Search Results

Search found 20785 results on 832 pages for 'idea'.

Page 569/832 | < Previous Page | 565 566 567 568 569 570 571 572 573 574 575 576  | Next Page >

• iScsiPrt error event ID 5

  - by AZee

  Event Log: "Failed to setup initiator portal. Error status is given in the dump data." This is being recorded every 3/100's of a second. We are using MS iSCSI Initiator on Windows Server 2003, Dell 2970 w/4GB (PAE). I am sure that this was configured by Dell initially. I have no idea what changes or mods were made since the company installed this machine until now. (I'm a new User so the lovely and vibrant screen images had to be removed. They were quite pretty and I am sure you would have been very moved and appreciative of them.) It appears that everything is installed correctly and the 5TB bound volume is accessible but I have never worked with iScsi before so I plead total ignorance. In searching I have found this to be a fairly sparce and bland documented subject. I'd like two things... First, to get rid of the error msg being logged. MS says it can be ignored if everything is working but it chews up resources logging it and I don't feel comfortable about any errors on my servers. I want to correct whatever is causing this problem. Secondly, being totally green to this, I would like to confirm that the setup is optimized and we are taking advantage of all features available. Although there are 3 NIC's in this machine it appears that the initiator is only configured for the Broadcom BMC5708C NetXtreme II on our 10.90.1.#, the other 2 NICS are 1GB on the 192.168.0.#. Would additional targets improve performance? If someone who is experienced in configuring the Microsoft iScsi Initiator can help I would really appreciate it since, as I mentioned, everything I have come across has not been of any value at all. Thanks! ~AZ

  Read the article

• VSS error 521 when attempting backup

  - by blade

  Hi, I have backupassist and I attempt to run a backup, with VSS service running. However, I get this error in Windows Event Log: The backup operation that started at '?2010?-?04?-?30T01:51:15.601000000Z' has failed because the Volume Shadow Copy Service operation to create a shadow copy of the volumes being backed up failed with following error code '2155348129'. Please review the event details for a solution, and then rerun the backup operation once the issue is resolved. Code: 521. The error in backupassist is: The backup operation stopped before completing. Detailed error: ERROR - A Volume Shadow Copy Service operation error has occurred: (0x80042336) The writer experienced a partial failure. Check the component level error state for more information. Log of files successfully backed up: C:\Windows\Logs\WindowsServerBackup\Backup-29-04-2010_18-51-15.log Log of files for which backup failed: C:\Windows\Logs\WindowsServerBackup\Backup_Error-29-04-2010_18-51-15.log A Volume Shadow Copy Service operation failed. Please check "VSS" and "SPP" application event logs for more information. ERROR - A Volume Shadow Copy Service operation error has occurred: (0x80042336) The writer experienced a partial failure. Check the component level error state for more information. Any idea how to fix this? I work in a company with server engineers, they all state of having no problems with 2008 and VSS (though in the company we use predominantly 2003). Without vss working, I assume no backup application will work? Thanks

  Read the article

• Kodak Scanner Software Issue 0xc0000005

  - by Andrew

  I am trying to be able to use a program called Kodak Smart Touch, but just today I have experienced an error preventing it from opening. The scanner is a business class scanner, an i2900. It comes with a small program called Kodak Smart Touch. This program allows you to select and customize a number of presets on the front panel and automatically create/save scanned files, etc. I was running a backup with Aomei Backupper at the time, and I wanted to scan a file. I tried to scan as normal, but right at the end the program quit with an error. Now, whenever I try to start Smart Touch, even not running the backup and with Aomei uninstalled, the following error pops up: Title of message: KSSCFG (version 1.7.15.121102) has stopped working. Body: See (path name) for more information. When I go to the path in the error message, there are two files, ERRORLOG.txt and KSSCFG.dmp. The error log says, "KSSCFG (version 1.7.15.322.121102) case an Access Violation(0xc0000005). Error occur at 2014/06/11 21:37:54 Operation System: Windows 7 64bits (6.1.7601) processor(s) type AMD x86 or x64" The dump file can be downloaded here: http://l.bitcasa.com/yzbtv1VV Opening it with a hex editor yields very little of use, but I do have an internal commandline utility that may help: http://l.bitcasa.com/cTXvAsst I've already uninstalled and reinstalled all the kodak software several times to no avail. What is really odd is that the TWAIN and ISIS drivers work fine through another scanning program. I am at my wit's end, and I have no idea what to do next. Thanks.

