Search Results

Search found 1777 results on 72 pages for 'digital photography'.

Page 57/72 | < Previous Page | 53 54 55 56 57 58 59 60 61 62 63 64  | Next Page >

  • KVM recommendations

    - by alex
    I recently tried out a cheaper KVM solution, a dual monitor one with a USB hub and audio/mic support. It seemed the perfect KVM. However, these are my experiences. When using my keyboard via the PS/2 connection, none of my multimedia keys work (useful, because it has a volume control and my speakers do not, only on a wireless remote control.) I plugged the keyboard in via the USB port - and it seemed to work. However, I believe to switch the hub from PC to Mac, you need to use a keyboard combo, which is only supported when the keyboard is plugged in via PS/2 Sometimes the middle mouse button doesn't work when connected via PS/2. The multi monitor is VGA - I just found out by the looks of things my Mac Mini outputs DVI Digital only (though this is my fault!). Mac works with 2 screens, but switching and switching back can cause it not to display on the 2nd screen unless I go detect displays again. My question is - is there a KVM out there that supports these features? USB keyboard and mouse inputs will full multimedia keys support Dual monitor DVI connections Hotkey to change PCs and physical button USB hub Emulate screens attached when switching to a different computer Works with PC and Mac Audio / Microphone support Does one exist, that won't cost the world? So far the only one that seems to support all this (that I can tell) is this one. UPDATE I ended up buying the Aten CS1642. It's expensive, but it seems to work great!

    Read the article

  • SATA drives or chipset throwing DRDY ERR and ICRC ABRT

    - by Matt
    I have an SD-VIA-1A2S PCI card with 2 sata ports (and one ATA-133 that isn't used). Two new Western Digital Caviar Green drives (WD10EARS 1TB) throw repeated errors in kern.log (removed date/time/host info for brevity): [ 7.376475] ata2.00: exception Emask 0x12 SAct 0x0 SErr 0x1000500 action 0x6 [ 7.376480] ata2.00: BMDMA stat 0x5 [ 7.376483] ata2: SError: { UnrecovData Proto TrStaTrns } [ 7.376489] ata2.00: cmd c8/00:40:20:00:00/00:00:00:00:00/e0 tag 0 dma 32768 in [ 7.376490] res 51/84:2f:20:00:00/00:00:00:00:00/e0 Emask 0x12 (ATA bus error) [ 7.376493] ata2.00: status: { DRDY ERR } [ 7.376495] ata2.00: error: { ICRC ABRT } [ 7.376504] ata2: hard resetting link I'm using Ubuntu 9.04 - 2.6.28-18-generic, though I have tried live cds of Ubuntu 9.10, Fedora 12 and OpenSUSE 11.2 - all running various 2.6.31 kernels - and all received the same error. Based on testing these drives and this card in two other machines and combos of connecting the drives directly to the motherboard or the add-in card, I'm relatively convinced that it's the VIA chipset that is the problem. Another computer that also has an onboard VIA SATA chipset (like the add-in card) produces the same errors when the drives are directly on that motherboard. I have been able to verify that the drives are perfectly good, and I tried everything I can think of in terms of swapping cables, psu isn't overloaded, etc. The error happens on boot once or twice, after using fdisk on the drive once or twice, and constantly when attempting to sync a new mdadm raid 1 array created on the two drives. Any thoughts on where to go from here - driver/kernel wise? I'm completely open to buying a new PCI add-in card if someone can recommend one with 2 internal sata ports that works well in Debian/Ubuntu. Thanks!

    Read the article

  • Install Ubuntu on a new netbook?

