Search Results

Search found 70459 results on 2819 pages for 'file sync'.

Page 570/2819 | < Previous Page | 566 567 568 569 570 571 572 573 574 575 576 577  | Next Page >

• IIS7 - Web Deployment Tool - SetParam/SetParamFile to set http and https bindings + Cert

  - by Andras Zoltan

  Hi, we're currently using the MS Web Deployment Tool to sync a live website and some WebServices from a staging box to two live servers. The staging box hosts the site on any IP on port 17000, whereas the two live servers are load-balanced and have a different IP for each of them. At present, I generate two separate packages for deployment - one for each machine - using the sync operation and specifying a DestinationBinding parameter as follows: msdeploy -verb:sync -source:WebServer,computerName=localhost -dest:package="machinename.zip" -setParam:type="DestinationBinding",scope="SiteName",value="ip_address:port:". (Split across multiple lines to make it easier to read!) I run this twice, with a different target filename and ip address for each of the two machines. When it comes to deployment, I simply do a sync from each package to its respective live site. I know, I know - I should be able to do it by generating one parameterised package and then perhaps using the SetParamFile switch for each of the two Servers - believe me I'd like to, but the documentation on doing this is frankly non-existent. Now I need to configure and deploy both HTTP and HTTPS binding for this site; including also the ssl cert that is to be used. I've added an SSL binding for the site on the staging box - which uses a development cert (which will need to be replaced - or should the staging box be using the live cert?), and now the above command line has the effect of replacing the target IP on both http and https entries. It appears that I cannot specify multiple bindings plus the cert information in the DestinationBinding value in the -setParam above, so anyone know how would I go about doing this? Any help greatly appreciated.

  Read the article

• openerp error openid module

  - by spy86

  I installed OpenERP server Centos 6.4. When I try to start the server with OpenERP module auth_openid I gets this error: [openerp@ bin]$ ./openerp-server --load=web,auth_openid 2013-10-22 13:02:18,705 22381 INFO ? openerp: OpenERP version 7.0 2013-10-22 13:02:18,705 22381 INFO ? openerp: addons paths: /opt/openerp/openerp-sr-preprod/current/server/openerp/addons 2013-10-22 13:02:18,705 22381 INFO ? openerp: database hostname: localhost 2013-10-22 13:02:18,705 22381 INFO ? openerp: database port: 5432 2013-10-22 13:02:18,705 22381 INFO ? openerp: database user: openerp 2013-10-22 13:02:18,706 22381 WARNING ? openerp.modules.module: module web: module not found 2013-10-22 13:02:18,707 22381 CRITICAL ? openerp.modules.module: Couldn't load module web 2013-10-22 13:02:18,707 22381 CRITICAL ? openerp.modules.module: No module named web 2013-10-22 13:02:18,707 22381 ERROR ? openerp.service: Failed to load server-wide module web. The web module is provided by the addons found in the openerp-web project. Maybe you forgot to add those addons in your addons_path configuration. Traceback (most recent call last): File "/opt/openerp/openerp-sr-preprod/current/server/openerp/service/init.py", line 60, in load_server_wide_modules openerp.modules.module.load_openerp_module(m) File "/opt/openerp/openerp-sr-preprod/current/server/openerp/modules/module.py", line 405, in load_openerp_module import('openerp.addons.' + module_name) File "/opt/openerp/openerp-sr-preprod/current/server/openerp/modules/module.py", line 132, in load_module f, path, descr = imp.find_module(module_part, ad_paths) ImportError: No module named web 2013-10-22 13:02:18,707 22381 WARNING ? openerp.modules.module: module auth_openid: module not found 2013-10-22 13:02:18,708 22381 CRITICAL ? openerp.modules.module: Couldn't load module auth_openid 2013-10-22 13:02:18,708 22381 CRITICAL ? openerp.modules.module: No module named auth_openid 2013-10-22 13:02:18,708 22381 ERROR ? openerp.service: Failed to load server-wide module auth_openid. Traceback (most recent call last): File "/opt/openerp/openerp-sr-preprod/current/server/openerp/service/init.py", line 60, in load_server_wide_modules openerp.modules.module.load_openerp_module(m) File "/opt/openerp/openerp-sr-preprod/current/server/openerp/modules/module.py", line 405, in load_openerp_module import('openerp.addons.' + module_name) File "/opt/openerp/openerp-sr-preprod/current/server/openerp/modules/module.py", line 132, in load_module f, path, descr = imp.find_module(module_part, ad_paths) ImportError: No module named auth_openid 2013-10-22 13:02:18,713 22381 INFO ? openerp: OpenERP server is running, waiting for connections... Exception in thread Thread-1: Traceback (most recent call last): File "/usr/lib64/python2.6/threading.py", line 532, in bootstrap_inner self.run() File "/usr/lib64/python2.6/threading.py", line 484, in run self.__target(*self.__args, **self.__kwargs) File "/opt/openerp/openerp-sr-preprod/current/server/openerp/service/wsgi_server.py", line 436, in serve httpd = werkzeug.serving.make_server(interface, port, application, threaded=True) File "/usr/lib/python2.6/site-packages/Werkzeug-0.7-py2.6.egg/werkzeug/serving.py", line 399, in make_server passthrough_errors, ssl_context) File "/usr/lib/python2.6/site-packages/Werkzeug-0.7-py2.6.egg/werkzeug/serving.py", line 331, in __init HTTPServer.init(self, (host, int(port)), handler) File "/usr/lib64/python2.6/SocketServer.py", line 402, in init self.server_bind() File "/usr/lib64/python2.6/BaseHTTPServer.py", line 108, in server_bind SocketServer.TCPServer.server_bind(self) File "/usr/lib64/python2.6/SocketServer.py", line 413, in server_bind self.socket.bind(self.server_address) File "", line 1, in bind error: [Errno 98] Address already in use Anybody have some advice what's wrong ? Regards