  Read the article

• VLC (Server) re-stream Security Camera Feed

  - by Aaron

  I purchased a Swann Home Security DVR system and was hoping for some help on how to duplicate the streaming video on my server. In order to get their web view (streaming video in the browser) to work, I had to install the following plugins: HiDvrPlugin.dmg for mac. Hidvrocx.cab for Windows. I was originally thinking it was a sign of some form of DRM? Maybe. Maybe not. HTML wise, the following code is in the source of the safari version of the web view: <embed pluginspage="SurveilClient.dmg" width="10px" height="10px" type="application/x-scplugin" id="MacDiv" style="height: 592px; width: 720px; left: 278px; top: 61px; "> It seems to be the main display area. Using wireshark, I am able to see that the video stream is on port 9000. However, I have no idea what type of stream it is. I've tried opening it in VLC with no such luck. http://dvr_ip:9000 tcp://dvr_ip:9000 My hope was to do the following to redistribute the feed vlc dvr_ip:9000 --sout h264-version-on-localhost:3000 TLDR; Trying to re-distribute a stream from a security camera (can't tell the format) using vlc (re-distribute via h.264 / HTML5). Not sure how to accomplish this. Is it possible that the software has some type of DRM that only the plugins can decode?

  Read the article

• Mod Rewrite Help - Pseudo-Subdirectories

  - by Gimpyfuzznut

  I am dealing with a frustrating problem with Joomla that is going to require some url trickery. The idea is straight-forward but after reading a bunch of guides for mod-rewrite, I still can't seem to get it work. Let's say my site is www.mysite.com. Joomla is already performing some rewriting for SEF urls so I have links like www.mysite.com/home and www.mysite.com/news and so on. I want to be able to have (4) pseudo-subdirectories like www.mysite.com/mode1/ and www.mysite.com/mode2/ and so on. These subdirectories should work as if the subdirectory isn't there, ie both www.mysite.com/mode1/home and www.mysite.com/mode2/home should pull up the same www.mysite.com/home. It should point any www.mysite.com/mode1/anypagehere to www.mysite.com/anypagehere. The reason I am asking for this is because I will be reading the url for mode1, mode2, etc, to modify the template page. There will be a landing page that will direct people to /mode1/ and /mode2/ etc and the template will change based on that. Note, that I don't want to actually pass a parameter to the url accessible by a GET or whatever because Joomla removes it (perhaps because of my current mod_rewrite settings). I've pasted the current .htaccess file. RewriteBase /joomla ##########Rewrite rules to block out some common exploits RewriteCond %{QUERY_STRING} mosConfig_[a-zA-Z_]{1,21}(=|\%3D) [OR] # Block out any script trying to base64_encode crap to send via URL RewriteCond %{QUERY_STRING} base64_encode.*\(.*\) [OR] # Block out any script that includes a <script> tag in URL RewriteCond %{QUERY_STRING} (\<|%3C).*script.*(\>|%3E) [NC,OR] # Block out any script trying to set a PHP GLOBALS variable via URL RewriteCond %{QUERY_STRING} GLOBALS(=|\[|\%[0-9A-Z]{0,2}) [OR] # Block out any script trying to modify a _REQUEST variable via URL RewriteCond %{QUERY_STRING} _REQUEST(=|\[|\%[0-9A-Z]{0,2}) # Send all blocked request to homepage with 403 Forbidden error! RewriteRule ^(.*)$ index.php [F,L] ########## Begin - Joomla! core SEF Section RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_URI} !^/index.php RewriteCond %{REQUEST_URI} (/|\.php|\.html|\.htm|\.feed|\.pdf|\.raw|/[^.]*)$ [NC] RewriteRule (.*) index.php #RewriteRule .* - [E=HTTP_AUTHORIZATION:%{HTTP:Authorization},L] ########## End - Joomla! core SEF Section

  Read the article

• OSX - User home directories shared via NFS

  - by Hugh

  Hi, I've run into some problems with how I've got user home directories set up on our system here. Our server is an XServe, using Open Directory to manage the user accounts. The majority of our workstations are OSX, but there are a few running Linux (Centos 5.3), and, as time goes on, we expect the proportion of Linux workstations to increase (at some point, we expect to move the server side over to Linux too, but for now we're running with what we've already got) To ensure that the Linux and OSX workstations both see user's home directories in the same place, I shared the home directories using NFS. On the server end, the home directories are stored in: /Volumes/data/company_users This is mounted on the workstations to: /mount/company_users This work fine on the Linux workstations, but there is some weirdness under OSX. For the user who is logged in through the GUI, it all works just fine. However, if a user tries to SSH into a machine that they are not the primary user on, they often have no access to their own home directory. It looks as though OSX is trying to do something else to the user home directories mount point when you log in through the GUI.... For example, on this machine (nv001), I (hugh) am logged into the GUI. Last login: Mon Mar 8 18:17:52 on ttys011 [nv001:~] hugh% ls -al /mount/company_users total 40 drwxrwxrwx 26 hugh wheel 840 27 Jan 19:09 . drwxr-xr-x 6 admin admin 204 19 Dec 18:36 .. drwx------+ 128 hugh staff 4308 27 Feb 23:36 hugh drwx------+ 26 matt staff 840 4 Dec 14:14 matt [nv001:~] hugh% So Matt's home directory is accessible to him. However, if I try to switch to him: [nv001:~] hugh% su - matt Password: su: no directory [nv001:~] hugh% Or: [nv001:~] hugh% su matt Password: tcsh: Permission denied tcsh: Trying to start from "/mount/company_users/matt" tcsh: Trying to start from "/" [nv001:/] matt% Does anyone have any idea why it might be doing this? It's causing me all sorts of problems at the moment... The only machine that I can successfully switch users at the moment is the server that the user directories are stored on, where /mount/company_users is actually just a symlink to /Volumes/data/company_users Thanks

