Search Results

Search found 13584 results on 544 pages for 'digital root'.

Page 57/544 | < Previous Page | 53 54 55 56 57 58 59 60 61 62 63 64  | Next Page >

  • DVD wont mount Ubuntu 12.04

    - by CyborgGold
    I can't seem to be able to mount my optical drive. I have tried numerous solutions from this site with no results. I am not able to see the device inside the file browser either. There is a DVD in the drive. I am running 12.04 on an HP g60-235dx portable. I have a link below to the specs. I will also list what I have tried (that I can find back right now.) I know the drive is functioning, because just before Windows 7 crashed and my MBR went fubar I was watching movies just fine. I am fairly new to linux, so don't assume I know anything. Ok, so here is what I have tried: sudo wget --output-document=/etc/apt/sources.list.d/medibuntu.list http://www.medibuntu.org/sources.list.d/$(lsb_release -cs).list sudo apt-get --quiet update sudo apt-get --yes --quiet --allow-unauthenticated install medibuntu-keyring sudo apt-get --quiet update sudo apt-get install libdvdcss2 dmesg | grep sr0 (no output) apt-get install libdvdnav4 (already installed, and up to date) sudo /usr/share/doc/libdvdread4/install-css.sh ls -l /dev/cdrom /dev/cdrw /dev/dvd /dev/dvdrw /dev/scd0 /dev/sr0 ls: cannot access /dev/scd0: No such file or directory lrwxrwxrwx 1 root root 3 Sep 10 03:51 /dev/cdrom -> sr0 lrwxrwxrwx 1 root root 3 Sep 10 03:51 /dev/cdrw -> sr0 lrwxrwxrwx 1 root root 3 Sep 10 03:51 /dev/dvd -> sr0 lrwxrwxrwx 1 root root 3 Sep 10 03:51 /dev/dvdrw -> sr0 brw-rw----+ 1 root cdrom 11, 0 Sep 10 03:51 /dev/sr0 wodim --devices wodim: Overview of accessible drives (1 found) : ------------------------------------------------------------------------- 0 dev='/dev/sg1' rwrw-- : 'TSSTcorp' 'CDDVDW TS-L633M' ------------------------------------------------------------------------- sudo lshw optical *-cdrom description: DVD-RAM writer product: CDDVDW TS-L633M vendor: TSSTcorp physical id: 1 bus info: scsi@1:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/sr0 version: 0200 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc sudo lshw | grep cdrom *-cdrom logical name: /dev/cdrom Spec sheet for portable: http://www.cnet.com/laptops/hp-g60-235dx/4507-3121_7-33496192.html If you need any more information than all of that... please let me know.

    Read the article

  • Dell XPS 15 (L502x) sound problem

    - by lauramolenaar
    I have a problem with my sound on my Dell XPS 15. First, when I had Windows 7, my sound was pretty good (I have a JBL 2.1 speaker system with Waves Maxx audio), but since I installed Ubuntu 12.04 it sounded very cheap and as if I put my laptop in a tin can. I've already tried installing alsa-hda-dkms from the alsa-daily ppa (http://ppa.launchpad.net/ubuntu-audio-dev/alsa-daily) This is my audio controller: laura@laura-XPS-L502X:~$ lspci -v | grep -A7 -i audio 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) Subsystem: Dell Device 04b6 Flags: bus master, fast devsel, latency 0, IRQ 51 Memory at f1c00000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel I hope you can help me, and you can always ask me for more information. Result of aplay -l: **** List of PLAYBACK Hardware Devices **** card 0: PCH [HDA Intel PCH], device 0: ALC665 Analog [ALC665 Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 1: ALC665 Digital [ALC665 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 Result of aplay -L: default Playback/recording through the PulseAudio sound server sysdefault:CARD=PCH HDA Intel PCH, ALC665 Analog Default Audio Device front:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Analog Front speakers surround40:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Digital IEC958 (S/PDIF) Digital Audio Output hdmi:CARD=PCH,DEV=0 HDA Intel PCH, HDMI 0 HDMI Audio Output dmix:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Analog Direct sample mixing device dmix:CARD=PCH,DEV=1 HDA Intel PCH, ALC665 Digital Direct sample mixing device dmix:CARD=PCH,DEV=3 HDA Intel PCH, HDMI 0 Direct sample mixing device dsnoop:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Analog Direct sample snooping device dsnoop:CARD=PCH,DEV=1 HDA Intel PCH, ALC665 Digital Direct sample snooping device dsnoop:CARD=PCH,DEV=3 HDA Intel PCH, HDMI 0 Direct sample snooping device hw:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Analog Direct hardware device without any conversions hw:CARD=PCH,DEV=1 HDA Intel PCH, ALC665 Digital Direct hardware device without any conversions hw:CARD=PCH,DEV=3 HDA Intel PCH, HDMI 0 Direct hardware device without any conversions plughw:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Analog Hardware device with all software conversions plughw:CARD=PCH,DEV=1 HDA Intel PCH, ALC665 Digital Hardware device with all software conversions plughw:CARD=PCH,DEV=3 HDA Intel PCH, HDMI 0 Hardware device with all software conversions

