inet_addr("10.10.10.1"); server.sin_port = htons(SERVER_PORT); // binding address at transport end point if (bind(sock, (struct sockaddr *)&server, sizeof server) == -1) { perror("system call bind fail"); exit(1); } //fprintf(stderr, "Server open: listening.\n"); listen(sock, 5); /* managae client connection */ while (1) { client_len = sizeof(client); if ((fd = accept(sock, (struct sockaddr *)&client, &client_len)) < 0) { perror("accepting connection"); exit(1); } strcpy(hacker_ip, inet_ntoa(client.sin_addr)); printf("1 %s\n", hacker_ip); //debugging purpose //leggi(fd); ////////////////////////// //receive client recv(fd, victim_ip, LINESIZE, 0); victim_ip[sizeof(victim_ip)] = '\0'; printf("2 %s\n", hacker_ip); //debugging purpose recv(fd, file_write, LINESIZE, 0); file_write[sizeof(file_write)] = '\0'; printf("3 %s\n", hacker_ip); //debugging purpose printf("%s@%s for %s\n", file_write, victim_ip, hacker_ip); //send to client send(fd, hacker_ip, 40, 0); //now is hacker_ip for debug ///////////////////////// close(fd); }//end while exit(0); } //end main Client send string: ./send -i 10.10.10.4 -f filename.ext so the script send -i (IP) and -f (FILE) at the server. Here's my output server side: 1 10.10.10.6 2 10.10.10.6 3 [email protected] for As you can see the printf(3) and the printf(ip,file,ip) fail. I don't know how and where but someone overwrite my hacker_ip string. Thanks for your help! :)

    Read the article

< Previous Page | 559 560 561 562 563 564 565 566 567 568 569 570  | Next Page >