  Read the article

• Nginx as a proxy to Tomcat

  - by user36812

  Pardon me, this is my first attempt at Nginx-Jetty instead of Apache-JK-Tomcat. I deployed myapp.war file to $JETTY_HOME/webapps/, and the app is accessible at the url: http://myIP:8080/myapp I did a default installation of Nginx, and the default Nginx page is accessible at myIP Then, I modified the default domain under /etc/nginx/sites-enabled to the following: server { listen 80; server_name mydomain.com; access_log /var/log/nginx/localhost.access.log; location / { #root /var/www/nginx-default; #index index.html index.htm; proxy_pass http://127.0.0.1:8080/myapp/; } error_page 500 502 503 504 /50x.html; location = /50x.html { root /var/www/nginx-default; } } Now I get the index page of mypp (running in jetty) when I hit myIP, which is good. But all the links are malformed. eg. The link to css is mydomain.com/myapp/css/style.css while what it should have been is mydomain.com/css/style.css. It seems to be mapping mydomain.com to 127.0.0.1:8080 instead of 127.0.0.1:8080/myapp/ Any idea what am missing? Do I need to change anything on the Jetty side too?

  Read the article

• Failed Backup Job With Backup Exec 12 and AOFO

  - by Mort

  I am backing up a Windows 2003 Small Business Server with SP2. We are running Backup Exec 12 with SP4. Recently the backup job started failing on backing up the system state with the following error: V-79-57344-34110 - AOFO: Initialization failure on: "System?State". Advanced Open File Option used: Microsoft Volume Shadow Copy Service (VSS). Snapshot provider error (0xE000FE7D): Access is denied. To back up or restore System State, administrator privileges are required. Check the Windows Event Viewer for details. Upon review of Symantec's website the error indicates a credential problem. However when I test the credentials they come back with no failures. I have found another forum here referencing a similar error and have tried what has been indicated with no succesful results. I have created new jobs based on new selection lists with no succesful results. I suspect a new update possibly from Microsoft may be causing this but I have no idea which one. I am looking for feedback. Thanks.

  Read the article

• How do I upgrade django on ubuntu 9.04?

  - by Lorin Hochstein

  I've got Django 1.0.2 installed on Ubuntu 9.04. I'd like to upgrade Django, because I have an app that needs Django 1.1 or greater. I tried using pip to do the upgrade, but got the following: $ sudo pip install Django==1.1 Downloading/unpacking Django==1.1 Downloading Django-1.1.tar.gz (5.6Mb): 5.6Mb downloaded Running setup.py egg_info for package Django Installing collected packages: Django Found existing installation: Django 1.0.2-final Not uninstalling Django at /var/lib/python-support/python2.6, outside environment /usr Running setup.py install for Django changing mode of build/scripts-2.6/django-admin.py from 644 to 755 changing mode of /usr/local/bin/django-admin.py to 755 Successfully installed Django It seems like it worked, but it refuses to remove the original Django 1.02, and sure enough: $ pip freeze | grep -i django Django==1.0.2-final django-debug-toolbar==0.8.3 django-sphinx==2.2.3 $ /usr/local/bin/django-admin.py --version 1.0.2 final The problem, apparently, is that pip won't uninstall files outside of /usr. I'd like to remove the existing Django files manually, but I have no idea how to do that, because I'm unfamiliar with how Python packages are laid out in Ubuntu. It looks pretty complicated. The site-packages directory is: $ python -c "from distutils.sysconfig import get_python_lib; print get_python_lib()" /usr/lib/python2.6/dist-packages However, that's not where the django files live: $ ls -ld /usr/lib/python2.6/dist-packages/[Dd]jango* ls: cannot access /usr/lib/python2.6/dist-packages/[Dd]jango*: No such file or directory There's a /var/lib/python-support/python2.6/django directory, and the __init__.py file in that directory points to /usr/share/python-support/python-django/django/__init__.py. Clearly, pip is able to figure out where the files live. Is there any way to retrieve the list of files associated with the django package so I can just delete them manually?

