Search Results

Search found 25148 results on 1006 pages for 'distributed source contr'.

Page 571/1006 | < Previous Page | 567 568 569 570 571 572 573 574 575 576 577 578  | Next Page >

• Thoughts on home NAS server

  - by user826955

  I currently have a NAS with a 2x2TB HDD 1x16GB SSD layout on a mini-itx atom board. The NAS is in a Lian Li PC-Q07 case. On this system I was running freebsd 8 with a gmirror raid 1 setup, which was enough for my needs. So far I was using the NAS for: Fileserver with AFP protocol (only mac clients used) SVN server hosting all my source trees of my projects JIRA (performance was okay-ish) Timemachine backup for the macs The power consumption was about 38W, although I did not put HDDs asleep when unused (I think this is not possible in a raid setup). I liked the NAS because: the performance was good through gigabit LAN (enough for my needs) power consumption was good its a pretty small case and fits in one of my cupboards I disliked the NAS a bit because: it was a bit noisy, the Q07 case vibrated a good amount because of the HDDs. I switched the NAS off every evening I do not have a real backup of the data on the NAS, only the internal raid 1 as safety. I really dont want to loose my source trees under no circumstances, so I would really be sleeping better if I knew I had regular backups somewhere. Recently, the board seemed to have died, I can't boot anymore. Thus, I was thinking about a redesign of my NAS (I still have to find out what parts are broken, I probably need to replace the mainboard and SSD. HDDs seem to be okay). First of all, I was wondering what other users have as backup for their NAS? Are you actually using a second NAS, and regularly copying over the data to have it safe? Or is there any better solution to this? I was thinking about getting a cheap NAS like the synology DS112j with only one disk, and use rsync or something similar to regularly copy data over to the second NAS (wake the second NAS upon start, shut it down after copy). Although this approach seems somewhat weird, It would have the benefit (?) that I could use a single disk instead of raid in the main NAS, and put the disk asleep when idle, and have the NAS running 24/7 with low energy consumption (I found no way to do this with a gmirror setup). Is there any recommended backup solution for a small NAS? Then I was thinking about a different raid setup. Since I have to buy a new mainboard as well as SSD, I might as well switch over to a i3 board with more ram, and also switch to ZFS. I am not familar with ZFS, I've never used it, but I read and hear much about it. Would it be viable to set up a ZFS storage with only 2 disks? Can I easily extend this storage with more disks, once I choose to add some? I could maybe get a new case like the Fractal Design Array R2 which has more 3,5" slots. I could as well get another 2 disks, but I would prefer sticking with the existing 2 for enegery/heat/noise reasons. Should I go for a ZFS storage or stick to my gmirror setup? I would also like to keep freebsd as operating system, and also I dont need any web gui or something (that is, I dont need/want to use FreeNAS or Openfiler etc). Does anyone maybe have a sample setup in use so I can compare energy consumption/noise/software setup? Any guidance towards the NAS of my dreams (silent, low energy, safe w/ backups) much appreciated.

  Read the article

• File copying utility like rsync with error handling like ddrescue, for data recovery from a hard drive with bad sectors or hardware failure

  - by purefusion

  I have a hard drive with either bad blocks or sectors that are failing to read due to potential mechanical issues, such as a bad disk head, bad motor, or some other issue that is causing the hard drive to read data excruciatingly slowly and with lots of read errors. I'm seeing an average of 50 KB/sec, with some reads dropping below 10 KB/sec, and frequently it gets stuck on a file or sector altogether, usually for quite a long time—from 2-10 minutes or more (when using rsync, before it times out). Speed seems to vary wildly, and it gets stuck on files a lot, and when it finally gets "unstuck" it only seems to last for a short burst before it gets stuck again. The drive is also very quiet with only an occasional sound of files copying (usually when it gets stuck/unstuck for a brief time, before getting stuck again). Thus, there are none of those evil sounds that are normally associated with HDD death. Someone suggested that the problems sounded like they might be caused by a misaligned disk head, which requires a lot of re-reads before it finally reads data with success. Sounds plausible, but I digress... Anyway, the problem with rsync is that it seems to have no decent error handling support. Obviously, it wasn't meant for use in recovering data from failing hard drives, but all the so-called "data recovery" utilities out there that are meant for such use usually focus on recovery of deleted files or messed up partitions, rather than copying files off dying hard drives. Deleted file recovery is not what I need, obviously, so perhaps you can understand my disappointment in not being able to find what I'm after yet. Naturally, this is where you'd probably say "You should use ddrescue!" Well, that's all fine and dandy, but I've already got most of the data backed up, so I just want to recover certain files. I'm not concerned with trying to recover a full partition block-by-block as ddrescue does. I am only interested in rescuing just specific files and directories. Ideally, what I'd like is some sort of cross between rsync and ddrescue: something that lets me specify source and destination as directories of normal files like rsync (rather than two full partitions as ddrescue requires), with a way to skip files with errors in an initial run, and then allows me to attempt recovery of those files with errors in a later run (with a slightly altered command, of course), perhaps even offering an option to specify the number of retry attempts ...just like how ddrescue works with blocks, only I want a utility that works with specific files/directories like rsync does. So am I daydreaming here, or does something out there exist that can do this? Or, maybe even a way to make rsync or ddrescue work in such a way? I'm really open to whatever solutions might work, so long as they let me choose which files I want to "rescue", and can skip files with errors in the initial run, and try/retry those errors again later. So far I've tried rsync with the following options, but it often gets stuck on a file for longer than the timeout, and ideally I'd just like it to move on to the next file and come back later to the files it gets stuck on. I don't think that's possible though. Anyway, here's what I've been using up till now: rsync -avP --stats --block-size=512 --timeout=600 /path/to/source/* /path/to/destination/