    Read the article

  • how to adjust the size of the root partition on live arch linux system (/dev/mapper/arch_root-image)

    - by leon
    Summary: I created a bootable usb drive with a live Bridge linux (ARCH based) on it. Everything works fine. The live system mounts a device called /dev/mapper/arch_root-image as its ext4 root partition (/ mount point). The problem is that I dont know how to control the size of this partition. This is not a Bridge specific issue (also happens with Archbang) Detail: My usb drive has a dos partition table with 2 ext2 partitions $ fdisk -l /dev/sdb Disk /dev/sdb: 29,8 GiB, 32006733824 bytes, 62513152 sectors Unités : secteur de 1 × 512 = 512 octets Taille de secteur (logique / physique) : 512 octets / 512 octets taille d'E/S (minimale / optimale) : 512 octets / 512 octets Type d'étiquette de disque : dos Identifiant de disque : 0x0007b7e2 Périphérique Amorçage Début Fin Blocs Id Système /dev/sdb1 * 2048 2002943 1000448 83 Linux /dev/sdb2 2002944 32258047 15127552 83 Linux sdb1 is approx 1GB and sdb2 is 14GB. The live system is on sdb1. sdb2 is empty. Now when I boot the live system, its filesystem looks like this: $ mount proc on /proc type proc (rw,nosuid,nodev,noexec,relatime) sys on /sys type sysfs (rw,nosuid,nodev,noexec,relatime) dev on /dev type devtmpfs (rw,nosuid,relatime,size=505272k,nr_inodes=126318,mode=755) run on /run type tmpfs (rw,nosuid,nodev,relatime,mode=755) /dev/sda1 on /run/archiso/bootmnt type ext2 (ro,relatime) cowspace on /run/archiso/cowspace type tmpfs (rw,relatime,size=772468k,mode=755) /dev/loop0 on /run/archiso/sfs/root-image type squashfs (ro,relatime) /dev/mapper/arch_root-image on / type ext4 (rw,relatime) securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime) tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev) devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000) tmpfs on /sys/fs/cgroup type tmpfs (rw,nosuid,nodev,noexec,mode=755) cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/usr/lib/systemd/systemd-cgroups-agent,name=systemd) pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime) cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset) cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpuacct,cpu) cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory) cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices) cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer) cgroup on /sys/fs/cgroup/net_cls type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls) cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio) mqueue on /dev/mqueue type mqueue (rw,relatime) debugfs on /sys/kernel/debug type debugfs (rw,relatime) hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime) configfs on /sys/kernel/config type configfs (rw,relatime) systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=36,pgrp=1,timeout=300,minproto=5,maxproto=5,direct) tmpfs on /tmp type tmpfs (rw) tmpfs on /etc/pacman.d/gnupg type tmpfs (rw,relatime,mode=755) As we can see, the root partition is from the device /dev/mapper/arch_root-image and my problem is that the live system recognizes it as a 3.9GB drive $ df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/arch_root-image 3.9G 1.9G 2.1G 48% / dev 494M 0 494M 0% /dev run 503M 23M 481M 5% /run /dev/sda1 962M 590M 324M 65% /run/archiso/bootmnt cowspace 755M 32M 723M 5% /run/archiso/cowspace /dev/loop0 520M 520M 0 100% /run/archiso/sfs/root-image tmpfs 503M 132K 503M 1% /dev/shm tmpfs 503M 0 503M 0% /sys/fs/cgroup tmpfs 503M 360K 503M 1% /tmp tmpfs 503M 896K 503M 1% /etc/pacman.d/gnupg My question is how is this size controled? I suspect this is related to the content of the aitab file which is part of the Bridge iso image: $ cat aitab # <img> <mnt> <arch> <sfs_comp> <fs_type> <fs_size> root-image / i686 xz ext4 50% I have read https://wiki.archlinux.org/index.php/archiso#aitab but found no clue

    Read the article

  • How to install VMware tools for Ubuntu 11.04 hosted on VMware ESXi?

    - by Dmitri Toubelis
    I'm running Vmware ESX 4.1 and I have a development VM that I recently upgraded from Ubuntu 10.04 to 11.04. Then I tried to re-install VMware Tools and some of the modules gave me an error and would not compile. As a result I'm having problems with backing up this virtual machine now and I suspect VMware tools is the reason. I installed latest patches for VMware host, that included an update to VMware Tools (v8.3.7 build-381511) but I'm still getting the same error. The error I'm getting is like this: ... /tmp/vmware-root/modules/vmhgfs-only/super.c:73:4: error: unknown field \u2018clear_inode\u2019 specified in initializer make[2]: *** [/tmp/vmware-root/modules/vmhgfs-only/super.o] Error 1 make[1]: *** [_module_/tmp/vmware-root/modules/vmhgfs-only] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-2.6.38-8-generic' make: *** [vmhgfs.ko] Error 2 make: Leaving directory `/tmp/vmware-root/modules/vmhgfs-only' and also this: /tmp/vmware-root/modules/vmci-only/vmci_drv.c:91:4: error: unknown field \u2018ioctl\u2019 specified in initializer /tmp/vmware-root/modules/vmci-only/vmci_drv.c:91:4: warning: initialization from incompatible pointer type /tmp/vmware-root/modules/vmci-only/vmci_drv.c: In function \u2018vmci_init\u2019: /tmp/vmware-root/modules/vmci-only/vmci_drv.c:151:4: error: implicit declaration of function \u2018init_MUTEX\u2019 make[2]: *** [/tmp/vmware-root/modules/vmci-only/vmci_drv.o] Error 1 make[1]: *** [_module_/tmp/vmware-root/modules/vmci-only] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-2.6.38-8-generic' make: *** [vmci.ko] Error 2 make: Leaving directory `/tmp/vmware-root/modules/vmci-only' Any ideas?

