skip - Page 57 - Developer IT

OpenBSD pf 'match in all scrub (no-df)' causes HTTPS to be unreachable on mobile network

- by Frank ter V.

First of all: excuse me for my poor usage of the English language. For several years I'm experiencing problems with the 'match in all scrub (no-df)' rule in pf. I can't find out what's happening here. I'll try to be clear and simple. The pf.conf has been extremely shortened for this forum posting. Here is my pf.conf: set skip on lo0 match in all scrub (no-df) block all block in quick from urpf-failed pass in on em0 proto tcp from any to 213.125.xxx.xxx port 80 synproxy state pass in on em0 proto tcp from any to 213.125.xxx.xxx port 443 synproxy state pass out on em0 from 213.125.xxx.xxx to any modulate state HTTP and HTTPS are working fine. Until the moment a customer in France (Wanadoo DSL) couldn't view HTTPS pages! I blamed his provider and did no investigation on that problem. But then... I bought an Android Samsung Galaxy SII (Vodafone) to monitor my servers. Hours after I walked out of the telephone store: no HTTPS-connections on my server! I thought my servers were down, drove back to the office very fast. But they were up. I discovered that disabling the rule match in all scrub (no-df) solves the problem. Android phone (Vodafone NL) and Wanadoo DSL FR are now OK on HTTPS. But now I don't have any scrubbing anymore. This is not what I want. Does anyone here understand what is going on? I don't. Enabling scrubbing causes HTTPS webpages not to be loaded on SOME ISP's, but not all. In systat, I strangely DO see a state created and packets received from those ISP's... Still confused. I'm using OpenBSD 5.1/amd64 and OpenBSD 5.0/i386. I have two ISP's at my office (one DSL and one cable). Affects both. This can be reproduced quite easily. I hope someone has experience with this problem. Greetings, Frank

Read the article

Varnish configuration to only cache for non-logged in users

- by davidsmalley

I have a Ruby on Rails application fronted by varnish+nginx. As most of the sites content is static unless you are a logged in user, I want to cache the site heavily with varnish when a user is logged out but only to cache static assets when they are logged in. When a user is logged in they will have the cookie 'user_credentials' present in their Cookie: header, in addition I need to skip caching on /login and /sessions in order that a user can get their 'user_credentials' cookie in the first place. Rails by default does not set a cache friendly Cache-control header, but my application sets a "public,s-max-age=60" header when a user is not logged in. Nginx is set to return 'far future' expires headers for all static assets. The configuration I have at the moment is totally bypassing the cache for everything when logged in, including static assets — and is returning cache MISS for everything when logged out. I've spent hours going around in circles and here is my current default.vcl director rails_director round-robin { { .backend = { .host = "xxx.xxx.xxx.xxx"; .port = "http"; .probe = { .url = "/lbcheck/lbuptest"; .timeout = 0.3 s; .window = 8; .threshold = 3; } } } } sub vcl_recv { if (req.url ~ "^/login") { pipe; } if (req.url ~ "^/sessions") { pipe; } # The regex used here matches the standard rails cache buster urls # e.g. /images/an-image.png?1234567 if (req.url ~ "\.(css|js|jpg|jpeg|gif|ico|png)\??\d*$") { unset req.http.cookie; lookup; } else { if (req.http.cookie ~ "user_credentials") { pipe; } } # Only cache GET and HEAD requests if (req.request != "GET" && req.request != "HEAD") { pipe; } } sub vcl_fetch { if (req.url ~ "^/login") { pass; } if (req.url ~ "^/sessions") { pass; } if (req.http.cookie ~ "user_credentials") { pass; } else { unset req.http.Set-Cookie; } # cache CSS and JS files if (req.url ~ "\.(css|js|jpg|jpeg|gif|ico|png)\??\d*$") { unset req.http.Set-Cookie; } if (obj.status >=400 && obj.status <500) { error 404 "File not found"; } if (obj.status >=500 && obj.status <600) { error 503 "File is Temporarily Unavailable"; } } sub vcl_deliver { if (obj.hits > 0) { set resp.http.X-Cache = "HIT"; } else { set resp.http.X-Cache = "MISS"; } }

Read the article

Mysql server fails to start

- by Nicolas Thery

Googling since two hours, I require your assistance. I'm on a Debian virtual machine and I cloned it. The only change is the new IP adress it has. Mysql doesn't start any more: Starting MySQL database server: mysqld . . . . . . . . . . . . . . failed! There is no process called mysql. All the mysql log files in /var/log are empty. here is my.cnf file : [client] port = 3306 socket = /var/run/mysqld/mysqld.sock [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] user = mysql pid-file = /var/run/mysqld/mysqld.pid socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp language = /usr/share/mysql/english skip-external-locking bind-address = 127.0.0.1 key_buffer = 16M max_allowed_packet = 16M thread_stack = 192K thread_cache_size = 8 myisam-recover = BACKUP query_cache_limit = 1M query_cache_size = 16M general_log_file = /var/log/mysql/mysql.log log_bin = /var/log/mysql/mysql-bin.log expire_logs_days = 10 max_binlog_size = 100M [mysqldump] quick quote-names max_allowed_packet = 16M [mysql] [isamchk] key_buffer = 16M [mysqld_safe] syslog Here is the result of ifconfig : eth0 Link encap:Ethernet HWaddr 00:0c:29:12:98:9a inet adr:192.168.1.138 Bcast:192.168.1.255 Masque:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:754 errors:0 dropped:0 overruns:0 frame:0 TX packets:106 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:1000 RX bytes:101177 (98.8 KiB) TX bytes:17719 (17.3 KiB) lo Link encap:Boucle locale inet adr:127.0.0.1 Masque:255.0.0.0 adr inet6: ::1/128 Scope:Hôte UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:8 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:0 RX bytes:560 (560.0 B) TX bytes:560 (560.0 B) As requested, here is the result of : sudo -u mysql mysqld, here is the result : root@debian:/home/nicolas/Bureau# sudo -u mysql mysqld 121004 14:26:57 [Note] Plugin 'FEDERATED' is disabled. mysqld: Can't find file: './mysql/plugin.frm' (errno: 13) 121004 14:26:57 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it. 121004 14:26:57 InnoDB: Initializing buffer pool, size = 8.0M 121004 14:26:57 InnoDB: Completed initialization of buffer pool 121004 14:26:57 InnoDB: Started; log sequence number 0 70822697 121004 14:26:57 [Note] Recovering after a crash using /var/log/mysql/mysql-bin 121004 14:26:57 [Note] Starting crash recovery... 121004 14:26:57 [Note] Crash recovery finished. 121004 14:26:57 [ERROR] mysqld: Can't find file: './mysql/host.frm' (errno: 13) 121004 14:26:57 [ERROR] Fatal error: Can't open and lock privilege tables: Can't find file: './mysql/host.frm' (errno: 13)

Read the article

qpid-cpp-client won't update through yum

- by alexus

somewhere around last week I received a notification for update, so I've tried "yum update" and that's what I'm getting... [alexus@wcmisdlin02 ~]$ sudo yum update Loaded plugins: refresh-packagekit Setting up Update Process Resolving Dependencies --> Running transaction check ---> Package qpid-cpp-client.x86_64 0:0.10-3.el6 will be updated --> Processing Dependency: libqpidclient.so.5()(64bit) for package: matahari-service-0.4.0-5.el6.x86_64 --> Processing Dependency: libqpidclient.so.5()(64bit) for package: matahari-host-0.4.0-5.el6.x86_64 --> Processing Dependency: libqpidclient.so.5()(64bit) for package: matahari-net-0.4.0-5.el6.x86_64 --> Processing Dependency: libqpidcommon.so.5()(64bit) for package: matahari-service-0.4.0-5.el6.x86_64 --> Processing Dependency: libqpidcommon.so.5()(64bit) for package: matahari-host-0.4.0-5.el6.x86_64 --> Processing Dependency: libqpidcommon.so.5()(64bit) for package: matahari-net-0.4.0-5.el6.x86_64 ---> Package qpid-cpp-client.x86_64 0:0.14-22.el6_3 will be an update ---> Package qpid-cpp-client-ssl.x86_64 0:0.10-3.el6 will be updated ---> Package qpid-cpp-client-ssl.x86_64 0:0.14-22.el6_3 will be an update ---> Package qpid-qmf.x86_64 0:0.10-6.el6 will be updated ---> Package qpid-qmf.x86_64 0:0.14-14.el6_3 will be an update --> Finished Dependency Resolution Error: Package: matahari-net-0.4.0-5.el6.x86_64 (@anaconda-ScientificLinux-201107271550.x86_64) Requires: libqpidcommon.so.5()(64bit) Removing: qpid-cpp-client-0.10-3.el6.x86_64 (@anaconda-ScientificLinux-201107271550.x86_64) libqpidcommon.so.5()(64bit) Updated By: qpid-cpp-client-0.14-22.el6_3.x86_64 (sl-security) Not found Error: Package: matahari-net-0.4.0-5.el6.x86_64 (@anaconda-ScientificLinux-201107271550.x86_64) Requires: libqpidclient.so.5()(64bit) Removing: qpid-cpp-client-0.10-3.el6.x86_64 (@anaconda-ScientificLinux-201107271550.x86_64) libqpidclient.so.5()(64bit) Updated By: qpid-cpp-client-0.14-22.el6_3.x86_64 (sl-security) Not found Error: Package: matahari-service-0.4.0-5.el6.x86_64 (@anaconda-ScientificLinux-201107271550.x86_64) Requires: libqpidclient.so.5()(64bit) Removing: qpid-cpp-client-0.10-3.el6.x86_64 (@anaconda-ScientificLinux-201107271550.x86_64) libqpidclient.so.5()(64bit) Updated By: qpid-cpp-client-0.14-22.el6_3.x86_64 (sl-security) Not found Error: Package: matahari-service-0.4.0-5.el6.x86_64 (@anaconda-ScientificLinux-201107271550.x86_64) Requires: libqpidcommon.so.5()(64bit) Removing: qpid-cpp-client-0.10-3.el6.x86_64 (@anaconda-ScientificLinux-201107271550.x86_64) libqpidcommon.so.5()(64bit) Updated By: qpid-cpp-client-0.14-22.el6_3.x86_64 (sl-security) Not found Error: Package: matahari-host-0.4.0-5.el6.x86_64 (@anaconda-ScientificLinux-201107271550.x86_64) Requires: libqpidcommon.so.5()(64bit) Removing: qpid-cpp-client-0.10-3.el6.x86_64 (@anaconda-ScientificLinux-201107271550.x86_64) libqpidcommon.so.5()(64bit) Updated By: qpid-cpp-client-0.14-22.el6_3.x86_64 (sl-security) Not found Error: Package: matahari-host-0.4.0-5.el6.x86_64 (@anaconda-ScientificLinux-201107271550.x86_64) Requires: libqpidclient.so.5()(64bit) Removing: qpid-cpp-client-0.10-3.el6.x86_64 (@anaconda-ScientificLinux-201107271550.x86_64) libqpidclient.so.5()(64bit) Updated By: qpid-cpp-client-0.14-22.el6_3.x86_64 (sl-security) Not found You could try using --skip-broken to work around the problem You could try running: rpm -Va --nofiles --nodigest [alexus@wcmisdlin02 ~]$ any ideas?

Read the article

Unable to connect to SVN server on VPS : Subversion Configuration Problem

- by Pritam Barhate

Hello everybody, I purchased a VPS account (centos-5-x86_64) from Hostgator mainly for the purpose of setting up an online Subversion Server. This is the first time I am managing a VPS and my linux skills are not so great, but I have basic knowledge of the OS and have been using it on and off as desktop from last few years. So after foxing through a few tutorials online, as the first step I logged in using SSH root account provided by Hostgator and tried to run, yum install mod_dav_svn subversion As it turns out my account has Cpanel/WHM and since it some concept of easy apache straight forward procedure of yum install mod_dav_svn subversion won't work. After that I found out how it can be worked out by compiling the source and stuff. But the whole procedure looked long and scary. [I am just a linux nub]. so I decided I would just skip whole apache integration stuff and just access the server using svn:// protocol, anyways that's how I configure svn on our LAN. So I installed subversion using yum install subversion It installed fine. Then I created a folder /svn_repos/testproject and ran svnadmin create /svn_repos/testproject/ No Problems Using vi I changed svnserve.conf and passwd files for the repository and added a user with my name. Anonymous users don't have any access, authenticated users have write access. Then I started svnserve using svnserve -d then in same terminal window svn list svn://localhost/svn_repos/testproject Asks for authentication for realm, provided root password then for svn username and password. Provided both. The command returns nothing but exists properly. Returns nothing is understood I didn't import anything. But if try to access svn remotely using in another terminal: svn list svn://ip.add.of.server/svn_repos/testproject svn: Can't connect to host 'ip.add.of.server': Operation timed out Is what I get. Parallels Power Panel that I got from Hostgator reports that: The firewall is not active now. To activate the firewall, choose one of the firewall operation modes. So if firewall is not running and I can access svn using localhost, why the operation is timing out when I try to access svn from a remote machine? Experienced network admins please help. Thanks in advance. Also please suggest a good book which gives detailed information on configuring Dedicated servers + WHM and CPanel.

Read the article

How to make Horde connect to mysql with UTF-8 character set?

