Search Results

Search found 2027 results on 82 pages for 'php5 gd'.

Page 57/82 | < Previous Page | 53 54 55 56 57 58 59 60 61 62 63 64  | Next Page >

• PHP 5.4.9 Mysqli issue

  - by Vitaly

  On Ubuntu 12.04 server I had PHP 5.4.9 installed from the source: ./configure --prefix=/etc/php --with-apxs2=/etc/apache2/bin/apxs --with-config-file-path=/etc/php --with-config-file-scan-dir=/etc/php/conf.d --with-libxml-dir=/usr/local/libxml2 --with-xsl=/usr/local/libxslt --with-mysql --with-zlib --with-pdo-mysql --enable-calendar --with-gd --with-iconv-dir --enable-mbstring --enable-soap --enable-sockets --enable-zip --with-curl --with-openssl --with-kerberos --with-tidy' Then, using apt-get, I had mysql server and phpMyAdmin installed. Unfortunatelly phpMyAdmin keep saying that 'mysqli' and 'mcrypt' not installed. php -m | grep mysqli just confirms it. So I tried to install mysqli with "apt-get install php5-mysqli", but just got message to do it by means of "php5-mysqlnd" or "php5-mysql". Even though they are already installed (according to phpinfo()) I tried - doesn't work. However, in php.ini, there's mysqli staff like "extension=php_mysqli.dll", but no "extension=mysqli.so". And block [MySQLi] with some uncommented settings also present. Since this is my first attempt to build php from source I reckon I did some silly mistake. Any help is greatly appreciated.

  Read the article

• WAMP Installation - Multiple PHP Version Issues

  - by Pete171

  I have installed WAMP because I am attempting to modify an an application which uses Zend Optimizer (I cannot use Z.O. with PHP5.3+, which is why I decided to install WAMP). I downloaded the latest version - Wamp Server 2.1 - which comes bundled with PHP5.3.5. I then downloaded a PHP version that would be compatible with Z.O. - 5.2.9. - and a compatible Apache version, 2.0.63. My problem: PHP scripts run fine, but anything with MySQL does not work. Running the testmysql.php script returns the fatal error: Fatal error: Call to undefined function mysql_connect() in C:\wamp\www\testmysql.php on line 2". I have looked in the PHP INI files inside both PHP versions, and I'm fairly sure the relevant information is there. At least, there are parts inside that mention MySQL! Perhaps somebody could clarify exactly what information should be present? Also, when visiting a page that called phpinfo(), I noticed that the 'Loaded Configuration File' was pointing to C:\wamp\bin\php\php5.3.5\php.ini, even though I have enabled the older PHP version. I've stopped and started Apache, too, and that hasn't made a difference. Is anybody able to offer any assistance? Anything at all would be great; I'm not very good at messing around with Apache/

  Read the article

• nginx codeigniter rewrite: Controller name conflicts with directory

  - by palerdot

  I'm trying out nginx and porting my existing apache configuration to nginx. I have managed to reroute the codeigniter url's successfully, but I'm having a problem with one particular controller whose name coincides with a directory in site root. I managed to make my codeigniter url's work as it did in Apache except that, I have a particular url say http://localhost/hello which coincides with a hello directory in site root. Apache had no problem with this. But nginx routes to this directory instead of the controller. My reroute structure is as follows http://host_name/incoming_url => http://host_name/index.php/incoming_url All the codeigniter files are in site root. My nginx configuration (relevant parts) location / { # First attempt to serve request as file, then # as directory, then fall back to index.html index index.php index.html index.htm; try_files $uri $uri/ /index.php/$request_uri; #apache rewrite rule conversion if (!-e $request_filename){ rewrite ^(.*)/?$ /index.php?/$1 last; } # Uncomment to enable naxsi on this location # include /etc/nginx/naxsi.rules } location ~ \.php.*$ { fastcgi_split_path_info ^(.+\.php)(/.+)$; # NOTE: You should have "cgi.fix_pathinfo = 0;" in php.ini # With php5-cgi alone: fastcgi_pass 127.0.0.1:9000; # With php5-fpm: #fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_index index.php; include fastcgi_params; } I'm new to nginx and I need help in figuring out this directory conflict with the Controller name. I figured this configuration from various sources in the web, and any better way of writing my configuration is greatly appreciated.

  Read the article

• Fedora Core 6 Migration

  - by Matthew Sprankle

  I am at a loss as to what I should to for this server. I need it to run php5.3 and corresponding version of mysql. I received a client today through work that is using Fedora core 6 running 10 very small websites on some very hodge podge setup. My original idea was just upgrade to php5.3. I have yum (installed 3.0.8) reconfigured for the fedora archive. The latest version of php it allows is 5.1.8. I am still relatively new to server setups and am nervous about wiping their server to upgrade it. Since it is about 6-8 years old I'm not sure if it will even support the newest version of fedora. The server specs are: Parallels Plesk Panel version 9.5.4 Operating system Linux 2.6.9-023stab048.4-smp CPU GenuineIntel, Intel(R) Xeon(R)CPU E5335 @ 2.00GHz (10gb disk space and 1gb of memory). I use fedora for my personal server so I was a little familiar with it. I haven't done anything too extravagant. Is there a way I can escape this nightmare with installing php5.3 or do I need to migrate these sites to a new server?

  Read the article

• Apache2 php fastcgi, run for each request.

  - by SPnova

  I've installed php fastcgi for Apache2 by this doc: http://library.linode.com/web-servers/apache/php-cgi/ubuntu-9.10-karmic Pages is opening fine. But I don't understand why I can't see php5-cgi process [ top ] Looks like apache run php5-cgi for each request, but processes should be already run. Could you help me to find the problem?

  Read the article

• Staging server .htaccess for images, css and js

  - by Gavin Hall

  As we build and demo sites on our staging server with individual root folders for each such as /CLIENTNAME, we need to keep all the css, js and internal links for these sites referencing the server root. The following works for one folder each, but not sure how to adapt to work for all folders. Currently AddHandler php5-script .php RewriteEngine On RewriteRule ^(images|css|js)\/(.*) /ONEFOLDER/$1/$2 Would like AddHandler php5-script .php RewriteEngine On RewriteRule ^(images|css|js)\/(.*) /EVERYFOLDER/$1/$2 Many thanks in advance.

