Search Results

Search found 20351 results on 815 pages for 'chrome os'.

Page 568/815 | < Previous Page | 564 565 566 567 568 569 570 571 572 573 574 575  | Next Page >

• Replacing notebook SATA hard disk with SSD without reinstalling

  - by Graeme Donaldson

  So there's a notebook (Lenovo Thinkpad Z61m) with a SATA hard disk, the SATA controller is configured for native AHCI operation & the OS is Windows XP. The hard disk is going to be replaced with an SSD which is larger. I have an idea of how I'm going to do this, but I want to be sure there isn't something obvious I'm missing. Connect external USB drive Boot some flavour of Linux live CD Use dd to clone the SATA disk to the external drive Power off and replace the SATA disk with the SSD Boot the live CD Use dd to clone back from the external drive to the SSD Does anyone have anything to add?

  Read the article

• Worth it to move /var to physical disk vs logical?

  - by Tammer Ibrahim

  Brief question about partition layout. I use an SSD for /, /boot, /usr, & /home partitions. I'd like to move /var to a mechanical disk to minimize writes to the SSD. I'm mainly concerned about maximizing drive life rather than maximizing performance (although I obviously wouldn't want to cripple my server). My mechanical disks consist of two drives sharing LVM, and a third used for nightly rsync backups. I also have a bunch of old 2.5in hard disks lying around. My question is, should I simply create a new LVM volume '/var' on my primary data store, or would it be worth the increased energy consumption (in terms of maximizing the lifetime of the LVMed drives) to install a low volume 2.5in disk to use just for /var? On a more general level my question is about the trade offs of placing OS mounts on the same physical volumes as my data. Thanks for any help!

  Read the article

• How do I usb tether my Cyanogen modded G1's internet connection to my Toshiba Tecra 8000 running Xub

  - by atticus

  I have usb-tethering enabled in my phone. It works fine with Vista. When I plug my phone into my Tecra 8000 laptop running Xubuntu, dmesg shows: "usb 1-1: new full speed USB device using uhci_hcd and address 8". I see that the OS has detected it as a storage device, but I can't get it to function correctly as a network device. /dev/us* shows no usb0, but it does show /dev/usbdev1.1_ep00 /dev/usbdev1.1_ep81 /dev/usbdev1.8_ep00 ... usbdev1.8_ep83.

  Read the article

• How to take a screenshot on Windows 7 and auto create screenshot file on desktop like Mac?

  - by Ali

  I'm trying to find information how do we take a screenshot on Windows 7 that will actually create a screenshot file like .png in to your desktop like on mac where you can do it by press Command+Control+Shift+4. In windows all I know is that I can do it by press press = Windows captures the entire screen and copies it to the clipboard. or for the Active windows I can just do hold and press = Windows captures only the currently active window and copies it to the clipboard. Right now I'm using maComFort which it gives me functionality of Mac like keyboard that I can take screenshot in such the same way with Mac OS X but really it changes many of the key in my keyboard in the way I don't like. So I wonder if there is a better way?

  Read the article

• How to install anti-virus without administrative rights?

  - by Rohit

  In situations where the PC has no CD drive and operating a guest account with limited privileges, how to install an anti-virus tool? Malware is not permitting to open any anti-virus vendor's site and also blocking all sites opened via Google that contain the term "online scan". I somehow managed to download through mirror links with a Download Manager as the browser's download was blocked by the malware. But the problem didn't end there. After I downloaded the anti-virus tool, it failed to install because it needed administrative rights. The user didn't know the administrator password. I tried via command line with runas, but it also asks for the administrator password. The OS is Windows XP. How to deal with these type of malwares if there is a scenario that CD drive is not there only Internet is there?

  Read the article

• Cannot find the "Create Network" menuitem in the WiFi icon menu in Mountain Lion

  - by Chuancong

  I am using Mountain Lion Developer Preview 2. I cannot find the "Create Network" menuitem in the WiFi icon menu in the menubar. It was there before when I was using Lion. It started missing since I upgraded to Mountain Lion Developer Preview 1. By the way, is there any other method to create an ad-hoc WiFi network on OS X? I tried to use Internet Sharing via WiFi, but other devices using the shared connection could not find the Mac in their local networks. I am using an early 2011 MacBook Pro 15'. Thanks.