- by jkj

How to tell horde 3.3.11 to use UTF-8 for it's mysql connection? The $conf['sql']['charset'] only tells horde what is expected from the database. Horde uses MDB2 to connect to mysql. Is there way to force MDB2 or mysql character_set_client from php.ini? So far I found two workarounds: Force mysql to ignore character set requested by client [mysqld] skip-character-set-client-handshake=1 default-character-set=utf8 Force mysql to run SET NAMES utf8 on every connection [mysqld] init-connect='SET NAMES utf8' Both have drawbacks on multi user mysql server. The first disables converting character sets alltogether and the second one forces every connection to produce UTF-8. [EDIT] Found the problem. The 'charset' parameter was unset the last minute before sending to SQL backend. This is probably due to mysql not being able to digest utf-8 but utf8. Mysql specific mapping is required to make it work. I just worked around it by translating utf-8 - utf8. Won't work with any other databases with this patch though. --- lib/Horde/Share/sql.php.orig 2011-07-04 17:09:33.349334890 +0300 +++ lib/Horde/Share/sql.php 2011-07-04 17:11:06.238636462 +0300 @@ -753,7 +753,13 @@ /* Connect to the sql server using the supplied parameters. */ require_once 'MDB2.php'; $params = $this->_params; - unset($params['charset']); + + if ($params['charset'] == 'utf-8') { + $params['charset'] = 'utf8'; + } else { + unset($params['charset']); + } + $this->_write_db = &MDB2::factory($params); if (is_a($this->_write_db, 'PEAR_Error')) { Horde::fatal($this->_write_db, __FILE__, __LINE__); @@ -792,7 +798,13 @@ /* Check if we need to set up the read DB connection seperately. */ if (!empty($this->_params['splitread'])) { $params = array_merge($params, $this->_params['read']); - unset($params['charset']); + + if ($params['charset'] == 'utf-8') { + $params['charset'] = 'utf8'; + } else { + unset($params['charset']); + } + $this->_db = &MDB2::singleton($params); if (is_a($this->_db, 'PEAR_Error')) { Horde::fatal($this->_db, __FILE__, __LINE__);

Read the article

Recover harddrive data

- by gameshints

I have a dell laptop that recently "died" (It would get the blue screen of death upon starting) and the hard drive would make a weird cyclic clicking noises. I wanted to see if I could use some tools on my linux machine to recover the data, so I plugged it into there. If I run "fdisk" I get: Disk /dev/sdb: 20.0 GB, 20003880960 bytes 64 heads, 32 sectors/track, 19077 cylinders Units = cylinders of 2048 * 512 = 1048576 bytes Disk identifier: 0x64651a0a Disk /dev/sdb doesn't contain a valid partition table Fine, the partition table is messed up. However if I run "testdisk" in attempt to fix the table, it freezes at this point, making the same cyclical clicking noises: Disk /dev/sdb - 20 GB / 18 GiB - CHS 19078 64 32 Analyse cylinder 158/19077: 00% I don't really care about the hard drive working again, and just the data, so I ran "gpart" to figure out where the partitions used to be. I got this: dev(/dev/sdb) mss(512) chs(19077/64/32)(LBA) #s(39069696) size(19077mb) * Warning: strange partition table magic 0x2A55. Primary partition(1) type: 222(0xDE)(UNKNOWN) size: 15mb #s(31429) s(63-31491) chs: (0/1/1)-(3/126/63)d (0/1/32)-(15/24/4)r hex: 00 01 01 00 DE 7E 3F 03 3F 00 00 00 C5 7A 00 00 Primary partition(2) type: 007(0x07)(OS/2 HPFS, NTFS, QNX or Advanced UNIX) (BOOT) size: 19021mb #s(38956987) s(31492-38988478) chs: (4/0/1)-(895/126/63)d (15/24/5)-(19037/21/31)r hex: 80 00 01 04 07 7E FF 7F 04 7B 00 00 BB 6F 52 02 So I tried to mount just to the old NTFS partition, but got an error: sudo mount -o loop,ro,offset=16123904 -t ntfs /dev/sdb /mnt/usb NTFS signature is missing. Ugh. Okay. But then I tried to get a raw data dump by running dd if=/dev/sdb of=/home/erik/brokenhd skip=31492 count=38956987 But the file got up to 59885568 bytes, and made the same cyclical clicking noises. Obviously there is a bad sector, but I don't know what to do about it! The data is still there... if I view that 57MB file in textpad... I can see raw data from files. How can I get my data back? Thanks for any suggestions, Solution: I was able to recover about 90% of my data: Froze harddrive in freezer Used Ddrescue to make a copy of the drive Since Ddrescue wasn't able to get enough of my drive to use testdisk to recover my partitions/file system, I ended up using photorec to recover most of my files

Read the article

Anyone else experiencing high rates of Linux server crashes during a leap second day?

- by Bron Gondwana

POSTMORTEM Anticlimax: only thing that died was my VPN (openvpn) link to the cluster, so there was an exciting few seconds while it re-established. Everything else was fine. Starting back ntp everywhere. If you look at Marco's blog at http://my.opera.com/marcomarongiu/blog/2012/06/01/an-humble-attempt-to-work-around-the-leap-second - he has a solution for phasing the time change over 24 hours using ntpd -x to avoid the 1 second skip. Give that a go if it matters to you. For the systems I run, the jump isn't a problem. Just today, Sat June 30th - starting soon after the start of the day GMT. We've had a handful of blades in different datacentres as managed by different teams all go dark - not responding to pings, screen blank. They're all running Debian Squeeze - with everything from stock kernel to custom 3.2.21 builds. Most are Dell M610 blades, but I've also just lost a Dell R510 and other departments have lost machines from other vendors too. There was also an older IBM x3550 which crashed and which I thought might be unrelated, but now I'm wondering. The one crash which I did get a screen dump from said: [3161000.864001] BUG: spinlock lockup on CPU#1, ntpd/3358 [3161000.864001] lock: ffff88083fc0d740, .magic: dead4ead, .owner: imapd/24737, .owner_cpu: 0 Unfortunately the blades all supposedly had kdump configured, but they died so hard that kdump didn't trigger - and they had console blanking turned on. I've disabled console blanking now, so fingers crossed I'll have more information after the next crash. Just want to know if it's a common thread or "just us". It's really odd that they're different units in different datacentres bought at different times and run by different admins (I run the FastMail.FM ones)... and now even different vendor hardware. Most of the machines which crashed had been up for weeks/months and were running 3.1 or 3.2 series kernels. The most recent crash was a machine which had only been up about 6 hours running 3.2.21. THE WORKAROUND Ok people, here's how I worked around it. disabled ntp: /etc/init.d/ntp stop created http://linux.brong.fastmail.fm/2012-06-30/fixtime.pl (code stolen from Marco, see blog posts in comments) ran fixtime.pl without an argument to see that there was a leap second set ran fixtime.pl with an argument to remove the leap second NOTE: depends on adjtimex. I've put a copy of the squeeze adjtimex binary at http://linux.brong.fastmail.fm/2012-06-30/adjtimex - it will run without dependencies on a squeeze 64 bit system. If you put it in the same directory as fixtime.pl, it will be used if the system one isn't present. Obviously if you don't have squeeze 64 bit... find your own. I'm going to start ntp again tomorrow. As an anonymous user suggested - an alternative to running adjtimex is to just set the time yourself, which will presumably also clear the leapsecond counter.

Read the article

Error: Multilib version problems found

- by Kovács Ákos

What causes this error? Error: Multilib version problems found. This often means that the root cause is something else and multilib version checking is just pointing out that there is a problem. Eg.: 1. You have an upgrade for glibc which is missing some dependency that another package requires. Yum is trying to solve this by installing an older version of glibc of the different architecture. If you exclude the bad architecture yum will tell you what the root cause is (which package requires what). You can try redoing the upgrade with --exclude glibc.otherarch ... this should give you an error message showing the root cause of the problem. 2. You have multiple architectures of glibc installed, but yum can only see an upgrade for one of those arcitectures. If you don't want/need both architectures anymore then you can remove the one with the missing update and everything will work. 3. You have duplicate versions of glibc installed already. You can use "yum check" to get yum show these errors. ...you can also use --setopt=protected_multilib=false to remove this checking, however this is almost never the correct thing to do as something else is very likely to go wrong (often causing much more problems). Protected multilib versions: glibc-2.12-1.107.el6_4.5.i686 != glibc-2.12-1.107.el6_4.2.x86_64 Error: Protected multilib versions: db4-4.7.25-18.el6_4.i686 != db4-4.7.25-17.el6.x86_64 You could try using --skip-broken to work around the problem ** Found 10 pre-existing rpmdb problem(s), 'yum check' output follows: 32:bind-libs-9.8.2-0.17.rc1.el6_4.6.x86_64 is a duplicate with 32:bind-libs-9.8.2-0.17.rc1.el6_4.5.x86_64 chkconfig-1.3.49.3-2.el6_4.1.x86_64 is a duplicate with chkconfig-1.3.49.3-2.el6.x86_64 db4-4.7.25-18.el6_4.x86_64 is a duplicate with db4-4.7.25-17.el6.x86_64 12:dhcp-common-4.1.1-34.P1.el6_4.1.x86_64 is a duplicate with 12:dhcp-common-4.1.1-34.P1.el6.centos.x86_64 glibc-2.12-1.107.el6_4.5.x86_64 is a duplicate with glibc-2.12-1.107.el6_4.2.x86_64 glibc-common-2.12-1.107.el6.x86_64 has missing requires of glibc = ('0', '2.12', '1.107.el6') glibc-common-2.12-1.107.el6_4.2.x86_64 is a duplicate with glibc-common-2.12-1.107.el6.x86_64 glibc-common-2.12-1.107.el6_4.5.x86_64 is a duplicate with glibc-common-2.12-1.107.el6_4.2.x86_64 krb5-libs-1.10.3-10.el6_4.6.x86_64 is a duplicate with krb5-libs-1.10.3-10.el6_4.4.x86_64 tzdata-2013g-1.el6.noarch is a duplicate with tzdata-2013c-2.el6.noarch

Read the article

PHP versions warning on Plesk 11.0.9 upgrade on CentOS server

- by Pixman

I have a server turning on Plesk 10.4.4 and I want to upgrade it to 11.0.9. When I use the online upgrade tool, I have this warning: Parallels Panel pre-upgrade check... WARNING: You have a mixed set of 'php' and 'php53' packages installed. Installation or upgrade may fail or produce unexpected results. To resolve this issue run "sed -i.bak -e '/^\s*skip-bdb\s*$/d' /etc/my.cnf ; yum update 'php*' 'mysql*'". PHP Warning: Directive 'safe_mode' is deprecated in PHP 5.3 and greater in Unknown on line 0 I have run the code in ssh, but nothing changes. I have already searched all package names with "php", and I have this list: # yum list installed | grep php php-common.i386 5.3.13-5.el5.art installed php-pear.noarch 1:1.4.9-8.el5 installed php5-ioncube-loader.i386 4.0.7-11062118 installed php53.i386 5.3.3-13.el5_8 installed php53-cli.i386 5.3.3-13.el5_8 installed php53-devel.i386 5.3.3-13.el5_8 installed php53-gd.i386 5.3.3-13.el5_8 installed php53-imap.i386 5.3.3-13.el5_8 installed php53-mbstring.i386 5.3.3-13.el5_8 installed php53-mcrypt.i386 5.3.3-1.el5 installed php53-mysql.i386 5.3.3-13.el5_8 installed php53-pdo.i386 5.3.3-13.el5_8 installed php53-sqlite2.i386 5.3.2-11041315 installed php53-xml.i386 5.3.3-13.el5_8 installed psa-appvault-phpads.noarch 2.0.8-8203520080409011611 installed psa-appvault-phpbb.noarch 3.0.0-8200820080409011626 installed psa-appvault-phpbook.noarch 1.50-8203220080409011638 installed psa-appvault-phpbugtracker.noarch 1.19-8203820080416050605 installed psa-appvault-phpdig.noarch 1.85-8203120080409011645 installed psa-appvault-phpmoney.noarch 1.3-8204320080409011649 installed psa-appvault-phpmyfamily.noarch 1.4.1-8203420080409011655 installed psa-appvault-phpmyvisites.noarch 2.3-8202820080409011701 installed psa-appvault-phprojekt.noarch 5.2-8200820080409011713 installed psa-appvault-phpsurveyor.noarch 0.98-8204320080409011723 installed psa-appvault-phpwebsite.noarch 0.10.2-8203420080409011738 installed psa-appvault-phpwiki.noarch 1.3.11-8204320080409011808 installed psa-php53-configurator.i386 1.6.1-cos5.build1013111101.14 installed After verification in the Plesk file: panel_preupgrade_checker.php I think the warning is due to these lines: (from : panel_preupgrade_checker.php) foreach ($packages as $package) { $name = $package['name']; $hasPhp5 |= ($name == 'php' || strpos($name, 'php-') === 0); $hasPhp53 |= (strpos($name, 'php53') === 0); } Now, I think the problem is just due to the names of theses packages: php-common.i386 5.3.13-5.el5.art installed php-pear.noarch 1:1.4.9-8.el5 installed Can you help me to resolve this situation?

Read the article

Can Remote Desktop Services be deployed and administered by PowerShell alone, without a Domain in WIndows Server 2012 and 2012 R2?

- by Warren P

Windows Server 2008 R2 allowed deployment of Terminal Server (Remote Desktop Services) without a domain, and without any insistence on domains. This was very useful, especially for standalone virtual or cloud deployments of a server that is managed remotely for a remote client who has no need or desire for any ActiveDirectory or Domain features. This has become steadily more and more difficult as Microsoft restricts its technologies further and further in each Windows release. With Windows Server 2012, configuring licensing for Remote Desktop Services, is more difficult when not on a domain, but possible still. With Windows Server 2012 R2 (at least in the preview) the barriers are now severe: The Add/Remove Roles and Features wizard in Windows Server 2012 R2 has a special RDS deployment mode that has a rule that says if you aren't on a domain you can't deploy. It tells you to create or join a domain first. This of course comes in direct conflict with the fact that an Active Directory domain controller should not be the same machine as a terminal server machine. So Microsoft's technology is not such much a Cloud Operating System as a Cluster of Unwanted Nodes, needed to support the one machine I actually WANT to deploy. This is gross, and so I am trying to find a workaround. However if you skip that wizard and just go check the checkboxes in the main Roles/Features wizard, you can deploy the features, but the UI is not there to configure them, and when you go back to the RDS configuration page on the roles wizard, you get a message saying you can not administer your Remote Desktop Services system when you are logged in as a Local-Computer Administrator, because although you have all admin priveleges you could have (in your workgroup based system), the RDS configuration UI will not accept those credentials and let you continue. My question in brief is, can I still somehow, obtain the following end result: I need to allow 10-20 users per system to have an RDS (TS) session. I do not need any of the fancy pants RDS options, unless Microsoft somehow depends on those features being present. I believe I need the "RDS Session Host" as this is the guts of "Terminal Server". Microsoft says it is "full Windows desktop for Remote Desktop Services client. I need to configure licensing so that the Grace Period does not expire leaving my RDS non functional, so this probably means I need a way to configure TS CALs. If all of the above could technically be done with the judicious use of the PowerShell, I am prepared to even consider developing all the PowerShell scripts I would need to do the above. I'm not asking someone to write that for me. What I'm asking is, does anyone know if there is a technical impediment to what I want to do above, other than the deliberate crippling of the 2012 R2 UI for Workgroup users? Would the underlying technologies all still work if I manipulate and control them from a PowerShell script? Obviously a 1 word Yes or No answer isn't that useful to anyone, so the question is really, yes or no, and why? In the case the answer is Yes, then how.

