format conversion - Page 570

setting up Ubuntu 10.10 as paravirtualized guest in Xen on RHEL5 host - what kernel?

- by kostmo

I've discovered the tool ubuntu-vm-builder, which I've installed and then invoked on an Ubuntu workstation as: sudo vmbuilder xen ubuntu --suite maverick --flavour virtual --arch amd64 --mem=512 --rootsize 8192 This workstation is not the intended target host of the virtual machine, however; I would like to host the guest on a Red Hat Enterprise Linux 5 machine that is running Xen 3.0.3. The output of this command appears to be a folder named ubuntu-xen containing three files: tmpXXXXXX, a very large file which I assume is the root partition image tmpYYYYYY, a somewhat large file which I assume is the swap partition image xen.conf, a text file I have copied the xen.conf file to the RHEL server's /etc/xen directory under the new name newvm, adjusting the paths of tempXXXXXX and tempYYYYYYin the file after also copying them from my local workstation to the RHEL server. When I launch the Virtual Machine Manager virt-manager, I can see the newvm virtual machine listed underneath the Dom0 machine. When I try to start newvm, I get the error: Error starting domain: virDomainCreate() failed POST operation failed: (xend.err 'Error creating domain: Kernel image does not exist: None') Indeed, there exists an entry kernel = 'None' in the xen.conf file. How do I find out what the path of the kernel should be? Is this path supposed to be to a kernel stored on the local filesystem of the RHEL5 host, or is it supposed to be a path inside the guest image? I see that the vmbuilder command provides for a --xen-kernel option, along with a --xen-ramdisk option, but I'm not sure what to use for either. I think I should be able to get this to work, since Ubuntu is said to be supported as a Xen guest, even though the Xen 4.0.1 docs state support for only a limited set of distributions, Ubuntu excluded. Update 1 When running vmbuilder on my local workstation, I did observe an output line saying: Calling hook: install_kernel and later, output lines saying: update-initramfs: Generating /boot/initrd.img-2.6.35-23-virtual [...] run-parts: executing /etc/kernel/postinst.d/initramfs-tools 2.6.35-23-virtual /boot/vmlinuz-2.6.35-23-virtual So in the xen.conf file, I tried setting the lines: kernel = '/boot/vmlinuz-2.6.35-23-virtual' ramdisk = '/boot/initrd.img-2.6.35-23-virtual' When trying to start the VM, I got an error similar to last time: Error starting domain: virDomainCreate() failed POST operation failed: (xend.err 'Error creating domain: Kernel image does not exist: /boot/vmlinuz-2.6.35-23-virtual') This makes me think that the RHEL5 machine is looking for local files, rather than a file within the binary guest disk image. After running sudo updatedb on my workstation, neither of those files were found. If the vmbuilder tool had tried to install them, it must have failed. Update 2 I was able to extract the kernel and initrd images from the guest disk binary by mounting it: mkdir mnt_tmp sudo mount ubuntu-xen/tmpXXXXXX mnt_tmp/ -o loop cp mnt_tmp/boot/vmlinuz-2.6.35-23-virtual virtual_kernel_ubuntu cp mnt_tmp/boot/initrd.img-2.6.35-23-virtual virtual_initrd_ubuntu These two files I copied to the RHEL5 server, and edited the xen.conf file to point to them as kernel and ramdisk. With this done, I could "run" the newvm virtual machine from within virt-manager, but was met with the message Console Not Configured For Guest when I double clicked the entry to open the Virtual Machine Console. As suggested by a forum, I then added the line vfb = [ 'type=vnc' ] to the configuration file, recreated the virtual machine (a ~10 min process), and this time got the message: Connecting to console for guest This remained indefinitely; after selecting View - Serial Console, I found a kernel panic: [5442621.272173] Kernel panic - not syncing: Attempted to kill the idle task! [5442621.272179] Pid: 0, comm: swapper Tainted: G D 2.6.35-23-virtual #41-Ubuntu [5442621.272184] Call Trace: [5442621.272191] [<ffffffff815a1b81>] panic+0x90/0x111 [5442621.272199] [<ffffffff810652ee>] do_exit+0x3be/0x3f0 [5442621.272204] [<ffffffff815a5e20>] oops_end+0xb0/0xf0 [5442621.272211] [<ffffffff8100ddeb>] die+0x5b/0x90 [5442621.272216] [<ffffffff815a56c4>] do_trap+0xc4/0x170 [5442621.272221] [<ffffffff8100ba35>] do_invalid_op+0x95/0xb0 [5442621.272227] [<ffffffff8130851c>] ? intel_idle+0xac/0x180 [5442621.272232] [<ffffffff810072bf>] ? xen_restore_fl_direct_end+0x0/0x1 [5442621.272239] [<ffffffff815a48fe>] ? _raw_spin_unlock_irqrestore+0x1e/0x30 [5442621.272247] [<ffffffff8108dfb7>] ? tick_broadcast_oneshot_control+0xc7/0x120 [5442621.272253] [<ffffffff8100ad5b>] invalid_op+0x1b/0x20 [5442621.272259] [<ffffffff8130851c>] ? intel_idle+0xac/0x180 [5442621.272264] [<ffffffff813084e0>] ? intel_idle+0x70/0x180 [5442621.272269] [<ffffffff810072bf>] ? xen_restore_fl_direct_end+0x0/0x1 [5442621.272275] [<ffffffff8148a147>] cpuidle_idle_call+0xa7/0x140 [5442621.272281] [<ffffffff81008d93>] cpu_idle+0xb3/0x110 [5442621.272286] [<ffffffff815873aa>] rest_init+0x8a/0x90 [5442621.272291] [<ffffffff81b04c9d>] start_kernel+0x387/0x390 [5442621.272297] [<ffffffff81b04341>] x86_64_start_reservations+0x12c/0x130 [5442621.272303] [<ffffffff81b08002>] xen_start_kernel+0x55d/0x561 Update 3 I tried an i386 architecture instead of amd64, but got the same kernel panic. Also, it seems the Virtual Machine Manager pays attention to the format of the filename of the kernel; for the same kernel binary, I tried simply naming it vmlinuz-virtual, which threw out an error box about an invalid kernel. When I named it vmlinuz-2.6.35-23-virtual, it did not throw the error, but it did still result in the kernel panic shortly thereafter.

Read the article

CentOS - Configuring Puppet to play nice with SELinux

- by Mike Purcell

I am running into an issue every time I attempt to start the puppetmasterd service, for which I receive the following error message: root@service1 ~ # -> /etc/init.d/puppetmaster start Starting puppetmaster: Could not prepare for execution: Got 1 failure(s) while initializing: change from absent to directory failed: Could not set 'directory on ensure: Permission denied - /etc/puppet/ssl [FAILED] Apparently there was a known issue with this scenario as outlined in this bug report, however in the bug report it states the issue has been resolved in selinux-policy-3.9.16-29.fc15, but the latest CentOS default upstream version is 3.7.19-155.el6_3.4. So I am trying to figure out the best solution. I can either create a local security policy to allow puppetmasterd the access it needs, or keep researching and install a newer version of selinux-policy outside of the default upstream channel. Anyone have any recommendations? Please don't recommend disabling SELinux... ----- Update ----- Here is the puppet.conf: [main] # The Puppet log directory. # The default value is '$vardir/log'. logdir = /var/log/puppet # Where Puppet PID files are kept. # The default value is '$vardir/run'. rundir = /var/run/puppet # Where SSL certificates are kept. # The default value is '$confdir/ssl'. ssldir = $vardir/ssl [master] certname=puppetmaster.ownij.lan dns_alt_names=puppetmaster.ownij.lan [agent] # The file in which puppetd stores a list of the classes # associated with the retrieved configuratiion. Can be loaded in # the separate ``puppet`` executable using the ``--loadclasses`` # option. # The default value is '$confdir/classes.txt'. classfile = $vardir/classes.txt # Where puppetd caches the local configuration. An # extension indicating the cache format is added automatically. # The default value is '$confdir/localconfig'. localconfig = $vardir/localconfig server=puppetmaster.ownij.lan And here are the denials per the audit log: type=AVC msg=audit(1349751364.985:666): avc: denied { search } for pid=15093 comm="puppetmasterd" name="/" dev=dm-2 ino=2 scontext=unconfined_u:system_r:puppetmaster_t:s0 tcontext=system_u:object_r:home_root_t:s0 tclass=dir type=SYSCALL msg=audit(1349751364.985:666): arch=c000003e syscall=4 success=no exit=-13 a0=1391420 a1=7fffef09ed10 a2=7fffef09ed10 a3=120c500 items=0 ppid=15092 pid=15093 auid=500 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=pts1 ses=13 comm="puppetmasterd" exe="/usr/bin/ruby" subj=unconfined_u:system_r:puppetmaster_t:s0 key=(null) type=AVC msg=audit(1349751365.302:667): avc: denied { search } for pid=15093 comm="puppetmasterd" name="/" dev=dm-2 ino=2 scontext=unconfined_u:system_r:puppetmaster_t:s0 tcontext=system_u:object_r:home_root_t:s0 tclass=dir type=SYSCALL msg=audit(1349751365.302:667): arch=c000003e syscall=4 success=no exit=-13 a0=1d18530 a1=7fffef0d04d0 a2=7fffef0d04d0 a3=8 items=0 ppid=15092 pid=15093 auid=500 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=pts1 ses=13 comm="puppetmasterd" exe="/usr/bin/ruby" subj=unconfined_u:system_r:puppetmaster_t:s0 key=(null) type=AVC msg=audit(1349751365.465:668): avc: denied { search } for pid=15093 comm="puppetmasterd" name="/" dev=dm-2 ino=2 scontext=unconfined_u:system_r:puppetmaster_t:s0 tcontext=system_u:object_r:home_root_t:s0 tclass=dir type=SYSCALL msg=audit(1349751365.465:668): arch=c000003e syscall=4 success=no exit=-13 a0=1af3930 a1=7fffef0c5c70 a2=7fffef0c5c70 a3=8 items=0 ppid=15092 pid=15093 auid=500 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=pts1 ses=13 comm="puppetmasterd" exe="/usr/bin/ruby" subj=unconfined_u:system_r:puppetmaster_t:s0 key=(null) type=AVC msg=audit(1349751365.467:669): avc: denied { search } for pid=15093 comm="puppetmasterd" name="/" dev=dm-2 ino=2 scontext=unconfined_u:system_r:puppetmaster_t:s0 tcontext=system_u:object_r:home_root_t:s0 tclass=dir type=SYSCALL msg=audit(1349751365.467:669): arch=c000003e syscall=4 success=no exit=-13 a0=1b17aa0 a1=7fffef0c5c70 a2=7fffef0c5c70 a3=8 items=0 ppid=15092 pid=15093 auid=500 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=pts1 ses=13 comm="puppetmasterd" exe="/usr/bin/ruby" subj=unconfined_u:system_r:puppetmaster_t:s0 key=(null) type=AVC msg=audit(1349751366.401:670): avc: denied { write } for pid=15093 comm="puppetmasterd" name="puppet" dev=dm-0 ino=132035 scontext=unconfined_u:system_r:puppetmaster_t:s0 tcontext=system_u:object_r:puppet_etc_t:s0 tclass=dir type=SYSCALL msg=audit(1349751366.401:670): arch=c000003e syscall=83 success=no exit=-13 a0=2d7a400 a1=1f9 a2=2d7a40f a3=7fffef0a6df0 items=0 ppid=15092 pid=15093 auid=500 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=pts1 ses=13 comm="puppetmasterd" exe="/usr/bin/ruby" subj=unconfined_u:system_r:puppetmaster_t:s0 key=(null) And the audit log if I pass through audit2allow: root@service1 ~ # -> fgrep puppetmasterd /var/log/audit/audit.log | audit2allow -m puppetmasterd module puppetmasterd 1.0; require { type home_root_t; type puppetmaster_t; type puppet_etc_t; type puppet_var_run_t; type httpd_sys_content_t; class lnk_file { relabelfrom relabelto }; class file { relabelfrom read getattr open }; class dir { write read search getattr setattr }; } #============= puppetmaster_t ============== allow puppetmaster_t home_root_t:dir { search getattr }; allow puppetmaster_t httpd_sys_content_t:dir read; allow puppetmaster_t httpd_sys_content_t:file { read getattr open }; #!!!! The source type 'puppetmaster_t' can write to a 'dir' of the following types: # puppet_log_t, puppet_var_lib_t, puppet_var_run_t, puppetmaster_tmp_t allow puppetmaster_t puppet_etc_t:dir { write setattr }; allow puppetmaster_t puppet_etc_t:lnk_file { relabelfrom relabelto }; allow puppetmaster_t puppet_var_run_t:file relabelfrom;