    - by torbengb
    I'm planning to buy a netbook, and I am considering to install Ubuntu on it. It would mainly be used by my wife at home for web browsing and email at home (lightweight is important, hence a netbook!), and we'd occasionally bring it along on travels (mostly as digital photo dropzone). I want to use Ubuntu instead of Windows because I'm sick of all the Windows hassle and updates. I'm not concerned about Windows applications; I'd switch to native alternatives as far as possible because really only Firefox and something like Picasa are needed. I'm considering an ASUS Eee PC 1001P or an MSI Wind U100 or an Point of View Mobii II (click the links for specs; nevermind that the rest is German). I'm not in the USA. Whatever I buy will most likely have Windows 7 on it but no optical drive. I would also buy a large-ish USB stick but not an external optical drive. Should I (and can I) install Ubuntu alongside Windows 7, or remove Windows? If I remove Windows first, how would I be able to reinstall it if I change my mind? Can I make a backup? Is a recovery CD usually provided? Should I choose the regular Ubuntu, or the Ubuntu Netbook Remix (UNR)? Does UNR allow me to install additional applications just as easily? Note: I'm asking about Ubuntu vs. Windows; let's skip the hardware discussion for now. Edit: I'm assuming that Windows is already installed; if it isn't then I would only install Ubuntu and this question is irrelevant.

    Read the article

  • External Hard Drive Won't Mount - MAC OSX

    - by dtj
    I have a Western Digital hard drive that's about 4 or 5 years old. It's 500 GB, USB. I use it to backup my Mac every so often. I had it partitioned: 1 side for full backups, and the other side for general storage of music, installers, etc. I decided to get rid of the partition today and dump all the data. So I opened disk utility, and hit 'erase'. It started thinking and then disk utility crashed. After the crash, the hard drive won't mount, however disk utility still sees the drive, but not the individual volume within. I tried booting up Disk Warrior and no luck there either. It has the drive as an "unknown drive". When I hit rebuild, it goes through all it steps and then stops cause of this error: The drive "unknown" is severely damaged and DiskWarrior is unable to determine its case sensitivity What can I do at this point? There isn't any physical damage to the drive. Never been dropped or anything.

    Read the article

  • Internal disk not correctly recognised by Windows 7

    - by david
    i'm having problems configuring a disk in a brand new, clean windows-7 install. here are some system specifics- . disk- western digital velociraptor wd6000hlhx . mobo- gigabyte z77x-ud3h . bios sata-mode set to ahci [not raid], w/disk connected to sata0 [6gb/s hi-speed sata]. . windows 7 enterprise sp1 x64 the disk is recognized by bios and correctly identified [name & size ok]. the disk is also recognized by windows on a h/w level, but it won't show up in the explorer. windows reports the device is working correctly. windows disk manager shows the drive, but says it's uninitialized and has no partitions [which is incorrect]. if i try to initialize the drive, windows throws an error saying that it "cannot find the file specified". [which file???] before connecting the drive to the new machine, i partitioned and formatted the disk under windows xp sp2, giving it 2 partitions [mbr, not gpt] and copying over a boatload of data. obviously none of this appears under windows 7. removing the disk from the new machine and replacing it back in the windows xp machine shows the disk and all data are intact and functional. i'd like to have windows 7 recognize the disk w/o having to lose the data and start over. is this possible? if so, how would i do that? I checked this post, but even though the problem seems identical, the information didn't help. any help appreciated. thanks!

    Read the article

  • Are these computer parts compatible?