  Read the article

• Forwarding rsyslog to syslog-ng, with FQDN and facility separation

  - by Joshua Miller

  I'm attempting to configure my rsyslog clients to forward messages to my syslog-ng log repository systems. Forwarding messages works "out of the box", but my clients are logging short names, not FQDNs. As a result the messages on the syslog repo use short names as well, which is a problem because one can't determine which system the message originated from easily. My clients get their names through DHCP / DNS. I've tried a number of solutions trying to get this working, but without success. I'm using rsyslog 4.6.2 and syslog-ng 3.2.5. I've tried setting $PreserveFQDN on as the first directive in /etc/rsyslog.conf (and restarting rsyslog of course). It seems to have no effect. hostname --fqdn on the client returns the proper FQDN, so the problem isn't whether the system can actually figure out its own FQDN. $LocalHostName <fqdn> looked promising, but this directive isn't available in my version of rsyslog (Available since 4.7.4+, 5.7.3+, 6.1.3+). Upgrading isn't an option at the moment. Configuring the syslog-ng server to populate names based on reverse lookups via DNS isn't an option. There are complexities with reverse DNS and the public cloud. Specifying for the forwarder to use a custom template seems like a viable option at first glance. I can specify the following, which causes local logging to begin using the FQDN on the syslog-ng repo. $template MyTemplate, "%timestamp% <FQDN> %syslogtag%%msg%" $ActionForwardDefaultTemplate MyTemplate However, when I put this in place syslog-ng seems to be unable to categorize messages by facility or priority. Messages come in as FQDN, but everything is put in to user.log. When I don't use the custom template, messages are properly categorized under facility and priority, but with the short name. So, in summary, if I manually trick rsyslog into including the FQDN, priority and facility becomes lost details to syslog-ng. How can I get rsyslog to do FQDN logging which works properly going to a syslog-ng repository? rsyslog client config: $ModLoad imuxsock.so # provides support for local system logging (e.g. via logger command) $ModLoad imklog.so # provides kernel logging support (previously done by rklogd) $ActionFileDefaultTemplate RSYSLOG_TraditionalFileFormat *.info;mail.none;authpriv.none;cron.none /var/log/messages authpriv.* /var/log/secure mail.* -/var/log/maillog cron.* /var/log/cron *.emerg * uucp,news.crit /var/log/spooler local7.* /var/log/boot.log $WorkDirectory /var/spool/rsyslog # where to place spool files $ActionQueueFileName fwdRule1 # unique name prefix for spool files $ActionQueueMaxDiskSpace 1g # 1gb space limit (use as much as possible) $ActionQueueSaveOnShutdown on # save messages to disk on shutdown $ActionQueueType LinkedList # run asynchronously $ActionResumeRetryCount -1 # infinite retries if host is down *.* @syslog-ng1.example.com *.* @syslog-ng2.example.com syslog-ng configuration (abridged for brevity): options { flush_lines (0); time_reopen (10); log_fifo_size (1000); long_hostnames (off); use_dns (no); use_fqdn (yes); create_dirs (no); keep_hostname (yes); }; source src { unix-stream("/dev/log"); internal(); udp(ip(0.0.0.0) port(514)); }; destination per_host_destination { file( "/var/log/syslog-ng/devices/$HOST/$FACILITY.log" owner("root") group("root") perm(0644) dir_owner(root) dir_group(root) dir_perm(0775) create_dirs(yes)); }; log { source(src); destination(per_facility_destination); };

  Read the article

• How to connect FreeBSD Jail to network

  - by jgtumusiime

  So recently I successfully installed and configured a freebsd jail and I would like to install software within my jail but I cannot connect to the network. I'm trying to setup an apache+php+mysql installation within the jail and have the webserver accessible by users. Here is my rc.conf for the jail. ... jail_enable="YES" # Set to NO to disable starting of any jails jail_list="mambo2" # Space separated list of names of jails jail_mambo2_rootdir="/usr/jails/j01" # jail's root directory jail_mambo2_hostname="mambo2.ug" # jail's hostname jail_mambo2_ip="192.168.100.174" # jail's IP address jail_mambo2_devfs_enable="YES" # mount devfs in the jail jail_mambo2_devfs_ruleset="mambo2_ruleset" # devfs ruleset to apply to jail here is my jail ifconfig output mambo2# ifconfig rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=8<VLAN_MTU> ether 00:c1:28:00:48:db media: Ethernet autoselect (100baseTX <full-duplex>) status: active plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500 lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 mambo2# It does not show the IP address I configured within /etc/rc.conf. But, when I list the running jails, it shows the right IP address. Here is a list of jails running [root@mambo /usr/home/jtumusiime]# jls JID IP Address Hostname Path 5 192.168.100.174 mambo2.ug /usr/jails/j01 I also created a /etc/resolv.conf for nameservers. This was not in existence so I'm not quite sure if it is necessary? mambo2# cat /etc/resolv.conf nameserver 192.168.100.251 nameserver 8.8.8.8 mambo2# my host has 4 ip addresses, 3 public and one private: 192.168.100.173 I tried creating a jail using ezjail and this does not work out. [root@mambo /usr/src]# ezjail-admin update -p -i Error: Cannot find your copy of the FreeBSD source tree in . Consider using 'ezjail-admin install' to create the base jail from an ftp server. [root@mambo /usr/src]# I have an updated copy of freebsd 7.1 source tree from SVN in /usr/src/ [root@mambo /usr/src]# svn info Path: . URL: http://svn.freebsd.org/base/release/7.1.0 Repository Root: http://svn.freebsd.org/base Repository UUID: ccf9f872-aa2e-dd11-9fc8-001c23d0bc1f Revision: 243371 Node Kind: directory Schedule: normal Last Changed Author: kensmith Last Changed Rev: 186660 Last Changed Date: 2009-01-01 01:57:14 +0300 (Thu, 01 Jan 2009) [root@mambo /usr/src]# and I did #make buildworld while building the first jail i.e mambo2 Here is an excerpt of ouput of ezjail-admin install ... 221 Goodbye. Trying 193.162.146.4... Connected to ftp.freebsd.org. 220 ftp.beastie.tdk.net FTP server (Version 6.00LS) ready. 331 Guest login ok, send your email address as password. 230 Guest login ok, access restrictions apply. Remote system type is UNIX. Using binary mode to transfer files. 200 Type set to I. 550 pub/FreeBSD-Archive/old-releases/i386/7.1-RELEASE/base: No such file or directory. 221 Goodbye. Could not fetch base from ftp.freebsd.org. Maybe your release (7.1-RELEASE) is specified incorrectly or the host ftp.freebsd.org does not provide that release build. Use the -r option to specify an existing release or the -h option to specify an alternative ftp server. Querying your ftp-server... The ftp server you specified (ftp.freebsd.org) seems to provide the following builds: Trying 193.162.146.4... total 10 drwxrwxr-x 13 1006 1006 512 Feb 20 2011 8.2-RELEASE drwxrwxr-x 13 1006 1006 512 Apr 10 2012 8.3-RELEASE lrwxr-xr-x 1 1006 1006 16 Jan 7 2012 9.0-RELEASE -> i386/9.0-RELEASE drwxrwxr-x 7 1006 1006 1024 Feb 19 2012 ISO-IMAGES -rw-rw-r-- 1 1006 1006 637 Nov 23 2005 README.TXT drwxrwxr-x 5 1006 1006 512 Nov 2 02:59 i386 I do not want to upgrade my freebsd installation. I have googled around; but all in vail. Thank you

  Read the article

• After each command tmux prints: ps1_update: command not found

  - by B.I.

