Search Results

Search found 29197 results on 1168 pages for 'oracle mysql training'.

Page 563/1168 | < Previous Page | 559 560 561 562 563 564 565 566 567 568 569 570  | Next Page >

  • Accidently overwrote system.dbf - What now?

    - by Filip Ekberg
    I accidentally overwrote system.dbf in /usr/lib/oracle/xe/oradata/XE/system.dbf Well I did not actually do it accidentally, however I overwrote it because of other failures in the database. And when I try running the following: SQL> shutdown ORA-01109: database not open Database dismounted. ORACLE instance shut down. SQL> startup ORACLE instance started. Total System Global Area 289406976 bytes Fixed Size 1258488 bytes Variable Size 92277768 bytes Database Buffers 192937984 bytes Redo Buffers 2932736 bytes Database mounted. ORA-01589: must use RESETLOGS or NORESETLOGS option for database open Now I want to try to Recover the database because starting it in mounted or standard surely doesn't work. SQL> recover database using backup controlfile; ORA-00283: recovery session canceled due to errors ORA-01110: data file 1: '/usr/lib/oracle/xe/oradata/XE/system.dbf' ORA-01122: database file 1 failed verification check ORA-01110: data file 1: '/usr/lib/oracle/xe/oradata/XE/system.dbf' ORA-01206: file is not part of this database - wrong database id How do I solve this? Is it even possible? My "real" problem was that I ran the /etc/init.d/oracle-xe configure and it overwrote my old configuration and probably removed passwords and such so my tables were gone, however I found the mytablespace.dbf so I hope that it is possible to recover? Please shed some light on this.

    Read the article

  • Server Performance

    - by sb12
    I know very little about performance tuning of servers etc... so i thought i'd put this up here as i start some research on it, just to get some direction. I am in the process of migrating from my old server to a new one - both are 64 bit machines. One is a few years old, the other brand new (PowerEdge R410). The old server spec is: 2 cpus, 3.4GHz Pentiums, 8G of RAM, Fedora 11 currently installed The new server spec is: 16 cpus, 3.2 GHz Xeon, 16G of RAM, CentOS 6.2 installed. Also RAID10 is on the new server - no RAID on the old one. Both servers currently have the same database (MySQL) with the same data migrated. I wrote a Perl script that simply steps through each row of a table in the database (about 18000 rows) and updates a value in that row. Every row in the table is updated. Out of curiosity i ran this perl script on both machines, just to see how the new server would perform vs. the old one, and it produced interesting results: The old server was twice as fast as the new one to complete. Looking at the database, both are configured exactly the same (the new one being a dump of the old one...)... Anyone any ideas why this would be given the hardware gap between both? As i said i'm about to start some digging, but thought i'd put this up here to maybe get some good direction.... Many thanks in advance..

    Read the article

  • PHP scripts randomly becoming really slow to respond - Database lockup?

    - by webnoob
    Hi All, I wasn't sure whether to post this here or on stackoverflow, so apologies if its in the wrong place. I have about 7 php scripts running on a centOS VPS. Each of these scripts contacts a game server and processes the logs, with the logs it either does some database queries or sends info back to the game server. I am having an issue where some of the scripts will randomly become REALLY slow to respond and I don't know where to start with my debugging. Each script connects to its own database schema but on the same MySQL server. Each script will do about 4 inserts per second and twice as many select statements on their respective databases. I thought a database lockup may cause the issue but some console messages that are read from the database are sent to the game servers console without issue every 30 seconds, even when the script is slow to responding to other commands. Non of the scripts are using a lot of memory or CPU power. About 0.1% each. I know this information is really vague but I don't know linux very well at all (in fact, top is about my limit) and I really don't know where to start debugging this. Thanks.