    - by Jcubed
    so I'm building a computer and i want to know if all these parts are compatible. case: http://www.amazon.com/Xion-Gaming-Steel-Tower-Computer/dp/B002139YSS/ref=sr_1_1?ie=UTF8&s=electronics&qid=1270923001&sr=8-1 power supply: http://www.amazon.com/Thermaltake-W0121RU-PurePower-Version-PCI-Express/dp/B0015MCMRG/ref=sr_1_1?ie=UTF8&s=electronics&qid=1270924656&sr=1-1 motherboard: http://www.amazon.com/GIGABYTE-GA-EP45-UD3P-LGA-Intel-Motherboard/dp/tech-data/B001HH2WE2/ref=de_a_smtd processor: http://www.amazon.com/Intel-Processor-1333MHz-LGA775-BX80570E8400/dp/B00116SLYY/ref=sr_1_1?ie=UTF8&s=electronics&qid=1270924524&sr=1-1 hard drive: http://www.amazon.com/Western-Digital-Caviar-Black-WD1001FALS/dp/B001C271MA/ref=sr_1_1?ie=UTF8&s=electronics&qid=1270924586&sr=8-1 DVD/Blu Ray Dive: http://www.amazon.com/LITE-Blu-ray-Internal-Optical-iHOS104/dp/tech-data/B002EE996Q/ref=de_a_smtd Graphics Card: http://www.amazon.com/Sapphire-Radeon-100252HDMI-PCI-Express-Graphics/dp/B001SJLLTQ/ref=sr_1_1?ie=UTF8&s=electronics&qid=1270924798&sr=1-1-spell Sound Card: http://www.amazon.com/Creative-Labs-SB0570L4-Blaster-Audigy/dp/B000LP0R3E/ref=sr_1_1?ie=UTF8&s=electronics&qid=1270924850&sr=1-1 Memory: http://www.amazon.com/Corsair-TWIN2X4096-8500C5DF-Dominator-PC2-8500-1066MHz/dp/B0014Z0Q04/ref=sr_1_1?ie=UTF8&s=electronics&qid=1270924896&sr=1-1-spell OS: Ubuntu 64-bit

    Read the article

  • Boot iMac into Centos from external hard drive

    - by user1704978
    I have Centos 6.3 installed on an external Western Digital drive with Firewire and USB interfaces. I want to be able to boot an iMac (2008, 3.06GHz Core 2 Duo) from this disk. The iMac has Mac OS X 10.5.8 and also a Window XP installation. I have tried holding 'T' on bootup for target disk mode but the external disk is ignored (presumably as it's not a Mac OSX image). I created an rEFit boot DVD which when booted in CD mode (holding 'C' on startup) displays three options, Mac OS (on internal drive), Linux and Windows. Selecting the Linux option unfortunately boots the Mac into XP. Three options are only displayed when the external disk is plugged into the Firewire port. If the external disk is plugged into a USB port the Linux option is not displayed and I can only boot into Mac OS X or Windows. This external disk will happily boot a Lenovo T410 laptop into Centos. My questions are: 1) Is it actually possible to boot into Centos on an iMac with an external hard drive. If so how do I achieve this? 2) Why is rEFit apparently booting from the wrong partition?

    Read the article

  • Dual VGA monitors with Quadro FX 580?

    - by dentrasi
    I have a machine with a Quadro FX 580 card (DVI and two Displayport). Attached to it are two 19" Acer screens, which are both (annoyingly) VGA. The first one works perfectly, with a DVI-VGA adaptor. The second one doesn't work. It's got a VGA cable, which goes into a VGA-DVI converted, which then goes into a DVI-Displayport converter. Initally, I was getting 'Cable Unplugged' on the screen, and it couldn't be seen by Windows or the nVidia control panel. After swapping the VGA-DVI adaptor (which works perfectly on another machine), Windows can now see the monitor. The nVidia panel sees the model and native resolution, but I get a constant 'No Signal' error. Switching to the other Displayport makes no difference. I suspect that the card is seeing a DVI connection plugged into it (nVididaCP shows the monitor as having a DVI connection), and it only sending out a digital signal because of this. Does anyone know of a solution (other than trying to get a Displayport-VGA adaptor), or of a way to force the card to see it as VGA? Thanks, ~Dentrasi

    Read the article

  • My hard drive seems to be overheating... what should I do?

    - by George Edison
    After a cold boot, the hard drive in my notebook jumps to 56? within an hour or so of idling. Is 56? a cause for alarm? Notes: The notebook is on a flat desk and none of the vents are obstructed. The video card is currently at 55? and the CPU at 50?. It's a Western Digital 250GB hard drive. SMART reports the drive healthy but does warn that: Edit: this problem had a very surprise ending. I inverted the notebook and unscrewed some of the panels on the back (there was one covering the hard drive, and one that provided access to the memory). I couldn't see any dust, so I simply screwed everything back together and powered it on... and it worked! The temperature is now staying at 46?, and it feels notable cooler to the touch. So I can only assume that some internal fan was malfunctioning or something. Whatever the case, it's working now so I won't complain. Edit: I have an SSD now, so temperature isn't as big an issue as it was when I had a mechanical drive.