  Read the article

• Letter placement error with GD2, TTF and PHP

  - by Javier Parra

  Some time ago I made a script that takes some text and returns it as an image, and worked flawlessly. But I'm not sure since when a weird bug started to happen. The letters that have a (my apologies to the font geeks) "glyph" on the left get pushed to the right so the letter starts on it, but leaves space only for the main letter, hehe, I think an example should do it. The expected result is: The "bad" one was generated, obviously, by my script, located here: http://www.esbasura.com/images/text.php?txt=The%20quick%20brown%20fox%20jumps%20over%20the%20lazy%20dog.&fnt=1&size=23&bg=lightgrey And the good one was generated by dafont here: http://img.dafont.com/preview.php?text=The%20quick%20brown%20fox%20jumps%20over%20the%20lazy%20dog.&ttf=bleeding_cowboys0&ext=1&size=23&psize=m&y=46 I'm not doing anything fancy in the script, here is the relevant part: imagefilledrectangle($im, 0, 0, $width, $height, $$bg); imagettftext($im, $size, 0, (-1*$textsize[6]), (-1*$textsize[7]), $$color, $font, $text); // imagefttext($im, $size, 0, (-1*$textsize[6]), (-1*$textsize[7]), $$color, $font, $text); same results using imagefttext imagecolortransparent($im, $$bg); header("Cache-Control: public"); // HTTP/1.1 header("Content-type: image/png"); imagepng($im); imagedestroy($im); } I'm kind of surprised, because, as I said, it used to work flawlessly. Maybe my host changed my machine. (here's my phpinfo: http://www.work4bandwidth.com/info.php) Relevant bit: gd GD Support enabled GD Version bundled (2.0.34 compatible) FreeType Support enabled FreeType Linkage with freetype FreeType Version 2.2.1 GIF Read Support enabled GIF Create Support enabled JPG Support enabled PNG Support enabled WBMP Support enabled XBM Support enabled

  Read the article

• Rexml - Parsing Data

  - by Paddy

  I have a XML File in the following format: <?xml version='1.0' encoding='UTF-8'?> <entry xmlns='http://www.w3.org/2005/Atom' xmlns:gwo='http://schemas.google.com/analytics/websiteoptimizer/2009' xmlns:app='http://www.w3.org/2007/app' xmlns:gd='http://schemas.google.com/g/2005' gd:etag='W/&quot;DUYGRX85fCp7I2A9WxFWEkQ.&quot;'><id>https://www.google.com/analytics/feeds/websiteoptimizer/experiments/1025910</id><updated>2010-05-31T02:12:04.124-07:00</updated><app:edited>2010-05-31T02:12:04.124-07:00</app:edited><title>Flow Experiment</title><link rel='gwo:goalUrl' type='text/html' href='http://cart.personallifemedia.com/dlg/download.php'/><link rel='alternate' type='text/html' href='https://www.google.com/websiteoptimizer'/><link rel='self' type='application/atom+xml' href='https://www.google.com/analytics/feeds/websiteoptimizer/experiments/1025910'/><gwo:analyticsAccountId>16334726</gwo:analyticsAccountId><gwo:autoPruneMode>None</gwo:autoPruneMode><gwo:controlScript>..... I have to parse and get the data for gd:etag and how do I do it? I was able to get the value using SimpleXML, but i wanted to achieve it in ReXML. Please do advice.

  Read the article

• Trouble creating calendar in Google API via Coldfusion

  - by KingErroneous

  I am trying to create a caledar using the Google API, and it just returns the list of calendars in my account, just like I sent a GET request. Here is my code: <cfxml variable="locals.xml"> <cfoutput> <entry xmlns="http://www.w3.org/2005/Atom" xmlns:gd="http://schemas.google.com/g/2005" xmlns:gCal="http://schemas.google.com/gCal/2005"> <title type="text">#arguments.argTitle#</title> <summary type="text">#arguments.argSummary#</summary> <cfif len(arguments.argTimezone)><gCal:timezone value="#arguments.argTimezone#"></gCal:timezone></cfif> <gCal:hidden value="false"></gCal:hidden> <gCal:accesslevel value="owner" /> <gCal:color value="#arguments.argColor#"></gCal:color> <gd:where rel='' label='' valueString='Oakland'></gd:where> </entry> </cfoutput> </cfxml> <cfhttp url="#variables.baseURL#/default/owncalendars/full" method="post" redirect="false" multiparttype="related" charset="utf-8"> <cfhttpparam type="header" name="Authorization" value="GoogleLogin auth=#getAuth(variables.serviceName)#"> <cfhttpparam type="header" name="Content-Type" value="application/atom+xml"> <cfhttpparam type="header" name="GData-Version" value="2"> <cfhttpparam type="body" value="#trim(locals.xml)#"> </cfhttp> Any help would be appreciated.