    Read the article

  • ownCloud WebDAV interface seems to be broken

    - by Nobleleader13245
    I've been trying to host ownCloud on my server but everytime I try to it tells me this : Your web server is not yet properly setup to allow files synchronization because the WebDAV interface seems to be broken. Please double check the installation guides. This is my setup : Windows Server 2012 R2 IIS 8.5 PHP 5.5.11 ownCloud 6.0.3 MySQL 5.6.17 I tried google the error but I can't seem to find anything usefull. Some say I should try if this works : https://cloud.mcsoftworks.net/remote.php/webdav/ and yes I can navigate to this folder and I can open files from there. The calendar works and I can also just upload files from here https://cloud.mcsoftworks.net/ the only thing that doesn't seem to work is the sync client. The sync client doesn't say anything it just doesn't connect (Screenshot : http://prntscr.com/3p2apz) This is the error log : Warning core isWebDAVWorking: NO - Reason: [CURL] Error while making request: Could not resolve host: cloud.mcsoftworks.net (error code: 6) (Sabre_DAV_Exception) 2014-06-02T19:56:00+00:00 Warning core isWebDAVWorking: NO - Reason: [CURL] Error while making request: Could not resolve host: cloud.mcsoftworks.net (error code: 6) (Sabre_DAV_Exception) 2014-06-02T19:55:47+00:00 Warning core isWebDAVWorking: NO - Reason: [CURL] Error while making request: Could not resolve host: cloud.mcsoftworks.net (error code: 6) (Sabre_DAV_Exception) 2014-06-02T19:55:34+00:00 Warning core isWebDAVWorking: NO - Reason: [CURL] Error while making request: Could not resolve host: cloud.mcsoftworks.net (error code: 6) (Sabre_DAV_Exception) 2014-06-02T19:55:34+00:00 Fatal webdav Sabre_DAV_Exception_Forbidden: Path does not exist, or escaping from the base path was detected 2014-06-02T19:54:37+00:00 Fatal webdav Sabre_DAV_Exception_Forbidden: Path does not exist, or escaping from the base path was detected 2014-06-02T19:54:36+00:00 Fatal webdav Sabre_DAV_Exception_Forbidden: Path does not exist, or escaping from the base path was detected 2014-06-02T19:54:36+00:00 Fatal webdav Sabre_DAV_Exception_Forbidden: Path does not exist, or escaping from the base path was detected 2014-06-02T19:54:36+00:00 Warning core isWebDAVWorking: NO - Reason: [CURL] Error while making request: Could not resolve host: cloud.mcsoftworks.net (error code: 6) (Sabre_DAV_Exception) 2014-06-02T19:51:24+00:00 This is my php.ini : http://pastebin.com/es3MB8Uh Does anyone have any idea on how I should get this to work? I've been trying to get this to work for about 14 days now and it starts to annoy me =P

    Read the article

  • Problems starting autossh on boot [ubuntu]

    - by Ken
    I'm trying to automatically start an SSH tunnel to my server on boot from a ubuntu box. I have an ubuntu box that's mounted on an 18-wheeler and is networked behind an air card. The box hosts a mysql database that i'm trying to have replicated when the aircard is connected. As I can never be sure of my IP and how many or which routers I'm behind I'm connected to my replication server with an SSH tunnel. I got that working using the following command: ssh -R 3307:localhost:3307 [email protected] Now I'd like that to start whenever the box is, and be alive all the time, so I installed auto-ssh and setup this little script: ID=xkenneth HOST=erdosmiller.com AUTOSSH_POLL=15 AUTOSSH_PORT=20000 AUTOSSH_GATETIME=30 AUTOSSH_DEBUG=yes AUTOSSH_PATH=/usr/bin/ssh export AUTOSSH_POLL AUTOSSH_DEBUG AUTOSSH_PATH AUTOSSH_GATETIME AUTOSSH_PORT autossh -2 -fN -M 20000 -R 3307:localhost:3306 ${ID}@${HOST} I've tried putting this scrip in /etc/init.d/ and using a post-up command in /etc/network/interfaces as well as putting it in /etc/network/if-up.d/. In both situations the script starts on boot, but the tunnel doesn't appear to be correctly established. The script works when run manually.

