Search Results

Search found 2346 results on 94 pages for 'dedicated'.

Page 57/94 | < Previous Page | 53 54 55 56 57 58 59 60 61 62 63 64  | Next Page >

  • Can I eventually consider myself a professional developer if I don't have a CS degree? [on hold]

    - by heltonbiker
    Question first, context later: If I am a dedicated, self-taught programmer, always seeking top-quality books AND READING THEM, while successfully applying all that new knowledge into my current work, could I call myself (and offer my work as) a PROFESSIONAL developer? How limiting (or how common) that is nowadays? I am afraid that, no matter how hard I study and practice, it could be too difficult to compete with "actual", college graduated developers, and potential employers might have doubts investing in an "undergraduated" person. Now, context: My former profession is from healthcare sector, then I studied mechanical engineering (quit in the middle), then I studied product design (master degree), and I ended up working (very happily) at an engineering company that manufactures medical devices. For more than two years now my main activity in this company is software development. The devices contain software, and we gave up hiring software development (domain knowledge needed, too much communication cost). My current company sees a lot of value in what I do, but I cannot afford the risk of depending on this single company for the rest of my life, you get it. But a lot of job offers require some minimal formal education, usually a CS degree. Fact is that I am sure this is my target profession, I don't plan to go to another area, it is a pleasure to dive into books that normal people would consider unreadable, but I'm 36 years old and can't see going back to college as a viable alternative.

    Read the article

  • With Google DFP (Small Business) is it possible to disable AdSense in an Ad Slot on a per-request basis?

    - by Daniel Pehrson
    Setup: I run a network of websites that target different hobby niches and have a section dedicated to community classifieds. I serve advertising on these sites through Google DFP for Small Business with AdSense enabled on the slots. Problem: One of the next sites in my network will be targeting the firearms/shooting industry and as such the classifieds section will not comply with the prohibited content guidelines of AdSense regarding the sale (or coordination of sale) of weapons. I work very hard to comply with the guidelines of my partners even if I don't understand/agree with them and after talking with many people have decided that the best option is to disable AdSense serving on that section of that website, while leaving it on for the rest of the network. Solution: Right now my only idea for this is to duplicate all my site's ad slots and tack a "_sensitive" onto the end of each one (eg. header and header_sensitive) conditionally registering ad slots based on whether or not I am in the sensitive section of the sensitive site. My hope however is that there may be a way to accomplish this without duplicating all my ad slots possibly with some sort of options to the GA_googleFillSlot() call that allows me to say "load ads from this slot but do not serve AdSense no matter what."

    Read the article

  • Need some critique on .NET/WCF SOA architecture plan

    - by user998101
    I am working on a refactoring of some services and would appreciate some critique on my general approach. I am working with three back-end data systems and need to expose an authenticated front-end API over http binding, JSON, and REST for internal apps as well as 3rd party integration. I've got a rough idea below that's a hybrid of what I have and where I intend to wind up. I intend to build guidance extensions to support this architecture so that devs can build this out quickly. Here's the current idea for our structure: Front-end WCF routing service (spread across multiple IIS servers via hardware load balancer) Load balancing of services behind routing is handled within routing service, probably round-robin One of the services will be a token Multiple bindings per-service exposed to address JSON, REST, and whatever else comes up later All in/out is handled via POCO DTOs Use unity to scan for what services are available and expose them The front-end services behind the routing service do nothing more than expose the API and do conversion of DTO<-Entity Unity inject service implementation to allow mocking automapper for DTO/Entity conversion Invoke WF services where response required immediately Queue to ESB for async WF -- ESB will invoke WF later Business logic WF layer Expose same api as front-end services Implement business logic Wrap transaction context where needed Call out to composite/atomic services Composite/Atomic Services Exposed as WCF One service per back-end system Standard atomic CRUD operations plus composite operations Supports transaction context The questions I have are: Are the separation of concerns outlined above beneficial? Current thought is each layer below is its own project, except the backend stuff, where each system gets one project. The project has a servicehost and all the services are under a services folder. Interfaces live in a separate project at each layer. DTO and Entities are in two separate projects under a shared folder. I am currently planning to build dedicated services for shared functionality such as logging and overload things like tracelistener to call those services. Is this a valid approach? Any other suggestions/comments?

    Read the article

  • Ubuntu 12.04 gets overheated, whereas I have no heating problems on Windows 7 whatsoever

    - by G K
    I bought a new laptop which came pre-installed with Windows 7. I love working on Ubuntu and hence installed it. I can work on Windows for 6 hours at a stretch and feel the laptop being only slightly warm, but 15 minutes into running Ubuntu and my laptop is too hot. The battery also drains out very quickly on Ubuntu. 1.5 hrs of backup on Ubuntu compared to 5-6 hrs on Windows. I previously owned a Dell Inspiron N5010 and everything ran smoothly on that. No heating issues. It came with intel i3 processor. So I'm wondering whether this problem has something to do with the processor? (AMD A8) Specs: HP Pavilion G6-2005AX Laptop (APU Quad Core A8/ 4GB/ 500GB/ Win7 HB/ 1.5GB Graph) 1 GB AMD Radeon HD 7670M Dedicated 512 MB AMD Radeon HD 7640G Graphics Integrated Is there any fix for this problem? Thanks in advance. Edit: I've installed ATI proprietary drivers suggested by Ubuntu.

    Read the article

  • Meet the Spec Leads & Active JSRs

    - by heathervc
    For your Monday reading pleasure, the JCP has published Spec Lead Profiles of In Progress/Active JSRs--there are 35 of these Spec Leads!  Find out more about these dedicated community leaders.  In preparing these profiles, the PMO also asked Specification Leads to tell about their experiences  as Spec Leads.  There were many themes that emerged around transparency, openness, agility and participation.  This led to a related article for those interested in learning about the experience of participating in the development of a Java Specification through the JCP program, see: "Active Specification Leads Offer Best Practices and Tips for Success". In Progress/Active JSRs were also reported on in the PMO Presentation during the last JCP EC Face-to-Face meeting in September 2012.   Now is a good time to start thinking about nominations for Star Spec Leads.  Nominations for 2012 are now open.  Anyone can submit a nomination for Star Spec Lead; however, we ask that you nominate an active JSR Spec Lead, operating a JSR under JCP program version 2.8 (introduced October 2011) or above.  Nominations close 31 December 2012.

    Read the article

  • Server Setups for Agencies [closed]

    - by styks1987
    We are considering consolidating our server administration by cutting down on the number of systems we currently use to manage all our websites(~65 websites). Currently we have a testing server and 3 production servers. (2 - cherokee(linode), 1 - apache (mt)) We don't have a dedicated server admin, so I am stuck with managing all these servers, and as a developer, I don't want to deal with all the server hassle. So my main goal is to cut down on the time spent messing with the servers. We have looked at Pagoda Box and AppFog as possibilities. I am not sure if Pagoda Box would be cost effective. With 65+ websites we may end up paying anywhere from 0 to $50+ per website per month. Right now we page about $250 per month for the 4 VPS servers mentioned above. We already use Capistrano for deployment. I have the opportunity to completely overhaul the entire setup and I would like some feedback on where you found your information for large scale server management or how you currently do it. Articles are welcome. In summary: What is new (past 2 years) in simple server management arena? If you work at an agency or have had agency experience, how do/did you manage your sites? a. What is the level of effort for SSL, new site setup, database management, and extension management. b. How did you handle datacenter outages. Anyone with Pagoda Box experience, do you like it and did you have problems with Wordpress, Cakephp, Drupal, Expression Engine or Magento? a. Is it expensive for you? b. How has server uptime been? Your direction and comments are greatly appreciated.

    Read the article

  • how to deal with controller mutations

    - by Milovan Zogovic
    During development process, things are constantly changing (especially in early phases). Requirements change, UI changes, everything changes. Pages that clearly belonged to specific controller, mutated to something completely different in the future. For example. Lets say that we have website for managing Projects. One page of the website was dedicated to managing existing, and inviting new members of specific project. Naturally, I created members controller nested under projects which had proper responsibility. Later in the development, it turned out that it was the only page that was "configuring the project" in some way, so additional functionalities were added to it: editing project description setting project as a default ... In other words, this page changed its primary responsibility from managing project members to managing project itself. Ideally, this page should be moved to "edit" action of "projects" controller. That would mean that all request and controller specs need to refactored too. Is it worth the effort? Should it be done? Personally, I am really starting to dislike the 1-1 relationship between views and controllers. Its common situation that we have 1 page (view) that handles 2 or more different resources. I think we should have views completely decoupled from controllers, but rails is giving us hard time to achieve this. I know that AJAX can be used to solve this issue, but I consider it an improvisation. Is there some other kind of architecture (other than MVC) that decouples views from controllers?

    Read the article

  • Store scores for players and produce a high score list

    - by zrvan
    This question is derived from an interview question that I got for a job I was declined. I have asked for code review for my solution at the dedicated Stack Exchange site. But I hope this question is sufficiently rephrased and asked with a different motivation not to be a duplicate of the other question. Consider the following scenario: You should store player scores in the server back end of a game. The server is written in Java. Every score should be registered, that is, one player may have any number of scores for any number of levels. A high score list should be produced with the fifteen top scores for a given level, but only one score per user (to the effect that even if player X has the two highest scores for level Y, only the first position is counted and player Z has the second place). No information should be persisted and only Java 1.7+ standard libraries should be used. No third party libraries or frameworks are acceptable. With the number of players as the primary factor, what would be the best data structure in terms of scalability and concurrency? How would you access the structure to register a single score given a level and a player id? How would you access the structure to compile the high score list?