  Read the article

• Nginx + Nagios : 502 Bad gateway

  - by MrROY

  I have a fully new install nagios, but I can't access to it. Here's my Nginx config: server{ listen 80; server_name 61.148.45.10; # blahblah # Nagios Monitoring location /nagios3/ { proxy_pass http://127.0.0.1:80; } } Nagios is installed step by step(From this Linode guide): sudo apt-get install -y nagios3 Then I try to visit http://ip-address/nagios3/, but it shows 502 bad gateway. How do I deal with this ? This is my /var/log/syslog: Oct 25 14:18:17 my-server nagios3: SERVICE ALERT: localhost;Disk Space;WARNING;SOFT;1;DISK WARNING - free space: /boot 43 MB (20% inode=99%): Oct 25 14:19:07 my-server nagios3: SERVICE ALERT: localhost;HTTP;WARNING;SOFT;1;HTTP WARNING: HTTP/1.1 403 Forbidden - 319 bytes in 0.000 second response time Oct 25 14:19:17 my-server nagios3: SERVICE ALERT: localhost;Disk Space;WARNING;SOFT;2;DISK WARNING - free space: /boot 43 MB (20% inode=99%): Oct 25 14:20:07 my-server nagios3: SERVICE ALERT: localhost;HTTP;WARNING;SOFT;2;HTTP WARNING: HTTP/1.1 403 Forbidden - 319 bytes in 0.000 second response time Oct 25 14:20:17 my-server nagios3: SERVICE ALERT: localhost;Disk Space;WARNING;SOFT;3;DISK WARNING - free space: /boot 43 MB (20% inode=99%): Oct 25 14:21:07 my-server nagios3: SERVICE ALERT: localhost;HTTP;WARNING;SOFT;3;HTTP WARNING: HTTP/1.1 403 Forbidden - 319 bytes in 0.000 second response time Oct 25 14:21:17 my-server nagios3: SERVICE ALERT: localhost;Disk Space;WARNING;HARD;4;DISK WARNING - free space: /boot 43 MB (20% inode=99%): Oct 25 14:21:17 my-server nagios3: SERVICE NOTIFICATION: root;localhost;Disk Space;WARNING;notify-service-by-email;DISK WARNING - free space: /boot 43 MB (20% inode=99%): Oct 25 14:21:17 my-server postfix/pickup[24474]: 4F89F394034C: uid=109 from=<nagios> Oct 25 14:21:17 my-server postfix/cleanup[27756]: 4F89F394034C: message-id=<20131025062117.4F89F394034C@my-server> Oct 25 14:21:17 my-server postfix/qmgr[24475]: 4F89F394034C: from=<nagios@[email protected]>, size=594, nrcpt=1 (queue active) Oct 25 14:21:17 my-server postfix/local[27758]: 4F89F394034C: to=<root@localhost>, relay=local, delay=0.15, delays=0.11/0/0/0.04, dsn=2.0.0, status=sent (delivered to mailbox) Oct 25 14:21:17 my-server postfix/qmgr[24475]: 4F89F394034C: removed Oct 25 14:22:07 my-server nagios3: SERVICE ALERT: localhost;HTTP;WARNING;HARD;4;HTTP WARNING: HTTP/1.1 403 Forbidden - 319 bytes in 0.000 second response time Oct 25 14:22:07 my-server nagios3: SERVICE NOTIFICATION: root;localhost;HTTP;WARNING;notify-service-by-email;HTTP WARNING: HTTP/1.1 403 Forbidden - 319 bytes in 0.000 second response time Oct 25 14:22:07 my-server postfix/pickup[24474]: 219CA3940381: uid=109 from=<nagios> Oct 25 14:22:07 my-server postfix/cleanup[27756]: 219CA3940381: message-id=<20131025062207.219CA3940381@my-server> Oct 25 14:22:07 my-server postfix/qmgr[24475]: 219CA3940381: from=<nagios@[email protected]>, size=605, nrcpt=1 (queue active) Oct 25 14:22:07 my-server postfix/local[27758]: 219CA3940381: to=<root@localhost>, relay=local, delay=0.12, delays=0.07/0/0/0.05, dsn=2.0.0, status=sent (delivered to mailbox) Oct 25 14:22:07 my-server postfix/qmgr[24475]: 219CA3940381: removed Oct 25 14:39:01 my-server CRON[28242]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete) And there're lot of 127.0.0.1 visit in nginx log, but I actually visit from a external ip: 127.0.0.1 - - [25/Oct/2013:14:21:02 +0800] "GET /nagios3/ HTTP/1.0" 502 575 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_8_5) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/3 0.0.1599.69 Safari/537.36" 127.0.0.1 - - [25/Oct/2013:14:21:02 +0800] "GET /nagios3/ HTTP/1.0" 502 575 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_8_5) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/3 0.0.1599.69 Safari/537.36" 127.0.0.1 - - [25/Oct/2013:14:21:02 +0800] "GET /nagios3/ HTTP/1.0" 502 575 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_8_5) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/3 0.0.1599.69 Safari/537.36"

  Read the article

• iproute2 not functioning ("RTNETLINK answers: Operation not supported")

  - by James Watt

  The command and error message: gtwy ~ # ip rule add from 64.251.23.186 table t1 RTNETLINK answers: Operation not supported Older article of the same problem, but it did not help me: http://forums.gentoo.org/viewtopic-t-696982-start-0-postdays-0-postorder-asc-highlight-.html I have looked on google at great lengths to try to find a solution. It seems that my kernel configuration is missing something? Any help or ideas would be appreciated. My system/kernel is: 2.6.36-gentoo-r5 #3 SMP Thu Jan 13 10:49:06 EST 2011 x86_64 Intel(R) Xeon(R) CPU X3220 @ 2.40GHz GenuineIntel GNU/Linux. I am posting this on SuperUser since this system is used as a workstation and this problem is unrelated to specific tasks that are handled exclusively by servers. iproute2 is installed: gtwy etc # emerge --search iproute2 Searching... [ Results for search key : iproute2 ] [ Applications found : 1 ] * sys-apps/iproute2 Latest version available: 2.6.35-r2 Latest version installed: 2.6.35-r2 Size of files: 378 kB Homepage: http://www.linuxfoundation.org/collaborate/workgroups/networking/iproute2 Description: kernel routing and traffic control utilities License: GPL-2 A small snippet of my kernel .config (view entire .config): gtwy linux # cat .config | grep NETLINK CONFIG_NETFILTER_NETLINK=y CONFIG_NETFILTER_NETLINK_QUEUE=y CONFIG_NETFILTER_NETLINK_LOG=y CONFIG_NF_CT_NETLINK=y CONFIG_SCSI_NETLINK=y gtwy linux # cat .config | grep IP_ADVANCED_ROUTER CONFIG_IP_ADVANCED_ROUTER=y gtwy linux # cat .config | grep INGRESS CONFIG_NET_SCH_INGRESS=y gtwy linux # cat .config | grep NET_SCHED CONFIG_NET_SCHED=y emerge --info Portage 2.1.9.25 (default/linux/amd64/10.0, gcc-4.1.2, glibc-2.10.1-r1, 2.6.36-gentoo-r5 x86_64) ================================================================= System uname: Linux-2.6.36-gentoo-r5-x86_64-Intel-R-_Xeon-R-_CPU_X3220_@_2.40GHz-with-gentoo-1.12.13 Timestamp of tree: Thu, 13 Jan 2011 01:15:01 +0000 app-shells/bash: 4.0_p37 dev-java/java-config: 1.3.7-r1, 2.1.10 dev-lang/python: 2.4.6, 2.5.4-r4, 2.6.5-r2, 3.1.2-r3 sys-apps/baselayout: 1.12.13 sys-apps/sandbox: 1.6-r2 sys-devel/autoconf: 2.13, 2.65 sys-devel/automake: 1.9.6-r2::<unknown repository>, 1.10.2, 1.11.1 sys-devel/binutils: 2.20.1-r1 sys-devel/gcc: 4.1.2, 4.3.4, 4.4.3-r2 sys-devel/gcc-config: 1.4.1 sys-devel/libtool: 2.2.6b sys-devel/make: 3.81 virtual/os-headers: 2.6.30-r1 (sys-kernel/linux-headers) ACCEPT_KEYWORDS="amd64" ACCEPT_LICENSE="*" CBUILD="x86_64-pc-linux-gnu" CFLAGS="-march=nocona -O2 -pipe" CHOST="x86_64-pc-linux-gnu" CONFIG_PROTECT="/etc /var/bind" CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/env.d/java/ /etc/fonts/fonts.conf /etc/gconf /etc/php/apache2-php5/ext-active/ /etc/php/cgi-php5/ext-active/ /etc/php/cli-php5/ext-active/ /etc/revdep-rebuild /etc/sandbox.d /etc/terminfo" CXXFLAGS="-march=nocona -O2 -pipe" DISTDIR="/usr/portage/distfiles" FEATURES="assume-digests binpkg-logs distlocks fixlafiles fixpackages news parallel-fetch protect-owned sandbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphans userfetch" GENTOO_MIRRORS="http://gentoo.chem.wisc.edu/gentoo" LC_ALL="en_US.UTF-8" LDFLAGS="-Wl,-O1 -Wl,--as-needed" LINGUAS="en" MAKEOPTS="-j5" PKGDIR="/usr/portage/packages" PORTAGE_CONFIGROOT="/" PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --stats --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages" PORTAGE_TMPDIR="/var/tmp" PORTDIR="/usr/portage" PORTDIR_OVERLAY="/usr/local/portage" SYNC="rsync://rsync.namerica.gentoo.org/gentoo-portage" USE="acl amd64 apache2 berkdb bzip2 cli cracklib crypt ctype cups curl cxx dri fortran gdbm gpm iconv jpeg jpeg2k libwww mmx modules mudflap multilib mysql ncurses nls nptl nptlonly openmp pam pcre perl php png pppd python readline session sockets sse sse2 ssl symlink sysfs tcpd threads unicode vhosts xml xorg xsl zlib" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mmap_emul mulaw multi null plug rate route share shm softvol" APACHE2_MODULES="actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache cgi cgid dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" ELIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf superstar2 timing tsip tripmate tnt ubx" INPUT_DEVICES="keyboard mouse evdev" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LINGUAS="en" PHP_TARGETS="php5-3" RUBY_TARGETS="ruby18" USERLAND="GNU" VIDEO_CARDS="fbdev glint intel mach64 mga neomagic nouveau nv r128 radeon savage sis tdfx trident vesa via vmware dummy v4l" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account" Unset: CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, FFLAGS, INSTALL_MASK, LANG, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS

  Read the article

• yum install php-tidy - no more mirrors

  - by Lylo

  Hi im trying to get the tidy extensions installed on centos running php 5.3 Thanks Downloading Packages: http://repo.webtatic.com/yum/centos/5/x86_64/php-tidy-5.3.5-1.w5.x86_64.rpm: [Errno 14] HTTP Error 404: Not Found Trying other mirror. http://repo.webtatic.com/yum/centos/5/x86_64/php-pdo-5.3.5-1.w5.x86_64.rpm: [Errno 14] HTTP Error 404: Not Found Trying other mirror. http://repo.webtatic.com/yum/centos/5/x86_64/php-mysql-5.3.5-1.w5.x86_64.rpm: [Errno 14] HTTP Error 404: Not Found Trying other mirror. http://repo.webtatic.com/yum/centos/5/x86_64/php-gd-5.3.5-1.w5.x86_64.rpm: [Errno 14] HTTP Error 404: Not Found Trying other mirror. http://repo.webtatic.com/yum/centos/5/x86_64/php-xml-5.3.5-1.w5.x86_64.rpm: [Errno 14] HTTP Error 404: Not Found Trying other mirror. http://repo.webtatic.com/yum/centos/5/x86_64/php-common-5.3.5-1.w5.x86_64.rpm: [Errno 14] HTTP Error 404: Not Found Trying other mirror. http://repo.webtatic.com/yum/centos/5/x86_64/php-devel-5.3.5-1.w5.x86_64.rpm: [Errno 14] HTTP Error 404: Not Found Trying other mirror. http://repo.webtatic.com/yum/centos/5/x86_64/php-5.3.5-1.w5.x86_64.rpm: [Errno 14] HTTP Error 404: Not Found Trying other mirror. http://repo.webtatic.com/yum/centos/5/x86_64/php-cli-5.3.5-1.w5.x86_64.rpm: [Errno 14] HTTP Error 404: Not Found Trying other mirror. Error Downloading Packages: php-tidy-5.3.5-1.w5.x86_64: failure: php-tidy-5.3.5-1.w5.x86_64.rpm from webtatic: [Errno 256] No more mirrors to try. php-cli-5.3.5-1.w5.x86_64: failure: php-cli-5.3.5-1.w5.x86_64.rpm from webtatic: [Errno 256] No more mirrors to try. php-5.3.5-1.w5.x86_64: failure: php-5.3.5-1.w5.x86_64.rpm from webtatic: [Errno 256] No more mirrors to try. php-pdo-5.3.5-1.w5.x86_64: failure: php-pdo-5.3.5-1.w5.x86_64.rpm from webtatic: [Errno 256] No more mirrors to try. php-devel-5.3.5-1.w5.x86_64: failure: php-devel-5.3.5-1.w5.x86_64.rpm from webtatic: [Errno 256] No more mirrors to try. php-mysql-5.3.5-1.w5.x86_64: failure: php-mysql-5.3.5-1.w5.x86_64.rpm from webtatic: [Errno 256] No more mirrors to try. php-common-5.3.5-1.w5.x86_64: failure: php-common-5.3.5-1.w5.x86_64.rpm from webtatic: [Errno 256] No more mirrors to try. php-xml-5.3.5-1.w5.x86_64: failure: php-xml-5.3.5-1.w5.x86_64.rpm from webtatic: [Errno 256] No more mirrors to try. php-gd-5.3.5-1.w5.x86_64: failure: php-gd-5.3.5-1.w5.x86_64.rpm from webtatic: [Errno 256] No more mirrors to try.

  Read the article

• What is causing the unusual high load average?