    Read the article

  • dotConnect LINQ to MySQL Issue

    - by Saravanan I M
    I am using dotConnect LINQ to MySQL and i have the following error. what would be the cause for this issue annot convert parameter value of type 'System.String' to MySQL type 'MySqlType.TimeStamp'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.InvalidCastException: Cannot convert parameter value of type 'System.String' to MySQL type 'MySqlType.TimeStamp'. Source Error: Line 93: { Line 94: string loginLowered = login.ToLower(); Line 95: return context.ISVs.Where(u = u.Email == loginLowered).SingleOrDefault() == null; Line 96: Line 97: }

    Read the article

  • McAfee Virus Scan and Oracle RAC

    - by Lee Gathercole
    Hi, We're experiencing a strange problem with Oracle RAC and McAfee anti-virus. As part of the installation of the Oracle RAC we disable anti virus as directed. We have had our RAC running fine, but when we came to re-enable the AV and reboot we got the BSOD. Abnormal Program Termination (BugCheck, STOP: 0x00000035 (0x8E984678, 0x00000000, 0x00000000, 0x00000000 NO_MORE_IRP_STACK_LOCATIONS Following the standard process of raising this problem with Microsoft they identify the problem and also a fix. Microsoft talk about too many file filter drivers being present and pushing the DFS upper limit beyond the default size. Upping this value, as per msdn, has no impact. We're able to recover from this BSOD by disabling AV. We don't have the problem if we run the AV service manually whilst the system is up. However, if we make the service automatic we fail to boot. Tech Details 2 Node Oracle 10g Cluster 2 * Windows 2003 SP2, 16GB RAM, Quad Core 3ghz Processor SAN attached storage McAfee VirusScan Enterprise 8.5.0i, Scan Engine (5300.2777), DAT Version (5536.0000) Thanks Lee

    Read the article

  • Reversed Latitude/Longitude US Tiger/Line Shape File to MySQL w/ OGR2OGRP

    - by Dave LeJeune
    Hi - I've downloaded the latest set (2010) of TIGER edge shape files (ESRI shapefile format) from the US Census website and am loading them into MySQL using the GDAL ogr2ogr utility. A new table (geotest) does get created with a SHAPE column that has the geometry defined as a LINESTRING. However, I am seeing reversed latitude and longitude values that get reversed when running the following command: ogr2ogr -f "MySQL" MySQL:"geo,user=lejeuned,host=localhost,password=cnickl234" -nln geotest -nlt LINESTRING -append -a_srs "EPSG:4326" -lco engine=MYISAM tl_2010_01021_edges.shp Mapping the latitude/longitude (after reversing them of course) they appear to be spot on so I suspect there is just something I am doing wrong or flag I am missing which is causing the latitude and longitudes to be transposed. When I select the SHAPE column using astext() I get the following result: LINESTRING(-86.69863 32.973164,-86.69853 32.97302,-86.69856 32.97287,-86.698613 32.972825,-86.6988 32.972825,-86.6989 32.972892,-86.6989 32.973002,-86.69874 32.97316,-86.69864 32.97318,-86.69863 32.973164) Any ideas what I am doing wrong?

    Read the article

  • Dedicated server automatic backup solution

    - by Luigi
    I have a dedicated Ubuntu web server in a cloud environment, and I am looking for a nice way to do automated backups. I would like to backup some directories with web apps, and all my MySql databases. As for destination: make snapshots every two hours localy, and every six hours to a remote ftp server. Also delete backup archives older than seven days(localy + ftp), and notify on any problems by email. Now to achieve some of this functionality I use cron + shell script, and http://www.mysqldumper.net/, but really that doesn't answer my needs. Mysqldumper doesn't know automaticly about new databases, and shell script does not notify on problems. It's something I have to check out from time to time, and i don't have trust for. I googled a while, and seems like most people solve this stuff with shell scripts. Is this a method you can trust? Are there any web-gui tools, I'm missing? Maybe there is a smarter startegy for doing this? I'm a little bit confused.

