Search Results

Search found 16787 results on 672 pages for 'mod disk cache'.

Page 57/672 | < Previous Page | 53 54 55 56 57 58 59 60 61 62 63 64  | Next Page >

• Hard Disk DRDY error: is it a crash

  - by pranjal

  I am using IBM Thinkpad, 1.7GHz, 512 RAM with Linux Mint 9 installed. I have two partitions in addition to root. One of the partitions became read-only yesterday, after which I rebooted my system. It is extremely slow along with DRDY Error : Is my Hard disk crashed ? Error Log while booting. Differences between boot sector and its backup. failed command : READ DMA BMDMA : stat 0X25 ata 1.00 : status : { DRDY ERR } ata 1.00 : status :{ UNC } Buffer I/O error on logical device, logical block 65467 smartctl output for the partition: mint mint # smartctl -a /dev/sda1 smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: TOSHIBA MK4026GAX RoHS Serial Number: X5LY1623T Firmware Version: PA107E User Capacity: 40,007,761,920 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 6 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Thu Feb 17 06:48:25 2011 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 153) seconds. Offline data collection capabilities: (0x1b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 30) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0 3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 310 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 3968 5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 40 7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 082 082 000 Old_age Always - 7257 10 Spin_Retry_Count 0x0033 179 100 030 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 3484 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 489 193 Load_Cycle_Count 0x0032 064 064 000 Old_age Always - 367150 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 36 (Lifetime Min/Max 14/57) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 33 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 82 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 1 199 UDMA_CRC_Error_Count 0x0032 200 253 000 Old_age Always - 0 220 Disk_Shift 0x0002 100 100 000 Old_age Always - 101 222 Loaded_Hours 0x0032 085 085 000 Old_age Always - 6146 223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0 224 Load_Friction 0x0022 100 100 000 Old_age Always - 0 226 Load-in_Time 0x0026 100 100 000 Old_age Always - 227 240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0 SMART Error Log Version: 1 ATA Error Count: 2371 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2371 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:03:10.061 READ DMA f8 00 00 00 00 00 e0 00 00:03:10.061 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:03:10.053 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:03:10.053 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:03:10.053 READ NATIVE MAX ADDRESS Error 2370 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:03:03.328 READ DMA f8 00 00 00 00 00 e0 00 00:03:03.327 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:03:03.320 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:03:03.319 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:03:03.319 READ NATIVE MAX ADDRESS Error 2369 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:02:56.582 READ DMA f8 00 00 00 00 00 e0 00 00:02:56.582 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:02:56.574 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:02:56.574 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:02:56.574 READ NATIVE MAX ADDRESS Error 2368 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:02:49.809 READ DMA f8 00 00 00 00 00 e0 00 00:02:49.809 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:02:49.801 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:02:49.801 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:02:49.801 READ NATIVE MAX ADDRESS Error 2367 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:02:43.056 READ DMA f8 00 00 00 00 00 e0 00 00:02:43.056 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:02:43.048 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:02:43.048 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:02:43.047 READ NATIVE MAX ADDRESS SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Device does not support Selective Self Tests/Logging Do I need to get a new Hard Disk my PC ?

  Read the article

• How to clear Windows disk read cache?

  - by Sebastiaan Megens

  For performance testing I need to clear Windows' disk read cache. I tried googling but I couldn't find anything other than rebooting or other manual stuff. Before I give in and do that, I'd like to know if anyone knows of a way to clear Windows disk read cache. I'm testing on Windows 7, but I'm also interested in Windows XP solutions.

  Read the article

• can i cache two diffrent web sites on varnish cache server?

  - by Kerberos

  i have two web web sites and i want to cache them with varnish. could i cache them on same varnish with using same port? for example; www.domain1.com:80, www.domain2.com:80

  Read the article

• ASP.net Create Self re-caching objects?

  - by BlackTea

  How can i make a cached object re-cache it self with updated info when the cache has expired? I'm trying to prevent the next user who request the cache to have to deal with getting the data setting the cache then using it is there any background method/event i can tie the object to so that when it expires it just calls the method it self and self-caches.