Read the article

Galera install failure on Fedora 18

- by ehime

I've been trying to reinstall MariaDB and have been encountering multiple issues, $ yum install Mariadb-Galera-server Error: Package: MariaDB-Galera-server-5.5.29-1.i386 (mariadb) Requires: galera Available: galera-23.2.4-1.rhel5.i386 (mariadb) galera galera = 23.2.4-1.rhel5 You could try using --skip-broken to work around the problem You could try running: rpm -Va --nofiles --nodigest there is a requirement that libssl.so.6 and libcrypto.ssl.6 are installed, these DO show up in my /lib64 and /lib though as linked items. /usr/lib -rwxr-xr-x 1 root root 1356700 Nov 23 2010 libcrypto.so.0.9.8e lrwxrwxrwx 1 root root 19 Jun 28 12:03 libcrypto.so.6 -> libcrypto.so.0.9.8e -rwxr-xr-x. 1 root root 394272 Mar 18 14:22 libssl.so.1.0.1e lrwxrwxrwx 1 root root 16 Jun 28 12:03 libssl.so.6 -> libssl.so.0.9.8e /usr/lib64 -rwxr-xr-x 1 root root 1849680 Mar 18 14:21 libcrypto.so.1.0.1e lrwxrwxrwx 1 root root 26 Jun 28 11:54 libcrypto.so.6 -> /lib64/libcrypto.so.1.0.1e -rwxr-xr-x 1 root root 421712 Mar 18 14:21 libssl.so.1.0.1e lrwxrwxrwx 1 root root 23 Jun 28 11:54 libssl.so.6 -> /lib64/libssl.so.1.0.1e So the deps SHOULD be met, trying to $ yum install galera returns this Resolving Dependencies --> Running transaction check ---> Package galera.i386 0:23.2.4-1.rhel5 will be installed --> Restarting Dependency Resolution with new changes. --> Running transaction check ---> Package galera.i386 0:23.2.4-1.rhel5 will be installed --> Finished Dependency Resolution No errors? but no install either .... ? lets try wget and rpm'ing the package instead I guess? $ wget https://launchpad.net/galera/2.x/23.2.4/+download/galera-23.2.4-1.rhel5.x86_64.rpm $ rpm -ivh galera-23.2.4-1.rhel5.x86_64.rpm This issues the dreaded error: Failed dependencies: libcrypto.so.6()(64bit) is needed by galera-23.2.4-1.rhel5.x86_64 libssl.so.6()(64bit) is needed by galera-23.2.4-1.rhel5.x86_64 But we saw above these packages are here =( Whats going on?? Is openssl not installed? $ yum install openssl Loaded plugins: langpacks, presto, refresh-packagekit Package 1:openssl-1.0.1e-4.fc18.x86_64 already installed and latest version Nothing to do Its there.... ??? wth Fedora?

Read the article

I can't connect to mysql on a remote server

- by eisaacson

I'm trying to connect from an Ubuntu server to a RHEL6 server using mysql. I've tried telneting into the server as well as trying to connect with mysql. I've tried commenting out the bind-address but didn't have any success with that either. I don't get an error code or anything with telnet. It just fails after a minute or so. With mysql, I get this error code ERROR 2003 (HY000): Can't connect to MySQL server on 'SERVER_IP' (111). "SERVER_IP" is of course a placeholder where actual error gives that actual IP. I've included my my.cnf as well as well as my iptables from the destination server. On Destination Server... my.cnf: [mysqld] bind-address=0.0.0.0 tmp_table_size=512M max_heap_table_size=512M sort_buffer_size=32M read_buffer_size=128K read_rnd_buffer_size=256K table_cache=2048 key_buffer_size=512M thread_cache_size=50 query_cache_type=1 query_cache_size=256M query_cache_limit=24M #query_alloc_block_size=128 #query_cache_min_res_unit=128 innodb_log_buffer_size=16M innodb_flush_log_at_trx_commit=2 innodb_file_per_table innodb_log_files_in_group=2 innodb_buffer_pool_size=32G innodb_log_file_size=512M innodb_additional_mem_pool_size=20M join_buffer_size=128K max_allowed_packet=100M max_connections=256 wait_timeout=28800 interactive_timeout=3600 # modify isolation method for faster inserting. # Do not uncomment the line below unless you understand what this does. # transaction-isolation = READ-COMMITTED # do not reverse lookup clients skip-name-resolve #long_query_time=6 #log_slow_queries=/var/log/mysqld-slow.log #log_queries_not_using_indexes=On #log_slow_admin_statements=On datadir=/var/lib/mysql socket=/var/lib/mysql/mysql.sock user=mysql # Disabling symbolic-links is recommended to prevent assorted security risks symbolic-links=0 #Added by Magento ECG long_query_time=1 slow_query_log [mysqld_safe] log-error=/var/log/mysqld.log pid-file=/var/run/mysqld/mysqld.pid iptables: :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT -A INPUT -p icmp -j ACCEPT -A INPUT -i lo -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 3306 -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 225 -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp -i eth1 --dport 11211 -j ACCEPT -A INPUT -j REJECT --reject-with icmp-host-prohibited -A FORWARD -j REJECT --reject-with icmp-host-prohibited COMMIT sudo netstat -ntpl Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN - tcp 0 0 0.0.0.0:11211 0.0.0.0:* LISTEN - tcp 0 0 0.0.0.0:2123 0.0.0.0:* LISTEN - tcp 0 0 0.0.0.0:1581 0.0.0.0:* LISTEN - tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN - tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN - tcp 0 0 :::11211 :::* LISTEN - tcp 0 0 :::22 :::* LISTEN - tcp 0 0 :::225 :::* LISTEN -

Read the article

IIRF reverse proxy problem

- by Sergei

Hi everyone, We have a java application ( Atlassian Bamboo) running on port 8085 on Windows 2003. It is accessile as http: //bamboo:8085. I am trying to setup reverse proxy for IIS6 using IIRF so content is accessible via http: //bamboo. It seems that I set it ip correctly, and I can retrieve Status page. This is how my IIRF.ini looks like: RewriteLog c:\temp\iirf RewriteLogLevel 2 StatusUrl /iirfStatus RewriteCond %{HTTP_HOST} ^bambooi$ [I] #This setup works #ProxyPass ^/(.*)$ http://othersite/$1 #This does not ProxyPass ^/(.*)$ http://bamboo:8085/$1 However when I type in http: //bamboo in IE, I get 'page cannot be displayed ' message. FF does not return anything at all. I made Wireshark network dump, selected 'follow TCPstream' and it seems like correct page is being retrieved.Why cannot I see it then? I also noticed that I can retrieve http: //bamboo/favicon.ico so I must be very close to the solution.. This is the Wireshark output: GET / HTTP/1.1 Accept: image/gif, image/jpeg, image/pjpeg, image/pjpeg, application/x-shockwave-flash, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, application/x-ms-application, application/x-ms-xbap, application/vnd.ms-xpsdocument, application/xaml+xml, */* Accept-Language: en-gb User-Agent: Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729) Accept-Encoding: gzip, deflate Host: bamboo Connection: Keep-Alive Cookie: JSESSIONID=wpsse0zyo4g5 HTTP/1.1 200 200 OK Date: Sat, 30 Jan 2010 09:19:46 GMT Server: Microsoft-IIS/6.0 Via: 1.1 DESTINATION_IP (IIRF 2.0) Content-Type: text/html; charset=utf-8 Transfer-Encoding: chunked <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en"> <head> <title>Dashboard</title> <meta http-equiv="content-type" content="text/html; charset=UTF-8" /> <meta name="robots" content="all" /> <meta name="MSSmartTagsPreventParsing" content="true" /> <meta http-equiv="Pragma" content="no-cache" /> <meta http-equiv="Expires" content="-1" /> <link type="text/css" rel="stylesheet" href="/s/1206/1/_/scripts/yui-2.6.0/build/grids/grids.css" />  <link rel="stylesheet" href="/s/1206/1/_/styles/main.css" type="text/css" /> <link rel="stylesheet" href="/s/1206/1/_/styles/main2.css" type="text/css" /> <link rel="stylesheet" href="/s/1206/1/_/styles/global-static.css" type="text/css" /> <link rel="stylesheet" href="/s/1206/1/_/styles/widePlanList.css" type="text/css" /> <link rel="stylesheet" href="/s/1206/1/_/styles/forms.css" type="text/css" /> <link rel="stylesheet" href="/s/1206/1/_/styles/yui-support/yui-custom.css" type="text/css" /> <link rel="shortcut icon" href="/s/1206/1/_/images/icons/favicon.ico" type="image/x-icon"/> <link rel="icon" href="/s/1206/1/_/images/icons/favicon.png" type="image/png" /> <link rel="stylesheet" href="/s/1206/1/_/styles/bamboo-tabs.css" type="text/css" />  <link rel="stylesheet" type="text/css" href="/s/1206/1/_/scripts/yui-2.6.0/build/tabview/assets/tabview-core.css"> <link rel="stylesheet" type="text/css" href="/s/1206/1/_/scripts/yui-2.6.0/build/tabview/assets/skins/sam/tabview-skin.css"> <script type="text/javascript" src="/s/1206/1/_/scripts/yui-2.6.0/build/yahoo/yahoo-min.js"></script> <script type="text/javascript" src="/s/1206/1/_/scripts/yui-2.6.0/build/event/event-min.js" ></script> <script type="text/javascript" src="/s/1206/1/_/scripts/yui-2.6.0/build/dom/dom-min.js" ></script>   <script type="text/javascript" src="/s/1206/1/_/scripts/yui-2.6.0/build/container/container-min.js"></script> <script type="text/javascript" src="/s/1206/1/_/scripts/yui-2.6.0/build/connection/connection-min.js"></script> <link type="text/css" rel="stylesheet" href="/s/1206/1/_/scripts/yui-2.6.0/build/container/assets/container.css" />  <script type="text/javascript" src="/s/1206/1/_/scripts/yui-2.6.0/build/menu/menu-min.js"></script> <link type="text/css" rel="stylesheet" href="/s/1206/1/_/scripts/yui-2.6.0/build/menu/assets/menu.css" />   <script type="text/javascript" src="/s/1206/1/_/scripts/yui-2.6.0/build/yahoo-dom-event/yahoo-dom-event.js"></script> <script type="text/javascript" src="/s/1206/1/_/scripts/yui-2.6.0/build/element/element-beta-min.js"></script>  <link rel="stylesheet" href="/s/1206/1/_/styles/yui-support/tabview.css" type="text/css" /> <link rel="stylesheet" href="/s/1206/1/_/styles/yui-support/round_tabs.css" type="text/css" /> <script type="text/javascript" src="/s/1206/1/_/scripts/yui-2.6.0/build/tabview/tabview-min.js"></script> <script type="text/javascript" src="/s/1206/1/_/scripts/yui-2.6.0/build/json/json-min.js"></script> <script type="text/javascript" src="/s/1206/1/_/scripts/yui-ext/yui-ext-nogrid.js"></script> <script type="text/javascript" src="/s/1206/1/_/scripts/bamboo.js"></script> <script type="text/javascript"> YAHOO.namespace('bamboo'); YAHOO.bamboo.tooltips = new Object(); YAHOO.bamboo.contextPath = ''; YAHOO.ext.UpdateManager.defaults.loadScripts = true; YAHOO.ext.UpdateManager.defaults.indicatorText = '<div class="loading-indicator">Currently loading...</div>'; YAHOO.ext.UpdateManager.defaults.timeout = 60; addUniversalOnload(addConfirmationToLinks); </script> <link rel="alternate" type="application/rss+xml" title="Bamboo RSS feed" href="/rss/createAllBuildsRssFeed.action?feedType=rssAll" /> </head> <body> <ul id="top"> <li id="skipNav"> <a href="#menu">Skip to navigation</a> </li> <li> <a href="#content">Skip to content</a> </li> </ul> <div id="nonFooter"> <div id="hd"> <div id="header"> <div id="logo"> <a href="/start.action"><img src="/images/bamboo_header_logo.gif" alt="Atlassian Bamboo" height="36" width="118" /></a> </div> <ul id="userOptions"> <li id="loginLink"> <a id="login" href="/userlogin!default.action?os_destination=%2Fstart.action">Log in</a> </li> <li id="signupLink"> <a id="signup" href="/signupUser!default.action">Signup</a> </li> <li id="helpLink"> <a id="help" href="http://confluence.atlassian.com/display/BAMBOO">Help</a> </li> </ul> </div>  <div id="menu"> <ul> <li><a id="home" href="/start.action" title="Atlassian Bamboo" accesskey="H"> <u>H</u>ome</a></li> <li><a id="authors" href="/authors/gotoAuthorReport.action" accesskey="U">A<u>u</u>thors</a></li> <li><a id="reports" href="/reports/viewReport.action" accesskey="R"> <u>R</u>eports</a></li> </ul> </div>  </div>  <div id="bd"> <div id="content"> <h1>Header here</h1> <div class="topMarginned"> <div id='buildSummaryTabs' class='dashboardTab'> </div> <script type="text/javascript"> function initUI(){ var jtabs = new YAHOO.ext.TabPanel('buildSummaryTabs'); YAHOO.bamboo.tabPanel = jtabs; // Use setUrl for Ajax loading var tab3 = jtabs.addTab('allTab', "All Plans"); tab3.setUrl('/ajax/displayAllBuildSummaries.action', null, true); var tab4 = jtabs.addTab("currentTab", "Current Activity"); tab4.setUrl('/ajax/displayCurrentActivity.action', null, true); var handleTabChange = function(e, activePanel) { saveCookie('atlassian.bamboo.dashboard.tab.selected', activePanel.id, 365); }; jtabs.on('tabchange', handleTabChange); var selectedCookie = getCookieValue('atlassian.bamboo.dashboard.tab.selected'); if (jtabs.getTab(selectedCookie)) { jtabs.activate(selectedCookie); } else { jtabs.activate('allTab'); } } YAHOO.util.Event.onContentReady('buildSummaryTabs', initUI); </script> </div> <script type="text/javascript"> setTimeout( "window.location.reload()", 1800*1000 ); </script> <div class="clearer" ></div> </div>  </div>  </div>  <div id="ft"> <div id="footer"> <p> Powered by <a href="http://www.atlassian.com/software/bamboo/">Atlassian Bamboo</a> version 2.2.1 build 1206 - <span title="15:59:44 17 Mar 2009">17 Mar 09</span> </p> <ul> <li class="first"> <a href="https://support.atlassian.com/secure/CreateIssue.jspa?pid=10060&issuetype=1">Report a problem</a> </li> <li> <a href="http://jira.atlassian.com/secure/CreateIssue.jspa?pid=11011&issuetype=4">Request a feature</a> </li> <li> <a href="http://forums.atlassian.com/forum.jspa?forumID=103">Contact Atlassian</a> </li> <li> <a href="/viewAdministrators.action">Contact Administrators</a> </li> </ul> </div>  </div>

Read the article

Fitting an Image to Screen on Rotation iPhone / iPad ?