  - by James

  I noticed on Tuesday night of last week, the load average went up sharply and it seemed abnormal since the traffic is small. Usually, the numbers usually average around .40 or lower and my server stuff (mysql, php and apache) are optimized. I noticed that the IOWait is unusually high even though the processes is barely using any CPU. top - 01:44:39 up 1 day, 21:13, 1 user, load average: 1.41, 1.09, 0.86 Tasks: 60 total, 1 running, 59 sleeping, 0 stopped, 0 zombie Cpu0 : 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu1 : 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu2 : 0.0%us, 0.3%sy, 0.0%ni, 99.7%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu3 : 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu4 : 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu5 : 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu6 : 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu7 : 0.0%us, 0.0%sy, 0.0%ni, 91.5%id, 8.5%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 1048576k total, 331944k used, 716632k free, 0k buffers Swap: 0k total, 0k used, 0k free, 0k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1 root 15 0 2468 1376 1140 S 0 0.1 0:00.92 init 1656 root 15 0 13652 5212 664 S 0 0.5 0:00.00 apache2 9323 root 18 0 13652 5212 664 S 0 0.5 0:00.00 apache2 10079 root 18 0 3972 1248 972 S 0 0.1 0:00.00 su 10080 root 15 0 4612 1956 1448 S 0 0.2 0:00.01 bash 11298 root 15 0 13652 5212 664 S 0 0.5 0:00.00 apache2 11778 chikorit 15 0 2344 1092 884 S 0 0.1 0:00.05 top 15384 root 18 0 17544 13m 1568 S 0 1.3 0:02.28 miniserv.pl 15585 root 15 0 8280 2736 2168 S 0 0.3 0:00.02 sshd 15608 chikorit 15 0 8280 1436 860 S 0 0.1 0:00.02 sshd Here is the VMStat procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 1 0 0 768644 0 0 0 0 14 23 0 10 1 0 99 0 IOStat - Nothing unusal Total DISK READ: 67.13 K/s | Total DISK WRITE: 0.00 B/s TID PRIO USER DISK READ DISK WRITE SWAPIN IO COMMAND 19496 be/4 chikorit 11.85 K/s 0.00 B/s 0.00 % 0.00 % apache2 -k start 19501 be/4 mysql 3.95 K/s 0.00 B/s 0.00 % 0.00 % mysqld 19568 be/4 chikorit 11.85 K/s 0.00 B/s 0.00 % 0.00 % apache2 -k start 19569 be/4 chikorit 11.85 K/s 0.00 B/s 0.00 % 0.00 % apache2 -k start 19570 be/4 chikorit 11.85 K/s 0.00 B/s 0.00 % 0.00 % apache2 -k start 19571 be/4 chikorit 7.90 K/s 0.00 B/s 0.00 % 0.00 % apache2 -k start 19573 be/4 chikorit 7.90 K/s 0.00 B/s 0.00 % 0.00 % apache2 -k start 1 be/4 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % init 11778 be/4 chikorit 0.00 B/s 0.00 B/s 0.00 % 0.00 % top 19470 be/4 mysql 0.00 B/s 0.00 B/s 0.00 % 0.00 % mysqld Load Average Chart - http://i.stack.imgur.com/kYsD0.png I want to be sure if this is not a MySQL problem before making sure. Also, this is a Ubuntu 10.04 LTS Server on OpenVZ. Edit: This will probably give a good picture on the IO Wait top - 22:12:22 up 17:41, 1 user, load average: 1.10, 1.09, 0.93 Tasks: 33 total, 1 running, 32 sleeping, 0 stopped, 0 zombie Cpu(s): 0.6%us, 0.2%sy, 0.0%ni, 89.0%id, 10.1%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 1048576k total, 260708k used, 787868k free, 0k buffers Swap: 0k total, 0k used, 0k free, 0k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1 root 15 0 2468 1376 1140 S 0 0.1 0:00.88 init 5849 root 15 0 12336 4028 668 S 0 0.4 0:00.00 apache2 8063 root 15 0 12336 4028 668 S 0 0.4 0:00.00 apache2 9732 root 16 0 8280 2728 2168 S 0 0.3 0:00.02 sshd 9746 chikorit 18 0 8412 1444 864 S 0 0.1 0:01.10 sshd 9747 chikorit 18 0 4576 1960 1488 S 0 0.2 0:00.24 bash 13706 chikorit 15 0 2344 1088 884 R 0 0.1 0:00.03 top 15745 chikorit 15 0 12968 5108 1280 S 0 0.5 0:00.00 apache2 15751 chikorit 15 0 72184 25m 18m S 0 2.5 0:00.37 php5-fpm 15790 chikorit 18 0 12472 4640 1192 S 0 0.4 0:00.00 apache2 15797 chikorit 15 0 72888 23m 16m S 0 2.3 0:00.06 php5-fpm 16038 root 15 0 67772 2848 592 D 0 0.3 0:00.00 php5-fpm 16309 syslog 18 0 24084 1316 992 S 0 0.1 0:00.07 rsyslogd 16316 root 15 0 5472 908 500 S 0 0.1 0:00.00 sshd 16326 root 15 0 2304 908 712 S 0 0.1 0:00.02 cron 17464 root 15 0 10252 7560 856 D 0 0.7 0:01.88 psad 17466 root 18 0 1684 276 208 S 0 0.0 0:00.31 psadwatchd 17559 root 18 0 11444 2020 732 S 0 0.2 0:00.47 sendmail-mta 17688 root 15 0 10252 5388 1136 S 0 0.5 0:03.81 python 17752 teamspea 19 0 44648 7308 4676 S 0 0.7 1:09.70 ts3server_linux 18098 root 15 0 12336 6380 3032 S 0 0.6 0:00.47 apache2 18099 chikorit 18 0 10368 2536 464 S 0 0.2 0:00.00 apache2 18120 ntp 15 0 4336 1316 984 S 0 0.1 0:00.87 ntpd 18379 root 15 0 12336 4028 668 S 0 0.4 0:00.00 apache2 18387 mysql 15 0 62796 36m 5864 S 0 3.6 1:43.26 mysqld 19584 root 15 0 12336 4028 668 S 0 0.4 0:00.02 apache2 22498 root 16 0 12336 4028 668 S 0 0.4 0:00.00 apache2 24260 root 15 0 67772 3612 1356 S 0 0.3 0:00.22 php5-fpm 27712 root 15 0 12336 4028 668 S 0 0.4 0:00.00 apache2 27730 root 15 0 12336 4028 668 S 0 0.4 0:00.00 apache2 30343 root 15 0 12336 4028 668 S 0 0.4 0:00.00 apache2 30366 root 15 0 12336 4028 668 S 0 0.4 0:00.00 apache2 This is the free ram as of today. total used free shared buffers cached Mem: 1024 302 721 0 0 0 -/+ buffers/cache: 302 721 Swap: 0 0 0 Update: Looking into the logs, particularly the PHP5-FPM, which is causing the CPU spike. I found that its segment faulting for some apparent reason. [03-Jun-2012 06:11:20] NOTICE: [pool www] child 14132 started [03-Jun-2012 06:11:25] WARNING: [pool www] child 13664 exited on signal 11 (SIGSEGV) after 53.686322 seconds from start [03-Jun-2012 06:11:25] NOTICE: [pool www] child 14328 started [03-Jun-2012 06:11:25] WARNING: [pool www] child 14132 exited on signal 11 (SIGSEGV) after 4.708681 seconds from start [03-Jun-2012 06:11:25] NOTICE: [pool www] child 14329 started [03-Jun-2012 06:11:58] WARNING: [pool www] child 14328 exited on signal 11 (SIGSEGV) after 32.981228 seconds from start [03-Jun-2012 06:11:58] NOTICE: [pool www] child 15745 started [03-Jun-2012 06:12:25] WARNING: [pool www] child 15745 exited on signal 11 (SIGSEGV) after 27.442864 seconds from start [03-Jun-2012 06:12:25] NOTICE: [pool www] child 17446 started [03-Jun-2012 06:12:25] WARNING: [pool www] child 14329 exited on signal 11 (SIGSEGV) after 60.411278 seconds from start [03-Jun-2012 06:12:25] NOTICE: [pool www] child 17447 started [03-Jun-2012 06:13:02] WARNING: [pool www] child 17446 exited on signal 11 (SIGSEGV) after 36.746793 seconds from start [03-Jun-2012 06:13:02] NOTICE: [pool www] child 18133 started [03-Jun-2012 06:13:48] WARNING: [pool www] child 17447 exited on signal 11 (SIGSEGV) after 82.710107 seconds from start I'm thinking that this might be causing the problem. If that is the cause, probably switching it off that to fastcgi/fcgid might resolve it... but still, I want to see if something else might be causing it to do this.

