Search Results

Search found 58406 results on 2337 pages for 'windows vpn'.

Page 57/2337 | < Previous Page | 53 54 55 56 57 58 59 60 61 62 63 64  | Next Page >

• Printing to shared printers across VPN

  - by CYMR0

  I have a program that prints labels at five remote sites. Two sites, aren't working, but the rest are with an identical (as far as I can tell) setup. Using Wireshark, I have determined that the handshaking all goes well, but after the "Open Print File Response" the packet that is sent from the server, doesn't reach the client. But I'm a bit at a loss as to where I go from here. I know the port the packet was sent on (445) isn't being blocked, the RST packet gets sent on the same port and that gets there fine. It's also weird that the three out of five sites are working fine. This has been up and running for years without issue, all that we have changed is our connectivity (from DSL to bonded DSL). But this traffic is over a VPN - so it can't be the ISP interfering either can it? I'm totally stuck, and any help would be much appreciated. Thanks!

  Read the article

• How do I learn IPSec VPN implementation on FreeBSD from pfSense

  - by Lang Hai

  I've been trying to figure out a complete working solution for IPSec VPN implementation on FreeBSD but with no luck till now. pfSense seems did a fantastic job on supporting IPSec and even for mobile clients, so I downloaded and installed pfSense hoping to figure out how it works, or at least see some configuration examples, but I couldn't find anything interesting maybe because I'm not familiar with pfSense, so I'd like to ask for help. How pfSense implements IPSec, what tools are used? Where does pfSense store all its configuration files? And since pfSense has its own kernel mods and acts as a different OS, there's no way for us to install it on top of an existing FreeBSD box, and plus that it is such a great project combining those fantastic features, so my question can kinda be extended as: How do we learn from pfSense, and implement its features on top of a regular FreeBSD server?

  Read the article

• I can't do a Remote Assistance session to a Windows XP box from Windows 7.

  - by superkinhluan

  My Mom's computer is running Windows XP, and my desktop running Windows 7. She's having some technical issue, so I want to do a Remote Assistance session to her machine. However, no matter what I've tried, the Remote Assistance program doesn't connect successfully. I've verified that the Windows Firewall (on both my and her machines) is configured properly to allow Remote Assistance program to go through. What's interesting is that I have the same problem when I try to do Remote Assistance from my desktop to my laptop, which is also running Windows XP. However, when I try to connect to my girlfriend's machine, which is runninng Windows 7 this time, the connection is successful. So in the end, I guess there must be some incompability between Windows 7 and Windows XP. Does anyone experience the same issue? How did you resolve it?

  Read the article

• DELL DRAC & Ubuntu VPN Connection

  - by Mikunos

  I am trying to connect to a DELL DRAC card without success by Ubuntu VPN Connection Manager. I have these data: Protocol: PPTP SERVER IP PPTP: 1233.123.123.123 DRAC IP: 192.168.10.25 Subnet: 255.255.0.0 User: myuser Pass: mypass where have I to write these parameters? I have configured the PPTP connection using the graphical tool in Ubuntu 11.10 ... but in the /var/log/syslog I get these messages: Apr 15 11:33:15 shinet NetworkManager[1035]: <info> Starting VPN service 'pptp'... Apr 15 11:33:15 shinet NetworkManager[1035]: <info> VPN service 'pptp' started (org.freedesktop.NetworkManager.pptp), PID 18180 Apr 15 11:33:15 shinet NetworkManager[1035]: <info> VPN service 'pptp' appeared; activating connections Apr 15 11:33:15 shinet NetworkManager[1035]: <info> VPN plugin state changed: 3 Apr 15 11:33:15 shinet NetworkManager[1035]: <info> VPN connection 'Connessione VPN 1' (Connect) reply received. Apr 15 11:33:15 shinet pppd[18182]: Plugin /usr/lib/pppd/2.4.5/nm-pptp-pppd-plugin.so loaded. Apr 15 11:33:15 shinet pppd[18182]: pppd 2.4.5 started by root, uid 0 Apr 15 11:33:15 shinet pppd[18182]: Using interface ppp0 Apr 15 11:33:15 shinet pppd[18182]: Connect: ppp0 <--> /dev/pts/1 Apr 15 11:33:15 shinet NetworkManager[1035]: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/ppp0, iface: ppp0) Apr 15 11:33:15 shinet NetworkManager[1035]: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/ppp0, iface: ppp0): no ifupdown configuration found. Apr 15 11:33:15 shinet pptp[18185]: nm-pptp-service-18180 log[main:pptp.c:314]: The synchronous pptp option is NOT activated Apr 15 11:33:46 shinet pppd[18182]: LCP: timeout sending Config-Requests Apr 15 11:33:46 shinet pppd[18182]: Connection terminated. Apr 15 11:33:46 shinet avahi-daemon[1081]: Withdrawing workstation service for ppp0. Apr 15 11:33:46 shinet NetworkManager[1035]: SCPlugin-Ifupdown: devices removed (path: /sys/devices/virtual/net/ppp0, iface: ppp0) Apr 15 11:33:46 shinet NetworkManager[1035]: <warn> VPN plugin failed: 1 Apr 15 11:33:46 shinet pppd[18182]: Modem hangup Apr 15 11:33:46 shinet NetworkManager[1035]: <warn> VPN plugin failed: 1 Apr 15 11:33:51 shinet pppd[18182]: Exit. Apr 15 11:33:51 shinet NetworkManager[1035]: <warn> VPN plugin failed: 1 Apr 15 11:33:51 shinet NetworkManager[1035]: <info> VPN plugin state changed: 6 Apr 15 11:33:51 shinet NetworkManager[1035]: <info> VPN plugin state change reason: 0 Apr 15 11:33:51 shinet NetworkManager[1035]: <warn> error disconnecting VPN: Could not process the request because no VPN connection was active. Apr 15 11:33:51 shinet NetworkManager[1035]: <info> Policy set 'Wired connection 1' (eth0) as default for IPv4 routing and DNS. Apr 15 11:33:57 shinet NetworkManager[1035]: <info> VPN service 'pptp' disappeared Thanks