    Read the article

  • What used the linux memory? Low cache, low buffer, not a VM

    - by Jason
    First of all, yes, I have read LinuxAteMyRAM, which doesn't explain my situation. # free -tm total used free shared buffers cached Mem: 48149 43948 4200 0 4 75 -/+ buffers/cache: 43868 4280 Swap: 38287 0 38287 Total: 86436 43948 42488 # As shown above, the -/+ buffers/cache: line shows indicates the used memory rate is very high. However, from output of top, I don't see any process used more than 100MB of memory. So, what used the memory? PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 28078 root 18 0 327m 92m 10m S 0 0.2 0:25.06 java 31416 root 16 0 250m 28m 20m S 0 0.1 25:54.59 ResourceMonitor 21598 root -98 0 26552 25m 8316 S 0 0.1 80:49.54 had 24580 root 16 0 24152 10m 760 S 0 0.0 1:25.87 rsyncd 4956 root 16 0 62588 10m 3132 S 0 0.0 12:36.54 vxconfigd 26703 root 16 0 139m 7120 2900 S 1 0.0 4359:39 hrmonitor 21873 root 15 0 18764 4684 2152 S 0 0.0 30:07.56 MountAgent 21883 root 15 0 13736 4280 2172 S 0 0.0 25:25.09 SybaseAgent 21878 root 15 0 18548 4172 2000 S 0 0.0 52:33.46 NICAgent 21887 root 15 0 12660 4056 2168 S 0 0.0 25:07.80 SybaseBkAgent 17798 root 25 0 10652 4048 1160 S 0 0.0 0:00.04 vxconfigbackupd This is an x86_64 machine (not a common-brand server) running x84_64 Linux, not a container in a virtual machine. Kernel (uname -a): Linux 2.6.16.60-0.99.1-smp #1 SMP Fri Oct 12 14:24:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux Content of /proc/meminfo: MemTotal: 49304856 kB MemFree: 4066708 kB Buffers: 35688 kB Cached: 132588 kB SwapCached: 0 kB Active: 26536644 kB Inactive: 17296272 kB HighTotal: 0 kB HighFree: 0 kB LowTotal: 49304856 kB LowFree: 4066708 kB SwapTotal: 39206624 kB SwapFree: 39206528 kB Dirty: 200 kB Writeback: 0 kB AnonPages: 249592 kB Mapped: 52712 kB Slab: 1049464 kB CommitLimit: 63859052 kB Committed_AS: 659384 kB PageTables: 3412 kB VmallocTotal: 34359738367 kB VmallocUsed: 478420 kB VmallocChunk: 34359259695 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 Hugepagesize: 2048 kB df reports no large consumption of memory from tmpfs filesystems.

    Read the article

  • duplicity fail: not promping for password: "Running 'sftp user@host' failed"

    - by Thr4wn
    I have two linode VPS accounts and I want to back up one onto the other (the reasons are mainly for fun and to practice server administration.) the short version Duplicity isn't even asking for my password, but immediately says "invalid SSH password" (but I can ssh into the other server). why? the long version When I run duplicity /home/me scp://[email protected]//root/backup I get Invalid SSH password Running 'sftp [email protected]' failed (attempt #1) Invalid SSH password Running 'sftp [email protected]' failed (attempt #2) Invalid SSH password Running 'sftp [email protected]' failed (attempt #3) And it says Invalid SSH password immediately with no opportunity for me to actually type the password. When I type duplicity full -v9 --num-retries 4 /home/me scp://[email protected]//root/backup I get Main action: full Running 'sftp [email protected]' (attempt #1) State = sftp, Before = 'Connecting to 97.107.129.67... [email protected]'s' State = sftp, Before = '' Invalid SSH password Running 'sftp [email protected]' failed (attempt #1) I can ssh into [email protected] fine, and in fact have the ip in known_hosts before I tried any of this. serer 1 (from which I'm running the duplicity command) is Linode's default Ubuntu 8 setup with only a handful of programs installed via apt-get. server 2 (represented by x.x.x.x) is literally only Linode's default Ubuntu 8 setup I previously tried using SystemImager -- would that have changed settings in a destructive way? (I have removed and rebooted since then) Isn't Duplicity supposed to prompt for password? Am I using it wrong? are there common mistakes/dependencies I need to know about? Is there any way that x.x.x.x could be setup that could make this not work (I used Linode's default Ubuntu 8 setup and barely )?