  Read the article

• How to determine most stable Cisco IOS release?

  - by Chris J

  This post is about a Catalyst 4948E switch. I was looking on the download page and realized that there are no "GD" versions available. Are the "ED" versions stable? Even if you change "ED" to "GD" in the URL the IOS images are still the same. http://www.cisco.com/cisco/software/release.html?mdfid=283027810&flowid=3592&softwareid=280805680&release=15.1.1-SG2&relind=AVAILABLE&rellifecycle=ED&reltype=latest Is 15.1 as reliable as 15.0? My devices are currently on the 12.2 train. Is there anything special to upgrade to one of the 15.x trains? Are the configurations compatible.

  Read the article

• Drupal Migration Problem

  - by Gok Demir

  After migrating my Drupal (6.16) installation from shared hosting to Linode VPS (Ubunto 10.04 32 bit). Whenever I click a URL it shows only the homepage. I put ?q=user at the end of the URL to login as an admin. When I logged in it is the same. I couldn't navigate to any URL. It shows only homepage. I forgot to clean Drupal cache before migration. Is it because of this? I couldn't navigate to Administer Site configuration Performance to clean cache, nothing works. By the way .htaccess Rewrite on enabled as shown below. apache2 apache2-doc apache2-utils libapache2-mod-php5 php5 php-pear php5-xcache php5-suhosin php5-mysql packages are installed. What can I do? # # Apache/PHP/Drupal settings: # # Protect files and directories from prying eyes. <FilesMatch "\.(engine|inc|info|install|make|module|profile|test|po|sh|.*sql|theme|tpl(\.php)?|xtmpl|svn-base)$|^(code-style\.pl|Entries.*|Repository|Root|Tag|Template|all-wcprops|entries|format)$"> Order allow,deny </FilesMatch> # Don't show directory listings for URLs which map to a directory. Options -Indexes # Follow symbolic links in this directory. Options +FollowSymLinks # Make Drupal handle any 404 errors. ErrorDocument 404 /index.php # Force simple error message for requests for non-existent favicon.ico. <Files favicon.ico> # There is no end quote below, for compatibility with Apache 1.3. ErrorDocument 404 "The requested file favicon.ico was not found. </Files> # Set the default handler. DirectoryIndex index.php # Override PHP settings. More in sites/default/settings.php # but the following cannot be changed at runtime. # PHP 4, Apache 1. <IfModule mod_php4.c> php_value magic_quotes_gpc 0 php_value register_globals 0 php_value session.auto_start 0 php_value mbstring.http_input pass php_value mbstring.http_output pass php_value mbstring.encoding_translation 0 </IfModule> # PHP 4, Apache 2. <IfModule sapi_apache2.c> php_value magic_quotes_gpc 0 php_value register_globals 0 php_value session.auto_start 0 php_value mbstring.http_input pass php_value mbstring.http_output pass php_value mbstring.encoding_translation 0 </IfModule> # PHP 5, Apache 1 and 2. <IfModule mod_php5.c> php_value magic_quotes_gpc 0 php_value register_globals 0 php_value session.auto_start 0 php_value mbstring.http_input pass php_value mbstring.http_output pass php_value mbstring.encoding_translation 0 </IfModule> # Requires mod_expires to be enabled. <IfModule mod_expires.c> # Enable expirations. ExpiresActive On # Cache all files for 2 weeks after access (A). ExpiresDefault A1209600 <FilesMatch \.php$> # Do not allow PHP scripts to be cached unless they explicitly send cache # headers themselves. Otherwise all scripts would have to overwrite the # headers set by mod_expires if they want another caching behavior. This may # fail if an error occurs early in the bootstrap process, and it may cause # problems if a non-Drupal PHP file is installed in a subdirectory. ExpiresActive Off </FilesMatch> </IfModule> # Various rewrite rules. <IfModule mod_rewrite.c> RewriteEngine on # If your site can be accessed both with and without the 'www.' prefix, you # can use one of the following settings to redirect users to your preferred # URL, either WITH or WITHOUT the 'www.' prefix. Choose ONLY one option: # # To redirect all users to access the site WITH the 'www.' prefix, # (http://example.com/... will be redirected to http://www.example.com/...) # adapt and uncomment the following: # RewriteCond %{HTTP_HOST} ^example\.com$ [NC] # RewriteRule ^(.*)$ http://www.example.com/$1 [L,R=301] # # To redirect all users to access the site WITHOUT the 'www.' prefix, # (http://www.example.com/... will be redirected to http://example.com/...) # uncomment and adapt the following: # RewriteCond %{HTTP_HOST} ^www\.example\.com$ [NC] # RewriteRule ^(.*)$ http://example.com/$1 [L,R=301] # Modify the RewriteBase if you are using Drupal in a subdirectory or in a # VirtualDocumentRoot and the rewrite rules are not working properly. # For example if your site is at http://example.com/drupal uncomment and # modify the following line: # RewriteBase /drupal # # If your site is running in a VirtualDocumentRoot at http://example.com/, # uncomment the following line: # RewriteBase / # Rewrite URLs of the form 'x' to the form 'index.php?q=x'. RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_URI} !=/favicon.ico RewriteRule ^(.*)$ index.php?q=$1 [L,QSA] </IfModule>