  Read the article

• bash process uses 90% CPU, comes back on computer restart

  - by Sano

  I’ve replaced the old HDD of my late 2008 unibody MacBook (8 GB of RAM, running OS X 10.7.4) with an OCZ Vertex 3 SSD. After doing this, I've installed Lion and restored my data from a Time Machine backup. Everything is fine, except for a process named “bash” that permanently uses about 90 % CPU. If I kill it via Activity Monitor, everything goes back to normal, but unfortunately the process comes back every time I restart the computer. I've tried do zap the PRAM, reinstall 10.7.4 from the combo package, and even simply wait for more than 2 hours, but the problem is still here.

  Read the article

• Citrix ICA Client on Mac shift key doesn't work as expected.

  - by brianegge

  When I'm connected to a Windows XP computer from my Mac OS X 10.6 using the Citrix ICA Client, it seems that the shift key only works for the first letter typed after pressing shift. In order to type multiple uppercase letters, like ICA, I must either press caps lock, or press and release shift before each character. I've tried switching between standard and enhanced keyboard, as well as the 'Send Special Keys Unchanged' option, but none of these seem to affect the issue. The problem doesn't occur when I switch from the Citrix window to a regular Mac window.

  Read the article

• Daily Weekly and Monthly DB backup with logrotate?

  - by benjisail

  Hi, I am currently keeping daily backup of my database by doing a daily mysqldump and by using logrotate to keep the 7 last days of mysqldump. I would like to improve this backup process to keep 7 daily backup, 3 weekly backups and 12 monthly backup. I found this article which explain how to di this with logrotate : http://www.hotcoding.com/os/sysadmin/35751.html However I am using the dateext logrotate option to name my backup files so I cannot use this solution. How can I do daily, weekly and monthly backup with logrotate and with the dateext option?

  Read the article

• Getting BootMgr not found errors repeatedly on Win7 x64

  - by abszero

  So here is the basic configuration of the box: Primary RAID 1 (Mirror, Bootable): 2x 300GB WD SATA drives AMD Phenom Quad Core x64 @2.2 ASUS M3N78 Pro Board 4GB RAM Win 7 Ultimate Additionally, this box is a Host OS for several CentOS Boxes via VirtualBox. The box runs like a champ but, for whatever reason, everytime I restart the machine I get a BootMgr not found error when the box tries to boot. I pop in my Win DVD, select 'Repair Windows' then 'Fix Start Up Problems' and everything works fine...once. When I restart the box again I have to go back through this process. Any ideas on what is going on?

  Read the article

• Recover Time Machine partition that turned MBR only instead of GUID

  - by alex

  I have one drive that has a NTFS partition, a TimeMachine partition (I guess HFS+) and empty space. The other day, I did one partition more from Windows 8 (bootcamp) and since then, I can't see the TimeMachine one from OSX, I can see it from Windows though. The problem is that TimeMachine uses a file system that Windows cannot browse, only shows some folders and I need to recover this partition because I have to use it to backup my Mac. On OSX I can only see the NTFS partition and the other one appears unmounted and it's impossible to mount. I've come to the conclusion that something has happened to the partition table. With TestDisk it shows that it's MBR only when I think it should be GUID: And pressing p shows that it's FDisk_partition_scheme and the TimeMachine one appears as Windows_NTFS. I found this thread that is similar to what it's happening to me: Adding NTFS partition to disk in Windows makes HFS+ partition on same disk invisible in Mac OS X

  Read the article

• ^C not working in zsh on Mac OSX

  - by Vitaly Kushner

  Ctrl-C stopped working for me at the terminal when using zsh (on mac osx). I didn't notice the exact moment that it happend so I can't be sure what caused it. I didd't update zsh in a while though. and didn't touch .zshrc (I have it at a repo http://github.com/astrails/dotzsh) If I run bash, ^C works in it. If I run any command, like cat, ^C will work to stop it too. but inside zsh it just doesn't do anything. bindkey | grep \\^C gives "^B"-"^C" self-insert zsh 4.3.10 (i386-apple-darwin10.4.3), installed though ports (zsh-devel @4.3.10_0+doc+examples+mp_completion+pcre) mac os 10.6.6

  Read the article

• Windows 7 Internet Sharing - How to have simultaneous Internet Access to my client

  - by Marl

  The condition: I'm running on windows 7, I'm using a usb broad band for my computer, then my computer is connected to the router tp-link tl-wr340g (in this sense my computer is the internet source since my router has no usb port for this type of broad band). I set the broad band to have internet sharing. I got 3-4 client connected through the router. The problem is whenever a client is using the internet, other clients including me don't have internet connection, additionally, If I have the internet access other clients don't have internet access. In my setup in windows XP (bridging the broad band and the router network) it works perfectly fine, every one has simultaneous internet. To clarify, how can I have all clients including me have internet connection simultaneously in my windows 7 OS? //Additionally, the create "network bridge" setup is missing, from this link the "Bridge Connection is missing", how can I fix that?