- by user356937

I have been playing around with one of the iPhone examples from Apple' web site (ScrollViewSuite) . I am trying to tweak it a bit so that when I rotate the the iPad the image will fit into the screen in landscape mode vertical. I have been successful in getting the image to rotate, but the image is larger than the height of the landscape screen, so the bottom is below the screen. I would like to image to scale to the height of the landscape screen. I have been playing around with various autoSizingMask attributes without success. The imageView is called "zoomView" this is the actual image which loads into a scrollView called imageScrollView. I am trying to achieve the screen to rotate and look like this.... olsonvox.com/photos/correct.png However, this is what My screen is looking like. olsonvox.com/photos/incorrect.png I would really appreciate some advice or guidance. Below is the RootViewController.m for the project. Blade # import "RootViewController.h" #define ZOOM_VIEW_TAG 100 #define ZOOM_STEP 1.5 #define THUMB_HEIGHT 150 #define THUMB_V_PADDING 25 #define THUMB_H_PADDING 25 #define CREDIT_LABEL_HEIGHT 25 #define AUTOSCROLL_THRESHOLD 30 @interface RootViewController (ViewHandlingMethods) - (void)toggleThumbView; - (void)pickImageNamed:(NSString *)name; - (NSArray *)imageNames; - (void)createThumbScrollViewIfNecessary; - (void)createSlideUpViewIfNecessary; @end @interface RootViewController (AutoscrollingMethods) - (void)maybeAutoscrollForThumb:(ThumbImageView *)thumb; - (void)autoscrollTimerFired:(NSTimer *)timer; - (void)legalizeAutoscrollDistance; - (float)autoscrollDistanceForProximityToEdge:(float)proximity; @end @interface RootViewController (UtilityMethods) - (CGRect)zoomRectForScale:(float)scale withCenter:(CGPoint)center; @end @implementation RootViewController - (void)loadView { [super loadView]; imageScrollView = [[UIScrollView alloc] initWithFrame:[[self view]bounds]]; // this code makes the image resize to the width and height properly. imageScrollView.autoresizingMask = UIViewAutoresizingFlexibleHeight | UIViewAutoresizingFlexibleLeftMargin | UIViewAutoresizingFlexibleRightMargin| UIViewAutoresizingFlexibleBottomMargin| UIViewAutoresizingFlexibleBottomMargin; // TRY SETTNG CENTER HERE SOMEHOW>.... [imageScrollView setBackgroundColor:[UIColor blackColor]]; [imageScrollView setDelegate:self]; [imageScrollView setBouncesZoom:YES]; [[self view] addSubview:imageScrollView]; [self toggleThumbView]; // intitializes with the first image. [self pickImageNamed:@"lookbook1"]; } - (void)dealloc { [imageScrollView release]; [slideUpView release]; [thumbScrollView release]; [super dealloc]; } #pragma mark UIScrollViewDelegate methods - (UIView *)viewForZoomingInScrollView:(UIScrollView *)scrollView { UIView *view = nil; if (scrollView == imageScrollView) { view = [imageScrollView viewWithTag:ZOOM_VIEW_TAG]; } return view; } /************************************** NOTE **************************************/ /* The following delegate method works around a known bug in zoomToRect:animated: */ /* In the next release after 3.0 this workaround will no longer be necessary */ /**********************************************************************************/ - (void)scrollViewDidEndZooming:(UIScrollView *)scrollView withView:(UIView *)view atScale:(float)scale { [scrollView setZoomScale:scale+0.01 animated:NO]; [scrollView setZoomScale:scale animated:NO]; } #pragma mark TapDetectingImageViewDelegate methods - (void)tapDetectingImageView:(TapDetectingImageView *)view gotSingleTapAtPoint:(CGPoint)tapPoint { // Single tap shows or hides drawer of thumbnails. [self toggleThumbView]; } - (void)tapDetectingImageView:(TapDetectingImageView *)view gotDoubleTapAtPoint:(CGPoint)tapPoint { // double tap zooms in float newScale = [imageScrollView zoomScale] * ZOOM_STEP; CGRect zoomRect = [self zoomRectForScale:newScale withCenter:tapPoint]; [imageScrollView zoomToRect:zoomRect animated:YES]; } - (void)tapDetectingImageView:(TapDetectingImageView *)view gotTwoFingerTapAtPoint:(CGPoint)tapPoint { // two-finger tap zooms out float newScale = [imageScrollView zoomScale] / ZOOM_STEP; CGRect zoomRect = [self zoomRectForScale:newScale withCenter:tapPoint]; [imageScrollView zoomToRect:zoomRect animated:YES]; } #pragma mark ThumbImageViewDelegate methods - (void)thumbImageViewWasTapped:(ThumbImageView *)tiv { [self pickImageNamed:[tiv imageName]]; [self toggleThumbView]; } - (void)thumbImageViewStartedTracking:(ThumbImageView *)tiv { [thumbScrollView bringSubviewToFront:tiv]; } // CONTROLS DRAGGING AND DROPPING THUMBNAILS... - (void)thumbImageViewMoved:(ThumbImageView *)draggingThumb { // check if we've moved close enough to an edge to autoscroll, or far enough away to stop autoscrolling [self maybeAutoscrollForThumb:draggingThumb]; /* The rest of this method handles the reordering of thumbnails in the thumbScrollView. See */ /* ThumbImageView.h and ThumbImageView.m for more information about how this works. */ // we'll reorder only if the thumb is overlapping the scroll view if (CGRectIntersectsRect([draggingThumb frame], [thumbScrollView bounds])) { BOOL draggingRight = [draggingThumb frame].origin.x > [draggingThumb home].origin.x ? YES : NO; /* we're going to shift over all the thumbs who live between the home of the moving thumb */ /* and the current touch location. A thumb counts as living in this area if the midpoint */ /* of its home is contained in the area. */ NSMutableArray *thumbsToShift = [[NSMutableArray alloc] init]; // get the touch location in the coordinate system of the scroll view CGPoint touchLocation = [draggingThumb convertPoint:[draggingThumb touchLocation] toView:thumbScrollView]; // calculate minimum and maximum boundaries of the affected area float minX = draggingRight ? CGRectGetMaxX([draggingThumb home]) : touchLocation.x; float maxX = draggingRight ? touchLocation.x : CGRectGetMinX([draggingThumb home]); // iterate through thumbnails and see which ones need to move over for (ThumbImageView *thumb in [thumbScrollView subviews]) { // skip the thumb being dragged if (thumb == draggingThumb) continue; // skip non-thumb subviews of the scroll view (such as the scroll indicators) if (! [thumb isMemberOfClass:[ThumbImageView class]]) continue; float thumbMidpoint = CGRectGetMidX([thumb home]); if (thumbMidpoint >= minX && thumbMidpoint <= maxX) { [thumbsToShift addObject:thumb]; } } // shift over the other thumbs to make room for the dragging thumb. (if we're dragging right, they shift to the left) float otherThumbShift = ([draggingThumb home].size.width + THUMB_H_PADDING) * (draggingRight ? -1 : 1); // as we shift over the other thumbs, we'll calculate how much the dragging thumb's home is going to move float draggingThumbShift = 0.0; // send each of the shifting thumbs to its new home for (ThumbImageView *otherThumb in thumbsToShift) { CGRect home = [otherThumb home]; home.origin.x += otherThumbShift; [otherThumb setHome:home]; [otherThumb goHome]; draggingThumbShift += ([otherThumb frame].size.width + THUMB_H_PADDING) * (draggingRight ? 1 : -1); } // change the home of the dragging thumb, but don't send it there because it's still being dragged CGRect home = [draggingThumb home]; home.origin.x += draggingThumbShift; [draggingThumb setHome:home]; } } - (void)thumbImageViewStoppedTracking:(ThumbImageView *)tiv { // if the user lets go of the thumb image view, stop autoscrolling [autoscrollTimer invalidate]; autoscrollTimer = nil; } #pragma mark Autoscrolling methods - (void)maybeAutoscrollForThumb:(ThumbImageView *)thumb { autoscrollDistance = 0; // only autoscroll if the thumb is overlapping the thumbScrollView if (CGRectIntersectsRect([thumb frame], [thumbScrollView bounds])) { CGPoint touchLocation = [thumb convertPoint:[thumb touchLocation] toView:thumbScrollView]; float distanceFromLeftEdge = touchLocation.x - CGRectGetMinX([thumbScrollView bounds]); float distanceFromRightEdge = CGRectGetMaxX([thumbScrollView bounds]) - touchLocation.x; if (distanceFromLeftEdge < AUTOSCROLL_THRESHOLD) { autoscrollDistance = [self autoscrollDistanceForProximityToEdge:distanceFromLeftEdge] * -1; // if scrolling left, distance is negative } else if (distanceFromRightEdge < AUTOSCROLL_THRESHOLD) { autoscrollDistance = [self autoscrollDistanceForProximityToEdge:distanceFromRightEdge]; } } // if no autoscrolling, stop and clear timer if (autoscrollDistance == 0) { [autoscrollTimer invalidate]; autoscrollTimer = nil; } // otherwise create and start timer (if we don't already have a timer going) else if (autoscrollTimer == nil) { autoscrollTimer = [NSTimer scheduledTimerWithTimeInterval:(1.0 / 60.0) target:self selector:@selector(autoscrollTimerFired:) userInfo:thumb repeats:YES]; } } - (float)autoscrollDistanceForProximityToEdge:(float)proximity { // the scroll distance grows as the proximity to the edge decreases, so that moving the thumb // further over results in faster scrolling. return ceilf((AUTOSCROLL_THRESHOLD - proximity) / 5.0); } - (void)legalizeAutoscrollDistance { // makes sure the autoscroll distance won't result in scrolling past the content of the scroll view float minimumLegalDistance = [thumbScrollView contentOffset].x * -1; float maximumLegalDistance = [thumbScrollView contentSize].width - ([thumbScrollView frame].size.width + [thumbScrollView contentOffset].x); autoscrollDistance = MAX(autoscrollDistance, minimumLegalDistance); autoscrollDistance = MIN(autoscrollDistance, maximumLegalDistance); } - (void)autoscrollTimerFired:(NSTimer*)timer { [self legalizeAutoscrollDistance]; // autoscroll by changing content offset CGPoint contentOffset = [thumbScrollView contentOffset]; contentOffset.x += autoscrollDistance; [thumbScrollView setContentOffset:contentOffset]; // adjust thumb position so it appears to stay still ThumbImageView *thumb = (ThumbImageView *)[timer userInfo]; [thumb moveByOffset:CGPointMake(autoscrollDistance, 0)]; } #pragma mark View handling methods - (void)toggleThumbView { [self createSlideUpViewIfNecessary]; // no-op if slideUpView has already been created CGRect frame = [slideUpView frame]; if (thumbViewShowing) { frame.origin.y = 0; } else { frame.origin.y = -225; } [UIView beginAnimations:nil context:nil]; [UIView setAnimationDuration:0.3]; [slideUpView setFrame:frame]; [UIView commitAnimations]; thumbViewShowing = !thumbViewShowing; } - (void)pickImageNamed:(NSString *)name { // first remove previous image view, if any [[imageScrollView viewWithTag:ZOOM_VIEW_TAG] removeFromSuperview]; UIImage *image = [UIImage imageNamed:[NSString stringWithFormat:@"%@.jpg", name]]; TapDetectingImageView *zoomView = [[TapDetectingImageView alloc] initWithImage:image]; zoomView.autoresizingMask = UIViewAutoresizingFlexibleWidth ; [zoomView setDelegate:self]; [zoomView setTag:ZOOM_VIEW_TAG]; [imageScrollView addSubview:zoomView]; [imageScrollView setContentSize:[zoomView frame].size]; [zoomView release]; // choose minimum scale so image width fits screen float minScale = [imageScrollView frame].size.width / [zoomView frame].size.width; [imageScrollView setMinimumZoomScale:minScale]; [imageScrollView setZoomScale:minScale]; [imageScrollView setContentOffset:CGPointZero]; } - (NSArray *)imageNames { // the filenames are stored in a plist in the app bundle, so create array by reading this plist NSString *path = [[NSBundle mainBundle] pathForResource:@"Images" ofType:@"plist"]; NSData *plistData = [NSData dataWithContentsOfFile:path]; NSString *error; NSPropertyListFormat format; NSArray *imageNames = [NSPropertyListSerialization propertyListFromData:plistData mutabilityOption:NSPropertyListImmutable format:&format errorDescription:&error]; if (!imageNames) { NSLog(@"Failed to read image names. Error: %@", error); [error release]; } return imageNames; } - (void)createSlideUpViewIfNecessary { if (!slideUpView) { [self createThumbScrollViewIfNecessary]; CGRect bounds = [[self view] bounds]; float thumbHeight = [thumbScrollView frame].size.height; float labelHeight = CREDIT_LABEL_HEIGHT; // create label giving credit for images UILabel *creditLabel = [[UILabel alloc] initWithFrame:CGRectMake(0, thumbHeight, bounds.size.width, labelHeight)]; [creditLabel setBackgroundColor:[UIColor clearColor]]; [creditLabel setTextColor:[UIColor whiteColor]]; // [creditLabel setFont:[UIFont fontWithName:@"Helvetica" size:16]]; // [creditLabel setText:@"SAMPLE TEXT"]; [creditLabel setTextAlignment:UITextAlignmentCenter]; // create container view that will hold scroll view and label CGRect frame = CGRectMake(0.0, -225.00, bounds.size.width+256, thumbHeight + labelHeight); slideUpView.autoresizingMask = UIViewAutoresizingFlexibleWidth | UIViewAutoresizingFlexibleTopMargin; slideUpView = [[UIView alloc] initWithFrame:frame]; [slideUpView setBackgroundColor:[UIColor blackColor]]; [slideUpView setOpaque:NO]; [slideUpView setAlpha:.75]; [[self view] addSubview:slideUpView]; // add subviews to container view [slideUpView addSubview:thumbScrollView]; [slideUpView addSubview:creditLabel]; [creditLabel release]; } } - (void)createThumbScrollViewIfNecessary { if (!thumbScrollView) { float scrollViewHeight = THUMB_HEIGHT + THUMB_V_PADDING; float scrollViewWidth = [[self view] bounds].size.width; thumbScrollView = [[UIScrollView alloc] initWithFrame:CGRectMake(0, 0, scrollViewWidth, scrollViewHeight)]; [thumbScrollView setCanCancelContentTouches:NO]; [thumbScrollView setClipsToBounds:NO]; // now place all the thumb views as subviews of the scroll view // and in the course of doing so calculate the content width float xPosition = THUMB_H_PADDING; for (NSString *name in [self imageNames]) { UIImage *thumbImage = [UIImage imageNamed:[NSString stringWithFormat:@"%@_thumb.jpg", name]]; if (thumbImage) { ThumbImageView *thumbView = [[ThumbImageView alloc] initWithImage:thumbImage]; [thumbView setDelegate:self]; [thumbView setImageName:name]; CGRect frame = [thumbView frame]; frame.origin.y = THUMB_V_PADDING; frame.origin.x = xPosition; [thumbView setFrame:frame]; [thumbView setHome:frame]; [thumbScrollView addSubview:thumbView]; [thumbView release]; xPosition += (frame.size.width + THUMB_H_PADDING); } } [thumbScrollView setContentSize:CGSizeMake(xPosition, scrollViewHeight)]; } } #pragma mark Utility methods - (CGRect)zoomRectForScale:(float)scale withCenter:(CGPoint)center { CGRect zoomRect; // the zoom rect is in the content view's coordinates. // At a zoom scale of 1.0, it would be the size of the imageScrollView's bounds. // As the zoom scale decreases, so more content is visible, the size of the rect grows. zoomRect.size.height = [imageScrollView frame].size.height / scale; zoomRect.size.width = [imageScrollView frame].size.width / scale; // choose an origin so as to get the right center. zoomRect.origin.x = center.x - (zoomRect.size.width / 2.0); zoomRect.origin.y = center.y - (zoomRect.size.height / 2.0); return zoomRect; } #pragma mark - #pragma mark Rotation support // Ensure that the view controller supports rotation and that the split view can therefore show in both portrait and landscape. - (BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)interfaceOrientation { return YES; } @end