    Read the article

  • How do I solve "System is running in low graphics issue" in Ubuntu INSTALLER ?

    - by hellodear
    I made a bootable USB for installing Ubuntu 12.04 LTS alongside Windows 8.1. I inserted my USB device and then booted into it. Then it showed me 2 options - 'Try Ubuntu' or 'Install Ubuntu'. Now I press 'Try Ubuntu' and then it says, "The system is running in low graphics mode". Then I press 'OK'. Then it showed me 4 options. Then again I click 'OK'. Then it shows a black screen and nothing happens. I have tried all possible answers provided in AU. What should I do? Please help. PS :- I am using Windows 8.1 with dedicated graphic card which is AMD Radeon HD 8670M. I am trying to do this in a Dell Laptop 3537 Inspiron. UPDATE :- I tried running the liveUSB session with nomodeset on and i was able to enter the installer. But when I run boot-repair(so that my Ubuntu gets detected in the GRUB menu) after installing Ubuntu successfully alongside Windows 8(following this tutorial with nomodeset on, I get the following error:- your system is running in legacy mode boot repair done

    Read the article

  • eBooks on iPad vs. Kindle: More Debate than Smackdown

    - by andrewbrust
    When the iPad was presented at its San Francisco launch event on January 28th, Steve Jobs spent a significant amount of time explaining how well the device would serve as an eBook reader. He showed the iBooks reader application and iBookstore and laid down the gauntlet before Amazon and its beloved Kindle device. Almost immediately afterwards, criticism came rushing forth that the iPad could never beat the Kindle for book reading. The curious part of that criticism is that virtually no one offering it had actually used the iPad yet. A few weeks later, on April 3rd, the iPad was released for sale in the United States. I bought one on that day and in the few additional weeks that have elapsed, I’ve given quite a workout to most of its capabilities, including its eBook features. I’ve also spent some time with the Kindle, albeit a first-generation model, to see how it actually compares to the iPad. I had some expectations going in, but I came away with conclusions about each device that were more scenario-based than absolute. I present my findings to you here.   Vital Statistics Let’s start with an inventory of each device’s underlying technology. The iPad has a color, backlit LCD screen and an on-screen keyboard. It has a battery which, on a full charge, lasts anywhere from 6-10 hours. The Kindle offers a monochrome, reflective E Ink display, a physical keyboard and a battery that on my first gen loaner unit can go up to a week between charges (Amazon claims the battery on the Kindle 2 can last up to 2 weeks on a single charge). The Kindle connects to Amazon’s Kindle Store using a 3G modem (the technology and network vary depending on the model) that incurs no airtime service charges whatsoever. The iPad units that are on-sale today work over WiFi only. 3G-equipped models will be on sale shortly and will command a $130 premium over their WiFi-only counterparts. 3G service on the iPad, in the U.S. from AT&T, will be fee-based, with a 250MB plan at $14.99 per month and an unlimited plan at $29.99. No contract is required for 3G service. All these tech specs aside, I think a more useful observation is that the iPad is a multi-purpose Internet-connected entertainment device, while the Kindle is a dedicated reading device. The question is whether those differences in design and intended use create a clear-cut winner for reading electronic publications. Let’s take a look at each device, in isolation, now.   Kindle To me, what’s most innovative about the Kindle is its E Ink display. E Ink really looks like ink on a sheet of paper. It requires no backlight, it’s fully visible in direct sunlight and it causes almost none of the eyestrain that LCD-based computer display technology (like that used on the iPad) does. It’s really versatile in an all-around way. Forgive me if this sounds precious, but reading on it is really a joy. In fact, it’s a genuinely relaxing experience. Through the Kindle Store, Amazon allows users to download books (including audio books), magazines, newspapers and blog feeds. Books and magazines can be purchased either on a single-issue basis or as an annual subscription. Books, of course, are purchased singly. Oddly, blogs are not free, but instead carry a monthly subscription fee, typically $1.99. To me this is ludicrous, but I suppose the free 3G service is partially to blame. Books and magazine issues download quickly. Magazine and blog subscriptions cause new issues or posts to be pushed to your device on an automated basis. Available blogs include 9000-odd feeds that Amazon offers on the Kindle Store; unless I missed something, arbitrary RSS feeds are not supported (though there are third party workarounds to this limitation). The shopping experience is integrated well, has an huge selection, and offers certain graphical perks. For example, magazine and newspaper logos are displayed in menus, and book cover thumbnails appear as well. A simple search mechanism is provided and text entry through the physical keyboard is relatively painless. It’s very easy and straightforward to enter the store, find something you like and start reading it quickly. If you know what you’re looking for, it’s even faster. Given Kindle’s high portability, very reliable battery, instant-on capability and highly integrated content acquisition, it makes reading on whim, and in random spurts of downtime, very attractive. The Kindle’s home screen lists all of your publications, and easily lets you select one, then start reading it. Once opened, publications display in crisp, attractive text that is adjustable in size. “Turning” pages is achieved through buttons dedicated to the task. Notes can be recorded, bookmarks can be saved and pages can be saved as clippings. I am not an avid book reader, and yet I found the Kindle made it really fun, convenient and soothing to read. There’s something about the easy access to the material and the simplicity of the display that makes the Kindle seduce you into chilling out and reading page after page. On the other hand, the Kindle has an awkward navigation interface. While menus are displayed clearly on the screen, the method of selecting menu items is tricky: alongside the right-hand edge of the main display is a thin column that acts as a second display. It has a white background, and a scrollable silver cursor that is moved up or down through the use of the device’s scrollwheel. Picking a menu item on the main display involves scrolling the silver cursor to a position parallel to that menu item and pushing the scrollwheel in. This navigation technique creates a disconnect, literally. You don’t really click on a selection so much as you gesture toward it. I got used to this technique quickly, but I didn’t love it. It definitely created a kind of anxiety in me, making me feel the need to speed through menus and get to my destination document quickly. Once there, I could calm down and relax. Books are great on the Kindle. Magazines and newspapers much less so. I found the rendering of photographs, and even illustrations, to be unacceptably crude. For this reason, I expect that reading textbooks on the Kindle may leave students wanting. I found that the original flow and layout of any publication was sacrificed on the Kindle. In effect, browsing a magazine or newspaper was almost impossible. Reading the text of individual articles was enjoyable, but having to read this way made the whole experience much more “a la carte” than cohesive and thematic between articles. I imagine that for academic journals this is ideal, but for consumer publications it imposes a stripped-down, low-fidelity experience that evokes a sense of deprivation. In general, the Kindle is great for reading text. For just about anything else, especially activity that involves exploratory browsing, meandering and short-attention-span reading, it presents a real barrier to entry and adoption. Avid book readers will enjoy the Kindle (if they’re not already). It’s a great device for losing oneself in a book over long sittings. Multitaskers who are more interested in periodicals, be they online or off, will like it much less, as they will find compromise, and even sacrifice, to be palpable.   iPad The iPad is a very different device from the Kindle. While the Kindle is oriented to pages of text, the iPad orbits around applications and their interfaces. Be it the pinch and zoom experience in the browser, the rich media features that augment content on news and weather sites, or the ability to interact with social networking services like Twitter, the iPad is versatile. While it shares a slate-like form factor with the Kindle, it’s effectively an elegant personal computer. One of its many features is the iBook application and integration of the iBookstore. But it’s a multi-purpose device. That turns out to be good and bad, depending on what you’re reading. The iBookstore is great for browsing. It’s color, rich animation-laden user interface make it possible to shop for books, rather than merely search and acquire them. Unfortunately, its selection is rather sparse at the moment. If you’re looking for a New York Times bestseller, or other popular titles, you should be OK. If you want to read something more specialized, it’s much harder. Unlike the awkward navigation interface of the Kindle, the iPad offers a nearly flawless touch-screen interface that seduces the user into tinkering and kibitzing every bit as much as the Kindle lulls you into a deep, concentrated read. It’s a dynamic and interactive device, whereas the Kindle is static and passive. The iBook reader is slick and fun. Use the iPad in landscape mode and you can read the book in 2-up (left/right 2-page) display; use it in portrait mode and you can read one page at a time. Rather than clicking a hardware button to turn pages, you simply drag and wipe from right-to-left to flip the single or right-hand page. The page actually travels through an animated path as it would in a physical book. The intuitiveness of the interface is uncanny. The reader also accommodates saving of bookmarks, searching of the text, and the ability to highlight a word and look it up in a dictionary. Pages display brightly and clearly. They’re easy to read. But the backlight and the glare made me less comfortable than I was with the Kindle. The knowledge that completely different applications (including the Web and email and Twitter) were just a few taps away made me antsy and very tempted to task-switch. The knowledge that battery life is an issue created subtle discomfort. If the Kindle makes you feel like you’re in a library reading room, then the iPad makes you feel, at best, like you’re under fluorescent lights at a Barnes and Noble or Borders store. If you’re lucky, you’d be on a couch or at a reading table in the store, but you might also be standing up, in the aisles. Clearly, I didn’t find this conducive to focused and sustained reading. But that may have more to do with my own tendency to read periodicals far more than books, and my neurotic . And, truth be known, the book reading experience, when not explicitly compared to Kindle’s, was still pleasant. It is also important to point out that Kindle Store-sourced books can be read on the iPad through a Kindle reader application, from Amazon, specific to the device. This offered a less rich experience than the iBooks reader, but it was completely adequate. Despite the Kindle brand of the reader, however, it offered little in terms of simulating the reading experience on its namesake device. When it comes to periodicals, the iPad wins hands down. Magazines, even if merely scanned images of their print editions, read on the iPad in a way that felt similar to reading hard copy. The full color display, touch navigation and even the ability to render advertisements in their full glory makes the iPad a great way to read through any piece of work that is measured in pages, rather than chapters. There are many ways to get magazines and newspapers onto the iPad, including the Zinio reader, and publication-specific applications like the Wall Street Journal’s and Popular Science’s. The New York Times’ free Editors’ Choice application offers a Times Reader-like interface to a subset of the Gray Lady’s daily content. The completely Web-based but iPad-optimized Times Skimmer site (at www.nytimes.com/timesskimmer) works well too. Even conventional Web sites themselves can be read much like magazines, given the iPad’s ability to zoom in on the text and crop out advertisements on the margins. While the Kindle does have an experimental Web browser, it reminded me a lot of early mobile phone browsers, only in a larger size. For text-heavy sites with simple layout, it works fine. For just about anything else, it becomes more trouble than it’s worth. And given the way magazine articles make me think of things I want to look up online, I think that’s a real liability for the Kindle.   Summing Up What I came to realize is that the Kindle isn’t so much a computer or even an Internet device as it is a printer. While it doesn’t use physical paper, it still renders its content a page at a time, just like a laser printer does, and its output appears strikingly similar. You can read the rendered text, but you can’t interact with it in any way. That’s why the navigation requires a separate cursor display area. And because of the page-oriented rendering behavior, turning pages causes a flash on the display and requires a sometimes long pause before the next page is rendered. The good side of this is that once the page is generated, no battery power is required to display it. That makes for great battery life, optimal viewing under most lighting conditions (as long as there is some light) and low-eyestrain text-centric display of content. The Kindle is highly portable, has an excellent selection in its store and is refreshingly distraction-free. All of this is ideal for reading books. And iPad doesn’t offer any of it. What iPad does offer is versatility, variety, richness and luxury. It’s flush with accoutrements even if it’s low on focused, sustained text display. That makes it inferior to the Kindle for book reading. But that also makes it better than the Kindle for almost everything else. As such, and given that its book reading experience is still decent (even if not superior), I think the iPad will give Kindle a run for its money. True book lovers, and people on a budget, will want the Kindle. People with a robust amount of discretionary income may want both devices. Everyone else who is interested in a slate form factor e-reading device, especially if they also wish to have leisure-friendly Internet access, will likely choose the iPad exclusively. One thing is for sure: iPad has reduced Kindle’s market, and may have shifted its mass market potential to a mere niche play. If Amazon is smart, it will improve its iPad-based Kindle reader app significantly. It can then leverage the iPad channel as a significant market for the Kindle Store. After all, selling the eBooks themselves is what Amazon should care most about.