  Read the article

• problem with custom NSProtocol and caching on iPhone

  - by TomSwift

  My iPhone app embeds a UIWebView which loads html via a custom NSProtocol handler I have registered. My problem is that resources referenced in the returned html, which are also loaded via my custom protocol handler, are cached and never reloaded. In particular, my stylesheet is cached: <link rel="stylesheet" type="text/css" href="./styles.css" /> The initial request to load the html in the UIWebView looks like this: NSString* strUrl = [NSMutableString stringWithFormat: @"myprotocol:///entry?id=%d", entryID ]; NSURL* url = [NSURL URLWithString: strUrl]; [_pCurrentWebView loadRequest: [NSURLRequest requestWithURL: url cachePolicy: NSURLRequestReloadIgnoringLocalCacheData timeoutInterval: 60 ]]; (note the cache policy is set to ignore, and I've verified this cache policy carries through to subsequent requests for page resources on the initial load) The protocol handler loads the html from a database and returns it to the client using code like this: // create the response record NSURLResponse *response = [[NSURLResponse alloc] initWithURL: [request URL] MIMEType: mimeType expectedContentLength: -1 textEncodingName: textEncodingName]; // get a reference to the client so we can hand off the data id client = [self client]; // turn off caching for this response data [client URLProtocol: self didReceiveResponse:response cacheStoragePolicy: NSURLCacheStorageNotAllowed]; // set the data in the response to our jfif data [client URLProtocol: self didLoadData:data]; [data release]; (Note the response cache policy is "not allowed"). Any ideas how I can make it NOT cache my styles.css resource? I need to be able to dynamically alter the content of this resource on subsequent loads of html that references this file. I thought clearing the shared url cache would work, but it doesnt: [[NSURLCache sharedURLCache] removeAllCachedResponses]; One thing that does work, but it's terribly inefficient, is to dynamically cache-bust the url for the stylesheet by adding a timestamp parameter: <link rel="stylesheet" type="text/css" href="./styles.css?ts=1234567890" /> To make this work I have to load my html from the db, search and replace the url for the stylesheet with a cache-busting parameter that changes on each request. I'd rather not do this. My presumption is that there is no problem if I were to load my content via the built-in HTTP protocol. In that case, I'm guessing that the UIWebView looks at any Cache-Control flags in the NSURLHTTPResponse object's http headers and abides by them. Since my NSURLResponseObject has no http headers (it's not http...) then perhaps UIWebView just decides to cached the resource (ignoring the NSURLRequest caching directive?). Ideas???

  Read the article

• [Flex] Caching canvas into ByteArray

  - by Eugene

  Task: (all in code, not visual) create a canvas, place into it some labels and draw some lines, then cache it as byteArray. The problem is that if I cache an object that is already drawed on the screen, it works great, but if I cache a canvas, that have been created few lines earlier, this results white image. Is there any solution to cache a display object, that was created in code, but not intended to be displayed at all?

  Read the article

• Can I use a static cache Helper method in a NET MVC controller?

  - by Euston

  I realise there have been a few posts regarding where to add a cache check/update and the separation of concerns between the controller, the model and the caching code. There are two great examples that I have tried to work with but being new to MVC I wonder which one is the cleanest and suits the MVC methodology the best? I know you need to take into account DI and unit testing. Example 1 (Helper method with delegate) ...in controller var myObject = CacheDataHelper.Get(thisID, () => WebServiceServiceWrapper.GetMyObjectBythisID(thisID)); Example 2 (check for cache in model class) in controller var myObject = WebServiceServiceWrapper.GetMyObjectBythisID(thisID)); then in model class.............. if (!CacheDataHelper.Get(cachekey, out myObject)) { //do some repository processing // Add obect to cache CacheDataHelper.Add(myObject, cachekey); } Both use a static cache helper class but the first example uses a method signature with a delegate method passed in that has the name of the repository method being called. If the data is not in cache the method is called and the cache helper class handles the adding or updating to the current cache. In the second example the cache check is part of the repository method with an extra line to call the cache helper add method to update the current cache. Due to my lack of experience and knowledge I am not sure which one is best suited to MVC. I like the idea of calling the cache helper with the delegate method name in order to remove any cache code in the repository but I am not sure if using the static method in the controller is ideal? The second example deals with the above but now there is no separation between the caching check and the repository lookup. Perhaps that is not a problem as you know it requires caching anyway?