Read the article

Sonar Analysis crashing with default configuration in Maven

- by Robert Mandeville

I'm starting to experiment with Sonar, and having trouble. I'm running everything on the same Red Hat Linux server, against Java 1.6.10. I launched the server with "bin/linux-x86-32" (the JVM is 32-bit). The sonar.log shows no SEVERE or ERROR and one WARNING, that I'm using the default Derby database (I'll fix that once I get things running at all). I am trying to build a Maven project that builds a JAR. I made no Sonar-specific changes (other than one described below). I can run "mvn clean install" with no problem. However, if I then run "mvn -e sonar:sonar", I get the stacktrace listed below. The server logs no events. I added the dependency "commons-pool:commons-pool:20030825.183949, but to no avail. Any idea as to what I'm doing wrong? [INFO] Error stacktraces are turned on. [INFO] Scanning for projects... [INFO] [INFO] ------------------------------------------------------------------------ [INFO] Building buildUtil 1.0 [INFO] ------------------------------------------------------------------------ [INFO] [INFO] --- sonar-maven-plugin:2.0:sonar (default-cli) @ buildUtil --- [INFO] Sonar version: 2.14 [WARN] [14:54:17.730] Derby database should be used for evaluation purpose only [INFO] [14:54:17.732] Create JDBC datasource [INFO] ------------------------------------------------------------------------ [INFO] BUILD FAILURE [INFO] ------------------------------------------------------------------------ [INFO] Total time: 2.130s [INFO] Finished at: Mon Apr 09 14:54:17 EDT 2012 [INFO] Final Memory: 8M/198M [INFO] ------------------------------------------------------------------------ [ERROR] Failed to execute goal org.codehaus.mojo:sonar-maven-plugin:2.0:sonar (default-cli) on project buildUtil: Can not execute Sonar: PicoLifecycleException: method 'public final org.sonar.core.persistence.DefaultDatabase org.sonar.core.persistence.DefaultDatabase.start()', instance 'org.sonar.batch.bootstrap.BatchDatabase@41b635, java.lang.RuntimeException: wrapper: org/apache/commons/pool/impl/GenericObjectPool: org.apache.commons.pool.impl.GenericObjectPool -> [Help 1] org.apache.maven.lifecycle.LifecycleExecutionException: Failed to execute goal org.codehaus.mojo:sonar-maven-plugin:2.0:sonar (default-cli) on project buildUtil: Can not execute Sonar at org.apache.maven.lifecycle.internal.MojoExecutor.execute(MojoExecutor.java:217) at org.apache.maven.lifecycle.internal.MojoExecutor.execute(MojoExecutor.java:153) at org.apache.maven.lifecycle.internal.MojoExecutor.execute(MojoExecutor.java:145) at org.apache.maven.lifecycle.internal.LifecycleModuleBuilder.buildProject(LifecycleModuleBuilder.java:84) at org.apache.maven.lifecycle.internal.LifecycleModuleBuilder.buildProject(LifecycleModuleBuilder.java:59) at org.apache.maven.lifecycle.internal.LifecycleStarter.singleThreadedBuild(LifecycleStarter.java:183) at org.apache.maven.lifecycle.internal.LifecycleStarter.execute(LifecycleStarter.java:161) at org.apache.maven.DefaultMaven.doExecute(DefaultMaven.java:319) at org.apache.maven.DefaultMaven.execute(DefaultMaven.java:156) at org.apache.maven.cli.MavenCli.execute(MavenCli.java:537) at org.apache.maven.cli.MavenCli.doMain(MavenCli.java:196) at org.apache.maven.cli.MavenCli.main(MavenCli.java:141) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.codehaus.plexus.classworlds.launcher.Launcher.launchEnhanced(Launcher.java:290) at org.codehaus.plexus.classworlds.launcher.Launcher.launch(Launcher.java:230) at org.codehaus.plexus.classworlds.launcher.Launcher.mainWithExitCode(Launcher.java:409) at org.codehaus.plexus.classworlds.launcher.Launcher.main(Launcher.java:352) Caused by: org.apache.maven.plugin.MojoExecutionException: Can not execute Sonar at org.codehaus.mojo.sonar.Bootstraper.executeMojo(Bootstraper.java:118) at org.codehaus.mojo.sonar.Bootstraper.start(Bootstraper.java:65) at org.codehaus.mojo.sonar.SonarMojo.execute(SonarMojo.java:90) at org.apache.maven.plugin.DefaultBuildPluginManager.executeMojo(DefaultBuildPluginManager.java:101) at org.apache.maven.lifecycle.internal.MojoExecutor.execute(MojoExecutor.java:209) ... 19 more Caused by: org.picocontainer.PicoLifecycleException: PicoLifecycleException: method 'public final org.sonar.core.persistence.DefaultDatabase org.sonar.core.persistence.DefaultDatabase.start()', instance 'org.sonar.batch.bootstrap.BatchDatabase@41b635, java.lang.RuntimeException: wrapper at org.picocontainer.monitors.NullComponentMonitor.lifecycleInvocationFailed(NullComponentMonitor.java:77) at org.picocontainer.lifecycle.ReflectionLifecycleStrategy.monitorAndThrowReflectionLifecycleException(ReflectionLifecycleStrategy.java:132) at org.picocontainer.lifecycle.ReflectionLifecycleStrategy.invokeMethod(ReflectionLifecycleStrategy.java:115) at org.picocontainer.lifecycle.ReflectionLifecycleStrategy.start(ReflectionLifecycleStrategy.java:89) at org.picocontainer.injectors.AbstractInjectionFactory$LifecycleAdapter.start(AbstractInjectionFactory.java:84) at org.picocontainer.behaviors.AbstractBehavior.start(AbstractBehavior.java:169) at org.picocontainer.behaviors.Stored$RealComponentLifecycle.start(Stored.java:132) at org.picocontainer.behaviors.Stored.start(Stored.java:110) at org.picocontainer.DefaultPicoContainer.potentiallyStartAdapter(DefaultPicoContainer.java:1009) at org.picocontainer.DefaultPicoContainer.startAdapters(DefaultPicoContainer.java:1002) at org.picocontainer.DefaultPicoContainer.start(DefaultPicoContainer.java:760) at org.sonar.api.platform.ComponentContainer.startComponents(ComponentContainer.java:70) at org.sonar.batch.bootstrap.Module.start(Module.java:82) at org.sonar.batch.bootstrapper.Batch.startBatch(Batch.java:71) at org.sonar.batch.bootstrapper.Batch.execute(Batch.java:58) at org.sonar.maven3.SonarMojo.execute(SonarMojo.java:143) at org.codehaus.mojo.sonar.Bootstraper.executeMojo(Bootstraper.java:113) ... 23 more Caused by: java.lang.RuntimeException: wrapper at org.picocontainer.lifecycle.ReflectionLifecycleStrategy.monitorAndThrowReflectionLifecycleException(ReflectionLifecycleStrategy.java:130) ... 38 more Caused by: java.lang.NoClassDefFoundError: org/apache/commons/pool/impl/GenericObjectPool at org.apache.commons.dbcp.BasicDataSourceFactory.createDataSource(BasicDataSourceFactory.java:152) at org.sonar.core.persistence.DefaultDatabase.initDatasource(DefaultDatabase.java:114) at org.sonar.core.persistence.DefaultDatabase.start(DefaultDatabase.java:60) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.picocontainer.lifecycle.ReflectionLifecycleStrategy.invokeMethod(ReflectionLifecycleStrategy.java:110) ... 37 more Caused by: java.lang.ClassNotFoundException: org.apache.commons.pool.impl.GenericObjectPool at org.codehaus.plexus.classworlds.strategy.SelfFirstStrategy.loadClass(SelfFirstStrategy.java:50) at org.codehaus.plexus.classworlds.realm.ClassRealm.loadClass(ClassRealm.java:244) at org.codehaus.plexus.classworlds.realm.ClassRealm.loadClass(ClassRealm.java:230) at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320) ... 45 more [ERROR] [ERROR] Re-run Maven using the -X switch to enable full debug logging. [ERROR] [ERROR] For more information about the errors and possible solutions, please read the following articles: [ERROR] [Help 1] http://cwiki.apache.org/confluence/display/MAVEN/MojoExecutionException The POM I'm using is: <?xml version="1.0" encoding="UTF-8"?> <project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd"> <modelVersion>4.0.0</modelVersion> <groupId>com.phoenix.build</groupId> <artifactId>buildUtil</artifactId> <version>1.0</version> <properties> <project.build.sourceEncoding>UTF-8</project.build.sourceEncoding> </properties> <build> <sourceDirectory>src/main/java</sourceDirectory> <testSourceDirectory>src/test/java</testSourceDirectory> <plugins> <plugin> <artifactId>maven-compiler-plugin</artifactId> <version>2.3.2</version> <configuration> <source>1.6</source> <target>1.6</target> </configuration> </plugin> <plugin> <groupId>org.apache.maven.plugins</groupId> <artifactId>maven-surefire-plugin</artifactId> <version>2.7.2</version> <configuration> <excludes> <exclude>**/*integrationTest.java</exclude> </excludes> </configuration> <executions> <execution> <id>integration-tests</id> <phase>integration-test</phase> <goals> <goal>test</goal> </goals> <configuration> <skip>false</skip> <excludes> <exclude>none</exclude> </excludes> <includes> <include>**/*integrationTest.java</include> </includes> </configuration> </execution> </executions> </plugin> <plugin> <groupId>org.apache.maven.plugins</groupId> <artifactId>maven-jar-plugin</artifactId> <version>2.2</version> <executions> <execution> <goals> <goal>test-jar</goal> </goals> </execution> </executions> </plugin> </plugins> </build> <dependencies> <dependency> <groupId>commons-cli</groupId> <artifactId>commons-cli</artifactId> <version>1.2</version> <type>jar</type> <optional>false</optional> </dependency> <dependency> <groupId>jaxen</groupId> <artifactId>jaxen</artifactId> <version>1.1.1</version> <type>jar</type> <optional>false</optional> </dependency> <dependency> <groupId>dom4j</groupId> <artifactId>dom4j</artifactId> <version>1.6.1</version> <type>jar</type> <optional>false</optional> </dependency> <dependency> <groupId>junit</groupId> <artifactId>junit</artifactId> <version>4.8.2</version> <type>jar</type> <scope>test</scope> <optional>false</optional> </dependency> <dependency> <groupId>org.apache.maven</groupId> <artifactId>maven-artifact</artifactId> <version>2.0</version> <type>jar</type> <optional>false</optional> </dependency> <dependency> <groupId>org.codehaus.plexus</groupId> <artifactId>plexus-classworlds</artifactId> <version>2.2.2</version> <type>jar</type> <optional>false</optional> </dependency> <dependency> <groupId>com.ibm.db2</groupId> <artifactId>db2jcc</artifactId> <version>9.7</version> <type>jar</type> <optional>false</optional> </dependency> <dependency> <groupId>com.ibm.db2</groupId> <artifactId>Common</artifactId> <version>9.7</version> <type>jar</type> <optional>false</optional> </dependency> <dependency> <groupId>com.ibm.db2</groupId> <artifactId>db2fs</artifactId> <version>9.7</version> <type>jar</type> <optional>false</optional> </dependency> <dependency> <groupId>com.ibm.db2</groupId> <artifactId>db2java</artifactId> <version>9.7</version> <type>zip</type> <optional>false</optional> </dependency> <dependency> <groupId>com.ibm.db2</groupId> <artifactId>db2jcc_javax</artifactId> <version>9.7</version> <type>jar</type> <optional>false</optional> </dependency> <dependency> <groupId>com.ibm.db2</groupId> <artifactId>db2jcc_license_cisuz</artifactId> <version>9.7</version> <type>jar</type> <optional>false</optional> </dependency> <dependency> <groupId>com.ibm.db2</groupId> <artifactId>db2jcc_license_cu</artifactId> <version>9.7</version> <type>jar</type> <optional>false</optional> </dependency> <dependency> <groupId>com.ibm.db2</groupId> <artifactId>db2policy</artifactId> <version>9.7</version> <type>jar</type> <optional>false</optional> </dependency> <dependency> <groupId>com.ibm.db2</groupId> <artifactId>sqlj</artifactId> <version>9.7</version> <type>zip</type> <optional>false</optional> </dependency> <dependency> <groupId>com.ibm.db2</groupId> <artifactId>db2qgjava</artifactId> <version>9.7</version> <type>jar</type> <optional>false</optional> </dependency> </dependencies>

Read the article

Secure wipe of a hard drive using WinPE.