    Read the article

  • How to stop Cron from sending messages about errors

    - by Beck
    I have this strange mails comming from cron: Return-Path: <[email protected]> Delivered-To: [email protected] Received: by domain.com (Postfix, from userid 0) id 6F944264D0; Mon, 10 Jan 2011 10:35:01 +0000 (UTC) From: [email protected] (Cron Daemon) To: [email protected] Subject: Cron <root@domain> lynx -dump http://www.domain.com/cron/realqueue Content-Type: text/plain; charset=ANSI_X3.4-1968 X-Cron-Env: <SHELL=/bin/sh> X-Cron-Env: <PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin> X-Cron-Env: <HOME=/root> X-Cron-Env: <LOGNAME=root> Message-Id: <[email protected]> Date: Mon, 10 Jan 2011 10:35:01 +0000 (UTC) /bin/sh: lynx: not found I have this cron settings in crontab file: SHELL=/bin/sh PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin */5 * * * * lynx -dump http://www.domain.com/cron/realqueue 17 * * * * root cd / && run-parts --report /etc/cron.hourly 25 6 * * * root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.daily ) 47 6 * * 7 root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.weekly ) 52 6 1 * * root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.monthly ) Lynx is installed on my Ubuntu as well. Ofc in place of domain.com is my domain, just replaced. Thanks ;)

    Read the article

  • Identifying Httpd error log in Fedora 16

    - by Cerin
    How do you find the cause of httpd errors in Fedora 16? The new systemctl command in Fedora 16 seems to horribly obscure any useful logging info. [root@host ~]# systemctl start httpd.service Job failed. See system logs and 'systemctl status' for details. [root@host ~]# systemctl status httpd.service httpd.service - The Apache HTTP Server (prefork MPM) Loaded: loaded (/lib/systemd/system/httpd.service; enabled) Active: failed since Thu, 21 Jun 2012 16:26:56 -0400; 1min 23s ago Process: 2119 ExecStop=/usr/sbin/httpd $OPTIONS -k stop (code=exited, status=0/SUCCESS) Process: 2215 ExecStart=/usr/sbin/httpd $OPTIONS -k start (code=exited, status=1/FAILURE) Main PID: 1062 (code=exited, status=0/SUCCESS) CGroup: name=systemd:/system/httpd.service So the first command fails...and it tells me to run another command...which simply tells me that the command returned an error code. Where's the actual error? Even more frustrating is nothing seems to have been written to the logs: [root@host ~]# ls -lah /var/log/httpd/ total 8.0K drwx------. 2 root root 4.0K Jun 21 16:19 . drwxr-xr-x. 21 root root 4.0K Jun 20 16:33 .. -rw-r----- 1 root root 0 Jun 21 16:19 modsec_audit.log -rw-r----- 1 root root 0 Jun 21 16:19 modsec_debug.log

    Read the article

  • Either, nginx+php-fpm bad config or nginx+php-fpm cannot handle high query?