    Read the article

  • CodePlex Daily Summary for Saturday, December 04, 2010

    CodePlex Daily Summary for Saturday, December 04, 2010Popular ReleasesMiniTwitter: 1.62: MiniTwitter 1.62 ???? ?? ??????????????????????????????????????? 140 ?????????????????????????? ???????????????????????????????? ?? ??????????????????????????????????Chronos WPF: Chronos v2.0 Beta 3: Release notes: Updated introduction document. Updated Visual Studio 2010 Extension (vsix) package. Added horizontal scrolling to the main window TaskBar. Added new styles for ListView, ListViewItem, GridViewColumnHeader, ... Added a new WindowViewModel class (allowing to fetch data). Added a new Navigate method (with several overloads) to the NavigationViewModel class (protected). Reimplemented Task usage for the WorkspaceViewModel.OnDelete method. Removed the reflection effect...MDownloader: MDownloader-0.15.26.7024: Fixed updater; Fixed MegauploadDJ - jQuery WebControls for ASP.NET: DJ 1.2: What is new? Update to support jQuery 1.4.2 Update to support jQuery ui 1.8.6 Update to Visual Studio 2010 New WebControls with samples added Autocomplete WebControl Button WebControl ToggleButt WebControl The example web site is including in source code project.LateBindingApi.Excel: LateBindingApi.Excel Release 0.7g: Unterschiede zur Vorgängerversion: - Zusätzliche Interior Properties - Group / Ungroup Methoden für Range - Bugfix COM Reference Handling für Application Objekt in einigen Klassen Release+Samples V0.7g: - Enthält Laufzeit DLL und Beispielprojekte Beispielprojekte: COMAddinExample - Demonstriert ein versionslos angebundenes COMAddin Example01 - Background Colors und Borders für Cells Example02 - Font Attributes undAlignment für Cells Example03 - Numberformats Example04 - Shapes, WordArts, P...ESRI ArcGIS Silverlight Toolkit: November 2010 - v2.1: ESRI ArcGIS Silverlight Toolkit v2.1 Added Windows Phone 7 build. New controls added: InfoWindow ChildPage (Windows Phone 7 only) See what's new here full details for : http://help.arcgis.com/en/webapi/silverlight/help/#/What_s_new_in_2_1/016600000025000000/ Note: Requires Visual Studio 2010, .NET 4.0 and Silverlight 4.0.ASP .NET MVC CMS (Content Management System): Atomic CMS 2.1.1: Atomic CMS 2.1.1 release notes Atomic CMS installation guide Winware: Winware 3.0 (.Net 4.0): Winware 3.0 is base on .Net 4.0 with C#. Please open it with Visual Studio 2010. This release contains a lab web application.WTV-MetaRenamer: Build 6910: Includes two new areas of functionality - the ability to move renamed files and not just rename them, and the ability to "remap" characters that might cause problems. These address #308, #281 and #417. Please read the documentation carefully as the configuration file has new options to support this functionality. There are now TWO XML files included in the download Zip file. The 2nd one has some additional lines for example reasons. This version is considered to be stable enough and feature...Free Silverlight & WPF Chart Control - Visifire: Visifire SL and WPF Charts v3.6.5 beta Released: Hi, Today we are releasing Visifire 3.6.5 beta with the following new feature: New property AutoFitToPlotArea has been introduced in DataSeries. AutoFitToPlotArea will bring bubbles inside the PlotArea in order to avoid clipping of bubbles in bubble chart. Also this release includes few bug fixes: AxisXLabel label were getting clipped if angle was set for AxisLabels and ScrollingEnabled was not set in Chart. If LabelStyle property was set as 'Inside', size of the Pie was not proper. Yo...EnhSim: EnhSim 2.1.1: 2.1.1This release adds in the changes for 4.03a. To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 - Switched Searing Flames bac...Microsoft - Domain Oriented N-Layered .NET 4.0 App Sample (Microsoft Spain): V1.0 - N-Layer DDD Sample App .NET 4.0: Required Software (Microsoft Base Software needed for Development environment) Visual Studio 2010 RTM & .NET 4.0 RTM (Final Versions) Expression Blend 4 SQL Server 2008 R2 Express/Standard/Enterprise Unity Application Block 2.0 - Published May 5th 2010 http://www.microsoft.com/downloads/en/details.aspx?FamilyID=2D24F179-E0A6-49D7-89C4-5B67D939F91B&displaylang=en http://unity.codeplex.com/releases/view/31277 PEX & MOLES 0.94.51023.0, 29/Oct/2010 - Visual Studio 2010 Power Tools http://re...Sense/Net Enterprise Portal & ECMS: SenseNet 6.0.1 Community Edition: Sense/Net 6.0.1 Community Edition This half year we have been working quite fiercely to bring you the long-awaited release of Sense/Net 6.0. Download this Community Edition to see what we have been up to. These months we have worked on getting the WebCMS capabilities of Sense/Net 6.0 up to par. New features include: New, powerful page and portlet editing experience. HTML and CSS cleanup, new, powerful site skinning system. Upgraded, lightning-fast indexing and query via Lucene. Limita...Minecraft GPS: Minecraft GPS 1.1.1: New Features Compass! New style. Set opacity on main window to allow overlay of Minecraft. Open World in any folder. Fixes Fixed style so listbox won't grow the window size. Fixed open file dialog issue on non-vista kernel machines.DotSpatial: DotSpatial 11-28-2001: This release introduces some exciting improvements. Support for big raster, both in display and changing the scheme. Faster raster scheme creation for all rasters. Caching of the "sample" values so once obtained the raster symbolizer dialog loads faster. Reprojection supported for raster and image classes. Affine transform fully supported for images and rasters, so skewed images are now possible. Projection uses better checks when loading unprojected layers. GDAL raster support f...Virtu: Virtu 0.9.0: Source Requirements.NET Framework 4 Visual Studio 2010 or Visual Studio 2010 Express Silverlight 4 Tools for Visual Studio 2010 Windows Phone 7 Developer Tools (which includes XNA Game Studio 4) Binaries RequirementsSilverlight 4 .NET Framework 4 XNA Framework 4SuperWebSocket: SuperWebSocket(60438): It is the first release of SuperWebSocket. Because it is base on SuperSocket, most features of SuperSocket are supported in SuperWebSocket. The source code include a LiveChat demo.Cropper: 1.9.4: Mostly fixes for issues with a few feature requests. Fixed Issues 2730 & 3638 & 14467 11044 11447 11448 11449 14665 Implemented Features 6123 11581PFC: PFC for PB 11.5: This is just a migration from the 11.0 code. No changes have been made yet (and they are needed) for it to work properly with 11.5.PDF Rider: PDF Rider 0.5: This release does not add any new feature for pdf manipulation, but enables automatic updates checking, so it is reccomended to install it in order to stay updated with next releases. Prerequisites * Microsoft Windows Operating Systems (XP - Vista - 7) * Microsoft .NET Framework 3.5 runtime * A PDF rendering software (i.e. Adobe Reader) that can be opened inside Internet Explorer. Installation instructionsChoose one of the following methods: 1. Download and run the "pdfRider0...New ProjectsAnimal Rescue: Animal Rescue will provide a single application for animal rescue groups to maintain any group, animal, foster, medical, etc information and publish the information to various locations. AR is developed in C# and will provide Web and WinForm presentations. ASP.NET 4.0 in practice: ASP.NET 4.0 in Practice contains real world techniques from well-known professionals who have been using ASP.NET since the first previews. Published by Manning, 2011 - Contains code samples from the book.Aspx to Razor Converter: An experimental project to create ASP.NET MVC webform view pages to Razor view pages.AutoWinUI: Automate Application on Windows by UI AutomationBookstore_web: lame ass comment C++ Galois Field Arithmetic Library: The C++ Galois Field Arithmetic Library, implements a specialised version of Galois Fields known as extension fields or in other words fields of the form GF(2^m) and was developed as a base for programming tasks that involved cryptography and error correcting codes.C++ TCP Proxy Server: The C++ TCP Proxy server is a simple utility using the ASIO networking library, for proxying (tunneling or redirecting) connections from external clients to a specific server. The TCP Proxy server can be used to easily and efficiently.Cache Providers For .NET: Cache Provider for .NET helps enterprise applications use popular Provider model. It ships with AppFabric Cache Provider (code named Velocity) and Classic Cache Provider and can be used with ASP.NET, Windows Forms, Windows Services, WCF and WPF.Columbus: Windows Phone 7 MVC framework: Columbus is MVC framework designed specifically for WP7 platform and supports: - Strongly typed navigation with history - View Models that can survive tombstoning - Asynchronous and cancelable controller actions with execution progress - Commands (CAB style)ComplexCode: complex codeDice Shaker: Coding4Fun Windows Phone 7 Dice Shaker applicationEscola do Futuro: Escola do Futuro será mais do que um simples repositório de aulas (mp3 ou mp4) ! Nosso intuito é gerar um projeto que além de ensinar ou repassar o conhecimento, iremos formar as pessoas. O usuário do projeto será capaz de obter o conhecimento com apenas poucos clicks! ExpressionParser: A library designed to read user entered string and evaluate it as an math expression. - Able to understand all the operators that Excel users are used to. - Expose the System.Math functions, but allow additional functions to be added by API - Allow variables access via delegategrouptalk: grouptalkIn-House Normal Report: it is a normal report, just for practice, thanks very much.Jetnett Common Controls: Controls used related to and used by various JetNett productsJSON Tiny Serializer dedicated to output JavaScript string fom C# object: This C# JSon Serializer is dedicated to output JavaScript string from .Net managed object. The code is oriented performance and running more than twice fast as the standard .Net 4 JavaScriptSerializer. Recursive Check and Size limit are implemented. MSX jIDE: Kit de Ferramentas , IDE e Framework para MSX feitos em JAVAMy Text Editor: This is a simple text editor in C# written and compiled in Visual studio 2005. It's in a beta version and needs feedbacks and comments..........Online Course Feedback System: Online Course Feedback System is used to automate the collection of Course Feedback in an academic institution.PerformanceTester: Application to test performance using 5 criteriaPersonal Activity Monitor: simple, personal activity monitor. See how much time do you spend using different applications. Localize your time wasters and minimize them and be happy with more time for your productivityphuongnamco: Products of PhuongNam companypocketpalireader: PocketPC application for reading Pali Tipitaka. Includes Pali Canon library and Pali-English dictionary.Powershell Script for associating Workflow for a library iteratively: Workflow associator powershell script makes easier for associating the workflows for a particular document library to all webs inside a particular site collection. It is no longer a manual activity. Its developed in Powershell 2.0Rotempco.Core: Rotempco.CoreTkalm - A Social Chat System: Tkalm is a social chat system. Important Note: This is part of an ASP.NET Development training, so don't expect too muchTrueForecast: Just a test-project...Weak-coupling Develop Framework: Use like csla objectWeather Report: I Was feeling very cold from last two days and wanted to plan an outing so got to see weather forcast and from there got idea to develop this software which is a kind of Desktop Gadget.Windows Phone Notification Pusher: Application to push notifications to Windows Phone.Words Reminder: A software for people with Persian language who want to learn English language. It reminds the words that user marked them to remind. This software is also a perfect English-to-Persian dictionary with ability to pronounce the words.XEMail: XEMail is a webservice that provides SMTP / POP3 / IMAP functionality