  Read the article

• Move files from ftp server to s3

  - by lev

  I would like to set up an ftp server, where users will upload files, and for each file, put it on s3 storage, and delete it from the ftp server. (the server runs on ec2 ubuntu) Here are the stuff I already tried, with no success.. Mount s3 bucket using s3fs. I followed those instructions, but there is a bug in the latest version of s3fs, that prevents it from working. The bug was fixed on the develop branch, but I don't want to use unstable version on my production. Use vsftpd and using s3cmd sync via cron to sync the files periodically. The problem with that approach, is that s3cmd can start running in the middle of a file upload, and start synching the incomplete file. Also s3cmd doesn't give any feedback it the sync fails, so I have no way of knowing if I can delete the files after the sync command finished running. Use pure-ftpd's upload script feature (which allows to run a script after a file is finished uploading), but I noticed that if the file upload was failed in the middle, the script will run anyway, and I have no way of knowing if the upload was successful or not. I've been at it for a few days now, and I'm at a loss here. Any suggestions will be welcomed.

  Read the article

• How to display/define Mirror/Stripping pairs with mdadm

  - by Chris

  I want to make a standard linux software Raid10 over 4 HDD. The server has 4HDDs, 2 pairs from different vendors in order to avoid batch problems. I want to have the mirror over two different Vendors, and then the Stripe over the mirror pairs. I could do that by manually creating Raid1/0, but mdadm supports Raid level 10. I just cant figure out how the Raid10 is then handled and how the data is distributed. mdadm --detail /dev/md10 /dev/md10: Version : 1.2 Creation Time : Wed May 28 11:06:23 2014 Raid Level : raid10 Array Size : 1953260544 (1862.77 GiB 2000.14 GB) Used Dev Size : 976630272 (931.39 GiB 1000.07 GB) Raid Devices : 4 Total Devices : 4 Persistence : Superblock is persistent Update Time : Wed May 28 11:06:23 2014 State : clean, resyncing (PENDING) Active Devices : 4 Working Devices : 4 Failed Devices : 0 Spare Devices : 0 Layout : near=2 Chunk Size : 512K Name : pdwhost:10 (local to host pdwhost) UUID : a3de0ad5:9e694ee1:addc6786:c4449e40 Events : 0 Number Major Minor RaidDevice State 0 8 1 0 active sync /dev/sda1 1 8 81 1 active sync /dev/sdf1 2 8 97 2 active sync /dev/sdg1 3 8 113 3 active sync /dev/sdh1 does not really give any information about that. How it should be: Raid 1 / Mirror over /dev/sda1 /dev/sdf1 and /dev/sdg1 /dev/sdh1 Raid 0 over the two Raid 1 pairs Is it possible to do that with the built in "level=10", how can I see what pairs are mirrored? Thanks a lot for you help