Read the article

Nginx & Apache Cannot get try_files to work with permalinks

- by tcherokee

I have been working on this for the past two weeks not and for some reason I cannot seem to get nginx's try_files to work with my wordpress permalinks. I am hoping someone will be able to tell me where I am going wrong and also hopefully tell me if I made any major errors with my configurations as well (I am an nginx newbie... but learning :) ). Here are my Configuration files nginx.conf user www-data; worker_processes 4; pid /var/run/nginx.pid; events { worker_connections 768; # multi_accept on; } http { ## # Basic Settings ## sendfile on; tcp_nopush on; tcp_nodelay on; keepalive_timeout 65; types_hash_max_size 2048; # server_tokens off; # server_names_hash_bucket_size 64; # server_name_in_redirect off; include /etc/nginx/mime.types; default_type application/octet-stream; ## # Logging Settings ## # Defines the cache log format, cache log location # and the main access log location. log_format cache '***$time_local ' '$upstream_cache_status ' 'Cache-Control: $upstream_http_cache_control ' 'Expires: $upstream_http_expires ' '$host ' '"$request" ($status) ' '"$http_user_agent" ' ; access_log /var/log/nginx/access.log; error_log /var/log/nginx/error.log; include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; } mydomain.com.conf server { listen 123.456.78.901:80; # IP goes here. server_name www.mydomain.com mydomain.com; #root /var/www/mydomain.com/prod; index index.php; ## mydomain.com -> www.mydomain.com (301 - Permanent) if ($host !~* ^(www|dev)) { rewrite ^/(.*)$ $scheme://www.$host/$1 permanent; } # Add trailing slash to */wp-admin requests. rewrite /wp-admin$ $scheme://$host$uri/ permanent; # All media (including uploaded) is under wp-content/ so # instead of caching the response from apache, we're just # going to use nginx to serve directly from there. location ~* ^/(wp-content|wp-includes)/(.*)\.(jpg|png|gif|jpeg|css|js|m$ root /var/www/mydomain.com/prod; } # Don't cache these pages. location ~* ^/(wp-admin|wp-login.php) { proxy_pass http://backend; } location / { if ($http_cookie ~* "wordpress_logged_in_[^=]*=([^%]+)%7C") { set $do_not_cache 1; } proxy_cache_key "$scheme://$host$request_uri $do_not_cache"; proxy_cache main; proxy_pass http://backend; proxy_cache_valid 30m; # 200, 301 and 302 will be cached. # Fallback to stale cache on certain errors. # 503 is deliberately missing, if we're down for maintenance # we want the page to display. #try_files $uri $uri/ /index.php?q=$uri$args; #try_files $uri =404; proxy_cache_use_stale error timeout invalid_header http_500 http_502 http_504 http_404; } # Cache purge URL - works in tandem with WP plugin. # location ~ /purge(/.*) { # proxy_cache_purge main "$scheme://$host$1"; # } # No access to .htaccess files. location ~ /\.ht { deny all; } } # End server gzip.conf # Gzip Configuration. gzip on; gzip_disable msie6; gzip_static on; gzip_comp_level 4; gzip_proxied any; gzip_types text/plain text/css application/x-javascript text/xml application/xml application/xml+rss text/javascript; proxy.conf # Set proxy headers for the passthrough proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_max_temp_file_size 0; client_max_body_size 10m; client_body_buffer_size 128k; proxy_connect_timeout 90; proxy_send_timeout 90; proxy_read_timeout 90; proxy_buffer_size 4k; proxy_buffers 4 32k; proxy_busy_buffers_size 64k; proxy_temp_file_write_size 64k; add_header X-Cache-Status $upstream_cache_status; backend.conf upstream backend { # Defines backends. # Extracting here makes it easier to load balance # in the future. Needs to be specific IP as Plesk # doesn't have Apache listening on localhost. ip_hash; server 127.0.0.1:8001; # IP goes here. } cache.conf # Proxy cache and temp configuration. proxy_cache_path /var/www/nginx_cache levels=1:2 keys_zone=main:10m max_size=1g inactive=30m; proxy_temp_path /var/www/nginx_temp; proxy_cache_key "$scheme://$host$request_uri"; proxy_redirect off; # Cache different return codes for different lengths of time # We cached normal pages for 10 minutes proxy_cache_valid 200 302 10m; proxy_cache_valid 404 1m; The two commented out try_files in location \ of the mydomain config files are the ones I tried. This error I found in the error log can be found below. ...rewrite or internal redirection cycle while internally redirecting to "/index.php" Thanks in advance

Read the article

How do I determine what Excel-2007 is removing when it repairs my file?

- by sage

Summary: Excel repairs my file, tells me what was removed, I go into the xml/zip structure to investigate, and I cannot figure out what was changed. Does anybody know what I can do to better understand what Excel changed? Is it futile to try to determine? It feels like this should be possible and like I'm almost there... Details: When I open a file that I have renamed unnamed.xlsm, I receive the following notice: "Excel found unreadable content in 'unnamed.xlsm'. Do you want to recover the contents of this workbook? If you trust the sounce of this workbook, click Yes." I know the file is safe, I click yes, and I receive a message that "Excel was able to open the file by repairing or removing the unreadable content." It provides the following summary, but also provides an xml file which seems to contain the same content so I did not show it. Summary: Removed Records: Shared formula from /xl/worksheets/sheet3.xml part Removed Records: Formula from /xl/calcChain.xml part (Calculation properties) In order to determine issue, I have created a copy of the offending file, renamed it to have a '.zip' ending, opened up the files that Excel says it modified (sheet3), and perused the xml content, but this was not informative. I tried saving the repaired file and doing a simple diff on the xml for sheet3, but there are many changes and this is not informative either. I did the same thing for calcChain.xml and this was more useful. After saving the displayed xml with line breaks in text format, it was easy to identify the items that have been removed, but now I want to make sense of them. Perhaps they give clues of what happened to shee3. The following comparison is long, but I don't know if the entire train of differences is relevant. FILE COMPARISON Produced: 1-7-2011 2:42:26 PM Mode: Just Differences Left file: u:\My Documents\[redacted]\calcChain_orig.xml Right file: u:\My Documents\[redacted]\calcChain_rep.xml 812 <c r="H18" i="8" /> <> 812 <c r="N2" i="8" /> 814 <c r="G18" /> +- 816 <c r="D19" /> +- 818 <c r="F19" /> +- 820 <c r="E18" /> +- 822 <c r="N2" i="8" /> +- 824 <c r="H18" /> +- -+ 820 <c r="H15" /> 821 <c r="H13" /> 822 <c r="O19" /> 823 <c r="O17" /> 824 <c r="O15" /> 825 <c r="M19" /> 826 <c r="M17" /> 827 <c r="M15" /> 828 <c r="M13" /> 829 <c r="J19" /> 830 <c r="J17" /> 831 <c r="J15" /> 832 <c r="J13" /> 833 <c r="O14" /> 834 <c r="H18" i="8" /> 835 <c r="G18" /> 836 <c r="D19" i="5" /> 837 <c r="F19" /> 838 <c r="E18" i="8" /> 839 <c r="H18" i="9" /> 827 <c r="H15" /> +- 829 <c r="H13" /> +- 831 <c r="O19" /> +- 833 <c r="O17" /> +- 835 <c r="O15" /> +- 837 <c r="M19" /> +- 839 <c r="M17" /> +- 841 <c r="M15" /> +- 843 <c r="M13" /> +- 845 <c r="J19" /> +- 847 <c r="J17" /> +- 849 <c r="J15" /> +- 851 <c r="J13" /> +- 853 <c r="O14" /> +- 1209 <c r="H48" /> +- 1210 <c r="H62" />

Read the article

Linux/Apache performance very slow even on local network

- by klausch

I have an Ubuntu server machine running Apache and MYSQL. System and version info is as follows: Linux kernel 3.0.0.-12 Apache/2.2.20 MySQL Ver 14.14.Distrib 5.1.58 I am running a few websites on this server, some HTML only, some PHP/MySQL. THe [problem is that response time is very slow, both on static as well as the dynamic sites. Sometimes it takes more than 10 seconds before a response is given, this makes the sites very slow and almost unusable. The problem occurs even when requesting from the local network. I have added the involved subdomains to my /etc/hosts file, and abolve all the problem is not solved by using IP numbers instead of URL's. So there is no DNS lookup issue. I have modified the log format by showing the response times and sometimes a files takes 12 seconds to be served, see the jquery~.js file in the example screenshot. I have no explanation for this extremely long response time, but is is not even the only issue here, some other files takes a long time to be served too, but do not show a long response time in the log file. So probably different tissues are involved here. I cannot find a solution until now, any suggestions??? THanx in advance, Klaas link to screenshot picture from access logfile Some extra configuration info: apache2.conf (comment is removed) LockFile ${APACHE_LOCK_DIR}/accept.lock PidFile ${APACHE_PID_FILE} Timeout 300 KeepAlive On MaxKeepAliveRequests 100 KeepAliveTimeout 5 <IfModule mpm_prefork_module> StartServers 5 MinSpareServers 5 MaxSpareServers 10 MaxClients 150 MaxRequestsPerChild 0 </IfModule> <IfModule mpm_worker_module> StartServers 2 MinSpareThreads 25 MaxSpareThreads 75 ThreadLimit 64 ThreadsPerChild 25 MaxClients 150 MaxRequestsPerChild 0 </IfModule> <IfModule mpm_event_module> StartServers 2 MinSpareThreads 25 MaxSpareThreads 75 ThreadLimit 64 ThreadsPerChild 25 MaxClients 150 MaxRequestsPerChild 0 </IfModule> User ${APACHE_RUN_USER} Group ${APACHE_RUN_GROUP} AccessFileName .htaccess <Files ~ "^\.ht"> Order allow,deny Deny from all Satisfy all </Files> DefaultType text/plain HostnameLookups Off ErrorLog ${APACHE_LOG_DIR}/error.log LogLevel warn Include mods-enabled/*.load Include mods-enabled/*.conf Include httpd.conf Include ports.conf LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\" %T/%D" combined LogFormat "%h %l %u %t \"%r\" %>s %O" common LogFormat "%{Referer}i -> %U" referer LogFormat "%{User-agent}i" agent Include conf.d/ Include sites-enabled/ And the virtual hostfile for one of the slow sites, in fact it is pretty straightforward... <VirtualHost *:80> ServerAdmin [email protected] ServerSignature EMail ServerName toenjoy.drsklaus.nl DocumentRoot /var/www/toenjoy.drsklaus.nl <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/toenjoy.drsklaus.nl/> Options Indexes FollowSymLinks MultiViews AllowOverride AuthConfig AuthType Basic AuthName "To Enjoy" AuthUserFile /etc/.htpasswd Require user petraaa Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost> And the output of free -m: klaas@ubuntu-server:/etc/apache2$ free -m total used free shared buffers cached Mem: 1997 1401 595 0 144 1017 -/+ buffers/cache: 238 1758 Swap: 2035 0 2035 and I have no indication that swapping occurs on the moments the site is slow. I have runned top and it does not appear to be a CPU issue. I have the impression that the spawning of a apache thread could maybe be the bottleneck but it is just a suggestion. Maybe this gives some extra information! EDIT: The problem seemed to be gone for some time but occurs again! And not only with Apache, also connecting using SSH takes a tremendous time, sometimes it takes up to 15 seconds before the keyphrase is asked for. Also scp works very slowly. The behavious is really unpredoctable and makes the server very hard to use. Any ideas...?

Read the article

What needs updating when moving a bootable Windows 7 (or Vista) partition?