    Read the article

  • Redmine plug-in fails at rake db:migrate_plugins

    - by Drew
    Hey, First post, so hope I'm in the right place. While trying to install the Redmine plug-in 'Wiki Extensions', I keep getting stuck when I try to run the "rake db:migrate_plugins RAILS_ENV=production" command. I am moving server and I'm in bit over my head. Haven't found anything on Google that has helped me much, though I might have missed something. I have pasted in the output with --trace: (in /srv/www/vastpark.org/redmine) ** Invoke db:migrate_plugins (first_time) ** Invoke environment (first_time) ** Execute environment ** Execute db:migrate_plugins Migrating engines... Migrating acts_as_activity_provider... Migrating acts_as_attachable... Migrating acts_as_customizable... Migrating acts_as_event... Migrating acts_as_list... Migrating acts_as_searchable... Migrating acts_as_tree... Migrating acts_as_versioned... Migrating acts_as_watchable... Migrating awesome_nested_set... Migrating classic_pagination... Migrating coderay-0.9.2... Migrating gravatar... Migrating open_id_authentication... Migrating prepend_engine_views... Migrating redmine_wiki_extensions... == CreateWikiExtensionsComments: migrating =================================== -- create_table(:wiki_extensions_comments) rake aborted! An error has occurred, all later migrations canceled: Mysql::Error: Table 'wiki_extensions_comments' already exists: CREATE TABLE 'wiki_extensions_comments' ('id' int(11) DEFAULT NULL auto_increment PRIMARY KEY, 'wiki_page_id' int(11), 'key_word' varchar(255), 'user_id' int(11), 'comment' text, 'created_at' datetime, 'updated_at' datetime) ENGINE=InnoDB

    Read the article

  • Apache crashes every 5min

    - by Simon
    I'm relatively new to server issues, having a site of mine that I started early in the year grow beyond my capabilities of managing it. I need help. I recently moved out of my shared hosting environment onto a dedicated virtual server from Mediatemple. Each week, I run a script that fetches data from my DB, fetches data from last.fm's API and then tweets information to Twitter. My server uses Virtuozzo and when the script runs, Apache crashes every 5min. I checked and saw that the 'kmemsize' parameter reaches its cap (its 13mb). I realise my problem. The MySQL process stays open for long while Apache needs to handle lots of incoming links (about 200 000 pageviews for that day according to my previous host's AWSTATS). Yes, I'm quite unexperienced in this, and I'm clearly killing the server with too many incoming links while it has to manage the updating of the DB. So that is the precedent: I want a few answers. 1) Why did my shared hosting environment not crash apache every 5min? It ran fine, the site only slowed a lot. Clearly, it must be the virtual container and the kmemsize limit? 2) Where do I go from here? Would a physical server (not a virtual container) encounter the same problems? I sent a support request to Mediatemple as well. I need all the help I can get.

    Read the article

  • How to connect to Oracle 10g server from client machines

    - by Tareq
    I have installed Oracle 10g in one of my office's computer. I want to keep this as database server. I am developing a .net project which will communicate with the database server from client machine and from the server machine. I success to communicate with oracle from server machine but not from client machine using the .net project. The connection code is as follows: Public OraConn As ADODB.Connection OraConn = New ADODB.Connection OraConn.Provider = "OraOLEDB.Oracle" OraConn.ConnectionString = "Data Source=<my_database_name>;User ID=<my_user>;Password=<my_pass>;" OraConn.Open() Please tell me step by step procedures how can I connect to my server database from my .net client program resides on client machine ? Thanks in Advance.

    Read the article

  • Webserver python update script

    - by ThePyCoder
    So i have made this website on which you can trade stocks based on real stock quotes with virtual money. The stock quotes are in a MySQL database and are updated using a python script which runs every minute or so. Now, this works fine on my local machine with xampp but how about moving the project to a commercial web server? Basically I want my page hosted by a professional company but do those kind of servers support python scripts running in the background? Because a dedicated server would be to expensive and the script does some other sql tasks too so it can't be replaced by PHP or so... So, are there any good web hosting services out there who give me the possibility of running a script in the background and hosting a website in the foreground? For what server specifications do i have to look for? Thnx in advance! PS: I've done some research, and I found a python supporting web host WITH ssh support. Is that what I need? Or is the ssh not allowed to start processes?

