Search Results

Search found 2741 results on 110 pages for 'progress'.

Page 57/110 | < Previous Page | 53 54 55 56 57 58 59 60 61 62 63 64  | Next Page >

  • Can't enable wireless lan on Fujitsu Siemens A1665G with Ubuntu 11.10 installed

    - by Theo
    I saw my old Notebook yesterday and wanted to make that work again. On Windows XP the wireless worked still fine. Then I installed new Ubuntu 11.10 32bit and I'm sadly not able to make the wireless enabled. [I replaced Win XP entirely] lspci lists following network: 08:0a.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02) So after recommendation from this link I installed the b43 firmware module. iwconfig prints the following: wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associatd Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Power Management: off As you can see, my wireless lan adapter is not turned on. sudo iwconfig wlan0 txpower auto Doesn't change anything. Then I tried to make it work with rfkill. rfkill list 0: phy0: Wirless LAN Soft blocked: no Hard blocked: yes sudo rfkill unblock all rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes remains the same. The question is now, how I could enable the hard blocked wireless LAN. There is no hardware switch for wlan integrated. However there is a button to change the state. I always thought this would be software sided, but it seems to make some hardware changes as well... The wireless LED is also not blinking (as it did on windows xp) I reset bios and searched for some settings in there, but it has only a few options and nothing to do with wireless settings, nothing works here.. At last I tried to install the acer hotkeys but I was not able to manage that. I installed the acerhkgui package, but in initializing progress, it was not able to compile acer hotkeys for my machine. There was a message that asm/linkage.h was not found while compiling. Do you have any ideas what I could do to make this hard blocked stuff disabled and my wireless card work? PS: I also tried sudo rm /dev/rfkill and a reboot to reinit that stuff... No success :(

    Read the article

  • What are the maths behind 'Raiden 2' purple laser?

    - by Aybe
    The path of the laser is affected by user input and enemies present on the screen. Here is a video, at 5:00 minutes the laser in question is shown : Raiden II (PS) - 1 Loop Clear - Part 2 UPDATE Here is a test using Inkscape, ship is at bottom, the first 4 enemies are targeted by the plasma. There seems to be a sort of pattern. I moved the ship first, then the handle from it to form a 45° angle, then while trying to fit the curve I found a pattern of parallel handles and continued so until I reached the last enemy. Update, 5/26/2012 : I started an XNA project using beziers, there is still some work needed, will update the question next week. Stay tuned ! Update : 5/30/2012 : It really seems that they are using Bézier curves, I think I will be able to replicate/imitate a plasma of such grade. There are two new topics I discovered since last time : Arc length, Runge's phenomenon, first one should help in having a linear movement possible over a Bézier curve, second should help in optimizing the number of vertices. Next time I will put a video so you can see the progress 8-)

    Read the article

  • Marshalling the value of a char* ANSI string DLL API parameter into a C# string

    - by Brian Biales
    For those who do not mix .NET C# code with legacy DLL's that use char* pointers on a regular basis, the process to convert the strings one way or the other is non-obvious. This is not a comprehensive article on the topic at all, but rather an example of something that took me some time to go find, maybe it will save someone else the time. I am utilizing a third party too that uses a call back function to inform my application of its progress.  This callback includes a pointer that under some circumstances is a pointer to an ANSI character string.  I just need to marshal it into a C# string variable.  Seems pretty simple, yes?  Well, it is, (as are most things, once you know how to do them). The parameter of my callback function is of type IntPtr, which implies it is an integer representation of a pointer.  If I know the pointer is pointing to a simple ANSI string, here is a simple static method to copy it to a C# string: private static string GetStringFromCharStar(IntPtr ptr) {     return System.Runtime.InteropServices.Marshal.PtrToStringAnsi(ptr); } The System.Runtime.InteropServices is where to look any time you are mixing legacy unmanaged code with your .NET application.

    Read the article

  • CodePlex Daily Summary for Friday, June 06, 2014

    CodePlex Daily Summary for Friday, June 06, 2014Popular ReleasesVirto Commerce Enterprise Open Source eCommerce Platform (asp.net mvc): Virto Commerce 1.10: Virto Commerce Community Edition version 1.10. To install the SDK package, please refer to SDK getting started documentation To configure source code package, please refer to Source code getting started documentation This release includes bug fixes and improvements (including Commerce Manager localization and https support). More details about this release can be found on our blog at http://blog.virtocommerce.com.Load Runner - HTTP Pressure Test Tool: Load Runner 1.3: 1. gracefully stop distributed engine 2. added error handling for distributed load tasks if fail to send the tasks. 3. added easter egg ;-) NPOI: NPOI 2.1: Assembly Version: 2.1.0 New Features a. XSSFSheet.CopySheet b. Excel2Html for XSSF c. insert picture in word 2007 d. Implement IfError function in formula engine Bug Fixes a. fix conditional formatting issue b. fix ctFont order issue c. fix vertical alignment issue in XSSF d. add IndexedColors to NPOI.SS.UserModel e. fix decimal point issue in non-English culture f. fix SetMargin issue in XSSF g.fix multiple images insert issue in XSSF h.fix rich text style missing issue in XSSF i. fix cell...HigLabo: HigLabo_20140605: Modify AsciiCharOnly method implementation. Code clean up of RssItem.Description.51Degrees - Device Detection and Redirection: 3.1.2.3: Version 3.1 HighlightsDevice detection algorithm is over 100 times faster. Regular expressions and levenshtein distance calculations are no longer used. The device detection algorithm performance is no longer limited by the number of device combinations contained in the dataset. Two modes of operation are available: Memory – the detection data set is loaded into memory and there is no continuous connection to the source data file. Slower initialisation time but faster detection performanc...CS-Script for Notepad++ (C# intellisense and code execution): Release v1.0.27.0: CodeMap now indicates the type name for all members Implemented running scripts 'as administrator'. Just add '//css_npp asadmin' to the script and run it as usual. 'Prepare script for distribution' now aggregates script dependency assemblies. Various improvements in CodeSnipptet, Autcompletion and MethodInfo interactions with each other. Added printing line number for the entries in CodeMap (subject of configuration value) Improved debugging step indication for classless scripts ...Kartris E-commerce: Kartris v2.6003: Bug fixes: Fixed issue where category could not be saved if parent categories not altered Updated split string function to 500 chars otherwise problems with attribute filtering in PowerPack Improvements: If a user has group pricing below that available through qty discounts, that will show in place of the qty discountClosedXML - The easy way to OpenXML: ClosedXML 0.72.3: 70426e13c415 ClosedXML for .Net 4.0 now uses Open XML SDK 2.5 b9ef53a6654f Merge branch 'master' of https://git01.codeplex.com/forks/vbjay/closedxml 727714e86416 Fix range.Merge(Boolean) for .Net 3.5 eb1ed478e50e Make public range.Merge(Boolean checkIntersects) 6284cf3c3991 More performance improvements when saving.SEToolbox: SEToolbox 01.032.018 Release 1: Added ability to merge/join two ships, regardless of origin. Added Language selection menu to set display text language (for SE resources only), and fixed inherent issues. Added full support for Dedicated Servers, allowing use on PC without Steam present, and only the Dedicated Server install. Added Browse button for used specified save game selection in Load dialog. Installation of this version will replace older version.DNN Blog: 06.00.07: Highlights: Enhancement: Option to show management panel on child modules Fix: Changed SPROC and code to ensure the right people are notified of pending comments. (CP-24018) Fix: Fix to have notification actions authentication assume the right module id so these will work from the messaging center (CP-24019) Fix: Fix to issue in categories in a post that will not save when no categories and no tags selectedTEncoder: 4.0.0: --4.0.0 -Added: Video downloader -Added: Total progress will be updated more smoothly -Added: MP4Box progress will be shown -Added: A tool to create gif image from video -Added: An option to disable trimming -Added: Audio track option won't be used for mpeg sources as default -Fixed: Subtitle position wasn't used -Fixed: Duration info in the file list wasn't updated after trimming -Updated: FFMpegVeraCrypt: VeraCrypt version 1.0d: Changes between 1.0c and 1.0d (03 June 2014) : Correct issue while creating hidden operating system. Minor fixes (look at git history for more details).Microsoft Web Protection Library: AntiXss Library 4.3.0: Download from nuget or the Microsoft Download Center This issue finally addresses the over zealous behaviour of the HTML Sanitizer which should now function as expected once again. HTML encoding has been changed to safelist a few more characters for webforms compatibility. This will be the last version of AntiXSS that contains a sanitizer. Any new releases will be encoding libraries only. We recommend you explore other sanitizer options, for example AntiSamy https://www.owasp.org/index....Z SqlBulkCopy Extensions: SqlBulkCopy Extensions 1.0.0: SqlBulkCopy Extensions provide MUST-HAVE methods with outstanding performance missing from the SqlBulkCopy class like Delete, Update, Merge, Upsert. Compatible with .NET 2.0, SQL Server 2000, SQL Azure and more! Bulk MethodsBulkDelete BulkInsert BulkMerge BulkUpdate BulkUpsert Utility MethodsGetSqlConnection GetSqlTransaction You like this library? Find out how and why you should support Z Project Become a Memberhttp://zzzproject.com/resources/images/all/become-a-member.png|ht...Tweetinvi a friendly Twitter C# API: Tweetinvi 0.9.3.x: Timelines- Added all the parameters available from the Timeline Endpoints in Tweetinvi. - This is available for HomeTimeline, UserTimeline, MentionsTimeline // Simple query var tweets = Timeline.GetHomeTimeline(); // Create a parameter for queries with specific parameters var timelineParameter = Timeline.CreateHomeTimelineRequestParameter(); timelineParameter.ExcludeReplies = true; timelineParameter.TrimUser = true; var tweets = Timeline.GetHomeTimeline(timelineParameter); Tweetinvi 0.9.3.1...Sandcastle Help File Builder: Help File Builder and Tools v2014.5.31.0: General InformationIMPORTANT: On some systems, the content of the ZIP file is blocked and the installer may fail to run. Before extracting it, right click on the ZIP file, select Properties, and click on the Unblock button if it is present in the lower right corner of the General tab in the properties dialog. This release completes removal of the branding transformations and implements the new VS2013 presentation style that utilizes the new lightweight website format. Several breaking cha...Image View Slider: Image View Slider: This is a .NET component. We create this using VB.NET. Here you can use an Image Viewer with several properties to your application form. We wish somebody to improve freely. Try this out! Author : Steven Renaldo Antony Yustinus Arjuna Purnama Putra Andre Wijaya P Martin Lidau PBK GENAP 2014 - TI UKDWAspose for Apache POI: Missing Features of Apache POI WP - v 1.1: Release contain the Missing Features in Apache POI WP SDK in Comparison with Aspose.Words for dealing with Microsoft Word. What's New ?Following Examples: Insert Picture in Word Document Insert Comments Set Page Borders Mail Merge from XML Data Source Moving the Cursor Feedback and Suggestions Many more examples are yet to come here. Keep visiting us. Raise your queries and suggest more examples via Aspose Forums or via this social coding site.babelua: 1.5.6.0: V1.5.6.0 - 2014.5.30New feature: support quick-cocos2d-x project now; support text search in scripts folder now, you can use this function in Search Result Window;Credit Component: Credit Component: This is a sample release of Credit Component that has been made by Microsoft Visual Studio 2010. To try and use it, you need .NET framework 4.0 and Microsoft Visual Studio 2010 or newer as a minimum requirement in this download you will get media player as a sample application that use this component credit component as a main component media player source code as source code and sample usage of credit component credit component source code as source code of credit component important...New ProjectsBack Up Your SharePoint: SPSBackUp is a PowerShell script tool to Backup your SharePoint environment. It's compatible with SharePoint 2010 & 2013.ChoMy: mrkidconsoledemo: a basic app about the knowledge in c# domainDecision Architect Server Client in C#: This project is a client for Decision Architect Server API.InnVIDEO365 Agile SharePoint-Kaltura App: InnVIDEO365 Agile SharePoint - Kaltura App for SharePoint Online is a complete video content solution for Microsoft SharePoint Online.JacOS: JacOS is an open-source operating system created with COSMOSKISS Workflow Foundation: This project was born from the idea that everyone should be able to use Workflow Foundation in best conditions. It contain sample to take WF jump start!Media Player (Technology Area): A now simple, yet somehow complex music, photo viewer I have some plans for the best tools for the player in the futureMetalurgicaInstitucional: MetalurgicaInstitucionalmoodlin8: Moodlin8 try to exploit significant parts of Moodle, the popular LMS, in a mobile or fixed environment based on the Modern Interface of Windows 8.1.NewsletterSystem: This is a test projectpesho2: Ala bala portokalaProyecto web Lab4 Gioia lucas: proyecto para lab4 utn pachecoRallyRacer: TSD Rally Compute helperVideo-JS Webpart for Sharepoint: Video-JS Webpart for SharepointYanZhiwei_CSharp_UtilHelp: ??C#???????????API: ????? Web API

