Search Results

Search found 45957 results on 1839 pages for 'super sonic'.

Page 567/1839 | < Previous Page | 563 564 565 566 567 568 569 570 571 572 573 574  | Next Page >

  • PC powers off at random times

    - by Timo Huovinen
    Short Version After experiencing some problems with Mobo batteries my PC started to power off at random times, the power off is instant and sudden and does not restart afterwards, need help figuring out the cause. Facts: Powers off when PC is playing games Powers off when PC is idle Powers off when PC is in safe mode Powers off when PC is in BIOS Powers off when PC is booted through a Windows installation USB Replaced the motherboard battery several times Replaced the 650W PSU with a 750W PSU Replaced the RAM Swapped the RAM between slots Re-applied thermal paste to the CPU Checked if the motherboard touches the case Nothing is overclocked PC Specs PC specs: OS: Windows 7 Ultimate SP1 RAM: klingston 1333MHz 4GB stick CPU: AMD Phenom II x4 955 Mobo: Gigabyte 88GMA-UD2H rev 2.2 Motherboard battery: CR2032 3v HDD: 500GB Seagate ST3500418AS ATA Device Graphics: ATI/AMD Radeon HD 6870 Very Long version Around 10 months ago I built a brand new gaming PC. Around 6 months ago it's time setting in windows started resetting to the year 2010. I swapped the Motherboard battery for a new one of the exact same size and shape and voltage, and the problems disappeared...for around 2 weeks. Then the same problem happened again, time gets reset, I swapped the battery again, and the problem was gone for good and everything was great for about 3 months.. then another problem started happening, the PC started to power off suddenly and without warning at completely random times, sometimes the PC works for and hour, sometimes 5 minutes. So I read on the forums that it might be either the PSU or the motherboard Battery or RAM or HDD or the Graphics card or the CPU or the motherboard or the drivers or a Virus or Grounding issues, or something short circuiting, basically it can be anything... I spent some days researching, and decided to remove the possibility of a virus. I reset the CMOS, cleared all BIOS settings and reinstalled windows 7 after a full format of the HDD, but the random power off kept happening. I then disabled the restart on error option in windows and looked at the event log for error events, but they did not help me figure out the problem. Network list service depends on network location awareness the dependency group failed to start Source Kernel Power Event 41 Task Category 63 Source Disk Event ID 11 Task Category None The driver detected a controller error on device disk I took apart the PC, every little piece, re-applied some expensive thermal paste to the CPU, and double checked that none of the pieces are touching the PC case. The problem was gone, the PC no longer powered off randomly I re-attached the graphics card and all was good for 4 months... then the power off problem appeared again, but was happening at high intervals, the PC would shutdown once in 2 days on average, at random points in time, sometimes when it's idle all day long, sometimes when it's running CRYSIS 2. I checked the CPU temperature, because I know that AMD CPU's have a built in protection mechanism that switches off the PC if the CPU gets too hot, and the Temp was 50C system temp, and 45C CPU after running the PC all day long (I did not do tests to see if there are any temperature spikes, don't know how to do them) Originally the PSU that powered the PC was 650Watts and had one 4 pin cable to power the CPU, I replaced it with a new 750Watts PSU which has two 4 pin cables for the CPU, but the problem remained. I removed the graphics card and let the motherboard use the built in one, but the PC kept suddenly powering off at random times. I took apart the PC completely again, and re-applied thermal paste to the CPU, added lots of insulation, and checked for any type of short-circuit possibility again and again, but the problem remained. The problem was like that for some months. I replaced the Battery a couple of times over the time, changed lots of options in windows, and tried everything I could, but it kept powering off, so I stopped using the PC as much as I used to, just living with the random power offs from time to time, until a couple of days ago, when the power off happens almost immediately after powering on the PC. I replaced the RAM with a brand new one, but that did not help. Took apart the PC again, checked for anything anywhere that might cause it, found some small scratches on the very edge of the motherboard to the left of the PCI express x16 slot. This might cause the problem, I thought, but the scratch looks very superficial, not deep at all, and if the scratch did harm the motherboard, wouldn't it cause it to not start at all? And why did it start to power off a while ago, and then suddenly stop powering off? The scratches could not have vanished??? did chkdsk \d but it powered off when it was at 75% I removed the hard disks, the graphics card, while I fiddled with the BIOS settings, and suddenly the PC shut down while I was looking at the BIOS version. This makes me realize, it is not caused