Search Results

Search found 15651 results on 627 pages for 'setup'.

Page 571/627 | < Previous Page | 567 568 569 570 571 572 573 574 575 576 577 578  | Next Page >

• Can I use one virtualbox disk for multiple machines?

  - by mxp

  I'm not sure what search term to use and skimming through the VirtualBox manual didn't help me either, so I ask my two questions here... My setup is this: PC with dual boot into Windows 7 and a Debian operating system (both 64bit). I've created a virtual machine (Kubuntu, 64bit) under Windows and put it's VDI file on a SMB share of my NAS. Then I created a VM under linux using the same settings for memory etc and assigned the existing VDI file to it. My idea was that I could use that virtual machine from Windows and Linux as well. (1) Is this generally something that should work without problems? I noticed that snapshots get me into trouble because they appear to be not visible from the other operating system: The snapshots I took after installing the guest system are not visible under Linux. That's why I shut down the VM after usage and not save its state while it's running. My current problem is this: I have used the VM under Windows first, then under Linux. Now it will only start on Linux. When trying this on Windows the guest OS detects some kind of hard disk error and fails to boot because it cannot mount its drive. Obviously the virtual hard disk won't fail so it must have something to do with me using it under Linux. (2) How can I fix that? Update: It also looks like any changes I made in the VM under Linux have been reset by trying to boot it under Windows. Looks like it's back to the latest snapshot. I'm confused... Update The answer to my first question can be found below. In short: It works, as long as you don't use snapshots. The answer to my second question is this: Under Windows set the VM back to the latest snapshot and then discard the snapshot so it gets merged. There should be no snapshots left at the end. If you have multiple snapshots, discard the earliest ones first (Snapshot 1, then 2, 3, ...). I'm not sure what happens if you start at the end (.., 3, 2, 1). This of course leads to some data loss since you revert all changes since the last snapshot. But at least the VM is usable again.

  Read the article

• Slash after domain in URL missing for Rails site

  - by joshee

  After redirecting users in a Rails app, for some reason the slash after the domain is missing. Generated URLs are invalid and I'm forced to manually correct them. The problem only occurs on a subdomain. On a different primary domain (same server), everything works ok. For example, after logging out, the site is directing to https://www.sub.domain.comlogin/ rather than https://www.sub.domain.com/login I suspect the issue has something to do with the vhost setup, but I'm not sure. Here are the broken and working vhosts: BROKEN SUBDOMAIN <VirtualHost *:80> ServerName www.sub.domain.com ServerAlias sub.domain.com Redirect permanent / https://www.sub.domain.com </VirtualHost> <VirtualHost *:443> ServerAdmin [email protected] ServerName www.sub.domain.com ServerAlias sub.domain.com RailsEnv production # SSL Engine Switch SSLEngine on # SSL Cipher Suite: SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL # Server Certificate SSLCertificateFile /path/to/server.crt # Server Private Key SSLCertificateKeyFile /path/to/server.key # Set header to indentify https requests for Mongrel RequestHeader set X_FORWARDED_PROTO "https" BrowserMatch ".*MSIE.*" \ nokeepalive ssl-unclean-shutdown \ downgrade-1.0 force-response-1.0 DocumentRoot /home/usr/www/www.sub.domain.com/current/public/ <Directory "/home/usr/www/www.sub.domain.com/current/public"> AllowOverride all Allow from all Options -MultiViews </Directory> WORKING PRIMARY DOMAIN <VirtualHost *:80> ServerName www.diffdomain.com ServerAlias diffdomain.com Redirect permanent / https://www.diffdomain.com </VirtualHost> <VirtualHost *:443> ServerAdmin [email protected] ServerName www.diffdomain.com ServerAlias diffdomain.com ServerAlias *.diffdomain.com RailsEnv production # SSL Engine Switch SSLEngine on # SSL Cipher Suite: SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL # Server Certificate SSLCertificateFile /path/to/server.crt # Server Private Key SSLCertificateKeyFile /path/to/server.key # Set header to indentify https requests for Mongrel RequestHeader set X_FORWARDED_PROTO "https" BrowserMatch ".*MSIE.*" \ nokeepalive ssl-unclean-shutdown \ downgrade-1.0 force-response-1.0 DocumentRoot /home/usr/www/www.diffdomain.com/current/public/ <Directory "/home/usr/www/www.diffdomain.com/current/public"> AllowOverride all Allow from all Options -MultiViews </Directory> </VirtualHost> Please let me know if there's anything else I could provide that would help determine what's wrong here. UPDATE tried adding a trailing slash to the redirect command, but still no luck.

  Read the article

• Share the same subnet between Internal network and VPN Clients

  - by Pascal

  I would like to set up a configuration where VPN clients connecting to my Forefront TMG can access all the resources of my Internal network without having the to use the option "Use default gateway on remote network" on the VPN's TCP/IP Ipv4 Advanced Settings. This is important to me, since they can use their own internet while accessing my network through VPN (the security implications of this are acceptable on my cenario) My Internal network runs on 10.50.75.x, and I set up Forefront TMG to relay the DHCP of my Internal network to the VPN clients, so they get IPs from the same range as the Internal network. This setup initially works, and the VPN clients use their own internet, and can access anything that is on the internal network. However, after a while, HTTP Proxy Traffic from the Internal network starts getting routed to the IP of the RRAS Dial In Interface, instead of the IP of the Internal's network gateway. When this happens, the HTTP Proxy starts getting denied for obvious reasons. My first question is: does this happen because Forefront TMG wasn't designed to handle a cenario that I described above, and it "loses itself"? My second question is: Is there any way to solve this problem, either through configuration or firewall policies? My third question is: If there's no way that it can work with the cenario above, is there another cenario that will solve my problem, and do what I'd like it to do properly? Below are my network routes: 1 => Local Host Access => Route => Local Host => All Networks 2 => VPN Clients to Internal Network => Route => VPN Clients => Internal 3 => Internet Access => NAT => Internal, Perimeter, VPN Clients => External 4 => Internal to Perimeter => Route => Internal, VPN Clients => Perimeter Tks!