    Read the article

  • Ubuntu 12.04 - Pound Reverse Proxy and Adobe Flex/Flash Auth

    - by James
    First time posting, I have a completely fresh install of ubuntu 12.04 Client as a reverse proxy gateway to our internal network. Our setup is we have one external ip but three domains we would like to point to various webservers on our internal network. It's not so much a load balancing issue or cacheing etc. Merely routing some Client browsers to a port 80 webpage (to adhere to some stricter corporate policies regarding placing port numbers after domain names). I have gone with pound and everything seems to be working fine. Static pages load etc. Everything is good with the exception of a Flash/Flex based WebClient for a Digital Asset Management program. The actual static page loads fine, it is just at the moment of entering credentials, be they correct or incorrect, and hitting login, there is no response whatsoever. Either a rejection or confirmation etc. So the request back to the internal server can't be getting through. I have googled extensively and there might be a solution in a crossdomain.xml file? Documentation isn't very clear. And we are not the authors of the DAM app, and have no control over the code on the Flash/Flex side. Questions: Is there a particular config file/solution for pound that allows Flash/Flex auth information to be forwarded? Is there another reverse proxy program (nginx?)that allows this type of config? Am I looking at this the entire wrong way, should Flash/Flex fundamentally not be allowed to have this access?

    Read the article

  • Software for handling camera RAW-files

    - by Eikern
    I use a digital SLR as most other photographers do today and have quickly realised that capturing images using camera-RAW files is the way to go. Personally I use Adobe Lightroom to handle my photo library, but I know there are other software available like Apple Aperture. These applications are quite hard to use for a novice, and are quite expensive too. I've often recommended other photographers to switch to camera-raw, but they won't do it because Windows can't handle it natively. Are there any free or cheaper applications out there that can do simple file handling and adjustments? Preferably so simple that my mom can do it. I know Nikon offers a codec that allows you to view NEF-files natively inside Windows, but still limits the uses of the file and slows the system down if the file is big. Does anybody know of a drag-and-drop application that converts camera-raw to JPG on-the-fly? In case I or someone would need to upload an image to the web or use it inside a word-document. Thanks.

    Read the article

  • Is there a way to extract a "private certificate key" from Chrome and import it into Firefox ?

    - by user58871
    This is a classical Catch-22 situation. I was using online banking the other day under Chrome. I had to order a digital certificate so that I could extend my privileges. The stupid thing is that when I got approved and opened the certificate installation menu, I saw only versions for IE/Firefox available. What the heck, I said, and chose FF - the result I got was Error 202 - ERR:CERT:INVALID. I opened FF, got to the same page, and tried to install the damn thing from there, but got a message basically saying that I must have been given a private key which obviously FF doesn't find. I read a bit, and it turned out that I really must have been given such a key but only to the browser that I ordered the cert with, i.e. Chrome. The worst thing is that if I deactivate my order, and reissue a new cert, this time from FF, I MUST go to a bank office (!!!WTF), but I am currently studying abroad, so I can't just go back. Is there a way, that I could extract that key from Chrome's profile, and import it into FF under Windows ? I will be glad to know

    Read the article

  • Copying symbolic links and filenames with special characters to NAS

    - by Mr E
    I have a new Western Digital My Book Live NAS. I am trying to copy files from an old drive to the NAS. I'm using Ubuntu 12.04 and I've mounted the drive by browsing the network in Nautilus and choosing a shared folder configured on the NAS. The shared folder is then automatically mounted at .gvfs/files on mybooklive. There are two problems so far: File names and directory names containing certain characters (e.g. : or |). Attempting to copy these results in the error message: cp: cannot stat `/path/to/destination.filename': Invalid argument Symbolic links. In Nautilus I get the error message: Symlinks not supported by backend My questions are: Can I connect to the NAS or configure the NAS so that I can copy my files without this problem? (In case it matters, I don't need Windows compatibility.) If not, what can I do to identify all the problem files? Can I do anything to automatically fix my filenames Please let me know if any of this needs clarification. I'm not too familiar with all of this so I may have left out some useful information.