  Read the article

• (0xC03A0014) Failed to add device 'Microsoft Virtual Hard Disk'

  - by maniargaurav

  We had Windows 2008 SP2 Server. It was crashed due to mother board problem. After we got new motherboard we have installed Windows 2008 R2. Now when we try to attach Old VHD File we are getting following issue. Failed to add device 'Microsoft Virtual Hard Disk'. Cannot open attachment 'D:\Test\test.vhd'. Error: 'A virtual disk support provider for the specified file was not found.' TestVM': Cannot open attachment 'D:\Test\test.vhd'. Error: 'A virtual disk support provider for the specified file was not found.' (0xC03A0014). (Virtual machine ID 5626AAB2-C21C-48FF-8B70-40671CBC573B)

  Read the article

• backup exec - backup to disk offline

  - by Adam

  Hi We are running backup exec 9.1 doing a backup to disk to portable hard disk drives. When we run the backup manually it works fine. But when the backup is setup to run in the evening on a schedule it does not run as the backup to disk folders goes offline and therefore has to be switched back on line. After we have done this the backup runs and completes fine. Any ideas? We have tried leaving the progam open and this makes no difference. Server is Windows 2003 SBS

  Read the article

• "No bootable device - insert boot disk" after restart on Ubuntu 10.04 b1 update

  - by anjanesh

  I was making an update on my Ubuntu 10.04 beta1 64-bit PC when, after reboot I get PXE-E61: Mediaa test failure, check cable PXE-M0F: Exiting Intel Boot Agent. No bootable device - insert boot disk and press any key How did my boot record disappear ? BIOS Boot Boot Menu Type : Normal Boot Device Priority : <CD/DVD-ROM Drive> <Hard Disk Drive> <Floppy Drive> <Ethernet> Hard Driver Order : No Hard Disk Drive CD/DVD ROM Drive Order : <PT-TSSTcorp CDDV> Removable Drive Order : No Removable Drive Boot to Optical Devices : <Enable> Boot to Removable Devices : <Enable> Boot to Network : <Enable> USB Boot : <Enable>

  Read the article

• Virtual Disk Service Loader has stopped working

  - by Leigh Riffel

  We have several relatively recent (less than 1 week) installations of Windows Server 2008 R2 Enterprise that are getting this error whenever we open Disk Management. The application name is vdsldr.exe and the Problem Event Name is BEX64. The windows firewall was turned off and the service disabled. The Virtual Disk service was started (identical results when it is stopped). The computers are virtual machines running on VSphere, so that could be part of the problem. The strange thing is that Disk Manager worked fine when the VMs were first created.

  Read the article

• Add physical disk to KVM virtual machine

  - by evan

  I'm setting up a file server (nas4free) as a KVM virtual machine on a Ubuntu Server 12.04 system. How do I add physical hard drives directly to the VM so they can be used by the guest (nas4free), but not the host? Specifically the hard drive I'd like to mount is /dev/sda (which is not currently mounted on the server.) So far I've found two solutions but I haven't gotten either to work. The first is from Server Fault where it's suggested to use virt-manager. I haven't gotent this to work because when I try to select an existing drive nothing is being listed. My best guess as to why this is, is because I'm using virt-manager over ssh and not connecting as root, should that make a difference? The second solution I've found here is to just run the command (modified for my system) qm set nas4free -virtio /dev/sda but that seems to require proxmox which I don't have installed and doesn't seem to be in the default repositories? Finally, once the above is sorted out and I can mount the drive directly to the VM, does anyone have an experience with whether the drive should be mounted to the VM as scsi, ide, or virtio? (I know virtio was recommend in the linked ServerFault page, but I hadn't heard of it before now since I mainly use VMWare). Thanks for your help!!!

  Read the article

• Beeping Hard Disk - Seagate 250GB Momentus 5400.6

  - by Pez Cuckow

  I have been trying to repair a laptop that simply beeps instead of booting. After taking it apart I have now realised that it is the hard disk beeping. I know that may sound strange but I guarantee that is what it is! (Currently powered on it's own with a Sata Mains lead). The beeping is slightly faster than one per second there is a link to this recording. This recording was made resting the mic on the hard disk while it was sat on a table on it's own, there are no speakers anywhere near, the sound is coming from the hard disk. Does anyone know what this beep means? Is the hard drive just dead, or is it fixable and the data recoverable? Many thanks,

  Read the article

• Freeing disk space on Ubuntu to use in Windows

  - by Alex

  I have 250Gb drive on a laptop, which has Windows 7 on a 122Gb ntfs partition (which has a "boot" flag on it) and Ubuntu 12.04.1 on a 110Gb extended partition, of which the root ext4 partition is 108Gb and the swap is 1.74Gb. You can see everything in the screenshot below. My question is: I want to diminish the size of the linux root partition and then use that space to increase the windows partition. How do I do that? Also, is it possible to increase the size of the swap partition and not do any damage? If so, how? I'm using GParted, and i'd say i'm pretty confident with it. Screenshot of my partitions

