Search Results

Search found 29426 results on 1178 pages for 'user99572 is fine'.

Page 57/1178 | < Previous Page | 53 54 55 56 57 58 59 60 61 62 63 64  | Next Page >

• MacBook can't use internet, but nslookup and ping both work

  - by Joel Coehoorn

  I have a user with a new high-end MacBook Pro that can't use the internet. He can connect to either our wired or wireless network and do things like browse file shares, but can get no further. When I brought the machine in for testing, I found that I could do an nslookup just fine, and I'm able to ping addresses returned by nslookup just fine. I'm even able to bring up web pages by entering the IP address into the address bar directly. However, when I try to ping the domain name rather than the IP address, it just sits there. So apparently I can either do name resolution or communicate with an address, but not both at the same time. Again, these symptoms occur on both the wired and wireless network. Other machines on our network, including a few other Macs, don't have this issue. Any ideas?

  Read the article

• How can I troubleshoot Windows Media Player being unable to play videos?

  - by Billy ONeal

  I have a Windows Media Player installation which is behaving strangely. I know I have the correct codecs installed for a piece of video, because it is Windows Media Video because the Zune software plays it just fine this is a recent problem; this type of video played just fine a week ago, but I have been unable to isolate the change that borked things (and I have System Restore disabled because the space on this SSD is cramped as it is) When I try to view any video in Windows Media Player, the video does not play, and I just get this: and none of the media buttons have any effect. I have already tried the following: Uninstalling and reinstalling the KLite Codec Pack Uninstalling and reinstalling Windows Media Player via "Add or Remove Windows Features" Removing and allowing WMP to rebuild it's media library by erasing the %LOCALAPPDATA%\Microsoft\Windows Media directory. sfc /scannow How can I troubleshoot this problem?

  Read the article

• "No more PTYs" when trying to start screen

  - by Attila Oláh

  When I try to start 'screen' or 'byobu', I get the following error message: $ screen No more PTYs. Sorry, could not find a PTY. [screen is terminating] I seem to have enough though: $ ls /dev/pts $ cat /proc/sys/kernel/pty/nr 0 $ cat /proc/sys/kernel/pty/max 4096 Some more info: $ uname -a Linux cube.mydedi.net 2.6.18-194.8.1.el5.028stab070.5 #1 SMP Fri Sep 17 19:10:36 MSD 2010 x86_64 x86_64 x86_64 GNU/Linux If you need any more info please comment. This is on a low-end VPS, but it used to work just fine, until it stopped working. Everything else seems to be fine though.

  Read the article

• SMTP authentication error using PHPMailer

  - by Javier

  I am using PHPMailer to send a basic form to an email address but I get the following error: SMTP Error: Could not authenticate. Message could not be sent. Mailer Error: SMTP Error: Could not authenticate. SMTP server error: VXNlcm5hbWU6 The weird thing is that if I try to send it again, IT WORKS! Every time I submit the form after that first error it works. But if I leave it for a few minutes and then try again I get the same error again. The username and password have to be right as sometimes it works fine. I even created the following (very basic) script just to test it and I got the same result <?php require("phpmailer/class.phpmailer.php"); $mail = new PHPMailer(); $mail->IsSMTP(); $mail->Host = "smtp.host.com"; $mail->SMTPAuth = true; $mail->Username = "[email protected]"; $mail->Password = "password"; $mail->From = "[email protected]"; $mail->FromName = "From Name"; $mail->AddAddress("[email protected]"); $mail->AddReplyTo("[email protected]"); $mail->IsHTML(true); $mail->Subject = "Here is the subject"; $mail->Body = "This is the HTML message body <b>in bold!</b>"; $mail->AltBody = "This is the body in plain text for non-HTML mail clients"; if(!$mail->Send()) { echo "Message could not be sent. <p>"; echo "Mailer Error: " . $mail->ErrorInfo; exit; } echo "Message has been sent"; ?> I don't think this is relevant, but I just changed my hosting to a Linux shared server. Any idea why this is happening? Thanks! ***UPDATED 02/06/2012 I've been doing some tests. The results: I tested the script in an IIS server and it worked fine. The error seems to happen only in the Linux server. Also, if I use the gmail mail server it works fine in both, IIS and Linux. Could it be a problem with the configuration of my Linux server??