  Read the article

• Cisco ASA 5505 (8.05): asymmetrical group-policy filter on an L2L IPSec tunnel

  - by gravyface

  I'm trying to find a way to setup a bi-directional L2L IPSec tunnel, but with differing group-policy filter ACLs for both sides. I have the following filter ACL setup, applied, and working on my tunnel-group: access-list ACME_FILTER extended permit tcp host 10.0.0.254 host 192.168.0.20 eq 22 access-list ACME_FILTER extended permit icmp host 10.0.0.254 host 192.168.0.20 According to the docs, VPN filters are bi-directional, you always specify the remote host first (10.0.0.254), followed by the local host and (optionally) port number, as per the documentation. However, I do not want the remote host to be able to access my local host's TCP port 22 (SSH) because there's no requirement to do so -- there's only a requirement for my host to access the remote host's SFTP server, not vice-versa. But since these filter ACLs are bidirectional, line 1 is also permitting the remote host to access my host's SSH Server. The documentation I'm reading doesn't seem to clear to me if this is possible; help/clarification much appreciated.

  Read the article

• Windows 7 Index Search does not work in Google Drive folder

  - by Joel

  I recently installed Google Drive on my Windows 7 laptop and began syncing all my files a few days ago. All was well until I needed to search for some documents in my local copy of Google Drive using Windows 7 Search feature. Windows did not return any results at all. Weirdly, when I turned off Windows indexing for that folder, it began returning results. I don't mind using windows search w/o the index but sometimes it takes too long to search (especially for keywords inside documents like Word and Excel). It's driving me nuts to the point where I have given up on Windows Search and switched to Google Drive's online search to look for files (not as convenient as I still have to go back go google drive in Windows to locate the folder). Any help appreciated!

  Read the article

• Connecting PPTP VPN with Ubuntu 9.10

  - by Christian P.

  I have an ubuntu machine that I wish to connect to a VPN and have traffic routed through that. So far I have installed the pptp-linux package and tried my hand at configuring it manually as well as using pptpsetup. I am using Ubuntu 9.10, but regardless of the method I get "Couldn't find MPPE kernel support". Searching a bit for the problem seems to reveal that Ubuntu DOES come with MPPE kernel support (and has done for quite some time). If anyone can figure this out, you'd be a real lifesaver!

  Read the article

• Small business VPN solution

  - by Crash893

  I've been looking for a while but I'd like to to implement a vpn solution for anywhere from 1-5 employees at a time (possibly 10 in a year or so) edit: Basically I would like outside users to fire up a client or open a web page and be able to access things inside the company network (share drives / printers/ webapps /etc) I've looked at Astaro Gateway but im not sure if that's the right tool for the job. I know "best" is a subjective term so i would like to break it into to different suggestions 1) what is the cheapest solution given the criteria above 2) what solution will result in the least amount of headaches from the point of view of maintenance and learning curve.