- by SuperTempel

When I move a bootable NTFS partition with Windows on it to a different block offset, what needs updating to make it bootable again? In particular, here's what I tried: I have a disk with several partitions, one of which is the NTFS partition with Windows on it, and the disk uses the plain old MBR block 0 for the partitions layout (no more than 4 partitions). Now I format and partition a new, larger, disk. There I make room for the NTFS partition and copy the contents from the old disk's NTFS Windows partition into. And I make the partition "active". However, when I try to boot from this disk, I get a "read error" message immediately and the booting stops, the exact text is: A disk read error occurred Press Ctrl+Alt+Del to restart I verified that both disks have the same boot sector code in block 0. It seems to me that something else might need updating. I guess that somewhere there's a absolute block reference that I need to update, probably pointing to the next level loader or to the NT kernel. Update: I found this article going quite into the depth of what I want to know. However, it says to modify boot.ini, but I have Windows 7 installed here, where such things appear to have changed: No boot.ini but a folder called System Volume Information with GUID and other data in it that sounds related to my problem. Going to keep digging... Update 2: Thanks to the terrible looking but very informative website by starman, I was able to figure out the first step: The NTFS boot sector has a field for "hidden" sectors. This feld has to contain the sector number of the boot sector. This solves the "read error" message. Now, however, I get a "BOOTMGR is missing" error instead. Looks like there's another place where a block number has to be adjusted, but I can't find anything in the code listing about this. I do find a lot of help sites suggesting Windows tools for fixing this "BOOTMGR is missing" problem, but none seem to know what goes on behind the scenes. Kind of like suggesting to re-install Windows when there's a little problem with it. At least, those fixes seem to work, mostly involving the Bcdedit and Bootrec tools. Now, who knows what they do, especially the latter, in regards to a moved partition? Update 3: After lots of trial-and-error attempts, I believe now that the solution lies in the BCD-Template registry file, residing usually inside \Windows\System32\config. If I get this updated using the "bcdboot" command, Windows starts up from it. I am now in the middle of figuring out what information this registry contains relevant to the above question. Any pointers to the contents of this registry are welcome. Update 4: Turns out that while the BCD-Template file gets rewritten and has different binary contents than its predecessor, the values inside do not change. So it must be something else that bcdboot.exe writes. I had previously already checked if it changes the first 32 boot blocks of the partition, but they appear to remain unchanged. Parititon map doesn't get changed, either. So what is it that bcdboot modifies besides the BCD registry? Any tips on how I can trace that? Are there low level tools that show me what files a program writes to? Update 5: The answer seems to be: c:\Boot\BCD is also changed, and that appears to be the key file for the boot manager's process. I'll investigate this later... Update 6: It seems to be an important detail that I had originally two partitions created when I installed Windows 7: A small partition of 204800 sectors which appears to be a bootstrap partition, followed by the actual, large, partition containing the Windows system (drive C:). When I tried to transfer this installation to a new, larger, disk, I had kept the same two partitions intact on the new drive, although they ended up at a different offset. This alone led to the "BOOTMGR is missing" message. Since then, I've used bcdboot.exe only on the Windows partition, which added the \Boot\BCD file on that partition. That file (and folder) did originally only exist on the smaller partition. Hence, this problem may be more complicated in my case as one partition (the boot strapper) referred to another partition (the one containing the OS), whereas other people may only have to deal with one partition containing both, and maybe there the solution is simpler. Update 7: Found one more detail: The \Boot\BCD file records the MBR's serial number. If that number doesn't match, the system won't boot. Next I'll test if there's also an absolute block reference stored in there.

Read the article

How to decrypt an encrypted Apple iTunes iPhone backup?

- by afit

I've been asked by a number of unfortunate iPhone users to help them restore data from their iTunes backups. This is easy when they are unencrypted, but not when they are encrypted, whether or not the password is known. As such, I'm trying to figure out the encryption scheme used on mddata and mdinfo files when encrypted. I have no problems reading these files otherwise, and have built some robust C# libraries for doing so. (If you're able to help, I don't care which language you use. It's the principle I'm after here!) The Apple "iPhone OS Enterprise Deployment Guide" states that "Device backups can be stored in encrypted format by selecting the Encrypt iPhone Backup option in the device summary pane of iTunes. Files are encrypted using AES128 with a 256-bit key. The key is stored securely in the iPhone keychain." That's a pretty good clue, and there's some good info here on Stackoverflow on iPhone AES/Rijndael interoperability suggesting a keysize of 128 and CBC mode may be used. Aside from any other obfuscation, a key and initialisation vector (IV)/salt are required. One might assume that the key is a manipulation of the "backup password" that users are prompted to enter by iTunes and passed to "AppleMobileBackup.exe", padded in a fashion dictated by CBC. However, given the reference to the iPhone keychain, I wonder whether the "backup password" might not be used as a password on an X509 certificate or symmetric private key, and that the certificate or private key itself might be used as the key. (AES and the iTunes encrypt/decrypt process is symmetric.) The IV is another matter, and it could be a few things. Perhaps it's one of the keys hard-coded into iTunes, or into the devices themselves. Although Apple's comment above suggests the key is present on the device's keychain, I think this isn't that important. One can restore an encrypted backup to a different device, which suggests all information relevant to the decryption is present in the backup and iTunes configuration, and that anything solely on the device is irrelevant and replacable in this context. So where might be the key be? I've listed paths below from a Windows machine but it's much of a muchness whichever OS we use. The "\appdata\Roaming\Apple Computer\iTunes\itunesprefs.xml" contains a PList with a "Keychain" dict entry in it. The "\programdata\apple\Lockdown\09037027da8f4bdefdea97d706703ca034c88bab.plist" contains a PList with "DeviceCertificate", "HostCertificate", and "RootCertificate", all of which appear to be valid X509 certs. The same file also appears to contain asymmetric keys "RootPrivateKey" and "HostPrivateKey" (my reading suggests these might be PKCS #7-enveloped). Also, within each backup there are "AuthSignature" and "AuthData" values in the Manifest.plist file, although these appear to be rotated as each file gets incrementally backed up, suggested they're not that useful as a key, unless something really quite involved is being done. There's a lot of misleading stuff out there suggesting getting data from encrypted backups is easy. It's not, and to my knowledge it hasn't been done. Bypassing or disabling the backup encryption is another matter entirely, and is not what I'm looking to do. This isn't about hacking apart the iPhone or anything like that. All I'm after here is a means to extract data (photos, contacts, etc.) from encrypted iTunes backups as I can unencrypted ones. I've tried all sorts of permutations with the information I've put down above but got nowhere. I'd appreciate any thoughts or techniques I might have missed.

Read the article

JqGrid addJSONData + ASP.NET 2.0 WS

- by MilosC

Dear community ! I am a bit lost. I' ve tried to implement a solution based on JqGrid and tried to use function as datatype. I've setted all by the book i guess, i get WS invoked and get JASON back, I got succes on clientside in ajaf call and i "bind" jqGrid using addJSONData but grid remains empty. I do not have any glue now... other "local" samples on same pages works without a problem (jsonstring ...) My WS method looks like : [WebMethod] [ScriptMethod(ResponseFormat = ResponseFormat.Json)] public string GetGridData() { // Load a list InitSessionVariables(); SA.DB.DenarnaEnota.DenarnaEnotaDB db = new SAOP.SA.DB.DenarnaEnota.DenarnaEnotaDB(); DataSet ds = db.GetLookupForDenarnaEnota(SAOP.FW.DB.RecordStatus.All); // Turn into HTML friendly format GetGridData summaryList = new GetGridData(); summaryList.page = "1"; summaryList.total = "10"; summaryList.records = "160"; int i = 0; foreach (DataRow dr in ds.Tables[0].Rows) { GridRows row = new GridRows(); row.id = dr["DenarnaEnotaID"].ToString(); row.cell = "[" + "\"" + dr["DenarnaEnotaID"].ToString() + "\"" + "," + "\"" + dr["Kratica"].ToString() + "\"" + "," + "\"" + dr["Naziv"].ToString() + "\"" + "," + "\"" + dr["Sifra"].ToString() + "\"" + "]"; summaryList.rows.Add(row); } return JsonConvert.SerializeObject(summaryList); } my ASCX code is this: jQuery(document).ready(function(){ jQuery("#list").jqGrid({ datatype : function (postdata) { jQuery.ajax({ url:'../../AjaxWS/TemeljnicaEdit.asmx/GetGridData', data:'{}', dataType:'json', type: 'POST', contentType: "application/json; charset=utf-8", complete: function(jsondata,stat){ if(stat=="success") { var clearJson = jsondata.responseText; var thegrid = jQuery("#list")[0]; var myjsongrid = eval('('+clearJson+')'); alfs thegrid.addJSONData(myjsongrid.replace(/\\/g,'')); } } } ); }, colNames:['DenarnaEnotaID','Kratica', 'Sifra', 'Naziv'], colModel:[ {name:'DenarnaEnotaID',index:'DenarnaEnotaID', width:100}, {name:'Kratica',index:'Kratica', width:100}, {name:'Sifra',index:'Sifra', width:100}, {name:'Naziv',index:'Naziv', width:100}], rowNum:15, rowList:[15,30,100], pager: jQuery('#pager'), sortname: 'id', // loadtext:"Nalagam zapise...", // viewrecords: true, sortorder: "desc", // caption:"Vrstice", // width:"800", imgpath: "../Scripts/JGrid/themes/basic/images"}); }); from WS i GET JSON like this: {”page”:”1?,”total”:”10?,”records”:”160?,”rows”:[{"id":"18","cell":"["18","BAM","Konvertibilna marka","977"]“},{”id”:”19?,”cell”:”["19","RSD","Srbski dinar","941"]“},{”id”:”20?,”cell”:”["20","AFN","Afgani","971"]“},{”id”:”21?,”cell”:”["21","ALL","Lek","008"]“},{”id”:”22?,”cell”:”["22","DZD","Alžirski dinar","012"]“},{”id”:”23?,”cell”:”["23","AOA","Kvanza","973"]“},{”id”:”24?,”cell”:”["24","XCD","Vzhodnokaribski dolar","951"]“},{”id”:”25?,”cell”:” ……………… ["13","PLN","Poljski zlot","985"]“},{”id”:”14?,”cell”:”["14","SEK","Švedska krona","752"]“},{”id”:”15?,”cell”:”["15","SKK","Slovaška krona","703"]“},{”id”:”16?,”cell”:”["16","USD","Ameriški dolar","840"]“},{”id”:”17?,”cell”:”["17","XXX","Nobena valuta","000"]“},{”id”:”1?,”cell”:”["1","SIT","Slovenski tolar","705"]“}]} i have registered this js : clientSideScripts.RegisterClientScriptFile("prototype.js", CommonFunctions.FixupUrlWithoutSessionID("~/WebUI/Scripts/prototype-1.6.0.2.js")); clientSideScripts.RegisterClientScriptFile("jquery.js", CommonFunctions.FixupUrlWithoutSessionID("~/WebUI/Scripts/JGrid/jquery.js")); clientSideScripts.RegisterClientScriptFile("jquery.jqGrid.js", CommonFunctions.FixupUrlWithoutSessionID("~/WebUI/Scripts/JGrid/jquery.jqGrid.js")); clientSideScripts.RegisterClientScriptFile("jqModal.js", CommonFunctions.FixupUrlWithoutSessionID("~/WebUI/Scripts/JGrid/js/jqModal.js")); clientSideScripts.RegisterClientScriptFile("jqDnR.js", CommonFunctions.FixupUrlWithoutSessionID("~/WebUI/Scripts/JGrid/js/jqDnR.js")); Basical i think it must be something stupid ...but i can figure it out now... Help wanted.