  Read the article

• The file STDOLE2.TLB cannot be found or contains a Visual Basic for Applications library that is not

  - by Jim Birchall

  In Microsoft Project 2007 Professional, If I select Tools Macro Security the message: The file "STDOLE.TLB" cannot be found or contains a Visual Basic for Applications library that is not valid. Verify that the file name is correct, and try again. If the Visual Basic for Applications library is invalid, reinstall Project. I am a software developer and I have developed an Add-In for MS Project using Visual Studio 2005, with all the problems that entails. As such my machine is configured with both Project 2003 Professional and Project 2007 Professional. I only noticed this error when trying to debug my Add-In. The Add-In loads and draws the menu, but when I click on the menu option I receive this error (which is also generated by the Tools Macros Security option mentioned above). I have tried repairing office installations and uninstalling everything and then re-installing everything all over again, but after several hours I still get the same problem. Does anyone have any idea how to resolve this? Some method of finding out what type libraries are registered with STDOLE2.TLB may help if I can identify what is causing the problem. Also a way of manually unregistering the nasty library may be helpful. My machine is configured as follows: Windows 7 Ultimate x64 Project 2003 Professional Office 2007 Ultimate Project 2007 Professional Visio 2007 Professional Visual Studio 2005 Team Edition for Developers Visual Studio 2005 Tools for Office Second edition Visual Studio 2008 Professional I also installed MS Project 2010 Beta to test my Add-In against, but have since uninstalled it. I have a suspicion that this may have caused the problem, but I cannot be sure.

  Read the article

• Trying to run an ASP.NET MVC application using Mono on Apache with FastCGI.

  - by Arda Xi

  I have a hosting account with DreamHost, and I would like to use the same account to run ASP.NET applications. I have an application deployed in a subdomain, a .htaccess with a handler like this: # Define the FastCGI Mono launcher as an Apache handler and let # it manage this web-application (its files and subdirectories) SetHandler monoWrapper Action monoWrapper /home/arienh4/<domain>/cgi-bin/mono.fcgi virtual My mono.fcgi is set up as such: #!/bin/sh #umask 0077 exec >>/home/arienh4/tmp/mono-fcgi.log exec 2>>/home/arienh4/tmp/mono-fcgi.err echo $(date +"[%F %T]") Starting fastcgi-mono-server2 cd / chmod 0700 /home/arienh4/tmp/mono-fcgi.sock echo $$>/home/arienh4/tmp/mono-fcgi.pid # stdin is the socket handle export PATH="/home/arienh4/mono/bin:$PATH" export LD_LIBRARY_PATH="/home/arienh4/mono/lib:$LD_LIBRARY_PATH" export TMP="/home/arienh4/tmp" export MONO_SHARED_DIR="/home/arienh4/tmp" exec /home/arienh4/mono/bin/mono /home/arienh4/mono/lib/mono/2.0/fastcgi-mono-server2.exe \ /logfile=/home/arienh4/logs/fastcgi-mono-web.log /loglevels=All \ /applications=/:/home/arienh4/<domain> I took this from the Mono site for CGI, I'm not sure if I'm doing it correctly though. This code is resulting in this error: Request exceeded the limit of 10 internal redirects due to probable configuration error. Use 'LimitInternalRecursion' to increase the limit if necessary. Use 'LogLevel debug' to get a backtrace. I have no idea what's causing this. As far as I can see, Mono isn't even hit (no log files are created).

  Read the article

• Cisco PIX to Juniper Netscreen Policy-based VPN fails Phase 2 Proposal

  - by elint

  I've followed the instructions to configure a VPN between a netscreen device and a Cisco PIX as directed by Cisco's [netscreen to PIX VPN]http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a00801c4445.shtml article. The only differences are that I'm running PIX 6.3(5) and Juniper Netscreen 6.1.0r2.0 (Firewall+VPN). I followed both configurations exactly, and when I try to connect, the Juniper returns with: 2010-02-21 12:54:28 information IKE: Removed Phase 2 SAs after receiving a notification message. 2010-02-21 12:54:28 information IKE pix_public_IP: Received a notification message for DOI 1 14 NO-PROPOSAL-CHOSEN. 2010-02-21 12:54:28 information IKE pix_public_IP Phase 2: Initiated negotiations. On the Netscreen, I've created a Phase 2 Proposal called ToCorpOffice using DH Group#2, 3DES-CBC, and SHA-1, and when configuring the AutoKey IKE, I chose ToCorpOffice and removed all other transforms. I believe I've configured the same on the PIX with: sysopt connection permit-ipsec crypto ipsec transform-set mytrans esp-3des esp-sha-hmac crypto map mymap 10 ipsec-isakmp crypto map mymap 10 match address nonat crypto map mymap 10 set pfs group2 crypto map mymap 10 set peer netscreen_public_ip crypto map mymap 10 set transform-set mytrans crypto map mymap interface outside Saved that and rebooted, so here's the cryptomap info: PIX-FW1# show crypto map Crypto Map: "mymap" interfaces: { outside } Crypto Map "mymap" 10 ipsec-isakmp Peer = netscreen_public_ip access-list nonat; 1 elements access-list nonat line 1 permit ip 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0 (hitcnt=0) Current peer: netscreen_public_ip Security association lifetime: 4608000 kilobytes/28800 seconds PFS (Y/N): Y DH group: group2 Transform sets={ mytrans, } PIX-FW1# Any idea why I'm getting a NO-PROPOSAL-CHOSEN error?