  Read the article

• unittest import error with virtualenv + google-app-engine-django

  - by Ray Yun

  I'm working with google-app-engine-django + zipped django. Just running "python manage.py test" succeeded without error. But with virtualenv, test was failed with "import unittest error". same error with Django 1.1. - OSX 10.5.6 - google-app-engine-django (r101 via svn) : r100 was failed with launcher 1.3.0 - GoogleAppLauncher 1.3.0 - Django 1.1 & 1.1.1 (zipped) : both failed - virtualenv 1.4.5 - virtualenvwrapper 1.24 Error Message: (django_appengine)Reiot:warclouds Reiot$ python manage.py test WARNING:root:Could not read datastore data from /var/folders/UZ/UZ1vQeLFH2ShHk4kIiLcFk+++TI/-Tmp-/django_google-app-engine-django.datastore INFO:root:zipimporter('/Volumes/data/Documents/warclouds/django.zip', 'django/core/serializers/') .WARNING:root:Can't open zipfile /Users/Reiot/.virtualenvs/django_appengine/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg: IOError: [Errno 13] file not accessible: '/Users/Reiot/.virtualenvs/django_appengine/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg' WARNING:root:Can't open zipfile /Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5/site-packages/setuptools-0.6c9-py2.5.egg: IOError: [Errno 13] file not accessible: '/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5/site-packages/setuptools-0.6c9-py2.5.egg' ERROR:root:Exception encountered handling request Traceback (most recent call last): File "/Applications/GoogleAppEngineLauncher.app/Contents/Resources/GoogleAppEngine-default.bundle/Contents/Resources/google_appengine/google/appengine/tools/dev_appserver.py", line 3177, in _HandleRequest self._Dispatch(dispatcher, self.rfile, outfile, env_dict) File "/Applications/GoogleAppEngineLauncher.app/Contents/Resources/GoogleAppEngine-default.bundle/Contents/Resources/google_appengine/google/appengine/tools/dev_appserver.py", line 3120, in _Dispatch base_env_dict=env_dict) File "/Applications/GoogleAppEngineLauncher.app/Contents/Resources/GoogleAppEngine-default.bundle/Contents/Resources/google_appengine/google/appengine/tools/dev_appserver.py", line 515, in Dispatch base_env_dict=base_env_dict) File "/Applications/GoogleAppEngineLauncher.app/Contents/Resources/GoogleAppEngine-default.bundle/Contents/Resources/google_appengine/google/appengine/tools/dev_appserver.py", line 2379, in Dispatch self._module_dict) File "/Applications/GoogleAppEngineLauncher.app/Contents/Resources/GoogleAppEngine-default.bundle/Contents/Resources/google_appengine/google/appengine/tools/dev_appserver.py", line 2289, in ExecuteCGI reset_modules = exec_script(handler_path, cgi_path, hook) File "/Applications/GoogleAppEngineLauncher.app/Contents/Resources/GoogleAppEngine-default.bundle/Contents/Resources/google_appengine/google/appengine/tools/dev_appserver.py", line 2185, in ExecuteOrImportScript exec module_code in script_module.