  Read the article

• PHP `virtual()` with Apache MultiViews not working after upgrade to Ubuntu 12.04

  - by Izzy

  I use PHP's virtual() directive quite a lot on one of my sites, including central elements. This worked fine for the last ~10 years -- but after upgrading (or rather moving, as it is on a new machine) to Ubuntu 12.04 it somehow got broken. Example setup (simplified) To make it easier to understand, I simplify some things (contents). So say I need a HTML fragment like <P>For further instructions, please look <A HREF='foobar'>here</P> in multiple pages. 10 years ago, I used SSI for that, so it is put into a file in a central place -- so if e.g. the targeted URL changes, I only need to update it in one place. To serve multiple languages, I have Apache's MultiViews enabled -- and at $DOCUMENT_ROOT/central/ there are the files: foobar.html (English variant, and the default) foobar.html.de (German variant). Now in the PHP code, I simply placed: <? virtual("/central/foobar"); ?> and let Apache take care to deliver the correct language variant. The problem As said, this worked fine for about 10 years: German visitors got the German variant, all others the English (depending on their preferred language). But after upgrading to Ubuntu 12.04, it no longer worked: Either nothing was delivered from the virtual() command, or (in connection with framesets) it even ended up in binary gibberish. Trying to figure out what happens, I played with a lot of things. I first thought MultiViews was (somehow) not available anymore -- but calling http://<server>/central/foobar showed the right variant, depending on the configured language preferences. This also proved there was nothing wrong with file permissions. The error.log gave no clues either (no error message thrown). Finally, just as a "last ressort", I changed the PHP command to <? virtual("central/foobar.html"); ?> -- and that very same file was in fact included. So PHP's virtual() function basically worked -- but the language dependend stuff obviously did no longer work together with it as it did before. Of course I tried to find some change (most likely in PHP's virtual() command), using Google a lot, and also searching the questions here -- unfortunately to no avail. Finally: The question Putting "design questions" aside (surely today I would design things differently -- but at least currently I miss the time to change that for a quite huge amount of pages): What can be done to make it work again? I surely missed something -- but I cannot figure out what...

  Read the article

• How to allow unprivileged apache/PHP to do a root task (CentOS)

  - by Chris

  I am setting up a sort of personal dropbox for our customers on a CentOS 6.3 machine. The server will be accessible thru SFTP and a proprietary http service base on PHP. This machine will be in our DMZ so it has to be secure. Because of this I have apache running as an unprivileged user, hardened the security on apache, the OS, PHP, applied a lot of filtering in iptables and applied some restrictive TCP Wrappers. Now you might have suspected this one was coming, SELinux is also set to enforcing. I'm setting up PAM to use MySQL so my users in the web application can login. These users will all be in a group that can use SSH only for SFTP and users will be chrooted to their own 'home' folder. To allow this SELinux wants the folders to have the user_home_t tag. Also the parent directory needs to be writable by root only. If these restrictions are not met SELinux will kill the SSH pipe immediately. The files that need to be accessible thru both http and SFTP so I have made a SELinux module to allow Apache to search/attr/read/write etc. to directories with the user_home_dir_t tag. As sftp users are stored in MySQL I want to setup their home dirs upon user creation. This is a problem since Apache has no write access to the /home dir, it's only writable by root since it's required to keep SELinux and OpenSSH happy. Basically I need to let Apache do only a few tasks as root and only within /home. So I need to somehow elevate the privileges temporarily or let root do these tasks for apache instead. What I need to have apache do with root privileges is the following. mkdir /home/userdir/ mkdir /home/userdir/userdir chmod -R 0755 /home/userdir umask 011 /home/userdir/userdir chcon -R -t user_home_t /home/userdir chown -R user:sftp_admin /home/userdir/userdir chmod 2770 /home/userdir/userdir This would create a home for the user, now I have an idea that might work, cron. That would mean the server needs to check for users that have no home every minute, then when creating users the interface would freeze for an average of 30 seconds before the account creation can be confirmed which I do not prefer. Does anybody know if something can be done with sudoers? Or any other idea's are welcome... Thanks for your time!

  Read the article

• Have a server, need to figure out a method of backup

  - by PolishHurricane

  My company has an older Dell 2650 server running ArchLinux x64: http://www.dell.com/downloads/global/products/pedge/en/2650_specs.pdf (2 x 2.4GHz Intel Xeon w/around 3287 RAM according to "free -m") We use it to host our internal company site and to post some information from our orders to and we'd like the ability to keep it up as much as possible. What we require: - It needs to always be functional from 8am to 4pm for our data entry person to use it and others to do other things required on it. - If it goes down, we need a quick way to get the machine running again. - If it goes down, we would like to have the data backed up. Some of the major problems include: - The servers old and it may have memory issues - We don't know when one of the hard drives could fail - Our power goes out here once in a while We have a battery backup, but that's pretty much it and it's not for long term. If the server does go down, we have another system in place to store order information that comes in while it's down and repost it when it's back, but we need it up during the day. So we're wondering, what should we get for options? These are the things we thought of, sort of: Setup RAID 1, but that would involve wiping everything right? If we do that, how would we transfer the data over without messing up the server? We could buy an extra server or 2 off eBay for $100, the same model, is that practical or should we get something else? Should we buy a PC or another better server and host off that because it is if anything easier to exchange parts? Should we keep extra parts handy incase it implodes? Should we buy/use backup software? We hear drobo's are cool, but suck. Perhaps there is a software solution to this problem that backs up to another machine or gets us up and running again quickly. Also, if we are to purchase hardware, what is decent? Does anybody know of one for ArchLinux/Linux? We both know a ton about computers but we're kind of unsure what step to take with this, especially with this type of server. Thanks

  Read the article

• Two DHCP Servers, Block Clients for one of them?

  - by Rilindo

  I am building out a kickstart network that resides on a different VLAN uses its own DHCP server. For some reason, my kickstart clients kept getting assign IPs from my primary DHCP server. The way I have it set up is that I have a primary DHCP server on this router here: 192.168.15.1 Connected to that DHCP server is a switch with the IP of 192.168.15.2. My kickstart (Scientific Linux) server is connected to that switch on two ports: Port 2 - where the kickstart server communicates to the rest of the production network via eth0. The IP assigned to the server on that interface is 192.168.15.100 (on eth0). The details are: Interface: eth0 IP: 192.168.15.100 Netmask: 255.255.255.0 Gateway: 192.168.15.1 Port 7 - has it's own VLAN ID (along with port 8). The kickstart server is connected to that port with the IP of 172.16.15.100 (on eth1). Again, the details are: Interface: eth1 IP: 172.16.15.100 Netmask: 255.255.255.0 Gateway: none The kickstart server runs its own DHCP server and assigns them over the eth1. Most of the kick starts are built over the kickstart VLAN through port 8. To prevent the kickstart DHCP server from assigning addresses over the production network, I have the route setup like so: route add -host 255.255.255.255 dev eth1 At this point, the clients kept getting assign IPs from the 192.168.15.1 DHCP server. I need to figure out a way to block client requests from reaching that DHCP. Its should be noted that but I also build KVM hosts on the kickstart server as well, so I need those KVMs to have the ability to get DHCP requests from the 192.168.15.1 DHCP server via the bridge network once I finish resolved this particular problem. (Currently, they communicate via NAT). So what would be done to resolve this? Through iptables or some sort of routing I need to put in? I tried to limited to requests via IPtables on that interface, allowing DHCP requests for 172.16.15.x network: -A INPUT -i eth1 -s 172.16.15.0/24 -p udp -m udp --dport 69 -j ACCEPT -A INPUT -i eth1 -s 172.16.15.0/24 -p tcp -m tcp --dport 69 -j ACCEPT -A INPUT -i eth1 -s 172.16.15.0/24 -p udp -m udp --dport 68 -j ACCEPT -A INPUT -i eth1 -s 172.16.15.0/24 -p tcp -m tcp --dport 68 -j ACCEPT -A INPUT -i eth1 -s 172.16.15.0/24 -p udp -m udp --dport 67 -j ACCEPT -A INPUT -i eth1 -s 172.16.15.0/24 -p tcp -m tcp --dport 67 -j ACCEPT And rejects assignments on eth1 from 192.168.15.x network: -A FORWARD -o eth1 -s 192.168.15.0/24 -p udp -m udp --dport 69 -j REJECT -A FORWARD -o eth1 -s 192.168.15.0/24 -p tcp -m tcp --dport 69 -j REJECT -A FORWARD -o eth1 -s 192.168.15.0/24 -p udp -m udp --dport 68 -j REJECT -A FORWARD -o eth1 -s 192.168.15.0/24 -p tcp -m tcp --dport 68 -j REJECT -A FORWARD -o eth1 -s 192.168.15.0/24 -p udp -m udp --dport 67 -j REJECT -A FORWARD -o eth1 -s 192.168.15.0/24 -p tcp -m tcp --dport 67 -j REJECT Nope. :(