    - by The Wolf
    I have wordpress installed in my server configured(hopefully with nginx+php-fpm+mariaDB). I am trying to import using wordpress importer a 1.5MB xml file. Everytime I try to upload it using the importer, it got cut of... meaning just blank screen result.. Here is my error log: actually I just posted 2 of the errors [error] 858#0: *1 connect() failed (111: Connection refused) while connecting to upstream, client: xx.xxx.xx.xx, server: xxx.com, request: "GET xxxx.html HTTP/1.1", upstream: "fastcgi://127.0.0.1:9000", host: "xxx.com" [error] 858#0: *13 connect() failed (111: Connection refused) while connecting to upstream, client: xxx.x.xx.xx, server: xxx.com, request: "GET xxxx.php HTTP/1.1", upstream: "fastcgi://127.0.0.1:9000", host: "xxx.com" I don't know what is the reason why it can't process the wordpress export .xml. I already increased max_file_upload & etc., but nothing happens. Hope somebody can help me. Here are my conf: nginx.conf user nginx; worker_processes 8; error_log /var/log/nginx/error.log warn; pid /var/run/nginx.pid; events { worker_connections 1024; } http { include /etc/nginx/mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; access_log /var/log/nginx/access.log main; sendfile on; #tcp_nopush on; server_tokens off; keepalive_timeout 65; fastcgi_read_timeout 500; #gzip on; client_max_body_size 2M; php-fpm.conf ;;;;;;;;;;;;;;;;;;;;; ; FPM Configuration ; ;;;;;;;;;;;;;;;;;;;;; ; All relative paths in this configuration file are relative to PHP's install ; prefix. ; Include one or more files. If glob(3) exists, it is used to include a bunch of ; files from a glob(3) pattern. This directive can be used everywhere in the ; file. include=/etc/php-fpm.d/*.conf ;;;;;;;;;;;;;;;;;; ; Global Options ; ;;;;;;;;;;;;;;;;;; [global] ; Pid file ; Default Value: none pid = /var/run/php-fpm/php-fpm.pid ; Error log file ; Default Value: /var/log/php-fpm.log error_log = /var/log/php-fpm/error.log ; Log level ; Possible Values: alert, error, warning, notice, debug ; Default Value: notice ;log_level = notice ; If this number of child processes exit with SIGSEGV or SIGBUS within the time ; interval set by emergency_restart_interval then FPM will restart. A value ; of '0' means 'Off'. ; Default Value: 0 ;emergency_restart_threshold = 0 ; Interval of time used by emergency_restart_interval to determine when ; a graceful restart will be initiated. This can be useful to work around ; accidental corruptions in an accelerator's shared memory. ; Available Units: s(econds), m(inutes), h(ours), or d(ays) ; Default Unit: seconds ; Default Value: 0 ;emergency_restart_interval = 0 ; Time limit for child processes to wait for a reaction on signals from master. ; Available units: s(econds), m(inutes), h(ours), or d(ays) ; Default Unit: seconds ; Default Value: 0 ;process_control_timeout = 0 ; Send FPM to background. Set to 'no' to keep FPM in foreground for debugging. ; Default Value: yes daemonize = no ;;;;;;;;;;;;;;;;;;;; ; Pool Definitions ; ;;;;;;;;;;;;;;;;;;;; ; See /etc/php-fpm.d/*.conf [root@host etc]# vim php-fpm.conf [root@host etc]# vim php-fpm.conf ; Default Value: notice ;log_level = notice ; If this number of child processes exit with SIGSEGV or SIGBUS within the time ; interval set by emergency_restart_interval then FPM will restart. A value ; of '0' means 'Off'. ; Default Value: 0 ;emergency_restart_threshold = 0 ; Interval of time used by emergency_restart_interval to determine when ; a graceful restart will be initiated. This can be useful to work around ; accidental corruptions in an accelerator's shared memory. ; Available Units: s(econds), m(inutes), h(ours), or d(ays) ; Default Unit: seconds ; Default Value: 0 ;emergency_restart_interval = 0 ; Time limit for child processes to wait for a reaction on signals from master. ; Available units: s(econds), m(inutes), h(ours), or d(ays) ; Default Unit: seconds ; Default Value: 0 ;process_control_timeout = 0 ; Send FPM to background. Set to 'no' to keep FPM in foreground for debugging. ; Default Value: yes daemonize = no ;;;;;;;;;;;;;;;;;;;; ; Pool Definitions ; ;;;;;;;;;;;;;;;;;;;; ; See /etc/php-fpm.d/*.conf ps aux [root@host etc]# ps aux USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 1 0.0 0.1 2900 1380 ? Ss Jun02 0:00 init root 2 0.0 0.0 0 0 ? S Jun02 0:00 [kthreadd/9308] root 3 0.0 0.0 0 0 ? S Jun02 0:00 [khelper/9308] root 124 0.0 0.0 2464 576 ? S<s Jun02 0:00 /sbin/udevd -d root 460 0.0 0.1 35976 1308 ? Sl Jun02 0:00 /sbin/rsyslogd -i /var/run/syslogd.pid -c 5 root 474 0.0 0.0 8940 1028 ? Ss Jun02 0:00 /usr/sbin/sshd root 481 0.0 0.0 3264 876 ? Ss Jun02 0:00 xinetd -stayalive -pidfile /var/run/xinetd.pid root 491 0.0 0.1 6268 1432 ? S Jun02 0:00 /bin/sh /usr/bin/mysqld_safe --datadir=/var/lib/mysql --pid-file=/var/lib/mysql/host.busilak.com. mysql 584 0.1 6.8 679072 71456 ? Sl Jun02 0:04 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --plugin-dir=/usr/lib/mysql/plugin --use root 586 0.0 0.3 12008 3820 ? Ss Jun02 0:01 sshd: root@pts/0 root 629 0.0 0.0 9140 756 ? Ss Jun02 0:00 /usr/sbin/saslauthd -m /var/run/saslauthd -a pam -n 2 root 630 0.0 0.0 9140 520 ? S Jun02 0:00 /usr/sbin/saslauthd -m /var/run/saslauthd -a pam -n 2 root 645 0.0 0.1 12788 1928 ? Ss Jun02 0:01 sendmail: accepting connections smmsp 653 0.0 0.1 12576 1728 ? Ss Jun02 0:00 sendmail: Queue runner@01:00:00 for /var/spool/clientmqueue root 691 0.0 0.1 7148 1184 ? Ss Jun02 0:00 crond root 698 0.0 0.1 6272 1688 pts/0 Ss Jun02 0:00 -bash root 1006 0.0 0.0 7828 924 ? Ss 00:30 0:00 nginx: master process /usr/sbin/nginx -c /etc/nginx/nginx.conf nginx 1007 0.0 0.1 8156 1724 ? S 00:30 0:00 nginx: worker process nginx 1008 0.0 0.1 8024 1360 ? S 00:30 0:00 nginx: worker process nginx 1009 0.0 0.1 8020 1356 ? S 00:30 0:00 nginx: worker process nginx 1011 0.0 0.1 8024 1360 ? S 00:30 0:00 nginx: worker process nginx 1012 0.0 0.1 8024 1360 ? S 00:30 0:00 nginx: worker process nginx 1013 0.0 0.1 8024 1360 ? S 00:30 0:00 nginx: worker process nginx 1014 0.0 0.1 8024 1360 ? S 00:30 0:00 nginx: worker process nginx 1015 0.0 0.1 8024 1344 ? S 00:30 0:00 nginx: worker process root 1030 0.0 0.2 25396 2904 ? Ss 00:30 0:00 php-fpm: master process (/etc/php-fpm.conf) apache 1031 0.0 1.9 40700 20624 ? S 00:30 0:00 php-fpm: pool www apache 1032 0.0 2.0 41924 21888 ? S 00:30 0:01 php-fpm: pool www apache 1033 0.0 1.9 41212 20848 ? S 00:30 0:01 php-fpm: pool www apache 1034 0.0 1.9 40956 20792 ? S 00:30 0:01 php-fpm: pool www apache 1035 0.0 2.0 41560 21556 ? S 00:30 0:02 php-fpm: pool www apache 1040 0.0 1.8 39292 19120 ? S 00:30 0:00 php-fpm: pool www root 1125 0.0 0.0 6080 1040 pts/0 R+ 01:04 0:00 ps aux netstat -l [root@host etc]# netstat -l Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 *:ssh *:* LISTEN tcp 0 0 localhost.localdomain:smtp *:* LISTEN tcp 0 0 localhost.locald:cslistener *:* LISTEN tcp 0 0 *:mysql *:* LISTEN tcp 0 0 *:http *:* LISTEN tcp 0 0 *:ssh *:* LISTEN Active UNIX domain sockets (only servers) Proto RefCnt Flags Type State I-Node Path unix 2 [ ACC ] STREAM LISTENING 60575947 /var/run/saslauthd/mux unix 2 [ ACC ] STREAM LISTENING 60574168 @/com/ubuntu/upstart unix 2 [ ACC ] STREAM LISTENING 60575873 /var/lib/mysql/mysql.sock Hope somebody can help me to figure out what is the problem.