  Read the article

• Aventail VPN connection doesn't work

  - by Warlax

  I installed the Aventail VPN client on both the Mac and a Windows 7 machine, both on my home network. When I try to connect one or the other (I make sure one is disconnected before connecting through the other machine), I get a connection and view the correct certificate - accept it and Aventail tells me that I am connected. However, accessing any page inside my company's network is only possible on Windows. On the Mac I get this page: It looks like my ISP doesn't know how to redirect me? Maybe something about my DNS being set incorrectly on the Mac? Our helpdesk has been completely useless.

  Read the article

• Home privacy when using work VPN on personal computer

  - by SavvySecretary

  Here is a question from not so computer savvy user. I have installed VPN client from my workplace on my personal home computer and use it to take brief connections to their network. Just recently I started to think, can they access my home folder and copy all the files from there? I have Windows 7 Pro. My home computer does not belong to the domain of my workplace and there is no addministrators account active on my computer, just my own. What is possible and what's not? Can't seem to find any specific answers by googling. Really awful thought they could snoop all around on my pc.

  Read the article

• Trying to get a new user up on VPN

  - by Chris

  Caveat: I am not a sysadmin, so please forgive the n00bness of the query. We have a new user and I'm trying to get them up on VPN. We use pfsense as an IPSEC endpoint. This person is using Shrewsoft for the client. I had created an entry in pfsense for them and then edited a previous user's config file. Shrewsoft didn't import the config file very well and I had to hand edit the information. Now we are getting gateway errors. One thing I've noticed is that there is a different between the values of the preshared key stored on the firewall and the psk stored in the config file. I assume it has something to do with a hash, but I've no idea if that's the case and whether that might be what's causing the problem. Any suggestions greatly appreciated! Tangentially, is there some software used to generate these config files?

  Read the article

• Debian PPTP VPN can't get out to the internet

  - by phidah

  I've setup a Debian pptp server which seems to be running fine. I can successfully access the local services on the server when connected to the VPN, but I cannot go out of the LAN, i.e. I cannot just go to any server out on the internet. I guess this is come kind of routing issue that won't allow me to use the server as a gateway? I couldn't really find any articles or similar that could tell me how to set this up properly. Thanks in advance.

  Read the article

• Windows 8 not booting from DVD while trying to install in a Ubuntu 14.04 system

  - by Tom

  Currently my system runs on Ubuntu 14.04. Yesterday, I deleted and formatted the partition(C drive) as NTFS in which Windows 7 was installed because Windows 7 was not booting for more than a week. I have a Windows 8 disk and it was able to boot from that disk when there was Windows 7 on my system. After the formatting of C drive yesterday, I tried to install Windows 8 by booting from the disk. Unfortunately, this time no booting happened from the disk. So I pressed F2 during the system start up and checked Boot Device Priority, Optical Drive has the first priority there. So why Windows 8 didn't boot from the disk ? I need to install Windows 8 too in my system without doing any damage to Ubuntu 14.04. How can I do it ?

  Read the article

• Simplest vpn server for linux

  - by Ian R.

  I'm supposed to setup a vpn server on our linux machine for some of our employees who travel a lot. I have 10 ip's on that server so I'm looking into a simple software (not openvpn which is a hell to digest). The software should be able to allow connections from any os type (linux, mac, windows). It should also be able to allow connections via username/password. I would like to assign 1 ip to each client. Any ideas, names?

  Read the article

• Cisco RV016 dual WAN and VPN setup

  - by sklr

  I have a VPN of several RV016 routers and I want to set some of them with 2 ISPs. I plug the two ISP cables in WAN 1 and 2 ports and configure the router to "Intelligent Balancer(Auto Mode)". It works ok like that, but the VPNs that I set use the public IP of the provider. For example if I have 5 VPNs set for ISP1 (WAN1) and the balancer sends the request trough WAN2 it can't use any of the configured VPNs because the public IP is different. How do I deal with this problem?

  Read the article

• Cisco RV016 dual WAN and VPN setup

  - by sklr

  I have a VPN of several RV016 routers and I want to set some of them with 2 ISPs. I plug the two ISP cables in WAN 1 and 2 ports and configure the router to "Intelligent Balancer(Auto Mode)". It works ok like that, but the VPNs that I set use the public IP of the provider. For example if I have 5 VPNs set for ISP1 (WAN1) and the balancer sends the request trough WAN2 it can't use any of the configured VPNs because the public IP is different. How do I deal with this problem?