__dict__ File "/Volumes/data/Documents/warclouds/main.py", line 28, in <module> from appengine_django import InstallAppengineHelperForDjango File "/Applications/GoogleAppEngineLauncher.app/Contents/Resources/GoogleAppEngine-default.bundle/Contents/Resources/google_appengine/google/appengine/tools/dev_appserver.py", line 1264, in Decorate return func(self, *args, **kwargs) File "/Applications/GoogleAppEngineLauncher.app/Contents/Resources/GoogleAppEngine-default.bundle/Contents/Resources/google_appengine/google/appengine/tools/dev_appserver.py", line 1914, in load_module return self.FindAndLoadModule(submodule, fullname, search_path) File "/Applications/GoogleAppEngineLauncher.app/Contents/Resources/GoogleAppEngine-default.bundle/Contents/Resources/google_appengine/google/appengine/tools/dev_appserver.py", line 1264, in Decorate return func(self, *args, **kwargs) File "/Applications/GoogleAppEngineLauncher.app/Contents/Resources/GoogleAppEngine-default.bundle/Contents/Resources/google_appengine/google/appengine/tools/dev_appserver.py", line 1816, in FindAndLoadModule description) File "/Applications/GoogleAppEngineLauncher.app/Contents/Resources/GoogleAppEngine-default.bundle/Contents/Resources/google_appengine/google/appengine/tools/dev_appserver.py", line 1264, in Decorate return func(self, *args, **kwargs) File "/Applications/GoogleAppEngineLauncher.app/Contents/Resources/GoogleAppEngine-default.bundle/Contents/Resources/google_appengine/google/appengine/tools/dev_appserver.py", line 1767, in LoadModuleRestricted description) File "/Volumes/data/Documents/warclouds/appengine_django/__init__.py", line 44, in <module> import unittest ImportError: No module named unittest INFO:root:"GET / HTTP/1.1" 500 - INFO:root:zipimporter('/Users/Reiot/.virtualenvs/django_appengine/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '') INFO:root:zipimporter('/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5/site-packages/setuptools-0.6c9-py2.5.egg', '') F........................................................... ====================================================================== FAIL: a request to the default page works in the dev_appserver ---------------------------------------------------------------------- Traceback (most recent call last): File "/Volumes/data/Documents/warclouds/appengine_django/tests/integration_test.py", line 176, in testBasic self.assertEquals(rv.status_code, 200) AssertionError: 500 != 200 I also tried with console import but it was ok. > which python /Users/Reiot/.virtualenvs/django_appengine/bin/python > python >>> import unittest Here is my environments: $ mkvirtualenv --no-site-packages no-django $ mkvirtualenv --no-site-packages django-1.1 $ mkvirtualenv --no-site-packages django-1.1.1 (django-1.1)$ easy_install Django-1.1.tar (django-1.1.1)$ easy_install Django-1.1.1.tar $ mkdir google-app-engine-django-svn $ cp -r google-app-engine-django-svn google-app-engine-django-svn-django-1.1 // copy appropriate django.zip $ cp -r google-app-engine-django-svn google-app-engine-django-svn-django-1.1.1 // copy appropriate django.zip