  Read the article

• One network, two macbooks, one is fast and the other is slow

  - by Brendan

  I really need help for my friend. I know next to nothing about computers. My roommate and I both have macbook pros from the same year running OS X, are both connecting wirelessly to the same xfinity wifi, and while mine runs perfectly fine, my roommate complains that his works very slowly and times out every few seconds. I can't seem to figure out why this is. He is trying to get me to switch internet providers because he is convinced that it is their problem, but this cannot possibly be the issue since it works great on mine. He has an xbox hooked up to the wifi that he says also works poorly. I really can't see switching providers given that I am experiencing absolutely zero problems. How can I help my friend?

  Read the article

• hdd fail, allows format, allows copy

  - by Bogdan

  Hello I have a problem with a Fujitsu laptop. Some kid played with it and now the hdd is a wreck. I can't install Windows XP, Windows 7 or Linux. I checked with hiren's boot for bad sector did a chdisk on it says I don't have any bad sectors, on smart says is active but status error. I tried format and it worked, I tried copying files using a live CD and it worked, but when I try to install the OS it says it can't format, or it can't copy files.

  Read the article

• Migrating XenServer VMs from Intel to AMD servers

  - by John Smith

  I need to replace my XenServer 6.1 resource pool hardware. I currently run Intel hardware and I have to move to AMD hardware (corporate politics and budget stuff, blah blah blah). I have downtime available so I can use cold migration - live migration is not required. I will also have the new hardware (AMD) alongside the old hardware (Intel). The XenServer docs say there may be problems exporting from one arch and importing to another "may not work" - http://docs.vmd.citrix.com/XenServer/6.1.0/1.0/en_gb/guest.html#importing_vms - but mentions nothing about simply turning off the VM on one arch and then powering it back on new arch. VMs are a mix of OS - some Windows, some Linux, multiple versions. Is this something that can be done with no problems, or are there problems I need to be aware of?

  Read the article

• application monitoring tools

  - by Shachar

  we're an ISV about to deploy our SaaS application over the internet to our end users, and are currently looking for an application monitoring solution. In addition to monitoring the usual OS-level suspects (I/O, disk space, logs, CPU, RAM, swapping, etc.), we're also looking to monitor, alert and report on internal application events, conditions, and counters (think queue size for internal service, or latency of a service we're getting from a third party via custom APIs). We're started looking at Nagios, Zenoss, etc., but found out those do only low-level stuff, and are currently looking at MOM and ManageEngine. Still, they are far from being an custom app monitoring tool. So - do you have anything to suggest?

  Read the article

• USB ports not recognizing devices (vista)

  - by frank

  I'm trying to fix a problem on a Vista machine where all the USB ports seem to have power but they don't recognize devices plugged into them. It seemed to start after I plugged my mp3 player (sansa clip) into it and disconnect it. So it sounds similar to this article http://support.microsoft.com/kb/817900 but that was for XP. And I did try all the fixes (including the registry entry) but they did not help. It also sounds similar to this SU question 50110 but I don't think it is the mother board. I have see other places that suggest reinstalling the OS...but that seems like a last resort type of thing. I have also seen a suggestion of doing a system restore but not sure if that will help. Any ideas of what I can try?

  Read the article

• Laptop hardware recommendations for multi-platform development

  - by iama

  I am thinking of buying a laptop with the following configuration - Intel core 2 duo(or I3-330M)/ 4GB RAM/300+ GB 7200 RPM. I would like to be able to run two server VMs on this laptop with Win2K8 and Ubuntu (preferably 64 bit editions). Windows 7 will be the Host OS since that is the one that ships with the laptop. I am thinking of using VMWare player to run the two server OSs. Is this laptop good enough to run the two VMs side by side or do I need to go for a better configuration? Any suggestions? Thanks.