  Read the article

• How to configure sendmail to relay through a specific server

  - by ErebusBat

  I have a tiny home server setup behind my cable modem (bresnan communications). I want to be able for this box to send out email (not receive) for notifications and whatnot. What I have already done: I have installed and configured sendmail. I have added mail.bresnan.net as my SMART_HOST directive. What I belive the problem is When I attempt to send an email I get the following in my mail log: Dec 22 10:24:17 batcave sendmail[1530]: oBMHOHrs001530: from=aburns, size=140, class=0, nrcpts=1, msgid=<[email protected]>, relay=aburns@localhost Dec 22 10:24:17 batcave sm-mta[1531]: oBMHOHWZ001531: from=<[email protected]>, size=397, class=0, nrcpts=1, msgid=<[email protected]>, proto=ESMTP, daemon=MTA-v4, relay=localhost [127.0.0.1] Dec 22 10:24:17 batcave sendmail[1530]: oBMHOHrs001530: to=<[email protected]>, ctladdr=aburns (1000/1000), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=30140, relay=[127.0.0.1] [127.0.0.1], dsn=2.0.0, stat=Sent (oBMHOHWZ001531 Message accepted for delivery) Dec 22 10:24:18 batcave sm-mta[1517]: oBMH9mVv001357: to=<[email protected]>, ctladdr=<[email protected]> (1000/1000), delay=00:14:30, xdelay=00:00:42, mailer=relay, pri=300339, relay=pmx0.bresnan.net. [69.145.248.1], dsn=4.0.0, stat=Deferred: Connection timed out with pmx0.bresnan.net. You can see where the message is accepted for delivery by my sendmail server, then where it attempts to hand off to bresnan's server and it timesout. This is where my question is. Asstute readers will notice that pmx0.bresnan.net is not what I have my SMART_HOST directive set as. This is the (outside?) MX server for the bresnan.com/net domain. Apparently bresnan has their network configured so that you can not access this server from within their own network and instead must use the mail.bresnan.net server (which I can connect to). The problem is that I don't know how to tell sendmail to use this server and not the domain. What I have tried Setting a hosts entry so that the pmx0 server points to the mail IP address. This doesn't work, which makes sense as sendmail is obviously doing an MX query to find the server which returns the IP so there is never a need to do a 'normal' DNS resolve so the hosts file never gets involved.

  Read the article

• Which hardware to VM ratio for Build-Server virtualization?

  - by Martin

  Let's start with saying that I'm a total noob wrt. to server virtualization. That is, I use VMs often during development, but they're simple desktop machine things for me. Now to my problem: We have two (physical) build servers, one master, one slave running Jenkins to do daily tasks and build (Visual C++ Builds) our release packages for our software. As such these machines are critical to our company, because we do lot's releases and without a controlled environment to create them, we can't ship fixes. (And currently there's no proper backup of these machines in place, because they do not hold any data as such - it just would be a major pain to setup them again should they go bust. (But setting up backup that I'd know would work in case of HW failure would even be more pain, so we have skipped that until now.)) Therefore (and for scaling purposes) we would like to go virtual with these machines. Outsourcing to the cloud is not an option, not at all, so we'll have to use on-premises hardware and VM hosts. Each Build-Server (master or slave) is a fully configured (installs, licenses, shares in case of the master, ...) Windows Server box. I would now ideally like to just convert the (two) existing physical nodes to VM images and run them. Later add more VM slave instances as clones of the existing ones. And here begin my questions: Should I go for one VM per one hardware-box or should I go for something where a single hardware runs multiple VMs? That would mean a single point of failure hardware wise and doesn't seem like a good idea ... or?? Since we're doing C++ compilation with Visual Studio, I assume that during a build the hardware (processor cores + disk) will be fully utilized, so going with more than one build-node per hardware doesn't seem to make much sense?? Wrt. to hardware options, does it make any difference which VM software we use (VMWare, MS, Virtualbox, ... ?) (We're using Windows exclusively for our builds.) Regarding budget: We have a normal small company (20 developers) budget for this. ;-) That is, if it's going to cost a few k$ it's going to cost. If it's free - the better. I strongly prefer solutions where there's no multi-k$ maintenance costs per year.

  Read the article

• nginx rewrite rule to convert URL segments to query string parameters

  - by Nick

  I'm setting up an nginx server for the first time, and having some trouble getting the rewrite rules right for nginx. The Apache rules we used were: See if it's a real file or directory, if so, serve it, then send all requests for / to Director.php DirectoryIndex Director.php If the URL has one segment, pass it as rt RewriteRule ^/([a-zA-Z0-9\-\_]+)/$ /Director.php?rt=$1 [L,QSA] If the URL has two segments, pass it as rt and action RewriteRule ^/([a-zA-Z0-9\-\_]+)/([a-zA-Z0-9\-\_]+)/$ /Director.php?rt=$1&action=$2 [L,QSA] My nginx config file looks like: server { ... location / { try_files $uri $uri/ /index.php; } location ~ \.php$ { fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } } How do I get the URL segments into Query String Parameters like in the Apache rules above? UPDATE 1 Trying Pothi's approach: # serve static files directly location ~* ^.+\.(jpg|jpeg|gif|css|png|js|ico|html)$ { access_log off; expires 30d; } location / { try_files $uri $uri/ /Director.php; rewrite "^/([a-zA-Z0-9\-\_]+)/$" "/Director.php?rt=$1" last; rewrite "^/([a-zA-Z0-9\-\_]+)/([a-zA-Z0-9\-\_]+)/$" "/Director.php?rt=$1&action=$2" last; } location ~ \.php$ { fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } This produces the output No input file specified. on every request. I'm not clear on if the .php location gets triggered (and subsequently passed to php) when a rewrite in any block indicates a .php file or not. UPDATE 2 I'm still confused on how to setup these location blocks and pass the parameters. location /([a-zA-Z0-9\-\_]+)/ { fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME ${document_root}Director.php?rt=$1{$args}; include fastcgi_params; } UPDATE 3 It looks like the root directive was missing, which caused the No input file specified. message. Now that this is fixed, I get the index file as if the URL were / on every request regardless of the number of URL segments. It appears that my location regular expression is being ignored. My current config is: # This location is ignored: location /([a-zA-Z0-9\-\_]+)/ { fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_index Director.php; set $args $query_string&rt=$1; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } location / { try_files $uri $uri/ /Director.php; } location ~ \.php$ { fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_index Director.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; }