  Read the article

• USB ports causing Wireless and Mobile Phone tethering drop out

  - by chrolli

  I have a problem with my USB ports and I can't seem to pinpoint the problem. I'm hoping that I can get some idea as to how to troubleshoot my problem. Problem description: I recently bought a USB Wireless Adapter in order to connect my Desktop PC to the WLAN. The dongle keeps dropping off connection regularly on average once a minute. And the connection is slow. What I've tried: I installed a network scanner to determine signal strength. The PC/adapter combo is getting about 70% signal strength. I have a laptop that has an internal Wireless adapter. I moved the laptop near the location of the PC. The signal strength was above 90%. I installed the USB adapter on the laptop. I placed the laptop near the location of the PC. The signal strength was above 80%. And there is no drop out issue. I've isolated the problem to be on the PC. I used internet tethering on my mobile phone in order to test the USB ports. I get the same problem, themobile phone keeps dropping in and out. I plugged the adapter and phone on all USB ports, and it is still dropping out on all ports. I've isolated the problem to be the Motherboard, USB hub. I updated the BIOS, and USB driver. Still dropping out. I noticed that when I used the mobile phone tethering method, the phone (iphone 5) is guarenteed to drop out and does not appear to charge if I jiggle the the 8-pin connector on the base of the phone. If I push the pin tightly on the phone, the phone starts charging, as soon as I let go, it stops and drops out from the PC. This is strange because this doesn't happen when it is plugged to the powerboard. Which means that the 8 pin connector is fine. I'm not sure what the problem is. I assume that it is to do with the USB ports not supplying enough power which in turn causes the devices to intermittently drop out. The reason I say this is because the USB cable works fine when plugged into a powerboard with enough power supplied to the phone. Only when it is plugged into the USB port on the PC, does it drop out. My motherboard is Asus P8z68-v le. My Wireless adapter is the D-link DWA131. I can't seem to find any settings in the BIOS to increase the south bridge voltage so as to supply more power to the USB ports. Although this problem only occurs when I'm trying to hook up to a device supplying internet connection. My USB HDD, Flash drives, and Mouse and Key are working fine! Any suggestions please?

  Read the article

• Apache Won't Start Windows XP Professional SP3

  - by Justin Edwards

  I have Xampp Installed on my PC, and it works fine. Every Service starts fine except Apache. I went to Services in Administrative Tools, and tried to start it fro there...no success... I tried Xampp Shell to run apache by typing: "xampp_cli start apache"...fail... I tried reinstallling Xampp...fail I tried turning my computer off/on...fail... I restored the registry from when I first installed xampp when Apache worked...still...fail Any Ideas as to what could be causing this problem?

  Read the article

• PCs using certain IP addresses cannot ping out

  - by Steve McCall

  I'm having a very strange problem which I just can't get past. The way our network is set up, we have 2 locations. The main office with all our PCs, and servers/ We are then joined to a local ISP via microwave link and they provide our internet gateway and house an additional storage server for us. All of the network infrastructure is within our office The problem is... When some PCs (and servers) are assigned IP addresses, they cannot ping the gateway or remote server however the remote server can ping the PC. Most of our internal IP addresses work fine but specific ones (e.g. .29) has this problem all the time. There is nothing else using the ip address and no other network problems. When we switch the IP on the PC, it works fine. Please help, I'm going mad. Thanks, Steve

  Read the article

• Windows 7 "Backup completed but some files were skipped"

  - by Andrew Coleson

  I set up Windows 7 Pro to backup my files to a network path (woohoo!) and chose to backup "data for newly created users, libraries", and my user folder (no system image). All went fine (although the first backup took ~12 hours for some ridiculous reason), but at the end it gave me a message that "Your backup completed, but some files were skipped. Click to see which files." I checked and the "files" skipped were my 3 network-mapped drives, which is perfectly fine and reasonable behavior (I certainly don't need it to back up my network-mapped drives as part of my local PC backup), but in the Backup and Restore center it warns me that my Last backup was "Never" and the Action Center now has a permanent "Check your backup results" issue. Is there any way to set up the backup to exclude the network-mapped drives or tell it that I really don't mind that it skipped drives I never asked it to back up?