  Read the article

• Monitoring Database disk space

  - by Michael Freidgeim

  An article Data files: To Autogrow Or Not To Autogrow? recommends NOT to rely on auto-grow, because it causing delays in unplanned times.We should mtonitor database files(both data and log), and if they close to max capacity, manually increase the size. However it doesn't give references, how to monitor the free space inside databases. I've tried to look how to do it. It can be done manually using   execute sp_spaceused for the database in question or  sp_SOS (can be downloaded from http://searchsqlserver.techtarget.com/tip/Find-size-of-SQL-Server-tables-and-other-objects-with-stored-procedure)Alternatively you can run SQL commands as suggested in Http://www.sqlteam.com/forums/topic.asp?TOPIC_ID=82359 by Michael Valentine Jonesselect [FREE_SPACE_MB] = convert(decimal(12,2),round((a.size-fileproperty(a.name,'SpaceUsed'))/128.000,2)) from dbo.sysfiles aMore useful article Monitor database file sizes with SQL Server Jobs describes how to setup monitoring Finally I found the excellent articleManaging Database Data Usage With Custom Space Alerts, that can be followed even support personnel without much DBA experience.

  Read the article

• "No bootable device - insert boot disk" after restart on Ubuntu 10.04 b1 update

  - by anjanesh

  I was making an update on my Ubuntu 10.04 beta1 64-bit PC when, after reboot I get PXE-E61: Mediaa test failure, check cable PXE-M0F: Exiting Intel Boot Agent. No bootable device - insert boot disk and press any key How did my boot record disappear ? BIOS Boot Boot Menu Type : Normal Boot Device Priority : <CD/DVD-ROM Drive> <Hard Disk Drive> <Floppy Drive> <Ethernet> Hard Driver Order : No Hard Disk Drive CD/DVD ROM Drive Order : <PT-TSSTcorp CDDV> Removable Drive Order : No Removable Drive Boot to Optical Devices : <Enable> Boot to Removable Devices : <Enable> Boot to Network : <Enable> USB Boot : <Enable>

  Read the article

• 1Tb disk formatted on Linux won't mount on windows nor mac

  - by Pedro MC

  I have an external HD (western digital) with 1Tb. I use Linux but I wanted to reserve a cross platform partition on the disk. I decided to create two partitions and used the "disks" application to do it. I created one partition with the LUKS (version 1) encryption and the other one, cross platform, in NTFS filesystem. Things work fine on my OS but when I try to use the disk (the cross platform partition) on both windows and mac the device is not recognized. What could it be? Next, output of "sfdisk -l /dev/sdb": Disk /dev/sdb: 121600 cylinders, 255 heads, 63 sectors/track Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0 Device Boot Start End #cyls #blocks Id System /dev/sdb1 0+ 36473- 36473- 292968750 83 Linux /dev/sdb2 36473+ 121600- 85128- 683789062+ 83 Linux /dev/sdb3 0 - 0 0 0 Empty /dev/sdb4 0 - 0 0 0 Empty

  Read the article

• Different block sizes for partition and underlying logical disk on HP Raid Controller (Linux)

  - by Wawrzek

  Following links collected in this thread I started to check blockdev and found the following output indicating different sizes for partition c0d9p1 and the underlying device (c0d9): [root@machine ~]# blockdev --report /dev/cciss/c0d9 RO RA SSZ BSZ StartSec Size Device rw 256 512 4096 0 3906963632 /dev/cciss/c0d9 [root@machine ~]# blockdev --report /dev/cciss/c0d9p1 RO RA SSZ BSZ StartSec Size Device rw 256 512 2048 1 3906959039 /dev/cciss/c0d9p1 We have a lot of small files, so yes the block size is smaller than normal. The device is a logical driver on an HP P410 raid controller, simple disk without any raid - RAID 0 on one disk to be precise. (Please note that above configuration is a feature not a bug). Therefore, I have the following questions. Can the above discrepancy in the block size affect disk performance? Can I control the block size using hpacucli?