    Read the article

  • A few tables are still out of sync after running mk-table-sync

    - by smusumeche
    I have 1 master and 2 slaves. I am using MySQL 5.1.42 on all servers. I am attempting to use mk-table-checksum to verify that their data is in sync, but I am getting unexpected results on one of the slaves. First, I generate the checksums on the master like this: mk-table-checksum h=localhost --databases MYDB --tables {$table_list} --replicate=MYDB.mk_checksum --chunk-size=10M My understanding is that this runs the checksum queries on the master which then propagate via normal replication to the slaves. So, no locking is needed because the slaves will be at the same logical point in time when they run the checksum queries on themselves. Is this correct? Next, to verify that the checksums match, I run this on the master: mk-table-checksum --databases MYDB --replicate=IRC.mk_checksum --replicate-check 1 h=localhost,u=maatkit,p=xxxx If there are any differences, I repair the slaves like this: mk-table-sync --execute --verbose --replicate IRC.mk_checksum h=localhost,u=maatkit,p=xxxx After doing all of this, I repaired both slaves with mk-table-sync. However, everytime I run this sequence (after everything has already been repaired), one slave is perfectly in sync but one slave always has a few tables out of sync. I am 99.999% sure that the data on the slaves matches, since I repaired everything and the tables were not even updated on the master between runs of the checksum script. What would cause a few tables to always show out of sync on only one of the slaves? I am stuck. Here is the output: Differences on h=x.x.x.x,p=...,u=maatkit DB TBL CHUNK CNT_DIFF CRC_DIFF BOUNDARIES IRC product 10 0 1 product_id = 147377 AND product_id < 162085 IRC post_order_survey 0 0 1 1=1 IRC mk_heartbeat 0 0 1 1=1 IRC mailing_list 0 0 1 1=1 IRC honey_pot_log 0 0 1 1=1 IRC product 12 0 1 product_id = 176793 AND product_id < 191501 IRC product 18 0 1 product_id = 265041 IRC orders 26 0 1 order_id = 694472 IRC orders_product 6 0 1 op_id = 935375

    Read the article

  • Server Recovery from Denial of Service

    - by JMC
    I'm looking at a server that might be misconfigured to handle Denial of Service. The database was knocked offline after the attack, and was unable to restart itself after it failed to restart when the attack subsided. Details of the Attack: The Attacker either intentionally or unintentionally sent 1000's of search queries using the applications search query url within a couple of seconds. It looks like the server was overwhelmed and it caused the database to log this message: Server Specs: 1.5GB of dedicated memory Are there any obvious mis-configurations here that I'm missing? **mysql.log** 121118 20:28:54 mysqld_safe Number of processes running now: 0 121118 20:28:54 mysqld_safe mysqld restarted 121118 20:28:55 [Warning] option 'slow_query_log': boolean value '/var/log/mysqld.slow.log' wasn't recognized. Set to OFF. 121118 20:28:55 [Note] Plugin 'FEDERATED' is disabled. 121118 20:28:55 InnoDB: The InnoDB memory heap is disabled 121118 20:28:55 InnoDB: Mutexes and rw_locks use GCC atomic builtins 121118 20:28:55 InnoDB: Compressed tables use zlib 1.2.3 121118 20:28:55 InnoDB: Using Linux native AIO 121118 20:28:55 InnoDB: Initializing buffer pool, size = 512.0M InnoDB: mmap(549453824 bytes) failed; errno 12 121118 20:28:55 InnoDB: Completed initialization of buffer pool 121118 20:28:55 InnoDB: Fatal error: cannot allocate memory for the buffer pool 121118 20:28:55 [ERROR] Plugin 'InnoDB' init function returned error. 121118 20:28:55 [ERROR] Plugin 'InnoDB' registration as a STORAGE ENGINE failed. 121118 20:28:55 [ERROR] Unknown/unsupported storage engine: InnoDB 121118 20:28:55 [ERROR] Aborting **ulimit -a** core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited scheduling priority (-e) 0 file size (blocks, -f) unlimited pending signals (-i) 13089 max locked memory (kbytes, -l) 64 max memory size (kbytes, -m) unlimited open files (-n) 1024 pipe size (512 bytes, -p) 8 POSIX message queues (bytes, -q) 819200 real-time priority (-r) 0 stack size (kbytes, -s) 8192 cpu time (seconds, -t) unlimited max user processes (-u) 1024 virtual memory (kbytes, -v) unlimited file locks (-x) unlimited **httpd.conf** StartServers 10 MinSpareServers 8 MaxSpareServers 12 ServerLimit 256 MaxClients 256 MaxRequestsPerChild 4000 **my.cnf** innodb_buffer_pool_size=512M # Increase Innodb Thread Concurrency = 2 * [numberofCPUs] + 2 innodb_thread_concurrency=4 # Set Table Cache table_cache=512 # Set Query Cache_Size query_cache_size=64M query_cache_limit=2M # A sort buffer is used for optimizing sorting sort_buffer_size=8M # Log slow queries slow_query_log=/var/log/mysqld.slow.log long_query_time=2 #performance_tweak join_buffer_size=2M **php.ini** memory_limit = 128M post_max_size = 8M