Read the article

Set the JAXB context factory initialization class to be used

- by user1902288

I have updated our projects (Java EE based running on Websphere 8.5) to use a new release of a company internal framework (and Ejb 3.x deployment descriptors rather than the 2.x ones). Since then my integration Tests fail with the following exception: [java.lang.ClassNotFoundException: com.ibm.xml.xlxp2.jaxb.JAXBContextFactory] I can build the application with the previous framework release and everything works fine. While debugging i noticed that within the ContextFinder (javax.xml.bind) there are two different behaviours: Previous Version (Everything works just fine): None of the different places brings up a factory class so the default factory class gets loaded which is com.sun.xml.internal.bind.v2.ContextFactory (defined as String constant within the class). Upgraded Version (ClassNotFound): There is a resource "META-INF/services/javax.xml.bind.JAXBContext" beeing loaded successfully and the first line read makes the ContextFinder attempt to load "com.ibm.xml.xlxp2.jaxb.JAXBContextFactory" which causes the error. I now have two questions: What sort is that resource? Because inside our EAR there is two WARs and none of those two contains a folder services in its META-INF directory. Where could that value be from otherwise? Because a filediff showed me no new or changed properties files. No need to say i am going to read all about the JAXB configuration possibilities but if you have first insights on what could have gone wrong or help me out with that resource (is it a real file i have to look for?) id appreciate a lot. Many Thanks! EDIT (according to comments Input/Questions): Out of curiosity, does your framework include JAXB JARs? Did the old version of your framework include jaxb.properties? Indeed (i am a bit surprised) the framework has a customized eclipselink-2.4.1-.jar inside the EAR that includes both a JAXB implementation and a jaxb.properties file that shows the following entry in both versions (the one that finds the factory as well as in the one that throws the exception): javax.xml.bind.context.factory=org.eclipse.persistence.jaxb.JAXBContextFactory I think this is has nothing to do with the current issue since the jar stayed exactly the same in both EARs (the one that runs/ the one with the expection) It's also not clear to me why the old version of the framework was ever selecting the com.sun implementation There is a class javax.xml.bind.ContextFinder which is responsible for initializing the JAXBContextFactory. This class searches various placess for the existance of a jaxb.properties file or a "javax.xml.bind.JAXBContext" resource. If ALL of those places dont show up which Context Factory to use there is a deault factory loaded which is hardcoded in the class itself: private static final String PLATFORM_DEFAULT_FACTORY_CLASS = "com.sun.xml.internal.bind.v2.ContextFactory"; Now back to my problem: Building with the previous version of the framework (and EJB 2.x deployment descriptors) everything works fine). While debugging i can see that there is no configuration found and thatfore above mentioned default factory is loaded. Building with the new version of the framework (and EJB 3.x deployment descriptors so i can deploy) ONLY A TESTCASE fails but the rest of the functionality works (like i can send requests to our webservice and they dont trigger any errors). While debugging i can see that there is a configuration found. This resource is named "META-INF/services/javax.xml.bind.JAXBContext". Here are the most important lines of how this resource leads to the attempt to load 'com.ibm.xml.xlxp2.jaxb.JAXBContextFactory' which then throws the ClassNotFoundException. This is simplified source of the mentioned javax.xml.bind.ContextFinder class: URL resourceURL = ClassLoader.getSystemResource("META-INF/services/javax.xml.bind.JAXBContext"); BufferedReader r = new BufferedReader(new InputStreamReader(resourceURL.openStream(), "UTF-8")); String factoryClassName = r.readLine().trim(); The field factoryClassName now has the value 'com.ibm.xml.xlxp2.jaxb.JAXBContextFactory' (The day i understand how to format source code on stackoverflow will be my biggest step ahead.... sorry for the formatting after 20 mins it still looks the same :() Because this has become a super lager question i will also add a bounty :)

Read the article

C# Bind DataTable to Existing DataGridView Column Definitions

- by Timothy

I've been struggling with a NullReferenceException and hope someone here will be able to point me in the right direction. I'm trying to create and populate a DataTable and then show the results in a DataGridView control. The basic code follows, and Execution stops with a NullReferenceException at the point where I invoke the new UpdateResults_Delegate. Oddly enough, I can trace entries.Rows.Count successfully before I return it from QueryEventEntries, so I can at least show 1) entries is not a null reference, and 2) the DataTable contains rows of data. I know I have to be doing something wrong, but I just don't know what. private void UpdateResults(DataTable entries) { dataGridView.DataSource = entries; } private void button_Click(object sender, EventArgs e) { PerformQuery(); } private void PerformQuery() { DateTime start = new DateTime(dateTimePicker1.Value.Year, dateTimePicker1.Value.Month, dateTimePicker1.Value.Day, 0, 0, 0); DateTime stop = new DateTime(dateTimePicker2.Value.Year, dateTimePicker2.Value.Month, dateTimePicker2.Value.Day, 0, 0, 0); DataTable entries = QueryEventEntries(start, stop); UpdateResults(entries); } private DataTable QueryEventEntries(DateTime start, DateTime stop) { DataTable entries = new DataTable(); entries.Columns.AddRange(new DataColumn[] { new DataColumn("event_type", typeof(Int32)), new DataColumn("event_time", typeof(DateTime)), new DataColumn("event_detail", typeof(String))}); using (SqlConnection conn = new SqlConnection(DSN)) { using (SqlDataAdapter adapter = new SqlDataAdapter( "SELECT event_type, event_time, event_detail FROM event_log " + "WHERE event_time >= @start AND event_time <= @stop", conn)) { adapter.SelectCommand.Parameters.AddRange(new Object[] { new SqlParameter("@start", start), new SqlParameter("@stop", stop)}); adapter.Fill(entries); } } return entries; } Update I'd like to summarize and provide some additional information I've learned from the discussion here and debugging efforts since I originally posted this question. I am refactoring old code that retrieved records from a database, collected those records as an array, and then later iterated through the array to populate a DataGridView row by row. Threading was originally implemented to compensate and keep the UI responsive during the unnecessary looping. I have since stripped out Thread/Invoke; everything now occurs on the same execution thread (thank you, Sam). I am attempting to replace the slow, unwieldy approach using a DataTable which I can fill with a DataAdapter, and assign to the DataGridView through it's DataSource property (above code updated). I've iterated through the entries DataTable's rows to verify the table contains the expected data before assigning it as the DataGridView's DataSource. foreach (DataRow row in entries.Rows) { System.Diagnostics.Trace.WriteLine( String.Format("{0} {1} {2}", row[0], row[1], row[2])); } One of the column of the DataGridView is a custom DataGridViewColumn to stylize the event_type value. I apologize I didn't mention this before in the original post but I wasn't aware it was important to my problem. I have converted this column temporarily to a standard DataGridViewTextBoxColumn control and am no longer experiencing the Exception. The fields in the DataTable are appended to the list of fields that have been pre-specified in Design view of the DataGridView. The records' values are being populated in these appended fields. When the run time attempts to render the cell a null value is provided (as the value that should be rendered is done so a couple columns over). In light of this, I am re-titling and re-tagging the question. I would still appreciate it if others who have experienced this can instruct me on how to go about binding the DataTable to the existing column definitions of the DataGridView.

Read the article

Parse JSON in C#

- by Ender

I'm trying to parse some JSON data from the Google AJAX Search API. I have this URL and I'd like to break it down so that the results are displayed. I've currently written this code, but I'm pretty lost in regards of what to do next, although there are a number of examples out there with simplified JSON strings. Being new to C# and .NET in general I've struggled to get a genuine text output for my ASP.NET page so I've been recommended to give JSON.NET a try. Could anyone point me in the right direction to just simply writing some code that'll take in JSON from the Google AJAX Search API and print it out to the screen? EDIT: I think I've made some progress in regards to getting some code working using DataContractJsonSerializer. Here is the code I have so far. Any advice on whether this is close to working and/or how I would output my results in a clean format? EDIT 2: I've followed the advice from Dreas Grech and the StackOverflowException has gone. However, now I am getting no output. Any ideas on where to go next? EDIT 3: ALL FIXED! All results are working fine. Thank you again Dreas Grech! using System; using System.Data; using System.Configuration; using System.Web; using System.Web.Security; using System.Web.UI; using System.Web.UI.WebControls; using System.Web.UI.WebControls.WebParts; using System.Web.UI.HtmlControls; using System.ServiceModel.Web; using System.Runtime.Serialization; using System.Runtime.Serialization.Json; using System.IO; using System.Text; public partial class _Default : System.Web.UI.Page { protected void Page_Load(object sender, EventArgs e) { GoogleSearchResults g1 = new GoogleSearchResults(); const string json = @"{""responseData"": {""results"":[{""GsearchResultClass"":""GwebSearch"",""unescapedUrl"":""http://www.cheese.com/"",""url"":""http://www.cheese.com/"",""visibleUrl"":""www.cheese.com"",""cacheUrl"":""http://www.google.com/search?q\u003dcache:bkg1gwNt8u4J:www.cheese.com"",""title"":""\u003cb\u003eCHEESE\u003c/b\u003e.COM - All about \u003cb\u003echeese\u003c/b\u003e!."",""titleNoFormatting"":""CHEESE.COM - All about cheese!."",""content"":""\u003cb\u003eCheese\u003c/b\u003e - everything you want to know about it. Search \u003cb\u003echeese\u003c/b\u003e by name, by types of milk, by textures and by countries.""},{""GsearchResultClass"":""GwebSearch"",""unescapedUrl"":""http://en.wikipedia.org/wiki/Cheese"",""url"":""http://en.wikipedia.org/wiki/Cheese"",""visibleUrl"":""en.wikipedia.org"",""cacheUrl"":""http://www.google.com/search?q\u003dcache:n9icdgMlCXIJ:en.wikipedia.org"",""title"":""\u003cb\u003eCheese\u003c/b\u003e - Wikipedia, the free encyclopedia"",""titleNoFormatting"":""Cheese - Wikipedia, the free encyclopedia"",""content"":""\u003cb\u003eCheese\u003c/b\u003e is a food consisting of proteins and fat from milk, usually the milk of cows, buffalo, goats, or sheep. It is produced by coagulation of the milk \u003cb\u003e...\u003c/b\u003e""},{""GsearchResultClass"":""GwebSearch"",""unescapedUrl"":""http://www.ilovecheese.com/"",""url"":""http://www.ilovecheese.com/"",""visibleUrl"":""www.ilovecheese.com"",""cacheUrl"":""http://www.google.com/search?q\u003dcache:GBhRR8ytMhQJ:www.ilovecheese.com"",""title"":""I Love \u003cb\u003eCheese\u003c/b\u003e!, Homepage"",""titleNoFormatting"":""I Love Cheese!, Homepage"",""content"":""The American Dairy Association\u0026#39;s official site includes recipes and information on nutrition and storage of \u003cb\u003echeese\u003c/b\u003e.""},{""GsearchResultClass"":""GwebSearch"",""unescapedUrl"":""http://www.gnome.org/projects/cheese/"",""url"":""http://www.g

Read the article

Split a long JSON string into lines in Ruby

- by David J.

Read the article

jQuery Validate - require at least one field in a group to be filled

- by Nathan Long

I'm using the excellent jQuery Validate Plugin to validate some forms. On one form, I need to ensure that the user fills in at least one of a group of fields. I think I've got a pretty good solution, and wanted to share it. Please suggest any improvements you can think of. Finding no built-in way to do this, I searched and found Rebecca Murphey's custom validation method, which was very helpful. I improved this in three ways: To let you pass in a selector for the group of fields To let you specify how many of that group must be filled for validation to pass To show all inputs in the group as passing validation as soon as one of them passes validation. So you can say "at least X inputs that match selector Y must be filled." The end result is a rule like this: partnumber: { require_from_group: [2,".productinfo"] } //The partnumber input will validate if //at least 2 `.productinfo` inputs are filled For best results, put this rule AFTER any formatting rules for that field (like "must contain only numbers", etc). This way, if the user gets an error from this rule and starts filling out one of the fields, they will get immediate feedback about the formatting required without having to fill another field first. Item #3 assumes that you're adding a class of .checked to your error messages upon successful validation. You can do this as follows, as demonstrated here. success: function(label) { label.html(" ").addClass("checked"); } As in the demo linked above, I use CSS to give each span.error an X image as its background, unless it has the class .checked, in which case it gets a check mark image. Here's my code so far: jQuery.validator.addMethod("require_from_group", function(value, element, options) { // From the options array, find out what selector matches // our group of inputs and how many of them should be filled. numberRequired = options[0]; selector = options[1]; var commonParent = $(element).parents('form'); var numberFilled = 0; commonParent.find(selector).each(function(){ // Look through fields matching our selector and total up // how many of them have been filled if ($(this).val()) { numberFilled++; } }); if (numberFilled >= numberRequired) { // This part is a bit of a hack - we make these // fields look like they've passed validation by // hiding their error messages, etc. Strictly speaking, // they haven't been re-validated, though, so it's possible // that we're hiding another validation problem. But there's // no way (that I know of) to trigger actual re-validation, // and in any case, any other errors will pop back up when // the user tries to submit the form. // If anyone knows a way to re-validate, please comment. // // For imputs matching our selector, remove error class // from their text. commonParent.find(selector).removeClass('error'); // Also look for inserted error messages and mark them // with class 'checked' var remainingErrors = commonParent.find(selector) .next('label.error').not('.checked'); remainingErrors.text("").addClass('checked'); // Tell the Validate plugin that this test passed return true; } // The {0} in the next line is the 0th item in the options array }, jQuery.format("Please fill out at least {0} of these fields.")); Questions? Comments?