    Read the article

  • help with xorg.conf: xrandr on one of two widescreen monitors; rhel5, kde, ATI Radeon X1300

    - by user35997
    Can anyone help with me configure my dual-screen monitors for rotation? I have xrandr 1.1. Have tried various approaches, nothing takes. I can't even get the xrandr options to show up in KDE's Display control panel. Thanks1 My lspci output: 03:00.0 VGA compatible controller: ATI Technologies Inc RV516 [Radeon X1300/X1550 Series] My current xorg.conf (works, minus screen rotation): # Xorg configuration created by system-config-display Section "ServerLayout" Identifier "Multihead layout" Screen 0 "aticonfig-Screen[0]" 0 0 InputDevice "Keyboard0" "CoreKeyboard" Option "Xinerama" "off" Option "Clone" "on" EndSection Section "Files" EndSection Section "Module" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" Option "XkbModel" "pc105" Option "XkbLayout" "us" EndSection Section "Monitor" ### Comment all HorizSync and VertSync values to use DDC: Identifier "Monitor1" VendorName "Monitor Vendor" ModelName "Dell 2407WFP (Digital)" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 76.0 Option "dpms" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Device" Identifier "Videocard0" Driver "vesa" EndSection Section "Device" Identifier "Videocard1" Driver "vesa" VendorName "Videocard Vendor" BoardName "ATI Technologies Inc RV516 [Radeon X1300/X1550 Series]" BusID "PCI:3:0:0" EndSection Section "Device" Identifier "aticonfig-Device[0]" Driver "fglrx" Option "DesktopSetup" "horizontal" EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" DefaultDepth 16 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection SubSection "Display" Viewport 0 0 Depth 16 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Videocard1" Monitor "Monitor1" DefaultDepth 16 SubSection "Display" Viewport 0 0 Depth 16 Modes "1920x1200" "1280x1024" "800x600" EndSubSection EndSection Section "Screen" Identifier "aticonfig-Screen[0]" Device "aticonfig-Device[0]" Monitor "aticonfig-Monitor[0]" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 Modes "1920x1200" "1280x1024" "800x600" EndSubSection EndSection

    Read the article

  • SATA HDD not recognized by BIOS after Windows 7 reinstall

    - by RoliSoft
    I got Win32.Virut.56 virus, which is a very nasty stuff. I reinstalled my Win7, but it reappeared somehow. After hours of headache, I was able to remove it by booting into a live Ubuntu and running CureIT using Wine. I then started reinstalling Windows 7. After the "expanding files" stage it rebooted, however from that point on, my 160 GB Western Digital SATAII hard drive was not recognized. The bios just freezes at "SATAII 1: Detecting...". My other 1.5 TB Seagate SATAII hard drive works correctly. I tried switching cables; that didn't help. I googled this issue, but what came up were usually firmware problems. I can't update the firmware or do anything at all, because if I plug it in, it won't start. My motherboard is an ASRock 4Core1333-Viiv, if that helps. I'm now stuck on a live Ubuntu. I can't install Win7 on the 1.5 TB drive, because it's full of data I need. What do you think I could try to make the hdd work again? As for the moment, I don't have another computer to try if that one recognizes the hdd.

    Read the article

  • does my machine configuration make sense?