  Read the article

• Choosing parts for a high-spec custom PC - feedback required [closed]

  - by James

  I'm looking to build a high-spec PC costing under ~£800 (bearing in mind I can get the CPU half price). This is my first time doing this so I have plenty of questions! I have been doing lots of research and this is what I have come up with: http://pcpartpicker.com/uk/p/j4lE Usage: I will be using it for Adobe CS6, rendering in 3DS Max, particle simulations in Realflow and for playing games like GTA IV (and V when it comes out), Crysis 1/2, Saints Row The Third, Deus Ex HR, etc. Questions: Can you see any obvious problem areas with the current setup? Will it be sufficient for the above usage? I won't be doing any overclocking initially. Is it worth buying the H60 liquid cooler, or will the fan that comes with the CPU be sufficient? Is water cooling generally quieter? Is the chosen motherboard good for the current components? And is it future-proof? I read that the HDD is often the bottleneck when it comes to gaming. I presume this is true to other high-end applications? If so, is my selection good? I keep changing my mind about the GPU; first the 560, now the 660. Can anyone shed some light on how to choose? I read mixed opinions about matching the GPU to the CPU. Will the 560 or the 660 be sufficient for my required usage? Atm I'm basing my choice on the PassMark benchmarks and how much they cost. The specs on the GeForce website state that the 560 and the 660 both require 450W. Is this a good figure to base the wattage of my PSU on? If so, how do you decide? Do I really need 750W? The latest GTX 690 requires 650W. Is it a good idea to buy a 750W PSU now to future-proof myself?

  Read the article

• How to store data on a machine whose power gets cut at random

  - by Sevas

  I have a virtual machine (Debian) running on a physical machine host. The virtual machine acts as a buffer for data that it frequently receives over the local network (the period for this data is 0.5s, so a fairly high throughput). Any data received is stored on the virtual machine and repeatedly forwarded to an external server over UDP. Once the external server acknowledges (over UDP) that it has received a data packet, the original data is deleted from the virtual machine and not sent to the external server again. The internet connection that connects the VM and the external server is unreliable, meaning it could be down for days at a time. The physical machine that hosts the VM gets its power cut several times per day at random. There is no way to tell when this is about to happen and it is not possible to add a UPS, a battery, or a similar solution to the system. Originally, the data was stored on a file-based HSQLDB database on the virtual machine. However, the frequent power cuts eventually cause the database script file to become corrupted (not at the file system level, i.e. it is readable, but HSQLDB can't make sense of it), which leads to my question: How should data be stored in an environment where power cuts can and do happen frequently? One option I can think of is using flat files, saving each packet of data as a file on the file system. This way if a file is corrupted due to loss of power, it can be ignored and the rest of the data remains intact. This poses a few issues however, mainly related to the amount of data likely being stored on the virtual machine. At 0.5s between each piece of data, 1,728,000 files will be generated in 10 days. This at least means using a file system with an increased number of inodes to store this data (the current file system setup ran out of inodes at ~250,000 messages and 30% disk space used). Also, it is hard (not impossible) to manage. Are there any other options? Are there database engines that run on Debian that would not get corrupted by power cuts? Also, what file system should be used for this? ext3 is what is used at the moment. The software that runs on the virtual machine is written using Java 6, so hopefully the solution would not be incompatible.

  Read the article

• Apache's htcacheclean doesn't scale: How to tame a huge Apache disk_cache?

  - by flight

  We have an Apache setup with a huge disk_cache (500.000 entries, 50 GB disk space used). The cache grows by 16 GB every day. My problem is that the cache seems to be growing nearly as fast as it's possible to remove files and directories from the cache filesystem! The cache partition is an ext3 filesystem (100GB, "-t news") on an iSCSI storage. The Apache server (which acts as a caching proxy) is a VM. The disk_cache is configured with CacheDirLevels=2 and CacheDirLength=1, and includes variants. A typical file path is "/htcache/B/x/i_iGfmmHhxJRheg8NHcQ.header.vary/A/W/oGX3MAV3q0bWl30YmA_A.header". When I try to call htcacheclean to tame the cache (non-daemon mode, "htcacheclean-t -p/htcache -l15G"), IOwait is going through the roof for several hours. Without any visible action. Only after hours, htcacheclean starts to delete files from the cache partition, which takes a couple more hours. (A similar problem was brought up in the Apache mailing list in 2009, without a solution: http://www.mail-archive.com/[email protected]/msg42683.html) The high IOwait leads to problems with the stability of the web server (the bridge to the Tomcat backend server sometimes stalls). I came up with my own prune script, which removes files and directories from random subdirectories of the cache. Only to find that the deletion rate of the script is just slightly higher than the cache growth rate. The script takes ~10 seconds to read the a subdirectory (e.g. /htcache/B/x) and frees some 5 MB of disk space. In this 10 seconds, the cache has grown by another 2 MB. As with htcacheclean, IOwait goes up to 25% when running the prune script continuously. Any idea? Is this a problem specific to the (rather slow) iSCSI storage? Should I choose a different file system for a huge disk_cache? ext2? ext4? Are there any kernel parameter optimizations for this kind of scenario? (I already tried the deadline scheduler and a smaller read_ahead_kb, without effect).