  Read the article

• Apache: VirtualHost *:80 -- mixing * ports and non-* ports with a NameVirtualHost address is not sup

  - by user45761

  Hi, when i add the line below to /etc/apache2/apache2.conf I get the error belower when i restart apache: Include /usr/share/doc/apache2.2-common/examples/apache2/extra/httpd-vhosts.conf [Mon Jun 14 12:16:47 2010] [error] VirtualHost *:80 -- mixing * ports and non-* ports with a NameVirtualHost address is not supported, proceeding with undefined results [Mon Jun 14 12:16:47 2010] [warn] NameVirtualHost *:80 has no VirtualHosts This is my httpd-vhosts.conf file: # # Use name-based virtual hosting. # NameVirtualHost *:80 # # VirtualHost example: # Almost any Apache directive may go into a VirtualHost container. # The first VirtualHost section is used for all requests that do not # match a ServerName or ServerAlias in any <VirtualHost> block. <VirtualHost *:80> ServerName tirengarfio.com DocumentRoot /var/www/rs3 <Directory /var/www/rs3> AllowOverride All Options MultiViews Indexes SymLinksIfOwnerMatch Allow from All </Directory> Alias /sf /var/www/rs3/lib/vendor/symfony/data/web/sf <Directory "/var/www/rs3/lib/vendor/symfony/data/web/sf"> AllowOverride All Allow from All </Directory> </VirtualHost> Any idea? Regards Javi

  Read the article

• Apache: VirtualHost *:80 -- mixing * ports and non-* ports with a NameVirtualHost address is not sup

  - by user45761

  Hi, when i add the line below to /etc/apache2/apache2.conf I get the error belower when i restart apache: Include /usr/share/doc/apache2.2-common/examples/apache2/extra/httpd-vhosts.conf [Mon Jun 14 12:16:47 2010] [error] VirtualHost *:80 -- mixing * ports and non-* ports with a NameVirtualHost address is not supported, proceeding with undefined results [Mon Jun 14 12:16:47 2010] [warn] NameVirtualHost *:80 has no VirtualHosts This is my httpd-vhosts.conf file: # # Use name-based virtual hosting. # NameVirtualHost *:80 # # VirtualHost example: # Almost any Apache directive may go into a VirtualHost container. # The first VirtualHost section is used for all requests that do not # match a ServerName or ServerAlias in any <VirtualHost> block. <VirtualHost *:80> ServerName tirengarfio.com DocumentRoot /var/www/rs3 <Directory /var/www/rs3> AllowOverride All Options MultiViews Indexes SymLinksIfOwnerMatch Allow from All </Directory> Alias /sf /var/www/rs3/lib/vendor/symfony/data/web/sf <Directory "/var/www/rs3/lib/vendor/symfony/data/web/sf"> AllowOverride All Allow from All </Directory> </VirtualHost> Any idea? Regards Javi

  Read the article

• Installing gitosis and closed port?

  - by Nicolas GUILLAUME

  I'm trying to install gitosis on a Server (hosted by OVH and running Ubuntu server 11.04). I've done it a few times and never had any problems. But this time I have something very wired when I simply try to clone gitosis. [root@ovks-1:~/]#git clone git://eagain.net/gitosis.git Cloning into gitosis... eagain.net[0: 208.78.102.120]: errno=Connection refused fatal: unable to connect a socket (Connection refused) zsh: exit 128 git clone git://eagain.net/gitosis.git Based on my searches it looks like the port 9418 is closed. But I don't understand, a server by definition shouldn't have any closed port and I can't find a way to see if they are. So how can I check is a port is open and how can I open it if closed? Thank you for your help. Requested by WesleyDavid: iptables -L result [root@odeoos-vks-1:~/]#iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination I have no idea what it means... Thanks :)