by: HDD, Windows, Drivers or the Graphics card I cleared the CMOS again, updated the BIOS from F5 to F6f beta, but that did not help, it might even seem that the PC powers off even sooner. The shutdown even happened to me while I booted through a windows 7 installation USB and was in the repair console. I removed one of the cables powering the CPU, now only one 4pin cable powers it, and it worked for 30mins after doing that, which makes me think that it's the CPU overheating, and because it gets less power, it overheats slower? The things that I am still considering: CPU overheating (does not seem to overheat, maybe false readings?) Motherboard short circuiting (faulty motherboard?) I desperately need some advice in what is faulty, is it a faulty Motherboard or an overheating CPU? or maybe something else? I have been breaking my head over this problem over a span of 6 months. I'm not sure if this is a good place to ask this question, if it is not, then tell me where I can get some experienced help. More info I have also discovered a mysterious piece that seems to have fallen out of the motherboard i119.photobucket.com/albums/o126/yurikolovsky/strangepiece.jpg What is it? Looks like each time that it powers off the datetime gets reset I also found another forum post tomshardware.co.uk/forum/… except I don't have Integrated PeripheralsUSB Keyboard Function option in BIOS :S Comments summary (asked by Random moderator) Q. tell me, if the computer restarts, is it immediately? Does it take a second and then restarts? Do you see (BSOD) or hear (PSU, short circuit) any suspicious when it happens? After reading trough it, it remains the mainboard that is faulty. – JohannesM A. Immediate power off, all the fans stop instantly, all the light turn off instantly, no sound or anything, and it remains off until I turn it back on. Thanks for the feedback, faulty motherboard is what I fear. Q. Try stress-testing the system with Prime95 and see if errors or shutdowns occur when the CPU is under full load. – speakr A. Prime95 heat stress test peaked CPU heat at 60C after 5mins, it powered off after 30mins of testing in the middle of the test with no errors, Prime95 Heat test or the stress-testing with low RAM usage (small or in-place FFTs) do not report errors while testing for 10-60 mins. The power off does not seem like it is affected by Prime95 at all Makes me wonder if it's a CPU or Motherboard issue at all. Q. I had similar random/intermittent problems with my old board. It gave one of a few different symptoms: keyboard and/or mouse would die and/or the RAM wouldn't work and/or it would shut down. It was in bad shape. One problems was that my old PSU had literally burned the connector on it (browned around the pins), another was that a broken lead inside the layers of the PCB would work sometimes if it happened to be hot or if I bent the board—by jamming a hunk of wood behind it. I managed to keep the board alive for several years, but eventually nothing I did would make it work correctly anymore. – Synetech A. I will try that as the last resort, ok? ;) Q. Have you tried a different power cord, surge protector, outlet (on a different circuit). It's worth a shot just to ensure it's not subpar wiring or a week circuit (dips in power may cause shutdown if the PSU can't pull enough juice from the wall). – Kyle A. yes, I attached the PC to an entirely different outlet on a different circuit and the problem persists. After connecting it to a different outlet after starting the PC it gave me 3 long beeps and 1 short one, then the PC immediately proceeded to boot up normally. Q. Re-check your mainboard manual and all PSU connections to your mainboard to be sure that nothing is missing (e.g. 12V ATX 4-pin/6-pin connector). If you can provoke shutdowns with Prime95, then consider buying new hardware -- a stable system should run Prime95 for 24h without any errors. Prime95 mentions errors in the log when they occur and gives a summary after the stress test was stopped manually (e.g. "0 errors, 0 warnings", if all is fine) – speakr A. Re-checked, there are no more PSU connectors that I can physically connect, except the one ATX 4-pin (there are 2 that power the CPU) that I disconnected on purpose, I have reconnected it but the problem persists. Q. With one PC I had a short curcuit. The power button on the front plate had its cables soldered, but not isolated, and the contacts were very close to the metal case. A heavier touch was enough to cause a shutdown. The PC's vibration could be enough – ott-- A. yes, it seems to switch off with even the lightest touch, I switched on the PC, then pulled out the front panel power cable that connects to the motherboard so the power button does not work anymore, after 5 mins of working like that, with the power button completely disconnected, just sitting idle, the PC powered off again, I don't think it's the power button. Q. I wonder if you dare to operate components without the case, that is remove motherboard, power, disk ( just put the motherboard on a wooden desk). Don't bend the adapters when running like that. – ott-- A. yes, I do dare to do that, but only tomorrow, too tired/late right now.