    Read the article

  • How to allow writing to a mounted NFS partition

    - by Cerin
    How do you allow a specific user permission to write to an NFS partition? I've mounted an NFS share on my localhost (a Fedora install), and I can read and write as root, but I'm unable to write as the apache user, even though all the files and directories in the share on my localhost and remote host are owned by apache. For example, I've mounted it via this line in my /etc/fstab: remotehost:/data/media /data/media nfs _netdev,soft,intr,rw,bg 0 0 And both locations are owned by apache: [root@remotehost ~]# ls -la /data total 24 drwxr-xr-x. 6 root root 4096 Jan 6 2011 . dr-xr-xr-x. 28 root root 4096 Oct 31 2011 .. drwxr-xr-x 4 apache apache 4096 Jan 14 2011 media [root@localhost ~]# ls -la /data total 16 drwxr-xr-x 4 apache apache 4096 Dec 7 2011 . dr-xr-xr-x. 27 root root 4096 Jun 11 15:51 .. drwxrwxrwx 5 apache apache 4096 Jan 31 2011 media However, when I try and write as the apache user, I get a "Permission denied" error. [root@localhost ~]# sudo -u apache touch /data/media/test.txt' touch: cannot touch `/data/media/test.txt': Permission denied But of course it works fine as root. What am I doing wrong?

    Read the article

  • Identifying Service Error in Fedora 16

    - by Cerin
    How do you find the cause of a failed service start in Fedora 16? The new systemctl command in Fedora 16 seems to horribly obscure any useful logging info. [root@host ~]# systemctl start httpd.service Job failed. See system logs and 'systemctl status' for details. [root@host ~]# systemctl status httpd.service httpd.service - The Apache HTTP Server (prefork MPM) Loaded: loaded (/lib/systemd/system/httpd.service; enabled) Active: failed since Thu, 21 Jun 2012 16:26:56 -0400; 1min 23s ago Process: 2119 ExecStop=/usr/sbin/httpd $OPTIONS -k stop (code=exited, status=0/SUCCESS) Process: 2215 ExecStart=/usr/sbin/httpd $OPTIONS -k start (code=exited, status=1/FAILURE) Main PID: 1062 (code=exited, status=0/SUCCESS) CGroup: name=systemd:/system/httpd.service So the first command fails...and it tells me to run another command...which simply tells me that the command returned an error code. Where's the actual error? Even more frustrating is nothing seems to have been written to the logs: [root@host ~]# ls -lah /var/log/httpd/ total 8.0K drwx------. 2 root root 4.0K Jun 21 16:19 . drwxr-xr-x. 21 root root 4.0K Jun 20 16:33 .. -rw-r----- 1 root root 0 Jun 21 16:19 modsec_audit.log -rw-r----- 1 root root 0 Jun 21 16:19 modsec_debug.log

    Read the article

  • Audit file removal (auditctl)