    Read the article

  • Tips for XNA WP7 Developers

    - by Michael B. McLaughlin
    There are several things any XNA developer should know/consider when coming to the Windows Phone 7 platform. This post assumes you are familiar with the XNA Framework and with the changes between XNA 3.1 and XNA 4.0. It’s not exhaustive; it’s simply a list of things I’ve gathered over time. I may come back and add to it over time, and I’m happy to add anything anyone else has experienced or learned as well. Display · The screen is either 800x480 or 480x800. · But you aren’t required to use only those resolutions. · The hardware scaler on the phone will scale up from 240x240. · One dimension will be capped at 800 and the other at 480; which depends on your code, but you cannot have, e.g., an 800x600 back buffer – that will be created as 800x480. · The hardware scaler will not normally change aspect ratio, though, so no unintended stretching. · Any dimension (width, height, or both) below 240 will be adjusted to 240 (without any aspect ratio adjustment such that, e.g. 200x240 will be treated as 240x240). · Dimensions below 240 will be honored in terms of calculating whether to use portrait or landscape. · If dimensions are exactly equal or if height is greater than width then game will be in portrait. · If width is greater than height, the game will be in landscape. · Landscape games will automatically flip if the user turns the phone 180°; no code required. · Default landscape is top = left. In other words a user holding a phone who starts a landscape game will see the first image presented so that the “top” of the screen is along the right edge of his/her phone, such that the natural behavior would be to turn the phone 90° so that the top of the phone will be held in the user’s left hand and the bottom would be held in the user’s right hand. · The status bar (where the clock, battery power, etc., are found) is hidden when the Game-derived class sets GraphicsDeviceManager.IsFullScreen = true. It is shown when IsFullScreen = false. The default value is false (i.e. the status bar is shown). · You should have a good reason for hiding the status bar. Users find it helpful to know what time it is, how much charge their battery has left, and whether or not their phone is in service range. This is especially true for casual games that you expect someone to play for a few minutes at a time, e.g. while waiting for some event to start, for a phone call to come in, or for a train, bus, or subway to arrive. · In portrait mode, the status bar occupies 32 pixels of space. This means that a game with a back buffer of 480x800 will be scaled down to occupy approximately 461x768 screen pixels. Setting the back buffer to 480x768 (or some resolution with the same 0.625 aspect ratio) will avoid this scaling. · In landscape mode, the status bar occupies 72 pixels of space. This means that a game with a back buffer of 800x480 will be scaled down to occupy approximately 728x437 screen pixels. Setting the back buffer to 728x480 (or some resolution with the same 1.51666667 aspect ratio) will avoid this scaling. Input · Touch input is scaled with screen size. · So if your back buffer is 600x360, a tap in the bottom right corner will come in as (599,359). You don’t need to do anything special to get this automatic scaling of touch behavior. · If you do not use full area of the screen, any touch input outside the area you use will still register as a touch input. For example, if you set a portrait resolution of 240x240, it would be scaled up to occupy a 480x480 area, centered in the screen. If you touch anywhere above this area, you will get a touch input of (X,0) where X is a number from 0 to 239 (in accordance with your 240 pixel wide back buffer). Any touch below this area will give a touch input of (X,239). · If you keep the status bar visible, touches within its area will not be passed to your game. · In general, a screen measurement is the diagonal. So a 3.5” screen is 3.5” long from the bottom right corner to the top left corner. With an aspect ratio of 0.6 (480/800 = 0.6), this means that a phone with a 3.5” screen is only approximately 1.8” wide by 3” tall. So there are approximately 267 pixels in an inch on a 3.5” screen. · Again, this time in metric! 3.5 inches is approximately 8.89 cm. So an 8.89 cm screen is 8.89 cm long from the bottom right corner to the top left corner. With an aspect ratio of 0.6, this means that a phone with an 8.89 cm screen is only approximately 4.57 cm wide by 7.62 cm tall. So there are approximately 105 pixels in a centimeter on an 8.89 cm screen. · Think about the size of your finger tip. If you do not have large hands, think about the size of the fingertip of someone with large hands. Consider that when you are sizing your touch input. Especially consider that when you are spacing two touch targets near one another. You need to judge it for yourself, but items that are next to each other and are each 100x100 should be fine when it comes to selecting items individually. Smaller targets than that are ok provided that you leave space between them. · You want your users to have a pleasant experience. Making touch controls too small or too close to one another will make them nervous about whether they will touch the right target. Take this into account when you plan out your game initially. If possible, do some quick size mockups on an actual phone using colored rectangles that you position and size where you plan to have your game controls. Adjust as necessary. · People do not have transparent hands! Nor are their hands the size of a mouse pointer icon. Consider leaving a dedicated space for input rather than forcing the user to cover up to one-third of the screen with a finger just to play the game. · Another benefit of designing your controls to use a dedicated area is that you’re less likely to have players moving their finger(s) so frantically that they accidentally hit the back button, start button, or search button (many phones have one or more of these on the screen itself – it’s easy to hit one by accident and really annoying if you hit, e.g., the search button and then quickly tap back only to find out that the game didn’t save your progress such that you just wasted all the time you spent playing). · People do not like doing somersaults in order to move something forward with accelerometer-based controls. Test your accelerometer-based controls extensively and get a lot of feedback. Very well-known games from noted publishers have created really bad accelerometer controls and been virtually unplayable as a result. Also be wary of exceptions and other possible failures that the documentation warns about. · When done properly, the accelerometer can add a nice touch to your game (see, e.g. ilomilo where the accelerometer was used to move the background; it added a nice touch without frustrating the user; I also think CarniVale does direct accelerometer controls very well). However, if done poorly, it will make your game an abomination unto the Marketplace. Days, weeks, perhaps even months of development time that you will never get back. I won’t name names; you can search the marketplace for games with terrible reviews and you’ll find them. Graphics · The maximum frame rate is 30 frames per second. This was set as a compromise between battery life and quality. · At least one model of phone is known to have a screen refresh rate that is between 59 and 60 hertz. Because of this, using a fixed time step with a target frame rate of 30 will cause a slight internal delay to build up as the framework is forced to wait slightly for the next refresh. Eventually the delay will get to the point where a draw is skipped in order to recover from the delay. (See Nick's comment below for clarification.) · To deal with that delay, you can either stay with a fixed time