  On Linux Ubuntu 11.04, after each command (cd, ls, vim...) successful or not, tmux prints out as a last line ps1_update: command not found. Is there any config option I am missing? Thank you very much! tmux.conf # http://lukaszwrobel.pl/blog/tmux-tutorial-split-terminal-windows-easily # just remember that after every modification, tmux must be refreshed # to take new settings into account. # This can be achieved either by restarting it or by typing in: # tmux source-file .tmux.conf # Here is a list of a few basic tmux commands: # Ctrl+b " - split pane horizontally. # Ctrl+b % - split pane vertically. # Ctrl+b arrow key - switch pane. # Hold Ctrl+b, don't release it and hold one of the arrow keys - resize pane. # !Ctrl+b c - (c)reate a new window. # !Ctrl+b n - move to the (n)ext window. # Ctrl+b p - move to the (p)revious window. # Shift+LMB - select text. # ALT+Arrows to move among panes. # rebind default prefix to C-a unbind C-b set -g prefix C-a # use ALT+Arrows to move around panes bind -n M-Left select-pane -L bind -n M-Right select-pane -R bind -n M-Up select-pane -U bind -n M-Down select-pane -D # activity monitoring setw -g monitor-activity on set -g visual-activity on # highlight current pane set-window-option -g window-status-current-bg yellow # enable pane switching with mouse set-option -g mouse-select-pane on # read bashrc source ~/.bashrc # Sane scrolling set -g terminal-overrides 'xterm*:smcup@:rmcup@' commandline print out ($(cat)user@tiki:~/.vim$ ls autoload bash_profile bashrc bundle README.md tmux.conf vimrc xmonad xmonad-ubuntu-conf xsessionrc ps1_update: command not found ($(cat)user@tiki:~/.vim$ ll total 56 drwxrwxr-x 2 user user 4096 Mar 17 10:20 autoload/ -rw-rw-r-- 1 user user 170 Mar 17 10:20 bash_profile -rw-rw-r-- 1 user user 4004 Apr 2 11:37 bashrc drwxrwxr-x 20 user user 4096 Aug 20 10:55 bundle/ -rw-rw-r-- 1 user user 11170 Aug 20 11:24 README.md -rw-rw-r-- 1 user user 1243 Mar 17 10:20 tmux.conf ps1_update: command not found ($(cat)user@tiki:~/.vim$ And the following is plain terminal output, without tmux running user@tiki:~$ ls backup_list.md Documents Dropbox examples.desktop hakers_and_painters.md~ hyundai Music projects ror Ubuntu One Videos windows.sh Desktop Downloads elif.txt hakers_and_painters.md help.txt maqola.txt Pictures Public tmp update_background.sh VirtualBox VMs user@tiki:~$ ll total 116 -rw-rw-r-- 1 user user 380 Aug 9 17:34 backup_list.md drwxr-xr-x 6 user user 4096 Jul 15 09:26 Desktop/ drwxr-xr-x 2 user user 4096 Jul 7 11:26 Documents/ drwxr-xr-x 11 user user 20480 Aug 20 13:53 Downloads/ -rwx------ 1 user user 729 May 7 14:45 update_background.sh* drwxr-xr-x 2 user user 4096 Dec 10 2013 Videos/ drwxrwxr-x 4 user user 4096 Sep 10 2013 VirtualBox VMs/ -rwxrwxr-x 1 user user 36 Jan 11 2014 windows.sh* user@tiki:~$ cd Desktop/ user@tiki:~/Desktop$ ll total 36 -rw-rw-r-- 1 user user 3388 Jul 14 17:10 daily--report.md -rw-rw-r-- 1 user user 71 Jan 28 2014 fernandez readme.md -rw-rw-r-- 1 user user 23 Jan 28 2014 fernandez readme.md~ drwx------ 4 user user 4096 Mar 23 14:02 my_docs/ drwx------ 2 user user 4096 Feb 3 2014 Origami/ drwx------ 7 user user 4096 Feb 1 2013 Plants_vs._Zombies_v1.2.0.1065/ -rwxr-xr-x 1 user user 301 Apr 15 11:28 Sky Fight.desktop* drwx------ 2 user user 4096 Feb 11 2014 webdesign/ -rwxrwxr-x 1 user user 26 Jan 11 2014 windows.sh~* user@tiki:~/Desktop$

  Read the article

• Too many Bind query (cache) denied, DNS attack?

  - by Jake

  Once Bind crashed and I did: tail -f /var/log/messages I see a massive number of logs every second. Is this a DNS attack? or is there something wrong? Sometimes I see a domain in logs like this: dOmAin.com (upper and lower). As you see there is only one single domain in the logs with different IPs Oct 10 02:21:26 mail named[20831]: client 74.125.189.18#38921: query (cache) 'ns1.domain2.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 192.221.144.171#38833: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 74.125.189.17#42428: query (cache) 'ns2.domain2.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 192.221.146.27#37899: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 193.203.82.66#39263: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 8.0.16.170#59723: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 80.169.197.66#32903: query (cache) 'dOmAin.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 134.58.60.1#47558: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 192.221.146.34#47387: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 8.0.16.8#59392: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 74.125.189.19#64395: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 217.72.163.3#42190: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 83.146.21.252#22020: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 192.221.146.116#57342: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 193.203.82.66#52020: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 8.0.16.72#64317: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 80.169.197.66#31989: query (cache) 'dOmAin.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 74.125.189.18#47436: query (cache) 'ns2.domain2.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 74.125.189.16#44005: query (cache) 'ns1.domain2.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 85.132.31.10#50379: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 94.241.128.3#60106: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 85.132.31.10#59118: query (cache) 'domain.com/A/IN' denied Oct 10 02:21:26 mail named[20831]: client 212.95.135.78#27811: query (cache) 'domain.com/A/IN' denied /etc/resolv.conf ; generated by /sbin/dhclient-script nameserver 4.2.2.4 nameserver 8.8.4.4 Bind config: // generated by named-bootconf.pl options { directory "/var/named"; /* * If there is a firewall between you and nameservers you want * to talk to, you might need to uncomment the query-source * directive below. Previous versions of BIND always asked * questions using port 53, but BIND 8.1 uses an unprivileged * port by default. */ // query-source address * port 53; allow-transfer { none; }; allow-recursion { localnets; }; //listen-on-v6 { any; }; notify no; }; // // a caching only nameserver config // controls { inet 127.0.0.1 allow { localhost; } keys { rndckey; }; }; zone "." IN { type hint; file "named.ca"; }; zone "localhost" IN { type master; file "localhost.zone"; allow-update { none; }; }; zone "0.0.127.in-addr.arpa" IN { type master; file "named.local"; allow-update { none; }; };

  Read the article

• libvirt upgrade caused vms to not see drives (boot media not found)