    - by user1227914
    i couldn't think of a better place to ask this question, so here it goes. we're putting together a dedicated server for a website that will initially host the web server and the mysql database. as the website grows, we'll move the database to a different server and this machine will eventually only server the actual website. so the question is ...does my configuration look okay? it's the first time i'm building a server from scratch so i want to make sure i don't combine components that don't fit or something. things like ..do the drives i picked work for the hot swap ..etc. what do you guys think? am i good to go with this configuration? :) Chassis: Supermicro SuperServer 6016T-MTHF (6x DDR3 SDRAM - ECC DIMM 240-pin, 2x LGA1366 Socket, Power Provided: 600 Watt, 4 (free) x hot-swap - 3.5") CPU: Intel BX80614E5620 Xeon E5620 Processor - 4 Core, 2.40GHz, LGA 1366, 5.86GT/s QPI 12MB Cache, 64-Bit, 80W, HyperThreading Memory: Crucial CT51272BB1339 4GB PC10600 DDR3 Memory - 1333MHz, ECC, Registered, 1x4096MB (possibly 3 or 4 of them) Hard Drives: Western Digital WD2002FAEX Caviar Black Hard Drive - 2TB, 3.5", SATA 6Gbps, 7200 RPM, 64MB (possibly 2 or 3). thank you very much for any professional advice :)

    Read the article

  • SYS-5016T-MTFB will not POST without manual assistance (Motherboard: X8STi-F)

    - by Dan
    I have a Supermicro 5016T-MTFB 1U server which I am in the process of setting up, but it has a really strange problem. When the system is powered on it will not POST until I press the reset button a few times, followed by pressing the delete key on the keyboard to "wake it up". If I power it on and do nothing, the fans spin up but nothing else happens at all. After pressing the reset button once, the red "overheat" light comes on and blinks which is supposed to indicate a fan failure - but all the fans are working. Pressing reset again usually stops the blinking, and the system starts the normal POST routine but it will not actually get to the bios screen unless I press delete. If I don't press delete, it just continues to hang. After pressing delete it will take me into the bios setup screen, if I exit without saving changes I can boot the system normally. I was able to successfully install Linux with no trouble...but upon rebooting the same problem happened again. This board has integrated IPMI which I thought was the problem, so I disabled it via the jumper on the board. Did not help. Each time this system powers on, it goes on for a second, then turns off again for another second, then turns back on again. I don't know why it does that. Here is what I put in the system: 1 x Xeon E5630 (Nehalem) 80W TDP (it's not overheating, CPU temps stay under 40 degrees C) 2 x Kingston 2GB x 3 DDR3-1066 Memory ECC, unbuffered, unregistered (kvr1066d3e7sk3/6g) 1 x Intel X25-M 160 GB 2 x Western Digital RE3 1TB

    Read the article

  • What determines what resolutions a laptop is willing to output over VGA?

    - by Joshua McKinnon
    I'm responsible for several conference rooms and have setup 1080p projectors and I provide both HDMI and VGA connectivity. HDMI for DisplayPort and Mini-DisplayPort, and VGA as a fallback, universal option. Contrary to what I expected, people seem to have much more trouble with the HDMI than VGA, so VGA gets used a lot more than you'd think (even as most workstation laptops made in the last 3-4 years have DisplayPort or Mini-DisplayPort...). Also to my surprise, VGA outputs over 1080p on a 50ft cable run with very minimal degradation on certain laptops - other laptops just don't offer 1080p as a resolution choice and top out at 1600x1200 or something else. Specific example: a ThinkPad W530 will do 1080p, a W520 won't, over VGA. (both do 1080p over displayport/mini-DP) What determines what resolutions a laptop is willing to output over VGA? I'm thinking this will come down to either a video driver that says it supports only certain resolutions for output, or limitations of the RAMDAC (which wouldn't be in play, at least DAC wise, on a digital output, but WOULD on VGA, an analog output). The basic reason for the question is that I noticed, say, a ThinkPad W520 with 1080p built in display, will output 1080p fine over DisplayPort to a 1080p projector, but will cap out at 1600x1200 (practically the same pixel count, just a little shy) on VGA. Now, this wouldn't be surprising at all except SOME laptops have no issue outputting 1080p over VGA, even with lower native resolutions. Why do I care? Well if there's some way I could enable it... for situations where my users end up using VGA anyway, it's preferable for display mirroring if they can output their laptop's native resolution, which, you guessed it, is very often 1080p on 15" models. DISCLAIMER: This is primarily a curiosity, I'm not claiming 1080p over VGA is ideal by any means, but hey, if it works. I've seen HDMI start artifacting more over same-length, same gauge cabling (up to 50' run in certain rooms). If you think this is better suited to SuperUser, please move it, but this is framed from an IT standpoint of something that affects a real pool of users in a multiple conference room, 50+ deployed laptop scenario.