step and set the frame rate slightly lower or else you can go to a variable time step and make sure to adjust all of your update data (e.g. player movement distance) to take into account the elapsed time from the last update. A variable time step makes your update logic slightly more complicated but will avoid frame skips entirely. · Currently there are no custom shaders. This might change in the future (there is no hardware limitation preventing it; it simply wasn’t a feature that could be implemented in the time available before launch). · There are five built-in shaders. You can create a lot of nice effects with the built-in shaders. · There is more power on the CPU than there is on the GPU so things you might typically off-load to the GPU will instead make sense to do on the CPU side. · This is a phone. It is not a PC. It is not an Xbox 360. The emulator runs on a PC and uses the full power of your PC. It is very good for testing your code for bugs and doing early prototyping and layout. You should not use it to measure performance. Use actual phone hardware instead. · There are many phone models, each of which has slightly different performance levels for I/O, screen blitting, CPU performance, etc. Do not take your game right to the performance limit on your phone since for some other phones you might be crossing their limits and leaving players with a bad experience. Leave a cushion to account for hardware differences. · Smaller screened phones will have slightly more dots per inch (dpi). Larger screened phones will have slightly less. Either way, the dpi will be much higher than the typical 96 found on most computer screens. Make sure that whoever is doing art for your game takes this into account. · Screens are only required to have 16 bit color (65,536 colors). This is common among smart phones. Using gradients on a 16 bit display can produce an ugly artifact known as banding. Banding is when, rather than a smooth transition from one color to another, you instead see distinct lines. Be careful to avoid this when possible. Banding can be avoided through careful art creation. Its effects can be minimized and even unnoticeable when the texture in question is always moving. You should be careful not to rely on “looks good on my phone” since some phones do have 32-bit displays and thus you’ll find yourself wondering why you’re getting bad reviews that complain about the graphics. Avoid gradients; if you can’t, make sure they are 16-bit safe. Audio · Never rely on sounds as your sole signal to the player that something is happening in the game. They might have the sound off. They might be playing somewhere loud. Etc. · You have to provide controls to disable sound & music. These should be separate. · On at least one model of phone, the volume control API currently has no effect. Players can adjust sound with their hardware volume buttons, but in game selectors simply won’t work. As such, it may not be worth the effort of providing anything beyond on/off switches for sound and music. · MediaPlayer.GameHasControl will return true when a game is hooked up to a PC running Zune. When Zune is running, any attempts to do anything (beyond check GameHasControl) with MediaPlayer will cause an exception to be thrown. If this exception is thrown, catch it and disable music. Exceptions take time to propagate; you don’t want one popping up in every single run of your game’s Update method. · Remember that players can already be listening to music or using the FM radio. In this case GameHasControl will be false and you should handle this appropriately. You can, alternately, ask the player for permission to stop their current music and play your music instead, but the (current) requirement that you restore their music when done is very hard (if not impossible) to deal with. · You can still play sound effects even when the game doesn’t have control of the music, but don’t think this is a backdoor to playing music. Your game will fail certification if your “sound effect” seems to be more like music in scope and length.

    Read the article

  • ASP.NET MVC2 on GoDaddy

    - by MVCDummy09
    I've talked to GoDaddy several times but no one there knows what they're talking about. I'm creating a simple web site for a local company who uses GoDaddy Windows Shared hosting and I'd like to create the project using MVC version 2. The first time the guy said he hadn't heard of MVC and that GoDaddy doesn't support it. The second time I called they said they only support MVC on dedicated hosting and he wasn't sure about MVC 2 specifically. The third time I called the guy said I could run MVC 2 on shared hosting. Anyone that actually has experience know?

    Read the article

  • Multiple INET sockets (mulple IP's too) connected to UNIX sockets

    - by Andrew
    HOST = same host all the time, accepts multiple connection. I have a dedicated server and I will buy extra IP's. Socket 1 connects to HOST:PORT, from IP-1 Socket 2 connects to HOST:PORT, from IP-1 Socket 3 connects to HOST:PORT, from IP-1 Socket 4 connects to HOST:PORT, from IP-2 Socket 5 connects to HOST:PORT, from IP-2 Socket 6 connects to HOST:PORT, from IP-2 After creating all sockets I want to access them easy as UNIX sockets from PHP. /sys/socket1 /sys/socket2 /sys/socket3 /sys/socket4 /sys/socket5 /sys/socket6 I want the sockets to work in background (like daemon) and I want to be able to connect from PHP to any of this sockets and RECV/SEND whatever I want. I saw "socat" and I think that's the solution for me, please tell me how to use socat, or how to do it other way. Thankyou!

    Read the article

  • Developing online invoicing and inventory application.

    - by RPK
    My clients are using a desktop version of my inventory solution that I developed using .NET. I want to make an online version so that data is available centrally and clients can work from any location. I searched using Google to find similar tools and found few. I want to know what type of security considerations to take while designing such an application? Some clients can't afford dedicated server cost. What if I use shared hosting only? What are the risks of shared hosting?

    Read the article

  • AJAX POST problems with CKFinder

    - by Muller
    We're using CKFinder for one of our sites, which has been working fine for us until we moved to a new dedicated server (which is similar but not exactly the same as the old server). Now we cant upload, the AJAX request simply never finishes. From monitoring it in Firebug it attempts to POST to here: http://www.site.com/temp/ckfinder/core/connector/php/connector.php?command=FileUpload&type=Files&currentFolder=%2F&hash=4f9cdbbb1e295966&langCode=en&= but never gets a response. This is the same CKFinder install on both WIMP servers, one works fine one doesnt. any idea where we should be looking to fix this problem? php.ini maybe? any help would be great as we havent a clue at this stage. Thanks

    Read the article

  • A help system for a PHP web app

    - by Dave
    Hi, As our new web app gets more complicated, so the need for help docs increases. I am not talking about documenting code, I am literally talking about application help. So myapp/help, or for example, enabling context help from a particular point in the app with a link such as myapp/help/users/create/ etc. Are there apps out there for doing this? For example, Wufoo use wordpress for http://wufoo.com/docs/ which I like (and understand wp, so its a nice solution), and Xero have a lovely ASPX http://help.xero.com/ interface. But I'm thinking there might be more dedicated implementations for what I'm looking for. We're on a linux, apache, postgresql, php stack, but a mysql supported installation is not the end of the world. Does anyone have any suggestions for this? It's a bit of a minefield when googling php + help + system.