  - by bias

  I upgraded to Ubuntu 12.04.1 and now libvirt (via open nebula) successfully runs vms but they aren't finding the 2 drives (specifically, the boot drive). One is "hd" the other is "cdrom". The machine boots but fails and displays something like "boot media not found hd" (this was in a vnc terminal and I didn't copy the output anywhere so that's not the verbatim message). I tried constructing a new disk using the new version of qemu (via vmbuilder) and this new machine has the same problem as the old machine. In case it matters (I can't see why it would) I'm using open nebula to manage the machines. There's nothing relevant in any of the logs: syslog, libvirtd, oned. Which is to say nothing interesting/anomalous is reported when the machine is brought up. Versions libvirt 0.9.8-2ubuntu17.4 qemu-kvm 1.0+noroms-0ubuntu14.3 The libvirt xml config portions (relavent) <os> <type arch='x86_64' machine='pc-1.0'>hvm</type> <boot dev='hd'/> </os> ... <devices> <emulator>/usr/bin/kvm</emulator> <disk type='file' device='disk'> <driver name='qemu' type='qcow2'/> <source file='/var/lib/one//203/images/disk.0'/> <target dev='sda' bus='scsi'/> <alias name='scsi0-0-0'/> <address type='drive' controller='0' bus='0' unit='0'/> </disk> <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <source file='/var/lib/one//203/images/disk.1'/> <target dev='sdc' bus='scsi'/> <readonly/> <alias name='scsi0-0-2'/> <address type='drive' controller='0' bus='0' unit='2'/> </disk> <controller type='scsi' index='0'> <alias name='scsi0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </controller> <memballoon model='virtio'> <alias name='balloon0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> </memballoon> ... </devices> The libvirt/qemu log contains 2012-11-25 22:19:24.328+0000: starting up LC_ALL=C PATH=/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/sbin:/sbin:/bin QEMU_AUDIO_DRV=none /usr/bin/kvm -S -M pc-1.0 -enable-kvm -m 256 -smp 1,sockets=1,cores=1,threads=1 -name one-204 -uuid 4be6c276-19e8-bdc2-e9c9-9ca5352f2be3 -nodefconfig -nodefaults -chardev socket,id=charmonitor,path=/var/lib/libvirt/qemu/one-204.monitor,server,nowait -mon chardev=charmonitor,id=monitor,mode=control -rtc base=utc -no-shutdown -device lsi,id=scsi0,bus=pci.0,addr=0x5 -drive file=/var/lib/one//204/images/disk.0,if=none,id=drive-scsi0-0-0,format=qcow2 -device scsi-disk,bus=scsi0.0,scsi-id=0,drive=drive-scsi0-0-0,id=scsi0-0-0,bootindex=1 -drive file=/var/lib/one//204/images/disk.1,if=none,media=cdrom,id=drive-scsi0-0-2,readonly=on,format=raw -device scsi-disk,bus=scsi0.0,scsi-id=2,drive=drive-scsi0-0-2,id=scsi0-0-2 -netdev tap,fd=18,id=hostnet0 -device rtl8139,netdev=hostnet0,id=net0,mac=02:00:c0:a8:00:68,bus=pci.0,addr=0x3 -netdev tap,fd=19,id=hostnet1 -device rtl8139,netdev=hostnet1,id=net1,mac=02:00:ad:f0:1b:94,bus=pci.0,addr=0x4 -usb -vnc 0.0.0.0:204 -vga cirrus -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x6 kvm: -device rtl8139,netdev=hostnet0,id=net0,mac=02:00:c0:a8:00:68,bus=pci.0,addr=0x3: pci_add_option_rom: failed to find romfile "pxe-rtl8139.rom" kvm: -device rtl8139,netdev=hostnet1,id=net1,mac=02:00:ad:f0:1b:94,bus=pci.0,addr=0x4: pci_add_option_rom: failed to find romfile "pxe-rtl8139.rom"

  Read the article

• amplified reflected attack on dns

  - by Mike Janson

  The term is new to me. So I have a few questions about it. I've heard it mostly happens with DNS servers? How do you protect against it? How do you know if your servers can be used as a victim? This is a configuration issue right? my named conf file include "/etc/rndc.key"; controls { inet 127.0.0.1 allow { localhost; } keys { "rndc-key"; }; }; options { /* make named use port 53 for the source of all queries, to allow * firewalls to block all ports except 53: */ // query-source port 53; /* We no longer enable this by default as the dns posion exploit has forced many providers to open up their firewalls a bit */ // Put files that named is allowed to write in the data/ directory: directory "/var/named"; // the default pid-file "/var/run/named/named.pid"; dump-file "data/cache_dump.db"; statistics-file "data/named_stats.txt"; /* memstatistics-file "data/named_mem_stats.txt"; */ allow-transfer {"none";}; }; logging { /* If you want to enable debugging, eg. using the 'rndc trace' command, * named will try to write the 'named.run' file in the $directory (/var/named"). * By default, SELinux policy does not allow named to modify the /var/named" directory, * so put the default debug log file in data/ : */ channel default_debug { file "data/named.run"; severity dynamic; }; }; view "localhost_resolver" { /* This view sets up named to be a localhost resolver ( caching only nameserver ). * If all you want is a caching-only nameserver, then you need only define this view: */ match-clients { 127.0.0.0/24; }; match-destinations { localhost; }; recursion yes; zone "." IN { type hint; file "/var/named/named.ca"; }; /* these are zones that contain definitions for all the localhost * names and addresses, as recommended in RFC1912 - these names should * ONLY be served to localhost clients: */ include "/var/named/named.rfc1912.zones"; }; view "internal" { /* This view will contain zones you want to serve only to "internal" clients that connect via your directly attached LAN interfaces - "localnets" . */ match-clients { localnets; }; match-destinations { localnets; }; recursion yes; zone "." IN { type hint; file "/var/named/named.ca"; }; // include "/var/named/named.rfc1912.zones"; // you should not serve your rfc1912 names to non-localhost clients. // These are your "authoritative" internal zones, and would probably // also be included in the "localhost_resolver" view above :

  Read the article

• I have a NGINX server configured to work with node.js, but many times a file of 1.03MB of js is not loaded by various browser and various pc

  - by Totty

  I'm using this in a local LAN so it should be quite fast. The nginx server use the node.js server to serve static files, so it must pass throught node.js to download the files, but that is not a problem when I'm not using the nginx. In chrome with debugger on I can see that the status is: 206 - partial content and it only has downloaded 31KB of 1.03MB. After 1.1 min it turns red and the status failed. Waiting time: 6ms Receiving: 1.1 min The headers in google chrom: Request URL:http://192.168.1.16/production/assembly/script/production.js Request Method:GET Status Code:206 Partial Content Request Headersview source Accept:*/* Accept-Charset:ISO-8859-1,utf-8;q=0.7,*;q=0.3 Accept-Encoding:gzip,deflate,sdch Accept-Language:pt-PT,pt;q=0.8,en-US;q=0.6,en;q=0.4 Connection:keep-alive Cookie:connect.sid=s%3Abls2qobcCaJ%2FyBNZwedtDR9N.0vD4Fi03H1bEdCszGsxIjjK0lZIjJhLnToWKFVxZOiE Host:192.168.1.16 If-Range:"1081715-1350053827000" Range:bytes=16090-16090 Referer:http://192.168.1.16/production/assembly/ User-Agent:Mozilla/5.0 (Windows NT 6.0) AppleWebKit/537.4 (KHTML, like Gecko) Chrome/22.0.1229.94 Safari/537.4 Response Headersview source Accept-Ranges:bytes Cache-Control:public, max-age=0 Connection:keep-alive Content-Length:1 Content-Range:bytes 16090-16090/1081715 Content-Type:application/javascript Date:Mon, 15 Oct 2012 09:18:50 GMT ETag:"1081715-1350053827000" Last-Modified:Fri, 12 Oct 2012 14:57:07 GMT Server:nginx/1.1.19 X-Powered-By:Express My nginx configurations: File 1: user totty; worker_processes 4; pid /var/run/nginx.pid; events { worker_connections 768; # multi_accept on; } http { ## # Basic Settings ## sendfile on; tcp_nopush on; tcp_nodelay on; keepalive_timeout 65; types_hash_max_size 2048; # server_tokens off; # server_names_hash_bucket_size 64; # server_name_in_redirect off; include /etc/nginx/mime.types; default_type application/octet-stream; ## # Logging Settings ## access_log /home/totty/web/production01_server/node_modules/production/_logs/_NGINX_access.txt; error_log /home/totty/web/production01_server/node_modules/production/_logs/_NGINX_error.txt; ## # Gzip Settings ## gzip on; gzip_disable "msie6"; # gzip_vary on; # gzip_proxied any; # gzip_comp_level 6; # gzip_buffers 16 8k; # gzip_http_version 1.1; # gzip_types text/plain text/css application/json application/x-javascript text/xml application/xml application/xml+rss text/javascript; ## # nginx-naxsi config ## # Uncomment it if you installed nginx-naxsi ## #include /etc/nginx/naxsi_core.rules; ## # nginx-passenger config ## # Uncomment it if you installed nginx-passenger ## #passenger_root /usr; #passenger_ruby /usr/bin/ruby; ## # Virtual Host Configs ## autoindex on; include /home/totty/web/production01_server/_deployment/nginxConfigs/server/*; } File that is included by the previous file: server { # custom location for entry # using only "/" instead of "/production/assembly" it # would allow you to go to "thatip/". In this way # we are limiting to "thatip/production/assembly/" location /production/assembly/ { # ip and port used in node.js proxy_pass http://127.0.0.1:3000/; } location /production/assembly.mongo/ { proxy_pass http://127.0.0.1:9000/; proxy_redirect off; } location /production/assembly.logs/ { autoindex on; alias /home/totty/web/production01_server/node_modules/production/_logs/; } }