  Read the article

• OpenSolaris with no gcc vs. Nexenta with no ext3

  - by Jake Wharton

  I'm attempting to migrate my server from linux to a Solaris variant during a hardware upgrade. The machine is based around an Abit AN-M2 board which has an NForce chipset. I have what seems to be a chicken-and-egg problem of sorts: OpenSolaris 2009.06 does not recognize the NIC and I cannot compile the drivers for it as it also lacks gcc. I haven't tested as to whether or not I can mount an ext3 partition yet but its moot if there is no networking. Nexenta 3.0b3 recognizes the NIC but I cannot get the ext3 drives mounted due to FSWfspart refusing to install. I do not know much about Solaris but I wager this is due to the fact that Nexenta is based around Debian as well. While I am reusing the mobo/CPU combo, I did just spent a lot of money on the other hardware around it and would very much like to get it up and running smoothly and quickly. Does anyone have any suggestions that are not: Get a new mobo/CPU Run another OS Use alternate NIC

  Read the article

• Name resolution works from desktop but not Server

  - by Joe Estes

  Sending mail via smtp.gmail.com is failing on my server. I looked on some forums and people were saying to make sure you can telnet to the smtp address first. When I telnet from my server i input this and get this error: [root@localhost ~]# telnet smtp.gmail.com 465 telnet: smtp.gmail.com: Temporary failure in name resolution smtp.gmail.com: Host name lookup failure From my OS X desktop I do the same and get this: Macintosh-3:~ joe$ telnet smtp.gmail.com 465 Trying 74.125.127.109... Connected to gmail-smtp-msa.l.google.com. I'm running a fedora core 9 server with a firestarter firewall. I have turned off the firewall and the same error persists. I'm also using port forwarding from my router to this server. I have allowed forwarding for port 465 on my router as well. Can someone please help. Thanks, Joe

  Read the article

• OSX: Why does an uninstalled program ask for inbound connections on login? How do I fix this?

  - by CT

  I uninstalled an application using AppZapper called PdaNet. It is a tethering application for my phone. Now every time I login, I am asked if I would like to allow inboud connections from PdaNet by the firewall. A search for PdaNet with spotlight does not return any results. PdaNet creates its own Ethernet in network preferences. This hung around after uninstall. I deleted it but it did not make a difference. Any ideas? Mac OS X 10.6.4

  Read the article

• zeroing a disk with dd vs Disk Utility

  - by jdizzle

  I'm attempting to zero a disk on my Mac OS X machine. I'm going for complete zeros and unformatted, so I think of dd. Unfortunately the maximum throughput I've managed to get out of dd is 7MB/s. Just for grins I tried disk utility and it has a throughput of 19MB/s. What gives? I've tried changing the bs option on dd to all sorts of values, but it still hovers around 7MB/s. Why is disk utility so much faster?

  Read the article

• Can unexpected power loss harm a Linux install?

  - by Johan Elmander

  I am developing an application on a Linux embedded board (runs Debian) e.g. Raspberry Pi, Beagle Board/Bone, or olimex. The boards works on an environment that the electricity is cut unexpectedly (it is far complicated to place PSU, etc.) and it would happen every day couple times. I wonder if the unexpected power cuts would cause crash/problem on the Linux Operation System? If it is something that I should worry, what would you suggest to prevent the damages on OS against the unexpected power cuts? PS. The application needs to writes some data to the storage medium (SD card), I think it would not be suitable to mount it as read-only.

  Read the article

• Flushing disk cache for performance benchmarks?

  - by Ido Hadanny

  I'm doing some performance benchmark on some heavy SQL script running on postgres 8.4 on a ubuntu box (natty). I'm experiencing some pretty un-stable performance, even though I'm supposed to be the only one running on the machine (the same script on the exact same data might run in 20m and then 40m for no specific reason). So, remembering my distant DBA training, I decided I should flush the postgres cache, using sudo /etc/init.d/postgresql restart, but it's still shaky! My question: maybe I'm missing some caches in my disk/os? I'm using a netapp appliance as my storage. Am I on the right track? Do I even want to make sure I get repeatable performance before I start tuning?

  Read the article

< Previous Page | 564 565 566 567 568 569 570 571 572 573 574 575  | Next Page >