    Read the article

  • SQL Server 08 Express error when connecting to localhost - "Timeout expired". Works with ::1 or 127

    - by Adam A
    EDIT New info: Navigating to localhost:1434 in Chrome gives me an "ERR_EMPTY_RESPONSE", while other ports give me an "Oops! This link appears to be broken". So it seems to binding ok there? So here's my setup so far: I've configured Windows Firewall to allow TCP on 1433 and UDP on 1434. I've set up SQL Server to use any IP on Port 1433 (using the SQL Server Configuration Manager). My hosts file contains the default entries ("127.0.0.1 localhost" and "::1 localhost"). I sometimes have a debug session of Visual Web Developer running a webserver, but it's on a specific port (localhost:5XXXX). What I've tried: I CAN ping localhost in a cmd prompt. I CAN connect to the database through SSMS if I specify 127.0.0.1 or ::1 as the server name. I CAN'T connect to the database through SSMS (or ADO.NET) if I specify localhost as the server name. I've tried both Windows and SQL Authentication The error I get is the standard Can't connect to localhost. Additional Information -- Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. (Microsoft Sql Server) Other considerations: Stopping the Visual Web Developer web server from the taskbar doesn't affect the sql problem. The SQL error log says that it's listening on some piped name url at start up (I don't see how this would affect localhost but not 127.0.0.1 though). I could probably just use 127.0.0.1 everywhere, but it scares me that localhost isn't working and I'd like to figure out why. I'm not much of a networking or sql server guy so I'm stuck. If you want me to try anything to help diagnose just put it in a comment and I'll give it a go. Netstat results: Setting SDK environment relative to C:\Program Files\Microsoft SDKs\Windows\v6.1 Targeting Windows Server 2008 x86 DEBUG C:\Program Files\Microsoft SDKs\Windows\v6.1netstat -ano | findstr 1434 UDP 0.0.0.0:1434 *:* 6868 UDP [::]:1434 *:* 6868 C:\Program Files\Microsoft SDKs\Windows\v6.1netstat -ano | findstr 1433 TCP 0.0.0.0:1433 0.0.0.0:0 LISTENING 2268 TCP 127.0.0.1:1433 127.0.0.1:50758 ESTABLISHED 2268 TCP 127.0.0.1:50758 127.0.0.1:1433 ESTABLISHED 5008 TCP [::]:1433 [::]:0 LISTENING 2268 TCP [::1]:1433 [::1]:51202 ESTABLISHED 2268 TCP [::1]:1433 [::1]:51616 ESTABLISHED 2268 TCP [::1]:51202 [::1]:1433 ESTABLISHED 5008 TCP [::1]:51616 [::1]:1433 ESTABLISHED 5008 C:\Program Files\Microsoft SDKs\Windows\v6.1 SQL Server Log File: In case it helps 2010-01-30 12:58:59.01 Server Microsoft SQL Server 2008 (SP1) - 10.0.2531.0 (Intel X86) Mar 29 2009 10:27:29 Copyright (c) 1988-2008 Microsoft Corporation Express Edition on Windows NT 6.0 (Build 6002: Service Pack 2) 2010-01-30 12:58:59.01 Server (c) 2005 Microsoft Corporation. 2010-01-30 12:58:59.01 Server All rights reserved. 2010-01-30 12:58:59.01 Server Server process ID is 2268. 2010-01-30 12:58:59.01 Server System Manufacturer: 'Dell Inc.', System Model: 'Inspiron 1545'. 2010-01-30 12:58:59.01 Server Authentication mode is MIXED. 2010-01-30 12:58:59.02 Server Logging SQL Server messages in file 'c:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\Log\ERRORLOG'. 2010-01-30 12:58:59.02 Server This instance of SQL Server last reported using a process ID of 7396 at 1/30/2010 12:57:38 PM (local) 1/30/2010 5:57:38 PM (UTC). This is an informational message only; no user action is required. 2010-01-30 12:58:59.02 Server Registry startup parameters: -d c:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\DATA\master.mdf -e c:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\Log\ERRORLOG -l c:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\DATA\mastlog.ldf 2010-01-30 12:58:59.02 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required. 2010-01-30 12:58:59.02 Server Detected 2 CPUs. This is an informational message; no user action is required. 2010-01-30 12:58:59.08 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required. 2010-01-30 12:58:59.17 Server Node configuration: node 0: CPU mask: 0x00000003 Active CPU mask: 0x00000003. This message provides a description of the NUMA configuration for this computer. This is an informational message only. No user action is required. 2010-01-30 12:58:59.30 spid7s Starting up database 'master'. 2010-01-30 12:58:59.41 spid7s Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required. 2010-01-30 12:58:59.67 spid7s FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'SQLEXPRESS'. 2010-01-30 12:58:59.92 spid7s SQL Trace ID 1 was started by login "sa". 2010-01-30 12:58:59.94 spid7s Starting up database 'mssqlsystemresource'. 2010-01-30 12:58:59.95 spid7s The resource database build version is 10.00.2531. This is an informational message only. No user action is required. 2010-01-30 12:59:00.82 spid7s Server name is 'DELL\SQLEXPRESS'. This is an informational message only. No user action is required. 2010-01-30 12:59:00.83 Server A self-generated certificate was successfully loaded for encryption. 2010-01-30 12:59:00.84 Server Server is listening on [ 'any' 1433]. 2010-01-30 12:59:00.84 Server Server is listening on [ 'any' 1433]. 2010-01-30 12:59:00.84 spid10s Starting up database 'model'. 2010-01-30 12:59:00.85 Server Server local connection provider is ready to accept connection on [ \\.\pipe\SQLLocal\SQLEXPRESS ]. 2010-01-30 12:59:00.86 Server Server local connection provider is ready to accept connection on [ \\.\pipe\MSSQL$SQLEXPRESS\sql\query ]. 2010-01-30 12:59:00.86 Server Dedicated administrator connection support was not started because it is disabled on this edition of SQL Server. If you want to use a dedicated administrator connection, restart SQL Server using the trace flag 7806. This is an informational message only. No user action is required. 2010-01-30 12:59:00.87 Server The SQL Server Network Interface library could not register the Service Principal Name (SPN) for the SQL Server service. Error: 0x54b, state: 3. Failure to register an SPN may cause integrated authentication to fall back to NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies. 2010-01-30 12:59:00.87 spid7s Informational: No full-text supported languages found. 2010-01-30 12:59:00.87 Server SQL Server is now ready for client connections. This is an informational message; no user action is required. 2010-01-30 12:59:00.91 spid7s Starting up database 'msdb'. 2010-01-30 12:59:01.21 spid10s Clearing tempdb database. 2010-01-30 12:59:02.78 spid10s Starting up database 'tempdb'. 2010-01-30 12:59:03.30 spid13s The Service Broker protocol transport is disabled or not configured. 2010-01-30 12:59:03.30 spid13s The Database Mirroring protocol transport is disabled or not configured. 2010-01-30 12:59:03.31 spid7s Recovery is complete. This is an informational message only. No user action is required. 2010-01-30 12:59:03.31 spid13s Service Broker manager has started.

    Read the article

  • JDBC: What is the correct JDBC URL to connect to a RAC database

    - by Vinnie
    Hi, We were connecting to Oracle from our code with a simple (custom) JDBC connector class. This class reads the connection properties from a resource file and tries to make a connection to Oracle (thin connection). However, recently the database have moved to a RAC and now the application is unable to connect to the DB. Here is the TNSPING output: Used LDAP adapter to resolve the alias Attempting to contact (DESCRIPTION=(ADDRESS_LIST=(LOAD_BALANCE=OFF)(FAILOVER=ON) (ADDRESS=(PROTOCOL=TCP)(HOST=tst-db1.myco.com)(PORT=1604)) (ADDRESS=(PROTOCOL=TCP)(HOST=tst-db2.myco.com)(PORT=1604)))(CONNECT_DATA= SERVICE_NAME=mydb1.myco.com)(SERVER=DEDICATED))) OK (80 msec) What would be the correct URL to specify in this case. Regards, Ashish

    Read the article

  • Memory leak issue with UIImagePickerController

    - by Mustafa
    I'm getting memory leak with UIImagePickerController class. Here's how I'm using it: UIImagePickerController *picker = [[UIImagePickerController alloc] init]; picker.delegate = self; picker.sourceType = UIImagePickerControllerSourceTypePhotoLibrary; [self presentModalViewController:picker animated:YES]; [picker release]; To remove the picker i call [picker dismissModalViewControllerAnimated:YES]; in didFinishPickingImage and imagePickerControllerDidCancel. -- Instruments show around 160bytes leaking as a result of this instruction: +[UIImagePickerController _loadPhotoLibraryIfNecessary] Apparently this issue has and is disturbing many people, and solution to avoid this problem is to build a singleton class dedicated for picking images from library or capturing using device's build in camera. Anyone want to add something?