  Read the article

• Windows Search Indexing SSD

  - by user654628

  I just bought a new SSD (Vertex4 from OCZ, 256G) and installed Windows 8 with it on my laptop. I am not using an external hard drive to keep extra data (paging, temp files etc) because I am using a laptop and do not want to carry it around with me. My question is, if I disable Windows indexer (Windows Search service), does Windows still search files under the search (Windows 7 Start menu search/Metro UI Windows 8 search)? Since the indexer was meant to search for files by indexing them, does this mean that Windows will not search new files? Thanks in advance.

  Read the article

• Reinstall Windows on mass computers

  - by user791022

  At work there are about 40 DELL PC's - half of them are Windows Vista and other half are Windows 7. Some of the DELL PC's are 220s and 230s model. If I want to re-install Windows then I can use a Recovery/Recovery disk on any Dell PC's (220s or 230s). It take too long to complete the setup, for example - after re installing the Windows then I need to install the drivers, update windows, install IE9, create default users account and so on. It take about 3 hour to complete setup! I am looking for a solution Where I can create an Image of windows (with driver and completed setup) and then I use same Image it on any PC's at work? If one of the PC need reinstalling - I would like to reinstall via network (LAN) by grabbing the Image? Is there something that before booting into windows - computer check something via network which can download the Image?

  Read the article

• Will Windows 7 setup overwrite Windows 8 and Ubuntu boot records?

  - by Jens

  I have Windows 8 and Ubuntu installed, both an the same physical hd (2 partitions). Windows 8 was installed after a format, Ubuntu afterwards. I used EasyBCD to setup the boot records and the boot menu order. I want to install Windows 7 as a third operating system and just add its boot record with EasyBCD. Will there be any unwanted behavior when I install it on a third partition? I already have 100 GB of unallocated space on the disk, though have not yet made the partition. I red on this site that I should install the oldest OS first, but than I would have to do a format and start again from scratch (which I clearly do not want to do). edit: On this site, the opposite is claimed, saying it's also possible to install Windows 7 after Windows 8. However, it will restore a Windows 7 boot menu instead one of Windows 8.

  Read the article

• VPN PPTPD with MPPE Support for Debian or Ubuntu

  - by user78395

  Having an unencrypted vpn connection from a windows client to linux is pretty easy by using pptpd. When I was looking for an solution for encrypted (per MPPE) connection, I found a lot of information about patching the kernel etc. - so it definitly works after some work. But all these information is pretty old (2005-2006). Is it the same solution nowadays? I am not asking for a complete instruction (only if it's short) - I am more asking for a link to the right solution.

  Read the article

• RV042 - how to broadcast UDP through VPN

  - by user47221

  I setup a gateway to gateway vpn connection with linksys RV042 router. i was able to ping each other, access file sharing ( with netbios enabled ). They are having same subnet mask 255.255.255.0, 192.168.1.0 <--- 192.168.2.0 Firewall disabled. But when i created/host LAN games (eg. warcraft3), it cannot be detect by clients at another site/LAN. As i know warcraft3 is using UDP broadcast to tell the client the game is creaetd. 1. How to broadcast UDP to another LAN ? any things to do with multicast ?

  Read the article

• Looking for a VPN server that fits my needs

  - by BCS

  This question (and some more research) has revealed that OpenVPN isn't for me. So, what are my other options? In particular things I need/want (most important first) are: A server daemon that runs on Linux without kernel modules Clients work from behind NATs and Firewalls. Free/FOSS Support for PPTP, L2TP or L2TP/IPSec PSK/CRT A architecture that makes all accesses equal: if the server is to have access to the VPN, then it must be a client. Just like everyone else. Minimal configuration/state. The first 3 are must haves and the last is a nice to have. The rest I could live without, but then again I could also live with nothing.

  Read the article

• When connected to VPN through Windows 7 running under OS X via VMWare Fusion, does traffic from the OS X side go through the VPN?

  - by user1202747

  I only have a rudimentary knowledge of VPNs. My understanding is that, in most network configurations, when a client is connected remotely to a VPN server, all network traffic passes through the VPN server before going to the client, and all data coming from the client passes through the VPN server before going out over the wider Internet. I run Windows 7 using VMWare Fusion under OS X Lion. If I access a web page in Safari, say, on the OS X side of things, does that traffic pass through the VPN server? Or does it bypass it because the two OS's are regarded as separate network devices by my LAN? I would appreciate any insight anyone can provide. Thanks.