    Read the article

  • Office for Mac 2008 suspicious behaviour

    - by Chinmay Kanchi
    Office for Mac 2008 just asked me whether I wanted to update. However, on continuing with the update, a Window popped up saying that I needed to close Chrome before the update could continue. I find this rather suspicious, since Office should not need to go anywhere near Chrome. Any idea why there might be a legitimate reason for this, or alternatively, just what is Microsoft trying to sneak on to my computer? EDIT: I did look at the download details on Microsoft's website, but aside from the general guff about closing all open applications, it doesn't mention anything about Chrome or any browser plugins.

    Read the article

  • svn .xcodeproj conflict / transaction issue?

    - by Stephen Furlani
    Hello, I am trying to add my xcodeproj file/folder thingy to my svn repository. medwall-macmini-1:Summer2010 pebble$ svn add CoreDataTrial.xcodeproj A CoreDataTrial.xcodeproj A CoreDataTrial.xcodeproj/pebble.pbxuser A CoreDataTrial.xcodeproj/pebble.perspectivev3 A CoreDataTrial.xcodeproj/project.pbxproj A CoreDataTrial.xcodeproj/slate.mode1v3 A CoreDataTrial.xcodeproj/slate.mode2v3 A CoreDataTrial.xcodeproj/slate.pbxuser A CoreDataTrial.xcodeproj/slate.perspectivev3 medwall-macmini-1:Summer2010 pebble$ svn ci -m "Checked In" Adding CoreDataTrial.xcodeproj svn: Commit failed (details follow): svn: File already exists: filesystem '/SVN/Summer2010/db', transaction '21-p', path '/CoreDataTrial.xcodeproj' I then try to Delete it, Check-In, Update it, Add it, and then check it in again but I get the same exact run-around. What can I do to fix this? -Stephen

    Read the article

  • HP DX5150, MS-7050 v. 1.3 Motherboard front panel pin connectors

    - by Daniel
    I recently purchased and installed a MS-7050 v. 1.3 motherboard into a regular non-HP case and thus the front panel connectors are different than the original OEM connectors which are all bundled together. The HP support website does not have this information available and someone from HP indicated in response to a support forum question that this information is not available. What is the motherboard pin schematic for the front panel i/o connectors (power, reset, hdd led, and power led)?

    Read the article

  • Rendering Machine Configuration [closed]

    - by user1184598
    I would like to buy a computer for Rendering purpose. The Rendering is based on DirectX in Windows 7. It needed to support multi-thread rendering which is highly demanding (around 20 threads doing rendering and connection to MS SQL Server job simultaneously). Could I have some suggestion on the configuration of the computer? e.g. what kind of CPU, GPU, Mother Board should be used? The budget is around US$1000. Thank you very much.

    Read the article

  • Adding value of cell X only if cell Y is blank

    - by Graeme Hutchison
    I have a list with three columns A, B, and C. The first two columns are complete (A and B), while the third (C) has many blanked fields. What I want to do is replace all the blank fields in Column C with the same value form cell A in the same row. The List contains over 2000 records, of which 65% have a blank Column C value, so I would like to use a formula/function. Below is an example of what I have and what I want to do (on a much smaller scale)

    Read the article

  • Remove Write Protection from USB

    - by Vasile Marian Falama?
    My flash USB is write protected and I've tried every possible methods I've encountered over the internet, to get rid of this. Accessing the usb is not working. Format from my computer, is not working. Clear attributes with DiskPart is not working (can't be cleaned, Current Read-only State is Yes but Readonly is set to false... With Disk Management, I can't delete the partition... Is there any other method... With a specific software or somehow? Edit : I tried this on Windows 8.1.

    Read the article

  • Starting airplay from command line, to send output of 'Say' Mac OS X command to airplay

    - by Fabien
    Ok, Sunday question :) Trying to make a little joke... 1) if you open a terminal, and type "say -a ?", Mac OS X will give you the list of devices it can send spoken words to. On mine, it says: 39 AirPlay 47 Built-in Output 2) I have a Denon airplay-ready received in my living room and I'm trying to send spoken words to my wife downstairs... I can send music without any problem using iTunes so, from an infrastructure standpoint, I'm all set. 3) I want my computer to say (out of the blue) "Honey, why don't you bring me a cup of coffee". I can make it say that locally on my internal laptop speakers, but I can't seem to send that to device 39 successfully. I am suspecting that there are a few other things that need to be setup before it works, i.e. setting up airplay output to "denon", maybe opening a channel and reserving it. I don't know. Has anyone played with this? Is there a way to setup airplay from the command line? That would be awesome :)