  Read the article

• Samba on OS X 10.6.4

  - by Niklas Saers

  I just updated from 10.6.3 to 10.6.4, and now my Samba shares won't mount and won't allow access into the directories. In the logs, I've started to get the following errors, any idea what might have gone wrong? 2010/06/25 15:54:27, 0, pid=13848] /SourceCache/samba/samba-235.4/samba/source/passdb/secrets.c:secrets_fetch_domain_sid(150) secrets_fetch_domain_sid:opendirectory_query_domain_sid gave -14136 [eDSRecordNotFound] [2010/06/25 15:54:27, 0, pid=13850] /SourceCache/samba/samba-235.4/samba/source/lib/opendirectory.c:get_opendirectory_authenticator(247) failed to read DomainAdmin credentials, err=67 fd=19 errno=34 [2010/06/25 15:54:27, 1, pid=13850] /SourceCache/samba/samba-235.4/samba/source/smbd/service.c:make_connection_snum(1092) winsrv (10.0.0.8) connect to service Dates initially as user johnd (uid=1028, gid=20) (pid 13850) [2010/06/25 15:54:42, 1, pid=13850] /SourceCache/samba/samba-235.4/samba/source/smbd/service.c:close_cnum(1289) winsrv (10.0.0.8) closed connection to service Dates [2010/06/25 15:54:44, 0, pid=13850] /SourceCache/samba/samba-235.4/samba/source/passdb/pdb_odsam.c:odssam_getsampwnam(1576) opendirectory_sam_searchname gave -14136 [eDSRecordNotFound]: no dsRecTypeStandard:Users record for account 'Administrator' [2010/06/25 15:54:48, 0, pid=13850] /SourceCache/samba/samba-235.4/samba/source/lib/opendirectory.c:get_opendirectory_authenticator(247) failed to read DomainAdmin credentials, err=67 fd=28 errno=34 [2010/06/25 15:54:48, 1, pid=13850] /SourceCache/samba/samba-235.4/samba/source/smbd/service.c:make_connection_snum(1092) winsrv (10.0.0.8) connect to service Dates initially as user johnd (uid=1028, gid=20) (pid 13850) Cheers Nik

  Read the article

• Random software/shutdown problems Mac mini

  - by Oliver

  Hello I have a Mac mini using OS X 10.5.8. Recently I've been having problems that are becoming increasingly severe. Particular symptoms: Firefox "quits" but the dot on the dock remains. If I try shutting down at this point I can't and have to use the power button. I can't start Firefox either. Significantly higher than normal crash rate for CS4 Illustrator Photoshop and Dreamweaver. If Firefox remains open when sleeping the Mac, on waking up firefox is completely unresponsive and must be restarted. Can cause problem 1. Today I lost all my FTP settings for Dreamweaver CS4 Bluetooth switches on when booting despite being switched off. Network password retention is somewhat erractic. Tried running Apple Hardware Test as described in the manual. Cannot access install disk by pressing D at startup. My pen tablet (Bamboo) lost my preferences. Tried unstalling software and now cannot re-install. I've never had problems of this level outside warranty before so I don't know much about debugging Macs. Solutions attempted: Disable bluetooth (see problem 5) Disable time machine Run appple harware test (see problem 7) Tried using activity monitor but don't know which processes are normal Tried uninstalling more recent software. I don't have any idea what to do. It seems like a hard disk failure but I don't have the know how to continue.

  Read the article

• LDAP authentication issue with Kerio Connect

  - by djk

  We have Kerio Connect (mail server) running on a Windows Server 2003 server on a domain. In the webmail client, users are able to change their domain password. This functionality used to work fine until a user tried to change their password a few days ago, when every password they'd try would result in the webmail client claiming their password was "invalid". I spoke to Kerio about this and they claim that this error is returned by the domain controller, which supports my initial investigations. The error that the DC is logging when an attempt is made to change the password is this: "80090308: LdapErr: DSID-0C090334, comment: AcceptSecurityContext error, data 52e, vece" The "data 52e" part indicates that this is an "invalid credentials" error. I don't see how this can be as I've tried (in the Kerio Connect configuration) various accounts that have privileges to modify accounts, including my own as I am a domain admin. I have ran 'dcdiag' (all tests) on the DC and it came back passing every single one of them. I've searched high and low for an answer to this and came up empty. Does anyone have any idea why this may have suddenly started happening? Thanks! Edit: I should mention that the passwords we are changing to do comply with the complexity policy.

  Read the article

• mount.nfs: access denied by server while mounting (null), can't find any log information

  - by Mark0978

  Two ubuntu servers: 10.0.8.2 is the client, 192.168.20.58 is the server. Between the 2 machines, Ping works, ssh works (in both directions). From 10.0.8.2 showmount -e 192.168.20.58 Export list for 192.168.20.58: /imr/nfsshares/foobar 10.0.8.2 mount.nfs 192.168.20.58:/imr/nfsshares/foobar /var/data/foobar -v mount.nfs: access denied by server while mounting (null) Found several things online, tried them all and still can't find any log information anywhere. On the server: [email protected]:/var/log# cat /etc/hosts.allow sendmail: all ALL: 10.0.8.2 /etc/hosts.deny is all comments How can I get a trail of log statements to figure this out? What does it take to get some logging so I have some idea of WHY it won't mount? On the server: [email protected]# nmap -sR RPC 192.168.20.58 Starting Nmap 5.21 ( http://nmap.org ) at 2012-07-04 21:16 CDT Failed to resolve given hostname/IP: RPC. Note that you can't use '/mask' AND '1-4,7,100-' style IP ranges Nmap scan report for 192.168.20.58 Host is up (0.0000060s latency). Not shown: 988 closed ports PORT STATE SERVICE VERSION 22/tcp open unknown 80/tcp open unknown 111/tcp open unknown 139/tcp open unknown 445/tcp open unknown 902/tcp open unknown 2049/tcp open unknown 3000/tcp open unknown 5666/tcp open unknown 8009/tcp open unknown 8222/tcp open unknown 8333/tcp open unknown Nmap done: 1 IP address (1 host up) scanned in 3.81 seconds From the client: [email protected]:~$ nmap -sR RPC 192.168.20.58 Starting Nmap 5.21 ( http://nmap.org ) at 2012-07-04 22:14 EDT Failed to resolve given hostname/IP: RPC. Note that you can't use '/mask' AND '1-4,7,100-' style IP ranges Nmap scan report for 192.168.20.58 Host is up (0.73s latency). Not shown: 988 closed ports PORT STATE SERVICE VERSION 22/tcp open unknown 80/tcp open unknown 111/tcp open rpcbind (rpcbind V2) 2 (rpc #100000) 139/tcp open unknown 445/tcp open unknown 902/tcp open unknown 2049/tcp open nfs (nfs V2-4) 2-4 (rpc #100003) 3000/tcp open unknown 5666/tcp open unknown 8009/tcp open unknown 8222/tcp open unknown 8333/tcp open unknown Nmap done: 1 IP address (1 host up) scanned in 191.56 seconds