  Read the article

• Why it's failed to load main-class manifest attribute from jar-file?

  - by Roman

  I have created a jar file in this way jar cf jar-file input-files. Now I try to run it. This does not work: jre -cp app.jar MainClass (jre command is not found). This java -jar main.jar also does not work (Failed to load Main-Class manifest attribute from main.jar). I also found out that To run an application packaged as a JAR file (version 1.2 -- requires Main-Class manifest header) What is the "Main-Class manifest header" how do I create it and where do I put it? ADDED I made a mistake in my original question. The second command I tried was: java -jar main.jar.

  Read the article

• XML Reading org.xml.sax.SAXParseException: Expecting end of file.

  - by vivekbirdi

  Hi, I am getting problem while parsing XML File using JDE 4.6. FileConnection fconn = (FileConnection)Connector.open ("file:///SDCard/Dictionary.xml",Connector.READ_WRITE); InputStream din= fconn.openInputStream(); DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance(); DocumentBuilder builder = factory.newDocumentBuilder(); Document document = builder.parse(din); here I am getting Exception at Document document = builder.parse(din); org.xml.sax.SAXParseException: Expecting end of file. please give me some solution. Thanks

  Read the article

• Wix light.exe : error LGHT0001: The system cannot open the device or file specified.

  - by Angelo

  Today we build our product with MSBuild /m to build with multiprocess. Before we do a change to heat some files in pre-build event, build with MSBuild multiprocess can be success. Now build is failed with following exception: 124light.exe : error LGHT0001: The system cannot open the device or file specified. (Exception from HRESULT: 0x8007006E) [...MSI.wixproj] Exception Type: System.IO.FileLoadException Stack Trace: at Microsoft.Tools.WindowsInstallerXml.MergeMod.IMsmMerge2.OpenModule(String fileName, Int16 language) at Microsoft.Tools.WindowsInstallerXml.Binder.MergeModules(String tempDatabaseFile, Output output, FileRowCollection fileRows, StringCollection suppressedTableNames) at Microsoft.Tools.WindowsInstallerXml.Binder.BindDatabase(Output output, String databaseFile) at Microsoft.Tools.WindowsInstallerXml.Binder.Bind(Output output, String file) at Microsoft.Tools.WindowsInstallerXml.Tools.Light.Run(String[] args) (Link target) - light.exe : error LGHT0001: The system cannot open the device or file specified. (Exception from HRESULT: 0x8007006E) [...Msi.wixproj] using Wix 3.8

  Read the article

• VisualStudio2010 Debugging - The process cannot access the file ... because it is being used by anot

  - by Richard Forss

  I'm unable to debug a WinForms C# application using the released version of Visual Studio 2010 Prof. I get the following error message after the second debugging run. Error 9 Unable to copy file "obj\x86\Debug\Arrowgrass Reports.exe" to "bin\Debug\Arrowgrass Reports.exe". The process cannot access the file 'bin\Debug\Arrowgrass Reports.exe' because it is being used by another process. I've tried a pre-build script to attempt to delete this file, but it's locked by Visual Studio. There are a few references to this on the net so it is a know problem. Does anyone have a hotfix or effective work-around?

  Read the article

• Why won't Windows Installer use the UI in the .msi file during removal?

  - by billmcc

  Has anyone been able to get Windows Installer to use the InstallUISequence table during removal? I started with an MSI file produced by the Visual Studio msi builder, decompiled it into WiX source code and handcrafted it, but I cannot get the installer to use my UI during removal. It insists on using a default UI provided by Windows Installer. I have also analyzed several MSI files, and I have been unable to find one where Windows Installer will use the provided UI during removal. I captured the msiexec logs during removal, and sure enough, Windows Installer appears to be ignoring the InstallUISequence table. It seems that msiexec runs with minimal UI during removal. If I specify the /qf switch (use full UI) during removal, then Windows Installer does take the UI from the .msi file. However, this doesn't help the regular user, because she won't do the removal from msiexec. Does anyone know of a way to convince Windows Installer to use the UI in the MSI file by default?

  Read the article

• I need to take an array of three lines in a text file and sort them base on the first line in Java.

  - by Cory

  I need to take an array of three lines in a text file and sort them base on the first line in Java. I also need to manipulate this as well and then print to screen. I have a test file that is formatted like this: 10 Michael Jackson 12 Richard Woolsey I need to input this from a text file and then rearrange it based on the number associated with the name. At that point, I need to use a random number generator and assign a variable based on the random number to each name. Then I need to print to screen the variable I added and the name in a different format. Here is an example of the output: 12: Woolsey, Richard Variable assigned 10: Jackson, Michael Other variable assigned I highly appreciate any help. I ask because I do not really know how to input the three lines as one variable and then manipulate later on in the program. Thanks, Cory

  Read the article

• How to pass string file path as HttpPostedfile to fileupload control?

  - by rahul

  Hi friends, I have got little tricky issue i.e I am using API of a product which has few methods for uploading image. The UI part of the product has one file upload control which takes files and convert that into binary and save it to database. In the coding part they are using one method where they send this fileupload.postedfile as one of the input parameter to the method. Now my requirement is, I have a directory where there are hundred of files which i have to send each file one by after another to this method as a input. Now i wish to know how to pass a file name as "HttpPostedFile" to that method as a parameter. I have no other option other than using that API (our clients requirement). Thanks

  Read the article

• FileStream to save file then immediately unlock in C# ?