    Read the article

  • Win 7 (SP1) Creationg of System Image failure... seems absurd. (0x80780119)

    - by DSKauai16
    This question seems to keep coming up in Microsoft Answers. Unfortunately, it never seems to be solved... on Microsoft Answers. Hopefully someone here will have a better idea. I'm trying to create a system image. It's not working. I have just re-installed windows as of a few hours ago. I have an admittedly older Western Digital 148 GB USB portable HDD which is not just completely empty, but I even did a long format with the NTFS file system just to be sure. The reinstallation of windows and a couple of programs take up 40 GB (seen below) When I try to create a System Image onto the USB HDD, I am told that there is not enough room. Obviously, this is wrong. The screen captures show exactly the steps that are happening to lead me to 0x80780119. I haven't done anything but put on Windows 7 (32bit; SP1) and install some programs. I haven't even done anything with them. There's almost zero in the way of data, and I checked that yes, the HDD works to accept data, send data and work with data. I've used the drive successfully for a long, long time. What's going wrong?

    Read the article

  • New Dvds with 99 Title tracks, which one is the correct track?

    - by Mike Fielden
    I have embarked on the task of backing up my DVD collection. I have noticed that some of the newer movies I am attempting to rip contain 99 Title tracks all with approximately equal overall run times. I use MacTheRipper to rip the DVDs and Handbrake to encode them. My question is, is there a site somewhere that has information regarding which Title track to select? Disclaimer: I cannot stress this enough, I legally own these DVDs. I am merely making a digital copy. Two examples of such DVDs are Star Trek and Carriers. UPDATE: Just an FYI each most of these 99 tracks appear to be the full length tracks. There times look to be very similar to the overall movie run time (within a few seconds of each other). So using the time isn't a valid way to tell which is the correct track. Opening the movie with VLC seems to be the best way to tell. Thank you all.

    Read the article

  • How to find out which program a default beep is coming from in Windows 7?

    - by leeand00
    There's a "default beep" (as defined in System Sounds) that emanates from my computer every so often. It kind of goes like this (where each number is a "default beep" sound): 1, 2, 3, 4, 5. So there's a distinct pattern to it. I thought I had this figured out a way to figure out what was happening by going to Control Panel-Ease of Access-Ease of Access Center-Replace sounds with visual cues But that just isn't the case. Whichever window I click on, that one displays the visual queue when this happens. It's driving me crazy, and I can't figure out which program is causing this. Update: it appears to only happen on one user profile on the computer...does that help? Update 2: Discovered that this sound was coming from a utility on my laptop called ASUS NB Probe; I'm certain that it is emanating from this program because the error message displayed by it changes in sync with the sound playing. Apparently the S.M.A.R.T. feature of my hard drive was reporting an issue. It displays the issue for a brief second and then makes it disappear, I'll have to keep watching it to see what it says, but I believe is says something about a read. I have an external hdd connected with eSATA to a container of sorts (BlacX) that you can plug two hdds into. I have one hdd attached and it's a Western Digital WD1001FALS - 00E8B0 Thanks again! Now I'm off to go around the Internet and report on this...since I posted it so many places!

    Read the article

  • Why are FMS logs filled with 'play' event status code 408 for a failed webcast?