  Read the article

• SuSE always logs a user in TVM session

  - by rohan

  Hello all, I recently installed Suse Linux enterprise Desktop 11 on my box. I created an user and logged in first time into a GNOME session without any problems. Last time I logged in I selected the session as TWM and that got me into the T windows manager just fine. Now when I log out and try to log back into a GNOME session, it will still log me into the TVM session. I have tried restarting the box but that has not helped. However, when I remote log in to the machine it will let me got on the GNOME session just fine. I'm guessing this is probably a really simple fix, however I am a Linux newbie and doing a google search isn't yielding me what I'm looking for. Thanks in advance for your help, Rohan

  Read the article

• SuSE always logs a user in TVM session

  - by rohan

  Hello all, Our sa recently installed Suse Linux enterprise Desktop 11 on my work box and I logged in first time into a GNOME session without any problems. Last time I logged in I selected the session as TWM and that got me into the T windows manager just fine. Now when I log out and try to log back into a GNOME session, it will still log me into the TVM session. I have tried restarting the box but that has not helped. Though when I remote log in to the machine it will let me get on the GNOME session just fine. I'm guessing this is probably a really simple fix, however I am a Linux newbie and doing a google search isn't yielding me what I'm looking for. My sa cant figure what is wrong either Thanks in advance for your help, Rohan

  Read the article

• Weird video problem with Linux variants

  - by alex

  I decided recently I wanted to give Linux a go so I first download a Ubuntu boot CD. The boot menu came up fine, and then a glowing Ubuntu logo was in the middle of the screen for a while. Then the screen was flickering orange and black. I guess this is where the GUI should of came up. Pushing Ctrl+Alt+F1 brought me to the command prompt OK. I thought this may have something to do with Ubuntu, so I downloaded Linux Mint. The same sort of thing happened. It booted fine, displayed it's logo for a while and then flickered, only green and black this time. Does this sound like a video card problem? How can I resolve this? Many thanks

  Read the article

• Set up internal domain to use external SMTP in Exchange 2007

  - by Geoffrey

  I'm moving to Google Apps and have setup dual-delivery. Everything is fine, but for mail sent internally (from [email protected] to [email protected]), Exchange is not using the send connectors I have pointing to Google's servers. I believe my question is similar to this question: How to force internal email through an smtp connector in exchange 2007 Again, if a user is connected to the Exchange server and tries to send to [email protected] it works just fine, but I cannot seem to force *@mydomain.com to route correctly. This should be a fairly simple, but according to this: google.com/support/forum/p/Google+Apps/thread?tid=30b6ad03baa57289&hl=en (can't post two links due to spam prevention) It does not seem possible. Any ideas?

  Read the article

• missing bootmanager after win7 installation from external hdd

  - by Alex

  today i tried to install win7 from an external hdd to my system. i tried this tut http://www.pcworld.com/article/165159/install_windows_7_from_an_external_hard_drive.html and everything went fine till i pluged off the external hdd. after i pluged it off and tried to restart the system i get a missing boot manager error. if i plug the external hdd in again it's all working fine again. i've searched for the last 2h and didn't find a good answer. did any of you have one ? regards Alex ps: i already tried any forms of reperation and the system is installed on the correct hdd.

  Read the article

• Can't save DB password in BDE Admin v5.01 (c. 1998)

  - by Ryan Armstrong

  I have a legacy version of Goldmine running which uses BDE to connect to an SQL2005 server. I'm moving the goldmine application and its database onto a new server and all is fine with the exception of the master DB password. When Goldmine starts it prompts for the password. I enter the password and all is fine but I want the prompt to go away. The password appears to be saved and obfuscated somewhere on the old server but this was configured before my time. As best I can determine, I use the bdeadmin.exe tool to modify the idapi32.cfg file but there is no password option.

  Read the article

• htaccess rewrite and auth conflict

  - by Michael

  I have 2 directories each with a .htaccess file: html/.htaccess - There is a rewrite in this file to send almost everything to url.php RewriteCond %{REQUEST_URI} !(exported/?|\.(php|gif|jpe?g|png|css|js|pdf|doc|xml|ico))$ RewriteRule (.*)$ /url.php [L] and html/exported/.htaccess AuthType Basic AuthName "exported" AuthUserFile "/home/siteuser/.htpasswd" require valid-user If I remove html/exported/.htaccess the rewriting works fine and the exported directory can be access. If I remove html/.htaccess the authentication works fine. However when I have both .htaccess files exported/ is being rewritten to /url.php. Any ideas how I can prevent it?