  - by aron

  Hello, I have this code that saves a pdf file. FileStream fs = new FileStream(SaveLocation, FileMode.Create); fs.Write(result.DocumentBytes, 0, result.DocumentBytes.Length); fs.Flush(); fs.Close(); It works fine. However sometimes it does not release the lock right away and that causes file locking exceptions with functions run after this one run. Is there a ideal way to release the file lock right after the fs.Close() thanks!

  Read the article

• Can I separate portions of my plugin.xml file into multiple xml files for an Eclipse plugin?

  - by wildabeast

  I have created an eclipse plugin, with a plugin.xml file. I have created an extension to the org.eclipse.wst.common.snippets.SnippetContributions extension point. The xml contents of this extension point has gotten really big. Is there a way that I can move the contents of my snippets extension to a separate file? Something like this: In plugin.xml: <extension point="org.eclipse.wst.common.snippets.SnippetContributions" file="snippets.xml"></extenstion> and in snippets.xml: <category ....> <item..../item> </category>...

  Read the article

• Can't find my.cnf file so I can enable InnoDB - is there another way?

  - by Jared

  Hey all, I am trying to Magento running on a share server, and am having difficulty. When I look at the engines in PHPmyAdmin, I get InnoDB DISABLED. So I look in /etc/, and there is no my.cnf file. There is a ftpquota and a .boxtrapper file, but nothing else. I know I can probably create a new one, but this is a server that hosts a lot of sites. I'm afraid I will mess someone up. So is there a way to maybe create a my.cnf file that only enable InnoDB and doesn't effect anything else? Or is there another way to enable it?

  Read the article

• config file in schedule.rb with Rails Whenever gem?

  - by yuval

  I have a file called config.yml in my /config folder of my rails application. I also have an initializer: config/initializers/load_config.rb with the following code: APP_CONFIG = YAML.load_file("#{RAILS_ROOT}/config/config.yml") I am using the Whenever gem to set up a cron job, and would like to use my APP_CONFIG to call a function like so: #inside schedule.rb every 2.hours do runner "MyModel.someMethod('#{APP_CONFIG['some_value']}')" end but the Whenever gem doesn't seem to recognize the config file when I call whenever --update-crontab mysite How can I incorporate values from my configuration in my schedule.rb file (instead of hard-coding the value)? Thanks!

  Read the article

• Different log4j patterns on the same same file depending on log level?

  - by gorca

  Hi, I'd like for log events of type WARN or higher to show the class name. All others would not show the class name. this is both to simplify the log and to not have the performance hit on lower events such as TRACE. This must all go to the same log file. For example, right now, I have this on my log file: 2010-04-06 18:50:16,416 [main] INFO org.nyjord.lib.gather.TempMachine - initialised successfuly. 2010-04-06 18:50:16,416 [main] FATAL org.nyjord.lib.gather.TempMachine - not all paths could be located I would prefer this ON THE SAME FILE: 2010-04-06 18:50:16,416 [main] INFO - initialised successfuly. 2010-04-06 18:50:16,416 [main] FATAL org.nyjord.lib.gather.TempMachine - not all paths could be located Help would be really welcome.

  Read the article

• GUI to add a .props file to a VS 2010 project?

  - by jwfearn

  Visual Studio 2010 has no longer uses .vsprops files and instead uses .props files. To add a .vsprops file to a Visual Studio 2008 project, one could right-click the project icon in the Solution Explorer panel, choose Properties, go to the Configuration Properties | General section, and modify the Inherited Project Property Sheets property to contain a list of .vsprops paths. One could also modify the Visual Studio 2008 project file directly. Is there a way in the Visual Studio 2010 GUI to add .props files to a project? The Inherited Project Property Sheets property seems to have been removed. If manual editing of the project file is the only way to include .props files, where can one find documentation on doing it?

  Read the article

• Is there a better way than this to find out if an IsolatedStorage file exists or not?