    Read the article

  • Cannot copy MP3 files from a CD

    - by MountainX
    I purchased a set of spoken word audio CD's that have MP3 and FLAC audio files; I think they also play as regular audio CD's because I see a CDA directory and .cda files. But I'm only interested in playing the MP3 files by copying them to my phone. Dolphin file manager shows all the files on the CD. However, it will not copy any of them to my hard drive, which is what my goal is. Dolphin shows no error, but the copy progress is zero. Amarok will play the files but not easily. I only tried the flac files. To play a file, I click the file in Dolphin, then I have to cancel a job using KDE's notification system, then Amarok proceeds to copy the file to a tmp directory which takes a long time, then it finally plays. kb3 will rip the audio, but I would prefer to copy the files directly from the CD. Since Dolphin would not copy the files, I thought I would try the terminal, but I can't get that to work either. mount -t auto -o ro /dev/sr0 /mnt/temp that gives the error: wrong fs type, bad option, bad superblock, etc. I get the same error using -t iso9660 and -t udf. so I started troubleshooting: ~$ wodim --devices wodim: Overview of accessible drives (1 found) : ------------------------------------------------------------------------- 0 dev='/dev/sg1' rwrw-- : 'MATSHITA' 'DVD-RAM UJ8A0AS' ------------------------------------------------------------------------- /dev/sg1 is not a block device sudo file -s /dev/sr0 ERROR: cannot read /dev/sr0 (input/output error) sudo file -s /dev/sg1 just hangs How can I copy these files to my computer hard disk?

    Read the article

  • What are the best strategies for selling Android apps?

    - by Rob S.
    I'm a young developer hoping to sell my apps I made for Android soon. My applications are basically 99% finished so I'm investigating what would be the best marketing strategy to use to sell my apps. I'm sure the brilliant minds here can give me some great advice. I'm particularly interested in your thoughts on the following points (especially from experienced Android developers): Is it more profitable to sell an app for free with ads or to sell an app without ads for a price? Perhaps a combination of a free ad version and a paid ad-free version? If you give away an app for free with ads on it is it ethical to decline bending over backwards to support it? How much does piracy actually affect potential sales? Should any effort be put towards preventing it? Can you still make a profit off your application if you make it open source? Could you perhaps make more of a profit from the attention you would get by doing so? Is Google's Android Marketplace really the best place to release Android apps? It is worthwhile enough to maintain a developer blog or website to keep users updated on your development progress and software releases? Any other suggestions you could give me to maximize profit meanwhile keeping users happy and coming back for more would also be greatly appreciated. While I appreciate general tips and tricks, I'd like to ask that if possible you please go the extra step and show how they specifically apply to selling Android apps. Marketing statistics, developer retrospect, and any additional experience you can share from your time selling Android apps is what I would love to see most. Thank you very much in advance for your time. I truly appreciate all the responses I receive.

    Read the article

  • Two JavaFX Community Rock Stars Join Oracle

    - by Tori Wieldt
    from Sharat Chander, Director - Java Technology Outreach: These past 24+ months have proved momentous for Oracle's stewardship of Java.  A little over 2 years ago when Oracle completed its acquisition of Sun, a lot of community speculation arose regarding Oracle's Java commitment.  Whether the fears and concerns were legitimate or not, the only way to emphatically demonstrate Oracle's seriousness with moving Java forward was through positive action.  In 2010, Oracle committed to putting Java back on schedule whereby large gaps between release trains would be a thing of the past.  And in 2011, that promise came true.  With the 2011 summer release of JDK 7, the Java ecosystem now had a version brought up to date.  And then in the fall of 2011, JavaFX 2.0 righted the JavaFX ship making rich internet applications a reality. Similar progress between Oracle and the Java community continues to blossom.  New-found relationship investments between Oracle and Java User Groups are taking root.  Greater participation and content execution by the Java community in JavaOne is steadily increasing.  The road ahead is lit with bright lights and opportunities. And now there's more good news to share.  As of April 2nd, two recognized JavaFX technology luminaries and "rock stars" speakers from the Java community are joining Oracle on a new journey. We're proud to have both Jim Weaver and Stephen Chin joining Oracle's Java Evangelist Team.  You'll start to see them involved in many community facing activities where their JavaFX expertise and passion will shine.  Stay tuned! Welcome @JavaFXpert and @SteveonJava !

    Read the article

  • How to hire support people?

    - by Martin
    I manage a tech support team at a mid-sized software company. We are the last line of support, so issues that we can't fix need to be escalated to the development team. When I joined the company, our team wasn't capable of much beyond using a specific set of troubleshooting steps to solve known issues and escalating anything else to the developers. It's always been a goal of mine for our team to shoulder as much of the support burden as possible without ever bothering a developer. Over the past few years, I, along with several new hires I've made, have made pretty good progress in that direction. We've coded our own troubleshooting tools which now ship with several of our products. When users have never-before-seen issues, we analyze stack traces and troubleshoot down to the code level, and if we need to submit a bug, half the time we've already identified in the code where in the code the bug is and offered a patch to fix it. Here's the problem I've always had: finding support people capable of the work I've described above is really difficult. I've hired 3 people in the past 3 years, and I've probably looked at several thousand resumes and conducted several hundred phone screens to do so. I know it's pretty well accepted that hiring good people is tough in the tech industry, but it seems that support is especially difficult -- there are clearly thousands of people walking around calling themselves support analysts, but 99%+ of them seemingly aren't capable of anything beyond reading a script. I'm curious if anyone has experience recruiting the sort of folks I'm talking about, and if you have any suggestions to share. We've tried all sorts of things -- different job titles/descriptions, using headhunters, etc. And while we've managed to hire a few good folks, it's basically taken us a year to find an appropriate candidate for each opening we've had, and I can't help but wonder if there's something we could be doing differently.

    Read the article

  • Sample Browser Visual Studio Extension is localized and introduced to Japan

    - by Jialiang
    http://blogs.msdn.com/b/codefx/archive/2012/10/14/sample-browser-visual-studio-extension-is-localized-and-introduced-to-japan.aspx  ??????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????From: Japan MVP   "The Sample Browser is very easy to use thanks to the refined interface.  The categorized menu enables faster search. Highly acclaimed.  But it need localization. It may not be a problem for those who can understand English, but I think localizing Sample Browser into Japanese will promote its use in Japan further." This is a prominent feedback collected from the Japan MVP community since we released the last version of Sample Browser, which was only available in English.  Japan developers like the Sample Browser, but they want localized code samples, localized Sample Browser UI, and the localized search experience.  The Japan MVP lead, Satoru Kitabata, observed these needs and expectations.  He started to engage with all local developer MVPs to translate the UI elements in the Sample Browser.  Lots of MVPs signed up to participate in this work.  They had roundtables and newsletters to track the progress.  In short three weeks, every control, every tooltip, every font on every label, was beautifully tuned for Japanese.  The sample search experience was also optimized for Japan developers - they can directly type Japanese query to search for code samples.  Together with Microsoft Japan MVPs, the sample use experience is localized and improved to a new level!    The Japan MVP Lead, Satoru Kitabata, further worked with MSDN Japan site manager and Japan DPE to introduce the good news of localized Sample Browser to Japan Sample Browser  http://msdn.microsoft.com/ja-jp/jj730399 Sample Browser?????? http://msdn.microsoft.com/ja-jp/jj730398     Thanks to the joint effort and Japan MVPs’ feedback and contributions, the Sample Browser gets the chance to benefit the broader Japan developer audience.