- by Derek Meier

Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} The wiping of a hard drive is typically seen as fairly trivial. There are tons of applications out there that will do it for you. Point àClickàGlobal-Thermo Nuclear War. However, these applications are typically expensive or unreliable. Plus, if you have a laptop or lack a secondary computer to put the hard drive into – how on earth do you wipe it quickly and easily while still conforming to a 7 pass rule (this means that every possible bit on the hard drive is set to 0 and then to 1 seven times in a row)? Yes, one pass should be enough – as turning every bit from a 1 to a zero will wipe the data from existence. But, we’re dealing with tinfoil hat wearing types here people. DOD standards dictate at least 3 passes, and typically 7 is the preferred amount. I’m not going to argue about data recovery. I have been told to use 7 passes, and so I will. So say we all! Quite some time ago I used to make a BartPE XP-based boot cd for the original purpose of securely wiping data. I loved BartPE and integrated so many plugins into my builds that I could do pretty much anything directly from CD. Reset passwords, uninstall security updates, wipe drives, chkdsk, remove spyware, install Windows, etc. However, with the newer multi-core systems and new chipsets coming out from vendors, I found that BartPE was rather difficult to keep up to date. I have since switched to WinPE 3.0 (Windows Preinstallation Environment). http://technet.microsoft.com/en-us/library/cc748933(WS.10).aspx It is fairly simple to create your own CD, and I have made a few helpful scripts to easily integrate drivers and rebuild the ISO file for you. I’ll cover making your own boot CD utilizing WinPE 3.0 in a later post – I can talk about WinPE forever and need to collect my thoughts!! My wife loves talking about WinPE almost as much as talking about Doctor Who. Wait, did I say loves? Hmmmm, I may have meant loathes. The topic at hand? Right. Wiping a drive! I must have drunk too much coffee this morning. I like to use a simple batch script that calls a combination of diskpart.exe from Microsoft® and Sdelete.exe created by our friend Mark Russinovich. http://technet.microsoft.com/en-us/sysinternals/bb897443.aspx All of the following files are located within the same directory on my WinPE boot CD. Here are the contents of wipe_me.bat, script.txt and sdelete.reg. Wipe_me.bat: @echo off echo. echo I will completely wipe the local hard drives using echo 7 individual wipes. The data will NOT echo be recoverable. I will begin after you pause echo. echo Preparing to partition and format disk. Diskpart.exe /s "script.txt" REM I was annoyed by not having a completely automated script – and Sdelete wants you to accept the license agreement. So, I added a registry file to skip doing that. regedit /S sdelete.reg rem sdelete options selected are: -p (passes) -c (zero free space) -s (recurse through subdirectories, if any) -z (clean free space) [drive letter] sdelete.exe -p 7 -c -s -z c: echo. echo Pass seven complete. echo. echo Wiping complete. Pause exit script.txt: list disk select disk 0 clean create partition primary select partition 1 active format FS=NTFS LABEL="New Volume" QUICK assign letter=c exit *Notes: This script assumes one local hard drive – change the script as you see fit for your environment. The clean command will overwrite the master boot record and any hidden sector information – so be careful! sdelete.reg: Windows Registry Editor Version 5.00 [HKEY_CURRENT_USER\Software\Sysinternals\SDelete] "EulaAccepted"=dword:00000001 With a combination of WinPE, sdelete.exe and your friendly neighborhood text editor you can begin wiping drives as quickly and easily as possible! I hope this helps, I get asked this a lot in my line of work. Best of luck, Derek

Read the article

MySQL 5.5 brings in new ways to authenticate users

- by Georgi Kodinov

Ever wanted to use your server's OS for authenticating MySQL users ? Or the corporate LDAP repository ? Unfortunately options like the above are plentiful nowadays. And providing hard-coded support for protocol X or service Y is not the best possible idea. MySQL 5.5 has taken the step into the right direction by providing an infrastructure allowing one to make the server understand different authentication protocols by creating a set of simple plugins (one for the client and one for the server). So now you can easily extend MySQL to search for and authenticate users in your favorite user directory. In fact the API supplied is so versatile that we took the possibility to re-design the current "native" authentication mechanism into a built-in always-on plugin ! OK, let me give you an example: Imagine we have a bunch of users defined in your OS, e.g. we have a user joro with his respective password. And we have a MySQL instance running on the same computer. It would not be unexpected to need to let joro access and/or modify MySQL data. The first step is to define him as a MySQL user. And there's a problem right there : MySQL's CREATE USER joro@localhost IDENTIFIED BY 'joros_password' statement needs a password. And this is a password in no way related to the password that joro have set up in the OS. What's worse : if joro changes his OS password this will in no way be reflected in MySQL. So he'll need to change his MySQL password in a separate step. Not very convenient, specially when you have a lot of users. This is a laborious setup for joro's DBA as well : he'll have to disable his access in both MySQL and the OS should he decides that joro's out of the "nice" list. Now mysql 5.5 to the rescue: Imagine that the smart DBA has created a MySQL server plugin that will check if the name of the user logging in is a valid and enabled OS name and if the password supplied to the mysql client matches the OS and has called this plugin 'auth_os'. Now all that's left to do is to define joro as a MySQL user that will be authenticated externally. This is done by the following command : CREATE USER 'joro'@'localhost' IDENTIFIED WITH 'auth_os'; Now joro can login to MySQL using his current OS password. Note : joro is still a valid MySQL user, so you can grant privileges to him just like you would for all other users. What's better: you can have users that authenticate using different mechanisms in the same server. So you can e.g. safely experiment with external authentication for selected users while keeping your current user base operational. What happens under the hood when joro logs in ? The server will find out by the user definition that it needs to use a non-default authentication and will ask the client to "switch" to using the appropriate client-side plugin (if of course the client is not already using it). If the client can't do this (e.g. because it's an old client or doesn't have the necessary plugin available) the server will reject the login. Otherwise the server will let the server-side plugin decide (while possibly talking to the client side plugin and the OS user directory) if this is a valid login or not. If it is the login process will continue as usual, while if it's not the login will get rejected. There's a lot more that MySQL 5.5 can do for you than just the simple case above. Stay tuned for more advanced use cases like mapping groups of external users to a single MySQL user (so you won't have to have 1-to-1 mapping between your external user directory and your mysql user repository) or ways to control the process as a DBA. Or you can simply skip ahead and read the relevant topics from MySQL's excellent online documentation. Or take a look at the example plugins in plugin/auth. Or take a look at the test suite in mysql-test/t/plugin_auth.test. Changelog entry: http://dev.mysql.com/doc/refman/5.5/en/news-5-5-7.html Primary new sections: Pluggable authentication Proxy users Client plugin C API functions Revised sections: New PROXY privilege New proxies_priv grant table Passwords might be external New external_user and proxy_user system variables New --default-auth and --plugin-dir mysql options New MYSQL_DEFAULT_AUTH and MYSQL_PLUGIN_DIR options for mysql_options() CREATE USER has IDENTIFIED WITH clause to specify auth plugin GRANT has PROXY privilege, IDENTIFIED WITH clause to specify auth plugin The data structure for writing client plugins

Read the article

Trace File Source Adapter

The Trace File Source adapter is a useful addition to your SSIS toolbox. It allows you to read 2005 and 2008 profiler traces stored as .trc files and read them into the Data Flow. From there you can perform filtering and analysis using the power of SSIS. There is no need for a SQL Server connection this just uses the trace file. Example Usages Cache warming for SQL Server Analysis Services Reading the flight recorder Find out the longest running queries on a server Analyze statements for CPU, memory by user or some other criteria you choose Properties The Trace File Source adapter has two properties, both of which combine to control the source trace file that is read at runtime. SQL Server 2005 and SQL Server 2008 trace files are supported for both the Database Engine (SQL Server) and Analysis Services. The properties are managed by the Editor form or can be set directly from the Properties Grid in Visual Studio. Property Type Description AccessMode Enumeration This property determines how the Filename property is interpreted. The values available are: DirectInput Variable Filename String This property holds the path for trace file to load (*.trc). The value is either a full path, or the name of a variable which contains the full path to the trace file, depending on the AccessMode property. Trace Column Definition Hopefully the majority of you can skip this section entirely, but if you encounter some problems processing a trace file this may explain it and allow you to fix the problem. The component is built upon the trace management API provided by Microsoft. Unfortunately API methods that expose the schema of a trace file have known issues and are unreliable, put simply the data often differs from what was specified. To overcome these limitations the component uses some simple XML files. These files enable the trace column data types and sizing attributes to be overridden. For example SQL Server Profiler or TMO generated structures define EventClass as an integer, but the real value is a string. TraceDataColumnsSQL.xml - SQL Server Database Engine Trace Columns TraceDataColumnsAS.xml - SQL Server Analysis Services Trace Columns The files can be found in the %ProgramFiles%\Microsoft SQL Server\100\DTS\PipelineComponents folder, e.g. "C:\Program Files\Microsoft SQL Server\100\DTS\PipelineComponents\TraceDataColumnsSQL.xml" "C:\Program Files\Microsoft SQL Server\100\DTS\PipelineComponents\TraceDataColumnsAS.xml" If at runtime the component encounters a type conversion or sizing error it is most likely due to a discrepancy between the column definition as reported by the API and the actual value encountered. Whilst most common issues have already been fixed through these files we have implemented specific exception traps to direct you to the files to enable you to fix any further issues due to different usage or data scenarios that we have not tested. An example error that you can fix through these files is shown below. Buffer exception writing value to column 'Column Name'. The string value is 999 characters in length, the column is only 111. Columns can be overridden by the TraceDataColumns XML files in "C:\Program Files\Microsoft SQL Server\100\DTS\PipelineComponents\TraceDataColumnsAS.xml". Installation The component is provided as an MSI file which you can download and run to install it. This simply places the files on disk in the correct locations and also installs the assemblies in the Global Assembly Cache as per Microsoft’s recommendations. You may need to restart the SQL Server Integration Services service, as this caches information about what components are installed, as well as restarting any open instances of Business Intelligence Development Studio (BIDS) / Visual Studio that you may be using to build your SSIS packages. Finally you will have to add the transformation to the Visual Studio toolbox manually. Right-click the toolbox, and select Choose Items.... Select the SSIS Data Flow Items tab, and then check the Trace File Source transformation in the Choose Toolbox Items window. This process has been described in detail in the related FAQ entry for How do I install a task or transform component? We recommend you follow best practice and apply the current Microsoft SQL Server Service pack to your SQL Server servers and workstations. Please note that the Microsoft Trace classes used in the component are not supported on 64-bit platforms. To use the Trace File Source on a 64-bit host you need to ensure you have the 32-bit (x86) tools available, and the way you execute your package is setup to use them, please see the help topic 64-bit Considerations for Integration Services for more details. Downloads Trace Sources for SQL Server 2005 -- Trace Sources for SQL Server 2008 Version History SQL Server 2008 Version 2.0.0.382 - SQL Sever 2008 public release. (9 Apr 2009) SQL Server 2005 Version 1.0.0.321 - SQL Server 2005 public release. (18 Nov 2008) -- Screenshots