    Read the article

  • mysqldump skip one table

    - by danneth
    I'm running a cronjob to backup our system using mysqldump. The database contains 90 or so tables. One of these tables is HUGE and every once in a while causes the dump to fail. From the manual I see that you can specify specific tables to dump shell> mysqldump [options] db_name [tbl_name ...] This got me thinking. What if I have two jobs, one for dumping the huge table, and one for all the others. To accomplish this it would be nice if I could to something like shell> mysqldump -u backupuser -p database huge_table > db_huge_table.sql shell> mysqldump -u backupuser -p database --skip huge_table > db_rest.sql Unfortenately I'm not seeing such and option. I could of course explicitly state the 90 tables, but that just seems like a mess. Another option would be a script of some sort, but before checking that route I'll try this resource. MySQL is 5.1.61 on CentOS 6.2

    Read the article

  • Server configration for our website [duplicate]

    - by Varun Varunesh
    This question already has an answer here: Can you help me with my capacity planning? 2 answers We are a start-up and 6 month back we have launched our beta version website. Now we are in a phase of building our website and web-services for the final product. This website will be based on PHP, Python, MySql database and with wamp server. Right now in the beta version we are using Azure VM for hosting, with configuration of 786MB RAM and Shared CPU. We have 200 avg users daily coming to our website. Now we are trying to increase the number of users from 200 to 1500 daily users. And I am thinking our server should have capability to handle at least 100 concurrent user. Also we have developed web-services for our mobile-apps. Which can also increase loads on the sever. So here are the question that takes me here, I am pretty much confused about whether to go with shared hosting or VM based hosting. If VM, then what configuration will be best for our requirement (as I discussed above) ? Currently our VM is a Windows based server and its very simple to manage, So other than cost factor why should I go for Linux based sever? What other factor should I keep in mind while choosing the server as per our requirement ?

    Read the article

  • Web Hosting: Any web host that supports files more than 50,000 in number?

    - by Devner
    Hi all, For my PHP & mySQL based application, I am trying to buy website hosting from a host who does not have a limit on the number of files I carry in my hosting account. Almost all the websites have a common limit of 50,000 files (some websites call it 50,000 nodes). The rest(to the extent of my search) are not even close. I have gone through the various websites, Googled lot of information, have spoken with the customer service of the hosting companies and they said that they have a limit of 50,000 files and that's why they call it the LIMIT. Now I have my application, which is a kind of social networking website, where people can upload various files of varying file size. So say if 50,000 users were to join the website and upload 1 file each, the limit of 50,000 will be reached very easily and my 50,001 customer will start facing file upload problems (& so will my account). So I would like to know if there's any website hosting services that do NOT levy such restrictions. In summary, I need the following options: No maximum file limit (more than 50,000 files in account). No maximum file upload limit in server setting (10MB, 12MB, 15MB, 20MB, etc.). Ability to upload files of various types (zip, flv, jg, png, etc.). Ability to stream Audio and Video (live audio & video not necessary). Access to .htaccess Access to php.ini, my.cnf or my.ini (this would be a plus) Supports SSL. Provides dedicated hosting(& IP) as well. Monthly payments without contracts are a plus. If you know of any such website hosting services, please post a reply ( a link to the same will be appreciated ). Thank you.