  Read the article

• Windows7 - “The specified network password is not correct.” when the password is in fact correct.

  - by Win7 Home User

  I have a samba server setup for some time now. It is a Hardware NAS - which unfortunately does not provide access to the Samba logs. (the exact model of the NAS is called Addonics NAS Adapter ) I also have a Windows Vista and a Windows XP machine - from both I am able to map \\192.168.0.20\Smd with no errors ( net use l: \\192.168.0.20\Smd works, after asking for my username and password). I also bought a brand new computer, with Windows 7, and when I try to execute the same exact net use command on it - using the exact same username/password pair, I get a "The specified network password is not correct." message. I also tried mapping from the Windows explorer menu, and got the same error. I synchronized the clocks of the two machines, tried again... and yet the same error persists. So what is really surprising here is that mapping works from WindowXP and Windows Vista machines, but fails from a Windows7 machine using the exact same command and username/password - Anyone has any idea of what could be causing this or how to solve the problem? Thanks

  Read the article

• Intel 1.83 Mac Mini upgraded to 1.5 gig for Snow Leopard

  - by Paula

  Even though I've upgraded countless video cards, RAM, harddrives, motherboards in PCs... this will be my first mac mini RAM upgrade. I've watched the classic "putty knife" video. (Absurd method... but I guess it's what I'm stuck with.) I have a 1.83 Intel-based Mac Mini from 2007-2008, with 1 gig of RAM. (Two 512 sticks) Can I install 1 gig + 512 ? (Or do I have to throw away my existing sticks and buy two 1 gig sticks?) This old machine is rarely used... so I want to spend the absolute minimum on this RAM upgrade. We ONLY use it to run xCode... nothing more. But wanted to increase the RAM so we can install Snow Leopard. I have no idea how many pins the memory has. I printed out over FORTY pages of specs about this machine from "About this Mac"... but didn't find what I needed. Does this sound right: DDR2 SDRAM (but no mention of SO-DIMM) 667MHZ (but don't know if I can use faster also) Pin count: Unknown Computer model number: Unknown (But I "think" it's an MB138/A) PC2 RAM (unknown... not mentioned) 5300 (unknown... not mentioned) Mfg date: (unknown... not mentioned) Number of slots: (unknown... not mentioned) Laptop or desktop RAM: (unknown... not mentioned)

  Read the article

• Existing open source software for wireless mesh networking?

  - by user70352

  Hello! My goal: Build a wireless mesh network with some ALIX 2D2 (500 MHz AMD Geode LX800 x86 CPU, 256MB RAM, Atheros wireless card) Aside from working like a normal wireless mesh network users should be able to read/write data from/to the ALIX Boxes and the ALIX boxes should be able to process data. Questions: Should I try to flash dd-wrt x86, voyage linux (linux.voyage.hk) or something else? What (open source) software should I look into before I start? Should I use a 'server' for data storage and processing instead of the ALIX boxes? Is it even possible to use the ALIX boxes for routing AND data storage and processing? Final notes: Data can be anything, for example, I want to setup a wireless mesh using the OLSRD protocol so my whole town gets wifi and can access songs on the network. It's not for that, but that's the idea. I'm not afraid of programing, compiling or working with *nix. This is mostly 'for fun' rather than for practicality. Thanks in advance for any feedback.

  Read the article

• How to get robocopy running in powershell?