  Read the article

• Installing a DLL to Global assembly cache (GAC)

  - by DAXShekhar

  Install you DLL assembly by using the ‘gacutil.exe’, before installing the DLL ensure it has a strong name, to assign a strong name refer to the link Assigning a DLL strong name .   1) open the Command prompt, and navigate to the folder of gacutil. 2) To install a DLL assembly gacutil /I "C:\[PathToBinDirectoryInVSProject]\gac.dll" 3) To uninstall gacutil /U  “Name_of_The_DLL”

  Read the article

• mount another drive to the same directory

  - by Ken Autotron

  I recently purchased a server that was advertised as 2TB (2 1TB drives) in size, when I use it it reports only one of the drives, I would like to be able to use both as if one drive. here is the specs... sudo lshw -C disk *-disk description: ATA Disk product: TOSHIBA DT01ACA1 vendor: Toshiba physical id: 0.0.0 bus info: scsi@1:0.0.0 logical name: /dev/sda version: MS2O serial: 13EJ81XPS size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=0005b3dd *-disk description: ATA Disk product: TOSHIBA DT01ACA1 vendor: Toshiba physical id: 0.0.0 bus info: scsi@4:0.0.0 logical name: /dev/sdb version: MS2O serial: 13OX3TKPS size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=00030e86 and fdisk -l Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00030e86 Device Boot Start End Blocks Id System /dev/sdb1 * 4096 41947135 20971520 fd Linux raid autodetect /dev/sdb2 41947136 1952468991 955260928 fd Linux raid autodetect /dev/sdb3 1952468992 1953519615 525312 82 Linux swap / Solaris Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x0005b3dd Device Boot Start End Blocks Id System /dev/sda1 * 4096 41947135 20971520 fd Linux raid autodetect /dev/sda2 41947136 1952468991 955260928 fd Linux raid autodetect /dev/sda3 1952468992 1953519615 525312 82 Linux swap / Solaris Disk /dev/md2: 978.2 GB, 978187124736 bytes 2 heads, 4 sectors/track, 238815216 cylinders, total 1910521728 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Disk /dev/md2 doesn't contain a valid partition table Disk /dev/md1: 21.5 GB, 21474770944 bytes 2 heads, 4 sectors/track, 5242864 cylinders, total 41942912 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Disk /dev/md1 doesn't contain a valid partition table is it possible to mount both drives to say /Home/ so I would have 2TB of usable space?

  Read the article

• Format an external hard disk

  - by Alex

  I am trying to format an external hard disk to FAT32 (I need it to work with some hardware that expects it to be in FAT32). When I am trying to format it via windows the only option I'm getting is to format it to NTFS. Another strange thing is that when I am trying to format one of my own partitions (on the hard disk that is running the OS) I can do it only in NTFS while another partition my OS can format in both NTFS and FAT32. What can cause such a behavior and how can I format the external hard disk to FAT32?