  Read the article

• Backup, Migrate or Clone Failing CentOS 4 (LVM)

  - by Hegelworm

  I've been running a BlueQuartz CentOS 4 system (Nuonce.net distro) for a few years now and although the hard drive (Deskstar) has always been a bit noisy, on a few recent occasions I've heard it having trouble spinning up. Basically, I want to clone this drive to a similar sized one (80 Gig). I've spent many hours reading upon dd, dd_rescue, rsync, clonezilla and LVM mirroring yet the sheer number of options and nightmarish accounts has left me frozen - unable to make an informed decision as to how to start. I've made a few attempts. dd failed after about 2 hours, as, although the drives appeared to be identical on the surface (ATA Seagate Barracudas, Thai not Chinese), the destination drive is slightly smaller. My most recent attempt involved using a Debian CD to format the new drive and then rsync-ing everything over and editing the new drive's grub and fstab to reflect the changes. No joy here either as I hadn't chosen LVM when partitioning the destination drive and it wouldn't boot. As you can probably tell, I'm out of my depth here and a panic-invoking mixture of caution and frustration has prompted me to sign up here. The server itself, although not strictly a production environment, has a very specific installation of Festival, LAME and ffMpeg and provides the back-end for a Text-to-Speech jQuery plugin that I've built over the last 2 years. I'm also planning to rebuild the whole TTS system on Debian as the existing CentOS system still has PHP4 etc. For now though, I'd really like to just shift everything over to a new drive. As this is my first post, please feel free to lay any house rules on me that I might've overlooked; I've been hovering around StackOverflow for a while now but have only just signed up. Many thanks. Update: Thanks for your responses so far - it's much appreciated and makes me feel a little more confident when I can double-check things here. I had the idea of doing a fresh install of CentOS (from the original disk) on the new drive so the partitions and LVM were all set up correctly (after disconnecting my source drive to prevent painful mistakes). I then booted into rescue mode from the same CD, and, to avoid a conflicting label, changed the /boot partition's label using e2label to /bootnew. I then changed the VolGroup name using lvm vgrename from VolGroup00 to VolGroup001. I could then boot with both drives in. After mounting the new drive (via its VolGroup001 alias) into /newhd, I rsync-ed over everything I could to the new drive, using -avr switches and backslashes. Like mentioned here. I then disconnected my original source drive again, booted from the liveCD again, changed back the boot partition label from /bootnew to /boot using e2label and then renamed the VolGroup back to VolGroup00. I then rebooted and it went through the familiar start-up routine only to not find a host of files in proc, usr, lib, var etc. The boot did complete but there were lots of red 'FAILS'. I could log in with my existing creds, but the network was kaput, I couldn't startX (desktop GUI) and there were also a few (a lot) of error messages pertaining to iptables. Back to square one. I naively thought I'd nailed it. Shall I just buy a bigger hard drive and attempt the dd route? I've read that this can mess with LVM setups and there's the added risk of working on two unmounted drives at once with a low-level tool. Thanks again.

  Read the article

• How to use iptables to forward all data from an IP to a Virtual Machine

  - by jro

  OK, in an attempt to get some response, a TL;DR version. I know that the following command: iptables -A PREROUTING -t nat -i eth0 --dport 80 --source 1.1.1.1 -j REDIRECT --to-port 8080 ... will redirect all traffic from port 80 to port 8080. The problem is that I have to do this for every port that is to be redirected. To be future-proof, I want all ports for an IP to be redirected to a different (internal) IP, so that if one might decide to enable SSH, they can directly connect without worrying about iptables. What is needed to reliable forward all traffic from an external IP, to an internal IP, and vice versa? Extended version I've scoured the internet for this, but I never got a solid answer. What I have is one physical server (HOST), with several virtual machines (VM) that need traffic redirected to them. Just getting it to work with a single machine is enough for now. The VM's run under VirtualBox, and are set to use a host-only adapter (vboxnet0). Everything seems to work, but it is greatly lagging. Both the host (CentOS 5.6) and the guest (Ubuntu 10.04) machine are running Linux. What I did was the following: Configure the VM to have a static IP in the network of the vboxnet0 adapter. Add an IP alias to the host, registering to the dedicated (outside) IP. Setup iptables to allow traffic to come through (via sysctl). Configure iptables to DNAT and SNAT data from a given IP address to the internal address. iptables commands: sudo iptables -A FORWARD -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT sudo iptables -A POSTROUTING -t nat -j MASQUERADE iptables -t nat -I PREROUTING -d $OUT_IP -I eth0 -j DNAT --to-destination $IN_IP iptables -t nat -I POSTROUTING -s $IN_IP -o eth0 -j SNAT --to-source $OUT_IP Now the site works, but is really, really slow. I'm hoping I missed something simple, but I'm out of ideas for now. Some background info: before this, the site was working with basic port forwarding. E.g. port 80 was mapped to port 8080 using iptables. In VirtualBox (having the network adapter configured as NAT), a port forwarding the other way around made things work beautifully. The problem was twofold: first, multiple ports needed to be forwarded (for admin interfaces, https, ssh, etc). Second, it only allowed one IP address to use port 80. To resolve things, multiple external IP addresses are used for different (sub)domains. Likewise, the "VirtualBox" network will contain the virtual machines: DNS Ext. IP Adapter VM "VirtalBox" IP ------------------------------------------------------------------ a.example.com 1.1.1.1 eth0:1 vm_guest_1 192.168.56.1 b.example.com 2.2.2.2 eth0:2 vm_guest_2 192.168.56.2 c.example.com 3.3.3.3 eth0:3 vm_guest_3 192.168.56.3 And so on. Put simply, the goal is to channel all traffic from a.example.com to vm_guest_1 (of put differently, from 1.1.1.1 to 192.168.56.1). And achieve this with an acceptable speed :).