  Read the article

• Issue using a "used" SSD as a Windows 8.1 Boot Drive

  - by EpiGrad

  So, I'm something of a Mac person, but decided to take a stab at this whole "build yourself a PC" thing - right now, the thing is assembled, posts just fine, and can get to the BIOS. The problem is the drive I want to use - I intended to use a 80 GB Corsair SSD I've had sitting around as the boot drive, and a new Samsung SSD for games and the like. So I boot using a Windows 8.1 install USB stick, and if the Samsung drive is plugged in, it happily offers to install Windows on it. The Corsair drive though, it's flipped out - I reformatted it as a blank NTFS drive (it was HFS for Mac purposes) and the BIOS can't see it, nor can the Windows installer. What's wrong, and how do I fix it? The tools at my disposal are: The current ASUS BIOS that came with my motherboard (a Z87I-Deluxe), a Mac running the latest OS X which can also boot to Windows 7 if needed via either Parallels or Bootcamp. Update 1: Update: Based on a friend's suggestion to switch SATA ports, Windows 8.1's installer can now see the drive as Drive 0, Partition 1, a 83.8 GB "Primary" partition. But when I click it and hit "Next", I get the following error: "We couldn't create a new partition or locate an existing one. For more information, see the Setup log files" - not that it gives any clue how to access those. Update 2: Following a trail of Google suggestions, I ended up going into advanced tools and just reformatting the drive as follows: Start DISKPART. Type LIST DISK and identify your SSD disk number (from 0 to n disks). Type SELECT DISK <n> where <n> is your SSD disk number. Type CLEAN Type CREATE PARTITION PRIMARY Type ACTIVE Type FORMAT FS=NTFS QUICK Type ASSIGN Type EXIT twice (one to get out of DiskPart, the other to exit the command line tool) Per these instructions. This goes well enough, but now I can select the disk for installation, and I get a new error: "Windows 8 cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GP disks." So, Googling that, I do the following: select disk 0 clean convert gpt exit ...and we might have fixed it. Windows is at least trying to install now.

  Read the article

• Apache certificates for some urls not working

  - by Vegaasen

  We are having a rather strange problem with a Apache-installation. Here is a short summary: Currently I'm setting up Apache with https, and server-certificates. This is fairly easy and works straight out of the box - as expected. This is the configuration for this setup: Listen 443 SSLEngine on SSLCertificateFile "/progs/apache/ssl/example-site.no.pem" SSLCertificateKeyFile "/progs/apache/ssl/example-site.no.key" SSLCACertificateFile "/progs/apache/ssl/ca/example_root.pem" SSLCADNRequestFile "/progs/apache/ssl/ca/example_intermediate.pem" SSLVerifyClient none SSLVerifyDepth 3 SSLOptions +StdEnvVars +ExportCertData RequestHeader set ssl-ClientCert-Subject-CN "%{SSL_CLIENT_S_DN}s" RewriteEngine On ProxyPreserveHost On ProxyRequests On SSLProxyEngine On ... <LocationMatch /secureStuff/$> SSLVerifyClient require Order deny,allow Allow from All </LocationMatch> ... <Proxy balancer://exBalancer> Header add Set-Cookie "EX_ROUTE=EB.%{BALANCER_WORKER_ROUTE}e; path=/" env=BALANCER_ROUTE_CHANGED BalancerMember http://10.0.0.1:7200 route=ee1 retry=300 flushpackets=off keepalive=on BalancerMember http://10.0.0.2:7200 route=ee2 retry=300 flushpackets=off keepalive=on status=+H ProxySet stickysession=EX_ROUTE scolonpathdelim=Off timeout=10 nofailover=off failonstatus=505 maxattempts=1 lbmethod=bybusyness Order deny,allow Allow from all </Proxy> RewriteCond %{REQUEST_URI} !^/index.html [NC] RewriteRule ^/(.*)$ balancer://exBalancer/$1 [P,NC] ProxyPassReverse / balancer://exBalancer/ Header edit Set-Cookie "(.*)" "$1;HttpsOnly" ... So - everything works fine and as expected for all of the pages that are not a part of the LocationMatch-directive. When requesting something that matches the LocationMatch-directive, I'm asked for a certificate (hence the SSLVerifyClient required attribute) - and getting all the correct certificates in my browser that is based on the root/intermediate chain. After choosing a certificate and clicking "OK", this is what pops up in the apache logs: [ssl:info] [pid 9530:tid 25] [client :43357] AH01998: Connection closed to child 86 with abortive shutdown ( [Thu Oct 11 09:27:36.221876 2012] [ssl:debug] [pid 9530:tid 25] ssl_engine_io.c(1171): (70014)End of file found: [client 10.235.128.55:45846] AH02007: SSL handshake interrupted by system [Hint: Stop button pressed in browser?!] And this just spams the logs. What is happening here? I can see this configuration working on my local machine, but not on one of our servers. There is no configration differences between the servers, only minor application-wise-changes. I've tried the following: 1) Removing CA-certificate-checking (works) 2) Adding required CA-certificate for the whole site (works) 3) Adding "SSLVerifyClient optional" does not work 4) ++ Server/Application Information Local: -OpenSSL v.1.0.1x -Apache 2.4.3 -Ubuntu -mpm: event -every configuration should be turned on (failing) server: -OpenSSL 0.9.8e -Apache 2.4.2 -SunOS -mpm: worker -every configuration should be turned on Please let me know if more information is needed, I'll provide it instantly. Brief sum-up: -Running apache 2.4 -Server certificates works just fine -Client certificates for some /Locations does not work, fails with errors PS: Could it be related with the OpenSSL version and the "Renegotiation" stuff related to TLS/SSLv3?

  Read the article

• nginx rewrite for wikkawiki

  - by Hans

  Just setup WikkaWiki on my server, I have been trying to have the links go from wiki.mysite.info/wikka.php?wakka=Start into wiki.mysite.info/DotMG. I tried following their guide at http://docs.wikkawiki.org/ModRewrite, however it seems incomplete and outdated. Furthermore, as of version 1.3.2 base_url isn't even manually configurable from the wikka.config.php file. I am using version 1.3.2 of WikkaWiki. My nginx virtual hosts file contains: server { listen 80; server_name wiki.mysite.info; root /usr/share/nginx/wikka/; access_log /usr/share/nginx/.access/wikka; error_log /usr/share/nginx/.error/wikka error; location / { index index.php; try_files $uri $uri/ @wikka; } location @wikka { rewrite ^(.*/[^\./]*[^/])$ $1/ last; rewrite ^(.*)$ /wikka.php?wakka=$1 last; } location ~* \.php$ { fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; include /etc/nginx/fastcgi_params; } } Thus far it works, I can go to wiki.mysite.info/APage and it'll display that page, however it doesn't work on all pages, sometime the browser simply downloads the page (For some reason it always downloads the Start page). Also when I go to wiki.mysite.info/ it downloads the wikka.php file... Furthermore, the links on the wiki have the wikka.php?wakka= so whenever I navigate around the wiki, it goes back to being wiki.mysite.info/wikka.php?wakka=APage. I think something is wrong with my rewrite but I can't say for sure. Contents of the fastcgi_params: fastcgi_param QUERY_STRING $query_string; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_param SCRIPT_FILENAME $request_filename; fastcgi_param SCRIPT_NAME $fastcgi_script_name; fastcgi_param REQUEST_URI $request_uri; fastcgi_param DOCUMENT_URI $document_uri; fastcgi_param DOCUMENT_ROOT $document_root; fastcgi_param SERVER_PROTOCOL $server_protocol; fastcgi_param GATEWAY_INTERFACE CGI/1.1; fastcgi_param SERVER_SOFTWARE nginx/$nginx_version; fastcgi_param REMOTE_ADDR $remote_addr; fastcgi_param REMOTE_PORT $remote_port; fastcgi_param SERVER_ADDR $server_addr; fastcgi_param SERVER_PORT $server_port; fastcgi_param SERVER_NAME $server_name; fastcgi_param HTTPS $server_https; # PHP only, required if PHP was built with --enable-force-cgi-redirect fastcgi_param REDIRECT_STATUS 200;