Read the article

SMO ConnectionContext.StatementTimeout setting is ignored

- by Woody

I am successfully using Powershell with SMO to backup most databases. However, I have several large databases in which I receive a "timeout" error "System.Data.SqlClient.SqlException: Timeout expired". The timout consistently occurs at 10 minutes. I have tried setting ConnectionContext.StatementTimeout to 0, 6000, and to [System.Int32]::MaxValue. The setting made no difference. I have found a number of Google references which indicate setting it to 0 makes it unlimited. No matter what I try, the timeouts consistently occur at 10 minutes. I even set Remote Query Timeout on the server to 0 (via Studio Manager) to no avail. Below is my SMO connection where I set the time out and the actual backup function. Further below is the output from my script. UPDATE Interestingly enough, I wrote the backup function in C# using VS 2008 and the timeout override does work within that environment. I am in the process of incorporating that C# process into my Powershell Script until I can find out why the timeout override does not work with just Powershell. This is extremely annoying! function New-SMOconnection { Param ($server, $ApplicationName= "PowerShell SMO", [int]$StatementTimeout = 0 ) # Write-Debug "Function: New-SMOconnection $server $connectionname $commandtimeout" if (test-path variable:\conn) { $conn.connectioncontext.disconnect() } else { $conn = New-Object('Microsoft.SqlServer.Management.Smo.Server') $server } $conn.connectioncontext.applicationName = $applicationName $conn.ConnectionContext.StatementTimeout = $StatementTimeout $conn.connectioncontext.Connect() $conn } $smo = New-SMOConnection -server $server if ($smo.connectioncontext.isopen -eq $false) { Throw "Could not connect to server $($server)." } Function Backup-Database { Param([string]$dbname) $db = $smo.Databases.get_Item($dbname) if (!$db) {"Database $dbname was not found"; Return} $sqldir = $smo.Settings.BackupDirectory + "\$($smo.name -replace ("\\", "$"))" $s = ($server.Split('\'))[0] $basedir = "\\$s\" + $($sqldir -replace (":", "$")) $dt = get-date -format yyyyMMdd-HHmmss $dbbk = new-object ('Microsoft.SqlServer.Management.Smo.Backup') $dbbk.Action = 'Database' $dbbk.BackupSetDescription = "Full backup of " + $dbname $dbbk.BackupSetName = $dbname + " Backup" $dbbk.Database = $dbname $dbbk.MediaDescription = "Disk" $target = "$basedir\$dbname\FULL" if (-not(Test-Path $target)) { New-Item $target -ItemType directory | Out-Null} $device = "$sqldir\$dbname\FULL\" + $($server -replace("\\", "$")) + "_" + $dbname + "_FULL_" + $dt + ".bak" $dbbk.Devices.AddDevice($device, 'File') $dbbk.Initialize = $True $dbbk.Incremental = $false $dbbk.LogTruncation = [Microsoft.SqlServer.Management.Smo.BackupTruncateLogType]::Truncate If (!$copyonly) { If ($kill) {$smo.KillAllProcesses($dbname)} $dbbk.SqlBackupAsync($server) } $dbbk } Started SQL backups for server LCFSQLxxx\SQLxxx at 05/06/2010 15:33:16 Statement TimeOut value set to 0. DatabaseName : OperationsManagerDW StartBackupTime : 5/6/2010 3:33:16 PM EndBackupTime : 5/6/2010 3:43:17 PM StartCopyTime : 1/1/0001 12:00:00 AM EndCopyTime : 1/1/0001 12:00:00 AM CopiedFiles : Status : Failed ErrorMessage : System.Data.SqlClient.SqlException: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. The backup or restore was aborted. 10 percent processed. 20 percent processed. 30 percent processed. 40 percent processed. 50 percent processed. 60 percent processed. 70 percent processed. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(String sqlCommand, ExecutionTypes executionType) Ended backups at 05/06/2010 15:43:23

Read the article

Access, ADO & 64-bit

- by JTeagle

We have a large codebase that uses ADO under 32-bit, and we need to convert the code to 64-bit. We were using the Jet provider, but I know this is not supported under x64. We're importing definitions from msado15.dll. As of a while ago a 64-bit version of this DLL became available, but we are unable to get it to work. I have written a test program as follows (MFC, using the #imported DLL): map<CString, CString> mapResults ; _ConnectionPtr pConn = NULL ; CString strConn = _T("Provider=Microsoft.ACE.OLEDB.14.0;") _T("Data Source=c:\\program files\\our_company\\our_database.mdb;"); // (Above string only split for readability here.) CString strSQL = _T("SELECT * FROM [our_table] ORDER BY [our_field_1];"); try { pConn.CreateInstance(__uuidof(Connection) ); pConn->Open(_bstr_t(strConn), _bstr_t(_T("") ), _bstr_t(_T("") ), -1); _CommandPtr pCommand = NULL; pCommand.CreateInstance(__uuidof(Command) ); pCommand->CommandType = adCmdText ; pCommand->ActiveConnection = pConn ; pCommand->CommandText = _bstr_t(strSQL); _RecordsetPtr pRS = NULL ; pRS.CreateInstance(__uuidof(Recordset) ); pRS->CursorLocation = adUseClient ; pRS = pCommand->Execute(NULL, NULL, adCmdText); while (pRS->adoEOF != VARIANT_TRUE) { CString strField = (LPCTSTR)(_bstr_t)pRS->Fields->GetItem( (_bstr_t)_T("our_field_1") )->Value ; CString strValue = (LPCTSTR)(_bstr_t)pRS->Fields->GetItem( (_bstr_t)_T("our_field_2") )->Value ; mapResults[strField] = strValue ; pRS->MoveNext(); } } catch(_com_error &e) { CString strError ; strError.Format(_T("Error %08x: %s"),(int)e.Error(), e.ErrorMessage() ); mapResults[_T("COM error") ] = strError ; } Basically, the code will list the table if it succeeds, or list the COM error obtained if it fails. Obviously, we tested the code under 32 bit and got the desired results. On the 64-bit machine, the code explicitly imports from the known 64-bit version of msado15.dll (v6.1.7600.nnn). The machine has had the Office Data Providers (AccessDatabaseEngine_x64.exe) applied to get the new ACE drivers (ACEODBC.DLL, v14.nnn.nnn.nnn). If I look at Data Source under Administrator Tools (I know ODBC isn't the same as ADO, it was just to confirm the DLL was installed correctly), it shows the expected DLL. I can even confirm, using Process Explorer, that the version of msado15.dll it loads at run time (thus confirming that COM is finding the ADO dll) is the 64-bit version. I believe we have MDAC 2.8 installed (we have msado28.tlb in the same place as msado15.dll, but that might have been installed by AccessDatabaseEngine_x64.exe). The test machine is Windows 7 Ultimate, 64-bit. The test code was recompiled on that machine using VS2008 for x64 in full Release and run externally. And yet, we still get COM error 0x800a0e7a (Provider not found). Is there anything any one can suggest as to why this isn't working, or what further tests / checks I can perform to verify that I have all the right stuff on the machine (and thus, that it should work)? I know that ODBC will work under x64 (tried the test program using that) but rewriting our code base for ODBC would be undesirable!

Read the article

WPF Layout algorithm woes - control will resize, but not below some arbitrary value.

- by Quantumplation

I'm working on an application for a client, and one of the requirements is the ability to make appointments, and display the current week's appointments in a visual format, much like in Google Calender's or Microsoft Office. I found a great (3 part) article on codeproject, in which he builds a "RangePanel", and composes one for each "period" (for example, the work day.) You can find part 1 here: http://www.codeproject.com/KB/WPF/OutlookWpfCalendarPart1.aspx The code presents, but seems to choose an arbitrary height value overall (440.04), and won't resize below that without clipping. What I mean to say, is that the window/container will resize, but it just cuts off the bottom of the control, instead of recalculating the height of the range panels, and the controls in the range panels representing the appointment. It will resize and recalculate for greater values, but not less. Code-wise, what's happening is that when you resize below that value, first the "MeasureOverride" is called with the correct "new height". However, by the time the "ArrangeOverride" method is called, it's passing the same 440.04 value as the height to arrange to. I need to find a solution/workaround, but any information that you can provide that might direct me for things to look into would also be greatly appreciated ( I understand how frustrating it is to debug code when you don't have the codebase in front of you. :) ) The code for the various Arrange and Measure functions are provided below. The "CalendarView" control has a "CalendarViewContentPresenter", which handles several periods. Then, the periods have a "CalendarPeriodContentPresenter", which handles each "block" of appointments. Finally, the "RangePanel" has it's own implementation. (To be honest, i'm still a bit hazy on how the control works, so if my explanations are a bit hazy, the article I linked probably has a more cogent explanation. :) ) CalendarViewContentPresenter: protected override Size ArrangeOverride(Size finalSize) { int columnCount = this.CalendarView.Periods.Count; Size columnSize = new Size(finalSize.Width / columnCount, finalSize.Height); double elementX = 0; foreach (UIElement element in this.visualChildren) { element.Arrange(new Rect(new Point(elementX, 0), columnSize)); elementX = elementX + columnSize.Width; } return finalSize; } protected override Size MeasureOverride(Size constraint) { this.GenerateVisualChildren(); this.GenerateListViewItemVisuals(); // If it's coming back infinity, just return some value. if (constraint.Width == Double.PositiveInfinity) constraint.Width = 10; if (constraint.Height == Double.PositiveInfinity) constraint.Height = 10; return constraint; } CalendarViewPeriodPersenter: protected override Size ArrangeOverride(Size finalSize) { foreach (UIElement element in this.visualChildren) { element.Arrange(new Rect(new Point(0, 0), finalSize)); } return finalSize; } protected override Size MeasureOverride(Size constraint) { this.GenerateVisualChildren(); return constraint; } RangePanel: protected override Size ArrangeOverride(Size finalSize) { double containerRange = (this.Maximum - this.Minimum); foreach (UIElement element in this.Children) { double begin = (double)element.GetValue(RangePanel.BeginProperty); double end = (double)element.GetValue(RangePanel.EndProperty); double elementRange = end - begin; Size size = new Size(); size.Width = (Orientation == Orientation.Vertical) ? finalSize.Width : elementRange / containerRange * finalSize.Width; size.Height = (Orientation == Orientation.Vertical) ? elementRange / containerRange * finalSize.Height : finalSize.Height; Point location = new Point(); location.X = (Orientation == Orientation.Vertical) ? 0 : (begin - this.Minimum) / containerRange * finalSize.Width; location.Y = (Orientation == Orientation.Vertical) ? (begin - this.Minimum) / containerRange * finalSize.Height : 0; element.Arrange(new Rect(location, size)); } return finalSize; } protected override Size MeasureOverride(Size availableSize) { foreach (UIElement element in this.Children) { element.Measure(availableSize); } // Constrain infinities if (availableSize.Width == double.PositiveInfinity) availableSize.Width = 10; if (availableSize.Height == double.PositiveInfinity) availableSize.Height = 10; return availableSize; }

Read the article

Loading PNGs into OpenGL performance issues - Java & JOGL much slower than C# & Tao.OpenGL