  Read the article

• How broken is routing strategy that causes a martian packet (so far only) during tracepath?

  - by lkraav

  I believe I've achieved a table that routes packets from and to eth1/192.168.3.x through 192.168.3.1, and packets from and to eth0/192.168.1.x through 192.168.1.1 (helpful source). Question: when doing tracepath from 192.168.3.20 (from within vserver), I'm getting kernel: [318535.927489] martian source 192.168.3.20 from 212.47.223.33, on dev eth0 at or near the target IP, while intermediary hops go without (log below). I don't understand why this packet is arriving on eth0, instead of eth1, even after reading this: Note that you may see packets from non-routable IP addresses when running the traceroute or tracepath commands. While packets cannot be routed to these routers, packets sent between 2 routers only need to know the address of the next hop within the local networks, which could be a non-routable address. Can someone explain that paragraph in human language? Based on short initial trials so far, everything else seems to work without causing martians. Is this contained to the nature of tracepath operation or do I have some other bigger routing problem that will cause work traffic breakage? Side note: is it possible to inspect martian packet with tcpdump or wireshark or anything of the sort? I'm have not been able to get it to show up on my own. vserver-20 / # tracepath -n 212.47.223.33 1: 192.168.3.2 0.064ms pmtu 1500 1: 192.168.3.1 1.076ms 1: 192.168.3.1 1.259ms 2: 90.191.8.2 1.908ms 3: 90.190.134.194 2.595ms 4: 194.126.123.94 2.136ms asymm 5 5: 195.250.170.22 2.266ms asymm 6 6: 212.47.201.86 2.390ms asymm 7 7: no reply 8: no reply 9: no reply ^C Host routing: $ sudo ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo 2: sit0: <NOARP> mtu 1480 qdisc noop state DOWN link/sit 0.0.0.0 brd 0.0.0.0 3: eth0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:24:1d:de:b3:5d brd ff:ff:ff:ff:ff:ff inet 192.168.1.2/24 scope global eth0 4: eth1: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:0c:46:46:a3:6a brd ff:ff:ff:ff:ff:ff inet 192.168.3.2/27 scope global eth1 inet 192.168.3.20/27 brd 192.168.3.31 scope global secondary eth1 # linux-vserver instance $ sudo ip route default via 192.168.1.1 dev eth0 metric 3 unreachable 127.0.0.0/8 scope host 192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.2 192.168.3.0/27 dev eth1 proto kernel scope link src 192.168.3.2 $ sudo ip rule 0: from all lookup local 32764: from all to 192.168.3.0/27 lookup dmz 32765: from 192.168.3.0/27 lookup dmz 32766: from all lookup main 32767: from all lookup default $ sudo ip route show table dmz default via 192.168.3.1 dev eth1 metric 4 192.168.3.0/27 dev eth1 scope link metric 4 Gateway routing # ip route 10.24.0.2 dev tun0 proto kernel scope link src 10.24.0.1 10.24.0.0/24 via 10.24.0.2 dev tun0 192.168.3.0/24 dev br-dmz proto kernel scope link src 192.168.3.1 192.168.1.0/24 dev br-lan proto kernel scope link src 192.168.1.1 $ISP_NET/23 dev eth0.1 proto kernel scope link src $WAN_IP default via $ISP_GW dev eth0.1 Additional background Options for non-virtualized network interface isolation?

  Read the article

• How to programmatically add x509 certificate to local machine store using c#

  - by David

  I understand the question title may be a duplicate but I have not found an answer for my situation yet so here goes; I have this simple peice of code // Convert the Filename to an X509 Certificate X509Certificate2 cert = new X509Certificate2(certificateFilePath); // Get the server certificate store X509Store store = new X509Store(StoreName.TrustedPeople, StoreLocation.LocalMachine); store.Open(OpenFlags.MaxAllowed); store.Add(cert); // x509 certificate created from a user supplied filename But keep being presented with an "Access Denied" exception. I have read some information that suggests using StorePermissions would solve my issue but I don't think this is relevant in my code. Having said that, I did test it to to be sure and I couldn't get it to work. I also found suggestions that changing folder permissions within Windows was the way to go and while this may work(not tested), it doesn't seem practical for what will become distributed code. I also have to add that as the code will be running as a service on a server, adding the certificates to the current user store also seems wrong. Is there anyway to programmatically add a certificate into the local machine store?

  Read the article

• Exception "The operation is not valid for the state of the transaction" using TransactionScope

  - by Lanfear

  We have a web service on server #1 and a database on server #2. Web service uses transaction scope to produce distributed transaction. Everything is correct. And we have another database on server #3. We had some problems with this server and we reinstalled operation system and software. We configured MSDTC and tried to use web service from server #1 to communicate with database on this server. And now after first select statement within transaction scope we get: "The operation is not valid for the state of the transaction". This exception falls in every web service request if it is using transaction scope. Server #2 and Server #3 is almost similar. The difference can be only in settings. .NET framework 3.5 SP1 installed and SQL Server SP3 on all servers. Full stacktrace: System.Transactions.TransactionState.EnlistPromotableSinglePhase(InternalTransaction tx, IPromotableSinglePhaseNotification promotableSinglePhaseNotification, Transaction atomicTransaction) ? System.Transactions.Transaction.EnlistPromotableSinglePhase(IPromotableSinglePhaseNotification promotableSinglePhaseNotification) ? System.Data.SqlClient.SqlInternalConnection.EnlistNonNull(Transaction t ? System.Data.SqlClient.SqlInternalConnection.Enlist(Transaction t ? System.Data.SqlClient.SqlInternalConnectionTds.Activate(Transaction transaction) ? System.Data.ProviderBase.DbConnectionInternal.ActivateConnection(Transaction transaction) ? System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) ? System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) ? System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) ? System.Data.SqlClient.SqlConnection.Open() ? NHibernate.Connection.DriverConnectionProvider.GetConnection() ? NHibernate.Impl.SessionFactoryImpl.OpenConnection() I searched this message but didn't found any appropriate solution. So what settings should I check and what exactly should I do to fix it?

  Read the article

• iPhone: Software Development And Distribution

  - by xsl

  I have a few quick questions about the iPhone software development. I did some research about the topic, but there are a few specific things I would like to ask here, because I will have to estimate the cost of the required hardware and software, before I am allowed to buy anything. I never did any Mac development nor have I ever owned an iPhone, so needless to say this is quite hard for me. I will buy an iMac mini with 2 GB RAM for iPhone development. I will have to use it at the same time as my regular PC, but the majority of the time I won't use the Mac at all. Do I have to buy an additional monitor, a mouse and a keyboard or is there a better solution? I will have to port a C library to the iPhone platform and develop an iPhone application that uses the ported library. Do I need anything else than the iPhone SDK to do this? If I use an external library (see above), can I test the application with the integrated emulator, or is it recommend to buy the device? In a later phase of the project I will have to buy an iPhone, but I will have to wait until the iPhone 4 is released here in Europe, because the application requires a camera. In addition to this I will have to send data to a remote webservice. Aside from these two things I don't require any other features. Can I just buy the iPhone online from another country (the iPhones here are sim locked), or should I buy one with a contract? When the application is ready, it will be installed on a few iPhones owned by our customer. Because of security reasons it is crucial that there is no third party involved in this process (i.e. the application should not be distributed on the app store). Is this possible?