    Read the article

  • Bluetooth mouse Logitech M555b not recognized on a Macbook Pro 8.2

    - by Pierre
    I just bought a Logitech M555b Bluetooth mouse today. My computer (a Macbook Pro 8,2) has a bluetooth connection, and it works perfectly fine on Mac OSX (I set up a new device, click the connect button on the mouse, and voilà, done in 5 seconds). I cannot get it to work on Ubuntu 12.04. When I follow the same steps as on Mac OSX under Ubuntu 12.04, Sometimes I will see the mouse name appearing for 1 second on the screen, and if I'm fast enough to click on "Continue", I will have a message telling me the pairing with my mouse failed. Here are the steps I follow: Turn off Bluetooth on Ubuntu Turn Bluetooth on. Bluetooth icon Set up new device... Turn on the mouse, and press the Connect button. Press "Continue" on the Bluetooth New Device Setup screen I see the mouse name for one second, but then it disappear. Click on PIN options... to select '0000'. ... nothing, Ubuntu won't see anything. In the /var/log/syslog, I have the following information: May 27 23:26:16 Trane bluetoothd[896]: HCI dev 0 down May 27 23:26:16 Trane bluetoothd[896]: Adapter /org/bluez/896/hci0 has been disabled May 27 23:26:58 Trane bluetoothd[896]: HCI dev 0 up May 27 23:26:58 Trane bluetoothd[896]: Adapter /org/bluez/896/hci0 has been enabled May 27 23:26:58 Trane bluetoothd[896]: Inquiry Cancel Failed with status 0x12 May 27 23:28:26 Trane bluetoothd[896]: Refusing input device connect: No such file or directory (2) May 27 23:28:26 Trane bluetoothd[896]: Refusing connection from 00:1F:20:24:15:3D: setup in progress May 27 23:28:26 Trane bluetoothd[896]: Discovery session 0x7f3409ab5b70 with :1.84 activated I tried for an hour, I restarted my computer, re-paired the mouse on Mac OSX, etc. Sometimes when I restart the computer, I have a dialog box showing up saying that the mouse M555b wants to access some resources or something, if I click "Grant", or even if I tick "always grant access", nothing happens... How can I get the Bluetooth to work properly? Help!

    Read the article

  • App to make a video from photos?

    - by chtfn
    I was wondering what could be a good app (with a GUI ;) ) for making a video from a bunch of photos or images, to create a time-lapse video, or a stop-motion animation, or even a video like this one. The idea is to set a really small time between each photo, but also to be able to change this time every so often, or add some effects, to make the succession smoother in particular. What would be perfect is a function that allows automatic cropping of the photos as well as exposure adjustment so they all have the same background and so the time-lapse video looks smoother. I know about the slide show app "Imagination" but the interval can not go under one second. Cheers! Edit: here is my progress, also thanks to the first answer: I tried Luciole, it is really simple and promessing, but pretty buggy, and I only could export an average video in .dv format (mpg2 and avi don't work). Apparently, it has difficulties when changing the fps. I also tried StopMotion: also pretty buggy, I had to go into preferences and modify the encoding commands to get a result, but it's the best result I got so far. But none of those has effects to make transitions smoother... I tried several diaporama apps: Imagination doesn't handle more than 1 image per second; PhotoFilmStrip (repo version and latest version from website): same problem even though you can go down to 0.1 second per image, it still behaves wierdly (going back to 1 second automatically); Videoporama: doesn't start at all on 12.04. Any other idea, folks?

    Read the article

  • How Mature is Your Database Change Management Process?

    - by Ben Rees
    .dbd-banner p{ font-size:0.75em; padding:0 0 10px; margin:0 } .dbd-banner p span{ color:#675C6D; } .dbd-banner p:last-child{ padding:0; } @media ALL and (max-width:640px){ .dbd-banner{ background:#f0f0f0; padding:5px; color:#333; margin-top: 5px; } } -- Database Delivery Patterns & Practices Further Reading Organization and team processes How do you get your database schema changes live, on to your production system? As your team of developers and DBAs are working on the changes to the database to support your business-critical applications, how do these updates wend their way through from dev environments, possibly to QA, hopefully through pre-production and eventually to production in a controlled, reliable and repeatable way? In this article, I describe a model we use to try and understand the different stages that customers go through as their database change management processes mature, from the very basic and manual, through to advanced continuous delivery practices. I also provide a simple chart that will help you determine “How mature is our database change management process?” This process of managing changes to the database – which all of us who have worked in application/database development have had to deal with in one form or another – is sometimes known as Database Change Management (even if we’ve never used the term ourselves). And it’s a difficult process, often painfully so. Some developers take the approach of “I’ve no idea how my changes get live – I just write the stored procedures and add columns to the tables. It’s someone else’s problem to get this stuff live. I think we’ve got a DBA somewhere who deals with it – I don’t know, I’ve never met him/her”. I know I used to work that way. I worked that way because I assumed that making the updates to production was a trivial task – how hard can it be? Pause the application for half an hour in the middle of the night, copy over the changes to the app and the database, and switch it back on again? Voila! But somehow it never seemed that easy. And it certainly was never that easy for database changes. Why? Because you can’t just overwrite the old database with the new version. Databases have a state – more specifically 4Tb of critical data built up over the last 12 years of running your business, and if your quick hotfix happened to accidentally delete that 4Tb of data, then you’re “Looking for a new role” pretty quickly after the failed release. There are a lot of other reasons why a managed database change management process is important for organisations, besides job security, not least: Frequency of releases. Many business managers are feeling the pressure to get functionality out to their users sooner, quicker and more reliably. The new book (which I highly recommend) Lean Enterprise by Jez Humble, Barry O’Reilly and Joanne Molesky provides a great discussion on how many enterprises are having to move towards a leaner, more frequent release cycle to maintain their competitive advantage. It’s no longer acceptable to release once per year, leaving your customers waiting all year for changes they desperately need (and expect) Auditing and compliance. SOX, HIPAA and other compliance frameworks have demanded that companies implement proper processes for managing changes to their databases, whether managing schema changes, making sure that the data itself is being looked after correctly or other mechanisms that provide an audit trail of changes. We’ve found, at Red Gate that we have a very wide range of customers using every possible form of database change management imaginable. Everything from “Nothing – I just fix the schema on production from my laptop when things go wrong, and write it down in my notebook” to “A full Continuous Delivery process – any change made by a dev gets checked in and recorded, fully tested (including performance tests) before a (tested) release is made available to our Release Management system, ready for live deployment!”. And everything in between of course. Because of the vast number of customers using so many different approaches we found ourselves struggling to keep on top of what everyone was doing – struggling to identify patterns in customers’ behavior. This is useful for us, because we want to try and fit the products we have to different needs – different products are relevant to different customers and we waste everyone’s time (most notably, our customers’) if we’re suggesting products that aren’t appropriate for them. If someone visited a sports store, looking to embark on a new fitness program, and the store assistant suggested the latest $10,000 multi-gym, complete with multiple weights mechanisms, dumb-bells, pull-up bars and so on, then he’s likely to lose that customer. All he needed was a pair of running shoes! To solve this issue – in an attempt to simplify how we understand our customers and our offerings – we built a model. This is a an attempt at trying to classify our customers in to some sort of model or “Customer Maturity Framework” as we rather grandly term it, which somehow simplifies our understanding of what our customers are doing. The great statistician, George Box (amongst other things, the “Box” in the Box-Jenkins time series model) gave us the famous quote: “Essentially all models are wrong, but some are useful” We’ve taken this quote to heart – we know it’s a gross over-simplification of the real world of how users work with complex legacy and new database developments. Almost nobody precisely fits in to one of our categories. But we hope it’s useful and interesting. There are actually a number of similar models that exist for more general application delivery. We’ve found these from ThoughtWorks/Forrester, from InfoQ and others, and initially we tried just taking these models and replacing the word “application” for “database”. However, we hit a problem. From talking to our customers we know that users are far less further down the road of mature database change management than they are for application development. As a simple example, no application developer, who wants to keep his/her job would develop an application for an organisation without source controlling that code. Sure, he/she might not be using an advanced Gitflow branching methodology but they’ll certainly be making sure their code gets managed in a repo somewhere with all the benefits of history, auditing and so on. But this certainly isn’t the case (yet) for the database – a very large segment of the people we speak to have no source control set up for their databases whatsoever, even at the most basic level (for example, keeping change scripts in a source control system somewhere). By the way, if this is you, Red Gate has a great whitepaper here, on the barriers people face getting a source control process implemented at their organisations. This difference in maturity is the same as you move in to areas such as continuous integration (common amongst app developers, relatively rare for database developers) and automated release management (growing amongst app developers, very rare for the database). So, when we created the model we started from scratch and biased the levels of maturity towards what we actually see amongst our customers. But, what are these stages? And what level are you? The table below describes our definitions for four levels of maturity – Baseline, Beginner, Intermediate and Advanced. As I say, this is a model – you won’t fit any of these categories perfectly, but hopefully one will ring true more than others. We’ve also created a PDF with a flow chart to help you find which of these groups most closely matches your team:  Download the Database Delivery Maturity Framework PDF here   Level D1 – Baseline Work directly on live databases Sometimes work directly in production Generate manual scripts for releases. Sometimes use a product like SQL Compare or similar to do this Any tests that we might have are run manually Level D2 – Beginner Have some ad-hoc DB version control such as manually adding upgrade scripts to a version control system Attempt is made to keep production in sync with development environments There is some documentation and planning of manual deployments Some basic automated DB testing in process Level D3 – Intermediate The database is fully version-controlled with a product like Red Gate SQL Source Control or SSDT Database environments are managed Production environment schema is reproducible from the source control system There are some automated tests Have looked at using migration scripts for difficult database refactoring cases Level D4 – Advanced Using continuous integration for database changes Build, testing and deployment of DB changes carried out through a proper database release process Fully automated tests Production system is monitored for fast feedback to developers   Does this model reflect your team at all? Where are you on this journey? We’d be very interested in knowing how you get on. We’re doing a lot of work at the moment, at Red Gate, trying to help people progress through these stages. For example, if you’re currently not source controlling your database, then this is a natural next step. If you are already source controlling your database, what about the next stage – continuous integration and automated release management? To help understand these issues, there’s a summary of the Red Gate Database Delivery learning program on our site, alongside a Patterns and Practices library here on Simple-Talk and a Training Academy section on our documentation site to help you get up and running with the tools you need to progress. All feedback is welcome and it would be great to hear where you find yourself on this journey! This article is part of our database delivery patterns & practices series on Simple Talk. Find more articles for version control, automated testing, continuous integration & deployment.