  Read the article

• Problem using graphics.h in Ubuntu

  - by blooooomer

  # include<stdio.h> # include<graphics.h> # include<math.h> using namespace std; int main(void) { int gd=DETECT,gm; int r,x,y,p,xc=320,yc=240; initgraph(&gd,&gm,NULL); cleardevice(); printf("Enter the radius "); scanf("%d",&r); x=0; y=r; putpixel(xc+x,yc-y,1); p=3-(2*r); for(x=0;x<=y;x++) { if (p<0) { y=y; p=(p+(4*x)+6); } else { y=y-1; p=p+((4*(x-y)+10)); } putpixel(xc+x,yc-y,1); putpixel(xc-x,yc-y,2); putpixel(xc+x,yc+y,3); putpixel(xc-x,yc+y,4); putpixel(xc+y,yc-x,5); putpixel(xc-y,yc-x,6); putpixel(xc+y,yc+x,7); putpixel(xc-y,yc+x,8); } getch(); closegraph(); } installed graphics.h compiled using gcc filename.cpp -0 filename -lgraph then used ./filename the window apperared for 10 seconds and the error below appears: [xcb] Unknown sequence number while processing queue [xcb] Most likely this is a multi-threaded client and XInitThreads has not been called [xcb] Aborting, sorry about that. heart: ../../src/xcb_io.c:273: poll_for_event: Assertion `!xcb_xlib_threads_sequence_lost' failed. Aborted Any solutions?

  Read the article

• Xdebug configuration with PHP fastcgi and eclipse?

  - by mac

  I have been using eclipse-pdt in conjunction with xdebug and apache without problems, for over one year. Things worked flawlessly and I could do all the interactive debugging I wanted from within eclipse (using my own machine as a server). Now I switched from apache to nginx (and therefore PHP runs now not as an Apache service but as fast-cgi) and I can't find a way to configure eclipse to work nicely with xdebug. I am neither sure if the problem is with xdebug or with eclipse (or both) to be sure. In the eclipse configuration I already changed the reference to the PHP configuration file to /etc/php5/cli/php.ini. Attempts with php.ini version 1 With the following php.ini file zend_extension=/usr/lib/php5/20060613/xdebug.so I see that xdebug is working (for example if I do a var_dump() I get the xdebug version of it, not the plain PHP one) I can't have the interactive debugging from eclipse: the browser opens up and loads the page completely with the typical URL containing ...?XDEBUG_SESSION_START=ECLIPSE_DBGP&KEY=..., but the program execution does not stop at breakpoints In the bottom-right corner of eclipse I see a suspicious message: *"Launching =put_the_name_of_my_project_here=: 57%"* that alternates with the "refreshing workspace" one. Attempts with php.ini version 2 If I use this other version of the file (which is what it worked until I switched to nginx): zend_extension=/usr/lib/php5/20060613/xdebug.so xdebug.remote_enable=On xdebug.remote_autostart=On xdebug.remote_handler=dbgp xdebug.remote_host=localhost xdebug.remote_port=9000 xdebug.remote_mode=req I can't access any page of my sites at all. Any help or suggestion appreciated, thank you in advance for your time! PS: Additional data on my machine: - OS: GNU/Linux - Ubuntu 9.10 64 bit. - PHP: 5.2.10-2ubuntu6.3 with Suhosin-Patch 0.9.7; Zend Engine v2.2.0, Copyright (c) 1998-2009 Zend Technologies with Xdebug v2.0.4 - Eclipse: see screenshot.

  Read the article

• php.ini file creation in server

  - by tibin mathew

  Hi, I am developing a php website. I cant see php.ini file in my server. my host will not provide it. So i'm now going to create a copy of that php.ini file. so i have tried system() i searched in google and i got this link. http://drupal.org/node/290592 Here they are using like this system("cp /usr/local/php5/lib/php.ini /home/YOURUSERNAME/php.ini"); in my server when i looked the phpinfo my php.ini location is /ms/svc/php5/conf/php.ini and when i looked for the current directory of my server using this $dir_path = str_replace( $_SERVER['DOCUMENT_ROOT'], "", dirname(realpath(FILE)) ) . DIRECTORY_SEPARATOR; i got my current directory as /netapp/whnas-swamp/s11/s11/01712/www.sample.com/webdocs/ so my system command will now look lke this system("/ms/svc/php5/conf/php.ini /netapp/whnas-swamp/s11/s11/01712/www.sample.com/webdocs/php.ini"); i have named this page as getthephpini.php and when i b rowse this page i got a blank page but no new php.ini file created in my server. Is any mistake in that code??? Can any one show me the correct way Please help me Thanks

  Read the article

• Get current PHP executable from within script?

  - by benizi

  I want to run a PHP cli program from within PHP cli. On some machines where this will run, both php4 and php5 are installed. If I run the outer program as php5 outer.php I want the inner script to be run with the same php version. In Perl, I would use $^X to get the perl executable. It appears there's no such variable in PHP? Right now, I'm using $_SERVER['_'], because bash (and zsh) set the environment variable $_ to the last-run program. But, I'd rather not rely on a shell-specific idiom. UPDATE: Version differences are but one problem. If PHP isn't in PATH, for example, or isn't the first version found in PATH, the suggestions to find the version information won't help. Additionally, csh and variants appear to not set the $_ environment variable for their processes, so the workaround isn't applicable there. UPDATE 2: I was using $_SERVER['_'], until I discovered that it doesn't do the right thing under xargs (which makes sense... zsh sets it to the command it ran, which is xargs, not php5, and xargs doesn't change the variable). Falling back to using: $version = explode('.', phpversion()); $phpcli = "php{$version[0]}";