  - by Edward Tanguay

  I'm using IsolatedStorage in a Silverlight application for caching, so I need to know if the file exists or not which I do with the following method. I couldn't find a FileExists method for IsolatedStorage so I'm just catching the exception, but it seems to be a quite general exception, I'm concerned it will catch more than if the file doesn't exist. Is there a better way to find out if a file exists in IsolatedStorage than this: public static string LoadTextFromIsolatedStorageFile(string fileName) { string text = String.Empty; using (IsolatedStorageFile isf = IsolatedStorageFile.GetUserStoreForApplication()) { try { using (IsolatedStorageFileStream isfs = new IsolatedStorageFileStream(fileName, FileMode.Open, isf)) { using (StreamReader sr = new StreamReader(isfs)) { string lineOfData = String.Empty; while ((lineOfData = sr.ReadLine()) != null) text += lineOfData; } } return text; } catch (IsolatedStorageException ex) { return ""; } } }

  Read the article

• How do I set DateTimeStamp on file after uploading to FTP?

  - by Anthony Brien

  I have an application that deploys game data files to different gaming consoles. If matching files on the users machine and the console have identical size and dates, they must not be re-deployed. On Xbox, this is easily accomplished because an XDK library used to upload files on the console allows me to set the date on the uploaded files to match the dates on the user's machine. On Ps3 however, I use an FTP service running on the console. I use WebClient.UploadFileAsync to upload files to the console. However, I cannot figure out how I can set the uploaded file's date timestamp, leaving me with only the file size to determine identical files which is unsafe. I was wondering if there was a way to set a file's date timestamp through the WebClient interface?

  Read the article

• How to download a file from a server using Java Socket?

  - by Ada

  Hi, I have an assignment about uploading and downloading a file to a server. I managed to do the uploading part using Java Sockets however I am having a hard time doing the downloading part. I should use Range: for downloading parellel. In my request, I should have the Range: header. But I don't understand how I will receive the file with that HTTP GET request. All the examples I have seen was about uploading a file. I already did it. I can upload .exe, image, .pdf, anything and when I download them back (by my browser), there are no errors. Can you help me with the downloading part? Can you give me an example beacuse I really didn't get it.

  Read the article

• How to unpack, update and repack Adobe air file?

  - by Abhishek Jain

  I need to unpack air file, update it and repack it. Can anybody please help me in this regard? In java, for jar file we can use winrar utlity for this kind. Please suggest how can we do for air.Is there any utility for adobe air. I tried with winzip/winrar. I changed its extension to .zip file and opened it in winzip and winrar. When I tried to update it, it got corrupted. -Abhishek

  Read the article

• SharePoint 2010 - Can two or more people edit a file at the same time?

  - by Tobias Funke

  I have a SharePoint 2010 site with a document library for storing Excel files. If someone is editing an Excel file (using stand-alone Excel, not Excel services), everyone else will be forced to open the file read-only until the first person is done editing. Is there a way around this? What I want is to allow two or more people to be able to edit the file at the same time. Also, I don't want people to overwrite each other. Instead, I'd like SharePoint to merge their changes. Is this possible in SharePoint 2010?

  Read the article

• what special issues are at play when loading a config file from the comand prompt with DTExec

  - by Ralph Shillington

  If I run a package from the Management Studio, and specify a configuration file, everything works as expected. However if I try and run the package from the command prompt with DTExec I get the error: Cannot load the XML configuration file. The XML configuration file may be malformed or not valid. The command I'm using to execute the package is: dtexec /conf ConfigurationDemo.dtsConfig /f Package.dtsx I am running the dtexec from the folder where these two files reside. Is there an addtional switch or something that must used to get dtexec to behave the same was at the management Stduio in launching a package?

  Read the article

• How to secure access to SWF file using ASP.NET?

  - by elsharpo

  hi guys, We have a swf file that we want to secure and make available only to authorized users. I embedded the file in an aspx page and that works fine, since ASP.NET handles the aspx page, I can use ASP.NET authorization features and in the web.config restrict the access to roles="AllowedUsers" for example. However smart users could still get to the file by accessing directly for example www.mysite/flash.swf. We want to make that kind of access secure. Any help would be greatly appreciated! Thanks!

  Read the article

< Previous Page | 566 567 568 569 570 571 572 573 574 575 576 577  | Next Page >