    Read the article

  • CodePlex Daily Summary for Saturday, February 26, 2011

    CodePlex Daily Summary for Saturday, February 26, 2011Popular ReleasesDirectQ: Release 1.8.7 Beta 2: Beta 2 release to fix some early reported problems with the original 1.8.7 Beta.Chiave File Encryption: Chiave 0.9.2: Release Notes Application for file encryption and decryption using 512 Bit rijndael encyrption algorithm with simple to use UI. Its written in C# and compiled in .Net version 3.5. It incorporates features of Windows 7 like Jumplists, Taskbar progress and Aero Glass. Now with added support to Windows XP! Change Log from 0.9.1 to 0.9.2: ==================== Added: > Now it displays number of files added in the wizard to the Window Title bar. > Added support to Windows XP. > Minor UI tweaks. I...Claims Based Identity & Access Control Guide: Drop 1 - Claims Identity Guide V2: Highlights of drop #1 This is the first drop of the new "Claims Identity Guide" edition. In this release you will find: All previous samples updated and enhanced. All code upgraded to .NET 4 and Visual Studio 2010. Extensive cleanup. Refactored Simulated Issuers: each solution now gets its own issuers. This results in much cleaner and simpler to understand code. Added Single Sign Out support. Added first sample using ACS ("ACS as a Federation Provider"). This sample extends the ori...HFR7 - Forum Hardware.fr pour Windows Phone 7: HFR7 - v1.1.1: NOUVELLES FONCTIONS : - Aucune. AMÉLIORATIONS : - La page "Catégories" est désormais intégrée au pivot "Bienvenue". - Apparition de boutons de changement de page en bas du sujet en consultation. - Les en-têtes sur les sujets sont désormais de la même couleur que la couleur d'accentuation de votre téléphone. BUGFIXES : - Les catégories s'affichent correctement. - Cliquer sur le bouton "drapeau" alors qu'on est dans la liste des topics d'une page n'amenait pas directement au dernier post non ...Simple Notify: Simple Notify Beta 2011-02-25: Feature: host the service with a single click in console Feature: host the service as a windows service Feature: notification cient application Feature: push client application Feature: push notifications from your powershell script Feature: C# wrapper libraries for your applicationsMono.Addins: Mono.Addins 0.6: The 0.6 release of Mono.Addins includes many improvements, bug fixes and new features: Add-in engine Add-in name and description can now be localized. There are new custom attributes for defining them, and can also be specified as xml elements in an add-in manifest instead of attributes. Support for custom add-in properties. It is now possible to specify arbitrary properties in add-ins, which can be queried at install time (using the Mono.Addins.Setup API) or at run-time. Custom extensio...patterns & practices: Project Silk: Project Silk Community Drop 3 - 25 Feb 2011: IntroductionWelcome to the third community drop of Project Silk. For this drop we are requesting feedback on overall application architecture, code review of the JavaScript Conductor and Widgets, and general direction of the application. Project Silk provides guidance and sample implementations that describe and illustrate recommended practices for building modern web applications using technologies such as HTML5, jQuery, CSS3 and Internet Explorer 9. This guidance is intended for experien...PhoneyTools: Initial Release (0.1): This is the 0.1 version for preview of the features.Minemapper: Minemapper v0.1.5: Now supports new Minecraft beta v1.3 map format, thanks to updated mcmap. Disabled biomes, until Minecraft Biome Extractor supports new format.Smartkernel: Smartkernel: ????,??????Coding4Fun Tools: Coding4Fun.Phone.Toolkit v1.2: New control, Toast Prompt! Removed progress bar since Silverlight Toolkit Feb 2010 has it.Umbraco CMS: Umbraco 4.7: Service release fixing 31 issues. A full changelog will be available with the final stable release of 4.7 Important when upgradingUpgrade as if it was a patch release (update /bin, /umbraco and /umbraco_client). For general upgrade information follow the guide found at http://our.umbraco.org/wiki/install-and-setup/upgrading-an-umbraco-installation 4.7 requires the .NET 4.0 framework Web.Config changes Update the web web.config to include the 4 changes found in (they're clearly marked in...HubbleDotNet - Open source full-text search engine: V1.1.0.0: Add Sqlite3 DBAdapter Add App Report when Query Cache is Collecting. Improve the performance of index through Synchronize. Add top 0 feature so that we can only get count of the result. Improve the score calculating algorithm of match. Let the score of the record that match all items large then others. Add MySql DBAdapter Improve performance for multi-fields sort . Using hash table to access the Payload data. The version before used bin search. Using heap sort instead of qui...Silverlight????[???]: silverlight????[???]2.0: ???????,?????,????????silverlight??????。DBSourceTools: DBSourceTools_1.3.0.0: Release 1.3.0.0 Changed editors from FireEdit to ICSharpCode.TextEditor. Complete re-vamp of Intellisense ( further testing needed). Hightlight Field and Table Names in sql scripts. Added field dropdown on all tables and views in DBExplorer. Added data option for viewing data in Tables. Fixed comment / uncomment bug as reported by tareq. Included Synonyms in scripting engine ( nickt_ch ).IronPython: 2.7 Release Candidate 1: We are pleased to announce the first Release Candidate for IronPython 2.7. This release contains over two dozen bugs fixed in preparation for 2.7 Final. See the release notes for 60193 for details and what has already been fixed in the earlier 2.7 prereleases. - IronPython TeamCaliburn Micro: A Micro-Framework for WPF, Silverlight and WP7: Caliburn.Micro 1.0 RC: This is the official Release Candicate for Caliburn.Micro 1.0. The download contains the binaries, samples and VS templates. VS Templates The templates included are designed for situations where the Caliburn.Micro source needs to be embedded within a single project solution. This was targeted at government and other organizations that expressed specific requirements around using an open source project like this. NuGet This release does not have a corresponding NuGet package. The NuGet pack...Caliburn: A Client Framework for WPF and Silverlight: Caliburn 2.0 RC: This is the official Release Candidate for Caliburn 2.0. It contains all binaries, samples and generated code docs.Rawr: Rawr 4.0.20 Beta: Rawr is now web-based. The link to use Rawr4 is: http://elitistjerks.com/rawr.phpThis is the Cataclysm Beta Release. More details can be found at the following link http://rawr.codeplex.com/Thread/View.aspx?ThreadId=237262 As of the 4.0.16 release, you can now also begin using the new Downloadable WPF version of Rawr!This is a pre-alpha release of the WPF version, there are likely to be a lot of issues. If you have a problem, please follow the Posting Guidelines and put it into the Issue Trac...Windows Phone 7 Isolated Storage Explorer: WP7 Isolated Storage Explorer v1.0 Beta: Current release features:WPF desktop explorer client Visual Studio integrated tool window explorer client (Visual Studio 2010 Professional and above) Supported operations: Refresh (isolated storage information), Add Folder, Add Existing Item, Download File, Delete Folder, Delete File Explorer supports operations running on multiple remote applications at the same time Explorer detects application disconnect (1-2 second delay) Explorer confirms operation completed status Explorer d...New Projectsconvert digit to word upto thousand: convert digit to word upto thousandCustom XSLT with recursive loop in Biztalk 2009: Custom XSLT with recursive loop in Biztalk 2009ECO contrib: ECO ist a excellent framework for domain driven design developed by CapableObjects AB. Share your additional features in this contrib project.euler21: euler 21euler22: euler 22 problemflowless: Some workflow thingHFR7 - Forum Hardware.fr pour Windows Phone 7: HFR7 vous permet de surfer sur le forum de Hardware.fr via votre Windows Phone. Il est développé sous Silverlight (C#/XAML).ISP.NET: ISP.NET is a code level verification tool for MPI programs. It includes a Visual Studio 2010 extension that allows for push button verification of user programs that are written in C, C++ and C#. ISP checks for deadlocks, assertion violations, and other MPI program issues. IVY Frameworks: Ivy Frameworks is an architectural framework to create multi-tire application in a consistent way. We are creating specific application blocks. When completed it will help to create a software development pattern, to mass produce .Net applications in a software factory model. Jobeet: Just another Symfony Tutorial I'm following.Lurity: Project Codename "Lurity".Metro Toolkit: Metro ToolkitMySchoolManager: MySchoolManager es un programa de fines didácticos, de código fuente abierto y documentado en español, que simula un sistema de administración del personal de una escuela. NewRapp: Project at KTH in course DD2388NHibernateCMS: NHibernateCMSParametero - Yet Another Console Arguments Parsing Library: Parametero - Yet Another Console Arguments Parsing LibraryRasifiel's test: Test projectSilverlight Gantt Chart: Don't waste time creating your own Gantt Chart. We've already done it!SKWebSite: This is my first ASP.NET MVC3 projectTechChat: TechChat is a ASP.net AJAX based stylish chat room. It demonstrates the use of database and use of AJAX. It is developed in VB.netUDK Development Kit Addons: UDK Development Kit Addons makes it easier for UDK users to develop and debug UDK scripts. It's developed in C# with using Visual Studio Shell.UltraLight.mvvm Windows Phone 7 MVVM Framework: A lightweight (< 300 lines, < 25KB) framework for developing MVVM Silverlight applications with support for tombstoning on the Windows Phone 7.Website Panel: Website PanelxMS (eXtensible Management System): The xMS is a simple console that can be extended using plugins. Those plugins can be written by developers using a simple interface. It's a good starting for who want to develop a plugin based application.Xna Midi Project: A project that will allow midi functionality using only the compact framework for windows and Xbox solutions.