  - by Mark Allison

  Hi, I'm trying to use robocopy inside powershell to mirror some directories on my home machines. Here's my script: param ($configFile) $config = Import-Csv $configFile $what = "/COPYALL /B /SEC/ /MIR" $options = "/R:0 /W:0 /NFL /NDL" $logDir = "C:\Backup\" foreach ($line in $config) { $source = $($line.SourceFolder) $dest = $($line.DestFolder) $logfile = $logDIr $logfile += Split-Path $dest -Leaf $logfile += ".log" robocopy "$source $dest $what $options /LOG:MyLogfile.txt" } The script takes in a csv file with a list of source and destination directories. When I run the script I get these errors: ------------------------------------------------------------------------------- ROBOCOPY :: Robust File Copy for Windows ------------------------------------------------------------------------------- Started : Sat Apr 03 21:26:57 2010 Source : P:\ C:\Backup\Photos \COPYALL \B \SEC\ \MIR \R:0 \W:0 \NFL \NDL \LOG:MyLogfile.txt\ Dest - Files : *.* Options : *.* /COPY:DAT /R:1000000 /W:30 ------------------------------------------------------------------------------ ERROR : No Destination Directory Specified. Simple Usage :: ROBOCOPY source destination /MIR source :: Source Directory (drive:\path or \\server\share\path). destination :: Destination Dir (drive:\path or \\server\share\path). /MIR :: Mirror a complete directory tree. For more usage information run ROBOCOPY /? **** /MIR can DELETE files as well as copy them ! Any idea what I need to do to fix? Thanks, Mark.

  Read the article

• Hudson authentication via wget is return http error 302

  - by Rafael

  Hello, I'm trying to make a script to authenticate in hudson using wget and store the authentication cookie. The contents of the script is this: wget \ --no-check-certificate \ --save-cookies /home/hudson/hudson-authentication-cookie \ --output-document "-" \ 'https://myhudsonserver:8443/hudson/j_acegi_security_check?j_username=my_username&j_password=my_password&remember_me=true' Unfortunately, when I run this script, I get: --2011-02-03 13:39:29-- https://myhudsonserver:8443/hudson/j_acegi_security_check? j_username=my_username&j_password=my_password&remember_me=true Resolving myhudsonserver... 127.0.0.1 Connecting to myhudsonserver|127.0.0.1|:8443... connected. WARNING: cannot verify myhudsonserver's certificate, issued by `/C=Unknown/ST=Unknown/L=Unknown/O=Unknown/OU=Unknown/CN=myhudsonserver': Self-signed certificate encountered. HTTP request sent, awaiting response... 302 Moved Temporarily Location: https://myhudson:8443/hudson/;jsessionid=087BD0B52C7A711E0AD7B8BD4B47585F [following] --2011-02-03 13:39:29-- https://myhudsonserver:8443/hudson/;jsessionid=087BD0B52C7A711E0AD7B8BD4B47585F Reusing existing connection to myhudsonserver:8443. HTTP request sent, awaiting response... 404 Not Found 2011-02-03 13:39:29 ERROR 404: Not Found. There's no error log in any of hudson's tomcat log files. Does anyone has any idea about what might be happening? Thanks.

  Read the article

• Ubuntu 12.04 Preseed LDAP Config

  - by Arturo

  I'm trying to deploy Ubuntu 12.04 via xCAT, everything works except the automatic configuration of LDAP, the preseed file is read but the file /etc/nsswitch is not written properly. My Preseed File: [...] ### LDAP Setup nslcd nslcd/ldap-bindpw password ldap-auth-config ldap-auth-config/bindpw password ldap-auth-config ldap-auth-config/rootbindpw password ldap-auth-config ldap-auth-config/binddn string cn=proxyuser,dc=example,dc=net libpam-runtime libpam-runtime/profiles multiselect unix, ldap, gnome-keyring, consolekit, capability ldap-auth-config ldap-auth-config/dbrootlogin boolean false ldap-auth-config ldap-auth-config/rootbinddn string cn=manager,dc=xcat-domain,dc=com nslcd nslcd/ldap-starttls boolean false nslcd nslcd/ldap-base string dc=xcat-domain,dc=com ldap-auth-config ldap-auth-config/pam_password select md5 ldap-auth-config ldap-auth-config/move-to-debconf boolean true ldap-auth-config ldap-auth-config/ldapns/ldap-server string ldap://192.168.32.42 ldap-auth-config ldap-auth-config/ldapns/base-dn string dc=xcat-domain,dc=com ldap-auth-config ldap-auth-config/override boolean true libnss-ldapd libnss-ldapd/clean_nsswitch boolean false libnss-ldapd libnss-ldapd/nsswitch multiselect passwd,group,shadow nslcd nslcd/ldap-reqcert select ldap-auth-config ldap-auth-config/ldapns/ldap_version select 3 ldap-auth-config ldap-auth-config/dblogin boolean false nslcd nslcd/ldap-uris string ldap://192.168.32.42 nslcd nslcd/ldap-binddn string [...] After the installation, nsswitch.conf rimains unchanged. Has someone an idea?? Thanks!

  Read the article

< Previous Page | 565 566 567 568 569 570 571 572 573 574 575 576  | Next Page >