    Read the article

  • Developing high-performance and scalable zend framework website [on hold]

    - by Daniel
    We are going to develop an ads website like http://www.gumtree.com/ (it will not be like this one but just to give you an ideea) and we are having some issues regarding performance and scalability. We are planning on using Zend Framework for this project but this is all that I'm sure off at this point. I don't think a classic approch like Zend Framework (PHP) + MySQL + Memcache + jQuery (and I would throw Doctrine 2 in there to) will fix result in a high-performance application. I was thinking on making this a RESTful application (with Zend Framework) + NGINX (or maybe MongoDB) + Memcache (or eAccelerator -- I understand this will create problems with scalability on multiple servers) + jQuery or maybe throw Backbone.js in there, a CDN for static content, a server for images and a scalable server for the requests and the rest. My questions are: - What do you think about my approch? - What solutions would you recommand for developing an high performance, scalable application expected to have a lot of traffic using PHP(Zend Framework 2)...I would be interested in your approch. I should note that I'm a Zend developer, I'm working with Zend for over 3 years, this is why I'm choosing it.

    Read the article

  • choosing hosting for custom ecommerce site, shared, dedicated, what to look for?

    - by spirytus
    Hi, I have (almost) developed website for my client and now need to decide on hosting. Most of the users of the site will be located in Australia, and so am I and my client. Now, I want to consider everything before deciding on host and few questions comes to my mind: I cannot afford website being down, and all hosts say something like "99% uptime guranted". Should just that be enough or shall I ask hosts for some stats maybe? Does it make any difference if servers and whole hosting company is located in Australia or outside? I've been hosting few sites with JustHost.com on shared hosting (cheapest plan, servers in US I believe) and never seen any delays but could that be an issue? I would prefer Australian company so I can actually go to them and give them piece of my mind if something goes wrong, but US servers seem cheaper. Would share hosting do? Its ecommerce custom build php application, I know there are security issues with sessions etc on shared hosting. Will take precautions of course but could share hosting be an issue? Would dedicated be worthy option considering that my knowledge of server is very limited? I need to run php/mysql, with preferably unlimited bandwidth as with my experience I cannot tell what amount of traffic would be sufficient. Please let me know if I didn't provide you with enough information so you could answer my questions, will gladly explain further. In advance thanks for any answers :)

    Read the article

  • High-performance Academic Server [closed]

    - by PHPsmith
    Suppose I want to build a server for the university's academic interests. The server is dedicated only to a site, where users (students and lecturers) just view and fill the academic data. But at a time (e.g. once a semester), about 12,000 students will access the site simultaneously. Due to limitation of resources, I have to build the server using free software (except for the operating system Windows 7, the university has been prepared). The hardware is also limited to the usual 4-core computers (eg, Ivy Bridge Intel Core i7-3770) with approximately 16GB of memory (DDR3 1600 MHz), equipped with an RJ-45 port (Intel 82 579 Gigabit Ethernet). With all these limitations, I have to choose the software (web server, database, etc) are appropriate for this purpose is achieved. I decided to create a site in PHP. Please help me by answering the following questions based on your expertise. (my prime candidate software to consider after googling) Web server which is faster & stable & secure, when implemented and optimized for PHP? And why? (nginx) PHP accelerator which is faster & stable & compatible with the selected web server? And why? (APC with Zend Optimizer+) Database which is faster & stable & secure, when implemented and optimized for selected web server and selected PHP accelerator? (MySQL) Are there any errors that have been or will be happening from my condition is? If there is, please enlighten me? Is there anything else I need to know in order to achieve this goal? If there is, please enlighten me? I understand that the performance also depends on the implementation of source-code program, so I assume it will create a site with the best efficiency (e.g. using AJAX).

    Read the article

  • Multivalue Mysql Inserts using HibernateTemplate

    - by Langali
    I am using Spring HibernateTemplate and need to insert hundreds of records into a mysql database every second. Not sure what is the most performant way of doing it, but I am trying to see how the multi value mysql inserts do using hibernate. String query = "insert into user(age, name, birth_date) values(24, 'Joe', '2010-05-19 14:33:14'), (25, 'Joe1', '2010-05-19 14:33:14')" getHibernateTemplate().execute(new HibernateCallback(){ public Object doInHibernate(Session session) throws HibernateException, SQLException { return session.createSQLQuery(query).executeUpdate(); } }); But I get this error: 'could not execute native bulk manipulation query.' Please check your query ..... Any idea of I can use a multi value mysql insert using Hibernate? or is my query incorrect? Any other ways that I can improve the performance? I did try the saveOrUpdateAll() method, and that wasn't good enough!