  Read the article

• Url rewrite subfolder to root and forbid accessing subfolder

  - by Alessandro Pezzato

  I have drupal installed in a subfolder drupal, but I want to access pages as it is in root folder: http://www.example.com instead of http://www.example.com/drupal I'm able to have this working, but it's also working with url containing subfolder, so I have http://www.example.com and a clone site in http://www.example.com/drupal What is the rule to forbid access to subfolder? I want all url starting with http://www.example.com/drupal being forbidden. This is .htaccess in / directory: Options -Indexes Options +FollowSymLinks <IfModule mod_rewrite.c> RewriteEngine on RewriteCond %{HTTP_HOST} ^www\.(.+)$ [NC] RewriteRule ^ http://%1%{REQUEST_URI} [L,R=301] RewriteRule ^(.*+)$ drupal/$1 [L,QSA] </IfModule> And this is drupal .htaccess in /drupal/ directory: Options -Indexes Options +FollowSymLinks ErrorDocument 404 index.php DirectoryIndex index.php index.html index.htm # Override PHP settings that cannot be changed at runtime. See # sites/default/default.settings.php and drupal_initialize_variables() in # includes/bootstrap.inc for settings that can be changed at runtime. # PHP 5, Apache 1 and 2. <IfModule mod_php5.c> php_flag magic_quotes_gpc off php_flag magic_quotes_sybase off php_flag register_globals off php_flag session.auto_start off php_value mbstring.http_input pass php_value mbstring.http_output pass php_flag mbstring.encoding_translation off </IfModule> # Requires mod_expires to be enabled. <IfModule mod_expires.c> # Enable expirations. ExpiresActive On # Cache all files for 2 weeks after access (A). ExpiresDefault A1209600 <FilesMatch \.php$> # Do not allow PHP scripts to be cached unless they explicitly send cache # headers themselves. Otherwise all scripts would have to overwrite the # headers set by mod_expires if they want another caching behavior. This may # fail if an error occurs early in the bootstrap process, and it may cause # problems if a non-Drupal PHP file is installed in a subdirectory. ExpiresActive Off </FilesMatch> </IfModule> # Various rewrite rules. <IfModule mod_rewrite.c> RewriteEngine on # Block access to "hidden" directories whose names begin with a period. This # includes directories used by version control systems such as Subversion or # Git to store control files. Files whose names begin with a period, as well # as the control files used by CVS, are protected by the FilesMatch directive # above. RewriteRule "(^|/)\." - [F] # To redirect all users to access the site WITH the 'www.' prefix, # (http://example.com/... will be redirected to http://www.example.com/...) # uncomment the following: # RewriteCond %{HTTP_HOST} !^www\. [NC] # RewriteRule ^ http://www.%{HTTP_HOST}%{REQUEST_URI} [L,R=301] # # To redirect all users to access the site WITHOUT the 'www.' prefix, # (http://www.example.com/... will be redirected to http://example.com/...) # uncomment the following: RewriteCond %{HTTP_HOST} ^www\.(.+)$ [NC] RewriteRule ^ http://%1%{REQUEST_URI} [L,R=301] RewriteBase /drupal # Pass all requests not referring directly to files in the filesystem to # index.php. Clean URLs are handled in drupal_environment_initialize(). RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_URI} !=/favicon.ico #RewriteRule ^ index.php [L] RewriteRule ^(.*)$ index.php?q=$1 [L,QSA] # Rules to correctly serve gzip compressed CSS and JS files. # Requires both mod_rewrite and mod_headers to be enabled. <IfModule mod_headers.c> # Serve gzip compressed CSS files if they exist and the client accepts gzip. RewriteCond %{HTTP:Accept-encoding} gzip RewriteCond %{REQUEST_FILENAME}\.gz -s RewriteRule ^(.*)\.css $1\.css\.gz [QSA] # Serve gzip compressed JS files if they exist and the client accepts gzip. RewriteCond %{HTTP:Accept-encoding} gzip RewriteCond %{REQUEST_FILENAME}\.gz -s RewriteRule ^(.*)\.js $1\.js\.gz [QSA] # Serve correct content types, and prevent mod_deflate double gzip. RewriteRule \.css\.gz$ - [T=text/css,E=no-gzip:1] RewriteRule \.js\.gz$ - [T=text/javascript,E=no-gzip:1] <FilesMatch "(\.js\.gz|\.css\.gz)$"> # Serve correct encoding type. Header append Content-Encoding gzip # Force proxies to cache gzipped & non-gzipped css/js files separately. Header append Vary Accept-Encoding </FilesMatch> </IfModule> </IfModule>

  Read the article

• Can a virus corrupt a hard disk?

  - by sundar

  Shorter version: Hard disk corrupt, vendor claims warranty does not apply since it was "due to a virus" and "problems due to software are not covered under the warranty". Longer version: My Dell laptop recently refused to boot, and all attempts to 'repair' the Vista installation using the provided installation CD failed. I called up Dell support, and a representative took the laptop and after a day said the hard disk is corrupt. When I tried to ask for a replacement under the warranty, an official replied that the corruption was due to a virus, and "problems due to software are not covered under the warranty". Now, I get a doubt that he's trying to avoid having to provide it under the warranty. Is it possible for a hard disk to get corrupt due to a virus? If yes, is there any way we can detect it was due to a virus (as he claims to have detected)?

  Read the article

• Tape vs. Disk: Tape Refuses to be Evicted

  Like a tenant who refuses to be evicted from an area earmarked for redevelopment, tape is alive and kicking. When it comes to long-term backup retention and archiving, it is holding its own against dedupe &#151; especially among large enterprises.

  Read the article

• Tape vs. Disk: Tape Refuses to be Evicted

  Like a tenant who refuses to be evicted from an area earmarked for redevelopment, tape is alive and kicking. When it comes to long-term backup retention and archiving, it is holding its own against dedupe &#151; especially among large enterprises.

  Read the article

< Previous Page | 53 54 55 56 57 58 59 60 61 62 63 64  | Next Page >