    Read the article

  • overriding new ubuntu installation

    - by tkoomzaaskz
    I've got a ubuntu 11.10 which has lost its support in May 2013, now I'd like to reintall up to the most up-to-date LTS, which is 12.04. My question is regarding my current partitions and doing backups. Is there a safe way to backup my data on some local partitions instead of copying files into DVDs/external drives (this is very uncormortable in my situation). Following are system commands shoing my disk: $ lsblk NAME MAJ:MIN RM SIZE RO MOUNTPOINT sda 8:0 0 232,9G 0 +-sda1 8:1 0 48,8G 0 +-sda2 8:2 0 63G 0 +-sda3 8:3 0 1K 0 +-sda4 8:4 0 53,7G 0 / +-sda5 8:5 0 18,6G 0 +-sda6 8:6 0 25,5G 0 +-sda7 8:7 0 23,3G 0 [SWAP] sr0 11:0 1 1024M 0 and $ sudo fdisk -l [sudo] password for xyz: Disk /dev/sda: 250.1 GB, 250059350016 bytes glowic: 255, sektorów/sciezke: 63, cylindrów: 30401, w sumie sektorów: 488397168 Jednostka = sektorów, czyli 1 * 512 = 512 bajtów Rozmiar sektora (logiczny/fizyczny) w bajtach: 512 / 512 Rozmiar we/wy (minimalny/optymalny) w bajtach: 512 / 512 Identyfikator dysku: 0xc3ffc3ff Device Boot Beginning End Blocks ID System /dev/sda1 * 2048 102402047 51200000 7 HPFS/NTFS/exFAT /dev/sda2 215044096 347080703 66018304 7 HPFS/NTFS/exFAT /dev/sda3 347082750 488392064 70654657+ 5 Extended /dev/sda4 102402048 215042047 56320000 83 Linux /dev/sda5 395905923 434975939 19535008+ 83 Linux /dev/sda6 434976003 488392064 26708031 83 Linux /dev/sda7 347082752 395905023 24411136 82 Linux swap / Solaris In the beginning I had Windows Vista pre-installed with the machine when it was bought (damn!) and I installed linux (the one I have now). The windows-program in master boot record has been overriden by grub and now I can boot with both Windows and Linux. This is list of mounted devices: $ mount /dev/sda4 on / type ext4 (rw,errors=remount-ro,commit=0) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) fusectl on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev) gvfs-fuse-daemon on /home/tomasz/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=tomasz) It's strange (I don't remember such thing) that my current linux uses only one partition (/dev/sda4). But, anyway, it seems like that. My final question is: am I able to use one of the existing linux partitions for a backup and install ubuntu 12.04 without removing neither windows nor ubuntu 11.04? I mean - will grub automatically accept both old windows vista and 2 linuxes (old 11.10 and "new" 12.04)? Is there any hidden operation done while installation that could harm my custom-backup-partition while installing? my fstab file: proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda4 during installation UUID=d44e89f5-9da2-48eb-83b3-887652ec95d2 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda7 during installation UUID=bbe50535-ba57-434a-9272-211d859f0e00 none swap sw 0 0 sda5 and sda6 are trash partitions created during unsuccessful linux installation (this was linux installation before my current installation), I didn't delete these partitions, but I have access to them (and I can use them as backup partitions). edit: second question is: why does lsblk show /dev/sda having 232,9G while fdisk shows that it has 250.1GB? Where does the difference come from?

    Read the article

  • Return cell reference as result of if statement with vlookups.

    - by EMJ
    I have two sets of data in excel. One contains a set of data which represents the initial step of a process. The other set of data represents the additional steps which take place after the first step is completed. Each of the data records in the "additional step data" has an id in a column. I need to find the identifying codes of the "additional step data" which correspond with the initial step data records. The problem is that I have to match the data in 4 columns between the two data sets and return the id of the "additional step data". I started by doing a combination of an if and vlookup functions, but I got stuck when I tried to figure out how to get the if statement to reference the id of the matching "additional step data". Basically I am trying to avoid having to search by manually filtering between two sets of data and finding corresponding records. Does anyone have any idea about how to do this?