    Read the article

  • SQL Server 08 Express error when connecting to localhost - "Timeout expired". Works with ::1 or 127.0.0.1

    - by Adam A
    EDIT New info: Navigating to localhost:1434 in Chrome gives me an "ERR_EMPTY_RESPONSE", while other ports give me an "Oops! This link appears to be broken". So it seems to binding ok there? So here's my setup so far: I've configured Windows Firewall to allow TCP on 1433 and UDP on 1434. I've set up SQL Server to use any IP on Port 1433 (using the SQL Server Configuration Manager). My hosts file contains the default entries ("127.0.0.1 localhost" and "::1 localhost"). I sometimes have a debug session of Visual Web Developer running a webserver, but it's on a specific port (localhost:5XXXX). What I've tried: I CAN ping localhost in a cmd prompt. I CAN connect to the database through SSMS if I specify 127.0.0.1 or ::1 as the server name. I CAN'T connect to the database through SSMS (or ADO.NET) if I specify localhost as the server name. I've tried both Windows and SQL Authentication The error I get is the standard Can't connect to localhost. Additional Information -- Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. (Microsoft Sql Server) Other considerations: Stopping the Visual Web Developer web server from the taskbar doesn't affect the sql problem. The SQL error log says that it's listening on some piped name url at start up (I don't see how this would affect localhost but not 127.0.0.1 though). I could probably just use 127.0.0.1 everywhere, but it scares me that localhost isn't working and I'd like to figure out why. I'm not much of a networking or sql server guy so I'm stuck. If you want me to try anything to help diagnose just put it in a comment and I'll give it a go. Netstat results: Setting SDK environment relative to C:\Program Files\Microsoft SDKs\Windows\v6.1 Targeting Windows Server 2008 x86 DEBUG C:\Program Files\Microsoft SDKs\Windows\v6.1netstat -ano | findstr 1434 UDP 0.0.0.0:1434 *:* 6868 UDP [::]:1434 *:* 6868 C:\Program Files\Microsoft SDKs\Windows\v6.1netstat -ano | findstr 1433 TCP 0.0.0.0:1433 0.0.0.0:0 LISTENING 2268 TCP 127.0.0.1:1433 127.0.0.1:50758 ESTABLISHED 2268 TCP 127.0.0.1:50758 127.0.0.1:1433 ESTABLISHED 5008 TCP [::]:1433 [::]:0 LISTENING 2268 TCP [::1]:1433 [::1]:51202 ESTABLISHED 2268 TCP [::1]:1433 [::1]:51616 ESTABLISHED 2268 TCP [::1]:51202 [::1]:1433 ESTABLISHED 5008 TCP [::1]:51616 [::1]:1433 ESTABLISHED 5008 C:\Program Files\Microsoft SDKs\Windows\v6.1 SQL Server Log File: In case it helps 2010-01-30 12:58:59.01 Server Microsoft SQL Server 2008 (SP1) - 10.0.2531.0 (Intel X86) Mar 29 2009 10:27:29 Copyright (c) 1988-2008 Microsoft Corporation Express Edition on Windows NT 6.0 (Build 6002: Service Pack 2) 2010-01-30 12:58:59.01 Server (c) 2005 Microsoft Corporation. 2010-01-30 12:58:59.01 Server All rights reserved. 2010-01-30 12:58:59.01 Server Server process ID is 2268. 2010-01-30 12:58:59.01 Server System Manufacturer: 'Dell Inc.', System Model: 'Inspiron 1545'. 2010-01-30 12:58:59.01 Server Authentication mode is MIXED. 2010-01-30 12:58:59.02 Server Logging SQL Server messages in file 'c:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\Log\ERRORLOG'. 2010-01-30 12:58:59.02 Server This instance of SQL Server last reported using a process ID of 7396 at 1/30/2010 12:57:38 PM (local) 1/30/2010 5:57:38 PM (UTC). This is an informational message only; no user action is required. 2010-01-30 12:58:59.02 Server Registry startup parameters: -d c:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\DATA\master.mdf -e c:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\Log\ERRORLOG -l c:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\DATA\mastlog.ldf 2010-01-30 12:58:59.02 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required. 2010-01-30 12:58:59.02 Server Detected 2 CPUs. This is an informational message; no user action is required. 2010-01-30 12:58:59.08 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required. 2010-01-30 12:58:59.17 Server Node configuration: node 0: CPU mask: 0x00000003 Active CPU mask: 0x00000003. This message provides a description of the NUMA configuration for this computer. This is an informational message only. No user action is required. 2010-01-30 12:58:59.30 spid7s Starting up database 'master'. 2010-01-30 12:58:59.41 spid7s Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required. 2010-01-30 12:58:59.67 spid7s FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'SQLEXPRESS'. 2010-01-30 12:58:59.92 spid7s SQL Trace ID 1 was started by login "sa". 2010-01-30 12:58:59.94 spid7s Starting up database 'mssqlsystemresource'. 2010-01-30 12:58:59.95 spid7s The resource database build version is 10.00.2531. This is an informational message only. No user action is required. 2010-01-30 12:59:00.82 spid7s Server name is 'DELL\SQLEXPRESS'. This is an informational message only. No user action is required. 2010-01-30 12:59:00.83 Server A self-generated certificate was successfully loaded for encryption. 2010-01-30 12:59:00.84 Server Server is listening on [ 'any' 1433]. 2010-01-30 12:59:00.84 Server Server is listening on [ 'any' 1433]. 2010-01-30 12:59:00.84 spid10s Starting up database 'model'. 2010-01-30 12:59:00.85 Server Server local connection provider is ready to accept connection on [ \\.\pipe\SQLLocal\SQLEXPRESS ]. 2010-01-30 12:59:00.86 Server Server local connection provider is ready to accept connection on [ \\.\pipe\MSSQL$SQLEXPRESS\sql\query ]. 2010-01-30 12:59:00.86 Server Dedicated administrator connection support was not started because it is disabled on this edition of SQL Server. If you want to use a dedicated administrator connection, restart SQL Server using the trace flag 7806. This is an informational message only. No user action is required. 2010-01-30 12:59:00.87 Server The SQL Server Network Interface library could not register the Service Principal Name (SPN) for the SQL Server service. Error: 0x54b, state: 3. Failure to register an SPN may cause integrated authentication to fall back to NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies. 2010-01-30 12:59:00.87 spid7s Informational: No full-text supported languages found. 2010-01-30 12:59:00.87 Server SQL Server is now ready for client connections. This is an informational message; no user action is required. 2010-01-30 12:59:00.91 spid7s Starting up database 'msdb'. 2010-01-30 12:59:01.21 spid10s Clearing tempdb database. 2010-01-30 12:59:02.78 spid10s Starting up database 'tempdb'. 2010-01-30 12:59:03.30 spid13s The Service Broker protocol transport is disabled or not configured. 2010-01-30 12:59:03.30 spid13s The Database Mirroring protocol transport is disabled or not configured. 2010-01-30 12:59:03.31 spid7s Recovery is complete. This is an informational message only. No user action is required. 2010-01-30 12:59:03.31 spid13s Service Broker manager has started.

    Read the article

  • Getting into a technology which requires experience when you have no experience

    - by dotnetdev
    It seems that Sharepoint is a technology which is very hard to get into. All the jobs in this tech require experience in working with it (Eg 2 years development experience in MOSS). If I wanted to get into this - but had no job that used the tech, how can I get experience in it to get an experienced job? Jobs state you need "2 years professional experience in MOSS 2007" but then if you have never done it, you won't get the job. The only possible way is you will be doing this at home and not in a team, but if you work in the mean time, that will negate this (it's not like teamworking is tech specific). Many people think if you decide to make a project at home you're just going to play about aimlessly rather than work to specs (where as in my current situation it's vice versa) but if you're dedicated, like me, you would write them - just not with the same presentation. Would employers treat experience at home as professional experience? Biztalk is another prime example of this. Thanks

    Read the article

  • how to get 12 for joel test working in a small team of 3-4 on php website?

    - by keisimone
    Hi i read this inspired, i am asking for specific help to achieve a 12 for my current project. i am working in a team of 3-4 on a php project that is based on cakephp. i only have a dedicated server running on linux which i intend to have the website live on. and i have a plan with assembla where i am using its svn repository. that's it. i like to hear a major, impactful step towards answering each point raised by the joel test. by impactful i mean doing just this one thing would raise my project to scoring or close to scoring on that area of the joel test. lets begin: 1) do you have a source control system? I am very proud to say learning how to use svn even though we know nuts about branch/release policies made the biggest impact to our programming lives. and the svn repos is on assembla paid plan. Feel free to add if anyone thinks we can do more in this area. 2) Can you make a build in one step? i think the issue is how do i define as a build? i think we are going to define it as if tomorrow my dedicated server crashed and we found another server from another normal hosting provider and all my team's machines all destroyed, how are we going to get the website up again? my code is in svn on assembla. 1 step means as close to 1 button to push as possible. 3)Do you make daily builds? i know nothing about this. please help. i googled and came across this phpundercontrol. but i am not sure if we can get that to work with assembla. are there easier ways? 4)Do you have a bug database? we have not used the assembla features on bug tracking. ashamed to say. i think i will sort this out myself. 5)Do you fix bugs before writing new code? policy issue. i will sort it out myself. 6)Do you have an up-to-date schedule? Working on it. Same as above. estimates have historically been overly optimistic. having spent too much time using all sorts of funny project management tools, i think this time i am going to use just paper and pen. please dont tell me scrum. i need to keep things even simpler than that. 7)Do you have a spec? We do, but its in paper and pen. what would be a good template? 8)Do programmers have quiet working conditions? Well we work at home and in distributed manner. so .. 9)Do you use the best tools money can buy? We use cheap tools. we are not big. 10)Do you have testers? NO testers. Since we have a team of 3, i think i should go get 1 tester. even on a part time basis. so i should get this 1 part time tester test in what manner to extract maximum effects? should i get him to write out the test scenarios and expected outcomes and then test it? or i write the test scenarios and then ask him to do it? we will be writing the test cases ourselves using simpletest. i came across selenium. how useful is that? 11)Do new candidates write code during their interview? Not applicable. But i will do it next time i try to hire anyone else. hires or contractors alike. 12)Do you do hallway usability testing? Will do so on a per month or per milestone basis. i will grab my friends who are not net-savvy. they will be the best testers of this type. Thank you.