  Read the article

• My USB bootable thumb drive, no longer boots on a single particular computer on which it previously worked

  - by LiamMeron

  I created a bootable drive, booting CrunchBang, about 2 months ago. About a month ago, I booted into it on another laptop. After shutting down, I have been unable to get it to boot on my own laptop, despite having worked previously. I can still boot into it on my desktop, and can also boot into it on all other computers that I have tried. If I plug it in when I am running Ubuntu, the Home and / folders mount, the only error being that for some reason my PC likes to try and mount the swap partition too, which naturally, gives an error. The BIOS settings are all still setup to boot from USB. When I boot, all I get is a black screen with the white cursor, it will stay there for as long as I leave it. If it is worth anything, I have GRUB loader installed on the drive. The partitions look a little odd, but I am rather unfamiliar with how they are dealt with. The first partition, /, is sdb1 and has the bootable flag. The second partition is an extended system, and is sdb2. The third partition, according to GParted, seems to be nested under the second. This is the swap partition, and it is sdb5 The fourth partition is my home partition and is sdb6 and is also nested under the extended system. The first and fourth partitions are ext4. I don't know if that helps, but the more info, the better accuracy, generally. Thanks. EDIT: I tried reinstalling GRUB on the drive, but that didn't work. However, when I reinstalled GRUB on my laptop, I did it with my USB thumbdrive in. This caused the GRUB updater to find the /boot folder and add the proper details into my laptop's GRUB loader. I could log into CrunchBang from my laptop's GRUB but I was still unable to boot directly to the drive. It looked like my BIOS is unable to find the bootloader. I am unable to install GRUB to a partition I just created, a /boot partition at the start of the drive, GRUB just doesn't allow it. I think I'm going to have to reinstall #! on my drive, which won't be a great loss as I haven't put much time into it.

  Read the article

• Local dns for testing websites using mobile devices

  - by Morpheu5

  Hi. I have no idea where to start from so sorry in advance if this topic has already been discussed. I usually develop web sites using my laptop as a development server, and recently I needed to test a web site using various mobile devices that can connect via wifi. Having no real AP, I set up a ad-hoc network using my laptop's wireless card and the devices can correctly browse the Internet and access the laptop's web server. The setup is as follows: subnet: 192.168.1.0/24 gateway to the Internet (wired adsl router/modem): 192.168.1.1 laptop: 192.168.1.64 (eth0, wired if connected to the gateway) and 192.168.1.32 (eth1, wifi if somewhat bridged to eth0) mobile devices (same for all, I only use one of them at any time for simplicity): 192.168.1.11 with default gw 192.168.1.1 Now, if I open either 192.168.1.32 or 192.168.1.64 from the mobile devices, I correctly get the default host of my Apache configuration. However I usually work with virtual hosts for many practical reasons, one of which being Drupal's peculiar implementation of multi-sites. For those who don't know how this works, Drupal takes the request's hostname and searches into its sites/ subdirectories for an appropriate configuration file. So, for example, suppose I request www.example.com, then Drupal would search for a config file in the following directories: sites/www.example.com/ sites/example.com/ sites/com/ sites/default/ So I decided to adopt the following style of virtual hosts: if the website I'm working on will be accessible using www.example.com I set up a sites/www.example.com/ directory and create a virtual host for local.www.example.com so Drupal have no trouble finding it. I've been told this is suboptimal from a dns point of view since I'd have to create an authoritative entry for example.com and turn Bind on only when I'm supposed to access the local copy, which is weird. However, if this is the only path I can follow, I still have some problems with Bind's configuration, as I couldn't find any guide that tells me in a clear, noob-friendly way, how to set up such an entry. On the other hand, I was wondering if I could set up an authoritative entry for local, so I could access www.example.com.local and tell in some way (which I don't even know if this is possible) Apache to put www.example.com instead of www.example.com.local in the relevant environment variable. Anyway, I have a last problem, sort of: when I launch Bind in debug mode with high verbosity, and make 192.168.1.32 as the primary dns for the devices, the output doesn't say anything about requests being made from the devices to Bind, so I'm not even sure it comes into play. As you can see, I'm a complete noob at these matters, but I'm eager to learn, so any help/pointer will be appreciated.

  Read the article

• debugging JBoss 100% CPU usage

  - by Nate

  We are using JBoss to run two of our WARs. One is our web app, the other is our web service. The web app accesses a database on another machine and makes requests to the web service. The web service makes JMS requests to other machines, aggregates the data, and returns it. At our biggest client, about once a month the JBoss Java process takes 100% of all CPUs. The machine running JBoss has 8 CPUs. Our web app is still accessible during this time, however pages take about 3 minutes to load. Restarting JBoss restores everything to normal. The database machine and all the other machines are fine, only the machine running JBoss is affected. Memory usage is normal. Network utilization is normal. There are no suspect error messages in the JBoss logs. I have set up a test environment as close as possible to the client's production environment and I've done load testing with as much as 2x the number of concurrent users. I have not gotten my test environment to replicate the problem. Where do we go from here? How can we narrow down the problem? Currently the only plan we have is to wait until the problem occurs in production on its own, then do some debugging to determine the cause. So far people have just restarted JBoss when the problem occurred to minimize down time. Next time it happens they will get a developer to take a look. The question is, next time it happens, what can be done to determine the cause? We could setup a separate JBoss instance on the same box and install the web app separately from the web service. This way when the problem next occurs we will know which WAR has the problem (assuming it is our code). This doesn't narrow it down much though. Should I enable JMX remote? This way the next time the problem occurs I can connect with VisualVM and see which threads are taking the CPU and what the hell they are doing. However, is there a significant down side to enabling JMX remote in a production environment? Is there another way to see what threads are eating the CPU and to get a stacktrace to see what they are doing? Any other ideas? Thanks!