    - by user1513039
    For some reason, some script or program is removing a pid file for the service on the linux server (centos5.4 / 2.6.18-308.4.1.el5xen). I suspect a faulty cron script, but manual investigation did not lead me to it. And i still want to track it down. Have been using auditctl rule: auditctl -w /var/run/some_service.pid -p w Which helped me to see something, but not quite exactly what i wanted: type=PATH msg=audit(11/12/2013 09:07:43.199:432577) : item=1 name=/var/run/some_service.pid inode=12419227 dev=fd:00 mode=file,644 ouid=root ogid=root rdev=00:00 type=SYSCALL msg=audit(11/12/2013 09:07:43.199:432577) : arch=x86_64 syscall=unlink success=yes exit=0 a0=7fff7dd46dd0 a1=1 a2=2 a3=127feb90 items=2 ppid=3454 pid=6227 auid=root uid=root gid=root euid=root suid=root fsuid=root egid=root sgid=root fsgid=root tty=pts0 ses=38138 comm=rm exe=/bin/rm key=(null) Problem here is that i see ppid of the script that removed the file, but at the analysis time the (p)pids are already invalid as probably scripts/programs have been shutdown. Imagine a cron script deleting the file. So i need some way to expand/add audit rule(s) to be able to trace the parents of the /bin/rm at the time of removal. I have been thinking to add some rule to monitor all process creation, something like: auditctl -a task,always But this happen to be very resource intensive. So i need help or advice how to combine these rules, or how to expand any of the rules to help track the script/program. Thanks.

    Read the article

  • In an iPad SplitView, how do I add a Date Picker control to the Root View?

    - by Dr Dork
    I'm diving into iPhone OS development on the iPad and one of the things I'm playing with is the SplitView template. The template provides a window with a UISplitView view, containing the Root View (on the left of the window) and the Detail View (on the right of the window). The Root View is a subclass of a TableView. Rather than having the entire Root View consist of a TableView, I'd like it to contain a DatePicker view along with the TableView under it. When I go into IB and try and drop a DatePicker into the Root View, it won't let me. It will only let me add a DatePicker view to the Detail View. Why wont IB let me drop a DatePicker view into the Root View? How can I add a DatePicker to the RootView in addition to the TableView? I'm still learning this new platform, so I apologize if these questions are absurd in any way. Thanks so much in advance for your help, I'm going to continue researching these questions right now.

    Read the article

  • In the Xcode SplitView template for an iPad app, how do I add a Date Picker control to the Root View

    - by Dr Dork
    I'm diving into iPhone OS development on the iPad and one of the things I'm playing with is the SplitView template. The template provides a window with a UISplitView view, containing the Root View (on the left of the window) and the Detail View (on the right of the window). The Root View is a subclass of a TableView. Rather than having the entire Root View consist of a TableView, I'd like it to contain a DatePicker view along with the TableView under it. When I go into IB and try and drop a DatePicker into the Root View, it won't let me. It will only let me add a DatePicker view to the Detail View. Why wont IB let me drop a DatePicker view into the Root View? How can I add a DatePicker to the RootView in addition to the TableView? I'm still learning this new platform, so I apologize if these questions are absurd in any way. Thanks so much in advance for your help, I'm going to continue researching these questions right now.

    Read the article

  • mp3 player a8706 not detected as usb device

    - by Robert Buckmaster
    I've got a a8706 mp3 player. When I plug it in, it charges but doesn't mount. In XP mounting works perfectly fine. I'm using 11.10. What should I do? Thanks lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 002: ID 0b97:7761 O2 Micro, Inc. Oz776 1.1 Hub Bus 007 Device 003: ID 0b97:7772 O2 Micro, Inc. OZ776 CCID Smartcard Reader Bus 002 Device 000: ID 1e74:4641 Coby Electronics Corporation

    Read the article

  • Gtk warning when opening Gedit in terminal

    - by dellphi
    Previously, I need to clear documents history, so I Googled and found this: http://www.watchingthenet.com/ubuntu-tip-clear-disable-recent-documents.html I did the step, and then when I opened gedit in root terminal, I've got this: root@dellph1-desktop:/# gedit (gedit:8224): GLib-CRITICAL **: g_bookmark_file_load_from_data: assertion `length != 0' failed (gedit:8224): Gtk-WARNING **: Attempting to store changes into `/root/.recently-used.xbel', but failed: Failed to rename file '/root/.recently-used.xbel.FP7PPV' to '/root/.recently-used.xbel': g_rename() failed: Operation not permitted (gedit:8224): Gtk-WARNING **: Attempting to set the permissions of `/root/.recently-used.xbel', but failed: Operation not permitted root@dellph1-desktop:/# And it's happpened in user terminal: dellph1@dellph1-desktop:~$ gedit (gedit:9408): Gtk-CRITICAL **: gtk_accel_label_set_accel_closure: assertion `gtk_accel_group_from_accel_closure (accel_closure) != NULL' failed dellph1@dellph1-desktop:~$ I really hope someone helps in this case, thank you.

    Read the article

  • Git Subtree. Why can't I branch from a subtree rather than the root?

    - by dugla
    I am struggling trying to make sense of using the Git subtree strategy. My intent was to pull some disparate repos together into a little family of toy repos under an umbrella repo. I'm using the subtree strategy detailed here: http://help.github.com/subtree-merge I am pulling my hair out trying to convince Git that I want to create a branch from one of these subtrees NOT from the root. When I cd into a subtree, create the branch, and then cd back to the root, running git branch from the root clearly indicates the branch was created at the root. Sigh. I love git/github but it is maddening getting this seemingly routine task to work properly. Could someone please enlighten me?