- by Edward Cresswell

I am noticing a large performance difference between Java & JOGL and C# & Tao.OpenGL when both loading PNGs from storage into memory, and when loading that BufferedImage (java) or Bitmap (C# - both are PNGs on hard drive) 'into' OpenGL. This difference is quite large, so I assumed I was doing something wrong, however after quite a lot of searching and trying different loading techniques I've been unable to reduce this difference. With Java I get an image loaded in 248ms and loaded into OpenGL in 728ms The same on C# takes 54ms to load the image, and 34ms to load/create texture. The image in question above is a PNG containing transparency, sized 7200x255, used for a 2D animated sprite. I realise the size is really quite ridiculous and am considering cutting up the sprite, however the large difference is still there (and confusing). On the Java side the code looks like this: BufferedImage image = ImageIO.read(new File(fileName)); texture = TextureIO.newTexture(image, false); texture.setTexParameteri(GL.GL_TEXTURE_MIN_FILTER, GL.GL_LINEAR); texture.setTexParameteri(GL.GL_TEXTURE_MAG_FILTER, GL.GL_LINEAR); The C# code uses: Bitmap t = new Bitmap(fileName); t.RotateFlip(RotateFlipType.RotateNoneFlipY); Rectangle r = new Rectangle(0, 0, t.Width, t.Height); BitmapData bd = t.LockBits(r, ImageLockMode.ReadOnly, PixelFormat.Format32bppArgb); Gl.glBindTexture(Gl.GL_TEXTURE_2D, tID); Gl.glTexImage2D(Gl.GL_TEXTURE_2D, 0, Gl.GL_RGBA, t.Width, t.Height, 0, Gl.GL_BGRA, Gl.GL_UNSIGNED_BYTE, bd.Scan0); Gl.glTexParameteri(Gl.GL_TEXTURE_2D, Gl.GL_TEXTURE_MIN_FILTER, Gl.GL_LINEAR); Gl.glTexParameteri(Gl.GL_TEXTURE_2D, Gl.GL_TEXTURE_MAG_FILTER, Gl.GL_LINEAR); t.UnlockBits(bd); t.Dispose(); After quite a lot of testing I can only come to the conclusion that Java/JOGL is just slower here - PNG reading might not be as quick, or that I'm still doing something wrong. Thanks. Edit2: I have found that creating a new BufferedImage with format TYPE_INT_ARGB_PRE decreases OpenGL texture load time by almost half - this includes having to create the new BufferedImage, getting the Graphics2D from it and then rendering the previously loaded image to it. Edit3: Benchmark results for 5 variations. I wrote a small benchmarking tool, the following results come from loading a set of 33 pngs, most are very wide, 5 times. testStart: ImageIO.read(file) -> TextureIO.newTexture(image) result: avg = 10250ms, total = 51251 testStart: ImageIO.read(bis) -> TextureIO.newTexture(image) result: avg = 10029ms, total = 50147 testStart: ImageIO.read(file) -> TextureIO.newTexture(argbImage) result: avg = 5343ms, total = 26717 testStart: ImageIO.read(bis) -> TextureIO.newTexture(argbImage) result: avg = 5534ms, total = 27673 testStart: TextureIO.newTexture(file) result: avg = 10395ms, total = 51979 ImageIO.read(bis) refers to the technique described in James Branigan's answer below. argbImage refers to the technique described in my previous edit: img = ImageIO.read(file); argbImg = new BufferedImage(img.getWidth(), img.getHeight(), TYPE_INT_ARGB_PRE); g = argbImg.createGraphics(); g.drawImage(img, 0, 0, null); texture = TextureIO.newTexture(argbImg, false); Any more methods of loading (either images from file, or images to OpenGL) would be appreciated, I will update these benchmarks.

Read the article

Edit and render RichText

- by OregonGhost

We have an application (a custom network management tool for building automation) that supports printing labels that you can cut out and insert into the devices' front displays. In earlier versions of the tool (not developed in my company), the application just pushed the strings into an Excel file that the field technician could then manipulate (like formatting text). We didn't do this in the new version because it was hard (impossible) to keep the Excel file in sync, and to avoid a binding to an external application (let alone different versions of Excel). We're using PDFSharp for rendering the labels. It has a System.Drawing-like interface, but can output to a System.Drawing.Graphics (screen / printer) as well as to a PDF file, which is a requirement. Later, basic formatting was introduced like Font Family, Style, Size, Color which would apply to one label (i.e. to exactly one string). Now the customer wants to be able to apply these formats to single characters in a string. I think the easiest way would be to support a subset of RichText. It's not as easy as I thought though. Currently the editor just displays a TextBox for the label you want to edit, with the font set to the label's font. I thought I'd just replace it with RichTextBox, and update the formatting buttons to use the RichTextBox formatting properties. Fairly easy. However, I need to draw the text. I know you can get the RichTextBox to draw to a HDC or System.Drawing.Graphics - but as already said, I need it to use PDFSharp. Rendering to bitmaps is not an option, since the PDF must not be huge, and it's a lot of labels. Unfortunately I couldn't get the RichTextBox to tell me the layout of the text - I'm fine with doing the actual rendering by hand, as long as I know where to draw what. This is the first question: How can I get the properly layouted metrics of the rich text out of a RichTextBox? Or is there any way to convert the rich text to a vector graphics format that can be easily drawn manually? I know about NRTFTree which can be used to parse and manipulate RichText. The documentation is bad (actually I don't know, it's Spanish), but I think I can get it to work. As far as I understood, it won't provide layouting as well. Because of this, I think I'll have to write a custom edit control (remember, it's basically just one or two line labels with basic RTF formatting, not a full-fledged edit control - more like editing a textbox in PowerPoint) and write custom text layout logic that used PDFSharp rather than System.Drawing for drawing. Is there any existing, even if partial, solution available, either for the editing or for doing the layout manually (or both)? Or is there an entirely different approach I'm just not seeing? Bonus points if exporting the label texts as RTF into a CSV file, and then importing in Excel retains the formatting. For the editing part, I need it to work in Windows Forms. Other than that it's not Windows-Forms-related, I think.

Read the article

Server Error in '/' Application. - The resource cannot be Found.

- by Bigced_21

I am new to ASP.NET MVC 2. I do not understand why I am receiving this error. Is there something missing that i'm not referencing correctly. I'm trying to create a simple jquery autocomplete online search textbox and view the details of the person that i select using System; using System.Collections.Generic; using System.Linq; using System.Web; using System.Web.Mvc; using System.Web.Mvc.Ajax; using DOC_Kools.Models; namespace DOC_Kools.Controllers { public class HomeController : Controller { private KOOLSEntities _dataModel = new KOOLSEntities(); // // GET: /Home/ public ActionResult Index() { ViewData["Message"] = "Welcome to ASP.NET MVC!"; return View(); } // // GET: /Home/ public ActionResult getAjaxResult(string q) { string searchResult = string.Empty; var offenders = (from o in _dataModel.OffenderSet where o.LastName.Contains(q) orderby o.LastName select o).Take(10); foreach (Offender o in offenders) { searchResult += string.Format("{0}|r\n", o.LastName); } return Content(searchResult); } [AcceptVerbs(HttpVerbs.Post)] public ActionResult Search(string searchTerm) { if (searchTerm == string.Empty) { return View(); } else { // if the search contains only one result return detials // otherwise a list var offenders = from o in _dataModel.OffenderSet where o.LastName.Contains(searchTerm) orderby o.LastName select o; if (offenders.Count() == 0) { return View("not found"); } if (offenders.Count() > 1) { return View("List", offenders); } else { return RedirectToAction("Details", new { id = offenders.First().SPN }); } } } // // GET: /Home/Details/5 public ActionResult Details(int id) { return View(); } // // GET: /Home/Create public ActionResult Create() { return View(); } // // POST: /Home/Create [AcceptVerbs(HttpVerbs.Post)] public ActionResult Create(FormCollection collection) { try { // TODO: Add insert logic here return RedirectToAction("Index"); } catch { return View(); } } // // GET: /Home/Edit/5 public ActionResult Edit(int id) { return View(); } // // POST: /Home/Edit/5 [AcceptVerbs(HttpVerbs.Post)] public ActionResult Edit(int id, FormCollection collection) { try { // TODO: Add update logic here return RedirectToAction("Index"); } catch { return View(); } } public ActionResult About() { return View(); } } } using System; using System.Collections.Generic; using System.Linq; using System.Web; using System.Web.Mvc; using System.Web.Routing; namespace DOC_Kools { // Note: For instructions on enabling IIS6 or IIS7 classic mode, // visit http://go.microsoft.com/?LinkId=9394801 public class MvcApplication : System.Web.HttpApplication { public static void RegisterRoutes(RouteCollection routes) { routes.IgnoreRoute("{resource}.axd/{*pathInfo}"); routes.MapRoute( "Default", // Route name "{controller}/{action}/{id}", // URL with parameters new { controller = "Home", action = "Index", id = "" } // Parameter defaults ); routes.MapRoute( "OffenderSearch", "Offenders/Search/{searchTerm}", new { controller = "Home", action = "Index", searchTerm = "" } ); routes.MapRoute( "OffenderAjaxSearch", "Offenders/getAjaxResult/", new { controller = "Home", action = "getAjaxResult" } ); } protected void Application_Start() { AreaRegistration.RegisterAllAreas(); RegisterRoutes(RouteTable.Routes); } } } <%@ Page Title="" Language="C#" MasterPageFile="~/Views/Shared/Site.Master" Inherits="System.Web.Mvc.ViewPage<DOC_Kools.Models.Offender>" %> $(document).ready(function() { $("#searchTerm").autocomplete("/Offenders/getAjaxResult/"); }); Home Page <%= Html.Encode(ViewData["Message"]) % <h2>Look for an offender</h2> <form action="/Offenders/Search" method="post" id="searchForm"> <input type="text" name="searchTerm" id="searchTerm" value="" size="10" maxlength="30" /> <input type="submit" value="Search" /> </form> <br /> what do i have to do in order for the textbox search to display on the index page? What else do i have to do for the autocomplete to function correctly. i have the autocomplete.js & jquery.js added to the index.aspx view Any help will be appreciated so that i can get this working. Thanks!

Read the article

How do I use C# and ADO.NET to query an Oracle table with a spatial column of type SDO_GEOMETRY?

- by John Donahue

My development machine is running Windows 7 Enterprise, 64-bit version. I am using Visual Studio 2010 Release Candidate. I am connecting to an Oracle 11g Enterprise server version 11.1.0.7.0. I had a difficult time locating Oracle client software that is made for 64-bit Windows systems and eventually landed here to download what I assume is the proper client connectivity software. I added a reference to "Oracle.DataAccess" which is version 2.111.6.0 (Runtime Version is v2.0.50727). I am targeting .NET CLR version 4.0 since all properties of my VS Solution are defaults and this is 2010 RC. I was then able to write a console application in C# that established connectivity, executed a SELECT statement, and properly returned data when the table in question does NOT contain a spatial column. My problem is that this no longer works when the table I query has a column of type SDO_GEOMETRY in it. Below is the simple console application I am trying to run that reproduces the problem. When the code gets to the line with the "ExecuteReader" command, an exception is raised and the message is "Unsupported column datatype". using System; using System.Data; using Oracle.DataAccess.Client; namespace ConsoleTestOracle { class Program { static void Main(string[] args) { string oradb = string.Format("Data Source={0};User Id={1};Password={2};", "hostname/servicename", "login", "password"); try { using (OracleConnection conn = new OracleConnection(oradb)) { conn.Open(); OracleCommand cmd = new OracleCommand(); cmd.Connection = conn; cmd.CommandText = "select * from SDO_8307_2D_POINTS"; cmd.CommandType = CommandType.Text; OracleDataReader dr = cmd.ExecuteReader(); } } catch (Exception e) { string error = e.Message; } } } } The fact that this code works when used against a table that does not contain a spatial column of type SDO_GEOMETRY makes me think I have my windows 7 machine properly configured so I am surprised that I get this exception when the table contains different kinds of columns. I don't know if there is some configuration on my machine or the Oracle machine that needs to be done, or if the Oracle client software I have installed is wrong, or old and needs to be updated. Here is the SQL I used to create the table, populate it with some rows containing points in the spatial column, etc. if you want to try to reproduce this exactly. SQL Create Commands: create table SDO_8307_2D_Points (ObjectID number(38) not null unique, TestID number, shape SDO_GEOMETRY); Insert into SDO_8307_2D_Points values (1, 1, SDO_GEOMETRY(2001, 8307, null, SDO_ELEM_INFO_ARRAY(1, 1, 1), SDO_ORDINATE_ARRAY(10.0, 10.0))); Insert into SDO_8307_2D_Points values (2, 2, SDO_GEOMETRY(2001, 8307, null, SDO_ELEM_INFO_ARRAY(1, 1, 1), SDO_ORDINATE_ARRAY(10.0, 20.0))); insert into user_sdo_geom_metadata values ('SDO_8307_2D_Points', 'SHAPE', SDO_DIM_ARRAY(SDO_DIM_ELEMENT('Lat', -180, 180, 0.05), SDO_DIM_ELEMENT('Long', -90, 90, 0.05)), 8307); create index SDO_8307_2D_Point_indx on SDO_8307_2D_Points(shape) indextype is mdsys.spatial_index PARAMETERS ('sdo_indx_dims=2' ); Any advice or insights would be greatly appreciated. Thank you.