  Read the article

• VPN between Cisco ASA 5505 AND Sonicwall SOHO3

  - by user41451

  Hello. I am trying to establish a site-to-site VPN tunnel between an old SOHO3 and an ASA 5505. The ASA has a static IP and the SOHO3 is dynamic. I have tried everything my limited knowledge lets me and need some advice on how to proceed! Phase 1 (according to the ASA logs) completes - followed by a message saying "All IPSec SA proposals found unacceptable!" so I guess the settings between the two don't match. I have played with various combinations and nothing seems to work - I am overlooking something, just not sure what it is! Any help would be appreciated.

  Read the article

• An error occured synchronizing windows with time.windows.com

  - by Killrawr

  Okay so I've tried stopping/registering the win32tm service on this Windows Server 2008 Enterprise Computer. C:\Users\Administrator>net stop w32time The Windows Time service is stopping. The Windows Time service was stopped successfully. C:\Users\Administrator>w32tm /unregister The following error occurred: Access is denied. (0x80070005) C:\Users\Administrator>w32tm /unregister W32Time successfully unregistered. C:\Users\Administrator>w32tm /register W32Time successfully registered. C:\Users\Administrator>net start w32time The Windows Time service is starting. The Windows Time service was started successfully. (Source : http://social.technet.microsoft.com/Forums/en-US/winserverDS/thread/9bdfc2cc-4775-4435-8868-57d214e1e3ba/) And I get this error from the Date and Time, Internet Time tab (After also following the steps here). I've even tried the Atomic Time Clock Worldtimeserver and I get the error The following error occurred: The specified module could not be found. (0x8007007E). I've also disabled the Windows Firewall, that might of been blocking the synchronization. I've done a file scan with sfc /scannow that came back with no errors. C:\Users\Administrator>sfc /scannow Beginning system scan. This process will take some time. Beginning verification phase of system scan. Verification 100% complete. Windows Resource Protection did not find any integrity violations. C:\Users\Administrator> But I'm not having much luck. Is there anyway lo possibly solve this? or is the time.windows.com servers unsupported? because the software is from 2008? (I really don't know :/), My ping result to time.windows.com C:\Users\Administrator>ping time.windows.com Pinging time.microsoft.akadns.net [65.55.21.22] with 32 bytes of data: Request timed out. Request timed out. Request timed out. Request timed out. Ping statistics for 65.55.21.22: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), And tracert result C:\Users\Administratortracert time.windows.com Tracing route to time.microsoft.akadns.net [65.55.21.24] over a maximum of 30 hops: 1 1 ms <1 ms <1 ms 192.168.1.1 2 32 ms 31 ms 32 ms be2-100.bras1wtc.wlg.vf.net.nz [203.109.129.113] 3 31 ms 32 ms 31 ms be5-100.ppnzwtc01.wlg.vf.net.nz.129.109.203.in-a ddr.arpa [203.109.129.114] 4 31 ms 31 ms 31 ms gi0-2-0-3.ppnzwtc01.wlg.vf.net.nz.180.109.203.in -addr.arpa [203.109.180.210] 5 31 ms 31 ms 30 ms gi0-2-0-3.ppnzwtc02.wlg.vf.net.nz [203.109.180.2 09] 6 167 ms 166 ms 166 ms ip-141.199.31.114.VOCUS.net.au [114.31.199.141] 7 175 ms 175 ms 175 ms microsoft.com.any2ix.coresite.com [206.223.143.1 43] 8 177 ms 180 ms 176 ms xe-7-0-2-0.by2-96c-1a.ntwk.msn.net [207.46.42.17 6] 9 205 ms 205 ms 204 ms xe-10-0-2-0.co1-96c-1b.ntwk.msn.net [207.46.45.3 1] 10 * * * Request timed out. 11 * * * Request timed out. 12 * * * Request timed out. 13 * * * Request timed out. 14 * * * Request timed out. 15 * * * Request timed out. 16 ^C And nslookup C:\Users\Administrator>nslookup time.windows.com Server: UnKnown Address: 192.168.1.1 Non-authoritative answer: Name: time.microsoft.akadns.net Address: 65.55.21.22 Aliases: time.windows.com

  Read the article

< Previous Page | 53 54 55 56 57 58 59 60 61 62 63 64  | Next Page >