  Read the article

• php.ini on goDaddy

  - by Afrosimon

  Hey all, I've got a little problem on a goDaddy server. I have a php script (ajaxCRUD) in which there's an upload field, and I can't get it to accept file over the default limit. I always get this (when I output the $_FILE[$fieldname]) : array(5) { ["name"]=> string(13) "children2.mp3" ["type"]=> string(0) "" ["tmp_name"]=> string(0) "" ["error"]=> int(1) ["size"]=> int(0) } Things I tried : Added a parameter in the HTML form ([...]name="MAX_FILE_SIZE" value="10000000"[...]) Changed the php5.ini at the root of the server, to no avail. After a phpinfo(), no differences are seen, even though the phpinfo clearly indicate it is reading the same php5.ini : [...]/html/php5.ini. Here is what I added in this file : upload_tmp_dir = ./temp upload_max_filesize = 20M Anything under 2M (the default value) is okay, so there's no problem with the upload path or file permission. I don't have any more idea for the moment, do any of you has one?

  Read the article

• PHP 5.3.1 Undefined Symbol: OnUpdateLong error on Apache Startup

  - by docgnome

  I'm running Ubuntu 8.04 on this server. I had PHP 5.2 installed via the package manager. I removed it to install PHP 5.3.1 by hand. I built the packages like so ./configure --prefix=/opt/php --with-mysql --with-curl=/usr/bin --with-apxs2=/usr/bin/apxs2 make make install This installed PHP 5.3.1 in /opt/php/ $ php -v PHP 5.3.1 (cli) (built: Dec 7 2009 10:51:14) Copyright (c) 1997-2009 The PHP Group Zend Engine v2.3.0, Copyright (c) 1998-2009 Zend Technologies However, when I try to start Apache I get this. # /etc/init.d/apache2 restart * Restarting web server apache2 apache2: Syntax error on line 185 of /etc/apache2/apache2.conf: Syntax error on line 1 of /etc/apache2/mods-enabled/php5.load: Cannot load /usr/lib/apache2/modules/libphp5.so into server: /usr/lib/apache2/modules/libphp5.so: undefined symbol: OnUpdateLong [fail] Any ideas what's causing this error? All the references I can see have to do with building php5 packages for php4 or the like. PHP4 has never been installed on this machine.

  Read the article

• Fatal error: Incompatible file format: The encoded file has format major ID 1, whereas the Loader expects 4 in ... on line 0

  - by Eugene

  I am using Ubuntu 10.04 and for some time I had to keep a downgraded PHP 5.2 package because I need to run Zend encrypted scripts. Recently I noticed that Zend released beta version of their loader (http://forums.zend.com/viewtopic.php?f=57&t=1365&start=80#p22073) so I updated to the native PHP 5.3 package, downloaded the .so file, added this to php.ini ;zend_extension=/etc/php5/ZendOptimizer.so zend_extension=/etc/php5/ZendGuardLoader.so zend_loader.enable=1 zend_loader.disable_licensing=0 zend_loader.obfuscation_level_support=3 and restarted the server. Now I am getting this error: Fatal error: Incompatible file format: The encoded file has format major ID 1, whereas the Loader expects 4 in ... on line 0 Do you by chance know an easy fix for this? Or should I downgrade back and wait till when they release something more stable?

  Read the article

• SUSE 12.1 Apache startup after oci8 installation

  - by DKSan

  I have got a virtual server running opensuse 11.4 with apache, php, oracle instantclient, and oci installed through pecl. The steps it took for me to have it up and running on 11.4 were: # Install instantclient rpm -Uvh oracle-instantclient11.2-basic-11.2.0.2.0.x86_64.rpm rpm -Uvh oracle-instantclient11.2-devel-11.2.0.2.0.x86_64.rpm # Install OCI8 through pecl pecl install oci8 # add oci8 to modules vi /etc/php5/conf.d/oci8.ini extension=oci8.so # add LD_LIBRARY_PATH to apache vi /etc/sysconfig/apache2 # add to bottom of script export LD_LIBRARY_PATH="/usr/lib/oracle/11.2/client64/lib" # restart Apache /etc/init.d/apache2 restart Celebrating the same procedure on a fresh installation of OpenSUSE 12.1 results in apache throwing the following message at startup: PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib64/php5/extensions/oci8.so' - libnnz11.so: cannot open shared object file: No such file or directory in Unknown on line 0 I can't get any explanation, why it is working for 11.4 and in 12.1 it stops working. Can someone please point me in the right direction..

  Read the article

• mod-wsgi with pylons on apache with preload?

  - by Tim

  Is there a way to get this working with preload? mod-php5 requires preload.

  Read the article

• autocomplete not working on one sever, works on others

  - by dogmatic69

  I have Ubuntu 10.10 x64 and x86 running on various servers and auto complete works on all of them bar one. The issue: apt-<tab> would show a list of options but sudo apt-<tab> would not. After fiddling with it for a few hours i've found that /etc/bash_autocomplete did not exist. on the broken server. Copying the one from a working one it now works. but still not properly. sudo apt-get ins<tab> does not show do anything. listing the files in /etc/bash_autocomplete.d/ on the working server has about 50 files, and the broken one only two or three. i dont think that i can just copy these files though as it might show commands for things that are not even installed. TL;DR autocomplete broken, how can i fix it. Seems like its disabled somewhere, why is this EDIT: Ok, it was not ever installed... $ sudo apt-get install bash-completion Reading package lists... Done Building dependency tree Reading state information... Done The following NEW packages will be installed bash-completion 0 upgraded, 1 newly installed, 0 to remove and 3 not upgraded. Need to get 140kB of archives. After this operation, 1,061kB of additional disk space will be used. Get:1 http://archive.ubuntu.com/ubuntu/ maverick-updates/main bash-completion all 1:1.2-2ubuntu1.1 [140kB] Fetched 140kB in 0s (174kB/s) Selecting previously deselected package bash-completion. (Reading database ... 23808 files and directories currently installed.) Unpacking bash-completion (from .../bash-completion_1%3a1.2-2ubuntu1.1_all.deb) ... Processing triggers for man-db ... Setting up bash-completion (1:1.2-2ubuntu1.1) ... its now kinda working, but still wonky... apt-get ins<tab> gives sudo apt-get insserv as the option. also apt-get install php5<tab> gives apt-get install php5/ not php5-* options.

  Read the article

< Previous Page | 53 54 55 56 57 58 59 60 61 62 63 64  | Next Page >