  Read the article

• Convert apache rewrite rules to nginx

  - by Shiyu Sekam

  I want to migrate an Apache setup to Nginx, but I can't get the rewrite rules working in Nginx. I had a look on the official nginx documentation, but still some trouble converting it. http://nginx.org/en/docs/http/converting_rewrite_rules.html I've used http://winginx.com/en/htaccess to convert my rules, but this just works partly. The / part looks okay, the /library part as well, but the /public part doesn't work at all. Apache part: ServerAdmin webmaster@localhost DocumentRoot /srv/www/Web Order allow,deny Allow from all RewriteEngine On RewriteRule ^$ public/ [L] RewriteRule (.*) public/$1 [L] Order Deny,Allow Deny from all RewriteEngine On RewriteCond %{QUERY_STRING} ^pid=([0-9]*)$ RewriteRule ^places(.*)$ index.php?url=places/view/%1 [PT,L] # Extract search query in /search?q={query}&l={location} RewriteCond %{QUERY_STRING} ^q=(.*)&l=(.*)$ RewriteRule ^(.*)$ index.php?url=search/index/%1/%2 [PT,L] # Extract search query in /search?q={query} RewriteCond %{QUERY_STRING} ^q=(.*)$ RewriteRule ^(.*)$ index.php?url=search/index/%1 [PT,L] RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d # Rewrite all other URLs to index.php/URL RewriteRule ^(.*)$ index.php?url=$1 [PT,L] Order deny,allow deny from all ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn AddHandler php5-fcgi .php Action php5-fcgi /php5-fcgi Alias /php5-fcgi /usr/lib/cgi-bin/php5-fcgi FastCgiExternalServer /usr/lib/cgi-bin/php5-fcgi -socket /var/run/php5-fpm.sock -pass-header Authorization CustomLog ${APACHE_LOG_DIR}/access.log combined Nginx config: server { #listen 80; ## listen for ipv4; this line is default and implied root /srv/www/Web; index index.html index.php; server_name localhost; location / { rewrite ^/$ /public/ break; rewrite ^(.*)$ /public/$1 break; } location /library { deny all; } location /public { if ($query_string ~ "^pid=([0-9]*)$"){ rewrite ^/places(.*)$ /index.php?url=places/view/%1 break; } if ($query_string ~ "^q=(.*)&l=(.*)$"){ rewrite ^(.*)$ /index.php?url=search/index/%1/%2 break; } if ($query_string ~ "^q=(.*)$"){ rewrite ^(.*)$ /index.php?url=search/index/%1 break; } if (!-e $request_filename){ rewrite ^(.*)$ /index.php?url=$1 break; } } location ~ \.php$ { fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_index index.php; include fastcgi_params; } } I haven't written the original ruleset, so I've a hard time converting it. Would you mind giving me a hint how to do it easily or can you help me to convert it, please? I really want to switch over to php5-fpm and nginx :) Thanks

  Read the article

• Setting Up My Server to Do DNS On OpenSuse 11.3

  - by adaykin

  Hello, I am attempting to use my server to be a DNS server. I am having trouble getting the domain setup. Here is what I have so far: /var/lib/named/master/andydaykin.com: $TTL 2d @ IN SOA andydaykin.com. root.andydaykin.com. ( 2011011000 ; serial 0 ; refresh 0 ; retry 0 ; expiry 0 ) ; minimum andydaykin.com. IN NS ns1.andydaykin.com. andydaykin.com. IN SOA ns1.andydaykin.com. hostmaster.andydaykin.com. ( @.andydaykin.com. IN NS ns1.andydaykin.com. ns1.andydaykin.com. IN A 204.12.227.33 www.andydaykin.com. IN A 204.12.227.33 /etc/resolve.conf: search andydaykin.com nameserver 204.12.227.33 /etc/named.conf: options { # The directory statement defines the name server's working directory directory "/var/lib/named"; dump-file "/var/log/named_dump.db"; statistics-file "/var/log/named.stats"; listen-on port 53 { 127.0.0.1; }; listen-on-v6 { any; }; notify no; disable-empty-zone "1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.IP6.ARPA"; include "/etc/named.d/forwarders.conf"; }; zone "." in { type hint; file "root.hint"; }; zone "localhost" in { type master; file "localhost.zone"; }; zone "0.0.127.in-addr.arpa" in { type master; file "127.0.0.zone"; }; Include the meta include file generated by createNamedConfInclude. This includes all files as configured in NAMED_CONF_INCLUDE_FILES from /etc/sysconfig/named include "/etc/named.conf.include"; zone "andydaykin.com" in { file "master/andydaykin.com"; type master; allow-transfer { any; }; }; logging { category default { log_syslog; }; channel log_syslog { syslog; }; }; What I am doing wrong?

  Read the article

• Why isn't passwordless ssh working?

  - by Nelson

  I have two Ubuntu Server machines sitting at home. One is 192.168.1.15 (we'll call this 15), and the other is 192.168.1.25 (we'll call this 25). For some reason, when I want to setup passwordless login from 15 to 25, it works like a champ. When I repeat the steps on 25, so that 25 can login without a password on 15, no dice. I have checked both sshd_config files. Both have: RSAAuthentication yes PubkeyAuthentication yes I have checked permissions on both servers: drwx------ 2 bion2 bion2 4096 Dec 4 12:51 .ssh -rw------- 1 bion2 bion2 398 Dec 4 13:10 authorized_keys On 25. drwx------ 2 shimdidly shimdidly 4096 Dec 4 19:15 .ssh -rw------- 1 shimdidly shimdidly 1018 Dec 4 18:54 authorized_keys On 15. I just don't understand when things would work one way and not the other. I know it's probably something obvious just staring me in the face, but for the life of me, I can't figure out what is going on. Here's what ssh -v says when I try to ssh from 25 to 15: ssh -v -p 51337 192.168.1.15 OpenSSH_5.9p1 Debian-5ubuntu1, OpenSSL 1.0.1 14 Mar 2012 debug1: Reading configuration data /etc/ssh/ssh_config debug1: /etc/ssh/ssh_config line 19: Applying options for * debug1: Connecting to 192.168.1.15 [192.168.1.15] port 51337. debug1: Connection established. debug1: identity file /home/shimdidly/.ssh/id_rsa type 1 debug1: Checking blacklist file /usr/share/ssh/blacklist.RSA-2048 debug1: Checking blacklist file /etc/ssh/blacklist.RSA-2048 debug1: identity file /home/shimdidly/.ssh/id_rsa-cert type -1 debug1: identity file /home/shimdidly/.ssh/id_dsa type 2 debug1: Checking blacklist file /usr/share/ssh/blacklist.DSA-1024 debug1: Checking blacklist file /etc/ssh/blacklist.DSA-1024 debug1: identity file /home/shimdidly/.ssh/id_dsa-cert type -1 debug1: identity file /home/shimdidly/.ssh/id_ecdsa type -1 debug1: identity file /home/shimdidly/.ssh/id_ecdsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.9p1 Debian-5ubuntu1 debug1: match: OpenSSH_5.9p1 Debian-5ubuntu1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.9p1 Debian-5ubuntu1 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: sending SSH2_MSG_KEX_ECDH_INIT debug1: expecting SSH2_MSG_KEX_ECDH_REPLY debug1: Server host key: ECDSA 54:5c:60:80:74:ab:ab:31:36:a1:d3:9b:db:31:2a:ee debug1: Host '[192.168.1.15]:51337' is known and matches the ECDSA host key. debug1: Found key in /home/shimdidly/.ssh/known_hosts:2 debug1: ssh_ecdsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password debug1: Next authentication method: publickey debug1: Offering RSA public key: /home/shimdidly/.ssh/id_rsa debug1: Authentications that can continue: publickey,password debug1: Offering DSA public key: /home/shimdidly/.ssh/id_dsa debug1: Authentications that can continue: publickey,password debug1: Trying private key: /home/shimdidly/.ssh/id_ecdsa debug1: Next authentication method: password