    Read the article

  • Laptop with internal serial port in 2009 (and 2010)

    - by Vincent Demeester
    Are there any computer vendors (like Dell, Lenovo, or..) that still sell laptops with an internal serial port? We are using several modem and other kind of box at work that have to be used (and/or programmed) with serial port (RS232, DB9, ..). We tried many usb/pcmcia serial adapter which run fine when used to load programs on the boxes but not with modems. The protocol behind the RTC connection (with modem) need timer we are not able to reach when using an adapter (maybe until we find a very good adapter), and that leads to my question..

    Read the article

  • Disabling file permissions on NFS share

    - by user41377
    I am trying to set up a nfs share for use by non-technical users, and really don't want file permissions messing things up. Everyone should be able to read/write anything on this share without even knowing what file permissions are, much less adjusting them. Is there a way I can just make the nfs server write everything as 770 or something? It seems like this should be easy, but the best I can come up with is a cronjob to periodically set them to that, which is far from ideal. The server is a Netgear ReadyNAS. Ideally I would like to stick to doing stuff from within the web interface on it, but I can just root it if needed.

    Read the article

  • Two Routers - 1 Port Straight to First Router

    - by apples
    At my house we have two Wifi routers one's connected directly to the modem and the other is plugged in down stairs as a second network(Directly connected to the first router) Is there a way that I could make it so that I have the second router have its own network, but have one or two ports that would act as if they were directly connected to the first router? That way I can port forward to devices on the second router. Here are the information about the routers: Router 1 - Linksys WRT54G Running stock firmware Router 2 - Linksys E900 Running Tomato Firmware So to summarize what I'm asking is how would I have two networks from two routers but be able to connect directly to the first router through one of the ports on the second router. Here's a Visio Drawing of what I would like to look like

    Read the article

  • Why are the analoge stereo input and output of my M-Audio 24/96 soundcard not available to me in Ubu

    - by user37968
    I have installed Lucid on an old Mac PowerPC G4 desktop with a M-Audio Audiophile 24/96 soundcard. The only inputs and outputs I can select in the audio preferences are digital ones for the digital input and output. "lspci -v" shows the card as so: 0001:10:13.0 Multimedia audio controller: VIA Technologies Inc. ICE1712 [Envy24] PCI Multi-Channel I/O Controller (rev 02) Subsystem: VIA Technologies Inc. Device d634 Flags: bus master, medium devsel, latency 16, IRQ 53 I/O ports at 0440 [size=32] I/O ports at 04b0 [size=16] I/O ports at 04a0 [size=16] I/O ports at 0400 [size=64] Capabilities: <access denied> Kernel driver in use: ICE1712 Kernel modules: snd-ice1712 "cat /proc/asound/cards" as so: 0 [Tumbler ]: PMac Tumbler - PowerMac Tumbler PowerMac Tumbler (Dev 21) Sub-frame 0 1 [M2496 ]: ICE1712 - M Audio Audiophile 24/96 M Audio Audiophile 24/96 at 0x440, irq 53 "aplay -L" shows these as listed: pulse Playback/recording through the PulseAudio sound server front:CARD=Tumbler,DEV=0 PowerMac Tumbler, PowerMac Tumbler Front speakers front:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi Front speakers surround40:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 4.0 Surround output to Front and Rear speakers surround41:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi 5.1 Surround output to Front, Center, Rear and Subwoofer speakers iec958:CARD=M2496,DEV=0 M Audio Audiophile 24/96, ICE1712 multi IEC958 (S/PDIF) Digital Audio Output I believe it is a problem with detecting the analogue input/output. Sometimes I can get sound from the device but it is a sheet of white noise and tinkering makes it go away again I don't know if that is a separate problem or if it is linked to not being able to see the analogue input/outputs in the sound preferences. Any help would be greatly appreciated As for the white noise I have installed the Envy24 control panel and spend lots of time playing with the settings but when I can get the white noise I can never get it to an quality where I can actually hear what is being played. The internal speaker plays audio fine and plugging in a NI Audio 4DJ via usb also plays sound, although with some static but I believe that is due to an underpowered usb2 pci expansion card not being able to get enough electricity to the device. Alternatively I have seen other people with problems with this device so it may be a bug in the driver but that is another matter. I would like to get the M-Audio card working so I can begin to enjoy my music once again. As a note, I do not currently have any audio equipment capable of sending or receiving audio via the digital inputs and output so I can not check if they are working. The sound preferences show a wide range of digital in and out options with various surround sound options but no analogue ins and outs.