    Read the article

  • How Service Component Architecture (SCA) Can Be Incorporated Into Existing Enterprise Systems

    After viewing Rob High’s presentation “The SOA Component Model” hosted on InfoQ.com, I can foresee how Service Component Architecture (SCA) can be incorporated in to an existing enterprise. According to IBM’s DeveloperWorks website, SCA is a set of conditions which outline a model for constructing applications/systems using a Service-Oriented Architecture (SOA). In addition, SCA builds on open standards such as Web services. In the future, I can easily see how some large IT shops could potently divide development teams or work groups up into Component/Data Object Groups, and Standard Development Groups. The Component/Data Object Group would only work on creating and maintaining components that are reused throughout the entire enterprise. The Standard Development Group would work on new and existing projects that incorporate the use of various components to accomplish various business tasks. In my opinion the incorporation of SCA in to any IT department will initially slow down the number of new features developed due to the time needed to create the new and loosely-coupled components. However once a company becomes more mature in its SCA process then the number of program features developed will greatly increase. I feel this is due to the fact that the loosely-coupled components needed in order to add the new features will already be built and ready to incorporate into any new development feature request. References: BEA Systems, Cape Clear Software, IBM, Interface21, IONA Technologies PLC, Oracle, Primeton Technologies Ltd, Progress Software, Red Hat Inc., Rogue Wave Software, SAP AG, Siebel Systems, Software AG, Sun Microsystems, Sybase, TIBCO Software Inc. (2006). Service Component Architecture. Retrieved 11 27, 2011, from DeveloperWorks: http://www.ibm.com/developerworks/library/specification/ws-sca/ High, R. (2007). The SOA Component Model. Retrieved 11 26, 2011, from InfoQ: http://www.infoq.com/presentations/rob-high-sca-sdo-soa-programming-model

    Read the article

  • Updating an interface to bootstrap

    - by Anagio
    I'm updating a web apps interface to bootstrap. There's a lot of existing CSS and Javascript/jQuery i'll have to migrate, most i'll scrap and use bootstraps. But for parts of the app that use datatables and such all that code has to be migrated. I'm working on a development server. The app has a header.phtml sidebar.phtml and a lot of content area view files. Right now i'm building static versions of view files say the header. I then open my existing header.phtml into notepad++ split screen with the static file and copy over the dynamic code. Then replace the old header.phtml with the one I just made. To make sure the header displayed correctly I had to add all the CSS and JS from bootstrap. This is conflicting with the current CSS styles and some JS conflicts as well. Should I go through the app note what JS I absolutely need what I don't and same with the CSS. Then strip all the CSS/JS from the old app that is not needed so it only has bootstraps and any other critical files and not worry about the way pages look as i'm making progress to updating them. I'd be working on mostly a wireframe of the old site without any styles until I get to applying bootstraps. Is this efficient or is there another way I can get through all these files and update them easily?

    Read the article

  • Skanska Builds Global Workforce Insight with Cloud-Based HCM System

    - by HCM-Oracle
    By David Baum - Originally posted on Profit Peter Bjork grew up building things. He started his work life learning all sorts of trades at his father’s construction company in the northern part of Sweden. So in college, it was natural for him to pursue a bachelor’s degree in construction engineering—but he broke new ground when he added a master’s degree in finance to his curriculum vitae. Written on a traditional résumé, Bjork’s current title (vice president of information systems strategies) doesn’t reveal the diversity of his experience—that he’s adept with hammer and nails as well as rows and columns. But a big part of his current job is to work with his counterparts in human resources (HR) designing, building, and deploying the systems needed to get a complete view of the skills and potential of Skanska’s 22,000-strong white-collar workforce. And Bjork believes that complete view is essential to Skanska’s success. “Our business is really all about people,” says Bjork, who has worked with Skanska for 16 years. “You can have equipment and financial resources, but to truly succeed in a business like ours you need to have the right people in the right places. That’s what this system is helping us accomplish.” In a global HR environment that suffers from a paradox of high unemployment and a scarcity of skilled labor, managers need to have a complete understanding of workforce capabilities to develop management skills, recruit for open positions, ensure that staff is getting the training they need, and reduce attrition. Skanska’s human capital management (HCM) systems, based on Oracle Talent Management Cloud, play a critical role delivering that understanding. “Skanska’s philosophy of having great people, encouraging their development, and giving them the chance to move across business units has nurtured a culture of collaboration, but managing a diverse workforce spread across the globe is a monumental challenge,” says Annika Lindholm, global human resources system owner in the HR department at Skanska’s headquarters just outside of Stockholm, Sweden. “We depend heavily on Oracle’s cloud technology to support our HCM function.” Construction, Workers For Skanska’s more than 60,000 employees and contractors, managing huge construction projects is an everyday job. Beyond erecting signature buildings, management’s goal is to build a corporate culture where valuable talent can be sought out and developed, bringing in the right mix of people to support and grow the business. “Of all the companies in our space, Skanska is probably one of the strongest ones, with a laser focus on people and people development,” notes Tom Crane, chief HR and communications officer for Skanska in the United States. “Our business looks like equipment and material, but all we really have at the end of the day are people and their intellectual capital. Without them, second only to clients, of course, you really can’t achieve great things in the high-profile environment in which we work.” During the 1990s, Skanska entered an expansive growth phase. A string of successful acquisitions paved the way for the company’s transformation into a global enterprise. “Today the company’s focus is on profitable growth,” continues Crane. “But you can’t really achieve growth unless you are doing a very good job of developing your people and having the right people in the right places and driving a culture of growth.” In the United States alone, Skanska has more than 8,000 employees in four distinct business units: Skanska USA Building, also known as the Construction Manager, builds everything at ground level and above—hospitals, educational facilities, stadiums, airport terminals, and other massive projects. Skanska USA Civil does everything at ground level and below, such as light rail, water treatment facilities, power plants or power industry facilities, highways, and bridges. Skanska Infrastructure Development develops public-private partnerships—projects in which Skanska adds equity and also arranges for outside financing. Skanska Commercial Development acts like a commercial real estate developer, acquiring land and building offices on spec or build-to-suit for its clients. Skanska's international portfolio includes construction of the new Meadowlands Stadium. Getting the various units to operate collaboratatively helps Skanska deliver high value to clients and shareholders. “When we have this collaboration among units, it allows us to enrich each of the business units and, at the same time, develop our future leaders to be more facile in operating across business units—more accepting of a ‘one Skanska’ approach,” explains Crane. Workforce Worldwide But HR needs processes and tools to support managers who face such business dynamics. Oracle Talent Management Cloud is helping Skanska implement world-class recruiting strategies and generate the insights needed to drive quality hiring practices, internal mobility, and a proactive approach to building talent pipelines. With their new cloud system in place, Skanska HR leaders can manage everything from recruiting, compensation, and goal and performance management to employee learning and talent review—all as part of a single, cohesive software-as-a-service (SaaS) environment. Skanska has successfully implemented two modules from Oracle Talent Management Cloud—the recruiting and performance management modules—and is in the process of implementing the learn module. Internally, they call the systems Skanska Recruit, Skanska Talent, and Skanska Learn. The timing is apropos. With high rates of unemployment in recent years, there have been many job candidates on the market. However, talent scarcity continues to frustrate recruiters. Oracle Taleo Recruiting Cloud Service, one of the applications in the Oracle Talent Management cloud portfolio, enables Skanska managers to create more-intelligent recruiting strategies, pulling high-performer profile statistics to create new candidate profiles and using multitiered screening and assessments to ensure that only the best-suited candidate applications make it to the recruiter’s desk. Tools such as applicant tracking, interview management, and requisition management help recruiters and hiring managers streamline the hiring process. Oracle’s cloud-based software system automates and streamlines many other HR processes for Skanska’s multinational organization and delivers insight into the success of recruiting and talent-management efforts. “The Oracle system is definitely helping us to construct global HR processes,” adds Bjork. “It is really important that we have a business model that is decentralized, so we can effectively serve our local markets, and interact with our global ERP [enterprise resource planning] systems as well. We would not be able to do this without a really good, well-integrated HCM system that could support these efforts.” A key piece of this effort is something Skanska has developed internally called the Skanska Leadership Profile. Core competencies, on which all employees are measured, are used in performance reviews to determine weak areas but also to discover talent, such as those who will be promoted or need succession plans. This global profiling system brings consistency to the way HR professionals evaluate and review talent across the company, with a consistent set of ratings and a consistent definition of competencies. All salaried employees in Skanska are tied to a talent management process that gives opportunity for midyear and year-end reviews. Using the performance management module, managers can align individual goals with corporate goals; provide clear visibility into how each employee contributes to the success of the organization; and drive a strategic, end-to-end talent management strategy with a single, integrated system for all talent-related activities. This is critical to a company that is highly focused on ensuring that every employee has a development plan linked to his or her succession potential. “Our approach all along has been to deploy software applications that are seamless to end users,” says Crane. “The beauty of a cloud-based system is that much of the functionality takes place behind the scenes so we can focus on making sure users can access the data when they need it. This model greatly improves their efficiency.” The employee profile not only sets a competency baseline for new employees but is also integrated with Skanska’s other back-office Oracle systems to ensure consistency in the way information is used to support other business functions. “Since we have about a dozen different HR systems that are providing us with information, we built a master database that collects all the information,” explains Lindholm. “That data is sent not only to Oracle Talent Management Cloud, but also to other systems that are dependent on this information.” Collaboration to Scale Skanska is poised to launch a new Oracle module to link employee learning plans to the review process and recruitment assessments. According to Crane, connecting these processes allows Skanska managers to see employees’ progress and produce an updated learning program. For example, as employees take classes, supervisors can consult the Oracle Talent Management Cloud portal to monitor progress and align it to each individual’s training and development plan. “That’s a pretty compelling solution for an organization that wants to manage its talent on a real-time basis and see how the training is working,” Crane says. Rolling out Oracle Talent Management Cloud was a joint effort among HR, IT, and a global group that oversaw the worldwide implementation. Skanska deployed the solution quickly across all markets at once. In the United States, for example, more than 35 offices quickly got up to speed on the new system via webinars for employees and face-to-face training for the HR group. “With any migration, there are moments when you hold your breath, but in this case, we had very few problems getting the system up and running,” says Crane. Lindholm adds, “There has been very little resistance to the system as users recognize its potential. Customizations are easy, and a lasting partnership has developed between Skanska and Oracle when help is needed. They listen to us.” Bjork elaborates on the implementation process from an IT perspective. “Deploying a SaaS system removes a lot of the complexity,” he says. “You can downsize the IT part and focus on the business part, which increases the probability of a successful implementation. If you want to scale the system, you make a quick phone call. That’s all it took recently when we added 4,000 users. We didn’t have to think about resizing the servers or hiring more IT people. Oracle does that for us, and they have provided very good support.” As a result, Skanska has been able to implement a single, cost-effective talent management solution across the organization to support its strategy to recruit and develop a world-class staff. Stakeholders are confident that they are providing the most efficient recruitment system possible for competent personnel at all levels within the company—from skilled workers at construction sites to top management at headquarters. And Skanska can retain skilled employees and ensure that they receive the development opportunities they need to grow and advance.