  Read the article

• DFS replication initial step problem

  - by vn

  Heya, I just setup DFS on my network and it's working fine, and now I'm trying to setup DFS-R on a test folder, but then at the end of the procedure (all went fine, selected my 2 folders, primary folder, replication topology and such) I get this error message (roughly translated from french) : Unable to define security on the replicated folder. The shared administration folder doesn't exist. I'm also wondering if there's any required security on the folders to replicate so that DFS-R can access it. I was trying to add SYSTEM in the security, but it won't find it/allow me. The folder has many many files and folders on the primary DFS pointer, but none on the 2nd, just created it with quite the same rights. Note that the primary DFS pointer is on a 2008 server and the DFS service and the secondary DFS pointer are on a 2008r2. Any help is very appreciated, thanks.

  Read the article

• Why is site serving different SSL certs to different browsers?

  - by TRiG

  The SSL certificate on menswearireland.com and on www.menswearireland.com works fine on Safari, Chrome, SeaMonkey, K-Meleon, QtWeb, Firefox, and Opera. However, Internet Explorer claims that there is an error: The security certificate presented by this website was not issued by a trusted certificate authority. The security certificate presented by this website was issued for a different website's address. Security certificate problems may indicate an attempt to fool you or intercept any data you send to the server. Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.0; Trident/5.0) Another site hosted on the same managed server shows no errors: achill-fieldschool.com and www.achill-fieldschool.com work fine on IE, even though as far as I can tell the certificate is set up identically. What am I doing wrong? This is a LAMPP server running Plesk. It looks like the server is showing different certificates to different clients. To some clients it shows a RapidSSL certificate made out to www.menswearireland.com with menswearireland.com as a valid alternative name. To other clients, it shows a Parallels Panel certificate, made out to Parallels Panel. Here are results from a few different online SSL checkers: most say it's fine, while two show errors. Three online checkers say it's valid Comodo SSL Check shows it as valid DigiCert SSL Check shows it as valid SSL Shopper SSL Check shows it as valid Common name: www.menswearireland.com SANs: www.menswearireland.com, menswearireland.com Valid from October 2, 2012 to November 4, 2013 Serial Number: 559425 (0x88941) Signature Algorithm: sha1WithRSAEncryption Issuer: RapidSSL CA Another online checker seems to see a completely different certificate GeoCerts SSL Check shows it as invalid Common name: Parallels Panel Organization: Parallels Valid from August 15, 2012 to August 15, 2013 Issuer: Parallels Panel Another online checker sees more than one certificate Symantic SSL Check shows it as invalid The certificate installation checker connected to the Web server and read its certificates, but could not determine which is the primary certificate for the Web server. Incidentally, on both menswearireland.com and achill-fieldschool.com the homepage will redirect from HTTPS to HTTP. To see SSL details, visit the page /account on both (that page will redirect from HTTP to HTTPS). I’ve found more information in a more detailed online SSL checker. https://www.ssllabs.com/ssltest/analyze.html?d=menswearireland.com This site works only in browsers with SNI support My understanding is that SNI (RFC 6066) is a method for putting many SSL sites on one shared IP address and port. This does not work on Internet Explorer on older versions of Windows (this has to do with the version of Windows, not the version of Internet Explorer). However, all our SSL sites are on a unique IP address, so we shouldn’t need SNI.

  Read the article

• Two network cards in one Windows 7 PC

  - by Martin

  Hi, I've upgraded from Vista to Windows 7. On Vista I used to run one network card (Intel 82566DC -2 Gigabit) for my internet which was connected to a Dovado USB mobile broadband router connected to a 3G modem. The IP setup on the card is set on DHCP. The second card (3com Ethernet link) was used to connect to our town's local WUG (wireless user group) and all worked fine. Now the problem I have with Windows 7 is that when I connect to the internet with the (Intel) first card, the internet work fine but as soon as I connect the second card to the wug my internet drops. If I then disconnect the first card (internet one) and try to connect to the wug it works. It seems that the two cards are fighting each other. Is there maybe something I can do to fix the problem? As you probably can gather from this post is that I am not an expert on PC's so please if you do answer do I in simple terms. :) Thanks, Martin

  Read the article

• how to use winpcap to send EAPOL packets on windows 7 with wireless card?

  - by caimengru0807

  I want to implement a 802.1X wireless client on Windows 7 using PEAP/MSCHAPv2. The 802.1X protocol is a data link layer protocol, it uses the EAPOL protocol to encapsulate the packets. I use the WinPcap to send and receive the EAPOL packets, however I fail to do it with the wireless NIC. It can work fine to send the EAPOL packets use wired NIC. It can also work fine to send the EAPOL packets on Windows XP using wireless NIC. So what's wrong with it on Windows 7?