    - by Stu Thompson
    Recently we had a live webcast event go horribly wrong. I'm doing the technical post-mortem, with limited information. We know that the hardware encoder (a Digital Rapid Touch Stream Web HDI) was unable to send upstream at a sustained reliable high rate. What we don't know is if the encoder's connection was problematic (Zürich), or that of the streaming server (in Frankfurt). Unfortunately, I've got three different vendors all blaming each other (the CDN who runs the server, the on-site ISP and the on-site encoding team.) In the FMS log files I see a couple of interesting things: Zillions of Status Code 408 on play event entries for clients. Adobe's documentation stats that this "Stream stopped because client disconnected". ("Zillions" would be a ratio of 10 events for every individual IP address.) Several unpublish / (re)publish events per hour for the encoder I'd like to know if all those 408s could tell me with authority that the FMS server was starved for bandwidth, or that the encoding signal was starved (and hence the server was disconnecting clients.) Any clues?

    Read the article

  • Robocopy launches and then hangs/just sits there

    - by NateO
    I'm setting up an archive process to store old files on an external hard drive. The computer in question is running Windows 7 Pro 32bit. We have a server folder with 150,000+ files in it, most of which are pretty small (below 200k). I'm trying to use robocopy in a batch file to do this. It was working fine the other day, now all it does upon launch is sit there. It shows me all the options and whatnot, and also lists the number of files in the directory and the directory itself, but it never gets past that line. If I switch the destination to the local C drive, it eventually starts copying files. Is there something in my batch file that needs to change? Or could there be a problem with the external Western Digital drive that I'm using? The WD drive currently is holding about 175,000 files. Here is the one line batch file I have: robocopy "\\cgifp01\Prepress\Public\ImportedPDF" "E:\OldFiles" *.* /R:2 /W:10 /MINAGE:15 /MOV /B /XJ /XF "blank_test.pdf" Thanks for any tips or ideas. Nate

    Read the article

  • Portable USB drives hidden pertition - New request

    - by ZXC
    This question was made by Francesco on Jul 29 '11 at 17:14. and the replies were not satisfactory due they not point to an important problem that´s: Why could anyone want to make certain data only accesible for a program but not to the users?. For example: If I want to do a safe distribution of original music for demostration purposes I will need several requisites: 1) The music should be heard using a simple procedure like selecting the name of each song on a playlist of a mediaplayer. 2) The portable media, ussually a portable USB drive, must hide for complete and should make unaccesible the files that contain the audio data to anything but the mediaplayer, that must be in the first partition, the one that is visible. 3) Considering that´s impossible to really hide files in a non-hidden partition, a second hidden partition should be created in the USB drive and the audio data will be stored there. 4) The trick is to read the audio data files stored in the hidden partition with a mediaplayer stored in the visible partition, the media player also should be a complete standalone program and independent from any library of the operating system except of the OS audio system. 5) The hidden partition should have a copy protection scheme that could impede to do copies of the data or create working ISO images of it. I know that this description could not be technically accurate but it has a complete logic from the needs of a music producer against the problem of piracy. The philosophy that surrounds the concept is to transform a virtual object like a digital string of audio in a solid object like the analog vinyl discs are.

    Read the article

  • Force spin-down of external hard-drive on linux (raspberry pi)

    - by user258346
    I'm currently setting up a home-server using a Raspberry Pi with an external hard-disk connected via usb. However, my hard-drive will never spin down when being idle. I tried already the hints provided at raspberrypi.org ... without any success. 1.) sudo hdparm -S5 /dev/sda returns /dev/sda: setting standby to 5 (25 seconds) SG_IO: bad/missing sense data, sb[]: 70 00 04 00 00 00 00 0a 00 00 00 00 44 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2.) sudo hdparm -y /dev/sda returns /dev/sda: issuing standby command SG_IO: bad/missing sense data, sb[]: 70 00 04 00 00 00 00 0a 00 00 00 00 44 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ...and 3.) sudo sdparm --flexible --command=stop /dev/sda returns /dev/sda: HDD 1234 ... without spin-down of the drive. I use the following hardware: Inateck FDU3C-2 dual Ports USB 3.0 HDD docking station Western Digital WD10EZRX Green 1TB Is it possible, that the sent spin-down-signals are somewhere overwritten/lost/ignored?

    Read the article

< Previous Page | 53 54 55 56 57 58 59 60 61 62 63 64  | Next Page >