  Read the article

• Notification Email Best Practices--From Server Setup to Programming

  - by Andrew Wagner

  All, I'm in the process now of building a SaaS tool that allows network admins to generate notification emails to the members of the end-users of our platform (among many many other things). I'm running into a bit of an "out of my expertise" wall, as I know there are a lot of variables involved with configuring an application that can: Run in a distributed way via load balancing and still-- Leverage a single mail server for sending notification emails Process unsubscribe requests Avoid any ISP blacklisting in the process. If anyone has the time and has done this before, I'd love if you could walk me through the A-Z of best practices both from a configuration perspective and an execution perspective for generating these emails (anything from necessary DNS settings to ideal SMTP setup and configuration) Currently, our application generates email via Google Apps using the PHPMailer class. While this works well, it doesn't queue messages (potential for timeout problems if any of our clients amass a very large list of end-users), and Google limits the amount of allowed generated email messages to 500/day. I know this is a lofty question, but any guidance you could provide would be smashing and a big help as we work through this hurtle in our beta development stage. Thanks!

  Read the article

• Binary serialization/de-serialization in C++ and C#

  - by 6pack kid

  Hello. I am working on a distributed application which has two components. One is written in standard C++ (not managed C++) and the other one is written in C#. Both are communicating via a message bus. I have a situation in which I need to pass objects from C++ to C# application and for this I need to serialize those objects in C++ and de-serialize them in C# (something like marshaling/un-marshaling in .NET). I need to perform this serialization in binary and not in XML (due to performance reasons). I have used Boost.Serialization to do this when both ends were implemented in C++ but now that I have a .NET application on one end, Boost.Serialization is not a viable solution. I am looking for a solution that allows me to perform (de)serialization across C++ and .NET boundary i.e., cross platform binary serialization. I know I can implement the (de)serialization code in a C++ dll and use P/Invoke in the .NET application, but I want to keep that as a last resort. Also, I want to know if I use some standard like gzip, will that be efficient? Are there any other alternatives to gzip? What are the pros/cons of them? Thanks

  Read the article

• Standard Apache (not OHS) with mod_osso for Single Signon

  - by Markos Fragkakis

  The mod_osso.so (the Apache plugin for Single Signon, provided by Oracle) is distributed with the Oracle HTTP Server (OHS), which is essentially a modified Apache. I am trying to use it on the standard Apache HTTP Server, and have not managed to get it to work. Configuration: Apache 2.2.15 OHS from the Oracle Web Tier Tools 11.1.1.2.0 Red Hat Linux 64 bit I have: Included the module in the modules directory (copied from corresponding modules dir in OHS) Included the libraries libiau.so and libclutsh.so.11.1 from Oracle Home. The absence of these libraries produced an error on starting Apache. Produced a osso.conf using the ssoreg.sh tool provided with OID (the LDAP implementation of Oracle) Created the required mod_osso.conf file, which I included in httpd.conf. The error I get when starting Apache is this: # /opt/apache_sso/bin/apachectl -k start httpd: Syntax error on line 1075 of /opt/apache_sso/conf/httpd.conf: Syntax error on line 1 of /opt/apache_sso/conf/mod_osso.conf: Cannot load /opt/apache_sso/modules/mod_osso.so into server: /opt/apache_sso/modules/mod_osso.so: undefined symbol: _audit_authentication_request My mod_osso.conf: # cat /opt/apache_sso/conf/mod_osso.conf LoadModule osso_module modules/mod_osso.so <IfModule mod_osso.c> OssoIdleTimeout off OssoIpCheck on OssoConfigFile conf/osso.conf #Location is the URI you want to protect <Location /myapp> require valid-user #OHS 11g AuthType Osso #OHS 10g AuthType Basic AuthType Osso </Location> </IfModule> Has anyone made mod_osso work on standard Apache HTTP server?

  Read the article

• LINQ-to-SQL: ExecuteQuery(Type, String) populates one field, but not the other

  - by Daniel Schaffer

  I've written an app that I use as an agent to query data from a database and automatically load it into my distributed web cache. I do this by specifying an sql query and a type in a configuration. The code that actually does the querying looks like this: List<Object> result = null; try { result = dc.ExecuteQuery(elementType, entry.Command).OfType<Object>().ToList(); } catch (Exception ex) { HandleException(ex, WebCacheAgentLogEvent.DatabaseExecutionError); continue; } elementType is a System.Type created from the type specified in the configuration (using Type.GetType()), and entry.Command is the SQL query. The specific entity type I'm having an issue with looks like this: public class FooCount { [Column(Name = "foo_id")] public Int32 FooId { get; set; } [Column(Name = "count")] public Int32 Count { get; set; } } The SQL query looks like this: select foo_id as foo_id, sum(count) as [count] from foo_aggregates group by foo_id order by foo_id For some reason, when the query is executed, the "Count" property ends up populated, but not the "FooId" property. I tried running the query myself, and the correct column names are returned, and the column names match up with what I've specified in my mapping attributes. Help!

  Read the article

• code review: Is it subjective or objective(quantifiable) ?

  - by Ram

  I am putting together some guidelines for code reviews. We do not have one formal process yet, and trying to formalize it. And our team is geographically distributed We are using TFS for source control (used it for tasks/bug tracking/project management as well, but migrated that to JIRA) with VS2008 for development. What are the things you look for when doing a code review ? These are the things I came up with Enforce FXCop rules (we are a Microsoft shop) Check for performance (any tools ?) and security (thinking about using OWASP- code crawler) and thread safety Adhere to naming conventions The code should cover edge cases and boundaries conditions Should handle exceptions correctly (do not swallow exceptions) Check if the functionality is duplicated elsewhere method body should be small(20-30 lines) , and methods should do one thing and one thing only (no side effects/ avoid temporal coupling -) Do not pass/return nulls in methods Avoid dead code Document public and protected methods/properties/variables What other things do you generally look for ? I am trying to see if we can quantify the review process (it would produce identical output when reviewed by different persons) Example: Saying "the method body should be no longer than 20-30 lines of code" as opposed to saying "the method body should be small" Or is code review very subjective ( and would differ from one reviewer to another ) ? The objective is to have a marking system (say -1 point for each FXCop rule violation,-2 points for not following naming conventions,2 point for refactoring etc) so that developers would be more careful when they check in their code.This way, we can identify developers who are consistently writing good/bad code.The goal is to have the reviewer spend about 30 minutes max, to do a review (I know this is subjective, considering the fact that the changeset/revision might include multiple files/huge changes to the existing architecture etc , but you get the general idea, the reviewer should not spend days reviewing someone's code) What other objective/quantifiable system do you follow to identify good/bad code written by developers? Book reference: Clean Code: A handbook of agile software craftmanship by Robert Martin

  Read the article

• [OffTopic] PhD is it worth it?