Read the article

Populate google.visualization.DataTable for a AnnotatedTimeLine using JSON

- by Lucifer

Hi I have a HttpHandler which returns some JSON in (i think) the correct format for a google.visualization.DataTable, but the AnnotatedTimeLine fails to work? This is the JSON returned by the Handler: {cols: [{id: 'DATE', label: 'Date', type: 'date'}, {id: 'KEYWORD51', label: 'vw cheltenham', type: 'number'}, {id: 'KEYWORD52', label: 'volkswagen cheltenham', type: 'number'}, {id: 'KEYWORD61', label: 'vw dealer cheltenham', type: 'number'}], rows: [{c: [{v: new Date(2010, 3, 13)}, {v: 20}, {v: 1}, {v: 2}]}, {c: [{v: new Date(2010, 3, 14)}, {v: 19}, {v: 0}, {v: 0}]}, {c: [{v: new Date(2010, 3, 15)}, {v: 19}, {v: 0}, {v: 0}]}, {c: [{v: new Date(2010, 3, 16)}, {v: 18}, {v: 0}, {v: 0}]}, {c: [{v: new Date(2010, 3, 17)}, {v: 17}, {v: 0}, {v: 0}]}, {c: [{v: new Date(2010, 3, 18)}, {v: 17}, {v: 0}, {v: 0}]}, {c: [{v: new Date(2010, 3, 19)}, {v: 12}, {v: 0}, {v: 0}]}, {c: [{v: new Date(2010, 3, 20)}, {v: 13}, {v: 0}, {v: 0}]}, {c: [{v: new Date(2010, 3, 21)}, {v: 11}, {v: 0}, {v: 0}]}, {c: [{v: new Date(2010, 3, 22)}, {v: 10}, {v: 0}, {v: 0}]}, {c: [{v: new Date(2010, 3, 23)}, {v: 10}, {v: 0}, {v: 0}]}, {c: [{v: new Date(2010, 3, 24)}, {v: 8}, {v: 0}, {v: 0}]}, {c: [{v: new Date(2010, 3, 25)}, {v: 6}, {v: 0}, {v: 0}]}, {c: [{v: new Date(2010, 3, 26)}, {v: 6}, {v: 0}, {v: 0}]}, {c: [{v: new Date(2010, 3, 27)}, {v: 5}, {v: 0}, {v: 0}]}, {c: [{v: new Date(2010, 3, 28)}, {v: 4}, {v: 0}, {v: 0}]}, {c: [{v: new Date(2010, 3, 29)}, {v: 4}, {v: 0}, {v: 0}]}, {c: [{v: new Date(2010, 3, 30)}, {v: 2}, {v: 1}, {v: 1}]}, {c: [{v: new Date(2010, 4, 1)}, {v: 2}, {v: 1}, {v: 1}]}, {c: [{v: new Date(2010, 4, 2)}, {v: 1}, {v: 1}, {v: 1}]}, {c: [{v: new Date(2010, 4, 3)}, {v: 2}, {v: 1}, {v: 1}]}, {c: [{v: new Date(2010, 4, 4)}, {v: 0}, {v: 1}, {v: 1}]}, {c: [{v: new Date(2010, 4, 5)}, {v: 0}, {v: 1}, {v: 1}]}, {c: [{v: new Date(2010, 4, 6)}, {v: 0}, {v: 0}, {v: 0}]}, {c: [{v: new Date(2010, 4, 7)}, {v: 0}, {v: 0}, {v: 0}]}, {c: [{v: new Date(2010, 4, 8)}, {v: 0}, {v: 0}, {v: 0}]}, {c: [{v: new Date(2010, 4, 9)}, {v: 0}, {v: 0}, {v: 0}]}, {c: [{v: new Date(2010, 4, 10)}, {v: 0}, {v: 0}, {v: 0}]}, {c: [{v: new Date(2010, 4, 11)}, {v: 0}, {v: 1}, {v: 1}]}, {c: [{v: new Date(2010, 4, 12)}, {v: 2}, {v: 1}, {v: 1}]}]} This is the Javascript, I used JQuery to get the JSON, have also tried $.getJSON() google.load('visualization', '1', { 'packages': ['annotatedtimeline'] }); google.setOnLoadCallback(loadGraph); function loadGraph() { $.get("/GraphDataHandler.axd", function(response) { drawGraph(response); }); } function drawGraph(response) { var visualization = new google.visualization.AnnotatedTimeLine(document.getElementById('chart_div')); var data = new google.visualization.DataTable(response, 0.6); visualization.draw(data, { title: 'Rankings', titleX: 'Date', titleY: 'Position', displayAnnotations: false, allowRedraw: true }); } But, if I write the same JSON to the page like below it works fine!? <script type="text/javascript"> //<![CDATA[ var gData = {cols: [{id: 'DATE', label: 'Date', type: 'date'}, {id: 'KEYWORD51', label: 'vw cheltenham', type: 'number'}], rows: [{c: [{v: new Date(2010, 3, 13)}, {v: 20}]}, {c: [{v: new Date(2010, 3, 14)}, {v: 19}]}, {c: [{v: new Date(2010, 3, 15)}, {v: 19}]}, {c: [{v: new Date(2010, 3, 16)}, {v: 18}]}, {c: [{v: new Date(2010, 3, 17)}, {v: 17}]}, {c: [{v: new Date(2010, 3, 18)}, {v: 17}]}, {c: [{v: new Date(2010, 3, 19)}, {v: 12}]}, {c: [{v: new Date(2010, 3, 20)}, {v: 13}]}, {c: [{v: new Date(2010, 3, 21)}, {v: 11}]}, {c: [{v: new Date(2010, 3, 22)}, {v: 10}]}, {c: [{v: new Date(2010, 3, 23)}, {v: 10}]}, {c: [{v: new Date(2010, 3, 24)}, {v: 8}]}, {c: [{v: new Date(2010, 3, 25)}, {v: 6}]}, {c: [{v: new Date(2010, 3, 26)}, {v: 6}]}, {c: [{v: new Date(2010, 3, 27)}, {v: 5}]}, {c: [{v: new Date(2010, 3, 28)}, {v: 4}]}, {c: [{v: new Date(2010, 3, 29)}, {v: 4}]}, {c: [{v: new Date(2010, 3, 30)}, {v: 2}]}, {c: [{v: new Date(2010, 4, 1)}, {v: 2}]}, {c: [{v: new Date(2010, 4, 2)}, {v: 1}]}, {c: [{v: new Date(2010, 4, 3)}, {v: 2}]}, {c: [{v: new Date(2010, 4, 4)}, {v: 0}]}, {c: [{v: new Date(2010, 4, 5)}, {v: 0}]}, {c: [{v: new Date(2010, 4, 6)}, {v: 0}]}, {c: [{v: new Date(2010, 4, 7)}, {v: 0}]}, {c: [{v: new Date(2010, 4, 8)}, {v: 0}]}, {c: [{v: new Date(2010, 4, 9)}, {v: 0}]}, {c: [{v: new Date(2010, 4, 10)}, {v: 0}]}, {c: [{v: new Date(2010, 4, 11)}, {v: 0}]}, {c: [{v: new Date(2010, 4, 12)}, {v: 2}]}]}; //]]> </script> Please advise how I can get it to work correctly using a the JSON calls? Thanks

Read the article

Jquery datepicker popup not closing on select date in IE8

- by Notorious2tall

I've got a web form with a start date field. I've tied a jquery datepicker to the txt field. Now when I choose a date in FF, the selected date is populated in the text box and the calendar popup closes. However when I do the same thing in IE8, the selected date is populated in the text box but the popup remains open. I've also noticed that a script error is generated as soon as I select a date in the popup calendar. I'm using jquery 1.3.2, jquery-ui 1.7.2, and .NET 3.5. Here's an example of my code: <script type="text/javascript"> $(document).ready(function() { $("#<%=txtStartDate.ClientID%>").datepicker({ changeMonth: true, changeYear: true, showButtonPanel: true, showOn: 'button', buttonImage: '/_layouts/images/CALENDAR.GIF', buttonImageOnly: true }); }); </script> <div id="stylized"> <asp:ValidationSummary ID="vs" runat="server" CssClass="messages-error" HeaderText=" Action required before the form can be submitted." ForeColor="" ValidationGroup="sh" /> <div class="formrow"> <div class="ms-formlabel formlabel"> <asp:Label ID="lblStartDate" runat="server" CssClass="ms-standardheader" AssociatedControlID="txtStartDate">Start Date:</asp:Label> </div> <div class="ms-formbody formfield"> <asp:RequiredFieldValidator ID="reqStartDate" runat="server" ControlToValidate="txtStartDate" ErrorMessage="Start Date is a required field." Text="*" Display="Dynamic" ValidationGroup="sh"></asp:RequiredFieldValidator> <asp:CompareValidator ID="cvStartDate" runat="server" ControlToValidate="txtStartDate" ErrorMessage="Date must be in the format MM/DD/YYYY" Text="*" Display="Dynamic" ValidationGroup="sh" Operator="DataTypeCheck" Type="Date"></asp:CompareValidator> <asp:TextBox ID="txtStartDate" runat="server"></asp:TextBox> <span class="formMessage">ex. MM/DD/YYYY</span> </div> </div> <div id="buttonrow"> <asp:Button ID="btnSubmit" runat="server" Text="Submit" CssClass="ms-ButtonHeightWidth" OnClick="Submit_Click" ValidationGroup="sh" /> <asp:Button ID="btnCancel" runat="server" Text="Cancel" CssClass="ms-ButtonHeightWidth" OnClick="Cancel_Click" CausesValidation="false" /> </div> </div> Here's the script error I get in IE when I select the date: 'length' is null or not an object WebResource.axd Here's the code where the error is being thrown from: function ValidatorOnChange(event) { if (!event) { event = window.event; } Page_InvalidControlToBeFocused = null; var targetedControl; if ((typeof(event.srcElement) != "undefined") && (event.srcElement != null)) { targetedControl = event.srcElement; } else { targetedControl = event.target; } var vals; if (typeof(targetedControl.Validators) != "undefined") { vals = targetedControl.Validators; } else { if (targetedControl.tagName.toLowerCase() == "label") { targetedControl = document.getElementById(targetedControl.htmlFor); vals = targetedControl.Validators; } } var i; for (i = 0; i < vals.length; i++) { ValidatorValidate(vals[i], null, event); } ValidatorUpdateIsValid(); } It happens on the .length in the for loop at the end. Vals is null and isn't found in the previous if/else. I've stepped through the javascript and if (typeof(targetedControl.Validators) != "undefined") returns false and then if (targetedControl.tagName.toLowerCase() == "label") returns false too. Thus the length is null or not an object error. Now I'm not sure if the datepicker popup not closing in IE and the script error in the WebResources.axd file are related errors, but I'm leaning that way. Can anyone tell me why the popup isn't closing?

Read the article

Need Help Setting an Image with Transparent Background to Clipboard

- by AMissico

I need help setting a transparent image to the clipboard. I keep getting "handle is invalid". Basically, I need a "second set of eyes" to look over the following code. (The complete working project at ftp://missico.net/ImageVisualizer.zip.) This is an image Debug Visualizer class library, but I made the included project to run as an executable for testing. (Note that window is a toolbox window and show in taskbar is set to false.) I was tired of having to perform a screen capture on the toolbox window, open the screen capture with an image editor, and then deleting the background added because it was a screen capture. So I thought I would quickly put the transparent image onto the clipboard. Well, the problem is...no transparency support for Clipboard.SetImage. Google to the rescue...not quite. This is what I have so far. I pulled from a number of sources. See the code for the main reference. My problem is the "invalid handle" when using CF_DIBV5. Do I need to use BITMAPV5HEADER and CreateDIBitmap? Any help from you GDI/GDI+ Wizards would be greatly appreciated. public static void SetClipboardData(Bitmap bitmap, IntPtr hDC) { const uint SRCCOPY = 0x00CC0020; const int CF_DIBV5 = 17; const int CF_BITMAP = 2; //'reference //'http://social.msdn.microsoft.com/Forums/en-US/winforms/thread/816a35f6-9530-442b-9647-e856602cc0e2 IntPtr memDC = CreateCompatibleDC(hDC); IntPtr memBM = CreateCompatibleBitmap(hDC, bitmap.Width, bitmap.Height); SelectObject(memDC, memBM); using (Graphics g = Graphics.FromImage(bitmap)) { IntPtr hBitmapDC = g.GetHdc(); IntPtr hBitmap = bitmap.GetHbitmap(); SelectObject(hBitmapDC, hBitmap); BitBlt(memDC, 0, 0, bitmap.Width, bitmap.Height, hBitmapDC, 0, 0, SRCCOPY); if (!OpenClipboard(IntPtr.Zero)) { throw new System.Runtime.InteropServices.ExternalException("Could not open Clipboard", new Win32Exception()); } if (!EmptyClipboard()) { throw new System.Runtime.InteropServices.ExternalException("Unable to empty Clipboard", new Win32Exception()); } //IntPtr hClipboard = SetClipboardData(CF_BITMAP, memBM); //works but image is not transparent //all my attempts result in SetClipboardData returning hClipboard = IntPtr.Zero IntPtr hClipboard = SetClipboardData(CF_DIBV5, memBM); //because if (hClipboard == IntPtr.Zero) { // InnerException: System.ComponentModel.Win32Exception // Message="The handle is invalid" // ErrorCode=-2147467259 // NativeErrorCode=6 // InnerException: throw new System.Runtime.InteropServices.ExternalException("Could not put data on Clipboard", new Win32Exception()); } if (!CloseClipboard()) { throw new System.Runtime.InteropServices.ExternalException("Could not close Clipboard", new Win32Exception()); } g.ReleaseHdc(hBitmapDC); } } private void __copyMenuItem_Click(object sender, EventArgs e) { using (Graphics g = __pictureBox.CreateGraphics()) { IntPtr hDC = g.GetHdc(); MemoryStream ms = new MemoryStream(); __pictureBox.Image.Save(ms, ImageFormat.Png); ms.Seek(0, SeekOrigin.Begin); Image imag = Image.FromStream(ms); // Derive BitMap object using Image instance, so that you can avoid the issue //"a graphics object cannot be created from an image that has an indexed pixel format" Bitmap img = new Bitmap(new Bitmap(imag)); SetClipboardData(img, hDC); g.ReleaseHdc(); } }