    Read the article

  • apt-get update mdadm scary warnings

    - by user568829
    Just ran an apt-get update on one of my dedicated servers to be left with a relatively scary warning: Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-2.6.26-2-686-bigmem W: mdadm: the array /dev/md/1 with UUID c622dd79:496607cf:c230666b:5103eba0 W: mdadm: is currently active, but it is not listed in mdadm.conf. if W: mdadm: it is needed for boot, then YOUR SYSTEM IS NOW UNBOOTABLE! W: mdadm: please inspect the output of /usr/share/mdadm/mkconf, compare W: mdadm: it to /etc/mdadm/mdadm.conf, and make the necessary changes. W: mdadm: the array /dev/md/2 with UUID 24120323:8c54087c:c230666b:5103eba0 W: mdadm: is currently active, but it is not listed in mdadm.conf. if W: mdadm: it is needed for boot, then YOUR SYSTEM IS NOW UNBOOTABLE! W: mdadm: please inspect the output of /usr/share/mdadm/mkconf, compare W: mdadm: it to /etc/mdadm/mdadm.conf, and make the necessary changes. W: mdadm: the array /dev/md/6 with UUID eef74de5:9267b2a1:c230666b:5103eba0 W: mdadm: is currently active, but it is not listed in mdadm.conf. if W: mdadm: it is needed for boot, then YOUR SYSTEM IS NOW UNBOOTABLE! W: mdadm: please inspect the output of /usr/share/mdadm/mkconf, compare W: mdadm: it to /etc/mdadm/mdadm.conf, and make the necessary changes. W: mdadm: the array /dev/md/5 with UUID 5d45b20c:04d8138f:c230666b:5103eba0 W: mdadm: is currently active, but it is not listed in mdadm.conf. if W: mdadm: it is needed for boot, then YOUR SYSTEM IS NOW UNBOOTABLE! W: mdadm: please inspect the output of /usr/share/mdadm/mkconf, compare W: mdadm: it to /etc/mdadm/mdadm.conf, and make the necessary changes. As instructed I inspected the output of /usr/share/mdadm/mkconf and compared with /etc/mdadm/mdadm.conf and they are quite different. Here is the /etc/mdadm/mdadm.conf contents: # mdadm.conf # # Please refer to mdadm.conf(5) for information about this file. # # by default, scan all partitions (/proc/partitions) for MD superblocks. # alternatively, specify devices to scan, using wildcards if desired. DEVICE partitions # auto-create devices with Debian standard permissions CREATE owner=root group=disk mode=0660 auto=yes # automatically tag new arrays as belonging to the local system HOMEHOST <system> # instruct the monitoring daemon where to send mail alerts MAILADDR root # definitions of existing MD arrays ARRAY /dev/md0 level=raid1 num-devices=2 UUID=b93b0b87:5f7c2c46:0043fca9:4026c400 ARRAY /dev/md1 level=raid1 num-devices=2 UUID=c0fa8842:e214fb1a:fad8a3a2:28f2aabc ARRAY /dev/md2 level=raid1 num-devices=2 UUID=cdc2a9a9:63bbda21:f55e806c:a5371897 ARRAY /dev/md3 level=raid1 num-devices=2 UUID=eca75495:9c9ce18c:d2bac587:f1e79d80 # This file was auto-generated on Wed, 04 Nov 2009 11:32:16 +0100 # by mkconf $Id$ And here is the out put from /usr/share/mdadm/mkconf # mdadm.conf # # Please refer to mdadm.conf(5) for information about this file. # # by default, scan all partitions (/proc/partitions) for MD superblocks. # alternatively, specify devices to scan, using wildcards if desired. DEVICE partitions # auto-create devices with Debian standard permissions CREATE owner=root group=disk mode=0660 auto=yes # automatically tag new arrays as belonging to the local system HOMEHOST <system> # instruct the monitoring daemon where to send mail alerts MAILADDR root # definitions of existing MD arrays ARRAY /dev/md1 UUID=c622dd79:496607cf:c230666b:5103eba0 ARRAY /dev/md2 UUID=24120323:8c54087c:c230666b:5103eba0 ARRAY /dev/md5 UUID=5d45b20c:04d8138f:c230666b:5103eba0 ARRAY /dev/md6 UUID=eef74de5:9267b2a1:c230666b:5103eba0 # This configuration was auto-generated on Sat, 25 Feb 2012 13:10:00 +1030 # by mkconf 3.1.4-1+8efb9d1+squeeze1 As I understand it I need to replace the four lines that start with 'ARRAY' in the /etc/mdadm/mdadm.conf file with the different four 'ARRAY' lines from the /usr/share/mdadm/mkconf output. When I did this and then ran update-initramfs -u there were no more warnings. Is what I have done above correct? I am now terrified of rebooting the server for fear it will not reboot and being a remote dedicated server this would certainly mean downtime and possibly would be expensive to get running again. FOLLOW UP (response to question): the output from mount: /dev/md1 on / type ext3 (rw,usrquota,grpquota) tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) udev on /dev type tmpfs (rw,mode=0755) tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620) /dev/md2 on /boot type ext2 (rw) /dev/md5 on /tmp type ext3 (rw) /dev/md6 on /home type ext3 (rw,usrquota,grpquota) mdadm --detail /dev/md0 mdadm: md device /dev/md0 does not appear to be active. mdadm --detail /dev/md1 /dev/md1: Version : 0.90 Creation Time : Sun Aug 14 09:43:08 2011 Raid Level : raid1 Array Size : 31463232 (30.01 GiB 32.22 GB) Used Dev Size : 31463232 (30.01 GiB 32.22 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 1 Persistence : Superblock is persistent Update Time : Sat Feb 25 14:03:47 2012 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : c622dd79:496607cf:c230666b:5103eba0 Events : 0.24 Number Major Minor RaidDevice State 0 8 1 0 active sync /dev/sda1 1 8 17 1 active sync /dev/sdb1 mdadm --detail /dev/md2 /dev/md2: Version : 0.90 Creation Time : Sun Aug 14 09:43:09 2011 Raid Level : raid1 Array Size : 104320 (101.89 MiB 106.82 MB) Used Dev Size : 104320 (101.89 MiB 106.82 MB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Sat Feb 25 13:20:20 2012 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : 24120323:8c54087c:c230666b:5103eba0 Events : 0.30 Number Major Minor RaidDevice State 0 8 2 0 active sync /dev/sda2 1 8 18 1 active sync /dev/sdb2 mdadm --detail /dev/md3 mdadm: md device /dev/md3 does not appear to be active. mdadm --detail /dev/md5 /dev/md5: Version : 0.90 Creation Time : Sun Aug 14 09:43:09 2011 Raid Level : raid1 Array Size : 2104448 (2.01 GiB 2.15 GB) Used Dev Size : 2104448 (2.01 GiB 2.15 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 5 Persistence : Superblock is persistent Update Time : Sat Feb 25 14:09:03 2012 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : 5d45b20c:04d8138f:c230666b:5103eba0 Events : 0.30 Number Major Minor RaidDevice State 0 8 5 0 active sync /dev/sda5 1 8 21 1 active sync /dev/sdb5 mdadm --detail /dev/md6 /dev/md6: Version : 0.90 Creation Time : Sun Aug 14 09:43:09 2011 Raid Level : raid1 Array Size : 453659456 (432.64 GiB 464.55 GB) Used Dev Size : 453659456 (432.64 GiB 464.55 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 6 Persistence : Superblock is persistent Update Time : Sat Feb 25 14:10:00 2012 State : active Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : eef74de5:9267b2a1:c230666b:5103eba0 Events : 0.31 Number Major Minor RaidDevice State 0 8 6 0 active sync /dev/sda6 1 8 22 1 active sync /dev/sdb6 FOLLOW UP 2 (response to question): Output from /etc/fstab /dev/md1 / ext3 defaults,usrquota,grpquota 1 1 devpts /dev/pts devpts mode=0620,gid=5 0 0 proc /proc proc defaults 0 0 #usbdevfs /proc/bus/usb usbdevfs noauto 0 0 /dev/cdrom /media/cdrom auto ro,noauto,user,exec 0 0 /dev/dvd /media/dvd auto ro,noauto,user,exec 0 0 # # # /dev/md2 /boot ext2 defaults 1 2 /dev/sda3 swap swap pri=42 0 0 /dev/sdb3 swap swap pri=42 0 0 /dev/md5 /tmp ext3 defaults 0 0 /dev/md6 /home ext3 defaults,usrquota,grpquota 1 2

    Read the article

  • Should we use Visual Studio 2010 for all SQL Server Database Development?

    - by Luke
    Our company currently has seven dedicated SQL Server 2008 servers each running an average of 10 databases. All databases have many stored procedures and UDFs that commonly reference other databases both on the same server and also across linked servers. We currently use SSMS for all database related administration and development but we have recently purchased Visual Studio 2010 primarily for ongoing C# WinForms and ASP.NET development. I have used VS2010 to perform schema comparisons when rolling out changes from a development server into production and I'm finding it great for this task. We would like to consider using VS2010 for all database development going forward but as far as I understand, we would have to set up ALL databases as projects because of the dependencies on linked servers etc. My question is, do you have any experience using VS2010 for database development in a similar environment? Is it easy to use in tandem with SSMS or is it a one way street once VS2010 projects have been set up for all databases? Can you make any recommendations/impart any experience with a similar scenario? Thanks, Luke

    Read the article

< Previous Page | 53 54 55 56 57 58 59 60 61 62 63 64  | Next Page >