    Read the article

  • Short hand for number of tags having lengthier [and almost same] Xpath

    - by infant programmer
    For example : this is an xslt <xsl:template match="/root/sub-root/parent/child/grand_child/dummy1/dummy2/dummy3/dummy4/node_1 |/root/sub-root/parent/child/grand_child/dummy1/dummy2/dummy3/dummy4/node_2 |/root/sub-root/parent/child/grand_child/dummy1/dummy2/dummy3/dummy4/node_3 . . |/root/sub-root/parent/child/grand_child/dummy1/dummy2/dummy3/dummy4/node_N"/> In the above code can I use the XPath /root/sub-root/parent/child/grand_child/dummy1/dummy2/dummy3/dummy4 only once [use the braces or whatever] and reduce the bulkiness of the code? As you can see, all the nodes are siblings of each-other, so except their name their Xpath is same. Is there any short-hand property ? Does XSLT 1.0 (or Xpath1.0) allows it?

    Read the article

  • HTC Trophy not detected

    - by Earl Larson
    When I plug in the device via USB chord, nothing happens and the device is not shown on the desktop. However, when I type "lsusb" into a terminal this is the output: Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 002: ID 04f2:b249 Chicony Electronics Co., Ltd Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 005: ID 045e:04ec Microsoft Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub I'm assuming Microsoft Corp. is the device but why isn't Ubuntu displaying it on the desktop?

    Read the article

  • How to detect webcam?

    - by Vishwas
    I installed Cheese but it is not yet possible for me to work with my webcam. After running lsusb I get this: Bus 007 Device 002: ID 0483:2016 SGS Thomson Microelectronics Fingerprint Reader Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 005: ID 044e:3012 Alps Electric Co., Ltd Bus 003 Device 004: ID 044e:3013 Alps Electric Co., Ltd Bus 003 Device 003: ID 044e:3010 Alps Electric Co., Ltd Bluetooth Adapter Bus 003 Device 002: ID 044e:3011 Alps Electric Co., Ltd Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 05ca:1839 Ricoh Co., Ltd Visual Communication Camera VGP-VCC6 [R5U870] Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Tell me what should I do now?

    Read the article

  • How to set public SSH key for root user on server?

    - by amrnt
    I'm trying to follow Slicehost Document to setup my server. I reached SSH section. I made it as written, but when i logged out from root, i cant access root@IP_ADDRESS -p 30000 again! but i can access user@IP_ADDRESS -p 30000. So, the question is, how to set a public SSH key for root user? Thanks in advance!

    Read the article

  • Running 32-bit Firefox with sun-jre in 64-bit Ubuntu

    - by rojanu
    I am trying to run juniper networks connect program to vpn into work and it only works on 32bit sun jre. All the things I have found with google failed so far. I can't use any scripts, like madscientists, as part of the authentication I need to provide some random characters from a grid. So to isolate this 32bit app install to a corner, I downloaded firefox and jre and unpack them to /opt. I run firefox with sudo as Juniper asks for root password. Here is Firefox plugins folder /ot/firefox32/plugins# ls -la total 8 drwxr-xr-x 2 root root 4096 Mar 11 00:57 . drwxr-xr-x 11 root root 4096 Mar 10 23:48 .. lrwxrwxrwx 1 root root 49 Mar 11 00:57 libnpjp2.so -> /opt/java/32/jdk1.6.0_31/jre/lib/i386/libnpjp2.so Firefox lists sun jre but when check it with "http://java.com/en/download/installed.jsp" it either can't detect java or Firefox freezes Any Ideas? Thanks

    Read the article

  • Temporary R+W CIFS share for non-root accounts?

    - by Coder
    I want to set up a cross platform mail client (Thunderbird), and so far I want to use NAS as a profile store. The NAS is CIFS based, and can be mounted on both Windows and Ubuntu. Also the locking works fine for mutex, and setup seems to work as a proof of concept. The problem is the Linux mount. Since I'm using a laptop, I'm not always connected to network, hence, I can't use the /etc/fstab to set up CIFS share with a modified group id. And the share has to be mounted using mount -t cifs ..., which causes it to be owned by root, and owned so badly, that it can't be chowned to the regular user account. This causes read only issues for Thunderbird, which seem to be solved if Thunderbird is launched via sudo. But I would like to avoid that and use a script to mount the share on-demand to a profile location, with profile based privileges and access rights. Is there a way to achieve that?

    Read the article

  • Binary Tree operator overloading and recursion

    - by furious.snail
    I was wondering how to overload the == operator for a binary tree to compare if two trees have identical data at same nodes. So far this is what I have: bool TreeType::operator==(const TreeType& otherTree) const { if((root == NULL) && (otherTree.root == NULL)) return true; //two null trees are equal else if((root != NULL) && (otherTree.root != NULL)) { return((root-info == otherTree.root-info) && //this part doesn't actually do anything recursively... //(root-left == otherTree.root-left) && //(root-right == otherTree.root-right)) } else return false; //one tree is null the other is not } I have a similar function that takes two TreeNode pointers as parameters but I've been stuck on how to convert it to this function.

    Read the article

< Previous Page | 53 54 55 56 57 58 59 60 61 62 63 64  | Next Page >