    Read the article

  • CodePlex Daily Summary for Monday, June 09, 2014

    CodePlex Daily Summary for Monday, June 09, 2014Popular ReleasesSmarterSql: Release 2014-06-09: Added a new strip connected to a text window that can be configured to show a color per connection (per server and database).SCCM 2012 Application Importer: SCCM 2012 Application Importer Alpha 0.3: Fixes since 0.2: Added GUI browser for choosing Limiting Collection Fix bug related to Deployments Bug when getting DP groups in settings tool Fixed bug with deployment and client did not download content. NOTE: Now application is required to run elevated Previous version must first be uninstalled and everything must be reconfigured since there have been changes in the config.xml.Papercut: Papercut v3.0.0.0 beta: Papercut has switched to semantic versioning! That means you will have to uninstall old "clickonce" versions to get the latest as it will see it as an older version. Latest Has Tons of New Features: Modern UI MVVM Architecture Watch Directories for New Messages Optional Backend Papercut Service Load on Windows Startup Attachments/Mime SectionsDIII Save Editor: DIII.SaveEdit_Alpha1.1.10.91.zip: Everything should work report what dontExperfwiz (Exchange Performance Data Collection tool): Experfwiz 1.3.8: List of updates in 1.3.8 Added support for Windows 2012 & 2012 R2 (for future use) Added support for Exchange 2013 Full is now enabled by default. To disable full mode, use 'nofull'. Exchange 2013 requires full. Added "\Processor Information()\" counters to Exchange 2010 full Blocked Exmon execution on Exchange 2013BugNET Issue Tracker: BugNET 1.6: Version 1.6 is a major upgrade to the latest frameworks and components by Microsoft. It includes a major UI overhaul using the bootstrap framework to have a modern, mobile friendly and easily customized layout. Upgrade to .NET 4.5 ASP.NET social auth Add script bundling and optimization Improvements for mobile devices Bootstrap (UI overhaul) Rewritten / friendly URL's Please read our release notes for BugNET 1.6: http://blog.bugnetproject.com/2014/06/08/bugnet-1-6-and-bugnet-pro-1...SFDL.NET: SFDL.NET (2.2.9.3): Changelog: Retry Bugfix (Error Counter wurde nicht korrekt zurückgesetzt) Neue Einstellung: Retry Wartezeit ist nun EinstellbarAspose for Apache POI: Aspose.Words vs Apache POI WP - v 1.1: Release contain the Code Comparison for Features in Apache POI WP SDK and Aspose.Words What's New ?Following Examples: Working with Headers Working with Footers Access Ranges in Document Delete Ranges in Document Insert Before and After Ranges Feedback and Suggestions Many more examples are yet to come here. Keep visiting us. Raise your queries and suggest more examples via Aspose Forums or via this social coding site.babelua: 1.5.7.0: V1.5.7.0 - 2014.6.6Stability improvement: use "lua scripts folder" as lua search path when debugging;SEToolbox: SEToolbox 01.033.007 Release 1: Fixed breaking changes in Space Engineers in latest update. Installation of this version will replace older version.PlaySly: GetDirectLink 1.0.1.0: ConfiguraciónNuevo sistema de configuración Nuevo formulario de configuración Añadidas configuraciones visuales Fuente principal, fuente secundaria, fuente menus, fuente botones grandes, fuente botones pequeños Color fondo, color fondo menus, color fondo botones y colores de fuentes Ahora las fuentes soportan estilo (irregular, negrita, tachado y subrayado) Añadidas configuraciones de reproductor Pausar al iniciar para que el vídeo cargue (buffering) Añadidas configuraciones sobre...Virto Commerce Enterprise Open Source eCommerce Platform (asp.net mvc): Virto Commerce 1.10: Virto Commerce Community Edition version 1.10. To install the SDK package, please refer to SDK getting started documentation To configure source code package, please refer to Source code getting started documentation This release includes bug fixes and improvements (including Commerce Manager localization and https support). More details about this release can be found on our blog at http://blog.virtocommerce.com.NPOI: NPOI 2.1: Assembly Version: 2.1.0 New Features a. XSSFSheet.CopySheet b. Excel2Html for XSSF c. insert picture in word 2007 d. Implement IfError function in formula engine Bug Fixes a. fix conditional formatting issue b. fix ctFont order issue c. fix vertical alignment issue in XSSF d. add IndexedColors to NPOI.SS.UserModel e. fix decimal point issue in non-English culture f. fix SetMargin issue in XSSF g.fix multiple images insert issue in XSSF h.fix rich text style missing issue in XSSF i. fix cell...51Degrees - Device Detection and Redirection: 3.1.2.3: Version 3.1 HighlightsDevice detection algorithm is over 100 times faster. Regular expressions and levenshtein distance calculations are no longer used. The device detection algorithm performance is no longer limited by the number of device combinations contained in the dataset. Two modes of operation are available: Memory – the detection data set is loaded into memory and there is no continuous connection to the source data file. Slower initialisation time but faster detection performanc...CS-Script for Notepad++ (C# intellisense and code execution): Release v1.0.27.0: CodeMap now indicates the type name for all members Implemented running scripts 'as administrator'. Just add '//css_npp asadmin' to the script and run it as usual. 'Prepare script for distribution' now aggregates script dependency assemblies. Various improvements in CodeSnipptet, Autcompletion and MethodInfo interactions with each other. Added printing line number for the entries in CodeMap (subject of configuration value) Improved debugging step indication for classless scripts ...ClosedXML - The easy way to OpenXML: ClosedXML 0.72.3: 70426e13c415 ClosedXML for .Net 4.0 now uses Open XML SDK 2.5 b9ef53a6654f Merge branch 'master' of https://git01.codeplex.com/forks/vbjay/closedxml 727714e86416 Fix range.Merge(Boolean) for .Net 3.5 eb1ed478e50e Make public range.Merge(Boolean checkIntersects) 6284cf3c3991 More performance improvements when saving.TEncoder: 4.0.0: --4.0.0 -Added: Video downloader -Added: Total progress will be updated more smoothly -Added: MP4Box progress will be shown -Added: A tool to create gif image from video -Added: An option to disable trimming -Added: Audio track option won't be used for mpeg sources as default -Fixed: Subtitle position wasn't used -Fixed: Duration info in the file list wasn't updated after trimming -Updated: FFMpegVeraCrypt: VeraCrypt version 1.0d: Changes between 1.0c and 1.0d (03 June 2014) : Correct issue while creating hidden operating system. Minor fixes (look at git history for more details).Aspose for DNN: DNN Import from PDF using Aspose.Pdf: Aspose DNN PDF Import Module allows developers to get/read contents of PDF document without requiring any other software such as Adobe Acrobat or PDF reader. This module demonstrates the powerful import feature provided by Aspose.Pdf. It adds a simple file browser control and Import from PDF button on the page where the module is added. When clicking the button, users get the document contents displayed on screen immediately.Windows ??? ???????????? ??????: ??? ??? ?????? 1.1: C#/XAML  ?????????、??? ???????????????。???????、CSV????????????????????????????????。 ???????????、?????????????????。New ProjectsAmericanMarket: american marketCatering: CateringeeCommerce: blog with ecommerceGFramework: ????,????!littleAdminHelper: Little Admin Helper is a Software to gather Systeminformations for Helpdesk Calls. The Application is able to send Mails to a specified Support adress.mkv2mp4: converter for mkv2mp4My Explorer: This is a modern version of the desktop's File Explorer.NAAE v2 companion code: This project contains the companion code for the "Microsoft .NET - Architecting Applications for the Enterprise (2nd Edition)" book.OpenSSDT: OpenSSDT is open source project that collect set of tools and documentation that where created from expirance with SSDT and the DacFX framework. Feel free to adOperations Documentation Templates: A set of document templates to be used by operations groups to have a rapid and formalized process for solution delivery. Redback: A simple web spider written in C# and exclusively targeting Windows RT/Windows Phone platforms.SQL Library: Collection of t-sql queries.systempro: systempro?????-?????【??】: ?????????????????????????,???????????,??????,??????????????...????????。??????! ?????-?????【??】: ?????????:?????,??????!???????????????,???????、?????、??????“??”????,????,????! ??????-??????【??】: ?????????????????,??????????、??????,??????????、????、????、???????。??????-??????【??】: ?????????????????,??????????、??????,??????????、????、????、???????。?????-?????【??】: ????????????????、?????????,??????、??????????????????,???????.??????????,????????。

    Read the article

  • How to drastically improve code coverage?

    - by Peter Kofler
    I'm tasked with getting a legacy application under unit test. First some background about the application: It's a 600k LOC Java RCP code base with these major problems massive code duplication no encapsulation, most private data is accessible from outside, some of the business data also made singletons so it's not just changeable from outside but also from everywhere. no business model, business data is stored in Object[] and double[][], so no OO. There is a good regression test suite and an efficient QA team is testing and finding bugs. I know the techniques how to get it under test from classic books, e.g. Michael Feathers, but that's too slow. As there is a working regression test system I'm not afraid to aggressively refactor the system to allow unit tests to be written. How should I start to attack the problem to get some coverage quickly, so I'm able to show progress to management (and in fact to start earning from safety net of JUnit tests)? I do not want to employ tools to generate regression test suites, e.g. AgitarOne, because these tests do not test if something is correct.