  Read the article

• Executing local script/command on remote server

  - by Ian McGrath

  I have a command that I want to run on machine B from machine A. If I run the command on machine B locally, it works fine. Here is the command: for n in `find /data1/ -name 'ini*.ext'` ; do echo cp $n "`dirname $n `/` basename $n .ext`"; done From machine A, I issue this command ssh user@machineB for n in `find /data1/ -name 'ini*jsem'` ; do echo cp $n "`dirname $n `/` basename $n .jsem`"; done But I get error syntax error near unexpected token do What is wrong? I think it has something to do with double quotes, single quotes, semi colon because executing command ssh user@machineB ls works fine. So not issue of authentication or something else. Thanks

  Read the article

• Why is my IMAP port not showing as open ( yet it works? )

  - by Leo

  Ive recently setup Postfix and Dovecot IMAP on a Debian Lenny box. Sending to this domain works fine and reading the email via IMAP works fine too. I'm curious though as to why when running nmap, port 10143 is not shown as open. nmap -sS -O 127.0.0.1 Starting Nmap 4.62 ( http://nmap.org ) at 2011-11-26 21:30 GMT Interesting ports on localhost.localdomain (127.0.0.1): Not shown: 1711 closed ports PORT STATE SERVICE 22/tcp open ssh 25/tcp open smtp 80/tcp open http 3306/tcp open mysql Am I missing something with NMAP? Thanks Leo

  Read the article

• When Citrix desktop disconnects SAP Client holds session and can't log back in

  - by Stradas

  We have a fairly large Citrix implementation and have just pushed out SAP desktop client to all of the desktops. Everything else is working fine except the following problem: If a user Disconnects their session and the session is running the SAP client, (logging off works fine) the user can not reconnect and log back in. We have a script on the server that terminates the session as a work around. We can see on the server that it is the SAP client that is holding on and running. This is at a large office, but the SAP servers are in another hemisphere. As is the custom Citrix says its SAP and SAP says it is Citrix. I don't like using a powershell script as a substitute for a system configuration solution.

  Read the article

• rm failing inside cron script

  - by Nicholas

  I have a cron job calling a bash script which runs fine, except for one line inside it that is suppose to remove all fines in a directory. The result of this line is always 'no such file or directory' even though I have verified (many times) that there are files in that directory. The line in question is as simply: rm /dir1/dir2/dir3/* The script works fine when run manually in the terminal, so it must be something about how the cron is run. I've tried giving 'dir3' and all the files inside it every permission possible, so it shouldn't be a permission problem. (The directory and files are also owned by the user). I've tried specifing 'SHELL=/bin/bash' inside 'crontab'. There is no sticky bit set and there is no alias on the rm command. Interestingly changing the 'rm' command to 'ls' gives the same negative result (unless you remove the trailing '*', and then that works). What am I missing here?

  Read the article

• Google Apps email forwarding to a mailbox within the same domain

  - by Anton Gogolev

  It's either me or this feature doesn't work. I have a Google Apps account (non-paid) for example.com set up fine and dandy. Among other addresses, there are support@ and employee@. Now I want to set up Filters such that all mail sent to support@ should be forwarded to employee@. Note that this is not POP3/IMAP forwarding: I really need to do this with filters. The problem is as such: when an email arrives to support@ it is never ever forwarded to an address within the same domain, but is forwarded perfectly fine to some "outside" address (for instance, forwarding to my personal GMail account works flawlessly). How do I set up Filters to forward email propely?

  Read the article

• Teamcity nuget feed http authentication

  - by Mihalis Bagos

  Nuget feed by team city is working perfectly but there is a strange problem. Local IP (http://192.168.xx.xx:9999/feed/../): Listing through browser works Accessing packages through Visual studio 11 nuget works VPN IP (http://55.xx.xx.xx:9999/feed/../): Listing packages through browser works Accessing packages through Visual studio 11 nuget PROBLEM GUEST Account: Everything works fine, both on VPN and local IP (so its purely an authentication problem) The problem is, we can't get the user to authenticate. Using the same credentials, no matter what we try we get 401. The server VPN ip is whitelisted in internet explorer intranet settings. Any ideas? Basically HTTP authentication is failing for the VPN although it shouldn't, since the browser works fine!

  Read the article

< Previous Page | 53 54 55 56 57 58 59 60 61 62 63 64  | Next Page >