    Read the article

  • Why is my server performance degrading to the point of stopping, periodically?

    - by Pascal Aschwanden
    So, once in a while, I see in firebug that a request takes over 15 or even 60 seconds to respond and sometimes never. Here is what I've ruled out: It's not the CPU, cuz every time I check the Server load its less then 6 for all 3 numbers It's not the memory, because thats fairly low too, less the 50% It's not the I/O anymore, because I've seen the graphs that Joyent sent back to me when I requested them, and they show less then 3MB of I/O (mostly all read). It's not the SQL performance - I've profiled every last SQL command that runs, and they're all (99.9% of them anyway) running in less then 30ms, most run in less then 5ms. Oh and I've been profiling all the script execution times, and even the when the problem occurs, the script always manages to finish in 50ms or less (that's 1 / 20th of a second ). Now, I do run alot of ajax calls. 1 every 2 seconds per user and I have 300 DAU+. But, even if all 300 are playing simultaneously, thats still only 150 calls per second max. The only other thing I can think of is that one of my neighbors is funky. The problem is highly intermittent. 99% of the time it works perfectly and there's excellent performance. but 99%+ is not good enough. Eventually the performance gets so bad I have to restart the server, at which point everything is fine again. I've done this about 4 times now. Any ideas? Note: this is on joyent, vps, intro package 256mb of ram with bursting. here are the mysql dump info: Traffic ø per hour Received 18 MiB 29 MiB Sent 134 MiB 221 MiB Total 151 MiB 251 MiB Connections ø per hour % max. concurrent connections 5 --- --- Failed attempts 0 0.00 0.00% Aborted 0 0.00 0.00% Total 9,418 15.59 k 100.00%

    Read the article

  • mysqldump --where with = operator doesn't get all rows = - Help!

    - by JonathanLIVE
    I have a situation with a particular table that now thinks it contains 4 Petabytes of data. I know that sounds cool, but I assure you, it is only on a 60GB partition. This table has 9 fields in it. One of them is a domain_id field. It is the best field to identify the rows by, as there are only approximately 6300 of them. The only other field option to match has over 2million records, and thats just more difficult. I cannot do a straight mysqldump because it will attempt to output all 4PB of data and fill the drive long before it gets close to that, so I need to surgically remove the good stuff, destroy the db, and recreate it. I believe if I can do a dump for each domain_id record, then I will get most of the usable data out of it. This is what I am trying to use: mysqldump -u root --skip-opt -q --no-create-info --skip-add-drop-table --max_allowed_packet=1000000000 database table --where="domain_id=10" domains10.sql Using this I expect every row with the domain_id 10 to be exported. However, when I check the export, I am only getting 1 row, when however I look at the db, there are many many rows. It is as though the operator just finds one, then gives up. I have tried various operators. Using the < or I am able to get more of the data, but the export stops short at certain rows where the data has been compromised. With over 6000 to go through, I can't narrow down which rows are being affected in the export easily enough. So, what I need is an operator that will basically do what I thought = would do, simply give me an export of all records that match the specific field. Also note, the only way I got this DB even accessible is through an innodb force recovery 3. So I need to get this right, because after this is done, I have to drop the db in order to make mysql functional again. Looking forward to any helpful answers.

    Read the article

  • Good Hosting Providers With Zend Framework Support [closed]

    - by manyxcxi
    I currently use ixwebhosting for my hosting services. They're cheap and work (most of the time). The databases are horribly slow, the servers are horribly slow, and their support (though usually prompt) is tough to deal with. That being said, they're cheap, I've got like 20 domains hosted in my account, none of them are high volume, and they work JUST good enough- until today. This isn't meant to be a condemnation of ixwh though. Their prices are very low for what they do offer and most things work just fine, most of the time. I need to be able to host web apps written with Zend Framework in a fairly easy fashion. The server performance can't be worse than what I've already had (a pretty low hurdle to clear), and I don't want to spend $30/mo. These are not money making websites- they're projects. My requirements are PHP 5.3, ZF support, MySQL databases, multiple domains- not much. Who should I look at, and who should I look out for?

    Read the article

< Previous Page | 559 560 561 562 563 564 565 566 567 568 569 570  | Next Page >