Read the article

Android: canvas.drawBitmap with Orientation(MagnetField)Sensor

- by user368374

hallo, i am developing Android app with orientation sensor. now i got problem. What i want to do is, change scale and position of bitmap which read from sd card. The scale and position depend on value from orientation sensor. i use canvas.drawBitmap(), then it cause problem. the app is just shut down. other drawXXX()methods have no problem..any suggestion? public class AnMagImgtestActivity extends Activity implements SensorEventListener { private SensorManager sensorManager; private MySurfaceView view; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); sensorManager = (SensorManager)getSystemService(SENSOR_SERVICE); view = new MySurfaceView(this); ///make it fullscreen getWindow().addFlags(WindowManager.LayoutParams.FLAG_FULLSCREEN); requestWindowFeature(Window.FEATURE_NO_TITLE); ///give screen a hiropon getWindow().addFlags(WindowManager.LayoutParams.FLAG_KEEP_SCREEN_ON); setContentView(view); } @Override protected void onResume() { super.onResume(); List sensors = sensorManager.getSensorList(Sensor.TYPE_ORIENTATION); if (sensors.size() 0) { Sensor sensor = sensors.get(0); sensorManager.registerListener(this, sensor, SensorManager.SENSOR_DELAY_GAME); } } @Override protected void onPause() { super.onPause(); sensorManager.unregisterListener(this); } @Override public void onAccuracyChanged(Sensor sensor, int accuracy) { } @Override public void onSensorChanged(SensorEvent event) { view.onValueChanged(event.values); } class MySurfaceView extends SurfaceView implements SurfaceHolder.Callback{ public MySurfaceView(Context context) { super(context); getHolder().addCallback(this); } @Override public void surfaceChanged(SurfaceHolder holder, int format, int width, int height) { onValueChanged(new float[3]); } @Override public void surfaceCreated(SurfaceHolder holder) { } @Override public void surfaceDestroyed(SurfaceHolder holder) { } void onValueChanged(float[] values) { Canvas canvas = getHolder().lockCanvas(); //String imgfn = "/sdcard/seekcamera"+"/"+regcode+"/to"+"/"+tempnum+".jpg"; String imgfn = "/sdcard/seekcamera"+"/de"+"/to"+"1.jpg"; //String imgfn = "/sdcard/seekcamera"+"/00"+"/00"+"/"+"42.jpg"; File mf = new File(imgfn); Bitmap bitmap0 = BitmapFactory.decodeFile(mf.getPath()); if (canvas != null) { Paint paint = new Paint(); paint.setAntiAlias(true); paint.setColor(Color.GREEN); paint.setTextSize(12); canvas.drawColor(Color.BLACK); paint.setAlpha(200); for (int i = 0; i < values.length; i++) { canvas.drawText("values[" + i + "]: " + values[i], 0, paint.getTextSize() * (i + 1), paint); } paint.setColor(Color.WHITE); paint.setTextSize(100+values[2]); paint.setAlpha( (int) (255-values[2])); canvas.drawText("Germany", values[0]*1+20, paint.getTextSize() * 1+values[2]-80, paint); ///here is the problem.. canvas.drawBitmap(bitmap0, values[0],values[1], paint); getHolder().unlockCanvasAndPost(canvas); } } } }

Read the article

no namenode error in pseudo-mode

- by Anshu Basia

I'm new to hadoop and is in learning phase. As per Hadoop Definitve guide, i have set up my hadoop in pseudo distributed mode and everything was working fine. I was even able to execute all the examples from chapter 3 yesterday. Today, when i rebooted my unix and tried to run start-dfs.sh and then tried http://localhost/50070....it is showing error and when i try to stop dfs (stop-dfs.sh) it says no namenode to stop. I have been googling the issue but no result. Also, when i format my namenode again...everything starts working fine and i'm able to connect to the localhost/50070 and even replicate files and directories in hdfs but as soon as i restart my linux and try to connect to hdfs the same problem comes up. Below is the error log: ************************************************************/ 2011-06-22 15:45:55,249 INFO org.apache.hadoop.hdfs.server.namenode.NameNode: STARTUP_MSG: /************************************************************ STARTUP_MSG: Starting NameNode STARTUP_MSG: host = ubuntu/127.0.1.1 STARTUP_MSG: args = [] STARTUP_MSG: version = 0.20.203.0 STARTUP_MSG: build = http://svn.apache.org/repos/asf/hadoop/common/branches/branch-0.20-security-203 -r 1099333; compiled by 'oom' on Wed May 4 07:57:50 PDT 2011 ************************************************************/ 2011-06-22 15:45:56,383 INFO org.apache.hadoop.metrics2.impl.MetricsConfig: loaded properties from hadoop-metrics2.properties 2011-06-22 15:45:56,455 INFO org.apache.hadoop.metrics2.impl.MetricsSourceAdapter: MBean for source MetricsSystem,sub=Stats registered. 2011-06-22 15:45:56,494 INFO org.apache.hadoop.metrics2.impl.MetricsSystemImpl: Scheduled snapshot period at 10 second(s). 2011-06-22 15:45:56,494 INFO org.apache.hadoop.metrics2.impl.MetricsSystemImpl: NameNode metrics system started 2011-06-22 15:45:57,007 INFO org.apache.hadoop.metrics2.impl.MetricsSourceAdapter: MBean for source ugi registered. 2011-06-22 15:45:57,031 WARN org.apache.hadoop.metrics2.impl.MetricsSystemImpl: Source name ugi already exists! 2011-06-22 15:45:57,059 INFO org.apache.hadoop.metrics2.impl.MetricsSourceAdapter: MBean for source jvm registered. 2011-06-22 15:45:57,070 INFO org.apache.hadoop.metrics2.impl.MetricsSourceAdapter: MBean for source NameNode registered. 2011-06-22 15:45:57,374 INFO org.apache.hadoop.hdfs.util.GSet: VM type = 32-bit 2011-06-22 15:45:57,374 INFO org.apache.hadoop.hdfs.util.GSet: 2% max memory = 19.33375 MB 2011-06-22 15:45:57,374 INFO org.apache.hadoop.hdfs.util.GSet: capacity = 2^22 = 4194304 entries 2011-06-22 15:45:57,374 INFO org.apache.hadoop.hdfs.util.GSet: recommended=4194304, actual=4194304 2011-06-22 15:45:57,854 INFO org.apache.hadoop.hdfs.server.namenode.FSNamesystem: fsOwner=anshu 2011-06-22 15:45:57,854 INFO org.apache.hadoop.hdfs.server.namenode.FSNamesystem: supergroup=supergroup 2011-06-22 15:45:57,854 INFO org.apache.hadoop.hdfs.server.namenode.FSNamesystem: isPermissionEnabled=true 2011-06-22 15:45:57,868 INFO org.apache.hadoop.hdfs.server.namenode.FSNamesystem: dfs.block.invalidate.limit=100 2011-06-22 15:45:57,869 INFO org.apache.hadoop.hdfs.server.namenode.FSNamesystem: isAccessTokenEnabled=false accessKeyUpdateInterval=0 min(s), accessTokenLifetime=0 min(s) 2011-06-22 15:45:58,769 INFO org.apache.hadoop.hdfs.server.namenode.FSNamesystem: Registered FSNamesystemStateMBean and NameNodeMXBean 2011-06-22 15:45:58,809 INFO org.apache.hadoop.hdfs.server.namenode.NameNode: Caching file names occuring more than 10 times **2011-06-22 15:45:58,825 INFO org.apache.hadoop.hdfs.server.common.Storage: Storage directory /tmp/hadoop-anshu/dfs/name does not exist. 2011-06-22 15:45:58,827 ERROR org.apache.hadoop.hdfs.server.namenode.FSNamesystem: FSNamesystem initialization failed. org.apache.hadoop.hdfs.server.common.InconsistentFSStateException: Directory /tmp/hadoop-anshu/dfs/name is in an inconsistent state: storage directory does not exist or is not accessible. at org.apache.h**adoop.hdfs.server.namenode.FSImage.recoverTransitionRead(FSImage.java:291) at org.apache.hadoop.hdfs.server.namenode.FSDirectory.loadFSImage(FSDirectory.java:97) at org.apache.hadoop.hdfs.server.namenode.FSNamesystem.initialize(FSNamesystem.java:379) at org.apache.hadoop.hdfs.server.namenode.FSNamesystem.<init>(FSNamesystem.java:353) at org.apache.hadoop.hdfs.server.namenode.NameNode.initialize(NameNode.java:254) at org.apache.hadoop.hdfs.server.namenode.NameNode.<init>(NameNode.java:434) at org.apache.hadoop.hdfs.server.namenode.NameNode.createNameNode(NameNode.java:1153) at org.apache.hadoop.hdfs.server.namenode.NameNode.main(NameNode.java:1162) 2011-06-22 15:45:58,828 ERROR org.apache.hadoop.hdfs.server.namenode.NameNode: org.apache.hadoop.hdfs.server.common.InconsistentFSStateException: Directory /tmp/hadoop-anshu/dfs/name is in an inconsistent state: storage directory does not exist or is not accessible. at org.apache.hadoop.hdfs.server.namenode.FSImage.recoverTransitionRead(FSImage.java:291) at org.apache.hadoop.hdfs.server.namenode.FSDirectory.loadFSImage(FSDirectory.java:97) at org.apache.hadoop.hdfs.server.namenode.FSNamesystem.initialize(FSNamesystem.java:379) at org.apache.hadoop.hdfs.server.namenode.FSNamesystem.<init>(FSNamesystem.java:353) at org.apache.hadoop.hdfs.server.namenode.NameNode.initialize(NameNode.java:254) at org.apache.hadoop.hdfs.server.namenode.NameNode.<init>(NameNode.java:434) at org.apache.hadoop.hdfs.server.namenode.NameNode.createNameNode(NameNode.java:1153) at org.apache.hadoop.hdfs.server.namenode.NameNode.main(NameNode.java:1162) 2011-06-22 15:45:58,829 INFO org.apache.hadoop.hdfs.server.namenode.NameNode: SHUTDOWN_MSG: /************************************************************ SHUTDOWN_MSG: Shutting down NameNode at ubuntu/127.0.1.1 ************************************************************/ Any help is appreciated Thank-you

Search Results

Search found 14936 results on 598 pages for 'format conversion'.

Page 570/598 | < Previous Page | 566 567 568 569 570 571 572 573 574 575 576 577 | Next Page >

- by kostmo

- by Mike Purcell

- by tcherokee

- by sage

- by klausch

- by SuperTempel

- by afit

- by MilosC

- by user1902288

- by Timothy

- by Ender

- by David J.

- by Nathan Long

- by Woody

- by JTeagle

- by Quantumplation

- by Edward Cresswell

- by OregonGhost

- by Bigced_21

- by John Donahue

- by Lucifer

- by Notorious2tall

- by AMissico

- by user368374

- by Anshu Basia

< Previous Page | 566 567 568 569 570 571 572 573 574 575 576 577 | Next Page >