Read the article

How to Access a Windows Desktop From Your Tablet or Phone

- by Chris Hoffman

iPads and Android tablets can’t run Windows apps locally, but they can access a Windows desktops remotely — even with a physical keyboard. In a pinch, the same tricks can be used to access a Windows desktop from a smartphone. Microsoft recently launched their own official Remote Desktop app for iOS and Android devices. Microsoft’s official apps are primarily useful for businesses — if you’re a typical home user, you’ll want to use a different remote desktop solution. Microsoft’s Remote Desktop App Microsoft now offers official Remote Desktop apps for iPad and iPhone as well as Android tablets and smartphones. The apps use Microsoft’s RDP protocol to connect to remote Windows systems. They’re essentially just new clients for the Remote Desktop feature that has been included in Windows for more than a decade. There are big problems with these apps if you’re an average home user. Microsoft’s Remote Desktop server is not available on standard or Home versions of Windows, only Professional and Enterprise editions. If you do have the appropriate edition of Windows, you’ll have to set up port-forwarding and a dynamic DNS service if you want to access your Windows desktop from outside your local network. You could also set up a VPN — either way you’ll need to do some footwork. This app is a gift to businesses who are already using Remote Desktop and enthusiasts who have the more expensive versions of Windows and don’t mind the configuration process. To set this up, follow our guide to setting up Remote Desktop for Internet access and connect using the Remote Desktop app instead of traditional Remote Desktop clients. TeamViewer If you have the standard edition of Windows or you just don’t want to mess around with port-forwarding and dynamic DNS configuration, you’ll want to skip Remote Desktop and use something else. We like TeamViewer for this. Just as it’s a great way to remotely troubleshoot your relatives’ computers, it’s also a great way to remotely access your own computer. It doesn’t have the same limitations Microsoft’s Remote Desktop system has — it’s completely free for personal use, runs on any edition of Windows, and is easy to set up. There’s no messing around with port-forwarding or dynamic DNS configuration. To get started, just download and run the TeamViewer program on your computer. You can get started with it immediately, but you’ll want to set up unattended access to connect remotely without using the codes displayed on your screen. To connect, just install the TeamViewer mobile app and log in with the details the TeamViewer window displays. TeamViewer also offers software that runs on Mac and Linux, so you can remote-control other types of computers from your tablet. Other Options Microsoft’s Remote Desktop app and TeamViewer aren’t the only options, of course. There are a variety of different apps and services built for this. Splashtop is another fairly popular remote desktop solution that some people report as being faster. Unfortunately, it’s not entirely free — the iPad and iPhone app costs $20 at regular price. To use it over the Internet, you’ll have to purchase an additional “Anywhere Access Pack.” If you’re frustrated with TeamViewer’s speed and you don’t mind spending money, you may want to try Splashtop instead. As always, you could use any VNC server along with a VNC client app. VNC is the do-it-yourself solution — it’s an open protocol. Unlike Microsoft’s RDP protocol, you can install a VNC server of your own, configure it how you like, and use any mobile VNC client app. This is more flexible because you can install a VNC server on any edition of Windows or even non-Windows operating systems, but it otherwise has all the same issues — you have to worry about port-forwarding, setting up dynamic DNS, and securing your VNC server. Keep an eye on Chrome Remote Desktop. Chrome already offers a built-in remote desktop feature that allows you to remotely control your PC from another Windows, Mac, Linux, or Chrome OS device. Google is rumored to be building an Android app for Chrome Remote Desktop, which would allow you to easily access a computer running Chrome from Android tablets. Google’s solution is much more user-friendly for average people than Microsoft’s Remote Desktop solution, which is clearly geared towards businesses. Chrome Remote Desktop just requires signing in with a Google account. Remote desktop solutions like Microsoft’s Remote Desktop app and TeamViewer are also available for Windows tablets. On Windows RT devices like the Surface RT and Surface 2, they allow you to use the full Windows desktop that’s unavailable on your tablet.

Read the article

FAT Volume and CE

- by Kate Moss' Open Space

Whenever we format a disk volume, it is a good idea to name the label so it will be easier to categorize. To label a volume, we can use LABEL command or UI depends on your preference. Windows CE does provide FAT driver and support various format (FAT12, FAT16,FAT32, ExFAT and TFAT - transaction-safe FAT) and many feature to let you scan and even defrag the volume but not labeling. At any time you format a volume in CE and then mount it on PC, the label is always empty! Of course, you can always label the volume on PC, even it is formatted in CE. So looks like CE does not care about the volume label at all, neither report the label to OS nor changing the label on FAT.So how can we set the volume label in CE? To Answer this question, we need to know how does FAT stores the volume label. Here are some on-line resources are handy for parsing FAT. http://en.wikipedia.org/wiki/File_Allocation_Table http://www.pjrc.com/tech/8051/ide/fat32.html http://www.microsoft.com/whdc/system/platform/firmware/fatgen.mspx You can refer to PUBLIC\COMMON\OAK\DRIVERS\FSD\FATUTIL\MAIN\bootsec.h and dosbpb.h or the above links for the fields we discuss here. The first sector of a FAT Volume (it is not necessary to be the first sector of a disk.) is a FAT boot sector and BPB (BIOS Parameter Block). And at offset 43, bgbsVolumeLabel (or bsVolumeLabel on FAT16) is for storing the volume lable, but note in the spec also indicates "FAT file system drivers should make sure that they update this field when the volume label file in the root directory has its name changed or created.". So we can't just simply update the bgbsVolumeLabel but also need to create a volume lable file in root directory. The volume lable file is not a real file but just a file entry in root directory with zero file lenth and a very special file attribute, ATTR_VOLUME_ID. (defined in public\common\oak\drivers\fsd\fatutil\MAIN\fatutilp.h) Locating and accessing bootsector is quite straight forward, as long as we know the starting sector of a FAT volume, that's it. But where is the root directory? The layout of a typical FAT is like this Boot sector (Volume ID in the figure) followed by Reserved Sectors (1 on FAT12/16 and 32 on FAT32), then FAT chain table(s) (can be 1 or 2), after that is the root directory (FAT12/16 and not shows in the figure) then begining of the File and Directories. In FAT12/16, the root directory is placed right after FAT so it is not hard to caculate the offset in the volume. But in FAT32, this rule is no longer true: the first cluster of the root directory is determined by BGBPB_RootDirStrtClus (or offset 44 in boot sector). Although this field is usually 0x00000002 (it is how CE initial the root directory after formating a volume. Note we should never assume it is always true) which means the first cluster contains data but not like the root directory is contiguous in FAT12/16, it is just like a regular file can be fragmented. So we need to access the root directory (of FAT32) hopping one cluster to another by traversing FAT table. Let's trace the code now. Although the source of FAT driver is not available in CE Shared Source program, but the formatter, Fatutil.dll, is available in public\common\oak\drivers\fsd\fatutil\MAIN\formatdisk.cpp. Be aware the public code only provides formatter for FAT12/16/32 for ExFAT it is still not available. FormatVolumeInternal is the main worker function. With the knowledge here, you should be able the trace the code easily. But I would like to discuss the following code pieces dwReservedSectors = (fo.dwFatVersion == 32) ? 32 : 1; dwRootEntries = (fo.dwFatVersion == 32) ? 0 : fo.dwRootEntries; Note the dwReservedSectors is 32 in FAT32 and 1 in FAT12/16. Root Entries is another different mentioned in previous paragraph, 0 for FAT32 (dynamic allocated) and fixed size (usually 512, defined in DEFAULT_ROOT_ENTRIES in public\common\sdk\inc\fatutil.h) And then here memset(pBootSec->bsVolumeLabel, 0x20, sizeof(pBootSec->bsVolumeLabel)); It sets the Volume Label as empty string. Now let's carry on to the next section - write the root directory. if (fo.dwFatVersion == 32) { if (!(fo.dwFlags & FATUTIL_FORMAT_TFAT)) { dwRootSectors = dwSectorsPerCluster; } else { DIRENTRY dirEntry; DWORD offset; int iVolumeNo; memset(pbBlock, 0, pdi->di_bytes_per_sect); memset(&dirEntry, 0, sizeof(DIRENTRY)); dirEntry.de_attr = ATTR_VOLUME_ID; // the first one is volume label memcpy(dirEntry.de_name, "TFAT ", sizeof (dirEntry.de_name)); memcpy(pbBlock, &dirEntry, sizeof(dirEntry)); ... // Skip the next step of zeroing out clusters dwCurrentSec += dwSectorsPerCluster; dwRootSectors = 0; } } // Each new root directory sector needs to be zeroed. memset(pbBlock, 0, cbSizeBlk); iRootSec=0; while ( iRootSec < dwRootSectors) { Basically, the code zero out the each entry in root directory depends on dwRootSectors. In FAT12/16, the dwRootSectors is calculated as the sectors we need for the root entries (512 for most of the case) and in FAT32 it just zero out the one cluster. Please note that, if it is a TFAT volume, it initialize the root directory with special volume label entries for some special purpose. Despite to its unusual initialization process for TFAT, it does provide a example for how to create a volume entry. With some minor modification, we can assign the volume label in FAT formatter and also remember to sync the volume label with bsVolumeLabel or bgbsVolumeLabel in boot sector.

Read the article

How to Convert a PFX Certificate into a JKS Certificate to configure it on WebLogic

- by adejuanc

To convert a pfx cert file to a jks file, please follow these instructions: 1. Set up the environment for the domain, by executing the setDomainEnv.sh script, typically located at $DOMAIN_HOME/bin. $ . ./setDomainEnv.sh 2. Use OpenSSL to check the pfx certificate's content. $ openssl pkcs12 -in <certificate.pfx> -out KEYSTORE.pem -nodesAt this point, a password for the pfx file will be requested. Expected output: $ openssl pkcs12 -in <certificate.pfx> -out KEYSTORE.pem -nodesEnter Import Password:MAC verified OK3. Open KEYSTORE.pem file, from step 2. This should look similar to this:You will find three certificates on it and the private key: Bag Attributes Microsoft Local Key set: <No Values> localKeyID: 01 00 00 00 friendlyName: le-36c42c6e-ec49-413c-891e-591f7e3dd306 Microsoft CSP Name: Microsoft RSA SChannel Cryptographic ProviderKey Attributes X509v3 Key Usage: 10-----BEGIN RSA PRIVATE KEY-----MIIEpQIBAAKCAQEAtPwoO3eOwSyOapzZgcDnQOH27cOaaejHtNh921Pd+U4N+dlm...EDITING...R5rsB00Yk1/2W9UqD9Nn7cDuMdilS8g9CUqnnSlDkSG0AX67auKUAcI=-----END RSA PRIVATE KEY-----Bag Attributes localKeyID: 01 00 00 00 friendlyName: *.something.comsubject=/serialNumber=sj6QjpTjKcpQGZ9QqWO-pFvsakS1t8MV/C=US/ST=Missouri/L=CHESTERFIELD/O=Oracle_Corp, Inc./OU=Oracle/CN=*.something.comissuer=/C=US/O=GeoTrust, Inc./CN=GeoTrust SSL CA-----BEGIN CERTIFICATE-----MIIErzCCA5egAwIBAgIDAIH6MA0GCSqGSIb3DQEBBQUAMEAxCzAJBgNVBAYTAlVT...EDITING...wA5JxaU55teoWkuiAaYRQpuLepJfzw+qMk5i5FpMRbVMMfkcBusGtdW5OrAoYDL94rgR-----END CERTIFICATE-----Bag Attributes friendlyName: GeoTrust Global CAsubject=/C=US/O=GeoTrust Inc./CN=GeoTrust Global CAissuer=/C=US/O=GeoTrust Inc./CN=GeoTrust Global CA-----BEGIN CERTIFICATE-----MIIDVDCCAjygAwIBAgIDAjRWMA0GCSqGSIb3DQEBBQUAMEIxCzAJBgNVBAYTAlVT...EDITING...5fEWCRE11azbJHFwLJhWC9kXtNHjUStedejV0NxPNO3CBWaAocvmMw==-----END CERTIFICATE-----Bag Attributes: <Empty Attributes>subject=/C=US/O=GeoTrust, Inc./CN=GeoTrust SSL CAissuer=/C=US/O=GeoTrust Inc./CN=GeoTrust Global CA-----BEGIN CERTIFICATE-----MIID2TCCAsGgAwIBAgIDAjbQMA0GCSqGSIb3DQEBBQUAMEIxCzAJBgNVBAYTAlVT...EDITING...TpnKXKBuervdo5AaRTPvvz7SBMS24CqFZUE+ENQ=-----END CERTIFICATE-----4. Identify and store contents from KEYSTORE.pem certificate, to proceed and create jks files:At this point, you will find three certificates on KEYSTORE.pem and the private key. 4.1 Private Key.To identify the private key, look for the following headings: -----BEGIN RSA PRIVATE KEY----------END RSA PRIVATE KEY-----Both above mentioned tags will be surrounded the private key. Go ahead and save the content of it into a file called: my_key_pk.pem. This has to include the headings. Expected file: -----BEGIN RSA PRIVATE KEY-----MIIEpQIBAAKCAQEAtPwoO3eOwSyOapzZgcDnQOH27cOaaejHtNh921Pd+U4N+dlm...EDIT...Y4ZrW12PRa9/EOBGTG5teKAEada/K4yKReTyQQAGq6j5RjErmuuKkKgPGMSCjvMSR5rsB00Yk1/2W9UqD9Nn7cDuMdilS8g9CUqnnSlDkSG0AX67auKUAcI=-----END RSA PRIVATE KEY-----4.2 Root Certificate.To identify the Root Certificate, look for the following headings: subject=/C=US/O=GeoTrust Inc./CN=GeoTrust Global CA issuer=/C=US/O=GeoTrust Inc./CN=GeoTrust Global CA Subject and issuer must be the same. Go ahead and save the content of it into a file called: my_key_root.pem. Include all the content from BEGIN CERTIFICATE TO END CERTIFICATE, both included.4.3 Intermediate Certificate.To identify an Intermediate Certificate, look for the following heading: subject=/C=US/O=GeoTrust, Inc./CN=GeoTrust SSL CAissuer=/C=US/O=GeoTrust Inc./CN=GeoTrust Global CA Subject and issuer are different only on the CN. Go ahead and save the content of it into a file called: my_key_intermediate.pem. Include all the content from BEGIN CERTIFICATE TO END CERTIFICATE, both included. NOTE: This certificate is optional and there are some cases where it'll not be present. If this is the case, go ahead and skip this step. In any other case, this needs to be added to the identity keystore jks file. 4.4 Server Certificate. To identify a Server Certificate, look for the following heading: friendlyName: some.thing.comsubject=/serialNumber=sj6QjpTjKcpQGZ9QqWO-pFvsakS1t8MV/C=US/ST=Missouri/L=CHESTERFIELD/O=Oracle_Corp, Inc./OU=Oracle/CN=some.thing.com A server certificate includes a heading called Friendly Name. Go ahead and save the content of it into a file called: my_key_crt.pem. Include all the content from BEGIN CERTIFICATE TO END CERTIFICATE, both included.5. Create a Trust Keystore and import the Root certificate into it. $ keytool -import -trustcacerts -file my_key_root.pem -alias my_key_root -keystore my_key_trust.jks -storepass <store_pass> -keypass <key_pass>Expected Output: Certificate already exists in system-wide CA keystore under alias <geotrustglobalca> Do you still want to add it to your own keystore? [no]: yes Certificate was added to keystore6. Generate an Identity Keystore and import Server into it. $java utils.ImportPrivateKey -keystore my_key_identity.jks -storepass <store_pass> -storetype JKS -keypass <key_pass> -alias server_identity -certfile my_key_crt.pem -keyfile my_key_pk.pem -keyfilepass <pfx_password> With these instructions, two jks files will be produced: my_key_identity.jks my_key_trust.jks With both files, the next step is to configure Custom Identity and Custom Trust on WebLogic Server.