  - by Zenzen

  So I'll be graduating next year (hopefully) and lately I started thinking about getting a PhD in computer science (to be more precise I was thinking about something related to "distributed systems", don't have any specific topics yet in mind), but is it really worth it? A PhD course here lasts 4 years and is free IF you're doing the "normal one" (which means you have class from monday to friday) OR you have to pay if you want to study on the weekends. So I've been thinking about getting a normal full time job (as a JEE programmer) and doing my PhD during the weekends OR doing the normal PhD course (mon-fri) and getting a part time job as a software dev (the main reason I want a job is simple - I need to eat). That would give me practical working experience and theoretical knowledge+a PhD, but it would also mean working 7days a week from 9 to 5 for 4 years straight (sounds like an overkill). Is it, job wise, really worth getting a PhD? As an employer do you prefer people with PhDs or MScs? This might be kinda important - I'm not from the US or western europe, how are PhDs from other countries (I am graduating one of the best, if not the best, school in my country but it's still a central european country...) seen? Are they useless? I won't hide it - after graduation I am thinking about moving abroad.

  Read the article

• System.Web.Caching vs. Enterprise Library Caching Block

  - by ESV

  For a .NET component that will be used in both web applications and rich client applications, there seem to be two obvious options for caching: System.Web.Caching or the Ent. Lib. Caching Block. What do you use? Why? System.Web.Caching Is this safe to use outside of web apps? I've seen mixed information, but I think the answer is maybe-kind-of-not-really. a KB article warning against 1.0 and 1.1 non web app use The 2.0 page has a comment that indicates it's OK: http://msdn.microsoft.com/en-us/library/system.web.caching.cache(VS.80).aspx Scott Hanselman is creeped out by the notion The 3.5 page includes a warning against such use Rob Howard encouraged use outside of web apps I don't expect to use one of its highlights, SqlCacheDependency, but the addition of CacheItemUpdateCallback in .NET 3.5 seems like a Really Good Thing. Enterprise Library Caching Application Block other blocks are already in use so the dependency already exists cache persistence isn't necessary; regenerating the cache on restart is OK Some cache items should always be available, but be refreshed periodically. For these items, getting a callback after an item has been removed is not very convenient. It looks like a client will have to just sleep and poll until the cache item is repopulated. Memcached for Win32 + .NET client What are the pros and cons when you don't need a distributed cache?

  Read the article

• nth ugly number

  - by Anil Katti

  Numbers whose only prime factors are 2, 3 or 5 are called ugly numbers. Example: 1, 2, 3, 4, 5, 6, 8, 9, 10, 12, 15, ... 1 can be considered as 2^0. I am working on finding nth ugly number. Note that these numbers are extremely sparsely distributed as n gets large. I wrote a trivial program that computes if a given number is ugly or not. For n 500 - it became super slow. I tried using memoization - observation: ugly_number * 2, ugly_number * 3, ugly_number * 5 are all ugly. Even with that it is slow. I tried using some properties of log - since that will reduce this problem from multiplication to addition - but, not much luck yet. Thought of sharing this with you all. Any interesting ideas? Using a concept similar to "Sieve of Eratosthenes" (thanks Anon) for (int i(2), uglyCount(0); ; i++) { if (i % 2 == 0) continue; if (i % 3 == 0) continue; if (i % 5 == 0) continue; uglyCount++; if (uglyCount == n - 1) break; } i is the nth ugly number. Even this is pretty slow. I am trying to find 1500th ugly number.

  Read the article

• wcf configuration for this code

  - by user208081

  I have the following code and would like to convert a lot of code into configuration settings for WCF. As you can see, the code is using wshttpbinding. I appreciate any help on this. try { // Provides a unique network address that a client uses to communicate with a service endpoint. EndpointAddress endpointAddress = new EndpointAddress(new Uri(FAXServiceSettings.Default.FAXReceiveServiceURL)); // Specify the protocols, transports, and message encoders used for communication between the client and the service. // WSHttpBinding represents an interoperable binding that supports distributed transactions and secure, reliable sessions. // Spefically, SOAP message security is enabled for secure transmission of the message content. WSHttpBinding clientBinding = new WSHttpBinding(SecurityMode.Message); clientBinding.OpenTimeout = TimeSpan.FromSeconds(FAXServiceSettings.Default.FAXReceiveServiceOpenTimeoutInSeconds); clientBinding.SendTimeout = TimeSpan.FromSeconds(FAXServiceSettings.Default.FAXReceiveServiceOpenTimeoutInSeconds); // Use the ChannelFactory to enable the creation of channels to the binding and endpoint. using (ChannelFactory<IReceiveFAX> channelFactory = new ChannelFactory<IReceiveFAX>(clientBinding, endpointAddress)) { // Creates a channel of a specified type to a specified endpoint address. IReceiveFAX channel = channelFactory.CreateChannel(); if (channel != null) { try { // Submit the FaxSchedule instance for routing. channel.SubmitFAXForRouting(CreateNewFaxScheduleContainerInstance()); // Explicitly close the channel using the IClientChannel interface. CloseChannel((channel as IClientChannel)); } finally { // Explicitly dispose of the channel using IDisposable interface. DisposeOfChannel((channel as IDisposable)); channel = null; } } // This method causes a CommunicationObject to gracefully transition from any state, other than the Closed state, into the Closed state. The Close method allows any // unfinished work to be completed before returning. For example, finish sending any buffered messages. channelFactory.Close(); } } catch { throw; } Pratik

  Read the article

• Problem with Tapestry palette's arrow icons in IE8

  - by JellyHead

  I'm using Tapestry to create pages for a web app, and have been using the palette component to add/delete items to/from a group. The page looks great in Firefox (Tapestry seems biased towards Firefox), but my customers will all be using Internet Explorer (any versions from 6, 7, & 8) and in IE8, the disabled arrow buttons look awful. In Firefox, they are faded, using an opacity setting of 25%, but this doesn't work in IE8 and instead you get a faded image with an ugly black border around the image. In tapestry-core's stylesheet (default.css), you have the following for a disabled arrow button. DIV.t-palette-controls BUTTON[disabled] IMG { filter: alpha(opacity = 25); -moz-opacity: .25; } These are clearly out of date, as -moz-opacity is no longer supported by Firefox (use opacity: 25 instead). The problem is with filter: "alpha(opacity = 25);". If I remove this, the arrows look fine in IE8, but they are not faded. I got the magic instruction: -ms-filter:"progid:DXImageTransform.Microsoft.Alpha(opacity=25)"; from various websites, but putting this in does not work either - the arrow icons are ugly again. The icon itself (distributed with Tapestry) just seems to be a regular PNG, but I'm not an expert on image formats, so maybe there's a problem there? Anyone else had this problem?

  Read the article

< Previous Page | 567 568 569 570 571 572 573 574 575 576 577 578  | Next Page >