    Read the article

  • How to write to a Mac OSX read-only filesystem?

    - by marienbad
    I have DMG I need to mount and write a file to. When I mount it, finder shows the root and all as read-only. Then I discovered 'mount -w'. But when I run that, I get 'mount: unknown special file or file system.' How can I mount this disk image as writable, or force a file into it?

    Read the article

  • How can I permanently fix my date synchronize problem in linux?

    - by gr33d
    Ubuntu 7.10 server i386 clock/date/time won't stay in sync. Are their log files I can view to tell when the clock changes? For a temporary fix, I created a file in /etc/cron.hourly: #!/bin/sh ntpdate time.nist.gov However, this still leaves a potential hour of unchecked time. Is there a cron.minutely? That would still leave a potential minute of unchecked time. I have read about CMOS battery problems, but what if this does not fix it? I'd like to be able to troubleshoot this as a completely software problem. My squid logs are showing dates back in 2005 when the clock changes, and my time-sensitive access controls are skewed and end up allowing users to surf prohibited websites during business hours.

    Read the article

  • Running SUN UDS 5213 on Windows 7

    - by Lebo
    I am getting this error when I try to install Sun ONE UDS 5213 on Windows 7: This Windows NT system does not have TCP/IP installed. Please install the TCP/IP package before installing Sun ONE UDS Please help.

    Read the article

  • Any software to do minute by minute backup ?

    - by Ranhiru
    Of all the freeware backup programs i've checked out, the most frequent backup i could do automatically was every hour :( Is there any freeware out there that can backup my data every minute or so? :) I'm talking about a few mega bytes of VERY important data... Preferably over the LAN backup too :)

    Read the article

  • Installing VS2010 components with SP1 beta

    - by Jesus Rodriguez
    Hello, I hope this is the place for this kind of question. I have VS2010 ult with the Service Pack 1 beta installed. I want to play with F# and I need to install it. The problem is that because I have the SP1 installed, the VS DVD can't install the F# compiler. I click on add new feature, I click on F#, the installer says: "A selected drive is not longer valid. Please review your installation path settings before continuing with setup." Of course the path is correct and I can't change it anyway... I think that problem is because I have the SP1. I had the same problem in the past with VS2008 + SP1. What can I do? Uninstalling VS2010 is not an option, it take ages. Thank you.

    Read the article

  • nxclient crashes when trying to open a terminal from a remote client through "ssh -Y"

    - by user167328
    I support around 150 linux machines. I have 2 virtual machines on an ESXi server which I access via nxmachine v3 from a windows 7 box. These machines run CentOS5 with KDE and Lubuntu12.04.1 and they are the admin GUIs from which I support the 150 machines. The linux machines which I manage are redhat4/5, CentOS5 and ubuntu 10 and 12. Normally I contact the machines via ssh -Y. Today I did an ssh -Y to a remote machine which is running Ubuntu 12.10 and ssh 6.0p1. Then I tried to open an lxterminal on the remote machine which should display on my KDE desktop. This immediately and reproducably crashed my nxclient session. I tried again from my lubuntu system with the same effect. I have not observed the phenomenon from other machines yet. The message log on my KDE host shows: Unexpected termination of nxagent because of signal: 11 Logger::log nxnode 3920 Googling for this revealed no usable answer. Does anybody have a clue what is going on here or can give a hint how to solve the issue? Add On: I asked the user at the remote machine to export his DISPLAY to my host and open an lxterminal. This worked without problems i. e. the nxclient did not crash. Then the user tried to send me xeyes and this also killed the nxclient with the same error message found in the message log as above. This makes me suspect that the problem is not solely connected to ssh but maybe to some library stuff.

    Read the article

  • Where does Windows 8 put the exe of the default browser for Modern UI?

    - by avirk
    I was trying to some hack with Win-8 and I found something which is really gonna out my mind. When I set the default browser to the IE then its icon become Modern UI and I can't see the option Open file location at the bottom when I select it by right click. But if I don't set it default then it became a desktop version icon and show up the option when I select it. Same is for the Google Chrome when I checked it. IE icon when it is not set to default, I can see the option open file location. Google Chrome icon when it is set to default. Google Chrome of desktop version when it is set to default. So my question is where does Modern UI keep exe of the default browser? And why the default browser has Modern UI icon and non-default browser has desktop version icon.

    Read the article

< Previous Page | 563 564 565 566 567 568 569 570 571 572 573 574  | Next Page >