  Read the article

• SQL Express 2008 R2 on Amazon EC2 instance: tons of free memory, poor performance

  - by gravyface

  The old SQL Express 2005 was running on a low-end single Xeon CPU Dell server, RAID 5 7200 disks, 2 GB RAM (SBS 2003). I have not done any baseline measurements on the old physical server, but the Web app is used by half a dozen people (maybe 2 concurrently), so I figured "how bad can an Amazon EC2 instance be?". It's pretty horrible: a difference of 8 seconds of load time on one screen. First of all, I'm not a SQL guru, but here's what I've tried: Had a Small Instance, now running a c1.medium (High Cpu Medium) Windows 2008 32-bit R2 EBS-backed instance running IIS 7.5 and SQL Express 2008 R2. No noticeable improvement. Changed Page File from fixed 256 to Automatic. Setup a Striped Mirror from within Disk Management with two attached 1 GB EBS volumes. Moved database and transaction log, left everything else on the boot EBS volume. No noticeable change. Looked at memory, ~1000 MB of physical memory free (1.7 GB total). Changed SQL instance to use a minimum of 1024 RAM; restarted server, no change in memory usage. SQL still only using ~28MB of RAM(!). So I'm thinking: this database is tiny (28MB), why isn't the whole thing cached in RAM? Surely that would speed up performance. The transaction log is 241 MB. Seems kind of large in comparison -- has this not been committed? Is it a cause of performance degradation? I recall something about Recovery Models and log sizes somewhere in my travels, but not positive. Another thing: the old server was running SQL Express 2005. Not sure if that has any impact, but I tried changing the compatibility level from SQL 2000 to 2008, but that had no effect. Anyways, what else can I try here? Seems ridiculous to throw more virtual hardware at this thing. I know I/O is going to be rough on EBS volumes, but surely others are successfully running small .NET/SQL apps on reasonably priced instances?

  Read the article

• Cannot get to configure Kerberos for Reporting Services

  - by Ucodia

  Context I am trying to configure Kerberos in the domain for double-hop authentication. So here are the machines and their respective roles: client01: Windows 7 as client dc01: Windows Server 2008 R2 as domain controller and dns server01: Windows Server 2008 R2 as reporting server (native mode) server02: Windows Server 2008 R2 as SQL Server database engine I want my client01 to connect to server01 and configure a data source that is located on server02 using Intergrated Security. So as NTLM cannot push credentials that far, I need to setup Kerberos to enable double-hop authentication. The reporting service is runned by the Network Service service account and is configured only with the RSWindowsNegotiate options for authentication. Issue I cannot get to pass my client01 credential to server02 when configuring the data source on server01. Therefore I get the error: Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'. So I went on dc01 and delegated full trust for any service to server01 but it not fixed the problem. I want to notice that I did not configured any SPNs for server01 because Reporting Service is runned by Network Service and from what I read on the Internet, when Reporting Services is going up with Network Service, SPNs are automatically registered. My problem is that even if that I want to configure SPNs manually, I do not know where I have to set them up. On dc01 or on server01? So I went a bit further on the issue and tried to trace this problem. From my understanding of Kerberos, this is what should happen on the network when I try to connect the data source: client01 ---- AS_REQ ---> dc01 <--- AS_REP ---- client01 ---- TGS_REQ ---> dc01 <--- TGS_REP ---- client01 ---- AP_REQ ---> server01 <--- AP_REP ---- server01 ---- TGS_REQ ---> dc01 <--- TGS_REP ---- server01 ---- AP_REQ ---> server02 <--- AP_REP ---- So captured my local network with Wireshark, but whenever I try to configure my data source from client01 on server01 to pass my credentials to server02, my client never sends a AS_REQ or TGS_REQ to the KDC on dc01. Questions So does anyone can tell me if I should configure the SPNs and on which machine does it have to be configured? Also why client01 never request for a TGT or a TGS to my KDC. Do you think there is something going wrong with the DC role of dc01?

  Read the article

• Remote Debian System Preventing Logon

  - by choobablue

  I have a dozen or so single board computers on a network running Debian (squeeze) and access them via ssh (ssh server is dropbear). To give an idea of the hardware of these computers they're 1.2 GHz x86 processors, 1GB of RAM and 4GB flash drives formatted as ext2 (I avoided ext3 to prevent the added flash write stress from journaling), there is also a swap partition on the drive. Normally the setup I'm using works great and I can access all the computers. Every once in a while one will prevent access. What happens is I try to connect via ssh (putty) and it gives me the login prompt, I enter the username and password and it responds 'Access Denied' and it will also refuse any public key in ~/.ssh/authorized_keys. The credentials are correct as they worked previously. The computer responds to pings and putty recognizes the server public key, which implies to me the system is still running. Restarting the server fixes the problem and I can log in again. (I tried a temporary fix of putting shutdown -r now in the root crontab but this doesn't seem to reliably be run once the hang happens) Once I restart however there doesn't seem to be any information in any of the system logs to indicate what happened, the logs are simply empty for that time period, as if the system had crashed. There is some custom software running on the system which appears to stop working (which is why I wanted to ssh to begin with). I'm assuming that this program is the source of the problems but I'm unsure of how it would cause it and how to debug what is happening. The most likely explanation I can think of is that there is a memory leak in the other program that then prevents dropbear from spawning a new login shell (and crontab from executing shutdown) as there is not enough free memory. But looking at memory usage of the other (working) computers there doesn't seem to be any meaningful increase in memory to indicate a leak (unless it's a very big, fast acting and rare leak). I would think that when the OS ran out of memory it would restart the system or kill processes (the Linux kernel restarts right?). The other thing I wonder about is if the fact that they are running off a flash drive could have some effect, especially the swap partition (which I think I should remove to prevent wear of the flash), but the flash drives are young (~1 month) and I don't think that wear would be a factor yet. Does anybody have an idea of what could cause these symptoms, if it could be done by a memory leak, or something else I haven't thought of. And does anybody know of a method to try to debug the problem and find out more information about what's going wrong?

  Read the article

< Previous Page | 567 568 569 570 571 572 573 574 575 576 577 578  | Next Page >