    Read the article

  • Ch-ch-ch-changes...

    - by Lou Vega
    The last few months have been pretty crazy. Just before the MVP summit in February I was approached about changing to a different project with my (then current) employer, and right after the summit I was approached by another company. Eventually I went with the new company and a new role in the Information Assurance field. More to come on that as things progress. All that being said I've not been as active in the .NET community as I once was and I miss it - so I'm looking to dive back in especially as Windows Phone 7 draws nearer and nearer. Speaking of the community - many of you may not recognize me if you see me now :) I had told my son for the last couple years that I would cut my hair before he turned 5 (he always asked how come he didn't have long hair) and he turns 5 (time has flown!) on June 19th so May 30th I cut my long hair down pretty short and donated the hair to Locks of Love. As Chris said to me on Twitter, "pics or it didn't happen" - well fortunately my wife was there to document the whole thing so I'll get a picture or two posted here soon.

    Read the article

  • CodePlex Daily Summary for Saturday, June 07, 2014

    CodePlex Daily Summary for Saturday, June 07, 2014Popular ReleasesSFDL.NET: SFDL.NET (2.2.9.3): Changelog: Retry Bugfix (Error Counter wurde nicht korrekt zurückgesetzt) Neue Einstellung: Retry Wartezeit ist nun EinstellbarLoad Runner - HTTP Pressure Test Tool: Load Runner 1.2: 1. added support for distributed load test (read documentation for details) 2. added detail documentationAspose for Apache POI: Aspose.Words vs Apache POI WP - v 1.1: Release contain the Code Comparison for Features in Apache POI WP SDK and Aspose.Words What's New ?Following Examples: Working with Headers Working with Footers Access Ranges in Document Delete Ranges in Document Insert Before and After Ranges Feedback and Suggestions Many more examples are yet to come here. Keep visiting us. Raise your queries and suggest more examples via Aspose Forums or via this social coding site.babelua: 1.5.7.0: V1.5.7.0 - 2014.6.6Stability improvement: use "lua scripts folder" as lua search path when debugging;SEToolbox: SEToolbox 01.033.007 Release 1: Fixed breaking changes in Space Engineers in latest update. Installation of this version will replace older version.Virto Commerce Enterprise Open Source eCommerce Platform (asp.net mvc): Virto Commerce 1.10: Virto Commerce Community Edition version 1.10. To install the SDK package, please refer to SDK getting started documentation To configure source code package, please refer to Source code getting started documentation This release includes bug fixes and improvements (including Commerce Manager localization and https support). More details about this release can be found on our blog at http://blog.virtocommerce.com.NPOI: NPOI 2.1: Assembly Version: 2.1.0 New Features a. XSSFSheet.CopySheet b. Excel2Html for XSSF c. insert picture in word 2007 d. Implement IfError function in formula engine Bug Fixes a. fix conditional formatting issue b. fix ctFont order issue c. fix vertical alignment issue in XSSF d. add IndexedColors to NPOI.SS.UserModel e. fix decimal point issue in non-English culture f. fix SetMargin issue in XSSF g.fix multiple images insert issue in XSSF h.fix rich text style missing issue in XSSF i. fix cell...51Degrees - Device Detection and Redirection: 3.1.2.3: Version 3.1 HighlightsDevice detection algorithm is over 100 times faster. Regular expressions and levenshtein distance calculations are no longer used. The device detection algorithm performance is no longer limited by the number of device combinations contained in the dataset. Two modes of operation are available: Memory – the detection data set is loaded into memory and there is no continuous connection to the source data file. Slower initialisation time but faster detection performanc...CS-Script for Notepad++ (C# intellisense and code execution): Release v1.0.27.0: CodeMap now indicates the type name for all members Implemented running scripts 'as administrator'. Just add '//css_npp asadmin' to the script and run it as usual. 'Prepare script for distribution' now aggregates script dependency assemblies. Various improvements in CodeSnipptet, Autcompletion and MethodInfo interactions with each other. Added printing line number for the entries in CodeMap (subject of configuration value) Improved debugging step indication for classless scripts ...Kartris E-commerce: Kartris v2.6003: Bug fixes: Fixed issue where category could not be saved if parent categories not altered Updated split string function to 500 chars otherwise problems with attribute filtering in PowerPack Improvements: If a user has group pricing below that available through qty discounts, that will show in place of the qty discountClosedXML - The easy way to OpenXML: ClosedXML 0.72.3: 70426e13c415 ClosedXML for .Net 4.0 now uses Open XML SDK 2.5 b9ef53a6654f Merge branch 'master' of https://git01.codeplex.com/forks/vbjay/closedxml 727714e86416 Fix range.Merge(Boolean) for .Net 3.5 eb1ed478e50e Make public range.Merge(Boolean checkIntersects) 6284cf3c3991 More performance improvements when saving.DNN Blog: 06.00.07: Highlights: Enhancement: Option to show management panel on child modules Fix: Changed SPROC and code to ensure the right people are notified of pending comments. (CP-24018) Fix: Fix to have notification actions authentication assume the right module id so these will work from the messaging center (CP-24019) Fix: Fix to issue in categories in a post that will not save when no categories and no tags selectedcsv2xlsx: Source code: Source code of applicationFamily Tree Analyzer: Version 4.0.0.0-beta5: This major release introduces a significant new feature the ability to search the UK Ordnance Survey 50k Gazetteer for small placenames that often don't appear on a modern Google Map. This means significant numbers of locations that were previously not found by Google Geocoding will now be found by using OS Geocoding. In addition I've added support for loading the Scottish 1930 Parish boundary maps, whilst slightly different from the parish boundaries in use in the 1800s that are familiar to...TEncoder: 4.0.0: --4.0.0 -Added: Video downloader -Added: Total progress will be updated more smoothly -Added: MP4Box progress will be shown -Added: A tool to create gif image from video -Added: An option to disable trimming -Added: Audio track option won't be used for mpeg sources as default -Fixed: Subtitle position wasn't used -Fixed: Duration info in the file list wasn't updated after trimming -Updated: FFMpegVeraCrypt: VeraCrypt version 1.0d: Changes between 1.0c and 1.0d (03 June 2014) : Correct issue while creating hidden operating system. Minor fixes (look at git history for more details).Microsoft Web Protection Library: AntiXss Library 4.3.0: Download from nuget or the Microsoft Download Center This issue finally addresses the over zealous behaviour of the HTML Sanitizer which should now function as expected once again. HTML encoding has been changed to safelist a few more characters for webforms compatibility. This will be the last version of AntiXSS that contains a sanitizer. Any new releases will be encoding libraries only. We recommend you explore other sanitizer options, for example AntiSamy https://www.owasp.org/index....ConEmu - Windows console with tabs: ConEmu 140602 [Alpha]: ConEmu - developer build x86 and x64 versions. Written in C++, no additional packages required. Run "ConEmu.exe" or "ConEmu64.exe". Some useful information you may found: http://superuser.com/questions/tagged/conemu http://code.google.com/p/conemu-maximus5/wiki/ConEmuFAQ http://code.google.com/p/conemu-maximus5/wiki/TableOfContents If you want to use ConEmu in portable mode, just create empty "ConEmu.xml" file near to "ConEmu.exe" Tweetinvi a friendly Twitter C# API: Tweetinvi 0.9.3.x: Timelines- Added all the parameters available from the Timeline Endpoints in Tweetinvi. - This is available for HomeTimeline, UserTimeline, MentionsTimeline // Simple query var tweets = Timeline.GetHomeTimeline(); // Create a parameter for queries with specific parameters var timelineParameter = Timeline.CreateHomeTimelineRequestParameter(); timelineParameter.ExcludeReplies = true; timelineParameter.TrimUser = true; var tweets = Timeline.GetHomeTimeline(timelineParameter); Tweetinvi 0.9.3.1...Sandcastle Help File Builder: Help File Builder and Tools v2014.5.31.0: General InformationIMPORTANT: On some systems, the content of the ZIP file is blocked and the installer may fail to run. Before extracting it, right click on the ZIP file, select Properties, and click on the Unblock button if it is present in the lower right corner of the General tab in the properties dialog. This release completes removal of the branding transformations and implements the new VS2013 presentation style that utilizes the new lightweight website format. Several breaking cha...New Projects.NET Extended Framework: .NET Extended FrameworkActivity Diagram: This is an attempt to parse C# Operation source and convert them into UML Activity Diagrams. The development of a suitable diagram editor is the next priorityBango Payment Flow in-app payments: Bango Payment Flow in-app paymentsDeckEditor: ?????????????????????????????????。 ?????????、CSV????、???????????。demodjango: just a demo project to record how to using djangoExport Bugs: This application will export all the bugs in a current project from TFS. It also has the option to export all attachments in the current projectFantom - Expression Based Dynamic Language Manager: Easy Dynamic Language (over MSSQL) Management for Asp.Net Web Forms. Very easy create dynamic multi language Asp.Net web site.JIRAShell: Provides PowerShell cmdlets for working with JIRA.PipeUtil: PipeUtil is a library that simplifies use the feature PIPE windows. Has the capability of client and server with threads support.Post Deployment Smoke Tester: This tool enables you to easily carry out post deployment smoke tests against your installed deployments to determine if your environment is in a good state.Quan Ly Dang Ki Internet: quan ly dang ki internetToolKD: ToolKD console application designed to change the binary code for directories that are used KitchenDraw program. Wiki Parsing Service: A web service to Parse wiki mark-up to HTML and vice versaXBee-API for .NET: This is .NET library for communication with XBee/XBee-Pro series 1 (IEEE 802.15.4) and series 2 (ZB/ZigBee Pro) OEM RF Modules. XPinterest: XPinterestZSoft-CMS: the project is going to use a new approach other than regular modular cms es.

    Read the article

  • Preventing possible burnout in a junior dev, or perhaps I'm not doing enough?