Read the article

Using the Static Code Analysis feature of Visual Studio (Premium/Ultimate) to find memory leakage problems

- by terje

Memory for managed code is handled by the garbage collector, but if you use any kind of unmanaged code, like native resources of any kind, open files, streams and window handles, your application may leak memory if these are not properly handled. To handle such resources the classes that own these in your application should implement the IDisposable interface, and preferably implement it according to the pattern described for that interface. When you suspect a memory leak, the immediate impulse would be to start up a memory profiler and start digging into that. However, before you follow that impulse, do a Static Code Analysis run with a ruleset tuned to finding possible memory leaks in your code. If you get any warnings from this, fix them before you go on with the profiling. How to use a ruleset In Visual Studio 2010 (Premium and Ultimate editions) you can define your own rulesets containing a list of Static Code Analysis checks. I have defined the memory checks as shown in the lists below as ruleset files, which can be downloaded – see bottom of this post. When you get them, you can easily attach them to every project in your solution using the Solution Properties dialog. Right click the solution, and choose Properties at the bottom, or use the Analyze menu and choose “Configure Code Analysis for Solution”: In this dialog you can now choose the Memorycheck ruleset for every project you want to investigate. Pressing Apply or Ok opens every project file and changes the projects code analysis ruleset to the one we have specified here. How to define your own ruleset (skip this if you just download my predefined rulesets) If you want to define the ruleset yourself, open the properties on any project, choose Code Analysis tab near the bottom, choose any ruleset in the drop box and press Open Clear out all the rules by selecting “Source Rule Sets” in the Group By box, and unselect the box Change the Group By box to ID, and select the checks you want to include from the lists below. Note that you can change the action for each check to either warning, error or none, none being the same as unchecking the check. Now go to the properties window and set a new name and description for your ruleset. Then save (File/Save as) the ruleset using the new name as its name, and use it for your projects as detailed above. It can also be wise to add the ruleset to your solution as a solution item. That way it’s there if you want to enable Code Analysis in some of your TFS builds. Running the code analysis In Visual Studio 2010 you can either do your code analysis project by project using the context menu in the solution explorer and choose “Run Code Analysis”, you can define a new solution configuration, call it for example Debug (Code Analysis), in for each project here enable the Enable Code Analysis on Build In Visual Studio Dev-11 it is all much simpler, just go to the Solution root in the Solution explorer, right click and choose “Run code analysis on solution”. The ruleset checks The following list is the essential and critical memory checks. CheckID Message Can be ignored ? Link to description with fix suggestions CA1001 Types that own disposable fields should be disposable No http://msdn.microsoft.com/en-us/library/ms182172.aspx CA1049 Types that own native resources should be disposable Only if the pointers assumed to point to unmanaged resources point to something else http://msdn.microsoft.com/en-us/library/ms182173.aspx CA1063 Implement IDisposable correctly No http://msdn.microsoft.com/en-us/library/ms244737.aspx CA2000 Dispose objects before losing scope No http://msdn.microsoft.com/en-us/library/ms182289.aspx CA2115 1 Call GC.KeepAlive when using native resources See description http://msdn.microsoft.com/en-us/library/ms182300.aspx CA2213 Disposable fields should be disposed If you are not responsible for release, of if Dispose occurs at deeper level http://msdn.microsoft.com/en-us/library/ms182328.aspx CA2215 Dispose methods should call base class dispose Only if call to base happens at deeper calling level http://msdn.microsoft.com/en-us/library/ms182330.aspx CA2216 Disposable types should declare a finalizer Only if type does not implement IDisposable for the purpose of releasing unmanaged resources http://msdn.microsoft.com/en-us/library/ms182329.aspx CA2220 Finalizers should call base class finalizers No http://msdn.microsoft.com/en-us/library/ms182341.aspx Notes: 1) Does not result in memory leak, but may cause the application to crash The list below is a set of optional checks that may be enabled for your ruleset, because the issues these points too often happen as a result of attempting to fix up the warnings from the first set. ID Message Type of fault Can be ignored ? Link to description with fix suggestions CA1060 Move P/invokes to NativeMethods class Security No http://msdn.microsoft.com/en-us/library/ms182161.aspx CA1816 Call GC.SuppressFinalize correctly Performance Sometimes, see description http://msdn.microsoft.com/en-us/library/ms182269.aspx CA1821 Remove empty finalizers Performance No http://msdn.microsoft.com/en-us/library/bb264476.aspx CA2004 Remove calls to GC.KeepAlive Performance and maintainability Only if not technically correct to convert to SafeHandle http://msdn.microsoft.com/en-us/library/ms182293.aspx CA2006 Use SafeHandle to encapsulate native resources Security No http://msdn.microsoft.com/en-us/library/ms182294.aspx CA2202 Do not dispose of objects multiple times Exception (System.ObjectDisposedException) No http://msdn.microsoft.com/en-us/library/ms182334.aspx CA2205 Use managed equivalents of Win32 API Maintainability and complexity Only if the replace doesn’t provide needed functionality http://msdn.microsoft.com/en-us/library/ms182365.aspx CA2221 Finalizers should be protected Incorrect implementation, only possible in MSIL coding No http://msdn.microsoft.com/en-us/library/ms182340.aspx Downloadable ruleset definitions I have defined three rulesets, one called Inmeta.Memorycheck with the rules in the first list above, and Inmeta.Memorycheck.Optionals containing the rules in the second list, and the last one called Inmeta.Memorycheck.All containing the sum of the two first ones. All three rulesets can be found in the zip archive “Inmeta.Memorycheck” downloadable from here. Links to some other resources relevant to Static Code Analysis MSDN Magazine Article by Mickey Gousset on Static Code Analysis in VS2010 MSDN : Analyzing Managed Code Quality by Using Code Analysis, root of the documentation for this Preventing generated code from being analyzed using attributes Online training course on Using Code Analysis with VS2010 Blogpost by Tatham Oddie on custom code analysis rules How to write custom rules, from Microsoft Code Analysis Team Blog Microsoft Code Analysis Team Blog

Read the article

Entity Framework Batch Update and Future Queries

- by pwelter34

Entity Framework Extended Library A library the extends the functionality of Entity Framework. Features Batch Update and Delete Future Queries Audit Log Project Package and Source NuGet Package PM> Install-Package EntityFramework.Extended NuGet: http://nuget.org/List/Packages/EntityFramework.Extended Source: http://github.com/loresoft/EntityFramework.Extended Batch Update and Delete A current limitations of the Entity Framework is that in order to update or delete an entity you have to first retrieve it into memory. Now in most scenarios this is just fine. There are however some senerios where performance would suffer. Also, for single deletes, the object must be retrieved before it can be deleted requiring two calls to the database. Batch update and delete eliminates the need to retrieve and load an entity before modifying it. Deleting //delete all users where FirstName matches context.Users.Delete(u => u.FirstName == "firstname"); Update //update all tasks with status of 1 to status of 2 context.Tasks.Update( t => t.StatusId == 1, t => new Task {StatusId = 2}); //example of using an IQueryable as the filter for the update var users = context.Users .Where(u => u.FirstName == "firstname"); context.Users.Update( users, u => new User {FirstName = "newfirstname"}); Future Queries Build up a list of queries for the data that you need and the first time any of the results are accessed, all the data will retrieved in one round trip to the database server. Reducing the number of trips to the database is a great. Using this feature is as simple as appending .Future() to the end of your queries. To use the Future Queries, make sure to import the EntityFramework.Extensions namespace. Future queries are created with the following extension methods... Future() FutureFirstOrDefault() FutureCount() Sample // build up queries var q1 = db.Users .Where(t => t.EmailAddress == "[email protected]") .Future(); var q2 = db.Tasks .Where(t => t.Summary == "Test") .Future(); // this triggers the loading of all the future queries var users = q1.ToList(); In the example above, there are 2 queries built up, as soon as one of the queries is enumerated, it triggers the batch load of both queries. // base query var q = db.Tasks.Where(t => t.Priority == 2); // get total count var q1 = q.FutureCount(); // get page var q2 = q.Skip(pageIndex).Take(pageSize).Future(); // triggers execute as a batch int total = q1.Value; var tasks = q2.ToList(); In this example, we have a common senerio where you want to page a list of tasks. In order for the GUI to setup the paging control, you need a total count. With Future, we can batch together the queries to get all the data in one database call. Future queries work by creating the appropriate IFutureQuery object that keeps the IQuerable. The IFutureQuery object is then stored in IFutureContext.FutureQueries list. Then, when one of the IFutureQuery objects is enumerated, it calls back to IFutureContext.ExecuteFutureQueries() via the LoadAction delegate. ExecuteFutureQueries builds a batch query from all the stored IFutureQuery objects. Finally, all the IFutureQuery objects are updated with the results from the query. Audit Log The Audit Log feature will capture the changes to entities anytime they are submitted to the database. The Audit Log captures only the entities that are changed and only the properties on those entities that were changed. The before and after values are recorded. AuditLogger.LastAudit is where this information is held and there is a ToXml() method that makes it easy to turn the AuditLog into xml for easy storage. The AuditLog can be customized via attributes on the entities or via a Fluent Configuration API. Fluent Configuration // config audit when your application is starting up... var auditConfiguration = AuditConfiguration.Default; auditConfiguration.IncludeRelationships = true; auditConfiguration.LoadRelationships = true; auditConfiguration.DefaultAuditable = true; // customize the audit for Task entity auditConfiguration.IsAuditable<Task>() .NotAudited(t => t.TaskExtended) .FormatWith(t => t.Status, v => FormatStatus(v)); // set the display member when status is a foreign key auditConfiguration.IsAuditable<Status>() .DisplayMember(t => t.Name); Create an Audit Log var db = new TrackerContext(); var audit = db.BeginAudit(); // make some updates ... db.SaveChanges(); var log = audit.LastLog;

Read the article

Do Not Optimize Without Measuring

- by Alois Kraus

Recently I had to do some performance work which included reading a lot of code. It is fascinating with what ideas people come up to solve a problem. Especially when there is no problem. When you look at other peoples code you will not be able to tell if it is well performing or not by reading it. You need to execute it with some sort of tracing or even better under a profiler. The first rule of the performance club is not to think and then to optimize but to measure, think and then optimize. The second rule is to do this do this in a loop to prevent slipping in bad things for too long into your code base. If you skip for some reason the measure step and optimize directly it is like changing the wave function in quantum mechanics. This has no observable effect in our world since it does represent only a probability distribution of all possible values. In quantum mechanics you need to let the wave function collapse to a single value. A collapsed wave function has therefore not many but one distinct value. This is what we physicists call a measurement. If you optimize your application without measuring it you are just changing the probability distribution of your potential performance values. Which performance your application actually has is still unknown. You only know that it will be within a specific range with a certain probability. As usual there are unlikely values within your distribution like a startup time of 20 minutes which should only happen once in 100 000 years. 100 000 years are a very short time when the first customer tries your heavily distributed networking application to run over a slow WIFI network… What is the point of this? Every programmer/architect has a mental performance model in his head. A model has always a set of explicit preconditions and a lot more implicit assumptions baked into it. When the model is good it will help you to think of good designs but it can also be the source of problems. In real world systems not all assumptions of your performance model (implicit or explicit) hold true any longer. The only way to connect your performance model and the real world is to measure it. In the WIFI example the model did assume a low latency high bandwidth LAN connection. If this assumption becomes wrong the system did have a drastic change in startup time. Lets look at a example. Lets assume we want to cache some expensive UI resource like fonts objects. For this undertaking we do create a Cache class with the UI themes we want to support. Since Fonts are expensive objects we do create it on demand the first time the theme is requested. A simple example of a Theme cache might look like this: using System; using System.Collections.Generic; using System.Drawing; struct Theme { public Color Color; public Font Font; } static class ThemeCache { static Dictionary<string, Theme> _Cache = new Dictionary<string, Theme> { {"Default", new Theme { Color = Color.AliceBlue }}, {"Theme12", new Theme { Color = Color.Aqua }}, }; public static Theme Get(string theme) { Theme cached = _Cache[theme]; if (cached.Font == null) { Console.WriteLine("Creating new font"); cached.Font = new Font("Arial", 8); } return cached; } } class Program { static void Main(string[] args) { Theme item = ThemeCache.Get("Theme12"); item = ThemeCache.Get("Theme12"); } } This cache does create font objects only once since on first retrieve of the Theme object the font is added to the Theme object. When we let the application run it should print “Creating new font” only once. Right? Wrong! The vigilant readers have spotted the issue already. The creator of this cache class wanted to get maximum performance. So he decided that the Theme object should be a value type (struct) to not put too much pressure on the garbage collector. The code Theme cached = _Cache[theme]; if (cached.Font == null) { Console.WriteLine("Creating new font"); cached.Font = new Font("Arial", 8); } does work with a copy of the value stored in the dictionary. This means we do mutate a copy of the Theme object and return it to our caller. But the original Theme object in the dictionary will have always null for the Font field! The solution is to change the declaration of struct Theme to class Theme or to update the theme object in the dictionary. Our cache as it is currently is actually a non caching cache. The funny thing was that I found out with a profiler by looking at which objects where finalized. I found way too many font objects to be finalized. After a bit debugging I found the allocation source for Font objects was this cache. Since this cache was there for years it means that the cache was never needed since I found no perf issue due to the creation of font objects. the cache was never profiled if it did bring any performance gain. to make the cache beneficial it needs to be accessed much more often. That was the story of the non caching cache. Next time I will write something something about measuring.

Search Results

Search found 1699 results on 68 pages for 'skip'.

Page 57/68 | < Previous Page | 53 54 55 56 57 58 59 60 61 62 63 64 | Next Page >

- by Frank ter V.

- by davidsmalley

- by Nicolas Thery

- by alexus

- by Pritam Barhate

- by jkj

- by gameshints

- by Bron Gondwana

- by Kovács Ákos

- by Pixman

- by Warren P

- by ehime

- by eisaacson

- by Sergei

- by user356937

- by Robert Mandeville

- by Derek Meier

- by Georgi Kodinov

- by Chris Hoffman

- by Kate Moss' Open Space

- by adejuanc

- by terje

- by pwelter34

- by Alois Kraus

< Previous Page | 53 54 55 56 57 58 59 60 61 62 63 64 | Next Page >