    - by m.edmondson
    I'm a software developer with 5 years experience over 3 companies. Within the last year a junior (brand new to the industry) has started at my current employer. I believe he is an excellent developer, who always delivers and is skilled as solving complex problems. However I'm slightly concerned that he is possibly applying himself too much for the following reasons: He begins work approximately 2 hours before most (and is expected) In his free time he has developed an application that was clearly months worth of work that is specific to our employer I and the team are completely greatful for all he is doing, and is clearly an asset to our team. However I'm worried that this is not sustainable. I can almost see that he has the same enthusiasm that I had when I began coding for work, however over the years I've realised that extra curricular work not only doesn't progress your career, but eats into your all important free time. The question I'm asking is: Should I advise him to take things a bit more slowly? Or perhaps I need to learn from him and do more for my employer out of hours?

    Read the article

  • Producer-consumer pattern with consumer restrictions

    - by Dan
    I have a processing problem that I am thinking is a classic producer-consumer problem with the two added wrinkles that there may be a variable number of producers and there is the restriction that no more than one item per producer may be consumed at any one time. I will generally have 50-100 producers and as many consumers as CPU cores on the server. I want to maximize the throughput of the consumers while ensuring that there are never more than one work item in process from any single producer. This is more complicated than the classic producer-consumer problem which I think assumes a single producer and no restriction on which work items may be in progress at any one time. I think the problem of multiple producers is relatively easily solved by enqueuing all work items on a single work queue protected by a critical section. I think the restriction on simultaneously processing work items from any single producer is harder because I cannot think of any solution that does not require each consumer to notify some kind of work dispatcher that a particular work item has been completed so as to lift the restriction on work items from that producer. In other words, if Consumer2 has just completed WorkItem42 from Producer53, there needs to be some kind of callback or notification from Consumer2 to a work dispatcher to allow the work dispatcher to release the next work item from Producer53 to the next available consumer (whether Consumer2 or otherwise). Am I overlooking something simple here? Is there a known pattern for this problem? I would appreciate any pointers.

    Read the article

  • Managing Kindle Fire with on 12.04 via Micro-USB

    - by pirtle
    To begin, I have read both Is there a way to get a Kindle Fire to work with 12.04? and How can I transfer files to a Kindle Fire with a Micro-USB cable? My problem is that I am unable to mount my Kindle Fire in order to add books to it. I have installed calibre, but it is unable to manage any devices until the computer itself has recognized it. The latter post had an excellent answer (provided by @jeremiah) that was making some progress. Unfortunately, I think I don't know enough about the -t flag used with mount. This is what I've done... Ran dmesg to locate the device: [ 3.920886] sd 6:0:0:0: [sdb] Attached SCSI removable disk Confirmed it's location: $ sudo ls -l /dev/disk/by-id lrwxrwxrwx 1 root root 9 Aug 18 15:52 usb-Amazon_Kindle_3C6C002600000001-0:0 -> ../../sdb So we know that my Kindle is recognized on /dev/sdb. I then used the mount command suggested by @jeremiah: $ sudo mount -t ext3 /dev/sdb/ /mnt/kindle/ mount: no medium found on /dev/sdb The same error occurs for sudo mount /dev/sdb /mnt/kindle. Note: I have created the 'kindle' directory in 'mnt' Any suggestions?

    Read the article

  • Contract Work - Lessons Learned

    - by samerpaul
    I thought I would write a post of a different nature today, but still relevant to the tech world. I do a lot of contract jobs myself and really enjoy it. It's nice to keep jumping from project to project, and not having to go to an office or keep regular hours, etc. I really enjoy it. I have learned a lot in the past few years of doing it (both from experience and from help given to me from others, and the internet) so I thought I'd share some of that knowledge/experience today.So here's my own personal "lesson's learned" that hopefully will help you if you find yourself doing contract work:Should I take the job?Ok, so this is the first step. Assuming you were given sufficient information about what they want, then you should really think about what you're capable of doing and whether or not you should take this job. Personally, my rule is, if I know it's possible, I'll say yes, even if I don't yet know how to do it. That's because the internet is such a great help, it would be rare to run into an issue that you can't figure out with some help. So if your clients are asking for something that you don't yet know how to program, but you know you can do it on the platform then go for it. How else are you going to learn?Use this rule with some limitation, however. If you're really lacking the expertise or foundation in something, then unless you have tons of time to complete the project, then I wouldn't say yes. For example, I haven't personally done any 3d/openGL programming yet so I wouldn't say yes to a project that extensively uses it. OK, so I want the job, but how much do I charge?This part can be tricky. There is no set formula really, but I have some tips for pricing that will hopefully give you a better idea on how to confidently ask your price and have them accept. Here are some personal guidelinesHow much time do you have to complete the project? If it's shorter than average, then charge more. You can even make a subtle note about this (or not so subtle if they still don't get it.) If it seems too short of a time (i.e. near impossible to complete), be sure to say that. It looks bad to promise a time that you can't keep--and it makes it less likely for them to return to you for work.Your Hourly rate: How long have you been working in that language? Do you have existing projects to back you up? Or previous contacts that can vouch for your work? Are there very few people with your particular skill set? All of these things will lend themselves to setting an hourly rate. I'd also try out a quick google search of what your line of work is, to see what the industry standard is at that point in time.I wouldn't price too low, because you want to make your time worth it. You also want them to feel like they're paying for quality work (assuming you can deliver it :) ). Finally, think about your client. If it's a small business, then don't price it too high if you want the job. If it's an enterprise (like a Fortune company), then don't be afraid to price higher. They have the budget for it.Fixed price: If they want a fixed price project, then you need to think about how many hours it will take you to complete it and multiply it by the hourly rate you set for yourself. Then, honestly, I would add 10-20% on top of that. Why? Because nothing ever works exactly how you want it to. There are lots of times that something "trivial" is way harder than it should be, or something that "should work" doesn't for hours and it eats away at your hourly rate. I can't count the number of times I encountered a logical bug that took away an entire's day work because debuggers don't help in those cases. By adding that padding in, it's still OK to have those days where you don't get as much done as you want. And another useful tip: Depending on your client, and the scope, you most likely want to set that you both sign off on a specification sheet before doing any work, and that any changes will result in a re-evaulation of the price. This is to help protect you from being handed a huge new addition to the project half-way in, without any extra payment.Scope of project: Finally, is it a huge project? Is it really small/fast? This affects how much your client will be willing to pay. If it sounds big, they will be willing to pay more for it. If it seems really small, then you won't be able to get away with a large asking price (as easily).Ok, I priced it, now what?So now that you have the price, you want to make sure it feels justified to your client. I never set a price before I can really think about everything. For example, if you're still in your introduction phase, and they want a price, don't give one! Just comment that you will send them a proposal sheet with all the features outlined, and a price for everything. You don't want to shout out a low number and then deliver something that is way higher. You also don't want to shock them with a big number before they feel like they are getting a great product.Make up a proposal document in a word editor. Personally, I leave the price till the very end. Why? Because by the time they reach the end, you've already discussed all the great features you plan to implement, and how it's the best product they'll ever use, etc etc...so your price comes off as a steal! If you hit them up front with a price, they will read through the document with a negative bias. Think about those commercials on TV. They always go on about their product, then at the end, ask "What would you pay for something like this? $100? $50? How about $20!!". This is not by accident.Scenario: I finished the job way earlier than expectedYou have two options then. You can either polish the hell out of the application, and even throw in a few bonus features (assuming they are in-line with the customer's needs) or you can sit and wait on it until you near your deadline. Why don't you want to turn it in too early? Because you should treat that extra time as a surplus. If you said it is going to take you 3 weeks, and it took you only 1, you have a surplus of 2 weeks. I personally don't want to let them know that I can do a 3 week project in 1 week. Why not? Because that may not always be the case! I may later have a 3 week project that takes all 3 weeks, but if I set a precedent of delivering super early, then the pressure is on for that longer project. It also makes it harder to quote longer times if you keep delivering too early.Feel free to deliver early, but again, don't do it too early. They may also wonder why they paid you for 3 weeks of work if you're done in 1. They may further wonder if the product sucks, or what is wrong with it, if it's done so early, etc.I would just polish the application. Everyone loves polish in their applications. The smallest details are what make an application go from "functional" to "fantastic". And since you are still delivering on time, then they are still going to be very happy with you.Scenario: It's taking way too long to finish this, and the deadline is nearing/here!So this is not a fun scenario to be in, but it'll happen. Sometimes the scope of the project gets out of hand. The best policy here is OPENNESS/HONESTY. Tell them that the project is taking longer than expected, and give a reasonable time for when you think you'll have it done. I typically explain it in a way that makes it sound like it isn't something that I did wrong, but it's just something about the nature of the project. This really goes for any scenario, to be honest. Just continue to stay open and communicative about your progress. This doesn't mean that you should email them every five minutes (unless they want you to), but it does mean that maybe every few days or once a week, give them an update on where you're at, and what's next. They'll be happy to know they are paying for progress, and it'll make it easier to ask for an extension when something goes wrong, because they know that you've been working on it all along.Final tips and thoughts:In general, contract work is really fun and rewarding. It's nice to learn new things all the time, as mandated by the project ,and to challenge yourself to do things you may not have done before. The key is to build a great relationship with your clients for future work, and for recommendations. I am always very honest with them and I never promise something I can't deliver. Again, under promise, over deliver!I hope this has proved helpful!Cheers,samerpaul

    Read the article

  • Should I start MCPD training now or wait for new exams?

    - by lunchmeat317
    i apologize if this question has been asked before, or if this is the wrong place to put it. I'm beginning my study track for the MCPD certification in Web Development. However, Microsoft plans to retire this certification on July 31st of 2013, along with two of the necessary tests to receive the certification. On MS's site, I can't find a newer certification path to take - I imagine that Microsoft will release new certification paths and new tests for their new software, but I don't know when that will happen. I don't really know anything about Microsoft's process, as this is the first Microsoft certification I'll be studying for. The bottom line is this - I don't want to lose six months waiting for a new test to appear that won't expire, but I don't want to rush to get a certification that will be invalid in six months (or have to reset any progress due to new study material). To those with experience in affairs like this - what is the best course to take, and can I maximize the time I have now (not wait for new testing material)? Is there any way to find material for the new tests that Microsoft will be rolling out? Thank you for your patience. If this is the wrong place to put this question, I would like to request that it be moved to the correct StackExchange site instead of being closed. Thanks for your help!

    Read the article

< Previous Page | 53 54 55 56 57 58 59 60 61 62 63 64  | Next Page >